Snapper Lawn Mower CP21402R2 User Manual

Parts Manual for  
21" STEEL DECK COMMERCIAL  
WALK BEHIND MOWERS  
SERIES 0, 1 & 2  
PUSH MODELS  
PROPELLED  
MODELS  
C21400R2  
C21500KWV  
C21501KWV  
CP21400R2  
CP21401R2  
CP21402R2  
CP21500KWV  
CP21501KWV  
CP21550KWV  
ECP21400R2  
ECP21500KWV  
ECP21501KWV  
ECP21550V  
McDonough, GA, 30253 U.S.A.  
COPYRIGHT © 2006  
SNAPPER PRODUCTS, INC.  
ALL RIGHTS RESERVED.  
Manual No.  
7006144  
Revision 3, 6/13/2006  
TP 400-5199-3-WB-N  
Table Of Contents  
PAGE  
4
GROUP  
Handles & Controls  
Cutting Deck, Blade, Interlock  
Front Wheel Bracket, Latches  
Rear Wheel Brackets, Latches  
Front And Rear Wheels  
Drive System Self-Propelled  
Transmission (Differential)  
Throttle Controls & Engine Specs.  
Decals  
8
12  
14  
16  
18  
22  
24  
26  
28  
30  
32  
34  
36  
Adapter, Brackets  
Accessory - Grass Bag  
Recycling Kits  
Accessory - Snapperizer  
Accessory - Thatcherizer  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
3
Handles & Controls  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
4
Handles & Controls  
Item Part No  
Qty Description  
Note  
1
2
3
4
5
6
7
7046914  
7024890  
7033986  
7033985  
7024978  
7033904  
7025036  
7027774  
7027393  
7032826  
7014307  
7025013  
7012121  
7012122  
7038478  
7029911  
7012093  
7090188  
7023801  
7032830  
7032408  
7015752  
7010937  
7091190  
7012114  
7090595  
7090238  
7090799  
7091601  
7091606  
HANDLE, Upper  
Was 24889, Used on All  
Used on All  
HANDLE, Middle  
HANDLE, Lower Right Hand  
HANDLE, Lower Left Hand  
CONTROL, Blade  
Was 33812, Used on All  
Was 33811, Used on All  
Used on All  
CLIP, Blade Control  
Used on All  
CABLE, Blade Control  
CABLE, Blade Control  
CABLE, Blade Control  
HANDLE, Wheel Drive  
GRIP, Wheel Drive Handle  
CABLE, Clutch Pull (Z-Bend)  
COVER, Vinyl  
Used on Briggs Engines  
Used on Kawasaki Engines  
Used on Robin Engines  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on All  
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
SPRING, Clutch  
SECTOR, Speed  
LEVER, Speed Control  
SPRING, Speed Control  
WASHER, 3/8" Flat  
GRIP, Speed Control Handle  
ANCHOR, Speed Control  
GUIDE, Lower V-Belt  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on All  
ROD, Transfer  
CLIP, Transfer Rod  
BOLT, 5/16-18 x 1-1/2" Curved Head  
BUSHING, Differential  
BOLT, 5/16-18 x 3/4" Flange Lock  
SCREW, 5/16-24 x 1" Hex Cap  
BOLT, 5-16-18 x 5/8" Carriage  
NUT, 5/16-18 Hex Flange Lock  
NUT, 5/16-24 Center Lock  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Was 91026 (Used on All)  
Was 90585 (Used on All)  
Was 91074 (Used on Self-  
Propelled)  
29  
30  
31  
32  
33  
34  
35  
7023813  
7090545  
7023893  
7091025  
7090053  
7090095  
7091022  
CLIP, Wiring Harness  
Used on All  
SCREW, 5/16-24 x 1-1/2" Machine  
DECAL, Blade Control  
Used on All  
Used on European Models  
Used on Self-Propelled  
Was 91023 (Used on All)  
Was 91024 (Used on All)  
Used on All  
SCREW, 1/4-28 x 1-3/8" Hex Cap  
WASHER, 1/4 Internal Tooth Lock  
NUT, 1/4-28 Hex  
