-,.%'/,012)301#0)43(/15641.,/1'3##)0/15/
78881',0%,'19*50/1:;<1=>
!!!"#$%&%#'"()*+!,&()*,
?@AB:7C8C
?DAB:7C8C
E8AB:7C8C
F@AB:7C8C
ECAB:7D8C
G',01*5635&
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting started
1.1 TV tour
Smart TV
To adjust the volume.
Connect your Smart TV to the Internet and you can rent a
movie from your home, browse the Net TV apps, watch
programmes you missed or check the TV guide. View your
photos and videos from your PC, tablet PC or phone.
Connect a USB Hard Drive and pause a TV broadcast or record
your favourite show.
To switch TV channels.
Read more about Smart TV in Help > Smart TV.
Read more about setting up the Internet connection in Help >
Setup > Network.
3D Full HD
To open or close the Home menu h.
Open the Home menu as a starting point to operate the TV.
In the Home menu, you can start or stop a TV activity, such as
watching TV - Watch TV - or watching a movie from a
connected DVD player.
On this TV, you can watch 3D programmes and movies in full
High Definition resolution with 3D Max.
When 3D programmes are broadcast or you start a 3D movie,
the TV switches to 3D. All you need to do is to put on your
active 3D glasses.
Read more about 3D in Help > Basics > Watch 3D.
The remote control
Getting started / TV tour
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Back È.
To open or close the FIND menu ¬.
With Back, you can go back to the previous TV channel or go
one step back in a menu.
Open the Find menu to open the list of channels while you are
watching TV channels or the list of videos and music while you
browse your PC on TV.
Red
To open or close the ADJUST menu t
With the red key, you can select the red option or open digital
Interactive TV or some TV demonstration clips.
Open the Adjust menu to quickly adjust the picture and sound
settings.
You can set the Smart picture setting to Game, which is ideal for
gaming, or change the Smart sound setting of the TV
loudspeakers.
Green
With the green key, you can select the green option or the Eco
settings.
To open or close the OPTIONS menu r.
Open the Options menu to select optional settings related to
what you are watching or doing on TV.
4
Getting started / TV tour
Download from Www.Somanuals.com. All Manuals Search And Download.
Read more about Add your devices in Help > Basics > Menus >
h Home.
Read more about using EasyLink in Help > Basics > Remote
control > Operate devices.
In the chapter Help > Connections, drawings like these will help
you to connect most common devices.
Yellow
With the yellow key, you can select the yellow option.
Blue
With the blue key, you can select the blue option.
Read more about the remote control in Help > Basics >
Remote control > Overview.
Or go to the ¬ Search page in this Help to look for any topic.
Press u to select the next TV tour.
Connecting devices
Use the HDMI™ connection to connect a DVD, Blu-ray Disc
player or game console.
The HDMI connection offers the best picture and sound quality
and, if your device has EasyLink (HDMI-CEC), the TV can add
the device to the Home menu automatically.
When a device is added to the Home menu, you can select it to
watch its programme. If the device has no EasyLink or you do
not use the HDMI connection, you must add the connected
device in the Home menu using Add your devices.
Getting started / TV tour
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HD TV
This TV can display High Definition programmes, but to enjoy
HD TV you need to get programmes in HD first. If you are not
watching HD programmes, the picture quality will be that of a
normal TV.
Watch HD TV programmes from . . .
• a Blu-ray Disc player
• a digital HD receiver connected with HDMI and with a
subscription to HD programmes
• over-the-air HD broadcasts
• channels offering HD on a digital network
• an HD game console connected with HDMI and playing an
HD game
HD video clip
To experience the stunning sharpness and picture quality of HD
TV, you can start the High Definition video clip from the Home
menu. Press Home > Setup > Watch demos (on the second
page of the Setup menu).
Contact your dealer for more information.
HD channels or providers in your country.
Satellite receiver
Next to the DVB-T and DVB-C reception, this TV has a built-in
satellite DVB-S/S2 receiver. You can connect a satellite dish
antenna and receive digital satellite channels.
Read more about Satellite Channels in Help > Setup > Satellite
channels.
6
Getting started / TV tour
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Setting up
Stand or wall mounting
The foot of the TV stand has the TV loudspeakers built-in.
Always connect the cable of the foot to the TV for sound. For
best sound, place the TV on a hard surface.
Wall mounting
With the foot and neck of the TV stand, you can mount the TV
to the wall. Combine the foot and neck to make a swivel mount
or alternatively use only the foot to mount the TV close to the
wall.
Find all mounting instructions in the Quick Start Guide that came
with the TV. In case you lost this guide, you can download the
Use the product type number of the TV to look for the Quick
Start Guide to download.
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
meet safety standards according to the TV's weight. Read also the
safety precautions before positioning the TV.
TP Vision Netherlands B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
VESA info
Your TV is prepared for a VESA-compliant wall mount bracket
(sold separately). Find the suitable VESA code next to the TV
type number.
52PFL9606 - VESA MIS-F 300,300,M6
46PFL9706 - VESA MIS-F 300,300,M6
37PFL9606 - VESA MIS-F 200,200,M6
32PFL9606 - VESA MIS-F 200,100,M6
Use a screw length as shown in the drawing.
Position the TV
Carefully read the safety precautions before you position the TV.
• Position the TV where light does not shine directly on the
screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 25 cm away from the wall for the best
Ambilight effect.
Getting started / Setting up
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk of damage to the TV!
Before you connect the TV to the power outlet, ensure that the
power voltage matches the value printed on the back of the TV.
Never connect the TV to the power outlet if the voltage is
different.
Risk of injury to children!
Follow these precautions to prevent the TV from toppling over
and causing injury to children:
• Never place the TV on a surface covered by a cloth or other
material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of the
mounting surface.
• Never place the TV on tall furniture, such as a bookcase,
without anchoring both the furniture and TV to the wall or a
suitable support.
• Teach children about the dangers of climbing on furniture to
reach the TV.
Position the TV at the ideal viewing distance. Get more from
HD TV picture or any picture without straining your eyes. Find
the 'sweet spot', right in front of the TV, for the best possible
TV experience and relaxed viewing.
Risk of swallowing batteries!
The remote control may contain coin-type batteries which can
easily be swallowed by small children. Keep these batteries out of
reach of children at all times.
The ideal distance to watch TV from is three times its diagonal
screen size. When seated, your eyes should be level with the
centre of the screen.
Risk of overheating!
Never install the TV in a confined space. Always leave a space of
at least 10 cm or 4 inches around the TV for ventilation. Ensure
curtains or other objects never cover the ventilation slots on the
TV.
For best sound, place the TV on a hard surface.
Safety
Lightning storms
Read and understand all instructions before you use the TV. If
damage is caused by failure to follow instructions, the warranty
does not apply.
Disconnect the TV from the power outlet and antenna before
lightning storms. During lightning storms, never touch any part of
the TV, power cord or antenna cable.
Risk of electric shock or fire!
Risk of hearing damage!
Avoid using earphones or headphones at high volumes or for
prolonged periods of time.
• Never expose the TV to rain or water. Never place liquid
containers, such as vases, near the TV. If liquids are spilt on or
into the TV, disconnect the TV from the power outlet
immediately. Contact Consumer Care to have the TV checked
before use.
Low temperatures
If the TV is transported in temperatures below 5°C or 41°F,
unpack the TV and wait until the TV temperature reaches room
temperature before connecting the TV to the power outlet.
• Never expose the TV, remote control or batteries to excessive
heat. Never place them near burning candles, naked flames or
other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other openings
on the TV.
Screen care
• Never place heavy objects on the power cord.
• Never touch, push, rub or strike the screen with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the TV.
• To avoid deformations and colour fading, wipe off water drops
as quickly as possible.
• Avoid force coming onto power plugs. Loose power plugs can
cause arcing or fire. Ensure that no strain is exerted on the
power cord when you swivel the TV screen.
• To disconnect the TV from the mains power, the power plug
of the TV must be disconnected. When disconnecting the power,
always pull the power plug, never the cord. Ensure that you have
full access to the power plug, power cord and outlet socket at all
times.
• Avoid stationary images as much as possible. Stationary images
are images that remain onscreen for extended periods of time.
Stationary images include onscreen menus, black bars, time
displays, etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
Risk of injury or damage to the TV!
• Two people are required to lift and carry a TV that weighs
more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the supplied stand.
Secure the stand to the TV tightly. Place the TV on a flat, level
surface that can support the weight of the TV and the stand.
Screen care 46PFL9706
Moth eye
• For excellent brightness and contrast, even in bright daylight
conditions, the screen of this TV has a Moth-eye anti-reflective
finishing. Avoid touching the TV screen as much as possible. Only
remove the protective sheet after setting up the TV.
• When wall mounted, ensure that the wall mount can safely
bear the weight of the TV set. TP Vision Netherlands B.V. bears
no responsibility for improper wall mounting that results in
accident, injury or damage.
• Parts of this product are made of glass. Handle with care to
avoid injury or damage.
8
Getting started / Setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
• For eventual cleaning of the TV screen, only use the cleaning
cloth supplied with the TV. Use an alcohol based window
cleaner for greasy stains. Apply the liquid on the cloth first before
cleaning the screen. To replace the cloth supplied, contact
Consumer Care.
The protective sheet is made from PET and is recyclable.
Temperature and humidity
In rare occasions, depending on temperature and humidity, minor
condensation can occur on the inside of the TV glass front (on
some models). To prevent this, do not expose the TV to direct
sunlight, heat or extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a few hours.
The condensation moisture will not harm the TV or cause
malfunction.
Getting started / Setting up
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Ambilight, to switch Ambilight on or off.
1.3 Keys on the TV
While the TV is on standby, you can switch Ambilight on and
create an Ambilight Lounge light effect in your room. Read more
about Ambilight and Lounge light in Help > Setup > Ambilight
Power switch
Switch the TV on or off with the power switch at the right-hand
side of the TV. When switched off, the TV does not consume
any energy.
If the red indicator light is off, switch on the TV with the power
switch.
h Home
If the red indicator is on (standby indication), press O on the
remote control to switch on the TV. Alternatively, you can
switch on the TV from standby with CH+, CH- or h. It takes a
few seconds for the TV to start up.
Press h (Home) to open the Home menu on screen. You can
navigate the Home menu with the volume - or + (left or right)
and the channel - or + (down or up) keys on the TV. To
confirm your choice, press h again.
Read more about Home in Help > Basics > Menus > h Home
V Volume
Press V (Volume) - or + to adjust the volume. Or use the +
or - keys on the remote control.
CH Channel
Press CH (Channel) - or + to switch channels. Or use the W or
X keys on the remote control.
Ambilight
10
Getting started / Keys on the TV
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 Register your TV
Congratulations on your purchase and welcome to Philips.
Register your TV and enjoy a range of benefits including full
support (including downloads), privileged access to information
about new products, exclusive offers and discounts, the chance to
win prizes and even participate in special surveys about new
releases.
Go to www.philips.com/welcome
Getting started / Register your TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5 Help and support
Using Help and Search
Help
You can open Help from the Home menu. In most cases, you
can also press the yellow key on your remote control to open
or close Help directly. For some activities, like Text, the colour
keys have specific functions and cannot open Help.
Before you follow the Help instructions, close Help. Press the
yellow key or press h to close Help. When you press the
yellow key again, Help will open on the page where you closed
it.
¬ Search
In Help, use ¬ Search to find a topic you need. Select a topic
from the list with the navigation keys and press OK. The topic
you are looking for might not be on the first page but a few
pages further on. Press x to go to the next page.
Online support
To solve any Philips TV related problem, you can consult our
online support. You can select your language and enter your
product model number.
Go to www.philips.com/support
On the support site you can find your country's telephone
number to contact us as well as answers to frequently asked
questions (FAQs).
You can download new TV software or the manual to read on
your PC. You can email a specific question or, in some countries,
chat online to one of our collaborators.
Consumer Care
For support, you can call the Consumer Care hotline in your
country. Find the telephone number in the printed documentation
that came with the TV.
Or consult our website www.philips.com/support
TV model number and serial number
You might be asked to provide the TV product model number
and serial number. Find these numbers on the packaging label or
on the type label on the back or bottom of the TV.
12
Getting started / Help and support
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Basics
2.1 Remote control
Overview
8 CH- / Previous X
To switch to the previous channel, page or chapter.
9 Source Ú
To switch directly to a TV connection.
10 Options r
To open or close the Options menu.
1 Standby O
To switch the TV on or back to standby.
2 Home h
To open or close the Home menu.
3 Navigation key
To navigate up, down, left or right.
4 OK key
To activate a selection.
11 Back È
To go back to the previous channel. To exit a menu without
changing a setting. To go back to the previous Text or Net TV
page.
12 Volume V
To adjust the volume level.
13 Mute m
To mute the sound or to restore it.
5 Find ¬
To open or close the channel list or your list of photos, music or
movies.
6 Adjust t
To open or close the most used settings for picture, sound,
Ambilight or 3D.
7 CH+ / Next W
To switch to the next channel, page or chapter.
Basics / Remote control
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Red colour key
To open interactive TV or to select a Text page.
15 Green colour key
To open the Eco settings or to select a Text page.
16 Yellow colour key
To select a Text page.
17 Blue colour key
To select a Text page.
In general, these keys open the following device menus:
1 Home menu
2 Setup menu
3 Disc menu (disc content)
4 Pop-up menu
5 Options menu
6 Programme guide
7 Media selection
18 Number keys and text keypad
To select a TV channel directly or to enter text.
19 Format / Subtitles
To open or close the Format menu. / Keep this key pressed for
3 seconds to show or hide subtitles.
One Touch Play
Insert a disc into an EasyLink HDMI-CEC device and press Play
on the device. The TV switches on from standby and starts
playing the disc.
20 Text / Info
To open or close text. / Keep this key pressed for 3 seconds to
open or close information on next programmes.
System Audio Control
If you connect an EasyLink audio system, you can listen to the
audio from the TV through the audio system. The TV speakers
are muted automatically. You can control the volume of the
audio system with the TV remote control.
Operate devices
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and have it
switched on. The device must also be connected with an HDMI
cable.
Surround mode
With recent Philips devices, you can change the surround sound
setting of the device on the TV. To change this setting, press t
ADJUST, select Surround mode and press OK. On Next mode,
press OK to toggle through the available modes on the device.
Operate an EasyLink device
To operate such a device with the TV remote control, select the
device -or its activity- in the h Home menu and press OK.
The commands of all keys, except the h key, the t ADJUST
key and the r OPTIONS key, are forwarded to the device.
Smart sound
With recent Philips devices, you can change the Smart sound
setting of the device on the TV. To change this setting, press t
ADJUST, select Smart sound and press OK. Select a sound
mode from the list.
Switch back to TV
To switch the remote control back to operate the TV, press h
(Home) and select Watch TV and press OK.
Screen off
If a recent Philips audio device only sends audio to the TV, the
device may suggest switching off the TV screen. To switch off
the screen when this message appears, select Screen off and
press OK. To switch the screen back on, press h (Home).
Show device keys
When operating a device, some of the keys might not be
available on the TV remote control. To make these keys
selectable on TV, press r OPTIONS and select Show device
keys. Select the key you need and press OK.
System Standby
Press O on the remote control to switch the TV and all
EasyLink devices to standby.
To hide the device keys, press È (Back).
Read more about EasyLink in Help > Setup > Devices >
EasyLink HDMI-CEC.
IR sensor
Always make sure you point the remote control at the remote
control infrared sensor on the front of the TV.
14
Basics / Remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
To replace the batteries of the remote control, slide open the
small tray at the bottom of the remote control. Use 2 coin-
shaped batteries (Type CR2032 – 3V). Make sure the + side of
the batteries (top side) point upwards. The small tray has a +
indicator.
Remove the batteries if you are not using the remote control for
a long time.
Dispose of batteries according to the end of use directives. Read
Help > Specifications > Environmental > End of use.
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the TV or remote control.
Basics / Remote control
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reorder
2.2 Menus
To reorder a device or an activity in the Home menu, select it
and press r OPTIONS.
1 Select Reorder.
2 With the navigation keys, reposition the device or activity
where you want it. You can only reorder the sequence of the
added devices and activities.
h Home
In the Home menu, you start watching TV or start watching a
movie disc or any other TV activity.
Press h to open the Home menu.
To start an activity, select it with the navigation keys and press
OK.
To close the Home menu, press h again.
3 Press OK to confirm the position. All devices and activities shift
to the right.
You can highlight another device or activity and reposition it.
To stop Reorder, press r OPTIONS and select Exit reorder.
