Samsung DVR 450 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Introduction····························································································································································2  
Product warranty and limits of responsibility····························································································2  
Chapter 1. Safety Cautions·······························································································································5  
Chapter 2. Summary············································································································································7  
2.1 Features ·····························································································································································7  
2.2 Contents····························································································································································9  
2.2.1 Control panel on the front ··················································································································9  
2.2.2 Rear Connection terminals ···············································································································12  
2.2.3 Remote controller·································································································································13  
2.3 Specification···············································································································································13  
Chapter 3. installation·······································································································································18  
3.1 How to connect all parts···························································································································18  
3.2 Detailed connection···································································································································19  
3.2.1 Camera······················································································································································19  
3.2.2 Audio·························································································································································19  
3.2.3 Monitor·····················································································································································20  
3.2.4 External connector·······························································································································21  
Chapter 4. Operating·········································································································································25  
4.1 Checklist before operation·······················································································································25  
4.2 Power connection········································································································································26  
4.3 Live monitoring screen······························································································································26  
4.3.1 Function of screen display····················································································································27  
4.3.2 Automatic channel rotation·················································································································27  
4.4 Recording························································································································································28  
4.4.1 Normal recording ·································································································································28  
4.4.2 Scheduled recording···························································································································28  
4.5 Search·······························································································································································29  
4.5.1 Event search············································································································································29  
4.5.2 Timeline search······································································································································29  
4.5.3 Go To search············································································································································30  
4.5.4 Go first search ········································································································································30  
4.5.5 Go last search·········································································································································30  
4.5.6 Log file search········································································································································31  
4.5.7 COPY List··················································································································································31  
4.6 Playback···························································································································································33  
4.7 PTZ·····································································································································································33  
4.7.1 PAN/TILT ···················································································································································34  
4.7.2 ZOOM/FOCUS········································································································································34  
4.7.3 INITIALIZE·················································································································································34  
4.8 DVR Backup File Player ······························································································································35  
Chapter 5. Configuration ·································································································································37  
5.1 Menu configuration····································································································································37  
5.2 Default Setup ················································································································································39  
Digital Video Recorder  
User’s Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
5.3 Menu Screen Setup·····································································································································42  
5.4 SCREEN SETUP ··············································································································································43  
5.4.1 CH1~CH4 / CH1~CH9 (for SVR-940)······························································································43  
5.4.2 AUTO SEQUENCE ··································································································································44  
5.4.3 STATUS DISPLAY····································································································································44  
5.4.4 SPOT···························································································································································45  
5.5 RECORD SETUP ·············································································································································46  
5.5.1 GENERAL SETUP····································································································································46  
5.5.2 DETAIL SETUP········································································································································47  
5.6 EVENT SETUP·················································································································································48  
5.6.1 EVENT························································································································································48  
5.6.2 MOTION DETECTION···························································································································49  
5.6.3 TEXT ···························································································································································49  
5.6.4 POS quick guide····································································································································50  
5.6.5 RELAY·························································································································································51  
5.7 NETWORK ·······················································································································································52  
5.7.1 NETWORK················································································································································52  
5.7.2 DDNS Register········································································································································52  
5.7.3 Client access ···········································································································································53  
5.7.4 RS-232·······················································································································································54  
5.7.5 RS-422/485··············································································································································54  
5.7.6 E-MAIL·······················································································································································54  
5.8 DDNS Registration·······································································································································55  
5.8.1. DDNS Registration procedure ········································································································55  
5.9. Instructions on using DDNS ···················································································································59  
5.10 Editing registered product ····················································································································61  
5.11 System setting············································································································································62  
5.11.1 System····················································································································································62  
5.11.2 HDD·························································································································································63  
5.11.3 Password ···············································································································································64  
5.11.4 User Authentication··························································································································64  
5.11.5 CLOCK SETUP·······································································································································65  
5.12 PTZ ·································································································································································67  
5.12.1 Setting for each channel ·················································································································67  
5.13 EXIT MENU ···················································································································································67  
5.14 ETC ··································································································································································68  
5.14.1 Firmware Upgrade·····························································································································68  
5.14.2 Index Start Fail·····································································································································69  
Chapter 6. Web-Viewer·····································································································································70  
6.1 Log page ·························································································································································71  
6.2 LIVE mode·······················································································································································71  
6.3 SEARCH mode···············································································································································73  
6.4 Web-Viewer buttons···································································································································74  
Chapter 7. Troubleshooting····························································································································76  
Appendix Information of HDD Installation··························································································78  
Digital Video Recorder  
User’s Manual  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1. Safety Cautions  
Symbols displayed for each item  
Referstoinformationusersneedtoknowinordertopreventseriousinjuryor  
death.  
Warning  
Providesinformationusersneedtoknowinordertopreventminorinjuryor  
product damage.  
Caution  
• Before installation  
- Verify the supplied voltage (AC100V~AC240V) before connecting the power supply.  
- Make sure the power supply is off before installation.  
- Do not install in a very humid environment. Doing so may cause an electric shock or fire.  
- Make sure ground line is connected to reduce electric shock risk.  
• During operation  
- Donotopentheproductcoverexceptqualifiedpersonnelorsysteminstaller.Openingtheproductcovermay  
cause an electric shock.  
- Do not plug multiple appliances into one power outlet. Doing so may cause fire.  
-Donotplacedishescontainingwaterorheavyobjectsontheproduct.Doingsomaycauseamalfunction.  
- Donotuseinareascontaininginflammablematerialslikepropanegasandgasolineorinareasthatgenerate  
dust. Doing so may cause an explosion or fire.  
- Do not touch the power line with a wet hand. Doing so may cause an electric shock.  
- Do not insert a hand into the opening of the DVD. Doing so may cause an injury.  
- Make sure conduction materials do not enter the cooling ventilator opening.  
- Donotapplyexcessiveforcewhenpullingonthepowercord.Damagingthecordmaycauseanelectricshock  
or fire.  
- Random replacement of built-in battery by other types of batteries may cause explosion.  
- The battery shall be replaced by the same battery.  
- The used batteries shall be disposed carefully because they can cause environment pollutions.  
• Dismantling and cleaning  
- Donotdismantle,repairormodifytheproductdeliberately.Doingsomaycauseadamage,anelectricshockor  
an injury.  
- Donotusewater,thinnerororganicsolventforcleaningtheproductexterior.Doingsomaycauseamalfunction  
or an electric shock. Use a dry cloth to clean the exterior.  
• During installation  
- Togetadequateventilation,installtheproductwithatleast15cmofspacebetweenthecoolingventilation  
opening and a wall.  
- Topreventfalling,installtheproductinaflatarea.Droppingtheproductmaycauseaninjuryoramalfunc-  
tion.  
- Avoid areas exposed to sun light or heat since they may cause deformation or a malfunction.  
- IfacameraisinstalledwhiletheDVRisrecording,imageinanotherchannelmaybedisrupted.Startthestorage  
after installing the camera is recommended.  
Digital Video Recorder  
User’s Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1. Safety Cautions  
• During use  
- Make sure the product is not exposed to shocks or shaking when using the product or during moving.  
-Donotmovetheproductwhileitisinoperation,andapplystrongshockstotheproductorthrowtheproduct.  
- Ifharddiskdrivesotherthanthoserecommendedareusedadditionally,abnormaloperationmayoccur.Inquire  
at the point of purchase of the product before installing such a hard disk drive.  
- Product warranty will not cover deliberate additional use of such hard disk drives.  
- Thisproductisasupplementaryratherthanprimarymeansforpreventingfireandtheft.Ourcompanyisnot  
responsible for incidence of incident or damage that may occur.  
FCC Compliance Statement  
Caution : Anychangesormodificationinconstructionofthisdevicewhicharenotexpresslyapprovedthe  
party responsible for compliance could void the user’s authority to operate the equipment.  
NOTE : ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursu-  
anttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst  
harmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipment  
generates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance  
withtheinstructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationof  
thisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcausetheuserwill  
be required to correct the interference at his own expense.  
Samsung Techwin cares for the environment at all product manufactur-  
ing stages to preserve the environment, and is taking  
provide customers with more environment-friendly products.The Eco mark  
represents Samsung Techwin will to create environment-friendly products,  
and indicates that the product satisfies the EU RoHS Directive.  
a
number of steps to  
s
Digital Video Recorder  
User’s Manual  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
TheSamsungSVR-940/SVR-450isadigitalvideorecorderdesignedtobeusedasasecuritydevice  
insmallshops,conveniencestores,banks,ATMs,etc.Itisastand-alonedevice,securingsystemper-  
formanceandsafety.TheSamsungSVR-940/SVR-450savesvideoimagesonanHDDinsteadofon  
videotape.Itcansavequalityimagesevenwithrepeatedrecording,andfacilitatesdatasearchby  
recordingandplayingvideodatainadigitalfileformat.Moreover,theSamsungSVR-940/SVR-450is  
auser-orienteddigitalunitwithhighqualitymovingpicturesandhighcapacitystoragemedia.Ithas  
avarietyoffunctionssuchasmotiondetection,PTZ(Pan,TiltandZoom)control,passwordsetting,  
real-time voice data storage, and event lists and log file storage.  
2.1 Features  
Monitoring Screen  
Recording  
TheSamsungSVR-940/SVR-450canrecordupto120framespersecond.Italsorecordseventsonan  
event list as well as providing a pre-event recording function.  
. Simultaneous execution of three functions: recording, playback, and networking  
. Convenient setting of recording frame by channel.  
. Up to 3 levels of image quality setting available.  
. Simple setting of the scope of motion detection.  
. Recording setting up to a Maximum 120 frames per second. (Based on 360X240)  
. Manual and scheduled recording.  
. Event recording using external alarms and the motion detection function.  
. Creating event lists for external alarms and motion detection.  
. Recording images before the occurrence of events.  
Playback  
Digital Video Recorder  
User’s Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
Storage Media  
Thebuilt-inHDDisthebasicmemorysupply.UsingaUSBmemorystickorexternalCD-RW(guaranteed  
for the recommended models only), users can copy images from the internal HDD.  
. Basic Memory Supply: Built-in HDD  
. Backup media: USB memory stick  
. Backup media: Built-in CD-RW  
• CD-RW-Maker : LITEON CO., LTD  
Model : LTR-52327SX  
Model : SHM-165P6SX02C  
• CD MEDIA-Maker : SAMSUNG  
Model:PLEOMAXR80X5210SJ  
Network  
TheSamsungSVR-940/SVR-450supportsawiderangeofnetworkssuchasLANandADSL,DHCP.The  
usercanalsoeasilyoperateandmanagethemainfunctionsoftheunitfromaremotelocationusingan  
exclusive PC viewer.  
. Liveimageviewfromaremotelocationavailable(fullscreen,quadscreen,and9-channelscreenmode  
(for SVR-940) selectable).  
. Search and playback by time or event from a remote location.  
. 10/100Mbps Ethernet/xDSL supported.  
. DDNS supported.  
Other  
. Simple firmware upgrade using USB memory.  
. Up to 4 channel voice recording in real time  
. VGA output supported  
. Menu language-selectable.  
Digital Video Recorder  
User’s Manual  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
2.2 Contents  
TheSVR-940/SVR-450packagecontainsthemainunitanditscomponentsasspecifiedbelow.When  
youpurchasetheunit,pleasecheckthatthecomponentsspecifiedbelowareincluded.Ifanycompo-  
nents are missing, please contact your local vendor.  
