™
™
Dell PowerEdge Cluster SE300 and SL300
PLATFORM GUIDE
Dell PowerEdge
Cluster
ꢀꢁꢂꢃ
support.dell.com
ꢀꢁꢂꢂꢃꢄꢅꢆꢇꢁ ꢈꢉꢊꢁꢃꢄꢋꢂꢌꢍꢎꢁ ꢄꢏꢈꢐꢑꢑꢄꢒꢓꢉꢄꢏꢔꢐꢑꢑ
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
ꢀꢀꢀꢁꢂꢃꢄꢄꢁꢅꢆꢇ
ꢈꢉꢉꢆꢊꢋꢁꢂꢃꢄꢄꢁꢅꢆꢇ
ꢀꢁꢂꢃꢄꢅꢆꢀꢁꢂꢇ ꢃꢄꢅꢆꢈꢉꢊꢂꢇꢁꢋꢄꢅꢆꢉꢋꢌꢆꢍꢉꢎꢋꢇꢋꢏꢄ
Throughout this guide, blocks of text may be accompanied by an icon and printed in
bold type or in italic type. These blocks are notes, notices, cautions, and warnings,
and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of
your computer system.
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢇꢀꢁꢂꢃꢄꢅꢇꢈꢉꢊꢈꢋꢌꢍꢎꢏꢇꢎꢈꢍꢐꢎꢑꢇꢒꢓꢍꢎꢉꢍꢈꢌꢔꢇꢊꢌꢕꢌꢖꢎꢇꢍꢓꢇꢐꢌꢑꢊꢗꢌꢑꢎꢇꢓꢑꢇꢔꢓꢏꢏꢇ
ꢓꢘꢇꢊꢌꢍꢌꢇꢌꢉꢊꢇꢍꢎꢔꢔꢏꢇꢙꢓꢚꢇꢐꢓꢗꢇꢍꢓꢇꢌꢛꢓꢈꢊꢇꢍꢐꢎꢇꢒꢑꢓꢜꢔꢎꢕꢝ
ꢄ ꢂꢃꢁꢀꢆꢇ ꢇꢄ ꢂꢃꢁꢀꢇꢈꢉꢊꢈꢋꢌꢍꢎꢏꢇꢌꢇꢒꢓꢍꢎꢉꢍꢈꢌꢔꢔꢙꢇꢐꢌ!ꢌꢑꢊꢓꢚꢏꢇꢏꢈꢍꢚꢌꢍꢈꢓꢉꢇꢗꢐꢈꢋꢐ"ꢇꢈꢘꢇ
ꢉꢓꢍꢇꢌꢛꢓꢈꢊꢎꢊ"ꢇꢕꢌꢙꢇꢑꢎꢏꢚꢔꢍꢇꢈꢉꢇꢕꢈꢉꢓꢑꢇꢓꢑꢇꢕꢓꢊꢎꢑꢌꢍꢎꢇꢈꢉ#ꢚꢑꢙꢝ
$ %ꢀꢃꢀ&ꢆꢇ ꢇ$ %ꢀꢃꢀ&ꢇꢈꢉꢊꢈꢋꢌꢍꢎꢏꢇꢌꢇꢒꢓꢍꢎꢉꢍꢈꢌꢔꢔꢙꢇꢐꢌ!ꢌꢑꢊꢓꢚꢏꢇꢏꢈꢍꢚꢌꢍꢈꢓꢉꢇꢗꢐꢈꢋꢐ"ꢇ
ꢈꢘꢇꢉꢓꢍꢇꢌꢛꢓꢈꢊꢎꢊ"ꢇꢋꢓꢚꢔꢊꢇꢑꢎꢏꢚꢔꢍꢇꢈꢉꢇꢊꢎꢌꢍꢐꢇꢓꢑꢇꢏꢎꢑꢈꢓꢚꢏꢇꢜꢓꢊꢈꢔꢙꢇꢈꢉ#ꢚꢑꢙꢝ
Information in this document is subject to change without notice.
© 2001 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Cor-
poration is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, PowerEdge, PowerVault, and
Dell OpenManage are trademarks of Dell Computer Corporation; Microsoft, Windows, and
Windows NT are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Computer Corporation disclaims any
proprietary interest in trademarks and trade names other than its own.
March 2001 P/N 6C395 Rev. A01
ꢃ
ꢀꢁꢂꢂ ꢄꢅꢆꢇꢁ ꢈꢉꢊꢁ ꢄꢋꢂꢌꢍꢎꢁ ꢄꢏꢈꢐꢑꢑꢄ
ꢒꢓꢉꢄꢏꢔꢐꢑꢑꢄꢅꢂꢒꢎꢕꢆ ꢖꢄꢗꢌꢘꢉꢁ
ꢃ
®
®
This guide provides the latest information on using Microsoft Windows NT Server
®
4.0, Enterprise Edition operating system and Windows 2000 Advanced Server oper-
ating system for the following Dell PowerEdge Cluster products and components:
•
Dell PowerEdge Cluster SE300
—
Servers: PowerEdge 1550, 2400, 2450, 2500, 2550, 4400, 6400, 6450, and
8450
—
—
Storage: PowerVault™ 200S, 201S, 210S, and 211S
Cluster interconnect: Fast Ethernet
•
Dell PowerEdge Cluster SL300
—
Servers: PowerEdge 1550, 2400, 2450, 2500, 2550, 4400, 6400, 6450, and
8450
—
—
Storage: PowerVault 200S, 201S, 210S, and 211S
Cluster interconnect: Giganet cluster local area network (cLAN)
See the section related to your cluster product for more information on supported
configurations.
NOTE: Configurations not listed in this document are not certified and are not sup-
ported by Dell or Microsoft.
support.dell.com
Cluster SE300 and SL300 Platform Guide
1-1
ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢈꢉꢊꢋꢌꢃꢄ ꢍꢅꢎꢏꢏ ꢐꢑꢆ ꢍꢒꢎꢏꢏ
PowerEdge Clusters SE300 and SL300 support clustering with Windows NT
Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. See the following
sections for information on supported configurations and service packs for your
Windows operating system.
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢈꢈꢇꢉꢃꢊꢋꢂꢌꢍꢃꢇꢎꢍꢏꢊꢍꢏ
Installation instructions for hardware configurations using Windows 2000 Advanced
Server Service Pack 1 (SP1) or later can be found in the Dell PowerEdge Cluster
SE300 and SL300 Installation and Troubleshooting Guide.
Your PowerEdge Cluster SE300 and SL300 system supports the following PowerEdge
servers as cluster nodes in homogeneous pairs (same server) with Windows 2000
Advanced Server SP1 or later:
•
•
•
•
•
•
•
•
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
NOTE: Heterogeneous server clusters (mixed server models) are not supported with
PowerEdge Cluster SE300 and SL300 configurations running Windows 2000
Advanced Server SP1 or later.
ꢀꢁꢂꢃꢄꢅꢆꢇꢐꢑꢇꢎꢍꢏꢊꢍꢏꢇꢒꢓꢈꢔꢇꢕꢂꢖꢍꢏꢗꢏꢁꢆꢍꢇꢕꢃꢁꢖꢁꢄꢂ
Your PowerEdge Clusters SE300 and SL300 support the following PowerEdge sys-
tems as cluster nodes in homogeneous pairs (same server) with Windows NT Server
4.0, Enterprise Edition:
•
•
•
•
•
•
•
•
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
1-2
Cluster SE300 and SL300 Platform Guide
ꢀꢁꢂꢃꢄꢅꢆꢇꢐꢑꢇꢒꢓꢈꢇꢎꢍꢏꢊꢁꢌꢍꢇꢘꢋꢌꢙꢇꢎꢚꢗꢗꢄꢏꢖ
Dell recommends using Windows NT SP 6.0a or later for PowerEdge Cluster SE300
and SL300 systems.