Restore device activities
To recall a deleted activity from a device with several activities,
select the device or one of its activities and press r OPTIONS.
Select Restore device activities and press OK. All deleted
activities of this device appear again.
¬ FIND
With ¬ FIND you open the Channel list while you are
watching TV channels or you open the list of pictures, music and
videos while browsing your PC or connected USB device.
Press ¬ FIND to open the list.
To close the list, press ¬ again.
Add your devices
A connected device should be added to the Home menu for
easy selection.
If your connected device does not have EasyLink (HDMI-CEC)
or is not connected with an HDMI cable, you need to manually
add your device to the Home menu with Add your devices.
Devices with EasyLink (HDMI-CEC) and connected with an
HDMI cable automatically show their activity in the Home menu.
A single device can add several activities.
If an EasyLink device does not appear automatically, EasyLink on
the device may be switched off.
Add a device manually
In the Home menu, select Add your devices and press OK.
Follow the instructions on screen.
The TV asks you to select the device and the connection to
which the device is connected.
The device or its activities are now added to the Home menu.
t ADJUST
With the ADJUST menu, you can adjust picture, sound,
Ambilight and 3D settings quickly.
Rename a device
To rename an added device or activity, select the device in the
Home menu and press r OPTIONS and select Rename. Use
the keypad on the remote control as you do for SMS/text
messaging to enter the new name.
Press t ADJUST to open the Adjust menu.
Select your choice with the navigation keys and press OK.
To close the menu, press t ADJUST again.
Remove a device
To remove a device or activity from the Home menu, select it
and press r OPTIONS and then select Remove this device. If
a device or activity keeps appearing in the Home menu after you
deleted it, switch off the EasyLink setting on the device to
prevent the icon from being automatically added again.
Read more about EasyLink in Help > Basics > Remote control >
Operate devices.
16
Basics / Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Adjust menu you can adjust these settings:
• 3D
• 3D depth
• Two player gaming
• Ambilight On or Off
• Ambilight dynamics
• Picture format
• Smart picture (presets)
• Smart sound (presets)
• Speakers
• Surround
• Picture shift
Ambilight
Read more about the Ambilight settings in Help > Setup >
Ambilight.
Picture format
Read more about the Picture format settings in Help > Basics >
Watch TV > Picture format.
Smart picture, Smart sound
You can set the TV to the pre-defined setting that best suits
what you're watching.
Read more about Smart settings in Help > Basics > Watch TV
> Smart picture and sound.
Speakers
To hear the sound through the TV speakers, close Help, press t
ADJUST, select Speakers and select TV.
Select Amplifier if you want to hear the sound through a
connected Home Theatre System or Amplifier.
These settings temporarily override any EasyLink settings.
Surround
To switch the TV automatically to the best surround sound mode
(only available when a Home Theatre System is connected), close
Help, press t ADJUST, select Surround and select On.
Picture shift
You can shift the picture on screen in a vertical or a horizontal
direction to view subtitles fully (depending on the TV input).
While watching TV, press t ADJUST, select Picture shift and
press OK. Shift the picture with the navigation keys. Press OK to
stop Picture shift.
r OPTIONS
With the OPTIONS menu, you select optional settings related to
what you are watching or doing on TV.
Press r OPTIONS at any time to see which options are
available.
To close the menu, press r OPTIONS again.
Basics / Menus
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Video selection
2.3 Watch TV
Digital TV channels can offer multi video signals (multi-feed
broadcasts), different camera viewpoints or angles of the same
event or different programmes on one TV channel. The TV
shows a message to advise if any such TV channels are available.
When available, press r OPTIONS and select Video selection
to select your choice.
Switch channels
To watch TV and switch channels, make sure the Watch TV
option is selected in the Home menu.
To watch TV, press h, select Watch TV and press OK.
Channel list
In the Channel list, you can look up all installed TV and radio
channels.
While watching TV, press ¬ FIND to open the Channel list.
Press ¬ FIND again or È (Back) to close the Channel list
without changing the channel.
In the Channel list, you can navigate to a TV channel or radio
station and press OK to watch the TV channel or listen to the
radio station.
The Channel list can have several pages. To view the next or
previous Channel list page, press W or X.
To switch channels, press CH+ or CH- on the remote control.
You can use the number keys if you know the channel number
or press ¬ FIND to open the Channel list to select a channel.
Channel list options
With the Channel list on screen, press r OPTIONS to select
the following options:
• Select list
To switch back to the previous channel, press È (Back).
• Mark as favourite
• Reorder
• Rename
Radio channels
If digital broadcasting is available, digital radio stations are installed
during installation. Switch to a radio channel just like you switch
to a TV channel. A DVB-C channel installation usually places radio
stations from channel number 1001 onwards.
Select list
Options for watching TV channels
Use this option to select which channels are shown in the
Channel list. The list you select here determines which channels
you flick through with CH+ and CH-.
If you watch digital broadcast TV channels, press r OPTIONS
to view the available options:
• What's on
• Status
• Video selection
Mark as favourite
When a channel is highlighted in the Channel list, you can set it
as a favourite channel.
What's on
Read Basics > Watch TV > Favourite channels.
This option shows information on the current and next
programme on this channel. Use the navigation keys to scroll
through text or to go to the next column.
Status
Depending on the broadcast, the Status page will show relevant
information. You can use this information to improve the channel
signal or to check if certain services are available.
Reorder
You can reposition channels within the list.
1 Press r OPTIONS and select Reorder to start reordering
channels.
2 Highlight a channel and press OK.
3 Reposition the channel where you want it with the navigation
keys. Alternatively, enter the new position directly with the
number keys.
18
Basics / Watch TV
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press OK to confirm the position. You can insert the channel
or swap it.
You can highlight another channel and do the same.
To stop Reorder, press r OPTIONS and select Exit reorder.
Rename
You can rename a channel in the Channel list.
1 In the channel list, highlight the channel you want to rename.
2 Press r OPTIONS and select Rename to start renaming. You
can enter text directly with the remote control keypad or open a
full keyboard on top of the text entry menu.
Favourite channels
In the Channel list you can mark a channel as a favourite. You
can set the Channel list to only zap through your list of favourite
channels.
To open the Channel list, while you are watching TV channels,
press ¬ FIND.
Enter text with the remote control keypad
Use the navigation keys to position the cursor in the text. Press
È (Back) to delete a character.
Mark a channel as favourite
Use the remote control keypad as you do for SMS/text
messaging to enter a character. Use the 1 key to select a special
character. Select Clear to delete a character.
Select Done to end Rename.
While watching TV, press ¬ FIND to open the Channel list.
Navigate to the channel you want to mark as favourite and press
r OPTIONS. Select Mark as favourite.
In the Channel list, the favourite channel is marked with a F.
You can unmark a favourite channel with Unmark favourite.
Enter text with the on-screen keyboard
To open the on-screen keyboard on top of the text entry menu,
press OK when the cursor in the text flashes.
On the keyboard, use the navigation keys to highlight a character
and press OK to enter it. To delete a character, press È (Back)
or highlight ! and press OK.
Channel list of favourites
You can set the Channel list to only flick through your favourite
channels.
With the list on screen, press r OPTIONS and select Select
list. Select Favourites from the list and press OK. With this list
selected, you will only flick through your favourites.
To switch from uppercase to lowercase or to a set of special
characters, press W (Next) or X (Previous).
To edit a character within a line of text, position the cursor on
this character and use the z and Z keys at both ends of the
on-screen spacebar.
Programme guide
If programme guide information is available in your area, you can
open an on-screen programme guide with scheduled TV
programmes.
To close the on-screen keyboard, highlight Done and press OK.
USB keyboard
You can use a connected USB keyboard to rename channels. To
connect a USB keyboard, read Help > Connections > Connect
more devices > Keyboard and mouse.
The Programme guide is provided by the broadcaster or Internet.
Basics / Watch TV
19
Download from Www.Somanuals.com. All Manuals Search And Download.
For easy picture or sound adjustment, you can select a preset
setting for each.
While watching TV, press t ADJUST to open the Adjust menu
and select Smart picture or Smart sound. Make a selection from
the list and press OK.
Open the Programme guide
While watching TV, press h, select Programme guide and press
OK.
To quit the Programme guide without changing a setting, press
È (Back).
First use
The first time you open the Programme guide, the TV scans all
TV channels for programme guide information. This can take
several minutes. The data is stored in the TV. The TV can store
programme data for up to eight days.
Smart picture and Smart sound
Smart settings are a combination of preset settings suited to a
specific use such as gaming or daylight viewing.
You can adjust a specific setting, like Brightness or Contrast, Bass
or Treble, of a chosen smart setting. The smart setting will
remember the adjustments you made.
Programme guide options
With a programme selected in the guide, press r OPTIONS to
select the following:
• Set reminder
To set an on-screen reminder for when a programme is due to
start, select Set reminder and press OK. The programme is
marked with a © (Clock). To cancel this reminder, select Clear
reminder and press OK.
Adjust smart settings
To adjust a specific setting of a smart setting, select the smart
setting and press OK. Then press h and select Setup. Select
TV settings, navigate to the individual setting and adjust it.
• Change day
View the previous or next day's programmes.
• More info
Shows the programme details and summary.
• Search by genre
To return to the original smart setting values, undo the
adjustments you made by first setting the TV in the smart setting
you want to reset. Then press h > Setup > TV settings, select
Reset and press OK.
View all programmes selected by genre.
Read more about adjusting separate settings in Help > Setup >
Picture and Sound and Ambilight.
• Scheduled reminders
If a reminder is set, you can view a list of all scheduled
reminders.
Smart picture list
• Personal - Your choices made in Personalise picture and sound
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Cinema - Ideal for watching movies
• Game - Ideal for gaming
• Update programme guide
After the first scan, the TV stores the programme guide data. If
you update or reinstall channels or reorder the Channel list, you
will need to update the Programme guide.
To update, select Update programme guide. Reminders are
cleared.
• Energy saving - Energy-conscious settings
• Standard - Factory standard settings
• Photo - Ideal for viewing photos
• ISF Day and ISF Night - ISF Calibration settings
Broadcaster or Network
To select where the Programme guide information comes from,
press h > Setup > TV settings > Preferences > Programme
guide.
Smart sound list
• Personal - Your personal choices made in Personalise picture
and sound
Select From the network or From the broadcaster.
• Standard - Factory standard
• News - Ideal for speech
• Movie - Ideal for watching movies
• Game - Ideal for gaming
• Drama - Ideal for TV soaps
• Sports - Ideal for sports programmes
From the network
Until you link up with Net TV, programme guide information
comes from the broadcaster. Once you are connected with Net
TV, the TV switches automatically to the Internet for programme
guide information.
From the broadcaster
Guide information comes from the broadcaster/operator.
Picture format
Smart picture and sound settings
20
Basics / Watch TV
Download from Www.Somanuals.com. All Manuals Search And Download.
If black bars appear on the screen, you can adjust the picture
format to a format that fills the screen.
While watching TV, press t ADJUST to open the Adjust menu
and select Picture format. Select a format from the list and press
OK.
Picture formats
The following formats are available according to the picture on
screen:
• Auto fill
Automatically enlarges the picture to fill the screen. Minimal
picture distortion, subtitles remain visible. Not suitable for PC
input.
• Auto zoom
Automatically zooms the picture in to fill the screen as much as
possible without distortion. Black bars may be visible. Not suitable
for PC input.
• Super zoom
Removes the black bars on the side of 4:3 broadcasts. The
picture is adjusted to fit the screen.
• Movie expand 16:9
Scales the picture to a 16:9 format.
• Wide screen
Stretches the picture to a 16:9 format.
• Unscaled
Expert mode for HD or PC input. Pixel for pixel display. Black
bars may appear with pictures from a PC.
Switch to standby
If the TV is on, press O on the remote control to switch to
standby. The red standby key indicator is on.
Although the TV consumes very little power when on standby,
energy does continue to be consumed.
When you do not use the TV for an extended period of time,
switch the TV off completely with the power switch.
Auto switch off
If you use the TV as a monitor or use a digital receiver to watch
TV (a set top box - STB) and you do not use the remote
control of the TV, switch off the automatic switch off.
This will prevent the TV from switching off automatically after a
4-hour period without a key press on the remote control of the
TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
Basics / Watch TV
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 3D
To stop the 2D to 3D conversion, select 2D in the 3D menu or
switch to another activity in the Home menu. The conversion will
not stop if you switch between TV channels.
What you need
3D depth
This is a 3D Max TV. To watch 3D on this TV, you will need
the Philips 3D Max active glasses PTA516 (sold separately).
Other active 3D glasses might not be supported.
You can change the depth of 3D for a weaker or stronger 3D
effect.
To set the 3D depth, press t ADJUST and select 3D depth.
Use the slider bar to set the 3D depth and press OK.
To ensure the IR reception of the glasses, clear objects away
from the 3D transmitter on the TV.
Specifics
• If a 3D TV broadcast is switched to 2D, the TV shows only
the 3D-left picture.
• 3D is not available in Multi view
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that you:
• sit at least 3 times the height of the TV screen away from the
TV, but no further than 6 metres away.
• avoid fluorescent lighting (such as TL lighting or certain energy
saving light bulbs which operate on a low frequency) and direct
sunlight as they may interfere with the 3D experience.
Watch 3D
To start watching a 3D movie or programme, insert a 3D movie
into a 3D Blu-ray Disc player or tune to a TV channel that
broadcasts programmes in 3D.
Press h (Home) and select the 3D Blu-ray Disc player or
select Watch TV and tune to the TV channel.
Health warning
• If you or your family has a history of epilepsy or photosensitive
seizures, consult a medical professional before exposing yourself
to flashing light sources, rapid image sequences or 3D viewing.
• To avoid discomfort such as dizziness, headache or
disorientation, we recommend not watching 3D for extended
periods of time.
Start 3D
The TV can detect when 3D is available. When the 3D message
appears, select Start 3D and press OK. Put on the 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
screen.
If you experience any discomfort, stop watching 3D and do not
immediately engage in any potentially hazardous activity (for
example driving a car) until your symptoms have disappeared. If
symptoms persist, do not resume watching 3D without consulting
a medical professional first.
To switch the double image to 3D, press t ADJUST, select 3D
and select Side by side or Top / bottom according to the double
image positions.
You might need to select the inverted format if the normal
format results in strange 3D effects.
• Parents should monitor their children during 3D viewing and
ensure they do not experience any discomfort as mentioned
above. Watching 3D is not recommended for children under 6
years of age as their visual system is not fully developed yet.
Stop 3D
To stop watching 3D, press t ADJUST and select 2D in the
3D menu.
You can also stop 3D when you switch to another channel or
connected device.
• Do not use the 3D glasses for any purpose other than
watching 3D TV.
• CHOKING HAZARD - Do not let children under 6 years of
age play with the 3D glasses, they could choke on the battery lid
or battery (if present).
2D to 3D conversion
You can convert any 2D programme to watch it in 3D.
To convert a 2D programme to 3D, press t ADJUST, select
3D and select 2D to 3D conversion.
Cleaning and care
22
Basics / 3D
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not expose the 3D glasses to direct sunlight, heat, fire or
water. This may result in a product malfunction or fire.
• Use a clean soft cloth (microfibre or cotton flannel) to clean
the lenses to avoid scratching them. Never spray cleaner directly
onto the 3D glasses. This may damage the electronics.
• Do not drop, bend or apply force to the lenses of the 3D
glasses.
• Do not use cleaning chemicals containing alcohol, solvent,
surfactant, or wax, benzene, thinner, mosquito repellent or
lubricant. Using these chemicals can cause discoloration or cracks.
Basics / 3D
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Watch satellite
Switch channels
To watch satellite channels, press h (Home), select Watch
satellite and press OK.
Channel list pages
The Channel list can have several pages. To view the next or
previous Channel list page, press W or X.
To switch satellite channels, press CH+ or CH- on the remote
control. You can use the number keys if you know the channel
number or you can use the channel list to select a channel.
Options
With the Channel list on screen, press r OPTIONS to select :
• TV / Radio
• Select list
• Sort
To switch back to the previous channel, press È (Back).
• Mark as favourite
• Rename
• Reorder
• Channel lock
TV / Radio
Set the list to show TV or radio channels.
Select list
Select the list of channels from all satellites or from one specific
satellite. Or show a list of only your favourite satellite channels.
The list you select here determines which channels you will flick
through with CH+ and CH- while watching satellite.
Sort
You can sort the Channel list by Name, Number or in groups of
free-to-air and scrambled channels – Free / scrambled.
