GV-3D1-7950-RH
GeForce™ 7950 GX2 Graphics Accelerator
User's Manual
Rev. 102
12MD-3D17950R-102R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
Copyright
© 2006 GIGABYTE TECHNOLOGYCO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a
commitment to update the information contained herein.
Macrovision corporation product notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
1.1. Features
•
•
•
•
•
•
•
•
Powered by NVIDIA® GeForce™ 7950 GX2 Graphics Processing Unit (GPU)
Supports the newest PCI Express x 16
Integrated with 1GB DDRIII memory
Supports DirectX 9.0c
Supports NVIDIA® SLITM (Scalable Link Interface) technology (Note)
Supports AV / S-Video and HDTV output
Supports D-sub connector (by adapter)
Supports 2 DVI-I connectors
1.2. Minimum system requirements
•
IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz
class processor or higher
•
•
•
•
•
•
One PCI Express x 16 slot
Operating Systems Win® 2000 / Win® XP
64MB system memory
50MB of available disk space for full installation
CD-ROM or DVD-ROM drive
Minimum power supply 350W
(A power supply of 550 watt or above is recommended for an SLI system with the
graphics cards.)
(Note): SLI technology requires a PCI Express motherboard with two x16 physical
connectors. Graphics cards working in an SLI configuration must be with the same model
name (i.e. GV-3D1-7950-RH) and from the same vendor (i.e. GIGABYTE
TECHNOLOGY).
- 3 -
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Hardware Installation
2.1. Board Layout
SLI connector
TV-out
DVI-I Connector
DVI-I Connector
Y
HDTV
Pr
Pb Output
TV-Out
NTSC / PAL TV
AV Output
DVI-I to D-Sub
DVI-I
S-Video Output
Adapter
Connector
DVI-I to D-Sub
DVI-I
Adapter
Connector
VGA Output
Analog LCD Monitor
DVI Output
Digital LCD Monitor
GV-3D1-7950-RH Graphics Accelerator
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some
precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-static
mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
- 5 -
Hardware Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2. Hardware installation
Installing Your graphics card.
Now that you have prepared your computer, you are ready to install your graphics accelerator
card.
To remove the existing graphics card:
1. Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.
2. Remove the computer cover. If necessary,
consult your computer's manual for help in
removing the cover.
3. Remove any existing graphics card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to disable
it on the motherboard. For more information,
please see your computer documentation.
To install your new graphics card:
1. Locate two PCI Express x 16 slots. If
necessary, remove the metal covers from
the slots; then align your graphics card with
the PCI Express x 16 slots, and press it in
firmly until the card is fully seated.
* Please make sure that the gold edge connectors of the graphics card is securely inserted.
GV-3D1-7950-RH Graphics Accelerator
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Replacethescrewtofastenthecardinplace,
and replace the computer cover.
After installing the GV-3D1-7950-RH to your computer, please
remember to connect at lease one power cable on the graphics card
to the power supply connector.
We suggest you to connect both of the two power cables on the
graphics card to the power supply to achieve optimal graphics
performance.
3. Plug the display cable into your graphics
card; then turn on the computer and monitor.
To connect a flat panel directly to your
graphics card, use the DVI-I connector. To
connect a VGA monitor to the DVI-I
connector, plug the DVI-I to D-sub adapter
intotheDVI-Iconnector,thenplugthemonitor
cable into the adapter.
Connect a flat panel
To TV / VCR
To Flat Panel Display
Connect a VGA monitor via DVI-I to D-sub adapter
You are now ready to proceed with the installation of the graphics card driver. Please refer
to next chapter for detailed instructions.
- 7 -
Hardware Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
GIGABYTE Component Video Adapter for Nvidia Graphics Cards (HDTV Cable)
AV Out
HDTV Component
S-Video Out
(Y+Pr+Pb)
Connect to the TV-Out
port on the graphics card.
