BLU-RAY DISC & HDD RECORDER
INSTRUCTIONS
SR-HD2500US
HDD
REC
BD
REC
OPEN/
CLOSE
REC
MODE
INPUT
SELECT
MIDIA SELECT
BD/SD
DIRECT/
MONITOR
STANDBY/ON
RESET
HDD
STOP
REV
PLAY
FWD
PAUSE
REC
HDV/DV IN
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear of
cabinet. Retain this information for
future reference.
Model No.
Serial No.
LST1302-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution
CAUTION:
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Declaration of Conformity
Model Number:
SR-HD2500US
Trade Name:
JVC
Responsible Party: JVC Americas Corp.
Address:
1700 Valley Road Wayne, N.J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10)Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11)Only use attachments/accessories specified by the
manufacturer.
12)Use only with the cart, stand, tripod,
bracket, or table specified by the
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
"This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense."
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-
over.
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10cm or more on both sides, on top and at the rear).
13)Unplug this apparatus during lightning
S3125A
storms or when unused for long periods
of time.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Use the supplied power cord.
(If not, fire or electric shock may be caused.)
DON'T continue to operate the equipment if you are in any doubt
about it working normally, or if it is damaged in any way -- switch
off, withdraw the mains plug and consult your dealer.
DO be careful with glass panels or doors on equipment.
DO consult you dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
NEVER let anyone especially children push anything into holes,
slots or any other opening in the case -- this could result in a fatal
electrical shock.
14)Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc/cassette.
1. DO NOT place the unit ^
^ in an environment prone to extreme temperatures or
humidity.
^ in direct sunlight.
^ in a dusty environment.
^ in an environment where strong magnetic fields are
generated.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you move it from
a cold place to a warm place, or under extremely humid
conditions^just as water droplets form on the surface of a glass
filled with cold liquid. In conditions where condensation may occur,
disconnect the unit’s power plug from the wall and keep it
disconnected for a few hours to let the moisture dry, then turn on
the unit.
^ on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution
DISCLAIMER OF LIABILITY
JVC shall not be liable for any loss relating to the unit’s failure to
properly record, store or playback any content (video, audio or
otherwise) for any reason whatsoever. Any applicable warranties
shall only cover replacement or repair of the effected unit, and shall
not apply to recovery or replacement of lost content.
● Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
● Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio | Essential is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
● This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Rovi Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
● DVD logo is a registered trademark of DVD Format/Logo
Licensing Corporation.
ATTENTION:
Using a mobile phone in the vicinity of the unit may cause
picture vibration on the TV screen or change the screen to a
black back display.
Some TVs or other appliances generate strong magnetic
fields. Do not place such appliances on top of the unit as it
may cause picture disturbance.
When moving the product, press A to turn off the power,
and wait at least 30 seconds before unplugging the power
cord. Then, wait at least 2 minutes before moving the
product.
If there is a power outage when using the unit, the recorded
data may be erased.
It is recommended to back up discs which contain important
recordings periodically (every few years). As digital signals
do not deteriorate, failure to play back or record might arise
due to the effects of the disc aging through the years
depending on the storage environment.
Recorded programs and data cannot be restored once the
disc or tape is damaged.
● HDMI, the HDMI Logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
● Blu-ray Disc and the Blu-ray Disc logo are trademarks of Blu-ray
Disc Association.
● “x.v.Color” and the “x.v.Color” logo are trademarks of Sony
Corporation Co., Ltd.
● Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United
States and other countries.
● This unit can play back and record only NTSC signals.
The hard disk is a consumable item. Replacement is
recommended after 10000 hours of use (if use in a 25°C
environment). For information on maintenance planning and
costs, consult your nearest JVC dealer.
The fan motor is a consumable item. Replacement is
recommended after 30000 hours of use (if use in a 25°C
environment). For information on maintenance planning and
costs, consult your nearest JVC dealer.
● The SDHC logo is a trademark of SD-3C, LLC.
● iLINK and the iLINK logo are trademarks.
● “AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
● Other product and company names included in this instruction
manual are trademarks and/or registered trademarks of their
respective holders.
If this symbol is shown, it is only valid in the European
Union.
● This product is licensed under the AVC patent portfolio license
and VC-1 patent portfolio license for the personal and non-
commercial use of a consumer to (i) encode video in compliance
with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”)
and/or (ii) decode AVC/VC-1 Video that was encoded by a
consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide
AVC/VC-1 Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG
LA, LLC. See http://www.mpegla.com.
HOW TO USE THIS INSTRUCTION MANUAL
● All major sections and subsections are listed in the Table Of
Contents on page 5. Use this when searching for information on
a specific procedure or feature.
● The A mark signals a reference to another page for instructions
or related information.
● Operation buttons necessary for the various procedures are
clearly indicated through the use of illustrations at the beginning
of each major section.
Batteries -- Incorrect use of batteries may cause the batteries
to burst or ignite. A leaky battery may corrode the equipment,
dirty your hands or spoil your clothing. In order to avoid these
problems, make sure to observe the precautions below:
● Use the specified batteries only.
● Install the batteries with due attention to the plus (+) and
minus (-) sides of the batteries according to the instructions in
the compartment.
BEFORE YOU INSTALL YOUR NEW UNIT . . .
. . . please read the sections/literature listed below.
● “Cautions” on page 2
“IMPORTANT SAFETY INSTRUCTIONS” on page 3 to 4
● Do not mix old and new batteries.
● Do not mix batteries of different types. Voltage specifications
of batteries of the same shape may vary.
● Replace an exhausted battery with a new one promptly.
● If you will not use the remote control for a long time, remove
the batteries.
● If leaked battery fluid gets on your skin or clothing, rinse
immediately and thoroughly. If it gets into you eye, bathe your
eye well rather than rubbing and seek medical treatment
immediately. Leaked battery fluid that gets into your eye or
your clothing may cause a skin irritation or damage your eye.
●
Do not put the batteries in a place where young children can reach.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Equipped with SDI output terminal
You can connect this unit directly to an SDI system without
using any converter or peripheral device.
Key Features
Professional Blu-ray Disc recorder of the
high-definition era
Copy videos to a Blu-ray Disc in high-definition from a high-
definition camcorder, or down convert the videos and record
them onto DVDs, all without the need for a PC.
The internal hard disk drive enables for easy editing and
dubbing multiple discs.
Supports direct recording to discs
You can record contents directly to an optical disc (BD-R/RE,
DVD-R/RW).
How to Read this Manual
Compatible with ProHD Camcorder GY-
HM700/100
MOV files that are taken in SP mode (*1) and HQ mode (*2)
using the JVC ProHD Camcorder GY-HM700/100 are
compatible with the SR-HD2500, and can be imported into
the HDD or dubbed onto discs.
About this manual
This manual mainly describes operation procedures using the
remote control unit buttons.
v
The buttons on the remote control unit are indicated as
[Button Name].
:
:
(*1) SP mode
(*2) HQ mode
1280x720/60p, 30p, 24p, 1440x1080/60i
1280x720/60p, 30p, 24p, 1440x1080/60i,
1920x1080/60i, 30p, 24p
v
The menu items are indicated as “Menu Item”.
m
Supplementary remarks in the main text
:
Memo States restrictions on the functions or use of this unit.
Compatibility with other consumer
camcorders
In addition to AVCHD, HDV and DV, JVC Everio file formats
are also compatible, and digital dubbing can be done.
:
:
Note
States precautions to be taken during operation.
Indicates the page numbers or items to refer to.
A
Memo:
The displays of operable media are highlighted.
:
:
:
:
HDD
DVD
BD
Hard disk
DVD
Digital interface that allows for camcorder
compatibility
This unit is equipped with USB, SD slots and i.Link input
terminals for connecting the camcorder.
Blu-ray disc
SD card
SD
:
SDHC SDHC Card
Create menu-supported Blu-ray discs
:
CD
Music compact disc
Blu-ray discs can be created using the BDMV (with menu)
format. BDAV discs can also be created and dubbed
according to the intended use.
:
JPEG JPEG (still picture) file disc
Refer to the supplied CD-ROM for the Spain and French
GUIDEBOOK.
In order to view the GUIDEBOOK, AdobeT AcrobatT
ReaderE or AdobeT ReaderT must be installed.
AdobeT ReaderT can be loaded from Adobe’s
web site:http://www.adobe.com/
The SR-HD2500 also enable users to use an original image
as the background.
Compatible with dual layer 50 GB Blu-ray
discs, and records up to 24 hours of full
high-definition images in a single disc
This unit is also compatible with high capacity dual layer 50
GB Blu-ray discs, and up to 24 hours (AE mode) of full high-
definition images can be recorded in a single disc.
Menu operation
Pressing the remote control buttons below calls up the
respective menu screens.
Writing to inexpensive LTH discs is also supported.
v
[SET UP], [NAVIGATION], [EDIT], [INFORMATION
CORRECT], [DUBBING], [MEDIA MANAGE]
Authoring menu enables discs to be
created and used industrially such as for
demonstrations
Disc authoring can be used to create discs for industrial use,
such as discs that repeat playback automatically.
v
Press any of the [ J / K / H / I ] buttons to move to a
specific menu item (yellow item indicated by a small arrow).
v
Press the [OK] button to confirm the selection.
v
v
Press the [RETURN] button to return to the previous screen.
Simple instructions on the operation procedure may be
displayed at the bottom of the screen.
Equipped with external control RS-232C
terminal
This unit is equipped with a RS-232C terminal that allows for
external control using a PC.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disclaimer of compensation for loss or
Other Precautionary Notes
damage of stored video content
Please note that our company will not be liable for compensation
of the content or any incidental damages in the event that
dubbing or playback cannot be performed properly for some
reasons. The same applies during repair of this unit.
Copyright protection
This unit supports copyright protection technologies.
Copyrights
According to the copyright law, video or music data that you
Handling precautions
v
m
Do not use the plug or power point with dust
store must not be used for purposes other than personal
enjoyment without the authorization of the copyright holder.
or metallic objects attached to it
v
v
Failure to do so may cause short circuit or heating, and
The copyright protection function prevents copyrighted video
result in fire or electric shock.
images from being saved to equipment such as a video
recorder. This function may also cause deterioration in the
playback picture quality when the data is output to a monitor
through a video recorder. This is not a hardware malfunction.
To play back copyrighted videos, connect this product directly
to the monitor.
v
Remove the plug once every half a year, and clean it with a
dry cloth.
m
Make use of a power point that allows the
power plug to be inserted or removed easily
v
v
Make sure that the plug can be removed immediately in
Read and understand fully the terms and conditions of all
case an abnormality is found in the unit.
copyright works before using this unit in the correct
manner. Under no circumstances shall JVC KENWOOD
take any responsibility for any infringements of copyright
caused by the customer when using this unit. The customer
shall be responsible for resolving all legal issues regarding
to any copyright infringements.
m
Insert the plug firmly into the power point
Failure to do so may cause short circuit or heating, and
v
result in fire or electric shock.
m
Do not make use of a power voltage other
than that specified
v
Stored video content and compensation
Doing so may result in fire or electric shock.
v
For discs containing important video content, backup on a
m
Do not insert or remove the plug with wet
periodic basis (once every few years) is recommended.
Although digital signals do not deteriorate, playback or
dubbing may fail due to aging of the disc resulting from the
storage conditions.
hands
v
Doing so may result in electric shock.
m
Do not touch the plug when there is thunder
v
Recorded data may be lost if power outage occurs while
or lightning
this unit is being used. It is therefore recommended that
videos stored on the HDD be dubbed to a BD or DVD as
soon as possible in case the HDD breaks down.
v
Doing so may cause electric shock.
m
Do not insert any foreign object into this unit
Doing so may result in fire or electric shock.
v
Videos or data stored on a BD/DVD, HDD, or SD card
v
cannot be recovered if the media is damaged.
m
Do not dismantle or remodel this unit
This unit consists of high-voltage components. Dismantling
v
or remodeling the unit may cause fire or electric shock.
m
Request the authorized dealer to inspect the
interior part of the unit once a year
v
Using this unit with dust accumulated inside may result in fire.
v
It is particularly effective to perform servicing before the
humid rainy season.
m
Do not connect any video cameras that are
not made by JVC to the USB terminal
v
Doing so may result in malfunction.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hard Disk Drive (HDD)
SD Cards
Hard disk drive (HDD)
The HDD rotates at a high speed whenever the power is
turned “On”.
Pay particular attention to the following precautions when
using this unit.
Precautions for handling SD and SDHC
cards
Note:
v
The disc operation display icon appears blinking and
“READING” is displayed on the display window when the SD
card is being accessed (such as during dubbing, playback, or
formatting). When access to the SD card is in progress, do not
remove the card or the power plug. Doing so may cause the
SD card to become unusable.
Warning
v
Do not subject it to vibration or strong impact
Subjecting this unit to excessive impact may result in loss of
recorded data and even damage of the HDD.
If the SD card is not usable, reformat the card. If the problem
persists even after reformatting, use a new SD card.
v
Do not remove the power plug when this unit is running
v
Do not use or store the card at a place that is subject to static
Shutting down the power when the HDD is running may result
in data loss and even damage of the HDD. Make sure that the
power plug is removed only after turning off the power.
(Wait for the “GOODBYE” message on the display window to
disappear first)
or electrical noise.
v
Inserting the SD card incorrectly may cause this unit or the
card to malfunction.
v
Our company will not be liable for any damage or loss of the
stored data due to accidents. (Be sure to back up the data.)
v
Use the card according to the prescribed conditions. Do not
use it at the following locations.
v
Places that are exposed to direct sunlight
v
Places near heat-generating equipment
v
Inside a car that is under the sun with the windows tightly
shut
v
Places that are subject to high humidity and corrosion
v
Do not bend or drop the card, or subject it to strong impact
or vibration.
v
Do not expose the card to water.
v
Do not place near devices that emit strong magnetic or
radio waves.
v
Do not touch the metal part of the card.
Memo:
v
To dispose a card after erasing all data inside, it is
recommended that this be done using a commercially
available data deletion software, or by destroying the card
physically, such as with a hammer. Formatting or deletion
of data using this unit only changes the file administration
information, and does not erase the data completely.
BD video data
You can erase BD Video data from the SD card as follows.
1
Insert the SD card which has BD video data
stored on it, into the [SD SLOT]
Memo:
v
The BD video data cannot be erased if the SD card is write-
protected. In this case, turn off the write-protect lock before
inserting the SD card.
2
Press the [MEDIA MANAGE] button on the
remote control unit
3
Select “BD-VIDEO DATA ERASE” from “SD
CARD”
The confirmation screen for erasing the BD video data is
displayed.
v
4
Select “ERASE”, and press the [OK] button
The BD video data will be erased.
v
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
m
When using DVD-RW discs
Discs
Formatting is required. Format the disc using this unit.
v
Format using “VR MODE” or “VIDEO MODE”.
BD recording formats
m
BDAV mode
v
Videos can be edited (chapter edit etc) and new videos can
be added to the disc. This format is suitable for recording
videos.
v
MPEG2 with HD quality will be recorded as it is onto the
disc. This format has low playback compatibility, but
performs well when used for backups.
m
BDMV mode
v
Compatible and playable on other BD players. Menu
functions similar to those of DVD video mode are also
included.
This format performs well for distribution purposes.
DVD recording formats
m
VR MODE
v
Format the disc using “VR MODE” if you want to add new
videos to the disc.
v
Deleting currently saved videos increases the remaining
space on the disc. (except for the case of DVD-R discs.)
m
VIDEO MODE
v
Format the disc in this mode if you want to play the disc on
a different DVD player.
Formatting of discs
Formatting is required for some disc types. Perform
formatting if this is necessary.
m
When using BD-RE or BD-R discs
Formatting is required. Format the disc using this unit.
m
When using DVD-R discs
Formatting is required depending on the disc mode to be used.
v
Formatting is required when the disc is used in “VR MODE”
. Format the disc using this unit.
v
Formatting is not required when using the disc in “VIDEO
MODE”.
Note:
v
BD-R and DVD-R discs cannot be reformatted. Check the
disc mode before formatting the disc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Discs (Continued)
Discs that enable both dubbing and
playback
Disc Type
Recording Format
Format
Finalize
Repeated Use
(Reformat)
BD-RE
BDAV mode
V
V
V
V
V
V
-
-
V
V
-
BDMV mode
BDAV mode
BDMV mode
Video mode
VR mode
-
BD-R
V
-
-
DVD-RW
DVD-R
V
V
V
V
V
V
-
Video mode
VR mode
V
-
Discs that enable playback only
Disc Type
Description
DVD-RAM (4.7 GB)
BD-ROM
Supports specific forms of playback, but no recording can be done.
Commercially available Blu-ray discs (movies, music, etc.)
The region code that can be played back on this unit is “A”.
DVD video
Music CD
Commercially available DVD-Video discs (movies, music, etc.)
The region code that can be played back on this unit is “1”. The video format used is NTSC.
CD-DA
DTS music CDs are also playable.
Memo:
v
If 8 cm discs are used, only playback can be performed. The disc cannot be used for recording or editing.
8 cm discs can be used without adapters.
v
v
DVD-RAM cartridges and BD-RE are not supported. Take the DVD-RAM out of the cartridge before using it.
Discs that are not supported
v
DVD-RAM (2.6 GB/5.2 GB)
v
DVD-R (for authoring)
v
CD-ROM/R/RW (PhotoCD, CD-G, VCD etc.)
v
DDCD (1.3 GB, Double Density CD)
v
HDCD (High Density CD)
Memo:
v
To playback a BD or DVD that was created using this unit on another player, finalize the disc.
v
There is no need for finalizing if the BD-RE disc is recorded using BDAV mode.
v
If a DVD that was recorded using VR mode has been finalized, the disc can only be played back on VR mode compatible
devices.
v
To perform high-speed dubbing, make use of a disc that supports high-speed recording.
v
This unit can play back and record only NTSC signals.
Note:
v
Do not use disc if the sticker or label is peeled off from the disc surface, if the disc is not round in shape, or if it is significantly
warped or cracked.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disc storage
Avoid storing the disc at the following locations.
Precautions on the Use of
Discs
v
v
Places that are subject to high humidity, dust, or mold
growth
v
Places that are exposed to direct sunlight or near a
heater
Maintenance of discs
Dirt attached to the disc, such as fingerprints and dust, may
v
Inside a car during summer
v
v
v
v
Do not drop the disc or subject it to strong impact.
Place the disc in a case and store it vertically.
cause distortion in the video image or sound.
Keep the disc clean at all times such as by using a soft
cloth.
Stacking the discs without using a case, placing the discs
against one another or dropping them may result in
deformation or cracking.
v
Wipe the disc lightly from the center outward using the
cloth.
v
If dirt is stubborn, wipe it off using a slightly wet cloth,
When the recording/playback lens is dirty
followed by a dry cloth.
v
Do not use thinner, benzine, alcohol, conventional record
cleaners, or antistatic sprays.
Doing so may damage the disc surface.
Dust or dirt may be attached to the recording/playback lens
after using this unit for a prolonged period of time, and
recording or playback may not be properly performed as a
result.
Although the performance of this unit varies according to the
frequency of use and installation environment, it is
recommended that cleaning of the lens be performed once
every half a year using commercially available DVD lens
cleaners.
Handling discs
m
Removing a disc
For cleaning procedures, refer to the instruction manual of the
lens cleaner.
Precautions when playing a dual disc
The side of the dual disc that is not used for DVD recording
does not comply with the standard specifications of music
CDs.
m
Keeping a disc
It is recommended that playback on this unit be limited to the
DVD recording side of the dual disc.
Use genuine JVC discs
The best performance may not be obtained for some discs.
It is recommended that genuine JVC discs be used to ensure
the best results.
m
Correct way to hold a disc
Power Cable
Do not unplug the cable during recording or playback.
Doing so may cause the disc to become unusable.
If the disc becomes unusable, refer to the following.
:
BD-R or
DVD-R
Use a new disc.
v
Make sure that your hands do not touch the recording/
playback side of the disc.
:
BD-RE or
DVD-RW
Reformat the disc after erasing the data. If the
disc is still not usable, use a new disc.
Do not turn off the [A] button or unplug the power cable
immediately after closing the disc tray.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
SDI time code display
The time code is displayed during recording of SDI input
signals.
On-screen Displays
You can specify whether to display the time code, and also
where to display it.
For details, refer to “TIME CODE INPUT SETTING” and
“TIME CODE DISPLAY POSITION” under “SDI
CONNECTION”.
Status display
Displays the current settings and operating status (such as
playback, pause) of this unit.
Pressing the [ON SCREEN] button on the remote control
displays the status. To cancel the display, press the [ON
SCREEN] button again.
You can select whether to display the statuses by changing
the settings in the settings menu.
Memo:
v
When “TIME CODE INPUT SETTING” of “SDI
CONNECTION” is set to “OFF”, the time code is not
displayed.
Memo:
v
To display the statuses, set the ON SCREEN GUIDE item
on the DISPLAY menu screen to “AUTO”.
v
Setting the DISPLAY item to “OFF” hides display of all
status information.
v
You can display the status by pressing the [OPTION]
button on the remote control unit when playback, dubbing
or editing is not in progress.
① Press the [OPTION] button on the remote control
unit
② Select “ON-SCREEN DISPLAY”, and press the [OK]
button on the remote control unit
Event display
An on-screen event display appears on the display window as
well as the monitor when there is a misoperation.
v
The event display appears for an interval of about three
seconds.
Memo:
v
The same event display may appear several times.
Alarm display
When an operation is not accepted by this unit, an on-screen
alarm display appears on the display of the main unit as well
as the monitor.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Name and Function of
Parts
Front panel
A
B
C
D
E FG H I J K L M
N
O
P
Q
R
A [ A ] button
Turn On/Off the power.
N Playback control buttons
v
[ I ] button
Plays back the data.
B Disc tray
v
[ o ] button
C [ M ] button
Opens/closes the disc tray.
Stops playback/recording.
v
[ O ] button
D Display window
Fast reverses playback.
E Remote control sensor
v
[ N ] button
F [RESET] switch
Reset the unit.
Fast forwards playback.
v
[ W ] button
Pauses playback.
G [REC MODE] button
Switches the recording mode.
O [ R ] button
Starts recording of a title.
H [HDD] lamp
Lights up when in HDD mode.
The [REC] lamp lights up while recording/importing.
P [SD SLOT]
Used for inserting SD cards.
I [INPUT SELECT] button
Switches the external input signals (SDI, HDV/DV, L-1).
Q [i.LINK(HDV/DV IN)] terminal
Connect a video camera using i.LINK (HDV/DV. IN).
J [BD] lamp
Lights up when in BD/DVD mode.
The [REC] lamp lights up while recording/dubbing.
R [USB] terminal
Connect a video camera using USB.
K [MEDIA SELECT] button
Switches between HDD and BD/SD.
L [DIRECT/MONITOR] lamp
Lights up in the MONITOR OUT mode.
M [DIRECT/MONITOR] selection button
Switches the output of the rear SDI output terminal to
“DIRECT OUT” or “MONITOR OUT”.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Name and Function of
Parts (Continued)
Display window
A
B
C
D
English messages appear for a number of operations.
(Examples)
A HDD/DISC remaining level display
B Dubbing display
:
:
:
HELLO
When the power plug is inserted
When reading the disc
C Disc status display
READING
ONSCREEN
D HDMI output display
Upon moving to the playback navigation
screen
Memo:
v
The brightness of the display window can be adjusted.
For more details, refer to “PANEL DISPLAY BRIGHTNESS”
Rear panel
A
B
C
D
E
F
G
H
I
J
K
G [SERIAL COM.(RS-232C)] terminal
For connecting to a computer using a serial cable.
A AC inlet
For connecting the power supply.
H [HDMI] terminal
For connecting using an HDMI cable.
B Cooling fan
C [SDI IN/OUT THROUGH/OUT] terminal
For connecting using a BNC cable.
I [S-VIDEO OUT/IN] terminals
For connecting using an S-video cable.
D [DIGITAL AUDIO OUT (OPTICAL)] terminal
For connecting to the amplifier using an optical audio cable.
J [COMPONENT VIDEO OUT] terminals
For connecting using a component video cable.
E [AUDIO OUT/IN] terminals
For connecting using an audio cable.
K [REMOTE IN] terminal
For connecting a wired remote control.
F [VIDEO OUT/IN] terminals
For connecting using a video cable.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
I [ J / K / H / I ]
The cursor can be moved to select an item.
Remote control
J [OPTION]
Displays the option screen.
A
T
V
K [ S ]
B
C
U
W
Move to the chapter just before the current chapter.
L [ O ]
Fast reverses the video and starts slow playback.
D
M [ R ]
Press the [ R ] and [ I ] buttons together to start recording.
X
N [REC MODE]
Y
E
For checking the recording mode settings and amount of time
remaining.
Z
b
F
G
a
c
O [ON SCREEN]
Displays information on the screen.
H
I
P [PROGRESSIVE SCAN]
Switches the resolution of the image output.
d
f
J
e
g
Q [AUDIO]
Switches the playback audio.
K
L
M
h
j
R [EDIT]
Displays the editing menu screen.
i
k
N
O
P
Q
S [MEDIA MANAGE]
Displays the media management menu screen.
l
n
p
m
o
T [ A ]
For turning On/Off the power.
R
S
U [INPUT SELECT]
Switches the external input signals (SDI, HDV/DV, L-1).
V [BD/SD]
For operating BD/DVD or SD.
W [PAGE PRV][PAGE NEXT]
Returns to the previous page. Or advances to the next page.
A [DELETE]
Deletes a title or characters.
X [ w ]
B [ M ]
Opens/closes the disc tray.
Move the playback position slightly backwards.
Y [ v ]
Advance the playback position slightly.
C [HDD]
For operating the HDD.
Z [#]
D [1]-[9]
For character input and switching between DIRECT OUT/
MONITOR OUT.
For entering characters.
E [Z]
For entering characters.
Memo:
v
During character input, it cannot be used for switching
between DIRECT OUT/MONITOR OUT.
F [RED]
Enabled when the color button (red) is displayed.
a [YELLOW]
Enabled when the color button (yellow) is displayed.
G [GREEN]
Enabled when the color button (green) is displayed.
b [BLUE]
Enabled when the color button (blue) is displayed.
H [DUBBING]
Displays the dubbing menu screen.
c [NAVIGATION]
Displays the playback navigation screen.
d [OK]
Confirms a selection or entry.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Remote control codes
Name and Function of
Parts (Continued)
e [RETURN]
Returns to the previous screen without applying the selection
or entry.
By setting a remote control code for the unit and remote
control, you can prevent two recorders from operating
simultaneously using the remote control for this unit.
(the setting for the unit and remote control at time of purchase
is “REMOTE CONTROL 3”.)
Memo:
v
f [ T ]
Changing the remote control code for the remote control
before the unit’s remote control code is changed will cause
the unit to be inoperable.
Change the unit’s remote control code first when changing
remote control codes.
Move to the next chapter.
g [ N ]
Fast forwards the video and starts slow playback.
h [ I ]
Plays the video.
m
Changing the remote control code for the
unit
i [ W ]
1
2
Press the [SET UP] button on the remote control
to display the “SETUP” menu
Pauses the video that is currently playing.
j [ o ]
Stops playback/recording.
Change the “REMOTE CONTROL CODE” option
in the “SETUP” menu
Memo:
k [MARK]
v
Adds a chapter mark during playback or recording. Select
multiple titles from the playback navigation screen or other
screens.
m
Changing the remote control code for the
remote control
Press and hold the [OPTION] button on the
remote control
l [PB MODE]
Display the playback settings screen.
1
m [ANGLE]
Switches the camera angle for playback.
2
Press either of the [1], [2], [3] or [4] buttons
Press the number button that is equivalent to the remote
control code you desire.
v
n [SET UP]
Displays the settings menu screen.
3
Press the [OK] button
Press the [OK] button to change the remote control code.
o [SUB TITLE]
Switches the playback subtitle.
v
4
Release the [OPTION] button on the remote
control
p [INFORMATION CORRECT]
Displays the information editing screen.
Memo:
v
If the remote control code is different from the unit, the
remote control code for the unit will be displayed on the
display window.
Change batteries for the remote control
If the operable distance of the remote control unit becomes
shorter, this means that the batteries are running out.
When this occurs, replace the batteries with new ones.
v
:
Examples REMOTE CONTROL 3
Batteries
v
Insert the batteries correctly according to the + and - signs.
Insert the - side of the battery first.
v
If an error occurs while using the remote control unit,
remove the batteries, wait for about five minutes, and
operate the remote control unit again after re-inserting the
batteries.
:
Battery life Approximately 6 months
(depending on the frequency of use)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Memo:
v
Connecting a Monitor
After connecting a component video cable, change the unit
setting to “COMPONENT OUTPUT”.
To display video images from this unit, connect it to a monitor.
v
This unit supports connections using “HDMI cable”,
“component video cable”, “S-video cable”, or “video cable”.
Memo:
v
Switch to the appropriate monitor input according to the
Connecting using an S-video cable
Connecting using an S-video cable (sold separately) delivers
video images that are clearer than those by a video cable.
type of connection cable used.
For details, refer to the instruction manual of the monitor.
Connecting using a HDMI cable
Connecting using a HDMI cable (sold separately) enables
signals to be maintained in the digital format, and thus
playback of clear video images.
Connecting using a video cable
Connect the output terminal of this unit to the input terminal of
a TV using the supplied video/audio cable.
(Use the supplied BNC adapter)
Memo:
v
Videos cannot be displayed on a monitor that does not
support the copyright protection system (HDCP).
v
Use a High Speed HDMI Cable.
v
After connecting using a HDMI cable, change the unit
setting to “HDMI CONNECTION”.
Connecting using a component video cable
Note:
v
Connect the S-video/video output of this unit directly to the
Connecting using a component video cable (sold separately)
delivers playback images that are clearer than those by an S-
video cable.
TV (or monitor). Connecting this unit to the TV or monitor
via a video deck triggers the copy protection function, and
may cause distortion in the video images during playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Connecting using an SDI cable (BNC)
Connect using an SDI cable (sold separately). You can
transmit both digital video and audio signals with a single
cable.