Channel list for satellite
When a satellite installation is completed, the satellite channels
are stored in a specific channel list for satellite.
Read more about using the Channel list in Help > Basics >
Watch satellite > Channel list.
Mark as favourite
When a channel is highlighted in the Channel list, you can set it
as a favourite channel.
Read Help > Basics > Watch satellite > Favourite channels.
Channel list
Reorder
To open the Channel list, while watching satellite broadcast, press
¬ FIND. Select a channel with the navigation keys and press
OK to switch to the channel.
You can reposition channels within the list.
1 Press r OPTIONS and select Reorder to start reordering
channels.
2 Highlight a channel and press OK.
3 Reposition the channel where you want it with the navigation
keys. Alternatively, enter the new position directly with the
number keys.
To leave the Channel list without changing the channel, press È
(Back).
4 Press OK to confirm the position. You can insert the channel
or swap it.
You can highlight another channel and do the same.
To stop Reorder, press r OPTIONS and select Exit reorder.
Rename
You can rename a channel in the Channel list.
1 In the channel list, highlight the channel you want to rename.
2 Press r OPTIONS and select Rename to start renaming. You
can enter text directly with the remote control keypad or open a
full keyboard on top of the text entry menu.
24
Basics / Watch satellite
Download from Www.Somanuals.com. All Manuals Search And Download.
Mark as favourite
In the Channel list, navigate to a channel you want to mark as
favourite and press r OPTIONS. Select Mark as favourite. In
the list, the favourite channel is marked with a F. You can
unmark a favourite channel with Unmark favourite.
Channel list of favourites
You can set the Channel list to only show your favourite
channels.
With the list on screen, press r OPTIONS and select Select
list. Select Favourites from the list and press OK. With this list
selected, you can flick through your favourite channels with CH+
and CH- while watching satellite.
Read more about the options in the Channel list for satellite in
Help > Basics > Watch satellite > Channel list.
Channel lock
To prevent children from watching, you can lock channels. To
unlock, you enter the 4-digit child lock code.
Lock channels
You can lock channels in the Channel list.
To open the Channel list, press ¬ FIND. To lock channels,
press r OPTIONS and select Channel lock.
Enter text with the remote control keypad
Use the navigation keys to position the cursor in the text. Press
È (Back) to delete a character.
Use the remote control keypad as you do for SMS/text
messaging to enter a character. Use the 1 key to select a special
character. Select Clear to delete a character.
Select Done to end Rename.
Enter your 4-digit child lock code. Select any channel in the list,
press r again and select Lock channel. A locked channel is
marked with a k (Lock). You can select another channel to lock
or unlock.
To exit Channel lock, press r and select Exit.
Change code
Enter text with the on-screen keyboard
To change the current code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
To open the on-screen keyboard on top of the text entry menu,
press OK when the cursor in the text flashes.
On the keyboard, use the navigation keys to highlight a character
and press OK to enter it. To delete a character, press È (Back)
or highlight ! and press OK.
Forgotten your code?
To override the code in case you forget it, enter 8888.
To switch from uppercase to lowercase or to a set of special
characters, press W (Next) or X (Previous).
To edit a character within a line of text, position the cursor on
this character and use the z and Z keys at both ends of the
on-screen spacebar.
Age-rated programmes
To prevent children from watching programmes not suitable for
their age, you can set an age rating (a parental rating).
To close the on-screen keyboard, highlight Done and press OK.
Programmes with an equal or higher rating will be locked. To
unlock the programme, you must enter the 4-digit child lock
code. Not all programmes are rated. The age rating is set for all
satellite channels.
Set an age rating
Press h and select Setup > Satellite settings and select Parental
rating.
To select an age rating, you must first enter your 4-digit child
lock code. If no child lock code is set yet, you can set the code
now.
When the code is entered, you can select the age rating. When
the rating of a programme is equal or higher than the rating you
have set for your child's age, the programme will be locked. The
TV will ask for the code to unlock the programme. For some
operators, the TV only locks programmes with a higher rating.
Favourite channels
Change code
To change the current code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
You can set up your own list of favourite satellite channels.
Basics / Watch satellite
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Forgotten your code?
To override the code in case you forget it, enter 8888.
26
Basics / Watch satellite
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 Connected devices
Select a device
Select from the Home menu
To select and watch a connected device or activity, press h to
open the Home menu and select the device or its activity and
press OK. Make sure the device is switched on.
Add a connected device to the Home menu for easy selection.
Read more about Add your devices in Help > Basics > Menus >
Home menu.
Select from the list of connections
To open the list of connections, press Ú SOURCE. Select the
TV connection and press OK to switch to the device on that
connection. Make sure the device is switched on.
In general, these keys open the following device menus:
1 Home menu
2 Setup menu
3 Disc menu (disc content)
4 Pop-up menu
5 Options menu
6 Programme guide
7 Media selection
Read more about EasyLink in Help > Setup > Devices >
EasyLink HDMI-CEC.
Operate devices
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and have it
switched on. The device must also be connected with an HDMI
cable.
Operate an EasyLink device
To operate such a device with the TV remote control, select the
device -or its activity- in the h Home menu and press OK.
The commands of all keys, except the h key, the t ADJUST
key and the r OPTIONS key, are forwarded to the device.
If the key you need is not on the TV remote control, you can
show extra keys on screen with Show device keys.
Show device keys
To show the device keys on screen, press r OPTIONS and
select Show device keys. Select the key you need and press OK.
To hide the device keys, press È (Back).
Basics / Connected devices
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Child locks
2.7 Subtitles, timers and locks
To prevent children from watching a channel or a programme,
you can lock channels or lock age-rated programmes.
Subtitles
Programme subtitles are available most of the time. You can
switch subtitles on or off. How to set subtitles depends on
whether a channel is analogue or digital.
Parental rating
Some digital broadcasters have rated their programmes. When
the rating is equal or higher than the rating you have set for your
child's age, the programme will be locked.
Switch on subtitles
To open the Subtitle menu, press SUBTITLE. You can switch
subtitles On or Off. Select On during mute to show subtitles only
when the sound is muted with m.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
Set an age rating
Press h and select Setup > Channel settings and select Child
lock > Parental rating.
To select an age rating, you must first enter your 4-digit child
lock code. If no child lock code is set, you can set the code
now.
When the code is entered, you can select the age rating. When
the rating of a programme is equal or higher than the rating you
have set for your child's age, the programme will be locked. The
TV will ask for the code to unlock the programme. For some
operators, the TV only locks programmes with a higher rating.
Lock a channel
To lock a channel, press h and select Setup > Channel settings
and select Child lock > Channel lock. In the list of channel
numbers, select a channel and press OK to lock a channel.
For analogue channels
In the list, a locked channel is marked with an X. Now, you can
select another channel to lock or unlock. The lock is activated as
soon as you close the menu.
To make subtitles available for a channel, switch to the channel
and press TEXT to open Text. Enter the page number for
subtitles, usually 888, and press TEXT again to close Text. With
subtitles switched on in the Subtitle menu, subtitles will be shown
if available. Each analogue channel must be set up separately.
You cannot lock programmes from connected devices.
Change code
For digital channels
There is no need to activate subtitles in Text for digital channels.
You can set a preferred primary and secondary subtitle language.
If these subtitle languages are not available for a channel, you can
select another available subtitle language.
To change the current lock code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
Forgotten your code?
To override the code if you forget it, enter 8888.
To set the primary and secondary subtitle language, press h and
select Setup > Channel settings and select Languages > Primary
and Secondary subtitles.
Sleep timer
To select a subtitle language when none of your preferred
languages is shown, press r OPTIONS, select Subtitle language
and select a language you want temporarily.
With the sleep timer, you can set the TV to switch to standby
automatically after a specified time.
To set the sleep timer, press h > Setup > TV settings >
Preferences > Sleep timer. With the slider bar you can set the
time up to 180 minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.
Audio languages
Digital TV channels can broadcast audio that transmits several
languages for a programme. You can set the TV to switch to
your preferred language if it is available.
You can always switch off your TV earlier or reset the time
during the countdown.
Set your language
To set your preferred audio language, press h and select Setup
> Channel settings and select Languages > Primary and
Secondary audio. The TV will automatically switch to one of your
languages, if one of them is available.
To check if an audio language is available, press r OPTIONS
and select Audio language. You can select another audio language
from the list.
Some digital TV channels broadcast special audio and subtitles
adapted for people who are hearing or visually impaired. Read
Help > Setup > Universal access.
28
Basics / Subtitles, timers and locks
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Smart TV
3.1 Net TV
What is Net TV?
Net TV offers Internet applications called apps. These apps are
tailored for your TV. With these apps you can read your
national newspaper, look at infotainment, or rent a movie from a
video store or watch programmes you missed with catch-up TV
apps. A wide range of Net TV apps are available depending on
your country.
Smart USB Recording
With your TV connected to the Internet, you can also record
programmes from the TV programme guide. To record
programmes, you must connect a USB Hard Disk Drive to your
TV. (Only in selected countries.)
Net TV specifics
• The availability of Net TV apps varies per country.
• With Net TV, you can view any Internet website you like but
most of them are not tailored for a TV screen and some plug-ins
(e.g. to view pages or videos) are not available on your TV.
Keyboard and mouse
To enter text or to navigate a page, you can connect a USB
keyboard and a USB mouse to the TV. The USB mouse can only
navigate pages on the Internet, it cannot navigate Net TV app
pages.
• Net TV apps can be added, changed or stopped.
• Net TV shows one page at a time and full screen.
• You cannot download and save files or install plug-ins.
Read more about connecting a keyboard or mouse in Help >
Connections > Connect more devices > Keyboard and mouse.
Net TV forum website
Find out more on Net TV apps at the Net TV forum website.
TP Vision Netherlands B.V. bears no responsibility regarding the
content and the quality of the content provided by the content
service providers.
What you need
To enjoy Net TV you must connect the TV to a router with a
high-speed (broadband) connection the Internet. You can use a
home network connected to the Internet. You do not need a
computer.
Read more about connecting to your home network in Help >
Setup > Network.
Configure
The first time you open Net TV, you must agree to the terms
and conditions before you can continue. Press OK to agree.
Press È (Back) to quit Net TV.
Register
If you agree, you can register with Club Philips. Select Register
and press OK. Enter your email address, select Continue and
press OK. Confirm the email address.
Smart TV / Net TV
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control
Reload an app or page
To lock Adult 18+ rated apps, switch on Net TV parental
control by selecting Enable and then press OK. Enter an unlock
PIN code of your choice. Confirm your PIN code.
Adult 18+ rated apps are now locked.
To retry loading an app or an Internet page, press r
OPTIONS and select Reload page.
Security info
To view the level of security of the page you're on, press r
OPTIONS and select Security info.
To open a locked app, select the app and press OK. The TV will
ask you to enter your 4-digit code.
Internet websites
To browse Internet websites, select the Internet app on the Net
TV home page and press OK.
To open the on-screen keyboard, select a text entry field and
press OK.
To remove a visited website from the list, press r OPTIONS
and select Remove from History.
Clear Net TV memory
To redo the Net TV configuration and to clear all passwords, PIN
codes, history and cookies, press h (Home), select Setup >
Network settings > Clear Net TV memory.
Net TV apps
Rent a movie
Open Net TV
To open Net TV, press h (Home), select Browse Net TV and
With the video store apps in Net TV, you can rent your
favourite movie from an online rental video store. You can pay
securely with your credit card.
1 Open a video store app.
press OK.
To close Net TV, press h (Home) and select another TV
activity.
2 Select a video.
3 Make the online payment.
The Net TV home page
When you open Net TV, the home page is shown.
To navigate the page, press u, v, w or x.
To open an app, select the app and press OK.
To go back 1 step, press È (Back).
4 Download the video.
5 Start watching.
What you need
To rent and download a video, you need a high-speed
(broadband) Internet connection to the TV. You also need an SD
memory card.
Read more about connecting to the network in Help > Setup >
Network.
The home page
1 The App Gallery
2 Your Apps
3 The Internet App
4 Current TV channel
Video memory
To download a video, you must format an SD memory card as
video memory. Insert the SD card into the SD card slot on the
side of the TV. The TV starts formatting the SD card
automatically. The SD card may be rejected if the write speed is
insufficient for video transfer. Once formatted, leave the card
permanently in the slot.
The App Gallery
To look for apps to add to your home page, select App Gallery
and press OK.
SD memory card size
Use a SD HC (High Capacity) memory card with at least 4GB of
storage capacity.
For high-definition (HD) video, use an SD card with at least 8GB
of storage capacity. Use a speed class 2 card or more.
To add an app to the home page, select an app in the list and
press Add.
To search per category, select the category field (All) and press
OK.
Open a video store app
To open the on-screen keyboard, select a text entry field and
press OK.
To switch to the app gallery of another country, select the
country field and press OK.
To open a video store, press h (Home), select Net TV and
press OK. Select a video store app from the Net TV home
page. Select the video store and press OK. You can add a video
store app on your home page from the app gallery. Availability
of video stores varies by country.
Lock or remove an app
To lock or remove an app, select the app and press r
OPTIONS. Select the option and press OK.
30
Smart TV / Net TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Rent a video
When you open a video store you will be asked to log in or to
create a log in account. With a text entry field selected, press
OK to open the on-screen keyboard.
Consult the video store website for more information.
Online TV
With the online TV apps in Net TV you can watch programmes
you missed. Most often, you can recognise such an online TV
app by its broadcaster’s logo.
What you need
To watch online TV programmes, you need a high-speed
(broadband) Internet connection to the TV.
Read more about connecting to the network in Help > Setup >
Network.
Watch online TV
To watch an online TV programme in Net TV, press h
(Home), select Browse Net TV and press OK. Select the
broadcaster app on the Net TV home page and press OK. You
can add a online TV broadcaster app on your home page from
the app gallery.
Start a programme
Select a programme from the online TV app page and press OK.
Most often, you can use the x (Play) or U (Pause) keys on your
remote control.
Smart TV / Net TV
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Interactive TV
What is iTV?
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
On some pages, you can respond to a programme or vote, do
online shopping or pay for a video-on-demand programme.
HbbTV, MHEG, MHP, DTVi, . . .
Broadcasters use various interactive TV systems : HbbTV (Hybrid
Broadcast Broadband TV) or iTV (Interactive TV - MHEG).
Interactive TV is sometimes referred to as Digital Text or Red
button. But each system is distinct.
Visit the broadcasters Internet website for more information.
What you need
Interactive TV is only available on digital TV channels. To enjoy
the full benefits of Interactive TV, you need a high-speed
(broadband) Internet connection to the TV.
Read more about connecting to the network in Help > Setup >
Network.
Open iTV pages
Most channels that offer HbbTV or iTV invite you to press the
red key or OK key to open their interactive programme.
Close iTV pages
Most iTV pages inform you which key to use to close.
For Digital Text and Red button, press È (Back).
To force an iTV page to close, switch to the next TV channel
and switch back.
Navigate iTV pages
You can use the navigation and colour keys, the number keys and
the È (Back) key to navigate the iTV pages. You can use the x
(Play), U (Pause) and S (Stop) keys to watch videos within iTV
pages.
Digital Text (UK only)
To open Digital Text, press TEXT. To close, press È (Back).
HbbTV links
Some HbbTV pages have links to the Internet. Your TV switches
to Net TV to view these Internet websites. To switch back to
normal TV viewing, you might need to press h (Home) and
select Watch TV again to continue watching the TV channel.
Block HbbTV pages
To block the HbbTV pages from a specific channel, tune to the
channel, press r OPTIONS and select HbbTV on this channel
and select Off.
To block HbbTV on all channels, press h (Home), select Setup
and select TV settings > HbbTV and select Off.
32
Smart TV / Interactive TV
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Videos, photos and music
To pause or play, press OK.
To play the next file in the folder, press W.
To play to the previous file, press X.
To fast forward, press x.
Browse USB
You can view photos or play your music and videos from a USB
memory device.
To rewind, press w.
Insert a USB device into the USB connection on the left-hand
side of the TV while the TV is switched on. The TV detects the
device and opens a list showing its content. If the list does not
appear automatically, press h, select Browse USB and press
OK.
Options for music and videos
Press r OPTIONS to select the following:
• Stop
• Play once / Repeat
• Shuffle on / off
Music with photos
You can play music and show photos at the same time. Start the
photo slideshow after you started the music.
1 Select a folder with music files and press OK.
2 Select a folder with photo files and press OK.
To stop, press r OPTIONS and select Stop.
Screen off
If you only listen to music, you can mute the TV screen to save
energy.