(1) Connecting HDTV
Connect your HDTV cables to the component video
adapteraccordingtothecorrespondingcolor. (Y=Green,
Pr= Red, Pb= Blue)
(2) Connecting S-Video
If your TV has a S-Video connection, connect the S-
Video cable from your TV to the S-Video Out port on the
adapter.
(3) ConnectingAV Output
If your TV has a Composite video connection, you can
connect the RCA cable from your TV to the AV Out port
on the adapter.
GV-3D1-7950-RH Graphics Accelerator
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How NVIDIA® SLITM (Scalable Link Interface) technology works:
In an SLI configuration, two SLI-ready graphics cards of the same model and the same
manufacturers are connected together via SLI bridge connector in a system that provides
two x 16 PCI Express slots to scale graphics performance. The picture below shows that two
graphics cards are linked in parallel in an SLI configuration.
SLI bridge connector
(provided by motherboard
manufacturer)
Two SLI-ready graphics
cards of the same type.
(Example: GV-NX66T256DP-RH)
- 9 -
Hardware Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Software Installation
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
The installation of Windows® 2000 / Windows® XP drivers is very simple. When you insert the
driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show
up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.
(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics
accelerator.)
3.1. Windows® XP driver and utilities installation
3.1.1. Operating system requirement
•
When loading the graphics card drivers for the system, please make sure your system
has installed DirectX 9.0C or later version.
•
If you install the graphics card drivers for the motherboard, which consist of SIS or VIA
chipsets, please install the appropriate driver program for that motherboard. Or please
contact your motherboard nearest dealer for motherboard driver.
3.1.2. DirectX installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 2000 or
Windows® XP to achieve better 3D performance.
0 Note: For software MPEG support in Windows® 2000 or Windows® XP, you must install
DirectX first. Users who run Windows XP with Service Pack 2 or above do not need to
install DirectX separately.
Step 1. When autorun window show up, click
the Install DirectX 9 item.
GV-3D1-7950-RH Graphics Accelerator
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2. Choose I accept the agreement and click
the "Next" button.
Step 3. Click the "Next" button.
Installingthecomponents.
Step 4. Click "Finish" to restart computer.
Then the DirectX 9 installation is completed.
- 11 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.3. Driver installation
A. New hardware found
After the graphics card is inserted into your computer at the first time, the windows will
automatically detect a new hardware in the system and pop out a "New Hardware Found"
message. The following is the step-by-step installation guide.
Step 1: Found new hardware wizard: Video controller (VGA Compatible)
Click the "Next" button to install the driver. (There
is a driver CD disk that came with your graphics
accelerator, please insert it now.)
Or click the "Cancel" button to install the driver
from AUTORUN window.
Step 2: Found new hardware wizard: Searching and installing
The wizard will search for the driver and install it automatically.
Step 3: Found new hardware wizard: Finish
Click the "Finish" button to finish the installation.
GV-3D1-7950-RH Graphics Accelerator
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Driver installation (Autorun Window)
Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window.
If it does not show up, please run "D:\setup.exe".
Step 2. When autorun window show up,
Step 1. When autorun window show up,
click Install Display Driver item.
click Display Driver item.
Step 3. Click "Next" button.
Windows installings the components.
Step 4. Click "Finish" button to restart
computer. Then the driver installation is
completed.
- 13 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
After installation of the display drivers, you will find a NVIDIA icon on the taskbar's status
area. Click this icon to open the control panel.
Right click the icon.
You can adjust the properties of
the graphics accelerator from
here.
GV-3D1-7950-RH Graphics Accelerator
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.4. Display properties pages
To access Display Properties pages, right-click the GIGABYTE icon on the taskbar and
select Display Properties or right-click on Desktop and then select Properties. The Display
Properties dialog box shows the information of display adapter, color, the range of display
area, and the refresh rate.
Settings (Resolutions and Color depth for Windows)
You may adjust the screen resolution and color quality settings in this dialog box.
You can move the slider to change
the resolution.
You can click the item to change the color depth.
Click the "Advanced" button for adapter and setting.
