JBL Speaker MRX 500 User Manual

M R X 5 1 2 M  
M R X 5 1 5  
User’s Guide  
M R X 5 2 5  
M R X 5 1 8 S  
M R X 5 2 8 S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Before You Begin - Important Information  
2
3-5  
5-6  
7-9  
10  
Product Specifications  
Recommended Amplifiers, Infrasonic Filters, DuraFlexand Pole Mounting  
MRX Series Block Diagram  
Basic Configuration  
Sub/Sat Configuration  
11  
Speaker Cables  
12  
JBL Limited Warranty  
13  
JBL Professional Contacts  
14  
Explanation of Graphic Symbols  
Important Safety Instructions  
The exclamation point within an equilateral triangle is  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings  
intended to alert the users to the presence of impor-  
tant operating and maintenance (servicing) instruc-  
tions in the literature accompanying the product.  
4. Follow all instructions  
The lightning flash with the arrowhead symbol, within  
an equilateral triangle, is to alert the user to the  
presence of insulated “dangerous voltage” within the  
products enclosure that may be of sufficient magni-  
tude to constitute a risk of electric shock to humans.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install in accordance with  
manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus that produce heat.  
CAUTION: TO REDUCE THE RISK OF  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN!  
ELECTRONIC SHOCK - DO NOT REMOVE  
COVER. NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug. A polarized plug has two blades with one wider than  
the other. A grounding-type has two blades and a third grounding  
prong. The wide blade or the third prong is provided for your  
safety. If the provided plug does not fit your outlet, consult a  
electrician for replacement of the obsolete outlet.  
DO NOT EXPOSE  
TO RAIN OR MOISTURE!  
ATTENTION: POUR EVITER LES RISQUES DE  
CHOC ELECTRIQUE, NE PAS ENLEVER LE  
COUVERCLE. AUCUN ENTRETIEN DE PIECES  
INTERIEURES PAR LUSAGER. CONFIER  
LENTRETIEN AU PERSONNEL QUALIFIE. AVIS:  
POUR EVITER LES RISQUES D’INCENDIE OU  
D’ELECTROCUTION, N’EXPOSEZ PAS CET  
ARTICLE A LA PLUIE OU A LHUMIDITE.  
ATTENTION  
RISQUE DE CHOC ÉLECTRIQUE  
NE PAS ENLEVER!  
NE PAS EXPOSER Á  
LA PLUIE NI Á L'HUMIDITÉ!  
10. Protect the power cord from being walked on or pinched,  
particularly at plugs, convenience receptacles, and the point where  
they exit the apparatus.  
11. Only use attachments / accessories specified by the manufacturer.  
12. Use only with a cart, stand, bracket, or table  
specified by the manufacturer or sold with the apparatus. When a  
cart is used, use caution when moving the cart / apparatus combi-  
nation to avoid injury from tip-over.  
The IEC fuse symbol pictured at the left represents  
an approved user replaceable fuse. When replacing  
a fuse, make sure to replace with only the correct  
type and fuse rating.  
13. Unplug this apparatus during lightning storms or when un-used for  
long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when a apparatus has been damaged in any way, such as  
power-cord or plug is damaged, liquid has been spilled, or objects  
have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
15. To reduce the risk of fire or electric shock, do not expose this  
apparatus to rain or moisture.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
SPECIFICATIONS  
MRX512M - 12¨, two-way, bass-reflex, utility / monitor speaker  
Frequency Range (-10 dB):  
Frequency Response (±3 dB):  
Coverage Pattern:  
Crossover Mode:  
Crossover Frequency:  
Power Rating:  
(Continuous / Program / Peak)  
Maximum SPL:  
System Sensitivity (1w @ 1m):  
LF Driver:  
HF Driver:  
Nominal Impedance:  
Enclosure:  
Suspension/Mounting:  
Transport:  
60 Hz - 20 kHz  
90 Hz - 20 kHz  
70º x 70º nominal  
Passive  
1.7 kHz  
400 W / 800 W / 1600 W, 2 hrs1  
350 W / 700 W / 1400 W, 100 hrs1  
123 dB SPL continuous (129 dB SPL peak)2  
97 dB SPL  
1 x JBL 262H 305 mm (12 in) Differential Drive® woofer  
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver  
8 ohms  
Symmetrical stage monitor, 15/18 mm, plywood.  
Dual-angle (0° or -10°), 35 mm pole socket  
Integrated handle / input cup  
Finish:  
Black DuraFlex™ finish  
Grille:  
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing.  
Neutrik® Speakon® NL-4 (x2), one on each end  
645 mm x 380 mm x 345 mm (25.25 in x 15.0 in x 13.5 in)  
