Roksan Audio CD Player MK111 User Guide

K a n d y  
INTEGRATED CD PLAYER  
MkIII  
U S E R M A N U A L  
R O K S A N A U D I O L I M I T E D  
6 NORTHFIELD INDUSTRIAL ESTATE  
BERESFORD AVENUE  
MIDDLESEX HA0 1NW  
ALPERTON  
ENGLAND  
T E L .  
F A X .  
+ 4 4 ( 0 ) 2 0 8 9 0 0 6 8 0 1  
+ 4 4 ( 0 ) 2 0 8 9 0 0 6 8 0 2  
+ 4 4 ( 0 ) 2 0 8 9 0 0 0 7 3 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
K a n d y Integrated CD Player  
Congratulations on your purchase of the ROKSAN Kandy Integrated CD Player. This CD Player is designed and  
manufactured to the highest specification and rigorously tested to reward you many years of listening pleasure.  
Your Kandy CD Player is at the heart of your hi-fi system. Its correct installation, set-up and operation will have a  
profound influence on the sonic performance of the entire hi-fi installation.  
Please read the contents of this manual thoroughly. It will help you to understand your hi-fi equipment better and  
enhance your listening pleasure.  
This manual is divided into the following sections:  
Safety Instructions (Accompanying card)  
Safety Certification  
Introduction  
Cautions  
Installation  
Setup  
Operation  
Remote Control  
Troubleshooting  
Guarantee  
Specifications  
Notes  
UNPACKING  
Included in the packing of your Kandy CD Player you will find:  
One mains lead fitted with the correct mains power plug for your country  
One Kandy MkIII Integrated amplifier / Integrated CD Player Remote Handset and AA batteries (x2)  
One information pack and warranty card  
After removing these items please retain all packing materials. Correct packing is necessary for safe  
transportation of your Kandy CD Player.  
MAINTENANCE  
After disconnecting the CD Player from the mains supply, the cabinet and front panel may be cleaned with a  
lightly dampened soft cloth or chamois leather. Avoid using abrasives or solvents.  
EU DIRECTIVES  
This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and 72/23/EC. The  
standards which have been applied are those which were in force at the time of the introduction of this product.  
This product bears the CE mark.  
This product is compliant to EN 60065.  
This product must be earthed. Please ensure that other equipment connected to it is earthed according to the  
manufacturer’s instructions.  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 3 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
K a n d y Integrated CD Player  
AC MAINS SUPPLY  
Your Kandy CD Player is set to operate from a fixed supply voltage which is marked on a label next to the mains  
input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as  
below:  
230V Products ………………………………….Voltage Range: 220V – 240V  
115V Products ………………………………….Voltage Range: 100V – 120V  
The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the  
unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK  
this is the standard UK13A plug.  
This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it  
cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain  
from your dealer a complete replacement lead.  
Should you move to another area where either the mains voltage or the mains plugs are different from those as  
supplied with your CD Player, please contact the appointed ROKSAN distributor for assistance.  
Please observe correct mains polarity at all times.  
The CD Player mains fuses are located on the rear panel next to the IEC mains connector. They must only be  
replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.  
This product requires connection to earth (ground). The earth wire (in the UK this is colour coded green/yellow)  
of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for  
this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.  
If the equipment is likely to be unused for some time, unplug it from the mains supply.  
GENERAL CAUTIONS  
FCC WARNING  
This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this  
equipment if unauthorised modifications are made.  
INTERFERENCE  
Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no  
guarantee that such interference will not occur in a specific installation. If interference arises (which you can  
determine by switching the unit off and on) you could try to remedy matters by the following:  
Re-orient or re-locate the receiving antenna  
Increase the distance between the CD Player and receiver  
Connect the unit to a different mains circuit from that of the receiver  
Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice  
LOCATION  
Your Kandy CD Player should be located in a well ventilated area and kept away from sources of heat, dust and  
humidity and from direct sunlight.  
The CD Player may be positioned either as a free standing unit or alongside another audio/video product.  
Never place the CD Player on carpet or any surface likely to hinder normal ventilation.  
Never allow liquids or other objects to fall into the unit.  