NOTE: Both nodes must be configured with similar drivers (network interface control-
ler [NIC], redundant array of independent disks [RAID] controller, and so on), utilities
(Dell OpenManage™ Array Manager), firmware (PowerEdge expandable RAID control-
ler [PERC] 3/DC), and the latest basic input/output system (BIOS) for each system.
ꢀꢅꢓꢈ ꢎꢔꢕꢈ ꢖꢑꢋꢌꢐꢉꢉꢐꢌꢗꢁꢑ
You must install the PERC 3/DC in a 64-bit, 33-MHz or 32-bit, 33-MHz PCI slot. For
your specific system, see the peripheral component interconnect (PCI) slot assign-
ments in the following subsections. If you are using multiple PERC 3/DCs, Dell
recommends that you install them on separate buses.
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ#$$ꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇꢏꢈꢗꢌꢐꢙꢇ
ꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇꢈꢚꢒꢍꢊꢇꢈꢇ
ꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for buses, RAID control-
lers, and NICs:
•
•
PCI buses
—
—
PCI bus 1: 64-bit, 66-MHz slot.
PCI bus 2: 64-bit, 66-MHz slot.
RAID controllers
—
—
RAID controllers can be installed in any available PCI slot.
If you use multiple RAID controllers and there are slots available, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
•
NICs
—
—
You can install NICs in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
NOTE: To make sure that the small computer system interface (SCSI) or RAID control-
ler attached to the boot drives initializes first, you might have to change the scan order
of the PCI bus, if the BIOS supports this option, or change the order of the RAID, and
NIC. Performing these tasks ensures that the Windows operating system numbers
the boot drives in the proper sequence.
support.dell.com
Cluster SE300 and SL300 Platform Guide
1-3
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ ꢒꢈꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢛꢒꢘꢖꢔꢐꢌꢉꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇ
ꢏꢈꢗꢌꢐꢙꢇꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇ
ꢈꢚꢒꢍꢊꢇꢈꢇꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for buses, RAID control-
lers, NICs, and a Dell OpenManage Remote Assistant Card (DRAC).
•
•
PCI buses
—
—
PCI bus 1: PCI slots 1 through 5 are 64-bit, 33-MHz.
PCI bus 2: PCI slot 6 is 32-bit, 33-MHz.
RAID controllers
—
—
RAID controllers can be installed in any available PCI slot.
If you use multiple RAID controllers and there are slots available, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
—
If you are not currently using a DRAC and do not plan to use one in the
future, Dell recommends that you install one RAID controller in the 32-bit
slot, even if it is a 64-bit RAID controller.
•
•
NICs
—
—
You can install NICs in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 6.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives
initializes first, you might have to change the scan order of the PCI bus, if the BIOS
supports this option, or change the order of the RAID, NIC, and DRAC. Performing
these tasks ensures that the Windows operating system numbers the boot drives in
the proper sequence.
1-4
Cluster SE300 and SL300 Platform Guide
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ ꢒ$ꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢛꢒꢘꢖꢔꢐꢌꢉꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇ
ꢏꢈꢗꢌꢐꢙꢇꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇ
ꢈꢚꢒꢍꢊꢇꢈꢇꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for the system’s buses,
RAID controllers, NICs, and DRAC.
•
•
PCI buses
—
PCI bus 1: PCI slots 1 through 3 are 32-bit, 33-MHz.
RAID controllers
—
—
RAID controllers can be installed in any available PCI slot.
If you use multiple RAID controllers and there are slots available, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
•
•
NICs
—
NICs can be installed in any available PCI slot. Dell recommends that Giganet
cLAN adapters be installed in PCI slots 1 or 2.
—
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 2.
—
NOTES: If you plan to use a DRAC, one PCI slot is available for a PERC 3/DC RAID
controller for shared storage.
To make sure that the SCSI or RAID controller attached to the boot drives initializes
first, you might have to change the scan order of the PCI bus, if the BIOS supports
this option, or change the order of the RAID, NIC, and DRAC. Performing these tasks
ensures that the Windows operating system numbers the boot drives in the proper
sequence.
support.dell.com
Cluster SE300 and SL300 Platform Guide
1-5
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ $ꢈꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆꢇ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢛꢒꢘꢖꢔꢐꢌꢉꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇ
ꢏꢈꢗꢌꢐꢙꢇꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇ
ꢈꢚꢒꢍꢊꢇꢈꢇꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for buses, RAID control-
lers, NICs, and a DRAC.
•
PCI buses
—
—
—
PCI bus 1: PCI slots 6 and 7 are 32-bit, 33-MHz.
PCI bus 2: PCI slots 3, 4, and 5 are 64-bit, 33-MHz.
PCI bus 3: PCI slots 1 and 2 are 64-bit, 66-MHz.
•
RAID controllers
—
—
RAID controllers can be installed in any available PCI slot.
If you use multiple RAID controllers and there are slots available, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
•
•
NICs
—
NICs can be installed in any available PCI slot. Dell recommends that Giganet
cLAN adapters be installed in PCI slots 3, 4, 5 or 6.
—
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 7.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives
initializes first, you might have to change the scan order of the PCI bus, if the BIOS
supports this option, or change the order of the RAID, NIC, and DRAC. Performing
these tasks ensures that the Windows operating system numbers the boot drives in
the proper sequence.
1-6
Cluster SE300 and SL300 Platform Guide
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ $$ꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢛꢒꢘꢖꢔꢐꢌꢉꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇ
ꢏꢈꢗꢌꢐꢙꢇꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇ
ꢈꢚꢒꢍꢊꢇꢈꢇꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for buses, RAID control-
lers, NICs, and a DRAC.
•
PCI buses
—
PCI bus 1: PCI slots 1, 2, and 3 are 64-bit, 33-Mhz.
•
RAID controllers
—
—
RAID controllers can be installed in any available PCI slot.
If you use multiple RAID controllers and there are slots available, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
—
If you are not currently using a DRAC and do not plan to use one in the
future, Dell recommends that you install one RAID controller in the 32-bit
slot, even if it is a 64-bit RAID controller.
•
•
NICs
—
—
You can install NICs in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
PCI slot 2 is dedicated to interface with the optional DRAC.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives
initializes first, you might have to change the scan order of the PCI bus, if the BIOS
supports this option, or change the order of the RAID, NIC, and DRAC. Performing
these tasks ensures that the Windows operating system numbers the boot drives in
the proper sequence.
support.dell.com
Cluster SE300 and SL300 Platform Guide
1-7
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇꢒꢒꢈꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇꢏꢈꢗꢌꢐꢙꢇ
ꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇꢈꢚꢒꢍꢊꢇꢈꢇ
ꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for the system’s PCI
buses, RAID controllers, NICs, and DRAC.
•
PCI buses
—
—
—
PCI bus 1: PCI slots 1 and 2 are 64-bit, 33/66-MHz.
PCI bus 2: PCI slots 3 through 6 are 64-bit, 33-MHz.
PCI bus 3: PCI slot 7 is 32-bit, 33-MHz.
•
RAID controllers
—
RAID controllers can be installed in any available 64-bit, 33-MHz or 32-bit,
33-MHz PCI slot.
—
If you use multiple RAID controllers and there are available slots, Dell recom-
mends installing the RAID controllers on separate PCI buses to balance the
load on the system.
•
•
NICs
—
—
You can install NICs in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 7.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives
initializes first, you might have to change the scan order of the PCI bus, if the BIOS
supports this option, or change the order of the RAID, NIC, and DRAC. Performing
these tasks ensures that the Windows operating system numbers the boot drives in
the proper sequence.