SVR-450/940 Main unit  
1. Network viewer program CD  
2. User Manual  
3. Remote controller  
4. Batteries for remote controller  
5. Adaptor (For SVR-450)  
9. Power cable  
2.2.1 Control panel on the front  
Digital Video Recorder  
User’s Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
LED Indication  
Number  
LED Name  
Description  
1
Lights up when power is applied to the system  
2
3
4
5
6
Lights up when the system is backing up.  
Lights up when an Alarm is triggered.  
Lightsupwhenclienthasconnectedtothesystemthroughthe  
Network  
Lights up when the system is accessing HDD  
Lights up when the system is recording video data  
Button Indication  
Number  
Button Name  
Description  
1
Press to power the system ON/OFF.  
2
3
4
5
6
Press to navigate to and select a Menu item.  
Presstoselectandchangetheforwardorbackplayback.Pressing  
thisbuttonduringforwardplaybackreversesthedirectionofplay.  
Forward Playback. Speeds of 2X, 4X, 8X.  
PresstostopthePlaybackandtostartsearchingotherrecorded  
data.  
Press to Play and pause the Playback screen  
Digital Video Recorder  
User’s Manual  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
ButtonIndication  
Number  
Button Name  
Description  
7
Playbackpositionmoves1frameforward/backduringPause.  
8
Press to start and stop manual recording  
9
Press to search the recorded data  
Press to launch Setup Menu  
10  
11  
12  
13  
14  
15  
16  
Press to control the PTZ functions  
Press to backup still images or video  
PresstostartscreenAutoSequence.Set°ÆSCREENSETUP/AUTO  
SEQUENCE/SEQUENCE°Ø as °ÆON°Ø.  
Presstoselectthelivedisplayformatasfullscreen,quadscreen,or  
9-channel screen (for SVR-940) display.  
Press to return to previous Menu screen.  
Press to move up in a Menu item in setup mode.  
17  
18  
19  
Press to move right in a Menu item in setup mode.  
Press to move down in a Menu item in setup mode.  
Press to move left in a Menu item in setup mode.  
Presstoselectfullscreen, quadscreen,or9-channelscreen(for  
SVR-940)inlivemonitoringmode.Itcanalsobeusedtoselecta  
desired menu item or to store a setup value in the menu.  
20  
21  
USB Backup and Firmware upgrade.  
Digital Video Recorder  
User’s Manual  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
2.2.2 Rear Connection terminals  
Rear panel of SVR-450  
Rear panel of SVR-940  
1. VIDEO IN  
2. AUDIO IN  
Camera Input (NTSC/PAL)  
Audio Input  
3. AUDIO OUT Audio Output  
4. VIDEO OUT Composite Video Output  
5. VGA  
VGA output  
6. RS-232  
7. LAN  
For the engineering console only, not for other purposes.  
RJ45 Connector  
8. RS-485/422 PTZ camera control  
9. SENSOR IN Sensor Input  
10. ALARM OUT Alarm Output  
11. SWITCHES NTSC/PAL, BNC/VGA Select Switch(Please refer to Chapter 5 for the detailed  
guide.)  
12. SPOT  
13. SVHS  
Spot output (For SVR-940)  
S-VHS output  
Digital Video Recorder  
User’s Manual  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
2.2.3 Remote controller  
• MENU  
Button to enter Setup Menu  
For Auto Sequence  
• AUTO  
• SPOT  
• PTZ  
Button for Spot ON/OFF (SVR-940.)  
Button for PTZ camera control.  
Button for data backup.  
• COPY  
• RECORD  
• STOP  
• SEARCH  
• STEP  
Button for Manual record ON/OFF.  
Button to stop playback.  
Button for search menu.  
Playbackpositionmoves1frameforward/backduring  
Pause.  
• PLAY/PAUSE Button to Play and Pause the Playback screen  
• FAST  
• DIR  
Button for Forward Playback. Speeds of 2X, 4X, 8X.  
Buttontoselectandchangethedirectionofplayin  
playback.Whenpressedduringforwardplayback,  
the system reverses the direction of play.  
Buttontoselectfullscreen,quadscreen,or9-channel  
screen (for SVR-940) in live monitoring mode.  
Itcanalsobeusedtoselectadesiredmenuitemor  
to store a setup value in the menu.  
Buttontoselectthelivedisplayformatasfullscreen,  
quad screen, or 9-channel screen (for SVR-940)  
display.  
Button to return to the previous Menu screen.  
Button to set Remote controller ID / Password /  
IP setting. Only 0 to 9 is available for the remote  
controller ID.  
• ENTER  
• MULTI  
• ESC  
• 0~9  
Usable range of Remote Controller  
2.3 Specification  
System  
Items  
SVR-450  
SVR-940  
Processor  
DSP  
RTOS  
Operating system (O/S)  
Compression method  
MPEG-4  
Digital Video Recorder  
User’s Manual  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
Video  
Items  
Input Method  
SVR-450  
SVR-940  
Composite Input 4-Channel Composite Input 9-Channel  
1.0 Vp-p, Composite  
Video Input Level  
Live Screen Display Speed  
Real time display  
NTSC: 720 (W) _ 480 (H) Pixels for the full screen.  
PAL: 720 (W) _ 576 (H) Pixels for the full screen  
8bit Brightness (256 Gray Scale)  
Live Screen  
24bit Color (160,000 Colors)  
1.0Vp-p Composite, 75Ω /  
Monitor Output  
VGA Output  
1.0Vp-p Composite, 75Ω  
S-VHS  
RGB Output (Non-Interlaced Scan)  
* Select composite or VGA  
Audio  
Items  
SVR-450  
SVR-940  
4CH Audio Input  
1CH Audio Output  
Audio  
Audio compression  
ADPCM  
Alarm  
Items  
Input  
SVR-450  
SVR-940  
9 Channels  
4 Channels  
Output  
1 Relay output  
4 Relay output  
Control  
Items  
SVR-450  
SVR-940  
Remote controller  
Exclusive controller  
Infrared LED (Up to 5m)  
SCC-3100A (RS-485)  
Digital Video Recorder  
User’s Manual  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
Recording  
Items  
SVR-450  
SVR-940  
MaximumNumberofFrames  
Sec per Resolution  
(NTSC)  
720X480: 30 Frames/Sec  
720X240 : 60 Frames/Sec  
360X240: 120 Frames/Sec  
720X480: 30 Frames/Sec  
360X240: 120 Frames/Sec  
Recording Method  
Pre-Event Recording  
Image Quality  
3 Types of Recording Mode: General, Schedule, & Event  
Individual Channel ON/OFF Setting  
3-Stage Image Quality: User Configurable  
HDD  
Items  
SVR-450  
SVR-940  
Default HDD  
1 ea (Max. 1ea)  
1 ea (Max. 2ea)  
HDD type  
RPM  
Recommended  
EIDE  
7200rpm  
Samsung / Seagate / Maxtor  
Notes  
• Please refer to the recommended HDD model list.  
Backup  
Items  
SVR-450  
SVR-940  
Digital Backup  
USB Memory Stick / Built-in CD-RW (DVD)  
Password  
Items  
6 stage Password  
SVR-450  
SVR-940  
4-digit Password (including four numbers)  
Admin : Control all function (Default is 1111)  
USER1~5: Access permission per option (Default is 1111)  
Digital Video Recorder  
User’s Manual  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
Search and Playback  
Items  
SVR-450  
SVR-940  
Search by Time: Year, Month, Date, Hour, Minute  
Search by Channel: per channel  
Search by Event: Alarm, Motion Detect  
Search Mode  
Search by the oldest data: The first recording image  
Search by the most recent data: The last recording image  
Search by bar: Using the search bar  
Speed&directionofPlayback  
Fast Search  
Forward and Reverse  
Rewind (X2, X4, X8), Rewind (X2, X4, X8)  
Search in 1 second increments  
STEP Search  
Pause and Frame Playback  
Playback pause, Playback by frame in the pause status  
Network  
Items  
SVR-450  
SVR-940  
Live Screen: Monitoring  
Playback Screen: Search  
Menu Setting: Menu setting available (CMS S/W : option)  
Access Method: Dedicated Viewer  
General  
Protocol: TCP/IP, DHCP  
Interface: Ethernet (10/100Mbps), ADSL  
Concurrent Users: Up to 4 users (depending on the network  
environment)  
CPU:PentiumIV1.2GHzorover(2.0GHzoroverrecommended)  
Memory: 256MB or over (512MB or over recommended)  
HDD: Minimum 10GB or over  
PC Requirements  
OS: Windows 2000 or later recommended  
Monitor: 1,024_768 Pixels  
LAN Interface: 10/100 Base-T (RJ-45)  
Electrical Specification  
Items  
Power  
SVR-450  
DC 12V Adaptor (SVR-450) 100~127V/200~240V,50/60Hz  
Approx. 25W 65W  
SVR-940  
Power Consumption  
Digital Video Recorder  
User’s Manual  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Summary  
UserEnvironment  
Items  
SVR-450  
SVR-940  
Operating Temperature  
Storage Temperature  
Humidity  
5˚C~ 40˚C  
10˚C~60˚C  
30% ~90%(without dewfall)  
Exterior  
Items  
SVR-450  
SVR-940  
Material  
Dimensions  
Steel Case  
260(W) X 350(D) X 65(H)mm  
Weight  
About 5.5Kg  
11Kg  
ConnectionTerminals  
Items  
SVR-450  
SVR-940  
Video Input  
BNC(4EA)  
BNC(9EA)  
Loop out (9EA), Spot (1EA)  
S-VHS  
Monitor Output  
BNC(1EA)  
VGA Output (PC Monitor)  
Audio Jack  
USB Port  
15-Pin DSUB  
RCA Input (4), RCA Output (1)  
USB2.0 (Firmware Upgrade/Copy)  
9-Pin DSUB  
RS-232C (Standby)  
RS-422/485 (External control, PTZ)  
6-Pin Terminal sector  
8-Pin Terminal sector  
2-Pin Terminal sector  
Termination Switch (JP2  
Termination)  
Alarm Input Terminal  
Alarm OutputTerminal (Motion Detect, Sensor: CM, NO, NC)  
RS-422/485TerminalResistanceSwitch(RS-422/485termination  
can be set using jump setting after opening the top cover)  
RJ-45(Network)  
LAN Input  
AC / DC Input  
12v AC Adaptor  
AC110V~240V  
Accessories  
Items  
SVR-450  
SVR-940  
Network Viewer Program CD  
User Manual  
Remote Control & Battery  
Accessories to be supplied  
Brackets and screws for HDD plate  
Adaptor (for SVR-450), Power cable  
Digital Video Recorder  
User’s Manual  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
3.1 How to connect all parts  
The connection layouts for the SVR-450/940 with the monitor, CCTV, and external devices are  
described as below.  
SVR-450  
SVR-940  
Digital Video Recorder  
User’s Manual  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
3.2 Detailed connection  
3.2.1 Camera  
TheSVR-450and950canaccommodateupto4or9camerasrespectively.ConnecttheBNCtermi-  
nal of each camera to the CAMERA IN terminal of the unit.  
SVR-450  
SVR-940  
3.2.2 Audio  
TheSVR-450/950cansaveaudioinformation.Forstorageoroutputofaudioinformation,itisrequired  
to connect the relevant devices.  
SVR-450  
Digital Video Recorder  
User’s Manual  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
SVR-940  
Audio input  
PleaseconnectanRCAaudiocabletotheAUDIOINconnector(suchascamerawithbuilt-inmicrophone  
and others). (All types of microphone and speaker are compatible with the system.)  
