HARDWARE REFERENCE
Gateway Notebook
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Accessing the online User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Gateway contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Gateway model and serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Microsoft Certificate of Authenticity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
For more information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Identifying features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Keyboard area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting the dial-up modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Waking up your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning off your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Restarting (rebooting) your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
System key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning your wireless radio on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Identifying drive types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Inserting a CD or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the memory card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Memory card types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Inserting a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Recalibrating the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Ordering accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Preventing static electricity discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Replacing the DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Replacing the hard drive kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Replacing the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Removing the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Installing the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Regulatory compliance statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Wireless guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
United States of America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1: About this reference
About this guide
This guide includes information and maintenance instructions that are specific
to your model of Gateway notebook. For all other notebook information, see
your online User Guide.
Accessing the online User Guide
In addition to this guide, the online User Guide has been included on your hard
drive. The User Guide is an in-depth, easy-to-read manual that includes
information on the following topics:
■ Help and technical support
■ Using and customizing Windows and other software
■ Controlling audio and video settings
■ Using the Internet
■ Protecting your files
■ Playing and recording media
■ Networking
■ Maintenance and troubleshooting
To access the online User Guide:
■ Click Start, All Programs, then click Gateway Documentation.
Gateway contact information
Gateway model and serial number
Important
The label shown in this section is for
informational purposes only. Label
information varies by model, features
ordered, and location.
The label on the bottom of your notebook contains information that identifies
your notebook model and its features. Gateway Customer Care will need this
information if you call for assistance.
Online Support:
Tech Support Phone:
Hours:
Model:
S/No:
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Microsoft Certificate of Authenticity
Microsoft Certificate of Authenticity
The Microsoft Certificate of Authenticity label found on the bottom of your
notebook includes the product key code for your operating system.
For more information
specifications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2
Checking Out Your Gateway Notebook
• Identifying features
• Connecting the AC adapter
• Connecting the dial-up modem
• Connecting to a cable or DSL modem or to an Ethernet
network
• Turning your notebook on and off
• Using the status indicators
• Using the keyboard and the EZ Pad touchpad
• Adjusting the volume
• Connecting to a wireless network
• Using the DVD drive
• Using the memory card reader
• Adding and removing a PC card
• Changing batteries
• Recalibrating the battery
• Ordering accessories
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Identifying features
Front
LCD panel
Speaker
Headphone jack
Microphone jack
Power indicator
Speaker
release latch
Battery
charge
indicator
Component
Icon
Description
Speakers
Provide audio output when headphones or amplified speakers are not
plugged in.
LCD panel release latch
Battery charge indicator
Slide to open the LCD panel.
■
LED blue - battery is fully charged.
■
LED purple - battery is charging.
■
LED blinking red - battery charge is very low.
■
LED solid red - battery is malfunctioning.
■
LED on - notebook is on.
Power indicator
■
LED blinking - notebook is in Standby mode.
■
LED off - notebook is off.
Microphone jack
Headphone jack
Plug a microphone into this jack.
Plug amplified speakers or headphones into this jack. The built-in
speakers are turned off when speakers or headphones are plugged
into this jack.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying features
Left
Kensington lock slot
S-Video out jack
Ventilation fan
DVD drive
Component
Icon Description
Kensington™
lock slot
Secure your notebook to an object by connecting a Kensington cable lock to this
slot.
S-Video out jack
(optional)
Plug an S-Video device, such as a television, into this optional jack. For more
information, see Viewing the display on a television in the online User Guide.
Ventilation fan
Helps cool internal components.
Warning: Do not work for long periods with the notebook resting on your lap.
If the air vents are blocked, the notebook may become hot enough to harm your
skin.
Caution: Do not block or insert objects into these slots. If these slots are blocked,
your notebook may overheat resulting in unexpected shutdown or permanent
damage to the notebook.
Caution: Provide adequate space around your notebook so air vents are not
obstructed. Do not use the notebook on a bed, sofa, rug, or other similar surface.
DVD drive
Insert CDs or DVDs into this drive. For more information, see “Using the DVD
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Right
Memory card
reader
USB ports
PC Card slot
USB ports
Ethernet jack
IEEE 1394 port
Modem jack
Component
Icon Description
PC Card slot
Insert one Type II PC Card into this slot. For more information, see “Adding and
IEEE 1394 port
Plug an IEEE 1394 (also known as Firewire® or i.Link®) device (such as a digital
camcorder) into this 4-pin IEEE 1394 port.
Memory card reader
Insert a memory card from a digital camera, MP3 player, PDA, or cellular
telephone into the memory card reader. For more information, see “Using the
Stick®, Memory Stick Pro®, Mini Secure Digital®, MultiMediaCard™,
RS-MultiMediaCard™, and Secure Digital™ cards.
USB ports
Plug USB devices (such as a diskette drive, flash drive, printer, scanner,
camera, keyboard, or mouse) into these ports.
Ethernet jack
Plug an Ethernet network cable into this jack. The other end of the cable can
be plugged into a cable modem, DSL modem, or an Ethernet network jack.
For more information, see “Connecting to a cable or DSL modem or to an
Modem jack
Plug a modem cable into this jack. For more information, see “Connecting the
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying features
Back
Power connector
Monitor port
Component
Power connector
Monitor port
Icon
Description
Plug the AC adapter cable into this connector.
Plug an analog VGA monitor or projector into this port. For more
information, see “Viewing the display on a projector or monitor” in the
online User Guide.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Bottom
Battery
Battery lock
Memory bay
Battery latch
System
label
Hard
drive
bay
Component
Icon
Description
Battery latch
Slide to release the battery. For more information, see “Changing batteries”
Battery
Provides power when the notebook is not plugged into AC power.
Memory bay
Install a memory module into this bay. For more information, see “Adding
Battery lock
System label
Hard drive bay
Slide to unlock the battery. For more information, see “Changing batteries”
Includes the product model number. For more information, see “Gateway
The hard drive is located in this bay. For more information, see “Replacing
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying features
Keyboard area
Power
button
Keyboard
Touchpad
Status indicators
Component
Icon
Description
Power button
Press to turn the power on or off. You can also configure the power button for
Standby/Resume mode. For more information on configuring the power button
mode, see “Changing Power-Saving Settings” in the online User Guide.