Connecting a Video Deck
or Other Equipment
Connecting a video camera
m
Connecting via the i.LINK terminal
HDD
REC
BV
REC
REC
MODE
INPUT
SELECT
MIDIA SELECT
DIRECT/
MONITOR
HDD
BD/SD
HDV/DV IN
Memo:
v
The SDI output terminal comes with two outputs, one is an
m
Connecting via the USB terminal
SDI terminal that enables switching between DIRECT OUT/
MONITOR OUT, while the other is an SDI through terminal
used exclusively for through output.
HDD
REC
BV
REC
REC
MODE
INPUT
SELECT
MIDIA SELECT
DIRECT/
MONITOR
HDD
BD/SD
Connecting an Amplifier
HDV/DV IN
Connecting an audio amplifier
m
Connecting using an optical digital cable
Memo:
v
Some video camera models may require an AC adapter
instead of batteries to run. For details, refer to the video
camera’s instruction manual.
Connecting a video deck or other
equipment (recording using this unit)
Memo:
v
Remove the protection cap of the cable before connecting.
Store the protection cap properly to prevent it from being
misplaced.
m
Connecting using an audio cable
Memo:
v
When connecting using an S-video cable, change the
setting of “VIDEO INPUT SETTING” to “S-VIDEO”.
For more details, refer to
v
To record video images played back on this unit to an
external device (video deck, etc.), connect the output
terminal of this unit to the input terminal of the external
device.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Connecting External
Devices
Connecting the Power
Supply
Connect the supplied power cable to this unit as follows.
Connecting a wired remote control
1
2
Connect the supplied power cable to the AC IN
terminal of this unit
Using a wired connection enables stable control of this unit
from an external device.
Operation is possible using any code (1 to 4) regardless of
the remote control code settings of this unit.
Connect the other end of the power cable to a
power point
3
Press the [A] button on the remote control or
this unit to switch on the unit.
The power of this unit turns on, and a “HELLO” message
appears on the display window.
Memo:
v
There is currently no compatible remote control unit
v
available.
v
To create a wired remote controller, refer to “RS-232C
Note:
v
Do not use power cables other than that supplied with this
unit. Doing so may cause this unit to malfunction.
Connecting using a RS-232C cable
External operation is enabled by connecting a RS-232C cable
to a PC or similar device.
For details on external operation, refer to “RS-232C Interface”
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
4
Select “CLOCK SET”, and press the [OK] button
The Clock Set menu screen appears.
v
Setting and Displaying
Date/Time
Set the date/time of the built-in clock as follows. The
recording date/time is stored on the disc.
5'672
%.1%-ꢂ5'6ꢄ&+52.#;
%.1%-ꢂ5'6
'ꢂ&+52.#;
/106*ꢃ&#;ꢃ;'#4
ꢀꢁ*
6+/'ꢂ&+52.#;ꢂ%*1+%'
Setting the date/time
Set the date/time of the built-in clock as follows.
1
Press the [SET UP] button on the remote control unit
The Settings menu screen appears.
v
5'.'%6
':+6
1-
4'6740
5'672
5'672
5
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
Set the time and date
Repeat the steps below to specify the time and date.
4'/16'ꢀ%10641.ꢀꢂ
v
① Press the [ J ] or [ K ] button, select the Clock Set
item, and press the [OK] button.
1((
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
5'672
%.1%-ꢀ5'6ꢁ&+52.#;
5'.'%6
':+6
1-
4'6740
%.1%-ꢀ5'6
%.1%-ꢀ5'6
5'672
;'#4
/106*ꢁ&#;
6+/'
ꢂꢃꢄꢂ
,#0ꢁꢃꢄ
#/ꢄꢂꢅꢃꢃ
2
3
Select “SETUP”, and press the [OK] button
Select “CLOCK SET/DISPLAY”, and press the
[OK] button
“CLOCK SET/DISPLAY” menu screen appears.
'06'4
v
5'.'%6
1-
':+6
5'672
4'6740
5'672
② Press the [ J ] or [ K ] button, change the setting
value, and press the [OK] button.
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
4'/16'ꢀ%10641.ꢀꢂ
1((
$7<<'4ꢀ176276
5'672
&'(#7.6ꢀ5'66+0)
%.1%-ꢀ5'6ꢁ&+52.#;
%.1%-ꢀ5'6
%.1%-ꢀ5'6
;'#4
/106*ꢁ&#;
6+/'
ꢃꢅꢂꢃ
ꢃꢅꢂꢃ
5'.'%6
':+6
,#0ꢁꢅꢂ
#/ꢂꢃꢄꢅꢅ
1-
4'6740
5'672
'06'4
5'.'%6
1-
':+6
5'672
4'6740
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
6
3
After setting is complete, select “ENTER”, and
press the [OK] button
Doing so exits date/time setting, and returns to the initial
screen.
Select “CLOCK SET/DISPLAY”, and press the
[OK] button
v
v
The Clock Set/Display menu screen appears.
5'672
5'672
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
4'/16'ꢀ%10641.ꢀꢂ
%.1%-ꢀ5'6ꢁ&+52.#;
%.1%-ꢀ5'6
%.1%-ꢀ5'6
1((
;'#4
/106*ꢁ&#;
6+/'
ꢂꢃꢄꢂ
$7<<'4ꢀ176276
,#0ꢁꢃꢄ
#/ꢄꢂꢅꢃꢃ
&'(#7.6ꢀ5'66+0)
'06'4
5'.'%6
':+6
1-
4'6740
5'672
5'.'%6
1-
':+6
5'672
4'6740
4
Select “DATE DISPLAY”, and press the [OK]
button
The Date Display menu screen appears.
Memo:
v
v
The value for seconds cannot be set. After setting the
minute, press the [SET UP] button according to the time
signal.
v
v
To cancel date/time setting, press the [RETURN] button.
Doing so cancels date/time setting and returns to the initial
screen.
5'672
%.1%-ꢂ5'6ꢄ&+52.#;
%.1%-ꢂ5'6
'ꢂ&+52.#;
/106*ꢃ&#;ꢃ;'#4
ꢀꢁ*
The year can be set from 2012 to 2037.
6+/'ꢂ&+52.#;ꢂ%*1+%'
If “2037.12.31 PM11:59” is set, the time will change to
“2012.1.1 AM12:00” after one minute.
Changing the date display style
You can specify the display style of the date as follows.
5'.'%6
':+6
1-
4'6740
5'672
1
Press the [SET UP] button on the remote control
unit
5
Select the date display style.
2
Select “SETUP”, and press the [OK] button
The Settings menu screen appears.
v
5'672
%.1%-ꢃ5'6ꢄ&+52.#;
%.1%-ꢃ5'6
;'#4ꢂ/106*ꢂ&#;
/106*ꢂ&#;ꢂ;'#4
&#;ꢂ/106*ꢂ;'#4
5'672
'ꢃ&+52.#;
/106*ꢂ&#;ꢂ
6+/'ꢃ&+52.#;ꢃ%*1+%'
ꢀꢁ*
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
4'/16'ꢀ%10641.ꢀꢂ
1((
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
5'.'%6
':+6
1-
5'672
4'6740
5'.'%6
':+6
1-
4'6740
v
Select a date display style from the following items.
5'672
:
:
:
YEAR.MONTH.DAY
Displays the date in the year/month/
day order.
MONTH.DAY.YEAR
DAY.MONTH.YEAR
Displays the date in the month/day/
year order.
Displays the date in the day/month/
year order.
6
After selecting, press the [OK] button
The date display style will be saved.
v
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
4
Select “TIME DISPLAY CHOICE”, and press the
[OK] button
The Time Display menu screen appears.
Setting and Displaying
Date/Time (Continued)
Memo:
v
v
The date display style will be applied in the following
5'672
information displays.
%.1%-ꢂ5'6ꢄ&+52.#;
%.1%-ꢂ5'6
v
Recording date of the title that is shown in the playback
'ꢂ&+52.#;
/106*ꢃ&#;ꢃ;'#4
ꢀꢁ*
navigation screen (The recording date will be shown in
place of the title if the title has not been input).
6+/'ꢂ&+52.#;ꢂ%*1+%'
v
Date that is displayed in the title information display
screen
5'.'%6
':+6
1-
4'6740
Changing the time display style
5'672
You can specify the display style of the time as follows.
5
Select the time display style
1
Press the [SET UP] button on the remote control
unit
2
Select “SETUP”, and press the [OK] button
The Settings menu screen appears.
5'672
v
%.1%-ꢂ5'6ꢄ&+52.#;
%.1%-ꢂ5'6
'ꢂ&+52.#;
/106*ꢃ&#;ꢃ
ꢀꢁ*
ꢀꢁ*
ꢁꢅ*
6+/'ꢂ&+52.#;ꢂ%*1+%'
5'672
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
4'/16'ꢀ%10641.ꢀꢂ
1((
$7<<'4ꢀ176276
5'.'%6
':+6
&'(#7.6ꢀ5'66+0)
1-
5'672
4'6740
Select from “12H” or “24H”.
5'.'%6
':+6
1-
4'6740
:
12H Displays the time in AM/PM format.
5'672
:
24H Displays the time in 24-hour format.
3
Select “CLOCK SET/DISPLAY”, and press the
[OK] button
The Clock Set/Display menu screen appears.
6
After selecting, press the [OK] button
The time display style will be saved.
v
v
Memo:
v
The time display style applies to the following.
v
v
v
Current time
5'672
Date/time registered on the disc
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
Recording time of the title that is shown in the playback
navigation screen
(The recording time will be shown in place of the title if
the title has not been input.)
4'/16'ꢀ%10641.ꢀꢂ
1((
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
v
Time of recording that is displayed in the title information
display screen
5'.'%6
':+6
1-
4'6740
5'672
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
4
Select “TIME CODE” or “DATE & TIME”
Setting the Time Code
You can add a time code while recording SDI input signals
with this unit.
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
Memo:
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
v
If recording is performed with the time code added, the time
4'%.1%-
10
1((
code will be recorded together with the video. In this case,
you cannot hide the time code display on the recorded
movie.
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+
%'06'4
6+/'ꢀ%1&'
'ꢀꢁꢀ6+/'
Setting time code input
5'.'%6
':+6
1-
4'6740
5'672
1
Press the [SET UP] button on the remote control unit
The Settings menu screen appears.
v
:
:
TIME CODE
When there are multiple time code inputs
from the SDI device, such information will
be superimposed over the SDI video input.
5'672
DATE & TIME
This unit superimposes the current date/
time over the SDI video input.
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
4'/16'ꢀ%10641.ꢀꢂ
Memo:
v
1((
Select “OFF” if you don’t want to display the time code.
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
5
Press the [OK] button after making a selection
The time code setting is saved.
Memo:
v
5'.'%6
':+6
Setting is now complete. If multiple time code inputs are
1-
4'6740
5'672
detected from the SDI signals, time code (TC**:**:**:**) is
displayed in case that “TIME CODE” is set.
Current date and time is displayed if “DATE & TIME” is set.
2
Press the [ I ] button, and select “SDI
CONNECTION”
:
Examples 2012.JAN.01 12:34:56
The “SDI CONNECTION” screen appears.
v
For more details on the “TIME CODE DISPLAY POSITION”
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
4'%.1%-
10
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+/'
%'06'4
5'.'%6
':+6
1-
4'6740
5'672
3
Press the [ J ] or the [ K ] button, select “TIME
CODE INPUT SETTING”, and press the [OK]
button
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
4'%.1%-
10
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+/'
%'06'4
5'.'%6
':+6
1-
4'6740
5'672
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
4
Press the [ J ] or the [ K ] button to select the
display position
Setting “TIME CODE DISPLAY POSITION”
1
Press the [SET UP] button on the remote control unit
The Settings menu screen appears.
v
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
5'672
4'%.1%-
10
#761ꢀ219'4ꢀꢃ1((ꢄ
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
1((
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+
%'06'4
4'/16'ꢀ%10641.ꢀꢂ
.19'4ꢀ.'(6
.19'4ꢀ4+)*6
722'4ꢀ.'(6
722'4ꢀ4+)*6
%'06'4
1((
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
5'.'%6
':+6
1-
4'6740
5'672
5'.'%6
':+6
1-
4'6740
:
:
:
5'672
LOWER LEFT
Sets the time code display position to the
bottom left.
2
LOWER
RIGHT
Sets the time code display position to the
bottom right.
Press the [ I ] button, and select “SDI
CONNECTION”
The “SDI CONNECTION” screen appears.
UPPER LEFT
Sets the time code display position to the
top left.
:
UPPER RIGHT Sets the time code display position to the
top right.
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
:
CENTER
Sets the time code display position to the
center.
4'%.1%-
10
5
Press the [OK] button after making a selection
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+/'
%'06'4
The time code display position is saved.
Memo:
v
Setting is now complete. If multiple time code inputs are not
detected from the SDI signals, time code is displayed as
“TC--:--:--:--”.
5'.'%6
':+6
1-
4'6740
5'672
v
If you have not set a date after selecting “DATE & TIME”
and completing the setting, time code will be displayed as
“--:--:--:--”.
3
Press the [ J ] or the [ K ] button, select “TIME
CODE DISPLAY POSITION”, and press the [OK]
button
v
Time code is not displayed when the monitor is connected
to the [SDI OUT THROUGH] terminal.
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
4'%.1%-
10
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+/'
%'06'4
5'.'%6
':+6
1-
4'6740
5'672
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
m
Importing data from a SDHC/SD to the HDD
Dubbing/Importing
Videos captured using a video camera can be imported to the
HDD by inserting the SDHC/SD card that the videos are
saved on.
Bi-directional dubbing between the HDD and a BD/DVD is
possible using this unit alone. Also, data can be imported to
the HDD from a video camera by connecting it via i.LINK or
USB.
m
Importing data from a video camera to the
HDD
Videos captured using a video camera can be imported to the
HDD.
This unit supports video camera connections via i.LINK and
USB.
Dubbing from the HDD to a BD/DVD
m
High-speed dubbing
Select this option if you want to significantly shorten the time
required for dubbing. Make use of a BD/DVD disc that
supports high-speed recording.
Memo:
v
For MOV format videos, only videos in MOV format (SP
mode and HQ mode) taken using JVC ProHD camcorder
GY-HM700/100 are compatible. There is no guarantee for
importing videos taken on devices by other company.
m
Dubbing in a specific recording mode
Select this option when you want to specify the recording
mode for dubbing. Dubbing can be performed in the recording
mode of your preference, such as whether to “maintain a high
picture quality” or “save as many titles as possible”.
HDD
DR
Video Camera
USB/SDHC/SD
MOV*
Deterioration-free
dubbing
DR
(MOV*)
Memo:
Encode dubbing
v
The image quality will not improve even when a recording
mode with image quality higher than that of the original
recording mode is chosen.
SD-VIDEO(HD)*
DR
HDV/DV
HDV
v
Dubbing using a specific recording mode will cause the disc
to be re-encoded.
AF/AN/AL/AE
AVCHD
SD-VIDEO(SD)*
AVC
FR
DV
Other options for importing data into the
HDD
L1 terminal
m
Importing data from a BD/DVD to the HDD
VIDEO
S-VIDEO
/
XP/SP/LP/EP
JPEG
You can import titles from a BD/DVD.
JPEG
BD/DVD
HDD
DR
.
BD
BDMV
:
:
MOV*
MOV files that are taken in SP mode and
HQ mode using the JVC ProHD
Camcorder GY-HM700/100
BDAV
AF/AN/AL/AE
DVD
SD-VIDEO(HD)* SD-VIDEO(JVC Everio MPEG2 TS)
EverioBackup *
:
SD-VIDEO(SD)* SD-VIDEO(JVC Everio MPEG2 PS)
AVC
FR
m
Importing data from a video deck
AVCHD
DVD-VR
You can import data to the HDD from an external video deck
by connecting it to a composite video or S input terminal.
XP/SP/LP/EP
JPEG
DVD-Video *
Deterioration-free
dubbing
EverioBackup
(JPEG)
Memo:
v
Videos that are copy-controlled cannot be imported.
Encode dubbing
v
Motion JPEG is not supported
BD
BDAV
(BD-RE, JPEG)
:
DVD-video*
Discs that are not finalized cannot be
imported.
:
EverioBackup* Data disc containing high-definition videos
that are recorded in the MPEG2 format
using a DVD writer for Everio.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Dubbing chart
m
Dubbing the video data from the HDD
Dubbing
Quality
Format (BD)
Format (DVD)
DVD-VIDEO
Content
Quality
BDMV(HD Quality) BDAV(HD Quality) BDAV(SD Quality)
DVD-VR
DR (MOV*)
DR (Other)
AF/AN/AL/AE
AVC
High-speed dubbing High-speed dubbing / Re-encoding
Re-encoding
Re-encoding
Re-encoding
Re-encoding
Re-encoding
Re-encoding
-
High-speed dubbing / Re-encoding
Re-encoding
Re-encoding
Re-encoding
Re-encoding
High-speed dubbing High-speed dubbing / Re-encoding
Re-encoding
High-speed dubbing High-speed dubbing / Re-encoding
Re-encoding
FR
-
-
Re-encoding
High-speed dubbing / Re-encoding
Re-encoding
XP/SP/LP/EP*
-
-
Re-encoding
High-speed dubbing / High-speed dubbing /
Re-encoding
Re-encoding
Memo:
:
EP*
High-speed dubbing to DVD-VIDEO format discs in EP mode title
To perform high-speed dubbing of a EP mode title to a DVD-VIDEO format disc, set “HIGH-SPEED DUBBING” (A
dubbing a title that is recorded or imported with a setting other than “4:3”.
:
MOV*
MOV files that are taken in SP mode and HQ mode using the JVC ProHD Camcorder GY-HM700/100
m
Dubbing the picture data from the HDD
Importing file
(HDD)
Media
BDAV(BD-RE) SDHC/SD
JPEG
V
V
Memo:
v
Video images may be distorted in the following situations during reencoding/dubbing when the monitor (TV) is connected to
this unit using a HDMI cable, or when the screen resolution is set to 1080p.
v
Proceeding with dubbing from the menu screen
v
Returning to the normal screen after dubbing has finished
v
This is not a malfunction. Change the screen resolution to a setting other than 1080p if you feel that this is annoying.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Formatting a disc
Formatting
1
Set the DVD or BD to be formatted on the disc
tray
Unused discs or SD cards may require formatting in some
cases.
2
Press the [MEDIA MANAGE] button on the
remote control unit
The Media Management menu screen appears.
When the need arises, format the disc or SD card
accordingly.
v
Memo:
v
Formatting a disc or SD card erases all existing data from
the media.
/'&+#ꢀ/#0#)'/'06
Double-check carefully before formatting so as not to erase
important titles.
$&ꢁ&8&
(14/#6
v
When using a DVD-R disc in the Video mode, formatting is
(+0#.+<'
4'0#/'ꢀ&+5%
5&ꢀ%#4&
not required.
(14/#6
Format chart
$&ꢂ8+&'1ꢀ#ꢀ'4#5'
*&&
Refer to the following chart for the disc types and format
when formatting a disc.
(14/#6
Note:
v
If a disc is formatted using an equipment not manufactured
by JVC, the disc may not be read correctly even though it
corresponds to the chart below.
In this case, reformat the disc using this unit, or make use
of another blank disc.
3
DVD
BD
Select “FORMAT” from “BD/DVD”
:
A format selection screen appears.
:
A confirmation screen to execute formatting
appears.
Memo:
v
4
Select a format mode from the format selection
screen
BD-R and DVD-R discs can only be formatted once.
v
When a disc is re-formatted into another format, remove
the disc and load it again.
m
DVD format chart
Format
VR
Video
Format
Format
%10(+4/
6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ(14/#66'&
5'.'%6ꢀ#ꢀ(14/#6ꢀ/1&'
DVD-RW Single-sided, single
layer (4.7 GB)
V
V
V
V
84ꢀ/1&'
8+&'1ꢀ/1&'
DVD-R
Single-sided, single
layer (4.7 GB)
V(*)
V (*)
Single-sided, dual layer
(8.5 GB)
:
DVD-RW Select a “Format mode” from “VR MODE” or
“VIDEO MODE”.
:
:
V
Format supported.
*
Formatting not required.
Memo:
m
BD format chart
v
This screen does not appear when a BD or DVD-R disc is
used.
Format
BD-RE Single-sided, single layer (25 GB)
Single-sided, dual layer (50 GB)
V
V
V
V
BD-R
Single-sided, single layer (25 GB)
Single-sided, dual layer (50 GB)
:
V
Format supported.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
m
Cancel formatting
Formatting (Continued)
1
Press the [OPTION] button while formatting
5
Select “YES”, and press the [OK] button in the
format confirmation screen
126+105
$#%-
5612
%10(+4/
6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ(14/#66'&ꢀ+0ꢀ:::
#..ꢀ4'%14&'&ꢀ6+6.'5ꢀ9+..ꢀ$'ꢀ'4#5'&
+6ꢀ6#-'5ꢀ#$176ꢀ;;;ꢀ/+076'5
&1ꢀ;17ꢀ9#06ꢀ61ꢀ(14/#6!
;'5
01
(14/#6
;17ꢃ%#0ꢃ':+6ꢃ(41/ꢃ6*'ꢃ126+10ꢃ5%4''0
2
Select “STOP” and press the [OK] button
A confirmation screen to stop formatting appears.
v
v
v
Formatting starts.
3
Select “YES” on the confirmation screen and
press the [OK] button
After formatting is complete, a “THE DISC HAS BEEN
FORMATTED” message appears on the monitor, and the
normal screen is displayed.
%10(+4/
(14/#66+0)ꢂ9+..ꢂ$'ꢂ56122'&
5612!
%10(+4/
;'5
01
6*'ꢀ&+5%ꢀ*#5ꢀ$''0ꢀ(14/#66'&
1-
(14/#6
ꢀꢀꢁ
;17ꢂ%#0ꢂ':+6ꢂ(41/ꢂ6*'ꢂ126+10ꢂ5%4''0
v
Formatting is stopped.
Note:
Memo:
v
v
Formatting can be stopped if it seems to take a long time
To return to the initial screen without formatting the disc,
(more than two minutes).
select “DO NOT FORMAT” and press the [OK] button.
Alternatively, you can press the [RETURN] button to return
to the initial screen without formatting.
v
If for any reason formatting cannot be stopped, the
confirmation screen for stopping formatting will not appear
even if the [OPTION] button is pressed.
Note:
v
Do not turn off the power or unplug the power cable when
the “FORMATTING DISC…” message is displayed.
v
Note that formatting a disc with copyright-protected titles
erases all the titles from the disc.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
4
Select “YES”, and press the [OK] button
Formatting an SD Card
1
Insert the SD card to be formatted into the [SD
SLOT]
With the terminal side facing down, insert the SD card until
a “click” sound is heard.
v
%10(+4/
6*'ꢀ%#4&̉5ꢀ%106'06ꢀ9+..ꢀ$'ꢀ'4#5'&ꢀꢁ
&1ꢀ;17ꢀ9#06ꢀ61ꢀ56#46ꢀ(14/#66'&ꢀ!
;'5
01
v
v
Formatting starts.
Note:
After formatting is complete, a “THE SD CARD HAS BEEN
FORMATTED” message appears on the monitor, and the
normal screen is displayed.
v
Formatting cannot be performed if the SD card is write-
protected. In this case, turn off the write-protect lock before
inserting the SD card.
Memo:
v
2
To return to the initial screen without formatting the disc,
select “NO” and press the [OK] button.
Alternatively, you can press the [RETURN] button to return
to the initial screen without formatting.
Press the [MEDIA MANAGE] button on the
remote control unit
The Media Management menu screen appears.
v
Note:
v
Do not turn off the power or unplug the power cable when
the “FORMATTING SD CARD…” message is displayed. Do
not remove the SD card as well. Doing so may damage the
SD card.
/'&+#ꢀ/#0#)'/'06
$&ꢁ&8&
(14/#6
(+0#.+<'
4'0#/'ꢀ&+5%
5&ꢀ%#4&
v
v
Note that formatting a disc with copyright-protected titles
erases all the titles from the disc.
(14/#6
Once the formatting of the SD card begins, it cannot be
stopped.
$&ꢂ8+&'1ꢀ#ꢀ'4#5'
*&&
(14/#6
3
Select “FORMAT” from “SD CARD”
A confirmation screen to execute formatting appears.
v
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Recording Modes
Maximum recording time for each recording mode
You can specify a recording mode according to the intended use. Setting the video to a high picture quality shortens the
maximum recording time, while setting to a lower picture quality lengthens the recording time.
Refer to the following table for the maximum recording time in the respective modes. All figures shown in the table are
approximate values.
Recording
Mode
Quality
BD (Single-
sided, Single
Layer)
BD (Single-
sided, Dual
Layer)
DVD (Single-
sided, Single
Layer)
DVD (Single-
sided, Dual
Layer)
HDD (500 GB)
DR
AF
HD
1.9 hours
4 hours
3.8 hours
8 hours
-
-
40 hours (*1)
80 hours
-
-
AN
6 hours
12 hours
18 hours
24 hours
10.5 hours
21 hours
42 hours
84 hours
3.6 hours
4 hours
-
-
126 hours
189 hours
252 hours
110 hours
222 hours
442 hours
887 hours
38 hours
AL
9 hours
-
-
AE
12 hours
5.25 hours
10.5 hours
21 hours
42 hours
1.8 hours
2 hours
-
-
XP
SD
HD
1 hours
1.7 hours
SP
2 hours
3.5 hours
LP
4 hours
7.1 hours
EP
8 hours
14.3 hours
DR1
DR2
DR3
DR4
-
-
-
-
-
-
-
-
42 hours
2.9 hours
3.9 hours
6 hours
62 hours
7.8 hours
82 hours
:
*1
An estimated figure when HDV is imported.
Memo:
v
DR mode
Abbreviation for Direct Recording. Videos are recorded in the original picture quality.
AF/AN/XP/SP mode
v
Recommended for recording images with fast motion, such as sports videos.
v
The AF/AN mode record images at the high-quality HD level.
v
The XP/SP modes record images at the high-quality SD level.
v
AL/AE/LP mode
Recommended for recording images with slow motion and little contrast, such as dramas.
v
AL/AE mode records images at the low-quality HD level.
v
LP mode records images at the low-quality SD level.
v
EP mode
Recommended for recording images with sharp outlines, such as animation videos, and when the recordable time (remaining
time) is limited.
v
DR1/DR2/DR3/DR4 mode
Selection is enabled only when you are importing HD movies from the SDI input terminal.
Select DR1 to record in the finest image quality, and DR4 for the lowest quality. The recordable duration is longest in the DR4
quality, and shortest in the DR1 setting.
v
Setting the DR1/DR2/DR3/DR4 recording mode
If the recording mode is changed to the DR1/DR2/DR3/DR4, it may take a little while to process the setting. In the meantime,
input signals may not be displayed.
v
You can change the recording mode by pressing the [OPTION] button on the remote control unit while playback, dubbing or
editing is not in progress.
① Press the [OPTION] button on the remote control unit
② Select “RECORDING MODE”, and press the [OK] button on the remote control unit
③ Select “RECORDING MODE” to which you want to change, and press the [OK] button on the remote control unit
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
HD picture quality
v
Using BD enables dubbing to be done with HD picture
quality. To dub HD picture quality titles that are imported in
the HDD, use BD.
Note:
v
Dubbing to a DVD cannot be done in HD picture quality.
DR mode
v
HDV, MOV* and SD-VIDEO(JVC Everio MPEG2 TS) titles
are imported using DR mode.
:
MOV*
MOV files that are taken in SP mode and HQ mode
using the JVC ProHD Camcorder GY-HM700/100
FR mode
FR mode is displayed as the recording mode in the following
cases.
v
FR mode during import into HDD
During import of SD-VIDEO (JVC Everio MPEG2 PS) titles
via high-speed dubbing. During import of data via high-
speed dubbing from DVD-VR discs recorded using other
units.
v
FR mode during dubbing from HDD
When selecting the most appropriate mode automatically
between XP and EP according to the remaining memory on
the disc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Full import
Importing Data from a BD/
DVD to the HDD
1
Select “FULL IMPORT” in the import selection
screen, and press the [OK] button
v
A check mark is added to the “FULL IMPORT” item.
Data can be imported from a BD/DVD to the HDD as follows.
v
File formats that can be imported
2
Select “NEXT”, and press the [OK] button
:
Videos
BD-MV, BD-AV, AVCHD, DVD-VR, DVD-
VIDEO, EverioBackup
&7$$+0)
56'2
:
Still Images EverioBackup, BD-AV(BD-RE)
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
Memo:
&+5%
*&&
v
Titles that are imported using “FULL IMPORT” combined
into one title.
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
This unit does not support combining of titles during the
editing operation after import is complete. To combine and
import data, select “FULL IMPORT”.
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
v
v
For data that is selected for import via “SEL.
TITLE(VIDEO)”, titles with the same date are combined.
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
Titles of two or more scenes cannot be combined if the
recording criteria, such as video size, are different.
v
“START” will appear instead of “NEXT” in the menu if the
disc is of a format other than “BD-AV”. In this case, go to
Step 5.
Note:
v
Only titles that are not copyright-protected can be imported.
v
Recognizing the device and importing the files may take a
long time depending on the amount of files in the device.
3
Select “RECORDING MODE”, and press the [OK]
button
A pop-up menu appears.
m
Preparations
v
1
2
Set a BD or DVD on the disc tray
4
Select the “RECORDING MODE” option
Press the [DUBBING] button on the remote
control unit
The importing screen appears.
&7$$+0)
56'2
v
5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'
&7$$+0)
56'2
&+5%
*&&
52
5'.'%6ꢁ+/2146ꢀ&7$$+0)
4'%14&+0)ꢀ/1&'
61ꢁ*&&
75$
61ꢁ&8&
&+5%
*&&
*&&
*&&
*&&
8+&'1
5&
&+5%ꢀ5&
2+%674'
%#0%'.
$#%-
56#46
&+5%
*&8ꢀ&8
&+5%ꢁ%12;
&+5%
5'.'%6
126+10
1-
':+6
&+5%
&7$$+0)
4'6740
%#0%'.
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
3
Select “DISChHDD” in the importing screen, and
press the [OK] button
A check mark is added to the “DISChHDD” item.
v
4
Select “NEXT”, and press the [OK] button
The import selection screen appears.
v
Memo:
v
A recording mode selection appears instead of the import
selection screen when DVD-VIDEO is detected.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
3
Select “RECORDING MODE”, and press the [OK]
button
A pop-up menu appears.
