Operating Instructions
Excella Series
G 2670 SC
To prevent accidents
and machine damage
read these instructions
before
UV
installation or use.
M.-Nr. 06 696 120
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Delay Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Settings J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Leaving the "Settings J menu". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Problems water intake/drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Clean the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Connection to the water supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
When using your dishwasher, follow
basic precautions, including the
following:
Electrical Safety
Before installation, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
The manufacturer cannot be held
responsible for damage or injury
caused by improper use of this
appliance.
Do not use an extension cord to
connect this appliance to
electricity. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Be certain your appliance is
properly installed and grounded by
a qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
Keep these operating instructions in
a safe place and pass them on to
any future user.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
, WARNING - Fire hazard
Do not cover or crush the plug of
The dishwasher must be installed
and connected in compliance with
the installation instructions.
the appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
plug which could cause overheating.
Installation and repair work should
be performed by a Miele
authorized service technician. Work by
unqualified persons could be
This dishwasher should only be
installed under a continuous
dangerous and may void the warranty.
Do not install or use a damaged
counter top secured to adjacent
dishwasher. A damaged appliance cabinetry.
is dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
Do not install this dishwasher
beneath a cooking surface, oven or
any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely
and kept out of the reach of children.
Danger of suffocation!
When installing the dishwasher
under a counter top and removing
This equipment is not designed for the toekick, a build-under toekick must
maritime use or for use in mobile
installations such as recreational
be installed. Use the respective
installation kit. Danger of injuries.
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Do not cut the intake hose or
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Department with specific requirements.
Only connect the dishwasher to the
mains when all installation and
plumbing work is complete.
It is recommended that the
dishwasher only be connected to
the mains with the plug (no
hard-wiring). The outlet must be
accessible at all times after installation
to disconnect the dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Only use detergents and rinse aids
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
To reduce the risk of injury, do not
allow children to play in, on or near
the dishwasher.
Do not inhale or swallow
detergents. Dishwasher detergents
contain irritant and corrosive
Only use the dishwasher if all
panels are properly in place.
Do not tamper
with the controls.
ingredients. They can cause burning in
the mouth and throat if swallowed, or
inhibit breathing. Consult a doctor
immediately if detergent has been
swallowed or inhaled.
Do not damage, sit or stand on the
door or baskets of the dishwasher.
Close the door when not in use.
Do not drink water from the
dishwasher! Harmful residues
could be present.
Under certain conditions, hydrogen
gas may be produced in a hot
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
Do not fill the rinse aid reservoir or
salt container with detergent. It will
destroy the rinse aid compartment and
period, turn on all hot water faucets and water softener.
let water flow from each for several
If the power cord is damaged it
minutes before using the dishwasher.
This will release any accumulated
hydrogen gas. Do not smoke or use an
open flame during this time.
must only be replaced by a Miele
Service technician with a genuine Miele
power cord.
Be sure that all items placed in the
dishwasher are "dishwasher safe".
For items not labeled, check the
manufacturer’s recommendations.
Disposal of an appliance
If the appliance is removed from its
installation site and will not be
used, remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
When loading tableware, place
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
SAVE THESE
INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray (depending on model)
c Upper basket
g Filter combination
h Data plate
i Optical interface
j Rinse aid reservoir
d Middle spray arm
e Air inlet for drying
k Dual compartment detergent
(depending on model)
dispenser
f Lower spray arm
l Salt container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
a Selection buttons
e K button (Information)
To display more info about the
displayed menu
To select a menu point from this
display, to change the displayed
value (+/-) or to browse between
menus.
f g On button with indicator
To turn the dishwasher on
b Display
g o Off button
See the following pages for more
information.
To turn the dishwasher off
h Technical Service interface
Allows a service technician to check
and update the machine when
applicable.
c +C (Clear) button
To switch back to the previous menu
level or to discard a selected setting.
d d Delay Start button with indicator
i Optical interface
To show the current wash cycle
status when the door is closed
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Display function
The following can be selected in the
display
A bullet in the display next to a button
shows, that a function can be selected
with this button.
– the wash program
– the options
The arrows on the right side in the
display show, that more selections or
text follow and can be displayed with
the respective button.
– the start time
– the settings J menu
To confirm these messages or settings
touch OK and the next menu or another
menu level will appear.
During a running program the display
shows
– the program name
– the current time of day
– the program sequence
– the approximate remaining time
– faults and messages
The "Settings J" menu allows you to
adjust the dishwasher to your
individual needs. See "Settings" for
more information.
To save energy the display turns off 10
minutes after a button is pressed.
To turn the display on again, press any
button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption and
the gentlest washing of china and
crystal, connect the dishwasher to a
cold water source.