To mute the screen, press the green key, select Screen off and
press OK. To switch the screen back on, press any key on the
remote control.
See the list of compatible playback formats in Help >
Specifications > Multimedia.
Browse PC
You can view photos or play your music and videos from a PC in
your home network.
The TV is DLNA certified and is compatible with other DLNA
certified devices.
What you need
To browse your PC files, you need to connect the TV to your
home network. Also, do not forget to set your media server
software to share the files with the TV.
To close Browse USB, press h and select another activity or
disconnect the USB device.
View photos
Browse PC
To view photos, select a photo in the list and press OK. If there
are more photos in the folder, the TV starts a slideshow with
these photos.
To stop, press r OPTIONS and select Stop.
To browse your PC files, press h, select Browse PC and press
OK.
To close Browse PC, press h and select another activity.
To pause or play the slideshow again, press OK.
To view the next photo, press W.
To view the previous photo, press X.
If the network is not yet installed when you select Browse PC,
the Network installation starts automatically. Follow the
instructions on screen.
Options for photos
Press r OPTIONS to select the following:
• Show info
To select, view and play your files, read Help > Smart TV >
Videos, photos and music > Browse USB.
• Stop
Find the list of compatible playback formats and compatible media
• Play once / Repeat
• Rotate
• Shuffle on / off
• Slideshow speed
• Slideshow transition
• Set as Scenea
server software in Help > Specifications > Multimedia.
Read more about connecting to a network in Help > Setup >
Network.
Scenea
Shuffle on
Plays the files randomly.
With Scenea, you can set a photo as a painting on your TV
screen. Select your favourite photo from your collection.
To open Scenea, press h, select Scenea and press OK. If you
did not yet select a photo of your own, a preset photo is shown.
To close the Scenea photo, press a key on the remote control.
Set as Scenea
Sets the current photo as a wallpaper photo for Scenea.
Play videos or music
To play videos or music, select the file in the list and press OK.
If there are more music or video files in the folder, the TV plays
the files one after the other. To stop, press r OPTIONS.
Smart TV / Videos, photos and music
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a photo for Scenea
1 Select a photo from a connected USB device or from a
connected PC. This photo must be in JPEG format.
2 With the photo highlighted in the Browse USB or Browse PC
list, press r OPTIONS, select Set as Scenea and press OK. By
agreeing to overwrite the current photo, the new photo is set.
Wi-Fi MediaConnect Help
To read the Wi-Fi MediaConnect Help, right-click the TV icon in
the taskbar of the PC and select Help.
Scenea lounge light
To switch off Ambilight when Scenea is on, press t ADJUST.
Or press Ambilight on the front of the TV.
Specifics
The playback of video can be affected by your PC performance
and your wireless network bandwidth.
Energy saving
To switch the TV to the energy saving mode, press t ADJUST,
select Smart picture and press OK. Select Energy saving.
You can project high definition (HD) or standard definition (SD)
video, depending on the processing power of your PC.
The content protection on most DVD or Blu-ray Disc movies
might restrict watching the movie on a TV when the disc is
playing on a PC.
Specifics
With Scenea switched on, the TV will automatically switch to
standby after 4 hours. You will be warned 1 minute before
switch off. This automatic switch to standby prevents unnecessary
energy use in case you forget that Scenea is on.
The TV shows PC media files with a small delay.
If the sleep timer is set, the TV will also switch to standby after
the set time has elapsed.
Scenea has no sound.
Wi-Fi Media Connect
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on to the TV screen wirelessly. You can project video,
music, presentations or other content playing on your laptop or
desktop PC.
Before you can project the PC screen on to TV, you must install
the Wi-Fi MediaConnect software on your PC.
Read more about installing the Wi-Fi MediaConnect software in
Help > Setup > Network > Wi-Fi MediaConnect.
Start projecting
To start projecting the PC screen on to the TV, click on the
small TV icon in the taskbar at the bottom right of the PC
screen. Your PC screen appears on your TV screen.
Stop projecting
To stop projecting, click on the TV icon again.
34
Smart TV / Videos, photos and music
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
3.4 Pause TV and recording
The USB Hard Drive is formatted exclusively for this TV, you
cannot use the stored recordings on another TV or PC. Do not
copy or change recording files on the USB Hard Drive with any
PC application. This will corrupt your recordings. When you
format another USB Hard Drive, the content on the former will
be lost.
Smart USB recording
With this TV you can pause a TV broadcast from a digital
channel. You can pause a TV broadcast to watch it later.
Simply connect a USB Hard Drive device to your TV and you
can pause the broadcast.
Pause TV
If your TV is connected to the Internet, you can also record or
set a programmed recording of a digital broadcast. In some
countries, recording is not supported.
While watching a TV broadcast from a digital channel, you can
pause the broadcast and continue watching later on. Answer a
phone call or take a break. Meanwhile, the broadcast is stored on
the USB Hard Drive. You can pause a broadcast for a maximum
time span of 90 minutes.
What you need
To pause a TV broadcast, press U (Pause). A progress bar
appears briefly on screen.
To call up the progress bar, press U (Pause) again.
To continue watching, press x (Play).
To switch to TV broadcast again, press S (Stop).
Smart USB recording and Pause TV only work with digital TV
channels (DVB broadcast or similar).
To pause
To pause a digital broadcast you need to connect a USB Hard
Drive. Use a USB 2.0 compatible Hard Drive device with a
minimum of 32GB Hard Drive space and a minimum writing
speed of 30MB/s. Connect the USB Hard Drive to one of the
two USB connectors on the side of the TV.
To record
First, check if the Programme guide supports recording. With the
Internet connected, press h and select Programme guide. If
there is a Recordings button on the Programme guide page, you
can record programmes.
To record programmes, you need a USB 2.0 compatible Hard
Drive with 250GB and a high-speed (broadband) Internet
connection to the TV.
Read more about connecting to the network in Help > Setup >
Network.
Once you switch to a digital channel, the USB Hard Drive starts
storing the broadcast. When you switch to another channel, the
new channel broadcast is stored and the broadcast of the former
channel is cleared. Also when you switch the TV to standby, the
stored broadcast is cleared.
When you start watching a programme of another device - a
connected Blu-ray Disc player or digital receiver - the USB Hard
Drive clears all broadcast storage.
Whilst recording a programme on the USB Hard Drive, you
cannot pause a TV broadcast.
Instant replay
Whilst watching a TV broadcast from a digital channel, you can
easily instant replay the broadcast.
To replay the last 10 seconds of a TV broadcast, press U
(Pause) and press w (Left).
You can press w repeatedly until you reach the start of the
broadcast storage or the maximum time span.
USB Hard Drive installation
Before you can pause or record a broadcast, you must format
the connected USB Hard Drive.
1 Connect the USB Hard Drive to one of the two USB ports on
the side of the TV. Do not connect another USB device to the
other USB port when formatting.
Progress bar
2 Switch on the device and the TV.
With the progress bar on screen, press T (Rewind) or press Q
(Forward) to select from where you want to start viewing the
stored broadcast. Press these keys repeatedly to change their
speed.
3 When the TV is tuned to a digital TV channel, press U (Pause)
to start formatting. Formatting will remove all data from the
connected USB Hard Drive. Follow the instructions on screen.
When the USB Hard Drive is formatted, leave the device
connected permanently.
Smart TV / Pause TV and recording
35
Download from Www.Somanuals.com. All Manuals Search And Download.
List of recordings
To view the list of recordings and scheduled recordings, select
Recordings on the Programme guide page and press OK. In this
list, you can select a recording to watch, remove recorded
programmes, check the free drive space or schedule a recording
not linked to a specific TV programme.
Expired recording
Broadcasters can limit the number of days a recording can be
viewed. A recording in the list can show the number of days
before it expires.
Failed recording
When a scheduled recording was prevented by the broadcaster
or when the download was interrupted, a recording is marked as
Failed.
Watch a recording
Specifics
In the list of recordings, select the arrow in front of the
recording and press OK. The playback of the recording starts.
You can use the x (Play), Q (Forward), T (Rewind), U
(Pause) or S (Stop) keys on the remote control.
The Audio Description audio (commentary) for the visually
impaired is not available for playback in Smart USB Recording.
Recording
Set a timed recording
If the TV is connected to the Internet and there is a Recordings
button on the Programme guide page, you can record a digital
TV broadcast on the USB Hard Drive.
To set a recording not linked to a programme, select Schedule
recording above the list of recordings and press OK. Set the
channel, date and time span. To confirm the recording, select
Schedule and press OK.
You can manage all recordings in the Programme guide on TV.
If the Recordings button is not available, check if the Programme
guide data is set to update from the network. Press h (Home)
and select Setup > TV settings > Preferences > Programme
guide > From network.
Remove a scheduled recording
To remove a scheduled recording, select the red circle in front
of the recording and press OK.
Delete a recording
Record now
To remove a recording, select the recording in the list and press
r OPTIONS and select Delete recording.
To record the programme you are watching, press R (Record).
While the recording has already started, you can adjust the end
time of the recording in the pop-up window of the Programme
guide. Press Schedule to confirm the end time.
Programme information
To view more information on a programme, select the
programme in any programme guide list and press OK.
Depending on the status of this programme you can start
watching, schedule its recording, playback the recording or delete
the recording from this page.
To stop recording immediately, press S.
Schedule a recording
You can schedule a recording of an upcoming programme for
today or a few days from today (maximum of 8 days away).
Specifics
• While recording a programme, you can watch a previously
recorded programme.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV broadcast.
1 To schedule a recording, press h (Home) and select
Programme guide. On the Programme guide page, select the
channel and programme you wish to record.
• The Audio Description audio (commentary) for the visually
impaired is not available for playback in Smart USB Recording.
You can enter the channel number to jump to the channel in the
list. Press x (Right) or w (Left) to scroll the programmes of a
channel.
To change the date of the list, select the date at the top of the
page and press OK. Select the day you want and press OK
again.
2 With the programme highlighted, press r OPTIONS and
select Record. The TV adds some time buffer at the end of the
program. You can add some extra buffer if needed.
3 Select Schedule and press OK. The programme is scheduled
for recording. A warning will show automatically when
overlapping recordings are scheduled.
If you plan to record a programme in your absence, remember
to leave the TV on standby and the USB Hard Drive switched
on.
36
Smart TV / Pause TV and recording
Download from Www.Somanuals.com. All Manuals Search And Download.
What you need
With this TV, use the active 3D glasses - Philips PTA516 (sold
separately).
3.5 Games
For two-player split screen gaming, the game console must be
connected with HDMI.
Play a game
Add a game console
Start a two-player game
In the Home menu, start Add your devices to add the console
to the Home menu for easy selection later on. When adding a
game console to the Home menu, select Game when the TV
asks for the device type. If your game console is an EasyLink
HDMI-CEC device it might add itself to the Home menu.
1 Select the game console in the Home menu and press OK.
2 On the game console, start the game and select the multi or
two-player mode. Select the mode for split screen viewing.
3 On the TV, press t ADJUST and select Two-player game.
4 Select the format in which the split screen game is shown on
screen, Side by side or Top / bottom and press OK. The TV
shows the 2 screens as full screens.
To watch the 2 different screens, put on the 3D glasses.
To switch the glasses to watch the Player 1 screen or Player 2
screen, press the Player 1/2 selection key on the glasses.
In and out of split screen view
In two-player split screen view, you can switch back and forth
from split screen to combined view, to be able to read the game
menu or game scores.
To switch views back and forth, press OK on the remote
control of the TV.
Smart setting - Game
The Smart picture setting Game sets the TV to the ideal Game
settings without picture lag.
If your game console is added as Game in the Home menu, the
TV switches to the Game setting automatically.
Stop Two-player game
To stop the two-player split screen view, press h (Home) and
select another activity.
Specifics
If your game console has added itself in the Home menu as a
Blu-ray Disc player or DVD player, you need to switch the
Smart picture setting to Game before you start playing.
To make Two-player gaming available in the menu, select 3D in
the same menu, select 2D in the list and press OK.
To switch the Smart picture setting to Game, press t ADJUST
and select Smart picture > Game and press OK. The TV is ready
for gaming. Do not forget to switch back to your normal Smart
picture setting when you stop gaming.
Read more about how to connect a game console in Help >
Connections > Connect more devices > Game or HD Game.
Two-player games
Some games offer multi-player and split screen gaming. On this
TV, you can set the split screen as two full screen views. Two
players watch the same TV but see two different screens to play
the game. The TV uses 3D technology to do this. To watch each
screen, you need a pair of 3D glasses for each player.
Smart TV / Games
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Text
3.6 Text
You can select a word and scan Text for all occurrences of this
word.
Text pages
Open a Text page and press OK. Select a word or number with
the navigation keys. Now press OK again to jump immediately to
the next occurrence of this word or number. Press OK again to
jump to the subsequent occurrence.
Open Text
To access Text while you are watching TV channels, press
TEXT.
To close Text, press TEXT again.
To stop the search, press u until nothing is selected.
Text from a connected device
Some connected devices that receive TV channels can also offer
Text.
To open Text from a connected device, press h, select the
device and press OK. While watching a channel on the device,
press r OPTIONS, select Show device keys and select the
B key and press OK. Press È (Back) to hide the device keys.
To close Text, press È (Back) again.
Digital Text (UK only)
Some digital TV broadcasters offer dedicated Digital Text or
interactive TV on their digital TV channels. This includes normal
Text using the number, colour and navigation keys to select and
navigate.
Select a Text page
To select a page …
• Enter the page number with the number keys.
To close Digital Text, press È (Back).
• Press W or X
Text options
• Press u or v.
• Press a colour key to select a colour-coded subject at the
bottom of the screen.
In Text, press r OPTIONS to select the following:
• Freeze page
• Dual screen
• T.O.P. overview
• Enlarge
• Reveal
• Cycle subpages
• Language
Freeze page
To stop the automatic rotation of subpages, press r OPTIONS
and select Freeze page.
Dual screen / Full screen
To show the TV channel and Text alongside each other, press
r OPTIONS and select Dual screen. Select Full screen to
switch back to full screen view.
T.O.P. overview
To open T.O.P. Text, press r OPTIONS and select T.O.P.
overview.
Enlarge
To enlarge the Text page for more comfortable reading, press
r OPTIONS and select Enlarge. To scroll down the page,
press v or u.
Reveal
To unhide hidden information on a page, press r OPTIONS
Text sub-pages
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
and select Reveal.
Cycle subpages
To cycle subpages when these are available, press r OPTIONS
and select Cycle subpages.
To select a subpage, press w or x.
T.O.P. Text pages
Language
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text, press r OPTIONS
and select T.O.P. overview.
To switch the group of characters that Text uses to display
correctly, press r OPTIONS and select Language.
Text setup
38
Smart TV / Text
Download from Www.Somanuals.com. All Manuals Search And Download.
Text language
Some digital TV broadcasters have several Text languages
available.
To set your primary and secondary Text language, press h >
Set up > Channel settings and select Primary or Secondary Text
and select your preferred Text languages.
Text 2.5
If available, Text 2.5 offers more colours and better graphics. Text
2.5 is activated as a standard factory setting.
To switch it off, select h > Setup > TV settings > Preferences
> Text 2.5.
Smart TV / Text
39
Download from Www.Somanuals.com. All Manuals Search And Download.
• Screen edges
Slightly enlarge the picture to hide distorted edges.
• Picture shift
Move the picture up / down or left / right with the cursor keys.
4 Setup
4.1 Picture and sound
Sound
Picture
In the Sound menu, you can adjust all sound settings individually.
In the Picture menu, you can adjust all picture settings
individually.
To open Sound settings, press h > Setup > TV settings >
Sound.
To open the Picture settings, press h > Setup > TV settings >
• Bass
Picture.
Sets the level of low tones in the sound.
• Treble
Sets the level of high tones in the sound.
• Surround
• Contrast
Sets the contrast level of the picture.
• Brightness
Sets the brightness level of the picture.
• Colour
Sets the level of colour saturation.
Sets the surround sound effect from internal speakers.
• Headphones volume
Sets the volume for the headphone connection of the TV.
• Auto volume levelling
Reduces sudden volume differences like at the beginning of
adverts or when switching from one channel to another.
• Hue
If NTSC is broadcast, hue compensates the colour variations.
• Sharpness
Sets the level of sharpness of fine detail.
• Noise reduction
Filters out and reduces the image noise in the picture.
• Balance
Sets the balance of the left and right speakers to best fit your
listening position.
• Tint
Eco settings
Sets the colours to Normal, Warm (reddish) or Cool (bluish).
