Dixon Lawn Mower 10504 1101 User Guide

ZEETER® CLASSIC  
ZTR®  
2002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
Page  
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11  
Warranty Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Seat Adjustment Instructions. . . . . . . . . . . . . . . . . . . . . . . . .14  
Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-17  
Operation Instructions. . . . . . . . . . . . . . . . . . . 18-27  
Care & Maintenance. . . . . . . . . . . . . . . . . . . . . .28-38  
Standard Service Parts List. . . . . . . . . . . . . . . . . . . .39  
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 40-41  
ZEETER Classic  
Part No. 10504-1101  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
RIDING LAWN MOWERS,  
IF IMPROPERLY OPERATED,  
CAN CAUSE SERIOUS INJURY OR DEATH.  
The most common causes of injury to the operator or bystander...  
BLADE CONTACT  
TIP OVER  
RUN OVER  
BACK OVER  
...read and understand this manual to prevent injuries.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
Safety Alert Symbol  
When you see this symbol,  
BE ALERT to the potential for injury.  
Follow recommended safety precautions  
and safe operating practices.  
DANGER  
(highlighted in red)  
indicates an imminently hazardous  
situation which, if not avoided, will  
result in death or serious injury.  
WARNING  
(highlighted in orange)  
indicates a potentially  
hazardous situation which, if not  
avoided, could result in death or  
serious injury.  
CAUTION  
(highlighted in yellow)  
indicates a potentially  
hazardous situation which, if not  
avoided, may result in minor or  
moderate injury. It may also be used  
to alert against unsafe practices.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
Failure to observe the following safety  
instructions could result in serious injury or death.  
GENERAL OPERATION:  
Read, understand, and follow all instructions in the  
manual and on the mower before starting.  
•Only allow responsible adults, who are familiar with  
the instructions, to operate the mower.  
•Clear the area of objects such as rocks, toys, wire,  
etc., which could be picked up & thrown by the blade.  
•Be sure the area is clear of other people before  
mowing. Stop mower if anyone enters the area.  
•NEVER carry passengers.  
•Do not mow in reverse unless absolutely necessary.  
Always look down & behind before & while backing.  
•Be aware of the mower discharge direction and do  
not point it at anyone.  
•Do not operate the mower without either the entire  
grass catcher or the deflector in place.  
•Slow down before turning.  
•Never leave a running mower unattended. Always  
turn off blades, set parking brake, stop engine and  
remove key before dismounting.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
GENERAL OPERATION (continued):  
•Turn off blades when not mowing.  
•Stop engine before removing grass catcher or  
unclogging chute.  
•Mow only in daylight or good artificial light.  
•Do not operate the mower while under the  
influence of alcohol or drugs.  
Watch for traffic when operating near or  
crossing roadways.  
•Use extra care when loading or unloading the  
mower into a trailer or truck. Do not ride the  
mower when loading and unloading.  
•Always wear safety goggles or safety glasses  
with side shields when operating mower.  
•Data indicates that operators, age 60 years  
and above, are involved in a large percentage of  
riding mower-related injuries. These operators  
should evaluate their ability to operate the riding  
mower safely enough to protect themselves  
and others from serious injury.  
•Follow the manufacturers recommendation for  
wheel weights and counterweights.  
•Maintain or replace safety & instruction labels  
as needed.  
The engine exhaust from this product contains chemicals known to the  
State of California to cause cancer, birth defects or other reproductive  
harm.  
WARNING:  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SLOPE OPERATION:  
Slopes are a major factor related to loss-of-control and tip-over  
accidents, which can result in severe injury or death.  
All slopes require extra caution.  
If you cannot back up the slope or if you feel uneasy on it,  
do not mow it!  
DO  
Mow across the slope with your Dixon ZTR - never up or down.  
Remove obstacles such as rocks, tree limbs, etc.  
Watch for holes, ruts or bumps. Uneven terrain could overturn the  
mower. Tall grass can hide obstacles.  
Use slow speed. Tires may lose traction on slopes even though the  
brakes are functioning properly.  
Use extra care with grass catchers or other attachments. These can  
change the stability of the mower.  
Keep all movement on the slopes slow and gradual. Do not make  
sudden changes in speed or direction.  
Avoid starting or stopping on a slope. If tires lose traction, disengage  
the blades and proceed slowly down the slope.  
If front wheels lift off the ground, pull the levers back to stabilize the  
mower.  
DO NOT  
Do not turn on slopes unless necessary, and then, turn slowly and  
gradually downhill, if possible.  
Do not mow near drop-offs, ditches, or embankments. The mower  
could suddenly turn over if a wheel is over the edge of a cliff or ditch,  
or if an edge caves in.  
