Operating Instructions
Blu-ray Disc Player
Model No. DMP-BDT300
DMP-BDT350
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future
reference.
U.S.A. and Puerto Rico : The warranty can be found on
page 46.
Canada :The warranty can be found on page 47.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
La referencia rápida en español se puede encontrar en la página 48.
PP
VQT2J87
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Getting started
Settings
IMPORTANT SAFETY
Playback menu . . . . . . . . . . . . . . . . 28
Setup menu . . . . . . . . . . . . . . . . . . 30
INSTRUCTIONS. . . . . . . . . . . . . . . . 2
Accessory . . . . . . . . . . . . . . . . . . . . . 4
Unit and media care . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . 5
Playable discs/Cards/
Reference
Troubleshooting guide . . . . . . . . . . 34
Messages . . . . . . . . . . . . . . . . . . . . 37
Audio Information . . . . . . . . . . . . . . 38
About MP3/JPEG/DivX/
USB devices . . . . . . . . . . . . . . . . . . . 6
Connections & Settings
AVCHD/MPEG2 files . . . . . . . . . . . 40
Supplemental information. . . . . . . . 42
Specifications . . . . . . . . . . . . . . . . . 43
Glossary . . . . . . . . . . . . . . . . . . . . . 45
Limited Warranty
STEP 1 : Connecting to a TV . . . . . . 8
STEP 2 : Connecting to
an amplifier/receiver . . . . 10
STEP 3 : Connecting to
a broadband network. . . . 12
STEP 4 : Connecting to
(ONLY FOR U.S.A. AND PUERTO RICO) . . . 46
Limited Warranty
an AC power . . . . . . . . . . 14
STEP 5 : Setting . . . . . . . . . . . . . . . 14
STEP 6 : Reprogramming
(Only for CANADA). . . . . . . . . . . . . 47
Referencia rápida en español
(Spanish Quick Reference) . . . . . . . . . . 48
Index. . . . . . . . . . . . . . . . . . . . . . . . 49
the remote control . . . . . . 17
About descriptions in these operating
instructions
≥ Instructions for operations are generally described
Playback
using the remote control.
≥ These operating instructions are applicable to models
DMP-BDT300 and DMP-BDT350.
[BDT300] [BDT350] : indicates features applicable to
DMP-BDT300 and DMP-BDT350, respectively.
Inserting or removing media . . . . . . 18
FUNCTIONS menu. . . . . . . . . . . . . 18
Playing video contents . . . . . . . . . . 19
Enjoying 3D video. . . . . . . . . . . . . . 23
Playing still pictures . . . . . . . . . . . . 24
Playing music . . . . . . . . . . . . . . . . . 25
Enjoying VIERA CASTTM. . . . . . . . . 25
DLNA feature [BDT350]. . . . . . . . . . . . . 26
Linked operations with the TV
About Firmware updates (> 17)
TM
TM
(VIERA Link “HDAVI Control ”). . . . . . . . . . . 27
3
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory
Unit and media care
Check the supplied accessories before using this unit.
∫ Clean this unit with a soft, dry cloth
1
Remote control
≥ Never use alcohol, paint thinner or benzine to clean this
(N2QAYB000508)
unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
1
Audio/Video cable
(K2KA6BA00004)
2
1
Batteries for remote control
AC power supply cord
(K2CB2CB00022)
∫ Clean the lens with the lens cleaner
1
1
Wireless LAN Adaptor (DY-WL10*)
(C5ZZZ0000048)
disc
Lens cleaner disc: RP-CL720PP (not included)
≥ This lens cleaner is sold as specific for DIGA, but can be
used on this unit as well.
USB extension cable (DY-WL10*)
(K2KYYYY00064)
* DY-WL10 includes Wireless LAN Adaptor and USB
extension cable, and it is sold in the market.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to
the English display on the front and back side of the unit.
∫ Clean discs
DO NOT
DO
≥ Product numbers correct as of January 2010. These may be subject to
change.
Wipe with a damp cloth and then wipe dry.
≥ Do not use AC power supply cord and Wireless LAN Adaptor with other
equipment. Wireless LAN Adaptor is not designed to use with PC.
≥ MAC address is stated on the bottom of Wireless LAN Adaptor.
≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory
Purchases (United States and Puerto Rico)” on page 46.
For other areas: To order accessories, call the dealer from whom you
have made your purchase.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
Using the remote control
Insert so the poles (i and j) match those in the remote
≥ Do not use the following discs:
control.
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (>34, “To return all settings to the
factory preset.”)
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at remote control signal sensor on this unit. (> 5)
≥ The operation history may be recorded in the memory of
this unit.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
4
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
1
2
Turn the unit on and off (> 14)
Open or close the disc tray (> 18)
CAUTION
12
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
1
13
3
Select title numbers, etc./Enter numbers or characters
(> 25)
2
[CANCEL] : Cancel
4
5
6
7
8
9
Basic playback control buttons (> 19)
Show status messages (> 19)
Show Top menu/Direct Navigator (> 19)
Selection/OK, Frame-by-frame (> 19)
Show sub menu (> 20)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
14
3
15
16
4
≥ Displaying “Title View” and “Album View” screens.
(> 24)
≥ Operating contents of VIERA CAST. (> 25)
10 Show Setup menu (> 30)
5
6
17
18
11 Switch on/off Secondary Video (Picture-in-picture) (> 21)
12 Transmit the remote control signal
13 TV operation buttons (> 17)
19
You can operate the TV through the unit’s remote control.
[Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[i j VOL] : Adjust the volume
[W X CH] : Channel select
7
8
9
20
14 Adjust the volume of an amplifier/receiver.
15 Select audio (> 19)
16 Displays the Home screen of the VIERA CAST (> 25)
17 Exit the menu screen
10
11
21
22
18 Show Pop-up menu (> 19)
19 Show Functions menu (> 18)
20 Return to previous screen
21 Select drive (BD/DVD/CD, SD card or USB device)
(> 18)
22 Show Playback menu (> 28)
1
2
3
4 5
6
Pull to flip down
the front panel.
7 8
9 10 11
5
Remote control signal sensor
1
POWER button (POWER Í/I) (> 14)
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and right
Open or close the disc tray (> 18)
SD Card LED
≥ It is possible to set the LED to turn on/off. (> 31)
SD card slot (> 18)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Disc tray (> 18)
Display
6
7
2
3
8
9
USB port (> 18)
10 Stop (> 19)
11 Start play (> 19)
Disc indicator SD card indicator USB device indicator
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
Rear panel terminals (> 8–14)
4
V.OFF LED (Video off LED)
≥ It is possible to set the LED to turn on/off. (> 31)
5
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs/Cards/USB devices
Type
Logo examples
Type detail
Playable contents
BD-Video
Video
Video
JPEG
BD-RE
BD-R
BD
Video
DivX®
DVD-Video
DVD-RAM
Video
Video
AVCHD
JPEG
DVD-R
Video
AVCHD
DivX
DVD
MP3
DVD-R DL
DVD-RW
JPEG
Video
AVCHD
—
—
+R/+RW/+R DL
Music CD
Music [CD-DA]
DivX
Music [CD-DA]
MP3
CD
CD-R
CD-RW
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC Card)
MPEG2
AVCHD
JPEG
SD
SDXC Memory Card (48 GB, 64 GB)
(Includes microSDXC Card)
DivX
MP3
JPEG
USB devices
(up to 128 GB)
—
USB
6
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Discs that cannot be played in this unit
∫ SD card
Any other disc that is not specifically supported or
previously described.
≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Keep the Memory Card out of reach of children
to prevent swallowing.
≥ Video CD and Super Video CD
≥ WMA discs
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ PAL discs
≥ HD DVD
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code A.
≥ Useable memory may be slightly less than the card
capacity.
Example:
∫ USB device
≥ This unit supports connecting a USB memory, digital
camera and video camera produced by Panasonic, etc. It is
not warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played, so you may
not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
1
2
1
ALL
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play
on this unit. Please refer to the recorder’s instructions.
∫ BD-Video
≥ 3D videos can be played back when this unit is connected
to a 3D compatible TV using an HDMI cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video. In order to
enjoy these audio formats, refer to page 38.
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
7
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
Highest Quality
(VIDEO)
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
≥ Refer to page 39, about recommended settings for each
piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos by connecting this
unit with a 3D compatible TV.
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
HDMI IN
HDMI cable
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
8
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard Quality
(VIDEO)
∫ Via a COMPONENT VIDEO OUT terminal
∫ Via a VIDEO OUT terminal
AUDIO IN
AUDIO IN
R
L
VIDEO IN
COMPONENT VIDEO IN
R
L
Audio/Video
cable
(included)
Component
Video cable
Audio/Video
cable (included)
≥ Connect terminals of the same color.
≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to “480p”, “720p” or
“1080i” (> 32).
≥ Set “HDMI Video Mode” to “Off” (> 32).
9
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos when the connected
TV and amplifier/receiver are 3D compatible.
∫ Via an HDMI MAIN AV OUT and HDMI SUB AV
OUT terminal
– It is possible to playback 3D videos when the connected
TV is 3D compatible, even if the amplifier/receiver is not
3D compatible.
HDMI IN
HDMI IN
HDMI cable
Multi channel
speakers
Multi channel
speakers
Amplifier/receiver
Amplifier/receiver
HDMI IN
HDMI IN
HDMI cable
HDMI cable
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (> 31).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 23)
– Audio is output in high resolution regardless of
compatibility of the amplifier/receiver with 3D.