14.9 kg (33 lb)  
SS2-BK: Tripod speaker stand  
SS3-BK: Satellite speaker pole  
MRX518S  
MRX528S  
MRX525  
MRX515  
MRX512M  
Input Connectors:  
Dimensions (H x W x D):  
Net Weight:  
The MRX500 speakers covered by this manual are not intended for fixed installation in outdoor or high moisture  
environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts  
and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct  
sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term  
exposure to intense ultra-violet (UV) light.  
Optional Accessories:  
1 IEC standard, full bandwidth pink noise with 6 dB crest factor for specified period  
2 Calculated based on power rating and sensitivity  
MRX500 speakers can generate considerable energy. When placed on a slippery surface such as polished wood  
or linoleum, the speaker may move due to its acoustical energy output. Precautions should be taken to assure  
that the speaker does not fall off a stage or table on which it is placed.  
MRX515 - 15¨ two-way, bass-reflex  
Frequency Range (-10 dB):  
Frequency Response (±3 dB):  
Coverage Pattern:  
Crossover Mode:  
Crossover Frequency:  
Power Rating :  
(Continuous / Program / Peak)  
Maximum SPL²:  
System Sensitivity (1w @ 1m):  
LF Driver:  
HF Driver:  
Nominal Impedance:  
Enclosure:  
Suspension/Mounting:  
Transport:  
Finish:  
52 Hz - 20 kHz  
65 Hz - 20 kHz  
70º x 70º nominal  
Passive  
Stand mounting safety precautions  
Some MRX500 models include a 35 mm receptacle cup to allow mounting on tripod stands or on a pole over  
subwoofers. When using stands or poles, be sure to observe the following precautions:  
1.7 kHz  
400 W / 800 W / 1600 W, 2 hrs1  
Check the stand or pole specification to be certain the device is designed to support the weight of the  
speaker. Observe all safety precautions specified by the manufacturer.  
350 W / 700 W / 1400 W, 100 hrs1  
124 dB SPL continuous (130 dB SPL peak)2  
98 dB SPL  
Always verify that the stand (or subwoofer / pole) is placed on a flat, level, and stable surface and be sure to  
fully extend the legs of tripod type stands. Position the stand so that the legs do not present a trip hazard.  
Route cables so that performers, production crew, and audience will not trip and topple the speakers over.  
Inspect the stand (or pole and associated hardware) before each use and do not use equipment with worn,  
damaged, or missing parts.  
1 x JBL 265H 380 mm (15 in) Differential Drive® woofer  
1 x JBL 2408H 37.5 mm (1.5 in) annular poltmer diaphragm, neodymium compression driver  
8 ohms  
Trapezoidal, 15/18 mm, plywood  
Dual-angle (0° or -10°) 35 mm pole socket  
2 x die-cast handles with backing cup  
Black DuraFlex™ finish  
Powder coated, black, 16-gauge perforated steel with acoustically transparent black screen backing.  
Neutrik® Speakon® NL-4 (x2)  
700 mm x 435 mm x 470 mm (27.25 in x 17.5 in x 18.5 in)  
19.5 kg (43 lb)  
SS2-BK: Tripod speaker stand  
Do not attempt to place more than one MRX500 speaker on a stand or pole.  
Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e. sand  
bags) on the base of the stand to improve stability. Avoid attaching banners or similar items to any part of a  
speaker system. Such attachments could act as a sail and topple the system.  
Grille:  
Input Connectors:  
Dimensions (H x W x D):  
Net Weight:  
Unless you are confident that you can handle the weight of the speaker, ask another person to help you get  
it onto the tripod stand or pole.  
Optional Accessories:  
SS3-BK: Satellite speaker stand  
Hearing damage, prolonged exposure to excessive SPL  
1 IEC standard, full bandwidth pink noise with 6 dB crest factor for specified period  
2 Calculated based on power rating and sensitivity.  
MRX500 loudspeakers are easily capable of generating sound pressure levels (SPL) sufficient to cause perma-  
nent hearing damage to performers, production crew and audience members. Caution should be taken to avoid  
prolonged exposure to SPL in excess of 90 dB.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
SPECIFICATIONS  
MRX525 - Dual 15¨, two-way, bass-reflex  
MRX518S - 18¨ bass-reflex subwoofer  
Frequency Range (-10 dB):  
Frequency Response (±3 dB):  
Coverage Pattern:  
Crossover Mode:  
Crossover Frequency:  
Power Rating:  
(Continuous / Program / Peak)  
Maximum SPL:  