• For Audio input setting, set [Audio] to [ON] in the Recording setting menu  
Notes  
PleaseconnectanRCAaudiocabletotheAUDIOOUTPUTconnector(suchasmonitorwithbuilt-inspeak-  
ers).  
• Whenplaybackwithaudioinsplitdisplaymodeisnotworkingproperly,turnthe  
display mode to Full screen to avoid an audio playback problem.  
Notes  
3.2.3 Monitor  
ConnecttheVIDEOOUTterminalofthesystemandtheBNCterminalofthemonitor,usingtheBNC  
cable,inordertodisplayvideodatatothemainmonitor.ThereisalsoaVGAvideooutputforthePC  
monitor.  
SVR-450  
Digital Video Recorder  
User’s Manual  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
SVR-940  
• TheVideooutputandtheVGAoutputcannotbeusedatthesametimeandthe  
systemcansendonlyonevideooutatthesametime.PleaserefertoChapter4.1  
Checklist before operation for the setting of monitor selection.  
• DuringplaybackwiththeVGAmonitor,afewframescansometimesbemissingbut  
this is not a defect of the unit.  
Caution  
3.2.4 External connector  
Sensor input (SENSOR IN)  
SVR-450 (4-SENDOR IN)  
SVR-940 (9-SENDOR IN)  
Asexternalsensorconnectingterminal,signalsfromanexternalsensorordevicewillbeinputtothesystem.  
Relay Output (RELAY OUT)  
ThisAlarmOutputterminalusesthecontactrelayforthealarmoutputtoexternaldevices.Youcanselect  
NO (Normal Open) or NC (Normal Close) for connection according to the contact point status.  
Digital Video Recorder  
User’s Manual  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
SVR-450(1-ALARMOUT)  
SVR-940(4-ALARMOUT)  
• TheoperationofeachrelayoutputcanbedefinedbyacombinationofMotionDetect,  
andSensorintheEventSettingontheMainMenu.SeeParagraph4.5.3CH1~CH4  
Relay Setting for details  
Notes  
External Control Device Terminal (RS-422/485)  
Thisterminalisconnectedtoexternalcontroldevices.TheinternalJP2terminationterminalturnsthe  
terminator resistance of the RS-422/485 communication device on and off.  
(In the SWITCH section on the back of the SVR-940 there is a TERM switch.)  
SVR-450  
1. RS-422 : Connecting Terminal Block's 4 Port orderly  
2. RS-485 : ShorttheTerminalBlock's1&3(Tx+Rx+)Ports,and2&4ports(Tx-,Rx-),thenconnecting  
1 & 2 ports or 3 & 4 ports to RS-485  
Digital Video Recorder  
User’s Manual  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
SVR-940  
1. RS-422 : Connecting Terminal Block's 4 Port orderly  
2. RS-485 : Connecting 3 & 4 ports to RS-485  
No.  
Description  
Classification  
RS-422  
RS-485  
1
2
3
4
TX+(+Transmit Data)  
TX-(- Transmit Data)  
RX+(+Receive Data)  
RX-(- Receive Data)  
-
-
Data+  
Data-  
LAN Connection (Ethernet 10/100 Base-T)  
This port is to connect to network.  
SVR-450  
Digital Video Recorder  
User’s Manual  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
SVR-940  
No.  
1
Description  
No.  
5
Description  
TX+(Transmit Data)  
TX-(Transmit Data)  
RX+(Transmit Data)  
N/C(No connection)  
N/C(No connection)  
RX-(Receive Data)  
N/C(No connection)  
N/C(No connection)  
2
6
3
7
4
8
Monitor Output (VGA)  
This is the output connector for a VGA Monitor.  
SVR-450  
SVR-940  
Digital Video Recorder  
User’s Manual  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installation  
No.  
1
Description  
Red Signal (75, 0.7Vp-p)  
Green Signal (75, 0.7Vp-p)  
Blue Signal (75, 0.7Vp-p)  
N/C(No connection)  
Ground  
No.  
9
Description  
N/C(No connection)  
Ground  
2
10  
11  
12  
13  
14  
15  
3
Ground  
4
N/C(No connection)  
HSYNC(HorizontalSynchronization)  
VSYNC (Vertical Synchronization)  
N/C(No connection)  
5
6
Ground  
7
Ground  
8
Ground  
Chapter 4. Operating  
4.1 Checklist before operation  
Usersmustselectthevideomode(NTSCorPAL)andvideooutput(BNCorVGA)beforepoweringthe  
system on. These can be selected from the switches on the rear of the DVR system.  
The settings of the video mode and video output are as described below.  
Video mode  
Video output  
SETTING  
NTSC  
PAL  
BNC  
VGA  
O
X
O
X
X
O
O
X
Digital Video Recorder  
User’s Manual  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
Video mode  
Video output  
SETTING  
NTSC  
PAL  
BNC  
VGA  
O
X
X
O
Factory Default  
X
O
X
O
* The factory default is set to NTSC video mode and VGA video output.  
4.2 Power connection  
· After power is connected to the rear connector of the system, the system will be powered on.  
· When power is turned on, the system will detect a video signal automatically.  
· Despite of a power failure, all the setting values will preserve.  
4.3 Live monitoring screen  
When the system is turned ON, the live monitoring screen is displayed.  
Digital Video Recorder  
User’s Manual  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4.3.1 Function of screen display  
WhenChannelnumberbuttons1~4(SVR-450)/1~9(SVR-940)arepressed,eachchannelisdis-  
played in full screen.  
Press the ENTER button, and the four connected channels are displayed in quad split screen  
4.3.2 Automatic channel rotation  
WhentheAUTObuttonispressedineachfullscreenmode,eachchannelisrotatedautomatically  
following the setting in [SCREEN SETUP] > [Auto Sequence]. (SEQUENCE must be set to [YES].)  
When AUTO is pressed again, the Auto sequence operation will be canceled.  
Digital Video Recorder  
User’s Manual  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4.4 Recording  
4.4.1 Normal recording  
WhentheRECbuttonispressed,manualrecordingisstartedandthe"R"icon(ManualRecording)is  
displayed on the upper right corner of the monitor screen.  
WhentheRECbuttonispressedagain,themanualrecordingisstoppedandthepre-recordingsetting  
isactivated.Whilerecordingwiththepre-recordingsetting,theiconsbelowindicatethetriggerfor  
recording.  
· C : CONTINUOUS RECORDING  
· S : SENSOR RECORDING  
· M : MOTION DETECTION RECORDING  
· T : TEXT RECORDING (POS TEXT RECORDING)  
· - : NO VIDEO INPUT  
· 0 : NO RECORDING  
4.4.2 Scheduled recording  
· S : SENSOR RECORDING  
· - : NO RECORDING  
· C : CONTINUOUS RECORDING  
· M : MOTION DETECTION RECORDING  
· T : TEXT RECORDING  
• Therecordingstatusiconsarechangedaccordingtothetypeofrecording.Whenthe  
correspondingchannelisnotbeingrecorded,norecordingstatusiconisdisplayed.  
Notes  
Digital Video Recorder  
User’s Manual  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4.5 Search  
PresstheSEARCHbutton,andtheSearchMenuappearsasillustratedbelow.Recordedvideocanbe  
searched and played back by time, event, or date and the Log File is also displayed.  
4.5.1 Event search  
FromtheEventSearchmenu,therecordeddatacanbesearchedbyMotiondetectionrecording,Sen-  
sor recording, Text recording, Manual recording, etc.  
When Event Search is selected, the screen below is displayed.  
· Dates with any recorded data are displayed in a dark color.  
· Whenthedate,channel,andeventtypeareselectedandthePLAYbuttonisplayed,thedesireddatais  
played back.  
4.5.2 Timeline search  
Users can easily select a desired search time using the Time line bar.  
PresstheENTERbuttonontheTimelinebartodisplaythecalendarandpresstheENTERbuttonagain  
to display as below.  
Digital Video Recorder  
User’s Manual  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
· V1~V4 : Time zones with recorded data are displayed with a colored bar. (SVR-940 : V1~V9)  
· A1~A4 : Time zones with recorded audio data are also displayed with a colored bar.  
Time zones with recorded data are displayed in colors.  
4.5.3 Go To search  
Users can enter a desired search date and time in this menu.  
Press the ENTER button to display as below.  
Users can enter a desired search date and time and press the PLAY button to playback.  
(The second setting can be input as 15 seconds/30 seconds/45 seconds.)  
4.5.4 Go first search  
Press the ENTER button to playback from the first data stored in the HDD.  
4.5.5 Go last search  
Press the ENTER button to playback from the last data stored in the HDD.  
However,duetothenatureoftherecordedfileformat,amaximumof1minuteofthelastrecorded  
can be played back.  
Digital Video Recorder  
User’s Manual  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4.5.6 Log file search  
PresstheENTERbuttononthismenutodisplaythecalendar.Selectadesireddateonthecalendarto  
display the Log files. Press the ESC button to exit this menu.  
4.5.7 COPY List  
BothStillimagesandVideocanbebackedup.ThemaximumbackuptimeforVideoisupto999seconds.  
• During backup, the system will not record, to ensure system stability.  
Notes  
4.5.7.1 Still image Backup  
① Duringmonitoring,PresstheCOPYbuttonifyouwishtocaptureanimage.WhenFigure1isdisplayed,  
pressYEStostoretheimageintotheHDDandselectthebackupdevice-eitherUSBmemorystickor  
CD-RW. The still image will be transferred to the selected backup device.  
② PresstheSEARCHbuttonandselectARCHIVEtodisplaythecalendar.Selectadesireddateandpress  
the ENTER button to display Figure 2.  
③ Selectadesiredlisttobebackedupandtheimageisdisplayed.Selectthebackupdevice-eitherUSB  
memory stick or CD-RW. When backup is completed, Figure 3 is displayed.  
Figure 1  
Figure  
2
Digital Video Recorder  
User’s Manual  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
Figure 3  
4.5.7.2 Video backup: Only available during Playback mode  
① DuringPlayback,PressthePAUSEbuttontopausetheplaybackandpresstheCOPYbutton.Youwillbeasked  
whethertostoreaStillimageorVideo(Figure1).SelectVideoandsetthedurationofthecopytostorethedatainto  
theHDD,andselectthebackupdevice-eitherUSBmemorystickorCD-RW.Selectthedevicethatyouwanttosave  
it to and it will be saved to that device.  
② PresstheSEARCHbuttonandselectARCHIVEtodisplaythecalendar.SelectadesireddateandpresstheENTER  
button to display Figure 2.  
③ Selectadesiredlisttobebackedupandtheimageisdisplayed.Selectthebackupdevice-eitherUSBmemorystick  
or CD-RW. When backup is completed, Figure 3 is displayed.  
Figure 1  
Figure  
2
Digital Video Recorder  
User’s Manual  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
Figure 3  
4.6 Playback  
REC  
Button for manual recording.  
Playback position moves 1 frame forward/back during Pause.  
Button for playback and pause.  
STEP  
PLAY/PAUSE  
STOP  
Button for stop  
FAST  
Button for fast forward.  
DIR  
Button to select and change the direction of play in playback.  
• Duringplayback,afewframesmaybemissingdependingontheimagequality,but  
this is not a defect of the unit.  
Notes  
4.7 PTZ  
PressthePTZbuttonontheselectedFullLiveScreen,andadjustthePan,Tilt,orZoomofacamera.ThePTZfunction  
canbecontrolledbythefunctionbuttonsofthefrontpanelorbytheremotecontroller.ThePTZfunctioncanbe  
controlled when a PTZ camera is correctly connected to the RS-485.  