^ For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
^ If the dishwasher is connected to hot
water, select "Energy Saver" when
washing light to normally soiled
dishware. The water will not be
heated, therefore the dishes may be
more wet at the end of this program
than when using other programs.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid.
^ When using powder or gel detergent
reduce the amount to 2/3 when
washing a small load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads select "Short".
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into position.
^ Pull the handle to open the door.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
continue.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Welcome screen
^ Turn the dishwasher on g.
A Welcome screen shows when the washer is turned on for
the first time.
Language setting
The display changes automatically to the language setting.
The selected language is marked with a L check.
} deutsch
B
e
Sprache F
} english (GB)
OK }
^ Select the desired language and confirm with OK.
Time of day setting
The display will then change automatically to the time of day
setting.
} +
12 : 00
} -
Please set the time of day
OK }
^ Set the hour with +/- and confirm with OK. Set the minutes
and confirm.
The settings will be saved after the first wash program has
completed.
After confirming the minutes, a summary of the language and
time settings are shown. The messages Refill salt and Refill
rinse aid may show.
^ Confirm with "OK" and the display will change to the main
menu.
} Normal
Main menu
} Pots + Pans
r
The dishwasher can now be used or turned off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
Checking the water hardness
The water hardness measured by the
sensor can be displayed.
See "Settings J - Water hardness".
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
External water softener
If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, the water
hadness must still be set in the
dishwasher.
To achieve good cleaning results the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4°d
(4 gr/gal [US]), the water should be
softened. This takes place
^ Set the dishwasher to the water
hardness of the external water
softener. If you don't know the value,
set the dishwasher water hardness to
8°d (8 gr/gal [US]). See Settings J,
External water softener.
automatically in the unit’s integrated
water softener.
The water softener sets automatically to
the local water hardness.
If the hardness of your local water
supply is constantly lower than 4°d
(4 gr/gal [US]), you do not need to
add water softener salt.
The message to refill salt will turn off
automatically.
For best results use salt when using
3 in 1 tabs (these tabs contain
detergent, rinse aid and water softener
salt). When selecting the "3 in 1"
detergent setting, the salt dosage is
reduced to 1/3 - 1/4 of the normal
amount.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt container
,Inadvertently filling the salt
container with dishwashing
detergent will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Remove the lower basket and
unscrew the salt container lid.
^ Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
4.5 lbs (2 kg) of salt. As it is filled,
water will run out.
When opening the salt container
water will run out. Open the
container only to refill salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ If the dishwasher will not be used
immediately, run the "Short" program.
This will remove any traces of salt
from inside the wash cabinet.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Salt refill message
^ When the display shows k Refill
salt, refill the salt container after the
program has finished.
^ Confirm with OK.
The message will clear from the display.
After the container has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is started. The Refill salt
message will show again during this
process. Confirm again with OK.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Adding rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dispensed.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
When using "2 in 1" or "3 in 1"
detergents rinse aid is not needed.
"2 in 1" detergents contain detergent
and rinse aid. "3 in 1" detergents
contain detergent, rinse aid and
water softener salt.
^ Press the button in the direction of
the arrow until the flap springs open.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
When the Refill rinse aid message first
comes on, there will be enough rinse
aid left for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
If the "2 in 1" or "3 in 1" function is
selected, the Refill rinse aid will not
come on.
See "Settings J - Detergent".
^ Confirm with OK.
^ Pour liquid rinse aid into the reservoir
until it its visible on the surface of the
screen.
The indicator light will go out.
The rinse aid reservoir holds approx.
3.7 oz (110 ml) of liquid.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
To optimize the wash result, the rinse
aid dosage can be adjusted. See
"Settings J - Rinse aid".
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage,
tall, narrow and hollow items,
i.e. vases or champagne glasses,
should be placed in the center of the
basket rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Split cutlery tray
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the
holders. Spoons should be placed in
the opposite direction with the handles
between the holders.
The upper spray arm must not be
blocked by tall cutlery items.
The inserts of the cutlery tray can be
removed.
Single inserts can be removed to make
room for tall items in the upper basket.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Removable spike insert
The spike insert can be removed to
create more space for larger items,
e.g. a saucepan.
,For safety reasons only use the
dishwasher with the upper and lower
basket inserted.
Exception: The programs "Large
items normal" and "Large items
soiled" are designed for use without
the upper basket.
Removing an insert a:
^ To remove an insert, gently pull up on
the handle.
Inserting an insert b:
^ Load the upper basket with small,
lightweight or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
^ Slide the hitches of the insert under
the vertical struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjustable cup racks
Coffee bar
^ Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
(depending on model)
Glasses can be leaned against the
coffee bar for a secure stand.