Select Custom to set up your own personal settings in the
Custom menu.
Eco settings bundle the TV settings that help the environment.
• Custom tint
While you are watching TV channels, press the Green key to
open Eco settings. Active settings are marked with a ê.
Press again to close.
Use the slider bar to set the colour temperature of the picture.
• Perfect Pixel HD
Controls the advanced settings of the Perfect Pixel HD Engine.
— Perfect Natural Motion removes motion judder and
reproduces smooth movement, especially in movies.
Energy saving
This Smart picture setting sets the picture, together with
Ambilight, in the most ideal energy conscious setting. To switch
on, select Energy saving in Eco settings and press OK.
To switch off Energy saving, select another Smart picture setting.
— Clear LCD gives a superior motion sharpness, better black
level, high contrast with a flicker-free, quiet image and a larger
viewing angle.
— Super resolution enables superior sharpness, especially on
lines and contours in the picture.
Screen off
If you only listen to music, you can switch off the TV screen to
save energy. Select Screen off and press OK. To switch the
screen back on, press any key on the remote control.
— Perfect contrast sets the level at which the TV automatically
enhances the details in the dark, middle and light areas of the
picture.
— Dynamic backlight sets the level at which power consumption
can be reduced by dimming the brightness intensity of the screen.
Choose for the best power consumption or for the picture with
the best brightness intensity.
Light sensor
The built-in light sensor automatically adjusts the picture, together
with Ambilight, to the lighting conditions of the room. To switch
on, select Light sensor and press OK. To switch off, press OK
again.
Auto switch off
If no keys on the TV remote control were pressed during a 4-
hour period, the TV switches off automatically to save energy.
You can switch off this Auto switch off.
— MPEG artefact reduction smooths the digital transitions in the
picture.
— Colour enhancement makes the colours more vivid and
improves the resolution of details in bright colours.
If you use the TV as a monitor or use a digital receiver to watch
TV (a set top box - STB) and you do not use the remote
control of the TV, switch off the automatic switch off.
— Gamma is a non-linear setting for picture luminance and
contrast. Use the slider bar to set a higher or lower gamma
value.
• PC mode
Sets the TV to the ideal pre-defined computer setting if a
computer has been connected.
Smart settings
If you select a Smart setting in the ADJUST menu, you can again
change the settings of the selected Smart setting with the Picture
and sound settings in Setup. The Smart setting remembers your
changes.
• Light sensor
Adjusts the picture and Ambilight settings automatically to the
lighting conditions of the room.
• Picture format
Read Help > Basics > Watch TV > Picture format.
40
Setup / Picture and sound
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset a Smart setting
To reset a Smart setting to its original values, select the Smart
setting you want to reset in the ADJUST menu. Then press h
> Setup > TV settings > Picture, select Reset, press OK and
confirm.
Read more about using Smart picture and sound settings in Help
> Basics > Watch TV > Smart picture and sound settings.
ISF Calibration
Get the most out of your HD TV display with ISF Calibration.
An ISF calibration expert comes to your home and sets the TV
to the most optimal picture setting. Additionally the expert can
set an ISF Calibration for Ambilight.
Ask your dealer for an ISF Calibration of your TV.
The ISF Calibration expert stores and locks the ISF settings as 2
Smart picture settings. Once the ISF Calibration is done, press t
ADJUST, select Smart picture and press OK. Select ISF Day to
watch TV during bright light conditions or select ISF Night for
dark light conditions.
An ISF Calibration can be done on every activity in the Home
menu, like Watch TV or a connected Blu-ray Disc player.
Calibration benefits are . . .
• better picture clarity and sharpness
• better detail in bright and dark parts
• deeper and darker blacks
• better colour purity and quality
• reduced energy consumption
Expert picture settings
When ISF Day or ISF Night is selected while an ISF Calibration is
not yet performed on the TV, some expert picture settings are
available. Press h (Home) > Setup > TV settings > Picture >
ISF expert settings and press OK.
Reset Smart picture settings
To reset a Smart setting to its original values, select the Smart
setting you want to reset in the ADJUST menu. Then press h
(Home) > Setup > TV settings > Picture, select Reset, press
OK and confirm.
Setup / Picture and sound
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambilight colour
4.2 Ambilight
To set the Ambilight colour, select Ambilight colour and press
OK. Select Dynamic, if Ambilight should respond to onscreen
images or select one of the fixed colours. Select Custom if you
want to set a specific fixed colour.
Placement
For the best Ambilight effect :
• Dim the lighting conditions in the room and position the TV
up to 25 cm away from the wall.
• Adjust Ambilight according to the colour of your wall at home
in the Wall colour setting.
• To prevent poor infrared remote control reception, position
your devices out of sight of Ambilight.
Custom colour
To set an Ambilight colour of your own, select Custom in the
Ambilight Colour menu. With Custom selected, you can open
the Custom colour menu. Select Palette to choose your own
colour. Ambilight Custom colour is a fixed (non-dynamic) colour
setting.
Separation
To set the difference in colour level between the lights on each
side of the TV, select Separation. Separation Off gives a dynamic
but uniform Ambilight colour.
TV switch off
To set Ambilight to fade out and switch off a few seconds after
you have switched off the TV, select TV switch off. Allow
Ambilight to fade out and switch off completely before you
switch the TV back on again.
Lounge light mood
Read more about Lounge light mood in Help > Setup >
Ambilight > Lounge light mood.
Scenea lounge light
To always switch off Ambilight when Scenea is switched on,
select Scenea lounge light and select Off.
Adjust
Wall colour
The colour of the wall behind your TV can influence the colour
effect of Ambilight. To correct this influence, select Wall colour
and select a colour that matches the wall colour. Ambilight will
correct its colours to mix best with the colour of the wall behind
the TV.
To open the Adjust menu, press t ADJUST.
To close, press t again.
Switch Ambilight on or off
In the Adjust menu, select Ambilight and press OK. Switch
Ambilight On or Off. You can also press Ambilight on the TV.
Lounge light
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press
Ambilight on the TV.
Ambilight dynamic
In the Adjust menu, select Ambilight dynamic and press OK.
Adjust the speed at which Ambilight responds to onscreen
images.
Read more about other Ambilight settings in Help > Setup >
Ambilight > Settings.
To change the Lounge light colour scheme, press Ambilight on
the TV again.
Settings
More Ambilight settings are available in the Ambilight settings
menu in Setup. To change these settings, press h and select
Setup > TV settings > Ambilight.
To switch off Lounge light, press and hold Ambilight on the TV
for 3 seconds.
Ambilight brightness
To set the Ambilight brightness, select Ambilight brightness and
press OK. Adjust the light output of Ambilight.
42
Setup / Ambilight
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also set up the colour scheme in the Setup menu.
With the TV switched on, press h and select Setup. Select TV
settings > Ambilight > Lounge light mood. Select the colour
scheme with which Lounge light will start up.
Setup / Ambilight
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Channels
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as
Reorder and rename
Q . . . LA
• Both TVs have compatible software versions. When you
upload, an on-screen message will warn you if software versions
are not compatible.
You can reorder and rename channels in the Channel list.
To reorder or rename a channel, read Help > Basics > Watch
TV > Channel list.
Copy a Channel list
1 Switch on the TV which has its channels installed. Plug in a
USB memory device.
Update channels
2 Press h > Setup > TV settings > Preferences > Channel list
copy > Copy to USB and press OK. To copy the Channel list
from this TV, you might be asked to enter the TV PIN code you
entered during the installation.
The TV puts all installed channels in the Channel list. If you
receive digital channels, you can set the TV to automatically
update the list with new channels. You can also start an update
of the Channel list yourself.
Automatic channel update
3 When copying is done, unplug the USB memory device.
Once a day, at 6 AM, the TV updates the channels and stores
new channels. Empty channels are removed. For new or removed
channels, a message is shown at TV start up. The TV must be in
standby to automatically update channels.
Now you can upload the copied Channel list onto another Philips
TV.
Upload a Channel list
To switch off the message at start up, press h > Setup >
Channel settings and press OK. Select Channel installation >
Channel update message and select Off.
To a TV that's not yet installed
1 Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
To switch off the automatic channel update, press h > Setup >
Channel settings and press OK. Select Channel installation >
Automatic channel update and select Off.
Start an update
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
To start an update yourself, press h > Setup > Search for
channels and press OK. Select Update channels and press OK.
Press Start. The update can take a few minutes. Follow the
instructions on screen.
Reinstall channels
To an already installed TV
1 Verify the country setting of the TV. (To verify this setting,
press h > Setup > Search for channels > Reinstall channels
and press OK. Press È (Back) and later Cancel to leave the
Search for channels.)
Reinstall channels
To reinstall only the channels, press h > Setup > Search for
channels > Reinstall channels and press OK. Select DVB-T or
DVB-C. The channel search can take a few minutes. Follow the
instructions on screen.
If the country is correct continue with step 2 hereunder.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press h > Setup > TV settings >
Reinstall TV and press OK. Select the correct country and skip
the Search for channels. Finish the installation. When done, return
to step 2.
Full installation
To redo a full TV installation, press h > Setup > TV settings >
Reinstall TV and press OK. The installation can take a few
minutes. Follow the instructions on screen.
You can reorder and rename channels in the Channel list.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
Channel list copy
Channel list copy is intended for dealers and expert users.
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
With Channel list copy, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
and you can offer a predefined channel list setup. The small file
you copy fits every USB memory device.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
Conditions
DVB-T or DVB-C
• Both TVs are from the same year range.
• Both TVs have the same product type suffix for DVB (H, K, M,
T or D/00) in their type number and have the TV installed for
the same country.
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you will have selected one or the other during the
channel installation.
44
Setup / Channels
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to change the DVB setting to start a new channel
installation, press h > Setup > Channel settings and press OK.
Select Channel installation > Antenna or Cable DVB and press
OK. Select the DVB setting you want.
4 Store
You can store the channel on the current channel number or as
a new channel number. Select Store current channel or Store as
new channel.
You can redo these steps until you found all available analogue
TV channels.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic. If your
DVB-C provider gave you specific DVB-C values, like a symbol
rate or a frequency, enter these values when the TV asks for
them during installation.
Clock settings
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
DVB-T + DVB-C
You can set up your TV for DVB-T and DVB-C. Install one
system followed by the other. When both installations are
complete, the Channel list will show both DVB-T and DVB-C
channels.
To correct the TV clock, press h > Setup > TV settings >
Preferences > Clock and select Country dependent. Select
Daylight saving and select the appropriate setting.
To set the time and date manually, select Manual. Then select
Time or Date.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you use an antenna, you can reposition the antenna to try and
improve the reception.
To check the reception quality of a digital channel, switch to the
channel and press h > Setup > Channel settings and press
OK. Select Channel installation > Digital : reception test and
press OK.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK.
To enter a specific digital frequency yourself, select the frequency,
position the arrows on a number with x and w and change the
number with u and v. To check the frequency, select Search
and press OK.
If you use DVB-C to receive channels, the options Symbol rate
mode and Symbol rate are available. For Symbol rate mode,
select Automatic, unless your cable provider gave you a specific
symbol rate value. To enter the symbol rate value, use the
number keys.
Manual installation — Analogue
Analogue TV channels can be manually tuned in channel by
channel.
To install analogue channels manually, press h > Setup >
Channel settings and press OK. Select Channel installation >
Analogue : manual installation and press OK.
1 System
To set up the TV system, select System and press OK. Select
your country or part of the world where you are now.
2 Find channel
To find a channel, select Find channel and press OK. Select
Search and press OK. You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select Done and press OK.
3 Fine tune
To fine tune a channel, select Fine tune and press OK. You can
fine tune the channel with u or v. If you want to store the
channel found, select Done and press OK.
Setup / Channels
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Install channels
4.4 Satellite channels
To install all channels for the satellites you found, press Install.
The installation can take several minutes per satellite.
When the installation is finished, you can find all channels in the
satellite Channel list.
Introduction
As well as the DVB-T and DVB-C reception, this TV has a built-
in satellite DVB-S receiver. With a satellite dish antenna
connected, you can receive digital satellite channels. You do not
need an external satellite receiver.
More settings
For most satellites, you do not need to change the LNB settings
but, if you are searching for a specific satellite on C-band for
instance, you need to set the LNB you use for this satellite to
Single. Or, if you are an expert user, you might need a Custom
setting for the LNBs you use.
Reset
You might have lost track of the settings you set up.
To reset the satellite installation settings to factory settings, select
Reset in Settings and press OK.
Signal reception test
The automatic channel install might have missed a specific channel
or channels from a transponder. You can add a transponder with
Signal reception test. Read Help > Setup > Satellite channels >
Signal reception test.
Dish antenna connection
Read more about the antenna connection for satellite in Help >
Connections > First connections > Satellite antenna.
LNB
Find the list of preset satellites on this TV in Help >
Specifications > Power and reception.
An LNB (Low Noise Block-downconverter) captures the signals
from a satellite and is mounted at the end of the pole on the
dish antenna. The TV can receive signals from 4 different LNBs.
Add satellites
If satellite channels are already installed, you can add an extra
satellite to the installation. You can install channels from 4
different satellites - 4 LNBs.
Installation
With a properly set-up and connected satellite dish antenna, you
can install satellite channels on the TV.
You can install channels from 4 different satellites (4 LNBs).
1 Connection type
Check the Connection type setting before you add a satellite.
The setting One LNB receives only one LNB, the setting DiSEqC
Mini receives only 2 LNBs and the setting DiSEqC 1.0 can
receive 3 or 4 LNBs.
1 Install
To search for satellites and install satellite channels, press h >
Setup > Search for satellite and press OK. If you have already
installed satellites, select Reinstall channels and press OK.
To check the Connection type first, press h > Setup > Search
for satellite and press OK. Select Reinstall channels and select
Settings and press OK. Select Connection type and select the
setting you need for the number of satellites you want to install.
Select Done to close the settings. Press È to close Reinstall
channels.
2 Connection type
Before you start searching for satellites, you must set the
connection type. The connection type will determine the number
of LNBs you can install (the number of different satellites). For
ease of installation, select the correct type for the number of
satellites you want to install.
2 Add a satellite
To add a satellite, press h > Setup > Search for satellite and
press OK. Select Add satellite and press OK. The TV searches
for a satellite on the first free LNB. This can take several minutes.
To set up the connection type, select Settings and press OK.
Select Connection type and select One LNB if you have only
one LNB, select DiSEqC Mini for 2 LNBs or select DiSEqC 1.0
to install 3 or 4 LNBs. Select Done to close the settings.
If no satellites are found, check the antenna connections and the
position of the dish antenna. Select Restart or Next LNB.
If there are no free LNBs, you can remove a satellite first. Read
Remove satellites on the following page.
3 Search for satellites
To start the search, select Start and press OK. The TV searches
for all available satellites. This can take several minutes. If no
satellites are found, check the antenna connections and the
position of the dish antenna.
3 Install channels
If you are satisfied with the added satellite, you can install the
channels.
To install all channels, press Install. The installation can take
several minutes. When installation is complete, you can find the
added channels in the satellite Channel list.
The signal quality shown is not always representative of the signal
quality of all channels on that satellite.
To repeat the search for satellites, select Restart and press OK.
If you are satisfied with the satellites found, you can install all
their channels.
You can remove a satellite from your satellite installation.
46
Setup / Satellite channels
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove a satellite, press h > Setup > Search for satellite.
Select Remove satellite and press OK. Select the satellite you
want to remove and press OK. To confirm, select Yes and press
OK. The satellite and its channels are removed from the
installation.
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
Update channels
To an already installed TV
1 Verify the country setting of the TV. (To verify this setting,
press h > Setup > Search for channels > Reinstall channels
and press OK. Press È (Back) and later Cancel to leave the
Search for channels.)
If satellite channels are already installed, you can update the
channel list with possible new channels from all installed satellites.
To update the satellite channels, press h > Setup > Search for
satellite. Select Update channels and press OK. The TV scans
the satellites for new channels and adds them to the list. Empty
channels are removed from the list. The update can take several
minutes per satellite. When the update has finished, the Channel
list for satellites is updated.
If the country is correct continue with step 2 hereunder.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press h > Setup > TV settings >
Reinstall TV and press OK. Select the correct country and skip
the Search for channels. Finish the installation. When done, return
to step 2.
Channel list copy
Channel list copy is intended for dealers and expert users.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
Channel list copy will copy both terrestrial and satellite channels.
With Channel list copy, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
and you can offer a predefined channel list setup. The small file
you copy fits every USB memory device.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same product type suffix for DVB (H, K, M,
T or D/00) in their type number and have the TV installed for
the same country.
