HP Officejet J6400 All-in-One series
User Guide
7. Install the product in a protected
location where no one can step on or
trip over the line cord, and the line
cord cannot be damaged.
Copyright information
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
8. If the product does not operate
normally, see Maintain and
Hewlett-Packard Company
notices
The information contained in this
document is subject to change without
notice.
9. There are no user-serviceable parts
inside. Refer servicing to qualified
service personnel.
All rights reserved. Reproduction,
adaptation, or translation of this
material is prohibited without prior
written permission of Hewlett-
Packard, except as allowed under
copyright laws.
10. Use only the external power
adaptor/battery provided with the
device.
Accessibility
The device provides a number of
features that make it accessible for
people with disabilities.
The only warranties for HP products
and services are set forth in the
express warranty statements
accompanying such products and
services. Nothing herein should be
construed as constituting an
additional warranty. HP shall not be
liable for technical or editorial errors
or omissions contained herein.
Visual
The device software is accessible for
users with visual impairments or low
vision through the use of your
operating system's accessibility
options and features. It also supports
most assistive technology such as
screen readers, Braille readers, and
voice-to-text applications. For users
who are color blind, colored buttons
and tabs used in the software and on
the device control panel have simple
text or icon labels that convey the
appropriate action.
Acknowledgements
Windows and Windows XP are U.S.
registered trademarks of Microsoft
Corporation. Windows Vista is either a
registered trademark or trademark of
Microsoft Corporation in the United
States and/or other countries.
Mobility
For users with mobility impairments,
the device software functions can be
executed through keyboard
commands. The software also
supports Windows accessibility
options such as StickyKeys,
Secure Digital
memory card is supported by the
product. SD Logo is a trademark of its
proprietor.
ToggleKeys, FilterKeys, and
MouseKeys. The device doors,
buttons, paper trays, and paper
guides can be operated by users with
limited strength and reach.
Safety information
Support
Always follow basic safety
precautions when using this product
to reduce risk of injury from fire or
electric shock.
For more details about the
accessibility of this product and HP's
commitment to product accessibility,
visit HP's Web site at www.hp.com/
1. Read and understand all
instructions in the documentation that
comes with the device.
For accessibility information for the
Mac OS, visit the Apple Web site at
2. Use only a grounded electrical
outlet when connecting this product to
a power source. If you do not know
whether the outlet is grounded, check
with a qualified electrician.
3. Observe all warnings and
instructions marked on the product.
4. Unplug this product from wall
outlets before cleaning.
5. Do not install or use this product
near water, or when you are wet.
6. Install the product securely on a
stable surface.
Contents
1
Contents
Send a fax to multiple recipients from the device control panel ..................................53
Send a color original or photo fax .....................................................................................54
Change the fax resolution and Lighter / Darker settings .................................................54
Change the Lighter / Darker setting ..........................................................................56
Send a fax in Error Correction Mode ................................................................................56
Receive faxes to your computer (Fax to PC) ....................................................................63
Change fax settings ................................................................................................................65
3
Embedded Web server .....................................................................................................75
HP Printer Utility (Mac OS) ...............................................................................................76
Understand the self-test diagnostic page ................................................................................77
Set up faxing for the device ....................................................................................................82
Case H: Shared voice/fax line with computer modem ................................................95
Serial-type fax setup .......................................................................................................106
4
Contents
Configure the device (Mac OS) ............................................................................................110
Uninstall and reinstall the software .......................................................................................117
The device prints half a page, then ejects the paper ......................................................138
5
Contents
Additional warranty options .............................................................................................177
Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) ...............188
Notice to users of the U.S. telephone network: FCC requirements .......................................194
7
1 Get started
This guide provides details about how to use the device and to resolve problems.
•
•
•
Find other resources for the product
You can obtain product information and further troubleshooting resources that are not
included in this guide from the following resources:
Resource
Description
Location
Provides illustrated setup
information.
A printed version of the
document is provided with
the device.
Setup poster
Readme file and release notes Provide late-breaking
information and
Included on the Starter CD.
troubleshooting tips.
Toolbox (Microsoft®
Windows®)
Provides information about
print cartridge health and
access to maintenance
services.
The Toolbox is typically
installed with the device
software as an available
installation option.
For more information, see
HP Printer Utility (Mac OS)
Contains tools to configure
print settings, calibrate the
device, clean the print
cartridges, print the
The HP Printer Utility is
typically installed with the
device software.
configuration page, order
supplies online, and find
support information from the
Web site.
For more information, see HP
Device control panel
Provides status, error, and
warning information about
operations.
For more information, see
Logs and reports
Provides information about
events that have occurred.
For more information, see
Self-Test diagnostic page
Device information:
For more information, see
•
Product name
Model number
◦
◦
Get started
9
Chapter 1
(continued)
Resource
Description
Location
Serial number
◦
◦
Firmware version
number
Number of pages printed
from the trays and
accessories
•
•
Ink levels
HP Web sites
Provide the latest printer
software, and product and
support information.
HP telephone support
Lists information to contact
HP. During the warranty
period, this support is often
free of charge.
For more information, see
HP photo and imaging
software help
Provides information about
using the software.
For more information, see
Understand the device parts
This section contains the following topics:
•
•
•
•
•
Front view
10
Get started
Chapter 1
1
2
3
4
5
6
7
Duplexer
Duplexer latch
Ethernet port
Power input
1-Line (fax), 2-EXT (phone)
Rear universal serial bus (USB) port
Document feeder tray
Device control panel buttons and lights
The following diagram and related table provide a quick reference to the device control
panel features.
Label
Name and Description
1
2
Scan To: Presents the Scan To menu for selecting a scan destination.
START SCAN: Starts a scan job and sends it to the destination you selected using the Scan
To button.
3
PRINT PHOTOS: Selects the photo function. Use this button to print photos from a memory
card.
4
5
6
START COPY Black: Starts a black-and-white copy job.
START COPY Color: Starts a color copy job.
Setup: Presents the Setup Menu for generating reports and other maintenance settings, and
accessing the Help menu. The topic that you select from the Help menu opens a help
window on your computer screen.
7
Back: Moves you one level up in the menu.
Left arrow: Decreases values on the display.
OK: Selects a menu or a setting on the display.
Right arrow: Increases values on the display.
Cancel: Stops a job, exits a menu, or exits settings.
Speed Dial: Selects a speed-dial number.
8
9
10
11
12
12
Get started
(continued)
Label
13
Name and Description
START FAX Black: Starts a black-and-white fax job.
START FAX Color: Starts a color fax job.
14
15
One-touch speed-dial buttons: Access the first five speed-dial numbers.
16
Power: Turns the device on or off. The Power button is lit when the device is on. The light
blinks while performing a job.
When the device is turned off, a minimal amount of power is still supplied. To completely
disconnect the power supply, turn the device off, and then unplug the power cord.
17
18
19
Auto answer light: When this is lit, the device automatically answers incoming phone calls.
When off, the device does not answer any incoming fax calls.
Auto Answer: When this button is lit, the device automatically answers incoming phone
calls. When off, the device does not answer any incoming fax calls.
The button name and functionality depends on the country/region in which the device is sold.
Resolution: Adjusts the resolution for the fax you are sending.
Junk Fax Blocker: Presents the Junk Fax Blocker Set Up menu for managing unwanted fax
calls. You are required to subscribe to a caller ID service to use this feature.
20
Redial/Pause: Redial the most recently dialed number, or insert a 3-second pause in a fax
number.
21
22
23
Fax Menu: Presents the Fax menu for selecting fax options.
Keypad: Enters values.
Attention light: When blinking, the attention light indicates an error has occurred that
requires your attention.
24
25
26
27
28
Display: View menus and messages.
Print cartridge indicators: Indicates which print cartridge needs servicing.
Quality: Selects Best, Normal, or Fast quality for copying.
Copy Menu: Presents the Copy menu for selecting options.
Photo Menu: Presents the Photo menu for selecting options.
Connection information
Description
Recommended
Supported software
features
Setup instructions
number of connected
computers for best
performance
One computer
All features are
supported.
Follow the setup poster
guide for detailed
instructions.
USB connection
connected with a USB
cable to the rear USB
2.0 high-speed port on
the device.
Ethernet (wired)
connection
Up to five computers
connected to the device
using a hub or router.
All features are
supported, including
Webscan.
Follow the instructions
in the getting started
Understand the device parts
13
Chapter 1
(continued)
Description
Recommended
Supported software
features
Setup instructions
number of connected
computers for best
performance
guide, and then see
options in this guide for
further instructions.
Up to five computers.
All features resident on
the host computer are
supported. Only print is
supported from the
other computers.
Follow the instructions
Printer sharing
802.11 wireless
The host computer must
be turned on at all
times, or the other
computers cannot print
to the device.
Up to five computers
connected to the device
using a hub or router.
All features are
supported, including
Webscan.
Follow the instructions
Turn off the device
The device has two off modes. The soft off is a mode that draws a very small amount
of electricity and allows for a faster boot-up time than starting from a hard off. The hard
off mode draws no electricity. Both modes only are deactivated using the Power button.
14
Get started
2 Use the device
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
Use device control panel menus
The following sections provide a quick reference to top-level menus that appear on the
control-panel display. To display a menu, press the menu button for the function you
want to use.
•
Scan menu: Presents a list of destinations. Some destinations require the HP
Photosmart Software to be loaded.
•
Copy menu: Menu options include:
◦
◦
◦
Selecting copy quantities
Reducing/enlarging
Selecting media type and size
•
•
Fax menu: Allows you to enter a fax or speed-dial number, or display the Fax
menu. Menu options include:
◦
◦
◦
◦
Modifying resolution
Lightening/darkening
Sending delayed faxes
Setting up new defaults
Photo menu: Menu options include:
◦
◦
◦
◦
◦
Selecting print options
Using special features
Editing
Transferring to a computer
Selecting a proof sheet
Use the device
15
Chapter 2
Device control-panel message types
This section contains the following topics:
•
•
•
•
Status messages
Status messages reflect the current state of the device. They inform you of normal
operation and require no action to clear them. They change as the state of the device
changes. Whenever the device is ready, not busy, and has no pending warning
messages, the status message READY appears if the device is turned on.
Warning messages
Warning messages inform you of events that require your attention, but they do not
prevent the device from operating. An example of a warning message is a low ink
warning. These messages appear until you resolve the condition.
Error messages
Error messages communicate that some action must be performed, such as adding
media or clearing a media jam. These messages are usually accompanied by a
blinking red Attention light. Take the appropriate action to continue printing.
If the error message shows an error code, press the Power button to turn off the
device, and then turn it on again. In most situations, this action solves the problem. If
the message persists, your device might need service. For more information, see
Critical error messages
Critical error messages inform you of a device failure. Some of these messages can
be cleared by pressing the Power button to turn off the device, and then turning it on
again. If a critical error persists, service is required. For more information, see Support
Change device settings
You can change the device settings from these places:
•
•
From the device control panel.
From the HP Solution Center (Windows) or HP Device Manager (Mac OS). For
NOTE: When you are configuring settings in HP Solution Center or in the HP
Device Manager, you cannot see the settings that have been configured from the
device control panel (such as the scan settings).
16
Use the device
To change settings from the device control panel
1. At the device control panel, press the menu button for the function you are using
(for example, Copy Menu).
2. To reach the option that you want to change, use one of the following methods:
•
Press a control-panel button, and then use the left or right arrow keys to adjust
the value.
•
Select the option from the menu on the control-panel display.
3. Select the value that you want, and then press OK.
To change settings from the HP Solution Center (Windows)
To change settings from the HP photo and imaging software (Mac OS)
1. Click the HP Device Manager icon in the Dock.
2. Select the device in the Devices drop-down menu.
3. On the Information and Settings menu, click an item that you want to change.
Use the HP Solution Center (Windows)
On a Windows computer, the HP Solution Center is the entry point for the
HP Photosmart Software. Use the HP Solution Center to change print settings, order
supplies, and access the onscreen Help.
The features available in the HP Solution Center vary depending on the devices you
have installed. The HP Solution Center is customized to show icons that are
associated with the selected device. If the selected device is not equipped with a
particular feature, then the icon for that feature does not appear in the HP Solution
Center.
If the HP Solution Center on your computer does not contain any icons, an error might
have occurred during the software installation. To correct this, use the Control Panel in
Windows to completely uninstall the HP Photosmart Software, and then reinstall the
software. For more information, see the onscreen Help that came with the device.
For information about opening the HP Solution Center, see Use the HP photo and
Use the HP photo and imaging software
You can use the HP photo and imaging software to access many features that are not
available from the device control panel.
The software is installed on your computer during setup. For further information, see
the setup documentation that came with your device.
Access to the HP photo and imaging software differs by operating system (OS). For
example, if you have a Windows computer, the HP photo and imaging software entry
point is the HP Photosmart Software window. If you have a Macintosh computer, the
HP photo and imaging software entry point is the HP Photosmart Studio window.
17
Use the HP photo and imaging software
Chapter 2
Regardless, the entry point serves as the launching pad for the HP photo and imaging
software and services.
To open the HP Photosmart Software on a Windows computer
1. Do one of the following:
•
•
On the Windows desktop, double-click the HP Photosmart Software icon.
In the system tray at the far right of the Windows taskbar, double-click the HP
Digital Imaging Monitor icon.
•
On the taskbar, click Start, point to Programs or All Programs, select HP,
and then click HP Photosmart Software.
2. If you have more than one HP device installed, select the tab with your product's
name.
NOTE: On a Windows computer, the features available in the HP Photosmart
Software vary depending on the devices you have installed. The software is
customized to show icons that are associated with the selected device. If the
selected device is not equipped with a particular feature, then the icon for that
feature does not appear in the software.
TIP: If the HP Photosmart Software on your computer does not contain any
icons, an error might have occurred during the software installation. To correct
this, use the Control Panel in Windows to completely uninstall the
HP Photosmart Software; then reinstall the software. For more information, see
the setup poster that came with your device.
To open the HP Photosmart Studio software on a Macintosh computer
1. Click the HP Photosmart Studio icon in the Dock.
The HP Photosmart Studio window appears.
2. In the HP Photosmart Studio task bar, click Devices.
The HP Device Manager window appears.
3. Select your device from the Device drop-down menu.
From here, you can scan, import documents, and perform maintenance
procedures such as checking the ink levels for the print cartridges.
NOTE: On a Macintosh computer, the features available in the
HP Photosmart Studio software vary depending on the selected device.
TIP: When the HP Photosmart Studio software is opened, you can gain
access to the Dock menu shortcuts by selecting and holding the mouse button
over the HP Photosmart Studio icon in the Dock.
Load originals
You can load an original for a copy or a scan job on the scanner glass or in the
automatic document feeder (ADF). For more information on loading media in the main
18
Use the device
This section contains the following topics:
•
•
Load an original on the scanner glass
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
NOTE: Many of the special features will not work correctly if the glass and lid
To load an original on the scanner glass
1. Lift the scanner lid.
2. Load your original print side down in the right front corner of the glass.
TIP: For more help on loading an original, refer to the engraved guides along
the edge of the glass.
3. Close the lid.
Load an original in the automatic document feeder (ADF)
You can copy, scan, or fax a one-sided or two-sided, single- or multiple-page, A4- or
letter-size document by placing it in the document feeder tray.
CAUTION: Do not load photos in the ADF; this might cause damage to your
photos.
NOTE: Two-sided legal-size documents cannot be scanned, copied, or faxed
using the ADF. Some features, such as the Fit to Page copy feature, do not work
when you load your originals in the ADF. You must load your originals on the glass.
The document feeder tray holds a maximum of 35 sheets of plain paper.
To load an original in the document feeder tray
1. Load your original, with the print side up, into the document feeder tray. Place the
pages so that the top edge of the document goes in first. Slide the media into the
Load originals
19
Chapter 2
automatic document feeder until you hear a beep or see a message on the display
indicating that the loaded pages were detected.
TIP: For more help on loading originals in the automatic document feeder,
refer to the diagram engraved in the document feeder tray.
2. Slide the width guides inward until they stop at the left and right edges of the media.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the device.
Select print media
The device is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
media.
This section contains the following topics:
•
•
•
Tips for selecting and using print media
For the best results, observe the following guidelines.
•
Always use media that conforms to the device specifications. For more
•
•
Load only one type of media at a time into a tray.
Load media print-side down and aligned against the right and back edges of the
20
Use the device
•
•
Do not overload the trays. For more information, see Understand specifications for
To prevent jams, poor print quality, and other printing problems, avoid the following
media:
◦
◦
◦
◦
◦
Multipart forms
Media that is damaged, curled, or wrinkled
Media with cutouts or perforations
Media that is heavily textured, embossed, or does not accept ink well
Media that is too lightweight or stretches easily
Cards and envelopes
•
Avoid envelopes that have a very slick finish, self-stick adhesives, clasps, or
windows. Also avoid cards and envelopes with thick, irregular, or curled edges, or
areas that are wrinkled, torn, or otherwise damaged.
•
•
Use tightly constructed envelopes, and make sure the folds are sharply creased.
Load envelopes with the flaps facing up.
Photo media
•
Use the Best mode to print photographs. Note that in this mode, printing takes
longer and more memory is required from your computer.
•
Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Transparencies
•
Insert transparencies with the rough side down and the adhesive strip pointing
towards the back of the device.
•
Use the Normal mode to print transparencies. This mode provides longer drying
time and ensures that the ink dries completely before the next page is delivered to
the output tray.
•
Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Custom-sized media
•
•
Use only custom-sized media that is supported by the device.
If your application supports custom-sized media, set the media size in the
application before printing the document. If not, set the size in the print driver. You
might need to reformat existing documents to print them correctly on custom-sized
media.
Understand specifications for supported media
weights tables to determine the correct media to use with your device, and determine
what features will work with your media.
•
•
21
Select print media
Chapter 2
Understand supported sizes
Media size
Input tray
Duplexer
ADF
Standard media sizes
U.S. Letter (216 x 279 mm; 8.5 x 11
inches)
U.S. Legal (216 x 356 mm; 8.5 x 14
inches)
A4 (210 x 297 mm; 8.3 x 11.7 inches)
U.S. Executive (184 x 267 mm; 7.25 x
10.5 inches)
B5 (JIS) (182 x 257 mm; 7.17 x 10.12
inches)
B5 (ISO) (176 x 250 mm; 6.9 x 9.8
inches)
B7 (88 x 125mm; 3.5 x 4.9 inches)
A5 (148 x 210 mm; 5.8 x 8.3 inches)
Borderless A4 (210 x 297 mm; 8.3 x
11.7 inches)
Borderless A5 (148 x 210 mm; 5.8 x
8.3 inches)
Borderless B5 (182 x 257 mm; 7.17 x
10.12 inches)
HV (101 x 180 mm; 4.0 x 7.1 inches)
Cabinet size (120 x 165 mm; 4.7 x 6.5
inches)
13 x 18 cm (5 x 7 inches)
Borderless cabinet (120 x 165 mm; 4.7
x 6.5 inches)
Borderless 13 x 18 cm (5 x 7 inches)
Envelopes
U.S. #10 Envelope (105 x 241 mm;
4.12 x 9.5 inches)
DL Envelope (110 x 220 mm; 4.3 x 8.7
inches)
C6 Envelope (114 x 162 mm; 4.5 x 6.4
inches)
Japanese Envelope Chou #3 (120 x
235 mm; 4.7 x 9.3 inches)
22
Use the device
(continued)
Media size
Input tray
Duplexer
ADF
Japanese Envelope Chou #4 (90 x 205
mm; 3.5 x 8.1 inches)
Cards
Index card (76.2 x 127 mm; 3 x 5
inches)
Index card (102 x 152 mm; 4 x 6 inches)
Index card (127 x 203 mm; 5 x 8 inches)
A6 card (105 x 148.5 mm; 4.13 x 5.83
inches)
Borderless A6 card (105 x 148.5 mm;
4.13 x 5.83 inches)
Hagaki** (100 x 148 mm; 3.9 x 5.8
inches)
Ofuku hagaki**
Borderless hagaki (100 x 148 mm; 3.9
x 5.8 inches)**
Photo media
Photo media (102 x 152 mm; 4 x 6
inches)
Photo media (5 x 7 inches)
Photo media (8 x 10 inches)
Photo media (10 x 15 cm)
Photo L (89 x 127 mm; 3.5 x 5 inches)
2L (178 x 127 mm; 7.0 x 5.0 inches)
Borderless photo media (102 x 152
mm; 4 x 6 inches)
Borderless photo media (5 x 7 inches)
Borderless photo media (8 x 10 inches)
Borderless photo media (8.5 x 11
inches)
Borderless photo media (10 x 15 cm)
Borderless Photo L (89 x 127 mm; 3.5
x 5 inches)
Borderless 2L (178 x 127 mm; 7.0 x
5.0 inches)
23
Select print media
Chapter 2
(continued)
Media size
Input tray
Duplexer
ADF
Borderless B5 (182 x 257 mm; 7.2 x
10.1 inches)
Borderless B7 (88 x 125mm; 3.5 x 4.9
inches)
Borderless 4 x 6 tab (102 x 152 mm; 4
x 6 inches)
Borderless 10 x 15 cm tab
Borderless 4 x 8 tab (10 x 20 cm)
Borderless HV (101 x 180 mm; 4.0 x
7.1 inches)
Borderless double A4 (210 x 594 mm;
8.3 x 23.4 inches)
4 x 6 tab (102 x 152 mm; 4 x 6 inches)
10 x 15 cm tab
4 x 8 tab / 10 x 20 cm tab
Other media
Custom-sized media between 76.2 to
216 mm wide and 127 to 610 mm long
(3 to 8.5 inches wide and 5 to 24
inches long)
Custom-sized media (ADF) between
127 to 216 mm wide and 241 to 305
mm long (5 to 8.5 inches wide and 9.5
to 12 inches long)
Panorama (4 x 10 inches, 4 x 11
inches, and 4 x 12 inches)
Borderless panorama (4 x 10 inches, 4
x 11 inches, and 4 x 12 inches)
** The device is compatible with plain and inkjet hagaki from Japan Post only. It is not
compatible with photo hagaki from Japan Post.
Understand supported media types and weights
Tray
Type
Weight
Capacity
60 to 105 g/m2
Input tray
Paper
Up to 250 sheets of
plain paper
(16 to 28 lb bond)
(25 mm or 1 inch
stacked)
Transparencies
Up to 70 sheets
24
Use the device
(continued)
Tray
Type
Weight
Capacity
(17 mm or 0.67 inch
stacked)
Photo media
Labels
280 g/m2
Up to 100 sheets
(17 mm or 0.67 inch
stacked)
(75 lb bond)
Up to 100 sheets
(17 mm or 0.67 inch
stacked)
75 to 90 g/m2
Envelopes
Up to 30 sheets
(17 mm or 0.67 inch
stacked)
(20 to 24 lb bond
envelope)
Up to 200 g/m2
(110 lb index)
Cards
Paper
Up to 80 cards
60 to 105 g/m2
Duplexer
Not applicable
(16 to 28 lb bond)
Output tray All supported media
Up to 150 sheets of
plain paper (text
printing)
60 to 90 g/m2
ADF
Paper
Plain paper: 35 sheets
Legal and special
paper: 20 sheets
(16 to 24 lb bond)
Set minimum margins
The document margins must match (or exceed) these margin settings in portrait
orientation.
Media
(1) Left
margin
(2) Right
margin
(3) Top
margin
(4) Bottom
margin*
U.S. Letter
3.0 mm (0.12 3.0 mm (0.12 3.0 mm (0.12 3.0 mm (0.12
inch)
inch)
inch) - single- inch)
sided printing
25
Select print media
Chapter 2
(continued)
Media
(1) Left
margin
(2) Right
margin
(3) Top
margin
(4) Bottom
margin*
U.S. Legal
A4
14 mm (0.55
inch) - duplex inch) -
printing
14 mm (0.55
duplex
U.S. Executive
U.S. Statement
8.5 x 13 inch
B5
printing
A5
Cards
Custom-sized media
Photo media
Envelopes
3.0 mm (0.12 3.0 mm (0.12 3.0 mm (0.12 14.0 mm
inch) inch) inch) (0.55 inch)
* To achieve this margin setting on a computer running Windows, click the Advanced
tab in the print driver, and select Minimize Margins.
Load media
This section provides instructions for loading media into the device.
To load Tray 1 (main tray)
1. Lift the output tray.
2. Insert the media print-side down along the right of the tray. Make sure the stack of
media aligns with the right and back edges of the tray, and does not exceed the
line marking in the tray.
NOTE: Do not load paper while the device is printing.
26
Use the device
3. Slide the media guide in the tray to adjust it for the media size that you have
loaded, and then lower the output tray.
4. Pull out the extension on the output tray.
Print on special and custom-sized media
To print on special or custom-sized media (Windows)
2. With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
3. Click the Paper/Features tab.
4. Select the media size from the Size is drop-down list.
To set a custom media size:
a. Click the Custom button.
b. Type a name for the new custom size.
c. In the Width and Height boxes, type the dimensions, and then click Save.
d. Click OK twice to close the properties or preferences dialog box. Open the
dialog box again.
e. Select the new custom size.
27
Print on special and custom-sized media
Chapter 2
5. To select the media type:
a. Click More in the Type is drop-down list.
b. Click the desired media type, and then click OK.
6. Select the media source from the Source is drop-down list.
7. Change any other settings, and then click OK.
8. Print your document.
To print on special or custom-sized media (Mac OS)
2. On the File menu, click Page Setup.
3. From the drop-down list, select the HP device.
4. Select the media size.
5. To set a custom media size:
a. Click Manage Custom Sizes in the Paper Size pull-down menu.
b. Click New and type a name for the size in the Paper Size Name box.
c. In the Width and Height boxes, type the dimensions and set the margins, if
desired.
d. Click Done or OK, and then click Save.
6. On the File menu, click Page Setup, and then select the new custom size.
7. Click OK.
8. On the File menu, click Print.
9. Open the Paper Handling panel.
10. Under Destination Paper Size, click the Scale to fit paper size tab, and then
select the customized paper size.
11. Change any other desired settings, and then click OK or Print.
Print borderless
Borderless printing lets you print to the edges of certain media types and a range of
standard media sizes.
NOTE: Open the file in a software application and assign the image size. Make
sure the size corresponds to the media size on which you are printing the image.
In Windows, you can also gain access to this feature from the Printing Shortcuts
tab. Open the printer driver, select the Printing Shortcuts tab, and select the
printing shortcut for this print job drop-down list.
NOTE: Borderless printing is not supported on plain media.
To print a borderless document (Windows)
2. Open the file that you want to print.
3. From the application, open the print driver:
a. Click File, and then click Print.
b. Click Properties or Setup.
28
Use the device
4. Click the Paper/Quality tab.
5. Select the media size from the Size is drop-down list.
6. Select the Borderless Printing check box.
7. Select the media source from the Source is drop-down list.
8. Select the media type from the Type is drop-down list.
NOTE: Borderless printing is not supported on plain media.
9. If you are printing photos, select Best from the Print Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi* for optimum print quality.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10. Change any other print settings, and then click OK.
11. Print the document.
12. If you printed on photo media with a tear-off tab, remove the tab to make the
document completely borderless.
To print a borderless document (Mac OS)
2. Open the file that you want to print.
3. From the drop-down list, select the HP device.
4. Click File, and then click Page Setup.
5. Select the borderless media size, and then click OK.
6. Click File, and then click Print.
7. Open the Paper Type/Quality panel.
8. Click the Paper tab, and then select the media type from the Paper type drop-
down list.
NOTE: Borderless printing is not supported on plain media.
9. If you are printing photos, select Best from the Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi*.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10. Select the media source. If you are printing on thick or photo media, select the
manual feed option.
11. Change any other print settings, and then click Print.
12. If you printed on photo media with a tear-off tab, remove the tab to make the
document completely borderless.
Print borderless
29
Chapter 2
Set up speed-dial entries
You can set up frequently used fax numbers as speed-dial entries. This lets you dial
those numbers quickly by using the device control panel. The first five entries for each
of these destinations are associated with the five speed-dial buttons on the device
control panel.
This section contains the following topics:
•
•
Set up fax numbers as speed-dial entries or groups
You can store fax numbers or groups of fax numbers as speed-dial entries. Speed-dial
entries 1 through 3 are associated with the corresponding three speed-dial buttons on
the device control panel.
For information about printing a list of the speed-dial entries that are set up, see Print
This section contains the following topics:
•
•
Set up speed-dial entries
•
•
•
HP Photosmart Software (Windows): Open the HP Photosmart Software and
follow the instructions in the onscreen Help.
HP Device Manager (Mac OS): Launch HP Device Manager, click Information
and Settings, and then select Fax Speed Dial Settings from the drop-down list.
Device control panel: Press Setup, and then select the Speed Dial Setup option.
◦
To add or change an entry: Select Individual Speed Dial or Group Speed
Dial and press the arrow keys to move to an unused entry number, or type a
number on the keypad. Type the fax number, and then press OK. Include any
pauses or other required numbers, such as an area code, an access code for
numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
Type the name, and then press OK.
◦
To delete one entry or all entries: Select Delete Speed Dial, press the arrow
keys to highlight the speed-dial entry that you want to delete, and then press OK.
Set up a speed-dial group
If you send information to the same group of fax numbers on a regular basis, you can
set up a speed-dial entry for a group in order to simplify the task. The speed-dial entry
for a group can be associated with a speed-dial button on the device control panel.
30
Use the device
A group member must be a member of the speed-dial list before you can add the
member to a speed-dial group. You can add up to 20 fax numbers to each group (with
up to 50 characters for each fax number).
•
•
•
HP Photosmart Software (Windows): Open the HP Photosmart Software and
follow the instructions in the onscreen Help.
HP Device Manager (Mac OS): Launch HP Device Manager, click Information
and Settings, and then select Fax Speed Dial Settings from the drop-down list.
Device control panel: Press the Setup button, and then select the Speed Dial
Setup option.
◦
◦
◦
To add a group: Select Group Speed Dial, select an unassigned speed-dial
entry, and then press OK. Use the arrow keys to highlight a speed-dial entry,
and then press OK to select it. Repeat this step to add additional speed-dial
entries to this group. When finished, select the Done Selecting option, and
then press OK. Use the onscreen keyboard to enter a group speed-dial name,
and then select Done.
To add entries to a group: Select Group Speed Dial, select the group speed-
dial entry that you want to change, and then press OK. Use the arrow keys to
highlight a speed-dial entry, and then press OK to select it (a check mark
appears next to the speed-dial entry). Repeat this step to add additional speed-
dial entries to this group. When finished, select the Done Selecting option,
and then press OK. Select Done at the Group Name screen.
To delete a group: Select Delete Speed Dial, press the arrow keys to highlight
the speed-dial entry that you want to delete, and then press OK.
Print and view a list of speed-dial entries
You can print or view a list of all of the speed-dial entries that have been set up. Each
entry in the list contains the following information:
•
Speed-dial number (the first five entries correspond to the five speed-dial buttons
on the device control panel)
•
•
Name associated with the fax number or group of fax numbers
For the fax speed-dial list, the fax number (or all of the fax numbers for a group)
This section contains the following topics:
•
View a list of speed-dial entries
•
•
•
HP Device Manager (Mac OS): Launch HP Device Manager, click Information
and Settings, and then select Fax Speed Dial Settings from the drop-down list.
HP Photosmart Software (Windows): Open the HP Photosmart Software and
follow the instructions in the onscreen Help.