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
The HDMI SUB AV OUT terminal is not compatible with the
VIERA Link “HDAVI Control”.
10
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Analog Audio
∫ Via a COAXIAL or OPTICAL terminal
∫ Via a 5.1/7.1ch AUDIO OUT terminal
Multi channel speakers
Amplifier/receiver
Amplifier/receiver
COAXIAL IN
OPTICAL IN
Connect Audio cables to
terminals corresponding
to the speakers you have
connected.
Optical
cable
Coaxial
cable
OR
≥ When connecting a TV (> 8) with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
≥ Set “Digital Audio Output” depending on the used terminal
and connected amplifier/receiver (> 31).
Cable connections
a
b
c
d
e
Front speaker (L/R)
Surround speaker (L/R)
Subwoofer
Center speaker
Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set the “Analog Audio Output” to “7.1ch” or “2ch (Downmix)
+ 5.1ch”, depending on the used terminal (> 32).
≥ You can set the “Analog Audio Output” from the easy setting
(> 14).
≥ When connecting equipment with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
11
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ Firmware can be updated (> 17)
≥ You can enjoy BD-Live (> 21)
≥ You can enjoy VIERA CAST (> 25)
≥ [BDT350] : DLNA feature (> 26)
≥ The unit is not compatible with public wireless LAN services
provided in airports, stations, cafes etc.
∫ Using LAN (ethernet) cable
∫ Using Wireless LAN Adaptor (DY-WL10)
Wireless LAN Adaptor
(included)
LAN Cable
Broadband router, etc.
Wireless router
(Access point), etc.
LAN Cable
[BDT350]
LAN Cable
[BDT350]
DLNA Certified media
server
(Refer to page 26 for more
DLNA Certified media
server
(Refer to page 26 for
Modem (Broadband)
*Provided by ISP
information.)
Modem (Broadband)
*Provided by ISP
more information.)
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Wireless LAN Adaptors other than the included Wireless
LAN Adaptor cannot be used.
≥ Inserting any cable other than a LAN cable in the LAN terminal
can damage the unit.
≥ When connection conditions are poor, use the included
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
For additional information about this unit refer to
12
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions of Wireless LAN Adaptor
The following limits are in place regarding the usage of this device. You must be
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of this device.
aware of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which
may arise due to a failure to obey these limits, or to any condition of use or
disuse of this device.
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic searches in a wireless network environment, wireless net-
works (SSID*) for which you do not have usage rights may be displayed; how-
ever, using these networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
≥ Data transmitted and received over radio waves may be intercepted
and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and
follow the following points:
– Do not expose the adaptor to high temperatures or direct sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible device.
This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to
co-channel Mobile Satellite systems. High power radars are allocated as
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems
are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are
absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue),
exposure to low-level RF that does not produce heating effects causes no
known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.
Wireless LAN Adaptor is prohibited from export or bringing into nations*
upon which the United States place embargoes.
Wireless LAN Adaptor is subject to Export Administration Regulations
(EAR) due to the installation of encryption device made in the United
States. (Current as of November 2009)
* Cuba, Iran, Syria, North Korea, Sudan etc.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in interference
to radio and TV reception. Any changes or modifications not approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
Product Identification Marking is located on the bottom of unit.
13
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4 : Connecting to STEP 5 : Setting
an AC power
Easy Setting
After connecting your new player for the 1st time and pressing
the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
AC power supply cord
(included)
2 Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
To a household AC outlet
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (> 33)
The unit should be installed near an accessible AC power
outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the
power cord from the AC power outlet.
≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select
“7.1ch” if using the 7.1ch output.
Analog Audio Output
Set unit’s analog audio output.
Select only “7.1ch” to enjoy audio from a
receiver through 7.1ch analog connections.
Otherwise, select “2ch (Downmix) + 5.1ch.”
2ch (Downmix) + 5.1ch
7.1ch
OK
RETURN
14
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
When you experience
problems with settings
Network Easy Setting
After completing “Easy Setting”, you can continuously perform
“Network Easy Setting”.
Access Point Connection Setting
1 Select “Wired” or “Wireless” and press
[OK].
Access Point Connection Setting
Failed to connect to the access point.
A conflict with another device occurred.
Do you want to configure Access Point Connection
Setting again ?
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting
:
Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Yes
No
OK
Wired
Display
Check the following
Wireless
OK
A conflict with another
device occurred.
≥ Please wait a few moments,
and then try again.
RETURN
≥ Setting of the Wireless router
(Access point) for MAC Address
etc.
If “Wireless LAN Adaptor is not connected.” is displayed,
check that the Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If there is still no
change in the display, consult your dealer.
A time out error occurred.
≥ The signal may be weak. Using
the included USB extension
cable, adjust the position of the
Wireless LAN Adaptor. Do not
use any other USB extension
cables except the supplied one.
≥ The SSID and the encryption
key of the Wireless router
(Access point).
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
An authentication error or
a time out error occurred.
For wireless LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting “WPS
(PUSH button method)”.
Otherwise, perform the settings by selecting “Search for
access point” or “Manual setting” in “Other methods”.
≥ Please wait a few moments,
and then try again.
≥ Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, contact our Customer
Service Center.
A device error occurred.
Access Point Connection Setting
Select a connection method to use with an access point
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.
WPS (PUSH button method)
Other methods
Search for access point
OK
WPS (PIN code method)
RETURN
Manual setting
≥ WPS (Wi-Fi Protected Setup) is a function that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access
point) supports WPS, check the Wireless router operating
instructions.
15
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Easy Setting (Connection Check)
Network Easy Setting (Connection Check)
Complete.
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 33)
≥ You can redo these settings individually using “Network Settings”. (> 33)
≥ After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router (Access point) might change. When you
have trouble getting online on your PC, perform the network settings on
your PC in accordance with the settings of Wireless router (Access point).
1. LAN cable connection
2. IP address setting
3. Connection to gateway
: Fail
: Fail
: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Yes
OK
No
Check the
following
Display
1. LAN cable connection or
Connection to access point
≥ Connection of
the LAN
: Fail
cables (> 12)
2. IP address setting
: Fail
: Fail
3. Connection to gateway
1. LAN cable connection or
Connection to access point
≥ Connection
and settings
of the hub and
router
≥ Settings of “IP
Address/DNS
Settings”
: Pass
2. IP address setting
: Fail
: Fail
3. Connection to gateway
[BDT350]
1. LAN cable connection or
Connection to access point
:Pass
(> 33)
:
Home
2. IP address setting
network
available
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
: Pass
2. IP address setting
: Pass
: Fail
3. Connection to gateway
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet
:
Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Display
Check the following
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address/
DNS Settings” (> 33)
Cannot find the server.
(Error code: B019)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 33) and the router
Failed to connect to the
server.
(Error code: B020)
16
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 6 :
Reprogramming the
remote control
Firmware updates
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
screen is displayed.
For other Panasonic products
Change “Remote Control Code” (> 33) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the unit’s
remote control.
Yes
No
OK
1
For televisions
RETURN
Input the code (> 42) with the number
buttons while pressing [Í TV POWER].
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on
the unit’s display. Unit will restart and the following screen will
be displayed.
For amplifiers/receivers
Input the code (> 42) with the number
buttons while pressing
[RECEIVER j VOL].
The firmware was updated.
e.g., 0001: [0] B [0] B [0] B [1]
Current Installed Version
:
x.xx
2 Test by turning on the television or
OK
RETURN
adjusting the volume of the amplifier/
receiver.
≥ If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.
≥ You can perform updates anytime by selecting “Firmware Update” in the
Setup menu. (> 33)
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit. (>33, “System
Information”)
≥ Downloading will require several minutes. It may take longer or the
Internet may not be connected depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 33)
17
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Inserting or removing
media
FUNCTIONS menu
Major functions of this unit can be operated from the
FUNCTIONS menu.
Press [3, 4] to select the item and press [OK].
Blu-ray Disc Player
FUNCTIONS
BD-Video
Playback
Top Menu
Network
SD Card
USB device
≥ When inserting a media item, ensure that it is facing the
right way up.
Other Functions
≥ When the indicator on this unit's display blinks, do not turn
off the unit or remove the media. Such action may result in
loss of the media’s contents.
OK
RETURN
≥ When removing the SD card, press on the center of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.
Playback
Play back the contents.
(> 19)
Top Menu
Menu
(> 19)
Viewing Picture
Viewing Video
Listening Music
(> 24)
(> 19)
(> 25)
∫ To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”
[BDT300]
Network
Displays the Home screen of
the VIERA CAST (> 25)
or “USB device”.
≥ If media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
Home
Network
(DLNA)
(> 26)
[BDT350]
Network
Internet
Content
Displays the Home screen of
the VIERA CAST (> 25)
BD/DVD/CD
SD Card
Switches to each drive.
USB device
You can play playlists created
on DVD-VR.
Playlists
Setup
Other
Functions
(> 30)
Card
Management
(> 21)
To exit the screen
Press [FUNCTION MENU].
≥ Items to be displayed may vary with the media.
≥ If FUNCTIONS screen is not displayed, press [FUNCTION MENU].
18
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing video contents
BD DVD CD SD USB
Other operations during play
These functions may not work depending on the media and
contents.
Preparation
Turn on the television and select the appropriate video input
on the television.
Stop
Press [∫].
The stopped position is memorized.
Resume play function
1
Press [1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [∫]
several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J (> 45), the resume
play function does not work.
1 Press [Í POWER] to turn on the unit.
Pause
2 Insert the media.
Press [;].
