Grizzly Lawn Sweeper T10042 User Guide

MODEL T10042  
26" LAWN SWEEPER  
INSTRUCTION SHEET  
D
C
To reduce the risk of injury from using this  
product:  
E
F
Do not allow anyone to operate the  
sweeper without proper training.  
Do not allow children to use the sweeper.  
Always wear proper eye protection  
when using the sweeper.  
If an object becomes lodged in the  
sweeper, do not attempt to remove it  
while the sweeper brush is moving.  
Figure 1. Inventory 1.  
Keep all hardware tightened to be sure  
the sweeper is in safe working order.  
G
Thoroughly inspect the sweeper for  
damage after striking any foreign  
objects.  
M
H
I
Inventory (Figures 1 and 2)  
N
A. Sweeper Assembly (not shown)................. 1  
B. Leaf Bag (not shown)................................. 1  
C. Long Bag Rod (27¼") ................................ 1  
D. Short Bag Rod (25½")................................ 1  
E. Frame Handle............................................. 1  
F. Frame Legs ................................................ 2  
G. Hex Bolts M6-1 x 30................................... 4  
H. Lock Washers 6mm ................................... 4  
I. Hex Nuts M6-1 ........................................... 4  
J. Carriage Bolts M6-1 x 30 ........................... 4  
K. Lock Nuts M6-1.......................................... 4  
L. Bag Clips.................................................... 4  
M. Hairpin Cotter Pins..................................... 2  
N. Rubber Caps .............................................. 2  
L
J
K
Figure 2. Inventory 2.  
COPYRIGHT © NOVEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#JB10062 PRINTED IN CHINA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations  
The Model T10042 can be raised or lowered to  
achieve the optimal sweeping height for different  
surfaces and for different operators.  
Maintenance  
To prevent unnecessary wear, periodically lubri-  
cate the brush shaft bushings, the wheel bush-  
ings, and grease the ratchet gears in each wheel  
assembly.  
The optimal height adjustment allows the operator  
to handle the sweeper comfortably and positions  
the brushes so that they extend approximately ½"  
into the grass.  
To lubricate the bushings (twice annually):  
1. Tilt the sweeper onto its side and apply a few  
drops of light oil to the brush shaft, as shown  
in Figure 9.  
To adjust the brush height:  
1. Loosen the height adjustment knob, then  
slide the adjustment bar downward to raise  
the brushes or upward to lower the brushes.  
When the desired height is reached, tighten  
the height adjustment knob (Figure 8).  
Brush Shaft  
Height  
Adjustment Knob  
Brush Shaft  
Bushing  
Adjustment Bar  
Apply Oil Here  
Figure 9. Brush shaft bushing lubrication.  
2. With the sweeper still on its side, remove the  
dust cap on the exposed wheel, then apply  
a few drops of light oil to the wheel axle, as  
shown in Figure 10, and spin the wheel to  
distribute the oil.  
Figure 8. Height adjustment.  
Tips for using the Model T10042 Lawn  
Sweeper:  
Empty the leaf bag after every use.  
Wheel Axle  
Wheel Axle  
To dump the leaf bag, tilt the sweeper all the  
way forward.  
For best results and ease of use, be sure the  
height is properly adjusted for both the sur-  
face being swept and the user's height.  
Apply Oil Here  
Bushing  
Follow the maintenance schedule outlined  
in these instructions to prevent unnecessary  
wear on your sweeper.  
Figure 10. Wheel axle lubrication.  
-3-  
T10042 26" Lawn Sweeper  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Replace the dust cap and allow the oil to pen-  
etrate for a few minutes. Flip the sweeper on  
to the other side and repeat Steps 1-3 for the  
other bushings.  
2. Remove the retaining clip from the brush  
shaft, then remove the spacers (Figure 13).  
Every two years, the ratchet assemblies in each  
wheel should be cleaned and greased.  
Note: When performing this procedure, take  
notes on the position of all washers, spacers,  
and retaining rings. Work on one side at a time to  
avoid mixing directional components.  
Brush Shaft  
Ratchet Gear  
Retaining Clip  
To grease the ratchet assemblies:  
Ratchet Gear  
Spacers  
1. Remove the dust cover and the retaining clip  
holding the wheel, then remove the wheel  
(Figures 11 and 12).  
Figure 13. Ratchet gear assembly.  
3. Remove the ratchet gear and the ratchet pin  
(Figure 14).  
Brush Shaft  
Ratchet Gear  
Wheel  
Figure 11. Retaining clip removal.  
Ratchet Pin  
Figure 14. Ratchet gear assembly.  
Ratchet Gear  
4. Thoroughly clean, then grease the parts  
using multipurpose grease. Re-assemble in  
the reverse order from disassembly.  
5. Repeat for the other wheel.  
Wheel  
Figure 12. Wheel removed.  
-4-  
T10042 26" Lawn Sweeper  
Download from Www.Somanuals.com. All Manuals Search And Download.  
With extensive use, the brushes on the Model  
T10042 may become worn and require replace-  
ment.  
Brush  
Rotation  
Overlap Bristles  
To replace the brushes:  
1. Tilt the sweeper all the way forward to allow  
easy access to the brushes. For the sake of  
simplicity, only replace one brush at a time.  
Remove  
2. Remove the lock nuts and hex bolts indicated  
in Figure 15, and remove the old brushes.  
It is not necessary to remove the bolts and  
nuts connecting the brush holder to the brush  
shaft.  
Brush  
Rotation  
Figure 15. Brush assembly (end view).  
3. Install the new brush, making sure the over-  
lap bristles are properly oriented in relation-  
ship to the direction of brush rotation, as  
shown in Figure 15. Tighten the hex nuts.  
-5-  
T10042 26" Lawn Sweeper  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T10042 Parts & Labels Breakdown and List  
�  
�  
��  
 