Control Panel: Press the Setup button, select Speed Dial Setup, and then select
Print Speed Dial List.
Set up speed-dial entries
31
Chapter 2
Install the duplexer
You can print on both sides of a sheet of paper automatically. For information on using
To install the duplexer
1. If you are installing the duplexer for the first time, remove the tape and cardboard
protecting the rear of the device.
2. Slide the duplexer into the device until the unit locks into place. Do not press the
buttons on either side of the duplexer when installing the unit; use them only for
removing the unit from the device.
32
Use the device
3 Print
This section contains the following topics:
•
•
•
Change print settings
You can change print settings (such as paper size or type) from an application or the
printer driver. Changes made from an application take precedence over changes
made from the printer driver. However, after the application is closed, the settings
return to the defaults configured in the driver.
NOTE: To set print settings for all print jobs, make the changes in the printer
driver.
For more information about the features of the Windows printer driver, see the
online help for the driver. For more information about printing from a specific
application, see the documentation that came with the application.
This section contains the following topics:
•
•
•
Change settings from an application for current jobs (Windows)
To change the settings
1. Open the document that you want to print.
2. On the File menu, click Print, and then click Setup, Properties, or Preferences.
(Specific options may vary depending on the application that you are using.)
3. Change the settings that you want, and then click OK, Print, or a similar command.
Change default settings for all future jobs (Windows)
To change the settings
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Right-click the printer icon, and then click Properties, Document Defaults, or
Printing Preferences.
3. Change the settings that you want, and then click OK.
Print
33
Chapter 3
Change settings (Mac OS)
To change the settings
1. On the File menu, click Page Setup.
2. Change the settings that you want (such as paper size), and then click OK.
3. On the File menu, click Print to open the print driver.
4. Change the settings that you want (such as media type), and then click OK or Print.
Print on both sides (duplexing)
You can print on both sides of a sheet of media either manually, or automatically using
the duplexer.
NOTE: The printer driver does not support manual duplexing. Two-sided printing
requires an HP Automatic Two-sided Printing Accessory to be installed on the
device.
This section contains the following topics:
•
•
Guidelines for printing on both sides of a page
•
Always use media that conforms to the device specifications. For more
•
•
Specify two-sided printing options in your application or in the printer driver.
Do not print on both sides of transparencies, envelopes, photo paper, glossy
media, or paper lighter than 16 lb bond (60 g/m2) or heavier than 28 lb bond (105 g/
m2). Jams might occur with these media types.
•
•
Several kinds of media require a specific orientation when you print on both sides
of a page, such as letterhead, preprinted paper, and paper with watermarks and
prepunched holes. When you print from a computer running Windows, the device
prints the first side of the media first. Load the media with the print side facing down.
For auto-duplexing, when printing finishes on one side of the media, the device
holds the media and pauses while the ink dries. Once the ink dries, the media is
pulled back into the device and the second side is printed. When printing is
complete, the media is dropped onto the output tray. Do not grab it before printing
is complete.
•
You can print on both sides of supported custom-sized media by turning the media
over and feeding it into the device again. For more information, see Understand
Perform duplexing
NOTE: You can perform manual duplexing by first printing only the odd pages,
flipping the pages over, and then printing only the even pages.
34
Print
To print automatically on both sides of a page (Windows)
3. With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
4. Click the Features tab.
5. Select the Two-sided printing drop-down list. For auto-duplexing, ensure that
Automatic is selected.
6. To automatically resize each page to match the document's onscreen layout,
ensure Preserve Layout is selected. Clearing this option might result in unwanted
page breaks.
7. Select or clear the Flip Pages Up check box depending on which way you want
the binding. See the graphics in the print driver for examples.
8. Choose a booklet layout from the Booklet Layout drop-down list, if you want.
9. Change any other settings, and then click OK.
10. Print your document.
To print automatically on both sides of a page (Mac OS)
3. On the File menu, click Print.
4. Select Copies and Pages from the drop-down list.
5. Select the option to print on both sides.
6. Select the binding orientation by clicking the appropriate icon.
7. Change any other settings, and then click Print.
Cancel a print job
You can cancel a print job using one of the following methods.
Device control panel: Press (Cancel button). This clears the job that the device is
currently processing. It does not affect jobs waiting to be processed.
Windows: Double-click the printer icon that appears in the lower-right corner of the
computer screen. Select the print job, and then press the Delete key on the keyboard.
Mac OS: Double-click the printer in the Printer Setup Utility. Select the print job, click
Hold, and then click Delete.
35
Cancel a print job
4 Copy
You can produce high-quality color and grayscale copies on a variety of paper types
and sizes.
NOTE: Copying from the HP photo and imaging software is only available on the
Mac OS. See the software's help for more information.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages
stored in memory.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
Make copies from the device control panel
You can make quality copies from the device control panel.
To make a copy from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass. For more information, see
3. Do one of the following:
•
•
Press START COPY Black to start a black-and-white copy job.
Press START COPY Color to start a color copy job.
NOTE: If you have a color original, pressing START COPY Black produces a
black-and-white copy of the color original, while pressing START COPY Color
produces a full-color copy of the color original.
Change the copy settings
You can customize the copy settings to handle nearly any task.
36
Copy
When you change copy settings, the changes are for the current copy job only. You
must set the changes as defaults for the settings to apply to all future copy jobs.
To save the current settings as defaults for future jobs
1. Make any necessary changes to the settings in the Copy Menu.
2. Press Copy Menu, and then press the arrow keys until Set New Defaults appears.
3. Press the arrow keys to select Yes, and then press OK.
Set the number of copies
You can set the number of copies that you want to print by using the Number of
Copies option on the device control panel.
To set the number of copies from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press Copy Menu repeatedly until Number of Copies appears.
4. Press or use the keypad to enter the number of copies, up to the maximum.
TIP: If you hold down either of the arrow buttons, the number of copies
changes by increments of 5 to make it easier to set a large number of copies.
5. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Set the copy paper size
You can set the paper size on the device. The paper size you select should match
what is loaded in your input tray.
To set the paper size from the device control panel
1. In the Copy area, press Copy Menu repeatedly until Copy Paper Size appears.
2. Press until the appropriate paper size appears.
3. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Set the copy paper type
You can set the paper type on the device.
37
Set the copy paper type
Chapter 4
To set the paper type for copies from the device control panel
1. In the Copy area, press Copy Menu repeatedly until Paper Type appears.
2. Press until the appropriate paper type appears.
3. Press START COPY Black or START COPY Color.
Refer to the following table to determine which paper type setting to choose based on
the paper loaded in the input tray.
Paper type
Device control panel setting
Plain Paper
Copier paper or letterhead
HP Bright White Paper
Plain Paper
HP Premium Plus Photo Paper, Glossy
HP Premium Plus Photo Paper, Matte
HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo Paper
Premium Photo
Premium Photo
Premium Photo
HP Premium or Premium Plus Inkjet Transparency Film Transparency
Other transparency film
Plain Hagaki
Inkjet Hagaki
L (Japan only)
2L
Transparency
Plain Paper
Premium inkjet
Premium Photo
Premium photo
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Change copy speed or quality
The device provides three options that affect copy speed and quality:
•
Best (3 stars) produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies slower than the
other quality settings.
•
•
Normal (2 stars) delivers high-quality output and is the recommended setting for
most of your copying. Normal copies faster than Best and is the default setting.
Fast (1 star) copies faster than the Normal setting. The text is comparable to the
quality of the Normal setting, but the graphics might be lower quality. The Fast
setting uses less ink and extends the life of your print cartridges.
To change the copy quality from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the glass.
3. In the Copy area, press Quality until the appropriate quality setting is lit.
4. Press START COPY Black or START COPY Color.
38
Copy
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Resize an original to fit onto letter or A4 paper
If the image or text on your original fills the entire sheet with no margins, use Fit to
Page or Full Page 91% to reduce your original and prevent unwanted cropping of the
text or images at the edges of the sheet.
TIP: You can also use Fit to Page to enlarge a small photo to fit within the
printable area of a full-size page. In order to do this without changing the
proportions of the original or cropping the edges, the device might leave an uneven
amount of white space around the edges of the paper.
To resize a document from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press the Reduce/Enlarge button.
4. Press until Full Page 91% appears.
5. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Copy a legal-size document onto letter paper
You can use the Legal > Ltr 72% setting to reduce a copy of a legal-size document to
a size that fits onto letter paper.
NOTE: The percentage in the example, Legal > Ltr 72%, might not match the
percentage that appears in the display.
39
Copy a legal-size document onto letter paper
Chapter 4
To copy a legal-size document onto letter paper
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press the Reduce / Enlarge button.
4. Press until Legal > Ltr 72% appears.
5. Press START COPY Black or START COPY Color.
Adjust the lightness and darkness of your copy
You can use the Lighter / Darker option to adjust the contrast of the copies you make.
To adjust the copy contrast from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press Copy Menu repeatedly until Lighter / Darker appears.
4. Do one of the following:
•
•
Press to darken the copy.
Press to lighten the copy.
5. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Enhance blurred areas of your copy
You can use the Enhancements feature to adjust the quality of text documents by
sharpening edges of black text or adjust photographs by enhancing light colors that
might otherwise appear white.
The Mixed enhancement is the default option. Use the Mixed enhancement to
sharpen edges of most originals.
40
Copy
To copy a blurred document from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press Copy Menu repeatedly until Enhancements appears.
4. Press until the Text setting appears.
5. Press START COPY Black or START COPY Color.
If any of the following occur, turn off Text enhancement by selecting Photo or None:
•
•
•
•
Stray dots of color surround some text on your copies
Large, black typefaces look splotchy (not smooth)
Thin, colored objects or lines contain black sections
Horizontal grainy or white bands appear in light- to medium-gray areas
Enhance light areas of your copy
You can use Photo enhancements to enhance light colors that might otherwise
appear white. You can also use Photo enhancements to eliminate or reduce any of
the following that might occur when copying with Text enhancements:
•
•
•
•
Stray dots of color surround some text on your copies
Large, black typefaces look splotchy (not smooth)
Thin, colored objects or lines contain black sections
Horizontal grainy or white bands appear in light- to medium-gray areas
To copy an overexposed photo from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press Copy Menu repeatedly until Enhancements appears.
4. Press until the Photo enhancement setting appears.
5. Press START COPY Color.
Cancel a copy job
To stop copying, press Cancel on the device control panel.
41
Cancel a copy job
5 Scan
You can scan originals and send them to a variety of destinations, such as a folder on
the network or a program on a computer. You can use the device control panel, the
HP photo and imaging software, and TWAIN-compliant or WIA-compliant programs on
a computer.
Scan functions are only available after you install the software.
This section contains the following topics:
•
•
•
•
•
•
Scan an original
You can start a scan from a computer or from the device control panel. This section
explains how to scan from the device control panel only.
NOTE: You can also use the HP Photosmart Software to scan an image,
including panorama images. Using this software, you can edit a scanned image
and create special projects using a scanned image. For information about how to
scan from the computer, and how to adjust, resize, rotate, crop, and sharpen your
scans, see the onscreen HP Photosmart Software Help that came with your
software.
To use the scan features, your device and computer must be connected and turned
on. The printer software must also be installed and running on your computer prior to
scanning. To verify that the printer software is running on a computer running
Windows, look for the device icon in the system tray at the lower-right side of the
screen, near the clock. To verify this on a computer using the Mac OS, open the HP
Device Manager, and click Scan Picture. If a scanner is available, it will launch the HP
ScanPro application. If it is not available, a message appears to let you know that a
scanner was not found.
NOTE: Closing the HP Digital Imaging Monitor icon in your Windows system tray
can cause your device to lose some of its scan functionality and result in the No
Connection error message. If this happens, you can restore full functionality by
restarting your computer or by starting the HP Photosmart Software.
This section contains the following topics:
•
•
42
Scan
Scan an original to a program on a computer (direct connection)
Use the following steps if your device is directly connected to a computer via a USB
cable.
When the scan is complete, the program that you have selected opens and displays
the document that you have scanned.
To send a scan to a program on a computer from the HP photo and imaging
software
1. On the computer, open the HP photo and imaging software. For more information,
2. See the onscreen Help for further instructions.
To send a scan to a program on a computer from the device control panel (direct
connect)
2. Press the Scan Menu or Scan To button.
3. Press the arrow keys to select the program that you want to use (such as the HP
photo and imaging software), and then press OK.
4. Press START SCAN.
Scan an original to a memory device
You can send the scanned image as a JPEG image to the memory card that is
currently inserted.
To scan to a memory device
1. Load your original print-side down in the right-front corner of the glass or in the ADF.
2. Insert the memory device.
3. Press Scan To.
4. Press the arrow keys to highlight Memory Device, and then press OK.
The device scans the image and saves the file to the memory card.
Use Webscan via embedded Web server
Webscan is a feature of the embedded Web server that lets you scan photos and
documents from your device to your computer using a Web browser. This feature is
available even if you did not install the device software on your computer.
▲ Click the Information tab, click Webscan in the left pane, make selections for
Image Type and Document Size, and then click Scan or Preview.
Scan from a TWAIN-compliant or a WIA-compliant program
The device is TWAIN-complaint and WIA-compliant and works with programs that
support TWAIN-compliant and WIA-compliant scanning devices. While you are in a
43
Scan from a TWAIN-compliant or a WIA-compliant program
Chapter 5
TWAIN-compliant or WIA-compliant program, you can gain access to the scanning
feature and scan an image directly into the program.
TWAIN is supported in all Windows and Mac OS operating systems.
In Windows operating systems, WIA is supported only for Windows XP and Vista
direct connections. WIA is not supported for the Mac OS.
This section contains the following topics:
•
•
Scan from a TWAIN-compliant program
Generally, a software program is TWAIN-compliant if it has a command such as
Acquire, File Acquire, Scan, Import New Object, Insert from, or Scanner. If you
are unsure whether the program is compliant or you do not know what the command is
called, see the software program Help or documentation.
Start the scan from within the TWAIN-compliant program. See the software program
Help or documentation for information about the commands and steps to use.
Scan from a WIA-compliant program
Generally, a software program is WIA-compliant if it has a command such as Picture/
From Scanner or Camera in the Insert or File menu. If you are unsure whether the
program is compliant or you do not know what the command is called, see the
software program Help or documentation.
Start the scan from within the WIA-compliant program. See the software program Help
or documentation for information about the commands and steps to use.
Edit a scanned original
You can edit a scanned image using the HP Photosmart Software. You can also edit a
scanned document by using your Optical Character Recognition (OCR) software.
This section contains the following topics:
•
•
Edit a scanned photo or graphic
You can edit a scanned photo or graphic using the HP Photosmart Software. Use this
software to adjust the brightness, contrast, color saturation, and more. You can also
rotate the image using the HP Photosmart Software.
For more information, see the onscreen HP Photosmart Software Help.
Edit a scanned document using optical character recognition (OCR) software
You can use OCR software to import scanned text into your preferred word-processing
program for editing. This allows you to edit letters, newspaper clippings, and many
other documents.
44
Scan
You can specify the word-processing program that you want to use for editing. If the
word-processing icon is not present or active, either you do not have word-processing
software installed on your computer, or the scanner software did not recognize the
program during the installation. See the onscreen Help for the HP photo and imaging
software for information about how to create a link to the word-processing program.
The OCR software does not support scanning colored text. Colored text is always
converted to black-and-white text before being sent to OCR. Thus, all text in the final
document is in black and white, regardless of the original color.
Because of the complexity of some word-processing programs and their interaction
with the device, it is sometimes preferable to scan to Wordpad (a Windows
accessory), and then cut and paste the text into the preferred word-processing
program.
Change scan settings
To change scan settings
•
HP Device Manager (Mac OS): Launch HP Device Manager, click Information
and Settings, and then select Scan Preferences from the drop-down list.
•
Windows: Open the device software, select Settings, select Scan Settings and
Preferences, then select from the available options and make your selections.
Cancel a scan job
To cancel a scan job, press Cancel on the device control panel.
45
Cancel a scan job
6 Work with memory devices
The device comes with a memory card reader that can read several types of digital
camera memory cards. You can print an index sheet, which shows thumbnail views of
photos that are stored on a memory card.
This section contains the following topics:
•
•
•
•
•
Insert a memory card
If your digital camera uses a memory card to store photos, you can insert the memory
card into the device to print or save your photos.
CAUTION: Attempting to remove a memory card while it is being accessed can
damage files on the card. You can safely remove a card only when the photo light
is not blinking. Also, never insert more than one memory card at a time as this can
also damage files on the memory cards.
The device supports the memory cards described below. Each type of memory card
can only be inserted in the appropriate slot for that card.
1
2
xD
Memory Stick, MagicGate Memory Stick, Memory Stick Duo, and Memory Stick Pro,
Memory Stick Micro (requires adapter that must be purchased separately)
3
Secure Digital, High Capacity Secure Digital (HCSD), MultimediaCard (MMC), Secure
MMC.
Reduced-Size MultiMediaCard RS - MMC/MMCmobile, MMCmicro, miniSD, microSD (all
require adapters that must be purchased separately)
4
CompactFlash (Type I and II)
46
Work with memory devices
To insert a memory card
1. Turn the memory card so that the label faces up, and the contacts are facing the
device.
2. Insert the memory card into the corresponding memory card slot.
Print DPOF photos
Camera-selected photos are photos you marked for printing with your digital camera.
Depending on your camera, the camera might identify page layout, number of copies,
rotation, and other print settings.
The device supports the Digital Print Order Format (DPOF) file format 1.1, so you do
not have to reselect the photos to print.
When you print camera-selected photos, the device print settings do not apply; the
DPOF settings for page layout and number of copies override those of the device.
NOTE: Not all digital cameras enable you to tag your photos for printing. See the
documentation that came with your digital camera to see if your camera supports
DPOF file format 1.1.
To print camera-selected photos using the DPOF standard
1. Insert your memory card into the appropriate slot on the device.
2. When prompted, do one of the following:
•
Press OK to print all DPOF-tagged photos.
The device prints all DPOF-tagged photos.
Press the arrow keys to highlight No, and then press OK.
This bypasses DPOF printing.
•
View photos
You can view photos using the HP Photosmart Software.
This section contains the following topics:
•
47
View photos
Chapter 6
View photos using your computer
You can view and edit photos using the HP Photosmart Software that came with your
device.
For more information, see the onscreen HP Photosmart Software Help.
Print an index sheet from the device control panel
NOTE: From the device, you can only access JPEG and TIFF image files. To
print other types of files, transfer the files from your memory card to your computer
and use the HP Photosmart Software.
To print an index sheet
1. Insert a memory card into the appropriate slot on the device.
2. Press the Photo Menu button.
3. Press the right arrow key repeatedly to select Index Sheet.
4. Press OK.
Save photos to your computer
After you take photos with your digital camera, you can print them immediately or save
them to your computer. To save the photos to your computer, remove the memory
card from your digital camera and insert it in the appropriate memory card slot on the
device.
To save photos
NOTE: Use these instructions only when you are using a network connection. If
you are using a USB connection, then a dialog box will automatically appear on the
computer when you insert the memory card in the device.
1. Insert a memory card into the appropriate slot on the device.
2. Press Photo Menu.
3. Press the arrow keys and select Photo Transfer, and then press OK.
4. Press the arrow keys and select Yes.
5. Press the arrow keys and select Transfer to computer, and then select the name
of your computer.
6. Follow the onscreen prompts on your computer to save the photos to your
computer.
48
Work with memory devices
7
Fax
You can use the device to send and receive faxes, including color faxes. You can
schedule faxes to be sent at a later time and set up speed-dials to send faxes quickly
and easily to frequently used numbers. From the device control panel, you can also
set a number of fax options, such as resolution and the contrast between lightness
and darkness on the faxes you send.
If the device is directly connected to a computer, you can use the HP photo and
imaging software to perform fax procedures that are not available from the device
NOTE: Before you begin faxing, make sure you have set up the device properly
for faxing. You might have already done this as part of the initial setup, by using
either the device control panel or the software that came with the device. You can
verify the fax is set up correctly by running the fax setup test from the device
control panel. To run the fax test, press Setup, select Tools, select Run fax test,
and then press OK.
This section contains the following topics:
•
•
•
•
•
•
•
Send a fax
You can send a fax in a variety of ways. Using the device control panel, you can send
a black-and-white or color fax. You can also send a fax manually from an attached
phone. This allows you to speak with the recipient before sending the fax.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
49
Fax
Chapter 7
Send a basic fax
You can easily send a single- or multiple-page black-and-white fax by using the device
control panel.
NOTE: If you need printed confirmation that your faxes were successfully sent,
enable fax confirmation before sending any faxes.
TIP: You can also send a fax manually from a phone or by using monitor dialing.
These features allow you to control the pace of your dialing. They are also useful
when you want to use a calling card to charge the call and you have to respond to
tone prompts while dialing.
To send a basic fax from the device control panel
2. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
TIP: To add a pause in the fax number you are entering, press Redial/Pause,
or press the Symbols (*) button repeatedly, until a dash (-) appears on the
display.
3. Press START FAX Black.
If the device detects an original loaded in the automatic document feeder, it
sends the document to the number you entered.
TIP: If the recipient reports issues with the quality of the fax you sent, you can
try changing the resolution or contrast of your fax.
Send a fax manually from a phone
Sending a fax manually allows you to make a phone call and talk with the recipient
before you send the fax. This is useful if you want to inform the recipient that you are
going to send them a fax before sending it. When you send a fax manually, you can
hear the dial tones, telephone prompts, or other sounds through the handset on your
telephone. This makes it easy for you to use a calling card to send your fax.
Depending on how the recipient has their fax machine set up, the recipient might
answer the phone, or the fax machine might take the call. If a person answers the
phone, you can speak with the recipient before sending the fax. If a fax machine
answers the call, you can send the fax directly to the fax machine when you hear the
fax tones from the receiving fax machine.
To send a fax manually from a phone
2. Dial the number by using the keypad on the phone that is connected to the device.
NOTE: Do not use the keypad on the device control panel when manually
sending a fax. You must use the keypad on your phone to dial the recipient's
number.
50
Fax
3. If the recipient answers the telephone, you can engage in a conversation before
sending your fax.
NOTE: If a fax machine answers the call, you will hear fax tones from the
receiving fax machine. Proceed to the next step to transmit the fax.
4. When you are ready to send the fax, press START FAX Black or START FAX
Color.
NOTE: If prompted, select Send Fax, and then press START FAX Black or
START FAX Color again.
If you were speaking with the recipient before sending the fax, inform the recipient
that they should press Start on their fax machine after they hear fax tones.
The telephone line is silent while the fax is transmitting. At this point, you can hang
up the telephone. If you want to continue speaking with the recipient, remain on
the line until the fax transmission is complete.
Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the device control panel as you would
dial a regular telephone. When you send a fax using monitor dialing, you can hear the
dial tones, telephone prompts, or other sounds through the speakers on the device.
This enables you to respond to prompts while dialing, as well as control the pace of
your dialing.
TIP: If you do not enter your calling card PIN fast enough, the device might start
sending fax tones too soon and cause your PIN not to be recognized by the calling
card service. If this is the case, you can create a speed dial entry to store the PIN
for your calling card.
NOTE: Make sure the volume is turned on, or you will not hear a dial tone.
To send a fax using monitor dialing from the device control panel
2. Press START FAX Black or START FAX Color.
If the device detects an original loaded in the automatic document feeder, you will
hear a dial tone.
3. When you hear the dial tone, enter the number by using the keypad on the device
control panel.
4. Follow any prompts that might occur.
TIP: If you are using a calling card to send a fax and you have your calling
card PIN stored as a speed dial, when prompted to enter your PIN, press
Speed Dial or a one-touch speed dial button to select the speed dial entry
where you have your PIN stored.
Your fax is sent when the receiving fax machine answers.
51
Send a fax
Chapter 7
Send a fax from memory
You can scan a black-and-white fax into memory and then send the fax from memory.
This feature is useful if the fax number you are trying to reach is busy or temporarily
unavailable. The device scans the originals into memory and sends them once it is
able to connect to the receiving fax machine. After the device scans the pages into
memory, you can immediately remove the originals from the document feeder tray.
NOTE: You can only send a black-and-white fax from memory.
To send a fax from memory
2. In the Fax area, press Fax Menu.
The Enter Number prompt appears.
3. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
4. In the Fax area, press Fax Menu repeatedly until How to Fax appears.
5. Press until Scan & Fax appears, and then press OK.
6. Press START FAX Black.
The device scans the originals into memory and sends the fax when the receiving
fax machine is available.
Schedule a fax to send later
You can schedule a black-and-white fax to be sent within the next 24 hours. This
enables you to send a black-and-white fax late in the evening, when phone lines are
not as busy or phone rates are lower, for example. The device automatically sends
your fax at the specified time.
You can only schedule one fax to be sent at a time. You can continue to send faxes
normally, however, while a fax is scheduled.
NOTE: You can only send faxes in black and white due to memory limitations.
To schedule a fax from the device control panel
2. In the Fax area, press Fax Menu repeatedly until How to Fax appears.
3. Press until Send Fax Later appears, and then press OK.
4. Enter the send time by using the numeric keypad, and then press OK. If prompted,
press 1 for AM, or 2 for PM.
5. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
6. Press START FAX Black.
The device scans all pages and the scheduled time appears on the display. The
fax is sent at the scheduled time.
52
Fax
To cancel a scheduled fax
1. In the Fax area, press Fax Menu repeatedly until How to Fax appears.
2. Press until Send Fax Later appears, and then press OK.
If there is a fax already scheduled, the Cancel prompt appears on the display.
3. Press 1 to select Yes.
NOTE: You can also cancel the scheduled fax by pressing Cancel on the
device control panel when the scheduled time is visible on the display.
Send a fax to multiple recipients
This section contains the following topics:
•
•
Send a fax to multiple recipients from the device control panel
You can send a fax to multiple recipients at once by grouping individual speed dial
entries into group speed dial entries.
To send a fax to multiple recipients using group speed dial
2. Press Speed Dial repeatedly, until the appropriate group speed dial entry appears.
TIP: You can also scroll through the speed dial entries by pressing or , or
you can select a speed dial entry by entering its speed dial code using the
keypad on the device control panel.
3. Press START FAX Black.
If the device detects an original loaded in the automatic document feeder, it sends
the document to each number in the group speed dial entry.
NOTE: You can only use group speed dial entries to send faxes in black and
white, because of memory limitations. The device scans the fax into memory
then dials the first number. When a connection is made, it sends the fax and
dials the next number. If a number is busy or not answering, the device follows
the settings for Busy Redial and No Answer Redial. If a connection cannot be
made, the next number is dialed and an error report is generated.
Send a fax to multiple recipients from the HP Photosmart Studio Software (Mac
OS)
To send a fax to multiple recipients from the software
2. Select the HP Device Manager from the Dock.
The HP Device Manager window appears.
53
Send a fax
Chapter 7
3. In the Devices pop-up menu, choose the HP All-in-One, and then double-click
Send Fax.
The Print dialog box opens.
4. From the Printer pop-up menu, choose the HP All-in-One (Fax).
5. From the pop-up menu, choose Fax Recipients.
6. Enter the recipient information, and then click Add to Recipients.
NOTE: You can also add recipients from the Phone Book or from the
Address Book. To select a recipient from the Address Book, click Open
Address Book, and then drag and drop the recipient to the Fax Recipients
area.
7. Continue to enter recipients, clicking Add to Recipients after each one, until all
the appropriate recipients are in the Recipient List.
8. Click Send Fax Now.
Send a color original or photo fax
You can fax a color original or photo from the device. If it determines that the
recipient's fax machine only supports black-and-white faxes, the fax is sent in black
and white.
HP recommends that you use only color originals for color faxing.
To send a color original or photo fax from the device control panel
2. In the Fax area, press Fax Menu.
The Enter Number prompt appears.
3. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
4. Press START FAX Color.
If the device detects an original loaded in the automatic document feeder, it sends
the document to the number you entered.
NOTE: If the recipient's fax machine only supports black-and-white faxes, the
HP All-in-One automatically sends the fax in black and white. A message
appears after the fax has been sent indicating that the fax was sent in black
and white. Press OK to clear the message.
Change the fax resolution and Lighter / Darker settings
You can change the Resolution and Lighter / Darker settings for documents that you
are faxing.
NOTE: These settings do not affect copy settings. Copy resolution and lightness/
darkness are set independently from fax resolution and lightness/darkness. Also,
the settings that you change from the device control panel do not affect faxes you
send from your computer.
54
Fax
This section contains the following topics:
•
•
•
Change the fax resolution
The Resolution setting affects the transmission speed and quality of faxed black-and-
white documents. If the receiving fax machine does not support the resolution you
have chosen, the HP All-in-One sends faxes at the highest resolution supported by the
receiving fax machine.
NOTE: You can only change the resolution for faxes that you are sending in black
and white. The device sends all color faxes using Fine resolution.
The following resolution settings are available for sending faxes: Fine, Very Fine,
Photo, and Standard.
•
Fine: provides high-quality text suitable for faxing most documents. This is the
default setting. When sending faxes in color, the device always uses the Fine
setting.
•
Very Fine: provides the best quality fax when you are faxing documents with very
fine detail. If you choose Very Fine, be aware that the faxing process takes longer
to complete and you can only send black-and-white faxes using this resolution. If
you send a color fax, it will be sent using Fine resolution instead.
•
•
Photo: provides the best quality fax when sending photographs in black and white.
If you choose Photo, be aware that the faxing process takes longer to complete.
When faxing photographs in black and white, HP recommends that you choose
Photo.
Standard: provides the fastest possible fax transmission with the lowest quality.
When you exit the Fax menu, this option returns to the default setting unless you set
your changes as the default.
To change the resolution from the device control panel
2. In the Fax area, press Fax Menu.
The Enter Number prompt appears.
3. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
4. In the Fax area, press Fax Menu repeatedly until Resolution appears.
5. Press to select a resolution setting, and then press OK.
6. Press START FAX Black.
If the device detects an original loaded in the automatic document feeder, it sends
the document to the number you entered.
55
Send a fax
Chapter 7
Change the Lighter / Darker setting
You can change the contrast of a fax to be darker or lighter than the original. This
feature is useful if you are faxing a document that is faded, washed out, or
handwritten. You can darken the original by adjusting the contrast.
NOTE: The Lighter / Darker setting applies to black-and-white faxes only, not
color faxes.
When you exit the Fax menu, this option returns to the default setting unless you set
your changes as the default.
To change the Lighter / Darker setting from the device control panel
2. In the Fax area, press Fax Menu.
The Enter Number prompt appears.
3. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed
dial button to select a speed dial, or press Redial/Pause to redial the last number
dialed.
4. In the Fax area, press Fax Menu repeatedly until Lighter / Darker appears.
5. Press to lighten the fax or press to darken it, and then press OK.
The indicator moves to the left or right as you press an arrow button.
6. Press START FAX Black.
If the device detects an original loaded in the automatic document feeder, it sends
the document to the number you entered.
Set new default settings
You can change the default value for the Resolution and Lighter / Darker settings
through the device control panel.
To set new default settings from the device control panel
1. Make changes to the Resolution and Lighter / Darker settings.
2. In the Fax area, press Fax Menu repeatedly until Set New Defaults appears.
3. Press until Yes appears, and then press OK.
Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by
detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or might even
be reduced, on good phone lines. On poor phone lines, ECM increases sending time
and phone charges, but sends the data much more reliably. The default setting is On.
Turn ECM off only if it increases phone charges substantially, and you can accept
poorer quality in exchange for reduced charges.