Do not mow on wet grass. Reduced traction could cause sliding.  
Do not try to stabilize the mower by putting your foot on the ground.  
Do not use grass catcher on steep slopes.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
CHILDREN:  
Tragic accidents can occur if the operator is  
not alert to the presence of children.  
Children are attracted to lawn mowers  
and the mowing activity.  
NEVER assume children will stay  
where they were last seen.  
Be alert to avoid accidents.  
Keep children out of the mowing area and under the  
watchful care of another responsible adult.  
•Be alert and turn mower off if a child enters the  
area.  
•Before and during backing, look BEHIND and DOWN for  
small children.  
•Never carry children. They may fall off and be seriously  
injured or interfere with safe mower operation.  
•Never allow children to operate the mower.  
•Use extra care when approaching blind corners, shrubs,  
trees, or other objects that may obscure vision.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SERVICE:  
•Use extra care in handling gasoline and other fuels.  
They are flammable and vapors are explosive.  
Use only an approved container.  
Never remove fuel cap or add fuel with engine  
running. Allow engine to cool before refueling.  
Do not smoke while refueling.  
Never refuel the mower indoors.  
Never store the mower or fuel container inside  
a building where there is an open flame.  
If fuel is spilled on clothing, change clothing  
immediately.  
To prevent fire and explosion caused by static  
electricity:  
Never fill containers inside a vehicle or on a truck  
or trailer bed with a plastic liner. Always place  
containers on the ground away from your vehicle  
before filling.  
When practical, remove fuel-powered equipment  
from the truck or trailer and refuel it on the  
ground. If this is not possible, then refuel such  
equipment on a trailer with a portable container,  
rather than from a fuel dispenser nozzle.  
If a fuel dispenser nozzle must be used, keep the  
nozzle in contact with the rim of the fuel tank or  
container opening at all times until fueling is  
complete. Do not use a nozzle lock-open device.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SERVICE (continued):  
•Never run a mower inside a closed area. The  
exhaust fumes are toxic.  
•Keep nuts and bolts tight, especially blade  
attachment bolts, and keep equipment in good  
condition.  
•Never tamper with safety devices. Check their  
proper operation regularly.  
•Keep mower free of grass, leaves, or other  
debris buildup. Clean up oil or fuel spillage. Allow  
mower to cool before storing.  
•Stop and inspect the equipment if you strike an  
object. Repair, if necessary, before restarting.  
•Never make adjustments or repairs with the  
engine running unless otherwise specified.  
•Grass catcher components are subject to wear,  
damage and deterioration, which could expose  
moving parts or allow objects to be thrown.  
Frequently check components and replace with  
original equipment parts, when necessary.  
•Mower blades are sharp and can cut. Wrap  
the blade(s) or wear gloves, and use extra caution  
when servicing them.  
•Batteries contain sulfuric acid. To prevent burns  
avoid contact with skin, eyes and clothing. To  
prevent a fire or explosion keep sparks and open  
flames away from battery.  
•Before disconnecting the negative (-) ground cable,  
make sure all switches are OFF.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIXON INDUSTRIES, INC.  
a BLOUNT company  
Airport Industrial Park  
P.O. Box 1569  
Coffeyville, Ks 67337- 0945  
620-251-2000  
Fax 620-251-4117  
DIXON LIMITED WARRANTY POLICY  
3000 & 4000 Series & ZEETER Classic  
WARRANTY: Home Owner Application: This Dixon Warranty term is for a period of two (2) years  
from date of purchase. Commercial Application: Dixon mowers used for commercial application  
are warranted for 30 days from the date of purchase. Commercial use is specified as use other  
than, or in addition to, mowing at owners primary place of residence.  
DIXON ZTR MOWERS ARE WARRANTED AGAINST DEFECTS IN MATERIALS  
AND WORKMANSHIP AND PROVIDES FOR REPLACEMENT OR REPAIR OF  
PARTS INCLUDING LABOR COSTS. THIS WARRANTY IS SUBJECT TO THE  
FOLLOWING CONDITIONS  
AND LIMITATIONS:  
1. Warranty applies only to original retail purchaser of new and unused mowers and accessories.  
2. All Dixon warranty must be accomplished by authorized Dixon dealers and in accordance with Dixon  
warranty policy and allowances. All warranty claims must be approved by Dixon Industries, Inc.  
3. Battery warranty: Limited to 90 days from date of purchase.  
4. Accessories Warranty (Grass Catchers, Snow Blades, Covers, etc.): Limited to 90 days from date of  
purchase.  