Keyboard
Touchpad
Provides all the functionality of a mouse. For more information, see “Using the
Status indicators
Inform you when a drive is in use or when a button has been pressed that affects
how the keyboard is used. For more information, see “Using the status indicators”
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Connecting the AC adapter
Warning
Do not attempt to disassemble the AC
adapter. The AC adapter has no
You can run your notebook using an AC adapter or your notebook’s battery. The
battery was shipped to you partially charged. You should use the AC adapter
right away to fully charge the battery. Allow three hours for the battery to fully
charge.
user-replaceable or user-serviceable
parts inside. The AC adapter has
dangerous voltages that can cause
serious injury or death. Contact Gateway
about returning defective AC adapters.
To connect the AC adapter:
1 Connect the power cord to the AC adapter.
Caution
Make sure that you use the AC adapter
that came with your notebook or one of
the same type purchased from Gateway.
Replace the power cord if it becomes
damaged. The replacement cord must be
of the same type and voltage rating as
the original cord or your notebook may
be damaged.
Important
If the battery charge indicator does not
turn blue after three hours, contact
Important
If the battery is not fully charged before
you use your notebook on battery power
for the first time, the battery life may be
much shorter than you expect. If the
battery life seems short even after being
charged for three hours, the battery may
need to be recalibrated. For information
on recalibrating the battery, see
2 Connect the AC adapter to your notebook’s power connector.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the dial-up modem
steps until it turns on:
a Unplug the adapter from your notebook, then plug it back in.
b Press FN+F1 to toggle the status lights on and off.
4 When you finish using your notebook for the first time, turn off your
notebook and leave your notebook connected to AC power until the
battery charge indicator turns blue.
Protecting from power source problems
Warning
High voltages can enter your notebook
through both the power cord and the
modem connection. To protect your
notebook and avoid electrical shock, use
a surge protector. If you have a telephone
modem, use a surge protector that has a
modem jack. If you have a cable modem,
use a surge protector that has an
During a power surge, the voltage level of electricity coming into your notebook
can increase to levels far above normal levels and cause data loss or system
damage. Protect your notebook and peripheral devices by connecting them to
a surge protector, which absorbs voltage surges and prevents them from
reaching your notebook.
antenna/cable TV jack. During an
electrical storm, unplug both the surge
protector and the modem.
Connecting the dial-up modem
Warning
To reduce the risk of fire, use only No. 26
AWG or larger telecommunications line
cord.
Your notebook has a built-in 56K modem that you can use to connect to a
standard telephone line.
To connect the modem:
1 Insert one end of the modem cable into the modem jack
on the right
side of your notebook.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
2 Insert the other end of the modem cable into a telephone wall jack. The
modem will not work with digital or PBX telephone lines.
3 Start your notebook, then start your communications program.
Connecting to a cable or DSL modem or to an Ethernet
network
Your notebook has a network jack that you can use to connect to a cable or DSL
modem or to an Ethernet network.
To connect to a cable or DSL modem or to an Ethernet network:
1 Insert one end of the network cable into the network jack
on the right
side of your notebook.
2 Insert the other end of the network cable into a cable modem, DSL
modem, or Ethernet network jack.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting your notebook
Starting your notebook
Warning
Do not work for long periods with the
notebook resting on your lap. If the air
vents are blocked, the notebook may
become hot enough to harm your skin.
To start your notebook:
1 Slide the latch on the front of your notebook, then lift the LCD panel.
2 Press the power button located above the keyboard.
Caution
Provide adequate space around your
notebook so air vents are not obstructed.
Do not use the notebook on a bed, sofa,
rug, or other similar surface.
Tips & Tricks
For more information about changing
the power button mode, see “Changing
Power-Saving Settings” in the online User
Guide.
3 If you are starting your notebook for the first time, follow the on-screen
instructions to set up your notebook.
Waking up your notebook
Tips & Tricks
For more information about Standby
mode, see “Changing power modes” in
the online User Guide.
When you have not used your notebook for several minutes or if you close the
LCD panel without turning off your notebook, it may enter a power-saving
mode called Standby. While in Standby, the power indicator flashes. If your
notebook is in Standby mode, press the power button to “wake” it up.
Turning off your notebook
Important
If for some reason you cannot use the
Turn Off Computer option in Windows to
turn off your notebook, press and hold
the power button for about five seconds,
then release it.
To turn off your notebook:
1 Click Start, then click Turn Off Computer. The Turn Off Computer dialog
box opens.
2 Click Turn Off. Windows shuts down and turns off your notebook.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Restarting (rebooting) your notebook
Important
If your notebook does not turn off
immediately, complete the following
steps until the notebook turns off:
1. Press and hold the power button for
about five seconds, then release it.
2. Unplug the power cord and remove the
battery for more than 10 seconds.
If your notebook does not respond to keyboard, touchpad, or mouse input, you
may have to close programs that are not responding. If closing unresponsive
programs does not restore your notebook to normal operation, you may have
to restart (reboot) your notebook.
To close unresponsive programs and restart your notebook:
1 Press CTRL+ALT+DEL. The Windows Security dialog box opens.
2 Click Task Manager. The Windows Task Manager dialog box opens.
3 Click the program that is not responding.
4 Click End Task.
5 Click X in the top-right corner of the Windows Task Manager dialog box.
6 If your notebook does not respond, turn it off, wait ten seconds, then turn
it on again.
As a part of the regular startup process, a program to check the disk status
runs automatically. When the checks are finished, Windows starts.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the status indicators
Using the status indicators
Important
If none of the indicators are on, you may
need to press FN+F1 to toggle the status
indicators on.
Status indicators inform you when a drive is being used or when a button has
been pressed that affects how the keyboard is used. The status indicators are
located below the touchpad.
Hard drive
Wireless network
Disc drive
Caps lock
Num lock
Indicator
Icon
Description
■
LED on - Wireless radio is turned on.
LED off - Wireless radio is turned off.
Wireless network (optional)
■
■
LED on - Caps lock is turned on.
Caps lock
Num lock
Disc drive
Hard drive
■
LED off - Caps lock is turned off.
A
1
■
LED on - Numeric keypad is turned on.
LED off - Numeric keypad is turned off.
■
■
LED blinking - The disc drive is in use.
LED off - The disc drive is not in use.
■
■
LED blinking - The hard drive is in use.
LED off - The hard drive is not in use.
■
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Using the keyboard
Tips & Tricks
You can attach an external keyboard to
the notebook using a USB port. You do
not need to shut down the notebook to
connect a USB keyboard.