System Sensitivity (1w @ 1m):  
LF Driver:  
40 Hz - 20 kHz  
57 Hz - 20 kHz  
70º x 70º nominal  
Passive  
Frequency Range (-10 dB):  
Frequency Response (±3 dB):  
Input Connection Modes:  
Recommended Crossover Frequencies:  
Power Rating :  
(Continuous / Program / Peak)  
Maximum SPL:  
System Sensitivity (1w @ 1m):  
LF Driver:  
40 Hz - 200 Hz  
45 Hz - 200 Hz  
Internally configurable, +1/-1, +2/-2  
80-120 Hz, 24-48 dB/octave HPF  
500 W / 1000 W / 2000 W, 2 hrs1  
400 W / 800 W / 1600 W, 100 hrs1  
127 dB SPL continuous (133 dB SPL peak)2  
94 dB SPL, 100 dB SPL2  
1 x JBL 2044G 457 mm (18 in) woofer  
4 ohms  
Top mounted 35 mm socket for optional SS3-BK pole  
Rectangular, 18 mm, plywood  
1.8 kHz  
800 W / 1600 W / 3200 W, 2 hrs1  
700 W / 1400 W / 2800 W, 100 hrs1  
129 dB SPL continuous (135 dB SPL peak)2  
100 dB SPL  
2 x JBL 265H 380 mm (15 in) Differential Drive® woofers  
Nominal Impedance:  
Mounting:  
Enclosure:  
HF Driver:  
Nominal Impedance:  
Enclosure:  
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver  
4 ohms  
Trapezoidal, 15/18 mm, plywood  
Finish:  
Black DuraFlex™ finish  
Transport:  
Finish:  
2 x die-cast handles with backing cup  
Black DuraFlex™ finish  
Grille:  
Input Connectors:  
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing.  
Neutrik® Speakon® NL-4 (x2)  
Grille:  
Powder coated, black, 16-gauge perforated steel with acoustically transparent black screen  
backing.  
Dimensions (H x W x D):  
Net Weight:  
560 mm x 535 mm x 700 mm (22 in x 21 in x 27.5 in)  
32.5 kg (72 lb)  
Input Connectors:  
Dimensions (H x W x D):  
Net Weight:  
Neutrik® Speakon® NL-4 (x2)  
1240 mm x 535 mm x 460 mm; (48.75 in x 21.0 in x 18.0 in)  
38.2 kg (84 lb)  
Optional Accessories:  
SS3-BK; Satellite speaker pole  
1 40 Hz to 400 Hz pink noise with 6 dB crest factor for specified period  
2 Calculated on half space condition  
1 IEC standard, full bandwidth pink noise with 6 dB crest factor for specified period  
2 Calculated based on power rating and sensitivity  
MRX528S - Dual 18¨ bass-reflex subwoofer  
Recommended Amplifier Power  
Frequency Range (-10 dB):  
Frequency Response (±3 dB):  
Input Connection Modes:  
Recommended Crossover Frequencies:  
Power Rating:  
(Continuous / Program / Peak)  
Maximum SPL:  
System Sensitivity (1w @ 1m):  
LF Driver:  
35 Hz - 250 Hz  
40 Hz - 250 Hz  
Recommended Amplifier  
Infrasonic Filter  
Settings  
Power  
Internally configurable, +1/-1 or +2/-2  
80-120 Hz, 24-48 dB/octave  
1000 W / 2000 W / 4000 W, 2 hrs1  
800 W / 1600 W / 3200 W, 100 hrs1  
133 dB SPL continuous (139 dB SPL peak)2  
97 dB SPL; 103 dB SPL2  
2 x JBL 2044H 457 mm (18 in) woofers  
4 ohms  
Rectangular, 18 mm, birch plywood  
Black DuraFlex™ finish  
Model  
Full-Range / Parallel  
HPF 24dB/octave  
MRX512M  
MRX515  
800 to 1,600W@8  
800 to 1,600W@8Ω  
1,600 to 3,200W@4Ω  
1,000 to 2,000W@4Ω  
2,000 to 4,000W@4Ω  
63 Hz  
50 Hz  
40 Hz  
31 Hz  
31 Hz  
MRX525  
MRX518S  
MRX528S  
Nominal Impedance:  
Enclosure:  
Finish:  
Grille:  
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen  
backing.  
Infrasonic Filter Settings  
Input Connectors:  
Dimensions (H x W x D):  
Net Weight:  
Neutrik® Speakon® NL-4 (x2)  
1095 mm x 535 mm x 700 mm (43 in x 21 in x 27.5 in)  
55 kg (121 lb)  
It is a good practice to use a High Pass Filter (HPF) to prevent frequencies below the system tuning fre-  
quency from reaching the speaker. Inputting these frequencies to the speaker will not result in any appre-  
ciable acoustic output but will put needless mechanical stress on the woofer and reduce available amplifier  
headroom. A High Pass Filter will protect your MRX500 system from excess infrasonic energy with little, if  
any loss of significant program content. Refer to the above chart for infrasonic filter settings.  
1 40 Hz to 400 Hz pink noise with 6 dB crest factor for specified period  
2 Calculated on half space condition  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MRX500 SERIES BLOCK DIAGRAMS  
MRX512M  
DuraFlex™ Finish  
The DuraFlex finish used on your MRX500 series speakers is one of the most rugged finishes ever applied to a  
speaker. However, all speaker finishes are subject to damage. Should the DuraFlex finish require repair, a touch-  
up kit (Part Number 16677) is available from JBL Professional Parts.  
Single Box On Pole Coverage  
 
