Cub Cadet Lawn Mower 190 190 100 User Guide

Operator’s Manual  
Triple Bagger Kit  
Model 190-190-100  
Model 190-192-190  
IMPORTANT: Read safety rules and instructions carefully  
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered,  
brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state  
laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the  
above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply  
on federal lands. A spark arrester for the muffler is available through your Cub Cadet dealer or contact the service department, P.O. Box  
361131 Cleveland, Ohio 44136-0019.  
Cub Cadet LLC., P.O. Box 361131, Cleveland, OH 44136-0019  
769-01136
(4/2004)  
FORM NO.  
PRINTED IN U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES  
WARNING: This symbol points out important safety instructions which, if not followed, could endanger  
the personal safety and/or property of yourself and others. Read and follow all instructions in this manual  
before attempting to operate this machine. Failure to comply with these instructions may result in personal  
injury. When you see this symbol—heed its warning.  
WARNING: The Battery and Engine Exhaust contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm. The battery and posts contain lead;  
wash hands after handling.  
WARNING: This machine was built to be operated according to the rules for safe operation in this  
manual. As with any type of power equipment, carelessness or error on the part of the operator can result in  
serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to  
observe the following safety instructions could result in serious injury or death.  
11. A missing or damaged discharge cover can cause blade  
contact or thrown object injuries.  
12. Stop the blade(s) when crossing gravel drives, walks, or  
roads and while not cutting grass.  
13. Watch for traffic when operating near or crossing  
General Operation  
1. Read, understand, and follow all instructions on the  
machine and in the manual(s) before attempting to  
assemble and operate. Keep this manual in a safe place  
for future and regular reference and for ordering  
roadways. This machine is not intended for use on any  
replacement parts.  
public roadway.  
2. Be familiar with all controls and their proper operation.  
14. Do not operate the machine while under the influence of  
Know how to stop the machine and disengage them  
alcohol or drugs.  
quickly.  
15. Mow only in daylight or good artificial light.  
16. Never carry passengers.  
17. Disengage blade(s) before shifting into reverse. Back up  
3. Never allow children under 14 years old to operate this  
machine. Children 14 years old and over should read and  
understand the operation instructions and safety rules in  
slowly. Always look down and behind before and while  
this manual and should be trained and supervised by a  
backing to avoid a back-over accident.  
parent. Never allow adults to operate this machine  
without proper instruction.  
18. Slow down before turning. Operate the machine  
smoothly. Avoid erratic operation and excessive speed.  
4. To help avoid blade contact or a thrown object injury,  
19. Disengage blade(s), set parking brake, stop engine and  
keep bystanders, helpers, children and pets at least 75  
wait until the blade(s) come to a complete stop before  
feet from the machine while it is in operation. Stop  
removing grass catcher, emptying grass, unclogging  
machine if anyone enters the area.  
5. Thoroughly inspect the area where the equipment is to be  
chute, removing any grass or debris, or making any  
adjustments.  
used. Remove all stones, sticks, wire, bones, toys, and  
other foreign objects which could be picked up and  
20. Never leave a running machine unattended. Always turn  
off blade(s), place transmission in neutral, set parking  
thrown by the blade(s). Thrown objects can cause  
brake, stop engine and remove key before dismounting.  
serious personal injury.  
21. Use extra care when loading or unloading the machine  
6. Plan your mowing pattern to avoid discharge of material  
into a trailer or truck. This unit should not be driven up or  
toward roads, sidewalks, bystanders and the like. Also,  
down ramp(s), because the unit could tip over, causing  
avoid discharging material against a wall or obstruction  
which may cause discharged material to ricochet back  
toward the operator.  
serious personal injury. The unit must be pushed  
manually on ramp(s) to load or unload properly.  