1-8
Cluster SE300 and SL300 Platform Guide
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ&ꢒꢈꢈꢇꢋꢂꢃꢇ
&ꢒ$ꢈꢇꢎ'ꢆꢖꢍ(ꢆꢇꢘꢝꢋꢖ"ꢄꢏ(ꢇꢎꢚꢗꢗꢄꢏꢖ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇꢏꢈꢗꢌꢐꢙꢇ
ꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇꢈꢚꢒꢍꢊꢇꢈꢇ
ꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for the system’s PCI
buses, RAID controllers, NICs, and DRAC.
•
PCI buses
—
—
—
PCI bus 1: PCI slot 1 is 32-bit, 33-MHz.
PCI bus 2: PCI slots 2 through 5 are 64-bit, 33-MHz.
PCI bus 3: PCI slots 6 and 7 are 64-bit, 33/66-MHz.
•
RAID controllers
—
RAID controllers can be installed in any available 32-bit, 33-MHz or 64-bit,
33-MHz PCI slot.
—
If you use multiple RAID controllers and there are available PCI slots, Dell
recommends installing the RAID controllers on separate PCI buses to bal-
ance the load on the system.
•
•
NICs
—
—
You can install NICs in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 1.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives
initializes first, you might have to change the scan order of the PCI bus, if the BIOS
supports this option, or change the order of the RAID, NIC, and DRAC. Performing
these tasks ensures that the Windows operating system numbers the boot drives in
the proper sequence.
support.dell.com
Cluster SE300 and SL300 Platform Guide
1-9
ꢉꢃꢃꢁꢂꢛꢇꢘꢍꢏꢁꢗꢜꢍꢏꢋꢝꢆꢇ ꢍ!ꢚꢁꢏꢍꢃꢇ"ꢄꢏꢇꢘꢄꢅꢍꢏꢕꢃꢛꢍꢇ)ꢒ$ꢈꢇ%ꢝꢚꢆꢖꢍꢏꢇ
ꢐꢄꢃꢍꢆ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇ ꢈꢉꢊꢋꢈꢉꢌꢇꢍꢎꢏꢐꢈꢑꢑꢈꢐꢍꢒꢎꢇꢏꢓꢒꢔꢑꢊꢇꢕꢌꢇꢖꢌꢉꢗꢒꢉꢘꢌꢊꢇꢒꢎꢑꢙꢇꢕꢙꢇꢐꢉꢈꢍꢎꢌꢊꢇ
ꢏꢌꢉꢚꢍꢛꢌꢇꢐꢌꢛꢓꢎꢍꢛꢍꢈꢎꢏꢜꢇꢝꢌꢗꢒꢉꢌꢇꢋꢒꢉ ꢍꢎ!ꢇꢍꢎꢏꢍꢊꢌꢇꢐꢓꢌꢇꢏꢙꢏꢐꢌꢘ"ꢇꢏꢌꢌꢇꢐꢓꢌꢇꢏꢈꢗꢌꢐꢙꢇ
ꢍꢎꢏꢐꢉꢔꢛꢐꢍꢒꢎꢏꢇꢍꢎꢇꢙꢒꢔꢉꢇ#ꢒꢋꢌꢉ$ꢊ!ꢌꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢅꢋꢃꢌꢉ ꢇꢊꢒꢛꢔꢘꢌꢎꢐꢇꢐꢒꢇꢈꢚꢒꢍꢊꢇꢈꢇ
ꢏꢍꢐꢔꢈꢐꢍꢒꢎꢇꢐꢓꢈꢐꢇꢛꢒꢔꢑꢊꢇꢛꢈꢔꢏꢌꢇꢏꢌꢉꢍꢒꢔꢏꢇꢍꢎ%ꢔꢉꢙꢇꢒꢉꢇꢊꢌꢈꢐꢓꢜ
The following list provides PCI slot assignment information for the system’s PCI
buses, RAID controllers, NICs, and DRAC.
•
PCI buses
—
—
—
—
PCI bus 1: PCI slots 1 and 2 are 64-bit, 33-MHz.
PCI bus 2: PCI slots 3 through 6 are 64-bit, 33-MHz.
PCI bus 3: PCI slots 7 and 8 are 64-bit, 33/66-MHz.
PCI bus 4: PCI slots 9 and 10 are 64-bit, 33/66-MHz.
•
RAID controllers
—
—
Install the RAID controller for the server’s internal drives in PCI slot 1.
Install additional RAID controllers in any available 64-bit, 33-MHz or 32-bit,
33-MHz PCI slot.
—
If you use multiple RAID controllers and there are available slots, Dell recom-
mends installing the RAID controllers on separate 64-bit PCI buses to
balance the load on the system.
•
•
NICs
—
—
NICs can be installed in any available PCI slot.
Dell recommends that Giganet cLAN adapters be installed in 64-bit slots.
DRAC
If you are currently using a DRAC or plan to use one in the future, install it in
PCI slot 2.
—
NOTE: To make sure that the SCSI or RAID controller attached to the boot drives ini-
tializes first, you might have to change the scan order of the PCI bus, if the system
BIOS supports this option, or change the order of the RAID, NIC, and DRAC. Perform-
ing these tasks ensures that the Windows operating system numbers the boot drives
in the proper sequence.
1-10 Cluster SE300 and SL300 Platform Guide
ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢈꢉꢊꢋꢌꢃꢄ ꢍꢅꢎꢏꢏ ꢐꢑꢆ ꢍꢒꢎꢏꢏ
ꢈꢁꢑꢘꢗꢇꢊꢄꢐꢌꢗꢁꢑ ꢙꢐꢌꢄꢗꢚ ꢛꢁꢄꢜ
The following form can be attached to the back of each cluster node or rack and can be
used by the system installer to record important information about the hardware on
each cluster component. In addition, have a copy of the form available any time you
call Dell for technical support.
Record the following information on the configuration matrix form:
•
•
•
•
•
Cluster name, installer, date installed, and notes
Cluster server information
Storage array description for each storage array
Service tag information for each cluster component
Each cluster node’s PCI slot number, a description of each slot, the adapters
installed in each slot, and a usage description for each adapter installed
support.dell.com
Cluster SE300 and SL300 Platform Guide 1-11
ꢁ ꢁꢂ ꢃꢄꢀꢅꢆꢃꢄ
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢉꢌꢀꢍꢎꢏꢐꢆꢑꢒ
ꢙꢚꢛꢗꢘ ꢜꢝ !"
ꢓ
ꢌꢀꢍꢔꢕ ꢕꢖ ꢗꢘ
ꢀ
ꢕ#$ꢄ%&'()*+,ꢝ-./012ꢛ345
ꢀꢁ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢒꢓꢔꢕꢖꢗꢘꢙꢚꢛꢜ
ꢂꢃ ꢝꢒꢂꢃ !"#$ ꢕ%&ꢗꢘ'(#$ ꢄꢅꢆꢋꢌ)*ꢊ+*",-.
/
ꢄꢅꢂꢃ 01ꢝꢒꢂꢃ !"#$ ꢕ%&ꢗꢘ'(#$ ꢄꢅꢆꢋꢌ23ꢊ01
",-./
45ꢉ+"67ꢕ89: ;&<=>?