Before turning the ECM setting off, consider the following. If you turn ECM off
•
•
•
The quality and transmission speed of faxes you send and receive are affected.
The Fax Speed is automatically set to Medium.
You will no longer be able to send or receive faxes in color.
56
Fax
To change the ECM setting from the device control panel
1. Press Setup.
2. Press 5, and then press 6.
This selects Advanced Fax Setup and then selects Error Correction Mode.
3. Press to select On or Off.
4. Press OK.
Receive a fax
You can receive faxes automatically or manually. If you turn off the Auto Answer
option, you must receive faxes manually. If you turn on the Auto Answer option (the
default setting), the device automatically answers incoming calls and receives faxes
after the number of rings that are specified by the Rings to Answer setting. (The
default Rings to Answer setting is five rings.)
If you receive a legal-size fax and the device is not currently set to use legal-size
paper, the device reduces the fax so that it fits on the paper that is loaded. If you have
disabled the Automatic Reduction feature, the device prints the fax on two pages.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages
stored in memory.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
Receive a fax manually
When you are on the phone, the person you are speaking with can send you a fax
while you are still connected. This is referred to as manual faxing. Use the instructions
in this section to receive a manual fax.
NOTE: You can pick up the handset to talk or listen for fax tones.
You can receive faxes manually from a phone that is:
•
•
Directly connected to the device (on the 2-EXT port)
On the same phone line, but not directly connected to the device
57
Receive a fax
Chapter 7
To receive a fax manually
1. Make sure the device is turned on and you have paper loaded in the input tray.
2. Remove any originals from the document feeder tray.
NOTE: The automatic document feeder must be empty to receive a fax. If
there are documents in the document feeder, then receiving the fax will be
unsuccessful.
3. Set the Rings to Answer setting to a high number to allow you to answer the
incoming call before the device answers. Or, turn off the Auto Answer setting so
that the device does not automatically answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start
on their fax machine.
5. When you hear fax tones from a sending fax machine, do the following:
a. Press START FAX Black or START FAX Color on the device control panel.
b. When prompted, select Fax Receive.
c. After the device begins to receive the fax, you can hang up the phone or
remain on the line. The phone line is silent during fax transmission.
Set up backup fax reception
Depending on your preference and security requirements, you can set up the device to
store all the faxes it receives, only the faxes it receives while the device is in an error
condition, or none of the faxes it receives.
The following Backup Fax Reception modes are available:
On
The default setting. When Backup Fax Reception is On, the device
stores all received faxes in memory. This enables you to reprint up to
eight of the most recently printed faxes if they are still saved in memory.
NOTE: When device memory is low, it overwrites the oldest, printed
faxes as it receives new faxes. If the memory becomes full of unprinted
faxes, the device stops answering incoming fax calls.
NOTE: If you receive a fax that is too large, such as a very detailed
color photo, it might not be stored in memory due to memory limitations.
On Error Only
Causes the device to store faxes in memory only if an error condition
exists that prevents the device from printing the faxes (for example, if the
device runs out of paper). The device continues to store incoming faxes
as long as there is memory available. (If the memory becomes full, the
device stops answering incoming fax calls.) When the error condition is
resolved, the faxes stored in memory print automatically, and then they
are deleted from memory.
Off
Faxes are never stored in memory. For example, you might want to turn
off Backup Fax Reception for security purposes. If an error condition
occurs that prevents the device from printing (for example, the device
runs out of paper), the device stops answering incoming fax calls.
58
Fax
NOTE: If Backup Fax Reception is enabled and you turn off the device, all faxes
stored in memory are deleted, including any unprinted faxes that you might have
received while the device was in an error condition. You must contact the senders
to ask them to resend any unprinted faxes. For a list of the faxes you have
received, print the Fax Log. The Fax Log is not deleted when the device is turned
off.
NOTE: If you turn on Fax to PC, set Backup Fax Reception to On. If you set
Backup Fax Reception to On Error Only or Off, then the backup fax reception will
attempt to save color faxes.
To set backup fax reception from the device control panel
1. Press Setup.
2. Select Advance Fax Setup, and then select Backup Fax Reception.
3. Press the right arrow button to select On, On Error Only, or Off.
4. Press OK.
Reprint received faxes from memory
If you set the Backup Fax Reception mode to On, the received faxes are stored in
memory, whether the device has an error condition or not.
NOTE: After the memory becomes full, the oldest, printed faxes are overwritten
as new faxes are received. If all the stored faxes are unprinted, the device does
not receive any fax calls until you print or delete the faxes from memory. You might
also want to delete the faxes in memory for security or privacy purposes.
Depending on the sizes of the faxes in memory, you can reprint up to eight of the most
recently printed faxes, if they are still in memory. For example, you might need to
reprint your faxes if you lost the copy of your last printout.
To reprint faxes in memory from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Press Setup.
3. Select Tools, and then select Reprint Faxes in Memory.
The faxes are printed in the reverse order from which they were received with the
most recently received fax printed first, and so on.
4. If you want to stop reprinting the faxes in memory, press Cancel.
To delete all the faxes in memory from the device control panel
▲ Turn off the device by pressing the Power button.
All faxes stored in memory are deleted from memory when you turn off the power.
Poll to receive a fax
Polling allows the HP All-in-One to ask another fax machine to send a fax that it has in
its queue. When you use the Poll to Receive feature, the HP All-in-One calls the
designated fax machine and requests the fax from it. The designated fax machine
must be set for polling and have a fax ready to send.
59
Receive a fax
Chapter 7
NOTE: The HP All-in-One does not support polling pass codes. Polling pass
codes are a security feature that require the receiving fax machine to provide a
pass code to the device it is polling in order to receive the fax. Make sure the
device you are polling does not have a pass code set up (or has not changed the
default pass code) or the HP All-in-One will not be able to receive the fax.
To set up poll to receive a fax from the device control panel
1. In the Fax area, press Fax Menu repeatedly until How to Fax appears.
2. Press until Poll to Receive appears, and then press OK.
3. Enter the fax number of the other fax machine.
4. Press START FAX Black or START FAX Color.
NOTE: If you press START FAX Color but the sender sent the fax in black
and white, the device prints the fax in black and white.
Forward faxes to another number
You can set up the device to forward your faxes to another fax number. A received
color fax is forwarded in black and white.
HP recommends that you verify the number you are forwarding to is a working fax line.
Send a test fax to make sure the fax machine is able to receive your forwarded faxes.
To forward faxes from the device control panel
1. Press Setup.
2. Select Advance Fax Setup, and then select Fax Forwarding Black Only.
3. Press the right arrow button until On-Forward or On-Print & Forward appears,
and then press OK.
•
Choose On-Forward if you want to forward the fax to another number without
printing a backup copy on the device.
NOTE: If the device is not able to forward the fax to the designated fax
machine (for example, if it is not turned on), the device prints the fax. If you
set up the device to print error reports for received faxes, it will also print an
error report.
•
Choose On-Print & Forward to print a backup copy of your received fax while
forwarding the fax to another number.
4. At the prompt, enter the number of the fax machine that will receive the forwarded
faxes.
60
Fax
5. At the prompt, enter a start time and date and a stop time and date.
6. Press OK.
Fax Forwarding appears on the control-panel display.
If the device loses power when Fax Forwarding is set up, it saves the Fax
Forwarding setting and phone number. When power is restored to the device, the
Fax Forwarding setting is still On.
NOTE: You can cancel fax forwarding by pressing Cancel on the device
control panel when the Fax Forwarding message is visible on the display, or
you can select Off from the Fax Forwarding Black Only menu.
Set the paper size for received faxes
You can select the paper size for received faxes. The paper size you select should
match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal
paper only.
NOTE: If an incorrect paper size is loaded in the input tray when you receive a
fax, the fax does not print and an error message appears on the display. Load
letter, A4, or legal paper, and then press OK to print the fax.
To set the paper size for received faxes from the device control panel
1. Press Setup.
2. Select Basic Fax Setup and then select Fax Paper Size.
3. Press to select an option, and then press OK.
Set automatic reduction for incoming faxes
The Automatic Reduction setting determines what the HP All-in-One does if it
receives a fax that is too large for the default paper size. This setting is turned on by
default, so the image of the incoming fax is reduced to fit on one page, if possible. If
this feature is turned off, information that does not fit on the first page is printed on a
second page. Automatic Reduction is useful when you receive a legal-size fax and
letter-size paper is loaded in the input tray.
To set automatic reduction from the device control panel
1. Press Setup.
2. Select Advanced Fax Setup and then select Automatic Reduction.
3. Press to select Off or On.
4. Press OK.
Block junk fax numbers
If you subscribe to a caller ID service through your phone provider, you can block
specific fax numbers so the device does not print faxes received from those numbers.
When an incoming fax call is received, the device compares the number to the list of
junk fax numbers to determine if the call should be blocked. If the number matches a
number in the blocked fax numbers list, the fax is not printed. (The maximum number
of fax numbers you can block varies by model.)
61
Receive a fax
Chapter 7
NOTE: This feature is not supported in all countries/regions. If it is not supported
in your country/region, Junk Fax Blocker Set Up does not appear in the Basic
Fax Setup menu.
NOTE: If no phone numbers are added in the Caller ID list, it is assumed that the
user has not signed up for the Caller ID service with the phone company.
This section contains the following topics:
•
•
•
Set the junk fax mode
By default, Block Junk Fax mode is turned On. If you do not subscribe to a caller ID
service through your phone provider, or do not want to use this feature, you can turn
off this setting.
To set the junk fax mode
▲ Press the Junk Fax Blocker button, select the Block Junk Fax option, and then
select On or Off.
Add numbers to the junk fax list
There are two ways to add a number to your junk list. You can select numbers from
your caller ID history, or you can enter new numbers. The numbers in your junk list are
blocked if Block Junk Fax mode is set to On.
To select a number from the caller ID list
1. Press Setup.
2. Press Basic Fax Setup, and then press Junk Fax Blocker Setup.
3. Press Add number to Junk List, and then press Select Number.
4. Press the right arrow button to scroll through the numbers from which you have
received faxes. When the number you want to block appears, press OK to select it.
5. When the Select Another? prompt appears, do one of the following:
•
If you want to add another number to the list of junk fax numbers, press
Yes, and then repeat step 4 for each number you want to block.
•
If you are done, press No.
To manually enter a number to block
1. Press Setup.
2. Press Basic Fax Setup, and then press Junk Fax Blocker Setup.
3. Press Add number to Junk List, and then press Enter Number.
62
Fax
4. Use the keypad to enter a fax number to block, and then press OK.
Make sure you enter the fax number as it appears on the control-panel display,
and not the fax number that appears on the fax header of the received fax, as
these numbers can be different.
5. When the Enter Another? prompt appears, do one of the following:
•
If you want to add another number to the list of junk fax numbers, press
Yes, and then repeat step 4 for each number you want to block.
•
If you are done, press No.
Remove numbers from the junk fax list
If you no longer want to block a fax number, you can remove a number from your junk
fax list.
To remove numbers from the list of junk fax numbers
1. Press Setup.
2. Press Basic Fax Setup, and then press Junk Fax Blocker Setup.
3. Press Remove Number from Junk List.
4. Press the right arrow button to scroll through the numbers you have blocked.
When the number you want to remove appears, press OK to select it.
5. When the Delete Another? prompt appears, do one of the following:
•
If you want to remove another number from the list of junk fax numbers,
press Yes, and then repeat step 4 for each number you want to block.
•
If you are done, press No.
Receive faxes to your computer (Fax to PC)
Use Fax to PC to automatically receive faxes and save faxes directly to your
computer. With Fax to PC, you can store digital copies of your faxes easily and also
eliminate the hassle of dealing with bulky paper files. Received faxes are saved as
TIFF (Tagged Image File Format). Once the fax is received, you get a notification with
a link to the folder where the fax is saved.
The files are named in the following method: XXXX_YYYYYYYY_ZZZZZZ.tif, where X
is the sender's information, Y is the date, and Z is the time that the fax was received.
NOTE: Fax to PC is available for receiving black-and-white faxes only. Color
faxes are printed instead of being saved to the computer.
NOTE: Fax to PC is only supported on Windows.
This section contains the following topics:
•
•
Activate Fax to PC
Use the Fax to PC Setup Wizard to activate Fax to PC. The Fax to PC Setup Wizard
can be started from the Solution Center.
63
Receive a fax
Chapter 7
NOTE: If you turn on Fax to PC, make sure the Backup Fax Reception is set to
"On".
Fax to PC requirements:
•
The administrator program, the computer that activated the Fax to PC feature,
must be on at all times. Only one computer can act as the Fax to PC administrator
computer.
•
The destination folder's computer or server, if different than the Fax to PC
administrator computer, must be on at all times. The destination computer must
also be awake, faxes will not be saved if the computer is asleep or in hibernate
mode.
•
•
HP Digital Imaging monitor in Windows Taskbar must be on at all times.
Paper must be loaded in the input tray.
To start the Fax to PC Setup Wizard from the Solution Center
2. Select Settings, and then select Fax to PC Setup Wizard.
3. Follow the onscreen instructions to set up Fax to PC.
Modify Fax to PC settings
You can update the Fax to PC settings from your computer at any time from the Fax
settings page in the Solution Center. You can turn off Fax to PC and disable printing
faxes from the device control panel.
To modify Fax to PC settings from the device control panel
1. Press the Setup button, select Basic Fax Settings, and then Fax to PC.
2. Select the setting that you want to change. You can change the following settings:
•
View PC hostname: View the name of the computer that is set up to
administer Fax to PC.
•
Turn Off: Turn off Fax to PC.
NOTE: Use the Solution Center to turn on Fax to PC.
•
Disable Fax Print: Choose this option to print faxes as they are received. If
you turn off printing, color faxes will still print.
To modify Fax to PC settings from the Solution Center
2. Select Settings, and then select Fax Settings.
3. Select the Fax to PC Settings tab.
4. Make any changes to the settings you want to modify. Press OK.
NOTE: Any changes you make will overwrite the original settings.
64
Fax
Change fax settings
After completing the steps in the getting started guide that came with the device, use
the following steps to change the initial settings or to configure other options for faxing.
This section contains the following topics:
•
•
•
•
•
•
•
•
Configure the fax header
The fax header prints your name and fax number on the top of every fax you send. HP
recommends that you set up the fax header by using the software that you installed
with the device. You can also set up the fax header from the device control panel, as
described here.
NOTE: In some countries/regions, the fax header information is a legal
requirement.
To set or change the fax header
1. Press Setup.
2. Press Basic Fax Setup, and then press Fax Header.
3. Enter your personal or company name using the numeric keypad, and then press OK.
4. Enter your fax number by using the numeric keypad, and then press OK.
Set the answer mode (Auto answer)
The answer mode determines whether the device answers incoming calls.
•
Turn on the Auto Answer setting if you want the device to answer faxes
automatically. The device answers all incoming calls and faxes.
•
Turn off the Auto Answer setting if you want to receive faxes manually. You must
be available to respond in person to the incoming fax call or the device does not
receive faxes.
To set the answer mode to manual or automatic via the device control panel
▲ Press Auto Answer to turn the light on or off, as appropriate for your setup.
When the Auto Answer light is on, the device answers calls automatically. When
the light is off, the it does not answer calls.
65
Change fax settings
Chapter 7
Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings occur before
incoming calls are automatically answered.
The Rings to Answer setting is important if you have an answering machine on the
same phone line as the device, because you want the answering machine to answer
the phone before the device does. The number of rings to answer for the device
should be greater than the number of rings to answer for the answering machine.
For example, set your answering machine to a low number of rings and the device to
answer in the maximum number of rings. (The maximum number of rings varies by
country/region.) In this setup, the answering machine answers the call and the device
monitors the line. If the device detects fax tones, it receives the fax. If the call is a
voice call, the answering machine records the incoming message.
To set the number of rings before answering via the device control panel
1. Press Setup.
2. Press Basic Fax Setup, and then press Rings to Answer.
3. Enter the appropriate number of rings by using the keypad, or press the left or right
arrow button to change the number of rings.
4. Press OK to accept the setting.
Change the answer ring pattern for distinctive ring
Many phone companies offer a distinctive ring feature that allows you to have several
phone numbers on one phone line. When you subscribe to this service, each number
is assigned a different ring pattern. You can set up the device to answer incoming calls
that have a specific ring pattern.
If you connect the device to a line with distinctive ring, have your telephone company
assign one ring pattern to voice calls and another ring pattern to fax calls. HP
recommends that you request double or triple rings for a fax number. When the device
detects the specified ring pattern, it answers the call and receives the fax.
If you do not have a distinctive ring service, use the default ring pattern, which is All
Rings.
NOTE: The HP fax cannot receive faxes when the main phone number is off the
hook.
To change the answer ring pattern for distinctive ring via the device control panel
1. Verify that the device is set to answer fax calls automatically.
2. Press Setup.
3. Press Advance Fax Setup, and then press Distinctive Ring.
4. Press the right arrow button to select an option, and then press OK.
When the phone rings with the ring pattern assigned to your fax line, the device
answers the call and receives the fax.
66
Fax
Set the fax error correction mode
Typically, the device monitors the signals on the phone line while it is sending or
receiving a fax. If it detects an error signal during the transmission and the error-
correction setting is on, the device can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax, and
you want to accept the errors in the transmission. Turning off the setting might be
useful when you are trying to send a fax to another country/region or receive a fax
from another country/region, or if you are using a satellite phone connection.
To set the fax error-correction mode
▲ Device control panel: Press Fax Menu, open the Advance Fax Setup menu,
and then use the Error correction mode option.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is
Tone. Do not change the setting unless you know that your phone line cannot use
tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
▲ Device control panel: Press Setup, press Basic Fax Setup, and then use the
Tone or Pulse Dialing option.
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not
answer or was busy, the device attempts to redial based on the settings for the busy-
redial and no-answer-redial options. Use the following procedure to turn the options on
or off.
•
Busy redial: If this option is turned on, the device redials automatically if it
receives a busy signal. The factory-set default for this option is ON.
•
No answer redial: If this option is turned on, the device redials automatically if the
receiving fax machine does not answer. The factory-set default for this option is OFF.
To set the redial options
▲ Device control panel: Press Setup, press Advance Fax Setup, and then use the
Busy Redial or No Answer Redial options.
Set the fax speed
You can set the fax speed used to communicate between your device and other fax
machines when sending and receiving faxes. The default fax speed is Fast.
67
Change fax settings
Chapter 7
If you use one of the following, setting the fax speed to a slower speed might be
required:
•
•
•
•
An Internet phone service
A PBX system
Fax over Internet Protocol (FoIP)
An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, you might want to try setting
the Fax Speed setting to Medium or Slow. The following table provides the available
fax speed settings.
Fax speed setting
Fast
Fax speed
v.34 (33600 baud)
v.17 (14400 baud)
v.29 (9600 baud)
Medium
Slow
To set the fax speed from the device control panel
1. Press Setup.
2. Select Advanced Fax Setup, and then press Fax Speed.
3. Select an option using the arrow keys, and then press OK.
Fax over the Internet
You may subscribe to a low cost phone service that allows you to send and receive
faxes with your device by using the Internet. This method is called Fax over Internet
Protocol (FoIP). You probably use a FoIP service (provided by your telephone
company) if you:
•
•
Dial a special access code along with the fax number, or
Have an IP converter box that connects to the Internet and provides analog phone
ports for the fax connection.
NOTE: You can only send and receive faxes by connecting a phone cord to the
port labeled "1-LINE" on the device. This means that your connection to the
Internet must be done either through a converter box (which supplies regular
analog phone jacks for fax connections) or your telephone company.
Some Internet faxing services do not work properly when the device is sending and
receiving faxes at high speed (33600bps). If you experience problems sending and
receiving faxes while using an Internet fax service, use a slower fax speed. You can
do this by changing the Fax Speed setting from High (the default) to Medium. For
If you have questions about internet faxing, contact your internet faxing services
support department.
68
Fax
Test fax setup
You can test your fax setup to check the status of the device and to make sure it is set
up properly for faxing. Perform this test after you have completed setting up the device
for faxing. The test does the following:
•
•
•
•
•
•
Tests the fax hardware
Verifies the correct type of phone cord is connected to the device
Checks that the phone cord is plugged into the correct port
Checks for a dial tone
Checks for an active phone line
Tests the status of your phone line connection
The device prints a report with the results of the test. If the test fails, review the report
for information on how to fix the problem and rerun the test.
To test fax setup
1. Set up the device for faxing according to your particular home or office setup
instructions.
2. Make sure the print cartridges are installed, and that full-size paper is loaded in the
input tray before starting the test.
3. From the device control panel, press Setup.
4. Select Tools, and then select Run Fax Test.
The device displays the status of the test on the display and prints a report.
5. Review the report.
•
If the test passes and you are still having problems faxing, check the fax
settings listed in the report to verify the settings are correct. A blank or
incorrect fax setting can cause problems faxing.
•
If the test fails, review the report for more information on how to fix any
problems found.
Use reports
You can set up the device to print error reports and confirmation reports automatically
for each fax you send and receive. You can also manually print system reports as
required; these reports provide useful system information about the device.
By default, the device is set to print a report only if there is a problem sending or
receiving a fax. A confirmation message that indicates whether a fax was successfully
sent appears briefly on the control-panel display after each transaction.
This section contains the following topics:
•
•
•
69
Use reports
Chapter 7
Print fax confirmation reports
If you require printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either On Fax
Send or Send & Receive.
The default fax confirmation setting is Off. This means that a confirmation report is not
printed for each fax sent or received. A confirmation message indicating whether a fax
was successfully sent appears briefly on the control-panel display after each
transaction.
To enable fax confirmation
1. Press Setup.
2. Press Print Report, and then Fax Confirmation.
3. Press the right arrow button to select one of the following, and then press OK.
Off
Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.
On Fax Send
Prints a fax confirmation report for every fax you send.
Prints a fax confirmation report for every fax you receive.
Prints a fax confirmation report for every fax you send and receive.
On Fax Receive
Send & Receive
TIP: If you choose On Fax Send or Send & Receive, and scan your fax to
send from memory, you can include an image of the first page of the fax on the
Fax Sent Confirmation report. Press Setup, press Fax Confirmation, and
then press On Fax Send again. Select On from the Image on Fax Send
Report menu.
Print fax error reports
You can configure the device so that it automatically prints a report when there is an
error during transmission or reception.
To set the device to print fax error reports automatically
1. Press Setup.
2. Press Print Report, and then press Fax Error Report.
3. Press the right arrow button to select one of the following, and then press OK.
Send & Receive
Off
Prints whenever a fax error occurs. This is the default setting.
Does not print any fax error reports.
On Fax Send
On Fax Receive
Prints whenever a transmission error occurs.
Prints whenever a receiving error occurs.
70
Fax
Print and view the fax log
The logs list faxes that have been sent from the device control panel and all faxes that
have been received.
You can print a log of faxes that have been received and sent by the device. Each
entry in the log contains the following information:
•
•
•
•
•
•
Transmission date and time
Type (whether received or sent)
Fax number
Duration
Number of pages
Result (status) of transmission
To view the fax log from the HP photo and imaging software
1. At the computer, open the HP photo and imaging software. For more information,
2. See the onscreen Help for the HP photo and imaging software for further
instructions.
The log lists faxes that have been sent from the device control panel and the HP
photo and imaging software and all faxes that have been received.
To print the fax log from the device control panel
1. On the device control panel, press Setup.
2. Press the arrow key to move down to Print Report, and then press OK.
3. Press the arrow key to move down to Fax Log, and then press OK.
4. Press OK again to print the log.
Cancel a fax
You can cancel a fax you are sending or receiving at any time.
To cancel a fax
▲ Press Cancel on the device control panel to stop a fax you are sending or
receiving. If the device does not stop faxing, press Cancel again.
The device prints any pages it has already started printing and then cancels the
remainder of the fax. This can take a few moments.
To cancel a number you are dialing
▲ Press Cancel to cancel a number you are currently dialing.
Cancel a fax
71
8 Configure and manage
This section is intended for the administrator or individual who is responsible for
managing the device. This section contains information about the following topics.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
Manage the device
The following, common tools can be used to manage the device. For information about
NOTE: Specific procedures might include other methods.
Windows
•
•
•
Device control panel
Printer driver
Toolbox
Mac OS
•
•
Device control panel
HP Printer Utility
This section contains the following topics:
•
•
72
Configure and manage
Monitor the device
This section provides instructions for monitoring the device.
Use this tool...
to obtain the following information...
Device control panel
Obtain information about the status of jobs
that are being processed, the operating status
of the device, and the status of print cartridges.
Toolbox (Windows)
Print cartridge information: Click the
Estimated Ink Levels tab to view the ink-
level information, and then scroll to display
the Cartridge Details button. Click the
Cartridge Details button to view information
about replacement print cartridges and
expiration dates.*
HP Printer Utility (Mac OS)
Ink cartridge information: Open the
Information and Support panel and click
Supplies Status. *
* Ink level warnings and indicators provide estimates for planning purposes only.
When you receive a low-ink warning message, consider having a replacement
cartridge available to avoid possible printing delays. You do not need to replace the
print cartridges until print quality becomes unacceptable.
Administer the device
This section provides information about administering the device and modifying
settings.
Use this tool...
to do the following...
Language and country/region: Press Setup,
Device control panel
•
and then open the Preferences menu. If you
do not see your country/region, press 99, and
then find your country/region in the list.
Device control panel volume: Press Setup,
and then open the Preferences menu.
•
•
•
•
•
•
Fax sound volume: Press Setup, and then
select Fax Sound Volume.
Automatic report printing: Press Setup, and
then open the Advance Fax Setup menu.
Set the dial type: Press Setup, and then open
the Basic Fax Setup menu.
Set up redial options: Press Setup, and then
open the Advance Fax Setup menu.
Set the date and time: Press Setup, press
Tools, and then press Date and Time.
Toolbox (Windows)
Perform device maintenance tasks: Click the
Services tab.
Manage the device
73
Chapter 8
(continued)
Use this tool...
to do the following...
Change tray settings: Click Paper Handling
from the Printer Settings panel.
HP Printer Utility (Mac OS)
•
Perform device maintenance tasks: Open
the Information and Support panel, and then
click the option for the task that you want to
perform.
•
Use device management tools
This section contains the following topics:
•
•
•
Toolbox (Windows)
The Toolbox provides maintenance information about the device.
NOTE: The Toolbox can be installed from the Starter CD by selecting the full
installation option if the computer meets the system requirements.
This section contains the following topics:
•
•
Open the Toolbox
•
From the HP Solution Center, click the Settings menu, point to Print Settings,
and then click Printer Toolbox.
•
Right-click the HP Digital Imaging Monitor in the taskbar, point to Printer Model
Name and then click Display Printer Toolbox.
Toolbox tabs
The Toolbox contains the following tabs.
Tabs
Contents
Estimated Ink Level
Ink Level Information: Shows estimated ink
level for each cartridge.
•
NOTE: Ink level warnings and indicators
provide estimates for planning purposes only.
When you receive a low-ink warning message,
consider having a replacement cartridge
available to avoid possible printing delays. You
do not need to replace the print cartridges until
print quality becomes unacceptable.
Shop Online: Provides access to a Web site
from which you can order printing supplies for
the device online.
•
74
Configure and manage
(continued)
Tabs
Contents
Dial a cartridge: Shows telephone numbers
•
that you can call to order supplies for the
device. Telephone numbers are not available
for all countries/regions.
Cartridge Details: Shows order numbers of
the installed print cartridges.
•
•
Print Diagnostic Page: Allows you to print the
self-test diagnostic page of the device. This
page contains information about the device
and the supplies. For more information, see
Services
Print a Test Page: Allows you to print the self-
test report of the device. This page contains
information about the device and print
cartridges. For more information, see
•
Align Print Cartridges: Guides you through
aligning the print cartridges. For more
•
•
•
Clean Print Cartridges: Guides you through
cleaning the print cartridgeys. For more
Calibrate color: Allows you to calibrate the
colors that are printed.
Embedded Web server
When the device is connected to a network, you can use the embedded Web server to
view status information, change settings, and manage it from your computer.
NOTE: For a list of system requirements for the embedded Web server, see
Some settings might be restricted by the requirement for a password.
You can open and use the embedded Web server without being connected to the
Internet; however, some features will not be available.
This section contains the following topics:
•
•
To open the embedded Web server
You can open the embedded Web server by using these methods:
NOTE: To open the embedded Web server from the printer driver (Windows), or
the HP Printer Utility (Mac OS), the device must be on a network and must have an
IP address.
Use device management tools
75
Chapter 8
•
Web browser: In a supported Web browser on your computer, type the IP address
that has been assigned to the device.
For example, if the IP address is 123.123.123.123, type the following address into
the Web browser: http://123.123.123.123
The IP address for the device is listed on the self-test diagnostic page. For more
After opening the embedded Web server, you can bookmark it so that you can
return to it quickly in the future.
•
HP Printer Utility (Mac OS): On the Printer Settings panel, click Additional
Settings, and then click the Open Embedded Web Server button.
Embedded Web server pages
The embedded Web server contains pages that you can use to view product
information and change device settings. The pages also contain links to other e-
services.
Pages/buttons
Contents
Information page
Shows status information about the device, its ink
supplies and usage, and a log of device events
(such as errors).
Settings page
Shows the settings that have been configured for
the device and gives you the ability to change
these settings.
Networking page
Shows network status and the network settings that
have been configured for the device. These pages
only appear if the device is connected to a network.
Bluetooth page
Shows the Bluetooth settings that have been
configured for the device and gives you the ability
to change these settings.
Support and Order Supplies buttons
Support provides a number of support services.
Order Supplies connects you to online ordering of
supplies.
HP Printer Utility (Mac OS)
The HP Printer Utility contains tools to configure print settings, calibrate the device,
order supplies online, and find Web site support information.
This section contains the following topics:
•
•
76
Configure and manage
Open the HP Printer Utility
To open the HP Printer Utility from the Desktop
1. From the Finder, select Computer from the Go menu.
2. Select Applications, and then double-click Utilities.
3. Double-click Printer Setup Utility.
4. Select the HP device and click the Utility button.
5. Select the HP device and click the Launch Utility.
To open the HP Printer Utility from the HP Device Manager
1. Click on the HP Device Manager listed in the Dock.
2. Select Maintain printer from the Information and Settings menu.
3. Select the HP device and click the Launch Utility.
HP Printer Utility panels
Information and Support panel
•
•
•
Supplies Status: Shows the information about currently installed print cartridges.
Supply Info: Shows the print cartridge replacement options.
Device Information: Displays information about the model and serial number.
This page contains information about the device and the supplies.
•
•
•
Clean: Guides you through cleaning the print cartridges.
Align: Guides you through aligning the print cartridges.
HP Support: Gain access to HP Web site where you can find support for the
device, register the device, and find information about returning and recycling used
printing supplies.
Understand the self-test diagnostic page
Use the self-test diagnostic page to:
•
•
View current device information and print cartridge status
Help troubleshoot problems
The self-test diagnostic page also contains a log of recent events.
77
Understand the self-test diagnostic page
Chapter 8
If you need to call HP, it is often useful to print the self-test diagnostic page before
calling.
1. Printer Information: Shows device information (such as the product name, model
number, serial number, and firmware version number), and the number of pages
printed from the tray.
2. Nozzle test pattern: Missing lines indicate problems with the print cartridges. Try
cleaning the cartridges, or replacing the cartridges.
3. Color bars and boxes: Uneven, faded, or faint color bars or boxes indicate low
ink. Check the ink levels.