The height of the cup rack can be
adjusted in two levels.
^ The bar can also be used to separate
two rows of glasses.
^ Pull the cup rack upwards and let it
engage at the desired height.
To stack wide items, flip the bar to the
right.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Glassware rail
(depending on model)
The glassware rail is designed for a
secure stand of tall glasses and
stemmed glassware.
^ Flip the bar down to lean tall glasses
on it.
If necessary take out a part of the
cutlery tray to make room for tall
glasses.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
The upper basket can be raised or
lowered to accommodate tall items.
For example: If the upper basket is in
its highest position a plate with a
diameter of 12 3/16" (31 cm) can be fit in
the lower basket.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
^ Slide out the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Comfort inserts
PlateGuard Plus with StemGuard
The comfort inserts are designed for
cups, glasses, plates, bowls, pots, etc.
^ To insert tall items, raise the cup rest.
^ Lean or hang stemmed glassware
such as wine or champagne glasses
in the cut outs of the cup rest.
Removing an insert a:
^ To remove an insert, gently pull up on
the handle.
Inserting an insert b:
^ Insert the long comfort insert on the
left and the short one in the rear right.
^ Slide the hitches of the insert under
the vertical struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable spike insert with
StemGuard
Vase/Bottle holder
The vase/bottle holder, e.g. for vases
and baby bottles, can be inserted into
the lower basket as shown in the
illustration.
Removing:
^ Push the insert down, a and at the
same time push the latch towards the
basket, b.
If placed anywhere else, water will not
reach all surfaces. The bottle will not be
properly cleaned.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or Miele. Depending on model some accessories come standard with
the machine.
Glassware insert GGO
To wash long stemmed glassware
attaches to the upper basket
Cappuccinatore insert GCEO
Multi-function basket GMFO
Tall glassware insert GGU
To wash the parts of the
Cappuccinatore
To wash saucers, baby bottles and
small items
To wash a large number of glasses,
attaches to the lower basket
Large diameter plate insert GTLU 35
To wash plates with a diameter
up to 14",
attaches to the lower basket
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging. See "Settings - Detergent"
for more information on detergent
usage.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
dishwasher.
Detergent tabs are not recommended
for use with the program "Short". The
tabs may not dissolve completely.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to compartment II and
close the flap.
^ To open, press the latch on the
detergent dispenser. The flap will
spring open.
^ If a Pre-rinse is desired, and available
for your chosen program, add
1 teaspoon (5 ml) of detergent to
compartment I.
The flap is always open at the end of a
program.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
^ Open the water supply, if it is closed.
^ Open the door.
^ Make sure the spray arms can rotate freely.
^ Turn the dishwasher on g.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See "Settings J - Memory".
} Normal
Main menu
} Pots + Pans
r
Selecting a program
Choose your program according to the type of load and
soiling.
The "Program guide" describes the programs and using.
Information about the selected program can be displayed by
pressing the K button.
^ Select the desired program.
The display changes to the program menu.
Sensor Wash
1:32 h
12:00
} Options
Start }
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre-
Main Interim Final Drying
rinse wash rinse rinse
1 2
1 2
Normal
For normally soiled dishware with dried on food
Run-time 131 min
X X
X
X
X
X
X
X
X
Pots +
Pans
For normally soiled pots and pans with dried
on food, and heavily soiled dishware,
120% detergent recommended
Run-time 129 min
X
X
China +
Crystal
For temperature sensitive glassware and lightly
soiled dishware, 50% detergent recommended;
sensor controlled GlassCare program
Run-time 100 min
as re-
quired
X
X
X as
required
X
X
X
Short
"Quick program" for lightly soiled dishware, e.g.
party dishware or to remove salt traces from the
wash cabinet after refilling salt, includes sensor
controlled GlassCare; not suitable for detergent
tabs
X
Run-time 30 min
Sensor
Wash
Sensor controlled program
for normally soiled dishware
Run-time 123 min
as re-
quired
X
X
X as
required
X
X
X
X
Economy For normally soiled dishware, energy saving
program with a long soaking time and a low
temperature; includes sensor controlled
GlassCare
X
Run-time 95 min
Heavy Soil For heavily soiled dishware with dried starchy
X
X
X
X
X
X
X
X
X
food
Run-time 120 min
Energy
Saver
The water intake temperature must be a minimum X X
of 115°F (45°C);
for light to normally soiled dishware
Run-time 74 min
Rinse +
Hold
To rinse dishes when a complete program is not
needed.