22. Muffler and engine become hot and can cause a burn. Do  
7. Always wear safety glasses or safety goggles during  
not touch.  
operation and while performing an adjustment or repair to  
protect your eyes. Thrown objects which ricochet can  
23. Check overhead clearances carefully before driving  
under low tree branches, wires, door openings etc.,  
cause serious injury to the eyes.  
where the operator may be struck or pulled from the unit,  
8. Wear sturdy, rough-soled work shoes and close-fitting  
which could result in serious injury.  
slacks and shirts. Loose fitting clothes and jewelry can be  
caught in movable parts. Never operate this machine in  
24. Disengage all attachment clutches, depress the brake  
pedal completely and shift into neutral before attempting  
bare feet or sandals.  
to start engine.  
9. Be aware of the mower and attachment discharge  
25. Your machine is designed to cut normal residential grass  
direction and do not point it at anyone. Do not operate the  
of a height no more than 10”. Do not attempt to mow  
mower without the discharge cover or entire grass  
through unusually tall, dry grass (e.g., pasture) or piles of  
catcher in its proper place.  
dry leaves. Dry grass or leaves may contact the engine  
10. Do not put hands or feet near rotating parts or under the  
exhaust and/or build up on the mower deck presenting a  
cutting deck. Contact with the blade(s) can amputate  
potential fire hazard.  
hands and feet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
26. Use only accessories and attachments approved for this  
machine by the machine manufacturer. Read,  
understand and follow all instructions provided with the  
accessory or attachment.  
27. Data indicates that operators, age 60 years and above,  
are involved in a large percentage of tractor-related  
injuries. These operators should evaluate their ability to  
operate the tractor safely enough to protect themselves  
and others from serious injury.  
dump cart, lawn roller, etc.) on slopes greater than 5  
degrees. When going down hill, the extra weight tends to  
push the tractor and may cause you to loose control. (e.g.  
tractor may speed up, braking and steering ability are  
reduced, attachment may jack-knife and cause tractor to  
overturn).  
Children  
1. Tragic accidents can occur if the operator is not alert to  
the presence of children. Children are often attracted to  
the machine and the mowing activity. They do not  
understand the dangers. Never assume that children will  
remain where you last saw them.  
28. If situations occur which are not covered in this manual,  
use care and good judgment. Contact your Yard-Man  
dealer for assistance.  
Slope Operation  
a. Keep children out of the mowing area and in  
watchful care of a responsible adult other than the  
operator.  
b. Be alert and turn machine off if a child enters the  
area.  
Slopes are a major factor related to loss of control and tip-  
over accidents which can result in severe injury or death. All  
slopes require extra caution. If you cannot back up the slope  
or if you feel uneasy, do not mow it.  
c. Before and while backing, look behind and down  
for small children.  
d. Never carry children, even with the blade(s) shut  
off. They may fall off and be seriously injured or  
interfere with safe machine operation.  
For your safety, use the slope gauge included as part of this  
manual to measure slopes before operating this unit on a  
sloped or hilly area. If the slope is greater than 15 degrees as  
shown on the slope gauge, do not operate this unit on that  
area.  
e. Use extreme care when approaching blind  
corners, doorways, shrubs, trees or other objects  
that may block your vision of a child who may run  
into the machine.  
f. Disengage the cutting blade(s) before shifting in  
reverse. The “No-Cut-In Reverse” feature  
emphasises not to cut in reverse and to avoid  
back-over accidents; do not defeat it.  
g. Keep children away from hot or running engines.  
They can suffer burns from a hot muffler.  
h. Remove key when machine is unattended to  
prevent unauthorized operation.  
Do:  
1. Mow up and down slopes, not across. Exercise extreme  
caution when changing direction on slopes.  
2. Watch for holes, ruts, bumps, rocks, or other hidden  
objects. Uneven terrain could overturn the machine. Tall  
grass can hide obstacles.  
3. Use slow speed. Choose a low enough speed setting so  
that you will not have to stop or shift while on the slope.  
Tires may lose traction on slopes even though the brakes  
are functioning properly. Always keep machine in gear  
when going down slopes to take advantage of engine  
braking action.  
4. Follow the manufacturer’s recommendations for wheel  
weights or counterweights to improve stability of the  
machine. Use extra care with grass catchers or other  
attachments. These can change stability of the machine.  