5
Select “START”, and press the [OK] button
Importing of the titles starts.
v
v
v
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
&7$$+0)
56'2
5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'
&+5%
*&&
52
%10(+4/
4'%14&+0)ꢀ/1&'
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
4
Select the “RECORDING MODE” option.
Specify a title
5
Select “NEXT”, and press the [OK] button
A screen for creating the import title list appears.
v
1
Select “SEL. TITLE(VIDEO)” in the import
selection screen, and press the [OK] button
6
Create an import title list
Follow the steps below to create an import title list.
v
A check mark is added to the “SEL. TITLE(VIDEO)” item.
v
2
Select “NEXT”, and press the [OK] button
① Select “ADD TITLE LIST FOR DUBBING”, and press
the [OK] button
The Title List screen is displayed.
&7$$+0)
56'2
② Select the titles to import, and press the [OK] button
Titles selected are added to the list.
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
&+5%
*&&
Memo:
v
Press the [MARK] button. A check mark will appear beside
the title.
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
All titles with a check mark can be added to the list at the
same time.
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
v
Select a title from the dubbing title list, and press the [OK]
button to perform the following changes.
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
v
Delete the selected title from the list
&7$$+0)
4'6740
v
Thumbnails may not be displayed during title selection
depending on the discs used.
v
v
If a “BD-AV” disc is set, a recording mode selection screen
will appear.
If the disc is of a format other than “BD-AV”, a screen for
creating an import title list will appear. Go to step 5.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
1
Select “RECORDING MODE”, press the [OK]
button, and select “RECORDING MODE” from
the recording mode selection screen
Importing Data from a BD/
DVD to the HDD
v
Select the “RECORDING MODE” option.
(Continued)
&7$$+0)
56'2
7
Select “START”, and press the [OK] button
5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'
&7$$+0)
56'2
&+5%
*&&
52
2.'#5'ꢂ%4'#6'ꢂ#ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ+/2146
&+5%
*&&
4'%14&+0)ꢀ/1&'
#$%
5RQTVUꢀꢀ
%QQMKPIꢁꢁꢁ
-+&5ꢂ914.&
0GYUꢂ###
4GRQTV
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
(.19'4ꢂ.'5510ꢂꢃ
&7$$+0)
4'6740
#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)
$#%-
%#0%'.
56#46
5'.'%6
1-
':+6
&7$$+0)
126+10
4'6740
2
Select “START”, and press the [OK] button
Importing of the titles starts.
v
v
v
Importing of titles starts according to the sequence in the
created title list.
v
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
1-
Memo:
v
If the first play setting of the DVD-video has been set to top
Note:
menu or other settings, the title will not playback.
If playback does not start, press the play button or playback
the DVD-Video.
v
“START” cannot be selected for the following cases.
v
v
v
A title that cannot be dubbed has been selected
HDD memory is insufficient
The amount of titles in the HDD has reached the
maximum amount
Canceling importing
v
A dubbing title list has not been created
m
To cancel importing before it starts
Select “CANCEL” from the menu, and press the [OK]
v
button to cancel importing of a title.
Importing DVD-VIDEO
When DVD-VIDEO is detected, a recording mode selection
screen appears.
v
Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
Follow the steps below to import DVD-VIDEO to the HDD.
m
To cancel importing while it is in progress
Press the [OPTION] button to display the pop-up menu.
v
Select “CANCEL” from the pop-up menu and press the
[OK] button. Data will be written onto the disc up to the
point where import is cancelled.
v
Importing will also be stopped when the [o] button is
pressed to stop playback.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
m
Preparations
Importing Data from a USB-
compatible Device to the
HDD
1
Connect the USB device (Everio, etc.) to this unit
using a USB cable
Data on devices connected to the USB terminal can be
imported to the HDD as follows.
HDD
REC
BV
REC
REC
MODE
INPUT
SELECT
MIDIA SELECT
DIRECT/
MONITOR
HDD
BD/SD
v
File formats that can be imported
HDV/DV IN
AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*,
and JPEG
:
MOV*
MOV files that are taken in SP mode and HQ
mode using the JVC ProHD Camcorder GY-
HM700/100
Memo:
v
Titles that are imported using “FULL IMPORT” combined
into one title. This unit does not support combining of titles
during the editing operation after import is complete. To
combine and import data, select “FULL IMPORT”.
Memo:
v
After connecting the USB cable, turn on the camera and
switch the mode of the camera.
(Choose “Connect to a computer” or a similar option. For
details refer to the camera’s instruction manual.)
“USB RDY” appears on the display window of the unit when
an USB device is recognized.
v
v
v
For data that is selected for import via “SEL.
TITLE(VIDEO)”, titles with the same date are combined.
v
Titles of two or more scenes cannot be combined if the
recording criteria, such as video size, are different.
2
Press the [DUBBING] button on the remote
control unit
The importing screen appears.
Import of MOV files recorded using JVC GY-HM700/100
SP mode 1080i (25 Mbps) requires a duration that is about
1.3 times longer than the usual time.
v
&7$$+0)
56'2
Note:
v
5'.'%6ꢁ+/2146ꢀ&7$$+0)
Turn off the power for this unit and the connecting device if
an USB compatible device is to be connected to this unit.
Do not unplug the USB cable while importing a title.
Doing so may result in loss or damage of the titles.
61ꢁ*&&
75$
61ꢁ&8&
&+5%
v
*&&
*&&
*&&
*&&
8+&'1
5&
&+5%ꢀ5&
2+%674'
v
v
Only titles that are not copyright-protected can be imported.
&+5%
*&8ꢀ&8
&+5%ꢁ%12;
&+5%
For MOV format videos, only videos in MOV format (SP
mode and HQ mode) taken using JVC ProHD camcorder
GY-HM700/100 are compatible. There is no guarantee for
importing videos taken on devices by other company.
Recognizing the device and importing the files may take a
long time depending on the amount of files in the USB
device.
If a USB connection is used, this unit will only recognize one
device out of all the recording devices.
Depending on the video camera, the memory card slot will be
recognized but the internal device will not be recognized.
Use the following methods to solve this.
&+5%
%#0%'.
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
v
v
3
Select “USBhHDD” in the importing screen, and
press the [OK] button
A check mark is added to the “USBhHDD” item.
v
4
Select “NEXT”, and press the [OK] button
The import selection screen appears.
v
v
If the internal device is not recognized:
Copy the data from the camera’s internal memory or
HDD onto the SD card.
Full import
1
v
If using a JVC camcorder that has two memory card
slots:
Select “FULL IMPORT” in the import selection
screen, and press the [OK] button
A check mark is added to the “FULL IMPORT” item.
Put the memory card that has the required data in slot A.
v
If the target device is not recognized using the USB
connection, use the camcorder’s burner or a similar device
to dub the disc before proceeding with dubbing on this unit.
v
2
Select “START”, and press the [OK] button
&7$$+0)
56'2
v
When importing videos from a USB-connected camcorder,
data reading from the internal memory of the camcorder
may fail. If both the camcorder’s internal memory and SD
card are available, the SD card may be detected first. To
prevent this from occurring, remove the SD card before
reading data from the internal memory.
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
75$
*&&
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
4
Select “START”, and press the [OK] button
Importing Data from a USB-
compatible Device to the
HDD (Continued)
&7$$+0)
56'2
2.'#5'ꢄ%4'#6'ꢄ#ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ+/2146
75$
*&&
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢆꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢁꢁ
v
Importing of the titles starts.
v
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
#&&ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ&7$$+0)
$#%-
%#0%'.
56#46
5'.'%6
1-
':+6
&7$$+0)
126+10
4'6740
%10(+4/
v
v
Importing of titles starts according to the sequence in the
created title list.
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
Specify a title
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1
Select “SEL. TITLE(VIDEO)” in the import
selection screen, and press the [OK] button
1-
v
A check mark is added to the “SEL. TITLE(VIDEO)” item.
2
Select “NEXT”, and press the [OK] button
&7$$+0)
56'2
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
Note:
v
“START” cannot be selected for the following cases.
75$
*&&
v
v
v
A title that cannot be dubbed has been selected
HDD memory is insufficient
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
The amount of titles in the HDD has reached the
maximum amount
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
v
A dubbing title list has not been created
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
Canceling importing
v
A screen for creating the import title list appears.
m
To cancel importing before it starts
Select “CANCEL” from the menu, and press the [OK]
3
Create an import title list
Follow the steps below to create an import title list.
v
v
button to cancel importing of a title.
v
① Select “ADD TITLE LIST FOR DUBBING”, and press
the [OK] button
The Title List screen is displayed.
② Select the titles to import, and press the [OK] button
Titles selected are added to the list.
Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
m
To cancel importing while it is in progress
Press the [OPTION] button. Select “CANCEL” from the
v
Cancel Importing menu, and press the [OK] button. Doing
so imports data to the HDD up to the position where you
have chosen to stop.
Memo:
v
Press the [MARK] button. A check mark will appear beside the
title.
All titles with a check mark can be added to the list at the
same time.
v
v
You can perform the following editing operations by selecting a
title from the dubbing title list and pressing the [OK] button.
v
Delete the selected title from the list
Thumbnails will not be displayed when a title is selected.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
3
Select “SDhHDD” in the importing screen, and
press the [OK] button
A check mark is added to the “SDhHDD” item.
Importing Data from an SD
Card to the HDD
v
4
Select “NEXT”, and press the [OK] button
The import selection screen appears.
Data can be imported from a SD (SDHC) card to the HDD as follows.
v
v
File formats that can be imported
AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*,
and JPEG
Full import
:
MOV*
MOV files that are taken in SP mode and HQ
mode using the JVC ProHD Camcorder GY-
HM700/100
1
Select “FULL IMPORT” in the import selection
screen, and press the [OK] button
A check mark is added to the “FULL IMPORT” item.
v
Memo:
v
2
Select “START”, and press the [OK] button
Titles that are imported using “FULL IMPORT” combined
into one title. This unit does not support combining of titles
during the editing operation after import is complete. To
combine and import data, select “FULL IMPORT”.
&7$$+0)
56'2
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
v
v
v
For data that is selected for import via “SEL.
TITLE(VIDEO)”, titles with the same date are combined.
5&
*&&
Titles of two or more scenes cannot be combined if the
recording criteria, such as video size, are different.
Import of MOV files recorded using JVC GY-HM700/100
SP mode 1080i (25 Mbps) requires a duration that is about
1.3 times longer than the usual time.
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
Note:
%#0%'.
$#%-
56#46
v
Do not remove the SD card when importing of the titles is in
5'.'%6
126+10
1-
':+6
progress or when the importing screen is displayed.
Doing so may result in loss or damage of the titles.
&7$$+0)
4'6740
v
For MOV format videos, only videos in MOV format (SP
mode and HQ mode) taken using JVC ProHD camcorder
GY-HM700/100 are compatible. There is no guarantee for
importing videos taken on devices by other company.
v
v
Importing of the titles starts.
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
v
Only titles that are not copyright-protected can be imported.
m
Preparations
1
Insert the SD (SDHC) card into the [SD SLOT]
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
Memo:
v
Memo:
“SD RDY” appears on the display window of the unit when
v
Choose “BACK” from the menu and press the [OK] button
to return to the previous screen.
an SD card is recognized.
2
Press the [DUBBING] button on the remote
control unit
The importing screen appears.
v
&7$$+0)
56'2
5'.'%6ꢁ+/2146ꢀ&7$$+0)
61ꢁ*&&
75$
61ꢁ&8&
&+5%
*&&
*&&
*&&
*&&
8+&'1
5&
&+5%ꢀ5&
2+%674'
&+5%
*&8ꢀ&8
&+5%ꢁ%12;
&+5%
&+5%
%#0%'.
0':6
5'.'%6
':+6
1-
&7$$+0)
126+10
4'6740
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Importing Data from an SD
Card to the HDD
&7$$+0)
56'2
2.'#5'ꢄ%4'#6'ꢄ#ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ+/2146
5&
*&&
(Continued)
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢆꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢁꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢈꢁ
ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢁꢁ
Specify a title
1
Select “SEL. TITLE(VIDEO)” in the import
selection screen, and press the [OK] button
#&&ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ&7$$+0)
$#%-
%#0%'.
56#46
v
A check mark is added to the “SEL. TITLE(VIDEO)” item.
5'.'%6
1-
':+6
&7$$+0)
126+10
4'6740
2
Select “NEXT”, and press the [OK] button
v
v
Importing of titles starts according to the sequence in the
created title list.
&7$$+0)
56'2
5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
5&
*&&
(7..ꢀ+/2146
5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ
5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ
%10(+4/
%#0%'.
$#%-
0':6
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
5'.'%6
126+10
':+6
1-
&7$$+0)
4'6740
1-
v
A screen for creating the import title list appears.
3
Create an import title list
Follow the steps below to create an import title list.
v
① Select “ADD TITLE LIST FOR DUBBING”, and press
the [OK] button
The Title List screen is displayed.
Memo:
v
Choose “BACK” from the menu and press the [OK] button
to return to the previous screen.
② Select the titles to import, and press the [OK] button
Titles selected are added to the list.
Note:
v
Memo:
“START” cannot be selected for the following cases.
v
Press the [MARK] button. A check mark will appear beside
v
v
v
A title that cannot be dubbed has been selected
HDD memory is insufficient
the title.
All titles with a check mark can be added to the list at the
same time.
The amount of titles in the HDD has reached the
maximum amount
v
You can perform the following editing operations by
selecting a title from the dubbing title list and pressing the
[OK] button.
v
A dubbing title list has not been created
v
Thumbnails will not be displayed when a title is selected.
v
Delete the selected title from the list
v
When there are files of different formats (AVCHD, SD-
VIDEO, MOV*) in the SD card, press the [RED] button to
select the format you want to display.
Canceling importing
m
To cancel importing before it starts
Select “CANCEL” from the menu, and press the [OK]
v
:
MOV*
MOV files that are taken in SP mode and HQ
mode using the JVC ProHD Camcorder GY-
HM700/100
button to cancel importing of a title.
v
Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
4
Select “START”, and press the [OK] button
m
To cancel importing while it is in progress
v
Press the [OPTION] button. Select “CANCEL” from the
Cancel Importing menu, and press the [OK] button. Doing
so imports data to the HDD up to the position where you
have chosen to stop.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Memo:
v
Importing Data from an
i.LINK-compatible Device to
the HDD
After the device (camera, etc.) has been connected using
an i.Link cable, turn on the power of the device and switch
it to playback mode. (refer to the device’s (camera, etc.)
instruction manual for more details.)
v
“HDV/DV RDY” appears on the display window of the unit
when an iLINK device is recognized.
Data on devices connected to the i.LINK terminal can be
imported to the HDD as follows.
2
v
Press the [DUBBING] button on the remote
control unit
The importing screen appears.
Video formats that can be imported:
DV and HDV content
v
Memo:
v
Only titles that are not copyright-protected can be imported.
Devices that have in-built copyright protection such as D-VHS and digital
tuners cannot be connected. This unit only allows import from tape media.
Importing will not be performed if no tape has been inserted
into the HDV/DV camera.
Importing will be cancelled when the mode is changed from
HDV to DV or vice versa.
For camcorders that support both HDV and DV recording, use
only one of the modes for recording and playback.
There is no support for editing using a connected PC.
Only one i.LINK device can be connected to this unit at a time.
v
&7$$+0)
56'2
5'.'%6ꢁ+/2146ꢀ&7$$+0)
v
61ꢁ*&&
75$
61ꢁ&8&
&+5%
v
*&&
*&&
*&&
*&&
8+&'1
5&
&+5%ꢀ5&
2+%674'
v
&+5%
*&8ꢀ&8
&+5%ꢁ%12;
&+5%
v
&+5%
v
%#0%'.
0':6
Note:
5'.'%6
126+10
v
1-
':+6
Turn off the power for this unit and the connecting device
when connecting using an i.LINK compatible device.
Do not unplug the i.LINK cable while importing to the HDD is in progress.
Doing so may result in loss or damage of the titles.
&7$$+0)
4'6740
v
3
Select “HDV/DVhHDD” in the importing screen,
and press the [OK] button
A check mark is added to the “HDV/DVhHDD” item.
v
For example, during full import of HDV content from JVC GY-
HD100 via i.LINK connection, the beginning of the image may
not be captured if GY-HD100 is not set as follows.
(1) Set the [IEEE1394] switch at the rear of the GY-HD100
unit to [HDV] or [DV] according to the recorded content.
(2) Set [MENU]/[VIDEO FORMAT]/[PB TAPE] on the GY-
HD100 unit to [HDV] or [DV].
v
4
Select “NEXT”, and press the [OK] button
The import selection screen appears.
v
(As with (1), set according to the recorded content. Setting to
[AUTO] is not allowed.)
Imports data from the beginning
You can import videos from the beginning till the end as
follows. If the current position is halfway through the tape,
import after rewinding the tape to the beginning.
(3) Check to ensure that the [HDV] or [DV] lamp on the side of
the GY-HD100 unit is lit.
(Check to ensure that the lamp that is lit corresponds to the
setting in (1) and (2).)
When importing from a tape that contains data captured in the
HDV recording and DV recording modes, change the video
camera setting according to each recording mode, check to
ensure that the corresponding lamp in (3) is lit, and choose to
start import from the current position.
1
Select “IMPORT FROM BEGINNING”, and press
the [OK] button
A check mark is added to the “IMPORT FROM
BEGINNING” item.
v
m
2
Preparations
Select “NEXT”, and press the [OK] button
1
Connect the device (camera, etc.) to this unit
using an i.LINK cable
&7$$+0)
56'2
5'.'%6ꢁ6*'ꢁ/'6*1&ꢁ1(ꢁ+/2146
*&8ꢀ&8
*&&
HDD
REC
BV
REC
REC
MODE
INPUT
SELECT
MIDIA SELECT
DIRECT/
MONITOR
HDD
BD/SD
+/2146ꢁ(41/ꢁ$')+00+0)
+/2146ꢁ(41/ꢁ%744'06ꢁ215+6+10
HDV/DV IN
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
4'6740
':+6
&7$$+0)
v
A recording mode selection screen appears.
3
Select “RECORDING MODE”, press the [OK]
button, and select from the pop-up menu
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
3
Select “RECORDING MODE” and press the [OK]
button to display the pop-up menu
Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING
MODE” option.
Importing Data from an
i.LINK-compatible Device to
the HDD (Continued)
v
&7$$+0)
56'2
v
Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING
5'6ꢁ6*'ꢁ4'%14&+0)ꢁ/1&'
MODE” option.
*&8ꢀ&8
*&&
52
&7$$+0)
56'2
5'6ꢁ6*'ꢁ4'%14&+0)ꢁ/1&'
4'%14&+0)ꢁ/1&'
*&8ꢀ&8
*&&
52
&7$$+0)ꢁ(14ꢁ*&8ꢁ6#2'ꢁ%106'065ꢁꢂꢂ ꢁ&4ꢁ/1&'ꢃꢁ&8ꢁ%106'065ꢁꢂꢂ ꢁ52'%+(+'&ꢁ4'%ꢁ/1&'
%#0%'.
$#%-
56#46
4'%14&+0)ꢁ/1&'
5'.'%6
126+10
':+6
1-
&7$$+0)
4'6740
&7$$+0)ꢁ(14ꢁ*&8ꢁ6#2'ꢁ%106'065ꢁꢂꢂ ꢁ&4ꢁ/1&'ꢃꢁ&8ꢁ%106'065ꢁꢂꢂ ꢁ52'%+(+'&ꢁ4'%ꢁ/1&'
%#0%'.
$#%-
56#46
Memo:
5'.'%6
126+10
':+6
1-
v
HDV contents will be imported in DR mode.
&7$$+0)
4'6740
Memo:
4
Select “START”, and press the [OK] button
Importing of the titles starts.
v
HDV contents will be imported in DR mode.
v
v
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
4
v
Select “START”, and press the [OK] button
Importing of the titles starts.
After titles are successfully imported, a “DUBBING IS
COMPLETED” message appears on the monitor.
v
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
%10(+4/
&7$$+0)ꢀ+5ꢀ%1/2.'6'&
1-
Cancel dubbing
m
To cancel importing before it starts
Select “CANCEL” from the menu, and press the [OK]
v
Imports data from current position
You can import videos from the current tape position till the
end as follows.
button to cancel importing of a title.
v
Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
1
Select “IMPORT FROM CURRENT POSITION”,
and press the [OK] button
A check mark is added to the “IMPORT FROM CURRENT
POSITION” item.
m
To cancel importing while it is in progress
Press the [OPTION] button. Select “CANCEL” from the
Cancel Importing menu, and press the [OK] button. Doing
so imports data to the HDD up to the position where you
have chosen to stop.
v
v
2
Select “NEXT”, and press the [OK] button
&7$$+0)
56'2
5'.'%6ꢁ6*'ꢁ/'6*1&ꢁ1(ꢁ+/2146
*&8ꢀ&8
*&&
+/2146ꢁ(41/ꢁ$')+00+0)
+/2146ꢁ(41/ꢁ%744'06ꢁ215+6+10
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
4'6740
':+6
&7$$+0)
v
A recording mode selection screen appears.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
3
On this screen, select “DISCiVIDEO”
Dubbing a Title from the
HDD to a BD/DVD
&7$$+0)
56'2
5'.'%6ꢁ+/2146ꢀ&7$$+0)
61ꢁ*&&
75$
Titles stored in the internal HDD can be dubbed to a BD/DVD
as follows.
61ꢁ&8&
&+5%
*&&
*&&
*&&
*&&
8+&'1
Memo:
5&
&+5%ꢀ5&
2+%674'
v
Disc types that can be used for dubbing with this unit are:
&+5%
*&8ꢀ&8
BD-RE, BD-R, DVD-RW, and DVD-R.
&+5%ꢁ%12;
&+5%
&+5%
%#0%'.
0':6
v
HD content for which the delete scene operation has been
5'.'%6
1-
':+6
&7$$+0)
applied cannot be dubbed to BDMV. Perform seamless
conversion before starting a dubbing operation.
126+10
4'6740
v
A check mark is added to the “DISCiVIDEO” item.
Note:
4
Select “NEXT”, and press the [OK] button
v
The following high bit-rate files may not meet the Blu-ray
Disc standards when they are dubbed to a BD.
Memo:
v
Dubbing can also be performed from the Playback
Navigation screen.
v
When a BDAV/BDMV disc is created (high-speed
dubbing) by importing content captured in the JVC GY-
HM700/100 SP mode and HQ mode.
① Select the titles to dub, and press the [OPTION]
button
② Select “DUB”, and press the [OK] button
③ Follow Steps 3 to 4 of “Preparation”
v
When a BDAV disc is created (high-speed dubbing) by
importing content captured in the JVC GZ-HD7/6 etc
FHD mode.
v
m
When a BDAV/BDMV disc is created by importing
content that is captured using another video camera at a
peak bit-rate that exceeds 28.8 Mbps.
Dubbing titles
Select “RECORDING FORMAT”, and press the
[OK] button
1
v
If the Blu-ray Disc standards are not met, playback on
another player may fail. To ensure that the standards are
satisfied, perform high-speed dubbing after converting the
recording mode, or perform dubbing by specifying a
recording mode.
&7$$+0)
56'2
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
&+5%
*&&
4'%14&+0)ꢀ(14/#6
4'%14&+0)ꢀ/1&'
&8&ꢁ8+&'1
Dubbing from the HDD to a BD/DVD
*+)*ꢁ52''&ꢀ&7$$+0)
m
Preparation
1
Set a BD or DVD on the disc tray
Memo:
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
v
&7$$+0)
A message appears on the monitor in the following cases
4'6740
where a disc cannot be written to. Take the necessary
actions according to the message.
v
Choose a format.
v
When an incompatible disc type is set
v
When there is insufficient space on the set disc
2
Select “RECORDING MODE”, and press the [OK]
button
v
When a finalized disc is set
2
Press the [DUBBING] button on the remote
control unit
The Dubbing menu screen appears.
&7$$+0)
56'2
v
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
&+5%
*&&
4'%14&+0)ꢀ(14/#6
4'%14&+0)ꢀ/1&'
&8&ꢁ8+&'1
*+)*ꢁ52''&ꢀ&7$$+0)
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
v
Select “HIGH-SPEED DUBBING” or a recording mode of
your preference.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Memo:
v
Dubbing a Title from the
HDD to a BD/DVD
(Continued)
Press the [MARK] button. A check mark will appear beside
the title.
All titles with a check mark can be added to the list at the
same time.
v
You can perform the following editing operations by
selecting a title from the dubbing title list and pressing the
[OK] button.
Memo:
v
High-speed dubbing
Select this option if you want to significantly shorten the
time required for dubbing.
Make use of a disc that supports high-speed recording.
v
Delete the selected title from the list
v
Change the list arrangement
v
Change the name of the selected title
v
AF/AN/AL/AE
Select “RENAME TITLE”, and press the [OK] button to
change the title of the dubbing source. Dubbing of the new
title is performed.
Can be selected for BD-R and BD-RE. Dubbing is done
with HD picture quality.
v
XP/SP/LP/EP
5
Select “NEXT”, and press the [OK] button
Dubbing is done with SD picture quality.
v
FR
&7$$+0)
56'2
An appropriate mode will be chosen automatically between
XP to EP according to the remaining memory on the disc.
%4'#6'ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)
&+5%
*&&
#$%
5RQTVUꢀꢀ
%QQMKPIꢁꢁꢁ
-+&5ꢂ914.&
0GYUꢂ###
4GRQTV
3
Select “NEXT”, and press the [OK] button
&7$$+0)
56'2
(.19'4ꢂ.'5510ꢂꢃ
#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)
$#%-
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
%#0%'.
0':6
5'.'%6
1-
':+6
&+5%
*&&
&7$$+0)
126+10
4'6740
4'%14&+0)ꢀ(14/#6
4'%14&+0)ꢀ/1&'
&8&ꢁ8+&'1
Note:
*+)*ꢁ52''&ꢀ&7$$+0)
v
“NEXT” cannot be selected for the following cases.
v
A title that cannot be dubbed has been selected
v
Disc memory is insufficient
%#0%'.
$#%-
0':6
5'.'%6
126+10
v
1-
':+6
A dubbing title list has not been created
&7$$+0)
4'6740
Memo:
v
Steps 6 and 7 are not applicable for “BDAV” and “DVD-VR”
disc formats. Go to step 8.
v
A screen for creating a dubbing title list appears.
4
Create a dubbing title list
6
Select a background image for the disc menu
&7$$+0)
56'2
&7$$+0)
56'2
%4'#6'ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
&+5%
*&&
&+5%
*&&
#$%
5RQTVUꢀꢀ
%QQMKPIꢁꢁꢁ
-+&5ꢂ914.&
0GYUꢂ###
4GRQTV
%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&
5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&
5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5
(+0#.+<'
(+456ꢀ2.#;
4'2'#6
10
010'
1((
(.19'4ꢂ.'5510ꢂꢃ
#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)
$#%-
4'0#/'ꢀ&+5%
%#0%'.
0':6
%#0%'.
$#%-
56#46
5'.'%6
1-
':+6
&7$$+0)
5'.'%6
126+10
126+10
4'6740
1-
':+6
&7$$+0)
4'6740
v
Follow the steps below to create a dubbing title list.
v
Select a background image for the disc menu from
“Background” or “Still Picture”.
① Select “ADD TITLE LIST FOR DUBBING”, and press
the [OK] button
② Select the titles to dub, and press the [OK] button
v
“SELECT FROM DEFAULT BACKGROUND”
A default background set is used for the disc menu.
v
“SELECT FROM STILL PICTURES”
Use a still image on the HDD for the disc menu.
The largest size allowed for a still image that is used as
the background is 5120 x 3840.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
② Select “REPEAT”, and choose either “OFF” or “ON”
Memo:
v
v
The background image of the disc menu can be selected
“OFF”
(only for DVD-Video and BD-MV).
The following sizes are recommended for still images.
The disc will stop and the menu will be displayed after all
the titles are played back.
v
:
BD
1920 x 1080
v
“ON”
:
DVD 720 x 480
Repeat playback from the first title will start automatically
after all the titles are played back.
v
When a still image is used, the two vertical or horizontal
edges are trimmed based on the side that is smaller than
the aspect ratio of the video to be dubbed.
③ Select “RENAME DISC”, and press the [OK] button
v
Change the disc name when finalizing is performed.
8
Select “START”, and press the [OK] button
&7$$+0)
56'2
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
&+5%
*&&
%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&
5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&
5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5
(+0#.+<'
(+456ꢀ2.#;
4'2'#6
10
Example of Side-cut Still Image
010'
1((
7
Set the operations for finalize
4'0#/'ꢀ&+5%
%#0%'.
$#%-
56#46
5'.'%6
126+10
&7$$+0)
56'2
1-
':+6
&7$$+0)
4'6740
5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5
&+5%
*&&
v
v
Dubbing starts. A progress bar is displayed during the
dubbing process.
%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&
5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&
After dubbing is complete, a “DUBBING IS COMPLETED”
message appears on the monitor.
5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5
(+0#.+<'
(+456ꢀ2.#;
4'2'#6
10
010'
1((
Memo:
v
Choose “BACK” from the menu and press the [OK] button
4'0#/'ꢀ&+5%
to return to the previous screen.
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
m
Cancel dubbing
To cancel dubbing before it starts
v
Finalize will be performed after dubbing if “ON” has been
set for “FINALIZE”.
If a BD-MV disc is being dubbed, “OFF” cannot be set for
“FINALIZE”. And once the BD-MV disc is dubbed the disc
cannot be rewritten.
v
Select “CANCEL” from the menu, and press the [OK]
button to cancel dubbing.
v
Alternatively, you can press the [RETURN] button to cancel
dubbing and return to the initial screen.
v
If a DVD-Video or BD-MV disc is being dubbed, the settings
for “FIRST PLAY”, “REPEAT” and “RENAME DISC” can be
changed.
To discontinue dubbing while it is in progress
v
Press the [OPTION] button. Select “CANCEL” from the
Cancel Dubbing menu, and press the [OK] button.
① Select “FIRST PLAY”, and select either “NONE”,
Memo:
“TOP MENU” or “TITLE 1”
v
When dubbing to a BD-R or DVD-R, the disc memory will
v
“NONE”
be reduced as data will still be written onto the disc up to
the point where dubbing is discontinued.
A finalized disc will not be automatically played back
when it is inserted into another device.
v
“TOP MENU”
The disc menu will be displayed automatically when a
finalized disc is inserted into another device.
v
“TITLE 1”
The first title on a finalized disc will be played back
automatically when it is inserted into another device.