5. Warranty does not apply to damage in transit or incidents of misuse, negligence, accidents, or  
alteration. The use of parts or components other than those supplied by Dixon Industries, Inc. VOIDS  
ALL WARRANTY.  
6. The following items are not covered by this warranty policy:  
a.  
Pick up and delivery charges for transportation of mower to and from an authorized Dixon  
dealers place of business.  
b.  
c.  
d.  
Transaxle adjustments.  
Belts/ chains/ sprockets/ cutting blades.  
Engines - All engines used on Dixon ZTR mowers are warranted by the individual engine  
manufacturer.  
Any costs or expense of providing substitute equipment while repair work is being  
performed on a warranted mower.  
e.  
7. There is no other express warranty. Implied warranties, including those of merchantability and fitness  
for a particular purpose, are limited to the same duration of the express warranty, and to the extent  
permitted by law any and all implied warranties are excluded. Liabilities for consequential damages  
under any and all warranties are excluded.  
Blue/ Customer Yellow/ Dealer White/ Dixon Ind.  
WARRANTY VALIDATION: At the time of sale, selling dealer must review each portion of this warranty  
document, complete the information section below, secure customers signature & send copy to Dixon  
Industries, Inc.  
DATE OF PURCHASE____________________MODEL___________________S/ N_______________  
_____________________________________  
Owners Name  
______________________________________  
Dealership  
_____________________________________  
Address  
______________________________________  
Address  
______________________________________  
_______________________________________  
_____________________________  
______________________________  
Owners Signature  
Dealers Signature  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Model ZEETER Classic  
CHASSIS:  
BODY:  
11 GA welded rectangular tubing  
All body parts made of high density polyethylene. Dent  
and corrosion resistant. Front body contains access  
panel for battery service.  
MOWER DECK:  
13 GA stamped steel construction. Three blades  
combine for a 42” cut width. Cut height approximately  
1- 4via 7-position lift handle.  
BLADE DRIVE:  
Electric clutch.  
TRANSMISSION:  
Each rear wheel is independently driven by chain and  
sprockets through a mechanical friction drive.  
ENGINE:  
13.5 HP Briggs & Stratton Intek, 4-Cycle, Single Cylinder,  
Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft with  
Cast Iron Cylinder, AVS (Anti-Vibration System), Pressure  
Lube & Filter.  
STARTING SYSTEM:  
TIRES:  
Electric by key switch operation with safety interlock  
blade drive.  
Front 11 x 4.00-5 ribbed tread.  
Rear  
18 x 8.50-8 Turf Trac R/ S  
RECOMMENDED  
TIRE PRESSURE:  
Front 16-21 PSI  
Rear  
Fuel  
8-14 PSI  
CAPACITIES:  
DIMENSIONS:  
2.4 gallons total  
Engine 1.5 quarts oil  
Width 47” outside rear wheel measurement  
Height 42” to top edge of seat  
Length 72” hitch tab to front bumper  
Weight 520 lbs.  
Additional information provided in service instructions under the individual component.  
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEAT ADJUSTMENT INSTRUCTIONS  
Model ZEETER Classic  
1.  
2.  
Raise and push seat assembly forward.  
Loosen seat adjustment knobs and slide  
seat forward or backward to desired  
position.  
3.  
4.  
Re-tighten nuts. DO NOT operate mower  
without seat adjustments properly  
tightened.  
Push seat assembly back to closed  
position.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
The Dixon ZTR has a unique transaxle that requires only two drive levers to  
control braking, turning, speed and direction.  
On initial operation, set throttle speed on slow. Operate with mower  
blade in “OFF” position.  
To avoid “over-controlling” the mower, use a light touch on the drive  
levers.  
Slight movements using fingertip control is all that is necessary.  
PARKING BRAKE:  
The parking brake is designed to hold the mower  
from moving and is not intended for use in stopping the  
mower while it is in motion.  
Engage parking brake  
before starting engine.  
CAUTION  
TO SET PARKING BRAKE:  
The hand operated parking brake is located on the right  
end of the mower.  
To engage brake, pull lever up (to the rear).  
To release brake, move lever forward (down).  
NOTE: Always set parking brake before dismounting.  
Release parking brake before moving mower.  
TRANSMISSION DRIVE SYSTEM  
Allows the mower to turn on its own axis “ZERO TURNING RADIUS”. Each lever  
controls one side of the mower.  
NOTE: The pressure required to operate the mower is very light.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
CONTROL LEVERS  
TO GO FORWARD:  
From neutral position, gently push both control levers forward.  
To increase speed, move levers further forward.  
TO GO BACKWARD:  
From neutral position, gently pull both control levers toward you.  
TURNING:  
Turning is controlled by moving one control lever slightly forward or  
rearward of the other.  