X
Run-time 13 min
Water
Saver
For light to normally soiled dishware without
dried food; water saving program
Run-time 87 min
X
X
X
X
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre-
Main Interim Final Drying
rinse
wash
rinse
rinse
1
X
2
Starch
For dishware with dried on starchy food;
120% detergent recommended
Run-time 148 min
X
X
X
X
X
X
X
X
X
X
Cheese
For dishware with dried on cheese;
120% detergent recommended
Run-time 150 min
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Sani Wash
Plastics
To sanitize dishware, e.g. baby bottles,
cutting boards and preparation dishware
Run-time 122 min
X
To gently clean dishwasher safe plastics
and plastic toys
Run-time 115 min
X
X
X
Large items
soiled
For extra large, heat-resistant items
e.g. large vases
Run-time 103 min
Large items
normal
For extra large items sensitive to high
temperatures e.g. large plastics
Run-time 98 min
Glassware no To wash glassware without detergent
rinse aid
and rinse aid; rinse cycle with warm water
Run-time 50 min
Glassware
cold
For a quick cleaning of glassware for
direct reuse; use without detergent and
rinse aid
Run-time 17 min
Plate Warming For plate warming; use without detergent
X
and rinse aid
Run-time 12 min
Usage:
Electric: 0.01 - 1.3 kWh
Water:
1.06 - 6.6 gal (4 - 25 l)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Selecting Options
Options can be added to the selected program.
^ Select Options.
The display shows the available options for the selected
program.
Available options:
Pre-rinse:
– For easily removable soiling
Soak:
– To soak stubborn soiling.
When using powder detergent, fill approx. 1 teaspoon (5 g)
of detergent into detergent compartment I.
Extended drying:
– To enhance drying of odd shaped dishware and plastic
items.
} § Extended drying
Options
OK }
^ Select the desired options and confirm with OK.
The selected options are marked with a L check.
^ To deselect the selected options, press the respective
button again.
When finished customizing the program, confirm with OK.
The display changes back to the program menu.
The program menu shows Options selected.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
You can now select the detergent used. Time display
Available selections are: Powder, Gel,
"2 in 1" and "3 in 1".
See "Settings J - Detergent".
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time shows in the time
display.
Starting a program
^ Select Start.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
The display shows Close the door.
To select another program or to add
options, select Back and cancel the
program with Cancellation.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
^ Close the door.
The optical interface lights to indicate
that a program is running.
The time values in the program guide
correspond to the program running
times with standard loads and
temperatures.
Cancel a program only in the first
5 minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
Each time a program is run the
electronic adjusts the program running
time according to the water intake
temperature and load size.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
At the end of a program
Interrupting a program
At the end of a program the optical
A program is interrupted as soon as the
control light flashes slowly with the door door is opened. If the door is closed,
closed.
the program will continue from where it
was interrupted.
The optical function light goes out one
hour after the end of a program.
,Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
At the end of a program the display
shows Program finished.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
^ Open the door.
^ Turn the dishwasher off o.
The dishwasher continues to use
electricity until turned off with the o
button.
^ If the dishwasher is not used for a
longer period of time,
e.g. vacationing, turn off the water
supply.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Changing a program
If the detergent flap is already open, do not change the
program.
If a program has already started and you wish to change it:
^ Open the door.
Sensor Wash
Main wash
1:32 h
12:00
Cancellation }
^ Select Cancellation and confirm with OK.
The program is canceled.
Sensor Wash
12:00
Program finished
Main menu }
^ Select Main menu.
The display changes to the main menu.
^ Select the desired program.
^ Select Start.
^ Close the door.
The optical control lights. The program starts.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional functions
Delay Start
The starting time of a program can be delayed. The start time
can be delayed between 15 minutes and 24 hours. The start
can be delayed in 15-minute-increments.
When using the "Delay Start" function, make sure that the
detergent compartment is dry before adding detergent.
Wipe dry with a cloth if necessary. Otherwise the
detergent could stick together and not completely rinse
out.
Liquid detergent should not be used when selecting
"Delay Start", the detergent could leak.
^ Open the door.
^ Turn the dishwasher on g.
The indicator g lights.
^ Select the desired program.
^ Select "Delay Start d".
The display shows the current time of day and the last
selected Start time, The program end time is also shown.
The indicator d lights.
} +
Start time 1:00 pm
End at 2:32 pm
12:00
} -
OK }
^ Select the desired Start time with the +/- buttons. Holding
the button will automatically increase or decrease the time.
The end time will be automatically adjusted.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional functions
^ Confirm with OK.
The display changes to the program menu.
^ Select Start.
^ Close the door.
The program starts automatically at the selected time.
The indicator d goes out.
Starting a program before the delay start has elapsed:
A program can be started before the delay start time has
elapsed. Proceed as follows:
^ Open the door.
^ Select Cancel and confirm with OK.