Memo:
v
“NONE” cannot be selected for “FIRST PLAY” for BD-MV.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
4
Select “NEXT”, and press the [OK] button
Memo:
Dubbing Still Images from
the HDD
v
A message appears on the monitor when dubbing cannot
be performed in the following cases. When this occurs,
replace the disc or SD card with one that is usable.
Still images stored in the internal HDD can be dubbed to a
BD-RE or an SD card as follows.
v
When an incompatible disc or SD card is set
v
When there is insufficient space on the set disc or SD
card
Memo:
v
Only “JPEG” still image format is supported.
v
When an unformatted disc or SD card is set
m
Before dubbing
Dubbing to a disc
5
Select the still images to dub, and press the
[MARK] button
v
Set the BD-RE for dubbing on the disc tray
v
Dubbing to an SD card
&7$$+0)
56'2
Insert the SD card to be dubbed into the [SD SLOT]
%4'#6'ꢀ6+6.'ꢀ.+56ꢀ(14ꢀ&7$$+0)
)4172
2CIG
m
#..
Dubbing still images
1
Press the [DUBBING] button on the remote
control unit
The Dubbing menu screen appears.
v
2
On this screen, select “DISC/SDiPICTURE”
&7$$+0)
56'2
5'.'%6
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
)4172
&7$$+0)
126+10
4'6740
5'.'%6ꢁ+/2146ꢀ&7$$+0)
61ꢁ*&&
75$
61ꢁ&8&
&+5%
v
Pressing the [MARK] button adds a check mark to the
selected image.
All still images with a check mark are dubbed.
*&&
*&&
*&&
*&&
8+&'1
5&
&+5%ꢀ5&
2+%674'
&+5%
*&8ꢀ&8
&+5%ꢁ%12;
&+5%
Memo:
&+5%
v
To clear the check mark, select the corresponding still
image, and press the [MARK] button.
%#0%'.
0':6
v
Pressing the [OPTION] button displays a pop-up menu.
The pop-up menu enables you to perform the following
operations.
5'.'%6
1-
':+6
&7$$+0)
126+10
4'6740
3
Select the media to dub to from the media
selection screen
A checkmark will be added to the selected media.
:
:
:
BACK
Exits the pop-menu and returns to the
initial screen.
v
SELECT ALL
DESELECT ALL
Selects all still images within the same
group.
&7$$+0)
56'2
Clears the selection of all still images
within the same group.
+05'46ꢁ#0&ꢁ5'.'%6ꢁ#ꢁ/'&+#
Note:
v
A message appears if the selected still images do not fit
into the disc. Check mark cannot be added to a still image if
there is insufficient space on the disc.
*&&
$&ꢀ4'
*&&
5&ꢁ%#4&
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
6
Select “START”, and press the [OK] button
m
Dubbing from the Playback Navigation
screen
&7$$+0)
56'2
Dubbing can also be performed from the Playback Navigation
screen.
5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)
&7$$+0)ꢀ56+..ꢀ2+%674'5
1
Select the still images to dub, and press the
[OPTION] button
0#8+)#6+10 6+6.' ꢁ6*7/$0#+.ꢂ
8+&'1
07/$'4ꢀ1(ꢀ56+..ꢀ2+%674'5ꢀ61ꢀ$'ꢀ&7$$'&ꢂꢀꢃꢃꢃ
126+105
2+%674'
$#%-
2.#;
)4172
#..
&'.'6'
&7$
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
/1&'ꢀ%*#0)'
'&+6
&7$$+0)
4'6740
'&+6ꢀ+0(1
16*'45
v
v
Dubbing starts. A progress bar is displayed during the
dubbing process.
After dubbing is complete, a “DUBBING IS COMPLETED”
message appears on the monitor.
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
8+&'1 2+%674'
)4172
4'6740
Memo:
v
A directory of the following configuration is created in the
2
3
Select “DUB”, and press the [OK] button
media, and still images are written with file names ranging
from “PIC_0001.jpg” to “PIC_9999.jpg”.
Follow steps 3 to 5 of “Dubbing still images”
Memo:
root
DCIM
100JVCS
PIC_0001.JPG
PIC_0002.JPG
PIC_0003.JPG
v
Check marks of still images that appear on the Playback
navigation screen will remain added to the image on the
still image selection screen.
m
Cancel dubbing
101JVCS
PIC_0001.JPG
PIC_0002.JPG
PIC_0003.JPG
To cancel dubbing before it starts
v
Select “CANCEL” from the menu, and press the [OK]
button to cancel dubbing.
v
Alternatively, you can press the [RETURN] button to cancel
dubbing and return to the initial screen.
To discontinue dubbing while it is in progress
v
Press the [OPTION] button. Select “CANCEL” from the
Cancel Dubbing menu, and press the [OK] button.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
Memo:
v
Enabling Playback on
To cancel the finalizing operation, select “NO” and press
the [OK] button.
Other Devices (Finalizing)
5
Setting the top menu items
DVD-R and DVD-RW discs may need to be finalized before
they can be played on other DVD players.
(+0#.+<'
Memo:
v
6*'ꢁ&+5%ꢁ9+..ꢁ$'ꢁ(+0#.+<'&ꢁ61ꢁ'0#$.'ꢁ2.#;$#%-ꢁ10ꢁ16*'4ꢁ&8&ꢁ&'8+%'5
Discs in the Video mode becomes a DVD-Video format with
&8&ꢀ49ꢁ8KFGQ
a title menu after finalizing.
%*#0)'ꢁ&+5%ꢁ/'07ꢁ$#%-)4170&
5'.'%6ꢁ(41/ꢁ&'(#7.6ꢁ$#%-)4170&
v
Discs containing DVD-Video data can be finalized by
setting the disc operation settings according when the disc
is inserted into this unit.
5'.'%6ꢁ(41/ꢁ56+..ꢁ2+%674'5
(+456ꢁ2.#;
4'2'#6
612ꢁ/'07
1((
v
Recording or editing of the disc will not be possible after it
is finalized.
v
If a DVD that was recorded using VR mode has been
finalized, the disc can only be played back on VR mode
compatible devices.
(+0#.+<'
&1ꢁ016ꢁ(+0#.+<'
5'.'%6
1-
':+6
/'&+#ꢁ/#0#)'
126+10
4'6740
v
Before finalizing, set “FIRST PLAY”, “REPEAT”, and
“CHANGE DISC MENU BACKGROUND” accordingly.
Set according to the steps below.
Finalizing
1
Set the BD or DVD to be finalized on the disc tray
① Select “FIRST PLAY”, and select an appropriate first
2
Press the [MEDIA MANAGE] button on the
remote control unit
The Media Management menu screen appears.
play setting item
v
This item is used for setting the disc operation when a
v
finalized disc is inserted into another device.
:
:
:
NONE
A finalized disc will not be automatically
played back when it is inserted into another
device.
/'&+#ꢀ/#0#)'/'06
$&ꢁ&8&
TOP MENU
TITLE 1
The disc menu will be displayed
automatically when a finalized disc is
inserted into another device.
(14/#6
(+0#.+<'
4'0#/'ꢀ&+5%
5&ꢀ%#4&
The first title on a finalized disc will be
played back automatically when it is
inserted into another device.
(14/#6
$&ꢂ8+&'1ꢀ#ꢀ'4#5'
*&&
(14/#6
② Select “REPEAT”, and select an appropriate repeat
setting item
v
Set the disc action to be taken after all titles have been
played back.
3
Select “FINALIZE” from “BD/DVD”
:
:
OFF
The disc will stop and the menu will be displayed
after all the titles are played back.
4
Select “YES” and press the [OK] button
The top menu setting screen appears.
v
ON
Repeat playback from the first title will start
automatically after all the titles are played back.
%10(+4/
&+5%ꢀ9+..ꢀ$'ꢀ(+0#.+<'&ꢀ(14ꢀ2.#;$#%-ꢀ10ꢀ16*'4ꢀ&8&ꢀ&'8+%'5
+6ꢀ9+..ꢀ6#-'ꢀ#$176ꢀ::ꢀ/+076'5
;17ꢀ%#0016ꢀ5612ꢀ6*'ꢀ(+0#.+<#6+10ꢀ10%'ꢀ+6ꢀ56#465
&1ꢀ;17ꢀ9#06ꢀ61ꢀ(+0#.+<'!
;'5
01
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
③ Select “CHANGE DISC MENU BACKGROUND” to
Unfinalizing a disc
Only DVD-RW discs that are finalized on this unit can be
select a background image for the top menu
v
You can register and use a background image of your
unfinalized.
preference.
After a disc is unfinalized, addition of new titles and editing
are possible.
(+0#.+<'
Note:
5'.'%6ꢀ#ꢀ6+6.'ꢀ#5ꢀ$#%-)4170&ꢀ&'5+)0ꢀ(14ꢀ6*'ꢀ/'07ꢀ5%4''0
2CIG
v
All discs except DVD-RW (VR mode) cannot be unfinalized.
)4172
#..
m
To unfinalize a disc
1
Set a DVD-RW disc that is finalized by this unit
on the disc tray
2
Press the [MEDIA MANAGE] button on the
remote control unit
The media management menu screen appears.
v
5'.'%6
126+10
1-
':+6
/'&+#ꢀ/#0#)'/'06
4'6740
/'&+#ꢀ/#0#)'/'06
Memo:
$&ꢁ&8&
v
The items in “FIRST PLAY”, “REPEAT” and “CHANGE
(14/#6
(+0#.+<'
4'0#/'ꢀ&+5%
5&ꢀ%#4&
6
Select “FINALIZE”, and press the [OK] button
(14/#6
$&ꢂ8+&'1ꢀ#ꢀ'4#5'
*&&
(+0#.+<'
(14/#6
6*'ꢁ&+5%ꢁ9+..ꢁ$'ꢁ(+0#.+<'&ꢁ61ꢁ'0#$.'ꢁ2.#;$#%-ꢁ10ꢁ16*'4ꢁ&8&ꢁ&'8+%'5
&8&ꢀ49ꢁ8KFGQ
%*#0)'ꢁ&+5%ꢁ/'07ꢁ$#%-)4170&
5'.'%6ꢁ(41/ꢁ&'(#7.6ꢁ$#%-)4170&
3
4
Select “FINALIZE” from “BD/DVD”
5'.'%6ꢁ(41/ꢁ56+..ꢁ2+%674'5
Select “YES” and press the [OK] button
(+456ꢁ2.#;
4'2'#6
612ꢁ/'07
1((
FINALIZE
&1ꢁ016ꢁ(+0#.+<'
5'.'%6
126+10
1-
4'6740
':+6
/'&+#ꢁ/#0#)'
%10(+4/
6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ70(+0#.+<'
+6ꢀ6#-'5ꢀ#$176ꢀ:::ꢀ/+076'5
;17ꢀ%#0016ꢀ5612ꢀ6*'ꢀ241%'55ꢀ10%'ꢀ+6ꢀ56#46'&
&1ꢀ;17ꢀ9#06ꢀ61ꢀ70(+0#.+<'!
v
v
Finalizing starts.
After finalization is complete, a “THE DISC HAS BEEN
FINALIZED” message appears on the monitor.
;'5
01
%10(+4/
v
v
Unfinalizing starts.
6*'ꢀ&+5%ꢀ*#5ꢀ$''0ꢀ(+0#.+<'&
After unfinalizing is complete, a “THE DISC HAS BEEN
UNFINALIZED” message appears on the monitor.
1-
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
4
Select “NEXT”, and press the [OK] button
The disc tray will open automatically.
v
Copying the Entire Disc
5
6
Set the source BD or DVD on the disc tray
Select “START”, and press the [OK] button
Copying the entire disc allows all content on a BD (BDMV) or
DVD (AVCHD, DVD-Video) to be copied onto another disc.
Note:
v
Content cannot be copied to a formatted BD-R or DVD-R
disc. Make use of an unformatted disc.
&7$$+0)
56'2
5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)
&+5%ꢀ%12;
v
Use a DVD-R/-RW instead of a BD-R/-RE or DVD when the
source disc is a BD disc.
v
The disc to be copied onto will be formatted when copy is
performed. Check that the disc has not been used before
or if it is ok to delete data on the disc when using a BD-RE
or a DVD-RW.
+05'46ꢀ6*'ꢀ&+5%ꢀ61ꢀ$'ꢀ%12+'&
v
In the case of BD, volume labels are not copied.
%#0%'.
$#%-
56#46
v
If an unsupported disc is set, “UNABLE TO IMPORT FROM
5'.'%6
126+10
1-
':+6
DISC” or “UNABLE TO DUB ONTO DISC INSERT
ANOTHER DISC” will be displayed on the monitor. Use a
disc that is supported by this unit.
&7$$+0)
4'6740
v
v
The disc tray will close automatically. The source BD or
DVD will be recognized, and copying to the internal HDD
will proceed.
For details on discs that are supported by this unit, refer to
The disc tray will open automatically after copying has
finished and “READY TO COPY NOW. INSERT THE DISC
FOR COPYING” will be displayed on the monitor.
1
Press the [DUBBING] button on the remote
control unit
The Dubbing screen appears.
v
Memo:
v
Confirm the insufficient space on the internal HDD when
the copy interrupts.
&7$$+0)
56'2
7
8
Set a BD or DVD to copy on the disc tray
Select “START”, and press the [OK] button
5'.'%6ꢁ+/2146ꢀ&7$$+0)
61ꢁ*&&
75$
61ꢁ&8&
&+5%
8+&'1
*&&
*&&
*&&
*&&
&7$$+0)
56'2
5&
&+5%ꢀ5&
2+%674'
&+5%
*&8ꢀ&8
5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)
&+5%ꢀ%12;
&+5%ꢁ%12;
&+5%
&+5%
%#0%'.
0':6
5'.'%6
1-
':+6
4'#&;ꢀ61ꢀ%12;ꢀ019ꢂꢀ+05'46ꢀ6*'ꢀ&+5%ꢀ(14ꢀ%12;+0)
&7$$+0)
126+10
4'6740
2
Select “DISChDISC”, and press the [OK] button
A menu screen for copying the entire disc appears.
v
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
Memo:
&7$$+0)
4'6740
v
During copy of the entire disc, data is temporarily copied to
the internal HDD.
v
The disc tray will close automatically. BD or DVD will be
recognized, and the contents that were copied to the HDD
will be copied to the disc.
v
Only discs that are not copyright-protected can be copied.
3
Set the number of discs to copy using the [ J / K ]
buttons
You can specify up to a maximum of 10 discs.
Memo:
v
The copy operation will not be performed when the
remaining disc memory is not sufficient.
v
&7$$+0)
52'%+(;ꢀ6*'ꢀ07/$'4ꢀ1(ꢀ%12+'5ꢀ#0&ꢀ5'.'%6ꢀ̌':'%76'̍
07/$'4ꢀ1(ꢀ%12+'5
2
%#0%'.
$#%-
0':6
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
&7$$+0)
4'6740
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
9
Complete the entire disc copying
After copy is complete the tray will open automatically, and
copy of the entire disc ends.
Recording Using External
Inputs
v
Videos on an external device that is connected to i.LINK (HDV/
DV) or video / S-video input can be recorded to the HDD.
BD, DVD can be recorded from the [VIDEO]/[S-VIDEO] or
SDI input.
%10(+4/
Memo:
v
%12;+0)ꢀ1061ꢀ6*'ꢀ:::ꢀ&+5%ꢀ+5ꢀ%1/2.'6'&
Only titles that are not copyright-protected can be imported.
1-
1
2
Press the [HDD] or [BD/SD] button to select the
location to record the file
Press the [INPUT SELECT] button on the remote
control, and choose external input (SDI or HDV/DV
or L-1)
3
Press the [REC MODE] button and select a
recording mode
Memo:
v
The screen prompting you to insert a new disc appears
4
Press the [ R ] and [ I ] remote control buttons
together to start the recording process
Recording can also be start by pressing the [ R ] button on
this unit.
repeatedly until this unit has finished copying the number of
discs specified in Step 3. When the message appears, set
a new BD or DVD on the disc tray, select “START”, and
press the [OK] button.
v
5
Operate the external device using i.LINK(HDV/
DV) or the video/S-video input or SDI input to
output the videos to be recorded
&7$$+0)
56'2
5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)
&+5%ꢀ%12;
6
Press the [ o ] button on either this unit or the
remote control to display the pop-up screen,
choose “STOP” and press the [OK] button
%12;+0)ꢀ1061ꢀ6*'ꢀꢂ56ꢀ&+5%ꢀ+5ꢀ%1/2.'6'&
+05'46ꢀ#ꢀ0'9ꢀ&+5%
v
End the recording.
Memo:
v
When recording images via a video camera using i.LINK
connection, recording may stopped if the video camera is
loaded with a DV tape while in the shooting mode. In this
case, remove the DV tape before recording.
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
&7$$+0)
4'6740
v
v
v
Recording will be stopped if the maximum recording time has
been reached, or if there is insufficient memory in the media.
v
v
After copy is complete, the data copied onto the HDD will
be deleted.
For HDV contents, “DR” will be used to record instead of the
selected recording mode.
Select “CANCEL” from the menu, and press the [OK]
button to cancel disc copying.
MAXIMUM CONTINUOUS RECORDING TIME
:
:
:
HDD
24 hours (*1)
8 hours
&7$$+0)
56'2
DVD-RW
BD-RE
5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)
8 hours
&+5%ꢀ%12;
%10(+4/
:
*1 Title will automatically be split into time separated by 8
hours. The dividing point will not be recorded.
For the recording modes and maximum recording time for
&1ꢀ;17ꢀ9#06ꢀ61ꢀ%#0%'.ꢀ&7$$+0)!
;'5
01
m
Checking whether SDI input signals can be
recorded
%#0%'.
$#%-
56#46
5'.'%6
126+10
1-
':+6
1
Press the [OPTION] button on the remote
control, and select “SDI INPUT SIGNAL”
&7$$+0)
4'6740
A screen showing the details of the SDI input signal appears.
2
Check to ensure that “RECORD” is displayed as
“POSSIBLE”
Recording is not possible if it is displayed as “IMPOSSIBLE”.
Memo:
v
It takes a little moment to start recording after the button is
pressed.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Importing
m
RECORDABLE MEDIA
RECORDING MODE
RECORDABLE MEDIA
HDD
DVD-R/RW
(VR format)
BD-R/RE
(BD-AV format)
DR
HDV
-
HDV
-
AF (HD)
AN (HD)
AL (HD)
AE (HD)
XP (SD)
SP (SD)
LP (SD)
EP (SD)
DR1(HD)
DR2(HD)
DR3(HD)
DR4(HD)
-
-
-
-
-
-
-
-
-
-
-
SD-SDI/DV/L-1
SD-SDI/DV/L-1
SD-SDI/DV/L-1
SD-SDI/DV/L-1
HD-SDI
HD-SDI
HD-SDI
HD-SDI
SD-SDI/DV/L-1
SD-SDI/L-1
SD-SDI/L-1
SD-SDI/L-1
SD-SDI/L-1
HD-SDI
HD-SDI
HD-SDI
HD-SDI
SD-SDI/DV/L-1
SD-SDI/DV/L-1
SD-SDI/DV/L-1
-
-
-
-
m
Recordable (Imageable) SDI Signals
Pixel Structure
INPUT
OUTPUT
HD-SDI
SD-SDI
HD-SDI
SD-SDI
720x480/59.94i
-
U
-
-
-
U
-
1280x720/23.98p
1280x720/59.94p
1920x1080/23.98p
1920x1080/23.98psf
1920x1080/59.94i
U
U
U
U
U
-
U
-
-
-
-
-
-
-
-
U
-
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
About Playing Back
Using Playback Navigation
Videos or edited videos stored on the internal HDD, as well as
videos stored on a disc or SD card can be played back on this unit.
The types of media that are playable on this unit are as follows.
Videos can be easily played back for viewing using the
“Playback Navigation” function available on this unit.
v
Videos and still images stored on the internal HDD
Displaying the Playback Navigation screen
v
Videos stored on different disc types
v
1
Select the location of the playback file
Press the [HDD] button on the remote control unit
Play back videos or still images stored on the HDD.
Press the [BD/SD] button on the remote control unit.
Videos and still images stored on backup discs created
using the “Everio Writer”
v
v
Videos and still images stored on SD cards
v
These videos can be easily played back for viewing using the
“Playback Navigation” software that comes with this unit.
For details on the “Playback Navigation” software, refer to
Play back videos or still images stored on a BD/DVD or a
SD.
2
Press the [NAVIGATION] button on the remote
control unit
The Playback Navigation screen appears.
Memo:
v
This unit does not support DivX videos.
v
v
If AVCHD files are displayed in thumbnails, black bars may appear
on the left and right borders depending on the video resolution.
Memo:
v
Pressing the [BD/SD] button each time switches the media
to play back between BD/DVD and SD.
v
To display MOV* files stored on an SD card using Playback
Navigation, make use of list display. Thumbnail display is
not supported. Files on the SD card cannot be played back
directly. To do so, import them into a HDD.
v
You can also switch the media to play back by pressing the
[HDD] or [BD/SD] button when the Playback Navigation
screen is displayed.
v
For details on importing MOV* files from an SD card, refer to
:
Operating Playback Navigation
MOV*
MOV files that are taken in SP mode and HQ mode
using the JVC ProHD Camcorder GY-HM700/100
m
Playing a video/still image
Plays the selected video/still image.
Display Marks on the Playback Navigation Screen
6+6.' ꢃ6*7/$0#+.ꢄ
0#8+)#6+10
8+&'1
4'/#+0 ꢀꢁꢂ
2+%674'
Icon
Mark name
Explanation
2CIG
)4172
Protect Mark Indicates protected titles.
001
002
003
007
004
008
VKVNG
Mode
Conversion
Preset Mark
Indicates titles for which mode
conversion has been preset.
005
006
Not Viewed
Mark
Indicates titles that have not
been viewed or groups
containing titles that have not
been viewed.
5'.'%6
126+10
1-
4'6740
24'8ꢅ2)
0':6ꢅ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
v
Select a title to play back, followed by pressing the [OK] or
[I] button to play the selected video/still image.
Scene
Indicates titles for which scene
Delete Mark delete or chapter delete has
been applied.
Memo:
v
Select a group and press the [OK] button to display all titles
in the group.
Group Mark
Indicates a group.
Playlist Mark Indicates a playlist.
Not Playable Indicates titles that cannot be
Mark
played.
Question
Mark
Indicates titles of which the
thumbnails cannot be
displayed. Playback may not be
possible.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
m
m
Switching between thumbnail and list
displays
Switching between video and still image
displays
You can switch between the thumbnail display and list display
of a video.
You can switch the display between the video thumbnail list
screen and still image thumbnail screen.
v
v
When the video thumbnail list screen is displayed
When the video thumbnail list screen is displayed
6+6.' ꢃ6*7/$0#+.ꢄ
6+6.' ꢃ6*7/$0#+.ꢄ
0#8+)#6+10
8+&'1
0#8+)#6+10
8+&'1
4'/#+0 ꢀꢁꢂ
4'/#+0 ꢀꢁꢂ
2+%674'
2+%674'
2CIG
2CIG
)4172
)4172
001
002
003
007
004
008
001
002
003
007
004
008
VKVNG
VKVNG
005
006
005
006
5'.'%6
126+10
5'.'%6
126+10
1-
4'6740
1-
4'6740
24'8ꢅ2)
0':6ꢅ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
24'8ꢅ2)
0':6ꢅ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
Press the [RED] button to display the title list screen.
When the title list screen is displayed
Press the [GREEN] button to display the still image
thumbnail list screen.
v
v
When the still image thumbnail list screen is displayed
0#8+)#6+10 6+6.' ꢄ.+56ꢅ
8+&'1
2+%674'
6+6.'ꢂ6*7/$0#+.ꢃ
0#8+)#6+10
8+&'1
2CIG
4'/#+0 ꢀꢁꢀ
2+%674'
)4172
#..
2CIG
(1.&'4
#$%
5RQTVUꢀꢀ
%QQMKPIꢁꢁꢁ
-+&5ꢂ914.&
0GYUꢂ###
4GRQTV
(.19'4ꢂ.'5510ꢂꢃ
#PKOCN
5'.'%6
1-
4'6740
)4172
24'8ꢂ2)
0':6ꢂ2)
':+6
6*7/$0#+. 2+%674'
0#8+)#6+10
126+10
5'.'%6
126+10
1-
24'8ꢄ2)
0':6ꢄ2)
':+6
0#8+)#6+10
%106'06
(1.&'4
4'6740
Press the [RED] button to display the video thumbnail list
screen.
Press the [RED] button to display the video thumbnail list
screen.
m
Displaying a group/folder
A group/folder screen can be displayed.
m
Displaying the Option menu
Displaying the Option menu enables you to perform different
operations on a selected title/group, including “BACK”,
“PLAY”, “DELETE”, “DUB”, “GROUP”, “UNGROUP”, “DO
NOT GROUP”, “MODE CHANGE”, “EDIT”, “EDIT INFO” and
“OTHERS”.
6+6.'ꢂ.+56ꢃ
0#8+)#6+10
8+&'1
)4172
4'/#+0 ꢀꢁꢀ
#..
2CIG
9GFFKPI
&TKXKPI
$KTVJFC[ꢄ%QOOKVVGG
6TCXGN
2KEPKE
001
005
1
Select a title/group, and press the [OPTION]
button
5RQTVUꢄFC[
2KCPQꢄEQPEGTV
v
An Option menu appears.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
$#%-
5'.'%6
126+10
1-
4'6740
24'8ꢄ2)
0':6ꢄ2)
':+6
.+56
2+%674'
2.#;
0#8+)#6+10
)4172
#..
&'.'6'
&7$
001
002
003
004
008
&1ꢂ016ꢂ)4172
/1&'ꢂ%*#0)'
'&+6
Press the [YELLOW] button to display the group/folder
screen.
VKVNG
'&+6ꢂ+0(1
16*'45
005
006
007
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
v
EDIT INFO
Using Playback Navigation
(Continued)
Switches to the menu screen of the sub-items.
MODIFY TITLE NAME/MODIFY GROUP NAME
Switches to the rename screen for the selected title/
group name.
v
2
Select an operation option, and press the [OK]
button
v
Options that cannot be operated are displayed in gray and
cannot be selected.
v
MODIFY THUMBNAIL
Switches to the thumbnail modification screen of the
selected title.
v
MODIFY DATE
Option menu list
BACK
Switches to the recording date modification screen of the
selected title.
v
Returns to the previous screen.
v
PLAY
v
Plays back the selected title/group.
For details on the button operations during playback, refer
PROTECT
Switches to the protection screen of the selected title/
group.
v
DELETE
Deletes a selected title/group.
v
UNPROTECT
Switches to the screen for turning off protection of the
selected title/group.
v
DUB
Performs dubbing of a selected title/group.
v
GROUP
v
OTHERS
Groups the selected titles/groups.
Switches to the menu screen of the other-items.
v
CHAPTER LIST
v
UNGROUP
v
DETAILS
Ungroups a selected group.
v
THUMBNAIL
v
LIST
v
DO NOT GROUP
v
VIDEO
Removes the selected titles from a group.
v
PICTURE
v
GROUP
v
v
FOLDER SELECT
MODE CHANGE
v
CONTENT
Changes the mode of the selected title/group.
v
CHAPTER LIST
Displays the chapters of a selected title.
v
EDIT
Switches to the menu screen of the sub-items.
v
CHAPTER EDIT
Switches to the chapter edit screen of the selected title.
v
PLAYLIST EDIT
Switches to the playlist edit screen of the selected title.
v
DELETE SCENE
Switches to the delete scene screen of the selected title.
v
DIVIDE
Switches to the dividing screen of the selected title.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Frequently used button operations
Video Playback Operation
m
[ I ] button
v
If the stop position (resume point) is memorized in the
selected video, pressing the button plays back the video
from this position.
The video may not resume playback depending on the
v
If playback is paused (Still mode), pressing the button
resumes playback.
m
[ o ] button
v
Pressing the button stops playback after memorizing the
stop position (resume point).
v
Pressing the button again after playback stops clears the
memory of the stop position (resume point).
m
[ W ] button
Pressing the button stops playback temporarily.
v
m
[ N ] button
v
Pressing the button once during playback switches to a
playback speed of 1.3 times (with audio sound).
Pressing the button in the 1.3x playback or fast forward
v
mode fast forwards the video.
Pressing the button each time switches the search speed.
(5xh10xh30xh60x)
Memo:
v
The listed speed for searching and slow motion is an
approximate amount.
v
Pressing the button in the Still mode forwards the video
frame by frame.
v
Pressing and holding down the button in the Still mode
starts playback in slow motion.
Pressing the button during playback in slow motion
switches the playback speed. The speed changes each
time the button is pressed.
(1/24xh1/16xh1/8xh1/2x)
m
[ O ] button
v
During normal playback, 1.3x playback, fast forward, or fast
reverse, pressing the button fast reverses playback.
Pressing the button each time switches the search speed.
(1xh5xh10xh30x)
v
Pressing the button in the Still mode reverses the video
frame by frame.
v
Pressing and holding down the button in the Still mode
starts reverse playback of the video in slow motion.
Pressing the button during playback in slow motion
switches the playback speed. The speed changes each
time the button is pressed.
(1/24xh1/16xh1/8xh1/2x)
Memo:
v
The listed speed for searching and slow motion is an
approximate amount.
m
[ T ] / [ S ] button
Pressing any of the buttons moves the chapter position.
v
m
[MARK] button
Pressing the button enables you to add a chapter mark to a
v
title.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Useful button operations
Video Playback Operation
(Continued)
m
[PB MODE] button
v
Displays the Playback Settings screen, which enables you
to modify the settings.
m
[ v ] button
For details, refer to “Changing Playback Settings”.
v
During normal playback, 1.3x playback, slow motion
playback, fast forward, or fast reverse, pressing the button
moves the playback position forward by about 30 seconds.
Pressing the button multiple times moves playback to the
position equivalent to the number of times pressed
multiplied by 30 seconds.
m
[AUDIO] button
Switches the audio channel.
v
m
[SUB TITLE] button
Switches the subtitle display.
v
v
Normal playback will resume after the position has been
moved. If pressed during 1.3x playback, 1.3x playback will
continue after the position has been moved.
m
[ANGLE] button
Switches the angle.
v
Contents may be played back in the normal mode
depending on the type of disc or content.