4.
Event Log: Shows a log of recent events that have occurred.
To print the Self-Test Diagnostic Page
•
Device control panel: Press Setup, select Print Report, select Self-Test Report,
and then press OK.
•
•
Toolbox (Windows): Click the Services tab, and then click Print a Test Page.
HP Printer Utility (Mac OS): Click Device Information from the Information and
Support panel, and then click Print Configuration Page.
Understand the network configuration page
If the device is connected to a network, you can print a network configuration page to
view the network settings for the device. You can use the network configuration page
78
Configure and manage
to help troubleshoot network connectivity problems. If you need to call HP, it is often
useful to print this page before calling.
Network Configuration Page
1. General Information: Shows information about the current status and active
connection type of the network, and other information, such as the URL of the
embedded Web server.
2. 802.3 Wired: Shows information about the active wired network connection, such
as the IP address, subnet mask, default gateway, as well as the hardware address
of the device.
3. 802.11 Wireless: Shows information about the active wireless network connection,
such as the IP address, the communication mode, the network name,
authentication type, and signal strength.
4. mDNS: Shows information about the active Multicast Domain Name System
(mDNS) connection. mDNS services are typically used on small networks for IP
address and name resolution (through UDP port 5353) where a conventional DNS
server is not used.
5. SLP: Shows information about the current Service Location Protocol (SLP)
connection. SLP is used by network management applications for device
management. The device supports SNMPv1 protocol on IP networks.
To print the network configuration page from the device control panel
•
If the device has a two-line display: Press the Setup button, select Network
Setup, select Print Network Settings, and then press OK.
•
If the device has a color display: Press the Setup button, select Network, select
View Network Settings, select Print Network Configuration Page, and then
press OK.
This section contains the following topics:
•
79
Understand the network configuration page
Chapter 8
Channel range definitions
The following table lists the 802.11 Wireless channel range definitions.
The first digit stands for Locale Number
Locale 0: Channels 1-11:
high-power 802.11b
low-power 802.11g
•
•
Locale 1: Channels 1-13:
low-power 802.11b
low-power 802.11g
•
•
Locale 2: Channels 1-14:
low-power 802.11b
low-power 802.11g
•
•
NOTE: 802.11g is not allowed on channel 14.
The second digit stands for Ad-Hoc
Compatibility Mode
0: Ad-Hoc connection status nominal
1: Ad-Hoc always appears connected
The third digit stands for Infrastructure Rate
Restriction
0: 802.11b or 802.11g
1: 802.11b only
The fourth digit stands for Ad-Hoc Rate
Restriction
0: 802.11b or 802.11g
1: 802.11b only
Configure network options
You can manage network settings for the device through the device control panel as
described in the next section. Additional advanced settings are available in the
embedded Web server, a configuration and status tool you access from your Web
browser using an existing network connection to the device. For more information, see
This section contains the following topics:
•
•
Change basic network settings
The control-panel options enable you to set up and manage a wireless connection and
to perform a variety of network management tasks. This includes viewing the network
settings, restoring the network defaults, turning the wireless radio on and off, and
changing the network settings.
This section contains the following topics:
•
•
•
80
Configure and manage
Use the Wireless Setup Wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless
connection to your device. For more information on setting up a wireless connection
View and print network settings
You can display a summary of the network settings on the device control panel, or you
can print a more detailed network configuration page. The network configuration page
lists all of the important network settings such as the IP address, link speed, DNS, and
mDNS. For information on the network settings, see Understand the network
1. Press the Setup button.
2. Press the arrow keys until Network is highlighted, and then press OK.
3. Do one of the following:
•
•
•
To display wired (Ethernet) network settings, select View Network Settings,
and then select Display Wired Summary.
To display wireless network settings, select View Network Settings, and then
select Display Wireless Summary.
To print the network configuration page, select View Network Settings, and
then select Print Network Configuration Page.
Turn the wireless radio on and off
The wireless radio is on by default, as indicated by the blue light on the front of the
device. In order to stay connected to a wireless network, the radio must stay on.
However, if your device is connected to a wired network or you have a USB
connection, the radio is not used. In this case you might want to turn the radio off.
1. Press the Setup button.
2. Press the arrow keys until Network is highlighted, and then press OK.
3. Select Wireless Radio, and then select Yes to turn the radio on, or No to turn the
radio off.
Change advanced network settings
The advanced network settings are provided for your convenience. However, unless
you are an advanced user, you should not change any of these settings. The
advanced settings include Link Speed, IP Settings, and Memory Card Security.
This section contains the following topics:
•
•
•
Configure network options
81
Chapter 8
Set link speed
You can change the speed at which data is transmitted over the network. The default
is Automatic.
1. Press the Setup button.
2. Press the arrow keys until Network is highlighted, then press OK.
3. Select Advanced Setup, then select Link Speed.
4. Press the number next to the link speed that matches your network hardware:
•
•
•
•
•
1. Automatic
2. 10-Full
3. 10-Half
4. 100-Full
5. 100-Half
To View IP settings
•
Color display: To view the IP address of the device from the device control panel,
press the Setup button, select Network, select View Network Settings, and then
select either Display Wired Summary or Display Wireless Summary.
•
Two-line display: To view the IP address of the device, you must print the network
configuration page. For more information, see Understand the network
To Change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings
automatically. However, if you are an advanced user, you might want to manually
change the IP address, subnet mask, or the default gateway.
CAUTION: Be careful when manually assigning an IP address. If you enter an
invalid IP address during the installation, your network components will not be able
to connect with the device.
1. Press the Setup button.
2. Press the arrow keys until Network is highlighted, and then press OK.
3. Select Advanced Setup, select IP Settings, and then select Manual IP Settings.
4. Press the number next to the IP setting:
•
•
•
1. IP Address
2. Subnet Mask
3. Default Gateway
5. Enter your changes, and then press OK.
Set up faxing for the device
After completing all the steps in the getting started guide, use the instructions in this
section to complete your fax setup. Keep your getting started guide for later use.
In this section, you will learn how to set up the device so that faxing works successfully
with equipment and services you might already have on the same phone line.
82
Configure and manage
TIP: You can also use the Fax Setup Wizard (Windows) or HP Fax Setup Utility
(Mac OS) to help you quickly set up some important fax settings such as the
answer mode and fax header information. You can access the Fax Setup Wizard
(Windows) or HP Fax Setup Utility (Mac OS) through the software you installed
with the device. After you run the Fax Setup Wizard (Windows) or HP Fax Setup
Utility (Mac OS), follow the procedures in this section to complete your fax setup.
This section contains the following topics:
•
•
Set up faxing (parallel phone systems)
Before you begin setting up the device for faxing, determine which kind of phone
system your country/region uses. The instructions for fax setup differ depending on
whether you have a serial- or parallel-type phone system.
•
If you do not see your country/region listed in the table below, you probably have a
serial-type phone system. In a serial-type phone system, the connector type on
your shared telephone equipment (modems, phones, and answering machines)
does not allow a physical connection to the "2-EXT" port on the device. Instead, all
equipment must be connected at the telephone wall jack.
NOTE: In some countries/regions that use serial-type phone systems, the
phone cord that came with the device might have an additional wall plug
attached to it. This enables you to connect other telecom devices to the wall
jack where you plug in the device.
•
If your country/region is listed in the table below, you probably have a parallel-type
telephone system. In a parallel-type phone system, you are able to connect shared
telephone equipment to the phone line by using the "2-EXT" port on the back of
the device.
NOTE: If you have a parallel-type phone system, HP recommends you use
the 2-wire phone cord supplied with the device to connect it to the telephone
wall jack.
Table 8-1 Countries/regions with a parallel-type phone system
Argentina
Canada
Colombia
Indonesia
Korea
Australia
Chile
Brazil
China
Greece
India
Ireland
Japan
Latin America
Philippines
Russia
Malaysia
Poland
Saudi Arabia
Taiwan
Mexico
Portugal
Singapore
Spain
83
Set up faxing for the device
Chapter 8
Countries/regions with a parallel-type phone system (continued)
Thailand
Vietnam
USA
Venezuela
If you are unsure which kind of telephone system you have (serial or parallel), check
with your telephone company.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
Choose the correct fax setup for your home or office
To fax successfully, you need to know what types of equipment and services (if any)
share the same phone line with the device. This is important because you might need
to connect some of your existing office equipment directly to the device, and you might
also need to change some fax settings before you can fax successfully.
To determine the best way to set up the device in your home or office, first read
through the questions in this section and record your answers. Next, refer to the table
in the following section and choose the recommended setup case based on your
answers.
Make sure to read and answer the following questions in the order they are presented.
1. Do you have a digital subscriber line (DSL) service through your telephone
company? (DSL might be called ADSL in your country/region.)
do not need to continue answering questions.
If you answered No, continue answering questions.
2. Do you have a private branch exchange (PBX) phone system or an integrated
services digital network (ISDN) system?
If you answered Yes, proceed directly to Case C: Set up the device with a PBX
phone system or an ISDN line. You do not need to continue answering questions.
If you answered No, continue answering questions.
84
Configure and manage
3. Do you subscribe to a distinctive ring service through your telephone company that
provides multiple phone numbers with different ring patterns?
If you answered Yes, proceed directly to Case D: Fax with a distinctive ring service
on the same line. You do not need to continue answering questions.
If you answered No, continue answering questions.
Are you unsure if you have distinctive ring? Many phone companies offer a
distinctive ring feature that allows you to have several phone numbers on one
phone line.
When you subscribe to this service, each phone number will have a different ring
pattern. For example, you can have single, double, and triple rings for the different
numbers. You might assign one phone number with a single ring to your voice
calls, and another phone number with double rings to your fax calls. This allows
you to tell the difference between voice and fax calls when the phone rings.
4. Do you receive voice calls at the same phone number you will use for fax calls on
the device?
Continue answering questions.
5. Do you have a computer dial-up modem on the same phone line as the device?
Are you unsure if you use a computer dial-up modem? If you answer Yes to any of
the following questions, you are using a computer dial-up modem:
•
•
•
Do you send and receive faxes directly to and from your computer software
applications through a dial-up connection?
Do you send and receive e-mail messages on your computer through a dial-up
connection?
Do you access the Internet from your computer through a dial-up connection?
Continue answering questions.
6. Do you have an answering machine that answers voice calls at the same phone
number you will use for fax calls on the device?
Continue answering questions.
7. Do you subscribe to a voice mail service through your telephone company at the
same phone number you will use for fax calls on the device?
After you have completed answering the questions, proceed to the next section to
select your fax setup case.
Select your fax setup case
Now that you have answered all the questions about the equipment and services that
share the phone line with the device, you are ready to choose the best setup case for
your home or office.
From the first column in the following table, choose the combination of equipment and
services applicable to your home or office setting. Then look up the appropriate setup
case in the second or third column based on your phone system. Step-by-step
instructions are included for each case in the sections that follow.
If you have answered all the questions in the previous section and have none of the
described equipment or services, choose "None" from the first column in the table.
85
Set up faxing for the device
Chapter 8
NOTE: If your home or office setup is not described in this section, set up the
device as you would a regular analog phone. Make sure you use the phone cord
supplied in the box to connect one end to your telephone wall jack and the other
end to the port labeled 1-LINE on the back of the device. If you use another phone
cord, you might experience problems sending and receiving faxes.
Other equipment/services
sharing your fax line
Recommended fax setup
for parallel-type phone
systems
Recommended fax setup
for serial-type phone
systems
None
(You answered No to all
questions.)
DSL service
Refer to your country in
(You answered Yes to
question 1 only.)
PBX or ISDN system
Refer to your country in
(You answered Yes to
question 2 only.)
Distinctive ring service
(You answered Yes to
question 3 only.)
Voice calls
(You answered Yes to
question 4 only.)
Voice calls and voice mail
service
(You answered Yes to
questions 4 and 7 only.)
Computer dial-up modem
Not applicable.
(You answered Yes to
question 5 only.)
up modem
(You answered Yes to
questions 4 and 5 only.)
Voice calls and answering
machine
Not applicable.
Not applicable.
(You answered Yes to
questions 4 and 6 only.)
Voice calls, computer dial-up
modem, and answering
machine
(You answered Yes to
questions 4, 5, and 6 only.)
86
Configure and manage
(continued)
Other equipment/services
sharing your fax line
Recommended fax setup
for parallel-type phone
systems
Recommended fax setup
for serial-type phone
systems
Voice calls, computer dial-up
(You answered Yes to
questions 4, 5, and 7 only.)
Case A: Separate fax line (no voice calls received)
If you have a separate phone line on which you receive no voice calls, and you have
no other equipment connected on this phone line, set up the device as described in
this section.
Figure 8-1 Back view of the device
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the 1-LINE port
To set up the device with a separate fax line
1. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
2. Turn on the Auto Answer setting.
3. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
4. Run a fax test.
When the phone rings, the device answers automatically after the number of rings you
set in the Rings to Answer setting. The device begins emitting fax reception tones to
the sending fax machine and receives the fax.
87
Set up faxing for the device
Chapter 8
Case B: Set up the device with DSL
If you have a DSL service through your telephone company, and do not connect any
equipment to the device, use the instructions in this section to connect a DSL filter
between the telephone wall jack and the device. The DSL filter removes the digital
signal that can interfere with the device, so the device can communicate properly with
the phone line. (DSL might be called ADSL in your country/region.)
NOTE: If you have a DSL line and you do not connect the DSL filter, you will not
be able to send and receive faxes with the device.
Figure 8-2 Back view of the device
1
2
3
Telephone wall jack
DSL (or ADSL) filter and cord supplied by your DSL provider
Use the phone cord supplied in the box with the device to connect to
the 1-LINE port
To set up the device with DSL
1. Obtain a DSL filter from your DSL provider.
2. Using the phone cord supplied in the box with the device, connect one end to the
open port on the DSL filter, and then connect the other end to the port labeled 1-
LINE on the back of the device.
NOTE: If you do not use the supplied cord to connect from the DSL filter to
the device, you might not be able to fax successfully. This special phone cord
is different from the phone cords you might already have in your home or office.
As only one phone cord is supplied, you may will need to obtain additional
phone cords for this setup.
3. Connect an additional phone cord from the DSL filter to the telephone wall jack.
4. Run a fax test.
88
Configure and manage
Case C: Set up the device with a PBX phone system or an ISDN line
If you are using either a PBX phone system or an ISDN converter/terminal adapter,
make sure you do the following:
•
If you are using either a PBX or an ISDN converter/terminal adaptor, connect the
device to the port that is designated for fax and phone use. Also, make sure that
the terminal adapter is set to the correct switch type for your country/region, if
possible.
NOTE: Some ISDN systems allow you to configure the ports for specific
phone equipment. For example, you might have assigned one port for
telephone and Group 3 fax and another port for multiple purposes. If you have
problems when connected to the fax/phone port of your ISDN converter, try
using the port designated for multiple purposes; it might be labeled "multi-
combi" or something similar.
•
If you are using a PBX phone system, set the call waiting tone to "off."
NOTE: Many digital PBX systems include a call-waiting tone that is set to "on"
by default. The call waiting tone will interfere with any fax transmission, and
you will not be able to send or receive faxes with the device. Refer to the
documentation that came with your PBX phone system for instructions on how
to turn off the call-waiting tone.
•
•
If you are using a PBX phone system, dial the number for an outside line before
dialing the fax number.
Make sure you use the supplied cord to connect from the telephone wall jack to
the device. If you do not, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your home
or office. If the supplied phone cord is too short, you can purchase a coupler from
your local electronics store and extend it.
Case D: Fax with a distinctive ring service on the same line
If you subscribe to a distinctive ring service (through your telephone company) that
allows you to have multiple phone numbers on one phone line, each with a different
ring pattern, set up the device as described in this section.
Figure 8-3 Back view of the device
89
Set up faxing for the device
Chapter 8
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the 1-LINE port
To set up the device with a distinctive ring service
1. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
2. Turn on the Auto Answer setting.
3. Change the Distinctive Ring setting to match the pattern that the telephone
company assigned to your fax number.
NOTE: By default, the device is set to answer all ring patterns. If you do not
set the Distinctive Ring to match the ring pattern assigned to your fax
number, the device might answer both voice calls and fax calls or it might not
answer at all.
4. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
5. Run a fax test.
The device automatically answers incoming calls that have the ring pattern you
selected (Distinctive Ring setting) after the number of rings you selected (Rings to
Answer setting). The device begins emitting fax reception tones to the sending fax
machine and receives the fax.
Case E: Shared voice/fax line
If you receive both voice calls and fax calls at the same phone number, and you have
no other office equipment (or voice mail) on this phone line, set up the device as
described in this section.
Figure 8-4 Back view of the device
90
Configure and manage
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the 1-LINE port
3
Telephone (optional)
To set up the device with a shared voice/fax line
1. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
2. Do one of the following:
•
If you have a parallel-type phone system, remove the white plug from the port
labeled 2-EXT on the back of the device, and then connect a phone to this port.
•
If you have a serial-type phone system, you might plug your phone directly on
top of the device cable which has a wall plug attached to it.
3. Now you need to decide how you want the device to answer calls, automatically or
manually:
•
If you set up the device to answer calls automatically, it answers all incoming
calls and receives faxes. The device will not be able to distinguish between fax
and voice calls in this case; if you suspect the call is a voice call, you will need
to answer it before the device answers the call. To set up the device to answer
calls automatically, turn on the Auto Answer setting.
•
If you set up the device to answer faxes manually, you must be available to
respond in person to incoming fax calls or the device cannot receive faxes. To
set up the device to answer calls manually, turn off the Auto Answer setting.
4. Run a fax test.
If you pick up the phone before the device answers the call and hear fax tones from a
sending fax machine, you will need to answer the fax call manually.
Case F: Shared voice/fax line with voice mail
If you receive both voice calls and fax calls at the same phone number, and you also
subscribe to a voice mail service through your telephone company, set up the device
as described in this section.
NOTE: You cannot receive faxes automatically if you have a voice mail service at
the same phone number you use for fax calls. You must receive faxes manually;
this means you must be available to respond in person to incoming fax calls. If you
want to receive faxes automatically instead, contact your telephone company to
subscribe to a distinctive ring service, or to obtain a separate phone line for faxing.
91
Set up faxing for the device
Chapter 8
Figure 8-5 Back view of the device
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the "1-LINE" port
To set up the device with voice mail
1. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
2. Turn off the Auto Answer setting.
3. Run a fax test.
You must be available to respond in person to incoming fax calls, or the device cannot
receive faxes. You must initiate the manual fax before voicemail picks up the line.
Case G: Fax line shared with computer modem (no voice calls received)
If you have a fax line on which you receive no voice calls, and you also have a
computer modem connected on this line, set up the device as described in this section.
NOTE: If you have a computer dial-up modem, your computer dial-up modem
shares the phone line with the device. You will not be able to use both your modem
and the device simultaneously. For example, you cannot use the device for faxing
while you are using your computer dial-up modem to send an e-mail or access the
Internet.
•
•
92
Configure and manage
Set up the device with a computer dial-up modem
If you are using the same phone line for sending faxes and for a computer dial-up
modem, follow these directions for setting up the device.
Figure 8-6 Back view of the device
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the "1-LINE" port
3
Computer with modem
To set up the device with a computer dial-up modem
1. Remove the white plug from the port labeled 2-EXT on the back of the device.
2. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the device.
3. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
4. If your modem software is set to receive faxes to your computer automatically, turn
off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the device will not be able to receive faxes.
5. Turn on the Auto Answer setting.
6. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
7. Run a fax test.
When the phone rings, the device automatically answers after the number of rings you
set in the Rings to Answer setting. The device begins emitting fax reception tones to
the sending fax machine and receives the fax.
93
Set up faxing for the device
Chapter 8
Set up the device with a computer DSL/ADSL modem
If you have a DSL line and use that phone line to send faxes, follow these instructions
to set up your fax.
1
2
3
Telephone wall jack
Parallel splitter
DSL/ADSL filter
Connect one end of the phone jack that was supplied with the device
to connect to the 1-LINE port on the back of the device. Connect the
other end of the cord to the DSL/ADSL filter.
4
5
Computer
Computer DSL/ADSL modem
NOTE: You will need to purchase a parallel splitter. A parallel splitter has one
RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line
phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on
the front and a plug on the back.
To set up the device with a computer DSL/ADSL modem
1. Obtain a DSL filter from your DSL provider.
2. Using the phone cord provided in the box with the device, connect one end to the
DSL filter, and then connect the other end to the port labeled 1-LINE on the back
of the device.
NOTE: If you do not use the supplied cord to connect from the DSL filter to
the back of the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
3. Connect the DSL filter to the parallel splitter.
4. Connect the DSL modem to the parallel splitter.
94
Configure and manage
5. Connect the parallel splitter to the wall jack.
6. Run a fax test.
When the phone rings, the device automatically answers after the number of rings you
set in the Rings to Answer setting. The device begins emitting fax reception tones to
the sending fax machine and receives the fax.
Case H: Shared voice/fax line with computer modem
If you receive both voice calls and fax calls at the same phone number, and you also
have a computer modem connected on this phone line, set up the device as described
in this section.
NOTE: Since your computer modem shares the phone line with the device, you
cannot use both your modem and the device simultaneously. For example, you
cannot use the device for faxing while you are using your computer modem to
send an e-mail or access the Internet.
•
•
Shared voice/fax with computer dial-up modem
If you use your phone line for both fax and telephone calls, use these instructions to
set up your fax.
There are two different ways to set up the device with your computer based on the
number of phone ports on your computer. Before you begin, check your computer to
see if it has one or two phone ports.
•
If your computer has only one phone port, you will need to purchase a parallel
splitter (also called a coupler), as shown below. (A parallel splitter has one RJ-11
port on the front and two RJ-11 ports on the back. Do not use a two-line phone
splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front
and a plug on the back.)
Figure 8-7 Example of a parallel splitter
95
Set up faxing for the device
Chapter 8
•
If your computer has one phone port, set up the device as described below.
Figure 8-8 Back view of the device
1
2
Telephone wall jack
Phone cord provided with the device plugged into the 1-LINE port on
the back of the device
3
4
5
Parallel splitter
Computer
Telephone
To set up the device on the same phone line as a computer with one phone port
1. Remove the white plug from the port labeled 2-EXT on the back of the device.
2. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the parallel splitter.
3. Connect a phone cord from the parallel splitter to the port labeled 2-EXT on the
back of the device.
4. Connect a phone to the parallel splitter.
5. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
6. If your modem software is set to receive faxes to your computer automatically, turn
off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the HP device will not be able to receive faxes.
96
Configure and manage
7. Now you need to decide how you want the device to answer calls, automatically or
manually:
•
If you set up the device to answer calls automatically, it answers all incoming
calls and receives faxes. The device will not be able to distinguish between fax
and voice calls in this case; if you suspect the call is a voice call, you will need
to answer it before the device answers the call. To set up the device to answer
calls automatically, turn on the Auto Answer setting.
•
If you set up the device to answer faxes manually, you must be available to
respond in person to incoming fax calls or the device cannot receive faxes. To
set up the device to answer calls manually, turn off the Auto Answer setting.
8. Run a fax test.
NOTE: If your computer has two telephone ports on the back, you do not need to
use a parallel splitter. You can plug the telephone into the “OUT” port on the
computer dial-up modem.
If you pick up the phone before the device answers the call and hear fax tones from a
sending fax machine, you will need to answer the fax call manually.
If you use your phone line for voice, fax, and your computer dial-up modem, follow
these directions to set up your fax.
Shared voice/fax with computer DSL/ADSL modem
Use these instructions if your computer has a DSL/ADSL modem
1
2
3
4
5
6
7
Telephone wall jack
Parallel splitter
DSL/ADSL filter
Phone cord supplied with the device
DSL/ADSL modem
Computer
Telephone
97
Set up faxing for the device
Chapter 8
NOTE: You will need to purchase a parallel splitter. A parallel splitter has one
RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line
phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on
the front and a plug on the back.
To set up the device with a computer DSL/ADSL modem
1. Obtain a DSL filter from your DSL provider.
NOTE: Phones in other parts of the home/office sharing the same phone
number with DSL service will need to be connected to additional DSL filters,
otherwise you will experience noise when making voice calls.
2. Using the phone cord supplied in the box with the devices, connect one end to the
DSL filter, then connect the other end to the port labeled 1-LINE on the back of the
device.
NOTE: If you do not use the supplied cord to connect from the DSL filter to
the device, you might not be able to fax successfully. This special phone cord
is different from phone cords you might already have in your home or office.
3. If you have a parallel-type phone system, remove the white plug from the port
labeled 2-EXT on the back of the device, and then connect a phone to this port.
4. Connect the DSL filter to the parallel splitter.
5. Connect the DSL modem to the parallel splitter.
6. Connect the parallel splitter to the wall jack.
7. Run a fax test.
When the phone rings, the device automatically answers after the number of rings you
set in the Rings to Answer setting. The device begins emitting fax reception tones to
the sending fax machine and receives the fax.
98
Configure and manage
Case I: Shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also
have an answering machine that answers voice calls at this phone number, set up the
device as described in this section.
Figure 8-9 Back view of the device
1
2
Telephone wall jack
Use the phone cord provided to connect to the 1-LINE port on the back of
the device
3
4
Answering machine
Telephone (optional)
To set up the device with a shared voice/fax line with answering machine
1. Remove the white plug from the port labeled 2-EXT on the back of the device.
2. Unplug your answering machine from the telephone wall jack, and connect it to the
port labeled 2-EXT on the back of the device.
NOTE: If you do not connect your answering machine directly to the device,
fax tones from a sending fax machine might be recorded on your answering
machine, and you probably will not be able to receive faxes with the device.
3. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
4. (Optional) If your answering machine does not have a built-in phone, for
convenience you might want to connect a phone to the back of your answering
machine at the "OUT" port.
NOTE: If your answering machine does not let you connect an external
phone, you can purchase and use a parallel splitter (also known as a coupler)
to connect both the answering machine and telephone to the device. You can
use standard phone cords for these connections.
5. Turn on the Auto Answer setting.
99
Set up faxing for the device
Chapter 8
6. Set your answering machine to answer after a low number of rings.
7. Change the Rings to Answer setting on the device to the maximum number of
rings supported by your device. (The maximum number of rings varies by country/
region.)
8. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you
have set, and then plays your recorded greeting. The device monitors the call during
this time, "listening" for fax tones. If incoming fax tones are detected, the device emits
fax reception tones and receives the fax; if there are no fax tones, the device stops
monitoring the line and your answering machine can record a voice message.
Case J: Shared voice/fax line with computer modem and answering machine
If you receive both voice calls and fax calls at the same phone number, and you also
have a computer modem and answering machine connected on this phone line, set up
the HP device as described in this section.
NOTE: Since your computer dial-up modem shares the phone line with the HP
device, you cannot use both your modem and the device simultaneously. For
example, you cannot use the HP device for faxing while you are using your
computer dial-up modem to send an e-mail or access the Internet.
•
•
Shared voice/fax line with computer dial-up modem and answering machine
There are two different ways to set the HP device with your computer based on the
number of phone ports on your computer. Before you begin, check your computer to
see if it has one or two phone ports.
•
If your computer has only one phone port, you will need to purchase a parallel
splitter, as shown below. (A parallel splitter has one RJ-11 port on the front and
two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter,
or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.)
Figure 8-10 Example of a parallel splitter
100
Configure and manage
•
If your computer has one phone port, set up the HP device as described below.
Figure 8-11 Back view of the device
1
2
3
4
5
6
7
Telephone wall jack
Telephone cord connected to the parallel splitter
Parallel splitter
Telephone (optional)
Answering machine
Computer with modem
Use the phone cord supplied in the box with the device to connect to
the "1-LINE" port
To set up the device on the same phone line as a computer with one phone port
1. Remove the white plug from the port labeled 2-EXT on the back of the HP device.
2. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the device.
3. Unplug your answering machine from the telephone wall jack, and connect it to the
port labeled 2-EXT on the back of the device.
NOTE: If you do not connect your answering machine directly to the device,
fax tones from a sending fax machine might be recorded on your answering
machine, and you might not be able to receive faxes with the device.
4. Using the phone cord supplied in the box with the HP device, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE on
the back of the HP device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
101
Set up faxing for the device
Chapter 8
5. (Optional) If your answering machine does not have a built-in phone, for
convenience you might want to connect a phone to the back of your answering
machine at the "OUT" port.
NOTE: If your answering machine does not let you connect an external
phone, you can purchase and use a parallel splitter (also known as a coupler)
to connect both the answering machine and telephone to the device. You can
use standard phone cords for these connections.
6. If your modem software is set to receive faxes to your computer automatically, turn
off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the device will not be able to receive faxes.
7. Turn on the Auto Answer setting.
8. Set your answering machine to answer after a low number of rings.
9. Change the Rings to Answer setting on the HP device to the maximum number of
rings supported by your HP device. (The maximum number of rings varies by
country/region.)
10. Run a fax test.
NOTE: If you are using a computer with two telephone ports, you do not need
a parallel splitter. You can plug the answering machine into the “OUT” port on
the back of the computer.
When the phone rings, your answering machine answers after the number of rings you
have set, and then plays your recorded greeting. The device monitors the call during
this time, "listening" for fax tones. If incoming fax tones are detected, the device emits
fax reception tones and receives the fax; if there are no fax tones, the device stops
monitoring the line and your answering machine can record a voice message.
Shared voice/fax line with computer DSL/ADSL modem and answering machine
1
2
Telephone wall jack
Parallel splitter
102
Configure and manage
(continued)
3
DSL/ADSL filter
4
Phone cord provided with the device connected to the 1-LINE port on
the back of the device
5
6
7
8
DSL/ADSL modem
Computer
Answering machine
Telephone (optional)
NOTE: You will need to purchase a parallel splitter. A parallel splitter has one
RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line
phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on
the front and a plug on the back.
To set up the device with a computer DSL/ADSL modem
1. Obtain a DSL/ADSL filter from your DSL/ADSL provider.
NOTE: Phones in other parts of the home/office sharing the same phone
number with DSL/ADSL service will need to be connected to additional DSL/
ADSL filters, otherwise you will experience noise when making voice calls.
2. Using the phone cord supplied in the box with the device, connect one end to the
DSL/ADSL filter, then connect the other end to the port labeled 1-LINE on the back
of the device.
NOTE: If you do not use the supplied cord to connect from the DSL/ADSL
filter to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
3. Connect the DSL/ADSL filter to the splitter.
4. Unplug the answering machine from the telephone wall jack, and connect it to the
port labeled 2-EXT on the back of the device.
NOTE: If you do not connect your answering machine directly to the device,
fax tones from a sending fax machine might be recorded on your answering
machine, and you probably will not be able to receive faxes with the device.
5. Connect the DSL modem to the parallel splitter.
6. Connect the parallel splitter to the wall jack.
7. Set your answering machine to answer after a low number of rings.
103
Set up faxing for the device
Chapter 8
8. Change your Rings to Answer setting on the device to the maximum number of
rings supported by the device.
NOTE: The maximum number of rings varies by country/region.
9. Run a fax test.
When the phone rings, your answering machine will answer after the number of rings
you have set, and then play your recorded greeting. The device monitors the call
during this time, “listening” for fax tones. If incoming fax tones are detected, the device
will emit fax reception tones and receive the fax; if there are no fax tones, the device
stops monitoring the line and your answering machine can record a voice message.
If you use the same phone line for telephone, fax, and have a computer DSL modem,
follow these instructions to set up your fax.
