™
Steam Mop
Max
U S E R ’ S G U I D E
21H6 SERIES
3
Safety Instructions
Product View
Assembly
4
5
6
Special Features
6-8 Operation
9
Maintenance and Care
10 Troubleshooting
10 Consumer Services
11 Replacement Parts
12 Warranty
ug120-4108_21H6_709.indd
1
7/10/09 10:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
SAVE THESE INSTRUCTIONS
should be observed, including the following:
Commercial use of this unit void the manufacturer's
warranty.
Read all instructions before using your Steam mop
max™
GROUNDING INSTRUCTIONS
this appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk of
electrical shock. the cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
WARNING:
to reduce the risk
of fire, electric shock, or injury:
■
Do not direct steam at people, animals, or at
electrical outlets.
Do not expose to rain.
Store indoors.
■
■
■
Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
■
■
Do not leave steam cleaner unattended.
Do not leave the steam cleaner connected to an
electrical outlet when not in use.
Grounded
Outlets
■
■
■
Do not service steam cleaner when it is plugged in.
Do not use with damaged cord or plug.
Do not use steam cleaner if it has been dropped,
damaged, left outdoors or dropped into water,
return it to a service center.
Grounding Pin
■
■
Do not handle steam cleaner with wet hands.
Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners or
edges, or expose cord to heated surfaces.
WARNING:
Improper
connection of the equipment-grounding
conductor can result in a risk of
■
■
Do not unplug by pulling on cord.
electrical shock. Check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not fit
the outlet, have a proper outlet installed
by a qualified electrician. This appliance
is designed for use on a nominal 120-volt
circuit, and has a grounding attachment
plug that looks like the plug in the
drawing above. Make certain that the
appliance is connected to an outlet
having the same configuration as the
plug. No plug adapter should be used with
this appliance.
Do not use appliance in an enclosed space filled
with vapor given off by oil-base paint, paint thinner,
some moth proofing substances, flammable dust,
or other explosive or toxic vapors.
■
■
Do not allow to be used as a toy.
Do not use on leather, wax polished furniture or
floors, synthetic fabrics, velvet or other delicate,
steam-sensitive materials.
■
■
Do not immerse.
Do not use for any purpose other than described in
this User’s Guide.
■
■
Use only manufacturer’s recommended attachments
- use of attachments not provided or sold by BISSeLL
may cause fire, electric shock or injury.
This model is for household uses only.
Never put descaling, aromatic, alcoholic or
detergent products into the steam cleaner, as this may
damage it or make it unsafe for use.
■
■
Unplug by grasping the plug, not the cord.
Close attention is necessary when used by or near
children.
3
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug120-4108_21H6_709.indd
3
7/10/09 10:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Strain Reliever
Handle™
Steam on
Demand Trigger
Quick Release™
Cord Wrap
Power Cord
Carrying Handle
Lower Cord
Wrap
Removable
Water Tank
Water Purification
System
Ready Light
Maneuverable
Swivel head
Mop Pad
Optional Accessories:
Deluxe Mop
Pads - 2 pack
Water Purification
System
Steam Mop Scented
Water-Eucalyptus Mint
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
4
ug120-4108_21H6_709.indd
4
7/10/09 10:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Handle Assembly
Your Steam Mop Max assembles quickly and
easily. The only thing you will need for assembly
Large Screw
is a Phillips head
screwdriver.
Your Steam Mop Max is packaged with the
following items:
Handle Assembly
Lower Body with Water Purification System
360° Swivel Head
Lower Body
Small Screw
Removable Water Tank
1 large Phillips Head Screw
1 small Phillips Head Screw
2 Deluxe Mop Pads
1. Attach lower body to maneuverable swivel
Maneuverable Swivel Head
head.
2. Secure 360° swivel head with small Phillips
head
crew. Tighten until secure.
3. Slide handle assembly down into lower
body until it will go no further.
Removable
Water Tank
2 Deluxe Mop Pads
2
4. Secure the handle by placing the large Phillips
head
screw through the screw opening in
the lower body and into the rear of the handle
assembly. Tighten with screwdriver until
secure.
1
5. Slide water tank onto lower body by lining up
vertical glides and gently sliding tank into place.
Steam Mop Max assembly is now complete.
3
4
5
5
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug120-4108_21H6_709.indd
5
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features
Removable water tank
The water tank is located on the back of the
Steam Mop Max. It can be refilled with water any
time during use. Distilled or demineralized water
may be used in place of tap water.