Digital Video Recorder  
User’s Manual  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
SEARCH  
MENU  
PTZ  
COPY  
AUTO  
MULTI  
4.7.1 PAN/TILT  
Select PAN/TILT and press the ENTER button.  
- For Pan adjustment, Press the  
button  
- For Tilt adjustment, Press the  
button  
4.7.2 ZOOM/FOCUS  
Select ZOOM/FOCUS and press the ENTER button.  
- For Zoom adjustment, Press the  
button.  
- For Focus adjustment, Press the  
button  
4.7.3 INITIALIZE  
Select INITIALIZE and press the ENTER button to initialize a PTZ camera  
• Press the PTZ control button to move, and press the button again to stop.  
• The PTZ Mode is available in the Live Screen.  
Notes  
Digital Video Recorder  
User’s Manual  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4.8 DVR Backup File Player  
TheDVRprovidesanexclusivevideofileformataswellasAVIfiletype.ToplayandseetheDVR(exclusive)  
type file, you should play back this video file on our exclusive player as follow.  
(Notice: WhentheMPEG-4Codecisnotinstalled,theexclusiveplayercannotplaytheDVRformatfile.Inthis  
case,FFDSHOWCodec(ffdshow.exe)onnetworkclientsoftwareCDthatisprovidedinthepackage  
should be installed and run before the playback of the DVR format backup file.)  
FFDSHOW Setup Procedure  
Double click the [ffdshow.exe file] icon in provided CD.  
Choosethelanguageofprogram,afterthatclickthe"NEXT"  
button continuosly. (no option change)  
1. AfteryoubackupthevideodataasDVRtype,there  
are3filesontheUSBmemoryfolder.(Figure1)  
Figure 1. Backup file on USB Memory folder  
2. ClickDVR(Exclusive)Playericon  
,and  
3. Open Media File on DVR Player  
thenyoucanseethebelowplayer.(Figure2.DVR  
Player)  
Figure 2. DVR Player  
Click this button to open media file.  
Digital Video Recorder  
User’s Manual  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Operating  
4. Selectthebackupfile(DVRtype)youwishto  
5. ClicktheplaybuttontostartplaybacktheDVR  
playback  
file you selected.  
Click to start playback the selected file  
6. Overview of DVR Player  
1
2
3
4
5
6
7
8
9
Table 1. DVR Player Buttons  
Description  
No.  
1
Icon Name  
Open Media File  
Stop  
ClickthisicontoopenthemediafilesavedasDVRtype  
Click this icon to stop the playback  
2
3
Rewind  
Click this icon to move reward for 5 seconds  
Click this icon to move to the previous frame  
ClickthisicontoplaythevideodatasavedasDVRtype.  
Click this icon to pause the display screen.  
Click this icon to move to the next frame.  
Click this icon to move forward for 5 seconds  
Audio On or Off  
4
Previous Frame  
Play  
5
6
Pause  
7
Next Frame  
Forward  
8
9
Audio  
Screen Size  
0.5(Halfsize),1(Normalsize),2(Double),F(Fullscreen)  
Digital Video Recorder  
User’s Manual  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.1 Menu configuration  
PresstheMenubuttononthefrontsideoftheunitortheMENUbuttonontheremotecontrol,andthe  
menuforavarietyofsettingsrelatedtotheunitwillappear.Themenuisconfiguredasdescribedbelow.  
• The factory default language is English. See Paragraph 4.10.4 - Other Settings for  
Language setup.  
Notes  
Event setup  
Record setup  
Screen setup  
Network setup  
System setup  
The menu is configured as illustrated below.  
SCREEN  
CHANNEL – TITLE, COVERT, BRIGHTNESS, CONTRAST.  
SEQUENCE, SEQUENCE DWELL, VIDEO LOSS SKIP  
AUTO SEQUENCE  
OSD, CLOCK DISPLAY, HDD FREE SPACE, RECORD STATUS,  
TITLE DISPLAY, EVENT DISPLAY, OSD CONTRAST  
STATUS  
SPOT  
SCREEN SETUP  
RECORD SETUP  
TITLE DISPLAY, SPOT MODE (Only for SVR-940)  
IMAGE SIZE, REPEAT RECORD, WARNING MESSAGE,  
WARNING BEEP  
CHANNEL – MODE, SCHEDULE, IMAGE, FRAMERATE,  
PRE EVENT DURATION, POST EVENT DURATION, AUDIO,  
SENSOR SELECT  
GENERAL SETUP  
DETAIL SETUP  
Digital Video Recorder  
User’s Manual  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
EVENT BEEP, EVENT AUTO SEQ, EVENT TIME, TEXT MONITORING,  
SENSOR-SENSOR TYPE  
EVENT  
MOTION  
CHANNEL- MOTION ZONE, MOTION SENSITIVITY  
TEXT  
SYNC CHANNEL, DEVICE, CHECK PROTOCOL, LINES  
EVENT SETUP  
SENSOR–CH1,CH2,CH3,CH4,(SVR450)  
CH1,CH2,CH3,CH4,CH5,CH6,CH7,CH8,CH9 (SVR940)  
MD, TEXT, V-LOSS, HDD Error  
RELAY  
NETWORK TYPE (LAN, DHCP, ADSL)  
- IP ADDRESS, SUBNET MASK, GATEWAY, DNS,  
SWR - DDNS SERVER DOMAIN ADDRESS, ID, PW  
NETWORK  
CLIENT ACCESS  
PORT, CLIENT ACCESS, BANDWIDTH SAVING  
SYSTEM ID, BAUD RATE, DATA BIT, PARITY BIT,  
STOP BIT  
RS-232  
RS-422/485  
E-MAIL  
NETWORK &  
SERIAL SETUP  
SYSTEM ID, BAUD RATE, DATA BIT,PARITY BIT,  
STOP BIT  
E-MAIL,MAILADDRESS,MAILSERVERIP,RETURNMAILADDRESS  
PW  
LANGUAGE,KEYBUZZER,DEFAULT,REMOTESETUP,REMOTECON-  
TROLLER ID, DESCRIPTION, TEST MODE  
SYSTEM  
HDD  
HDD FORMAT, HDD DESCRIPTION  
PASSWORD  
CLOCK SETUP  
PTZ  
USER AUTHENTICATION, USER PASSWORD, EVENT BEEP  
CLOCK, DATE MODE, MONTH TYPE  
SYSTEM SETUP  
CHANNEL, PTZ CAMERA ID, MODEL  
Digital Video Recorder  
User’s Manual  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.2 Default Setup  
TheSVR-450/940aredeliveredtocustomerswiththefactorydefaultvaluesasdescribedbelow.To  
initializethemenusetuptothefactorydefaultvalues,select[YES]forthe[DEFAULT]itemin[SYSTEM  
SETUP]-[ETC]onthemenu.Thenallsettingvalueschangedbyusersareinitializedtothedefault  
values as illustrated below.  
• Screen Setup  
Main Menu  
Submenu  
Default  
CHANNEL  
TITLE  
COVERT  
BRIGHTNESS  
CONTRAST  
CH1 ~ 4 ( 950 : CH1 ~ 9 )  
CH1  
OFF  
50  
SCREEN  
50  
SEQUENCE  
SEQUENCE DWELL  
VIDEO LOSS SKIP  
OFF  
1SEC  
OFF  
AUTO  
SEQUENCE  
OSD  
ON  
ON  
ON  
ON  
ON  
ON  
100%  
CLOCK DISPLAY  
HDD FREE SPACE  
RECORD STATUS  
TITLE DISPLAY  
EVENT DISPLAY  
OSD CONTRAST  
STATUS  
SS  
SPOT  
(SVR-940)  
TITLE DISPLAY  
SPOT MODE  
ON  
Manual  
• RECORD SETUP  
Main Menu  
Submenu  
Default  
ON-  
IMAGE SIZE  
360X240  
ON  
1%  
GENERAL  
SETUP  
REPEAT RECORD  
WARNING MESSAGE  
WARNING BEEP  
OFF  
CHANNEL  
MODE  
SCHEDULE  
CH1  
CONTINUOU8  
>>  
IMAGE QUALITY  
FRAME RATE  
PRE EVENT DURATION  
POST EVENT DURATION  
AUDIO  
HIGH  
15f/s  
3 SEC  
5 SEC  
OFF  
DETAIL SETUP  
SENSOR SELECT  
OFF  
Digital Video Recorder  
User’s Manual  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
• EVENT SETUP  
Main Menu  
Submenu  
EVENT BEEP  
EVENT AUTO SEQ  
EVENT TIME  
TEXT MONITORING  
SENSOR  
SENSOR TYPE  
Default  
OFF  
OFF  
5 SEC  
OFF  
CH1  
N/O  
EVENT  
CHANNEL  
MOTION ZONE  
MOTION SENSITIVITY  
CH1  
FULL ZONE  
7
MOTION  
SYNC CHANNEL  
DEVICE  
CHECK PROTOCOL  
HEADER1  
CH1  
NORMAL  
OFF  
>>  
TEXT  
HEADER2  
>>  
DELIMITER  
LINES  
>>  
1
(H1,CH2,CH3,CH4)-SVR-450  
(CH1, CH2, CH3CH4, CH5, CH6, MD, TEXT, V-LOSS, HDD Error  
CH7, CH8, CH9)-SVR-940  
RELAY  
• NETWORK & SERIAL SETUP  
Main Menu  
Submenu  
Default  
NETWORK TYPE  
IP ADDRESS  
SUBNET MASK  
GATEWAY  
LAN  
172.16.1.52  
255.255.0.0  
0.0.0.0  
NETWORK  
DNS  
SWR  
172.16.1.220  
OFF  
DDNSSERVERDOMAINADDRESS  
ID  
PW  
PORT  
CLIENT ACCESS  
BANDWIDTH SAVING  
3495  
ON  
OFF  
CLIENT ACCESS  
Digital Video Recorder  
User’s Manual  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
Main Menu  
RS-232  
Submenu  
SYSTEM ID  
BAUD RATE  
DATA BIT  
PARITY BIT  
STOP BIT  
Default  
0
9600  
8
NONE  
1
SYSTEM ID  
BAUD RATE  
DATA BIT  
PARITY BIT  
STOP BIT  
1
9600  
8
NONE  
1
RS-422/485  
E-MAIL  
MAIL ADDRESS  
MAIL SERVER IP  
ID  
E-MAIL  
OFF  
PW  
RETURN MAIL ADDRESS  
• SYSTEM SETUP  
Main Menu  
Submenu  
Default  
LANGUAGE  
KEY BUZZER  
ENGLISH  
ON  
DEFAULT  
>>  
ON  
0
DISPLAY  
>>  
SYSTEM  
REMOTE SETUP  
REMOTE CONTROLLER ID  
DESCRIPTION  
TEST MODE  
HDD FORMAT  
HDD DESCRIPTION  
APPLY  
DISPLAY  
HDD  
USER AUTHENTICATION  
USER PASSWORD  
EVENT BEEP  
>>  
>>  
OFF  
PASSWORD  
CLOCK  
DATE MODE  
MONTH TYPE  
>>  
CLOCK SETUP  
YYYY/MM/DD  
INITIAL  
CHANNEL  
PTZ CAMERA ID  
MODEL  
CH1  
0
NONE  
PTZ  
Digital Video Recorder  
User’s Manual  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.3 Menu Screen Setup  
SelecttheMENUbuttonontheremotecontrolorthemainunit,andthefollowingMenuScreen  
appears.  