Your notebook features a full-size keyboard that functions the same as a desktop
computer keyboard. Many of the keys have been assigned alternate functions,
including shortcut keys for Windows, function keys for specific system
operations, and the Num Lock keys for the numeric keypad.
Function keys/ System keys
Numeric
keypad
Navigation
keys
FN key
Arrow keys
Windows key
Application key
Key types
The keyboard has several different types of keys. Some keys perform specific
actions when pressed alone and other actions when pressed in combination
with another key.
Key type Icon
Description
Function
keys
Press these keys labeled F1 to F12 to perform actions in programs. For example,
pressing F1 may open help.
Each program uses different function keys for different purposes. See the program
documentation to find out more about the function key actions.
System keys
Navigation
keys
Press these keys to move the cursor to the beginning of a line, to the end of a line, up
the page, down the page, to the beginning of a document, or to the end of a document.
Arrow keys
Press these keys to move the cursor up, down, right, or left.
Application
key
Press this key for quick access to shortcut menus and help assistants in Windows.
Windows
key
Press this key to open the Windows Start menu. This key can also be used in
combination with other keys to open utilities like F (Search utility), R (Run utility), and
E (Explorer utility).
FN key
Press the FN key in combination with a colored system key to perform a specific action.
Numeric
keypad
Use these keys to type numbers when the numeric keypad is turned on. Press FN+
to turn on the numeric keypad.
1
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the keyboard
System key combinations
When you press the FN key and a system key at the same time, your notebook
performs the action identified by the text or icon on the key.
Press and hold FN, then
press this system key...
To...
Toggle the status indicators on or off. For more information, see “Using
Turn the optional wireless network on or off. For more information, see
“Wireless Networking” in your online User Guide.
Warning: Radio frequency wireless communication can interfere with
equipment on commercial aircraft. Current aviation regulations require
wireless devices to be turned off while traveling in an airplane.
IEEE 802.11g, IEEE 802.11b, and IEEE 802.11a communication devices are
examples of devices that provide wireless communication.
Enter Standby mode. Press the power button to leave Standby mode. For
more information, see “Changing Power-Saving Settings” in your online
User Guide.
Toggle the notebook display in the following order:
■
The LCD
■
An external monitor or projector (a monitor or projector must be plugged into
the monitor port on your notebook)
Both displays at the same time
■
For more information, see Viewing the display on a projector or monitor in
the online User Guide.
Display the power status box in the upper-left corner of your display. The
box shows the battery charge level, the BIOS version, and whether the
optional wireless network is being used. Press the key combination again
to close this box.
5
Increase the LCD panel brightness above the normal brightest setting. Use
this feature in bright lighting situations, such as outside in bright sunlight.
Press a second time to decrease the brightness below the normal lowest
brightness setting. Use this feature in dim lighting situations.
Press a third time to return the display to the normal brightness setting.
Important: Using this feature will affect battery performance.
Play or pause the CD or DVD.
Stop playing the CD or DVD.
Skip back one CD song or DVD track.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Press and hold FN, then
press this system key...
To...
Skip ahead one CD song or DVD track.
Increase the brightness of the display.
Decrease the brightness of the display.
Increase volume. For more information, see “Adjusting the volume” on
Decrease volume. For more information, see “Adjusting the volume” on
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the EZ Pad touchpad
Using the EZ Pad touchpad
Tips & Tricks
For instructions on how to adjust the
double-click speed, pointer speed,
right-hand or left-hand configuration,
and other touchpad settings, see
“Changing the mouse or touchpad
settings” in the online User Guide.
The EZ Pad™ consists of a touchpad, two buttons, and a scroll zone.
Touchpad
Scroll
zone
Tips & Tricks
You received your notebook with the EZ
Pad touchpad set to only accept clicking
by using the touchpad buttons. You can
change this feature to allow tapping on
the touchpad to simulate clicking the left
button. For more information, see
“Changing the mouse or touchpad
settings” in the online User Guide.
Left button
Right button
When you move your finger on the touchpad, the pointer (arrow) on the screen
moves in the same direction. You can use the scroll zone to scroll through
documents. Use of the scroll zone may vary from program to program.
You can use the EZ-Pad left and right buttons below the touchpad to select
objects.
To...
Do this...
Move the pointer on the
screen.
Move your finger around on
the touchpad. If you run out
of space and need to move
the pointer farther, lift your
finger, move it to the
middle of the touchpad,
then continue moving your
finger.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
To...
Do this...
Select an object on the
screen.
Position the pointer over
the object. Quickly press
and release the left button
once. This action is called
clicking.
Start a program or open a
file or folder.
Position the pointer over
the object. Press the left
button twice in rapid
succession. This action is
called double-clicking.
Access a shortcut menu or
find more information
about an object on the
screen.
Position the pointer over
the object. Quickly press
and release the right
button once. This action is
called right-clicking.
Move an object on the
screen.
Position the pointer over
the object. Press the left
button and hold it down,
then use the touchpad to
move (drag) the object to
the appropriate part of the
screen. Release the button
to drop the object where
you want it.
Adjusting the volume
Tips & Tricks
For instructions on how to adjust the
volume in Windows, see “Adjusting the
Volume” in the online User Guide.
You can use the volume control to adjust the overall volume of your notebook.
To adjust the overall volume level using hardware controls:
■ If you are using external speakers, turn the knob on the front of the
speakers.
-OR-
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning your wireless radio on or off
Turning your wireless radio on or off
Warning
Radio frequency wireless communication
can interfere with equipment on
Your Gateway notebook may have a factory-installed wireless networking
mini-PCI card.
commercial aircraft. Current aviation
regulations require wireless devices to be
turned off while traveling in an airplane.
IEEE 802.11a, IEEE 802.11b, and IEEE
802.11g communication devices are
examples of devices that provide wireless
communication.
To turn the wireless radio on or off:
of the wireless status indicator, see “Using the status indicators” on
Warning
In environments where the risk of
interference to other devices or services is
harmful or perceived as harmful, the
option to use a wireless device may be
restricted or eliminated. Airports,
hospitals, and oxygen or flammable gas
laden atmospheres are limited examples
where use of wireless devices may be
restricted or eliminated. When in
environments where you are uncertain of
the sanction to use wireless devices, ask
the applicable authority for
authorization prior to use or turning on
the wireless device.
Tips & Tricks
For more information about using your
notebook on a wireless network, see
“Wireless Networking” in the online User
Guide.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Using the DVD drive
You can use your notebook to enjoy a wide variety of multimedia features.