Signal reception test
With Signal reception test for satellites, you can check the signal
strength of a satellite or you can add a new satellite channel.
• Both TVs have an identical satellite installation setting.
To start Signal reception test, press h > Setup > Search for
satellite. Select Signal reception test and press OK.
1 Select the LNB.
2 If you know the frequency of the transponder (which can hold
several channels), select Frequency and enter it.
3 Select Search and press OK.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as
Q . . . LA
• Both TVs have compatible software versions. When you
upload, an on-screen message will warn you if software versions
are not compatible.
4 If the TV finds a frequency and there is a store button shown,
a new transponder has been found.
5 Press Store to add the new transponder with its channel or
channels to the Channel list.
Copy a Channel list
1 Switch on the TV which has its channels installed. Plug in a
USB memory device.
To add another transponder, select Exit and repeat the steps.
2 Press h > Setup > TV settings > Preferences > Channel list
copy > Copy to USB and press OK. To copy the Channel list
from this TV, you might be asked to enter the TV PIN code you
entered during the installation.
Troubleshooting
The TV cannot install the satellite I want
• Check the orientation of the dish antenna.
• Check the setting for the LNB that you use for this satellite.
• Check the connection type in the satellite installation settings.
3 When copying is done, unplug the USB memory device.
Now you can upload the copied Channel list onto another Philips
TV.
• Reset all satellite settings if you lost track of the settings you
changed. Read Help > Setup > Satellite channels > Installation.
Upload a Channel list
The reception of a satellite channel is poor
• Check the orientation of the dish antenna.
To a TV that's not yet installed
1 Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
Sometimes the reception is poor
• Check if the dish antenna is solidly mounted. Strong winds can
move the dish.
• Snow and rain can degrade reception.
Read more about troubleshooting in Help > Troubleshooting.
Setup / Satellite channels
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Find your PC files
4.5 Network
To select your PC files on screen, you need recent media server
software on your computer, like Windows Media Player 11 or
similar. To find your files on the TV, some media server software
must be set up to share the PC files with the TV.
Benefits
Browse PC
Find the list of supported media server software in Help >
Specifications > Multimedia.
If you connect the TV to a home network, you can play photos,
music and videos from your computer or storage device. Once
the network is installed on the TV, you can find and play the files
from your PC on the TV screen.
Wireless installation
Net TV
Switch on your router before you start the network installation.
If you connect the TV to a home network with an Internet
connection, you can link up the TV to Net TV. Net TV offers
Internet services and websites tailored to your TV. Play music and
videos, consult infotainment, rent movies and much more. Once
the network is installed, you can enjoy the best of the Internet
for your TV.
To start the wireless network installation, press h, select Setup
> Connect to network and press OK. Follow the instructions on
screen.
WPS - Wi-Fi Protected Setup
If your router has WPS (Wi-Fi Protected Setup), go to the
router and press the WPS button. Return to the TV within 2
minutes, select WPS and press OK. The TV connects to your
network. This takes about 2 minutes. Finish the installation.
Interactive TV
With the TV connected to the Internet, you can enjoy the full
benefits of Interactive TV. Systems such as HbbTV, MHP, etc use
the Internet to communicate with the TV.
Wi-Fi MediaConnect
Most new wireless routers have the WPS system and carry the
WPS logo. The WPS system uses WPA security encryption and
cannot be combined with devices on your network that use the
WEP security encryption. If you still need this WEP device in
your network, install with Scan > Standard.
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on the TV screen wirelessly. You start Wi-Fi
MediaConnect from your PC.
What you need
Scan for routers
If you have several routers in your network, you can select the
network you need. To select a specific network router, press
Scan on the first page of the installation. The routers with WPS
and with the strongest signal are shown first in the list.
To connect the TV to a home network and the Internet, you
need a router in your home network. The router must be set to
DHCP server on. Use a router with a high-speed (broadband)
connection to the Internet. You can connect the TV wirelessly or
wired.
Select the router you need and press WPS if the router has
WPS. Or press Pin code if you can enter the PIN code in your
router software to connect. Or press Standard to enter the
encryption key manually.
PIN code
To make the secured connection with a PIN code, select PIN
code and press OK. Write down the 8-digit PIN code shown
and enter it in the router software on your PC. See the router
manual where to enter the PIN code.
Standard
To enter the encryption key (the security key) manually, select
Standard and press OK. If you have WPA security on your
router, enter the passphrase with the remote control. To open
the on-screen keyboard, select the text entry field and press OK.
If you have WEP security encryption, the TV asks for the WEP
encryption key in hexadecimal numbers. Find this hexadecimal key
in the router software on your PC. Write down the first key of
the WEP keys list and enter it on TV with the remote control. If
the security key is accepted, the TV is connected with the
wireless router.
If asked, agree to the End User License Agreement.
If you use a wired connection to the router you need a network
(Ethernet) cable.
Wi-Fi Media Connect
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on the TV screen wirelessly. Look up the code on the
product introduction booklet to download this PC software for
free. Wi-Fi MediaConnect is only available for PC.
The TV uses a DLNA-certified protocol. You can use a computer
with Microsoft Windows XP, Vista or Windows 7, Intel Mac
OSX or Linux as the operating system.
48
Setup / Network
Download from Www.Somanuals.com. All Manuals Search And Download.
What you need
You can view the network type, IP and MAC address, the signal
strength, speed and encryption method etc. You can set DHCP
and Auto IP, the IP configuration settings, DMR and the TV
network name.
To use Wi-Fi MediaConnect, you need to connect the TV to
your home network. You need a wireless router.
Read more about connecting to a network in Help > Setup >
Network.
Install Wi-Fi MediaConnect
2 On the website, check the necessary PC system requirements.
3 Enter the code printed on the product introduction booklet.
4 Click the 'Download now' button to download the free Wi-Fi
MediaConnect software.
5 Once downloaded, start the file 'Wi-Fi
MediaConnect_setup.exe'. Follow the instructions on screen.
TV network name
If you have more than one TV in your home network, you can
rename this TV. To rename this TV in the network, press h >
Setup > Network settings and select TV network name. To
enter the name, press OK to open the on-screen keyboard or
use the remote control keypad.
To use Wi-Fi MediaConnect on your PC read Help > Smart TV
> Videos, photos and music > Wi-Fi MediaConnect.
PC requirements
Windows XP, Vista, Windows 7 (PC only)
Minimum PC requirements
• Intel® Pentium Core™ 2 Duo 1.8GHz
• 512MB RAM
• 200MB free hard disk space
• Wi-Fi 802.11g
• Broadband Internet connection
Recommended PC requirements
• Intel® Pentium Core™ 2 Duo 2.1GHz
• 1GB RAM
• 200MB free hard disk space
• Wi-Fi 802.11n for router and PC
• Broadband Internet connection
Wired installation
Connect the router to the TV and switch on your router before
you start the network installation.
To start the network installation, press h, select Setup >
Connect to network and press OK. Follow the instructions on
screen.
The TV constantly searches for a network connection. The router
must be set to DHCP server on.
If asked for, agree to the End User License Agreement.
Read more about how to connect in Help > Connections >
Network > Wired.
Network settings
To open the Network settings, press h > Setup > Network
settings and press OK.
Setup / Network
49
Download from Www.Somanuals.com. All Manuals Search And Download.
With a Home Theatre System (HTS) connected to the TV, the
picture on TV and the sound from the HTS should be
synchronised. A mismatch can be visible in scenes with people
talking. When they finish sentences before their lips stop moving.
4.6 Devices
EasyLink HDMI-CEC
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video
sync is automatically synchronised and always correct.
With EasyLink HDMI-CEC your TV and the connected devices
can work together. You can use the TV remote control to
operate EasyLink devices. The device needs to be connected with
an HDMI cable. Devices with EasyLink appear automatically in the
Home menu.
Audio sync delay
Other Home Theatre Systems might need to adjust the audio
sync delay to synchronise the audio to video. On the HTS,
increase the delay value until there is a match between picture
and sound. A delay value of 180ms may be required. Read the
user manual of the HTS.
Setup
The TV comes with EasyLink switched on.
Make sure that all HDMI-CEC settings are properly set up on
the connected EasyLink devices. EasyLink might not work with
devices from other brands.
With a delay value set up on the HTS, you need to switch off
Audio Out delay on the TV if the HTS sets an identical delay for
all its incoming audio. To switch off Audio Out delay, press h
and select Setup > TV settings > Preferences > Audio Out
delay. Select Off and press OK.
Switch off EasyLink RC
If you don't want to operate devices with the TV remote
control, you can switch off EasyLink remote control separately.
Press Home h > Setup > TV settings and select EasyLink >
EasyLink Remote Control and select Off.
If you cannot set up a delay on the HTS or its maximum setting
is insufficient, you can switch off the Perfect Natural Motion
picture processing of the TV. To switch off Perfect Natural
Motion, press h and select TV settings > Picture > Perfect
Natural Motion. Select Off and press OK.
Switch off EasyLink
To switch off EasyLink completely, press Home h > Setup >
TV settings and select EasyLink > EasyLink On/Off and select
Off.
HDMI-CEC on other brands
The HDMI-CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a recent Philips player, the
TV can move the subtitles upwards. Subtitles will then be visible
whatever Picture format you select. The TV comes with Auto
subtitle shift switched on.
Read more about using EasyLink in Help > Basics > Remote
control > Operate devices.
To switch off Auto subtitle shift, press h > Setup > TV
settings > EasyLink > Auto subtitle shift. Select Off.
Add a new device
Devices connected with EasyLink HDMI-CEC automatically show
their activity in the Home menu. A single device can add several
activities. The device must be connected with an HDMI cable.
If your connected device does not appear in the Home menu,
on the device EasyLink may be switched off.
Pixel Plus link
Some other devices, DVD or Blu-ray Disc players, might have
their own picture quality processing. To avoid bad picture quality
caused by interference with the TV processing, the picture
processing of these devices should be disabled. The TV comes
with Pixel Plus link switched on and disables the picture quality
processing of recent Philips devices connected to the TV.
If your connected device does not have EasyLink or is not
connected with an HDMI cable, you need to manually add your
device with Add your devices in the Home menu.
To switch off Pixel Plus link, press h > Setup > TV settings >
EasyLink > Pixel Plus link. Select Off.
Add your devices
In the Home menu, select Add your devices and press OK.
Follow the instructions on screen.
The TV asks you to select the device and the connection to
which the device is connected.
The device or its activities are now added to the Home menu.
Rename a device
To rename a device in the Home menu, select the device and
press r OPTIONS and select Rename. Use the keypad on the
remote control as you do for SMS/text messaging to enter the
new name or press OK to open the on-screen keyboard.
Delete a device
To delete a device or activity from the Home menu, select the
item and press r OPTIONS and then select Remove this
device.
If the device or activity, keeps appearing in the Home menu after
you deleted it, switch off the EasyLink setting on the device to
prevent the icon from being automatically added again.
Audio to Video sync
50
Setup / Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on
4.7 Universal access
To switch on Key beep, press r OPTIONS, select Universal
access and press OK. Select Key beep and select On.
Switch on
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
With Universal access switched on, the TV is set for use for
hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the installation,
you can still switch it on in Setup.
To switch on Universal access, press h > Setup > TV settings
> Preferences > Universal access. Select On and press OK.
With Universal access switched on in Setup, the Universal access
option is added in the Options menu. With Universal menu in
the Options menu, you can set specific settings for hearing and
visually impaired people.
Hearing impaired
Some digital TV channels broadcast special audio and subtitles
adapted for hearing impaired people. With Hearing impaired
switched on, the TV automatically switches to the adapted audio
and subtitles, if available.
Switch on
To switch on Hearing impaired, press r OPTIONS, select
Universal access and press OK. Select Hearing impaired, select
On and press OK.
To check whether a hearing impaired audio language is available,
press r OPTIONS, select Audio language and look for an
audio language marked with a î.
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
Visually impaired
Some digital TV channels broadcast special audio called Audio
Description for visually impaired people. The audio consists of a
narrator describing what is happening in the programme during
the pauses in the normal audio.
Switch on
To switch this visually impaired audio, press r OPTIONS,
select Universal access and press OK. Select Visually impaired
and select On or, if available, select the speakers the adapted
audio should be played from. If available, the TV will play the
visually impaired audio.
Volume - Visually impaired
If available, you can set the volume of the extra commentary.
To check whether a visually impaired audio language is available,
press r OPTIONS, select Audio language and look for an
audio language marked with a Ï.
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
Key beep
Key beep gives an audio feedback each time you press a key on
the remote control. The volume of the beep is fixed.
Setup / Universal access
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not . . .
• press O twice
• use the O switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
4.8 Software
Current version
To view the current TV software version, press h > Setup >
Software settings and press OK. Select Current software info
and read Version:
The TV software has been updated. You can use the TV again.
To prevent an accidental update of the TV software, delete the
autorun.upg file from the USB memory device.
Update from Internet
If the TV is connected to the Internet, you may receive a
message from TP Vision to update the TV software. You need a
high-speed (broadband) Internet connection.
If you receive this message, we recommend you carry out the
update. Select Update. Follow the instructions on screen.
You can also look for new updates yourself. To look for an
update, press h > Setup > Update software and press OK.
Follow the instructions on screen.
When the update is complete, the TV switches off and back on
again automatically. Wait for the TV to switch itself back on. Do
not use the Power switch O on the TV.
Update with USB
It might be necessary to update the TV software. You need a PC
with an high-speed Internet connection and a USB memory
device to upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write protection is
switched off.
1 Start
2 Identify
3 Download
4 Update TV
1 Start the update on TV
To start the software update, press h > Setup > Update
software. Select USB.
2 Identify the TV
Insert the USB memory into the side of the TV, select Start and
press OK. An identification file is written on the USB memory
device.
3 Download the TV software
Insert the USB memory into your PC. On the USB memory
device, locate the file update.htm and double click it. Click on
Send ID. If new software is available, download the .zip file. After
the download, unzip the file and copy the file autorun.upg onto
the USB memory device. Do not place this file in a folder.
4 Update the TV software
Insert the USB memory into the TV again. The update starts
automatically. The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
update will continue.
At the end of the update, the message Operation succesful
appears on screen. Remove the USB memory device and press
O on the remote control.
52
Setup / Software
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Connections
5.1 First connections
Power cable
Insert the power cable into the power socket of the TV.
When disconnecting the power cable, always pull the plug, never
the cable.
Satellite antenna cable
Locate the F-type satellite antenna connection at the side of the
TV. Attach the satellite antenna cable to this connection.
Although this TV has a very low standby power consumption,
switch off the TV with the power switch to save energy if you
do not use the TV for a long period of time.
Read more about the power switch in Help > Getting started >
Keys on the TV > Power switch.
Make sure the power cable is securely inserted into the TV.
Make sure that the power plug in the wall socket is accessible at
all times.
Antenna cable
Locate the antenna connection at the back of the TV. Insert the
antenna cable securely into the Antenna a socket.
Connections / First connections
53
Download from Www.Somanuals.com. All Manuals Search And Download.
DVI to HDMI
5.2 Cables and connections
Use a DVI to HDMI adapter if your device only has a DVI
connection. Use one of the HDMI connections and add an Audio
L/R cable (mini-jack 3.5 mm) to Audio In DVI/VGA for sound,
on the back of the TV.
Cable quality
Before you connect devices to the TV, check which connectors
are available on the device. Connect the device to the TV with
the highest quality connection available. Good quality cables
ensure a good transfer of picture and sound. Read the other
chapters of Cables and connections.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital
Contents Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM (Digital Rights Management).
The connections diagrams shown in Help > Connections >
Connect devices are recommendations. Other solutions are
possible.
Y Pb Pr
Use the Component Video YPbPr connection together with an
Audio Left and Right connection for sound.
and start the Connectivity guide for TV. The guide can help you
to connect the devices you have at home.
Match the YPbPr connector colours with the cable plugs when
you connect. YPbPr can handle High Definition (HD) TV signals.
HDMI
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) TV signals. An HDMI cable
transfers picture and sound signals in only one direction (except
for the HDMI ARC). Do not use an HDMI cable longer than
5 m.
SCART
A SCART cable combines video and audio signals. SCART
connectors can handle RGB video signals but cannot handle High
Definition (HD) TV signals.
Use the included Scart adapter to connect a Scart cable.
EasyLink HDMI-CEC
If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. Read more about
EasyLink in Help > Basics > Remote control > Operate devices.