Display
Matrix
Model
GV-3D1-7950-RH
To access more advanced options, click the
"Advanced" button.
CRT+TV
CRT+DVI
DVI+TV
DVI+DVI
Yes
Yes
Yes
Yes
GeForce 7950 GX2 properties
After pressing the "Advanced" button in Settings, you'll see the Plug and Play Monitor and
NVIDIAGeForce 7950 GX2 Properties dialog box. Click the GeForce 7950 GX2 tab. (You can also
click the Nvidia icon on the taskbar and select Nvidia Display to access the GeForce 7950 GX2
properties page.)
„ This page shows the Adapter, System and
Driver version information.
You can select other properties from the pop-out menu.
- 15 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Adjustment Settings properties
„ Click the arrow icons on the desktop image to adjust the screen
to the desired position.
Display Mode Timing Settings properties
„ Click to select your display’s timing mode:
Auto-Detectisthe"default"setting;itallowsWindowstoreceive
the proper timing information directly from the display itself.
Note: Some older monitors may not support this feature.
•
General Timing Formula (GTF) is a standard used by
most new displays.
•
Discrete Monitor Timing (DMT) is an older standard still
in use on some displays. Enable this option if your display
requires DMT.
•
•
Coordinated Video Timing Standard (CVT) became the
VESA standard on March 2003. CVT supports higher
resolutions better than other timing standards.
Fixed aspect ratio timing forces the displayed image to
retain the aspect ratio of the mode rather than aspect ratio
of the display.
Note: The driver may place black borders around the displayed
image, as needed.
GV-3D1-7950-RH Graphics Accelerator
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Performance and Quality Settings properties
„ The sliders lets to decide whether your application should use
quality or high performance texture.
• Applicationprofiles:Selecttheapplicationprofilefromthelist
of profiles.
• Global driver settings: Select the Settings item and move
the slider below to set the degree of antialiasing to used in
Direct3D and OpenGL applications.
• Antialiasing settings value: allows to set the degree of the
Global Driver Settings.
SLI multi-GPU
„ To enable SLI mode, select the Enable SLI multi-GPU
check box and click Applyafter installation of two
GV-3D1-7950-RH graphics cards on an SLI-capable
motherboard. Then restart your system when prompted.
Only Windows XP operating system supports the SLI mode.
Please do not enable SLI multi-GPU in Windows 2000.
Color Correction properties
„ The Color Correction Properties is used to compensate for
variations in luminance between a source image and its output
on a display device. Adjust the color correction settings to
provide more accurate color reproduction of images (such as
photographs) on your display device. Also, many 3D-
accelerated games may appear too dark to play. Increasing
the brightness and/or the gamma value equally across all
channels makes these games appear brighter and more
playable.
- 17 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Overlay Settings properties
„ The Video Overlay Settings Properties can adjust Overlay
zoom controls and Overlay color controls. There is only one
video overlay, which is only available on the Primary display.
The video overlay controls are automatically activated during
playback of any video file type that supports overlay
adjustments. The "Adjust Colors" button will access "Color
Correction" properties page.
Tools properties
„ TheNVIDIAsettingstaskbarutilityletsyouconvenientlyaccess
various features and presets you've configured in the Display
Properties directly from the Windows taskbar.
• Shortcuttools
The Desktop Manager provides enhanced nView multi-
displayfunctionalityandhelpsyouorganizeyourapplications
for use with multiple displays and desktops.
• Display optimization
Run the Display Optimization Wizard to adjust your
display(s) for optimal viewing and representation of colors.
• Troubleshooting
This option can be used to force detection of an attached TV
set which does not report its presence to the graphics card.
NV Rotate properties
„ The NV Rotate Propertiesis used to rotate the screen. If your
monitor is capable of operating in either Landscape or Portrait
mode, you can adjust the screen by this properties.