≥ Press [;] again or [1] (PLAY) to restart play.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ When a message screen is displayed while playing
back 3D compatible video software, play back in
accordance with the instructions.
Search/Slow-motion
Search
While playing, press [6] or [5].
≥ Music and MP3: The speed is fixed to a single step.
≥ If play does not start, press [1] (PLAY).
Slow-motion
While paused, press [6] or [5].
≥ BD-Video and AVCHD: Forward direction [5] only.
∫ To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
The speed increases up to 5 steps.
≥ Press [1] (PLAY) to revert to normal playback speed.
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and
selecting “Pop-up Menu”.
Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
≥ Press and hold to change in succession forward or
backward.
≥ Press [1] (PLAY) to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Elapsed time in the title
BD-Video
T1 C1 0:05.14
Play
0:20.52
Changing audio
Current position
Total time
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 28), etc.
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
19
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions
1 Press [SUB MENU].
2 Select an item, then press [OK].
While Direct Navigator screen is displayed
To display the titles properties (recording
date, etc.).
Properties
View
To select the chapter.
Chapters
To picture
Playing still pictures (> 24).
Select
Folder
To switch to another folder.
While playing
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Screen
Aspect
Top Menu
To display Top Menu.
To display Pop-up Menu.
To display Menu.
Pop-up
Menu
Menu
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 32) is set to “4:3 Pan & Scan” or “4:3
Letterbox”, the “Zoom” effect in “Screen Aspect” is disabled.
≥ Depending on the media and contents, displayed items are different.
20
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-Live discs with
Internet
Enjoying BD-Live or
BONUSVIEW in BD-Video
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access
the BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you
to enjoy more functions such as subtitles, exclusive images
and online games by connecting this unit to the Internet.
1 Connect to the network. (> 12)
2 Insert an SD card (with 1 GB or more free space).
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
SD card is used as the local storage (> 45).
3 Insert the disc.
Playing picture-in-picture
∫ Deleting data/Formatting SD cards
To turn on/off secondary video
Press [PIP].
1
2
3
4
Insert an SD card.
Press [FUNCTION MENU].
Press [3, 4] to select “Other Functions” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
Secondary video
5
Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
Card Management
No. of Files
6
SD card
Free space 300 MB
BD-Video Data Erase
Format SD Card
Primary video
To turn on/off secondary audio
OK
Format this SD Card.
[DISPLAY] > select “Disc” > [1] > select
“Signal Type” > [OK] > set “Soundtrack” in
“Secondary Video” to “On” or “Off”
RETURN
6
7
Press [2, 1] to select “Yes” and press [OK].
Press [2, 1] to select “Start” and press [OK].
≥ To use the above functions, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(> 30).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 31).
21
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Displaying subtitle text
Regarding DivX
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an
official DivX Certified device that plays DivX video. Visit
convert your files into DivX video.
You can display subtitle text on the DivX video disc with this
unit. This function has no relation to the subtitles specified in
DivX standard specifications and has no clear standard. The
operation might be different or it may not operate properly
depending on the way the file was made or the state of this
unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (> 28)
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD
section in the device setup menu.
≥ DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language
settings. (> 30)
Go to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
≥ It is not possible to playback DivX VOD content recorded on
the USB device.
Display the unit’s registration code.
(> 33, “DivX Registration” in “Others”)
DivX Registration
The registration code is necessary to
register this unit to play protected
DivX videos.
10 alphanumeric
Registration Code: XXXXXXXXXX
characters
≥ After playing DivX VOD content for the first time, the
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration code
different from this unit’s code, you will not be able to play
this content. (“Authorization Error” is displayed.)
Cancel the unit’s registration.
(> 33, “DivX Registration” in “Others”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
Regarding DivX VOD content that can only be played a
set number of times
Some DivX VOD contents can only be played a set number of
times. When you play this content, the number of times
already played and initially playable number of times is
displayed.
≥ The remaining number of plays decreases each time a
program is played. However, when playing from the point
where play was previously stopped, the remaining number
of plays does not decrease due to the resume play function.
22
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D video
BD
≥ Please refrain from viewing 3D images if you do not feel well or are to
view 3D images safely and comfortably.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ 3D images may not output as settings of “HDMI Resolution“ and “24p
Output“. (> 32)
You can enjoy powerful videos with realistic sensations of the
3D compatible video software by connecting this unit with an
HDMI cable to a 3D compatible TV.
Preparation
Connect 3D compatible TV to an HDMI MAIN AV OUT
terminal of this unit using an HDMI cable. (> 8, 10)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 19)
3D settings
Perform the following settings as necessary.
You can play back 3D videos as 2D
(normal) videos. (> 30)
Playback Method
for 3D Disc
If you cannot playback in 3D, change
the settings as required by the
connected TV format. (> 32)
≥ Change the settings for 3D on the TV
also when “Checker board” and “Side
by side” are selected.
3D Type
If the amplifier/receiver is connected to
the HDMI SUB AV OUT terminal (> 10),
set to “V.OFF”. (> 32)
≥ HDMI (SUB) V.OFF LED on this unit
will light. (> 31)
HDMI(SUB)
Output Mode
Hide the 3D viewing warning screen.
(> 30)
3D Playback
Precautions
Adjust the pop-up position for the
Playback menu or message screen etc.
(> 29)
Pop-Out Level
23
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures
Useful functions
BD DVD CD SD USB
1 Press [SUB MENU].
2 Select an item, then press [OK].
While “Album View” or “Picture View” screen is displayed
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,
USB device)
1 Insert a disc, SD card or USB device.
Start
Slideshow
You can display still pictures one by one at a
constant interval.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
Display Interval
Change the display interval.
Transition Effect
Set display method.
2 BD-RE, DVD-RAM
Press [3, 4, 2, 1] to select the album
Repeat Play
Repeat slideshow.
Soundtrack
and press [OK].
Album View
DIRECT NAVIGATOR
DVD-RAM(VR)
Picture
Video
The MP3 that is recorded on the USB device
or the music CD can be played back as
Background Music during the slideshow.
Soundtrack Folder
Slideshow
Settings
106_DVD
Total 8
2006
Total 13
9
12
A folder to play back can be selected when a
USB device with recorded MP3 is connected
to this unit.
Previous
Next
Slideshow Page 02/02
Y
R
Video
G
Picture
B
OK
SUB
MENU
RETURN
Press [OK] to go to Picture View.
Press [3, 4, 2, 1] to select “Set” and
press [OK].
To switch to another higher folder.
≥ Only if there is a multiple number of higher
folders recognizable.
3 Press [3, 4, 2, 1] to select the still
Select Root
folder
picture and press [OK].
Select
Folder
DIRECT NAVIGATOR
DVD-RAM(VR)
Picture View
To select the still pictures in another folder.
Playing video contents (> 19).
To display album view.
Picture
Video
2006
9
12
0001
0005
0009
0004
To Video
To album
view
While playing (except for slideshow)
Page 001/001
Play
SUB
Rotate Right
MENU
RETURN
Rotate the still picture.
Rotate Left
Press [2, 1] to display the previous or next still picture.
Reduce the still picture.
Zoom out
Zoom in
≥ This function is only available for
small-sized still pictures.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
Cancel “Zoom out”.
∫ To show the picture properties
≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When both the music CD and the USB device with recorded MP3 is
inserted into this unit, the music CD has priority to be played back as
Background Music.
While playing, press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date
Photo 11/12/2007
Total
3/9
To exit the screen
Press [STATUS].
24
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying VIERA CASTTM
Playing music
DVD CD USB
You can access a selection of Internet services from the
Home screen with VIERA CAST, for example YouTube,
Picasa Web Albums. (Current as of December 2009)
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
Preparation
≥ Network connection (> 12)
≥ Network setting (> 15)
1 Insert a disc or USB device.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
1 Press [VIERA CAST].
2 Press [3, 4] to select the track and press
Message is displayed. Please read these instructions
carefully and then press [OK].
[OK].
0.09
4.30
DIRECT NAVIGATOR
CD
Music list
2 Press [3, 4, 2, 1] to select the item and
Track1
5 Tracks / Total Play Time 20min54sec
press [OK].
No.
Track Name Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
01
02
03
04
05
Track1
Track2
Track3
Track4
Track5
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], colored buttons, number
buttons
VIERA CAST Home screen;
New York, NY
Weather
Play
RETURN
COMING SOON
Settings
W
17
mph
28°
“
” indicates the track currently playing.
Featured Photos
Featured Videos
COMING
SOON
Top Movie Rental
Bloomberg
15min. delay
TELEVISION
XXXXXX
Top TV Show
XXXXXX
XXX
XXX
XXX
7465.95
778.94 -9.47998
1442.82 -25.15
-89.68
∫ Playing a track in another folder
Images are for illustration purposes, contents may
change without notice.
1
While the “Music list” is displayed
Press [SUB MENU].
2 Press [3, 4] to select “Select Folder” and
To return to VIERA CAST Home screen
Press [VIERA CAST].
press [OK].
To exit from VIERA CAST
Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT
NAVIGATOR].
≥ You cannot select folders that contain no compatible tracks.
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 33)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
≥ Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use the VIERA CASTTM function. (> 17)
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
25
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
DLNA feature
[BDT350]
≥ Discs or music cannot be played back. Also, depending on the equipment,
playback of pictures may not be possible.
≥ Items displayed in gray on the display cannot be played back by this unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.
You can enjoy viewing video and pictures saved on a DLNA
Certified media server (such as a PC with Windows 7 installed
etc.) connected to the home network with this unit.