5. Keep all movement on the slopes slow and gradual. Do  
not make sudden changes in speed or direction. Rapid  
engagement or braking could cause the front of the  
machine to lift and rapidly flip over backwards which  
could cause serious injury.  
9. Never allow children under 14 years old to operate the  
machine. Children 14 years old and over should read and  
understand the operation instructions and safety rules in  
this manual and should be trained and supervised by a  
parent.  
Towing  
1. Tow only with a machine that has a hitch designed for  
towing. Do not attach towed equipment except at the  
hitch point.  
2. Follow the manufacturers recommendation for weight  
limits for towed equipment and towing on slopes.  
3. Never allow children or others in or on towed equipment.  
4. On slopes, the weight of the towed equipment may cause  
loss of traction and loss of control.  
6. Avoid starting or stopping on a slope. If tires lose traction,  
disengage the blade(s) and proceed slowly straight down  
the slope.  
Do Not:  
1. Do not turn on slopes unless necessary; then, turn slowly  
and gradually downhill, if possible.  
5. Travel slowly and allow extra distance to stop.  
6. Do not shift to neutral and coast downhill.  
2. Do not mow near drop-offs, ditches or embankments.  
The mower could suddenly turn over if a wheel is over the  
edge of a cliff, ditch, or if an edge caves in.  
3. Do not try to stabilize the machine by putting your foot on  
the ground.  
4. Do not use a grass catcher on steep slopes.  
5. Do not mow on wet grass. Reduced traction could cause  
sliding.  
Service  
Safe Handling Of Gasoline  
1. To avoid personal injury or property damage use extreme  
care in handling gasoline. Gasoline is extremely  
flammable and the vapors are explosive. Serious  
personal injury can occur when gasoline is spilled on  
yourself or your clothes which can ignite. Wash your skin  
and change clothes immediately.  
6. Do not shift to neutral and coast downhill. Over-speeding  
may cause the operator to lose control of the machine  
resulting in serious injury or death.  
a. Use only an approved gasoline container.  
b. Never fill containers inside a vehicle or on a truck  
7. Do not tow heavy pull behind attachments (e.g. loaded  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
or trailer bed with a plastic liner. Always place  
containers on the ground away from your vehicle  
before filling.  
complete stop within approximately (5) five seconds after  
operating the blade disengagement control. If the blades  
do not stop within the this time frame, your unit should be  
serviced professionally by an authorized dealer.  
4. Check brake operation frequently as it is subjected to  
wear during normal operation. Adjust and service as  
required.  
5. Check the blade(s) and engine mounting bolts at  
frequent intervals for proper tightness. Also, visually  
inspect blade(s) for damage (e.g., excessive wear, bent,  
cracked).  
c. When practical, remove gas-powered equipment  
from the truck or trailer and refuel it on the ground.  
If this is not possible, then refuel such equipment  
on a trailer with a portable container, rather than  
from a gasoline dispenser nozzle.  
d. Keep the nozzle in contact with the rim of the fuel  
tank or container opening at all times until fueling  
is complete. Do not use a nozzle lock-open  
device.  
e. Extinguish all cigarettes, cigars, pipes and other  
sources of ignition.  
f. Never fuel machine indoors.  
g. Never remove gas cap or add fuel while the  
engine is hot or running. Allow engine to cool at  
least two minutes before refueling.  
Replace the blade(s) with the original equipment  
manufacturer’s (O.E.M.) blade(s) only, listed in this  
manual. “Use of parts which do not meet the original  
equipment specifications may lead to improper  
performance and compromise safety!”  
6. Mower blades are sharp. Wrap the blade or wear gloves,  
and use extra caution when servicing them.  
h. Never over fill fuel tank. Fill tank to no more than  
½ inch below bottom of filler neck to allow space  
for fuel expansion.  
i. Replace gasoline cap and tighten securely.  
j. If gasoline is spilled, wipe it off the engine and  
equipment. Move unit to another area. Wait 5  
minutes before starting the engine.  
k. To reduce fire hazards, keep machine free of  
grass, leaves, or other debris build-up. Clean up  
oil or fuel spillage and remove any fuel soaked  
debris.  
l. Never store the machine or fuel container inside  
where there is an open flame, spark or pilot light  
as on a water heater, space heater, furnace,  
clothes dryer or other gas appliances.  
m. Allow a machine to cool at least 5 minutes before  
storing.  