To turn left, move left lever rearward of the right lever.  
To turn right, move right lever rearward of the left lever.  
To turn on mowers own axis (zero turning radius), stop and move one  
lever to reverse position and the other to forward position.  
BRAKING:  
To brake mower, move both levers in direction opposite of travel.  
LEFT TURN OPPOSITE  
Note: The pressure required to operate the mower is very light.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
BLADE DRIVE:  
Located on the control panel, on the  
operators right.  
To engage the mower blades, pull up on  
the switch.  
To disengage mower blade, push down.  
CIRCUIT BREAKER:  
Protection of the electrical system is by  
(1) 15 amp circuit breaker.  
If circuit breaker trips, push button to  
reset.  
If this condition repeats, consult dealer  
for inspection and repair.  
THROTTLE CONTROL LEVER:  
Located on control panel to operators right.  
Throttle control for engine speed.  
Choke for engine starting.  
Throttle control should be set to MAXIMUM  
or wide open setting to ensure adequate  
cooling of the engine and to maintain mower  
deck blade speed while mowing.  
MOWER DECK LIFT LEVER:  
Located to the right of the control levers.  
Controls the cutting height.  
Eight positions of adjustment.  
Move lever left and forward to lower.  
Move lever left and back to raise.  
NOTE: Always use high for transport.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
The safe and successful operation of the  
ZEETER Classic mower will depend upon the  
operator having the correct knowledge of  
all controls used on the mower and making  
good judgements about the terrain to be  
mowed.  
NEVER allow anyone to operate the mower  
without complete knowledge of all controls  
and their functions.  
During initial operation, learning to drive,  
set throttle at slow speed.  
Sound judgement by the operator will  
prevent accidents.  
TOWING:  
Towing a trailer or other attachment that is  
too heavy could damage the drive or cause  
the mower to become unstable. Limit loads  
to 250 pounds or less with this mower.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
BEFORE OPERATING MOWER:  
1.  
Read and observe all safety instructions on  
your mower and in the manual.  
2.  
Read engine manufacturers operating and  
maintenance instructions.  
3.  
4.  
5.  
6.  
7.  
Check engine oil.  
Check fuel cap to be sure it is in place.  
Be sure parking brake is on.  
Mower blade drive is off.  
Know how to stop engine. (Turn key to off  
position).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
TESTING OF SAFETY INTERLOCK SYSTEMS:  
Do not operate mower if safety switches are not operating properly.  
BLADE DRIVE SWITCH TEST:  
a) Engage blade drive switch.  
b) Turn ignition switch to START.  
ENGINE SHOULD NOT TURN OVER  
OR ATTEMPT TO START!  
SEAT SWITCH TEST:  
a) In a SAFE AREA away from bystanders,  
start the engine.  
b) Engage blade drive switch.  
c) Raise slightly off seat.  
ENGINE SHOULD STOP!  
If any safety check fails: Do not operate the mower  
until the system has been checked and repaired  
by an authorized Dixon ZTR dealer!  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
STARTING INSTRUCTIONS:  
1.  
2.  
Parking brake must be on, and blade drive disengaged.  
Move throttle control to choke” position if engine is cold,  
full throttle if warm.  
3.  
Insert ignition key and turn to start” position. When  
engine starts, release ignition key. Key will return to  
run” position.  
4.  
5.  
6.  
Move throttle from choke” to desired speed position.  
Release parking brake.  
Operate the mower per the CONTROL” instructions on  
Page 16.  
CAUTION  
Do not operate the engine in an enclosed area  
due to the harmful exhaust gas produced.  
Note: When mowing, blade(s) engaged, throttle control must be set  
to the MAXIMUM or wide open setting to insure adequate cooling  
of the engine and to maintain mower deck blade speed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
SIDE DISCHARGE OF THE CLIPPINGS:  
In order to achieve optimum performance when side discharging  
the grass clippings, please read and follow the tips listed below.  
Additional information can be found in the troubleshooting guide.  
CAUTION  
Be sure that the deflector is properly  
installed on the discharge chute.  
1,  
2.  
Set engine speed control to the wide open or full  
setting.  
Do Not Attempt To Cut Grass When It Is Wet.  
Wet grass will clog the underside of the deck  
and discharge area.  
3.  
If the grass is tall, place the mower deck cut  
height lever in the top or second notch. Initially”  
overlap cutting swaths instead of a full swath  
with each pass. Some applications may  
require a second cutting.  
4.  
5.  
Keep The Underside Of The Mower Deck Clean.  
Frequent removal of dried grass and dirt will  
allow the clippings to discharge correctly.  