≥For the operation of equipment connected to the network,
refer to their respective operating instructions.
Preparation
Useful functions for when
playing back pictures
The following operations are possible when playing back
pictures from connected equipment.
1
Perform network connection (> 12) and network setting
(> 15).
2
Connect a DLNA Certified media server to the network.
While contents list is displayed
Viewing of video and pictures
on the equipment connected to
this unit via the network
1
2
Press [SUB MENU].
Select an item, then press [OK].
Start
Slideshow
You can display still pictures one by one at a
constant interval.
Display Interval
Change the display interval.
Repeat Play
Repeat slideshow.
1 Press [FUNCTION MENU].
Slideshow
Settings
2 Press [3, 4] to select “Network” and
press [OK].
Press [3, 4, 2, 1] to select “Set” and
3 Press [3, 4] to select “Home Network
press [OK].
(DLNA)” and press [OK].
≥ A list of equipment connected via the network is
displayed.
While playing
≥ This list can be updated by pressing [R] on the remote
control.
1
2
Press [SUB MENU].
Select an item, then press [OK].
e.g.
Status
Show the picture properties (> 24).
Rotate Right
(except for
slideshow)
Home Network (DLNA)
XXXXXX
Rotate the still picture.
Rotate Left
(except for
slideshow)
OK
Servers found on the network are displayed.
Please select one.
RETURN
Update
4 Press [3, 4] to select the equipment to
playback the contents, and press [OK].
5 Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ Menu structure will be different depending on the
equipment connected to this unit. Select the contents by
repeating the operation.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [3, 4, 2, 1], [OK]
and [EXIT].
Control Panel
e.g.
Exit
≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.
26
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with
the TV
Easy control only with VIERA
remote control
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
(VIERA LinkTM “HDAVI ControlTM”)
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM
.
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable*. See the operating
instructions for connected equipment for operational
details.
1 Press [SUB MENU].
Control Panel
Screen Aspect
Top Menu
2 Select an item, then
press [OK].
Pop-up Menu
OK
SUB
MENU
* Only when connecting via an HDMI MAIN AV OUT terminal
on this unit.
RETURN
≥ The sub menu may not appear
while the Top Menu for BD-Video or DVD-Video is
displayed.
Preparation
1
2
3
Set “VIERA Link” to “On” (> 32). (The default setting is
“On”.)
Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
Automatic input switching
Power on link
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off, the television
will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off power
to the television
When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later and an amplifier/receiver
supports VIERA Link.
1
While playing music
Press [SUB MENU].
2
Press [3, 4] to select “TV Power” and press [OK].
27
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Playback menu
Disc
Signal Type
1 Press [DISPLAY].
e.g., BD-Video
Primary Video
The recording method of original video
appears.
Disc
Video
Signal Type
Play
Off
Main
1ENG
Subtitle
Soundtrack Select the type of audio or language.
Video
Audio
-
-
Subtitle Style
Angle
Settings
Secondary Video
Menus
Items
Select on/off of images. The recording
Video
method of original video appears.
2 Press [3, 4] to select the menu and press
Soundtrack Select on/off of audio and the language.
[1].
3 Press [3, 4, 2, 1] to select the item and
Video
press [1].
The recording method of original video appears.
4 Press [3, 4] to select the setting.
Soundtrack
Show or change the soundtrack.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Regarding Language, Audio attribute and video attribute :
(> 42)
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(>19, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu.
(> 19)
28
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
Play
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
display.)
≥ When the content is distorted change the settings from
“Auto“ to “Video”.
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
24p
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
Select “Off” to cancel.
≥ Only when you have selected “On” in “24p Output” (> 32).
Random
Select whether or not to play random.
Playback Information Window
Displays the following.
Audio
Sound Effects*1, *2
Select the sound effect.
≥ Digital Tube Sound :
This feature gives you warm sound, like that produced by a
vacuum tube amplifier.
Audio/video attribute information of disc.
Settings status of “Digital Audio Output” (> 31).
HDMI output information.
*&/+
(First: HDMI(MAIN), Second: HDMI(SUB))
≥ Re-master :
This feature gives you brighter sound by increasing the high
frequency portion of the audio. (Discs recorded at 48 kHz or
less)
Press [RETURN] to exit.
Pop-Out Level
Recommended setting
(Only when “Full HD” is selected in “3D Type” (> 32).)
Pop-up position for the Playback menu or message screen
etc. can be adjusted.
Re-master 1
Re-master 2
Pop and rock
Jazz
Re-master 3
Classical
≥ Night Surround :
Enjoy a movie with powerful sound even when the volume is
kept low at night. The audio is set in such a way that it can
be heard easily.
Video
Picture
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [1] to select “Picture Adjustment” and press [OK].
Dialog Enhancer*2
The volume of the center channel is raised to make dialog
easier to hear.
≥ 3D NR:
Reduces the rough noise in the background to give a greater feeling of
depth.
High Clarity Sound
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” (> 31).
When “24p Output” is set to “On”, this function may not operate. (> 32)
≥ Integrated NR:
Smoothes block noise and reduces the smudging that appears around
contrasting sections of the picture.
*1
Advanced Settings
Not every function can be set individually.
This function is effective for audio from the HDMI terminal or the
*2
COAXIAL /OPTICAL terminal only when “Digital Audio Output” is set to
“PCM” (> 31). (However, in this case, audio is output as 2ch from the
COAXIAL /OPTICAL terminal.)
Chroma Process
The high-resolution processing of HDMI chroma signals
produces a high-resolution picture with rich picture quality.
Detail Clarity
The picture is sharp and detailed.
Super Resolution
Pictures of normal image quality are corrected to sharp and
detailed images when output as 1080i/1080p from HDMI AV
OUT or COMPONENT VIDEO OUT.
29
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Method for 3D Disc
Select the playback method of 3D compatible video software.
Setup menu
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
3D Playback Precautions
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.
1
While stopped
Press [SETUP].
Audio Language
Choose the language for audio.
Setup
≥ If “Original” is selected, the original language of each disc
will be selected.
Disc
Video
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.
Audio
Display
TV / Device Connection
Network
Subtitle Language
Choose the language for the subtitle.
Others
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that language
will automatically appear if available on that disc.
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.
OK
RETURN
2 Press [3, 4] to select the menu and press
[OK].
Menu Language
3 Press [3, 4] to select the item and press
Choose the language for the disc menus.
≥ Enter a code (> 42) with the number buttons when you
select “Other ¢¢¢¢”.
[OK].
If there are any other items, repeat these steps.
BD-Live Internet Access (> 21)
You can restrict Internet access when BD-Live functions are
used.
4 Press [3, 4, 2, 1] to select the option
and press [OK].
≥ If “Allow (Limited)” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
To exit the screen
Press [SETUP].
≥ There may be differences in operation methods. If this happens, follow the
on-screen instructions for the operation.
DivX Subtitle Text
Select a suitable item according to the language used for DivX
subtitles text (> 22).
≥ This item is displayed only after playing back a file.
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 33)
Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto Automatically selects the type of picture shown.
Field Select if jittering occurs when “Auto” is selected.
Disc
DVD-Video Ratings
Select if small text or fine patterns cannot be seen
clearly when “Auto” is selected.
Frame
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the number buttons when the password screen is
shown.
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the number buttons when the password screen is
shown.
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
30
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
High Clarity Sound
When connected to TV via the HDMI terminal for outputting
image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 29)
Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
Digital Audio Output (> 38)
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output
.
Display
Status Messages
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format.
≥ Not making the proper settings may result in noise.
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 21)
≥ If “Off” is selected, the unit outputs the primary audio only.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are converted to 48 kHz
are output.
≥ If “Off” is selected, and the connected equipment does not
support 96 kHz, the sound will not be output normally.
≥ Signals are converted to 48 kHz despite the settings in the
following cases:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to FUNCTIONS screen
automatically.
≥ While playing and pausing, etc., this function is not
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
FL Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback
and bright not during playback.
Downmix
Select the downmix system of multi-channel to 2 channel
sound.
SD Card LED Control
≥ Select “Surround encoded”, when the connected equipment
supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT.
Set the lighting method for the SD card LED.
≥ If “SD inserted” is selected, and this unit is turned on and
SD card is inserted, the lamp is lighted.
≥ The audio will be output in “Stereo” in the following cases;
– AVCHD playback
– Playback of secondary audio (including the button click
sound).
HDMI(SUB) V.OFF LED Control
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output Mode” (> 32) is set
to “V.OFF”, and the power of the connected equipment to
the HDMI SUB AV OUT is on.
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded
and played back at 7.1ch.
License
Information about the software used by this unit is displayed.
≥ If “Off” is selected, sound is played over the original number
of channels. (Note that in the case of 6.1ch audio, playback
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
31
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
24p Output
TV / Device Connection
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Checker
board” and “Side by side” are selected.
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set
“24p” in “Video” (> 29) to “On”.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
TV Aspect
Set to match the type of television connected.
HDMI Color Mode
This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
cable.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
The sides are cut off so
the picture fills the screen.
HDMI Audio Output
4:3 Pan &
When playing BD-Video,
Scan
This setting selects whether or not to output audio from
HDMI.
video is output as “4:3
Letterbox”.
≥ Select “Off” when the TV is connected to this unit via an
HDMI terminal, and this unit is also connected to other
devices, such as an amplifier/receiver via a COAXIAL or
an OPTICAL terminal.
Black bands appear at the
top and bottom of the
picture.