7. Keep all nuts, bolts, and screws tight to be sure the  
equipment is in safe working condition.  
8. Never tamper with the safety interlock system or other  
safety devices. Check their proper operation regularly.  
9. After striking a foreign object, stop the engine, disconnect  
the spark plug wire(s) and ground against the engine.  
Thoroughly inspect the machine for any damage. Repair  
the damage before starting and operating.  
10. Never attempt to make adjustments or repairs to the  
machine while the engine is running.  
11. Grass catcher components and the discharge cover are  
subject to wear and damage which could expose moving  
parts or allow objects to be thrown. For safety protection,  
frequently check components and replace immediately  
with original equipment manufacturer’s (O.E.M.) parts  
only, listed in this manual. “Use of parts which do not  
meet the original equipment specifications may lead to  
improper performance and compromise safety!”  
12. Do not change the engine governor settings or over-  
speed the engine. The governor controls the maximum  
safe operating speed of the engine.  
General Service  
1. Never run an engine indoors or in a poorly ventilated  
area. Engine exhaust contains carbon monoxide, an  
odorless, and deadly gas.  
2. Before cleaning, repairing, or inspecting, make certain  
the blade(s) and all moving parts have stopped.  
Disconnect the spark plug wire and ground against the  
engine to prevent unintended starting.  
13. Maintain or replace safety and instruction labels, as  
necessary.  
14. Observe proper disposal laws and regulations for gas,  
oil, etc. to protect the environment.  
3. Periodically check to make sure the blades come to  
Your Responsibility  
Restrict the use of this accessory and the tractor to persons who read, understand and follow the warnings and  
instructions in this manual and on the machine.  
NOTE: Model 190 Triple Bagger Kit is designed for use on Cub Cadet Fast Attach™ compatible tractors equipped  
with 50-inch cutting deck only.This will NOT mount, nor operate safely or properly on any other tractor regardless of  
the tractor’s compatibility with similar accessories.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: LOOSE PARTS  
The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts, including the  
hardware pack, from the carton before discarding it. Compare with Figure 1 to check that all parts were included.  
Note that the kit and the hardware pack contain extra items which are not used on your unit.  
Grasscatcher Cover  
Assembly  
Support Tube  
(attached to cover)  
Discharge  
Chute  
Assembly  
Mounting  
Bracket  
Grass Bag  
Blades  
Chute Stop  
Bracket  
Carriage Bolt  
Lock Nut  
Figure 1  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 3: ASSEMBLY & OPERATION  
NOTE: References to left, right , front and rear of the  
tractor are from the operator’s position, unless  
otherwise stated.  
Before assembly, place the tractor on a firm, level  
surface, disengage the PTO, stop the tractor  
engine and set the parking brake.  
Support  
Tube  
For convenience, pivot the seat forward and leave it  
in that position until the grass collector is fully  
mounted and assembled.  
Mounting Bracket Assembly  
Remove the hairpin clip and clevis pin from the rear  
of the mounting bracket assembly.  
Position the hooked ends of the bracket assembly  
to the outside of the hitch plate and over the  
shoulder bolts. See Figure 2.  
Mounting  
Bracket  
Hitch Plate  
NOTE: Grasscatcher cover not shown here for clarity  
Mounting  
Bracket  
Figure 3  
Attach the grass bags using the slots shown in  
Figure 4. Close the grasscatcher cover.  
Slots  
Shoulder Bolt  
Figure 2  
Grass  
Bag  
Cover  
Reinsert the clevis pin through the aligned holes  
(Figure 2) in both the bracket assembly and the  
hitch plate and secure with the hairpin clip.  
IMPORTANT: There are two holes in the clevis pin. Be  
sure to insert the hairpin clip in the upper hole to  
properly secure the bracket assembly to the hitch plate.  