@AB8 CDEF
© 2001 Dell Computer Corporation
ꢀꢁ Dell Computer Corporation ꢂꢃꢄꢅ ꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏ
ꢐꢑꢒꢓꢔꢕꢖꢗꢘ ꢙꢘ
ꢚ
ꢛ
Dell DELL
PowerEdge PowerVault
Dell OpenManage
Dell Computer
Corporation ꢖꢗꢘ Microsoft Windows ꢚ Windows NT ꢛ Microsoft Corporation ꢖꢜꢝꢗꢘ
ꢐꢑꢒꢓ !ꢖ"#ꢗꢘꢚ$%&'ꢛ()*+,ꢗꢘꢚ$%&'ꢖ-./"ꢏ0ꢖ$%
Dell
1"#-.ꢖꢗꢘꢚ$%&'ꢆ)*ꢈꢉ234
Computer Corporation
2001 5 3 6 P/N 6C395 Rev. A01
™
™
ꢀ
ꢁꢂꢃꢄ
Dell PowerEdge Cluster SE300 SL300
Microsoft® Windows NT® Server 4.0
Windows® 2000
ꢒꢓꢍꢔꢕꢖꢗꢘꢙꢚ
ꢀꢁꢂꢃꢄꢅꢆ
ꢇ
ꢈꢉꢊꢋꢌꢍ
ꢉꢊꢋꢌꢎꢏꢐꢑ
Advanced Server
Dell PowerEdge Cluster
•
Dell PowerEdge Cluster SE300
ꢛꢜꢝ
ꢍ
PowerEdge 1550 2400 2450 2500 2550 4400 6400 6450
8450
PowerVault™ 200S 201S 210S 211S
ꢍ
!"#
$%&' ()ꢐ*+
•
Dell PowerEdge Cluster SL300
ꢛꢜꢝ
ꢍ
PowerEdge 1550 2400 2450 2500 2550 4400 6400 6450
8450
!"#
$%&'
ꢍ
PowerVault 200S 201S 210S 211S
$%,-+
Giganet
(cLAN)
./0123ꢖ45 6789:ꢖ$%ꢒꢓ;/ꢖ<=
ꢀ>?@ꢕABCDꢖ23E.FGHI JKLM
ꢀ
N
Dell Microsoft
01
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-1
ꢀ
PowerEdge Cluster SE300 SL300
ꢍ
01O
ꢇ
ꢈN
PowerEdge Cluster SE300
Advanced Server
678ꢐꢑ<=
SL300
APQ$% ./01ꢖ
Windows NT Server 4.0
Windows
Windows 2000
ꢉꢊꢋꢌ23ꢍꢛꢜRꢕSꢖꢙꢚ
Windows 2000 Advanced Server
./Tꢎ
NUꢘꢈꢀꢖVꢕ23WX>
Windows 2000 Advanced Server Service Pack 1 (SP1)
?
YꢐO
ꢍ
WX9Z[\]ꢁꢂ A^_
Dell PowerEdge Cluster SE300 SL300
`Q
SL300
f
NUꢘꢈꢀa :ꢖ
ꢍ
Windows 2000 Advanced Server SP1
PowerEdge Cluster SE300
ꢋꢌ01Obcdꢔe ;bꢛꢜꢝ Aꢆꢐꢑ
ꢛꢜꢝꢎꢊ$%=
PowerEdge
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
•
•
•
•
•
•
•
•
ꢀ
O`Q
NUꢘꢈꢀꢖ
ꢍ
PowerEdge Cluster SE300
Windows 2000 Advanced Server SP1
23A L01ghꢛꢜꢝ$% ꢛꢜꢝchij
SL300
ꢀꢁꢂ
Windows NT Server 4.0
`Q
ꢇ
ꢈa :ꢖ
ꢍ
PowerEdge Cluster SE300 SL300
ꢋꢌꢎꢊ$%=f
01Obc
Windows NT Server 4.0
dꢔe ;bꢛꢜꢝ Aꢆꢐꢑ
PowerEdge
•
•
•
•
•
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-2
•
•
•
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
ꢃꢄ
Windows NT 4.0 Service Pack
klO
ꢍ
PowerEdge Cluster SE300 SL300
ꢋꢌATꢎ
NUꢘꢈꢀ
Windows NT SP 6.0a
Dell
ꢀ
mnꢋꢌꢖop=fqrs23;tꢖuvwx +yz{|}ꢝ
~€
[NIC]
Dell OpenManage™
„C‡ˆꢝ
‚ƒ„C
PowerEdge
(BIOS)
|}ꢝꢞ
†ꢎwx
‰ꢕ
ꢐŒꢗꢘꢈꢀꢖꢀŽ ŽDꢋꢌ
[RAID]
YŠ‹
|}ꢝ
RAID
[PERC] 3/DC
/
ꢁꢂ
PERC 3/DC
:rsꢆ
WXO
N
‘’A eꢏ“”ꢖꢋꢌ
PERC 3/DC
64 33MHz 32 33MHz PCI
678ꢐꢑ<=Aꢖ•–ꢔꢕ&—
l:ꢆœWXOLbꢖžŸ
‘’˜2 ™š:Tꢎ›p
k
(PCI)
PERC 3/DC Dell
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 1550
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎꢒꢓꢔꢕꢖꢐꢗꢘ ꢙꢚ
ꢛꢜ
ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0ꢅ12
PowerEdge
ꢑ
CDꢅž
|}ꢝꢍ
ꢖ
NIC PCI
‘’˜2ꢙꢚ
RAID
•
ž
PCI
PCI
ž
ž
‘’
‘’
1
64
64
66MHz
66MHz
PCI
2
•
•
|}ꢝ
RAID
:YꢐO¡¢Yꢎꢖ
‘’AWX
|}ꢝ
RAID
PCI
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
Dell PCI
žŸWX
RAID
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NIC
PCI
klO
‘’AWX
¨2ꢝ
Giganet cLAN
Dell
64
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-3
ꢀ
©ª«¬-®¯—z°±²uvꢝꢖ<h³´cꢋꢌz{
N
|}ꢝ
(SCSI)
RAID
N¿U¸
RAID
:Yµ¶·U¸
žꢖ¹º»x ™š
01¼½¾
ꢍ
PCI
ꢖ»x ÀQÁÂꢉꢊYꢐª«
BIOS
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝ
Windows
NIC
PQÅÆ
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 2400
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎ345ꢒꢓꢔꢕꢖꢐꢗ
ꢙꢚꢛꢜ ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0
ꢘ
PowerEdge
ꢅ12
ꢑ
CDꢅž
|}ꢝ
ꢐŒ
ÇwÈÉÊ
ꢖ
(DRAC) PCI
‘’
RAID
NIC
Dell OpenManage
˜2ꢙꢚ
•
•
ž
PCI
PCI
ž
ž
‘’
‘’
°
©
64 33MHz
1
PCI
PCI
1
6
5
©
32 33MHz
PCI
2
|}ꢝ
RAID
:YꢐO¡¢Yꢎꢖ
‘’AWX
|}ꢝ
RAID
PCI
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
PCI
Dell
Dell
žŸWX
RAID
™š:ËÌJBTꢎ
JKꢐÍÎLÏ#Tꢎ
kl:O
‘’
32
DRAC
|}ꢝ ÑTÒÓ
AWXÐp
64 RAID
|}ꢝ
RAID
•
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NIC
PCI
klO
‘’AWX
¨2ꢝ
Giganet cLAN
Dell
64
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
6
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
01¼½¾
RAID
N¿U¸
žꢖ¹º»x ™š
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ÀQÁÂꢉꢊYꢐª«
Windows
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-4
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 2450
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎ345ꢒꢓꢔꢕꢖꢐꢗ
ꢘ
ꢙꢚꢛꢜ
ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0
PowerEdge
ꢅ12
ꢑ
CDꢅꢋꢌž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
RAID
NIC DRAC PCI
•
ž
PCI
ž
‘’
°
©
32 33MHz
PCI
1
PCI
1
3
•
•
|}ꢝ
RAID
:YꢐO¡¢Yꢎꢖ
‘’AWX
|}ꢝ
RAID
PCI
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
PCI
Dell
PCI
žŸWX
RAID
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
klO
‘’
N
AWX
PCI
NCI Dell
1
2
¨2ꢝ
Giganet cLAN
klO
‘’AWX ¨2ꢝ
Giganet cLAN
Dell
64
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
2
ꢀ
™š:Ï#Tꢎ
ÔYꢐꢆꢎꢏÕÖ !ꢝꢖ
|}ꢝWXO
PERC 3/DC RAID
DRAC
Yꢎꢖ
‘’A
PCI
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
RAID
N¿U¸
žꢖ¹º»x ™š
ÀQÁÂꢉꢊYª«
01¼½¾