The d indicator lights.
Sensor Wash
12:00
Program finished
Main menu }
^ Select Main menu.
^ Select the desired program.
^ Select Start.
^ Close the door.
The optical control lights. The program starts.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
The "Settings J" menu allows you to adjust standard settings
Opening the Settings J menu
^ Turn the dishwasher on by pressing the g button.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See "Settings J - Memory". Switch to the main
menu by pressing +C (Clear).
} Plate Warming
Main menu
} Settings
F
r
^ Select Settings J.
The display changes into the menu "Settings J".
} Language
F
Settings
} Time of day
r
^ Select the desired setting.
The selected options in the submenus are marked with a L
check.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Language J
Time of day
The display contents can be shown in
different languages.
This selection allows the clock to be
shown as 24 or 12 hours. The clock can
also be set from here.
The displayed language can be
changed by the submenu
"Language J".
Setting the clock format
^ Select Format.
^ Select the desired language and
confirm with OK.
^ Select the desired clock format and
confirm with OK.
The flag behind the word "Language J"
serves as a guide when an unfamiliar
language is selected.
Set the time of day
In this case select the respective menu
with a flag until the submenu
Language J shows.
^ Select Set manually.
^ Set the hour with +/- and confirm
with OK. Set the minutes and confirm.
After confirming the minutes with OK
the display changes back to the
previous menu. To switch back to
"Settings J", select +C (Clear).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Detergent
2 in 1 tabs
To achieve the best results the used
detergent can be set on your
dishwasher. The selection allows
"Powder", "Gel", "2 in 1" and "3 in 1"
tabs. The program cycle sequence will
be adjusted for the selected detergent.
Depending on the program the
The function "2 in 1" adjusts the
program cycle to the use of "2 in 1"
detergent products (detergent with
rinse aid). The rinse aid dosage and the
rinse aid refill message are deactivated.
3 in 1 tabs
program running time may increase.
The function "3 in 1" adjusts the
program cycle to the use of "3 in 1"
detergent products (detergent with
Powder
When using powder detergent, salt and rinse aid and water softener salt). The
rinse aid must be added for best
results. See "Filling the salt container"
and "Rinse aid". The rinse aid refill
message is activated.
rinse aid dosage and rinse aid refill
messages are deactivated. The salt
usage for the water softener will be
reduced to 1/3 - 1/4 of the normal
amount.
Gel
Do not use this extra feature:
When using gel detergent, salt and
rinse aid should be added for best
results. See "Filling the salt container"
and "Rinse aid". The rinse aid refill
message is activated.
– when using "2 in 1" detergents
(detergent with rinse aid).
– if your tab water has a water
hardness of over 21 °d (22 gr/gal
[US]). See also the information from
the detergent manufacturer.
The cleaning and drying
performance of these detergent
products vary.
The detergent selection is set by
default to powder detergent.
^ Select the detergent used and
confirm with OK.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Water hardness
Rinse aid
The dishwasher is equipped with a
sensor softener, which automatically
detects the hardness of your tap water.
After plumbing the dishwasher and
finishing a program, e.g. "Rinse &
Hold", the water hardness is displayed
in the menu "Water hardness".
For best results, the rinse aid dosage
can be adjusted.
The dosage can be set in steps from 0
and 6 ml.
The dosage is set by default to 3 ml of
rinse aid per program.
^ Use a higher setting if spots appear
on dry glassware.
^ Touch OK to change back to
"Settings J".
^ Use a lower setting if streaking
appears on dishes or glasses.
External water softener
^ Select the desired rinse aid dosage
with the +/- controls and confirm with
OK.
If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, the water
hadness must still be set in the
dishwasher to the water hardness from
your water softener unit.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
If you don't know the value, set the
dishwasher water hardness to 8°d
(8 gr/gal [US]).
^ Set the dishwasher to the water
hardness of the external water
softener and confirm with OK.
The filter check message is set by
default to 40 cycles.
^ Select the desired interval and
confirm with OK.
If the dishwasher is not longer
connected to an external water
softener, set the setting to Auto.
Adjusting the "Sensor Wash"
program
The "Sensor Wash" program can be
adjusted to clean stubborn but normal
soiling.
^ Select Yes to activate this function
and confirm with OK.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Reorganize program list
The order of the programs in the program list can be
reorganized. The two most frequently used programs can be
saved to the first two positions.
} Sensor Wash
B
e
} Cancel
Select program for position 1
Continue }
^ Select with e the program which you would like to save to
the first position of the main menu. Confirm the selection
with the button next to the program.
^ Confirm with Continue.
^ Repeat with the second program.
The selected programs are shown summarized.