Case K: Shared voice/fax line with computer dial-up modem and voice mail
If you receive both voice calls and fax calls at the same phone number, use a
computer dial-up modem on the same phone line, and subscribe to a voice mail
service through your telephone company, set up the device as described in this section.
NOTE: You cannot receive faxes automatically if you have a voice mail service at
the same phone number you use for fax calls. You must receive faxes manually;
this means you must be available to respond in person to incoming fax calls. If you
want to receive faxes automatically instead, contact your telephone company to
subscribe to a distinctive ring service, or to obtain a separate phone line for faxing.
Since your computer dial-up modem shares the phone line with the device, you cannot
use both your modem and the device simultaneously. For example, you cannot use
the device for faxing if you are using your computer dial-up modem to send an e-mail
or access the Internet.
There are two different ways to set up the device with your computer based on the
number of phone ports on your computer. Before you begin, check your computer to
see if it has one or two phone ports.
•
If your computer has only one phone port, you will need to purchase a parallel
splitter (also called a coupler), as shown below. (A parallel splitter has one RJ-11
port on the front and two RJ-11 ports on the back. Do not use a two-line phone
splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front
and a plug on the back.)
Figure 8-12 Example of a parallel splitter
104
Configure and manage
•
If your computer has two phone ports, set up the device as described below.
Figure 8-13 Back view of the device
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to
the 1-LINE port
3
4
5
Parallel splitter
Computer with modem
Telephone
To set up the device on the same phone line as a computer with two phone ports
1. Remove the white plug from the port labeled 2-EXT on the back of the device.
2. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the device.
3. Connect a phone to the "OUT" port on the back of your computer dial-up modem.
4. Using the phone cord supplied in the box with the device, connect one end to your
telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.
NOTE: If you do not use the supplied cord to connect from the telephone wall
jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.
5. If your modem software is set to receive faxes to your computer automatically, turn
off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the device will not be able to receive faxes.
6. Turn off the Auto Answer setting.
7. Run a fax test.
105
Set up faxing for the device
Chapter 8
You must be available to respond in person to incoming fax calls, or the device cannot
receive faxes.
Serial-type fax setup
For information on setting up the device for faxing using a serial-type phone system,
see the Fax Configuration Web site for your country/region.
Austria
Germany
Switzerland (French)
Switzerland (German)
United Kingdom
Finland
Denmark
Sweden
Norway
Netherlands
Belgium (Dutch)
Belguim (French)
Portugal
Spain
France
Ireland
Italy
Configure the device (Windows)
NOTE: Microsoft Internet Explorer 6.0 or higher must be installed on the
computer system to run the installation program.
In addition, you must have administrator privileges to install a printer driver on
Windows 2000, Windows XP, or Windows Vista.
When setting up the device, HP recommends that you connect it after you install the
software because the installation program is designed to provide you with the easiest
setup experience. However, if you have connected the cable first, see Connect the
This section contains the following topics:
•
•
106
Configure and manage
Direct connection
You can connect the device directly to your computer using a USB cable.
NOTE: If you install the device software and connect the device to a computer
running Windows, you can connect additional devices to the same computer with
USB cables without reinstalling the device software.
When setting up the device, HP recommends that you connect the device after you
install the software because the installation program is designed to provide you with
the easiest setup experience. However, if you have connected the cable first, see
This section contains the following topics:
•
•
•
Install the software before connecting the device (recommended)
To install the software
1. Close any applications that are running.
2. Insert the Starter CD into the CD drive. The CD menu runs automatically. If the CD
menu does not start automatically, double-click the setup icon on the Starter CD.
3. On the CD menu, click Install and follow the onscreen instructions.
4. When prompted, turn on the device and connect it to the computer using a USB
cable. The Found New Hardware wizard appears on the computer screen, and
the device icon is created in the Printers folder.
NOTE: You may connect the USB cable at a later time when you need to use the
device.
You can also share the device with other computers using a simple form of
Connect the device before installing the software
If you connected the device to the computer before installing the device software, the
Found New Hardware wizard displays on the computer screen.
NOTE: If you turned on the device, do not turn it off or unplug the cable from the
device while the installation program is running. If you do so, the installation
program will not finish.
107
Configure the device (Windows)
Chapter 8
To connect the device
1. In the Found New Hardware dialog box that displays methods for locating the
printer driver, select the Advanced option, and then click Next.
NOTE: Do not allow the Found New Hardware wizard to perform an
automatic search for the printer driver.
2. Select the check box for specifying the driver location, and ensure that the other
check boxes are clear.
3. Insert the Starter CD into the CD drive. If the CD menu appears, close it.
4. Browse to locate the root directory on the Starter CD (for example, D), and then
click OK.
5. Click Next and follow the onscreen instructions.
6. Click Finish to close the Found New Hardware wizard. The wizard automatically
starts the installation program (this might take a short while).
7. Complete the installation process.
NOTE: You can also share the device with other computers using a simple form
of networking known as locally shared networking. For more information, see
Share the device on a locally shared network
In a locally shared network, the device is connected directly to the USB connector of a
selected computer (known as the server) and is shared by other computers (clients).
NOTE: When sharing a directly connected device, use the computer with the
newest operating system as the server. For example, if you have a computer
running Windows XP and another computer running an older version of Windows,
use the computer running Windows XP as the server.
Use this configuration only in small groups or when usage is low. The connected
computer is slowed down when many users print to the device.
Only the printing function is shared. Scan and Copy functions are not shared.
To share the device
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Right-click the device icon, click Properties, and then click the Sharing tab.
3. Click the option to share the device, and give it a share name.
4. To share the device with client computers that use other versions of Windows,
click Additional Drivers to install those drivers as a convenience to the users. You
must have the Starter CD in your CD drive.
Network connection
If the device has network capability, it can be shared in a network environment by
connecting it directly to the network. This type of connection offers the ability to
108
Configure and manage
manage the device using the embedded Web server from any computer on the
network.
NOTE: Microsoft Internet Explorer 6.0, or higher, must be installed on the
computer system to run the installation program.
Choose the installation option for the type of network you have:
•
Client/server network: If your network has a computer acting as a dedicated print
server, install the device software on the server, and then install the device
software on the client computers. For more information see To install the device on
does not allow you to share the full functionality of the device. Client computers
can only print from the device.
•
Peer-to-peer network: If you have a peer-to-peer network (a network without a
dedicated print server), install the software on the computers that will be using the
In addition, you can connect to a network printer on both types of networks using the
This section contains the following topics:
•
•
•
To install the device on a network
Use the following steps to install the device software in the following networking
scenarios:
You have a peer-to-peer network (a network without a dedicated print server)
1. Remove the protective cover from the device's network port and connect the
device to the network.
2. Insert the Starter CD into the CD drive. The CD menu starts automatically. If the
CD menu does not start automatically, browse to the CD drive of the computer and
double-click Setup.exe.
3. On the CD menu, click Install, and then follow the onscreen instructions.
4. On the Connection Type screen, select Wired network/Wireless, and then click
Next.
5. Follow the onscreen instructions to complete the installation.
To install the device software on client computers
After printer drivers are installed on the computer that is acting as the print server, the
printing functionality can be shared. Individual Windows users who want to use the
network device must install the software on their computers (clients).
109
Configure the device (Windows)
Chapter 8
A client computer can connect to the device in the following ways:
•
In the Printers folder, double-click the Add Printer icon and follow the instructions
for a network installation. For more information, see To install the printer driver
•
•
On the network, browse to the device and drag it to your Printers folder.
Add the device and install the software from the INF file on your network. On the
Starter CD, the INF files are stored in the root directory of the CD.
To install the printer driver using Add Printer
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Double-click Add Printer, and then click Next.
3. Select Network Printer or Network Printer Server.
4. Click Next.
5. Do one of the following:
Type in the network path or queue name of the shared device, and then click Next.
Click Have Disk when prompted to select the device model.
Click Next and locate the device in the list of shared printers.
6. Click Next and follow the onscreen instructions to complete the installation.
Configure the device (Mac OS)
You can use the device with a single Macintosh computer using a USB cable, or you
can share it among other users on a network.
This section contains the following topics:
•
•
Install the software for network or direct connection
To install the software for a direct connection
1. Connect the device to your computer with a USB cable.
2. Insert the Starter CD into the CD drive. Double-click the CD icon on the desktop,
and then double-click the setup icon. Also, you can locate the Installer folder on
the Starter CD.
3. Click Install Software and follow the onscreen instructions.
4. If necessary, share the device with other Macintosh computer users.
•
Direct connection: Share the device with the other Macintosh computer
•
Network connection: Individual Macintosh computer users who want to use
the device on the network must install the device software on their computers.
110
Configure and manage
To install the software for a network connection
1. Remove the protective cover from the device's network port and connect the
device to the network.
2. Insert the Starter CD into the CD drive. The CD menu starts automatically. If the
CD menu does not start automatically, double-click the CD on the desktop.
3. On the CD menu, click Install, and then follow the onscreen instructions.
4. On the Connection Type screen, select Wired network/Wireless, and then click
Next.
5. Follow the onscreen instructions to complete the installation.
Share the device on a locally shared network
When you connect the device directly, you can share it with other computers using a
simple form of networking known as Printer Sharing. Use this Printer Sharing only in
small groups or when usage is low. The connected computer is slowed down when
many users print to the device.
Basic requirements for sharing in the Mac OS environment include the following items:
•
•
•
The Macintosh computers must be communicating on the network using TCP/IP,
and they must have IP addresses. (AppleTalk is not supported.)
The device that is being shared must be connected to a built-in USB port on the
host Macintosh computer.
Both the host Macintosh computer and the client Macintosh computers that are
using the shared device must have the driver or PPD for the device that is
installed. (You can run the installation program to install the device sharing
software and associated Help files.)
For more information about USB device sharing, see the support information on the
NOTE: Printer Sharing is supported in Mac OS 10.3 and higher.
To share the device among computers running Mac OS
1. Turn on printer sharing on all Macintosh computers (host and clients) that are
connected to the printer. Depending on the OS version you are using, do one of
the following:
•
Mac OS 10.3: Open System Preferences, click Print & Fax, and then check
the box next to Share my printers with other computers.
•
Mac OS 10.4: Open System Preferences, click Print & Fax, click the Sharing
tab, check the box next to Share these printers with other computers, and
then select the printer to be shared.
2. To print from the other Macintosh computers (the clients) on the network, do the
following:
a. Click File, and then select Page Setup in the document you want to print.
b. In the drop-down menu next to Format for, select Shared Printers, and then
select your device.
c. Select the Paper Size, and then click OK.
d. In the document, click File, and then select Print.
111
Configure the device (Mac OS)
Chapter 8
e. From the drop-down menu next to Printer, select Shared Printers, and then
select your device.
f. Make additional settings, if necessary, and then click Print.
Set up the device for wireless communication
You may set up the device for wireless communication using one of the following ways:
Setup method
Infrastructure
wireless
Ad hoc wireless
communication*
communication
USB cable
For more information, see To set up the device on
Device control panel
* An ad hoc network can be set up using the Wireless Connection Utility on the Starter
CD.
To use the device with any wireless connection, you must run the installation
program at least once from the Starter CD and create a wireless connection.
Make sure the device is not connected to the network using a network cable.
The sending device must have built-in 802.11 capabilities or an 802.11 wireless
card installed.
The device and the computers that use it must be on the same subnet.
Before installing the device software, you may wish to find out the settings of your
network. Obtain the information from your system administrators, or complete the
following tasks:
•
Obtain your network's network name or Service Set Identifier (SSID) and
communication mode (infrastructure or ad hoc) from the configuration utility for the
network's wireless access point (WAP) or the computer's network card.
•
•
Find out the type of encryption your network uses, such as Wired Equivalent
Privacy (WEP).
Find out the security password or encryption key of the wireless device.
This section contains the following topics:
•
•
•
•
•
112
Configure and manage
•
•
Understand 802.11 wireless network settings
Network name (SSID)
By default, the device looks for the wireless network name or SSID named "hpsetup."
Your network may have a different SSID.
Communication mode
There are two communication mode options:
•
Ad hoc: On an ad hoc network, the device is set to ad hoc communication mode
and communicates directly with other wireless devices without the use of a WAP.
All devices on the ad hoc network must:
◦
◦
◦
◦
◦
Be 802.11 compatible
Have ad hoc as the communication mode
Have the same network name (SSID)
Be on the same subnet and same channel
Have the same 802.11 security settings
•
Infrastructure (recommended): On an infrastructure network, the device is set to
infrastructure communication mode and communicates with other devices on the
network, whether the devices are wired or wireless, through a WAP. WAPs
commonly act as routers or gateways on small networks.
Security settings
For more information on wireless security, visit www.weca.net/opensection/pdf/
•
Network authentication: The device's factory default setting is 'Open,' which
does not require security for authorization or encryption. The other possible values
are 'OpenThenShared,' 'Shared,' and 'WPA-PSK' (Wi-Fi® Protected Access Pre-
Shared Key).
WPA increases the level of over-the-air data protection and access control on
existing and future Wi-Fi networks. It addresses all known weaknesses of WEP,
the original native security mechanism in the 802.11 standard.
113
Set up the device for wireless communication
Chapter 8
WPA2 is the second generation of WPA security; it provides enterprise and
consumer Wi-Fi users with a high level of assurance that only authorized users
can access their wireless networks.
•
Data encryption:
◦
Wired Equivalent Privacy (WEP) provides security by encrypting data sent over
radio waves from one wireless device to another wireless device. Devices on a
WEP-enabled network use WEP keys to encode data. If your network uses
WEP, you must know the WEP key(s) it uses.
◦
◦
WPA uses the Temporal Key Integrity Protocol (TKIP) for encryption and
employs 802.1X authentication with one of the standard Extensible
Authentication Protocol (EAP) types available today.
WPA2 provides a new encryption scheme, the Advanced Encryption Standard
(AES). AES is defined in counter cipher-block chaining mode (CCM) and
supports the Independent Basic Service Set (IBSS) to enable security between
client workstations operating in ad hoc mode.
To set up wireless communication using the device control panel with wireless
setup wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless
connection to your device.
NOTE: To use this method, you must have a wireless network set up and running.
1. Set up the device hardware (see the getting started guide or the setup poster that
came with your device).
2. On the device control panel, press the Setup button.
3. Press an arrow button to move to Network, and then press OK.
4. Press an arrow button to move to Wizard, and then press OK.
5. Follow the display instructions to complete the setup.
To set up wireless communication using the installer (Windows)
For this method, you will need to have a network set up and running.
1. Set up the device hardware (see the setup poster).
2. Remove the protective cover from the device's network port.
3. Close any applications that are running on your computer system.
4. Insert the Starter CD into the CD drive. The CD menu runs automatically. If the CD
menu does not start automatically, double-click the setup icon on the Starter CD.
5. On the CD menu, click Install and follow the onscreen instructions.
6. On the Connection Type screen, select Wireless, and then click Next.
NOTE: If the device cannot be found, you will have the option to temporarily
use a network cable to communicate with the device and configure its wireless
settings.
114
Configure and manage
Complete the following steps to temporarily connect the device to your
computer network if you are unable to establish wireless communication.
a. Temporarily connect the device to the network with a USB cable.
b. Follow the onscreen instructions and disconnect the cable when prompted.
7. On the Select a Network Name (SSID) screen, click Select a detected Wireless
Network Name (SSID) to select the wireless network, or click Specify a wireless
network to enter a new network name.
8. If you chose to enter a new network name, enter it on the device control panel, and
then press Done.
NOTE: If the SSID that you entered is not found, you will be asked to provide
security information. If the network does not use encryption, setup will attempt
to verify the SSID before continuing.
9. If the device cannot connect to the network name, supply the appropriate WEP key
or WPA passphrase on the keypad when prompted, and then press Done.
NOTE: Be sure to unplug the USB cable when you are done.
To set up the device on a wireless network (Mac OS)
1. Set up the device hardware (see the setup poster).
2. Ensure an AirPort card is installed on the computer.
3. Close any applications that are running on your computer system.
4. Open the AirPort Setup Assistant from the Utilities folder. Refer to the AirPort
documentation for details on setting up on wireless networks.
5. For ad hoc networks, click the AirPort icon on the menu bar and select "hpsetup"
under Computer to Computer Networks. For wireless networks, click the AirPort
icon, and then click Other to join the network.
6. Insert the Starter CD into the CD drive. The CD menu runs automatically. If the CD
menu does not start automatically, double-click the setup icon on the Starter CD.
7. On the CD menu, click Install Software and follow the onscreen instructions.
8. On the Connection Type screen, select the wireless network option, and then
click Done.
9. Follow the onscreen instructions in the Network Printer Setup Utility, which starts
running automatically, to install the printer driver.
To turn off wireless communication
•
Device control panel: Press Setup, then select Network Menu, then select
Wireless Radio, and then select either On or Off.
•
Press the wireless button on the front of the device.
115
Set up the device for wireless communication
Chapter 8
Guidelines for reducing interference on a wireless network
The following tips will help reduce the chances for interference in a wireless network:
•
Keep the wireless devices away from large metal objects, such as filing cabinets,
and other electromagnetic devices, such as microwaves and cordless telephones,
as these objects can disrupt radio signals.
•
•
•
Keep the wireless devices away from large masonry structures and other building
structures as these objects can absorb radio waves and lower signal strength.
For an infrastructure network, position the WAP in a central location in line of sight
with the wireless devices on the network.
Keep all wireless devices on the network within range of one another.
Guidelines for ensuring wireless network security
This section contains the following topics:
•
•
To add hardware addresses to a WAP
MAC filtering is a security feature in which a WAP is configured with a list of MAC
addresses (also called "hardware addresses") of devices that are allowed to gain
access to the network through the WAP.
If the WAP does not have the hardware address of a device attempting to access the
network, the WAP denies the device access to the network.
If the WAP filters MAC addresses, then the device's MAC address must be added to
the WAP's list of accepted MAC addresses.
1. Print the network configuration page. For information on the network configuration
2. Open the WAP's configuration utility, and add the device's hardware address to the
list of accepted MAC addresses.
Other guidelines
To keep the wireless network secure, follow these guidelines:
•
Use a password with at least 20 random characters. You can use up to 63
characters in a WPA password.
•
Avoid any common words or phrases, easy sequences of characters (such as all
1s), and personally-identifiable information for passwords. Always use random
strings composed of uppercase and lowercase letters, numbers, and if allowed,
special characters such as punctuation.
•
•
Change the password periodically.
Change the default password provided by the manufacturer for administrator
access to the access point or wireless router. Some routers let you change the
administrator name as well.
•
Place the access point or router in the center of a room and not near a window.
116
Configure and manage
•
•
Turn off administrative access over wireless if possible. If you do this, you need to
connect to the router with a wired Ethernet connection when you want to make
configuration changes.
Turn off remote administrative access over the Internet on your router, if possible.
You can use Remote Desktop to make an encrypted connection to a computer
running behind your router and make configuration changes from the local
computer you are accessing over the Internet.
•
To avoid accidentally connecting to another party's wireless network, turn off the
setting to automatically connect to non-preferred networks. This is disabled by
default in Windows XP.
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer
before prompted by the software installation screen, you might need to uninstall and
then reinstall the software. Do not simply delete the device application files from your
computer. Make sure to remove them properly using the uninstall utility provided when
you installed the software that came with the device.
There are three methods to uninstall the software on a Windows computer, and one
method to uninstall on a Macintosh computer.
To uninstall from a Windows computer, method 1
1. Disconnect the device from your computer. Do not connect it to your computer until
after you have reinstalled the software.
2. Press the Power button to turn off the device.
3. On the Windows taskbar, click Start, select Programs or All Programs, select
HP, select Officejet J6400 Series, and then click Uninstall.
4. Follow the onscreen instructions.
5. If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work properly if the files are deleted.
6. Restart your computer.
7. To reinstall the software, insert the device Starter CD into your computer's CD-
ROM drive, follow the onscreen instructions, and also see Install the software
8. After the software is installed, connect the device to your computer.
9. Press the Power button to turn the device on.
After connecting and turning on the device, you might have to wait several minutes
for all of the Plug and Play events to complete.
10. Follow the onscreen instructions.
When the software installation is complete, the HP Digital Imaging Monitor icon
appears in the Windows system tray.
To uninstall from a Windows computer, method 2
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
Uninstall and reinstall the software
117
Chapter 8
1. On the Windows taskbar, click Start, select Settings, select Control Panel, and
then click Add/Remove Programs.
- Or -
Click Start, click Control Panel, and then double-click Programs and Features.
2. Select HP Officejet Pro All-in-One Series, and then click Change/Remove or
Uninstall/Change.
Follow the onscreen instructions.
3. Disconnect the device from your computer.
4. Restart your computer.
NOTE: It is important that you disconnect the device before restarting your
computer. Do not connect the device to your computer until after you have
reinstalled the software.
5. Insert the device Starter CD into your computer's CD-ROM drive and then start the
Setup program.
To uninstall from a Windows computer, method 3
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1. Insert the device Starter CD into your computer's CD-ROM drive, and then start
the Setup program.
2. Disconnect the device from your computer.
3. Select Uninstall and follow the onscreen directions.
4. Restart your computer.
NOTE: It is important that you disconnect the device before restarting your
computer. Do not connect the device to your computer until after you have
reinstalled the software.
5. Start the Setup program for the device again.
6. Select Install.
To uninstall from a Macintosh computer
1. Launch HP Device Manager.
2. Click Information and Settings.
3. Select Uninstall HP AiO Software from the pull-down menu.
Follow the onscreen instructions.
4. After the software is uninstalled, restart your computer.
5. To reinstall the software, insert the device Starter CD into your computer's CD-
ROM drive.
118
Configure and manage
6. On the desktop, open the CD-ROM, and then double-click HP All-in-One Installer.
Uninstall and reinstall the software
119
9 Maintain and troubleshoot
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Work with print cartridges
This section contains the following topics:
•
•
•
•
•
•
•
•
Supported print cartridges
The availability of print cartridges varies by country/region. The print cartridges might
come in different sizes.
You can find the print cartridge number in the following places:
•
•
On the label of the print cartridge you are replacing.
Windows: From the Toolbox, if you have bidirectional communication, click the
Estimated Ink Levels tab, scroll to display the Cartridge Details button, and then
click Cartridge Details.
•
Mac OS: From the HP Printer Utility, click Supply Info from the Information and
Support panel, and then click Retail Supplies Information.
120
Maintain and troubleshoot
Handle the print cartridges
Before you replace or clean a print cartridge, you should know the part names and
how to handle the print cartridges.
1
2
3
Copper-colored contacts
Plastic tape with pink pull tab (must be removed before installing)
Ink nozzles under tape
Hold the print cartridges by their black plastic sides, with the label on top. Do not touch
the copper-colored contacts or the ink nozzles.
NOTE: Handle the print cartridges carefully. Dropping or jarring cartridges can
cause temporary printing problems, or even permanent damage.
Replace the print cartridges
Follow these instructions when the ink level is low.
NOTE: When the ink level for a print cartridge is low, a message appears on the
display. You can also check the ink levels by using the printer Toolbox (Windows)
or the HP Printer Utility (Mac OS).
NOTE: Ink from the cartridges is used in the printing process in a number of
different ways, including in the initialization process, which prepares the device and
cartridges for printing. In addition, some residual ink is left in the cartridge after it is
Ink level warnings and indicators provide estimates for planning purposes only. When
you receive a low-ink warning message, consider having a replacement cartridge
Work with print cartridges
121
Chapter 9
available to avoid possible printing delays. You do not need to replace the print
cartridges until print quality becomes unacceptable.
choose your country/region, follow the prompts to select your product, and then click
one of the shopping links on the page.
To replace the print cartridges
1. Make sure the device is on.
CAUTION: If the device is off when you open the print cartridge door to
access the print cartridges, the device will not release the cartridges for
changing. You might damage the device if the print cartridges are not docked
safely when you try to remove them.
2. Open the print cartridge door.
The print carriage moves to the far right side of the device.
3. Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black, photo, or gray photo print cartridge, remove the print
cartridge from the slot on the right.
4. Pull the print cartridge toward you out of its slot.
122
Maintain and troubleshoot
5. If you are removing the black print cartridge in order to install the photo or gray
photo print cartridge, store the black print cartridge in the print cartridge protector
or an airtight plastic container.
6. Remove the new print cartridge from its packaging and, being careful to touch only
the black plastic, gently remove the plastic tape by using the pink pull tab.
1
2
3
Copper-colored contacts
Plastic tape with pink pull tab (must be removed before installing)
Ink nozzles under tape
CAUTION: Do not touch the copper-colored contacts or ink nozzles. Also, do
not re-tape the print cartridges. Doing so can result in clogs, ink failure, and
bad electrical connections.
7. Hold the print cartridge with the HP logo on top, and insert the new print cartridge
into the empty cartridge slot. Make sure you push the print cartridge in firmly until it
snaps into place.
If you are installing the tri-color print cartridge, slide it into the left slot.
Work with print cartridges
123
Chapter 9
If you are installing a black, photo, or gray photo print cartridge, slide it into the
right slot.
8. Close the print cartridge door.
If you installed a new print cartridge, the device prints a print cartridge alignment
page.
9. When prompted, ensure plain white paper is loaded in the input tray, then press OK.
10. The device prints a test page, aligns the print head, and calibrates the printer.
Recycle or discard the page.
A success or failure message appears.
NOTE: If you have colored paper loaded in the input tray when you align the
printer, the alignment will fail. Load unused plain white paper into the input tray,
and then try the alignment again.
11. Press OK to continue.
Align the print cartridges
The HP All-in-One prompts you to align cartridges every time you install or replace a
print cartridge. You can also align the print cartridges at any time from the device
control panel or by using the software you installed with the device. Aligning the print
cartridges ensures high-quality output.
NOTE: If you remove and reinstall the same print cartridge, the device will not
prompt you to align the print cartridges. It remembers the alignment values for that
print cartridge, so you do not need to realign the print cartridges.
124
Maintain and troubleshoot
To align the print cartridges from the device control panel when prompted
1. Make sure you have letter or A4 unused plain white paper loaded in the input tray,
and then press OK.
2. The device prints a test page and calibrates the printer. Recycle or discard the
page.
NOTE: If you have colored paper loaded in the input tray when you align the
print cartridges, the alignment will fail. Load unused plain white paper into the
input tray, and then try the alignment again.
If the alignment fails again, you might have a defective sensor or print
choose your country/region, and then click Contact HP for information on
calling for technical support.
To align the cartridges from the device control panel at any time
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. Press Setup.
3. Selects Tools and then select Align Print Cartridge.
4. The device prints a test page and calibrates the printer. Recycle or discard the
page.
To align the print cartridges from the HP Photosmart Software (Windows)
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties
dialog box. In the Print Properties dialog box, click the Services tab, and then
click Service this device.
The Printer Toolbox appears.
3. Click the Device Services tab.
4. Click Align the Print Cartridges.
The device prints a test page and calibrates the printer. Recycle or discard the
page.
To align the print cartridges from the HP Photosmart Studio Software (Mac OS)
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. HP Printer Utility (Mac OS): Open the HP Printer Utility. For more information,
Clean the print cartridges
Use this feature when there is streaking, white lines through any of the lines of color or
when a color is muddy. Do not clean print cartridges unnecessarily, as this wastes ink
and shortens the life of the ink nozzles.
Work with print cartridges
125
Chapter 9
To clean the print cartridges from the device control panel
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. Press Setup.
3. Press 6, then press 1.
This selects Tools and then selects Clean Print Cartridge.
The device prints a page that you can recycle or discard.
If copy or print quality still seems poor after you clean the print cartridges, try
cleaning the print cartridge contacts before replacing the affected print cartridge.
To clean the print cartridges from the HP Photosmart Software
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties
dialog box. In the Print Properties dialog box, click the Services tab, and then
click Service this device.
The Printer Toolbox appears.
3. Click the Device Services tab.
4. Click Clean the Print Cartridges.
5. Follow the prompts until you are satisfied with the quality of the output, and then
click Done.
If copy or print quality still seems poor after you clean the print cartridges, try
cleaning the print cartridge contacts before replacing the affected print cartridge.
HP Printer Utility (Mac OS)
2. Click Clean and follow the onscreen instructions.
Clean the print cartridge contacts
Clean the print cartridge contacts only if you get repeated messages on the display
prompting you to check a print cartridge after you already have cleaned or aligned the
print cartridges.
Before cleaning the print cartridge contacts, remove the print cartridge and verify that
nothing is covering the print cartridge contacts, then reinstall the print cartridge. If you
continue to get messages to check the print cartridges, clean the print cartridge
contacts.
126
Maintain and troubleshoot
Make sure you have the following materials available:
•
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning print cartridges.
•
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge
contacts. These can damage the print cartridge or the HP All-in-One.
To clean the print cartridge contacts
1. Turn on the device and open the print cartridge door.
The print carriage moves to the far right side of the device.
2. Wait until the print carriage is idle and silent, and then unplug the power cord from
the back of the device.
NOTE: Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later, when
you plug the power cord back in.
3. Lightly press down on the print cartridge to release it, and then pull it toward you
out of the slot.
4. Inspect the print cartridge contacts for ink and debris buildup.
5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze
any excess water from it.
6. Hold the print cartridge by its sides.
7. Clean only the copper-colored contacts. Allow the print cartridges to dry for
approximately ten minutes.
1
2
Copper-colored contacts
Ink nozzles (do not clean)
Work with print cartridges
127
Chapter 9
8. Slide the print cartridge back into the slot. Push the print cartridge forward until it
clicks into place.
9. Repeat if necessary for the other print cartridge.
10. Gently close the print cartridge door and plug the power cord into the back of the
device.
Clean the area around the ink nozzles
If the device is used in a dusty environment, a small amount of debris might
accumulate inside the device. This debris can include dust, hair, carpet, or clothing
fibers. When debris gets on the print cartridges, it can cause ink streaks and smudges
on printed pages. Ink streaking can be corrected by cleaning around the ink nozzles
as described here.
NOTE: Clean the area around the ink nozzles only if you continue to see streaks
and smudges on your printed pages after you have already cleaned the print
cartridges by using the device control panel or the software you installed with the
HP All-in-One.
Make sure you have the following materials available:
•
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning print cartridges.
•
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
CAUTION: Do not touch the copper-colored contacts or ink nozzles. Touching
these parts can result in clogs, ink failure, and bad electrical connections.
To clean the area around the ink nozzles
1. Turn on the device and open the print cartridge door.
The print carriage moves to the far right side of the device.
2. Wait until the print carriage is idle and silent, and then unplug the power cord from
the back of the device.
NOTE: Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later, when
you plug the power cord back in.
3. Lightly press down on the print cartridge to release it, and then pull it toward you
out of the slot.
NOTE: Do not remove both print cartridges at the same time. Remove and
clean each print cartridge one at a time. Do not leave a print cartridge outside
the device for more than 30 minutes.
4. Place the print cartridge on a piece of paper with the ink nozzles facing up.
5. Lightly moisten a clean foam rubber swab with distilled water.
128
Maintain and troubleshoot
6. Clean the face and edges around the ink nozzle area with the swab, as shown
below.
1
2
Nozzle plate (do not clean)
Face and edges around the ink nozzle area
CAUTION: Do not clean the nozzle plate.
7. Slide the print cartridge back into the slot. Push the print cartridge forward until it
clicks into place.
8. Repeat if necessary for the other print cartridge.
9. Gently close the print cartridge door and plug the power cord into the back of the
device.