HDMI ARC connection
Connect a Home Theatre System to the HDMI ARC connection.
With HDMI ARC, the extra audio cable from the TV to the HTS
is not necessary. With one HDMI cable connected to HDMI
ARC (Audio Return Channel) both cables are combined.
Switch off HDMI ARC
In case you would like to switch off the audio return signal on
the HDMI ARC connection, press h > Setup > TV settings >
EasyLink > HDMI 1 ARC, select Off and press OK.
54
Connections / Cables and connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
If you have a device with only a Video (CVBS) connection, you
need to use a Video to SCART adapter (not supplied). Connect
the Video to Scart adapter to the included Scart adapter of the
TV. You can add the Audio L/R connections.
VGA
Use a VGA cable (DE15 connector) to connect a computer to
the TV. With this connection you can use the TV as a computer
monitor. You can add an Audio L/R cable for sound (mini-jack
3.5 mm).
To connect a computer with the VGA connection, read Help >
Connections > Connect more devices > TV as PC monitor.
Connections / Cables and connections
55
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Connect devices
SoundBar
Use an HDMI cable to connect the device to the TV.
If you use the HDMI-ARC connections on both TV and device,
no other cable is needed. If not, read on.
If you do not use the HDMI-ARC connection, add a digital audio
cable (optical).
Blu-ray Disc / DVD player
Use an HDMI cable to connect the device to the TV.
56
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Theatre System with disc player
Use an HDMI cable to connect the device to the TV.
If you use the HDMI-ARC connections on both TV and device,
no other cable is needed. If not, read on.
If you do not use the HDMI-ARC connection, add a digital audio
cable (optical).
Connections / Connect devices
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio to Video synchronisation (sync)
If the sound does not match with the video on screen, you can
set a delay on most DVD Home Theatre Systems to match the
sound and video.
Read more about Audio to Video sync in Help > Setup >
Devices > Audio to Video sync.
Do not connect the audio signal from a DVD player or other
device directly to the Home Theatre System. Always route the
sound through the TV first.
Recorder
Use 2 antenna cables to connect the antenna to the device and
the TV.
Add an HDMI cable to connect the device to the TV.
58
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital receiver / Satellite receiver
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
Use 2 antenna cables to connect the antenna to the device and
the TV.
Add an HDMI cable to connect the device to the TV.
Connections / Connect devices
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Dig. receiver + Disc Recorder
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
First, use 3 antenna cables to connect the devices to the TV.
Then use an HDMI cable to connect the digital receiver to the
TV.
Finally, use an HDMI cable to connect the Disc Recorder to the
TV.
60
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Dig. receiver + Disc-R + Home Theatre
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
First, use 3 antenna cables to connect the devices to the TV.
Then use an HDMI cable to connect the digital receiver to the
TV.
Connections / Connect devices
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Then use an HDMI cable to connect the Disc Recorder to the
TV.
Then use an HDMI cable to connect the Home Theatre System
to the TV.
If you do not use the HDMI-ARC connection on the TV and
the device, add a digital audio cable (optical).
Digital HD receiver
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
62
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
First, use 2 antenna cables to connect the device to the TV.
Use an HDMI cable to connect the device to the TV.
Connections / Connect devices
63
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4 Connect more devices
Game
Connect a game console to the side or back of the TV. You can
use an HDMI, YPbPr or SCART connection. If your game console
only has Video (CVBS) and Audio L/R output, use a Video Audio
L/R to SCART adapter to connect to the SCART connection.
Read more about Games in Help > Smart TV > Games.
Use an HDMI cable to connect the device to the side of the TV.
Or use a SCART adapter to connect the device to the TV.
HD Game
Use an HDMI cable or YPbPr and Audio L/R cables to connect a
High Definition game console to the TV.
To connect a HD Game console, read Help > Connections >
Connect more devices > Game.
Photo camera
To view photos stored on your digital photo camera, you can
connect the camera directly to the TV. Use the USB connection
on the side of the TV to connect. Switch on the camera after
you made the connection.
64
Connections / Connect more devices
Download from Www.Somanuals.com. All Manuals Search And Download.
If the list with the content of the camera does not appear
automatically, your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read the user
manual of the digital photo camera.
Camcorder
Connect a camcorder to the side or back of the TV. You can
use an HDMI, YPbPr or SCART connection. If your camcorder
only has Video (CVBS) and Audio L/R output, use a Video Audio
L/R to SCART adapter to connect to the SCART connection.
See the following pages to connect your camcorder.
Use an HDMI cable to connect the camcorder to the side of the
TV.
Or use a SCART adapter to connect the device to the TV.
Connections / Connect more devices
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard and mouse
USB keyboard
You can connect a USB keyboard to enter text on your TV.
With a keyboard connected, you can type in a new channel
name or type in what you are looking for in the YouTube app
in Net TV.
Install
Switch the TV on and connect the USB keyboard to one of the
USB connections on the side of the TV. When the TV detects
the keyboard, you can select your keyboard lay-out and test your
selection.
If you select a Cyrillic or Greek keyboard lay-out first, you can
select a secondary Latin keyboard lay-out.
To change the keyboard lay-out setting, press h > Setup > TV
settings > Preferences > USB mouse and keyboard > Keyboard
settings and press OK.
TV keys on your keyboard
For channel renaming . . .
- Enter  = OK
- Backspace z = delete character before cursor
- Navigation keys = navigate within a text field
- To switch between keyboard lay-outs, if a secondary lay-out is
set, press the Alt + Shift keys simultaneously.
66
Connections / Connect more devices
Download from Www.Somanuals.com. All Manuals Search And Download.
For use with Net TV . . .
- Tab and Shift Tab = Next and Previous
- Home = scroll to the top of the page
- End = scroll to the bottom of the page
- Page Up = jump one page up
- Page Down = jump one page down
- + = zoom in one step
- - = zoom out one step
- * = fit to width
USB mouse
You can connect a USB mouse to navigate pages on the Internet.
On an Internet page, you can select and click on links more
easily. The USB mouse cannot navigate in Net TV app pages nor
navigate in the TV menus.
Install
Switch the TV on and connect the USB mouse to one of the
USB connections on the side of the TV. You can also connect
the USB mouse to a connected USB keyboard.
Mouse clicks
- Left click = OK
- Right click = Back È
You can use the scroll wheel to scroll pages up and down.
TV as PC monitor
You can connect the TV to your home network wireless. With
Wi-Fi MediaConnect, you can use the TV as a PC monitor. Read
Help > Setup > Network > Wi-Fi MediaConnect.
Read on to connect a computer to the TV as a PC monitor
wired. You can use a VGA cable or a DVI to HDMI adapter.
Use a VGA cable to connect the PC to the VGA connector and
an audio L/R cable to connect the VGA Audio L/R to the back
of the TV.
Connections / Connect more devices
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Use a DVI to HDMI adapter to connect the PC to HDMI and an
audio L/R cable to connect the Audio L/R to the back of the TV.
Ideal TV setting
Set the TV picture format to Unscaled for the sharpest picture
quality. While watching TV, press t ADJUST, select Picture
format and select Unscaled.
For a list of supported resolutions see Help > Specifications >
Display resolutions.
68
Connections / Connect more devices
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5 Network
Wireless
To set up the wireless network connection, read Help > Setup >
Network.
Wired
To set up the wired network connection, read Help > Setup >
Network
Connect the router to the TV with a network cable. To fulfil
EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
Connections / Network
69
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6 SD card
Memory size
To store videos downloaded from a Video store on Net TV, you
need to insert an SD memory card into the TV SD card slot.
Once formatted, leave the card permanently in the slot.
SD memory card size
Use a SD HC (High Capacity) memory card with at least 4GB of
storage capacity.
For high-definition (HD) video, use an SD card with at least 8GB
of storage capacity. Use a speed class 2 card or more.
Read more about renting videos in Help > Smart TV > Net TV
> Video stores.
Insert the card
Make sure to unlock the SD memory card before you insert it.
To format the SD card, switch on the TV and insert the SD card
into the SD card slot. The TV will automatically start formatting.
Leave the SD card permanently in the slot.
70
Connections / SD card
Download from Www.Somanuals.com. All Manuals Search And Download.
5.7 Common interface CAM
CAM
Scrambled digital TV channels can be decoded with a Conditional
Access Module (CAM). Digital TV service operators provide the
CAM when you subscribe to their services. Contact a digital TV
service operator for more information and to see terms &
conditions.
Insert a CAM
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
insertion can damage the CAM and the TV.
Look for the common interface slot on the back of the TV.
Gently insert the CAM as far as it will go and leave it in the slot
permanently.
It can take a few minutes before the CAM is activated. Removing
the CAM will deactivate the service on TV.
Watching a CAM service
If a CAM is inserted and subscription fees have been paid, the
TV shows the programme from the digital TV service provider.
The applications, their function, the content and the onscreen
messages all come from the CAM service.
CAM settings
To set passwords or PIN codes for the CAM service, press h
> Setup > Channel settings > Common Interface. Select the
CAM provider and press OK.
CI+
This TV can handle the CI+ conditional access.
CI+ allows service providers to offer premium HD digital
programmes like movies and sports with a high level of copy
protection.
To insert a CI+ CAM, read chapter CAM - Conditional Access
Module.
Connections / Common interface CAM
71
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Troubleshooting
6.1 Contact information
If the advice and suggestions in Troubleshooting do not help
resolve the problem, try switching the TV off and back on again.
Warning
If your TV breaks down, NEVER try to repair the TV yourself.
Consumer Care
If the TV problem is not solved you can call the Consumer Care
hotline in your country. Look up the TV model and serial number
before you call. Find the telephone number on the
documentation that came with the TV. Or consult our website
TV model number and serial number
Find these numbers on the packaging label or on the type label
on the back or bottom of the TV.
72
Troubleshooting / Contact information
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 TV and remote control
The TV does not switch on
• Switch the TV off and on again with the switch on the bottom
of the TV.
• Check the power cable connection.
• Try using the keys on the TV to switch on.
The TV does not switch on from standby
• Check that the batteries of the remote control are not empty
or weak. Check their + / - orientation.
• Try using the keys on the TV to switch on.
The TV does not respond to the remote control
• Check that the batteries of the remote control are not empty
or weak. Check their + / - orientation.
• Clean the remote control and TV sensor lens.
• During start-up, which can take up to two minutes with
connected devices, the TV and some external devices do not
immediately respond to commands from the remote control. The
device is functioning normally and is not broken.
The TV switches off and the red light flashes
• Switch the TV off and on again with the switch at the bottom
of the TV. Check if there is enough space for ventilation. Wait
until the TV has cooled down.
If the TV does not restart from standby and the light flashes
again, call Consumer Care.
You forgot your code to unlock Child lock?
Read Help > Smart TV > Locks and timers > Child lock.
Troubleshooting / TV and remote control
73
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 TV channels
Some TV channels are gone
• Check if the correct list is selected in the Channel list. Press ¬
FIND to open the Channel list, then press r OPTIONS and
select the list you need with Select list.
• A channel could be hidden in the Channel list. Read more
about Channel list in Help > Basics > Watch TV > Channel list.
No digital channel found during installation
• Check if the TV supports DVB-T or DVB-C in your country.
Check the 'Digital TV Country Compatibility' sticker on the back
of the TV.
74
Troubleshooting / TV channels
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4 Picture and sound
No picture
• Check if the antenna is connected properly.
• Check if the correct device is selected and connected properly.
• Check the contrast or brightness setting in h > Setup > TV
settings > Picture > Contrast or Brightness.
The picture is poor
• Bad weather can influence the picture quality.
• Check if the antenna is connected properly.
• Non-earthed audio devices, neon lights, high buildings or
mountains can influence the picture quality. Try to improve the
picture by changing the position of the antenna or placing devices
away from the TV.
• Check that the correct TV system is chosen in the Manual
installation menu.
• If only a certain channel is poor, try to fine tune this channel
with the Fine tune menu.
Read Help > Setup > Channels > Manual installation - Analogue.
The picture has poor colour
• Check the colour settings in h > Setup > TV settings. Or
press r OPTIONS to select a Smart picture setting.
Picture delay when a game console is connected
• To prevent picture delay, press r OPTIONS, select Smart
picture > Game.
The TV does not remember my settings when I switch it back
on
• Check whether the TV is set to the Home location. Press h
> Setup > TV settings > Preferences > Location.
The picture does not fit the screen
• Press r OPTIONS, Picture format and select Auto fill.
The picture position on screen is not correct
• To correct a shifted picture, press r OPTIONS and select
Picture shift. Use the navigation keys to adjust the picture
position. Press OK to stop Picture shift.
• If distorted screen edges are visible, press h > Setup > TV
settings > Picture > Screen edges and use the slider bar to
enlarge the picture slightly.
There is a picture but no sound
• Check the volume is not set to 0.
• Check the sound has not been muted with m.
• Check that all cables are connected properly.
• If no sound signal is detected, the TV automatically switches off
sound. This is proper operation and is not a malfunction.
The sound is poor
• Try any Smart sound setting, press r OPTIONS, Smart
sound.
• Check that the sound is set to Stereo.
The sound comes from one speaker only
• Check the Balance setting. Press h > Setup > TV settings >
Sound > Balance. Use the slider bar to set the balance.
Sound delay
• If there is an audio to video sync mismatch when sound comes
from a Home Theatre System, an audio sync delay needs to be
set up. Read more about Audio to Video sync in Help > Setup
> Devices > Audio to Video sync.
Troubleshooting / Picture and sound
75
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 Devices
HDMI connections
• The HDMI-HDCP procedure might take a few seconds before
the picture from a device appears.
• If the TV does not recognise the device and there is no
picture, try switching from one device to another and back again
to restart the HDCP procedure. Or switch the device off and
back on again.
• If sound interruptions occur persistently, see the user manual of
the device to check the output settings. If that does not help,
connect an additional audio cable.
• If a DVI to HDMI adaptor is used, check that an additional
audio connection is in place to complete the DVI connection.
EasyLink HDMI-CEC
• Check if the connected device supports the HDMI-CEC
standard and is properly set up. Read the user manual that comes
with the device.
• Check if the HDMI cable is properly connected.
• Check if EasyLink on the TV and device is switched on.
• Make sure that the System audio control in your HDMI-CEC
audio devices is properly set up. Read the user manual that
comes with your audio device.
PC display
• The refresh rate of a PC connected to the TV with VGA or
DVI to HDMI adapter should set to 60Hz.
• Check that the correct resolution mode is selected on your
PC. See the list in Help > Specifications > Display resolutions.
76
Troubleshooting / Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6 Videos, photos and music
The files on my USB device are not shown
• Set your device (camera) to ‘Mass Storage Class’ compliant.
• The USB device may need specific driver software.
Unfortunately, this software cannot be downloaded to your TV.
• Not all audio and picture files are supported. See the list in
Help > Specifications > Multimedia.
Files from a USB device do not play back smoothly
• The transfer performance of the USB device limits the transfer
rate.
The files on my PC are not shown
• To look for files on your home network with Browse PC,
your PC media server software should be set up to share the
files with the TV. See the list of compatible Media server
software in Help > Specifications > Multimedia.
Troubleshooting / Videos, photos and music
77
Download from Www.Somanuals.com. All Manuals Search And Download.
6.7 Network
Wireless network not found or distorted
• Microwave ovens, Dect phones or other WiFi 11b devices in
your neighbourhood might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation. Read Help > Setup >
Network > Wired installation.
Net TV does not work
• If the connection to the router is OK, check the router
connection to the Internet.
Browse PC or Net TV work slow
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• You need a high-speed (broadband) Internet connection for
your router.
78
Troubleshooting / Network
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Specifications
7.1 Software
Software version
To view the current TV software version, press h > Setup >
Software settings and press OK. Select Current software info
and read Version:.
Open source software
This television contains open source software. TP Vision
Netherlands B.V. hereby offers to deliver, upon request, a copy
of the complete corresponding source code for the copyrighted
open source software packages used in this product for which
such offer is requested by the respective licences.
This offer is valid up to three years after product purchase to
anyone in receipt of this information. To obtain the source code,
If you prefer not to use email or if you do not receive a
confirmation receipt within a week after mailing to this email
address, please write in English to . . .
Open Source Team, TP Vision Netherlands B.V.
Intellectual Property and Standards
P.O. Box 220
5600 AE Eindhoven
The Netherlands
Read the Open Source Licences in Help > Getting started >
Open Source Licences.
Specifications / Software
79
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Environmental
EU Energy Label
EU Energy label
The European Energy Label informs you on the energy efficiency
class of this product. The greener the energy efficiency class of
this product is, the lower the energy it consumes.