• Landscape (0 degree rotation)
• Portrait (90 degree rotation)
• Inverted landscape (180 degree rotation)
• Inverted portrait (270 degree rotation)
GV-3D1-7950-RH Graphics Accelerator
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Resolutions & Refresh Rates properties
„ TheScreen Resolutions & Refresh Rates Properties allows
you to adjust the screen resolution, color quality and monitor
settings(screenrefreshrates).Oryoucancustomizeresolutions
and refresh rates.
Menu Editing properties
„ The Menu Editing Propertiescan remove infrequently used
screens by dragging them from the screen menu to the list
below. Restore screens to the menu by dragging them
individually, or click Restore Defaults.
To begin, select the Enable menu editing check box. To
return to normal navigation mode, do not select the check box.
Control Panel User Interface properties
„ Select the user interface you wish to use:
• Classic NVIDIA Control Panel
• New NVIDIA Control Panel
- 19 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.5. nView properties pages
nView is a set of desktop tools designed to help you be more productive when using your
graphics card. With nView you can set up multiple desktops to work with your applications.
Multiple desktops give you extra desktop areas on which to run your applications so you
won't have to crowd several open application windows on one desktop.
Enable the nView Desktop Manager features:
Right-click on desktop and choose Properties>Settings>Advanced>GeForce 7950 GX2>
DesktopManagement
Click the "Enable" button to turn on all the nView Desktop
Manager features.
Access nView properties page:
To access the nView properties page, you can click the NVIDIA icon on the taskbar and
select nView Properties under nView Destop Manager (Method A). Or right-click on
Desktop, select Properties>Settings>Advanced>GeForce 7950 GX2. Double-click Desktop
Management item on the pop-up menu (Method B).
MethodA:
Method B:
Click the item to start nView Properties.
Double-click Desktop Management to see
more nView properties.
GV-3D1-7950-RH Graphics Accelerator
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
nView Desktop Management properties
„ ThistabcontainsinformationaboutthenViewDesktopManager.
The setup wizard can also be accessed from this tab.
nView Profiles properties
„ This tab contains a record all nView display settings for easy
software setup.
nView Windows properties
„ Thistaballowsyoutocontrol windowanddialogboxplacement
when using multiple monitors.
- 21 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
nView Applications properties
„ ThistaballowsyoutocontrolnViewsettingsdependingdifferent
applications.
nView Desktops properties
„ This tab allows you to create up to 32 unique desktops.
nView User Interface properties
„ This tab allows for customization of the nView user interface.
GV-3D1-7950-RH Graphics Accelerator
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
nView Effects properties
„ This tab provides special windows effects that you can apply
to your applications.
nView Zoom properties
„ This tab provides dynamic zoom functionality on the desktop.
Also enables full screen video playback via the video mirroring
controlbutton.
nView Hot Keys properties
„ This tab lets you perform various actions with shortcut keys or
key combinations.
- 23 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
nView Mouse properties
„ This tab can modify and extend mouse behavior with kinematic
actions.
nView Tools properties
„ ThistabcanimprovenViewfunctionalityformobileanddesktop
users.
GV-3D1-7950-RH Graphics Accelerator
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Windows® 2000 driver installation
With Windows running on your computer, you need to install the graphics card driver to take
advantage of the higher performance, resolutions, and special graphics features of the
graphics card. To ensure you install the latest driver, insert the Installation CD that shipped
with your graphics card.
To install the graphics card driver for Windows® 2000, please insert the Installation CD. Then
the AUTORUN window will show up. Click Install Display Driver item, and follow the
wizard to install the driver.
If Windows® does not show the CD automatically, please run following steps:
1. Click the Start button on the control bar.
2. Select Run.
3. Type the following: D:\SETUP.exe
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
4. Click "OK".
5. Click on "Install Display Drivers" to begin the Installation Wizard.
6. Click "Next".
7. Click "Yes" to the license agreement.
8. Follow the Wizard's on-screen instructions to complete the installation.
Please make sure the Windows® 2000 have installed Windows® 2000
Service Pack (or later) before installing the graphics accelerator driver.
- 25 -
Software Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Troubleshooting Tips
The following troubleshooting tips may help if you experience problems. Contact your dealer
or GBT for more advanced troubleshooting information.