Maintain Sharp Blade(s) Throughout The Cutting  
Season.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
GRASS HEIGHT AND CUTTING SUGGESTIONS:  
As a rule of thumb, never cut off more than 1/ 3 of the  
total grass blade length.  
Correct mowing height can reduce weeds and disease  
by 50% to 80%.  
The following grass cut heights are based on adequate  
moisture conditions and normal thatch build-up in a  
healthy lawn. Some locations and applications may  
require slightly different cut heights. If in doubt, consult  
your local lawn professional for assistance.  
Grass Types  
Bermudagrass  
Bluegrass  
Best Cut Heights  
1 - 2”  
2 - 3”  
Buffalograss  
Ryegrass  
11/ 2 -3”  
2 - 3”  
Tall Fescue  
Zoysiagrass  
3-31/ 2  
1 - 3”  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
MOWING WITH A MULCHING ATTACHMENT:  
Mulching or recycling the grass clippings requires a totally different  
mowing approach than would be normal when side discharging or  
bagging the grass. There may be instances or conditions where it is  
not possible to hide all of the recycled or mulched clippings.  
In order to achieve the best results, please read and follow the  
mulching tips listed below:  
1.  
Set the engine speed control to the wide open  
or full setting.  
2.  
Place the mower deck cut height selector in  
either the top or second notch. Never cut more  
than 3/ 4” to 1” off the grass at any one time.  
Attempting to cut more grass will result in the  
deck plugging and cause the engine to stall.  
3.  
It may be necessary to cut the lawn twice to  
achieve acceptable mulching performance  
especially on first cuttings or if the lawn is  
heavily fertilized.  
4.  
5.  
Do Not Attempt To Cut Grass When It Is Wet.  
Mulching performance will be very poor under  
wet grass conditions.  
Maintain Sharp Blade(s) Throughout The Cutting  
Season. This is very important. Optimal mulching  
performance cannot be obtained with a dull or  
nicked-up blade.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
MOWING WITH A MULCHING ATTACHMENT  
(continued):  
6.  
7.  
Keep the Underside Of The Mower Deck Clean.  
Remove all grass and dirt build-up from the  
underside of the pan, the baffles and deflectors  
after each use.  
Alternate mower direction. This will evenly  
disperse the mulched grass clippings over the  
lawn for even fertilization.  
If the mulching quality of the mower does not seem to be satisfactory,  
try one or more of the following tips:  
1.  
2.  
3.  
4.  
5.  
6.  
Raise the height-of-cut setting on your  
mower.  
It may be necessary to cut your grass  
more frequently.  
Operate the mower at a slower ground  
speed.  
Overlap cutting swaths instead of cutting  
a full swath with each pass.  
Mow across the marginal areas a second  
time.  
CUT HIGH - MOW OFTEN!  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
MOWING WITH A GRASS CATCHER ATTACHMENT:  
In order to achieve optimum performance when mowing with a grass  
catching attachment, please read and follow the tips listed below.  
1.  
2.  
Set engine speed control to the wide open or full  
setting and engage mower before entering area  
to be cut.  
Do Not Attempt To Cut Grass When It Is Wet.  
Wet grass will clog both the underside of the  
deck and the attachment chutes. Empty bags  
often to prevent plugging.  
3.  
If the grass is tall, place the mower deck cut  
height selector in the top or second notch.  
“Initially” overlap cutting swaths instead of a  
full swath with each pass.  
4.  
5.  
Keep The Underside Of The Mower Deck Clean.  
Frequent removal of dried grass and dirt will  
greatly assist in bagging of the clippings.  
Use only the correct blade(s). Some grass  
catching attachments require a high-lift blade.  
See your dealer for advice on the type of blade(s)  
needed for your mower.  
6.  
Maintain Sharp Blade(s) Throughout The Cutting  
Season.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION INSTRUCTIONS  
MOWING WITH A GRASS CATCHER ATTACHMENT  
(continued):  
7.  
8.  
Operate the mower at a slower ground speed  
than when mowing without a grass catching  
attachment.  
Some mowing applications/ use of grass  
catchers may require that an optional weight  
box be fitted to the mower to counter the weight  
of grass in the bags. Please consult with your  
dealer for more information regarding  
installation and adding weight to the box.  
CAUTION  
Watch for low hanging branches or other  
obstacles which might hit the catcher top while  
turning or backing the mower.  
Use care when backing to avoid pushing the  
grass bags into the frame or hot” exhaust  
muffler of the engine.  
Disengage blade and stop engine prior to  
clearing grass from either the discharge chute  
or grass catcher components.  
Keep all attachment bolts tight.  
Do Not operate the mower with the grass  
catching attachment partially removed.  