 
 
�  
 
The dual angle pole socket on the MRX512M and MRX515 provides flexibility in aiming the speaker. As a gen-  
eral rule, the speaker should be positioned so that the audience cannot see the top or bottom panels of the  
speaker. When using stands or poles, be sure to observe the following precautions:  
 
 
 
 
• Check the stand or pole specification to be certain the device is designed to support the weight of the  
speaker. Observe all safety precautions specified by the manufacturer.  
• Be certain that the surface on which the system is to be stackedis flat, stable and solid.  
• Route cables so that performers, production crew and audience will not trip and topple the speakers.  
• Inspect the stand (or pole and assorted hardware) before each use and do not use equipment with  
worn, damaged or missing parts.  
• Always be cautious when deploying the system outdoors. Unexpected winds may topple a system. It  
may be necessary to place additional weight (i.e. sandbags) on the base of the stand to improve  
stability. Avoid attaching banners or similar items to any part of the speaker system. Such attachments  
could act as a sail and topple the system.  
• Unless you are confident that you can handle the weight of the speaker, ask another person to help  
you get it onto the stand or pole.  
MRX500  
 
 
 
��  
 
 
�  
 
 
 
�  
�  
 
 
���  
�  
�  
MRX515  
���  
�  
�  
 
 
 
 
�  
 
�  
 
 
 
 
 
 
 
��  
  
 
 
 
 
�  
�  
 
 
MRX500  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
MRX500 SERIES BLOCK DIAGRAMS  
MRX500 SERIES BLOCK DIAGRAMS  
MRX518S  
MRX528S  
���  
�  
�  
 