SCREW, 1/4-28 x 1-3/4" Hex Cap  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
5
Handles & Controls  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
6
Handles & Controls  
Item Part No  
Qty Description  
Note  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
7014343  
7023792  
7091020  
7023886  
7022460  
7032833  
7090391  
7090095  
7015753  
7024087  
7024446  
7090895  
7091511  
7024211  
BUSHING  
Used on All  
PIN, Clutch Handle  
NUT, Push (for handle pin)  
DECAL, Wheel Control  
GRIP, Foam  
Used on Self-Propelled  
Used on Self-Propelled  
Used on European Models  
Used on All  
STRAP, Handle  
Used on All  
WASHER, 5/16 Internal Tooth Lock  
NUT, 1/4-28 Hex  
Was 91068 (Used on All)  
Used on Self-Propelled  
Used on Self-Propelled  
Used on Self-Propelled  
Used on European Models  
Used on Self-Propelled  
Was 91069 (Used on All)  
Used on Non-European  
JOINT, Ball  
DECAL, Speed Selector  
DECAL, Speed Selector  
NUT, 5/16-18 Tee  
46  
47  
48  
NUT, 5/16-18 Hex  
DECAL, Blade Control  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
7
Cutting Deck, Blade, Interlock  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
8
Cutting Deck, Blade, Interlock  
Item Part No  
Qty Description  
Note  
1
7057663  
DECK, Mower  
Was 57665 (Includes painted  
deck with decals)  
2
3
7091601  
7090731  
7091169  
7090324  
7032417  
7026175  
7091122  
7090385  
7090379  
7090167  
7012063  
7019795  
12  
9
NUT, 5/16-18 Hex Flange Lock  
Was 90585  
BOLT, 5/16-18 x 1/2" Short Neck Carriage  
BOLT, 5/16-18 x 1-1/8" Short Neck Carriage  
SCREW, 3/8-18 x 1" Self-Tapping (Engine Mounting)  
SPRING, Wheel Bracket Type Interlock  
INSULATOR, Interlock  
4
5
2
6
6
8
9
SCREW, 1/4-20 x 1/2" Self-Tapping  
WASHER, #8 Tab Internal Tooth Lock  
SCREW, #8-18 x 3/4" Hex Machine  
SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)  
WASHER, Cone  
Was 90539  
10  
11  
12  
13  
14  
BLADE, Cutter (20.75")  
14A 7026407  
BLADE, Cutter (20.75")(Quad Edge)  
HUB, Blade Drive 25mm (Briggs & Robin)  
HUB, Blade Drive 7/8" (Kawasaki)  
KEY, 3/16 x 5/8" Woodruff (Briggs)  
KEY, 1/4 x 3/4" Square (Robin)  
SCREW, 5/16-18 x 5/16" Hex Socket Set  
PULLEY, Engine (Briggs)  
15  
16  
7015626  
7012927  
7015894  
7016755  
7090201  
7015780  
7022106  
7021764  
7031968  
7012135  
7091508  
7011791  
7011762  
7060785  
17  
18  
PULLEY, Engine (Robin)  
PULLEY, Engine (Kawasaki)  
19  
20  
21  
22  
23  
SHIELD, Belt Opening Cover  
(Push Models Only)  
Was 90001  
BUSHING, Interlock Wire  
4
BOLT, 5/16-18 x 3/4" Short Neck Carriage  
RETAINER, 5/16 Bolt  
COVER, Spark Plug  
(Not Shown)  
KIT, Air Lift  
(Includes items 24 thru 27); For  
use with P/N 1-9795 Blade  
24  
25  
26  
27  
28  
29  
30  
31  
7032558  
7090391  
7091297  
7090228  
7041400  
7090702  
7013320  
7033863  
2
4
4
4
LIFT, Air  
WASHER, 5/16 Internal Tooth Lock  
NUT, 5/16-24 Hex  
Was 90223  
SCREW, 5/16-24 x 21/32" Machine  
STRUCTURE, Fender  
BOLT, 5/16-18 x 2-1/4" Hex Flange Lock  
BUSHING  
(European Models Only)  
COVER, Belt  