Store printing supplies
The print cartridge protector is designed to keep a print cartridge secure and prevent it
from drying out when it is not being used. Whenever you remove a print cartridge from
the device with the intention of using it again later, store it in the print cartridge
protector. For example, store the black print cartridge in a print cartridge protector if
you are removing it so you can print high-quality photos with the photo and tri-color
print cartridges.
NOTE: If you do not have a print cartridge protector, you can order one from HP
tight container, such as a plastic tub. Make sure the nozzles are not touching
anything when you store the print cartridges.
Work with print cartridges
129
Chapter 9
To insert a print cartridge into the print cartridge protector
▲ Place the print cartridge into the print cartridge protector at a slight angle and snap
it securely into place.
To remove the print cartridge from the print cartridge protector
▲ Press down on the top of the print cartridge protector to release the print cartridge,
then gently remove the print cartridge out of the print cartridge protector.
Clean the device
This section provides instructions for keeping the device in top working condition.
Perform these maintenance procedures as necessary.
Dust or dirt on the scanner glass, scanner lid backing, or scanner frame can slow
down performance, degrade the quality of scans, and affect the accuracy of special
features such as fitting copies to a certain page size.
This section contains the following topics:
•
•
•
130
Maintain and troubleshoot
Clean the scanner glass
To clean the scanner glass
1. Turn off the device.
2. Lift the scanner lid.
3. Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild
glass cleaner. Dry the glass with a dry, soft, lint-free cloth.
CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners
that contain abrasives, acetone, benzene, and carbon tetrachloride, all of which
can damage the scanner glass. Avoid isopropyl alcohol because it can leave
streaks on the glass.
CAUTION: Do not spray the glass cleaner directly on the glass. If too much
glass cleaner is applied, the cleaner could leak under the glass and damage
the scanner.
4. Close the scanner lid, and turn on the device.
Clean the exterior
NOTE: Before cleaning the device, turn off the power and unplug the power cord
from the electrical socket.
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case. The
exterior of the device does not require cleaning. Keep fluids away from the interior of
the device, as well as from the device control panel.
Clean the automatic document feeder
If the automatic document feeder picks up multiple pages or if it does not pick up plain
paper, you can clean the rollers and separator pad. Lift the automatic document feeder
131
Clean the device
Chapter 9
cover to access the pick assembly inside the automatic document feeder, clean the
rollers or separator pad, and then close the cover.
To clean the rollers or separator pad
1. Remove all originals from the document feeder tray.
2. Lift the automatic document feeder cover (1).
This provides easy access to the rollers (2) and separator pad (3), as shown below.
1
2
3
Automatic document feeder cover
Rollers
Separator pad
3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess
liquid from the cloth.
4. Use the damp cloth to wipe any residue off the rollers or separator pad.
NOTE: If the residue does not come off using distilled water, try using
isopropyl (rubbing) alcohol.
5. Close the cover of the automatic document feeder.
132
Maintain and troubleshoot
To clean the glass strip inside the automatic document feeder
1. Turn off the HP All-in-One, and unplug the power cord.
NOTE: Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later, when
you plug the power cord back in.
2. Raise the lid, as if you were loading an original on the glass.
3. Lift the cover of the automatic document feeder.
133
Clean the device
Chapter 9
4. Lift the automatic document feeder mechanism.
There is a glass strip under the automatic document feeder.
5. Clean the glass strip with a soft cloth or sponge slightly moistened with a
nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride
on the glass, since they can damage it. Do not place or spray liquid directly on
the glass. The liquid might seep under the glass and damage the device.
6. Lower the automatic document feeder mechanism, and then close the cover of the
automatic document feeder.
7. Close the lid.
8. Plug in the power cord, and then turn on the HP All-in-One.
General troubleshooting tips and resources
Try these when you begin troubleshooting a printing problem.
•
•
For paper-feed problems, such as the paper skew and paper pick, see Solve
•
Power light is on and not blinking. When the device is turned on for the first time, it
takes approximately 12 minutes to initialize it after the print cartridges are installed.
134
Maintain and troubleshoot
•
Power cord and other cables are working, and are firmly connected to the device.
Make sure the device is connected firmly to a functioning alternating current (AC)
power outlet, and is turned on. For voltage requirements, see Electrical
•
•
•
Media is loaded correctly in the input tray and is not jammed in the device.
All packing tapes and materials are removed.
The device is set as the current or default printer. For Windows, set it as the
default in the Printers folder. For the Mac OS, set it as the default in the Printer
Setup Utility. See your computer's documentation for more information.
•
•
Pause Printing is not selected if you are using a computer running Windows.
You are not running too many programs when you are performing a task. Close
programs that you are not using or restart the computer before attempting the task
again.
Troubleshooting topics
•
•
•
•
•
•
•
•
•
•
Solve printing problems
This section contains the following topics:
•
•
•
•
•
•
•
•
The device shuts down unexpectedly
Check the power and power connections
Make sure the device is connected firmly to a functioning alternating current (AC)
135
Solve printing problems
Chapter 9
Error message appears on control-panel display
A non-recoverable error has occurred
Disconnect all cables (such as power cord and USB cable), wait about 20 seconds,
and reconnect the cables. If the problem persists, visit the HP Web site (www.hp.com/
support) for the latest troubleshooting information, or product fixes and updates.
The device is not responding (nothing prints)
There are print jobs stuck in the print queue
Open the print queue, cancel all documents, and then reboot the computer. Try to print
after the computer reboots. Refer to the Help system for the operating system for more
information.
Check the device setup
Check the device software installation
If the device is turned off when printing, an alert message should appear on your
computer screen; otherwise, the device software might not be installed correctly. To
resolve this, uninstall the software completely, and then reinstall the device software.
Check the cable connections
•
•
Make sure both ends of the network/USB cable are secure.
If the device is connected to a network, check the following:
◦
◦
Check the Link light on the back of the device.
Make sure you are not using a phone cord to connect the device.
Check any personal firewall software installed on the computer
The personal software firewall is a security program that protects a computer from
intrusion. However, the firewall might block communication between the computer and
the device. If there is a problem communicating with the device, try temporarily
disabling the firewall. If the problem persists, the firewall is not the source of the
communication problem. Re-enable the firewall.
Device takes a long time to print
Check the system configuration and resources
Make sure the computer meets the minimum system requirements for the device. For
136
Maintain and troubleshoot
Check the device software settings
Print speed is slower when Best or Maximum dpi is selected as the print quality. To
increase the print speed, select different print settings in the device driver. For more
Blank or partial page printed
Clean the print cartridge
Complete the print cartridge cleaning procedure. For more information, see Clean the
Check the media settings
•
Make sure you select the correct print quality settings in the printer driver for the
media loaded in the trays.
•
Make sure the page settings in the printer driver match the page size of media
loaded in the tray.
More than one page is being picked
There is a blank page in the file
Check the file to make sure there is no blank page.
Something on the page is missing or incorrect
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
Check the margin settings
Make sure the margin settings for the document do not exceed the printable area of
Check the color print settings
Make sure Print in Grayscale is not selected in the print driver.
Check the device location and length of USB cable
High electromagnetic fields (such as those generated by USB cables) can sometimes
cause slight distortions to printouts. Move the device away from the source of the
electromagnetic fields. Also, it is recommended that you use a USB cable that is less
than 3 meters (9.8 feet) long to minimize the effects of these electromagnetic fields.
137
Solve printing problems
Chapter 9
Placement of the text or graphics is wrong
Check how the media is loaded
Make sure the media width and length guides fit snugly against the edges of the stack
of media, and make sure the tray is not overloaded. For more information, see Load
Check the media size
•
Content on a page might be cut off if the document size is larger than the media
that you are using.
•
Make sure the media size selected in the printer driver match the size of media
loaded in the tray.
Check the margin settings
If the text or graphics are cut off at the edges of the page, make sure the margin
settings for the document do not exceed the printable area of your device. For more
Check the page-orientation setting
Make sure the media size and page orientation selected in the application match the
Check the device location and length of USB cable
High electromagnetic fields (such as those generated by USB cables) can sometimes
cause slight distortions to printouts. Move the device away from the source of the
electromagnetic fields. Also, it is recommended that you use a USB cable that is less
than 3 meters (9.8 feet) long to minimize the effects of these electromagnetic fields.
If the above solutions do not work, the problem may be caused by the inability of the
application to interpret print settings properly. See the release notes for known
software conflicts, refer to the application's documentation, or contact the software
manufacturer for specific help.
The device prints half a page, then ejects the paper
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Poor print quality and unexpected printouts
This section contains the following topics:
•
•
•
138
Maintain and troubleshoot
•
•
•
•
•
•
•
Common poor quality printout problems
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Check the paper quality
The paper might be too moist or too rough. Make sure the media meets HP
Check the type of media loaded in the device
Make sure the tray supports the type of media you have loaded. For more information,
Check the device location and length of USB cable
High electromagnetic fields (such as those generated by USB cables) can sometimes
cause slight distortions to printouts. Move the device away from the source of the
electromagnetic fields. Also, it is recommended that you use a USB cable that is less
than 3 meters (9.8 feet) long to minimize the effects of these electromagnetic fields.
Align the print cartridges
Clean the print cartridge
The print cartridges may need to be cleaned. For more information, see, Clean the
Meaningless characters print
If an interruption occurs to a job that is printing, the device might not recognize the rest
of the job.
139
Poor print quality and unexpected printouts
Chapter 9
Cancel the print job and wait for the device to return to the ready state. If the device
does not return to the ready state, cancel all jobs and wait again. When the device is
ready, resend the job. If prompted by the computer to retry the job, click Cancel.
Check the cable connections
If the device and computer are connected with a USB cable, the problem may be due
to a poor cable connection.
Make sure the cable connections at both ends are secure. If the problem persists, turn
off the device, disconnect the cable from the device, turn on the device without
connecting the cable, and delete any remaining jobs from the print spooler. When the
Power light is on and not flashing, reconnect the cable.
Check the document file
The document file may be damaged. If you can print other documents from the same
application, try printing a backup copy of your document, if available.
Align the print cartridges
Ink is smearing
Check the print settings
•
When you print documents that use much ink, allow more time to dry before
handling the printouts. This is especially true for transparencies. In the printer
driver, select the Best print quality, and also increase the ink drying time and
reduce the ink saturation using the ink volume under the advanced features
(Windows) or ink features (Mac OS). However, note that decreasing ink saturation
might give printouts a "washed-out" quality.
•
Color documents that have rich, blended colors can wrinkle or smear when printed
using the Best print quality. Try using another print mode, such as Normal, to
reduce ink, or use HP Premium Paper designed for printing vivid color documents.
Check the media type
Some types of media do not accept ink well. For these types of media, ink will dry
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Clean the print cartridge
The print cartridges may need to be cleaned. For more information, see, Clean the
140
Maintain and troubleshoot
Ink is not filling the text or graphics completely
Check the media type
Some media types are not suitable for use with the device. For more information, see
Check the print cartridges
Make sure the print cartridges are not low on ink. For more information, see Work with
HP cannot guarantee the quality of non-HP print cartridges.
Clean the print cartridge
The print cartridges may need to be cleaned. For more information, see, Clean the
Output is faded or dull colored
Check the print mode
The Draft or Fast mode in the printer driver allows you to print at a faster rate, which is
good for printing drafts. To get better results, select Normal or Best. For more
Check the paper type setting
When printing on transparencies or other special media, select the corresponding
media type in the print driver. For more information, see Print on special and custom-
Clean the print cartridge
The print cartridges may need to be cleaned. For more information, see, Clean the
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Colors are printing as black and white
Check the print settings
Make sure Print in Grayscale is not selected in the printer driver. For information on
141
Poor print quality and unexpected printouts
Chapter 9
Wrong colors are printing
Check the print settings
Make sure Print in Grayscale is not selected in the printer driver. For information on
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Clean the print cartridge
The print cartridges may need to be cleaned. For more information, see, Clean the
Printout shows bleeding colors
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Check the print settings
Make sure Print in Grayscale is not selected in the printer driver. For information on
Check the media type
Some types of media do not accept ink well. For these types of media, ink will dry
Colors do not line up properly
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Check the graphics placement
Use the zoom or print preview feature of your software to check for gaps in the
placement of graphics on the page.
Align the print cartridges
142
Maintain and troubleshoot
Lines or dots are missing from text or graphics
Check the print cartridges
Make sure the print cartridges are not low on ink. For more information, see Work with
HP cannot guarantee the quality of non-HP print cartridges.
Solve paper-feed problems
Media is not supported for the printer or tray
Use only media that is supported for the device and the tray being used. For more
Media is not picked up from a tray
•
the media before loading.
•
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
•
•
Make sure media in the tray is not curled. Uncurl paper by bending it in the
opposite direction of the curl.
When using thin special media, make sure that the tray is completely loaded. If you
are using special media that is only available in small quantities, try placing the
special media on top of other paper of the same size to help fill the tray. (Some
media is picked up more easily if the tray is full.)
•
If you are using thick special media (such as brochure paper), load media so that
the tray is between 1/4 and 3/4 full. If necessary, place the media on top
of other paper of the same size so that the stack height is within this range.
Media is not coming out correctly
•
Make sure the output tray extension is extended; otherwise, printed pages may fall
off the device.
143
Solve paper-feed problems
Chapter 9
•
Remove excess media from the output tray. There is a limit to the number of
sheets the tray can hold.
Pages are skewing
•
Make sure the media loaded in the trays is aligned to the paper guides. If needed,
pull out the trays from the device and reload the media properly, making sure that
the paper guides are properly aligned.
•
•
Make sure the duplexer is properly installed.
Load media into the device only when it is not printing.
Multiple pages are being picked up
•
•
Fan the media before loading.
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
•
•
Make sure the tray is not overloaded with paper.
When using thin special media, make sure that the tray is completely loaded. If you
are using special media that is only available in small quantities, try placing the
special media on top of other paper of the same size to help fill the tray. (Some
media is picked up more easily if the tray is full.)
•
•
If you are using thick special media (such as brochure paper), load media so that
the tray is between 1/4 and 3/4 full. If necessary, place the media on top
of other paper of the same size so that the stack height is within this range.
Use HP media for optimum performance and efficiency.
Solve copy problems
support.
•
•
•
•
•
•
•
•
144
Maintain and troubleshoot
No copy came out
•
Check the power
Make sure that the power cord is securely connected, and the device turned on.
•
Check the status of the device
◦
The device might be busy with another job. Check the control-panel display for
information about the status of jobs. Wait for any job that is processing to finish.
◦
•
Check the trays
Copies are blank
•
•
•
Check the media
The media might not meet Hewlett-Packard media specifications (for example, the
Check the settings
The contrast setting might be set too light. Use the Copy button on the device
control panel to create darker copies.
Check the trays
If you are copying from the ADF, make sure that the originals have been loaded
correctly. For more information, see Load an original in the automatic document
Documents are missing or faded
•
Check the media
The media might not meet Hewlett-Packard media specifications (for example, the
•
Check the settings
The quality setting of Fast (which produces draft-quality copies) might be
responsible for the missing or faded documents. Change to the Normal or Best
setting.
•
Check the original
◦
The accuracy of the copy depends on the quality and size of the original. Use
the Copy menu to adjust the brightness of the copy. If the original is too light,
the copy might not be able to compensate, even if you adjust the contrast.
◦
Colored backgrounds might cause images in the foreground to blend into the
background, or the background might appear in a different shade.
Size is reduced
•
The reduce/enlarge or other copy feature might have been set from the device
control panel to reduce the scanned image. Check the settings for the copy job to
make sure that they are for normal size.
•
The HP photo and imaging software settings might be set to reduce the scanned
image. Change the settings, if needed. See the onscreen Help for the HP photo
and imaging software for more information.
145
Solve copy problems
Chapter 9
Copy quality is poor
•
Take steps to improve the copy quality
◦
◦
Use quality originals.
Load the media correctly. If the media is loaded incorrectly, it might skew,
◦
Use or make a carrier sheet to protect your originals.
•
Check the device
◦
◦
The scanner lid might not be closed properly.
The scanner glass or lid backing might need cleaning. See Clean the device
for more information.
◦
Copy defects are apparent
•
Vertical white or faded stripes
The media might not meet Hewlett-Packard media specifications (for example, the
•
•
Too light or dark
Try adjusting the contrast and copy-quality settings.
Unwanted lines
The scanner glass, lid backing, or frame might need cleaning. See Clean the
device for more information.
•
Black dots or streaks
Ink, glue, correction fluid, or an unwanted substance might be on the scanner
information.
•
•
Copy is slanted or skewed
◦
◦
Make sure that the ADF input tray is not too full.
Make sure that the ADF width adjusters are snug against the sides of the media.
Unclear text
◦
◦
Try adjusting the contrast and copy-quality settings.
The default enhancement setting might not be suitable for the job. Check the
setting and change it to enhance text or photographs, if needed. For more
•
•
Incompletely filled text or graphics
Try adjusting the contrast and copy-quality settings.
Large, black typefaces look splotchy (not smooth)
The default enhancement setting might not be suitable for the job. Check the
setting and change it to enhance text or photographs, if needed. For more
•
Horizontal grainy or white bands in light-gray to medium-gray areas
The default enhancement setting might not be suitable for the job. Check the
setting and change it to enhance text or photographs, if needed. For more
146
Maintain and troubleshoot
The device prints half a page, then ejects the paper
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Error messages appear
“Reload document and then reload job”
Press the OK button, and then reload the remaining documents (up to 20 pages) in
Solve scan problems
support.
NOTE: If you are starting the scan from a computer, see the software Help for
troubleshooting information.
•
•
•
•
•
•
•
Scanner did nothing
•
Check the original
Make sure that the original is placed on the scanner glass correctly. For more
•
Check the device
The device might be coming out of PowerSave mode after a period of inactivity,
which delays processing a short while. Wait until the device reaches the READY
state.
147
Solve scan problems
Chapter 9
Scan takes too long
•
Check the settings
◦
If you set the resolution too high, the scan job takes longer and results in larger
files. To obtain good results when scanning or copying, do not use a resolution
that is higher than needed. You can lower the resolution to scan more quickly.
◦
If you acquire an image through TWAIN, you can change the settings so that
the original scans in black and white. See the onscreen Help for the TWAIN
program for information.
•
Check the status of the device
If you sent a print or copy job before you tried to scan, the scan starts if the
scanner is not busy. However, the printing and scanning processes share memory,
which means that the scan might be slower.
Part of the document did not scan or text is missing
•
Check the original
◦
Make sure that you loaded the original correctly. For more information, see
◦
If you scanned the document from the ADF, try scanning the document directly
from the scanner glass. For more information, see Load an original on the
◦
Colored backgrounds can cause images in the foreground to blend into the
background. Try adjusting the settings before you scan the original, or try
enhancing the image after you scan the original.
•
Check the settings
◦
Make sure that the input media size is large enough for the original that you
are scanning.
◦
If you are using the HP photo and imaging software, the default settings in the
HP photo and imaging software might be set to automatically perform a
specific task other than the one that you are attempting. See the onscreen
Help for the HP photo and imaging software for instructions about changing the
properties.
148
Maintain and troubleshoot
Text cannot be edited
•
Check the settings
◦
◦
Make sure that the OCR software is set to edit text.
When you scan the original, make sure that you select a document type that
creates editable text. If text is classified as a graphic, it is not converted to text.
◦
Your OCR program might be linked to a word-processing program that does
not perform OCR tasks. See the product software Help for more information
about linking programs.
•
Check the originals
◦
◦
◦
◦
For OCR, the original must be loaded into the ADF with the top forward and
face-up. Make sure that you loaded the original correctly. For more information,
The OCR program might not recognize text that is tightly spaced. For example,
if the text that the OCR program converts has missing or combined characters,
"rn" might appear as "m."
The accuracy of the OCR program depends on the image quality, text size,
and structure of the original and the quality of the scan itself. Make sure that
your original has good image quality.
Colored backgrounds can cause images in the foreground to blend too much.
Try adjusting the settings before you scan the original, or try enhancing the
image after you scan the original. If you are performing an OCR operation on
an original, any colored text on the original does not scan well, if at all.
Error messages appear
•
"Unable to activate TWAIN source" or "An error occurred while acquiring the
image"
◦
If you are acquiring an image from another device, such as a digital camera or
another scanner, make sure that the other device is TWAIN-compliant. Devices
that are not TWAIN-compliant do not work with the device software.
◦
◦
Make sure that you have connected the USB Device Cable to the correct port
on the back of your computer.
Verify that the correct TWAIN source is selected. In the software, check the
TWAIN source by selecting Select Scanner on the File menu.
•
“Reload document and then restart job”
Press the OK button, and then reload the remaining documents (up to 50 pages)
Scanned image quality is poor
The original is a second-generation photo or picture
Reprinted photographs, such as those in newspapers or magazines, are printed by
using tiny dots of ink that make an interpretation of the original photograph, which
degrades the quality. Often, the ink dots form unwanted patterns that can be detected
when the image is scanned or printed or when the image appears on a screen. If the
149
Solve scan problems
Chapter 9
following suggestions do not solve the problem, you might need to use a better-quality
version of the original.
◦
◦
◦
◦
To eliminate the patterns, try reducing the size of the image after scanning.
Print the scanned image to see if the quality is better.
Make sure that the resolution and color settings are correct for the type of scan job.
For best results, use the flatbed scanner for scanning rather than the ADF.
Text or images on the back of a two-sided original appear in the scan
Two-sided originals can "bleed" text or images from the back side to the scan if the
originals are printed on media that is too thin or too transparent.
The scanned image is skewed (crooked)
The original might have been loaded incorrectly. Be sure to use the media guides
The image quality is better when printed
The image that appears on the screen is not always an accurate representation of the
quality of the scan.
◦
Try adjusting your computer monitor settings to use more colors (or levels of gray).
On Windows computers, you typically make this adjustment by opening Display
on the Windows control panel.
◦
Try adjusting the resolution and color settings.
The scanned image shows blots, lines, vertical white stripes, or other defects
◦
If the scanner glass is dirty, the image produced does not have optimum clarity.
◦
The defects might be on the original and not a result of the scanning process.
Graphics look different from the original
The graphics settings might not be suitable for the type of scan job that you are
performing. Try changing the graphics settings.
Take steps to improve the scan quality
◦
◦
◦
Use the glass to scan rather than the ADF.
Use high-quality originals.
Place the media correctly. If the media is placed incorrectly on the scanner glass, it
◦
◦
◦
Adjust the software settings according to how you plan to use the scanned page.
Use or make a carrier sheet to protect your originals.
Scan defects are apparent
•
Blank pages
Make sure that the original document is placed correctly. Place the original
document face down on the flatbed scanner with the top-left corner of the
document located in the lower-right corner of the scanner glass.
•
Too light or dark
◦
Try adjusting the settings. Be sure to use the correct resolution and color
settings.
◦
The original image might be very light or dark or might be printed on colored
paper.
150
Maintain and troubleshoot
•
•
Unwanted lines
Ink, glue, correction fluid, or an unwanted substance might be on the scanner
Black dots or streaks
◦
Ink, glue, correction fluid, or an unwanted substance might be on the scanner
glass, the scanner glass might be dirty or scratched, or the lid backing might be
more information. If cleaning does not correct the problem, the scanner glass
or lid backing might need to be replaced.
◦
The defects might be on the original and not a result of the scanning process.
•
•
Unclear text
Try adjusting the settings. Make sure that the resolution and color settings are
correct.
Size is reduced
The HP software settings might be set to reduce the scanned image. See the
product software Help for more information about changing the settings.
Solve fax problems
This section contains fax setup troubleshooting information for the device. If the device
is not set up properly for faxing, you might experience problems when sending faxes,
receiving faxes, or both.
If you are having faxing problems, you can print a fax test report to check the status of
the device. The test will fail if the device is not set up properly for faxing. Perform this
test after you have completed setting up the device for faxing. For more information,
If the test fails, review the report for information on how to fix any problems found. For
•
•
•
•
•
•
•
•
•
The fax test failed
If you ran a fax test and the test failed, review the report for basic information about
the error. For more detailed information, check the report to see which part of the test
failed, and then review the appropriate topic in this section for solutions to try.
151
Solve fax problems
Chapter 9
This section contains the following topics:
•
•
•
•
•
•
The "Fax Hardware Test" failed
Solution:
•
Turn off the device by using the Power button located on the device control
panel and then unplug the power cord from the back of the device. After a few
seconds, plug the power cord in again, and then turn the power on. Run the
test again. If the test fails again, continue reviewing the troubleshooting
information in this section.
•
•
Try to send or receive a test fax. If you can send or receive a fax successfully,
there might not be a problem.
If you are running the test from the Fax Setup Wizard (Windows) or HP Fax
Setup Utility (Mac OS), make sure the device is not busy completing another
task, such as receiving a fax or making a copy. Check the display for a
message indicating that the device is busy. If it is busy, wait until it is finished
and in the idle state before running the test.
•
•
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it
passes and the device is ready for faxing. If the Fax Hardware Test continues to
fail and you experience problems faxing, contact HP Support. Go to www.hp.com/
information on calling for technical support.
The "Fax Connected to Active Telephone Wall Jack" test failed
Solution:
•
Check the connection between the telephone wall jack and the device to make
sure the phone cord is secure.
•
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
152
Maintain and troubleshoot
•
Make sure you have correctly connected the device to the telephone wall jack.
Using the phone cord supplied in the box with the device, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the device. For more information on setting up the device for
•
•
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the device and check for a dial tone. If you do not hear a dial
tone, contact your telephone company and have them check the line.
Try to send or receive a test fax. If you can send or receive a fax successfully,
there might not be a problem.
After you resolve any problems found, run the fax test again to make sure it
passes and the device is ready for faxing.
The "Phone Cord Connected to Correct Port on Fax" test failed
Solution: Plug the phone cord into the correct port.
1. Using the phone cord supplied in the box with the device, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the device.
NOTE: If you use the 2-EXT port to connect to the telephone wall jack,
you will not be able to send or receive faxes. The 2-EXT port should only
be used to connect other equipment, such as an answering machine.
Figure 9-1 Back view of the device
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to the "1-LINE"
port
2. After you have connected the phone cord to the port labeled 1-LINE, run the
fax test again to make sure it passes and the device is ready for faxing.
3. Try to send or receive a test fax.
153
Solve fax problems
Chapter 9
•
•
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
The "Using Correct Type of Phone Cord with Fax" test failed
Solution:
•
Make sure you used the phone cord supplied in the box with the device to
connect to the telephone wall jack. One end of the phone cord should be
connected to the port labeled 1-LINE on the back of the device, and the other
end to your telephone wall jack, as shown below.
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to the "1-LINE"
port
If the phone cord that came with the device is not long enough, you can use a
coupler to extend the length. You can purchase a coupler at an electronics
store that carries phone accessories. You will also need another phone cord,
which can be a standard phone cord that you might already have in your home
or office.
•
•
Check the connection between the telephone wall jack and the device to make
sure the phone cord is secure.
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
154
Maintain and troubleshoot
The "Dial Tone Detection" test failed
Solution:
•
Other equipment, which uses the same phone line as the device, might be
causing the test to fail. To find out if other equipment is causing a problem,
disconnect everything from the phone line, and then run the test again. If the
Dial Tone Detection Test passes without the other equipment, then one or
more pieces of the equipment is causing problems; try adding them back one
at a time and rerunning the test each time, until you identify which piece of
equipment is causing the problem.
•
•
Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the device and check for a dial tone. If you do not hear a dial
tone, contact your telephone company and have them check the line.
Make sure you have correctly connected the device to the telephone wall jack.
Using the phone cord supplied in the box with the device, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the device.
•
•
•
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
If your telephone system is not using a standard dial tone, such as some PBX
systems, this might cause the test to fail. This will not cause a problem sending
or receiving faxes. Try sending or receiving a test fax.
Check to make sure the country/region setting is set appropriately for your
country/region. If the country/region setting is not set or is set incorrectly, the
test might fail and you might have problems sending and receiving faxes.
Make sure you connect the device to an analog phone line or you will not be
able to send or receive faxes. To check if your phone line is digital, connect a
regular analog phone to the line and listen for a dial tone. If you do not hear a
normal sounding dial tone, it might be a phone line set up for digital phones.
Connect the device to an analog phone line and try sending or receiving a fax.
•
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
After you resolve any problems found, run the fax test again to make sure it
passes and the device is ready for faxing. If the Dial Tone Detection test
continues to fail, contact your telephone company and have them check the phone
line.
155
Solve fax problems
Chapter 9
The "Fax Line Condition" test failed
Solution:
•
Make sure you connect the device to an analog phone line or you will not be
able to send or receive faxes. To check if your phone line is digital, connect a
regular analog phone to the line and listen for a dial tone. If you do not hear a
normal sounding dial tone, it might be a phone line set up for digital phones.
Connect the device to an analog phone line and try sending or receiving a fax.
•
•
Check the connection between the telephone wall jack and the device to make
sure the phone cord is secure.
Make sure you have correctly connected the device to the telephone wall jack.
Using the phone cord supplied in the box with the device, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the device.
•
Other equipment, which uses the same phone line as the device, might be
causing the test to fail. To find out if other equipment is causing a problem,
disconnect everything from the phone line, and then run the test again.
◦
If the Fax Line Condition Test passes without the other equipment, then
one or more pieces of the equipment is causing problems; try adding them
back one at a time and rerunning the test each time, until you identify which
piece of equipment is causing the problem.
◦
If the Fax Line Condition Test fails without the other equipment, connect
the device to a working phone line and continue reviewing the
troubleshooting information in this section.
•
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
Make sure you use the phone cord that came with the device. If you do not use
the supplied phone cord to connect from the telephone wall jack to the device,
you might not be able to send or receive faxes. After you plug in the phone
cord that came with the device, run the fax test again.
After you resolve any problems found, run the fax test again to make sure it
passes and the device is ready for faxing. If the Fax Line Condition test continues
to fail and you experience problems faxing, contact your telephone company and
have them check the phone line.
The display always shows Phone Off Hook
Solution: You are using the wrong type of phone cord. Make sure you are using
the phone cord that came with the device to connect the device to your phone line.
If the phone cord that came with the device is not long enough, you can use a
coupler to extend the length. You can purchase a coupler at an electronics store
that carries phone accessories. You will also need another phone cord, which can
be a standard phone cord that you might already have in your home or office.
Solution: Other equipment that uses the same phone line as the device might be
in use. Make sure extension phones (phones on the same phone line, but not
156
Maintain and troubleshoot
connected to the device) or other equipment are not in use or off the hook. For
example, you cannot use the device for faxing if an extension phone is off the
hook, or if you are using a computer dial-up modem to send e-mail or access the
Internet.
The device is having problems sending and receiving faxes
Solution: Make sure the device is turned on. Look at the display on the device. If
the display is blank and the Power light is not lit, the device is turned off. Make
sure the power cord is firmly connected to the device and plugged into a power
outlet. Press the Power button to turn on the device.
After turning on the device, HP recommends you wait five minutes before sending
or receiving a fax. The device cannot send or receive faxes while it is initializing
after being turned on.
Solution:
•
Make sure you used the phone cord supplied in the box with the device to
connect to the telephone wall jack. One end of the phone cord should be
connected to the port labeled 1-LINE on the back of the device and the other
end to your telephone wall jack, as shown below.
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to the "1-LINE"
port
If the phone cord that came with the device is not long enough, you can use a
coupler to extend the length. You can purchase a coupler at an electronics
store that carries phone accessories. You will also need another phone cord,
which can be a standard phone cord that you might already have in your home
or office.