Important: Do Not leave clippings in the bags  
while the mower is stored. Damp grass clippings  
are a fire hazard if left in the bag.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
CAUTION  
Before performing any maintenance, turn off engine,  
allow to cool & remove key.  
Use extreme care when working on machinery.  
Do not wear watch or jewelry. Do not wear loose fitting clothes,  
and observe all common safety practices with tools.  
MAINTENANCE SCHEDULE  
Check deck serpentine belt...........................................after 2 0 hours break-in  
Check crankcase oil level..........................................................before each use  
Clean grass & debris from muffler & manifold area....................before each use  
Check air intake screen..............................................................after each use  
Clean grass under deck...............................................................after each use  
Check tire pressure......................................................................every 1 0 hours  
Inspect blades for sharpness.........................................................every 10 hours  
Clean air filter element................................................................every 2 5 hours  
Grease all zerks...........................................................................every 5 0 hours  
Check all belts..........................................................................................every 50 hours  
Change engine crankcase oil............................(5 hours break-in) every 50 hours  
Change engine oil filter..............................................................every 5 0 hours  
Replace air filter element..........................................annually or every 100 hours  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
ENGINE:  
For complete maintenance and operating information of the engine,  
please refer to the maintenance instructions furnished by the engine  
manufacturer and included in your Zero Turn Radius mower informa-  
tion packet.  
BATTERY:  
Battery contains sulfuric acid electrolyte which is  
poisonous and corrosive.  
CAUTION  
This is a maintenance-free battery and the fluid level cannot  
be checked.  
Charge battery if required.  
OFF SEASON BATTERY STORAGE:  
DO NOT remove battery from mower.  
Clean top of battery and terminals with baking soda and  
water.  
Identify each cable so they can be reconnected to the  
correct terminal.  
Disconnect cables from terminals. ALWAYS disconnect  
ground cable first and reconnect last.  
Charge battery.  
TIRES:  
Correct tire pressure is essential for efficient operation of the  
mower. Check tire pressure periodically. Inflate tires to the  
pressure listed below.  
Front Tires  
Rear Tires  
11 x 4.00-5 16-21 lbs. PSI  
18 x 8.50-8 8-14 lbs. PSI  
Lug nuts or lug bolts should be checked regularly for tightness.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
CUTTER BLADE MAINTENANCE:  
CAUTION  
Stop engine and remove ignition key for safety.  
Wear heavy, thick gloves when holding onto  
cutter blade. Avoid the sharp edge of the blade.  
Check sharpness of mower blades after every 10 hours of operation.  
Observe proper blade position prior to removal.  
1.  
2.  
3.  
4.  
Safely raise front of mower.  
Hold or block blade from turning.  
Loosen blade nut and remove blade.  
When replacing blade, tighten  
blade nut securely. Refer to diagram.  
Be sure blade is centered on pilot  
before tightening nut to 60 ft. lbs.  
Blades should be discarded when worn excessively.  
DANGEROUS!  
DO NOT USE  
BLADE IN THIS  
CONDITION!  
New Blade  
When notch starts,  
discard blade  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
BELTS:  
Check belts every 50 hours. Replace any belts found to  
be in poor condition.  
BELT TENSION:  
Transaxle Drive Belt:  
P/ N 1684  
P/ N 6111  
No adjustment required.  
Engine to Mower Deck Belt:  
No adjustment required. Correct belt tension is  
maintained through a fixed engine location and a  
spring loaded idler system. A pulsing movement of  
the belt idler will be observed both during engagement  
of the electric blade clutch and actual operation of the  
mower deck.  
Note: Engagement of the electric blade clutch switch  
may produce a sharp high pitched chirp or  
squeal as the belt tension loading is absorbed  
by the idler system. This is normal and not a  
sign of failure.  
Mower Deck Serpentine Belt:  
P/ N 6109  
Refer to illustration for adjustment procedure.  
Idler Weldment  
Idler Shock Mount  
“L” Rod  
Hex Nut  
3
4
Tighten or  
Loosen Hex  
Nut to  
achieve this  
dimension  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
MOWER DECK LEVELING PRCEDURE:  
1.  
Place mower on a smooth, level surface and check  
tire pressures to insure correct stance. Tires  
should be inflated as follows:  
Front: 16-21 lbs  
Rear: 8-14 lbs  
Turn each outer blade tip to align with the deck in  
a side to side manner.  
Measure from the floor surface up to the bottom  
of the blade tip on the discharge side of the  
mower.Retain this measurement. Move to the  
opposite side and check to see if that measure-  
ment is the same. If adjustment is required, turn  
nut on one or both of the rear L-rods until both  
measurements are equal.  
2.  