(European Models Only)  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
9
Cutting Deck, Blade, Interlock  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
10  
Cutting Deck, Blade, Interlock  
Item Part No  
Qty Description  
WASHER, 5/16 Split Lock  
Note  
32  
33  
7090187  
7091511  
7026471  
NUT, 5/16-18 Hex  
Was 90196  
WIRE, Interlock (Kawasaki) (not shown)  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
11  
Front Wheel Bracket, Latches  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
12  
Front Wheel Bracket, Latches  
Item Part No  
Qty Description  
ASSEMBLY, Arm, Left Wheel  
Note  
1
7051885  
(Consists of Items 2, 3, 4, 5A, &  
6)  
7051886  
ASSEMBLY, Arm, Right Wheel  
(Consists of Items 2, 3, 4, 5B, &  
6)  
2
3
4
7015761  
7012325  
7027702  
BOLT, 5/16-18 x 3/4" Shoulder  
LATCH, Height  
GRIP, Latch  
5A 7031016  
5B 7031017  
ARM, Left Wheel  
ARM, Right Wheel  
RETAINER, 5/16 Bolt  
NUT, 5/16-18 Hex Flange  
BRACKET, Front Wheel  
AXLE  
6
7
8
9
7011791  
7091601  
7041666  
7021119  
Was 91070  
Was 41387  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
13  
Rear Wheel Brackets, Latches  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
14  
Rear Wheel Brackets, Latches  
Item Part No  
Qty Description  
Note  
1
2
3
4
5
6
7046983  
7091012  
7035717  
7091604  
7091601  
7052909  
BEARING  
Was 18767  
3
6
SCREW, #10-32 x 3/8" Self-Tapping  
LATCH, Height Adjusting  
Was 19218  
Was 90005  
Was 90585  
BOLT, 1/4-20 x 1/2" Short Neck Carriage (Gr. 5)  
NUT, 5/16-18 Hex Flange Lock  
ASSEMBLY, Wheel Arm (Square Hole, Front Left & Rear Right) Was 51954 (Push Models)  
(Includes Items 3,10,14A,15 &  
17)  
7
8
9
7052908  
7054246  
7054247  
ASSEMBLY, Wheel Arm (Round Hole, Front Right & Rear Left) Was 51955 (Push Models)  
(Includes Items 3,11,14A,15 8  
17)  
ASSEMBLY, Wheel Arm  
ASSEMBLY, Wheel Arm  
Was 51814 (For Rear Right Self-  
Propelled Models);(Includes  
Items 1,2,3,12,14B,15 & 17)  
Was 51815 (For Rear Left Self-  
Propelled Models);(Includes  
Items 1,2,3,13,14B,15 & 17)  
10  
11  
12  
13  
7031016  
7031017  
7032722  
7032723  
ARM, (Square Axle End)  
ARM, (Round Axle End)  
ARM, Wheel Rear Right  
ARM, Wheel Rear Left  
BOLT, 5/16-18 x 1" Shoulder  
BOLT, 5/16-18 x 3/4" Shoulder  
RETAINER, 5/16 Bolt  
RING  
(For Self-Propelled Models)  
(For Self-Propelled Models)  
(For Self-Propelled Models)  
(For Push Models)  
14A 7011078  
14B 7015761  
15  
16  
17  
18  
19  
20  
21  
22  
7011791  
7023791  
7027702  
7090053  
7091576  
7033846  
7036242  
7021119  
GRIP, Latch  
WASHER, 1/4 Internal Tooth Lock  
NUT, 1/4-20 Hex  
Was 91023  
Was 90063  
BRACKET, Right Rear Wheel  
BRACKET, Left Rear Wheel  
AXLE,  
(For Self-Propelled Models)  
(For Self-Propelled Models)  
(Rear - Push Models, also Front  
Axle on all Models)  
23  
24  
25  
26  
7011780  
7026166  
7091809  
7019522  
7017010  
2
2
RING  
(For Push Models)  
GUARD, Rear Foot  
PIN, 1/8 x 1-1/2" Cotter  
GUARD, Rear Foot  
GUARD, Rear Foot  
Was 37765 (Push Models)  
Was 90297  
(For Self-Propelled Models)  
(For European Self-Propelled  
Models)  