„
„
„
„
Check that the card is seated properly in the PCI Express x 16 slot.
Ensure that the display cable is securely fastened to the card's display connector.
Make sure that the monitor and computer are plugged in and receiving power.
If necessary, disable any built-in graphics capabilities on your motherboard. For
more information, consult your computer's manual or manufacturer.
(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or
to become the secondary display.)
„
„
Make sure you selected the appropriate display device and graphics card when
you installed the graphics driver.
Restart your computer.
Press the F8 key on your keyboard after system starts up. When the Windows
Advanced Options Menu appears, select Safe Mode and press Enter.
After getting into Safe Mode, in Device Manager check whether the driver for the
graphics card is correct.
„
For more assistance, use the Troubleshooting Guide located in the Windows®
Help or contact your computer manufacturer.
If necessary, adjust your monitor's setting by monitor's adjust panel to make the screen
looks focused, crisp, and sharp. (Please refer to the monitor's manual.)
GV-3D1-7950-RH Graphics Accelerator
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Appendix
5.1. How to Reflash the BIOS
1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive
A.
2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart
the computer in MS-DOS mode.)
3. Change the command prompt toA:\>.
4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name]
-s [BIOS file name](example: gvf11 -s nx66t128d.f1) and press Enter.
5. To flash BIOS, at the A:\> prompt, type [BIOS flash utility name] -p [BIOS
file name](example: gvf11 -p nx66t128d.f2) and press Enter.
6. Wait until it's done, then restart your computer.
- 27 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. Resolutions and Color Depth Table (In Windows® XP)
GeForce 7950 GX2 Single Display Standard Modes
Display
Refresh
Color Depth (bpp)
Screen
Rate
8bpp(256 color)
16bpp(65K color)
32bpp(16.7M)
Resolution
320 x 200
320 x 240
400 x 300
480 x 360
512 x 384
(Hz)
Standard mode
High mode
True mode
60~75
60~75
60~75
60~75
60~75
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
X
640 x 400 (16:10) 60~75
640 x 480
720 x 480
720 x 576
800 x 600
848 x 480
60~240
60
50~60
60~240
60~240
960 x 600 (16:10) 60~240
1024 x 768
60~200
240
1088 x 612 (16:9) 60~200
3
X
240
1152 x 864
60~170
200
3
X
1280 x 720 (16:9) 60~150
3
X
170
1280 x 768
1280 x 960
1280 x 1024
1360 x 768
60~150
170
3
X
60~150
170
3
X
60~150
170
3
X
60~150
170
3
X
1600 x 900 (16:9) 60~120
3
X
140~150
1600 x 1024
60~100
120
3
X
To be continued...
GV-3D1-7950-RH Graphics Accelerator
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Refresh
Rate
Color Depth (bpp)
Screen
8bpp(256 color)
16bpp (65K color)
32bpp (16.7M)
Resolution
1600 x 1200
(Hz)
Standard mode
High mode
True mode
60~100
120
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
X
1920 x 1080 (16:9) 30~85
3
X
100
1920 x 1200 (16:10) 60~85
100
3
X
1920 x 1440
2048 x 1536
60~85
60~85
3
3
* This table is for reference only. The actual resolutions supported depend on the monitor you use.