Do not use chemicals with your Steam Mop Max.
Water purification system
This filter removes minerals and other impurities
from tap water, preventing water deposits
from damaging your Steam Mop Max. It should
be replaced when the bright green grains turn
blue. To maximize performance of the filter,
distilled water may be used.
Tip:
Do not attempt to use
your Steam Mop Max
without water in the tank.
Ready light
The ready light will glow when tap water has
been converted to steam and the Steam Mop
Max is ready to use.
Steam on demand trigger
Press to release steam.
Maneuverable Swivel head
Allows you to clean in tight spaces and under
cabinets.
Deluxe mop pads
Reuseable microfiber mop pad is machine
washable and safe for all hard floor surfaces.
Operation
Getting ready
The mop pad may have already come attached
to the swivel head, if not follow steps 1A and
1B below.
1. Attach mop pad.
A. Set swivel head in mop pad, making
sure toggle is located on the back.
B. Tighten mop pad by pulling on elastic
cord while pressing on toggle.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
6
ug120-4108_21H6_709.indd
6
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Getting ready continued
2. Fill the water tank
1A
2A
1B
A. Remove tank by lifting straight up and away
from unit.
B. Unscrew cap at bottom of water tank and
remove the insert assembly.
2B
C. Fill water tank with water. For best results,
water should be at room temperature.
D. Replace insert assembly and cap, tighten
until snug.
E. Replace water tank by lining up vertical
guides and gently sliding tank into place.
2E
3. Twist the quick release cord wrap clockwise to
unwrap the power cord completely and plug into
a 120-Volt grounded outlet as described on the
Important Safety Instructions, page 3.
4. The ready light will illuminate when the Steam Mop
Max is ready for use.
Before you clean
Thoroughly sweep or vacuum floor prior to cleaning
with the Steam Mop Max.
Cleaning hard floors
Your Steam Mop Max is designed to clean hard flooring
such as ceramic tile, vinyl, laminate, marble, stone and
sealed hard wood floors. Use of your Steam Mop Max on
waxed or some unwaxed floors may result in a dimin-
ished glossiness. The Steam Mop Max is not for use on
unsealed wood floors. For best results test in an incon-
spicuous area or check the care instructions from your
flooring manufacturer.
Cleaning hard floors
Your Steam Mop Max is designed to clean hard flooring
such as ceramic tile, vinyl, laminate, marble, stone and
sealed hard wood floors. Use of your Steam Mop Max on
waxed or some unwaxed floors may result in a dimin-
ished glossiness. The Steam Mop Max is not for use on
unsealed wood floors. For best results test in an incon-
spicuous area or check the care instructions from your
flooring manufacturer.
7
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug120-4108_21H6_709.indd
7
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Cleaning hard floors continued
1. When the ready light illuminates, begin cleaning
by slowly passing over surface while pressing the
steam on demand trigger to emit steam as needed.
WARNING:
Never put descaling,
aromatic, alcoholic, or
detergent products into
the steam cleaner, as
this may damage it or
make it unsafe for use.
2. To sanitize an area of your floor, (attack invisible
germs and bacteria) leave the Steam Mop Max
over area for a minimum 15 seconds, but no
longer than 20 seconds. For larger areas, over-
lap swivel head placement.
3. When the Steam Mop Max stops emitting steam,
simply remove the water tank, refill, and
continue cleaning.
Tip:
During first use, it may
take several seconds
for the Steam Mop Max
to begin steaming. The
water needs to flow
Carpet Refresher Attachment
This accessory is recommended for the
refreshing of carpets. Once the steam mop is
cradled in the carpet refresher attachment, it will
easily glide over the carpet.
through the filter to the
heater. This delay will only
occur during initial use or
when using a new filter.
NOTE: Always be sure a mop pad is in place
before placing in carpet refresher attachment.
Only white mop pads should be used with the
carpet attachment. Do not use carpet attach-
ment on spots or stains, or glide it over the
same spot for longer than 20 seconds.
1. Attach the mop pad to the swivel mop head. As
CAUTION:
Never put descaling,
alcoholic, or deter-
gent products into
the steam cleaner,
as this may damage
it or make it unsafe
for use.
directed in step 1 on page 4.
2. Place the swivel mop head, with mop pad
attached, in the carpet refresher attachment.
Note: that the Steam Mop rests in the car-
pet refresher attachment and may not stay
attached to the swivel mop head. It is meant to
glide over the carpet.