This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself.  
Unauthorised servicing will void the warranty.  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 4 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
K a n d y Integrated CD Player  
ROKSAN Kandy CD Player- Front Panel View  
1
2
3
4
5
6
7
8
ROKSAN  
Compact Disc Player KD-I MkIII  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Open/Close Button  
Stop Button  
Play/Pause Button  
FL Display  
Drawer Mechanism Door  
Track Back Button  
Track Forward Button  
Play/Pause Button  
ROKSAN Kandy CD Player - Rear Panel View  
1
2
3
4
5
6
1.  
2.  
3.  
4.  
5.  
6.  
Analogue Output (Left & Right)  
Coaxial Digital Output  
AC Mains Power Switch  
Voltage & Fuse Rating Label  
IEC Mains Inlet Socket  
AC Mains Fuseholder  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 5 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
K a n d y Integrated CD Player  
CONNECTING MAINS POWER  
Please refer to the rear panel view on page 5.The moulded IEC connector of the supplied mains lead should be  
plugged into the socket (5) on the rear of the unit first and then plugged into the mains supply. The Mains power  
switch (3) is on the rear panel of the CD Player. This switch is normally left on. If the unit is likely to be  
unattended for a long period, switch it off and unplug the mains lead from the wall.  
SIGNAL CONNECTIONS  
ANALOGUE OUTPUT:  
The Analogue Output (1) uses Gold plated RCA Phono sockets and should be  
connected to the CD or LINE input of your Preamplifier or Amplifier.  
The connection is: Right Channel – Red; Left Channel – White or Black.  
DIGITAL OUTPUT:  
The Digital Output (2) uses a Gold plated RCA Phono socket and should be  
connected to an amplifier with a digital input, or to an outboard Digital to Analogue  
converter (DAC). Do not connect this socket to an optical input.  
IMPORTANT NOTE: For optimum performance it is recommended to use high quality inter-connect cables such  
as ROKSAN HDC-02A High Definition Analogue Cable and HDC-01D High Definition Digital Cable.  
OPERATION  
K a n d y Integrated CD Player  
Please refer to the rear panel view on page 5.  
SWITCHING ON  
The Mains power switch (3) is located on the rear panel of the CD Player. This switch should be left ON for  
normal operation. If unattended for a long period, the Mains power should be switched OFF and the lead  
disconnected from the power supply.  
When switched ON from the rear panel, your Caspian CD Player FL Display will illuminate.  
USING THE CONTROLS  
Please refer to the front panel view on page 5.  
LOADING A DISC  
Press the Open/Close Button (1) once to open the disc loading tray. Carefully load a disc into the tray recess with  
the label side up. Press the button again to close the tray.  
Note: Never load a disc until the drawer has opened fully, or try to close the drawer until you are sure that the  
disc is properly seated in the holder recess.  
Warped discs should never be played.  
The drawer should only be opened using the front panel control. Under no circumstances should you attempt to  
open manually.  
If no disc is inserted or if the disc is damaged or inserted upside down, the CD Player will remain inoperative and  
the display will indicate:  
TRACK  
MIN  
SEC  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 6 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
When a disc has been loaded, your Kandy CD Player will briefly spin the disc while it studies the data encoded  
on it. The disc will then stop and the display will indicate the number of tracks on the disc and the total play time.  
After about 10 seconds the display will revert to:  
TRACK  
MIN  
SEC  
There is a Play/Pause Button (3, 8) on each side of the central drawer mechanism. Their operation is identical  
and interchangeable.  
To commence playing a disc, press Play/Pause Button (3 or 8) once. The disc will play from the beginning.  
To pause the disc whilst it is playing, press the Play/Pause button (3 or 8) a second time. Pressing the button  
again will resume playback from the point at which Pause mode was entered. In Pause mode, the disc continues  
spinning and the laser will still be operational but locked. Please keep the CD Player in Pause mode no longer  
than strictly necessary.  
SELECTING A TRACK  
Press the Track Forward Button (7) to go to the next track on the disc. Pressing the Track Back Button (6) will  
take you to the previous track.  