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
Windows
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-5
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 2500
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎ345ꢒꢓꢔꢕꢖꢐꢗ
ꢙꢚꢛꢜ ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0
ꢘ
PowerEdge
ꢅ12
ꢑ
CDꢅž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
RAID
NIC DRAC PCI
•
ž
PCI
PCI
ž
ž
ž
‘’
‘’
‘’
ꢍ
ꢍ
©
ꢍ
©
32 33MHz
1
PCI
PCI
PCI
6
3
1
7
©
64 33MHz
PCI
2
3
4
5
64 66MHz
PCI
2
•
•
|}ꢝ
RAID
:YꢐO¡¢Yꢎꢖ
‘’AWX
|}ꢝ
RAID
PCI
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
Dell PCI
žŸWX
RAID
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
klO
‘’
N
A
PCI
NCI Dell
PCI
3
4
5
6
WX
¨2ꢝ
Giganet cLAN
klO ‘’AWX ¨2ꢝ
Giganet cLAN
Dell
64
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
7
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
01¼½¾
RAID
N¿U¸
žꢖ¹º»x ™š
ÀQÁÂꢉꢊYª«
ꢍ
ꢖ»
PCI
x
Æ
BIOS
Windows
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-6
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 2550
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎ345ꢒꢓꢔꢕꢖꢐꢗ
ꢙꢚꢛꢜ ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0
ꢘ
PowerEdge
ꢅ12
ꢑ
CDꢅž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
RAID
NIC DRAC PCI
•
ž
PCI
ž
‘’
ꢍ
©
64 33MHz
PCI
1
PCI
1
2
3
•
•
|}ꢝ
RAID
:YꢐO¡¢Yꢎꢖ
‘’AWX
|}ꢝ
RAID
PCI
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
PCI
Dell
Dell
žŸWX
RAID
™š:ËÌJBTꢎ
JKꢐÍÎLÏ#Tꢎ
kl:O
‘’
32
DRAC
|}ꢝ ÑTÒÓ
AWXÐp
64 RAID
|}ꢝ
RAID
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NIC
PCI
klO
‘’AWX
¨2ꢝ
Giganet cLAN
Dell
64
•
DRAC
‘’ ×ꢎꢏ—zY½
DRAC
PCI
2
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
01¼½¾
RAID
N¿U¸
žꢖ¹º»x ™š
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ÀQÁÂꢉꢊYꢐª«
Windows
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-7
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 4400
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎꢒꢓꢔꢕꢖꢐꢗꢘ ꢙꢚ
ꢛꢜ
ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0ꢅ12
PowerEdge
ꢑ
CDꢅꢋꢌ
ž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
PCI
RAID
NIC DRAC PCI
•
ž
PCI
PCI
ž
‘’
ꢍ
°
©
©
©
64 33/66MHz
1
2
3
PCI
PCI
PCI
1
3
7
2
6
ž
ž
‘’
‘’
64 33MHz
PCI
32 33MHz
PCI
•
•
|}ꢝ
RAID
:Yꢐꢆ
A
|}ꢝWXO¡¢Yꢎꢖ
N
‘’
33MHz PCI
RAID
64
33MHz
32
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ‘’
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
kl:OLbꢖ
Dell PCI
žŸWX
RAID
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NIC
PCI
klO
‘’AWX
¨2ꢝ
Dell
64
Giganet cLAN
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
7
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
01¼½¾
RAID
N¿U¸
žꢖ¹º»x ™š
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ÀQÁÂꢉꢊYꢐª«
Windows
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-8
ꢅꢆ
ꢑ
PowerEdge 6400 6450
ꢒꢓꢔꢕꢃꢄꢊꢋꢌꢍꢎꢏꢐ
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎꢒꢓꢔꢕꢖꢐꢗꢘ ꢙꢚ
ꢛꢜ
ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0ꢅ12
PowerEdge
ꢑ
CDꢅꢋꢌ
ž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
PCI
RAID
NIC DRAC PCI
•
ž
PCI
PCI
ž
‘’
©
°
ꢍ
32 33MHz
1
2
3
PCI
PCI
PCI
1
2
6
ž
ž
‘’
‘’
©
©
64 33 MHz
PCI
5
7
64 33/66MHz
PCI
•
•
|}ꢝ
RAID
:Yꢐꢆ
A
|}ꢝWXO¡¢Yꢎꢖ
N
‘’
33MHz PCI
RAID
32
33MHz
64
™š:Tꢎ›p
|}ꢝ JK£.Yꢎꢖ
‘’
kl:OLbꢖ
Dell
RAID
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
RAID
PCI
žŸWX
PCI
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NIC
PCI
klO
‘’AWX
¨2ꢝ
Giganet cLAN
Dell
64
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
1
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
SCSI
01¼½¾
RAID
N¿U¸
žꢖ¹º»x ™š
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ÀQÁÂꢉꢊYꢐª«
Windows
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-9
ꢅꢆ
ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ
PowerEdge 8450
ꢀꢁꢂꢃ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐ ꢑꢎꢒꢓꢔꢕꢖꢐꢗꢘ ꢙꢚ
ꢛꢜ
ꢒꢓꢝ !ꢐ"ꢅꢍ#$% &'()*+,-ꢉ./0ꢅ12
PowerEdge
ꢑ
CDꢅꢋꢌ
ž
|}ꢝ
ꢍ
ꢖ
‘’˜2ꢙꢚ
PCI
RAID
NIC DRAC PCI
•
ž
PCI
PCI
ž
‘’
ꢍ
°
ꢍ
ꢍ
©
©
©
64 33MHz
1
2
3
4
PCI
PCI
PCI
PCI
1
3
7
9
2
6
8
ž
ž
ž
‘’
‘’
‘’
64 33MHz
PCI
64 33/66MHz
PCI
©
PCI
10 64 33/66MHz
•
•
|}ꢝ
RAID
ꢆꢎꢏꢛꢜꢝØÙuvꢝꢖ
|}ꢝWXO
‘’
A
RAID
PCI
1
ꢆœÒ
|}ꢝWXO¡¢Yꢎꢖ
N
‘’A
RAID
64 33MHz 32 33MHz PCI
|}ꢝ JK£.Yꢎꢖ‘’ kl:OLbꢖ
64
™š:Tꢎ›p
RAID
žŸWX
Dell
|}ꢝꢐ¤¥ꢋꢌꢖ¦§
RAID
PCI
NIC
:YꢐO¡¢Yꢎꢖ
‘’AWX
NCI
PCI
klO
‘’AWX
¨2ꢝ
Dell
64
Giganet cLAN
•
DRAC
™š:ËÌTꢎNÏ#ꢐÍTꢎ
6ꢆœWXO
‘’
A
DRAC
PCI
2
ꢀ
©ª«ꢋꢌ¬-®¯—z°±²uvꢝꢖ
N
|}ꢝ :Yµ¶·U¸
RAID
SCSI
01¼½¾ NU¸
žꢖ¹º»x ™šꢋꢌ
ꢍ
ꢖ»
PCI
x
Æ
BIOS
RAID NIC DRAC
ꢉꢊꢋꢌÃĪꢖ»xe±²uvꢝPQÅ
ÀQÁÂꢉꢊYꢐª«
Windows
ꢀ
2-10 Cluster SE300 SL300
ꢁꢂꢃꢄ
ꢀ
PowerEdge Cluster SE300 SL300
ꢃꢄꢅꢆ
ꢑ
YꢐÚOmn$%=fNcÛꢖÜÝ ꢋꢌWX¿YTꢎ¼ Þßàmp$%ꢔ
ꢕꢖá·Vꢕꢙꢚ â• 6Oãä
íꢕ
åæçè01éÌ ¬Ï#êÐë¼ Þꢖì
Dell
O23î Ÿßàꢐꢑꢙꢚ
•
•
•
•
•
$%ïð WX¿ WXñòꢍ#ó
$%ꢛꢜꢝꢙꢚ
mp !ꢝ„Cꢖ !ꢝ„C>?