4:3 Letterbox
VIERA Link
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Video is displayed as a 4:3 ratio image in the
16:9
center of the screen.
Deep Color Output
Video is displayed as a horizontally
16:9 Full
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
stretched 16:9 image.
HDMI Connection
Press [OK] to show the following settings:
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT
terminal.
Component Video Resolution
This sets the video output resolution when connected via the
Images are output from the HDMI terminal in the
resolution set in “HDMI Resolution”.
On
COMPONENT VIDEO OUT terminal.
Images are output in the resolution set in
“Component Video Resolution”.
Off
≥
Even if you select “720p” or “1080i”, the video output
resolution is restricted to “480p” when images of DVD-Video
discs are output from the COMPONENT VIDEO OUT
terminals.
HDMI(SUB) Output Mode
Set to output the video from the HDMI SUB AV OUT
terminal or not.
Analog Audio Output
You can set the optimum multi-channel surround sound
for your speakers from this unit when the settings cannot be
adjusted from a connected amplifier/receiver with AUDIO
OUT terminals.
HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK],
and then set the following options.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p, you
need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected
to an HDTV through other equipment, it must also be
1080p compatible.
L
R
– Speaker presence and size (
)
C
SW
LS
RS LB RB
ms
0.0
– Delay time (
)
dB
0.0
– Channel balance (
)
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
32
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
MAC Address
Displays the MAC address of this unit.
Network
Network Easy Setting (> 15)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Others
Off Timer
Select how long the unit remains on when it is not being used.
LAN Connection Mode
Select connection method.
Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so
contents of the following will be different from the time it is
set to “Off”.
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
– Idle power consumption will increase. (about the power
consumption > 43)
– The cooling fan may turn slowly to prevent overheating of
internal parts.
Double Speed Mode Setting (2.4GHz) [BDT350]
When a 2.4 GHz wireless format is used, this setting sets
the connection speed.
≥ If you connect using the “Double Speed Mode(40MHz)”,
2 channels use the same frequency band, and there is
consequently a greater risk of reception interference.
This can cause the connection speed to drop or the
connection to become unstable.
Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output”, “Quick Start”)
Restore Default Settings
IP Address/DNS Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” to the default settings.
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
DivX Registration (> 22)
You need this registration code to purchase and play DivX
Proxy Server Settings
This is for checking the state of connection with the Proxy
Video-on-Demand (VOD) content.
server and performing settings.
Press [OK] to show the respective setting.
System Information
Display firmware version of this unit, wireless LAN module of
your Wireless LAN Adaptor.
Internet Content Settings (> 25) (VIERA CAST)
Press [OK] to show the following settings:
Firmware Update (> 17)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VIERA CAST.
Update Now
You can update the firmware manually.
≥
Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
33
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting guide
General operation
Before requesting service, please perform the
following steps.
To return to the factory preset.
¾
Select “Yes” in “Restore Default Settings” in the Setup
menu. (> 33)
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
To return all settings to the factory preset.
irregularities that are discovered with certain movies.
¾
1
Reset the unit as follows:
(> 17)
While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “08 FIN” is displayed on the
unit's display.
4
Make the following checks and visit our
website for more information.
For USA :
Enter the model number.
For Canada :
4
2
3
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Even so, you still have trouble,
Power of this unit is turned off when the input
for the TV is switched.
Visit our website to find a service center.
You can find a service center near you easily on our
website.
¾
This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” (> 46) or “Limited Warranty (Only for
CANADA)” (> 47).
The remote control doesn’t work properly.
¾
The remote control and main unit are using different
codes. Change the code on the remote control. (> 33)
It may be necessary to set the manufacturer code or the
remote control code again after changing the batteries for
the remote control. (> 17)
The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.
¾
The TV tuner mode is not displayed when the
TV is switched on.
∫ Unit doesn’t respond to remote control
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.
¾
This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
∫ Cannot eject disc.
¾
1
The ratings level returns to the factory preset.
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
The unit may have a problem.
1
While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “03 VL” is displayed on the
unit's display.
Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.
– “00 RET” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “06 FTO” is displayed on
the unit's display.
Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.
2
3
2
3
34
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
Picture
The images from this unit do not appear on
the television.
Picture is distorted.
¾
¾
Confirm the “TV Aspect” is set properly. (> 32)
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 20) on the unit is
also possible)
¾
An incorrect resolution is selected in “Component Video
Resolution” or “HDMI Resolution”. Reset the setting as
follows:
1
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
Audio
Cannot switch audio.
– “00 RET” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is displayed on
the unit's display.
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 32)
2
3
¾
When connecting an amplifier/receiver using a COAXIAL/
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM” or
connect using AUDIO OUT terminal. (> 11, 31)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. (> 33)
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings. (> 31)
Video is not output.
¾
When the unit is connected to an amplifier/receiver with
the AUDIO OUT terminal, set “Analog Audio Output”.
(> 32)
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (> 32)
When connecting this unit to a TV via an HDMI MAIN AV
OUT and to an amplifier/receiver via an HDMI SUB AV
OUT, set “HDMI(SUB) Output Mode” to “V.OFF”. (> 10)
¾
Set the “High Clarity Sound” in the Playback menu to “Off”
to use the COMPONENT VIDEO OUT terminal or the
VIDEO OUT terminal. (> 29)
¾
¾
¾
Video from the HDMI SUB AV OUT terminal is not output
when the “HDMI(SUB) Output Mode” is set to “V.OFF”.
(> 32)
Video is not output in high-definition.
¾
Confirm that the “HDMI Video Mode”, “HDMI Resolution”,
and “Component Video Resolution” in the Setup menu are
set properly. (> 32)
3D video is not output.
¾
Is there a non-3D compatible amplifier/receiver connected
between this unit and a TV? (> 10)
¾
If there is a non-3D compatible amplifier/receiver
connected to the HDMI SUB AV OUT terminal, set the
“HDMI(SUB) Output Mode” to “V.OFF”. (> 10)
Are the settings on this unit and the TV correct? (> 23)
Is the amplifier/receiver connected to between this unit
and TV on?
¾
¾
No subtitles.
¾
When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or turn off the closed caption setting
on the TV. (> 28)
35
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Network
Disc cannot be played.
I can’t connect to the network.
¾
The disc is dirty. (> 4)
¾
¾
Confirm the network connection and settings. (> 12, 33)
Check the operating instructions for each device and
connect accordingly.
The contents of the USB device cannot be
read.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback. [BDT350]
¾
USB devices connected using a USB extension cable
other than the one included or a USB hub may not be
recognized by this unit.
If inserted during playback the USB device may not be
recognized by this unit.
If two USB devices other than Wireless LAN adaptor are
connected simultaneously, they will not be recognized by
this unit.
¾
¾
¾
Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the
problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless
router (Access Point), it is necessary to set the encryption
type to “AES”.
Still pictures (JPEG) do not play back
normally.
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
¾
The images that were edited on the PC, such as
¾
On the “Access Point Connection Setting” screen (> 33),
the continuous lighting of at least 4 “Reception” indicators
is the target for a stable connection. If 3 or fewer
indicators are lit or the connection is being interrupted,
change the position or angle of your Wireless router
(Access point) and see if the connection state improves. If
there is no improvement, connect to a wired network and
perform the “Network Easy Setting” (> 15) again.
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live.
¾
¾
The SD card is write-protected. (> 7)
Confirm that this unit is connected to the broadband
Internet. (> 12)
¾
¾
Confirm the “BD-Live Internet Access” settings. (> 30)
Confirm an SD Card is inserted into the SD Card slot.
(> 18)
36
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
No READ
Messages
¾
The media is dirty or badly scratched. The unit cannot
play.
The following messages or service numbers appear on the
television or unit’s display when something unusual is
detected during startup and use.
PLEASE WAIT
¾
The unit is carrying out an internal process. This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
On the television
REMOVE
Cannot play.
¾
The USB device is drawing too much power. Remove the
USB device.
¾
You inserted an incompatible disc (Discs recorded in PAL
video, etc.).
Cannot display on this unit.
SET
¾
¾
You tried to play a non-compatible image.
Confirm “SD” on the unit’s display is not blinking and
re-insert the card.
(“ ” stands for a number.)
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the
indicated number button at the
same time for more than 5
seconds.
No disc is inserted.
¾
The disc may be upside down.
$ This operation is not available.
¾
Some operations are unsupported by the unit. For
example;
U59
¾
The unit is hot.
– BD-Video: During playback, reverse slow-motion or reverse
frame-by-frame is not possible.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the cooling fan on the rear of the unit.
IP address is not set.
¾
The “IP Address” in “IP Address/DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address acquisition if
necessary.)
U72
U73
¾
The HDMI connection acts unusually.
– Turn the unit and TV off.
– Disconnect the HDMI cable between the player and the
TV.
The current security setting of Wireless LAN
is low. It is recommended to change the
setting. [BDT350]
¾
Authentication type for the Wireless LAN is set to “Open
system”, or the encryption type is set to “No encryption”. It
is recommended to encrypt for safety reasons. For
details, refer to the instructions of the Wireless router
being used. Encryption is required when playing back
video, etc., from DLNA compatible devices.
H or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
1
2
Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
On the unit’s display
F99
START
¾
The unit fails to operate properly. Press [POWER Í/I] on
¾
The system is being restarted during the firmware update.
Please do not turn off power.
the main unit to switch the unit to standby for 3 seconds.
Now press [POWER Í/I] on the main unit again to turn
the unit on.
UPD/
(“ ” stands for a number.)
HDMI ONLY
¾
The firmware is being updated.
Please do not turn off power.