Identifying drive types
Your Gateway notebook may contain one of the following drive types. Look on
the front of the drive for one or more of the following logos:
If your drive has this logo... This is your drive type... Use your drive for...
Installing programs, playing
DVD drive
audio CDs, playing DVDs, and
accessing data. You cannot use
this drive to create CDs or DVDs.
Installing programs, playing
Combination
audio CDs, playing DVDs,
accessing data, and recording
music and data to recordable CDs.
You cannot use this drive to create
DVDs.
DVD/CD-RW drive
Installing programs, playing
audio CDs, playing DVDs,
Multi-format double
layer DVD RW/CD-RW
drive
ROM/R/RW
accessing data, recording music
and data to CD-R or CD-RW discs,
and recording video and data to
DVD-R, DVD+R, DVD-RW,
DVD+RW, or double layer DVD+R
discs.
Note: To use the double layer
capability of the double layer
recordable DVD drive, the blank
DVDs you purchase must state
Double Layer, Dual Layer, or DL.
Using other types of blank media
will result in less capacity.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the memory card reader
Inserting a CD or DVD
[
Eject button
Manual eject hole
To insert a CD or DVD:
1 Press the eject button on the DVD drive. After the tray opens slightly, pull
the disc tray completely open.
Important
2 Place the disc in the tray with the label facing up, then press down carefully
When you place a single-sided disc in the
tray, make sure that the label side is
facing up. If the disc has two playable
sides, place the disc so the name of the
side you want to play is facing up.
on the disc until it snaps into place.
3 Push the tray in until it is closed.
Using the memory card reader
You can use memory cards to transfer pictures from a digital camera to your
notebook. You can also use the memory card reader to transfer data between
your notebook and a device that uses memory cards, such as a PDA, MP3 player,
or cellular telephone.
Memory card types
The memory card reader supports Memory Stick®, Memory Stick Pro®, Mini
Secure Digital®, MultiMediaCard™, RS-MultiMediaCard™, and Secure Digital™
cards.
Inserting a memory card
To insert a memory card:
■ Insert the memory card into the memory card slot with the label facing
up and the arrow on the label pointing towards the notebook.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Using a memory card
To access a file on a memory card:
1 Click Start, then click My Computer.
2 Double-click the drive letter (for example, the E: drive), then double-click
the file name.
Removing a memory card
Important
To remove a memory card:
Do not use the remove
hardware
icon in the taskbar to
1 Push the memory card into the notebook. The memory card pops out
remove the memory card. If you use the
remove hardware icon, your notebook
may not recognize your memory card
reader until you restart your notebook.
slightly.
2 Pull the memory card out of the notebook.
Adding and removing a PC Card
Your notebook has a PC Card slot (also known as a PCMCIA card slot). This slot
accepts one Type II card. You do not need to restart your notebook when
changing most cards because your notebook supports hot-swapping.
Hot-swapping means that you can insert a PC Card while your notebook is
running. If your PC Card does not work after hot-swapping, see the PC Card
manufacturer’s documentation for further information.
To insert a PC Card:
■ Push the card firmly into the PC Card slot, label-side up, until the outer
edge of the card is flush with the side of your notebook.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing batteries
To remove a PC Card:
Important
1 Click the remove hardware
click Stop.
icon in the taskbar, the PC Card name, then
If the remove hardware icon does not
appear on the taskbar, click the show
hidden icons
button.
-OR-
Turn off your notebook.
2 Release the eject button by pressing the PC Card eject button once.
3 Eject the PC Card by pressing the eject button again.
Changing batteries
Warning
Danger of explosion if battery is
incorrectly replaced.
If your notebook is connected to AC power, you can change the battery while
the notebook is turned on. If your notebook is not plugged into an AC outlet,
you must turn the notebook off while changing the battery.
Replace only with a battery specifically
manufactured for your Gateway
notebook. Discard used batteries
according to local hazardous material
regulations.
To change the battery:
The battery used in this device may
present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat
above 212°F (100°C), or incinerate.
Dispose of used battery promptly. Keep
away from children.
-OR-
If your notebook is on and is not plugged into an AC outlet, save your work
and turn off your notebook.
2 Close the LCD panel.
3 Turn your notebook over so the bottom is facing up.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
4 Slide the battery lock to the unlocked position.
5 Slide the battery release latch, then slide the battery out of the notebook.
6 Slide a recharged battery into the notebook until it snaps into place.
7 Slide the battery lock to the locked position.
8 Turn your notebook over.
9 Open the LCD panel.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalibrating the battery
Recalibrating the battery
Important
Do not interrupt the battery recalibration
process. If recalibration is interrupted,
you must start the process over again.
If your notebook unexpectedly goes into Standby mode while you are using it
but the battery charge is not low, you may need to recalibrate your battery. You
should also recalibrate the battery periodically to maintain the accuracy of the
battery gauge.
To recalibrate the battery:
1 Connect the AC adapter, then turn on your notebook.
2 As soon as it starts and you see a startup screen, press F2. The BIOS Setup
utility opens.
3 Open the Advanced menu.
4 Highlight Battery Auto Learning, then select Enabled by pressing the
spacebar.
5 Open the Exit menu, then highlight Exit Saving Changes and press ENTER.
6 Select Yes, then press ENTER.
The battery recalibration process begins and a screen opens showing you
the progress. The entire process will take several hours.
When the recalibration has finished, the message “Press [Esc] key to exit”
appears.
7 Press ESC. The battery charge indicator now displays an accurate battery
charge. If the battery charge indicator does not show an accurate charge,
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Gateway Notebook
Ordering accessories
Batteries
If you run your notebook on battery power for extended periods, you may want
to buy an additional battery so you can swap batteries when necessary. See
“Changing batteries” on page 27 for more information about using an
Carrying cases
Gateway has large-capacity carrying cases if you need additional space for
accessories or supplies.
Memory
Large programs, such as multimedia games or graphics programs, use a lot of
more information.
Printers
You can attach almost any type of printer to your notebook. The most common
types are inkjet and laser printers, which print in color or black and white.
Inkjet printers and cartridges are relatively inexpensive, but they are slower than
laser printers. Using an inkjet color printer, you can print pictures, banners, and
greeting cards, as well as documents.
Laser printers and cartridges are more expensive, but they print much faster
than inkjet printers. Laser printers are better than inkjet printers when you are
printing large documents.