27  
28  
29  
30  
7012616  
7036050  
7036049  
7091508  
SUPPORT, Foot Guard  
BRACKET, Right Rear Wheel  
BRACKET, Left Rear Wheel  
BOLT, 5/16-18 x 3/4" Short Neck Carriage  
(For Push Models)  
(For Push Models)  
Was 90001  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
15  
Front And Rear Wheels  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
16  
Front And Rear Wheels  
Item Part No  
Qty Description  
Note  
1
7022801  
7022800  
7026182  
7031121  
7031960  
7090377  
7031961  
WHEEL, Rear 9.20 x 2.00 Steel Rim  
WHEEL, Rear 9.20 x 2.00 Steel Rim  
WHEEL, Front 8.00 x 2.00 Steel Rim  
HUB-CAP (Front Wheels)  
(For Self-Propelled Models)  
(For Push Models)  
2
3
HUB CAP (Rear Wheels)  
4
5
2
NUT, 7/16-18 Hex Center Lock  
WASHER, 7/16 Flat  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
17  
Drive System Self-Propelled  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
18  
Drive System Self-Propelled  
Item Part No  
Qty Description  
Note  
1
2
7012354  
7034179  
7051921  
7032832  
7012124  
7091025  
7090303  
7012117  
7072284  
7019383  
7012316  
7012126  
7012111  
7031873  
7028014  
7011025  
7090289  
7031809  
7010937  
7032664  
7012353  
7053225  
7038486  
7010746  
7026693  
7090981  
7061276  
BELT, Poly-Vee  
LINK, Differential  
Was 31880  
ASSEMBLY, Clutch Idler  
(Includes items 3 thru 7)  
3
4
ARM, Clutch Idler  
2
2
PULLEY, Idler  
5
SCREW, 1/4-28 x 1-3/8" Hex Head Cap  
NUT, 1/4-28 Hex Lock  
BUSHING, 3/8 I.D. Nylon  
SHAFT, Hex  
6
7
8
Was 23744  
9
PULLEY, Poly-V  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
WASHER, 3/8" Flat  
SPRING, Torsion  
STUD  
HOLDER, Bearing (Inner Half)  
BEARING, Ball  
O-RING  
NUT, 3/8-24 Hex Center Lock  
HOLDER, Bearing (Outer Half)  
CLIP, 1/4 Right Arc (Transfer Rod)  
SHIELD, Hex Shaft  
(For European Models Only)  
BELT, Engine Drive  
ASSEMBLY, Driven Disc  
PLATE, Thrust  
Was 57444 (Includes 21 thru 28)  
21  
22  
23  
24  
25  
RING, Retaining  
BEARING, Ball  
4
SCREW, #10-32 x 1/4" Self-Tapping Machine  
ASSEMBLY, Hub  
Was 51616 (Includes 11108  
Bushing & 90913 Screws)  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
7023364  
7031013  
7090913  
7012125  
7090390  
7090122  
7091630  
7091294  
7090053  
7015753  
RING, Driven  
PLATE, Ring Retaining  
SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)  
GUIDE, Thrust Plate  
5
3
3
WASHER, 3/8 Internal Tooth Lock  
WASHER, 3/8" Flat  
NUT, 3/8-24 Hex  
Was 90155  
Was 90055  
WASHER, 1/4 Flat  
WASHER, 1/4 Internal Tooth Lock  
JOINT, Ball  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
19  
Drive System Self-Propelled  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
20  
Drive System Self-Propelled  
Item Part No  
Qty Description  
Note  
36  
37  
38  
39  
40  
41  
42  
43  
7015752  
7061275  
7017696  
7029025  
7032116  
7013847  
7090947  
7090372  
7052987  
7033774  
7012306  
7021758  
7090534  
7090391  
7011079  
7091597  
7091122  
7091070  
7090731  
7012122  
7016380  
7090095  
LINK, Transfer  
ASSEMBLY, Drive Disc  
BUSHING  
2
2