¾
Some BD-Video discs can only be output with HDMI.
NET
FINISH
¾
Displays while VIERA CAST is starting up.
¾
The firmware update is complete.
No PLAY
¾
There is a viewing restriction on a BD-Video or
DVD-Video. (> 30)
37
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Information
About audio from audio output terminals
The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 31,
Digital Audio Output)
≥ The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial/Optical)
Terminal
HDMI AV OUT
DIGITAL AUDIO OUT
“Dolby D/Dolby D +/Dolby
TrueHD”/“DTS/DTS-HD”
“Bitstream”*1
“PCM”*2
“Bitstream”
“On”/“Off”
“PCM”
“On”*3
“On”*4
“BD-Video Secondary Audio”
“Off”
“Off”
“On”/“Off”
DVD-Video : 5.1ch PCM
BD-Video : 7.1ch PCM*7
Dolby Digital/
Dolby Digital
EX*6
Dolby Digital/
Dolby Digital EX*5
Dolby Digital
Dolby Digital Plus/
Dolby TrueHD
7.1ch PCM
Dolby Digital
Outputs using
original audio
Down-mixed
2ch PCM
DVD-Video : 5.1ch PCM
BD-Video : 7.1ch PCM*8
DTS Digital
Surround/
DTS-ES*6
DTS Digital Surround/
DTS-ES*5
DTS Digital
Surround
DTS-HD High Resolution
Audio/
DTS-HD Master Audio
DTS Digital
Surround
7.1ch PCM*8
7.1ch LPCM
7.1ch PCM
Down-mixed 2ch PCM
AUDIO OUT
5.1ch AUDIO
2ch AUDIO
OUT
Terminal
7.1ch AUDIO OUT
OUT
“BD-Video Secondary Audio”
“On”*4/“Off”
“On”/“Off”
“On”/“Off”
DVD-Video : 5.1ch
BD-Video : 7.1ch*7
Dolby Digital/
Dolby Digital EX
Dolby Digital Plus/
Dolby TrueHD
7.1ch
DVD-Video : 5.1ch
BD-Video : 7.1ch*8
DTS Digital Surround/
DTS-ES
5.1ch
2ch
DTS-HD High Resolution
Audio/
DTS-HD Master Audio
7.1ch*8
7.1ch
7.1ch LPCM
*1
When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or
down-mixed 2ch PCM (e.g., TV).
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to
“Off”.
When playing BD-Video with secondary audio or button click sound, the audio is output as 5.1ch.
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS
Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if
playing BD-Video without secondary audio or button click sound, the audio is output as the original format.
When BD-Video is played and “7.1ch Audio Reformatting” is set to “Off”, the audio is output as 5.1ch.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.
*2
*3
*4
*5
*6
*7
*8
38
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] > “Audio” > Set each item
For details of the each item, refer to page 31.
Example of connected equipment
Receiver with
HD audio*2
decoder via
HDMI
Receiverwithout
HD audio*2
decoder via
HDMI
Receiver via
COAXIAL or
OPTICAL
Receiver
via analog output*3
TV via HDMI*1
Setup menu
“Dolby D/Dolby
D +/Dolby
TrueHD”
“PCM”
“PCM”
“Off”
“Bitstream”
“Bitstream”
“Off”
“PCM”
“PCM”
“Off”
“PCM”
“PCM”
“Off”
No effect
No effect
“Off”
“Digital
Audio
Output”
“DTS/DTS-HD”
“BD-Video
Secondary
Audio”
“PCM Down Conversion”
“Downmix”
No effect
“Stereo”
“Enable”
No effect
No effect
“Disable”*6
No effect
No effect
“Disable”*6
“Off”*4
No effect
No effect
“Disable”*6
“Stereo”*5
“Disable”*6
“High Clarity Sound”
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [SETUP] > TV / Device Connection)
If the connected equipment that does not support 96 kHz, set to “On”.
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
When connected to TV via the HDMI terminal for outputting image, set to “Enable”.
*2
*3
*4
*5
*6
39
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3/JPEG/DivX/
AVCHD/MPEG2 files
Subtitles text file of DivX
Subtitles text file of DivX
File format
MicroDVD, SubRip, or TMPlayer
Files must have the extension “.SRT”,
“.srt”, “.SUB”, “.sub”, “.TXT” or “.txt”.
MP3
Extension
File format
MP3
≥ The DivX video file and subtitles text file
are inside the same folder, and the file
names are the same except for the file
extensions.
≥ Depending on the methods used to
create the file or the state of the
recording, only parts of the subtitles may
be displayed, or the subtitles may not be
displayed at all.
Files must have the extension “.mp3” or
“.MP3”.
Extension
Compression
rate
Reference
32 kbps to 320 kbps
Sampling rate 44.1 kHz/48 kHz
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
Reference
AVCHD
JPEG
AVCHD format (V1.0) used on High
Definition Video Camera
File format
JPEG
File format
(Panasonic and some others)
Files must have the extension “.jpg” or
“.JPG”.
Extension
Codec
MPEG-4 AVC/H.264
Picture
resolution
between 34k34 and 8192k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
≥ Discs must conform to UDF 2.5.
JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is
not supported
Reference
MPEG2
SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some others)
* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
File format
Codec
MPEG2
≥ BD-RE must conform to UDF 2.5.
* SD-Video Entertainment Video Profile
DivX
≥ With certain recording states and folder structures, the play order may
differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
File format
DivX
Files must have the extension “.DIVX”,
“.divx”, “.AVI” or “.avi”.
Extension
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
Picture
resolution
Up to 1920k1080 pixels
This unit is not compatible with packet writing.
≥ DivX certified to play DivX video up to HD
1080p, including premium content.
Video
– Number of streams: Up to 1
– Codec: DIV3, DIV4, DIVX, DX50, DIV6
– FPS (Frame Per Second): Up to 60 fps
Audio
Reference
– Number of streams: Up to 8
– Format: MP3, MPEG, Dolby Digital
– Multi channel: Dolby Digital is possible.
MPEG multi is 2 ch conversion.
≥ GMC (Global Motion Compensation) is
not supported.
≥ DVD-R and DVD-R DL must conform to UDF 1.02 without
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.
40
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Structure of MP3 folders
Structure of folders that can be
played in this unit
in DVD-R/DVD-R DL/CD-R/CD-RW/USB device
Prefix the file names with 3-digit numbers in the order you
want to play them.
You can play files on this unit by structure of folders as
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.
e.g.,
Root
001XXXX.mp3
002XXXX.mp3
Folder A
003XXXX.mp3
004XXXX.mp3
005XXXX.mp3
Folder which can be displayed with this unit
¢¢¢: Numbers
Folder B
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3
XXX: Letters
*1
¢¢¢: from 001 to 999
¢¢¢: from 100 to 999
*2
Folder C
XXXXX: 5 figures
¢¢¢¢: from 0001 to 9999
*3
010XXXX.mp3
011XXXX.mp3
012XXXX.mp3
XXXX: 4 figures
Structure of DivX folders
Structures of still picture (JPEG) folders
in BD-R*7/DVD-R*7/DVD-R DL*7/CD-R*7/CD-RW*7/USB
device*7
Files inside a folder are displayed in the order they were
updated or taken.
in DVD-R*4/DVD-R DL*4/CD-R*5/CD-RW*5
Files inside a folder are displayed in the order they were
updated or taken.
Root
e.g.,
e.g.,
Root
P0000001.jpg
P0000002.jpg
P0000001.divx
P0000002.divx
Folder A
Folder A
P0000003.jpg
P0000004.jpg
P0000003.divx
P0000004.divx
P0000005.divx
P0000005.jpg
Folder B
Folder B
P0000006.jpg
P0000007.jpg
P0000006.divx
P0000007.divx
P0000008.divx
P0000009.divx
P0000008.jpg
FolderPC0000009.jpg
Folder C
P0000010.divx
P0000011.divx
P0000012.divx
P0000010.jpg
P0000011.jpg
P0000012.jpg
in BD-RE*6/DVD-RAM*4
≥ Folder structure is not displayed.
*4
*5
*6
*7
The total combined maximum number of recognizable picture contents
and folders: 3000 picture contents and 300 folders.
The total combined maximum number of recognizable picture contents
and folders: 999 picture contents and 99 folders.
The total combined maximum number of recognizable picture contents
and folders: 9999 picture contents and 300 folders.
The total combined maximum number of recognizable file contents and
folders: 200 file contents and 300 folders.
Root
e.g.,
P0000001.jpg
P0000002.jpg
JPEG
*1
DCIM
*2
*3
XXXXX
XXXX.jpg
DCIM
*2
XXXXX
*3
XXXX.jpg
in SD card*4/USB device*4
Displays JPEG files in all folders.