mp$%ꢔꢕꢖꢛꢜôõꢙꢚ
mp$%=fꢖ
‘’ÅÆ emp‘’ꢖ>? öWXOmp‘’Aꢖ¨2ꢝ
PCI
ꢐŒmpöWX¨2ꢝꢖꢎ÷>?
support.dell.com
ꢀ
Cluster SE300 SL300
ꢁꢂꢃꢄ
2-11
ꢀꢁꢂꢃꢄꢂꢅꢆꢇ ꢈꢉꢊ
ꢀꢁꢂꢃꢄꢅꢂꢆꢇ ꢈꢉꢊꢋꢄꢌꢍꢎꢁꢏꢐꢑꢒꢓꢔꢕꢉꢊꢋꢖꢗꢘꢙꢚꢛꢜ
ꢃꢄꢝ ꢄ!"ꢄ#$%&'()ꢎꢄ*ꢚ&+ꢂ,ꢒꢜ-.ꢐꢑꢒꢖꢗꢘ
ꢀꢁꢂ ꢝ ꢃꢄ ꢈ/0123,ꢒ4ꢗ5ꢗꢓ6ꢚ789:;3<=>ꢑꢒꢖꢗꢘ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢂꢎꢅꢏꢉꢊꢐꢉꢑꢒꢓꢔꢕꢖꢗꢃꢘꢙꢔ
ꢚꢛꢜꢝ !ꢔ"#ꢗ$%ꢌꢜ&
ꢃꢄꢂ'(ꢂꢃꢘꢙꢔꢚꢛꢗ)%*ꢃ+,-./ꢔ01ꢜꢑꢒꢓ23ꢝ4*ꢔꢕꢗ
ꢌꢜ&
ꢅꢆꢂꢘꢙꢔꢚꢛꢗ)%*ꢃ56789ꢉ:;ꢔ<=./ꢓ23ꢝ4*ꢔꢕꢗꢌꢜ&
ꢀꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢐꢄꢅ ꢀꢑꢒꢓꢔꢕꢖꢗ
© 2001 ꢖꢘꢆꢙꢚꢛꢜꢊ Dell Computer Corporation ꢁꢓꢔꢕꢖꢗ
Dell Computer Corporation ꢀꢁꢂꢃꢄꢅꢆꢇꢀ ꢈꢉꢊꢋꢌꢈꢍ ꢅꢎꢏꢃꢐꢈꢑꢒꢓꢔꢃꢕꢖ
ꢗꢘꢑꢈꢙꢚꢛ
ꢜꢁꢝ !"ꢘꢑꢈꢅ#$ꢃ%ꢈꢑ&DellꢌDELL '(ꢌPowerEdgeꢌPowerVaultꢌꢐꢄ) Dell
OpenManage ꢋ Dell Computer Corporation ꢀ#$ꢝꢚꢛMicrosoftꢌWindowsꢌꢐꢄ) Windows NT
ꢋ Microsoft Corporation ꢀ*+#$ꢝꢚꢛ
ꢜꢁꢝꢋꢌ,-ꢃ.ꢖꢑ/00123ꢀ#$ꢐꢄ)4567 !"ꢘꢑꢈꢅ897:;ꢙꢚ
7ꢌ<ꢘꢗꢀ#$=456ꢋꢌ>? Dell Computer Corporation ꢃ@Aꢚꢅꢒꢀꢝꢋ:;ꢙBCꢛ
2001 D 3 E P/N 6C395 Rev. A01
Dell™ PowerEdge™ Cluster SE300 ꢀꢁꢂ
SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
®
ꢀꢁꢂꢃꢄꢅꢆ Dell PowerEdge Cluster ꢇ ꢈꢉꢊꢋꢌꢍꢎꢏꢌꢐꢑ Microsoft Windows
®
®
NT Server 4.0 Enterprise Edition ꢒꢓꢔꢎꢕꢖꢌꢗꢘꢙꢕꢚꢈꢉꢊ Windows 2000
Advanced Server ꢒꢓꢔꢎꢕꢖꢌꢗꢘꢙꢕꢚꢂꢛꢜꢝ !ꢆ"#$%ꢑ&'()ꢝ*
•
Dell PowerEdge Cluster SE300
—
—
—
+ꢎ,: PowerEdge 1550ꢄ2400ꢄ2450ꢄ2500ꢄ2550ꢄ4400ꢄ6400ꢄ6450ꢄ8450
™
ꢙꢐꢔꢎ- : PowerVault 200Sꢄ201Sꢄ210Sꢄ211S
Cluster ./01 : Fast Ethernet
•
Dell PowerEdge Cluster SL300
—
—
—
+ꢎ,: PowerEdge 1550ꢄ2400ꢄ2450ꢄ2500ꢄ2550ꢄ4400ꢄ6400ꢄ6450ꢄ8450
ꢙꢐꢔꢎ- : PowerVault 200Sꢄ201Sꢄ210Sꢄ211S
Cluster ./01 : Giganet cluster local area network (cLAN)
+ꢍꢎꢐ23 456789ꢆ:;ꢃꢄ<ꢛꢜꢆ Cluster ꢇ 6=>ꢝ ?ꢑ@A(
9BC28*
ꢀꢁꢂ ꢀꢁ6DE2398F845ꢃGH2398F8IJꢄDell )Iꢃ Microsoft
6ꢉ +ꢍꢎꢐꢃ&'23)KL*
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
3-1
PowerEdge Cluster SE300 ꢀꢁꢂ SL300
PowerEdge Cluster SE300 ꢈꢉꢊ SL300 ꢃꢄWindows NT Server 4.0 Enterprise Edition )
Iꢃ Windows 2000 Advanced Server ꢂꢆMNꢙOP5ꢑ+ꢍꢎꢐ()ꢝ*<ꢛꢜꢆ
Windows ꢒꢓꢔꢎꢕꢖꢌꢗꢘꢙꢕꢚꢂ+ꢍꢎꢐ23 45Q Service Pack 6789ꢆ
:;ꢃꢄRSꢆ?ꢑ@A(9BC28*
Windows 2000 Advanced Server
Windows 2000 Advanced Server Service Pack 1 (SP1) )IꢃT3RUꢑꢛꢜ(IVꢎW
XYZ45ꢆ[ꢌꢙꢐꢎ\]^ꢃꢄ_Dell PowerEdge Cluster SE300 and SL300 Installa-
tion and Troubleshooting Guide`6DE2398)ꢝ*
PowerEdge Cluster SE300 ꢈꢉꢊ SL300 ꢘꢙꢕꢚꢂꢃꢄWindows 2000 Advanced Server
SP1 )IꢃT3RUꢑꢛꢜꢝ abꢆꢓZ ( ac+ꢎ, ) dꢆMNꢙOeꢎWQ(
9ꢄRSꢆ PowerEdge +ꢎ,ꢑ+ꢍꢎꢐ()ꢝ*
•
•
•
•
•
•
•
•
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
ꢀꢁꢂWindows 2000 Advanced Server SP1 )IꢃT3RUꢑꢛꢜꢝ PowerEdge
Cluster SE300 ꢈꢉꢊ SL300 ꢆ45ꢂꢃꢄfb+ꢎ,MNꢙO ( +ꢎ,gbh
ijꢝ kl ) ꢑ+ꢍꢎꢐ()KL*
Windows NT 4.0 Server Enterprise Edition
PowerEdge Cluster SE300 ꢈꢉꢊ SL300 ꢘꢙꢕꢚꢂꢃꢄWindows NT Server 4.0 Enter-
prise Edition ꢑꢛꢜꢝ abꢆꢓZ ( ac+ꢎ, ) dꢆMNꢙOeꢎWQ(9ꢄRSꢆ
PowerEdge ꢘꢙꢕꢚꢑ+ꢍꢎꢐ()ꢝ*
•
•
•
PowerEdge 1550
PowerEdge 2400
PowerEdge 2450
3-2
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
•
•
•
•
•
•
PowerEdge 2500
PowerEdge 2550
PowerEdge 4400
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
Windows NT 4.0 Service Pack ꢀꢁꢂꢃꢄ
PowerEdge Cluster SE300 ꢈꢉꢊ SL300 ꢘꢙꢕꢚꢂꢃꢄWindows NT SP 6.0a )IꢃT3
RUꢑꢛꢜꢝ mQꢑꢈnJ()ꢝ*
ꢀꢁꢂ 8o3ꢆeꢎWpꢄabꢆWN[, (Network Interface Controller qNICrꢄ
Redundant Array of Independent Disks qRAIDr ꢋꢌꢐsꢎNFt )ꢄabꢆuꢎ
™
ꢕꢖvꢕꢖ (Dell OpenManage
Array Manager)ꢄabꢆwxꢎꢚXYZ
(PowerEdge Expandable RAID Controller qPERCr 3/DC)ꢄ"#ꢆ BIOS ( yꢀz{
|ꢘꢙꢕꢚ ) ꢑ[ꢌꢙꢐꢎ\(I}~ꢂ€ꢝ ‚hƒ„)ꢝ*
PERC 3/DC ꢃꢄꢅꢆꢇ
PERC 3/DC ꢃꢄ64 ꢞ†ꢐ 33 MHz ꢆ PCI ꢙs†ꢐ)Iꢃ 32 ꢞ†ꢐ 33 MHz ꢆ PCI ꢙ
s†ꢐ6‡„ˆ‰ ‚hƒ„)ꢝ*T3Š3ꢆꢘꢙꢕꢚ6ꢈ‰ PCI ꢙs†ꢐꢆ
‹„Œ9$%ꢃꢄRSꢆ?ꢑ@A(9BC28*Žꢆ PERC 3/DC ꢑꢛꢜꢝ kl
ꢃꢄꢆ,ꢙ6‡„ˆ‰ mQꢑꢈnJ()ꢝ*
PowerEdge 1550 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&'/012
ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGHIꢆJKꢑ
LꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNIC 6’“(I PCI ꢙs†ꢐꢆ‹„Œ9
$%ꢑ)QIpꢆꢂꢝ*
•
PCI ,ꢙ
—
—
PCI ,ꢙ 1: 64 ꢞ†ꢐ 66 MHz ꢙs†ꢐ
PCI ,ꢙ 2: 64 ꢞ†ꢐ 66 MHz ꢙs†ꢐ
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
3-3
•
•