3.  
4.  
5.  
Turn each outer blade tip to align with the deck in  
a front to rear manner.  
Measure from the floor surface up to the bottom  
of the blade tips at both the front and rear of the  
blades. Rear of blade tips should be 1/ 8” to 3/ 8”  
higher than the front of blade tips. If adjustment is  
necessary, turn nut on front L-rod.  
Note: This will place the mower deck in a base  
measurement position. Additional adjustment may  
be required to achieve desired cut for the type of  
grass or conditions involved.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
DECK REMOVAL:  
1.  
2.  
Place cut height lever in lowest cut position.  
Pull belt idler back to allow belt to be removed  
from idler pulley and electric clutch pulley.  
3.  
4.  
5.  
Remove hair pin cotter and washer from one  
end of deck support cross shaft. Slide shaft  
from chassis and mower deck.  
Remove hair pin cotter and washer from each  
deck L-rod. Remove L-rods from lift arms. At this  
point, deck will drop down.  
Carefully raise and support front of chassis.  
Slide mower deck to either side for removal.  
(Reverse procedure to reinstall deck assembly.)  
Note: When deck is reinstalled on frame, check  
that belt is correctly routed in the groves  
of all pulleys and that belt idler is applying  
tension to the back side of the belt.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
HOT oil may cause burns. Allow  
engine to cool before draining oil.  
CAUTION  
CHANGING THE ENGINE OIL:  
1.  
2.  
The Dapco” oil drain valve is located on the left  
side of the engine crankcase.  
Place a suitable container under the drain valve.  
The fitting of a short piece of hose will help direct  
the oil.  
3.  
To drain, turn hex head valve stem counter--  
clockwise with 10mm wrench or socket. Open  
to full open (approximately 7 turns).  
4.  
After engine is drained, tighten hex stem.  
NOTE: Refer to engine manufacturers recommendations  
for frequency of oil changes.  
Hex Head Valve Stem  
OIL FILL:  
1.  
Drain oil.  
2.  
3.  
Clean any spilled oil from engine and chassis.  
Refill engine with type, and quantity of oil  
recommended by the engine manufacturer in  
engine literature.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
DRIVE SYSTEM ADJUSTMENTS:  
Due to both the complex nature of the transmission  
and the number of special tools required for service,  
adjustments should be entrusted to your dealer.  
There are a number of simple owner service items  
which greatly influence the performance of the drive  
system.  
1. Front and rear tires must be inflated to proper  
specifications.  
2. Rear drive chain tension.  
3, Tightness of all controls and linkages pertaining  
to the drive levers.  
4. Lubrication of both primary and final drive chains.  
The use of a high quality chain lubricant is highly  
recommended.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
REAR CHAIN ADJUSTMENT:  
To adjust the rear drive chains on the Zeeter Classic,  
tighten the nut on top of the spring on each side of  
the mower chassis. Tighten until the chains have  
approximately 1/ 4” movement up and down when  
measured at a mid point. Refer to illustration.  
NOTE: Adjust rear drive chains after first 10 hours of  
operation and every 40 hours thereafter.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
LUBRICATION:  
CHASSIS:  
(7) grease zerks used  
LOCATIONS:  
(1) each front wheel caster & front  
wheel hub  
(1) each mower deck hub  
SERVICE INTERVALS:  
Every 50 hours of operation  
RECOMMENDED GREASE: Name brand wheel bearing or  
multi-purpose grease. Once  
per season or 50 hours of  
operation (3 pumps each)  
Note: Lubrication of the mower deck hubs will help dispel moisture  
within the hub casting. Bearings are of a sealed variety.  
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.  
PROTECT YOUR ENVIRONMENT.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
ELECTRICAL SYSTEMS:  
Keep all connections clean and tight.  
CLEANING THE MOWER:  
Wash mower periodically. Clean above and below deck.  
Note: Allow mower to cool before washing. If bearings  
are hot, they will draw moisture inside as they  
dry & cause corrosion.  
SERIAL NUMBERS:  
The serial number is located on frame at rear of engine.  
WARRANTY:  
See Warranty Registration Form-P/ N 8288  
(sample on page 12).  
PARTS/ SERVICE:  
See your Dixon dealer for replacement parts, warranty or  
service.  
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL  
CHEMCIALS WHICH MAY DAMAGE OR CAUSE HARM TO  
PLANTS AND ANIMALS IN YOUR AREA.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STANDARD SERVICE PARTS LIST  
Blades:  
Belts:  
P/ N 8688 (Standard/ Hi-Lift)  
P/ N 6236 (Lo-Lift)  
Engine to Mower Deck - P/ N 6111  
Engine to Transmission - P/ N 1684  
Serpentine Blade Drive - P/ N 1684  
BRIGGS & STRATTON AIR AND OIL FILTER PART NUMBERS:  
Refer to engine manufacturers manual for correct service  
intervals for engine oil changes and air filter maintenance.  