Memo:
v
Pressing the [AUDIO], [SUB TITLE], or [ANGLE] button has
v
Pressing the button in the Still mode moves the current
paused position forward by about 30 seconds while
maintaining the Still mode.
no effect if their selection is not available in the playback
video.
m
[ w ] button
v
During normal playback, 1.3x playback, slow motion
playback, fast forward, or fast reverse, pressing the button
moves the playback position back by about seven seconds.
Pressing the button multiple times moves playback to the
position equivalent to the number of times pressed
multiplied by seven seconds.
v
Normal playback will resume after the position has been
moved. If pressed during 1.3x playback, 1.3x playback will
continue after the position has been moved.
Contents may be played back in the normal mode
depending on the type of disc or content.
v
Pressing the button in the Still mode moves the current
paused position back by about seven seconds while
maintaining the Still mode.
m
[HDD] button
v
During playback of videos on a “BD/DVD” or “SD”, pressing
the button stops the current playback and switches to the
“HDD” mode.
Pressing the button during display of the Playback
Navigation screen switches to the Playback Navigation
screen for the “HDD” mode.
m
[BD/SD] button
v
During playback of videos on a “BD/DVD” or “SD”, pressing
the button stops the current playback and switches from
“BD/DVD” to “SD” or vice versa.
Pressing the button during display of the Playback
Navigation screen switches to the Playback Navigation
screen for the other media. During playback of videos on
the “HDD”, pressing the button stops the current playback
and switches to “BD/DVD” mode.
Memo:
v
The display switches automatically to the SD mode only if
the inserted SD card contains playable videos or still
images.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Playing an EverioBackup Disc*
Playing Videos on a BD/
DVD
:
EverioBackup* Data disc containing high-definition videos
that are recorded in the MPEG2 format
using a DVD writer for Everio.
Playback starts automatically after a BD/DVD is set.
If the Auto Play feature is disabled, play the title using
Playback Navigation.
1
Set the disc on the disc tray
2
Press the [NAVIGATION] button
The Playback Navigation screen appears.
Memo:
v
v
For details on the button operations during playback, refer
3
Select a title, and press the [OK] button
Playback of the selected title starts.
v
Memo:
v
Playing a disc when Auto Play is enabled
If the current playback location is HDD or SD, press the
[BD/SD] button on the remote control unit to switch it to BD/
DVD.
1
Set a BD or DVD on the disc tray
v
Auto Play starts.
v
Videos can also be played back without starting up
Playback Navigation.
Pressing the [I] button plays back titles starting from that
with the oldest recording date.
Playing a disc when Auto Play is disabled
1
Set a BD or DVD on the disc tray
2
Press the [NAVIGATION] button
The Playback Navigation screen appears.
v
Playing Video Discs Created Using a PC
Videos that are created using a PC can be played back using
Playback Navigation.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
2+%674'
1
Set the disc on the disc tray
001
2
Press the [NAVIGATION] button
The Playback Navigation screen appears.
v
3
Select a title, and press the [OK] button
Playback of the selected title starts.
v
Memo:
v
The formats that can be played back are BDAV, BDMV,
DVD-Video and DVD-VR (CPRM-compatible).
5'.'%6
126+10
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
'06'4
$#%-
8+&'1 2+%674'
)4172
v
v
If the current playback location is HDD or SD CARD, press
the [BD/SD] button on the remote control unit to switch it to
BD/DVD.
3
Select a title, and press the [OK] button
Playback of the selected title starts.
v
Videos can also be played back without starting up
Playback Navigation.
Pressing the [I] button starts playback from the stop
Memo:
v
If the current playback location is HDD or SD, press the
position (resume point) of the disc.
[BD/SD] button on the remote control unit to switch it to BD/
DVD.
If the stop position (resume point) is not memorized or if the
setting for resume has been set to “OFF”, playback starts
from the beginning of the disc.
v
Videos can also be played back without starting up
Playback Navigation.
Pressing the [I] button starts playback from the stop
v
Playback may not be possible due to compatibility
problems.
position (resume point) of the disc.
If the stop position (resume point) is not memorized or if the
setting for resume has been set to “OFF”, playback starts
from the beginning of the disc.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Playing Videos on the HDD
Playing Videos on a SD
Titles stored on the HDD can be played back using Playback
Card
Navigation.
Titles stored on an SD card can be played back using
Playback Navigation.
You can select a video to play from “Title”.
You can select a video to play from “Title”, “Group”, or
“Playlist”.
Memo:
v
1
Insert the SD card into the [SD SLOT]
For details on the button operations during playback, refer
v
Switch the playback location to “SD CARD” after the SD
card is detected by the unit.
2
Press the [NAVIGATION] button
The Playback Navigation screen appears.
Playing titles stored on the HDD
v
1
Press the [NAVIGATION] button
v
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
The Playback Navigation screen appears.
2+%674'
2
Select the titles to playback, and press the [I]
button
Playback of the selected title starts.
001
v
Memo:
v
If the current playback location is “BD/DVD” or “SD CARD”,
press the [HDD] button on the remote control unit to switch
it to “HDD”.
v
v
To play back specific titles within a group, select the group,
press the [OK] button, and select the titles accordingly.
5'.'%6
126+10
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
'06'4
$#%-
8+&'1 2+%674'
)4172
Videos can also be played back without starting up
Playback Navigation.
3
Select a title, and press the [OK] button
Playback of the selected title starts.
Pressing the [I] button starts playback of the most recently
played title.
v
If there are no recently played titles, playback starts from
the title with the most recent recording date.
Memo:
v
Playback navigation displays AVCHD files stored on the SD
card in titles, not in scenes (chapters). Titles are grouped
such as according to the date, recording mode, or number
of scenes. Make use of thumbnail display to display titles.
List display is not supported.
v
The formats that can be played back are AVCHD and SD-
VIDEO. If AVCHD files are displayed in thumbnails, black
bars may appear on the left and right borders depending on
the video resolution.
v
When there are files of different formats (AVCHD, SD-
VIDEO, MOV*) in the SD card, press the [RED] button to
select the format you want to display.
:
MOV*
MOV files that are taken in SP mode and HQ
mode using the JVC ProHD Camcorder GY-
HM700/100
v
Videos can also be played back without starting up
Playback Navigation.
Pressing the [I] button starts playback from the stop
position (resume point).
If the stop position (resume point) is not memorized,
playback starts from the beginning of the playable content.
If the setting for “QUICK STARTUP” is set to “OFF”, the
resume point will not be memorized when the power is
turned OFF.
For details on the button operations during playback, refer to
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Enabled button operations during still
image playback
Playing Still Images (JPEG)
Still images stored on the HDD/BD/DVD/SD card can be
played back using Playback Navigation.
m
[ I ] button
v
Pressing the button when a title/group is selected starts
playback of the still images in the title/group in a slideshow.
Playing still images
m
[ o ] button
Pressing the button stops the slideshow and displays the
Playback Navigation screen.
1
Select the playback location
v
:
HDD
If the current playback location is “BD/DVD” or
“SD CARD”, press the [HDD] button on the remote
control unit to switch it to “HDD”.
m
[ W ] button
Pressing the button stops the slideshow temporarily.
v
:
BD/DVD If the current playback location is “HDD” or “SD
CARD”, press the [BD/SD] button on the remote
control unit to switch it to “BD/DVD”.
m
[ S ] / [ T ] button
Pressing the button displays the previous or next still
image.
v
:
SD card If the current playback location is “HDD” or “BD/
DVD”, press the [BD/SD] button on the remote
control unit to switch it to “SD CARD”.
m
[ A ] button
Pressing the button ends playback of the still images and
turns the power of the unit to “Off”.
2
Set the media
v
v
To play a media other than “HDD”, set the media on which
the still images are stored.
Memo:
:
v
BD/DVD Set a BD or DVD on the disc tray
The display of still images can be zoomed in/out or rotated
using the following buttons when the slideshow is paused.
:
SD card Insert the SD card into the [SD SLOT]
v
[ v ] / [BLUE] button
3
Select the still images to play, and press the [ I ]
button
Images selected are played back in a slideshow.
Rotates the still image by 90° in the anti-clockwise
v
direction.
v
[ w ] / [YELLOW] button
6+6.'ꢂ6*7/$0#+.ꢃ
0#8+)#6+10
8+&'1
Rotates the still image by 90° in the clockwise direction.
4'/#+0 ꢀꢁꢀ
2+%674'
v
[OK] / [RED] button
2CIG
(1.&'4
Enlarges the still image.
v
[RETURN] / [GREEN] button
Reduces the still image.
v
[ J / K / H / I ] button
Moves the display position toward the direction indicated
by the button.
v
This unit does not have a still image edit feature. Still
5'.'%6
126+10
1-
24'8ꢄ2)
0':6ꢄ2)
':+6
0#8+)#6+10
%106'06
(1.&'4
images cannot be saved when they are zoomed in or
rotated.
4'6740
v
Priority of display is given to the media (“BD/DVD” or “SD
Memo:
CARD”) that contains playable still images.
If both “BD/DVD” and “SD CARD” contain playable videos,
priority of display will be given to the most recently used
media.
v
The slide show plays back images according to the date of
the files.
v
v
If folders exist, files inside the selected folder will be played.
You can specify the “REPEAT”, “SLIDESHOW INTERVAL”
and “SLIDESHOW EFFECTS” settings in the Playback
Settings menu.
“Playback Settings”.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Playback settings
Changing Playback
Settings
2.#;$#%-ꢀ5'66+0)
4'2'#6
1((
%*#0)'ꢀ6+6.'
%*#0)'ꢀ%*#26'4
6+/'ꢀ,7/2
Displaying the playback settings menu
1
Press the [PB MODE] button on the remote
control unit during the playback of a title
The Settings Menu screen appears.
v
v
The playback settings menu can only be displayed during
the playback of a title.
v
Only settings that are supported by the current title being
played back can be changed in the playback settings
menu.
m
REPEAT
The following items can be set.
Items are not displayed if they cannot be set.
Items displayed in gray cannot be set.
Setting Values
OFF
Description
Turns off repeat.
Playback Settings Menu
Repeats playback of the currently played
title.
TITLE
Audio/subtitle settings
Repeats playback of the currently played
chapter.
CHAPTER
TRACK
Repeats playback of the currently played
track.
#7&+1ꢁ57$6+6.'
#7&+1ꢂ.#0)7#)'
ꢀ
.ꢁ4
ꢃ
Repeats playback within the currently
played folder.
FOLDER
%*#0)'ꢂ#7&+1ꢂ176276
57$6+6.'ꢂ.#0)7#)'
Repeats playback of the entire disc.
ALL
A-B
Repeats playback of the section between the
specified starting and ending points.
Pressing the [OK] button specifies the
displayed scene as the starting point (Point
A). Pressing the [OK] button after forwarding
playback specifies the displayed scene as the
ending point (Point B).
Memo:
m
CHANGE TITLE
v
“AUDIO/SUBTITLE” will be displayed only if they are
available in the video content. The setting value differs
depending on the content. Items that are not available in
the content cannot be set.
You can change to a different title by entering the corresponding
numeric value. Any value that is larger than the number of titles
cannot be entered.
m
CHANGE CHAPTER
m
m
m
AUDIO LANGUAGE
You can change to a different chapter by entering the
corresponding numeric value. Any value that is larger than the
number of chapters cannot be entered.
CHANGE AUDIO OUTPUT
m
SIGNAL TYPE (BD-ROM)
PRIMARY VIDEO
TIME JUMP
v
v
v
v
v
v
You can move to a specific playback position by entering a time.
This is not possible if the specified time is not valid.
PRIMARY AUDIO
m
SECONDARY VIDEO
SLIDESHOW INTERVAL
CHANGE SECONDARY VIDEO
SECONDARY AUDIO
The following items can be set.
3SEC/5SEC/10SEC/20SEC/30SEC modes
m
SECONDARY AUDIO LANGUAGE
SLIDESHOW EFFECTS
m
m
m
The following items can be set.
SUBTITLE LANGUAGE
SUBTITLE STYLE
CHANGE ANGLE
Setting Values
Description
OFF
ON
Turns off slideshow effect.
Turns on slideshow effect. “Fade out” and
“Fade in” effects can be applied when
switching from one slide to another.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back
Video settings
m
PROGRESSIVE OUTPUT
The following items can be set.
Setting
Values
Description
8+&'1ꢀ5'66+0)
2+%674'ꢀ37#.+6;
014/#.
1((
AUTO1
Displays video images after they are
converted according to the film material.
&+)+6#.ꢀ01+5'ꢀ4'&7%6+10
241)4'55+8'ꢀ176276
#761ꢁ
AUTO2
In addition to the “AUTO1” option, support is
also provided for progressive videos recorded
at 30 frames per second.
VIDEO
Most suitable for video images (TV broadcast,
etc.). Select this option when playing videos
with significant movements or animated
videos.
m
PICTURE QUALITY
The following items can be set.
Setting Values
Description
NORMAL
CINEMA
FINE
Standard picture quality.
Effective when playing movies.
Produces sharp images with enhanced
outlines.
SOFT
Reduces noise that is prominent in the
video image.
USER
SETTING
Enables the Details setting. For more
details, refer to “DETAIL SETTING”.
m
DETAIL SETTING
The following items can be set.
Choose an option and press [OK] to set the respective values.
Setting Values
Description
CONTRAST
A value between “-7” and “+7” can be set.
BRIGHTNESS A value between “0” and “15” can be set.
SHARPNESS
COLOR
A value between “-6” and “+6” can be set.
A value between “-7” and “+7” can be set.
A value between “0” and “5” can be set.
GAMMA
m
DIGITAL NOISE REDUCTION
The following items can be set.
Setting
Values
Description
OFF
Turns off DNR (Digital Noise Reduction).
ON
Reduces noise that is prominent in images
of lengthy videos.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing
Before editing
This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing
them to the HDD.
Data on a finalized disc cannot be edited. To edit a finalized disc, you have to either unfinalize the disc, or do so after importing
the data to the HDD.
Memo:
v
Only discs that are finalized using this unit can be unfinalized.
Editable items for different media
Items that are editable vary according to the type of media on which the video data is stored. For details, refer to the media chart
below.
m
Media chart
Editing option
HDD
BD-R
(BDAV)
BD-RE
(BDAV)
DVD-RW/
DVD-R
SD
HDD/BD-
RE/SD
(picture)
Grouping
V
V
V
V
V
V
V
V
V
V
-
-
V
V
V
V
-
-
V
V
V
V
-
-
V
V
*1
*1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Changing the Title/Group Name
Deleting a Title/Group
Turning On Title/Group Protection
Turning Off Title/Group Protection
Creating a Playlist
V
V
-
-
Editing a Thumbnail
V
*2
-
V
*2
-
V
*1, *2
-
-
Editing a Chapter
-
Delete Scene
-
Dividing
-
-
-
-
Changing the Disc Name
Changing the Shooting Date/Time
V
-
V
-
V
-
-
V
-
Memo:
:
*1
Supports only the “VR MODE”.
:
*2
Supports only dividing and combining of chapters.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Entering characters
Entering Characters
1
Enter characters using the [0]-[9], [Z] or [#]
Names can be changed or given to stored videos or groups.
You can enter characters while referring to the input on the
monitor.
buttons
2
After character input is complete, press the
[YELLOW] button
Memo:
Character input screen
v
Switch between alphanumeric and symbol input by
pressing the [ w ] button.
v
v
For details on the correspondence between each button
and the input characters, refer to the “Character List”.
4'0#/'ꢎ6+6.'
Press the [ v ] button to delete an input character.
Press and hold down the [ v ] button to delete all input
characters.
4'0#/'ꢎ6*'ꢎ5'.'%6'&ꢎ6+6.'
ꢀꢁ!ꢂꢃ
IJKꢅ
CDEꢄ
LMNꢆ
FGHꢍ
OPQꢇ
24'8ꢀꢎ%*#4#%6'4
2#)'ꢎ248
v
Pressing the [RETURN] button calls up the confirmation
screen to cancel character input.
To cancel character input and return to the initial screen,
select “YES” and press the [OK] button.
To return to the character input screen, select “NO” and
press the [OK] button.
0':6ꢎ%*#4#%6'4
2#)'ꢎ0':6
RSTUꢈ
VWXꢉ
ꢊ
YZ[\ꢌ
ꢋ
%*#4#%6'4ꢎ6;2'
%.'#4
v
5'.'%6
126+10
Up to about 20 alphanumeric characters can be displayed
on the disc menu of BDMV and DVD-VIDEO. (The number
of characters that can be displayed varies with the
character.)
1-
4'6740
':+6
%10(+4/
+0(1ꢀ%144'%6
A Function name field
B Screen description
C Input window
Note:
v
If you switch the screen display before confirming the input
characters, a message will appear on the screen.
To cancel character input and proceed to switch the screen
display, select “YES” and press the [OK] button.
To return to the character input screen, select “NO” and
press the [OK] button.
Characters entered appear on the input window.
D Operation guide 1
The [0]-[9], [Z], [#], [PAGE PRV ], [w] and [v] buttons are
displayed.
v
If the converted characters exceed the maximum number of
input characters, a message will appear on the screen.
Select “OK” and press the [OK] button to delete the excess
characters and to input the remaining ones.
E Operation guide 2
[ J / K / H / I], [OK], [RETURN], [OPTION], [BLUE], [RED],
[GREEN] and [YELLOW] buttons are displayed.
Select “RETURN” and press the [OK] button to restore the
unconfirmed characters.
F Character input keyboard
v
No more characters can be input if the maximum character
limit has been reached.
A character input keyboard appears during input of symbol.
You can enter characters by selecting them accordingly from
the keyboard.
Character List
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[0]
[*]
.
a
d
g
j
,
!
A
D
T
J
1
B
E
G
K
N
P
U
W
_
-
(
ä
è
I
)
æ
é
ì
@
å
ê
í
/
à
ë
î
:
á
ð
ï
_
â
È
Ì
?
c
f
b
C
F
H
L
ã
É
Í
ç
Ê
Î
Æ
Ð
4
Ç
2
Ä
Ë
Ï
Å
À
Ô
;
Á
Õ
<
Â
Ñ
=
Ã
6
>
e
.
3
h
k
n
q
u
x
.
i
£
ö
R
ù
Y
5
ø
S
ú
Z
!
l
m
p
t
M
s
O
Q
V
X
/
ò
ÿ
û
ý
?
ó
ß
ü
þ
~
ô
$
Ù
Ý
(
õ
7
Ú
Þ
)
ñ
Ö
Ü
#
Ø
8
Ò
Ó
o
r
T
z
Û
9
*
v
y
@
-
w
0
,
*1
[
-
:
+
,
^
$
>
%
&
]
'
`
{
|
}
*1
.
~
!
?
:
*1 Single-byte space
:
*2 Press the [#] button to return to the previous input character.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
5
Select “GROUP”, and press the [OK] button
The selected titles and groups are now grouped together.
v
Grouping
Multiple titles stored on the HDD can be combined into a
group.
6+6.' ꢃ6*7/$0#+.ꢄ
0#8+)#6+10
8+&'1
2+%674'
4'/#+0 ꢀꢁꢀ
2CIG
Memo:
v
)4172
#..
Only video data stored on the HDD can be grouped.
)4172
6*'ꢂ5'.'%6'&ꢂ6+6.'5ꢂ9+..ꢂ$'ꢂ)4172'&ꢂ61)'6*'4
;17ꢂ%#0ꢂ/1&+(;ꢂ6*'ꢂ)4172ꢂ0#/'ꢂ(41/
̌'&+6ꢂ+0(1̍ꢂ70&'4ꢂ6*'ꢂ126+10ꢂ/'07
Grouping
)4172
$#%-
1
Press the [NAVIGATION] button on the remote
control unit
The Playback Navigation screen appears.
v
5'.'%6
126+10
24'8ꢂ2)
0':6ꢂ2)
':+6
1-
.+56
2+%674'
)4172
2
Select the titles or groups to be grouped, and
press the [MARK] button
Pressing the [MARK] button adds a check mark to the
selected titles/groups.
All titles and groups with the check mark will be grouped
together.
0#8+)#6+10
4'6740
v
Memo:
v
To cancel grouping, select “BACK” and press the [OK]
button.
v
Alternatively, you can press the [RETURN] button to cancel
grouping and return to the initial screen.
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
2+%674'
)4172
#..
Ungrouping
1
Press the [NAVIGATION] button on the remote
control unit
The Playback Navigation screen appears.
v
2
Select the group to ungroup, and press the
[OPTION] button
A pop-up option list appears.
v
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
3
Select “UNGROUP”, and press the [OK] button
An ungroup confirmation screen appears.
v
3
Press the [OPTION] button on the remote control
unit
A pop-up option list appears.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
v
$#%-
2.#;
4
)4172
#..
Select “GROUP”, and press the [OK] button
A grouping confirmation screen appears.
&'.'6'
&7$
v
001
002
003
004
008
70)4172
/1&'ꢂ%*#0)'
'&+6
6+6.'ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
VKVNG
126+105
'&+6ꢂ+0(1
16*'45
2+%674'
005
006
007
$#%-
2.#;
)4172
#..
&'.'6'
&7$
)4172
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
/1&'ꢀ%*#0)'
'&+6
4'6740
'&+6ꢀ+0(1
16*'45
Memo:
v
You cannot ungroup multiple groups at the same time.
When multiple groups are selected, the “UNGROUP” item
does not appear in the option list.
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
4
3
Select “YES”, and press the [OK] button
All titles within the selected group are ungrouped.
Press the [OPTION] button on the remote control
unit
A pop-up option list appears.
v
v
6+6.' ꢂ6*7/$0#+.ꢃ
0#8+)#6+10
8+&'1
4
Select “DO NOT GROUP”, and press the [OK]
button
A confirmation screen for group exclusion appears.
2+%674'
4'/#+0 ꢀꢁꢀ
2CIG
v
)4172
#..
5
70)4172
Select “YES”, and press the [OK] button
The selected titles are now excluded from the group.
6*'ꢄ5'.'%6'&ꢄ)4172ꢄ9+..ꢄ$'ꢄ70)4172'&
70)4172!
v
;'5
01
6+6.'ꢃ6*7/$0#+.ꢄ
0#8+)#6+10
8+&'1
2+%674'
4'/#+0 ꢀꢁꢀ
2CIG
)4172
#..
5'.'%6
126+10
1-
24'8ꢄ2)
0':6ꢄ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
&1ꢂ016ꢂ)4172
6*'ꢂ5'.'%6'&ꢂ6+6.'ꢃ5ꢄꢂ9+..ꢂ$'ꢂ4'/18'&ꢂ(41/ꢂ6*+5ꢂ)4172
4'/18'ꢂ(41/ꢂ)4172!
Memo:
;'5
01
v
To cancel ungrouping, select “NO” and press the [OK]
button.
v
Alternatively, you can press the [RETURN] button to cancel
ungrouping and return to the initial screen.
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
Memo:
Excluding from a group
v
To cancel, select “NO” and press the [OK] button.
You can select titles and exclude them from a group.
v
Alternatively, you can press the [RETURN] button to cancel
group exclusion and return to the initial screen.
1
Press the [NAVIGATION] button on the remote
control unit
v
The Playback Navigation screen appears.
2
Select the titles to exclude from the group, and
press the [MARK] button
Pressing the [MARK] button adds a check mark to the
selected titles/groups.
v
All titles with the check mark will be excluded from the
group.
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
2+%674'
)4172
#..
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Changing the Title/Group
Name
Deleting a Title/Group
Titles/groups can be deleted. When you delete a group, all
titles contained within the group are deleted.
The saved title/group name can be changed as follows.
Memo:
Memo:
v
When a title/group is deleted from the HDD, BD-RE, or
v
A title/group name can be added to video data stored on
DVD-RW, the remaining space on the media increases
according to the size of the deleted title/group.
Deleting a title/group from a BD-R or DVD-R does not
increase the amount of available space on the disc.
the HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the
name can be changed.
v
Video data stored on a DVD-RW or DVD-R in the Video
mode cannot be changed.
1
Press the [NAVIGATION] button on the remote
control unit
1
Press the [NAVIGATION] button on the remote
control unit
v
The Playback Navigation screen appears.
v
The Playback Navigation screen appears.
2
Select the titles/groups to delete, and press the
[OPTION] button
2
Select the title/group for which the name is to be
changed, and press the [OPTION] button
v
A pop-up option list appears.
v
A pop-up option list appears.
3
Select “DELETE”, and press the [OK] button
3
Select “EDIT INFO”, and press the [OK] button
v
A confirmation screen for title/group deletion appears.
v
An information editing screen appears.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
6+6.' ꢀ6*7/$0#+.ꢁ
2+%674'
0#8+)#6+10
8+&'1
126+105
$#%-
2+%674'
2.#;
$#%-
)4172
#..
&'.'6'
&7$
2.#;
)4172
#..
&'.'6'
&7$
001
002
003
004
008
/1&'ꢂ%*#0)'
'&+6
001
002
003
004
008
/1&'ꢂ%*#0)'
'&+6
'&+6ꢂ+0(1
VKVNG
16*'45
'&+6ꢂ+0(1
16*'45
005
006
007
VKVNG
005
006
007
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
4
Select “DELETE”, and press the [OK] button
The selected titles/groups are deleted.
4
Select “MODIFY TITLE NAME” or “MODIFY
GROUP NAME”, and press the [OK] button
A title/group name modifying screen appears.
v
v
6+6.'ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
)4172
#..
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
001
&'.'6'
)4172
#..
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
&1ꢀ;17ꢀ9#06ꢀ61ꢀ&'.'6'!
001
0
004
008
VKVNG
&'.'6'
$#%-
005
/1&+(;ꢀ6*7/$0#+.
VKVNG
%*#0)'ꢀ5*116+0)ꢀ'ꢅ6+/'
2416'%6
005
0
5'.'%6
':+6
1-
24'8ꢀ2)
0':6ꢀ2)
.+56
2+%674'
)4172
0#8+)#6+10
126+10
4'6740
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
Memo:
v
To cancel the title/group deletion operation, select “BACK”
and press the [OK] button.
5
Modify the title/group name
The modified title/group name is now saved.
v
v
Alternatively, you can press the [RETURN] button to cancel
the deletion operation and return to the initial screen.
Memo:
v
For details on the method of character input, refer to
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
4
Select “PROTECT”, and press the [OK] button
If only a single title was selected in step 2, a confirmation
screen for title protection will appear.
v
Turning On Title/Group
Protection
6+6.' ꢂ6*7/$0#+.ꢃ
0#8+)#6+10
8+&'1
Titles/groups can be protected.
2+%674'
4'/#+0 ꢀꢁꢀ
Editing and deletion cannot be performed on protected titles/
2CIG
groups.
)4172
#..
v
Title/group protection can be turned on for video data
2416'%6
stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and
DVD-RW (VR).
6*'ꢄ5'.'%6'&ꢄ6+6.'ꢄ9+..ꢄ$'ꢄ2416'%6'&
&1ꢄ;17ꢄ9#06ꢄ61ꢄ5'6ꢄ2416'%6+10!
;'5
01
1
Press the [NAVIGATION] button on the remote
control unit
The Playback Navigation screen appears.
v
5'.'%6
126+10
2
1-
Select the titles/groups to be protected, and
press the [OPTION] button
A pop-up option list appears.
24'8ꢄ2)
0':6ꢄ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
v
v
If multiple titles or groups were selected in step 2,
“PROTECT” and “UNPROTECT” items will be displayed.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
5
Select “YES” or “PROTECT”, and press the [OK]
button
The selected titles/groups are now protected.
$#%-
2.#;
)4172
#..
&'.'6'
&7$
v
001
002
003
004
008
/1&'ꢂ%*#0)'
'&+6
Memo:
v
All selected titles and groups will be protected when
'&+6ꢂ+0(1
16*'45
VKVNG
multiple titles or groups are selected.
005
006
007
v
v
To turn off the title/group protection, select “NO” and press
the [OK] button.
Alternatively, you can press the [RETURN] button to turn
off the protection and return to the initial screen.
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
3
Select “EDIT INFO”, and press the [OK] button
An information editing screen appears.
v
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
)4172
#..
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
001
0
004
008
/1&+(;ꢀ6*7/$0#+.
VKVNG
%*#0)'ꢀ5*116+0)ꢀ'ꢅ6+/'
2416'%6
005
0
5'.'%6
126+10
1-
':+6
.+56
2+%674'
)4172
24'8ꢀ2)
0':6ꢀ2)
0#8+)#6+10
4'6740
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
4
Select “UNPROTECT”, and press the [OK] button
If only a single title was selected in step 2, a confirmation
screen for turning off protection will appear.
v
Turning Off Title/Group
Protection
6+6.' ꢃ6*7/$0#+.ꢄ
0#8+)#6+10
8+&'1
Protection of a title/group can be turned off.
Titles/groups can be edited and deleted after their protection
is turned off.
2+%674'
(4''ꢂ52#%' ꢀꢁꢀ
2CIG
)4172
#..
v
Title/group protection can be turned off for video data
702416'%6
::ꢂ6+6.'5ꢂ*#8'ꢂ$''0ꢂ5'.'%6'&ꢂ61ꢂ4'/18'ꢂ6*'ꢂ2416'%6+10
stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and
DVD-RW (VR).
;'5
01
1
Press the [NAVIGATION] button on the remote
control unit
The Playback Navigation screen appears.
v
5'.'%6
126+10
2
1-
Select the titles/groups to turn off protection for,
and press the [OPTION] button
A pop-up option list appears.
24'8ꢂ2)
0':6ꢂ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
v
v
If multiple titles or groups were selected in step 2,
“UNPROTECT” and “PROTECT” items will be displayed.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
5
Select “YES”, and press the [OK] button
Protection of the selected titles/groups is now turned off.
$#%-
v
2.#;
)4172
#..
&'.'6'
&7$
Memo:
001
002
003
004
008
/1&'ꢂ%*#0)'
'&+6
v
Protection will be turned off from all selected titles and
groups when multiple titles or groups are selected.
'&+6ꢂ+0(1
16*'45
VKVNG
v
v
If you do not want to turn off the title/group protection,
select “NO” and press the [OK] button.
005
006
007
Alternatively, you can press the [RETURN] button to cancel
protection removal and return to the initial screen.
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
3
Select “EDIT INFO”, and press the [OK] button
An information editing screen appears.
v
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
)4172
#..