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ
—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
ꢀꢁꢂŸ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAID Q NIC ꢆ^©ꢑª«()ꢝ*m¦
ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—)ꢝ*
PowerEdge 2400 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$RꢏS3ꢁT%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&
'/012ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGH
IꢆJKꢑLꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDell OpenManage Remote Assistant
Card (DRAC) 6’“(I PCI ꢙs†ꢐꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
•
PCI ,ꢙ
—
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1 ² 5 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 2: PCI ꢙs†ꢐ 6 ꢃ 32 ꢞ†ꢐ 33 MHz ꢂꢝ*
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ
—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
—
DRAC ꢑ³jꢛꢜ(9ꢈ¢oꢄ´µpꢛꢜꢝ ¶€hF8klꢃꢄRAID ꢋ
ꢌꢐsꢎNh 64 ꢞ†ꢐꢂƒ·9pꢄ8o3¬ꢆ RAID ꢋꢌꢐsꢎNꢑ 32
ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰9ꢈBmQꢑꢈnJ()ꢝ*
3-4
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
•
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 6 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂ Ÿ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
PowerEdge 2450 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$RꢏS3ꢁT%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&
'/012ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGH
IꢆJKꢑLꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄꢘꢙꢕꢚꢆ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(I
PCI ꢙs†ꢐꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
•
PCI ,ꢙ
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1 ² 3 ꢃ 32 ꢞ†ꢐ 33 MHz ꢂꢝ*
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ
—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
Giganet cLAN ZžOꢃꢄPCI ꢙs†ꢐ 1 )Iꢃ 2 6‡„ˆ‰ mQꢑꢈn
J()ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
3-5
•
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 2 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂDRAC ꢑꢛꢜꢝ ¶€hƒ klꢃꢄPCI ꢙs†ꢐꢆ 1 76¸¹ꢙꢐꢔꢎ-
ꢜꢆ PERC 3/DC RAID ꢋꢌꢐsꢎNꢑ‡„ˆ‰ mQhꢂ—)ꢝ*
Ÿ
WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
PowerEdge 2500 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$RꢏS3ꢁT%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&
'/012ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGH
IꢆJKꢑLꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(I PCI ꢙs†ꢐ
ꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
PCI ,ꢙ
—
—
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 6 ꢈꢉꢊ 7 ꢃ 32 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 2: PCI ꢙs†ꢐ 3ꢄ4ꢄꢈꢉꢊ 5 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 3: PCI ꢙs†ꢐ 1 ꢈꢉꢊ 2 ꢃ 64 ꢞ†ꢐ 66 MHz ꢂꢝ*
•
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ
—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
Giganet cLAN ZžOꢃ PCI ꢙs†ꢐ 3ꢄ4ꢄ5ꢄ6 6‡„ˆ‰ mQꢑꢈn
J()ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
3-6
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
•
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 7 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂ Ÿ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
PowerEdge 2550 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$RꢏS3ꢁT%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&
'/012ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGH
IꢆJKꢑLꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(I PCI ꢙs†ꢐ
ꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
•
PCI ,ꢙ
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1ꢄ2ꢄꢈꢉꢊ 3 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ
—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
—
DRAC ꢑ³jꢛꢜ(9ꢈ¢oꢄ´µpꢛꢜꢝ ¶€hF8klꢃꢄRAID ꢋ
ꢌꢐsꢎNh 64 ꢞ†ꢐꢂƒ·9pꢄ8o3¬ꢆ RAID ꢋꢌꢐsꢎNꢑ 32
ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰9ꢈBmQꢑꢈnJ()ꢝ*