Protect your engine investment, use only original equipment  
filters.  
Air Filter & Pre-Cleaner Kit - P/ N 79002  
Oil Filter - P/ N 79006  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
1.  
ENGINE WON’T TURN OVER  
Mower blades engaged- - - - - - - - - - - - - - - - - - - - - - -disengage blades  
Circuit Breaker Trips- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -reset breaker  
Dead battery- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - charge or replace  
Solenoid- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer  
Ignition switch- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer  
Starter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer  
2.  
3.  
ENGINE WILL TURN OVER BUT WON’T START  
No fuel- - - - - - - - - - - - - - - refuel and/ or clean or replace fuel filters  
HARD TO START ENGINE  
Fuel line clogged- - - - - - - - - - - - - clean fuel line and check fuel filter  
Faulty fuel pump- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer  
4.  
5.  
ENGINE STARTS BUT CUTS OUT  
Water in fuel- - - - - - - - - - - - - - - -drain old fuel-replace with new fuel  
Clogged fuel line- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -check fuel filter  
Fuel tank vent plugged- - - - - - - - - - - - - - - - - - - - - - - - - - - -clean fuel vent  
Faulty fuel pump- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - check vent  
ENGINE OVERHEATED  
Air intake screen or fins clogged- - - - - -clean intake screen and fins  
Oil level too low or too high- - - - - - - - - - - - - - - - - - - - - - - - - adjust oil level  
Running engine too slow - - - - - - - - - - - - - - - - - - - - - - - -run engine faster  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
6.  
7.  
8.  
ENGINE RUNS BUT MOWER WON’T MOVE FORWARD  
Drive belt broken or slipping- - - - - - - - - - - - - - - - - - - - replace drive belt  
Bad transmission- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer  
MOWER LOSES POWER OR TRANSMISSION OVERHEATS  
Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -clean or replace  
Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer  
ENGINE STALLS WHEN BLADES ARE ENGAGED  
Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -sit on seat  
Faulty interlock system- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer  
Bad blade spindle bearing - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer  
Deck drive belt not properly routed- - - - - - - - - - - - - - - - - - - - - - - reroute  
Blades blocked by foreign material - - - - - - - - - - - - - -clean under deck  
9.  
DRIVE SYSTEM  
Low on power- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - check belt tension  
Mower pulls to side - - - -check tire inflation/ adjust control linkage  
Mower creeps in neutral- - - - - - - - - - - - - - - - - - - -adjust control linkage  
10.  
CUT QUALITY  
Skips in spots- - - - - - - - - - - - check for loose belt/ slow ground speed  
Cut uneven left to right - - - - - - - - -check tire inflation/ level the deck  
Poor dispersal of grass- - - - - - - - - - -clean deck/ check for loose belt  
Ends of grass blades are ragged- - - - - - - - - - - - - - - - - -sharpen blades  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OWNER  
INFORMATION  
DIXON INDUSTRIES, INC.  
a BLOUNT International Inc. Co.  
P.O. Box 1569  
Coffeyville, Ks 67337-0945  
620-251-2000  
FAX 620-251-4117  
Date Purchased _________________________________  
Mower Model Number ____________________________  
Mower Serial Number ____________________________  
Purchased From ________________________________  
Name  
________________________________  
Address  
________________________________  
DATE OIL CHANGED:  
DATE ENGINE TUNED:  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
___________________  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZTR®Mowers  
The engine exhaust from this product contains chemicals known  
to the State of California to cause cancer, birth defects or other  
reproductive harm.  
WARNING:  
Dixon® and ZTare registered trademarks of Dixon Industries, Inc.  
DIXON INDUSTRIES, INC.  
a BLOUNT International Inc. Co.  
P.O. Box 1569  
Coffeyville, Ks 67337-0945  
620-251-2000  
ZEETER Classic  
Part No. 10504-1101  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Alliance Laundry Systems Lawn Mower CHM1772C User Manual
Bolens Lawn Mower 110 670A User Manual
Bolens Lawn Mower 114 030A User Manual
Exmark Lawn Mower Metro User Guide
Husqvarna Lawn Mower LGT24K54 User Manual
Poulan Lawn Mower 183981 User Guide
Snapper Lawn Mower 2811X5S User Manual
Snapper Lawn Mower 1600236 User Manual
Snapper Lawn Mower FC Series User Manual
Snapper Lawn Mower WLT145H38GBV User Manual