SPRING (Wheel Drive & Idler)  
ARM, Idler  
Was 17326  
RETAINER, 3/8 Bolt  
BOLT, 1/4-20 x 1-1/2" Carriage  
NUT, 1/4-20 Hex Center Lock  
ASSEMBLY, Deck Bracket  
BRACKET, Deck  
(Includes items 44 thru 46)  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
BUSHING, Flange  
SPACER  
SCREW, 5/16-18 x 1/2" Hex Head Cap  
WASHER, 5/16 Internal Tooth Lock  
WASHER, Spring  
Was 91068  
PIN, 3/32 x 1/2" Cotter  
SCREW, 1/4-20 x 1/2" Self-Tapping  
NUT, 5/16-18 Hex Flange Lock GR 5  
BOLT, 5/16-18 x 5/8" Short Neck Carriage  
SPRING, Clutch  
Was 90555  
Was 90539  
2
2
SCRAPER, Drive Pulley  
NUT, 1/4-28 Hex  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
21  
Transmission (Differential)  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
22  
Transmission (Differential)  
Item Part No  
Qty Description  
Note  
7059070  
ASSEMBLY, Transmission  
NUT, 5/16-24 Hex Lock  
WASHER, Spring  
Was 57525 (Includes 1 thru 31)  
Was 11201  
1
7092062  
7014263  
7019213  
7011724  
7053942  
7051908  
7014155  
7012314  
7012507  
7073963  
7016544  
7050767  
7050830  
7012495  
7031970  
7031965  
7090557  
7011774  
7090189  
7051903  
7090911  
7012543  
7050831  
7021115  
7012500  
7011110  
7090376  
7053939  
7057634  
7024442  
7090303  
7060337  
4
2
3
PULLEY, Poly-Vee Belt  
WASHER, Spring  
4
5
ASSEMBLY, Housing Right  
HOUSING, Right Side  
SCREW, 5/16-24 x 1-1/8" Rib Neck  
SEAL, 5/8 I.D.  
Was 59794 (Includes 6 thru 10)  
Was 17080  
6
7
3
2
2
8
9
BEARING, Differential  
BEARING, Ball  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
Was 11767  
PLUG, Housing  
GEAR, Input  
AXLE, Short  
GEAR, Differential (46 Tooth)  
PLATE  
2
2
4
WASHER, Thrust  
SCREW, #10-32 x 1-1/2" Hex Head Cap  
GASKET, Housing  
3
4
WASHER, 5/16 Internal/External Tooth Lock  
BRACKET, Differential  
SCREW, 1/4-20 x 1-1/4" Self-Tapping  
SPACER, Axle Gear  
AXLE, Long  
4
4
4
4
GEAR, Pinion (12 Tooth)  
SPACER, Pinion Gear  
SHAFT, Pinion  
NUT, #10-32 Hex Lock  
ASSEMBLY, Housing Left  
HOUSING, Left Side  
GASKET, 5/8 O.D.  
Was 57523 (Includes 8, 9 & 29)  
Was 17015  
3
4
NUT, 1/4-28 Hex Lock 9 (not shown)  
KIT, Transmission Gear  
(Includes Items 14 thru 17 & 22  
& 24 Thru 27)  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
23  
Throttle Controls & Engine Specs.  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
24  
Throttle Controls & Engine Specs.  
Item Part No  
Qty Description  
THROTTLE CONTROL, Robin (50.0” conduit length)(2 cycle)  
Note  
7026309  
7024136  
7026467  
7035854  
THROTTLE CONTROL, Briggs (49.75” conduit length)(4 cycle)  
THROTTLE CONTROL, Kawasaki (49” conduit length)(4 cycle)  
THROTTLE CONTROL, Robin (49” conduit length)(2 & 4 cycle)  
ENGINE, 5.5 HP 2-Cycle Briggs 099772-3111-01  
ENGINE, 5 HP Kawasaki FC150V-ES0  
ENGINE, 5 HP Kawasaki FC150V-ES11  
ENGINE, 4 HP 2-Cycle Robin WT-125V-600009  
ENGINE, 4 HP 2-Cycle Robin WT-125V-600005  
Footnotes:  
NOTE: Snapper part number is printed on the throttle control conduit.  
NOTE: Purchase engine parts from engine manufacturer's dealer.  
21" STEEL DECK COMMERCIAL  
Manual No.  