MAIN MENU  
SUB MENU  
SETUP  
SETUP GUIDE  
• PresstheMENUbutton,andthebackgroundscreenisswitchedtothequadsplit  
screen.  
Notes  
· Main Menu: Select the Main Menu corresponding to each Tab.  
· Submenu: Select the Submenu to be set up on the Main Menu.  
· Setup Items: Change the settings on the Submenu.  
· How to Set: This message provides a guide for menu setup.  
· It may take a little while for the recording setup to complete. Please wait.  
· Except for the recording setup, setting changes are applied immediately.  
Operations  
* Operation of the unit using the buttons on the main unit.  
- Move between Menus : Press the Arrow  
- Change Setting Values : Press the  
buttons.  
Buttons.  
- Exit from Menu Screen : Press the ESC Button.  
* Operation using the Remote Control  
- Move between Menus : Press the Arrow  
buttons.  
- Change Setting Values : Press the  
Buttons.  
- Exit from Menu Screen : Press the ESC Button.  
Digital Video Recorder  
User’s Manual  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.4 SCREEN SETUP  
ThisisthesetupmenurelatedtotheDVRsystem.PresstheMENUbuttonandselecttheTabusing  
theLeft/Rightbutton.Thenthesubmenurelatedtothesystemappearsasillustratedbelow.Press  
theENTERbuttonandselectthesubmenuusingtheLeft/Rightbutton.ThenpresstheENTERbutton  
again and you can select setup items using the Left/Right button.  
5.4.1 CH1~CH4 / CH1~CH9 (for SVR-940)  
Select setup items related to channels such as channel titles or brightness.  
· Title : Titlescanbeindividuallysettoeachchannel.SelectthechanneltitleandpresstheENTERbutton.  
Thenthekeyboardtoenterthetitleisdisplayedasillustratedbelow.Thepositionsofcharactersin  
the Channel Titles can be arranged by using the  
buttons.  
- After moving the cursor press the ENTER button to select the relevant character.  
- To exit from the Menu Setup, press the ESC button.  
- Press the Up/Down arrow button to move between character strings.  
- Toinsertspaces,movethecursortoSPACEonthescreenandthenpressSELECTontheremote  
control or the ENTER button on the main unit.  
· COVERT : Set whether to display or hide the selected channel.  
WhenCOVERTissetto"ON",theselectedchannelisnotdisplayedonthescreenbutis  
recorded.(Thisfunctioncanbeusednottodisclosethechannelselectedtoanyoneelse.)  
Digital Video Recorder  
User’s Manual  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
. BRIGHTNESS : Adjusts the screen brightness by changing the values.  
. CONTRAST : Adjusts the screen contrast by changing the values.  
5.4.2 AUTO SEQUENCE  
Thelivescreensareautomaticallyswitchedintheorderof[SVR-450:<CH1->CH2->CH3->CH4]/[SVR-  
940: <CH1 -> CH2 -> CH3 -> CH4 -> CH5 -> CH6 -> CH7 -> CH8 -> CH9 >] at the predefined switching  
interval. The channel switching interval can be set from 1 up to 10 on the [SEQUENCE] menu.  
. SEQUENCE : Set it ON for Auto Sequence mode  
. SEQUENCE DWELL : Setthescreendisplaydurationbychannel.Theswitchingintervalcanbesetfrom  
1 up to 10 sec.  
. ORDER : Select the channels for Auto Sequence.  
. USER DEFINE : Select the display channels for Auto sequence in Quad mode display screen.  
. VIDEO LOSS SKIP : WithVideoLossSkip[ON],channelswithoutvideoinputsignalsareautomatically  
skipped and only channels with video input are displayed.  
5.4.3 STATUS DISPLAY  
Selects information to display on the live screens.  
Digital Video Recorder  
User’s Manual  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
· OSD [ON/OFF] : With OSD [ON], Status information is displayed on the live screen.  
·CLOCKDISPLAY[ON/OFF]:WithClockDisplay[ON],thecurrenttimeisdisplayedonthelivescreens.  
· HDD FREE SPACE [ON/OFF] : WithHDDFreeSpace[ON],thefreespaceforrecordingontheHDDis  
indicated.  
· RECORD STATUS [ON/OFF] : WithRecordStatus[ON],therecordingstatus"S"isdisplayedonthecorner  
of the screen during recording.  
· TITLE DISPLAY [ON/OFF] : WithTitlesDisplay[ON],thetitlesof[CH1~4]setontheChannelTitlesubmenu  
by users are displayed on the live screens.  
· EVENT DISPLAY [ON/OFF] : WithEventDisplay[ON],theeventinformationisdisplayedwhenanevent  
occurs.  
· OSD CONTRAST : Set the contrast for Menu OSD. The higher the %, the darker the OSD.  
5.4.4 SPOT  
The SPOT menu is available for only SVR-940.  
· TITLE DISPLAY : Select whether to display the channel name on the SPOT screen.  
· SPOT MODE  
Manual : Select [Manual] and save this setting.  
Press“0”onthesystemfrontbuttonor“10”ontheremotecontroller(“SP”isdisplayedon  
theleftuppercorner)andpressthenumberofthechannel.ThentheSPOTchannelwillbe  
displayed on the SPOT monitor.  
In order to cancel this setting, press the ESC button.  
Sequence : Set to display one SPOT channel in sequence.  
Digital Video Recorder  
User’s Manual  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.5 RECORD SETUP  
ThisisasetupmenurelatedtotheDVRsystem.PresstheMENUbuttonandselecttheTabusing  
theLeft/Rightbutton.Thesubmenurelatedtothesystemthenappearsasillustratedbelow.Press  
theENTERbuttonandselectthesubmenuusingtheLeft/Rightbutton.ThenpresstheENTERbutton  
again and you can select setup items using the Left/Right button.  
5.5.1 GENERAL SETUP  
1. IMAGE SIZE  
Recording Resolution can be selected.  
Thehighertheresolutionthesystemissetto,thebettertherecording,butthemorespacethesystem  
needs.  
The Monitoring screen can be recorded on the system's HDD.  
2. REPEAT RECORD: Set whether to repeat recording.  
-[YES]:IfnostoragespaceisleftontheHDD,recordingiscontinuedbyoverwritingtheoldestdata.  
- [NO]: If no storage space is left on the HDD, recording is stopped.  
3. WARNING MESSAGE  
WhentheremainingcapacityoftheHDDreachesapredefinedpercentage,awarningmessageisdis-  
played to users. The warning level can be set from 1 to 10%, 5 ~10% in general.  
4. HDD WARNING BEEP  
WhentheremainingcapacityoftheHDDreachesthepredefinedpercentage,awarningbeepisacti-  
vated.  
Digital Video Recorder  
User’s Manual  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.5.2 DETAIL SETUP  
. CHANNEL : Select the channel for which to set DETAILED SETUP.  
MODE : Select one of four recording methods below.  
CONTINUOUS  
SCHEDULE  
Continuous recording mode for 24 hours a day  
Reserved recording  
Recordingisactivatedwhenthesystemdetectsmotionfrominputvideo  
images.  
MOTION DETECT  
SENSOR  
DISABLE  
Recording is activated when the system detects sensor operation.  
This is the setup mode to disable recording  
• V-LOSS : V-LOSScanberecordedwhen'DETAILSETUP/MODE'issetasMOTIONDETECTIONorSEN-  
SORand'DETAILSETUP/PREEVENTDURATION'issetas'ON'.Incaseofrecording'V-LOSS',  
thedataisrecordedonaLogfile.V-LOSSdatacanbesearchedforfromtheSEARCHmenu  
accordingthetimewhentheV-LOSSoccurredasrecordedintheLogfile. (Pleasereferto  
4.5.6. Log file search)  
· SCHEDULE : PresstheENTERbuttonwhenthecursorisonSCHEDULE,andtheschedulesetupscreen  
appears as illustrated below.  
Digital Video Recorder  
User’s Manual  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
A Schedule can be set 24 hours a day.  
· S : Sensor record  
· - : No record  
· C : Normal record  
· M : Motion detection record  
· T : Text record  
IMAGEQUALITY[High/Mid/Low]:Setthecompressionlevelforimagestobestored.Ataresolutionof  
720X480,thesystemrecordsatmax.30fps.Ataresolutionof360X240,thesystemrecordsatmax.12fps.  
PRE EVENT DURATION : Thisisthepre-eventrecordingsetup.Itautomaticallyrecords5secondsof  
pre-eventdataifyousetitto5secs.Pre-eventrecordingisnotactivatedifyou  
set it to OFF.  
POST EVENT DURATION : Recordingcontinuesforthepredefinedtimefollowingtheoccurrenceofan  
event. The available setting values are from 1 to 20 seconds.  
AUDIO : Select whether to save audio data along with video.  
SENSOR SELECT: Set it to ON to activate the sensor.  
5.6 EVENT SETUP  
ThisisasetupmenurelatedtotheDVRsystem.PresstheMENUbuttonandselecttheTabusing  
theLeft/Rightbutton.Thesubmenurelatedtothesystemthenappearsasillustratedbelow.Pressthe  
ENTERbuttonandselectthesubmenuusingtheLeft/Rightbutton.ThenpresstheENTERbuttonagain  
and you can select setup items using the Left/Right button.  
5.6.1 EVENT  
EVENT BEEP : Select whether to turn the buzzer ON or OFF.  
EVENT AUTO SEQ : Set to display in full screen the channel that the event activated.  
EVENT TIME : Set the full screen display time when the event was activated. (3 to 5 seconds)  
DuringthisEVENTTIME,otherevent-activatedchannelsrecordbutdonotdisplayinfull  
screen.OnlyafterthisEVENTTIMEends,canotherevent-activatedchannelsbedisplayed  
in full screen.  
TEXTMONITORING:SetwhethertodisplayPOSinformationsuchasproductname,price,quantity,etc.  
Digital Video Recorder  
User’s Manual  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
SENSOR : Select the channel for sensor setup.  
- SENSOR TYPE : Select the sensor type. (N/O, N/C)  
- N/O : NORMAL OPEN type sensor  
- N/C : NORMAL CLOSE type sensor  
- OFF : Set the sensor OFF  
5.6.2 MOTION DETECTION  
After setting RECORD MODE/MOTION, set the motion detection for every  
CHANNEL : Select the channel for motion detection setup.  
MOTION ZONE : Select the area for motion detection to Full or Partial zone.  
-FULLZONE:DetectsmotionbyanalyzingthechangesinFullimagesfromcameras.  
- PARTIAL ZONE : Users can select the desired zone for motion detection.  
MOTION SENSITIVITY : Youcansetthesensitivitytochangesonascreenfrom1to9.Highervaluesmean  
more precise motion detection.  
5.6.3 TEXT  
ThismenuistosetuprecordingofPOSdataovervideo.Inordertomatchitwithaninputdeviceand  
its protocol, assign a HEADER1/2 and DELIMITER and set the line to display the data.  
Digital Video Recorder  
User’s Manual  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
· SYNC CHANNEL: Select the channel to display TEXT data from a POS device.  
· DEVICE  
-NORMAL:SelectNORMALwhenconnectinganormalinputdevicesuchasabarcodescanningdevice.  
- Finger 007 : Select 'Finger007' when connecting a finger print scan device.  
· CHECK PROTOCOL  
- HEADER1  
- HEADER2  
- DELIMITER  
- LINES : Set the number of lines to display TEXT data.  