•
Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the device and check for a dial tone. If you do not hear a dial
tone, call your local telephone company for service.
157
Solve fax problems
Chapter 9
•
•
•
Other equipment, which uses the same phone line as the device, might be in
use. For example, you cannot use the device for faxing if an extension phone
is off the hook, or if you are using a computer dial-up modem to send an e-mail
or access the Internet.
Check to see if another process has caused an error. Check the display or
your computer for an error message providing information about the problem
and how to solve it. If there is an error, the device will not send or receive a fax
until the error condition is resolved.
The phone line connection might be noisy. Phone lines with poor sound quality
(noise) can cause faxing problems. Check the sound quality of the phone line
by plugging a phone into the telephone wall jack and listening for static or other
noise. If you hear noise, turn Error Correction Mode (ECM) off and try faxing
again. For information about changing ECM, see the onscreen Help. If the
problem persists, contact your telephone company.
•
•
If you are using a digital subscriber line (DSL) service, make sure that you
have a DSL filter connected or you will not be able to fax successfully. For
Make sure the device is not connected to a telephone wall jack that is set up
for digital phones. To check if your phone line is digital, connect a regular
analog phone to the line and listen for a dial tone. If you do not hear a normal
sounding dial tone, it might be a phone line set up for digital phones.
•
•
If you are using either a private branch exchange (PBX) or an integrated
services digital network (ISDN) converter/terminal adapter, make sure the
device is connected to the correct port and the terminal adapter is set to the
correct switch type for your country/region, if possible. For more information,
If the device shares the same phone line with a DSL service, the DSL modem
might not be properly grounded. If the DSL modem is not properly grounded, it
can create noise on the phone line. Phone lines with poor sound quality (noise)
can cause faxing problems. You can check the sound quality of the phone line
by plugging a phone into the telephone wall jack and listening for static or other
noise. If you hear noise, turn off your DSL modem and completely remove
power for at least 15 minutes. Turn the DSL modem back on and listen to the
dial tone again.
NOTE: You might notice static on the phone line again in the future. If the
device stops sending and receiving faxes, repeat this process.
If the phone line is still noisy, contact your telephone company. For information
on turning your DSL modem off, contact your DSL provider for support.
•
If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the device directly to the telephone wall jack.
158
Maintain and troubleshoot
The device is having problems sending a manual fax
Solution:
NOTE: This possible solution applies only in the countries/regions that
receive a 2-wire phone cord in the box with the device, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.
•
Make sure the telephone you use to initiate the fax call is connected directly to
the device. To send a fax manually, the telephone must be connected directly
to the port labeled 2-EXT on the device, as shown below.
1
2
Telephone wall jack
Use the phone cord supplied in the box with the device to connect to the "1-LINE"
port
3
Telephone
•
If you are sending a fax manually from your phone that is connected directly to
the device, you must use the keypad on the telephone to send the fax. You
cannot use the keypad on the device control panel.
NOTE: If using a serial-type phone system, please connect your phone
directly on top of the device cable which has a wall plug attached to it.
The device cannot receive faxes, but can send faxes
Solution:
•
If you are not using a distinctive ring service, check to make sure that the
Distinctive Ring feature on the device is set to All Rings. For more
•
If Auto Answer is set to Off, you will need to receive faxes manually;
otherwise, the device will not receive the fax. For information on receiving
159
Solve fax problems
Chapter 9
•
If you have a voice mail service at the same phone number you use for fax
calls, you must receive faxes manually, not automatically. This means that you
must be available to respond in person to incoming fax calls. For information
on setting up the device when you have a voice mail service, see Case F:
Shared voice/fax line with voice mail. For information on receiving faxes
•
•
If you have a computer dial-up modem on the same phone line with the device,
check to make sure that the software that came with your modem is not set to
receive faxes automatically. Modems that are set up to receive faxes
automatically take over the phone line to receive all incoming faxes, which
prevents the device from receiving fax calls.
If you have an answering machine on the same phone line with the device, you
might have one of the following problems:
◦
◦
Your answering machine might not be set up properly with the device.
Your outgoing message might be too long or too loud to allow the device to
detect fax tones, and the sending fax machine might disconnect.
◦
Your answering machine might not have enough quiet time after your
outgoing message to allow the device to detect fax tones. This problem is
most common with digital answering machines.
The following actions might help solve these problems:
◦
When you have an answering machine on the same phone line you use for
fax calls, try connecting the answering machine directly to the device as
◦
◦
Make sure the device is set to receive faxes automatically. For information
Make sure the Rings to Answer setting is set to a greater number of rings
than the answering machine. For more information, see Set the number of
◦
◦
Disconnect the answering machine and then try receiving a fax. If faxing is
successful without the answering machine, the answering machine might
be causing the problem.
Reconnect the answering machine and record your outgoing message
again. Record a message that is approximately 10 seconds in duration.
Speak slowly and at a low volume when recording your message. Leave at
least 5 seconds of silence at the end of the voice message. There should
be no background noise when recording this silent time. Try to receive a
fax again.
NOTE: Some digital answering machines might not retain the
recorded silence at the end of your outgoing message. Play back your
outgoing message to check.
160
Maintain and troubleshoot
•
If the device shares the same phone line with other types of phone equipment,
such as an answering machine, a computer dial-up modem, or a multi-port
switch box, the fax signal level might be reduced. The signal level can also be
reduced if you use a splitter or connect extra cables to extend the length of
your phone. A reduced fax signal can cause problems during fax reception.
To find out if other equipment is causing a problem, disconnect everything
except the device from the phone line, and then try to receive a fax. If you can
receive faxes successfully without the other equipment, one or more pieces of
the other equipment is causing problems; try adding them back one at a time
and receiving a fax each time, until you identify which equipment is causing the
problem.
•
If you have a special ring pattern for your fax phone number (using a distinctive
ring service through your telephone company), make sure that the Distinctive
The device cannot send faxes, but can receive faxes
Solution:
•
The device might be dialing too fast or too soon. You might need to insert
some pauses in the number sequence. For example, if you need to access an
outside line before dialing the phone number, insert a pause following the
access number. If your number is 95555555, and 9 accesses an outside line,
you might insert pauses as follows: 9-555-5555. To enter a pause in the fax
number you are typing, press Redial/Pause, or press the Space (#) button
repeatedly, until a dash (-) appears on the display.
You can also send the fax using monitor dialing. This enables you to listen to
the phone line as you dial. You can set the pace of your dialing and respond to
•
The number you entered when sending the fax is not in the proper format or
the receiving fax machine is having problems. To check this, try calling the fax
number from a telephone and listen for fax tones. If you cannot hear fax tones,
the receiving fax machine might not be turned on or connected, or a voice mail
service could be interfering with the recipient's phone line. You can also ask
the recipient to check the receiving fax machine for any problems.
161
Solve fax problems
Chapter 9
Fax tones are recorded on my answering machine
Solution:
•
When you have an answering machine on the same phone line you use for fax
calls, try connecting the answering machine directly to the device as described
the answering machine as recommended, fax tones might be recorded on your
answering machine.
•
Make sure the device is set to receive faxes automatically and that the Rings
to Answer setting is correct. The number of rings to answer for the device
should be greater than the number of rings to answer for the answering
machine. If the answering machine and the device are set to the same number
of rings to answer, both devices answer the call and fax tones are recorded on
the answering machine.
•
Set your answering machine to a low number of rings and the device to answer
in the maximum number of rings supported. (The maximum number of rings
varies by country/region.) In this setup, the answering machine answers the
call and the device monitors the line. If the device detects fax tones, the device
receives the fax. If the call is a voice call, the answering machine records the
incoming message. For more information, see Set the number of rings before
The phone cord that came with my device is not long enough
Solution: If the phone cord that came with the device is not long enough, you
can use a coupler to extend the length. You can purchase a coupler at an
electronics store that carries phone accessories. You will also need another phone
cord, which can be a standard phone cord that you might already have in your
home or office.
TIP: If the device came with a 2-wire phone cord adaptor, you can use it with
a 4-wire phone cord to extend the length. For information on using the 2-wire
phone cord adaptor, see the documentation that came with it.
To extend your phone cord
1. Using the phone cord supplied in the box with the device, connect one end to
the coupler, then connect the other end to the port labeled 1-LINE on the back
of the device.
2. Connect another phone cord to the open port on the coupler and to the
telephone wall jack.
The computer cannot receive faxes (Fax to PC)
Cause: The HP Digital Imaging monitor is turned off.
Solution: Check the taskbar and ensure that the HP Digital Imaging monitor is
turned on at all times.
162
Maintain and troubleshoot
Cause: The computer selected to receive faxes is turned off.
Solution: Make sure the computer selected to receive faxes is switched on at all
times.
Cause: Different computers are configured for setup and receiving faxes and one
of them may be switched off.
Solution: If the computer receiving faxes is different from the one used for setup,
both computers should be switched on at all times.
Cause: There is no paper in the input tray.
Solution: Load paper in the input tray.
Cause: The internal memory is full.
Solution: Clear the internal memory by clearing the fax log and memory.
Cause: Fax to PC is not activated or the computer is not configured to receive
faxes
Solution: Activate Fax to PC and make sure the computer is configured to
receive faxes.
Cause: HP Digital Imaging Monitor is not operating properly
Solution: Restart the HP Digital Imaging Monitor or restart the computer.
Solve network problems
NOTE: After correcting any of the following, run the installation program again.
General network troubleshooting
•
If you are unable to install the device software, verify that:
◦
◦
◦
All cable connections to the computer and the device are secure.
The network is operational and the network hub is turned on.
All applications, including virus protection programs, spyware protection
programs, and firewalls, are closed or disabled for computers running Windows.
Solve network problems
163
Chapter 9
◦
◦
Make sure the device is installed on the same subnet as the computers that
will be using the device.
If the installation program cannot discover the device, print the network
configuration page, and enter the IP address manually in the installation
program. For more information, see Understand the network configuration page
•
If you are using a computer running Windows, make sure that the network ports
created in the device driver match the device IP address:
◦
◦
Print the device’s network configuration page.
Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
Right-click the device icon, click Properties, and then click the Ports tab.
Select the TCP/IP port for the device, and then click Configure Port.
◦
◦
◦
Compare the IP address listed in the dialog box and make sure it matches the
IP address listed on the network configuration page. If the IP addresses are
different, change the IP address in the dialog box to match the address on the
network configuration page.
◦
Click OK twice to save the settings and close the dialog boxes.
Problems connecting to a wired network
•
If the Link light on the network connector does not turn on, make sure that all of
the “General network troubleshooting” conditions are met.
•
Though it is not recommended that you assign the device with a static IP address,
you might resolve some installation problems (such as a conflict with a personal
firewall) by doing so.
164
Maintain and troubleshoot
Solve wireless problems
If the device is unable to communicate with the network after completing the wireless
setup and software installation, perform one or more of the following tasks.
Check the wireless communication settings
•
Make sure the computer’s wireless card is set to the correct wireless profile. A
wireless profile is a set of network settings unique to a given network. A single
wireless card might have several wireless profiles (for example, one for a home
network and one for an office network). Open the Configuration utility for the
network card installed on your computer, and ensure that the profile selected is the
profile for the device’s network.
•
Make sure the device’s network settings match those of your network. Do one of
the following to find the settings for your network:
◦
Infrastructure communication: Open the wireless access point’s (WAP)
Configuration utility.
◦
Ad hoc communication: Open the Configuration utility for the network card
installed in your computer.
•
Compare the network’s settings to those on the device’s network configuration
page, and note any differences. For more information, see Understand the network
configuration page. Possible problems include the following:
◦
◦
The WAP filters hardware addresses (MAC addresses).
One of these settings in the device might be incorrect: communication mode,
network name (SSID), channel (ad hoc networks only), authentication type,
encryption.
◦
Print a document. If the document still does not print, then reset the device’s
network settings and reinstall the device software.
If the wireless network settings are correct, the computer might be associated with
another wireless network. Ensure that the computer is associated with the same
wireless network as that of the device.
Users can ensure this by checking the wireless settings on their respective computers.
In addition, ensure that the computers have access to the wireless network.
If the wireless network settings are incorrect, follow these steps to correct the device’s
settings:
1. Connect the device to your network with a network cable or to the computer using
the network cable.
2. Open the device’s embedded Web server.
3. Click the Networking tab, and then click Wireless (802.11) in the left pane.
4. Use the Wireless Setup wizard on the Wireless Setup tab to change the device’s
settings to match the settings of the network.
5. Close the device’s embedded Web server, and then disconnect the network cable
from the device.
6. Uninstall the device software completely, and then reinstall the software.
Solve wireless problems
165
Chapter 9
Add hardware addresses to a wireless access point (WAP)
MAC filtering is a security feature in which a wireless access point (WAP) is configured
with a list of MAC addresses (also called “hardware addresses”) of devices that are
allowed to gain access to the network through the WAP. If the WAP does not have the
hardware address of a device attempting to access the network, the WAP denies the
device access to the network. If the WAP filters MAC addresses, then the device’s
MAC address must be added to the WAP’s list of accepted MAC addresses.
•
Print the network configuration page. For more information, see Understand the
•
Open the WAP’s configuration utility, and add the device’s hardware address to
the list of accepted MAC addresses.
Reset network configuration settings
If the device is still unable to communicate with the network, reset the device’s network
settings.
•
•
•
Press Setup. Press an arrow button to move to Network, and then press OK.
Press an arrow button to move to Restore Network Defaults, and then press OK.
Print the network configuration page and verify that the network settings have
By default, the network name (SSID) is “hpsetup” and the communication mode is
“ad hoc.”
Solve photo (memory card) problems
support.
NOTE: If you are starting a memory card operation from a computer, see the
software Help for troubleshooting information.
•
•
•
The device cannot read the memory card
•
Check the memory card
◦
Make sure that the memory card is one of the supported types. For Compact
Flash II - solid state memory only. For more information, see Insert a memory
card.
◦
Some memory cards have a switch that controls how they can be used. Make
sure that the switch is set so that the memory card can be read.
166
Maintain and troubleshoot
◦
◦
Inspect the ends of the memory card for dirt or material that closes a hole or
spoils a metal contact. Clean the contacts with a lint-free cloth and small
amounts of isopropyl alcohol.
Assure that the memory card is working properly by testing it with other devices.
•
Check the memory card slot
◦
Make sure that the memory card is fully inserted into the correct slot. For more
◦
Remove the memory card (when the light is not blinking) and shine a flashlight
into the empty slot. See if any of the small pins inside are bent. When the
computer is off, you can straighten slightly bent pins by using the tip of a thin,
retracted ballpoint pen. If a pin has bent in such a way that it touches another
pin, replace the memory card reader or have the device serviced. For more
◦
Make sure that only one memory card has been inserted at a time in the slots.
An error message should appear on the control-panel display if more than one
memory card is inserted.
The device cannot read photos on the memory card
Check the memory card
The memory card might be corrupt.
The device prints half a page, then ejects the paper
Check the print cartridges
Make sure the correct print cartridges are installed and the print cartridges are not low
HP cannot guarantee the quality of non-HP print cartridges.
Troubleshoot installation issues
support.
•
•
Hardware installation suggestions
Check the device
•
Make sure that all packing tape and material have been removed from outside and
inside the device.
•
•
Make sure that the device is loaded with paper.
Make sure that no lights are on or blinking except the Ready light, which should be
on. If the Attention light is blinking, check for messages on the device control panel.
167
Troubleshoot installation issues
Chapter 9
Check the hardware connections
•
•
Make sure that any cords and cables that you are using are in good working order.
Make sure that the power cord is connected securely to both the device and to a
working power outlet.
•
Make sure that the phone cord is connected to the 1-LINE port.
Check the print cartridges
•
Whenever you install a new print cartridge, the device aligns the print cartridges
automatically. If the alignment fails, check to make sure the cartridges are installed
correctly, and start the print cartridge alignment. For more information, see Align
•
Make sure that all latches and covers are closed properly.
Check the computer system
•
•
Make sure that your computer is running one of the supported operating systems.
Make sure that the computer meets at least the minimum system requirements.
Check the device to ensure the following
•
Power light is on and not blinking. When the device is first turned on, it takes
approximately 45 seconds to warm up.
•
The device is in the Ready state, and no other lights on the device control panel
are lit or blinking. If lights are lit or blinking, see the message on the device control
panel.
•
Ensure power cord and other cables are working, and are firmly connected to the
device.
•
•
•
•
All packing tapes and materials are removed from the device.
Duplexer is locked into place.
Paper is loaded correctly in the tray, and is not jammed in the device.
All latches and covers are closed.
Software installation suggestions
Verify installation preliminaries
•
Make sure to use the Starter CD that contains the correct installation software for
your operating system.
•
•
Before installing software, make sure that all other programs are closed.
If the computer does not recognize the path to the CD-ROM drive that you type,
make sure that you are specifying the correct drive letter.
•
If the computer cannot recognize the Starter CD in the CD-ROM drive, inspect the
Starter CD for damage. You can download the device driver from the HP Web site
168
Maintain and troubleshoot
Check or perform the following
•
•
Make sure the computer meets the system requirements.
Before installing software on a Windows computer, ensure all other programs are
closed.
•
•
If the computer does not recognize the path to the CD drive that you typed, ensure
you are specifying the correct drive letter.
If the computer cannot recognize the Starter CD in the CD drive, inspect the CD for
damage. You can download the device driver from the HP Web site (www.hp.com/
support).
•
•
In the Windows device manager, make sure that the USB drivers have not been
disabled.
If you are using a computer running Windows, and the computer cannot detect the
device, run the uninstallation utility (util\ccc\uninstall.bat on the Starter CD) to
perform a clean uninstallation of the device driver. Restart your computer, and
reinstall the device driver.
Check the computer system
•
•
Make sure that your computer is running one of the supported operating systems.
Make sure that the computer meets at least the minimum system requirements.
Clear jams
Occasionally, media becomes jammed during a job. Try the following remedies before
you attempt to clear the jam.
•
Make sure that you are printing with media that meets specifications. For more
•
•
•
Make sure that you are printing with media that is not wrinkled, folded, or damaged.
Make sure that the trays are loaded correctly and are not too full. For more
This section contains the following topics:
•
•
Clear paper jams
If the paper was loaded in the input tray, you might need to clear the paper jam from
the duplexer.
Paper can also jam in the automatic document feeder. Several common actions can
cause paper to jam the automatic document feeder:
•
Placing too much paper in the document feeder tray. For information on the
maximum number of sheets allowed in the automatic document feeder, see Load
•
•
Using paper that is too thick or too thin for the device.
Trying to add paper to the document feeder tray while the device is feeding pages.
169
Clear jams
Chapter 9
To clear a paper jam from the duplexer
1. Remove the duplexer.
CAUTION: Trying to clear a paper jam from the front of the device can
damage the print mechanism. Always access and clear paper jams through the
duplexer.
2. Gently pull the paper out of the rollers.
CAUTION: If the paper tears when you are removing it from the rollers, check
the rollers and wheels for torn pieces of paper that might be remaining inside
the device. If you do not remove all the pieces of paper from the device, more
paper jams are likely to occur.
3. Replace the duplexer. Gently push the door forward until it snaps into place.
4. Press OK to continue the current job.
To clear a paper jam in the automatic document feeder
1. Lift the cover of the automatic document feeder.
2. Gently pull the paper out of the rollers.
CAUTION: If the paper tears when you are removing it from the rollers, check
the rollers and wheels for torn pieces of paper that might be remaining inside
the device. If you do not remove all the pieces of paper from the device, more
paper jams are likely to occur.
3. Close the cover of the automatic document feeder.
170
Maintain and troubleshoot
Avoid paper jams
To help avoid paper jams, follow these guidelines.
•
•
Remove printed papers from the output tray frequently.
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable
bag.
•
•
•
Ensure that paper loaded in the input tray lays flat and the edges are not bent or
torn.
Do not combine different paper types and paper sizes in the input tray; the entire
stack of paper in the input tray must be the same size and type.
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make
sure the paper-width guide does not bend the paper in the input tray.
•
•
Do not force paper too far forward in the input tray.
Use paper types that are recommended for the device. For more information, see
•
Do not leave originals on the glass. If you load an original in the automatic
document feeder while there is already an original on the glass, the original can
jam in the automatic document feeder.
171
Clear jams
A
HP supplies and accessories
This section provides information on HP supplies and accessories for the device. The information
may also make purchases through the Web site.
This section contains the following topics:
•
•
Order printing supplies online
Besides the HP Web site, you may order printing supplies using the following tools:
•
•
Toolbox (Windows): On the Estimated Ink Level tab, click Shop Online.
HP Printer Utility (Mac OS): Click Supplies Status from the Information and Support
panel, click the Shop for HP Supplies drop-down menu, and then choose Online.
Supplies
This section contains the following topics:
•
•
Supported print cartridges
The availability of print cartridges varies by country/region. The print cartridges might come in
different sizes.
You can find the print cartridge number in the following places:
•
•
On the label of the print cartridge you are replacing.
Windows: From the Toolbox, if you have bidirectional communication, click the Estimated
Ink Levels tab, scroll to display the Cartridge Details button, and then click Cartridge Details.
•
Mac OS: From the HP Printer Utility, click Supply Info from the Information and Support
panel, and then click Retail Supplies Information.
HP media
Choose your country/region, and then select Buy or Shopping.
172
HP supplies and accessories
B
Support and warranty
device is not operating correctly and those suggestions did not solve your problem, try using one
of the following support services to obtain assistance.
This section contains the following topics:
•
•
•
•
•
Obtain electronic support
prompted, choose your country/region, and then click Contact HP for information on calling for
technical support.
This Web site also offers technical support, drivers, supplies, ordering information and other
options such as:
•
•
•
•
Access online support pages.
Send HP an e-mail message for answers to your questions.
Connect with an HP technician by using online chat.
Check for software updates.
You can also obtain support from the Toolbox (Windows) or HP Printer Utility (Mac OS), which
provide easy, step-by-step solutions to common printing problems. For more information, see
Support options and availability vary by product, country/region, and language.
173
Support and warranty
Appendix B
Warranty
HP product
Duration of limited warranty
Software Media
Printer
90 days
1 year
Print or Ink cartridges
Until the HP ink is depleted or the “end of warranty” date printed
on the cartridge has been reached, whichever occurs first. This
warranty does not cover HP ink products that have been refilled,
remanufactured, refurbished, misused, or tampered with.
Accessories
1 year unless otherwise stated
A. Extent of limited warranty
1. Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from defects
in materials and workmanship for the duration specified above, which duration begins on the date of purchase by the
customer.
2. For software products, HP’s limited warranty applies only to a failure to execute programming instructions. HP does not
warrant that the operation of any product will be interrupted or error free.
3. HP's limited warranty covers only those defects that arise as a result of normal use of the product, and does not cover
any other problems, including those that arise as a result of:
a. Improper maintenance or modification;
b. Software, media, parts, or supplies not provided or supported by HP;
c. Operation outside the product's specifications;
d. Unauthorized modification or misuse.
4. For HP printer products, the use of a non-HP cartridge or a refilled cartridge does not affect either the warranty to the
customer or any HP support contract with the customer. However, if printer failure or damage is attributable to the use of
a non-HP or refilled cartridge or an expired ink cartridge, HP will charge its standard time and materials charges to
service the printer for the particular failure or damage.
5. If HP receives, during the applicable warranty period, notice of a defect in any product which is covered by HP's
warranty, HP shall either repair or replace the product, at HP's option.
6. If HP is unable to repair or replace, as applicable, a defective product which is covered by HP's warranty, HP shall,
within a reasonable time after being notified of the defect, refund the purchase price for the product.
7. HP shall have no obligation to repair, replace, or refund until the customer returns the defective product to HP.
8. Any replacement product may be either new or like-new, provided that it has functionality at least equal to that of the
product being replaced.
9. HP products may contain remanufactured parts, components, or materials equivalent to new in performance.
10. HP's Limited Warranty Statement is valid in any country where the covered HP product is distributed by HP. Contracts
for additional warranty services, such as on-site service, may be available from any authorized HP service facility in
countries where the product is distributed by HP or by an authorized importer.
B. Limitations of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKES ANY
OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR
PURPOSE.
C. Limitations of liability
1. To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and
exclusive remedies.
2. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN
THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON
CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
D. Local law
1. This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary
from state to state in the United States, from province to province in Canada, and from country to country elsewhere in
the world.
2. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed
modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty
Statement may not apply to the customer. For example, some states in the United States, as well as some governments
outside the United States (including provinces in Canada), may:
a. Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory rights of a consumer
(e.g., the United Kingdom);
b. Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or
c. Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer
cannot disclaim, or allow limitations on the duration of implied warranties.
3. THE TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT
EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS
APPLICABLE TO THE SALE OF THE HP PRODUCTS TO SUCH CUSTOMERS.
HP Limited Warranty
Dear Customer,
You will find below the name and address of the HP entity responsible for the performance of the HP Limited Warranty in your
country.
You may have additional statutory rights against the seller based on your purchase agreement. Those rights are not
in any way affected by this HP Limited Warranty.
Ireland: Hewlett-Packard Ireland Ltd. 30 Herbert Street IRL-Dublin 2
United Kingdom: Hewlett-Packard Ltd, Cain Road, Bracknell, GB-Berks RG12 1HN
174
Support and warranty
Obtain HP telephone support
During the warranty period, you may obtain assistance from the HP Customer Care Center.
This section contains the following topics:
•
•
•
•
•
•
Before you call
fixes and updates.
To assist our Customer Care Center representatives to serve you better, prepare the following
information if you need to call HP.
self-test diagnostic page. If the device does not print, get the following information ready:
•
•
Device model
Model number and serial number (check the back of the device)
2. Check the operating system that you are using, such as Windows XP.
3. If the device is connected to the network, check the network operating system.
4. Note how the device is connected to your system, such as through USB or network
connection.
5. Obtain the version number of the printer software. (To find the version number of the printer
driver, open the printer settings or properties dialog box, and click the About tab.)
6. If you have a problem printing from a particular application, note the application and version
number.
Support process
If you have a problem, follow these steps
1. Check the documentation that came with the device.
to all HP customers. It is the fastest source for up-to-date device information and expert
assistance and includes the following features:
•
•
•
•
Fast access to qualified online support specialists
Software and driver updates for the HP All-in-One
Valuable troubleshooting information for common problems
Proactive device updates, support alerts, and HP newsgrams that are available when
you register the HP All-in-One
3. Call HP support. Support options and availability vary by device, country/region, and language.
HP support by phone
This section contains the following topics:
•
•
•
•
175
Obtain HP telephone support
Appendix B
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America
(including Mexico).
Telephone support numbers
In many locations, HP provides toll free telephone support during the warranty period. However,
some of the support numbers might not be toll free.
176
Support and warranty
Placing a call
Call HP support while you are in front of the computer and the HP All-in-One. Be prepared to
provide the following information:
•
•
•
•
Model number (located on the label on the front of the device)
Serial number (located on the back or bottom of the device)
Messages that appear when the situation occurs
Answers to these questions:
◦
◦
◦
Has this situation happened before?
Can you re-create it?
Did you add any new hardware or software to your computer at about the time that this
situation began?
◦
Did anything else occur prior to this situation (such as a thunderstorm, HP All-in-One was
moved, etc.)?
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be
the support phone number for your country/region to learn more about support options.
Additional warranty options
Extended service plans are available for the HP All-in-One at additional costs. Go to www.hp.com/
support, select your country/region and language, then explore the services and warranty area for
information about the extended service plans.
177
Obtain HP telephone support
Prepare the device for shipment
If after contacting HP Customer Support or returning to the point of purchase, you are requested
to send the device in for service, make sure you remove and keep the following items before
returning your device:
•
•
•
•
•
•
•
The print cartridges
The control-panel faceplate
The duplexer
The output tray
The power cord, USB cable, and any other cable connected to the device
Any paper loaded in the input tray
Remove any originals you might have loaded in the device
This section contains the following topics:
•
•
•
•
Remove the device control-panel faceplate
Complete the following steps once you have removed the print cartridges.
NOTE: This information does not apply to customers in Japan.
CAUTION: The device must be unplugged before following these steps.
CAUTION: The replacement device will not be shipped with a power cord. Store the power
cord in a safe place until the replacement arrives.
To remove the control-panel faceplate
1. Press the Power button to turn off the device.
2. Unplug the power cord, and then disconnect it from the device. Do not return the power cord
with the device.
179
Prepare the device for shipment
Appendix B
3. Remove the control-panel faceplate as follows:
a. Lift the scanner lid.
b. Use either your finger or insert a thin object in the tab on the upper right corner of the
control-panel faceplate to pry the control-panel faceplate off.
4. Retain the control-panel faceplate. Do not return the control-panel faceplate with the HP All-
in-One.
CAUTION: The replacement device might not come with a control-panel faceplate.
Store your control-panel faceplate in a safe place, and when the replacement device
arrives, reattach your control-panel faceplate. You must attach your control-panel
faceplate to use the control-panel functions on the replacement device.
NOTE: See the setup poster that came with the device for instructions on how to attach
your control-panel faceplate. The replacement device might come with instructions for
setting up your device.
Remove the print cartridges before shipment
Before you return the device, make sure you remove the print cartridges.
180
Support and warranty
NOTE: This information does not apply to customers in Japan.
To remove print cartridges before shipment
1. Turn on the device and wait until the print carriage is idle and silent. If the device will not turn
on, skip this step and go to step 2.
NOTE: If the device does not turn on, you can unplug the power cord and then
manually slide the print carriage to the far right side to remove the print cartridges.
2. Gently pull open the print cartridge cover.
3. Remove the print cartridges from their slots by grasping each between your thumb and
forefinger and pulling it firmly toward you.
4. Place the print cartridges in an airtight plastic container so they will not dry out, and put them
aside. Do not send them with the device unless the HP customer support call agent instructs
you to.
5. Close the print cartridge door and wait a few minutes for the print carriage to move back to its
home position (on the left side).
6. After the scanner is idle and has returned to its parked position, press the Power button to
turn off the device.
Remove the duplexer
Remove the duplexer before shipping the device.
181
Prepare the device for shipment
Appendix B
▲
Push the button on either side of the rear access panel or the duplexer, and then remove the
panel or unit.
Remove the output tray
Remove the output tray before shipping the device.
▲
Lift the output tray, and gently pull it out of the device.
Pack the device
Complete the following steps after you have prepared the device for shipment.
To pack the device
1. If available, pack the device for shipment by using the original packaging materials, or use
the packaging materials that came with your replacement device.
182
Support and warranty
If you do not have the original packaging materials, please use other adequate packaging
materials. Shipping damage caused by improper packaging and/or improper transportation is
not covered under the warranty.
2. Place the return shipping label on the outside of the box.
3. Include the following items in the box:
•
•
•
A complete description of symptoms for service personnel (samples of print quality
problems are helpful).
A copy of the sales slip or other proof of purchase to establish the warranty coverage
period.
Your name, address, and a phone number where you can be reached during the day.
183
Pack the device
C
Device specifications
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Physical specifications
Size (width x depth x height)
Device with A4/Letter-size scanner glass and duplexer: 476 x 473 x 258 mm (19.0 x 18.9 x
10.3 inches)
Device weight (including print supplies)
Device with A4/Letter-size scanner glass and duplexer: 8.6 kg (19 lb)
Product features and capacities
Feature
Capacity
Connectivity
•
•
•
USB 2.0-compliant high speed
Wireless 802.11b/g
Wired network
Four print cartridges (black, tri-color print
cartridge, photo, and photo-gray)
Print cartridges
NOTE: Not all print cartridges are supported
in all countries/regions.