- 29 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. NVIDIA GeForce 7950 GX2 - Motherboard Compatibility List
The following motherboards have been tested and passed NVIDIA's compatibility testing requirements
with the GeForce 7950 GX2 graphics card.(Note)
Manufacturer
ABIT
Model
Chipset
System BIOS
2.4
AA8-DuraMAX
AW8
Intel 925X
ABIT
Intel 955X
1.4
ABIT
AN8 SLI
NVIDIA nForce4 SLI
NVIDIA nForce4 SLI
NVIDIA nForce 570
NVIDIA nForce4 SLI
NVIDIA nForce4 SLI
NVIDIA nForce4
NVIDIA nForce4 Ultra
NVIDIA nForce4 SLI
NVIDIA nForce4 SLI
ATI CrossFire Xpress 3200
VIA K8T890/VT8237R
NVIDIA nForce 590
NVIDIA nForce 570
Intel 945P
1.9
ABIT
KN8 SLI
17
ABIT
KN9 SLI
10
Albatron
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
Biostar
DFI
K8SLI
R1.12
1205
A8N32-SLI Deluxe
A8N5X
0902
A8N-E
1013
A8N-SLI Deluxe
A8N-SLI Premium
A8R32-MVP Deluxe
A8V-E Deluxe
M2N32-SLI DELUXE
M2N-SLI DELUXE
P5LD2
1016
1011.006
0404
1005
0404
112
1103
P5LD2-VM
Intel 945G
0508
P5ND2-SLI
i945 G-M7
NVIDIA nForce4 SLI
Intel 945G
0304
24F
Infinity NF4 SLI
945P-A
NVIDIA nForce4 SLI
Intel 945P
2006/04/10
2.58 10/18/05
1.1d
ECS
ECS
KN1 SLI Lite
nForce4-A939
123-K8-NF47-AX
NVIDIA nForce4 Ultra
NVIDIA nForce4
NVIDIA nForce4 SLI
ECS
1.1g
EVGA
04/11/2006-NF-
CK804-
6A61FJ1AC-00
537F1P34
612W1P19
F5
Foxconn
Foxconn
Gigabyte
Gigabyte
Gigabyte
Gigabyte
Gigabyte
NF4SLI7AA-8EKRS2
C51XEM2AA-8EKRS2H
GA-8I945P-G
NVIDIA nForce4 SLI Intel Ed.
NVIDIA nForce 590
Intel 945P
GA-8I945P PRO
Intel 945P
F5
GA-8N-SLI-Quad Royal
GA-K8N Pro-SLI
NVIDIA nForce4 SLI Intel Ed.
NVIDIA nForce4 SLI
NVIDIA nForce4 SLI
F5
F4
GA-K8N-SLI
F9
GV-3D1-7950-RH Graphics Accelerator
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer
Gigabyte
Gigabyte
Gigabyte
Gigabyte
Gigabyte
Gigabyte
Gigabyte
Intel
Model
Chipset
System BIOS
GA-K8N51GMF
GA-K8N51PVM9-RH
GA-K8NE
NVIDIA nForce 410/GeForce 6100 F7
NVIDIA nForce 430/GeForce 6150 F1
NVIDIA nForce4
FB
GA-K8NF-9
NVIDIA nForce4
F10
GA-K8N-SLI
NVIDIA nForce4 SLI
NVIDIA nForce4 Ultra
NVIDIA nForce4 SLI
Intel 955X
F9
GA-K8NXP-9
GA-K8NXP-SLI
D955XBK
F9
F11
2036
Intel
D975XBX
Intel 975X
1073
Intel
SE7525GP2
Intel E7525
P08
iWill
DK8EW 59102
939GT4-SLI-G
K8N Diamond Plus
K8N Neo3
NVIDIA nForce4 Pro 2200
NVIDIA nForce4 SLI
NVIDIA nForce4 SLI
NVIDIA nForce4
V130
6/24/2006
1.2
Jetway
MSI
MSI
1.5
MSI
K8N Neo4 Platinum v1
K9N-SLI Platinum
P4N Diamond
945P NEO2-F
NVIDIA nForce4 Ultra
NVIDIA nForce 570
NVIDIA nForce4 SLI Intel Edition
Intel 945P
1.D
MSI
1.1
MSI
1.4
MSI
A7176IMS v3.2
12/12/05
1.0B
Supermicro
Tyan
X6DA8
Intel E7525
S2895 D/T
NVIDIA nForce 2200/2050
2895_103k
(Note) For more compatible motherboards, refer to the following website:
- 31 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
GV-3D1-7950-RH Graphics Accelerator
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 33 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
GV-3D1-7950-RH Graphics Accelerator
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|