5.6.4 POS quick guide  
ConnectthesystemtothePOSdeviceusingaserialcable.InordertodisplayTextdataoverascreen,  
atleastoneofthechannelsistobesettoTEXTrecordingmodeandTEXTdisplay.Setwhetherto  
displayTEXTdataoverascreenfromSETUP'EVENTSETUP'EVENT–TEXTMONITORING.Selectthe  
channeltodisplayTEXTdataoverascreenfromSETUP'EVENTSETUP'TEXT–SYNCCHANNEL.POS  
TEXT data is displayed only over a full screen, not on quad split screen.  
· DEVICE : NORMAL/Finger007typeareavailable.NORMALmeansanormalinputdevicesuchasabar  
code scanning device. Finger007 means a finger print scan device.  
· PROTOCOL : WhenPROTOCOLissetto°ÆOFF°Ø,header1,header2,anddelimiterarenotactivated.  
·Header1:InputlettersthatindicatethebeginningofTEXTdatainordertoanalyzedevicedata.  
· Header2: Input letters that indicate the beginning of TEXT data. (Two Headers can be input.)  
· Delimiter: Input letters that indicate the end of TEXT data  
· LINES: Set the number of lines to display TEXT data.  
Ex) The following are sample data from a POS device.  
Kalatel Quick-Easy Mart<0D><0A>  
3197 Airport Loop Drive<0D><0A>  
Costa Mesa, Ca. 92626<0D><0A>  
<0D><0A>  
Chips  
$0.99<0D><0A>  
---------------------------<0D><0A>  
TOTAL  
<0D><0A>  
$ 7.99<0D><0A>  
Candy Bar  
$1.49<0D><0A>  
Soft Drink 64oz. $2.49<0D><0A>  
WhenCHECKPROTOCOLissettoOFF,adifferent  
data format from the above is displayed.  
WhenHEADER1/2issettononeandDELIMITERis  
setto<0D><0A>andLINESissetto10lines,TEXT  
data is displayed as below,  
Digital Video Recorder  
User’s Manual  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
Kalatel Quick-Easy Mart  
3197 Airport Loop Drive  
Costa Mesa, Ca. 92626  
Candy Bar  
Soft Drink 64oz. $2.49  
Chips $0.99  
---------------------------  
TOTAL $ 7.99  
$1.49  
POS scenario  
LIVE SCREEN  
POSTEXTdataisdisplayedonlyoverafullscreen,notonquadsplitscreen,andisdisplayedfor3to4  
seconds.  
PLAYBACK SCREEN  
POS TEXT data is displayed only over a full screen, not on quad split screen.  
Whenthelinkedchannelisdisplayedinfullscreen,theTEXTdataisdisplayedovertheplaybackscreen.  
Up/down button: PresstheUpbuttontodisplayTEXTdataandpresstheDownbuttontohideTEXT  
data. (Available during playback and pause.)  
Left/rightbutton:PresstheRightbuttontodisplaythenextpageofTEXTdataand  
presstheLeftbuttontodisplaythefirstpageofTEXTdata.(Availableduringpause.)  
5.6.5 RELAY  
This menu is for setting relay.  
SVR-450  
SVR-940  
SENSOR(CH1,CH2,CH3,CH4):Whenthesensoroftheselectedchannelisactivated,thesystemrelaysout.  
MD : When motion of the selected channel is detected, the system relays out.  
TEXT : When POS is activated, the system relays out.  
V-LOSS : When there is a video loss, the system relays out.  
HDD ERROR : When there is an HDD error, the system relays out.  
Digital Video Recorder  
User’s Manual  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.7 NETWORK  
5.7.1 NETWORK  
Set the necessary items for network connection to a computer.  
· NETWORK TYPE [ADSL/LAN/DHCP] : Selects the network type to connect to a computer.  
·IPADDRESS:Entersthe[IPADDRESS]thattherelevantInternetserviceproviderassignstoauser.  
· SUBNET MASK : Entersthe[SUBNETMASK]addressthattherelevantInternetserviceproviderassigns  
to a user.  
·GATEWAY:Entersthe[GATEWAY]addressthattherelevantInternetserviceproviderassignstoauser.  
· DNS : Enters the [DNS] address that the relevant Internet service provider assigns to a user.  
· ID : Enters a User ID registered with the relevant service provider.  
· PW : Enters a User Password registered with the relevant service provider.  
· DDNS SERVER ON/OFF : WhentheDVRisconnectedtoadynamicIP,theIPaddresschangesevery  
timeitattemptstoconnecttotheISP.Inthiscase,thereisnowayforauser  
toknowthechangedIPaddress.IfaDVRthatusesadynamicIPaddressis  
registeredwithitsdomainname,thedomainnamecaneasilybefoundand  
can be connected even if the IP changes.  
DDNS SERVER DOMAIN ADDRESS : InputthedomainaddressoftheDDNS  
SERVER that it is using.  
· ID : Input the registered ID at www.samsungipolis.com .  
· PW : Input the registered PW at www.samsungipolis.com .  
5.7.2 DDNS Register  
1) UserscansettheDDNSinthesetupmenuoftheSVR-440/940asbelow.SelecttheNetworkmenu  
and the following screen is displayed. Set [SWR] to [ON]  
Digital Video Recorder  
User’s Manual  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
This is all about DDNS setup in the DVR unit.  
2) Afterfinishingtheabovestep,pleasetakethenextstepwiththeDDNSserver.PleaserefertoChapter  
5.8 DDNS Registration.  
5.7.3 Client access  
· PORT : When connecting to a PC, the ports can be changed.  
To connect the SVR-450 to a router, all three ports need to be set..  
Default setting port on DVR: Control – Connect, PTZ, Events and other control data  
Default setting port +1: VIDEO  
Default setting port +2: AUDIO  
For example) Default setting port on DVR: 3495  
Setting port for VIDEO: 3496  
Setting port for AUDIO: 3497  
· CLIENT ACCESS : Set the Network access password.  
·BANDWIDTHSAVING:SelectBandwidthSavingON,andframeratetransmissionreducesto1fps.  
Digital Video Recorder  
User’s Manual  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.7.4 RS-232  
This menu is for setting a connection with a POS device.  
· SYSTEM ID : Set the system ID.  
· BAUD RATE : Set the data transfer speed per second.  
· DATA BIT : Set the data transfer bit-rate.  
· PARITY BIT : Set the type of error checking for data transfer.  
· STOP BIT : Set the insert bit after data transfer.  
5.7.5 RS-422/485  
This menu is for setting a connection with Cameras and CCTV devices.  
· SYSTEM ID : Set the system ID.  
· BAUD RATE : Set the data transfer speed per second.  
· DATA BIT : Set the data transfer bit-rate.  
· PARITY BIT : Set the type of error checking for data transfer.  
· STOP BIT : Set the insert bit after data transfer.  
5.7.6 E-MAIL  
In case of still image capturing at an event, input the IP address to send this captured image to.  
The conditions of sending e-mail  
· Ifthesettingvalueis'Motion','ON','ON',theDVRwillsende-mailwithJPEGfilewheneventoccurs.  
· Whensettingvalueis'ON',ifthesystemIPischangedbyusingdynamicIP,theDVRwillsende-mail  
include changed IP information.  
Digital Video Recorder  
User’s Manual  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
· SEND E-MAIL : Select ON for E-mail sending.  
· MAIL ADDRESS : PresstheENTERbuttontodisplaytheKeyboardscreenandselectthecorrectE-mail  
address.  
· MAIL SERVER IP: Please keep the default value.  
ID : Input the registered ID of the MAIL SERVER.  
PW : Input the registered PW of the MAIL SERVER.  
· RETURN MAIL ADDRESS : Inputthee-mailaddresstoreturnanundeliveredmailtothemailaddressthat  
is set from MAIL ADDRESS.  
5.8 DDNS Registration  
5.8.1. DDNS Registration Procedure  
1) Sign up at iPOLiS website  
The website : www.samsungipolis.com  
Digital Video Recorder  
User’s Manual  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
- Agreement the general terms and conditions  
- SIGN UP page : check ID availability  
Digital Video Recorder  
User’s Manual  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
2)The product registration is possible after sign up.  
- Sign in at iPOLiS website  
- Product List (If you didn’t register products, there are no list)  
- Product Registration (Check ID availability)  
Digital Video Recorder  
User’s Manual  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
- Check the registration at product list  
3) DDNS Configuration at DVR  
Press the MENU button, then select [Network] on OSD Menu.  
• DDNS > Select‘Yes’  
• DDNS SERVER DOMAIN NAME > Enter the DDNS server address  
(Default:www.samsungipolis.com)  
•ID&PW>EntertheID(Domain)&PasswordusingtheproductregistrationatiPOLiSwebsite.  
The DDNS configuration at DVR is completed.  
Digital Video Recorder  
User’s Manual  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
4) The connection status of selected product can be checked on product list.  
[VIEW]  
: See the log-in page of selected product  
[Edit]/[Delete]  
: Edit/Delete the selected product, password is needed for checking  
•The product‘ID(domain)’can not be changed at registered status.  
WhentheproductneedstochangetheID,firstofall,deletethedesiredproduct,and  
register product again.  
Caution  
5.9. Instructions on using DDNS  
1) Product information confirmation.  
Digital Video Recorder  
User’s Manual  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
- under‘Product Information’  
-Checkingtheproductinformation(Product,ModelNumber,ID(Domain),MACAddress,etc)  
2) Video playback function  
View : Move to the login web page of selected product.  
-
•Ifyouwanttomultichannelslivemonitoring,searching/playbacksimultaneously,  
werecommendtousingSNM-64S/Ps/wprogram.TheiPOLiSwebsitedoesn't  
support multi [View] connection at one PC.  
Caution  
3) Product maintenance functions.  
'Productmaintenance'and'edit/delete'productsregisteredintheproductlistcanbeselected.User  
will be transferred to the appropriate page when the security code is entered.  
Product‘ID(Domain)’cannot be edited so if deleted, ‘ID(Domain)’must be re-entered.  
Digital Video Recorder  
User’s Manual  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
i. Editing product profile  
- Click the edit button from the product list  
5.10 Editing registered product  
ii. Deleting Product  
- Click delete from the product list  
- Registered product is deleted  
Digital Video Recorder  
User’s Manual  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.11 System setting  
ThisisasetupmenurelatedtotheDVRsystem.PresstheMENUbuttonandselecttheTabusing  
theLeft/Rightbutton.Thesubmenurelatedtothesystemappearsasillustratedbelow.Pressthe  
ENTERbuttonandselectthesubmenuusingtheLeft/Rightbutton.ThenpresstheENTERbuttonand  
you can select setup items using the Left/Right button.  
5.11.1 System  
· LANGUAGE : SelectsthelanguagefortheMenuscreen.10languagesincludingKoreanandEnglishare  
available.  
· KEY BUZZER : Selects whether to generate a key sound when pressing the buttons.  
· DEFAULT : Initializes the setting values of the unit to the factory default values.  
· REMOTE SETUP : Selectswhetherthesystemsettingscanbechangedfromaremotesiteoverthenetwork.  
·
REMOTE CONTROLLER ID : SettheremotecontrolID.AremotecontrollerIDcanbeselectedfrom  
numbers0to9.TheremotecontrollerIDisdisplayedwithaniconsuchas  
R:1,R:2etconthescreen.Ifyouselect0,itappearsasR:Aonthescreen  
andtheusercancontrolalltheDVRsbyusingonlyoneremotecontroller.  
·
DESCRIPTION : DetailedinformationabouttheunitsuchastheS/WVersion,HDDcapacity,IPAddress,  
MAC address, and UI TOOLKIT Version.  