•
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃꢄ64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ(
)ꢝ*
DRAC
PCI ꢙs†ꢐ 2 ꢃꢒžꢘºꢌꢆ DRAC Qꢆ[ꢌOwYꢎꢙ»ꢜꢂꢝ*
—
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
3-7
ꢀꢁꢂŸ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
PowerEdge 4400 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&'/012
ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGHIꢆJKꢑ
LꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄꢘꢙꢕꢚꢆ PCI ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(
I PCI ꢙs†ꢐꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
PCI ,ꢙ
—
—
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1 ꢈꢉꢊ 2 ꢃ 64 ꢞ†ꢐ 33/66 MHz ꢂꢝ*
PCI ,ꢙ 2: PCI ꢙs†ꢐ 3 ² 6 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 3: PCI ꢙs†ꢐ 7 ꢃ 32 ꢞ†ꢐ 33 MHz ꢂꢝ*
•
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ 64 ꢞ†ꢐ 33 MHz )Iꢃ 32 ꢞ†ꢐ
33 MHz ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
•
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃꢄ64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ(
)ꢝ*
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 7 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂŸ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
3-8
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
PowerEdge 6400 ꢔꢕꢖ 6450 ꢗꢇꢘꢙꢀꢚꢆꢛꢄꢜꢝꢃꢙꢁ
ꢂꢃꢄꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&'/012
ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGHIꢆJKꢑ
LꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄꢘꢙꢕꢚꢆ PCI ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(
I PCI ꢙs†ꢐꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
PCI ,ꢙ
—
—
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1 ꢃ 32 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 2: PCI ꢙs†ꢐ 2 ² 5 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 3: PCI ꢙs†ꢐ 6 ꢈꢉꢊ 7 ꢃ 64 ꢞ†ꢐ 33/66 MHz ꢂꢝ*
•
RAID ꢋꢌꢐsꢎN
—
RAID ꢋꢌꢐsꢎNꢃ•–ꢆ 32 ꢞ†ꢐ 33 MHz )Iꢃ 64 ꢞ†ꢐ 33-MHz ꢆ
PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ PCI ,ꢙ6‡
„ˆ‰ mQꢑꢈnJ()ꢝ*
•
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 1 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂ Ÿ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
3-9
PowerEdge 8450 ꢅꢆꢇ ꢈꢃꢉꢊꢋꢌꢍꢎꢏꢐꢑꢀꢒꢓ
ꢀꢁꢂꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢍꢁꢎꢏꢐꢑꢒꢉꢓꢔꢁꢕꢖꢗꢘꢙꢚꢛꢜꢝ
ꢚ! "#$%ꢖ&'()ꢆ*+ꢑꢛꢜ,-ꢋ.PowerEdge %ꢖ&'/012
ꢎ3ꢅ4ꢆ567-89::ꢓ;<ꢓ=ꢆ>?@ꢑABCDꢋEFGHIꢆJKꢑ
LꢜMNꢑOPCD<;Q:$
RSꢆ‘?ꢃꢄꢘꢙꢕꢚꢆ PCI ,ꢙꢄRAID ꢋꢌꢐsꢎNꢄNICꢄDRAC 2 6’“(
I PCI ꢙs†ꢐꢆ‹„Œ9$%ꢑ)QJIpꢆꢂꢝ*
•
PCI ,ꢙ
—
—
—
—
PCI ,ꢙ 1: PCI ꢙs†ꢐ 1 ꢈꢉꢊ 2 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 2: PCI ꢙs†ꢐ 3 ² 6 ꢃ 64 ꢞ†ꢐ 33 MHz ꢂꢝ*
PCI ,ꢙ 3: PCI ꢙs†ꢐ 7 ꢈꢉꢊ 8 ꢃ 64 ꢞ†ꢐ 33/66 MHz ꢂꢝ*
PCI ,ꢙ 4: PCI ꢙs†ꢐ 9 ꢈꢉꢊ 10 ꢃ 64 ꢞ†ꢐ 33/66 MHz ꢂꢝ*
•
RAID ꢋꢌꢐsꢎN
—
—
—
+ꢎ,ꢆd¼WN[¡ꢜꢆ RAID ꢋꢌꢐsꢎNꢃ PCI ꢙs†ꢐ 1 6‡„ˆ
‰9BC28*
½ꢜ RAID ꢋꢌꢐsꢎNꢃ”898 •–ꢆ 64 ꢞ†ꢐ 33 MHz )Iꢃ 32
ꢞ†ꢐ 33 MHz ꢆ PCI ꢙs†ꢐ6‡„ˆ‰9BC28*
Žꢆ RAID ꢋꢌꢐsꢎNꢑꢛꢜꢝ klꢄꢙs†ꢐ6”—hƒ3˜ꢄꢘ
ꢙꢕꢚꢆ™šꢑ›œꢝ IJ6 RAID ꢋꢌꢐsꢎNꢑꢆ 64 ꢞ†ꢐ PCI
,ꢙ6‡„ˆ‰ mQꢑꢈnJ()ꢝ*
•
•
NIC
—
NIC ꢃ”898 •–ꢆ PCI ꢙs†ꢐ6‡„ˆ‰ mQhꢂ—)ꢝ*
—
Giganet cLAN ZžOꢃ 64 ꢞ†ꢐꢙs†ꢐ6‡„ˆ‰ mQꢑꢈnJ()
ꢝ*
DRAC
—
³j DRAC ꢑꢛꢜ(98 ¬ꢄ´µꢛꢜꢝ ¶€hƒ klꢃꢄPCI
s†ꢐ 2 6‡„ˆ‰9BC28*
ꢙ
ꢀꢁꢂŸ WN[¡6‡„ˆ‰¢3I SCSI )Iꢃ RAID ꢋꢌꢐsꢎNh"£6£¤
¥23 ꢉ¦6ꢝ 6ꢃꢄPCI ,ꢙꢆꢙ§¨ꢌ^©ꢑª«ꢝ ¬ (BIOS hm
ꢆg-ꢑ+ꢍꢎꢐꢝ kl )ꢄ)Iꢃ RAIDꢄNICꢄDRAC ꢆ^©ꢑª«()
ꢝ*m¦ꢝ mQꢂꢄŸ WN[¡6®¯F^©ꢂ°±ꢑˆ‰ mQhꢂ—
)ꢝ*
3-10 Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ
PowerEdge Cluster SE300 ꢀꢁꢂ SL300 ꢈꢉꢊ
ꢋꢌꢍꢎꢏꢐ
mꢆ45¾ꢐv†Mꢙꢜ¿ꢃꢄ[ꢌꢙꢐꢎ\ÀŒÁh‘MNꢙOꢋꢌꢍꢎꢏꢌꢐꢆ
VꢎWXYZ6=ꢝ ‚F$%ꢑDÃꢂ— ꢉ¦6ꢄMNꢙOeꢎWÄN†Mꢆ
ÅÆ6Ç„ˆ‰9ꢈBpꢆꢂꢝ*Dell 6ꢕMÈÉ\+ꢍꢎꢐꢑÊËꢝ !ꢃꢄmꢆ
ꢜ¿ꢆꢋÌꢎꢑo<ꢜ–BC28*
45¾ꢐv†Mꢙꢜ¿6ꢃꢄꢅꢆ$%ꢑDÃ(9BC28*
•
•
•
•
•
MNꢙOÍꢄ[ꢌꢙꢐꢎ\ÀŒÁꢄ[ꢌꢙꢐꢎ\ÎꢄÏ–Ð?
MNꢙO+ꢎ,ꢆ$%
‘ꢙꢐꢔꢎ-Zꢔ[6’ꢝ ꢙꢐꢔꢎ-Zꢔ[ꢆdÑ
‘MNꢙOꢋꢌꢍꢎꢏꢌꢐꢆ+ꢎꢞꢙOꢗ$%
‘MNꢙOeꢎWꢆ PCI ꢙs†ꢐ°±ꢄ‘ꢙs†ꢐꢆÒÓꢄ‘ꢙs†ꢐ6‡„
ˆ‰¢3IZžOꢄ‡„ˆ‰¢3I‘ZžOꢆꢜÔ
support.dell.com
Cluster SE300 ꢀꢁꢂ SL300 ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌ 3-11
|