USB flash drive
Use a USB flash drive for storing files or transferring files to another computer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
Preventing static electricity discharge
Warning
To avoid exposure to dangerous electrical
voltages and moving parts, turn off your
notebook and unplug the power cord,
modem cable, and network cable before
opening the case.
The components inside your notebook are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD).
Before installing or replacing components, follow these guidelines:
■ Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
Warning
To prevent risk of electric shock, do not
insert any object into the vent holes of the
notebook.
■ Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
Important
Before installing or replacing
components, you should read and
understand the information in this
section.
■ Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
■ Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
■ Touch a bare metal surface on your workbench or other grounded object.
Adding or replacing memory
Important
Use only memory modules designed for
your Gateway notebook.
Your notebook uses memory modules called SO-DIMMs (Small Outline Dual
Inline Memory Modules). The modules are available in various capacities and
any module can be placed in any slot.
Tools Required
You need a small Phillips screwdriver to
replace memory.
Memory bay
To add or replace memory modules:
2 Turn off your notebook.
3 Disconnect the AC adapter, modem cable, and network cable.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding or replacing memory
4 Disconnect all peripheral devices and remove any PC cards.
Tips & Tricks
6 Remove the keyboard and removable screws shown in the following
picture, loosen the remaining five captive screws (these screws cannot be
removed), then remove the memory bay cover.
The screw hole is marked with a K.
Removable
screw
Captive
screw
Captive
screw
Captive
screw
Keyboard
screw
Captive
screw
Captive
screw
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
7 If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.
8 Pull the memory module out of the slot.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the DVD drive
Important
9 Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so it can only be
inserted in one direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory bay.
Use only memory modules designed for
your Gateway notebook.
10 Gently push the module down until it clicks in place.
11 Replace the memory bay cover, then tighten the captive screws.
12 Replace the removable and keyboard screws.
13 Insert the battery, then turn your notebook over.
14 Connect the power adapter, modem cable, and network cable, then turn
on your notebook.
Replacing the DVD drive
If your DVD drive becomes damaged, you can replace it with a similar drive
obtained from Gateway.
Important
Replace the DVD drive only with a similar
drive provided by Gateway.
To replace the DVD drive:
1 Make sure that the DVD drive is empty.
Tools Required
You need a small Phillips screwdriver to
replace the DVD drive.
3 Turn off your notebook.
4 Disconnect the AC adapter, modem cable, and network cable.
5 Disconnect all peripheral devices and remove any PC Cards.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
Tips & Tricks
7 Remove the keyboard and removable screws shown in the following
picture, loosen the remaining five captive screws (these screws cannot be
removed), then remove the memory bay cover.
The screw hole is marked with a K.
Removable
screw
Captive
screw
Captive
screw
Captive
screw
Keyboard
screw
Captive
screw
Captive
screw
8 With a small Phillips screwdriver, remove the DVD drive screw, then put it
in a safe place.
Screw
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the DVD drive
9 Insert a straightened paper clip into the DVD drive’s manual eject hole,
push in the paper clip to eject the drive tray, then pull the drive tray open.
10 Carefully slide the drive out of the drive bay.
11 Slide the new DVD drive into the drive bay. Make sure that the drive fits
securely in the bay.
13 Replace the memory bay cover, then tighten the five captive screws.
14 Replace the removable and keyboard screws.
15 Insert the battery, then turn your notebook over.
16 Connect the power adapter, modem cable, and network cable, then turn
on your notebook.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
Replacing the hard drive kit
Tools Required
You need a small Phillips screwdriver to
replace the hard drive kit.
If you would like more hard drive capacity, you can replace your original drive
with a higher-capacity drive.
Hard drive kit
To replace the hard drive kit:
1 Create a Drivers and Applications Recovery disc using the procedure found
in the online User Guide.
3 Back up any data you want to transfer to the new hard drive. For more
information, see “Backing up files” in the online User Guide.
5 Turn off your notebook.
6 Disconnect the AC adapter, modem cable, and network cable.
7 Disconnect all peripheral devices and remove any PC cards.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the hard drive kit
9 Remove the two hard drive bay cover screws, slide the hard drive bay
cover, then remove it. The hard drive is attached to the back of the cover.
-OR-
11 Remove the screws that secure the hard drive to the hard drive cover.
Screws
Screws
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
12 Remove the cover from the old drive.
13 Insert the new drive label side up onto the cover so the screw holes line up.
14 Replace the screws that secure the cover to the drive.
15 Slide the new hard drive kit into your notebook, then replace the cover
screws.
16 Insert the battery, then turn your notebook over.
17 Connect the power adapter, modem cable, and network cable, then turn
on your notebook.
Replacing the keyboard
Important
Replace the keyboard only with a similar
keyboard provided by Gateway.
If your keyboard becomes damaged, you can replace it with a similar keyboard
obtained from Gateway.
Tools Required
You need a small Phillips and a small
flat-blade screwdriver to replace the
keyboard.
Removing the keyboard
To remove the keyboard:
2 Turn off your notebook.
3 Disconnect the AC adapter, modem cable, and network cable.
4 Disconnect all peripheral devices and remove any PC Cards.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the keyboard
Tips & Tricks
6 With a small Phillips screwdriver, remove the keyboard screw and put it
The screw hole is marked with a K.
in a safe place.
Keyboard
screw
7 Turn your notebook over so the top is facing up.
8 With a small Phillips screwdriver, remove the two hinge cover screws and
put them in a safe place.
Screw
Screw
9 Insert the small flat-blade screwdriver under the bottom of each hinge
cover and gently pry it up.
10 Carefully open the LCD panel to the fully opened position.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
Important
Inserting a piece of cloth between the
screwdriver and keyboard will help
prevent damage to your notebook.
11 Insert the small flat-blade screwdriver under the right end of the keyboard
cover and gently pry it up.
12 Pull the cover off the notebook. Be careful to not damage the LCD panel.
13 Lift the back edge of the keyboard slightly, then slowly slide it toward the
LCD panel to release the keyboard retaining tabs located on the front of
the keyboard.
14 Slowly rotate the keyboard toward you so it lies keys-down on top of your
notebook. Be careful to not damage the LCD panel.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the keyboard
15 Slide the black keyboard connector clip to the front of the notebook and
remove the cables. Be careful not to touch or damage any other
components.
Keyboard
connector
clip
Installing the keyboard
To install the keyboard:
1 Place the new keyboard keys-down on your notebook with the space bar
away from you.
