73458
Instructions
Starry Night
Mobile
with Remote
Control
Please keep this
instruction sheet for
future reference,
as it contains important
information.
Adult assembly
is required.
Requires four “D” (LR20)
alkaline batteries for
the mobile and two
“AA” (LR6) alkaline
batteries for the
remote. (Batteries
not included.)
Tool required for
battery installation:
Phillips screwdriver
(not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
Mobile Features
1
6
2
5
3
4
7
1
Star Dome – Projects starry images onto baby’s ceiling.
2
3
Start Button
Light Select Button
– Starts or restarts music and soothing lights.
– Choose star dome light, night light, both lights
or no lights.
4
5
Song Select Button
– Press to choose from different five songs.
Power/Volume Switch - Choose high volume , low volume
or power off
,
.
no sound
6
7
Receiver Dome – Accepts signal from the remote. Dome needs to be
turned so it aligns with the transmitter window on the remote
Night Light – Features softly glowing colors.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Features
Front View
Rear View
5
3
4
2
1
4
®
1
Button - Press to activate the mobile once the mobile has been
turned ON.
2
3
4
5
LED Signal Indicator - Lights when the button is pressed to let you
know the remote has transmitted a signal to the transmitter.
Transmitter Window - Remote transmits a signal to the receiver dome
on the mobile.
Handle - Flips up so you can hang the remote on a door knob. Snaps
around bottom of the remote when not in use.
Battery Compartment - Insert two “AA” alkaline batteries. Please refer to
Battery Installation on page 6. For longer battery life, use alkaline
batteries only.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Battery
Compartment
Battery
Compartment
Mobile Base
Remote
•
Locate the battery compartment door
on the back of the mobile base.
• Locate the battery compartment
door on the back of the remote.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
Hint: If the crib adapter is attached to
the base, loosen the scres in the crib
adapter and remove it first.
• Insert two “AA” (LR6) alkaline
batteries, as indicated inside the
battery compartment.
• Insert four “D” (LR20) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-
ment door and tighten the screws
with a Phillips screwdriver. Do not
over-tighten.
IMPORTANT! Under normal use
conditions, the batteries in the mobile
will require replacement more often
than the batteries in the remote.
When sounds or light become faint or
movement of the mobile is sluggish,
it’s time for an adult to replace the
batteries in the mobile base.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-
ment door and tighten the screw
with a Phillips screwdriver. Do not
over-tighten.
IMPORTANT! If the mobile does not
respond to the remote, it does not
mean that the battery power in the
remote is low. Replace the batteries in
the remote if the LED signal indicator
on the remote is dim when the
button is pressed. If the LED signal
indicator does not light after installing
new batteries in the remote, check the
orientation of the batteries in the
battery compartment to make sure
they are properly installed.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Safety Information
1.5V x 2
“AA” (LR6)
Shown Actual Size
1.5V x 4
“D” (LR20)
Shown Actual Size
+
-
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
•
Remove batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Star Spoke
1
Slot
Tab
Hub
• Locate the three star spokes.
• Insert and “snap” the tabs on the ends of the star spokes into the slots in
the hub, as shown.
2
Soft Toy Spoke
3
8
#4 x / " Washer
Hub
Head Screw
Shown Actual Size
• Locate the three soft toy spokes.
• Place the end of the spoke with the larger hole onto the matching hole on
the hub, as shown.
3
8
• Insert a #4 x / " screw through the spoke and into the hub. Tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other two soft toy spokes.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
3
Soft Toy Spoke
Slot
Soft Toy String
Soft Toy String
• Fit a soft toy string through the slot in the end of a soft toy spoke.
• Pull down gently on the soft toy to secure the string in the soft toy spoke.
• Repeat this procedure to attach the remaining soft toys to the other two
soft toy spokes.
4
Arm
5
8
#6 x / " Screw
Shown Actual Size
Base
Hub
Arm
• Insert and “snap” the arm into the hole in the side of the hub.
• Fit the arm into the slot in the base, as shown.
5
8
• Insert the #6 x / " screw through the arm and into the base. Tighten the
screw with a Phillips screwdriver. Do not over-tighten.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Crib Use
Crib
Adapter
Tighten
Screw
Arm
Base Battery
Compartment
Door
• Position the base so that the battery compartment door is facing you.
• Fit the crib adapter onto the base.
• Tighten the screws in the crib adapter using a Phillips screwdriver.
Do not over-tighten.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Crib Use
Base
Crib Top Rail
Threaded Peg
Clamp
• Fit the mobile base on to the crib top rail so that the threaded peg extends
outside of the crib.
• Fit the clamp onto the threaded peg and turn the clamp clockwise to
secure the base to the crib rail. Do not over-tighten the clamp.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of
other remote controlled equipment, such as televisions and stereos, or use
of other electric or battery powered appliances interfere with operation of
the mobile, do not use both appliances at the same time.
• For best performance between the mobile and the remote, avoid using the
remote in areas of bright light. In bright natural or artificial light, you may
notice loss of range. Move the mobile or otherwise reduce the amount of
light to improve performance.
Mobile Dome
• When using the remote, make sure that the arrow on the mobile’s dome is
pointing towards the transmitter window on the remote. For best results,
the path between the transmitter window on the remote and the dome
on the mobile are in a direct line and free of obstacles. Rotate the
mobile dome so that the arrow points to the area from which you’re
most likely to use the remote. For example, if you’ll most often be using
the remote from the doorway of the nursery, make sure that the arrow on
the mobile dome is pointing towards the doorway and that the path
between the mobile dome and the doorway is free from obstructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Power/Volume Switch
• The switch has four positions: off ; on with low
volume ; on with high volume ; or no sound
(lights only).
• Slide the power/volume switch to the off position
when not in use.
Song Select Button
• Press the button to choose from five different songs.
• Each time you press the song select button, the
mobile switches to the next selection until it returns
back again to the first.
Light Select Button
Press the button to choose from different light modes:
•
-Light the star dome and project starry images on
baby’s ceiling.
-Light the night light with soft glowing colors.
-Light both the star dome and night light.
-Turn lights off.
• Each time you press the light select button, the
mobile switches to the next mode until it returns
back again to the first.
Start Button
• Press the start button to activate music and lights.
• The mobile will play for approximately five minutes.
• To restart the mobile, press the start button again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Dresser-top Use
Threaded Peg
Clamp
• Loosen and remove the clamp from the threaded peg.
• Remove the mobile from the crib.
Crib Adapter
Loosen
Screws
Base
• Loosen the screws in the crib adapter using a Phillips screwdriver.
• Lift and remove the crib adapter.
• Store the crib adapter in a safe place for future crib use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Dresser-top Use
Knob
Loosen Knob
Rotate Arm
Tighten Knob
Knob
Dresser-top Use
• Locate the knob on the arm.
• Turn the knob counter-clockwise to loosen the arm.
• Rotate the arm down as shown.
• Turn the knob clockwise to tighten the arm snugly.
• Place the mobile on a dresser top out of reach of baby.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
Soft Toy Spoke
Soft Toy String
Slot
Soft Toys
• To remove a soft toy, grasp its string and press the knot up through the
opening in the spoke.
• Slide the string through the slot in the spoke.
• Place the soft toys in a pillowcase. Wash them on a gentle cycle in cold
water. Tumble dry the toys on low heat. Do not use bleach.
Mobile
• Wipe the mobile with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the mobile.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
Write to us at:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria
3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
73458f-0920
|