7006144  
SERIES 0, 1 & 2  
25  
TP 400-5199-3-WB-N  
Decals  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
26  
Decals  
Item Part No  
Qty Description  
DECAL, Blade Control  
Note  
1
2
3
4
5
6
7
8
7024088  
7024211  
7023893  
7024087  
7024446  
7013010  
7027432  
7072921  
7026384  
7026383  
7023009  
7023008  
7017218  
7023886  
7024204  
7026878  
7026877  
7024197  
DECAL, Blade Control  
DECAL, Blade Control  
DECAL, Speed Sector  
DECAL, Speed Sector  
DECAL, Danger  
(For European Models Only)  
(For European Models Only)  
DECAL, 5 HP Overhead Valve  
DECAL, Convertible  
Was 24380  
(Not Shown)  
LOGO, Recycling Mulcher (Ninja)  
LOGO, Recycling / Mulching  
DECAL, Noise Control  
DECAL, GS  
9
10  
11  
12  
13  
14  
15  
16  
17  
(For European Models Only)  
(For European Models Only)  
(For European Models Only)  
(For European Models Only)  
DECAL, Spark Plug  
DECAL, Wheel Control  
DECAL, Snapper (3.38 Dia.)  
DECAL, OHV (Overhead Valve)  
DECAL, Kawasaki  
DECAL, 4 HP - 2 Cycle  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
27  
Adapter, Brackets  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
28  
Adapter, Brackets  
Item Part No  
Qty Description  
Note  
1
7051951  
ASSEMBLY, Bag Adapter & Cover  
(For European Models Only);  
(Includes items 2 thru 9)  
2
3
7016107  
7019287  
7023000  
7091604  
7090053  
7091576  
7032661  
7023042  
7016050  
7024340  
7024085  
7011791  
7091508  
7042965  
7091076  
7090951  
ADAPTER, Grass Bag  
COVER, Bag Adapter  
HINGE, Chute Cover  
4
5
5
5
5
BOLT, 1/4-20 x 1/2" Short Neck Carriage  
WASHER, 1/4 Internal Tooth Lock  
NUT, 1/4-20 Hex  
Was 90005  
Was 91023  
Was 90063  
6
7
8
STOP, Cover  
9
MOLDING, Trim  
10  
11  
12  
13  
14  
16  
17  
18  
ADAPTER, Grass Bag  
SPACER  
NUT, 5/16-18 Wing (Nylon Patch)  
RETAINER, 5/16 Bolt  
BOLT, 5/16-18 x 3/4 Short Neck Carriage  
CHUTE, Side  
Was 90001  
Was 16090  
WASHER, 5/16 Flat  
NUT, 5/16-18 Hex Flange Lock  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
29  
Accessory - Grass Bag  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
30  
Accessory - Grass Bag  
Item Part No  
Qty Description  
Note  
7061239  
KIT, Grass Catcher  
(Includes items 1 thru 4)  
Was 26302  
1
2
7074426  
7050711  
7042489  
7026313  
7016050  
7024340  
7024085  
7011791  
7091076  
7090951  
BAG, Grass (Commercial)  
ASSEMBLY, Slider  
3
CONNECTOR, Grass Bag  
WIRE, Bag Connector  
ADAPTER, Bag  
Was 47969  
4
5
6
SPACER  
7
NUT, 5/16-18 Wing (Nylon Patch)  
RETAINER, 5/16 Bolt  
WASHER, 5/16 Flat  
8
9
10  
NUT, 5/16-18 Hex Flange Lock  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
31  
Recycling Kits  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
32  
Recycling Kits  
Item Part No  
Qty Description  
KIT, Recycling Cover (Includes the 2 items below)  
Note  
7061200  
7061201  
for 4HP & above engines  
for 4HP & above engines  
KIT, Recycling Plug (Quad Blade) (Incl. the 2 items below)  
COVER, 21” Deck  
1
2
3
7029149  
7016814  
7026407  
1
1
1
PLUG, Chute Adapter  
BLADE, 21” Quad Edge Ninja  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
33  
Accessory - Snapperizer  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
34  
Accessory - Snapperizer  
Item Part No  
Qty Description  
Note  
7060440  
KIT, Snapperizer  
(Includes Items 1 Thru 5)  
1
2
3
4
5
7051243  
7039759  
7091297  
7090187  
7012587  
SCREEN, Fastener Assembly  
RING, Bottom  
3
3
3
NUT, 5/16-24 Hex  
WASHER, 5/16 Split Lock  
SPRING  
Was 90223  
Footnotes:  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
35  
Accessory - Thatcherizer  
Manual No.  
