INSTALL INSTRUCTIONS KK-S-ST-RP
PERMANENT REAR STEP
2002-2008 SPRINTER VAN
TOOLS REQUIRED:
Ratcheting wrench
Standard socket set
Open-end wrench set
Power drill
Drill bit set
HARDWARE:
QTY DESCRIPTION
PART #
8
½-13 x 1 ½” Hex head bolt
½-13 x 4” Hex head bolt
½” Flat washer
½” Lock washer
½-13 Hex nut
½-13 Nylock nut
¼” x ¾” Lag bolt
GSM33050
GSM33056
GSM31009
GSM31030
GSM30011
GSM30020
GSM33060-1
12
40
8
8
12
4
SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Differentiate all components and hardware in kit.
Channel bracket(s)
(See note below)
(2 per-side) Upper
mounting brackets
Step assembly
Bumper mounting
“L” bracket
Note: Three Channel brackets will come with Rear Step
kit, one short and two long. Use two long brackets for
vehicles with single rear wheels & one short bracket
and one long on vehicles with dual rear wheels.
|