NL4 ±1  
+
JBL PROFESSIONAL  
Northridge, CA USA  
Made in USA  
 
Serial No.  
1+  
LOW  
FREQ 1  
NL4 ±1  
+
-
MRX528S  
-
1-  
1+  
LOW  
FREQ 1  
 
NL4 ±2  
2+  
1-  
2-  
IN / THRU 4  
NL4 ±2  
2+  
1+  
1-  
2-  
+
-
LOW  
FREQ 2  
2+  
1+  
1-  
2-  
MRX500  
2+  
2-  
MRX500  
MRX525  
JBL PROFESSIONAL  
Northridge, CA USA  
Made in USA  
Serial No.  
-
1+  
MRX525  
HPF  
HIGH  
FREQ  
1-  
NL4  
IN / THRU  
+
+
2+  
2-  
IN / THRU  
LOW  
FREQ  
-
PASSIVE  
±1 IN: 4   
±2 N/C  
1+  
1-  
LPF  
NL4  
IN / THRU  
2+  
2-  
LOW  
FREQ  
+
-
MRX500  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONFIGURATION  
SUB/SAT WIRING  
���  
�  
�  
���  
�  
�  
 
 
�  
�  
 
 
��  
 
 
��  
 
 
MRX500  
MRX500  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker Cables  
JBL LIMITED WARRANTY  
The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five  
years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date  
of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original  
purchase.  
Who Is Protected by This Warranty?  
Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has  
been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL prod-  
ucts purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local  
JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty  
service is required.  
What does the JBL Warranty cover?  
Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following  
are not covered: Damage caused by accident, misuse, abuse, product modification or neglect; damage occur-  
ring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual;  
damage resulting from the performance of repairs by someone not authorized by JBL; claims based upon any  
misrepresentations by the seller; any JBL product on which the serial number has been defaced, modified or  
removed.  
Who Pays for What?  
JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the  
original shipping cartons because a charge will be made if replacement cartons are requested. Payment of ship-  
ping charges is discussed in the next section of this warranty.  
How to Obtain Warranty Performance  
If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service  
Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818/893-8411). We may  
direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair. Either way,  
you'll need to present the original bill of sale to establish the date of purchase. Please do not ship your JBL  
product to the factory without prior authorization. If transportation of your JBL product presents any unusual dif-  
ficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible  
for transporting your product for repair or arranging for its transportation and for payment of any initial shipping  
charges. However, we will pay the return shipping charges if repairs are covered by the warranty.  
Minimum Wire Size for 0.5 dB Loss  
Limitation of Implied Warranties  
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.  
EXCLUSION OF CERTAIN DAMAGES  
JBL'S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE  
PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME  
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT  
ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS  
AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,  
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JBL PROFESSIONAL CONTACTS  
Notes  
Mailing Address:  
Outside the USA:  
JBL Professional  
Contact the JBL Professional Distributor in your area. A  
8500 Balboa Blvd.  
Northridge, CA 91329  
complete list of JBL Professional international distributors is  
Shipping Address:  
Product Registration:  
JBL Professional  
8370 Balboa Blvd., Dock D  
Northridge, CA 91329  
(Do not return product to this address without  
first obtaining prior authorization from JBL)  
Customer Service:  
Monday through Friday  
8:00am - 5:00pm  
Pacific Coast Time In the U.S.A.  
(800) 8JBLPRO (800.852.5776)  
On the World Wide Web:  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
Notes  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Electric Pressure Cooker KD3G11 G User Manual
JBL Home Theater System SB300 User Manual
JVC Portable CD Player LVT1977 002B User Manual
JVC VCR LPT0711 001B User Manual
Kathrein Car Amplifier VWS2551 User Manual
Kathrein Satellite TV System UFS 640si User Manual
Kenwood MP3 Player HD20GA7 User Manual
KitchenAid Refrigerator W10379133A User Manual
Kompernass Clock Radio KH 2275 User Manual
Korg Electronic Keyboard E F G 1 User Manual