*****  
When the disc is playing, press the Track Back Button once to take you to the beginning of the current  
track and a second time to take you to the start of the previous track.  
Press the Track Forward Button (7) to take you forward to the start of the next track.  
Once the procedure is complete the disc will commence playing from the selected track.  
When a disc is first loaded you can use these buttons to choose your track. Having done so, press the  
Play/Pause Button and your disc will commence playing from the selected track.  
You may select a track when Pause is engaged. In this case, the disc will revert to Pause after the procedure is  
complete and you will have to press Play/Pause Button to continue playing the disc.  
When a disc reaches the end, it will stop and the display will revert to:  
TRACK  
MIN  
SEC  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 7 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
K a n d y Integrated CD Player  
Your CD Player is supplied with a Kandy MkIII Integrated amplifier / Integrated CD Player Remote Control  
Handset.  
The Remote Control Handset is powered by two 1.5V AA batteries (supplied). When inserting the batteries  
observe the correct polarity.  
The handset duplicates all front panel controls and contains several additional features.  
TAPE  
MODE  
POWER  
SCAN  
SCAN  
1
3
2
TRACK  
TRACK  
4
5
1 SCAN FORWARD  
2 SCAN BACK  
3 TRACK FORWARD  
4 TRACK BACK  
5 PLAY/PAUSE  
INPUT  
INPUT  
6
7
STOP  
REPEAT  
6 REPEAT  
VOLUME  
7 STOP  
8 MEMORY PROGRAMME  
9 DISPLAY (TIME)  
10 NUMERIC KEYS  
8
9
MEMO  
DISP  
1
4
7
2
5
8
3
6
9
10  
0
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 8 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT  
To repeat the disc press the Repeat Button (6). To cancel this function press Repeat Button again.  
DISPLAY  
Pressing the Display Button (9) repeatedly will cycle the display through the following modes:  
Normal  
Display  
Indicates track No. and how  
TRACK  
MIN  
SEC  
long it has been playing.  
First Press  
Display  
Indicates total time  
remaining on the disc.  
MIN  
SEC  
Second Press  
Display  
Indicates time elapsed from  
start of the disc.  
MIN  
SEC  
MEMORY  
Pressing the Memory Button (8) lets you select specific tracks and play them in any order. Programming must be  
performed in STOP mode.  
To programme a sequence:  
1
2
Select a track from the handset, using the Track Back, Track Forward Buttons (4, 3), or via the Numeric  
Keys (10).  
Press Memory Button (8).  
Display  
The word PROGM lights  
and the display shows 01  
PROGM  
TRACK  
for the first programmed  
track.  
3
Repeat this procedure for each track you wish to programme. You may programme a maximum of 20  
tracks. Select a track from the handset, using the Track Back, Track Forward Buttons (4, 3), or via the  
Numeric Keys (10).  
Display  
Select the next desired  
track; the display flashes  
PROGM  
TRACK  
02.  
Display  
Press Memory Button to  
register 02. And so on…  
PROGM  
TRACK  
4
When you have assembled your programme, press the Play Button to start Programme Play.  
TO CANCEL PROGRAMMED TRACKS  
Press the Stop Button on the front panel (2) or Stop Button from the remote handset (7) to clear all programmed  
tracks.  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 9 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
K a n d y Integrated CD Player  
If you suspect that your ROKSAN Kandy CD Player is not operating properly, you should check all the  
connections carefully. Pay particular attention to input and output connections. Phono plugs should be fully  
inserted- a frequent cause of problems is that Phono plug surrounds do not make proper contact. Below are  
some commonly encountered problems with suggestions for possible cure. The list is not exhaustive: If you have  
any unresolved problems, please consult your appointed ROKSAN dealer or distributor.  