 
�  
�  
 
�  
�  
�  
�  
�  
48  
�  
�  
�  
�  
��  
�  
�  
�  
�  
�  
��  
�  
�  
��  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
REF PART #  
DESCRIPTION  
WHEEL DUST COVER  
REF PART #  
PT10042025  
DESCRIPTION  
1
PT10042001  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
FRICTION WASHER  
PINION GEAR RIGHT  
SWEEPER BODY  
CARRIAGE BOLT M8-1.25 X 55  
HEX BOLT M6-1 X 30  
BRUSH CLAMP  
2
PR06M  
EXT RETAINING RING 16MM  
FLAT WASHER 16MM  
WHEEL BUSHING  
WHEEL  
PT10042026  
PT10042027  
PCB28M  
3
PW08M  
4
PT10042004  
PT10042005  
PR05M  
5
PB29M  
6
EXT RETAINING RING 15MM  
OUTER SHIM  
PT10042030  
PT10042031  
PLN03M  
7
PT10042007  
PT10042008  
PT10042009  
PT10042010  
PT10042011  
PT10042012  
PW04M  
BRUSH RETAINER  
LOCK NUT M6-1  
8
PINION GEAR LEFT  
PIN  
9
PLN02M  
LOCK NUT M5-.8  
HEX BOLT M6-1 X 20  
HEX BOLT M5-.8 X 25  
BRUSH ASSEMBLY  
BRUSH SHAFT  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
INNER SHIM  
PB08M  
BRUSH AXLE BUSHING  
WHEEL AXLE  
PB94M  
PT10042036  
PT10042037  
PT10042038  
PCB29M  
FLAT WASHER 10MM  
LOCK NUT M8-1.25  
DUST COVER ASSEMBLY  
HEX NUT M10-1.5  
ENDPLATE BUSHING  
LOCK NUT M10-1.5  
HEX BOLT M8-1.25 X 12  
CONNECTOR TUBE  
FEMALE KNOB M8-1.25  
FLAT WASHER 8MM  
LOCK WASHER 8MM  
LOCK NUT M6-1  
PT10042014  
PT10042015  
PN02M  
BAG CLIP  
CARRIAGE BOLT M6-1 X 30  
HOPPER BAG  
PT10042040  
PT10042041  
PT10042042  
PT10042043  
PT10042044  
PT10042045  
PT10042046  
PLW04M  
PT10042017  
PLN05M  
FRAME LEG  
RUBBER CAP  
PB06M  
SHORT BAG ROD  
LONG BAG ROD  
HAIRPIN COTTER PIN  
FRAME HANDLE  
PT10042020  
PT10042021  
PW01M  
PLW04M  
LOCK WASHER 8MM  
GRIZZLY.COM LABEL  
PLN03M  
PT10042048  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Briggs Stratton Lawn Mower 192400 User Manual
Craftsman Lawn Mower 37654 User Guide
Cub Cadet Lawn Mower SERIES 1000 User Guide
Husqvarna Lawn Mower Z4818BIA 968999250 User Guide
Poulan Lawn Mower 182705 User Guide
Snapper Lawn Mower 215012 215014 R215012 N215012 NR215012 FR215012 FR215014 P216012 EP216012 NP216012 RP215012 RP216012 RP215012T2 FRP216012 NRP215012 NFRP216012 User Manual
Snapper Lawn Mower MR216518B MRP216518B User Manual
Stiga Lawn Mower 45EL User Guide
Stiga Lawn Mower TURBO 43 S COMBI User Guide
Weed Eater Lawn Mower 435073 User Guide