Grass Bag  
Figure 4  
Attaching Grasscatcher Cover and Bags  
Place the grasscatcher cover assembly’s support  
tube in position on the rear of unit by sliding the  
support tube down through the center hole in the  
mounting bracket assembly. See Figure 3.  
Attaching Blades  
WARNING: Always protect your hands while  
servicing blades by wearing heavy work gloves  
or using heavy rags.  
NOTE: Two bagging blades are included in the  
grasscatcher kit. These will replace the two outer  
blades from the deck of the tractor while the center  
blade will remain unchanged. Do not try to replace the  
center blade with either bagging blade from the kit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove the cutting deck from beneath the tractor  
(refer to instructions for Deck Removal in your tractor’s  
operator’s manual), then gently flip the deck over to  
expose its underside.  
NOTE: An extra set of carriage bolt and lock nut have  
been supplied in your accessory kit. You may replace  
the old hardware for the chute stop bracket with these  
new ones, or save for later use.  
Place a block of wood between the center deck  
housing baffle and the cutting blade to act as a  
stabilizer. See Figure 5.  
Use a 15/16" wrench to remove the hex flange nut  
that secures the blade to the outer blade spindle  
assembly. See Figure 5.  
Lock Nut  
Remove this  
chute stop  
Carriage Bolt  
A
Hex Flange Nut  
Wood Block  
B
Install this  
chute stop  
Deck  
Chute Deflector  
Figure 6  
NOTE: This chute stop bracket may stay on the unit  
even when the bagger is not being used.  
Spindle Assembly  
Figure 5  
Attaching Discharge Chute  
Raise the deck to its highest position.  
Raise the chute deflector on the deck and hold it  
while you position the discharge chute over the  
chute opening.  
WARNING: The hex flange nut has a right-  
handed thread pattern. Do not attempt to force  
the nut in an incorrect direction; it may damage  
the nut and create a safety hazard.  
Insert the hinge pin of the discharge chute into the  
tube on the chute stop bracket. See Figure 7.  
Rotate the chute around the deck so that its front  
edge fits snugly into the deck opening. Lower the  
chute deflector slowly.  
Place a new blade on top of the outer blade spindle  
so that side of the blade with part number faces the  
ground when the mower is in the operating position.  
Secure with the hex flange nut removed earlier.  
Use a torque wrench to tighten the hex flange nut  
between 70 to 90 foot-pounds.  
Chute Deflector  
Replace blade from the other outer blade spindle  
with the second blade from the bagger kit.  
NOTE: The center blade spindle will continue to use the  
standard cutting blade already attached to the deck.  
Remount the cutting deck following instructions in  
the owner’s manual of the tractor.  
Discharge  
Chute  
Insert hinge  
pin here  
Attaching Chute Stop Bracket  
Hinge Pin  
Figure 7  
Remove the carriage bolt and lock nut holding the  
chute stop to the deck. See Inset A of Figure 6.  
Save the hardware.  
Attach the longer of the three retainer straps on the  
discharge chute to the retainer clip on the deck.  
Refer to Figure 9.  
Insert the curved end of chute tube into the hole in  
the grass bag cover as shown in Figure 8.  
Replace with new chute stop bracket, from the  
bagger kit, at the same position on the deck. See  
Inset B of Figure 6. Secure with the hardware  
removed earlier.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insert the lower end of the chute tube over the  
discharge chute so that its two notches fit into the  
two corresponding notches on the discharge chute.  
See Figure 9.  
Secure by placing the ends of the two short retainer  
straps on the discharge chute over the pins on the  
chute tube. See Figure 9.  
Insert chute tube here  
Operation  
Your triple bagger kit is a valuable accessory to your  
tractor. Optimize its performance by operating  
correctly. Do not try to fit it to tractors other than those  
specified on page 5.  
Figure 8  
Open the grass bag cover by lifting the cover up.  
Do not remove the chute tube assembly from the  
tractor.  
Place short  
strap here  
Place long  
strap here  
Remove the grass bags by lifting up and moving  
the bags away from the support tube assembly.  