Important
The keyboard cable is correctly oriented if
it is not twisted.
2 Make sure the black keyboard connector clip is fully moved toward the
front of the notebook, insert the cable into the connector, then slide the
black clip to lock the connector in place.
3 Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Maintaining and Upgrading Your Notebook
4 Insert the tabs on the front edge of the keyboard into the slot under the
palm rest. You may need to press down on the keyboard keys along the
front edge of the keyboard to seat the retaining tabs into their
corresponding slots.
5 Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place. Be careful to not damage the
LCD panel.
Caution
If the cover is not correctly replaced, your
notebook could be damaged when you
try to close the LCD panel.
6 Replace the keyboard cover. Press down on the cover in several places until
it clicks in place. The cover is correctly mounted when you can run your
finger along the cover and find no loose spots. The cover should be flat
all the way across.
7 Close the LCD panel, then replace the two hinge cover screws.
8 Turn your notebook over so the bottom is facing up.
9 Replace the keyboard screw.
10 Insert the battery, then turn your notebook over.
11 Connect the power adapter, the modem cable, and the network cable,
then turn on your notebook.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
Important safety information
Warning
Always follow these instructions to help
guard against personal injury and
damage to your Gateway system.
Your Gateway notebook is designed and tested to meet the latest standards for
safety of information technology equipment. However, to ensure safe use of this
notebook, it is important that the safety instructions marked on the notebook
and in the documentation are followed.
Warning
Do not use Gateway products in areas
classified as hazardous locations. Such
areas include patient care areas of
medical and dental facilities,
Setting up your system
■ Read and follow all instructions marked on the notebook and in the
documentation before you operate your notebook. Retain all safety and
operating instructions for future use.
oxygen-laden environments, or
industrial facilities.
Warning
To reduce the risk of fire, use only No. 26
AWG or larger telecommunications line
cord.
■ Do not use this notebook near water or a heat source such as a radiator.
■ Set up the notebook on a stable work surface.
■ The notebook should be operated only from the type of power source
indicated on the rating label.
■ If your notebook has a voltage selector switch, make sure that the switch
is in the proper position for your area. The voltage selector switch is set
at the factory to the correct voltage.
■ Openings in the notebook case are provided for ventilation. Do not block
or cover these openings. Make sure you provide adequate space, at least
6 inches (15 cm), around the notebook for ventilation when you set up
your work area. Never insert objects of any kind into the notebook
ventilation openings.
■ Some notebook are equipped with a three-wire power cord to make sure
that the notebook is properly grounded when in use. The plug on this cord
will fit only into a grounding-type outlet. This is a safety feature. If you are
unable to insert the plug into an outlet, contact an electrician to install
the appropriate outlet.
■ If you use an extension cord with this notebook, make sure that the total
ampere rating on the products plugged into the extension cord does not
exceed the extension cord ampere rating.
■ If your notebook is fitted with a TV Tuner, cable, or satellite receiver card,
make sure that the antenna or cable system is electrically grounded to
provide some protection against voltage surges and buildup of static
charges.
Care during use
■ Do not walk on the power cord or allow anything to rest on it.
■ Do not spill anything on the notebook. The best way to avoid spills is to
avoid eating and drinking near your notebook.
■ Some notebooks have a replaceable CMOS battery on the system board.
There is a danger of explosion if the CMOS battery is replaced incorrectly.
Replace the battery with the same or equivalent type recommended by
the manufacturer. Dispose of batteries according to the manufacturer’s
instructions.
■ When the notebook is turned off, a small amount of electrical current still
flows through the notebook. To avoid electrical shock, always unplug all
power cables and modem cables from the wall outlets before cleaning the
notebook.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
■ Unplug the notebook from the wall outlet and refer servicing to qualified
personnel if:
■ The power cord or plug is damaged.
■ Liquid has been spilled into the notebook.
■ The notebook does not operate properly when the operating
instructions are followed.
■ The notebook was dropped or the cabinet is damaged.
■ The notebook performance changes.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
Regulatory compliance statements
Wireless guidance
Warning
Radio frequency wireless communication
can interfere with equipment on
commercial aircraft. Current aviation
regulations require wireless devices to be
turned off while traveling in an airplane.
802.11b (also known as wireless Ethernet
or Wifi) and Bluetooth communication
devices are examples of devices that
provide wireless communication.
Low power, Radio transmitting type devices (radio frequency (RF) wireless
communication devices), may be present (embedded) in your notebook system.
These devices may operate in the 2.4 GHz (i.e. 802.11b/g LAN & Bluetooth),
5.2 GHz (i.e. 802.11a LAN), and traditional cellular or PCS cellular bands (i.e.
Cellular data modem). The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in
the specific country sections (or country group sections). The wireless devices
in your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the
wireless device in, is not listed, please contact your local Radio Approval agency
for requirements. Wireless devices are closely regulated and use may not be
allowed.
Warning
In environments where the risk of
interference to other devices or services is
harmful or perceived as harmful, the
option to use a wireless device may be
restricted or eliminated. Airports,
Hospitals, and Oxygen or flammable gas
laden atmospheres are limited examples
where use of wireless devices may be
restricted or eliminated. When in
environments where you are uncertain of
the sanction to use wireless devices, ask
the applicable authority for
authorization prior to use or turning on
the wireless device.
The power output of the wireless device or devices that may be embedded in
your notebook is well below the RF exposure limits as known at this time.
Because the wireless devices (which may be embedded into your notebook)
emit less energy than is allowed in radio frequency safety standards and
recommendations, Gateway believes these devices are safe for use. Regardless
of the power levels, care should be taken to minimize human contact during
normal operation.
Warning
If your notebook came equipped with an
internal embedded wireless device, do
not operate the wireless device unless all
covers and shields are in place and the
notebook is fully assembled.
Measurements have been performed to show that the RF exposure is below
what is considered safe limits; however care should be taken to make sure the
user or bystanders keep the transmitter away from their body when the wireless
device is transmitting. The transmitting antenna installed in the top third of the
lid should be used in a manner to maintain 20 cm (8 inches) from user’s or
bystander’s bodies.
Caution
Wireless devices are not user serviceable.
Do not modify them in any way.
Modification to a wireless device will void
the authorization to use it. Please contact
Gateway for service.
The wireless devices installed in this system are intended to be used indoors.
In some areas, use of these devices outdoors is prohibited.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed to the left.