To change a program position, select Back until you reach the
respective program position.
^ When finished reorganizing the program list, confirm with
Finished.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Save options
Temperature
Additional options can be selected for
some programs, e.g. extended drying.
See "Use - Selecting options".
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
The temperatures are shown in
°C/Celsius by default.
Save options allows to save the
selected options for future use of the
program.
^ Select the desired temperature unit
and confirm with OK.
This function is turned off by default.
^ Select the desired setting and
confirm with OK.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Buzzer
Buzzer volume
When the buzzer is activated, a tone
Two buzzer volumes can be selected or
sounds at the end of a program and if a the buzzer can be deselected.
fault occurs.
Off
The buzzer is turned on by default.
The buzzer tone at the end of a
program is turned off.
Buzzer at the end of a program
Soft
The buzzer at the end of a program
The tone sounds in a soft volume.
Loud
sounds five times in intervals with a
brief break in between. The buzzer
sounds up to one hour if the
The tone sounds in a loud volume.
dishwasher is not turned off.
^ Select the desired volume or
deactivate the buzzer.
Buzzer in case of a fault
The buzzer for a fault sounds
^ Confirm with OK.
continuously. The buzzer sounds for up
to two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be turned
off.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Keypad tone
Memory
A tone will sound when a button is
pressed.
The memory function allows you to save
the last selected program.
The button tone is turned on by default. When turning the dishwasher off and on
again after a program has finished or
^ Select the desired option and confirm
when opening and closing the door, the
with OK.
last selected program is displayed
instead of the main menu.
Brightness
The function is turned on by default.
The display brightness can be adjusted
^ Select the desired option and confirm
in 17 levels.
with OK.
The contrast is set to level 8 by default.
^ Select the desired brightness and
confirm with OK.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings J
Dealer
Factory default
All settings can be reset to the factory
default.
Demo modes are only for
showrooms.
^ Confirm the message Reset to
factory default? with OK.
The dishwasher has three demo
programs for showrooms.
^ Confirm the information All settings
are reset to factory default with
OK.
The programs "Demo mode" and
"Endless demo mode" show the use
and the function range of the
dishwasher.
Leaving the "Settings J menu"
–
–
–
Demo mode:
To leave the "Settings J" press the +C
control and return to the main menu.
The program is started by pressing
any button. It runs once and must be
started again.
Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
Turning the demo mode on
^ Select the desired option and confirm
with OK.
^ Confirm the message
Activate demo mode? with OK.
^ Touch any button to start the selected
demo mode.
^ To cancel the demo mode, press any
button again and confirm with OK.
Turning the demo mode off
^ Select Off to deactivate the demo
mode and confirm with OK.
^ Confirm the message
Deactivate demo mode? with OK.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
Possible fault
Solution
The program does not
start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher is not
turned on.
Press g and select a
program.
No program is selected. Select the desired
program.
The dishwasher stops
during a program.
The fuse has tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The optic indicator is
not visible when a
program has started.
The reflector was not
properly installed.
Install the reflector
properly, see Installation
sheet.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
The optical interface
flashes fast, the buzzer
sounds or the display
shows the fault:
Technical fault
There may be a
technical fault.
– Turn the dishwasher off
Call Technical Service
o.
After a few seconds:
– Turn the dishwasher on.
– Select the desired
program.
– Close the door.
If the problem persists, call
Technical Service.
Fault Waterproof F70
The waterproof system – Turn off the water supply.
has activated.
– Call Miele Technical
Service.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems water intake/drain
Issue
Possible fault
Solution
The optical interface
flashes fast, the buzzer
sounds and the display
shows the fault:
Close the door and open
The water supply is
closed.
Open the water supply all
the way.
the water supply.
Fault water intake FXX
Before fixing the fault:
– Turn the dishwasher off
o.
Fault F12/F13:
– Open the water supply all
Fault in the water intake.
the way.
– Check and clean the
water intake filter, see
"User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
The optical interface
flashes fast.
The program "Energy temperature of 115°F
Saver" displays the
fault:
The intake water does
not have a minimum
– Restart the program.
– If the fault is displayed
again, use a different
program.
(45°C). See "Plumbing -
Connection to the water
Water intake temp. too supply".
low
The optical interface
flashes fast, the
buzzer sounds and the
display shows:
Drain fault FXX
Before fixing the fault:
– Turn the dishwasher off o.
– Clean the triple filter.
Fault F11:
Fault in the water drain.
There might be water in
the wash cabinet.
– Clean the drain pump and
the non-return valve.
See "User Maintenance
Instructions" for more
information on the above.
– Remove any kinks in the
drain hose.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Issue
Possible fault
Solution
The display remains
off.