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
001
0
004
008
/1&+(;ꢀ6*7/$0#+.
VKVNG
%*#0)'ꢀ5*116+0)ꢀ'ꢅ6+/'
702416'%6
005
0
5'.'%6
126+10
1-
':+6
.+56
2+%674'
)4172
24'8ꢀ2)
0':6ꢀ2)
0#8+)#6+10
4'6740
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
5
Edit the playlist accordingly by selecting
chapters from the source title according to your
preference
Edit the playlist.
For details, refer to “Editing the playlist”.
Creating a Playlist
A playlist can be created from the video titles on the HDD.
v
v
Playlists can only be created for titles that are stored on the
HDD.
:
Playlist
Enables you to create a program by selecting
chapters from a specific title and editing their
playback sequence.
2.#;.+56ꢃ'&+6
5#8'ꢃ2.#;.+56
'&+6ꢃ2.#;.+56
5174%'ꢃ6+6.'
2CIG
Memo:
v
The playlist created comes in handy during playback and
dubbing to a disc.
ꢀꢀꢁ ꢀꢂꢀꢀꢂꢀꢀ
2CIG
6#4)'6ꢃ2.#;.+56
Creating a Playlist
ꢀꢀꢁ ꢀꢂꢀꢀꢂꢀꢀ
1
Press the [NAVIGATION] button on the remote
control unit
5'.'%6
126+10
1-
24'8ꢃ2)
0':6ꢃ2)
':+6
'&+6
5#8'
4'6740
v
The Playback Navigation screen appears.
6
2
Press the [YELLOW] button on the remote
control unit
A playlist is created.
Select the title for which a playlist is to be
created, and press the [OPTION] button
v
3
Select “EDIT”, and press the [OK] button
The Edit menu screen appears.
v
Editing the playlist
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
m
2+%674'
Chapter insertion
$#%-
2.#;
① Select the chapter to insert from the thumbnails of
the “SOURCE TITLE”, and press the [OK] button
② Select the position to insert the chapter from the
“TARGET PLAYLIST”, and press the [OK] button
)4172
#..
&'.'6'
&7$
001
002
003
004
008
&1ꢂ016ꢂ)4172
/1&'ꢂ%*#0)'
'&+6
VKVNG
'&+6ꢂ+0(1
16*'45
m
005
006
007
Chapter deletion
① Select the chapter to delete from the thumbnails of
the “TARGET PLAYLIST”, and press the [OK] button
② Select “DELETE”, and press the [OK] button
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
m
Entering the playlist name
4
Select “PLAYLIST EDIT”, and press the [OK]
button
The playlist edit screen appears.
① Select “TARGET PLAYLIST”, and press the [OK]
button.
v
② Enter a playlist name, and press the [OK] button
Memo:
6+6.' ꢁ6*7/$0#+.ꢂ
v
0#8+)#6+10
8+&'1
For details on the method of character input, refer to
4'/#+0 ꢃꢄꢃ
2+%674'
“Entering Characters”.
2CIG
Note:
)4172
#..
'&+6
v
Deleting the original title list will cause the playlist to be
deleted as well.
Editing the original title list, or changing the recording mode
may cause the playlist to be deleted.
001
0
004
008
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
&'.'6'ꢀ5%'0'
VKVNG
005
0
&+8+&'
5'.'%6
126+10
1-
4'6740
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
4
Select “CHANGE”, and press the [OK] button
The displayed still image now becomes the thumbnail
image.
v
Editing a Thumbnail
Thumbnails (index images) can be changed to a still image
according to your preference.
5
Select “CONFIRM”, and press the [OK] button
Doing so ends the editing of thumbnails.
v
Memo:
v
Thumbnails of titles stored on the HDD, BD-RE, BD-R,
Memo:
v
DVD-RW, and DVD-R can be edited.
You can also display the thumbnail modification screen
from the Playback Navigation screen.
v
However, thumbnails of titles that are stored on an SD card
or finalized disc cannot be edited.
① Select the title for which the thumbnail is to be
changed, and press the [OPTION] button
1
Press the [INFORMATION CORRECT] button on
the remote control unit
An information editing screen appears.
② Select “EDIT INFO”, and press the [OK] button
v
An information editing screen appears.
v
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
$#%-
2.#;
)4172
#..
&'.'6'
&7$
001
002
003
004
008
+0(14/#6+10ꢀ%144'%6
/1&'ꢂ%*#0)'
'&+6
/1&+(;ꢀ6+6.'ꢀ0#/'
/1&+(;ꢀ6*7/$0#+.
%*#0)'ꢀ5*116+0)ꢀ'ꢁ6+/'
2416'%6
'&+6ꢂ+0(1
16*'45
VKVNG
005
006
007
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
③ Select “MODIFY THUMBNAIL”, and press the [OK]
2
Select “MODIFY THUMBNAIL”, and press the
[OK] button
A thumbnail modification screen appears.
button
v
A thumbnail modification screen appears.
v
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
3
Play the video, and press the [W] button to stop
at the scene you want to use as thumbnail
display
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
)4172
#..
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
001
0
004
008
/1&+(;ꢃ6*7/$0#+.
/1&+(;ꢀ6*7/$0#+.
;17ꢃ%#0ꢃ%*#0)'ꢃ6*'ꢃ6+6.'ꢃ6*7/$0#+.5
;17ꢃ%#0ꢃ'&+6ꢃ6*'ꢃ6+6.'ꢃ61ꢃ8+'9ꢃ$;ꢃ%*#26'45
VKVNG
%*#0)'ꢀ5*116+0)ꢀ'ꢅ6+/'
2416'%6
005
0
ꢀꢁꢀꢀꢁꢀꢀ
%*#0)'
%10(+4/
5'.'%6
126+10
1-
':+6
.+56
2+%674'
)4172
24'8ꢀ2)
0':6ꢀ2)
0#8+)#6+10
4'6740
6*7/$0#+.
- : -- : --
5'.'%6
1-
':+6
+0(1ꢂ%144'%6
126+10
4'6740
Memo:
v
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing a chapter
Editing a Chapter
1
Press the [EDIT] button on the remote control
unit
The Edit menu screen appears.
Creating a chapter mark for a saved title enables you to find a
specific scene within the title.
v
Memo:
2
v
Select “CHAPTER EDIT”, and press the [OK]
button
The title screen appears.
All chapter editing functions can be performed on titles
stored on the HDD.
v
Titles stored on a BD-RE (BDAV), BD-R (BDAV), DVD-R
(VR), or DVD-RW (VR) only allow chapters to be divided or
combined.
v
The chapters of titles that are stored on an SD card or
finalized disc cannot be edited.
v
'&+6
Also, protected titles cannot be edited. To perform chapter
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
edit of a title, turn off the protection.
&'.'6'ꢀ5%'0'
&+8+&'
Chapter edit functions
v
Chapter mark insertion (divide chapter)
Divides a chapter by inserting a chapter mark.
v
3
Select a title, and press the [OK] button
Chapter mark deletion (combine chapters)
Memo:
Combine chapters by deleting the chapter mark.
v
The chapter edit screen can also be called up from the
v
Chapter deletion
Playback Navigation screen.
Deletes a specified chapter.
① Select the title to perform chapter edit, and press the
[OPTION] button
② Select “EDIT”, and press the [OK] button
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
$#%-
2.#;
)4172
#..
&'.'6'
&7$
001
002
003
004
008
&1ꢂ016ꢂ)4172
/1&'ꢂ%*#0)'
'&+6
VKVNG
'&+6ꢂ+0(1
16*'45
005
006
007
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
③ Select “CHAPTER EDIT”, and press the [OK] button
6+6.'ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
2CIG
)4172
#..
'&+6
001
0
004
008
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
&'.'6'ꢀ5%'0'
VKVNG
005
0
&+8+&'
5'.'%6
126+10
1-
4'6740
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
v
v
Frame movement on the Chapter Edit screen can only be
performed one frame at a time regardless of the “STILL
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
m
Deleting a video chapter
Editing a Chapter
(Continued)
1
Select the chapter for which you want to delete
the video from the chapter edit screen
2
Press the [DELETE] button on the remote control
unit
A confirmation screen for deleting the chapter appears.
m
Chapter mark insertion (divide chapter)
1
Play the video, and press the [W] button to stop
at the scene you want to add a chapter mark
v
2
Press the [MARK] button on the remote control
unit
A chapter mark is inserted into the paused scene.
%
%
*
*
#
#
2
266''4ꢀ4'ꢀ&'+&6+6
;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
2CIG
v
%*#26'4ꢀ'&+6
%*
*
#
#
2
266''4ꢀ4'ꢀ&'+&6+6
6*'ꢀ52'%+(+'&ꢀ%*#26'4ꢀ9+..ꢀ$'ꢀ&'.'6'&
&'.'6'&ꢀ#ꢀ%#0016ꢀ$'ꢀ4'5614'&
;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
2CIG
&'.'6'
%#0%'.
%10(+4/
001
0 : 00 : 00
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
'&+6
4'6740
3
Select “DELETE”, and press the [OK] button
The selected video chapter is deleted.
001
0 : 00 : 00
v
5'.'%6
126+10
':+6
'&+6
1-
24'8ꢀ2)
24'8ꢀ2)
0':6ꢀ2)
4'6740
Note:
v
Videos cannot be restored once they are deleted.
Memo:
v
Deletion of the video may fail if the length of the chapter is
too short.
v
The chapter is now divided into two parts at the position of
the chapter mark.
m
Chapter mark deletion (combine chapters)
Chapter options
Pressing the [OPTION] button on the remote control when the
Chapter Edit screen is displayed enables you to perform the
following editing operations.
1
Play the video, and press the [W] and [ H / I ]
buttons to display the scene for which you want
to delete the chapter mark
2
Press the [MARK] button on the remote control
unit
A confirmation screen for deleting the chapter mark
appears.
m
Combining with previous chapter
Combines the selected chapter with the previous chapter.
v
v
① Select a chapter, followed by “COMB. W/PREV CH”,
and press the [OK] button
Combines chapters.
v
%*#26'4ꢀ'&+6
;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
m
2CIG
Combining with next chapter
Combines the selected chapter with the next chapter.
v
%*#26'4ꢀ'&+6
① Select a chapter, followed by “COMB. W/NEXT CH”,
%*#26'4ꢀ/#4-ꢀ#.4'#&;ꢀ':+565ꢁ
&1ꢀ;17ꢀ9#06ꢀ61ꢀ&'.'6'ꢀ6*'
':+56+0)ꢀ%*#26'4ꢀ/#4-!
and press the [OK] button
Combines chapters.
v
;'5
01
m
Combining all chapters
Combines all chapters.
v
001
0 : 00 : 00
5'.'%6
126+10
1-
24'8ꢀ2)
0':6ꢀ2)
':+6
'&+6
① Select “COMB. ALL CHAP.”, and press the [OK]
4'6740
button
v
A confirmation screen for combining all the chapters is
3
Select “YES”, and press the [OK] button
displayed.
v
The chapter mark is deleted from the selected scene.
② Select “YES”, and press the [OK] button
Combines all the chapters.
v
Memo:
v
The chapters before and after the position of the chapter
mark are now combined.
v
Pressing the [T / S] button displays the next/previous
page.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
6
Select “EXECUTE”, and press the [OK] button
A confirmation screen for performing dividing appears.
v
Dividing
You can select a saved title and divide it into two titles.
&+8+&'
Memo:
v
;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'
'&+6ꢀ6*'ꢀ6+ .'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
Dividing can only be applied to titles stored on the HDD.
v
Titles that are protected cannot be divided. To divide a title,
turn off the protection.
&+8+&+0)ꢀ21+06
':'%76'
14+)+0#.
&+8+&+0)ꢀ21+06
Dividing
001
0 : 00 : 00
- : -- : --
5'.'%6
':+6
1-
4'6740
1
Press the [EDIT] button on the remote control
unit
The Edit menu screen appears.
'&+6
126+10
v
7
Select “DIVIDE”, and press the [OK] button
Dividing starts.
2
Select “DIVIDE”, and press the [OK] button
The title screen appears.
v
v
&+8+&'
;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'
'&+6ꢀ6*'ꢀ6+ .'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
&+8+&'
'&+6
70#$.'ꢀ61ꢀ4'5614'ꢀ6*'ꢀ14+)+0#.ꢀ#ꢀ10%'ꢀ+6ꢀ+5ꢀ&+8+&'&ꢁ
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
&1ꢀ;17ꢀ9#06ꢀ61ꢀ&+8+&'!
&+8+&'
%#0%'.
&'.'6'ꢀ5%'0'
&+8+&'
14+)+0#.
&+8+&+0)ꢀ21+06
001
0 : 00 : 00
- : -- : --
5'.'%6
':+6
'&+6
1-
4'6740
126+10
3
4
Select a title, and press the [OK] button
Play the video, and press the [W] button at the
scene where you want to perform dividing
5
Select “DIVIDING POINT”, and press the [OK]
button
&+8+&'
;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'
;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45
&+8+&+0)ꢀ21+06
':'%76'
14+)+0#.
&+8+&+0)ꢀ21+06
001
0 : 00 : 00
- : -- : --
5'.'%6
126+10
1-
4'6740
':+6
'&+6
Memo:
v
v
Frame movement on the Chapter Edit screen can only be
performed one frame at a time regardless of the “STILL
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Dividing (Continued)
Delete Scenes
Unwanted scenes of a saved title can be deleted.
Memo:
v
To cancel the dividing operation, select “CANCEL” and
Doing so helps to increase the free space on the disc.
press the [OK] button.
Memo:
v
v
Alternatively, you can press the [RETURN] button to cancel
Deleting scenes can only be applied to titles stored on the
the divide operation and return to the initial screen.
HDD.
v
v
The dividing edit screen can also be called up from the
Titles that are protected cannot be deleted. To enable
Playback Navigation screen.
scene delete of a title, turn off the protection.
① Select the titles to divide, and press the [OPTION]
button
v
② Select “EDIT”, and press the [OK] button
HD content for which the delete scene operation has been
applied cannot be dubbed to BDMV. Perform seamless
conversion before starting a dubbing operation.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
2+%674'
$#%-
2.#;
)4172
#..
&'.'6'
&7$
001
002
003
004
008
&1ꢂ016ꢂ)4172
/1&'ꢂ%*#0)'
'&+6
Delete Scenes
1
Press the [EDIT] button on the remote control
unit
The Edit menu screen appears.
VKVNG
'&+6ꢂ+0(1
16*'45
005
006
007
v
2
Select “DELETE SCENE”, and press the [OK]
button
Displays the Title Display screen.
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
4'6740
v
③ Select “DIVIDE”, and press the [OK] button
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
'&+6
2CIG
)4172
#..
'&+6
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
001
0
004
008
%*#26'4ꢀ'&+6
2.#;.+56ꢀ'&+6
&'.'6'ꢀ5%'0'
&'.'6'ꢀ5%'0'
&+8+&'
VKVNG
005
0
&+8+&'
5'.'%6
126+10
1-
4'6740
24'8ꢀ2)
0':6ꢀ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
3
4
Select a title, and press the [OK] button
Edit the delete scene section
Follow the steps below to edit the section for which delete
scene is to be applied.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
5
Select “EXECUTE”, and press the [OK] button
A confirmation screen for performing scene delete appears.
① Play the video, and press the [W] button at the point
where you want to start the delete operation
② Select “START”, and press the [OK] button
v
6
Select “EXECUTE”, and press the [OK] button
Scene deletion starts.
v
&'.'6'ꢂ5%'0'
;17ꢂ%#0ꢂ&'.'6'ꢂ5%'0'5
ꢀꢁꢀꢀꢁꢀꢀ
&'.'6'ꢃ5%'0'
;17ꢃ%#0ꢃ&'.'6'ꢃ5%'0'5
56#46
'0&
ꢀꢁꢀꢀꢁꢀꢂ
0':6
&'.'6'ꢃ5%'0'
':'%76'
6*'ꢃ52'%+(+'&ꢃ5'%6+10ꢃꢄ::ꢃ5')/'06ꢄ5ꢅꢅꢃ9+..ꢃ$'ꢃ&'.'6'&
':'%76'
56#46
%#0%'.
56#46
'0&
- : -- : --
- : -- : --
'0&
5'.'%6
126+10
1-
4'6740
':+6
'&+6
001
0 : 00 : 00
001
1-
4'6740
0 : 00 : 09
5'.'%6
126+10
':+6
'&+6
③ Play the video, and press the [W] button at the point
where you want to end the delete operation
④ Select “END”, and press the [OK] button
Memo:
v
To cancel the delete scene operation, select “CANCEL”
and press the [OK] button.
&'.'6'ꢃ5%'0'
;17ꢃ%#0ꢃ&'.'6'ꢃ5%'0'5
ꢀꢁꢀꢀꢁꢀꢂ
v
Alternatively, you can press the [RETURN] button to cancel
delete scene and return to the initial screen.
56#46
'0&
0':6
':'%76'
56#46
'0&
001
0 : 00 : 03
- : -- : --
5'.'%6
126+10
1-
4'6740
':+6
'&+6
⑤ To continue specifying other sections to delete,
select “NEXT”, and press the [OK] button
&'.'6'ꢄ5%'0'
;17ꢄ%#0ꢄ&'.'6'ꢄ5%'0'5
ꢀꢁꢀꢀꢁꢂꢃ
56#46
'0&
0':6
':'%76'
56#46
'0&
001
0 : 00 : 03
001
1-
4'6740
0 : 00 : 17
5'.'%6
126+10
':+6
'&+6
⑥ Repeat Steps 1 to 4 to specify the sections to delete
Memo:
v
v
Frame movement on the Chapter Edit screen can only be
performed one frame at a time regardless of the “STILL
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Changing the Disc Name
Changing the Shooting
Date/Time
The name of a BD or DVD disc can be changed as follows.
1
Set the BD or DVD for which the disc name is to
be changed on the disc tray
The date/time of the stored video can be changed as follows.
v
The shooting date/time of videos stored on the HDD can be
changed.
2
Press the [MEDIA MANAGE] button on the
remote control unit
1
Press the [INFORMATION CORRECT] button on
the remote control unit
v
The Media Management menu screen appears.
v
An information correct screen appears.
/'&+#ꢀ/#0#)'/'06
$&ꢁ&8&
(14/#6
(+0#.+<'
4'0#/'ꢀ&+5%
5&ꢀ%#4&
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
/1&+(;ꢀ6*7/$0#+.
%*#0)'ꢀ5*116+0)ꢀ'ꢁ6+/'
2416'%6
(14/#6
$&ꢂ8+&'1ꢀ#ꢀ'4#5'
*&&
(14/#6
3
Select “RENAME DISC” under “BD/DVD”, and
press the [OK] button
A disc name modification screen appears.
2
Select “CHANGE SHOOTING DATE/TIME”, and
press the [OK] button
A thumbnail screen appears.
v
v
4'0#/'ꢎ&+5%
3
Select the title for which the shooting date/time
is to be changed, and press the [OK] button
The screen for changing the shooting date/time appears.
2.'#5'ꢎ4'0#/'ꢎ6*'ꢎ&+5%
v
ꢀꢁ!ꢂꢃ
IJKꢅ
CDEꢄ
LMNꢆ
FGHꢍ
OPQꢇ
24'8ꢀꢎ%*#4#%6'4
2#)'ꢎ248
4
Change the shooting date/time
Perform the following steps to change the shooting date/
time.
0':6ꢎ%*#4#%6'4
2#)'ꢎ0':6
v
RSTUꢈ
VWXꢉ
ꢊ
YZ[\ꢌ
ꢋ
%*#4#%6'4ꢎ6;2'
%.'#4
6+6.' ꢄ6*7/$0#+.ꢅ
+0(1ꢀꢁ%144'%6
8+&'1
2+%674'
4'/#+0 ꢂꢃꢂ
5'.'%6
126+10
2CIG
1-
4'6740
':+6
%10(+4/
/'&+#ꢎ/#0#)'
)4172
#..
%*#0)'ꢁ5*116+0)ꢁ'ꢉ6+/'
;'#4
/106*ꢉ&#;
6+/'
ꢂꢆꢆꢇ
,#0ꢉꢆꢊ
ꢃꢈꢂꢂ
4
Modifying the Disc Name
The new disc name is now saved.
v
'06'4
Memo:
v
For details on the method of character input, refer to
5'.'%6
126+10
1-
24'8ꢁ2)
0':6ꢁ2)
':+6
.+56
2+%674'
)4172
+0(1ꢀꢁ%144'%6
4'6740
① Use the [ J ] and [ K ] buttons to move the cursor to
the item you want to change
② Press the [OK] button to display the pop-up screen
③ Use the [ J ] and [ K ] buttons to select a desired
value
④ Press the [OK] button to choose the value
⑤ Repeat Steps 1 to 4 to change settings for any
desired items
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
5
Select “ENTER”, and press the [OK] button
The modified shooting date/time is saved.
v
Mode conversion
Memo:
You can convert HD quality video titles saved on the HDD if
they are recorded in the DR, AVC, AF, AN, AL, or AE mode.
v
Alternatively, you can press the [RETURN] button to cancel
the shooting date/time modification and return to the initial
screen.
:
Seamless
conversion
Seamless conversion can be performed to
enable smooth playback of joined scenes
after dubbing to a BD. (Titles recorded in
the DR recording mode h seamless)
v
v
The shooting date/time modification will not be reflected on
a title that was dubbed.
Pressing the [OPTION] button in the playback navigation
screen instead of the [INFORMATION CORRECT] button
will also display the shooting date/time edit screen.
:
Recording
mode
conversion
Enables conversion of recording mode.
(Titles recorded in the DR, AVC, AF, AN,
AL, or AE mode hAF/AN/AL/AE/XP/SP/LP/
EP)
① Select the title for which the shooting date/time is to
be changed, and press the [OPTION] button
② Select “EDIT INFO”, and press the [OK] button
Memo:
v
As seamless conversion does not re-encode video and
audio, there is no deterioration in the image quality.
6+6.' ꢀ6*7/$0#+.ꢁ
0#8+)#6+10
8+&'1
126+105
v
v
v
2+%674'
Re-encoding is performed during recording mode
conversion.
$#%-
2.#;
)4172
#..
&'.'6'
&7$
Only titles that are recorded in the DR mode enable
conversion to the XP/SP/LP/EP mode.
001
002
003
004
008
/1&'ꢂ%*#0)'
'&+6
To apply “MODE CHANGE” after turning off the power,
select “AFTER POWER OFF” for “START METHOD” under
the “MODE CHANGE”.
'&+6ꢂ+0(1
16*'45
VKVNG
005
006
007
Note:
v
When seamless conversion is performed, the chapters
5'.'%6
126+10
1-
24'8ꢂ2)
0':6ꢂ2)
':+6
0#8+)#6+10
.+56
2+%674'
)4172
(excluding joints of scenes) will be combined. To divide the
chapters, insert chapter marks after seamless conversion.
4'6740
③ Select “CHANGE SHOOTING DATE/TIME”, and
press the [OK] button
1
2
Press the [NAVIGATION] button on the remote
control
6+6.' ꢁ6*7/$0#+.ꢂ
0#8+)#6+10
8+&'1
4'/#+0 ꢃꢄꢃ
2+%674'
Select a title/group, and press the [OPTION]
button
2CIG
)4172
#..
+0(14/#6+10ꢀ%144'%6
/1&+(;ꢀ6+6.'ꢀ0#/'
3
Select “MODE CHANGE” from the Option menu,
and press the [OK] button
The “MODE CHANGE” screen appears.
001
0
004
008
/1&+(;ꢀ6*7/$0#+.
v
VKVNG
%*#0)'ꢀ5*116+0)ꢀ'ꢅ6+/'
005
0
2416'%6
6+6.' ꢂ6*7/$0#+.ꢃ
0#8+)#6+10
8+&'1
ꢀꢁꢀ
4'/#+0
2+%674'
2CIG
5'.'%6
126+10
1-
':+6
.+56
2+%674'
)4172
24'8ꢀ2)
0':6ꢀ2)
)4172
#..
0#8+)#6+10
4'6740
/1&'ꢄ%*#0)'
/1&'
56#46ꢄ/'6*1&
5'#/.'55
+//'&+#6'
%10(+4/
5'.'%6
126+10
1-
24'8ꢄ2)
0':6ꢄ2)
':+6
.+56
2+%674'
)4172
0#8+)#6+10
4'6740
4
5
Select a recording mode from “MODE CHANGE”,
and press the [OK] button
Select “CONFIRM”, and press the [OK] button
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
Memo:
Changing Settings of this
Unit
Settings changed in the Settings Menu screen are stored on
this unit even when its power is turned off.
Displaying the Settings Menu
1
Press the [SET UP] button on the remote control
unit
v
The Settings Menu screen appears.
Memo:
v
When playback is in progress, pressing the button stops it
and displays the Settings Menu screen.
v
The cursor position appears at the position when the
screen was last closed.
Setting Menu List
The following items can be set. Items that cannot be set
cannot be selected.
v
The highlighted value is the default setting.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
SETUP
v
CLOCK SET
Sets the current date and time.
Memo:
v
5'672
#761ꢀ219'4ꢀꢃ1((ꢄ
1((
v
4'/16'ꢀ%10641.ꢀ%1&'
%.1%-ꢀ5'6ꢁ&+52.#;
2#0'.ꢀ&+52.#;ꢀ$4+)*60'55
37+%-ꢀ56#4672
4'/16'ꢀ%10641.ꢀꢂ
DATE DISPLAY
For setting the date (year, month, and day) display format.
1((
Setting Values
Description
$7<<'4ꢀ176276
&'(#7.6ꢀ5'66+0)
YEAR.MONTH.DAY Displays the date in the year/month/
day order.
MONTH.DAY.YEAR Displays the date in the month/day/
year order.
5'.'%6
':+6
1-
4'6740
5'672
DAY.MONTH.YEAR Displays the date in the day/month/
year order.
m
AUTO POWER (OFF)
You can specify a time for the power of the unit to turn off
automatically when it is not being operated.
v
TIME DISPLAY CHOICE
For setting the time display format.
Setting Values
Description
Setting Values
Description
OFF
Power does not turn off automatically.
Turns off power after two hours.
Turns off power after six hours.
12H
24H
Displays the time in AM/PM format.
Displays the time in 24-hour format.
2 HOURS
6 HOURS
m
PANEL DISPLAY BRIGHTNESS
m
REMOTE CONTROL CODE
The brightness of the display window can be specified using
the “DIMMER (POWER ON)”, and “DIMMER (POWER OFF)”
control items.
For remote control units compliant with JVC’s products,
different remote control codes can be specified for those that
are used with this unit.
v
DIMMER (POWER ON)
For setting the brightness of the display window when the
power is turned “On”.
Setting Values
Description
REMOTE CONTROL 1 Sets remote control code to 1.
REMOTE CONTROL 2 Sets remote control code to 2.
REMOTE CONTROL 3 Sets remote control code to 3.
REMOTE CONTROL 4 Sets remote control code to 4.
Setting Values Description
BRIGHT
DIMMED1
DIMMED2
DIMMED3
OFF
Bright
Slightly dim
Dim
m
CLOCK SET/DISPLAY
The current date/time and the display format on the screen
can be specified using the “CLOCK SET”, “DATE DISPLAY”,
and “TIME DISPLAY CHOICE” items.
Dimmer
Off
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
v
DIMMER (POWER OFF)
PLAYBACK SETTING
For turning on/off the light of the display window when the
power is turned “Off”.
Setting Values
Description
2.#;$#%-ꢀ5'66+0)
OFF
ON
Turns off the light.
Turns on the light.
$&ꢁꢂ&8&ꢁ8+&'1ꢀ2$ꢀ5'66+0)
4'57/'
10
#761
10
56+..ꢀ/1&'
5'#/.'55ꢀ2.#;$#%-
m
QUICK STARTUP
The quick startup setting can be specified as follows.
Setting
Values
Description
5'.'%6
':+6
1-
5'672
OFF
Starts up in the normal way.
4'6740
ON
Operation is speedily enabled after turning
on the power. (Quick start)
m
BD-/DVD-VIDEO PB SETTING
BD-Video and DVD-Video playback settings can be specified
using the “BD-VIDEO RATINGS”, “COUNTRY CODE”,
“AUDIO LANGUAGE”, “SUBTITLE LANGUAGE”, and “MENU
LANGUAGE” items.
Memo:
v
Setting to “ON” increases power consumption while the unit
is in the standby mode.
v
BD-VIDEO RATINGS
m
BUZZER OUTPUT
For setting the lower age limit for BD-Video ratings.
The buzzer setting can be specified as follows.
Setting Values
Description
v
REMOTE CONTROL SENSOR TONE
NO LIMIT
All BD-Videos can be viewed.
For setting whether to sound the buzzer when the remote
control sensor receives signals.
254YEAR(S)-
0YEAR(S)
BD-Videos that are subject to the age
limit cannot be viewed.
Setting
Values
Description
Memo:
OFF
Buzzer does not sound when the remote
control sensor receives signals.
v
In order to set the restrictions, password (four-digit
number) registration is required.
v
The password status becomes unregistered if the
restriction setting is disabled. A new password can be
registered after setting the age limit again.
ON
Sounds the buzzer when the remote control
sensor receives signals.
v
ALERT/WARNING TONE
v
v
It is recommended that you note down the password in
case it is lost or forgotten.
For setting whether to sound the buzzer when an operation is
completed or when a warning message appears.
COUNTRY CODE
Setting Values
Description
For setting the country code.
OFF
ON
Buzzer does not sound.
Sounds the buzzer.
Memo:
v
If the “BD-VIDEO RATINGS” setting is specified, you will
m
DEFAULT SETTING
be required to enter the password registered for the “BD-
VIDEO RATINGS” in order to change the “COUNTRY
CODE”.
Restores the setting values on the setting screen to their
factory default values.
Setting
Values
Description
v
AUDIO LANGUAGE
For setting the audio sound when playing back BD-Videos
or DVD-Videos.
YES
Restores the factory default values.
NO
Returns to the initial screen without
resetting the values.
v
SUBTITLE LANGUAGE
Memo:
For setting the subtitle language when playing back BD-
Videos or DVD-Videos.
v
“BD-VIDEO RATINGS” and “COUNTRY CODE” settings
cannot be reset once they have been specified.
v
MENU LANGUAGE
For setting the menu language when playing back BD-
Videos or DVD-Videos.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
m
RECORD
RESUME
The stop position can be stored when playback of a BD-
Video, DVD-Video, BDMV, AVCHD, finalized discs, or SD
card is stopped halfway.