≥ Folder structure is not displayed.
e.g.,
Root
P0000001.jpg
P0000002.jpg
DCIM
*2
XXXXX
XXXX.jpg
*3
Folder A
P0000003.jpg
P0000004.jpg
41
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplemental information
∫ TV/Amplifier/Receiver code list
∫ Display languages list
Brand
TV Code
Display Language Display Language Display Language
Panasonic
FUNAI
0051 / 0055 / 0250 / 0650
0180 / 0171 / 0179
0016 / 0032 / 0038 / 0056 / 0095 / 0097 / 0145 / 0151 / 0173 / 0227 / 0279 / 0409 / 0413 /
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
HITACHI
1145
INSIGNIA
JVC
LG
MITSUBISHI
PHILIPS
PIONEER
POLAROID
1564 / 0171 / 1204 / 1326 / 1517 / 1660 / 2002 / 2003/ 2004
0036 / 0053 / 0069 / 0160 / 0169 / 0182 / 0731 / 1253
0019 / 0030 / 0032 / 0106 / 0178 / 0317 / 0409 / 0442 / 0457 / 0700 / 0856 / 1178 / 1265
0014 / 0019 / 0093 / 0098 / 0150 / 0155 / 0178 / 0331 / 0358 / 0836 / 0868 / 1250
0054 / 0690 / 1154 / 1454
0038 / 0166 / 0172 / 0679 / 0866
0765 / 0865 / 1262 / 1276 / 1314 / 1316 / 1326 / 1327 / 1328 / 1341 / 1498 / 1523 / 2002
Turkish
Others
Portuguese
Russian
0019 / 0030 / 0032 / 0056 / 0060 / 0178 / 0329 / 0408 / 0427 / 0587 / 0702 / 0766 / 0812 /
0814 / 1060
SAMSUNG
SANYO
SHARP
SONY
0088 / 0107 / 0146 / 0154 / 0159 / 0232 / 0484 / 0799 / 0893
0039 / 0093 / 0153 / 0157 / 0165 / 0220 / 0281 / 0386 / 0398 / 0491 / 0688 / 0818 / 0851
0000 / 0011 / 0080 / 0111 / 0273 / 0353 / 0810 / 0834 / 0867 /1100
0036 / 0060 / 0149 / 0154 / 0156 / 0650 / 0832 / 0845 / 1156 / 1164 / 1256 / 1265 / 1356 /
1656 / 1704
1758 / 0864 / 0885 / 1756
∫ Language code list
TOSHIBA
VIZIO
Language Code Language Code Language Code
Abkhazian
Afar:
Afrikaans:
Albanian:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
WESTINGHOUSE 0885 / 0889 / 0890 / 1282 / 1577
7265
8277
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8279
8285
8377
8365
Amplifier
Brand
Receiver Code
Code
Amharic
Arabic:
Armenian:
Assamese:
Aymara:
:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian:
6583 Interlingua:
6589 Irish:
Panasonic
COBY
DENON
EMERSON
HARMAN / KARDON
INSIGNIA
JVC
LG
MARANTZ
ONKYO
PHILIPS
PIONEER
0308
1308 / 0039 / 0367 / 1641 / 2001 / 2002
1513 / 2003
7378 Scots Gaelic: 7168
7365 Serbian:
8382
7165 Serbo-Croatian: 8372
1360 / 0004 / 0273 / 1142 / 1311
1340 / 2005
0110 / 0189 / 1306
1030 / 1077 / 1751 / 2004
0074 / 1374 / 1495 / 1855 / 1871
1293 / 2006
1189 / 1269 / 0039 / 0189 / 1289
0135 / 0380 / 1298 / 1320
1189 / 1269 / 0189 / 0391 / 1120 / 1266 / 1368
Azerbaijani:
Bashkir:
Basque:
6590 Italian:
7384 Shona:
7465 Sindhi:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
6665 Japanese:
6985 Javanese:
Kannada:
7487 Singhalese:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
7579 Sundanese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
Bengali; Bangla:
6678 Kashmiri:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
0823
0823
1023 / 0150 / 0244 / 0531 / 0630 / 1343 / 1384
1023 / 1609 / 1254 / 0054 / 0530 / 0531 / 1074 / 1390 / 1511
1295
RCA
SAMSUNG
SONY
YAMAHA
1622 / 0158 / 0168 / 0474 / 1367 / 1529 / 1658 / 1758
0176 / 0186 / 1331
0815 / 1126
0354
Byelorussian: 6669 Latin:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
7577 Latvian, Lettish: 7686 Tajik:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian:
7282 Malagasy:
6783 Malay:
7678 Tamil:
7684 Tatar:
7775 Telugu:
7771 Thai:
7783 Tibetan:
7776 Tigrinya:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
∫ Video attribute
Danish:
Dutch:
6865 Malayalam:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
Display
Meaning
MPEG-2/MPEG-4 AVC/VC-1
480/576/720/1080
Video recording method
Video Format
English:
Esperanto:
Estonian:
Faroese:
Fiji:
24p/50i/60i/50p/60p
Video Frame rate
Color Space
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
YCbCr4:2:2/YCbCr4:4:4/RGB
bps (bit per second)
Transfer rate of bit
Finnish:
French:
Frisian:
7073 Nepali:
7082 Norwegian:
7089 Oriya:
No video from HDMI(SUB)
terminal
7879
Vietnamese:
V.OFF
7982 Volapük:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
7176 Pashto, Pushto: 8083 Welsh:
7565 Persian:
6869 Polish:
6976 Portuguese:
7576 Punjabi:
7178 Quechua:
7065 Wolof:
8076 Xhosa:
8084 Yiddish:
8065 Yoruba:
8185 Zulu:
∫ Audio attribute
Display
Meaning
LPCM/
Digital/
Digital+/
TrueHD/DTS/DTS-ES Mtrx/
Signal type
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
ch (channel)
k (kHz)
Number of channels
Sampling frequency
Number of bits
b (bit)
bps (bit per second)
Transfer rate of bit
42
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal system:
NTSC
Operating temperature range:
i5 oC to i35 oC (i41 oF to i95 oF)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output:
1.0 Vp-p (75 ≠)/Pin jack:1 system
Component video output (Y:green, PB:blue, PR:red):
Y:1.0 Vp-p (75 )/PB, PR:0.7 Vp-p (75 /Pin jack:1 system
Audio output: 2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
≠
≠)
7.1 channel discrete output:1 system
(2 channel + 5.1 channel discrete output)
Digital audio output:
Optical digital output : Optical terminal
Coaxial digital output : Pin jack
Type A (19 pin) : 2 system(Main/Sub)
HDMI (3D, Content Type)
HDMI AV output:
This unit supports “HDAVI Control 5” function.
SD card slot:
USB slot:
Ethernet:
Connector : 1 system
USB2.0 : 2 systems
10BASE-T/100BASE-TX : 1 system
LASER Specification
Class I LASER Product:
Wave length:790 nm (CDs)/650 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous radiation is emitted with the
safety protection
Power supply:
Power consumption:
Power consumption in standby mode:
AC 120 V, 60 Hz
Approx. 31 W
Approx. 0.1 W
Power consumption in quick start standby mode:
Approx. 7.7 W
Dimensions (WkDkH)
Including the projecting parts:
430 mmk245 mmk66 mm
(Approx. 16 15/16zk9 11/16zk2 5/8z)
Approx. 2.6 kg (5.7 lbs)
Mass (Weight):
Wireless LAN Adaptor (DY-WL10)
Dimensions (WkDkH):
44 mmk72 mmk27 mm
(1 3/4zk2 7/8zk1 1/8z)
Approx. 29 g (1.02 oz)
Tx 1, Rx 2
Mass (Weight):
Antenna:
Interface:
USB2.0
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz/5.47 GHz - 5.825 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)*:
IEEE802.11n:
IEEE802.11g / IEEE802.11a:
IEEE802.11b:
Tx Max. 150 Mbps, Rx Max. 300 Mbps
Max. 54 Mbps
Max. 11 Mbps
Access Mode:
Infrastructure mode
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
Security:
(This unit supports WPA and WPA2 encryption.)
* Transfer rates are theoretical values; however, actual
communication rate will vary according to communication
environment or connected equipment.
Specifications are subject to change without notice.
43
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray
Disc Assosiation.
Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
(2) the software owned by third party and licensed to
Panasonic Corporation,
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS logos are
trademarks of DTS, Inc.
(3) the software licensed under the GNU General Public
License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General
Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed
under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to
the terms and conditions of GPL v2 and LGPL v2.1, as the
case may be at
In addition, the software categorized as (3) and (4) are
copyrighted by several individuals. Please refer to the
copyright notice of those individuals at
Product includes software. © DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
The GPL/LGPL software is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY, without even
the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC/VC-1 Video. No license is
granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See
At least three (3) years from delivery of products, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our
cost of physically performing source code distribution, a
complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
Source code is also freely available to you and any other
member of the public via our website below.
HDAVI ControlTM is a trademark of Panasonic Corporation.
x.v.ColorTM is a trademark.
VIERA LinkTM is a trademark of Panasonic Corporation.
VIERA CASTTM is a trademark of Panasonic Corporation.
EZ SyncTM is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
DivX® is a registered trademark of DivX, Inc., and is used
under license.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc Association.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google,Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
DLNA®, the DLNA Logo and DLNA CERTIFIEDTM are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
Windows is a registered trademark of Microsoft Corporation
in the United States and other countries.
44
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed
digital video and audio signals on a single cable.
AVCHD
AVCHD is a new format (standard) for high-definition video
cameras that can be used to record and play high-resolution
HD images.
Local storage
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various
interactive features in addition to playing normal video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those
found on CDs.
Deep Color
Deep Color is a name for the device that can reproduce
greater color gradation (4096 steps) when connected to a TV
that supports the Deep Color with an HDMI cable. You can
enjoy exceptionally rich, natural-looking colors, with smooth,
detailed gradation and minimal color banding. [A lower color
gradation (256 steps), without Deep Color, will be reproduced
if connected to a TV which does not support Deep Color. The
unit will automatically set appropriate output to suit the
connected TV.]
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080
High-Definition video signal.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
DLNA (Digital Living Network Alliance) [BDT350]
DLNA is a standard that makes DLNA Certified digital
electronics easier and more convenient to use on a home
network.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital
audio, enabling you to enjoy digital audio with no hassle.