To empty the grass clippings at a proper disposal  
sight, use the handle at the bottom of each grass  
bag. Holding the bag firmly, empty the contents.  
Under normal usage, the grass bags are subject  
to wear and tear. Check these bags periodically  
and wash with water if dirty. Allow to air-dry; do  
not apply heat.  
Discharge  
Chute  
Figure 9  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 4: PARTS LIST FOR MODELS 190-190-100 & 190-192-190  
14  
21  
23  
26  
4
12  
22  
20  
7
3
31  
16  
16  
11  
28  
8
16  
33  
30  
17  
18  
16  
19  
25  
27  
16  
B
8
B
C
8
9
See parts  
24  
29  
9
6
2
16  
13  
break-down  
C
below  
15  
5
10  
Components of Cover Assembly pn # 664-04018:  
Components of Bag Assembly:  
50  
35  
45  
49  
47  
A
51  
43  
40  
45  
48  
34  
44  
37  
46  
A
36  
42  
38  
39  
40  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model 190-190-100 & 190-192-190  
Ref.  
No.  
27.  
Part No.  
Description  
Ref.  
No.  
1.  
Part No.  
Description  
742-04067 Blade : High Lift; Cub Cadet  
777D03361 Logo: Cub Cadet  
17200A  
17247  
Catcher Support Bracket  
Tubing Adapter  
28.  
29.  
30.  
31.  
32.  
33.  
34.  
35.  
36.  
37.  
38.  
39.  
40.  
41.  
42.  
43.  
44.  
45.  
46.  
47.  
48.  
49.  
50.  
51.  
2.  
783-0601  
783-0673  
783-0764  
783-0765  
783-1501  
764-0251  
17202A  
710-1652  
720-04018 Screen  
726-04027 Push Nut  
726-0479  
728-0123  
731-04166 Grass Bag Cover  
731-04189 Retainer Seal  
731-0824A Plastic Plate  
735-04020 Grass Bag Seal  
736-0400  
749-0747  
17201A  
Catcher Support Bracket  
Catcher Support Bracket RH  
Catcher Support Bracket LH  
Bracket: Cross Support  
Spacer  
Grassbag  
Screen Mounting Bracket  
TT Screw 1/4-20 x 0.625  
631-0221  
Chute Elbow  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
664-04018 Cover Assembly (includes ref. 35 to 46)  
683-0617 Bracket Assembly: Chute Stop  
689-00002 Grasscatcher Support Assembly  
710-0597  
710-0751  
710-3008  
710-3168  
711-0309A Clevis Pin  
711-04069 Grasscatcher Pin  
712-0130  
712-0431  
712-3004A Flange Lock Nut 5/16-18  
712-3027  
714-0117  
723-04008A Chute Strap  
726-3040  
723-0476  
731-0926B Catcher Tube  
731-2299A Extension Tube  
736-0253  
736-0270  
736-3092  
738-0380  
Hex Bolt 1/4-20 x 1.0  
Hex Bolt 1/4-20 x 0.620  
Hex Bolt 5/16-18 x 0.75  
Carriage Bolt  
Ratchet Clip  
Pop Rivet  
Hex Lock Nut 3/8-16  
Flange Lock Nut 3/8-16  
Flange Lock Nut 1/4-20  
Hairpin Clip  
Flat Washer  
Push Nut  
Chute Strap  
Hinge Bracket  
Bag Hanger Bracket  
Machine Screw  
710-0473  
710-0604A TT Screw 5/16-18 x 0.625  
712-0272 Hex Sems Nut  
749-0745A Tube: Grass Bag Frame  
Beleville Washer  
Bell Washer  
Flat Washer  
Shoulder Screw  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S LIMITED WARRANTY FOR:  
The limited warranty set forth below is given by Cub Cadet  
LLC with respect to new merchandise purchased and used in  
the United States, its possessions and territories.  
possesions and territories, except those sold through  
Cub Cadet’s authorized channels of export  
distribution.  
e.  
f.  
Replacement parts that are not genuine Cub Cadet  
parts.  
Service completed by someone other than an  
authorized service dealer.  