Supply yields
information on estimated print cartridge yields.
Device languages
Font support
HP PCL 3
US fonts: CG Times, CG Times Italic,
Universe, Universe Italic, Courier, Courier
Italic, Letter Gothic, Letter Gothic Italic.
184
Device specifications
(continued)
Feature
Capacity
Up to 5000 pages per month
Duty cycle
Device control panel language support
Bulgarian, Croatian, Czech, Danish, Dutch,
English, Finnish, French, German, Greek,
Hungarian, Italian, Japanese, Korean,
Norwegian, Polish, Portuguese, Romanian,
Russian, Simplified Chinese, Slovak,
Slovenian, Spanish, Swedish, Traditional
Chinese, Turkish, Ukrainian.
Language availability varies by country/region.
Processor and memory specifications
Device processor
192 MHz ARM946ES, ETM9 (medium)
Device memory
64 MB built-in RAM, 16 MB built-in MROM + 2 MB built-in Flash ROM
System requirements
NOTE: For the most current information about supported operating systems and system
Operating system compatibility
•
Windows 2000, Windows XP, Windows XP x64, Windows Vista
NOTE: For Windows 2000, only printer drivers, scanner drivers, and the Toolbox are
available.
•
•
Mac OS X (10.3, 10.4)
Linux
Minimum requirements
•
•
•
Windows 2000 Service Pack 4: Intel Pentium II or Celeron processor, 128 MB RAM, 200 MB
free hard disk space, Microsoft Internet Explorer 6.0
Windows XP (32-bit): Intel Pentium II or Celeron processor, 128 MB RAM, 410 MB free hard
disk space, Microsoft Internet Explorer 6.0
Microsoft® Windows® x64: AMD Athlon 64, AMD Opteron, Intel Xeon processor with Intel
EM64T support, or Intel Pentium 4 processor with Intel EM64T support, 128 MB RAM, 200
MB free hard disk space, Microsoft Internet Explorer 6.0
•
•
Windows Vista: 800 MHz 32-bit (x86) or 64-bit (x64) processor, 512 MB RAM, 765 MB free
hard disk space, Microsoft Internet Explorer 7.0
Mac OS X (10.3.9 and higher, 10.4.9 and higher): 400 MHz Power PC G3 (v10.3.9 and
higher, 10.4.9 and higher) or 1.83 GHz Intel Core Duo (10.4.9 and higher), 256 MB memory -
800 MB free hard disk space
•
•
Quick Time 5.0 or later (Mac OS)
Adobe Acrobat Reader 5.0 or later
185
System requirements
Appendix C
Recommended requirements
•
•
•
Windows 2000 Service Pack 4: Intel Pentium III or higher processor, 256 MB RAM, 500 MB
free hard disk space
Windows XP (32-bit): Intel Pentium III or higher processor, 256 MB RAM, 500 MB free hard
disk space
Microsoft® Windows® XP x64: AMD Athlon 64, AMD Opteron, Intel Xeon processor with Intel
EM64T support, or Intel Pentium 4 processor with Intel EM64T support, 256 MB RAM, 500
MB free hard disk space
•
•
Windows Vista: 1 GHz 32-bit (x86) or 64-bit (x64) processor, 1 GB RAM, 1.2 GB free hard
disk space
Mac OS X (10.3.9 and higher, 10.4.9 and higher): 400 MHz Power PC G4 (v10.3.9 and
higher, 10.4.9 and higher) or 1.83 GHz Intel Core Duo (10.4.9 and higher), 256 MB memory -
800 MB free hard disk space
•
Microsoft Internet Explorer 6.0 or later (Windows 2000, Windows XP); Internet Explorer
7.0 or later (Windows Vista)
Network protocol specifications
Network operating system compatibility
•
Windows 2000, Windows XP (32-bit), Windows XP x64 (Professional and Home Editions),
Windows Vista (32-bit) & (64-bit) [Ultimate, Enterprise & Business Edition]
•
•
Mac OS X (10.3, 10.4)
Microsoft Windows 2000 Server Terminal Services with Citrix Metaframe XP with Feature
Release 3
•
•
•
•
•
•
Microsoft Windows 2000 Server Terminal Services with Citrix Presentation Server 4.0
Microsoft Windows 2000 Server Terminal Services
Microsoft Windows 2003 Server Terminal Services
Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.0
Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.5
Microsoft Windows 2003 Server Terminal Services with Citrix Metaframe XP with Feature
Release 3
•
•
Microsoft Windows 2003 Small Business Server Terminal Services
Novell Netware 6, 6.5, Open Enterprise Server 6.5
Compatible network protocols
TCP/IP
Network management
Embedded Web server
Features
Ability to remotely configure and manage network devices
Embedded Web server specifications
Requirements
•
•
A TCP/IP-based network (IPX/SPX-based networks are not supported)
A Web browser (either Microsoft Internet Explorer 5.5 or higher, Opera 8.0 or higher, Mozilla
Firefox 1.0 or higher, or Safari 1.2, or higher)
•
A network connection (you cannot use the embedded Web server connected directly to a
computer with a USB cable)
186
Device specifications
•
•
An Internet connection (required for some features)
NOTE: You can open the embedded Web server without being connected to the
Internet. However, some features will not be available.
It must be on the same side of a firewall as the device.
Print specifications
Black print resolution
Up to 1200 dpi with pigmented black ink
Color print resolution
HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium
Plus photo papers with 1200 x 1200 input dpi)
Copy specifications
•
Digital image processing
•
•
•
•
Up to 100 copies from original (varies by model)
Digital zoom: from 25 to 400% (varies by model)
Fit to page, pre-scan
Copy speeds vary according to the complexity of the document
Mode
Type
Black
Color
Black
Color
Black
Color
Scan resolution (dpi)
up to 600 x 1200
up to 600 x 1200
up to 300 x 300
up to 300 x 300
up to 300 x 300
up to 300 x 300
Best
Normal
Fast
Fax specifications
•
•
•
Walk-up black-and-white and color fax capability.
Up to 110 speed dials (varies by model).
Up to 120-page memory (varies by model, based on ITU-T Test Image #1 at standard
resolution). More complicated pages or higher resolution takes longer and uses more memory.
•
•
•
•
•
•
•
Manual fax send and receive.
Automatic busy redial up to five times (varies by model).
Automatic no-answer redial one time (varies by model).
Confirmation and activity reports.
CCITT/ITU Group 3 fax with Error Correction Mode.
33.6 Kbps transmission.
3 seconds per page speed at 33.6 Kbps (based on ITU-T Test Image #1 at standard
resolution). More complicated pages or higher resolution take longer and use more memory.
•
Ring detect with automatic fax/answering machine switching.
187
Fax specifications
Appendix C
Photo (dpi)
Very Fine (dpi)
Fine (dpi)
Standard (dpi)
Black
Color
196 x 203 (8-bit
grayscale)
300 x 300
196 x 203
196 x 98
200 x 200
200 x 200
200 x 200
200 x 200
Fax to PC Specifications
•
•
Supported file type: Uncompressed TIFF
Supported fax types: black-and-white faxes
Scan specifications
•
•
•
•
•
•
•
•
Image editor included
Integrated OCR software automatically converts scanned text to editable text
Scan speeds vary according to the complexity of the document
Twain-compliant interface
Resolution: 2400 x 4800 ppi optical, up to 19,200 ppi enhanced
Color: 16-bit per RGB color, 48-bit total
Maximum scan size from glass: 216 x 297 mm (8.5 x 11.7 inches)
Maximum scan size from ADF: 216 x 356 mm (8.5 x 14 inches)
Environmental specifications
Operating environment
Operating temperature: 5° to 40° C (41° to 104° F)
Recommended operating conditions: 15° to 32° C (59° to 90° F)
Recommended relative humidity: 25 to 75% noncondensing
Storage environment
Storage temperature: -40° to 60° C (-40° to 140° F)
Storage relative humidity: Up to 90% noncondensing at a temperature of 65° C (150° F)
Electrical specifications
Power supply
Universal power adapter (external)
Power requirements
Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz)
Output voltage: 32 Vdc at 940 mA; 16 Vdc at 625 mA
Power consumption
35 watts printing (Fast Draft Mode); 40 watts copying (Fast Draft Mode)
Acoustic emission specifications (print in Draft mode, noise levels
per ISO 7779)
Sound pressure (bystander position)
LpAd 55 (dBA)
188
Device specifications
Sound power
LwAd 6.9 (BA)
Memory card specifications
•
•
•
Maximum recommended number of files on a memory card: 1,000
Maximum recommended individual file size: 12 megapixel maximum, 8 MB maximum
Maximum recommended memory card size: 1 GB (solid state only)
NOTE: Approaching any of the recommended maximums on a memory card might cause
the performance of the device to be slower than expected.
Supported memory card types
•
•
•
•
•
•
•
•
CompactFlash (Type I and II)
Memory Stick, Memory Stock Duo, Memory Stick Pro, MagicGate Memory Stick Duo
Memory Stick Micro (requires adapter, sold separately)
Secure Digital
High Capacity Secure Digital
miniSD, microSD (requires adapter, sold separately)
MultiMediaCard (MMC), Secure MultiMediaCard
Reduced-Size MultiMmediaCard (RS-MMC), MMC Mobile, MMCmicro (requires adapter, sold
separately)
•
xD-Picture Card
189
Memory card specifications
FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by HP may void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Notice to users in Korea
Notice to users in Korea
191
Appendix D
Notice to users of the U.S. telephone network: FCC requirements
Notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalent
Number (REN) for this equipment. If requested, provide this information to your telephone
company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using
a compatible modular jack which is Part 68 compliant. This equipment connects to the
telephone network through the following standard network interface jack: USOC
RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line might result in failure to ring in response to an incoming call. In most, but not
all, areas the sum of the RENs of all devices should not exceed five (5). To be certain of the
number of devices you may connect to your line, as determined by the REN, you should call
your local telephone company to determine the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company might
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will also be advised of
your right to file a complaint with the FCC. Your telephone company might make changes
in its facilities, equipment, operations, or procedures that could affect the proper operation
of your equipment. If they do, you will be given advance notice so you will have the
opportunity to maintain uninterrupted service. If you experience trouble with this equipment,
please contact the manufacturer, or look elsewhere in this manual, for warranty or repair
information. Your telephone company might ask you to disconnect this equipment from the
network until the problem has been corrected or until you are sure that the equipment is not
malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state public utility commis-
sion, public service commission, or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or making
test calls to emergency numbers:
•
•
Remain on the line and explain to the dispatcher the reason for the call.
Perform such activities in the off-peak hours, such as early morning or late evening.
Note The FCC hearing aid compatibility rules for telephones are not applicable
to this equipment.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including fax machines, to send any message unless
such message clearly contains in a margin at the top or bottom of each transmitted page
or on the first page of transmission, the date and time it is sent and an identification of the
business, other entity, or other individual sending the message and the telephone number
of the sending machine or such business, other entity, or individual. (The telephone number
provided might not be a 900 number or any other number for which charges exceed local
or long-distance transmission charges.) In order to program this information into your fax
machine, you should complete the steps described in the software.
194
Regulatory information
Notice to users of the Canadian telephone network
Note à l’attention des utilisateurs du réseau téléphonique
canadien/Notice to users of the Canadian telephone network
Cet appareil est conforme aux spécifications techniques des équipements terminaux
d’Industrie Canada. Le numéro d’enregistrement atteste de la conformité de l’appareil.
L’abréviation IC qui précède le numéro d’enregistrement indique que l’enregistrement a été
effectué dans le cadre d’une Déclaration de conformité stipulant que les spécifications
techniques d’Industrie Canada ont été respectées. Néanmoins, cette abréviation ne signifie
en aucun cas que l’appareil a été validé par Industrie Canada.
Pour leur propre sécurité, les utilisateurs doivent s’assurer que les prises électriques reliées
à la terre de la source d’alimentation, des lignes téléphoniques et du circuit métallique
d’alimentation en eau sont, le cas échéant, branchées les unes aux autres. Cette précaution
est particulièrement importante dans les zones rurales.
Remarque Le numéro REN (Ringer Equivalence Number) attribué à chaque
appareil terminal fournit une indication sur le nombre maximal de terminaux qui
peuvent être connectés à une interface téléphonique. La terminaison d’une
interface peut se composer de n’importe quelle combinaison d’appareils, à
condition que le total des numéros REN ne dépasse pas 5.
Basé sur les résultats de tests FCC Partie 68, le numéro REN de ce produit est 0.0B.
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation IC before the
registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution might be particularly important in rural areas.
Note The REN (Ringer Equivalence Number) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface might consist
of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
The REN for this product is 0.0B, based on FCC Part 68 test results.
Notice to users of the Canadian telephone network
195
Appendix D
Notice to users in the European Economic Area
Notice to users in the European Economic Area
This product is designed to be connected to the analog Switched Telecommunication
Networks (PSTN) of the European Economic Area (EEA) countries/regions.
Network compatibility depends on customer selected settings, which must be reset to use
the equipment on a telephone network in a country/region other than where the product
was purchased. Contact the vendor or Hewlett-Packard Company if additional product
support is necessary.
This equipment has been certified by the manufacturer in accordance with Directive
1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched
telephone network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the
unlikely event of problems with loop disconnect dialing, it is recommended to use this
equipment only with the DTMF tone dial setting.
Notice to users of the German telephone network
Hinweis für Benutzer des deutschen Telefonnetzwerks
Dieses HP-Fax ist nur für den Anschluss eines analogen Public Switched Telephone Network
(PSTN) gedacht. Schließen Sie den TAE N-Telefonstecker, der im Lieferumfang des
HP All-in-One enthalten ist, an die Wandsteckdose (TAE 6) Code N an. Dieses HP-Fax kann
als einzelnes Gerät und/oder in Verbindung (mit seriellem Anschluss) mit anderen zugelass-
enen Endgeräten verwendet werden.
Australia wired fax statement
In Australia, the HP device must be connected to Telecommunication Network through a line
cord which meets the requirements of the Technical Standard AS/ACIF S008.
196
Regulatory information
Regulatory information for wireless products
This section contains the following regulatory information pertaining to wireless products:
•
•
•
•
•
Exposure to radio frequency radiation
Exposure to radio frequency radiation
Caution The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. This
product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In
order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.
Notice to users in Brazil
Aviso aos usuários no Brasil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção
contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário. (Res.ANATEL 282/2001).
Notice to users in Canada
Notice to users in Canada/Note à l'attention des utilisateurs canadiens
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise
emissions from the digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications. The internal wireless radio complies with RSS
210 and RSS GEN of Industry Canada.
Utiliser à l'intérieur. Le présent appareil numérique n'émet pas de bruit radioélectrique
dépassant les limites applicables aux appareils numériques de la classe B prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada. Le composant RF interne est conforme a la norme RSS-210 and RSS GEN
d'Industrie Canada.
197
Regulatory information for wireless products
European Union regulatory notice
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
•
•
Low Voltage Directive 73/23/EEC
EMC Directive 2004/108/EC
CE compliance of this product is valid only if powered with the correct CE-marked AC
adapter provided by HP.
If this product has telecommunications functionality, it also complies with the essential
requirements of the following EU Directive:
•
R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this
product or product family. This compliance is indicated by the following conformity
marking placed on the product.
The wireless telecommunications functionality of this product may be used in the following
EU and EFTA countries:
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland, and United Kingdom.
Products with 2.4-GHz wireless LAN devices
France
For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This
product may be used indoor for the entire 2400-2483.5 MHz frequency band (channels
1-13). For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used.
For the latest requirements, see http://www.art-telecom.fr.
Italy
License required for use. Verify with your dealer or directly with the General Direction for
Frequency Planning and Management (Direzione Generale Pianificazione e Gestione
Frequenze).
Regulatory model number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRC-0701. This regulatory number should not
be confused with the marketing name (HP Officejet J6400 All-in-One series) or product number.
199
Regulatory model number
Appendix D
Declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name:
Hewlett-Packard Company
DoC#: SNPRC-0701- B
Supplier’s Address:
60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502
declares, that the product
Product Name:
Regulatory Model Number:1)
HP Officejet J6400 series
SNPRC-0701
All
Product Options:
Radio Module Number:
RSVLD-0608
conforms to the following Product Specifications and Regulations:
IEC 60950-1:2001 / EN60950-1:2001
EN 60825-1 1994+A1:2002+A2: 2001
SAFETY:
CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EMC:
EN 61000-3-3:1995 +A1: 2001
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
EN 301 489-1 V1.4.1:2002 / EN 301 489-17 V1.2.1:2002
EN 300 328 V1.6.1:2004-11
TELECOM:
HEALTH:
TBR 21: 19983)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
EU: 1999/519/EC
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC
& the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.
3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,
clause 4.7.1.
4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
5. The product was tested in a typical configuration.
Singapore
18 July 2007
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
200
Regulatory information
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been
kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have
been designed to separate easily. Fasteners and other connections are easy to locate, access,
and remove using common tools. High priority parts have been designed to access quickly for
efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at:
This section contains the following topics:
•
•
•
•
•
•
•
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at:
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/
regions, and partners with some of the largest electronic recycling centers throughout the world.
HP conserves resources by reselling some of its most popular products. For more information
regarding recycling of HP products, please visit:
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges
free of charge. For more information, go to the following Web site:
201
Environmental product stewardship program
Appendix D
Disposal of waste equipment by users in private households in the European Union
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer
que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter
votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.
Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei
den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.
Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo
smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio
separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate
nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza,
il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.
Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es
responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos
en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los
lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la
tienda donde adquirió el producto.
Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé
zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným
sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete
vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt
zakoupili.
Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr
ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på
tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere
om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.
Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur
af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte
apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over
waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product
hebt aangeschaft.
Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete
utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme
ostsite.
Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite
toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös,
että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen
jälleenmyyjältä.
Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.
A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata,
hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az
egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon
a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.
Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces,
to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde
palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var
nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.
Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją
į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga
yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio
atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za
dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów
przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można
uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.
Descarte de equipamentos por usuários em residências da União Européia
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos
a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do
descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais
informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que
adquiriu o produto.
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom
mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a
zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade,
vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem
mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili,
da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini,
v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation
för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både
människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar
kasserade produkter för återvinning.
Изхвърляне на оборудване за отпадъци от потребители в частни домакинства в Европейския съюз
Този символ върху продукта или опаковката му показва, чепродуктът не трябва да се изхвърля заедно с домакинските отпадъци. Вие имате отговорността да изхвърлите
оборудването за отпадъци, като го предадете на определен пункт за рециклиране на електрическо или механично оборудване за отпадъци. Отделното събиране и рециклиране
на оборудването за отпадъци при изхвърлянето му помага за запазването на природни ресурси и гарантира рециклиране, извършено така, чеда не застрашава човешкото
здраве и околната среда. За повече информация къде можете да оставите оборудването за отпадъци за рециклиране се свържете със съответния офис в града ви, фирмата за
събиране на отпадъци или смагазина, от който сте закупили продукта
Înlăturarea echipamentelor uzate de către utilizatorii casnici din Uniunea Europeană
Acest simbol de pe produs sau de pe ambalajul produsului indică faptul că acest produs nu trebuie aruncat alături de celelalte deşeuri casnice. În loc să procedaţi astfel, aveţi
responsabilitatea să vă debarasaţi de echipamentul uzat predându-l la un centru de colectare desemnat pentru reciclarea deşeurilor electrice şi aechipamentelor electronice.
Colectarea şi reciclarea separată aechipamentului uzat atunci când doriţi să îl aruncaţi ajută la conservarea resurselor naturale şi asigură reciclarea echipamentului într-o manieră care
protejează sănătatea umană şi mediul. Pentru informaţii suplimentare despre locul în care se poate preda echipamentul uzat pentru reciclare, luaţi legătura cu primăria locală, cu
serviciul de salubritate sau cu vânzătorul de la care aţi achiziţionat produsul.
202
Regulatory information
Energy Star® notice
This product is designed to reduce power consumption and save natural resources without
compromising product performance. It has been designed to reduce total energy consumption
both during operation and when the device is not active. This product qualifies for ENERGY
STAR® which is a voluntary program established to encourage the development of energy-
efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR
partner, HP has determined that this product meets ENERGY STAR guidelines for energy
efficiency.
For more information on ENERGY STAR guidelines, go to the following Web site:
203
Environmental product stewardship program
Index
feeding problems,
troubleshoot 131
cards
Symbols/Numerics
(ADF) automatic document
feeder
sizes supported 23
tray supporting 24
clean
feeding problems,
troubleshoot 131
10 x 15 cm photo paper
4 x 6 inch photo paper
automatic document
print cartridge ink nozzle
B
backup fax reception 58
best copy quality 38
black and white pages
A
color
troubleshoot 141
black dots or streaks,
troubleshoot
accessories
colored text, and OCR 44
colors
self-test report 78
acoustic emissions 188
Add Printer installation 110
ADF
ADF (automatic document
feeder)
administrator
blank pages, troubleshoot
print black and white,
troubleshoot 141
blocked fax numbers
device control panel
CompactFlash memory card
ADSL, fax setup with
after the support period 177
align print cartridges 124
answer ring pattern
answering machine
set up with fax (parallel
set up with fax and
borderless printing
Mac OS 29
computer modem
shared with fax (parallel
shared with fax and
answering machine
(parallel phone
Windows 28
both sides, print on 34
broadcast faxing
systems) 100
shared with fax and voice
line (parallel phone
systems) 95
shared with fax and voice
mail (parallel phone
systems) 104
C
cameras
cancel
Auto Answer button 13
automatic document feeder
(ADF)
print job 35
confirmation reports, fax 70
connections
features available 13
contrast, fax 56
Cancel button 12
capacity
204
Index
control panel
faceplate, removing 179
E
ECM. See error correction mode
edit
copy
text in OCR program 44
embedded Web server
from the device control
legal to letter 39
send scans to programs 43
dial type, setting 67
dial-up modem
paper types,
photos, enhance 40
envelopes
shared with fax (parallel
shared with fax and
answering machine
(parallel phone sy
anstems) 100
shared with fax and voice
line (parallel phone
systems) 95
tray supporting 24
environmental
specifications 188
environmental sustainability
text, enhance 40
correct port test, fax 153
custom-sized media
error correction mode 56
error messages
shared with fax and voice
mail (parallel phone
systems) 104
device control panel 16
unable to activate TWAIN
digital cameras
error-correction mode, fax 67
EWS. See embedded Web
server
insert memory cards 46
distinctive ringing
DOC 200
documentation 9
dots or streaks, troubleshoot
dots per inch (dpi)
dots, troubleshoot
driver
DSL, fax setup with
duplexer
customer support
phone support 175
cut-off pages, troubleshoot 138
F
faded copies 145
faded stripes on copies,
troubleshoot 146
fast copy quality 38
fax
D
dark images, troubleshoot
darken
Declaration of Conformity
default settings
answering machine and
modem, shared with
(parallel phone
answering machine
answering machine, set up
(parallel phone
clear jams 169
device control panel 16
backup fax reception 58
confirmation reports 70
device control panel
205
redial options 67
rings to answer 66
send to multiple
send, troubleshoot 157,
separate line setup (parallel
graphics
incompletely filled on
darken or lighten 56
default settings 56
distinctive ringing setup
(parallel phone
systems) 89
distinctive ringing, change
DSL, set up (parallel phone
systems) 88
error correction mode 56
error reports 70
Fax Menu button 13
Fax to PC 63
ISDN line, set up (parallel
line condition test, failed 156
ink not filling in 141
look different from original
missing lines or dots 143
groups, speed-dial
H
header, fax 65
see also customer support
Help button 12
Hewlett-Packard Company
notices 3
HP Photosmart Software
send scans to programs 43
HP Photosmart Studio
send scans to programs 43
HP Printer Utility (Mac OS)
shared phone line setup
(parallel phone
systems) 90
specifications 187
modem and answering
machine, shared with
(parallel phone
speed-dial entries, set up 30
speed-dial groups, set up 30
humidity specifications 188
I
systems) 100
troubleshoot 151
voice mail, set up (parallel
wall jack test, failed 152
Fax Menu button 13
Fax to PC
firewalls, troubleshoot 136
index sheets
modem and voice line,
shared with (parallel
modem and voice mail,
shared with (parallel
modem, shared with
(parallel phone
systems) 92
monitor dialing 51, 53
PBX system, set up
(parallel phone
systems) 89
phone cord connection test,
phone cord too short 162
phone cord type test,
ink smearing, troubleshoot 140
installation
Add Printer, Windows 110
software for Mac OS 110
software for Windows 106
Windows network
forwarding faxes 60
Internet
fax, using 68
IP settings 82
ISDN line, set up with fax
G
glass, scanner
grainy or white bands on
copies, troubleshoot 146
J
jams
media to avoid 21
206
Index
jobs
manual faxing
shared with fax and voice
line (parallel phone
Junk Fax Blocker button 13
margins
media
shared with fax and voice
mail (parallel phone
K
clear jams 169
monitoring tools 73
multi-feeds, troubleshoot 144
keypad, device control panel
HP, order 172
L
N
language, printer 184, 185
legal paper
networks
advanced settings 81
firewalls, troubleshoot 136
supported sizes 22
types and weights
letter paper
light images, troubleshoot
lighten
lights, control panel 12
line condition test, fax 156
lines
operating systems
memory
protocols supported 186
sharing, Windows 108
view and printsettings 81
wireless communication
memory cards
copies, troubleshoot 146
print DPOF files 47
save photos to computer 48
scan to 43
load
tray 1 26
log, fax
Wireless Setup Wizard 81
normal copy quality 38
Memory Stick cards
menus, device control panel 15
missing lines or dots,
troubleshoot 143
missing or incorrect
MMC memory card
M
Mac OS
O
OCR
HP Printer Utility 76
print on special, or custom-
edit scanned documents 44
operating environment
specifications 188
operating systems
originals
output tray
model number 78
modem
wireless communication
shared with fax (parallel
shared with fax and
answering machine
(parallel phone
maintenance
replace print cartridges 121
systems) 100
207
photo media
Photo Menu button 13
photo paper
supported 120, 172, 184
P
packing the device 182
pages per month (duty
cycle) 185
photos
print driver
borderless printing 28
edit scans 44
print from DPOF files 47
save to computer 48
troubleshoot memory
print quality
print-carriage access door,
paper
legal to letter copy 39
recommended copy
size, set for fax 61
paper size
printer driver
pulse dialing 67
paper-feed problems,
troubleshoot 143
parallel phone systems
answering machine
Photosmart Software
send scans to programs 43
Photosmart Studio
send scans to programs 43
poll to receive fax 59
ports, specifications 184
power
specifications 188
troubleshoot 135
print
Q
distinctive ringing setup 89
quality, copy 38
quality, troubleshoot
modem and answering
modem and voice mail
modem shared with voice
separate line setup 87
R
radio interference
radio, turn off 81
rear access panel
clear jams 169
receive faxes
fax reports 69
shared line setup 90
PBX system, set up with fax
PCL 3 support 184
phone cord
blocking numbers 61
connected to correct port
correct type test failed 154
troubleshoot 135
print cartridge door, locating 11
print cartridge latch, locating 11
print cartridges
phone line, answer ring
phone support 175
phone support period
period for support 176
phone, fax from
rings to answer 66
recycle
redial options, setting 67
reduce/enlarge copies
resize to fit letter 39
resize to fit letter or A4 39
order online 172
208
Index
release notes 9
remove print cartridges 180
replace print cartridges 121
reports
security
self-test diagnostic page
connection types 13
distinctive ringing 66
distinctive ringing (parallel
phone systems) 89
DSL (parallel phone
error, fax 70
fax test failed 151
reprint
send faxes
color fax 54
fax scenarios 84
fax, with parallel phone
resolution
monitor dialing 51, 53
ISDN line (parallel phone
PBX system (parallel
phone systems) 89
separate fax line (parallel
phone systems) 87
shared phone line (parallel
phone systems) 90
voice mail (parallel phone
voice mail and computer
modem (parallel phone
Resolution button 13
resolution, fax 55
send scans
rings to answer 66
serial phone systems
Services tab, Toolbox
settings
S
save
default settings 16
faxes in memory 58
scan
Windows networks 108
Setup button 12
sharing 14
sharing device
control panel 16
speed, fax 67
error messages 149
from a TWAIN- or WIA-
compliant program 43
size
skew, troubleshoot
software
scan specifications 188
Scan To button 12
send to a program 43
setup
answering machine
(parallel phone
systems) 99
answering machine and
modem (parallel phone
systems) 100
computer modem (parallel
computer modem and
answering machine
(parallel phone
systems) 100
computer modem and
voice line (parallel phone
systems) 95
Start Color Photo button 12
Start Color Scan button 12
to memory card 43
connection types 13
HP Photosmart 17
installation on Mac OS 110
uninstall from Mac OS 118
Scan To button 12
scanner glass
load originals 19
schedule fax 52
Secure Digital memory card
computer modem and
voice mail (parallel
209
specifications
memory card
clear jams 169
network protocols 186
specifications 189
telephone customer support 175
telephone line, answer ring
pattern 66
paper guides illustration 10
troubleshoot
processor and memory 185
telephone, fax from
answering machines 162
speed
troubleshoot for
temperature specifications 188
tests, fax
cut-off pages, incorrect text
or graphics
speed dial
fax line condition 156
fax phone cord type test
failed 154
placement 138
device control-panel
one-touch buttons 13
send fax 50
fax hardware test failed 152
fax line test failed 156
fax phone cord connection
fax phone cord type test
fax wall jack test, failed 152
ink not filling text or
ink smearing 140
meaningless characters
telephone wall jack 152
text
Start Color Photo button 12
Start Color Scan button 12
Start Copy buttons
status
cannot be edited after
scan, troubleshoot 149
incompletely filled on
network configuration
self-test report 78
missing from scan,
troubleshoot 148
splotchy on copies 146
troubleshoot 138, 141, 143
unclear on copies,
troubleshoot 146
unclear scans 151
tone dialing 67
storage environment
specifications 188
streaks, troubleshoot
Toolbox (Windows)
media not picked up from
stripes on scans,
troubleshoot 150
subscriber identification code 65
supplies
administrator settings 73
Estimated Ink Level tab 74
memory cards 166
missing lines or dots 143
missing or incorrect
Services tab 75
order online 172
self-test report 78
transparencies
tray
multiple pages are
network configuration
support. See customer support
support process 175
media types and weights
paper-feed problems 143
tray 1
print quality 138
trays
T
technical information
copy specifications 187
210
Index
supply yield data sheet 184
Webscan 43
white bands or stripes,
troubleshoot
self-test diagnostic page 77
send faxes 157, 159, 161
TWAIN
WIA (Windows Image
Application), scan from 43
Windows
scan from 43
unable to activate
HP Solution Center 17
print on special or custom-
U
uninstall software
USB connection
print settings 33
set up wireless
Windows Image Application
wireless communication
Ethernet setup 114
V
vertical stripes on copies,
troubleshoot 146
view
network settings 81
reducing interference 116
voice mail
set up with fax (parallel
phone systems) 91
set up with fax and
computer modem
(parallel phone
turn off 115
voltage specifications 188
X
W
xD-Picture memory card
wall jack test, fax 152
Web sites
accessibility information 3
environmental
order supplies and
211
212
© 2008 Hewlett-Packard Development Company, L.P.
www.hp.com/support
|