Caution
Only use drivers approved for the country
in which the device will be used. See the
Gateway System Restoration Kit, or
contact Gateway Customer Care for
additional information.
Important
Every country has different restrictions on
the use of wireless devices. Since your
notebook is equipped with a wireless
device, when traveling between countries
with your notebook, check with the local
Radio Approval authorities prior to any
move or trip for any restrictions on the
use of a wireless device in the destination
country.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory compliance statements
United States of America
Caution
Wireless devices are not user-serviceable.
Do not modify them in any way.
Modification to a wireless device will void
the authorization to use it. Contact
Gateway for service.
Federal Communications Commission (FCC) Intentional emitter per FCC Part 15
Low power, Radio transmitter type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz band and/or 5.15 – 5.35 GHz
band, may be present (embedded) in your notebook system. This section is only
applicable if these devices are present. Refer to the system label to verify the
presence of wireless devices.
Caution
The transmitting device embedded in this
notebook may not be used with any
antenna other than the one provided
with the notebook.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the
device and the body, for use of a wireless device near the body (this does not
include extremities). This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on. The power output of the wireless
device (or devices), which may be embedded in your notebook, is well below
the RF exposure limits as set by the FCC.
Caution
In order to comply with FCC requirements
this transmitter must not be operated (or
co-located) in conjunction with any other
transmitter or antenna installed in the
notebook.
The wireless devices installed in this system are intended to be used indoors.
In some areas, use of these devices outdoors is prohibited.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio and television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna
■ Increase the separation between the equipment and receiver
■ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
■ Consult the dealer or an experienced radio/TV technician for help.
Compliance Accessories: The accessories associated with this equipment are:
shielded video cable when an external monitor is connected. These accessories
are required to be used in order to ensure compliance with FCC rules.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
FCC declaration of conformity
Caution
Changes or modifications not expressly
approved by Gateway could void the FCC
compliance and negate your authority to
operate the notebook.
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
Caution
Recycle or dispose of the used notebook
properly according to federal, state and
local laws.
Product:
■ Gateway M360
■ Gateway M365
■ Gateway 6000 series
This device complies with Part 15 of the FCC Rules. Operation of this product is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning
California Proposition 65 Warning
This product contains chemicals, including lead, known to the State of California
to cause cancer, birth defects or reproductive harm.
Mercury Warning
Hg
Warning
The lamp in this display contains mercury. Do not put in trash. Recycle or dispose
as hazardous waste.
Telecommunications per Part 68 of the Code of Federal Regulations (CFR 47)
(applicable to products fitted with USA modems)
Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47)
rules. On the computer or modem card is a label that contains the FCC
registration number and Ringer Equivalence Number (REN) for this device. If
requested, this information must be provided to the telephone company.
A telephone line cord with a modular plug is required for use with this device.
The modem is designed to be connected to the telephone network or premises
wiring using a compatible modular jack which is Part 68-compliant. See
installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of
devices which may be connected to the telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming
call. In most areas, the sum of RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company.
If this device causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be
required. The telephone company may request that you disconnect the
equipment until the problem is resolved.
The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the operation of this equipment. If
this happens, the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
This equipment cannot be used on telephone company-provided coin service.
Connection to party line service is subject to state tariffs. Contact the state
public utility commission or public service commission for information.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory compliance statements
When programming or making test calls to emergency numbers:
■ Remain on the line and briefly explain to the dispatcher the reason for the
call.
■ Perform such activities in the off-peak hours such as early morning or late
evenings.
The United States Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic device to send
any message via a telephone fax machine unless such message clearly contains,
in a margin at the top or bottom of each transmitted page or on the first page
of the transmission, the date and time it is sent, an identification of the business,
other entity, or other individual sending the message, and the telephone
number of the sending machine or such business, other entity, or individual.
Refer to your fax communication software documentation for details on how
to comply with the fax-branding requirement.
Canada
Industry Canada (IC) Intentional emitter per RSS 210
Caution
Low power, Radio transmitter type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz band and/or 5.15 – 5.35 GHz
band, may be present (embedded) in your notebook system. This section is only
applicable if these devices are present. Refer to the system label to verify the
presence of wireless devices.
To prevent radio interference to licensed
service or co-channel Mobile Satellite
systems, this device is intended to be
operated indoors and away from
windows to provide maximum shielding.
Equipment (or its transmit antenna) that
is installed outdoors is subject to
licensing.
Wireless devices that may be in your system are only qualified for use in Canada
if an Industry Canada ID number is on the system label.
Caution
Wireless devices are not user-serviceable.
Do not modify them in any way.
Modification to a wireless device will void
the authorization to use it. Contact
Gateway for service.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm
(8 inches) from the body when wireless devices are on. The power output of the
wireless device (or devices), which may be embedded in your notebook, is well
below the RF exposure limits as set by Industry Canada.
Caution
The transmitting device embedded in this
notebook may not be used with any
antenna other than provide with the
notebook.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
Caution
The 802.11A radio LAN your notebook
may have been equipped with operates
in the same frequency range as high
power radar, which has priority use, and
may damage the radio LAN if both are
present and being used in the same area.
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the radio interference regulations
of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par Industrie Canada.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
Telecommunications per Industry Canada CS-03 (for products fitted with an
IC-compliant modem)
The Industry Canada label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network
protective, operation, and safety requirements. The Department does not
guarantee the equipment will operate to the users’ satisfaction.
Before installing this equipment, users should make sure that it is permissible
to be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
In some cases, the inside wiring associated with a single-line individual service
may be extended by means of a certified connector assembly. The customer
should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made
by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Warning
To avoid electrical shock or equipment
malfunction do not attempt to make
electrical ground connections by yourself.
Contact the appropriate inspection
authority or an electrician, as
Users should make sure, for their own protection, that the electrical ground
connections of the power utility, telephone lines, and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of
the Ringer Equivalence Numbers of all the devices does not exceed 5.
Japan
Japanese Modem Notice
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental information
Laser safety statement
Warning
All Gateway systems equipped with CD and DVD drives comply with the
appropriate safety standards, including IEC 825. The laser devices in these
components are classified as “Class 1 Laser Products” under a US Department
of Health and Human Services (DHHS) Radiation Performance Standard. Should
the unit ever need servicing, contact an authorized service location.
Use of controls or adjustments or
performance of procedures other than
those specified in this manual may result
in hazardous radiation exposure. To
prevent exposure to laser beams, do not
try to open the enclosure of a CD or DVD
drive.