“Cub Cadet” warrants this product against defects in material  
and workmanship for a period of two (2) years commencing  
on the date of original purchase and will, at its option, repair or  
replace, free of charge, any part found to be defective in  
materials or workmanship. This limited warranty shall only  
apply if this product has been operated and maintained in  
accordance with the Operator’s Manual furnished with the  
product, and has not been subject to misuse, abuse,  
commercial use, neglect, accident, improper maintenance,  
alteration, vandalism, theft, fire, water, or damage because of  
other peril or natural disaster. Damage resulting from the  
installation or use of any part, accessory or attachment not  
approved by Cub Cadet for use with the product(s) covered  
by this manual will void your warranty as to any resulting  
damage.  
g.  
Transportation charges and service calls.  
No implied warranty, including any implied warranty of  
merchantability of fitness for a particular purpose,  
applies after the applicable period of express written  
warranty above as to the parts as identified. No other  
express warranty, whether written or oral, except as  
mentioned above, given by any person or entity,  
including a dealer or retailer, with respect to any product,  
shall bind Cub Cadet. During the period of the warranty,  
the exclusive remedy is repair or replacement of the  
product as set forth above.  
Normal wear parts are warranted to be free from defects in  
material and workmanship for a period of thirty (30) days from  
the date of purchase. Normal wear parts include, but are not  
limited to items such as: batteries, belts, blades, blade  
adapters, grass bags, rider deck wheels, seats, snow thrower  
skid shoes, shave plates, auger spiral rubber and tires.  
The provisions as set forth in this warranty provide the  
sole and exclusive remedy arising from the sale. Cub  
Cadet shall not be liable for incidental or consequential  
loss or damage including, without limitation, expenses  
incurred for substitute or replacement lawn care services  
or for rental expenses to temporarily replace a warranted  
product.  
HOW TO OBTAIN SERVICE: Warranty service is available,  
WITH PROOF OF PURCHASE, through your local authorized  
service dealer. To locate the dealer in your area, check your  
Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,  
Cleveland, Ohio 44136-0019, or call 1-877-282-8684, or log  
Some states do not allow the exclusion or limitation of  
incidental or consequential damages, or limitations on how  
long an implied warranty lasts, so the above exclusions or  
limitations may not apply to you.  
In no event shall recovery of any kind be greater than the  
amount of the purchase price of the product sold. Alteration  
of safety features of the product shall void this warranty.  
You assume the risk and liability for loss, damage, or injury to  
you and your property and/or to others and their property  
arising out of the misuse or inability to use the product.  
This limited warranty does not provide coverage in the  
following cases:  
a.  
The engine or component parts thereof. These items  
may carry a separate manufacturer’s warranty. Refer  
to applicable manufacturer’s warranty for terms and  
conditions.  
This limited warranty shall not extend to anyone other than the  
original purchaser or to the person for whom it was purchased  
as a gift.  
b.  
c.  
Log splitter pumps, valves, and cylinders have a sepa  
rate one year warranty.  
Routine maintenance items such as lubricants, filters,  
blade sharpening, tune-ups, brake adjustments, clutch  
adjustments, deck adjustments, and normal  
deterioration of the exterior finish due to use or  
exposure.  
HOW STATE LAW RELATES TO THIS WARRANTY: This  
limited warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state.  
IMPORTANT: Owner must present Original Proof of  
Purchase to obtain warranty coverage.  
d.  
Cub Cadet does not extend any warranty for products  
sold or exported outside of the United States, its  
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-877-282-8684  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Alamo Lawn Mower TX235 User Manual
American Lawn Mower Co Lawn Mower UT13120 User Manual
Craftsman Lawn Mower 24737683 User Guide
Craftsman Lawn Mower 917385192 User Guide
Dixon Lawn Mower 13088 1100A User Guide
Dixon Lawn Mower 17411 1103 User Guide
Land Pride Lawn Mower GS25 Series User Guide
Land Pride Lawn Mower RCB6010 User Guide
Snapper Lawn Mower NHZ14380BVE User Manual
Snapper Lawn Mower R196019B User Manual