4'%14&
Setting Values
Description
:2ꢁ/1&'ꢁ4'%14&+0)ꢁ#7&+1 &QND[ꢁ&KIKVCN
*+)*ꢀ52''&ꢁ&7$$+0)
OFF
ON
Resume information is not stored.
Stores resume information.
Memo:
v
Resume information is stored at all times for other discs as
well as the HDD regardless of this setting.
v
When a HDD title is selected using Playback Navigation, it
is played back from the beginning.
5'.'%6
1-
':+6
5'672
4'6740
v
Some discs do not allow playback from the resume point.
m
XP MODE RECORDING AUDIO
m
STILL MODE
For changing the settings of audio mode during recording in
the XP mode.
For setting the method for displaying paused images during
playback of the HDD or a disc.
Setting Values
Dolby Digital
LPCM
Description
Setting
Values
Description
Records in “Dolby Digital”.
Records in “LPCM”.
AUTO
Automatic control.
m
FIELD
Use this setting for moving images or when
there is blurring in the “AUTO” mode.
HIGH-SPEED DUBBING
Items under “VIDEO MODE RECORDING ASPECT” and
“DISC RECORDING AUDIO” can be set to support high-
speed dubbing.
FRAME
Use this setting when detailed patterns or
designs are not clear in the “AUTO” mode.
v
VIDEO MODE RECORDING ASPECT
Memo:
For setting the aspect ratio during recording.
v
This setting is disabled for programs in the DR mode and
during playback of AVCHD videos.
Setting
Values
Description
m
SEAMLESS PLAYBACK
AUTO
Performs recording in the aspect ratio
setting when recording starts.
For setting the method for playing back partially erased
scenes.
4:3
Records at the fixed aspect ratio of 4:3.
Records at the fixed aspect ratio of 16:9.
Setting Values
Description
16:9
OFF
ON
Plays back with high accuracy.
Plays back smoothly.
Memo:
v
High-speed dubbing to a DVD-Video disc cannot be
performed when there are different aspect ratios in a title.
In this case, fix the aspect ratio to 4:3 or 16:9. This setting
remains valid during re-encode dubbing.
Memo:
v
SD picture quality is retained during re-encode dubbing.
v
For joints of scenes that are 15 seconds or shorter,
seamless playback may fail even when it is set to “ON”.
The same applies during re-encode dubbing in the SD
picture quality.
For details on high-speed dubbing and re-encode dubbing,
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
v
DISC RECORDING AUDIO
AUDIO
For changing the settings of audio to be recorded to the disc
when in the AF, AN, AE or AL mode.
Setting
Values
Description
#7&+1
&;0#/+%ꢀ4#0)'ꢀ%10641.
&190ꢀ/+:
10
56'4'1
AUTO
Records “Stereo”, “Surround” or “Dual
broadcast” audio sounds as they are.
&+)+6#.ꢀ176
&8ꢀ+0ꢀ#7&+1ꢀ5'66+0)
$&ꢀ/+:ꢀ5170&
56'4'1ꢀꢁ
10
FIXED
Records “Stereo” and “Surround” sounds in
“Stereo”. “Dual broadcast” audio sounds are
recorded as they are.
Memo:
5'.'%6
':+6
1-
v
Surround sounds of a title become stereo sounds when re-
encode dubbing is performed.
5'672
4'6740
m
DYNAMIC RANGE CONTROL
m
AUTO MARKING
For setting the dynamic range compression ratio (ratio
between the maximum and minimum volume) during Dolby
Digital playback.
During direct recording to a recording media (HDD or optical
disc), you can append chapters by adding a mark at a fixed
interval of 10 minutes.
Setting Values
Description
Setting Values
Description
AUTO
Perform compression only for Dolby
TrueHD.
OFF
ON
Disables addition of chapters.
Enables addition of chapters.
OFF
ON
Not compressed.
Memo:
Perform maximum compression.
v
The interval for each chapter is fixed at 10 minutes. This
cannot be altered.
Memo:
v
v
Regardless of whether “AUTO MARKING” is set to “ON” or
“OFF”, you can perform manual marking using the Mark
button on the remote control.
During manual marking, an on-screen message is
displayed regardless of the “ON SCREEN GUIDE” setting
under “DISPLAY”.
Setting to “OFF” may produce the same effects as the “ON”
mode for some discs.
v
v
Performing compression allows even the slightest sound to
be heard clearly.
There may be differences in the effect depending on the
disc used.
m
DOWN MIX
For setting whether to output analog audio.
Setting Values
Description
STEREO
Use this setting when connecting an
audio amplifier or TV.
DOLBY
SURROUND
Use this setting when connecting an
amplifier that supports Dolby
Surround.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
v
DTS-HD
For setting audio output to “BITSTREAM” or “PCM”.
m
DIGITAL OUT
Set this item according to the device connected to the digital
audio output terminal (optical digital).
Setting Values
Description
v
PCM DOWN SAMPLING
BITSTREAM
Use this setting when connecting a
device that is able to decode “DTS-HD”.
For specifying settings on sampling frequency conversion.
Setting
Values
Description
PCM
Audio input will be changed and output as
“PCM”.
Use this setting when connecting a device
that is unable to decode “DTS-HD”.
OFF
Sampling frequency is not converted.
ON
Audio recorded at a sampling frequency of
96 kHz or 88.2 kHz is converted to 48 kHz
and 44.1 kHz respectively.
v
AAC
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values
Description
Memo:
v
Setting to “OFF” may produce the same effects as the “ON”
mode for some discs.
BITSTREAM
Use this setting when connecting a
device that is able to decode “AAC”.
v
Dolby Digital
PCM
Audio input will be changed and output as
“PCM”.
For setting audio output to “BITSTREAM” or “PCM”.
Use this setting when connecting a
device that is unable to decode “AAC”.
Setting Values
Description
BITSTREAM
Use this setting when connecting a
device that is able to decode “Dolby
Digital”.
Memo:
v
Audio sound may not be properly played back if the audio
equipment in use does not support “BITSTREAM” output.
In this case, set to “PCM”.
PCM
Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “Dolby
Digital”.
m
DV IN AUDIO SETTING
For changing the audio recording settings during DV input.
Setting Values
Description
v
Dolby Digital Plus/TrueHD
For setting audio output to “BITSTREAM” or “PCM”.
STEREO 1
Records the audio sound during video
recording (L1, R1).
Setting
Values
Description
STEREO 2
MIX
Records audio sound that is added later
(L2, R2), such as during editing.
BITSTREAM
Use this setting when connecting a
device that is able to decode “Dolby
Digital Plus/TrueHD”.
Records “STEREO 1” and “STEREO 2”
sounds.
PCM
Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “Dolby
Digital Plus/TrueHD”.
m
BD MIX SOUND
For setting a mixture of BD video secondary audio and
operation sounds output.
Setting
Values
Description
v
DTS
OFF
Outputs main audio only.
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values
Description
ON
Outputs a mixture of BD video secondary
audio and operation sounds during playback
of BD-Videos that contain BD video
secondary audio and menu operation
sounds.
BITSTREAM
Use this setting when connecting a
device that is able to decode “DTS”.
PCM
Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “DTS”.
Memo:
v
Output is converted to Dolby Digital or DTS according to
the main audio when the “DIGITAL OUT” item is set to
“BITSTREAM”.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
DISPLAY
CONNECTION
&+52.#;
%100'%6+10
10ꢀ5%4''0ꢀ)7+&'
$.7'ꢀ$#%-
#761
10
/10+614ꢀ6;2'
*&/+ꢀ%100'%6+10
*&/+ꢄ%'%
5%4''0ꢀ5#8'4
15&ꢀ.#0)7#)'
10
1((
'0).+5*
%1/210'06ꢀ176276
8+&'1ꢀ+0276ꢀ5'66+0)
ꢁꢂꢃꢂK
8+&'1
5'.'%6
1-
4'6740
':+6
5'672
5'.'%6
':+6
1-
5'672
4'6740
m
ON SCREEN GUIDE
For displaying operation details.
Setting Values
m
MONITOR TYPE
Description
For setting the aspect ratio according to the connected
monitor.
AUTO
Appears for five seconds when an
operation is performed.
Setting Values
Description
16:9
Set to this value when connected to
monitors with 16:9 aspect ratio.
OFF
Not displayed.
m
BLUE BACK
16:9FULL
Choose this setting when a 16:9 monitor
is connected to display images without
the black borders.
For setting the screen display when there is no signal input.
Setting Values
Description
4:3 PAN&SCAN Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with the left and right
edges trimmed off.
OFF
ON
Displays screen as it is.
Switches display to a blue screen.
m
SCREEN SAVER
4:3
Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with a black band at
the upper and lower ends.
For setting whether to use a screensaver.
LETTERBOX
Setting
Values
Description
OFF
ON
Screen saver is not used.
m
HDMI CONNECTION
VIDEO PRIORITY MODE
Setting Values
Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.
v
Description
SDI/
COMPONENT
Set to this value for output at a
m
OSD LANGUAGE
resolution of “480p” or higher from the
[COMPONENT VIDEO OUT] terminal,
or from the [SDI OUT] terminal.
For setting the language for messages displayed on-screen.
HDMI
Set to this value when priority is to be
given to the “HDMI OUTPUT
RESOLUTION” setting.
Memo:
v
During data output from the [HDMI] terminal, setting to
“SDI/COMPONENT” automatically outputs data in the
“COMPONENT OUTPUT” setting.
Setting to “HDMI” outputs data in the “HDMI OUTPUT
RESOLUTION” setting.
v
During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to “SDI/COMPONENT”
automatically outputs data in the “COMPONENT OUTPUT”
setting.
Setting to “HDMI” outputs data at the “480i” resolution from
the [COMPONENT VIDEO OUT] terminal.
v
When the [SDI OUT] terminal and the [HDMI] terminal are
connected at the same time, setting to “SDI/COMPONENT”
outputs data from the [SDI OUT] terminal.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
v
v
HDMI OUTPUT RESOLUTION
x.v.Color
Setting
Values
Description
Setting
Values
Description
AUTO
Automatically selects an appropriate
resolution according to the connected
device.
AUTO
Outputs x.v.Color information with HDMI
when video images that include x.v.Color
information are played back.
480p
1080i
720p
1080p
Fixes the resolution at 480p.
Fixes the resolution at 1080i.
Fixes the resolution at 720p.
Fixes the resolution at 1080p.
OFF
This is applicable when an x.v.Color
compatible monitor is connected.
Memo:
v
This is applicable when an x.v.Color compatible monitor is
connected.
v
Deep Color
Memo:
v
Setting
Values
Description
When the resolution is set to “720p”, videos are output at
“1080i” other than those recorded at “720p” even though
“720p” is shown on the display.
AUTO
Set to this value when a “Deep Color” device
is connected.
v
Depending on the conditions (monitor type 16:9, resolution
“720p” and above, aspect 4:3), some of the OSD display of
the component output may be cut off.
In this case, set “HDMI VIDEO MODE” to “OFF”.
OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may
be cut off with the above conditions even when “OFF” is
selected.
OFF
Set to this value when the video image is
distorted, or colors are unnatural.
v
HDMI RGB OUTPUT RANGE
Setting Values
STANDARD
ENHANCED
Description
In this case, set the component resolution to “480p” or
below, or set the monitor type to other settings except 16:9.
Set to this value for standard uses.
v
Set to this value when the black and
white parts of the video image are not
distinct.
BD-VIDEO 24p OUT
Setting
Values
Description
Memo:
OFF
Outputs in the resolution set by “HDMI
OUTPUT RESOLUTION”.
v
This is available when connected to a DVI device that only
supports RGB input.
v
ON
Outputs 24p elements at 24p.
HDMI --> DVI COLOR
Memo:
Setting
Values
Description
v
24p playback is possible for commercially available BD-
Videos or BDMVs that are recorded in 24p. Content other
than BDMVs that is dubbed or recorded on this unit at 24p,
as well as 24p content on SD cards are played back at 60p
or 60i.
AUTO
Value is set automatically according to the
monitor.
RGB FIX
Use this setting when video images are not
correctly displayed on the monitor.
v
This is applicable for BD-ROM and DVD-Video titles.
This is available when connected to a 24p compatible
monitor.
Memo:
v
This is available when the “x.v.Color” setting is set to “OFF”.
When the “x.v.Color” setting is set to “AUTO”, this setting will
be set to “AUTO” automatically.
v
v
Elements other than 24p ones are output at 60p.
No video images will be output from the video, S-video and
component outputs when the HDMI output resolution is at
1080/24p.
v
v
Change this setting when no video image appears while
connected to a DVI device.
HDMI AUDIO OUTPUT
Setting
Values
Description
OFF
Use this setting if you do not want to send
audio output from the HDMI cable.
ON
Use this setting to send audio output from
the HDMI cable.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
m
SDI CONNECTION
HDMI-CEC
For setting the HDMI-CEC operation from the connected
device.
5&+ꢀ%100'%6+10
5&+ꢀ#7&+1ꢀ+0276ꢀ5'66+0)
Setting Values
Description
%*ꢂꢅ%*ꢆ
%*ꢂꢅ%*ꢆ
10
5&+ꢀ#7&+1ꢀ176276ꢀ5'66+0)
ꢂꢃꢃꢄꢀ%108'45+10
OFF
ON
Disables HDMI-CEC.
Enables HDMI-CEC.
4'%.1%-
10
6+/'ꢀ%1&'ꢀ+0276ꢀ5'66+0)
6+/'ꢀ%1&'ꢀ&+52.#;ꢀ215+6+10
'ꢀꢁꢀ6+/'
%'06'4
m
COMPONENT OUTPUT
For setting the resolution of video output from the
[COMPONENT VIDEO OUT] terminals.
5'.'%6
':+6
1-
4'6740
5'672
Setting Values
Description
For specifying settings related to the SDI output terminal.
480i
Sets output to “480i”.
Sets output to “480p”.
Sets output to “720p”.
Sets output to “1080i”.
m
SDI AUDIO INPUT SETTING
480p
Set the channel (Lch, Rch) to which the video/audio of the
SD-SDI/HD-SDI input is to be recorded.
720p
1080i
Setting
Values
Description
Memo:
v
When the resolution is set to “720p”, videos are output at
“1080i” other than those recorded at “720p” even though
“720p” is shown on the display.
CH1-CH2
CH3-CH4
CH5-CH6
CH7-CH8
ANALOG
Use this setting to record the digital audio
input by assigning Lch to CH-1 of GROUP1
and Rch to CH-2.
v
v
v
This unit does not support component output at “1080p”. To
output at “1080p”, do so via HDMI connection.
Use this setting to record the digital audio
input by assigning Lch to CH-3 of GROUP1
and Rch to CH-4.
If “HDMI VIDEO MODE” is set to “ON”, the unit will output
at “480i” regardless of the current setting.
If “HDMI VIDEO MODE” is set to “OFF”, or when a HDMI
connection is used, DVD videos will be output at “480p”
even if “720p” or “1080i” has been set.
Use this setting to record the digital audio
input by assigning Lch to CH-5 of GROUP2
and Rch to CH-6.
v
The aspect ratio of video/S-video output changes according
to the component output setting. As such, there may be
cases where the aspect ratio of the video/S-video output is
different from the predefined setting of the content.
Use this setting to record the digital audio
input by assigning Lch to CH-7 of GROUP2
and Rch to CH-8.
Use this setting to record analog audio
signals from the SDI device to the L/Rch.
m
VIDEO INPUT SETTING
Choose a setting according to the video terminal to be
connected when an external analog input terminal is used.
Memo:
v
SD-SDI/HD-SDI digital audio (embedded audio) can be
recorded to maximum of four groups, two channel pairs per
each group. (four channels per group)
Setting
Values
Description
v
This unit uses Group 1 and Group 2, and records SD-SDI/
HD-SDI digital audio in the combinations of channels
described below:
VIDEO
Use this setting when connecting via the
video (BNC) terminal.
S-VIDEO
Use this setting when connecting via the
S-video (black) terminal.
GROUP NUMBER
GROUP1
Lch
Rch
CH1
CH3
CH5
CH7
CH2
CH4
CH6
CH8
GROUP1
GROUP2
GROUP2
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
v
v
SDI AUDIO OUTPUT SETTING
TIME CODE INPUT SETTING
Set the channel (Lch, Rch) for outputting the SD-SDI/HD-SDI
audio.
You can select whether to add a time code while recording
SDI input signals with this unit.
Setting
Values
Description
Setting
Values
Description
CH1-CH2
CH3-CH4
CH5-CH6
CH7-CH8
Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH1 and Rch to CH2.
OFF
Use this setting if you want to disable time
code input.
Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH3 and Rch to CH4.
TIME CODE When there are multiple time code inputs
from the SDI device, such information will
be superimposed over the SDI video input.
Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH5 and Rch to CH6.
DATE &
TIME
This unit superimposes the current date/
time over the SDI video input.
Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH7 and Rch to CH8.
v
TIME CODE DISPLAY POSITION
For setting the time code display position.
v
1440 CONVERSION
Setting Values
Description
When the HD-SDI digital video input signal is 1080, you can
select whether to record in 1920x1080 or 1440x1080.
LOWER LEFT
Sets the time code display position to the
bottom left.
Setting
Values
Description
LOWER
RIGHT
Sets the time code display position to the
bottom right.
OFF
Records the SDI signals as they are in
1920x1080.
UPPER LEFT
Sets the time code display position to the
top left.
ON
Records the SDI signals upon converting
them from 1920x1080h1440x1080.
UPPER RIGHT Sets the time code display position to the
top right.
Memo:
v
SDI signals for which this feature is applicable to are
1920x1080/59.94i, 1920x1080/23.98p, and
1920x1080/23.98psf.
CENTER
Sets the time code display position to the
center.
v
SDI signals that can be recorded with this unit are
1920x1080/59.94i, 1280x720/59.94p, 1920x1080/23.98p,
1920x1080/23.98psf, 1280x720/23.98p, and
720x480/59.94i(SD).
v
RECLOCK
Setting to “ON” helps to further stabilize the [THROUGH
OUT] output.
To output signals as they are, set to “OFF”.
Setting
Values
Description
OFF
Use this setting if you do not want to use the
Reclock feature.
ON
Use this setting if you want to use the
Reclock feature.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Locking the Disc Tray
Turning on the Mode Lock
By turning on the lock for the disc tray, the tray cannot be
Turning on the mode lock disables all operations using the
buttons on the unit and remote control, except for “Play” and
“Record”.
opened or closed using the [M] button.
Memo:
v
When the [M] button is pressed while the disc tray lock is
Memo:
v
When a button that is disabled is pressed, a “LOCKED”
turned on, a “LOCKED” message will appear on the display
window of the unit for about three seconds.
message will appear on the display window of the unit for
three seconds.
Locking the disc tray
Turning on the mode lock
1
Press the [A] button on the unit to turn “Off”
the power
1
Press the [Z] button on the remote control for
five seconds or longer when in the “Normal
Recording”, “Stop”, or “Normal Playback” mode
2
Press and hold the [o] button on this unit, then
press the [M] button
A “LOCKED” message appears on the display window of
the unit, indicating that the disc tray is locked.
v
A “LOCKED” message appears on the display window of
the unit, indicating that the mode lock is turned on.
v
Press the " " button for
five seconds or longer
Unlocking the disc tray
1
Press the [A] button on the unit to turn “Off”
the power
2
Press and hold the [o] button on this unit, then
press the [M] button
An “UNLOCK” message appears on the display window of
the unit, indicating that the disc tray is unlocked.
v
Turning off the mode lock
1
Press the [Z] button on the remote control for
five seconds or longer when the mode lock is
turned on
An “UNLOCK” message appears on the display window of
the unit, indicating that the mode lock is turned off.
v
Last Function Memory
When the power plug is disconnected from unit or when
power failure occurs, your settings for the following functions
are kept in the memory. These settings will resume when the
unit is turned on again.
v
v
Deck selection: HDD/BD/SD
v
v
v
Kept for DVD-Video/AVCHD/BDMV and title/chapter only.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
RS-232C Interface
Command Table
Lower Order
Higher Order
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
Complete
Error
Cassette
Out
Not
Target
ACK
NAK
1
2
3
4
5
6
Play
Stop
Still
Clear
Sense
Chapter
Title
Sense
7
8
Chapter
Search
Title
Search
Date
Preset
Clock
Preset
9
Finalize
Cancel-
Disc
Disc
Erase
TOP
MENU
NEXT
PREV
Setup
SET
UP
DOWN
RIGHT
FF
LEFT
REW
Next
Prev
Title
Remote
Data
MENU
CHAPTER CHAPTER
Title
Finalization
A
B
Standby
On
Standby
Off
Eject
Fwd
Field
Step
Rev
Field
Step
Fwd Shtl
Rev Shtl
Select
Preset
Select
Sense
Date
Clock
Data
Sense
Data
Sense
C
D
Rec
Status
Sense
Tc Data
Sense
CTL
Data
Sense
JVC
Status
Sense
E
F
Command
Target
Rec/Dub
Request
:
:
:
:
:
:
Mode
Non-synchronous
Specifications
Pin layout
Character length
Parity check
Start bit
8 bits
v
Odd
1
6
5
9
1
Stop bit
1
Data rate
9600 bps
v
PIN No. Signal
Operation
Direction of signal
This unit h PC
Bit configuration
Parity check
2
3
5
TxD
Transmit data
RxD Receive data
This unit i PC
D0 D1 D2 D3 D4 D5 D6 D7
GND Signal grounding
Starting bit
Stopping bit
Memo:
v
When using the Serial Command Connector, the cable to be used should be a RS-232C interface cable (straight type, 3 m or
shorter).
v
v
v
When using RS-232C, set “QUICK STARTUP” in the settings menu to “ON”.
During command transmission, a minimum interval of About 50 milliseconds is required between each command.
During command transmission, do not send the next command until the ACK (refer to “System Commands” (A page 95) ) or
v
The recommended maximum waiting time for the ACK or response for each command is as follows.
:
:
ACK
About 50 milliseconds
About 5 seconds
Response
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Command
m
Operation Commands
Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER
Command
Description
A0
A1
A3
AB
Power On
3A
3F
Plays the selected deck.
Power Off
Stops the selected deck. Resume will be
cleared when this is pressed while in the Stop
mode. Rec Request will be cleared.
Eject: Opens/Closes tray. (BD Deck)
FF: Functions only during playback. Activates
forward search.
4F
56
80
Switches the selected deck to the Still mode.
Clear: Clears the Error status.
AC
AD
REW: Functions only during playback.
Activates reverse search.
Searches the specified chapter and starts
playback from the beginning.
Functions as a key for advancing (FWD) a
frame. When this command is received during
still mode, the unit advances the still picture
by one frame (or field) in the FWD direction.
81
Searches the specified title under “ORIGINAL”
or in the “PLAY LIST” by its number and starts
playback from the beginning.
AE
B5
Functions as a key for reversing (REV) a
frame. When this command is received during
still mode, the unit reverses the still picture by
one frame (or field) in the REV direction.
8E
8F
90
91
92
93
For setting the date.
For setting the time.
Fwd Shtl: Functions only during playback.
Activates forward search.
B5 h 30: STILL
B5 h 31: FWD SLOW at a slow speed.
B5 h 33: FWD SLOW at a fast speed.
B5 h 35: 1x
B5 h 36: FWD SEARCH at a fast speed.
B5 h 37: FWD SEARCH at a faster speed.
B5 h 38: FWD SEARCH at the fastest speed.
Finalizes the disc. (BD Deck)
Cancels disc finalization. (BD Deck)
For erasing rewritable discs.
Displays/Closes the top menu of a disc. (BD
Deck)
94
95
Displays/Closes the disc menu. (BD Deck)
Advances to the next chapter. Functions like
the T button on the remote control.
B6
Rev Shtl: Functions only during playback.
Activates reverse search.
B6 h 30: STILL
B6 h 31: REV SLOW at a slow speed.
B6 h 33: REV SLOW at a fast speed.
B6 h 36: REV SEARCH at a fast speed.
B6 h 37: REV SEARCH at a faster speed.
B6 h 38: REV SEARCH at the fastest speed.
96
97
Returns to the previous chapter. Functions
like the S button on the remote control.
Displays/Closes the Main Menu, Editing,
Library Database Navigation or Dubbing
screen.
97 h 30: Closes the screen.
97 h 31: Displays the Main Menu screen.
97 h 32: Displays the Library Database
Navigation screen.
B8
For setting the input/output, recording mode,
audio language selection and subtitle
selection.
97 h 35: Displays the Editing screen.
CA
F0
Rec: Starts recording at the selected deck
when a Rec Request is received.
97 h 37: Displays the Dubbing screen.
98
99
9A
9B
9C
9D
Functions as a confirmation key.
Functions as an up key.
Functions as a down key.
Functions as a right key.
Functions as a left key.
Command Target:
F0 h 34: For selecting HDD deck.
F0 h 38: For selecting BD deck.
F0 h 3C: For selecting SD deck.
FA
Rec Request: For issuing approval for
recording. This can be cleared using STOP.
Advances to the next title. Functions like the
T button on the remote control.
9E
9F
Returns to the previous title. Functions like the
S button on the remote control.
Issues the same codes as the wired remote
control via RS-232C.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
80-8F
:
80 Chapter Search
1st Byte 2nd Byte 3rd Byte
Chapter Search
Hundreds Tens
Ones
3*
ASCII codes (30 - 39) 3*
E.g. (012) 30
3*
31
32
:
E.g. When searching the 12th chapter.
:
81 Title Search under “ORIGINAL”
1st Byte 2nd Byte 3rd Byte 4th Byte
Title Search (ORIGINAL) 30
Hundreds Tens
Ones
3*
ASCII codes (30 - 39)
E.g. (345)
30
30
3*
3*
33
34
35
:
E.g. When searching the 345th title, as indicated by the title number on the top right corner of the index, under “ORIGINAL”.
:
81 Title Search in “PLAY LIST”
1st Byte 2nd Byte 3rd Byte 4th Byte
Title Search (PLAY LIST) 38
Hundreds Tens
Ones
3*
ASCII codes (30 - 39)
E.g. (028)
38
38
3*
3*
30
32
38
:
E.g. When searching the 28th play list, as indicated by the play list number on the top right corner of the index, in the “PLAY
LIST”.
:
8E Date Preset
1st Byte
2nd Byte
3rd Byte
4th Byte
5th Byte 6th Byte
Date Preset
Mth (Tens) Mth (Ones) Day (Tens) Day (Ones) Yr (Tens) Yr (Ones)
ASCII code (30 - 39) 3*
E.g. (09.14.2012) 30
3*
3*
3*
3*
3*
39
31
34
31
32
:
E.g. When setting the date to September 14 2012.
:
8F Clock Preset
1st Byte 2nd Byte 3rd Byte
4th Byte
5th Byte
6th Byte
Clock Preset
Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones)
ASCII code (30 - 39) 3*
E.g. (12:34:56) 31
3*
3*
3*
3*
3*
32
33
34
35
36
:
E.g. When setting the time to 12 hrs 34 min and 56 sec.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
9F
:
9F Remote Data
The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes
apply to all three HDD, BD and SD deck unless otherwise stated.
Code
Items
INPUT SELECT
STOP
Remarks
80
CUSOR 0°
Moves the arrow in the
index list to the right. (I)
01
81
82
MENU
BD/DVD Deck only
03
CUSOR 90°
Moves the arrow in the
index list to the up. (J)
06
F.F/SPEED+
REW/SPEED-
POWER ON/OFF
PLAY
07
84
86
CUSOR 180°
CUSOR 270°
Moves the arrow in the
index list to the left. (H)
0B
0C
0D
14
Moves the arrow in the
index list to the down. (K)
PAUSE/STILL
FWD SKIP
REV SKIP
87
8E
8F
90
OPEN/CLOSE
PROGRESSIVE
TOP MENU
MARK
BD/DVD Deck only
HDD/BD Deck only
DVD Deck only
15
17
AUDIO
HDD/DVD Deck only
1A
1D
Power Off
96
CM SKIP
Power On
Use with “QUICK
STARTUP” set to “ON”.
Refer to “QUICK
AF
B0
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
C0
REV FRAME
-SLOW D
SHUTTLE-C
SHUTTLE-B
SHUTTLE-A
SHUTTLE-2
SHUTTLE-1
-SLOW B
21
22
23
24
25
26
27
28
29
2A
2B
2C
31
TEN KEY 1
TEN KEY 2
TEN KEY 3
TEN KEY 4
TEN KEY 5
TEN KEY 6
TEN KEY 7
TEN KEY 8
TEN KEY 9
KEY Z
-SLOW C
+SLOW C
+SLOW B
SHUTTLE +1
SHUTTLE +2
SHUTTLE +A
SHUTTLE +B
SHUTTLE +C
+SLOW D
TEN KEY 0
KEY #
REC MODE (XP/SP/LP/
EP…)
32
34
37
3C
3E
44
48
BD/DVD DECK
DUBBING
ANGLE/LIVE CHECK
ANGLE (BD/DVD Deck
only)
LIVE CHECK (HDD/BD
Deck only)
SET UP
OK/ENTER
C4
SUBTITLE
DVD Deck only
ON SCREEN
HDD DECK
CC REC
D3
D4
OPTION
RETURN
MEDIA MANAGEMENT
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
D5
D7
D9
DA
DB
COLOR KEY BLUE
E1
E2
L1 Y/C INPUT SELECT
HDD Deck only
HDD Deck only
COLOR KEY RED
JOG-1/6
L1 COMPOSITE INPUT
SELECT
E3
E4
E5
PLAYBACK SETTING
DELETE
JOG +1/6
JOG +1
INFORMATION
CORRECT
DC INSTANT REPLAY
DD EDIT
ED
F2
FWD FRAME
MODE LOCK
DE
DF
E0
COLOR KEY GREEN
COLOR KEY YELLOW
NAVIGATION
B8
:
B8 Input/Output Selection
1st Byte 2nd Byte
External input selection L-1 VIDEO
30
31
39
34
35
External input selection L-1 S-VIDEO 30
External input selection DV
External input selection SDI
30
30
:
B8 Recording Mode Selection
1st Byte 2nd Byte
XP
SP
LP
EP
34
34
34
34
30
31
32
33
40
41
42
43
DR1 34
DR2 34
DR3 34
DR4 34
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Subtitle Selection
:
B8 Subtitle Selection
1st
2nd
1st
2nd
1st
2nd
1st
2nd
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
OFF
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
EL
EO
ET
EU
FA
FJ
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
47
4B
4C
4D
4E
4F
50
51
52
53
54
55
LO
LT
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
56
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
76
77
SL
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
3C
78
79
7A
7B
7C
7D
7E
7F
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
JAPANESE
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
DUTCH
SWEDISH
NORWEGIAN
FINNISH
DANISH
AA
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
PL
FO
FY
GA
GD
GL
GN
GU
HA
HI
AB
AF
AM
HR
HU
HY
IA
TK
TL
AR
AS
TN
TO
TR
TS
TT
AY
AZ
IE
BA
IK
PS
PT
BE
IS
BG
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
QU
RM
RN
RO
RU
RW
SA
SD
SG
SI
TW
UK
UR
UZ
VI
BH
BI
BN
BO
BR
VO
WO
XH
YO
ZH
ZU
CA
CO
CS
CY
DZ
SK
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Audio Language Selection
:
B8 Audio Language Selection
1st
2nd
1st
2nd
1st
2nd
1st
2nd
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
JAPANESE
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
DUTCH
SWEDISH
NORWEGIAN
FINNISH
DANISH
AA
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
EO
ET
EU
FA
FJ
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
47
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
LT
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
76
77
78
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
79
7A
7B
7C
7D
7E
7F
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
PL
FO
FY
GA
GD
GL
GN
GU
HA
HI
AB
AF
AM
HR
HU
HY
IA
TK
TL
AR
AS
TN
TO
TR
TS
TT
AY
AZ
IE
BA
IK
PS
PT
BE
IS
BG
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
QU
RM
RN
RO
RU
RW
SA
SD
SG
SI
TW
UK
UR
UZ
VI
BH
BI
BN
BO
BR
VO
WO
XH
YO
ZH
ZU
CA
CO
CS
CY
DZ
SK
SL
EL
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Response Commands
Commands relating to RS-232C control system.