Digital Video Recorder  
User’s Manual  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
·
TEST MODE : Select to upgrade the firmware of the system.  
Please refer to Chapter 5.14.1 Firmware upgrade.  
5.11.2 HDD  
HDD FORMAT : SelectwhethertoinitializetheHDD.SelectONtodeletealldatasavedintheHDDand  
the unit will automatically reboot for system stabilization.  
HDDDESCRIPTION:Detailedinformationsuchasthesize, andrecordingstarttimeoftheHDD.  
Digital Video Recorder  
User’s Manual  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.11.3 Password  
Set the Admin and Network Passwords and set each limitation according to each password.  
The DVR supports one ADMIN and three USER accounts.  
· USER AUTHENTICATION : TheDVRrequireseachusertosetsupapasswordinordertobeableto  
control the given functions.  
The password should consist of four numbers. (e.g.1,2,3,4)  
· USER PASSWORD : Set the user password.(Admin, USER 1~3)  
A password is composed of digits from 1 to 9  
·EVENTBEEP:Thesystemwillbeepoutwhenauserinputsthewrongpasswordmorethanthreetimes.  
5.11.4 User Authentication  
Select whether to pop up window that asks  
for a Password.  
When it selects to pop up a Password window,  
the user is shown.  
Digital Video Recorder  
User’s Manual  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
1. Authorization functions  
- Administrators build the system considering the two factors below.  
i. Select the functions whose use is to be restricted.  
▶PASSWORD CHECK = O : Function that only a designated person can use.  
∴ꢀThe USER who uses the function must be selected.  
→ꢀꢀInordertoexecutethefunction,thedesignatedUSER(theUSERwhoisselectedontheLISTas  
'O') must obtain authorization using his own PASSWORD.  
ii. Select the functions whose use is not to be restricted.  
▶ꢀPASSWORD CHECK = X : Function that any person can use.  
∴ꢀTheUSERwhousesthefunctionsdoesnotneedtobeselected,becausethefunctionscanbe  
used by any USER.  
The USER selection function cannot be used.  
→ꢀIn the case of 'PASSWORD CHECK = X', all items in the line are initialized to 'O'.  
2. The authority to view the 'SYSTEM SETUP-PASSWORD-USER AUTHORIZATION' page  
- Only an administrator can view this page.  
- Inthecaseof'PASSWORDCHECK=X',thesystemdoesnotarchiveanydataaboutwhologsinto  
the system menu.  
▶ꢀEverybody can view 'SYSTEM SETUP-PASSWORD-USER AUTHORIZATION'.  
When the user is the only one who operates the system, this setting can be available.  
Onlywhenthe'PASSWORDCHECK'issetto'O'canadiscriminatoryauthoritybesetforeachof  
the functions.  
· MENU : Set the authority to use the MENU function.  
· PB : Set the authority to use the PLAYBACK function.  
· PTZ : Set the authority to use the PTZ function.  
· R/OFF : Set the authority to use the Recording Off function.  
· P/OFF : Set the authority to use the Power Off function.  
· P/ON : Set the authority to use the Power On function.  
· N/MIC : Set the authority to use the Bi-directional audio function.  
* Whenthe'PASSWORDCHECK'issetto'X',everybodycanview'SYSTEMSETUP-PASSWORD-USER  
AUTHORIZATION'  
'X':Everybodycanviewandusethefunctionregardlessofuserauthority.(Nopasswordnecessary)  
'O' : Inaccessible to users without permission even if the password is known.  
Digital Video Recorder  
User’s Manual  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.11.5 CLOCK SETUP  
Set the system date.  
· CLOCK : Set the system time. The unit will automatically reboot for system stabilization.  
- DAYLIGHT SAVING : Select whether to apply Daylight Saving Time.  
- DATE SETUP : Set the system time.  
- NTP : NPTisanabbreviationforNetworkTimeProtocol,whichisforsynchronizingtheclocks  
of computer systems over variable-latency data networks.  
- TIME SERVER : Input the address of the NTP TIME SERVER.  
- GMT : GreenwichMeanTime(GMT)isatermoriginallyreferringtomeansolartimeatthe  
RoyalObservatory,GreenwichinLondon.BecauseNTPsynchronizesclockswith  
GreenwichMeanTime(GMT)regardlessofgeography,usersmustsettheirowntime  
difference. ( Ex.: KOREA GMT +09:00 )  
· DATE MODE: Set the date format. There are three type of date format.  
- YEAR/MONTH/DATE  
- MONTH/DATE/YEAR  
- DATE/MONTH/YEAR  
- YEAR-MONTH-DATE  
- MONTH-DATE-YEAR  
- DATE-MONTH-YEAR  
. MONTH TYPE : Set the month format, such as the English abbreviation and the number.  
Digital Video Recorder  
User’s Manual  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.12 PTZ  
ThisisasetupmenurelatedtotheDVRsystem.PresstheMENUbuttonandselecttheTabusing  
theLeft/Rightbutton.Thesubmenurelatedtothesystemappearsasillustratedbelow.Pressthe  
ENTERbuttonandselectthesubmenuusingtheLeft/Rightbutton.ThenpresstheENTERbuttonand  
you can select setup items using the Left/Right button.  
5.12.1 Setting for each channel  
Set the camera ID and model for each channel.  
· CHANNEL : Select the channel to set.  
· PTZ CAMERA ID: Set the IDs from 0 to 255 for each camera connected to the system.  
· MODEL : Setthecameramodel.Pleaseselectthecorrectmodelnamebecauseeachcameramanufac-  
turer applies different camera control protocols.  
Available models  
- Samsung Electronics : MRX-1000, MPT230  
- Samsung Techwin : SPD-3300,2300,1000  
- PELCO : PELCO(P), PELCO(D), CM6700  
- SRX : SRX-100B  
- DONGYANG : DSC-230S/230M/240, DCP-100, DRX-500/502A  
- Others : WONWOO,CANON,DYNACOLORDSCP,COSTAR2500,KALATELKTD-312,SENSORMATIC  
PTZ,ELMOPTC-200,WOOJU(DRX-502A),KCC-PT400,VIDOB-01,LGLPT-A100L,TSC,PIH-  
302,DS-120,SCC-641,WV-CS850,VC-C50I,NIKO NK-97,NEWBORN DOME, SJ-100,DY-  
255,HRX-700,ERNA  
- VICON : VPS1300, V2311RB3, 422R  
- CNB : PTZ102N,  
- SONY : EVI-D30  
5.13 EXIT MENU  
PresstheESCbuttontoclosethemenuaftersetup.Theconfirmationboxappears.SelectYESandthe  
setting values are saved.  
Digital Video Recorder  
User’s Manual  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.14 ETC  
5.14.1 Firmware Upgrade  
Userscanupgradethesoftwarebydoingafirmwaredownload.Youcandownloadthefirmwarewith  
a USB Memory stick.  
① Select 'MENU' and go to [SYSTEM SETUP]-[SYSTEM]-[TEST MODE].  
② The DVR will reboot and the system will show the DVR DIAGNOSTICS MENU as below.  
③ PleasecreateafolderintheUSBmemorystickandnameit'UPGRADE'.Copytheupgradefileinto  
the folder and connect the USB memory stick to the DVR.  
Thefolder'snamemustbe'upgrade'.Ifthefolder'snameisnot'upgrade',thesystemcannotdown-  
load the correct firmware from the USB memory stick.  
④ Select USB UPGRADE on the screen and the firmware upgrade automatically proceeds.  
⑦Whentheupgradeisdone,theDVRwillberebooted.SelectBOOTAPPLICATIONinthetestmode.  
⑧ TheDVRwillberebootedagainandgobacktolivemonitoringscreenmode.Nowthefirmware  
upgrade is completed.  
• Thefunctiontoupgradefirmwareoveranetworkisnotprovided,becauseupgrading  
thefirmwareoveranetworkcouldcauseafatalerrorinthesystemifthnetworkgot  
disconnected.  
Notes  
Digital Video Recorder  
User’s Manual  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
5.14.2 Index Start Fail  
WhentheDVRsystemtimeisresetormismatched,themessagebelowisdisplayed.Thismessageis  
displayedwhentheDVRsystemtimeissettobeforeofthetimerecordingdataontheHDD.IftheDVR  
system time is set correctly, the DVR will not show the 'TIME MISMATCH' error message.  
① Whentheabovemessageisdisplayed,powerthesystemOFF.PleasethepowerthesystemON,  
pressingtheESCbutton.(PresstheESCbuttonandholdituntiltheinitialmessageisdisplayedon  
thescreenasbelow.)ThenthesystemwillaskwhethertoenterintotheDVRDIAGNOSTICSMENU.  
Iftheuserselects[YES],theDVRDIAGNOSTICSMENUwillbestarted.Whenthepasswordispre-set,  
the password window is displayed.  
② Select 'RTC Configuration'. The picture below is displayed.  
Digital Video Recorder  
User’s Manual  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Configuration  
③ After setting the YEAR/MONTH/DATE/HOUR/MIN/SEC, press the ENTER button.  
④ Pleasesetthetimecorrectly.IfthetimeoverlapsthefinalrecordingdateontheHDD,theoverplayed  
data will be deleted. .  
⑤ The DVR will be rebooted. Select BOOT APPLICATION.  
• Please check if the USB memory stick is compatible with the DVR  
- SAN DISK CO, PRETEC , LG, INNOTECH C&C, TRANSCEND, etc.  
•“TESTMODE”,“FACTORYDEFAULT”,“MACCONFIGURATION”isformanufacturer’suse  
Caution  
only. Please do not touch.  
Chapter 6. Web-Viewer  
6.1 Login page  
Items  
MODEL  
Description  
Select the system to connect with[using? to?] Web-viewer.  
Select from '440/450/940'.  
Digital Video Recorder  
User’s Manual  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Web-Viewer  
Items  
Description  
If the system is using a Dynamic IP address, select 'iPolis Server'.  
Connection Type  
Tousethisfunction,thesystemmustbepre-registeredintheiPOLiShome  
pageandtheNETWORKmenuofthesystemmustbeproperlypre-set.  
InputtheIPaddressofthesystemifthe'ConnectionType'is'IPAddress'.  
Whenthe'ConnectionType'is'iPolisServer',thedefaultsettingvalueis  
displayed.  
The default setting value is www.samsungipolis.com  
IP/Domain  
Port  
Inputtheportnumberofthesystemifthe'ConnectionType'is'IPAddress'.  
InputthesystemIDthatwaspre-registeredintheiPOLiShomepage,when  
the 'Connection Type' is 'iPolis Server'.  
OnlytheUSERIDthatispre-setin'SYSTEMMENU/PASSWORD/USERAU-  
THORIZATION'ofthesystemmenucanbeused(Admin,USER1~USER5).  
USER ID  
PASSWORD  
Input user Password.  
6.2 LIVE mode  
Digital Video Recorder  
User’s Manual  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Web-Viewer  
Buttons  
Functions  
Button to select screen display from 4/ 9/ 16 channels.  
(4 / 9 channels screen display is available for SVR-450/940.)  
/
/
Button to activate Auto sequence mode. ( = Auto Sequence )  
Button for playback pause. (Does not work in Live mode.)  
Button for saving JPEG images.  
Button to change to Search mode.  
Not available in SVR-940/450 models.  
Button to control audio. Works when the user logs in as 'Admin'.  
Button to change the PAN/ TILT mode of speed dome cameras.  