3. Fill the water tank with water. Begin refreshing
your carpet or rug by pushing the Steam Mop
in a forward and backward motion, releasing
steam as you go.
2
4. When you have finished refreshing your carpet
or rug, unplug the steam mop and remove from
the carpet or rug.
NOTE: Move the Steam Mop and carpet
refresher attachment in a continuous motion
until you are finished. This product is not
intended to be used as a carpet cleaner, only a
carpet refresher or deodorizer. Never attempt
to use the Steam Mop on carpet without the
carpet refresher attachment in place. DO NOT
leave the mop in a stationary position.
3
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
8
ug120-4108_21H6_709.indd
8
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
When you're done
CAUTION:
1. Unplug power cord from outlet.
Upright storage of the
Steam Mop Max with a wet
mop pad may result in the
formation of white marks on
your floor. To remove the
white marks, clean area
with vinegar.
2. Carefully remove mop pad from swivel head, as
mop pad and lower assembly will be hot.
3. Any water remaining in the water tank should
be emptied prior to machine storage.
4. Mop pad can be machine washed in hot water.
Tumble dry on low heat or air dry.
5. Wrap power cord around quick release cord
wrap on side of Steam Mop Max.
6. Wipe all surfaces of Steam Mop Max with a soft
cloth. Store upright in a protected, dry area.
NOTE: If steam output is reduced, the nozzle
may be blocked. To remedy, unplug unit,
remove swivel head from lower body and pour
vinegar through center tube of swivel head
“neck”. Clear nozzle by inserting a paper clip
into the brass spray tip located in bottom of
lower body.
Brass Spray Tip
Swivel Head Neck
Replacing the water purification system
If you fill your Steam Mop Max cleaner with normal
tap water, it is essential to check the water purifi-
cation system and replace it when it is no longer
effective. Change the filter when the bright green
grains turn blue. If the filter is not changed at the
appropriate time, calcium deposits will
Tip:
demineralized water
will maximize the
performance of your filter.
Using distilled or
accumulate on the heating element, causing
damage or reduced performance.
Using distilled or demineralized water will maximize
the performance of your filter.
To order a replacement water purification system
refer to the replacement parts section on page 11.
Tip:
Be sure to use only a
BISSELL water filter in
your Steam Mop Max.
9
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug120-4108_21H6_709.indd
9
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Reduced steam or no steam.
Possible Cause
Remedies
1. Water tank empty
1. Fill tank
2. Depleted water filter
3. Blocked steam nozzle
2. Replace filter
3. Refer to NOTE on bottom of page 8
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
monday - Friday
Saturday
8 a.m. — 10 p.m. et
9 a.m. — 8 p.m. et
or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSeLL, have model number of unit available.
please record your model Number: ___________________
please record your purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the
event of a warranty claim. See Warranty on page 12 for details.
Please register your new BISSELL product at
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
10
ug120-4108_21H6_709.indd 10
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts - BISSELL Steam Mop Max
Item
1
Part No.
018-5600
Part Name
Water Filter
2
3
4
5
203-2167
203-2159
603-2046
203-2168
Handle assembly with Screw
Water tank with Cap and Insert
Cap and Insert assembly
Storage Hook with Screws
4
5
3
1
2
Additional Accessories
These items are available for purchase as accessories for your BISSELL Steam Mop:
Item
1
Part No.
3252-a
Part Name
Carpet Refresher attachment with pad
2
3
4
3252-1
3255-H
59V4
eucalyptus mint Natural aroma
Deluxe mop pads - 2 pack
Steam mop Scented Water eucalyptus mint 32 FL oz
2
1
3
4
Earn Rewards Points!
To qualify you for discounts, rebates, and other BISSELL perks.
11
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug120-4108_21H6_709.indd 11
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty - BISSELL Steam Mop Max
this warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover,
please contact BISSeLL Consumer Services by e-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSeLL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSeLL’s option,
free of charge from the date of purchase by the original purchaser, for one year, any defective or
malfunctioning part.
See information below on "If your BISSeLL product should require service".
this warranty applies to product used for personal, and not commercial or rental service. this warranty does not apply
to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by
negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is
not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
contact BISSELL Consumer Services.
Website or E-mail:
Use the “Customer Service” tab.
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE
OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES
EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY
OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR
DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
©2009 BISSeLL Homecare, Inc
Grand Rapids, michigan
all rights reserved. printed in China
part Number 120-4108
Rev 6/09
Visit our website at:
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
12
ug120-4108_21H6_709.indd 12
7/10/09 10:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|