Command
Description
01
02
Complete: Issued by the external recorder upon completing all specified operations by commands.
Error: Issued by the external recorder when receiving invalid commands in the context. In such cases,
commands that are sent will not be accepted. However, a return command will be issued but only to the Status
Sense. To clear the Error status, perform command 56 (Clear).
05
Not Target: Issued by the external recorder when specified operations by commands cannot be completed
properly.
0A
0B
03
ACK: A return command issued when a defined command is received.
NAK: A return command issued when an undefined or possibly nonexistent command is received.
Cassette Out: Issued upon completing the operation of opening and closing the tray when the HDD/DVD deck
is selected.
System Commands
Commands for acquiring information such as deck status.
Command
Description
60
61
B9
Chapter Sense: For acquiring the current chapter number. (*)
Title/Track Sense: For acquiring the current title number under “ORIGINAL” or in the “PLAY LIST”. (*)
Select Sense: For acquiring the status of the inputs, outputs, recording mode, audio language selection and
subtitle selection. (*)
BE
BF
D7
D8
Date Sense: For acquiring the currently configured year, month and day. (*)
Time Sense: For acquiring the currently configured hour, minute and second. (*)
Status Sense: For acquiring the deck information. (*)
TC Data Sense: For acquiring the total remaining time in the current recording mode when there is a media in
the selected deck. (*)
D9
DD
FB
CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck. (*)
JVC Status Sense: Returns data from the unit. (*)
VTR Ind: A command for checking whether the connected device is the external recorder.
:
Sense
v
Chapter Sense
1st Byte 2nd Byte 3rd Byte
Chapter Sense Hundreds Tens
Ones
3*
60
3*
3*
E.g. (012)
30
31
32
:
E.g. When the current chapter is the 12th chapter.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
v
Title/Track Sense under “ORIGINAL”
1st Byte 2nd Byte 3rd Byte 4th Byte
Title/Track Sense (ORIGINAL) 30
Hundreds Tens
Ones
3*
61
30
30
3*
3*
E.g. (345)
33
34
35
:
E.g. When the current title under “ORIGINAL” is the 345th title.
v
Title/Track Sense in “PLAY LIST”
1st Byte 2nd Byte 3rd Byte 4th Byte
Title/Track Sense (PLAY LIST) 38
Hundreds Tens
Ones
3*
61
38
38
3*
3*
E.g. (028)
30
32
38
:
E.g. When the current title under “PLAY LIST” is the 28th title.
v
Select Sense
1st Byte
2nd Byte
3rd Byte
4th Byte
5th Byte
Select Sense
B9
External input
selection
Output selection Recording mode
selection
Audio language
selection
Subtitle selection
3*
3*
**
**
**
E.g. (3930311213) 39
30
31
12
13
:
E.g. When the selection status of the video deck is as follows:
External input selection h L-1 S-VIDEO
Output selection h Common output (Frame is fixed at 0.)
Recording mode selection h SP
Audio language selection h ENGLISH
Subtitle selection h GERMAN
When the current status cannot be acquired, the value is fixed as “-” (0x2D).
v
Date Data Sense
For acquiring the currently configured year, month and day in ASCII codes.
1st Byte
2nd Byte
3rd Byte
4th Byte
5th Byte 6th Byte
Date Sense
BE
Mth (Tens) Mth (Ones) Day (Tens) Day (Ones) Yr (Tens) Yr (Ones)
3*
3*
3*
3*
3*
3*
E.g. (09.14.2012) 30
39
31
34
31
32
When the current date is not set, the value is fixed as “-” (0x2D).
v
Time Data Sense
For acquiring the currently configured hour, minute and second in ASCII codes.
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
6th Byte
Time Sense
BF
Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones)
3*
3*
3*
3*
3*
3*
E.g. (12:34:56) 31
32
33
34
35
36
When the current time is not set, the value is fixed as “-” (0x2D).
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
v
Status Data Sense
For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/DVD.
D7
1byte
1byte
1byte
2byte
3byte
4byte
5byte
STATUS
SENSE
HDD
BD
SD
HDD/BD/SD
Video EE
HDD/BD/SD HDD/BD/SD HDD/BD/SD
bit7
1 (Fixed)
1 (Fixed)
1 (Fixed)
0 (Fixed)
During PLAY During PAUSE (Set
to 1 simultaneously
with “During PLAY”
in STILL mode.)
bit6
bit5
0 (Fixed)
0 (Fixed)
1 (Fixed)
0 (Fixed)
1 (Fixed)
1 (Fixed)
Audio EE
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During Reverse
Shuttle Search
(Excluding STILL)
bit4
bit3
Record
Forbidden
Record
Forbidden
1 (Fixed)
0 (Fixed)
0 (Fixed)
During
STOP
During Forward
Shuttle Search
(Excluding STILL)
Disc Not
Inserted
Disc Not
Inserted
Disc Not
Inserted
Occurrence of 0 (Fixed)
abnormality in
VTR
During
Refer to the
SEARCH SPEED
table.
STANDBY
(Unit Power
Off)
bit2
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
During
Repeat
Playback
(Including
PAUSE)
0 (Fixed)
Refer to the
SEARCH SPEED
table.
bit1
bit0
0 (Fixed)
0 (Fixed)
0 (Fixed)
During REC
0 (Fixed)
Refer to the
SEARCH SPEED
table.
RS-232C
command
RS-232C
command
RS-232C
command
0 (Fixed)
Refer to the
SEARCH SPEED
table.
error status. error status. error status.
Clear using
56 (Clear).
Clear using
56 (Clear).
Clear using
56 (Clear).
v
TC Data Sense
1st Byte 2nd Byte 3rd Byte
4th Byte
5th Byte
6th Byte
7th Byte
8th Byte
TC Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones)
D8
3*
3*
3*
3*
3*
3*
3*
3*
E.g. (01:23:45) 30
31
32
33
34
35
30
30
:
E.g. When remaining time is 1 hr 23 min 45 sec.
Frame is fixed as 0.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
v
SEARCH SPEED
bit3
bit2
bit1
bit0
STILL
0
0
0
1
1
1
1
0
0
0
0
0
1
1
0
0
1
0
1
0
1
0
x1
0
0
0
0
0
1
SEARCH1
SEARCH2
SEARCH3
SEARCH4
SEARCH5
v
CTL Data Sense
For acquiring lapse counter of selected deck in hours, minutes and seconds.
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
CTL Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones)
6th Byte
7th Byte
8th Byte
D9
3*
3*
3*
3*
3*
3*
3*
3*
E.g. (01:23:45)
30
31
32
33
34
35
30
30
:
E.g. When time lapse counter is 1 hr 23 min 45 sec.
Frame is fixed as 0.
v
JVC Status Sense
1byte
2byte
3byte
4byte
HDD/BD/SD HDD/BD/SD
HDD/BD/SD
1 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
HDD/BD/SD
1 (Fixed)
1 (Fixed)
0 (Fixed)
0 (Fixed)
bit7 1 (Fixed)
0 (Fixed)
0 (Fixed)
1 (Fixed)
0 (Fixed)
bit6 0 (Fixed)
bit5 0 (Fixed)
bit4 0 (Fixed)
bit3 0 (Fixed)
Refer to the DISC TYPE table below. 0 (Fixed)
During dubbing (Including
PAUSE)
bit2 0 (Fixed)
bit1 0 (Fixed)
bit0 1 (Fixed)
Refer to the DISC TYPE table below. 0 (Fixed)
Refer to the DISC TYPE table below. 0 (Fixed)
0 (Fixed)
0 (Fixed)
0 (Fixed)
Refer to the DISC TYPE table below. During dubbing (Including
PAUSE)
v
DISC TYPE
bit3 bit2 bit1 bit0
bit3 bit2 bit1 bit0
DVD
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
1
0
1
0
0
CD
0
1
1
1
1
1
1
0
0
0
1
1
1
0
0
1
1
1
1
0
1
0
1
0
DVD-RAM
DVD-R
BD-ROM
BD-R
DVD-RW
DVD+R
DVD+RW
BD-RE
No disc
Unknown
When SD deck is selected, the values are fixed as bit3:0, bit2:0, bit1:1 and bit0:0.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Language Code List
Code
AA
Language
Code
HI
Language
Code
OS
PA
FA
Language
Afar
Hindi
Ossetian
Panjabi
Persian
Pali
AB
Abkhazian
Afrikaans
Akan
HO
HU
IG
Hiri Motu
Hungarian
Igbo
AF
AK
PI
SQ
AM
AR
AN
HY
AS
Albanian
Amharic
Arabic
IS
Icelandic
Ido
PL
Polish
IO
PT
Portuguese
Pashto
II
Sichuan Yi
Inuktitut
Interlingue
PS
QU
RM
RO
Aragonese
Armenian
Assamese
IU
Quechua
IE
Rhaeto-Romance
Romanian
IA
Interlingua (International
Auxiliary language Association)
AV
AE
AY
AZ
BA
BM
EU
BE
BN
BH
BI
Avar
ID
IK
Indonesian
Inupiak
RN
RU
SG
SA
SR
HR
SI
Kirundi
Avestan
Aymara
Russian
Sango
IT
Italian
Azerbaijani
Bashkir
JV
JA
KL
KN
KS
KR
KK
KM
KI
Javanese
Japanese
Kalaallisut
Kannada
Kashmiri
Kanuri
Sanskrit
Serbia
Bambara
Basque
Croatian
Sinhala
Slovak
Belarusian
Bengali
SK
SL
Slovenian
Northern Sami
Samoan
Shona
Bihari
Kazakh
SE
SM
SN
SD
SO
ST
ES
SC
SS
SU
SW
SV
TY
TA
TT
Bislama
Bosnian
Breton
Khmer
BS
BR
BG
MY
CA
CH
CE
ZH
CU
CV
KW
CO
CR
CS
DA
Kikuyu
RW
KY
KV
KG
KO
KJ
KU
LO
LA
LV
LI
Kinyarwanda
Kirghiz
Sindhi
Bulgarian
Burmese
Catalan, Valencian
Chamorro
Chechen
Chinese
Church Slavic
Chuvash
Cornish
Somali
Komi
Southern Sotho
Spanish
Sardinian
Swati
Kongo
Korean
Kwanyama
Kurukh
Sundanese
Swahili
Lao
Latin
Swedish
Tahitian
Tamil
Latvian
Corsican
Cree
Limburgish
Lingala
LN
LT
LB
Tatar
Czech
Lithuanian
Luxembourgish
TE
TG
Telugu
Danish
Tajik
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
DV
NL
DZ
EN
EO
ET
EE
FO
FJ
Divehi
LU
LG
MK
MH
ML
MI
Luba-Katanga
Ganda
TL
TH
BO
TI
Tagalog
Thai
Dutch
Dzongkha
English
Esperanto
Estonian
Ewe
Macedonian
Marshallese
Malayalam
Māori
Tibetan
Tigrinya
Tongan
Tswana
Tsonga
Turkmen
Turkish
Twi
TO
TN
TS
TK
TR
TW
UG
UK
UR
UZ
VE
VI
MR
MS
MG
MT
MO
MN
NA
NV
NR
ND
NG
NE
NN
NB
NO
NY
OC
OJ
Marathi
Faroese
Fijian
Malay
Malagasy
Maltese
FI
Finnish
French
FR
FY
FF
KA
DE
GD
GA
GL
GV
EL
GN
GU
HT
HA
HE
HZ
Moldavian
Mongolian
Nauruan
Uighur
Ukrainian
Urdu
Western Frisian
Fulah
Georgian
German
Scottish Gaelic
Irish
Navajo
Uzbek
South Ndebele
North Ndebele
Ndonga
Venda
Vietnamese
Volapük
Welsh
VO
CY
WA
WO
XH
YI
Galician
Manx
Nepali
Norwegian Nynorsk
Norwegian Bokmål
Norwegian
Chichewa
Occitan
Walloon
Wolof
Greek
Guaraní
Gujarati
Haitian
Xhosa
Yiddish
Yoruba
Zhuang
Zulu
YO
ZA
ZU
Hausa
Ojibwa
Hebrew
Herero
OR
OM
Oriya
Oromo
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Country Code List
Code
AD
AE
AF
Country Name
Code
GM
GN
Country Name
Code
NU
NZ
Country Name
Andorra
Gambia
Guinea
Niue
United Arab Emirates
Afghanistan
New Zealand
Oman
GP
Guadeloupe
Equatorial Guinea
Greece
OM
PA
AG
AI
Antigua and Barbuda
Anguilla
GQ
GR
Panama
Peru
PE
AL
Albania
GS
South Georgia and South Sandwich
Islands
PF
Polynesia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Armenia
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
Guatemala
PG
PH
PK
PL
Papua New Guinea
Philippines
Pakistan
Netherlands Antilles
Angola
Guam
Guinea-Bissau
Antarctica
Argentina
American Samoa
Austria
Guyana
Poland
Hong Kong
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Saint Pierre and Miquelon
Pitcairn Islands
Puerto Rico
Portugal
Heard and McDonald Islands
Honduras
Australia
Croatia
Aruba
Haiti
Palau
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
Hungary
Paraguay
Indonesia
Qatar
IE
Ireland
Reunon Island
Romania
IL
Israel
IN
India
Russian Federation
Rwanda
Burkina Faso
Bulgaria
IO
British Indian Ocean Territory
IQ
Iraq
Saudi Arabia
Solomon Islands
Seychelles
Bahrain
IR
Iran
Burundi
IS
Iceland
BJ
Benin
IT
Italy
Sudan
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
Bermuda
Brunei
JM
JO
JP
KE
KG
KH
KI
Jamaica
Jordan
Sweden
Singapore
Bolivia
Japan
Saint Helena
Slovenia
Brazil
Kenya
Bahamas
Bhutan
Kyrgyzstan
Cambodia
Kiribati
SJ
Svalbard and Jan Mayen Islands
Slovakia
SK
SL
Bouvet Island
Botswana
Belarus
Sierra Leone
San Marino
Senegal
KM
KN
KP
Comoros
Saint Kitts and Nevis
SM
SN
Belize
Korea, Democratic People’s Republic SO
of
Somalia
CA
CC
CF
CG
CH
CI
Canada
KR
KW
KY
KZ
LA
LB
Korea, Republic of
Kuwait
SR
ST
SV
SY
SZ
TC
Suriname
Cocos Islands
Central African Republic
Congo, Republic of
Switzerland
Sao Tome and Principe
El Salvador
Cayman Islands
Kazakhstan
Laos
Syria
Swaziland
Cote d’Ivoire
Lebanon
Turks and Caicos Islands
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
Cook Islands
LC
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
TD
TF
Chad
Chile
LI
French Southern Territories
Togo
Cameroon
China
LK
TG
TH
TJ
LR
Thailand
Colombia
LS
Lesotho
Tajikistan
Costa Rica
Cuba
LT
Lithuania
Luxembourg
Latvia
TK
TM
TN
TO
TP
TR
TT
Tokelau
LU
Turkmenistan
Tunisia
Cape Verde
Christmas Island
Cyprus
LV
LY
Libya
Tonga
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
Morocco
East Timor
Czech Republic
Germany
Monaco
Turkey
Moldova
Trinidad and Tobago
Tuvalu
Djibouti
Madagascar
Marshall Islands
Mali
TV
TW
TZ
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
ET
FI
Denmark
Taiwan
Dominica, Commonwealth of
Dominican Republic
Algeria
Tanzania
Myanmar
Mongolia
Macau
UA
UG
UM
US
UY
UZ
VA
VC
VE
VG
VI
Ukraine
Uganda
Ecuador
Minor Outlying Islands
United States
Uruguay
Estonia
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Egypt
Western Sahara
Eritrea
Uzbekistan
Vatican
Spain
Saint Vincent and the Grenadine
Venezuela
Ethiopia
Mauritius
Maldives
Finland
British Virgin Islands
Virgin Islands of the United States
Vietnam
FJ
Fiji
Malawi
FK
FM
FO
FR
FX
GA
GB
Falkland Islands (Malvinas)
Micronesia (Federated States of)
Faroe Islands
France
Mexico
VN
VU
WF
WS
YE
YT
YU
Malaysia
Vanuatu
Mozambique
Namibia
Wallis and Futuna
Samoa
France, Metropolitan
Gabon
New Caledonia
Niger
Yemen
Mayotte
United Kingdom of Great Britain and
Northern Ireland
Norfolk Island
Yugoslavia
GD
GE
GF
GH
GI
Grenada
Georgia
NG
NI
Nigeria
ZA
ZM
ZR
ZW
South Africa
Zambia
Nicaragua
Netherlands
Norway
Nepal
French Guiana
Ghana
NL
NO
NP
NR
Zaire
Zimbabwe
Gibraltar
GL
Greenland
Nauru
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Using the HDMI Consumer
Electronics Control (HDMI
CEC)
Creating a Seamless BD
When titles are imported into the HDD in the HD quality from
a video camera, or when edited titles (e.g., after applying
scene delete) are dubbed to a disc, seamless playback may
not be possible at the joints of scenes. In this case, perform
dubbing after executing “SEAMLESS” under the “MODE
CHANGE” setting menu.
HDMI Consumer Electronics Control
By using a HDMI cable to connect this unit with a TV that
v
supports the HDMI CEC standard, this unit and the TV can
be linked and operated together.
Creating a seamless BD that uses “MODE
CONVERSION” (seamless conversion,
recording mode conversion)
v
HDMI CEC (Consumer Electronics Control) is an industrial
standard that allows HDMI devices to be linked and
operated among each other by connecting them with a
HDMI cable.
m
Procedures to create a seamless BDMV
File to import
If you do not want to
perform scene delete/
chapter delete
If you want to
perform scene
delete/chapter
delete
HDMI Consumer Electronics Control
operations
v
Perform the following operations when this unit is turned
AVCHD
MOV*
Recording mode
conversion
-
on, and the TV will switch automatically to the HDMI input
that this unit is connected to.
v
Playback from HDD, BD/DVD or SD CARD
Conversion not required Seamless
conversion
v
Press the [NAVIGATION] or [SETUP] button
v
Turning off the power for the TV will also turn the power off
SD-VIDEO(HD)* Recording mode
Recording mode
conversion after
seamless conversion
for this unit automatically.
If HDD, BD/DVD or SD CARD is being used for dubbing,
the power will be turned off after dubbing finishes.
HDV
conversion after
seamless conversion
:
SD-VIDEO(HD)* SD-VIDEO(JVC Everio MPEG2 TS)
:
MOV*
MOV files that are taken in SP mode and
HQ mode using the JVC ProHD Camcorder
GY-HM700/100
Using HDMI Consumer Electronics Control
(activating the function)
1
Connect this unit to a TV that is HDMI CEC
compatible using a HDMI cable
m
Procedures to create a seamless BDAV
2
Change the setting of “HDMI-CEC” to “ON”
Check the monitor (TV) setting if the HDMI CEC function
does not work.
File to import
If you do not want to
perform scene delete/
chapter delete
If you want to
perform scene
delete/chapter
delete
v
Memo:
v
If you are not using the HDMI CEC function (deactivating),
change the setting of “HDMI-CEC” to “OFF”.
AVCHD
MOV*
Conversion not required
-
Conversion not required Seamless
conversion
Note:
v
The HDMI CEC function cannot be used if a TV that is not
compatible with HDMI CEC has been connected.
SD-VIDEO(HD)* Seamless conversion
HDV
Seamless
conversion
v
If a HDMI cable is not used for connecting, the HDMI CEC
function will not be usable.
:
SD-VIDEO(HD)* SD-VIDEO(JVC Everio MPEG2 TS)
:
MOV*
MOV files that are taken in SP mode and
HQ mode using the JVC ProHD Camcorder
GY-HM700/100
Memo:
v
During dubbing to BDMV, the recording mode cannot be
specified.
v
v
v
Do not perform recording mode conversion before
seamless conversion. Otherwise, seamless conversion
cannot be performed.
If scene delete or chapter delete is applied to a title, it
cannot be dubbed to a BDMV disc without performing
seamless conversion.
For titles that are imported into the HDD in the SD picture
quality, you can create a seamless DVD by setting
“SEAMLESS PLAYBACK” under the “Setting Menu List” to
“ON”, followed by performing re-encode dubbing.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
Problem
Symptom
Action
Reference
Page
Power does not turn on The “HELLO” message remains
up.
Press the [RESET] button on the front
displayed, and the unit does not start panel.
If it does not start up, stop using this unit,
unplug the plug from the power point, and
bring it to the dealer or “Service Center”.
“FAN LOCKED” is
displayed on the display
window of this unit
The cooling fan motor is not working. The cooling fan motor is spoiled. Remove
the power plug from the power point, and
consult the dealer from which this product
is purchased, or any nearby JVC Servicing
Center.
-
Power turns off
automatically
The “AUTO POWER (OFF)” setting is Change the “AUTO POWER (OFF)”
set to “2 HOURS” or “6 HOURS”.
setting of “SETUP” to “OFF”.
The temperature of this unit has rose, Place this unit in an area with ventilation if
-
and operation has ceased for safety
purposes.
possible, and wait approximately 30
minutes for it to cool down.
The power turns on
automatically
The “HDMI-CEC” setting is set to
“ON”.
Change the “HDMI-CEC” setting of
“CONNECTION” to “OFF”.
Input cannot be
switched
i.LINK connection is currently being
established.
Cancel importing, or wait until the
connection ends.
There are no video
images on the monitor
Monitor only supports RGB input.
Set “HDMI --> DVI COLOR” in the setting
menu to “RGB FIX”.
“HDCP ERROR” is displayed.
Use a monitor that supports HDCP.
-
Video images may be distorted during This is not a malfunction. Change the
reencoding/dubbing when the monitor “HDMI OUTPUT RESOLUTION” to a value
(TV) is connected to this unit using a
HDMI cable, or when the screen
resolution is set to “1080p”.
other than “1080p” (e.g., 1080i) if you find
it annoying.
Screen is distorted
Video images may be distorted during This is not a malfunction. Change the
reencoding/dubbing when the monitor “HDMI OUTPUT RESOLUTION” to a value
(TV) is connected to this unit using a
HDMI cable, or when the screen
resolution is set to “1080p”.
other than “1080p” (e.g., 1080i) if you find
it annoying.
There is no audio sound The “HDMI AUDIO OUTPUT” setting
is set to “OFF”.
Change the “HDMI AUDIO OUTPUT”
setting of “CONNECTION” to “ON”.
The amplifier does not support
“BITSTREAM” output.
Use an amplifier that supports bitstream
output.
Dubbing cannot be
performed
The title to be dubbed is copyright
protected.
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
A finalized disc has been inserted.
The disc is not formatted.
Insert a disc that has not been finalized.
Format the disc.
-
The SD card is write-protected.
protect lock.
High-speed dubbing
cannot be performed for “SOME TITLES CANNOT BE
Dubbing cannot be performed and
Set “HIGH-SPEED DUBBING” in the
settings menu to “4:3” before recording or
EP mode titles
DUBBED” is displayed when trying to importing in the EP mode.
perform high-speed dubbing of a EP
mode title to a DVD-VIDEO mode
disc.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
(Continued)
Problem
Symptom
Action
Reference
Page
Data cannot be
imported
The title to be dubbed is copyright
protected.
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
The number of titles stored in the HDD Delete or combine the titles in the HDD to
has reached the maximum amount.
reduce the amount of titles to less than
500.
The remaining space on the HDD is
running out.
remaining space.
The title/group name
cannot be changed
Protection of the title/group name is
turned on.
The remote control
unit does not work
The battery of the remote control unit
has run out.
Change new batteries for the remote
control.
The remote control code of this unit
and the remote control unit are
different from each other.
for the remote control to the same number
used by this unit.
A “LOCKED” message appears on the Disable the “mode lock” setting.
display window of the unit.
-
The disc cannot be
ejected
A “LOCKED” message appears on the Disable the “tray lock” setting.
display window of the unit.
The “READING” message does not
disappear from the unit’s display
window, and the disc tray does not
open when the [ M ] button is pressed.
Pressing the [ M ] button at the front of the
unit for five seconds or longer opens the
disc tray. To close the disc tray after
removing the disc, press the [ A ] button,
and wait until the tray is closed and power
is turned off.
(If the disc tray does not open after
pressing the [ M ] button for five seconds
or longer, consult our authorized dealer.)
The disc cannot be
played
A disc that cannot be played on this
unit is inserted.
Confirm that the disc is playable on this
unit.
The region code of the BD or DVD is
different from that of this unit.
on this unit.
An unfinalized DVD disc that is
recorded using another device is
inserted.
Use that device to finalize the disc.
-
-
Output is at 480i
regardless of the
component output
resolution setting
The component output setting may be
changed to 480i after viewing at a
setting of 1080/24p using a HDMI
connection.
Turn the power off, and turn it on again.
The aspect ratios of
the HDMI output and
component output are component output terminals of this
When two monitors are connected
respectively to the HDMI output and
When two monitors are connected
simultaneously, users are recommended
to set “HDMI VIDEO MODE” to “OFF”.
different
unit, the screen aspect ratio of the
component output may not be
appropriate if “HDMI VIDEO MODE” is
set to “ON”.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
:
:
:
C
0.286 Vp-p, 75 K
4-pin for HDV/DV IN
φ3.5 mm Jack
Specifications
General
Power requirement
AC 120 V H, 60 Hz
Power consumption
DV
Remote Input
m
:
Serial Command D-SUB 9-PIN
Component video output:
:
:
Y
1.0 Vp-p, 75 K
0.7 Vp-p, 75 K
:
:
Power on
Power off
41 W
CB/CR, PB/PR
3.0 W
Memo:
v
Laser specification
For CD
Corresponding to copy protection
Digital audio output:
:
:
Wavelength
Output
779 nm to 789 nm
:
Optical
PCM, AAC, Dolby Digital and DTS
No hazardous radiation is emitted
with the safety protection.
HDMI output
19-pin type A
For DVD
Wavelength
Output
(Deep Color, x.v.Color, Ver1.3)
USB terminal
:
:
656 nm to 663 nm
USB2.0
No hazardous radiation is emitted
with the safety protection.
m
SD memory card
For BD
SD, SDHC
:
:
Wavelength
Output
400 nm to 410 nm
m
HDD Deck
500 GB
No hazardous radiation is emitted
with the safety protection.
Recording compression system
Temperature
Operating
Storage
Video
:
:
5 °C to 35 °C (41 °F to 95 °F)
-20 °C to 60 °C (-4 °F to 140 °F)
MPEG2 (VBR)
H.264/AVC
Audio
Dolby Digital (2 ch)
Linear PCM (2ch, XP mode only)
MPEG1 Audio Layer2 (2ch, recorded in HD-SDI)
:
:
:
Operating
position
Horizontal only
Dimensions
(W x H x D)
435 mm x 70 mm x 351 mm
(17-1/10" x 2-6/8" x 13-13/16")
m
BD/DVD Deck
Weight
5.3 kg (11.7 lbs)
Recording compression system
Video
MPEG2 (CBR/VBR)
H.264/AVC
Audio
Dolby Digital (2 ch)
Linear PCM (2ch, XP mode only)
MPEG1 Audio Layer2 (2ch, recorded in HD-SDI)
Region code
m
Input/Output
:
:
HD-SDI/SD-SDI
input
SMPTE 292M-compliant / SMPTE
259M-C-compliant (BNC)
HD-SDI/SD-SDI
output
SMPTE 292M-compliant / SMPTE
259M-C-compliant (BNC: switchable
between Direct/Monitor)
:
HD-SDI/SD-
SDI[THROUGH
OUT] output
SMPTE 292M-/ SMPTE 259M-C-/
SMPTE 424M-compliant (BNC)
:
:
BD
Region A
#1
DVD
:
:
:
:
Video input
Video output
Audio input
Audio output
S-video input
1.0 Vp-p, 75 K (BNC)
m
1.0 Vp-p, 75 K (BNC)
ACCESSORIES
Max 2 Vrms / 10 kK (pin jack)
2 Vrms / 10 kK terminated (pin jack)
Provided accessories
v
AC power cord
v
Infrared remote control unit
v
“AA” battery x 2
:
:
Y
1.0 Vp-p, 75 K
v
CD-ROM
C
0.286 Vp-p, 75 K
Design and specifications subject to change without
notice.
S-video output
Y
:
1.0 Vp-p, 75 K
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
110
Download from Www.Somanuals.com. All Manuals Search And Download.
LST1302-001A
©2012 JVC KENWOOD Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|