SYMPTOM  
LIKELY CAUSE  
SUGGESTED REMEDY  
The disc tray will not close  
Disc not placed properly in tray  
Replace disc properly  
when a disc is inserted  
Disc is warped  
Discard disc  
Disc inserts, display does  
not show the number of  
tracks and playing time  
Disc inserted upside down  
Disc is dirty or scratched  
Condensation on the laser lens  
Dirt on the laser lens  
Re-insert disc  
Clean disc, discard scratched disc  
Let CD player warm up and dry out lens  
Refer to appointed dealer or service centre  
Skipping & mistracking  
Excessive vibration  
Disc is dirty or scratched  
Ensure player is stable and vibration-free  
Clean disc, discard scratched disc  
Programme play  
inoperative  
Programming accidentally erased  
Re-programme memory  
Excessive hum  
Connection loose, cable faulty  
Interconnect or amplifier faulty  
Re-connect plugs, change interconnect  
Change lead, try another line input on amp  
One channel inoperative  
Remote handset operation  
erratic or not working  
Batteries weak or wrongly inserted  
Handset signal path is obstructed  
Replace batteries, observe polarity  
Remove obstruction, move handset  
Handset transmission angle too wide Operate handset in front of CD Player  
Room lighting/sunlight excessive  
Darken room  
GUARANTEE  
K a n d y Integrated CD Player  
There are no user-serviceable parts inside your Kandy CD Player. If a fault should develop, refer any servicing to  
your appointed ROKSAN dealer, distributor or ROKSAN approved service agent.  
Your ROKSAN Kandy CD Player is guaranteed against any defect in materials and workmanship for a period of  
two years from the date of purchase.  
This guarantee only becomes effective if the warranty card is validated by the ROKSAN retailer from whom the  
equipment was purchased and returned to ROKSAN within 28 days of purchase.  
This guarantee excludes:  
1. Damage caused due to accident, misuse, neglect and incorrect installation, adjustment or repair.  
2. Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised  
distributor for the purposes of repair or inspection.  
Carriage costs to ROKSAN shall be borne by the consignor.  
All claims under this guarantee must be made through an authorised ROKSAN retailer.  
If equipment returned for repair to ROKSAN is found on inspection to comply with the product specification  
ROKSAN reserves the right to make a charge for examination and return carriage.  
Unauthorised servicing will void this guarantee.  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 10 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
K a n d y Integrated CD Player  
Operating System  
Frequency Response  
Harmonic Distortion  
S/N Ratio (IHF-A Wtd.)  
Wow & Flutter  
CD digital audio system  
20Hz – 20kHz ± 0.3dB  
< 0.004% @ 1kHz  
100 dB  
Quartz precision  
100 dB @ 1kHz  
2Vrms  
Channel Separation  
Output Voltage  
Digital Output  
Gold Plated RCA 0.5 Vp-p  
CIRC  
Error Correction  
Sampling Frequency  
D/A Conversion  
44.1 kHz  
Dedicated D/A PCB (TD1305T BCC-DAC2)  
(Bitstream continuous calibration DAC)  
Resolution  
Oscillation  
Crystal  
18 bits  
3rd Overtone Oscillation  
Super precision, custom made  
Power Supply  
high performance low noise toroidal transformers  
7 fully regulated power rails  
Power Source  
100V – 120V 50Hz / 60Hz  
220V – 240V 50Hz / 60Hz  
Power Consumption  
Dimension  
< 15 W  
432 x 380 x 90 (W x D x H) mm  
432 x 380 x 102 (including feet)  
Weight  
9Kg  
NOTES  
K a n d y Integrated CD Player  
Kandy CD Player MkIII  
Purchase Date  
Serial Number: …………………………  
Year .……… Month …….. Day ……..  
ROKSAN Retailer  
Name:  
…………………………………  
Location: ………………………………  
Please keep a record for future reference  
Roksan Audio ltd  
Kandy Integrated CD Player MkIII User Manual  
CLASSIFICATION: General Use  
Version 1.00  
All specifications are liable to change without notice. E&OE  
Page 11 of 11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games 73011 User Guide
Raritan Engineering Indoor Furnishings Compact II User Guide
Regency Indoor Fireplace 510 994 User Guide
Roland Stereo Amplifier MOBILE CUBE User Guide
Rosen Entertainment Systems Car Video System R6400V User Guide
Ryobi Blower RY09051 User Guide
Samson Musical Instrument MDR8 User Guide
Samsung Flat Panel Television LA26R7 User Guide
Samsung Printer 2550 User Guide
Sanyo Battery Charger CR17335E R User Guide