The display has gone
into "Standby" mode to The display turns on again.
save energy.
Press a button.
The buzzer sounds
during the program
and the display
shows:
The salt container lid
was not screwed on
properly.
– Close the salt container lid.
If the salt container lid opened
during a running program,
you should also:
Close the salt container
– Turn the dishwasher off and
lid
on again with the o button.
– Restart the program.
The display shows the The middle or lower
Open the dishwasher door
following:
Middle spray arm
spray arm is blocked by and rearrange items blocking
dishware.
the spray arms.
– Turn the dishwasher off o.
Then:
blocked
The spray arm jets of
the middle or lower
spray arm are clogged.
or
Lower spray arm blocked
– Clean the spray arms. See
"User Maintenance
Instructions".
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Detergent is left in the The dispenser was damp Dry the dispenser before
dispenser at the end when detergent was
adding detergent.
of a program.
added.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
This is not a fault! It is the The moisture will evaporate
interior walls are still normal operating mode of after a short time.
wet after a program
has finished.
the drying system.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
o.
The triple filter in the wash Clean the triple filter. See
cabinet is clogged.
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
the "User Maintenance
Instructions".
The drain hose is kinked.
Remove any kinks from the
drain hose.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Issue
Possible fault
Solution
There is a knocking
noise in the wash
cabinet.
The spray arm is hitting an Interrupt the program,
item in the basket.
rearrange items blocking
the spray arms.
There is a rattling
noise in the wash
cabinet.
Items are not secure in the Interrupt the program and
wash cabinet.
rearrange loose pieces.
There is a knocking
noise in the water
pipes.
This may be caused by
the installation or the
diameter of the pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Issue
Possible fault
Solution
The dishes are not The dishes were not loaded See "Loading the
clean.
correctly.
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Stubborn but normal soiling Use the function "Adjust
(e.g. tee).
Sensor Wash". See
"Settings J - Adjust Sensor
Wash".
Not enough detergent was
dispensed.
Use more detergent, see
"Adding detergent".
The spray arms are blocked. Turn the spray arm and
rearrange the dishes if
necessary.
The triple filter is clogged or Clean the filter and insert it
not correctly inserted. The
spray arm jets might be
clogged.
correctly, see "User
Maintenance Instructions".
The drain pump or the
Clean the drain pump and
non-return valve is blocked. the non-return valve, see
Wash water will run back into maintenance instructions.
the wash cabinet.
Glasses and
The rinse aid dosage is set Reduce the dosage, see
cutlery show
too high.
"Before using for the first
time".
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and cutlery too low or the rinse aid
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
are spotted?
reservoir is empty.
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
"2 in 1" or "3 in 1" products
Set the detergent type to
were used. These products "Powder" and insert rinse
have a low drying effect.
aid. See "Settings J -
Detergent".
The detergent "2 in 1" or
"3 in 1" is set, but another
product was used.
Select the detergent setting
to the detergent used. See
"Settings J - Detergent".
White residue is
visible on cutlery
and dishes,
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
clouding occurs on
glassware and film
can be wiped off.
The salt container is empty. Increase the dosage, see
"Before using for the first
time".
The salt container lid was
not screwed on properly.
Reseat and screw the lid on
firmly.
Unsuitable "2 in 1" or "3 in 1" Use a different detergent.
products were used.
Try using normal tabs or
normal powder detergent.
The automatic water
softener unit is defective.
Contact Miele Technical
Service.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Glasses are
discolored and the
Detergent ingredients have Use a different detergent.
been deposited on the
film cannot be wiped glasses.
off.
Glasses are dull and Glasses are not dishwasher There is no remedy. Only
discolored and have safe.
a film which cannot
be wiped off.
wash dishwasher safe
glasses in the dishwasher.
Tea or lipstick stains The wash temperature of
Select a program with a
have not been
completely removed. too low.
The detergent has a low
the selected program was higher temperature. i.e.
Normal, Heavy Soil.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
vegetables may be the
cause. Not enough
Use more detergent, see
"Adding detergent".
detergent was used to
break down natural dyes.
Discoloration is permanent.
There are rust stains The affected items are not
on cutlery. corrosion resistant.
There is no remedy. Only
wash dishwasher safe
cutlery in the dishwasher.
No "Rinse" program was run Start the "Short" program
after refilling salt. Salt
residuals got in the wash
cycle.
without a load after refilling
salt.
The salt container lid was
not screwed on properly.
Reseat and screw the lid on
firmly.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
^ Please quote the model type and
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Indicator reflector
Check and clean your dishwasher
regularly (approx. every 4-6
months). This will help avoid faults
and problems.
The reflector of the optical indicator is
located in the steam deflector beneath
the counter top.