On the label, you can find the energy efficiency class, the average
power consumption of this product in use and the average
energy consumption for 1 year. You can also find the power
consumption values for this product on the Philips website for
your country at
www.philips.com/TV
Energy saving
80
Specifications / Environmental
Download from Www.Somanuals.com. All Manuals Search And Download.
Light sensor
To save energy, the built-in ambient light sensor lowers the
brightness of the TV screen when the surrounding light darkens.
Energy saving
The energy saving Smart picture setting, combines several TV
settings that result in saving energy.
Low standby power
The class-leading and highly advanced power circuitry brings down
the power consumption of the TV to an extremely low level,
without losing out on the constant Standby functionality.
Please find out for yourself about the local rules on separate
collection of batteries because correct disposal will help to
prevent negative consequences for the environment and human
health.
Power management
The advanced power management of this TV ensures the most
efficient use of energy. You can check how your personal TV
settings, the level of brightness in current onscreen pictures, and
the surrounding light conditions determine the relative power
consumption.
To check the relative power consumption, press h > Setup
and press W. Select Watch demos > Active control and press
OK. Select a Smart setting to check the corresponding values.
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.
Specifications / Environmental
81
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Power and reception
Power
Product specifications are subject to change without notice. For
more specification details of this product, see
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : < 0.15W
• Power saving features : Light sensor, Eco mode, Picture mute
(for radio), Auto switch-off timer, Eco settings menu.
The power rating stated on the product typeplate is the power
consumption for this product during normal household use (IEC
62087 Ed.2). The maximum power rating, stated between
brackets, is used for electrical safety (IEC 60065 Ed. 7.2).
Reception
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K, DVB-T2 :
only for TV types '. . . T/12', DVB-C (cable) QAM
• Analogue video playback : NTSC, SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2),
MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
• See selected countries on the TV type plate
• Satellite aerial input : 75 ohm F-type
• Input frequency range : 950 to 2150MHz
• Input level range : 25 to 65 dBm
• DVB-S/S2 QPSK, symbol rate 2 to 45M symbols, SCPC and
MCPC
• Preset for satellites : Astra (19.2°E), Astra (23.5 °E), Astra (28.2
°E), Hotbird (13.0 °E), TürkSat (42.0 °E)
• Astra HD+ support
• LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity selection
14/18V, Band selection 22kHz, Tone burst mode, LNB current
300mA max
• See selected countries on the TV type plate
82
Specifications / Power and reception
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 Display and sound
Display / Picture
• Diagonal size :
- 37PFL9606 : 94 cm / 37"
- 40PFL9606 : 102 cm / 40"
- 46PFL9706 : 117 cm / 46"
- 52PFL9606 : 132 cm / 52"
• 3D Max
• Picture enhancement :
- Perfect Pixel HD Engine
- Wide Colour Gamut
- Scanning backlight
• Display type : LED Pro Full HD, LED backlight
• Panel resolution : 1920 x 1080p
• Colour processing : 2250 trillion colours 17bit RGB
• Brightness : 500 cd/m2
• Dynamic contrast :
- 5.000.000 : 1
- 100.000.000 : 1 for 46PFL9706
• Response time (typical) : 0.5 (BEW equiv.) ms
Sound
• Output power (RMS) : 40W @30%THD
• Dolby Digital, Dolby Digital Plus, Dolby Pulse - Dolby and the
double-D symbol are registered trademarks of Dolby
Laboratories.
• Speaker types : 2 woofers in Soundstage stand
Specifications / Display and sound
83
Download from Www.Somanuals.com. All Manuals Search And Download.
7.5 Display resolutions
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz
• 1080p - 50 Hz, 60 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p — 60 Hz
• 800 x 600p — 60 Hz
• 1024 x 768p — 60 Hz
• 1280 x 768p — 60 Hz
• 1360 x 765p — 60 Hz
• 1360 x 768p — 60 Hz
• 1280 x 1024p — 60 Hz
• 1920 x 1080i — 60 Hz
• 1920 x 1080p — 60 Hz
84
Specifications / Display resolutions
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6 Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11b/g/n (built-in)
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : MPEG Program Stream, MPEG Transport Stream,
AVI, MPEG-4, Matroska, Windows Media, ASF
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4
AVC (H264), WMV9
• Audio Codecs : MP3, AAC, HE-AAC V1, HE-AAC V2, WMA,
AC3
• Image Codecs : JPEG
• Limitations : WMA (V2 up to V9.2), MPEG-4 AVC (up to level
4.0)
Supported DLNA media server software (DMS)
• Windows Media Player 11 (for Microsoft Windows XP, Vista
or Windows 7)
• TVersity 1.9.3 (pro) (for Windows XP)
• Twonky Media — PacketVideo 4.4.9 (for PC and Intel MacOX)
• Nero 9 — Nero MediaHome (for Microsoft Windows XP)
• Sony Vaio Media Server (for Microsoft Windows XP or Vista)
• Sony PS3 media server (for Windows XP)
• Google Media Server (Google desktop) (for Windows XP)
• DiXiM (for Windows XP)
• Macrovision Network Media Server (for Windows XP)
• Philips NAS SPD8020 (v. 1.2.9.47)
• Fuppes (for Linux)
• uShare (for Linux)
Supported DLNA mobile devices (DMS/DMC)
• Nokia N78, N80, N81, N82, N92, N93, N93i, N95, N96,
N800, N810
• Samsung SGH-i780
ESD regulations
This apparatus meets performance criteria A for ESD. In case the
apparatus does not recover in DLNA mode due to electrostatic
discharge, user interference is required.
Specifications / Multimedia
85
Download from Www.Somanuals.com. All Manuals Search And Download.
7.7 Connectivity
TV Rear
• EXT1 SCART (adapter included): Audio L/R, CVBS in, RGB
• EXT2 YPbPr: Y Pb Pr, Audio L/R
• VGA (D-sub 15)
• HDMI 1 in ARC (v1.4 - 3D)
• HDMI 2 in (v1.4 - 3D)
• HDMI 3 in (v1.4 - 3D)
• Audio In (DVI to HDMI / VGA) (stereo mini-jack 3.5mm)
• Audio Out L/R — display synchronised (optical)
• Headphones (stereo mini-jack 3.5mm)
• Network LAN — (RJ45)
TV Side
• HDMI Side in (v1.4 - 3D)
• 2x USB
• Common interface slot (CAM)
• SD card slot (SD High Capacity) (as Video stores memory)
86
Specifications / Connectivity
Download from Www.Somanuals.com. All Manuals Search And Download.
7.8 Dimensions and weights
32PFL9606
Width 761 mm
Height 478 mm
Depth 34 mm
Weight ±9 kg
. . . with TV stand
Height 533 mm
Depth 214 mm
Weight ±12 kg
37PFL9606
Width 884 mm
Height 548 mm
Depth 34 mm
Weight ±11 kg
. . . with TV stand
Height 604 mm
Depth 244 mm
Weight ±14 kg
46PFL9706
Width 1083 mm
Height 660 mm
Depth 43 mm
Weight ±16 kg
. . . with TV stand
Height 718 mm
Depth 244 mm
Weight ±19 kg
52PFL9606
Width 1217 mm
Height 736 mm
Depth 44 mm
Weight ±20 kg
. . . with TV stand
Height 793 mm
Depth 274 mm
Weight ±24 kg
UMv 3104 327 0063.4 - 120229
Specifications / Dimensions and weights
87
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI ARC 54
HDMI connection 54
Headphone volume 40
Help, Search 12
Index
Home menu 16
3
3D depth 22
3D glasses 22
3D, 2D to 3D 22
3D, start 22
I
Infrared sensor 14
Internet 48
ISF Calibration, picture 41
A
K
Adjust menu 16
Keyboard, on screen 19
Age rating, satellite 25
Ambilight colour 42
Ambilight, setup 42
Ambilight, switch on 42
Audio Description 51
Audio Out delay 50
Auto switch off 40
L
Lock code 28
M
Media server software 85
Moth eye
Music with photos 33
8
B
Balance 40
Black bars 21
N
Net TV 29
Net TV, connection 29
Net TV, open 30
Network, wired connection 69
Network, wired installation 49
Network, wireless installation 48
C
CAM 71
Channel list copy 44
Channel list copy, satellite 47
Channel list, options 18
Channel, favourite 19
Channel, rename 19
Channel, reorder 18
Channel, switch 18
Channel, update 44
CI+ 71
O
One Touch Play 14
Online, rental video 30
Open source software 79
Options menu 17
Clock 45
P
Common interface slot 71
Component Video YPbPr 54
Connections 54
Parental rating 28
Parental rating, satellite 25
Pause TV 35
Connections, guide 54
Consumer Care 72
Pause TV, installation 35
PC, browse 33
PC, connect 33
PC, monitor 67
Perfect Pixel HD Engine 40
Photos 33
Photos, slideshow 33
Picture settings 40
Picture shift 17
Play videos 33
Power consumption 81
Product recycling 81
D
Device, add 16
Device, remove 16
Device, rename 16
Device, reorder 16
Digital Text 38
DVB 45
DVD player, connect 56
DVI to HDMI adapter 54
R
E
Radio channels 18
Reception quality 45
Recording, installation 35
Recording, watch a 36
Rental video 30
Router 48
EasyLink, remote control 50
Eco settings 40
Encryption method 48
ESD 85
Expired recording 36
F
S
Failed recording 36
Find 16
Satellite channel, favourite 25
Satellite channel, remove 47
Satellite channel, rename 24
Satellite channel, reorder 24
Satellite channel, signal 47
Satellite channel, update 47
Satellite, add 46
G
Game console 37
Gamma 40
H
Satellite, installation 46
Satellite, LNB 46
Satellites, search for 46
Screen edges 40
HbbTV 32
HbbTV, block 32
HbbTV, pages 32
HD TV
HD video clip
6
SD card, install 70
6
Index
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Select list 18
Smart setting, sound 20
Smart settings, reset 41
Software, current version 52
Software, Internet update 52
Software, USB update 52
Sound settings 40
Subtitle, auto shift 50
Subtitles, language 28
Subtitles, On during mute 28
Surround mode 14
Surround sound 17
System standby 14
T
Text, dual screen 38
Text, freeze 38
Text, setup 39
Text, T.O.P. overview 38
TV network name 49
TV tour
5
U
Universal access 51
USB Hard Drive 35
USB Hard Drive, installation 35
USB keyboard 66
USB mouse 67
USB, browse 33
V
Video (CVBS) connection 55
Video selection 18
W
Wall colour 42
Watch satellite 24
Watch TV 18
WEP security encryption 48
WPA security encryption 48
WPS (Wi-Fi Protected Setup) 48
Index
89
Download from Www.Somanuals.com. All Manuals Search And Download.
L"#&(%&+,#;"'-(&,"#
!"#$%&'%(
6"$*(%4
ǝǻǾǾǵȌ
HMHH+NNN+OONP
HMIM+GIH+INH+S#(&,"#(*+%(**V
ꢊꢉꢊꢀꢀꢉꢁꢁꢂꢀꢀꢀꢀꢃꢂꢋǮDzǾǼǸǭǿǺǻꢌ
7)/#"0+3,'/0+HMIH+NNN+OOMG
1RUWKHUQꢀ,UHODQG
6XLVVHꢀꢁꢀ6FKZHL]ꢀꢁꢀ6YL]]HUD
)$*#'+,-,)$*#'./$
HMNN+QQM+HN+MM+SR:1-,#+7K+*(#8*,#/V
HMNM+HHH+GPI+SHTHMI+Lab1Z,#?V
HOH+OHH+HQR+SHTIRU1-,#?V
.DǴDǷFǿDǺ
ǞǽǮǵȔǭ
)"(0'*
M+MHH+GHHH+HH+HN+S;'//V
[QMI+IIN+NNH+MNI+Sc"B(*#,+:"],5V
HMHH+OHI+HGNR
9("+@()*"+GPQM+HGNR
7(&8'(
6ORYDNLD
YYIY+QGYQ+SE(*0&0+&/*/;"#(+]5(#0V
G+QQG+IRN+PQ+S!W'"8#d+&/*/;`##F+6"5"'V
ǎȇǸǭǽǵȌ
ꢀꢁꢂꢃꢄꢅꢆꢂꢁꢇꢈꢂꢉꢂǙDzǾǿDzǺꢂǽǭǴǰǻǯǻǽ
7'&3/(%'(
6ORYHQLMD
ꢊꢂꢍꢂꢁꢅꢃꢂꢀꢁꢄꢈꢂꢋ1DFLRQDOLQĒꢂVNDPEXWLVꢌ
ꢅꢂꢊꢊꢊꢂꢊꢈꢂꢅꢁꢂꢋ'UçDYQLꢂWHOHIRQVNLꢂNOLFꢌ
ćHVNiꢀUHSXEOLND
GGMMMHMPR+S!W'"8#X+5"*W#XV
/X[HPERXUJꢀꢁꢀ/X[HPEXUJ
6XRPL
GNMO+IIHH+S!(&,"#(*/+^);+1+(::/*+#(&,"#(*V
HP+MM+YG+RH+NH
'DQPDUN
QRGR+MQIN
0DJ\DURUV]iJ
:8$"'#$
HY+I+OHH+MIRI+S_'0]W."0+;/*6X5W0V
HM+ROPG+PHPY+S*"B(*0(-&(*V
1$/&23*(%4
HIMH+RHI+HN+YP+SHTINU1Z,#?V
9$4$"*(%4
HPHH+GHG+HM+OI+SHTIHU1-,#?V
ประเทศไทย+SK6(,*(#8V
HG+YRG+OYRH
ƆƫƫƜƤơ
ꢁꢅꢅꢅꢄꢊꢈꢀꢁꢊꢂꢋƆƨƭƩƪƞꢂƪƫƞƳƧꢌ
1RUJH
7UNL\H
GG+PO+IP+IN
NNN+M+NNR
(VSDxD
PHG+MM+IH+MQ+SHTIHU+[+HTHMU1-,#?V
gVWHUUHLFK
8QLWHGꢀ.LQJGRP
HMGH+NH+II+QQ+SHTINRU1Z,#?V
HMNN+QQM+HN+MM+SR:1-,#+7K+*(#8*,#/V
(VWRQLD
YYMQHYI+S',,.,0,0/0/+B\#/V
3ROVND
ǠǷǽǭȓǺǭ
ꢁꢁꢂꢈꢄꢇꢂꢅꢍꢂꢀꢃꢂꢋSRãĀF]HQLHꢂ1DURGRZ\ꢌ
ꢀꢉꢊꢀꢀꢉꢍꢀꢀꢉꢃꢊꢀꢂꢋǮDzǴǷǻȅǿǻǯǺǻꢌ
5"(%2$
HI+RO+QG+NH+RH+S*"%(*V
3RUWXJDO
OHO+OM+HG+GR+SHTIGU1-,#?+$+Z`5/*+
HTQHU1-,#?V
+UYDWVND
HI+OOO+YY+HI+S#(%,"#(*#,+:"],5V
>>>?:6,*,:0?%"-10)::"'&
5RPüQl
6&(*'(
ꢀꢈꢅꢂꢆꢈꢀꢀꢀꢃꢁꢂꢋQDŗLRQDOHꢂGHꢂDSHOꢂWHOHIRQLFꢌ
HGNR+GM+OH+IN+S%6,(-(&(+#(],"#(*/V
!"#$%"#&'(%&)(*+,-(./0+1+2-(./0+#"#+%"#&'(%&)/**/0+1+3)4/'5/'&'(.*,%6/+7,*8/'
9:/%,;,%(&,"#0+('/+0)<=/%&+&"+%6(#./+>,&6")&+#"&,%/?
@6,*,:0+(#8+&6/+@6,*,:0A+06,/*8+/-<*/-+('/+'/.,0&/'/8+&'(8/-('B0+";+C"#,#B*,=B/+@6,*,:0+D*/%&'"#,%0+!?E?
(#8+('/+)0/8+)#8/'+*,%/#0/+;'"-+C"#,#B*,=B/+@6,*,:0+D*/%&'"#,%0+!?E?
3**+'/.,0&/'/8+(#8+)#'/.,0&/'/8+&'(8/-('B0+('/+:'":/'&F+";+&6/,'+'/0:/%&,5/+">#/'0?
GHIG+J+K@+E,0,"#+!/&6/'*(#80+7?E?+++3**+',.6&0+'/0/'5/8?
>>>?:6,*,:0?%"-
Download from Www.Somanuals.com. All Manuals Search And Download.
|