Dolby Digital
x.v.ColorTM
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
x.v.ColorTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded color in
motion pictures, and that follow the rules for signal
transmission.
Dolby Digital Plus
You can enjoy vivid colors of wider color ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColorTM with HDMI cable.
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
output.
24p
Dolby TrueHD
This is a progressive image recorded at a rate of 24 frames
per second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There
is good separation between the channels, so realistic sound
effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theaters. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio
This is a lossless audio format and compatible with 96 kHz/
7.1ch or less. In addition, faithful reproduction of the master
audio is enabled using lossless audio encoding technology.
BD-Video supports up to 7.1 channel output.
45
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
f your product does not work properly because of a defect in materials or
improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
I
workmanship, Panasonic Consumer Electronics Company (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new
or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
Product or Part Name
Parts
Labor
Blu-ray Disc Player, Portable
Blu-ray Disc Player
1 year 90 days
Blu-ray Home Theater System
1 year 1 year
DVD Player, Portable DVD Player 1 year 90 days
DVD Recorder
1 year 90 days
Rechargeable Batteries (pack),
DVD-RAM Disc (defective
exchange)
Not
10 days
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you.
Applicable
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.
Not
90 days
Wireless LAN adaptor
Applicable
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY
THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service
Customer Services Directory (United States and Puerto Rico)
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
or, contact us via the web at:
McAllen, TX 78503
When shipping the unit, carefully pack, include all accessories, and send it
prepaid, adequately insured and preferably in the original carton. If Lithium Ion
batteries are shipped by air the package must be labeled “Contains Lithium Ion
Battery (No lithium metal)”. Damaged batteries are prohibited from shipment by
US Mail. Batteries must be securely packed in a manner to prevent
short-circuiting and a package cannot contain more than 3 Lithium Ion
batteries. Include a letter detailing the complaint, a return address and provide
a daytime phone number where you can be reached. A valid registered receipt
is required under the Limited Warranty.
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
MODEL NUMBER
SERIAL NUMBER
TELEPHONE NUMBER
46
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
PANASONIC PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period
as stated below from the date of original purchase.
Technics Audio Product
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
Ninety (90) days
Panasonic Portable/Clock Radio (without Tape, CD, MD)
Panasonic Audio/SD Audio Product
Panasonic BD/DVD Product
Panasonic Combination DVD Player/VCR
Panasonic Combination DVD Recorder/VCR
Accessories including rechargeable batteries
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed,
subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been
altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is
used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is
required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre:
Telephone #:
1-800 #:
(905) 624-5505
1-800-561-5505
Fax #:
(905) 238-2360
Email link:
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link : “ServicentresTM locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
47
VQT2J87 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida en
español
Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de vídeo
adecuada en el televisor.
(Spanish Quick Reference)
Conexiones básicas
1 Pulse [Í POWER] para encender la
unidad.
Conexión a un televisor
compatible con HDMI
Después de conectar su nuevo reprodutor y pulsar el
botón de encendido, aparecerá la pantalla de la
configuración básica.
2 Inserte el medio.
Cable HDMI
HDMI IN
Inicia la reproducción
Pulse [1] (PLAY).
Parada
Conexión a un televisor con un
cable para audio/vídeo
Pulse [∫].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Cable de audio/
vídeo (incluido)
Pulse [
posición.
La posición se borra si se abre la bandeja o se pulsa [
veces para visualizar “STOP” en el visor de la unidad.
1] (PLAY) para reiniciar la reproducción desde esta
≥
∫] varias
R
L
AUDIO IN VIDEO IN
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
Pausa
Conexión a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI
Pulse [;].
≥
Pulse [;
]
otra vez o [1] (PLAY) para reiniciar la reproducción.
Búsqueda/Cámara lenta
HDMI IN
Búsqueda
Durante la reproducción, pulse [6] o [5].
≥ Música y MP3: La velocidad está fija en un paso.
Cable HDMI
Cámara lenta
Durante la pausa, pulse [6] o [5].
≥ BD-Video y AVCHD: Sólo dirección en avance [5].
Altavoces multicanal
Amplificador/Receptor
La velocidad aumenta hasta 5 pasos.
≥ Pulse [1] (PLAY) para recuperar la velocidad de
reproducción normal.
Cable HDMI
HDMI IN
HDMI OUT
Salto
Conecte el cable de
Durante la reproducción o la pausa, pulse [:] o [9].
Salta hasta el título, capítulo o pista que desee reproducir.
≥ Cada pulsación aumenta el número de saltos.
alimentación de CA por último
A una toma de corriente doméstica
AC IN
Cable de alimentación de CA (incluido)
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
48
VQT2J87(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A AC Power Connection . . . . . . . . 14
I IP address. . . . . . . . . . . . . . . . . . 33
J JPEG . . . . . . . . . . . . . . . . . . . 24, 40
L LAN . . . . . . . . . . . . . . . . . . . . . . . 12
Q Quick Start . . . . . . . . . . . . . . . . . 33
R Random play . . . . . . . . . . . . . . . 29
Re-master. . . . . . . . . . . . . . . . . . 29
Remote control . . . . . . . . . 4, 5, 17
Repeat play . . . . . . . . . . . . . . . . 29
Restore Default Settings. . . . . . 33
Resume play function . . . . . . . . 19
S SD card. . . . . . . . . . . . . . . . . . 7, 21
Setup menu . . . . . . . . . . . . . . . . 30
Slideshow. . . . . . . . . . . . . . . . . . 24
Slow-motion. . . . . . . . . . . . . . . . 19
Soundtrack. . . . . . . . . . . . . . . . . 28
Status Message . . . . . . . . . . . . . 19
Still picture. . . . . . . . . . . . . . . . . 24
Subtitle . . . . . . . . . . . . . . . . . . . . 28
U USB device. . . . . . . . . . . . . . . . . . 7
V VIERA CASTTM . . . . . . . . . . . . . . 25
Angle . . . . . . . . . . . . . . . . . . . . . . 28
Audio
Changing audio . . . . . . . . . . . . 19
Channel . . . . . . . . . . . . . . . . . . 28
Language . . . . . . . . . . . . . . 28, 30
Language
Audio . . . . . . . . . . . . . . . . . 28, 30
Menu . . . . . . . . . . . . . . . . . . . . 30
On-screen . . . . . . . . . . . . . . . . 31
Soundtrack. . . . . . . . . . . . . . . . 28
Subtitle . . . . . . . . . . . . . . . . 28, 30
AVCHD. . . . . . . . . . . . . . . . . . . . . 40
B BD-Live . . . . . . . . . . . . . . . . . . . . 21
BD-Video Ratings. . . . . . . . . . . . 30
BONUSVIEW . . . . . . . . . . . . . . . . 21
C Chapter . . . . . . . . . . . . . . . . . . . . 20
Cleaning . . . . . . . . . . . . . . . . . . . . 4
Connection . . . . . . . . . . . . 8–12, 14
D Deep Color . . . . . . . . . . . . . . . . . 45
Direct Navigator . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . 22, 40
DLNA . . . . . . . . . . . . . . . . . . . . . . 26
DNS Server . . . . . . . . . . . . . . . . . 33
Dolby Digital . . . . . . . . . . . . . 31, 38
Dolby Digital Plus. . . . . . . . . 31, 38
Dolby TrueHD . . . . . . . . . . . . 31, 38
DTS . . . . . . . . . . . . . . . . . . . . 31, 38
DTS-HD . . . . . . . . . . . . . . . . . 31, 38
DVD-Video Ratings. . . . . . . . . . . 30
F Finalize . . . . . . . . . . . . . . . . . . . . . 7
Firmware update. . . . . . . . . . . . . 17
Frame-by-frame . . . . . . . . . . . . . 19
H HDMI . . . . . . . . . . . . . . . . . . . . 8, 10
Local storage . . . . . . . . . . . . . . . 45
M MPEG2 . . . . . . . . . . . . . . . . . . . . 40
MP3 . . . . . . . . . . . . . . . . . . . . 25, 40
N Network
Connection. . . . . . . . . . . . . . . . 12
Setting . . . . . . . . . . . . . . . . 15, 33
O Off Timer. . . . . . . . . . . . . . . . . . . 33
On-screen Language. . . . . . . . . 31
P Picture-in-picture. . . . . . . . . . . . 21
Playback
VIERA LinkTM
AVCHD . . . . . . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . . 19
JPEG . . . . . . . . . . . . . . . . . . . . 24
MPEG2 . . . . . . . . . . . . . . . . . . 19
MP3 . . . . . . . . . . . . . . . . . . . . . 25
“HDAVI ControlTM” . . . . . . . . . . 27
W Wireless LAN . . . . . . . . . . . . . . . 12
X x.v.ColorTM . . . . . . . . . . . . . . . . . 45
Playlists . . . . . . . . . . . . . . . . . . . 18
Pop-up menu . . . . . . . . . . . . . . . 19
Proxy Server. . . . . . . . . . . . . . . . 33
P4HD . . . . . . . . . . . . . . . . . . . . . . 45
24p . . . . . . . . . . . . . . . . . . . . 29, 32
3D . . . . . . . . . . . . . . . . . . . . . . . . 23
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
(Inside of product)
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
Panasonic Canada Inc.
pr
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
C Panasonic Corporation 2010
Printed in China
VQT2J87
F0110SK0
Download from Www.Somanuals.com. All Manuals Search And Download.
|