To clean the reflector, remove it from the
plastic bracket.
,Abrasive cleaning agents, glass
cleaning agents, all-purpose
cleaners, thinner or ammonium
cleaners should not be used on the
dishwasher. They will damage the
surface.
^ Open the door and remove the
reflector from the bracket.
^ Clean the reflector and the plastic
bracket with a damp cloth.
^ Return the reflector to the bracket.
Wash cabinet
Control panel
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
^ Clean the control panel with a damp
cloth.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
dealer, Miele or online at
Exterior
^ Use a conditioner suitable for your
kitchen cabinetry.
^ Clean wood with a damp cloth and
wipe dry.
Door and the door seal
^ Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner or with
dishwashing detergent and warm
water.
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
^ To help prevent resoiling, a
conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
Clean the filters
The triple filter system in the base of the ^ Turn off the dishwasher before
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
cleaning.
,The machine must not be used
without all the filters in place!
Check and clean the filter system every
4-6 months or whenever a foreign
object is trapped. The level of soiling
and time it takes before the filters need
cleaning will vary depending on
household.
The display shows Filter check after
40 wash cycles (default setting).
^ Turn the handle counterclockwise to
release the triple filter system, a.
The filter check frequency can be set
between 30 to 60 cycles.
See "Settings J - Filter check".
^ Remove the triple filter from the
machine. Clean any solid particles
and rinse under running water. Scrub
with a nylon brush if necessary.
^ Check the triple filter.
^ Clean the triple filter if necessary.
^ Confirm with OK.
The display changes to the main menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the underside of the filter, the
flap must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
^ Lock the filter by turning the handle
the flap b.
clockwise.
^ Rinse under running water.
,The triple filter system must be
inserted and locked. Large particles
could get in the circulation system
and cause a blockage.
^ Close the flap so that the clip
engages.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Press the top spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check
that they rotate freely.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
,The plastic housing of the water
connection contains electrical
wiring. Do not submerge the
housing in liquid.
Do not cut the intake hose or
submerge it in liquid.
^ Carefully remove the rubber seal.
Installing an in-line water filter
^ Remove the filter using needle nose
pliers and rinse it under running
water.
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
filters can be purchased from Miele.
^ Reinsert the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
Cleaning the filter
^ Turn off the dishwasher and pull the
plug.
^ Slowly turn on the water supply and
test for leaks.
^ Turn off the water supply.
^ Unscrew the intake hose.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a jug or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
^ Tilt the locking clamp to the side a.
clicks into place!
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
For installation of the dishwasher
please refer to the Installation Sheet
supplied with these instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Help to protect the environment
Disposal of the packing
material
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for
unauthorized work.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
V 1-800-565-6435
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water supply – The water inlet hose comes
equipped with a 3/4" female hose
thread connector. This can be
directly connected to a water supply
with 3/4" MHT (male hose thread
ends).
,Do not drink water from the
dishwasher!
– The dishwasher can heat its own
water to the temperature required by
the wash program. This allows for
connection of the machine to either a
hot or cold water source. For lowest
energy consumption connect the
dishwasher to a cold water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source. All programs use hot
water in the rinse cycles.
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
If the water pressure is lower, the
display shows Water intake
see "Frequently asked questions".
– To use the "Energy Saver" program, a
hot water connection of minimum
115°F / 45°C and maximum 140°F /
60°C (water intake temperature) is
necessary.
The higher the water intake
temperature, the better the cleaning
and drying results.
– The inlet hose is approximately 5 ft.
(1.5m) long. A 5 ft. (1.5m) extension
hose is available from the Technical
Service Parts Department at the
phone number listed on the back of
this manual.
,Do not cut the intake hose. It
contains electrical wiring. If the hose
is cut, the dishwasher will not work.
There will be a water leak and you
could be injured. If the hose is too
long, coil it neatly and place it
behind the machine.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
Venting the drainage system
– The machine comes equipped with a If the dishwasher drain hose is
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
^ Open the dishwasher door and
remove the lower basket.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
^ Pull the lower spray arm firmly
upwards to remove.
– If the hose is to be directly fitted to
the drainage outlet on site, use the
supplied hose clip.
– The hose can be installed to the left
or right side.
– The existing drain pipe for the drain
hose is designed for various hose
diameters. The drain pipe must be
shortened if the drain pipe extends
too far into the drain hose. The drain
hose could get clogged.
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
– The drain hose must not be
shortened.
– Make sure the hose is installed
without kinking, pressure or being
pulled.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Alterations reserved/4906
G 2670 Vi /
M.-Nr. 06 696 120 / 02
en - US
Download from Www.Somanuals.com. All Manuals Search And Download.
|