7006144  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
TP 400-5199-3-WB-N  
36  
Accessory - Thatcherizer  
Item Part No  
Qty Description  
Note  
7061256  
KIT, Thatcherizer (Includes items listed below)  
Recommended for propelled  
models only.  
1
7032891  
2
1
1
2
1
1
6
1
1
1
10  
4
2
2
2
2
2
6
2
6
6
6
2
4
1
2
1
1
1
1
1
** LATCH, Frame Attachment  
BAR, Mount (Right Hand)  
BAR, Mount (Left Hand)  
2A 7026572  
2B 7026573  
3
7018499  
7018700  
7019948  
7018496  
7014100  
7018493  
7018189  
7091705  
7091294  
7022425  
7090825  
7091576  
7022424  
7090015  
7091303  
7091530  
7014098  
7090187  
7091511  
7014101  
7014342  
7014103  
7090250  
7014115  
7014062  
7060554  
7060555  
26700  
ROD, Tine  
4
SUPPORT, Wheel  
5
TRAY, Tine  
6
KIT, Tine Thatching Spring  
** BUSHING, Wheel Adjuster  
** AXLE, Wheel  
Was 60574  
7
8
9
WHEEL, 7.00 x 1.50 Gage  
* NUT, 1/4-20 Hex Top Lock  
* WASHER, 1/4” Flat  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
Was 90761, only 9 shown  
Was 90055  
** SPRING, Compression  
* BOLT, 1/4-20 x 1-1/4” Hex, GR 5  
* NUT, 1/4-20 Hex, GR 5  
** CAP, Vinyl  
Was 90063  
* BOLT, 1/4-20 x 2-1/2” Square Neck Carriage  
* BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5  
* BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR 5  
* WASHER, Reinforcing (.343 I.D.)  
* WASHER, 5/16” Split Lock  
* NUT, 5/16-18 Hex, GR 5  
** NUT, 1/2” Push  
only 1 shown  
Was 90383, only 1 shown  
Was 90074  
only 1 shown  
only 1 shown  
Was 90196, only 1 shown  
** BEARING, Nyliner  
** SET SCREW, 5/16-18 x 1/4”  
WASHER, 1/2” Flat  
slotted headless cup point  
DECAL, Adjustment  
DECAL, Thatcherizer  
HARDWARE BAG, Thatcherizer 21” (Std.)  
HARDWARE BAG, Thatcherizer 21” (Special)  
MANUAL, Operator's (61256)  
Not shown  
Not shown  
Not shown  
Footnotes:  
* Included in Hardware Bag # 60554  
** Included in Hardware Bag # 60555  
21" STEEL DECK COMMERCIAL  
SERIES 0, 1 & 2  
Manual No.  
7006144  
TP 400-5199-3-WB-N  
37  
Parts Manual for  
21" STEEL DECK COMMERCIAL  
WALK BEHIND MOWERS  
SERIES 0, 1 & 2  
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS  
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE  
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS  
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE  
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.  
McDonough, GA, 30253 U.S.A.  
COPYRIGHT © 2006  
SNAPPER PRODUCTS, INC.  
ALL RIGHTS RESERVED.  
Manual No.  
7006144  
Revision 3, 6/13/2006  
TP 400-5199-3-WB-N  

Exmark Lawn Mower Turf Tracer Hydro User Guide
Global Machinery Company Lawn Mower RL 500 User Guide
Husqvarna Lawn Mower 2346 XLS User Guide
Lawn Boy Honda Engine Manual User Manual
Ryobi Lawn Mower 197788 User Guide
Scag Power Equipment Lawn Mower SMWC 52V User Guide
Scag Power Equipment Lawn Mower STT 28CAT User Guide
Snapper Lawn Mower CP215017KWV CP216017RV CP214017R2 User Manual
Snapper Lawn Mower ECP21500KWV User Manual
Snapper Lawn Mower ZF2100DKU ZF2300GKU ZF5200M ZF6100M User Guide