Before using this function, please set the PTZ field to '0' in 'SYSTEM  
MENU / PASSWORD / USER AUTHORIZATION'.  
ButtontochangetheZOOM/FOCUSmodeofspeeddomecameras.  
Before using this function, please set the PTZ field to '0' in 'SYSTEM  
MENU / PASSWORD / USER AUTHORIZATION'.  
Button for ZOOM IN/ OUT.  
/
/
Button for FOCUS IN/ OUT.  
Not available in SVR-940/450 models.  
Not available in SVR-940/450 models.  
Button to control Alarm. ( = Alarm Out )  
/
/
Digital Video Recorder  
User’s Manual  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Web-Viewer  
6.3 SEARCH mode  
Buttons  
Functions  
Button to change to Live mode.  
Buttons for playback 1 minute before/after.  
Buttons to start and stop play.  
/
/
/
Buttons to move 1 frame back/1 frame forward.  
Buttons to fast-rewind/fast-forward play.  
( 2 x and 4x play speeds. )  
Windowtodisplaythecalendar.Dateswithrecordeddataaredisplayed  
incolors.Whenadateisclicked,thewindowbelowshowstimebarswith  
the data.  
Select the time to play the data.  
Digital Video Recorder  
User’s Manual  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Web-Viewer  
6.4 Web-Viewer buttons  
1) Live Mode  
Not available  
4/9/16 channels  
Auto Sequence  
- Auto sequence of the selected  
channel.  
Button for Search Mode  
'ZF' mdoe.  
Button to go or return to the selected  
menu in the camera OSD menu.  
Display camera OSD menu  
Close camera OSD menu  
Buttonstoselectthespeeds  
for Pan/Tilt/Zoom/Focus  
(Max. 6X)  
* Buttons for 'Zoom/Focus' of camera OSD control  
ZOOM IN  
FOCUS IN  
FOCUS OUT  
ZOOM OUT  
Digital Video Recorder  
User’s Manual  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Web-Viewer  
2) Search Mode  
Button for Live Mode  
Button for OSD control  
over video screen. (Show/hide)  
Play buttons  
ed  
Calendar  
Digital Video Recorder  
User’s Manual  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7. Troubleshooting  
TheSVR-450/940isaverysophisticateddevice,sofailurecanoccur.Incaseoffailure,pleasefollow  
the instructions given below.  
• The unit will not turn on even after plugging in the adaptor jack.  
* Check whether the power cord is properly plugged in.  
• Images are not appearing on the monitor after plugging in the adaptor jack  
* Check whether the video output is BNC or VGA (Check the dip switch at the rear.)  
* Check whether the camera connected to the input terminal is properly connected.  
* Check whether the brightness of the monitor is properly set.  
• No audio in the recorded video  
* Check whether [AUDIO] in [RECORD SETUP] of the Menu is [OFF].  
* Check the volume of the CCTV monitor.  
• The remote control does not work  
* Check the battery and replace if necessary.  
* Operate the remote control by pointing it directly toward the unit's receiver.  
* If the unit ID and the remote control ID do not match, set the same ID for both devices.  
• HDD recording is not performed  
* TheHDDwillnotrecordvideoiftheservicelifeoftheHDDhascometoanendortherearebad  
sectors in the HDD. In these cases, replace the HDD  
• The unit does not perform Scheduled Recording  
*CheckwhethertheScheduledRecordingStart/Endtimesandthecurrenttimearesetcorrectly.  
• The monitor screen is not clear.  
* Check whether the camera's focus is properly adjusted.  
· You need to contact your local vendor for the following problems.  
- Ifanyabnormalstatusintheunitisdetectedwhiletheunitisbeingused(e.g.strangenoises,smellsor  
smoke is emitted)  
- If the power cable connector is damaged  
- If the unit is exposed to rain or water  
- If a liquid is spilled on the unit or foreign substances have got into the unit  
- If the unit doesn't work as defined in this manual  
- If the unit is dropped and seriously damaged  
- If specific changes in performance are identified  
Digital Video Recorder  
User’s Manual  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4CH/9CH Standalone Digital video recorder Specifications  
Spec.  
SVR-450  
SVR-940  
Video Input  
4BNC  
9BNC  
1BNC, 1VGA (Selectable),  
Monitor A  
1BNC, 1VGA (Selectable)  
S-Video  
VideoOutput  
Monitor B  
Compression  
-
1BNC (Single/SPOT)  
MPEG4  
Speed  
Resolution  
Multi screen  
Speed  
120fps  
720 X 480, 360 X 240  
1/4  
270fps  
Display  
Record  
720x480,720x240,360x240  
1/4/9  
Max. 120fps  
Resolution  
Mode  
704X480, 352X240  
704X480, 704X240,352X240  
Normal, Schedule, Event, TEXT  
HDD  
160GB 1EA  
250GB 1EA (Max. 2EA)  
Backup/Copy  
Serial Interface  
USB Memory Stick / CD-RW  
RS-485/422  
Alarm Input/Output  
Audio Input/Output  
4IN-1OUT  
9IN-4OUT  
4IN-1OUT  
Interface  
RJ-45(10/100 Base-t)  
TCP/IP, DHCP, PPPoE  
SNM-64S/P  
NETWORK  
Protocol  
Software  
Remote Control  
OSD  
To control up to 9 DVRs  
GUI, Multi Language Support  
Operation  
5˚~ 40˚  
Temperature  
Storage  
-10˚~ 60˚  
Power Supply  
Consumption  
Dimension  
Weight  
12V DC Adaptor  
AC100~126V/200~240V  
Approx. 25W  
65W  
430(W) X 88.8(H)X 362(D)mm  
8.9Kg  
8.9Kg  
Digital Video Recorder  
User’s Manual  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPATIBLE SATA HDD LIST  
Reconi-  
tion  
COMPANY  
MODEL  
SIZE  
RPM  
BUFFER  
Record  
Playback  
ST31000340SV  
(Surveillance)  
1TB  
7200 RPM  
7200 RPM  
7200 RPM  
16 MB  
8 MB  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
ST3500830SCE  
500 GB  
250 GB  
ST3250410AS  
(Barracuda)  
16 MB  
Seagate  
ST3250310SV  
(Surveillance)  
250 GB  
160 GB  
7200 RPM  
7200 RPM  
8 MB  
8 MB  
OK  
OK  
OK  
OK  
OK  
OK  
ST3160815AS  
(Barracuda)  
HDS721010KLA330  
HDP725050GLA360  
1TB  
7200 RPM  
7200 RPM  
32 MB  
16 MB  
OK  
OK  
OK  
OK  
OK  
OK  
HITACHI  
500 GB  
Components  
※SVR-450/940 can be connected to only SATA converter board provided with the product.  
Please refer to the install procedure of SATA HDD on the next page.  
1. SATA HDD BOARD  
2. SATA HDD  
3. SATA HDD BRACKET  
4. HDD VIBRATION ISOLATORS  
5. SCREW  
6. SATA HDD JUMPER  
Digital Video Recorder  
User’s Manual  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SATA HDD INSTALLATION  
1. Insert rubber rings to the bracket and screw the bracket to the HDD.  
2. When assemble the SATA converter board, screw on the only upper-right corner  
like the picture below.  
Need assy Screw  
3. Select "Master" or "Slave" using the Jumper switch on SATA converter board.  
Set the Master/Slave using the Jumper switch.  
In case of installing two HDDs, firstly set the Master/Slave. If One HDD is "Master", the other  
should be set to "Slave".  
JUMPER Switch  
Set the Master/Slave using Jumper switch.  
Digital Video Recorder  
User’s Manual  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Connect the E-IDE & power cables.  
a. Direction of the SATA Converter board  
b. Direction of the main power  
Sub-power cable for SATA Converter board  
Connect to the power cable  
Connect to the E-IDE HDD cable  
5. In case of installing two Hard Disk Drives.  
Check the "MASTER" or "SLAVE" on the SATA converter board.  
Connect to the power(SMPS) using power cable. (1st HDD - the main power cable, 2nd  
HDD - the sub power cable)  
When you use two HDDs, HDDs should be same model and have same interface.  
Connect with E-IDE HDD cable and power cable.  
Digital Video Recorder  
User’s Manual  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPATIBLE PATA HDD LIST  
BUF-  
FER  
Reco-  
nition  
Play-  
back  
COMPANY  
MODEL  
SIZE  
RPM  
Record  
OK  
HD-  
7200  
RPM  
80 GB  
2 M  
8 M  
8 M  
8 M  
8 M  
8 M  
8 M  
8 M  
8 M  
16 M  
2 M  
2 M  
2 M  
8 M  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
S728080PLAT20  
HD-  
7200  
RPM  
80 GB  
OK  
S721680PLAT80  
HDT722516D-  
7200  
RPM  
160 GB  
160 GB  
250 GB  
250 GB  
250 GB  
320 GB  
500 GB  
300 GB  
80 GB  
OK  
LAT80  
HDT722516D-  
7200  
RPM  
OK  
LAT80  
HDS722525V-  
7200  
RPM  
HITACHI  
OK  
LAT80  
HDT722525D-  
7200  
RPM  
OK  
LAT80  
HDT725025V-  
7200  
RPM  
OK  
LAT80  
HDT725032V-  
7200  
RPM  
OK  
LAT80  
HD-  
7200  
RPM  
OK  
S725050KLAT80  
7200  
RPM  
MAXTOR  
6L300R0  
SP0822N  
SP1604N  
OK  
7200  
RPM  
OK  
SAMSUNG  
7200  
RPM  
160 GB  
160 GB  
200 GB  
OK  
WD1600BB-22-  
7200  
RPM  
OK  
GUA0  
Western-  
Digital  
WD2000BB-00-  
7200  
RPM  
OK  
GUA0  
Digital Video Recorder  
User’s Manual  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUF-  
FER  
Reco-  
nition  
Play-  
back  
COMPANY  
MODEL  
SIZE  
RPM  
Record  
7200  
RPM  
ST3400-15ACE  
ST3800-12ACE  
ST31200-25ACE  
40 GB  
80 GB  
2 M  
2 M  
2 M  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
7200  
RPM  
7200  
RPM  
120 GB  
7200  
RPM  
ST31600-22ACE  
ST3300820ACE  
160 GB  
300 GB  
2 M  
8 M  
OK  
OK  
OK  
OK  
OK  
OK  
7200  
RPM  
7200  
RPM  
ST3300831ACE  
ST3400832ACE  
ST3400820ACE  
300 GB  
400 GB  
400 GB  
8 M  
8 M  
8 M  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
Seagate  
7200  
RPM  
7200  
RPM  
7200  
RPM  
ST3500641A  
ST3750840ACE  
ST3750640A  
500 GB  
750 GB  
750 GB  
16 M  
8 M  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
7200  
RPM  
7200  
RPM  
16 M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• SALES NETWORK  
SAMSUNG TECHWIN CO., LTD.  
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea  
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145  
SAMSUNG OPTO-ELECTRONICS UK, LTD.  
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS  
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325  
www.samsungtechwin.com  
www.samsungcctv.com  
VAN 08. 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Washer 49 1010 User Guide
RCA Microwave Oven RMW982 User Guide
RCA Portable Speaker PRO X44AV User Guide
Renesas Network Card PCA7758 User Guide
Rheem Water Heater GT 199DVN 1 User Guide
Roberts Radio Portable Radio R9962 User Guide
Roland DVR MSQ 700 User Guide
Samsung Personal Computer DP515A2GK01US User Guide
Seagate Computer Drive 100686584 User Guide
Sears Refrigerator 53471 User Guide