EPA ENERGY STAR
®
As an ENERGY STAR Partner, Gateway has determined that this
product meets the ENERGY STAR guidelines for energy efficiency
when used with a computer equipped with a Display Power
Management System.
ENERGY STAR
Environmental information
The product you have purchased contains extracted natural resources that have
been used in the manufacturing process. This product may contain substances
known to be hazardous to the environment or to human health.
To prevent releases of harmful substances into the environment and to
maximize the use of our natural resources, Gateway provides the following
information on how you can responsibly recycle or reuse most of the materials
in your “end of life” product.
Waste Electrical and Electronic Equipment (commonly known as
WEEE) should never be disposed of in the municipal waste stream
(residential garbage collection). The “Crossed-Out Waste Bin” label
affixed to this product is your reminder to dispose of your “end of life”
product properly.
Substances such as glass, plastics, and certain chemical compounds are highly
recoverable, recyclable, and reusable. You can do your part for the environment
by following these simple steps:
■ When your electrical or electronic equipment is no longer useful to you,
“take it back” to your local or regional waste collection administration for
recycling.
■ In some cases, your “end of life” product may be “traded in” for credit
towards the purchase of new Gateway equipment. Call Gateway to see if
this program is available in your area.
■ If you need further assistance in recycling, reusing, or trading in your “end
of life” product, you may contact us at the Customer Care number listed
in your product’s user guide and we will be glad to help you with your
effort.
Finally, we suggest that you practice other environmentally friendly actions by
understanding and using the energy-saving features of this product (where
applicable), recycling the inner and outer packaging (including shipping
containers) this product was delivered in, and by disposing of or recycling used
batteries properly.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
With your help, we can reduce the amount of natural resources needed to
produce electrical and electronic equipment, minimize the use of landfills for
the disposal of “end of life” products, and generally improve our quality of life
by ensuring that potentially hazardous substances are not released into the
environment and are disposed of properly.
Notices
Copyright © 2006 Gateway, Inc.
All Rights Reserved
7565 Irvine Center Drive
Irvine, CA 92618 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part
of it may be reproduced or transmitted by any means or in any form, without
prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to
be accurate. However, changes are made periodically. These changes are
incorporated in newer publication editions. Gateway may improve and/or
change products described in this publication at any time. Due to continuing
system improvements, Gateway is not responsible for inaccurate information
which may appear in this manual. For the latest product updates, consult the
resulting from any defect or omission in this manual, even if advised of the
possibility of such damages.
In the interest of continued product development, Gateway reserves the right
to make improvements in this manual and the products it describes at any time,
without notices or obligation.
Trademark Acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered
trademarks of Gateway, Inc. in the U.S. and other countries. SpotShop,
Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside
logo, and Pentium are registered trademarks and MMX is a trademark of Intel
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered
trademarks of Microsoft Corporation. All other product names mentioned
herein are used for identification purposes only, and may be the trademarks or
registered trademarks of their respective companies.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Macrovision statement
If your notebook has a DVD drive and an analog TV Out port, the following
paragraph applies:
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: Safety, Regulatory, and Legal Information
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
PC Card slot
VGA
A
AC adapter
connecting 12
connector
supported 25
D
accessories
purchasing 30
digital camera
CD
USB port
audio
inserting 25
digital video camera
IEEE 1394 port
CD drive
See DVD drive
cellular phone
display
headphone jack
switching 19
Certificate of Authenticity
clicking 22
connecting
double-clicking 22
dragging 22
drives
keyboard 18
types 24
B
battery
bay 27
charging 12
latch 10
connections
DVD
audio
drive 24
DVD drive
identifying 24
installing 35
digital camera
recalibrating 29
recharging 12
replacing 27
digital video camera
locating
using 24
external diskette drive
external speakers
DVD/CD-RW drive
See DVD drive
bays
Firewire
battery 27
DVD RW drive
flash drive
See DVD drive
headphone
i.Link
E
brightness
keyboard
adjusting 19
Ethernet
monitor (VGA)
C
mouse
cable lock
cards
EZ Pad touchpad
See touchpad
printer
scanner
speaker
F
fan
memory card slot
S-Video (TV) out
USB
files
opening 22
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
finding
brightness 20
USB port
moving
pointer 21
MP3 player
multimedia
specifications
Firewire port
folders
opening 22
LCD/CRT 19
navigation 18
Standby 19
Status 19
system 18
Windows 18
G
Gateway
N
Support
network
H
hard drive
networking
L
bay 10
label
labels
latch
installing 38
replacing 38
Num Lock
headphone jack
hot-swapping 26
numeric keypad
using 18
battery 10
LCD panel release
I
O
LCD panel
i.Link port
IEEE 1394 port
indicators
See status indicators
installing
release latch
opening
lock
files 22
LCD panel
notebook
Kensington cable
programs 22
battery 27
keyboard 40
memory 32
M
memory
bay 10
P
PC Card
adding 26
purchasing 30
removing 32
replacing 32
inserting 26
installing 26
slot 26
J
memory card reader
jacks
locating
memory card types supported
See connections
PCMCIA card
See PC Card
PDA
K
Kensington cable lock
microphone jack
Microsoft
lock slot
keyboard
pointer
Certificate of Authenticity
moving 21
model number
modem
cable 14
buttons 18
features 18
locating 11
replacing 40
power
DSL 14
USB port
keys
monitor
port
mouse
arrow 18
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Standby
U
status indicator
upgrading 31
USB port
printer
starting
notebook 15
programs 22
V
inkjet 30
laser 30
USB port
VGA port
video
status indicators
battery charge
S-Video out jack
programs
opening 22
volume
controls 22
location 11
R
RAM
See memory
W
power
Support
Windows
replacing
getting specifications
Suspend 19
key 18
Product Key Code
See installing
right-clicking 22
wireless network
button 19
S-Video (TV) out
jack
system keys
S
locating 18
safety
T
scanner
technical support
USB port
Support
screen objects
television
TV out jack
moving 22
selecting 22
touchpad
buttons 21
clicking 22
security features
Kensington cable lock
setting up
locating 11
programs 22
shortcut menus
accessing 22
shortcuts
right-clicking 22
SO-DIMM
See memory
turning off
sound
controls 22
turning on
notebook 15
speakers
built-in
TV out (S-Video out) jack
jack
specifications
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAN BLADE E/K8 HW REF R0 11/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|