Start Here
®
Epson Stylus CX7000F Series
1
Unpack
If anything is missing, contact Epson® as described on the back in
“Any Questions?”.
1
Remove all the tape on the outside.
2
3
Lift up the scanner.
Remove the tape from the ink cartridge holder.
4
Close the scanner.
*410923300*
2
Turn On the CX7000F Series
1
Connect the power cable.
2
Press the
On button.
3
You see Region on the display screen. Press the
Start Color/OK button.
4
5
6
You see USA. Press the
You see Date/Time. Press the
Use the number keys to enter the month, day, and year.
Start Color/OK button.
Start Color/OK button.
Press the Start Color/OK button.
7
Use the number keys to enter the hour and minutes.
Press the Start Color/OK button.
8
9
Press 1 to select AM or press 2 to select PM.
You see No Cyan Magenta Yellow Black. Press the
Start Color/OK button.
3
Install Ink Cartridges
Caution: Do not open ink cartridge packages until you are ready to install
the ink. The ink cartridges are vacuum packed to maintain reliability.
Note: Don’t load paper before installing the ink cartridges.
1
Lift up the scanner.
2
3
Open the ink cartridge cover.
Shake the ink cartridges, then unpack them.
4
Remove the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
5
Insert the cartridges in the holder for each color.
6
7
8
Press the cartridges down until they click.
Close the ink cartridge cover and press it down until it clicks.
Close the scanner.
9
Press the
Start Color/OK button to charge ink. Charging takes
about 2 minutes.
Caution: Don’t turn off the CX7000F Series while Charging appears
on the display screen.
Note: The first time you install ink cartridges, the printer uses some
ink to charge the printing system, so print yields may be lower with
the first cartridges. Subsequent ink cartridges will last their full rated
life.
4
Load Paper
1
Open the paper support and pull up its extensions.
Paper support
2
Open the output tray and pull out its extension.
Output tray
3
4
Flip the feeder guard forward.
Load paper against the right edge guide.
Letter
4 x 6 or 5 x 7
Note: Don’t load the paper sideways;
always load it short edge first.
5
Slide the left edge guide over.
6
Flip the feeder guard back.
5
Install Software
Your software works with Windows® 98SE, Me, 2000, XP, XP Professional
x64 Edition, and Windows Vista™, and Macintosh® OS X 10.2.8, 10.3.9 to 10.4.x.
Windows
1
Make sure the CX7000F Series is NOT CONNECTED to your computer.
Note: If you see a screen like this, click Cancel and disconnect the
USB cable. You can’t install your software that way.
2
3
Insert the CX7000F Series CD.
With Windows 98SE, Me, 2000 or XP,
go to step 4.
With Windows Vista, go to step 3.
With Windows Vista, if you see this
screen, click Run EPSETUP.EXE.
Then click Continue at the User Account
Control screen.
4
5
Click Install and follow the
on-screen instructions to
install software
and print a test page.
Software installation takes
several minutes.
When prompted, connect the USB cable to the computer first. Then
connect the cable to the printer.
Note: If installation doesn’t continue after a moment, make sure you
securely connected and turned on the CX7000F Series.
6
When you’re done, remove the CD.
You’re ready to copy, print, and scan! See the Basics Guide or your on-screen
User’s Guide.
Macintosh
1
Insert the CX7000F Series CD.
2
3
Open the Epson CD-ROM desktop icon and double-click
the Epson icon.
Click Install and follow the on-screen instructions to install your drivers.
Software installation and setup take several minutes. If necessary, close
any open windows on your screen to return to the installer.
4
When prompted, connect the USB cable to the computer first. Then
connect the cable to the printer. Make sure the CX7000F Series is
turned on.
5
When you see this screen, click Open the Printer List.
6
Follow the instructions to the right to add the printer.
Instructions
7
8
Click Next again, if necessary.
Follow the on-screen instructions to install the rest of the software and
print a test page.
9
When you’re done, eject the CD.
You’re ready to copy, print, and scan! See the Basics Guide or your on-screen
User’s Guide.
6
Connect the Phone Line
If you are going to connect a dedicated phone line to the CX7000F Series for
faxing, connect it as shown here.
If you want to connect a telephone or answering machine, see the
Basics Guide for instructions.
Connect the phone cable leading from your telephone wall jack to the LINE
port on the back of the CX7000F Series.
Note: If you connected the CX7000F Series to a DSL phone line, you must
install a DSL filter to the line or you won’t be able to fax. Contact your DSL
provider for the necessary filter.
Any Problems?
On light
Display screen
Start Color/OK button
• If you see a Paper out message on the display, reload paper and press
the
Start Color/OK button to continue.
• If you see a No ink cartridge message on the display, an ink cartridge
may be installed incorrectly. Press the Start Color/OK button, then
open the scanner and push down the cartridges and cartridge cover all
the way. See section 3 on the front of this sheet for instructions.
• If you see a Paper jam message on the display, press the
Start Color/OK button to eject the paper, then pull out the jammed
sheets from the sheet feeder or output tray. See the Basics Guide for
details.
See your Basics Guide and on-screen User’s Guide for more problem-solving
information.
Any Questions?
Look here for answers:
Basics Guide
Basic steps for using the CX7000F Series.
On-screen User’s Guide
Click the desktop shortcut for easy access to CX7000F Series information.
On-screen help with your software
Select Help or ? when you’re using your software.
Epson Technical Support
Internet Support
Visit Epson’s support website at epson.com/support and select your
product for solutions to common problems. You can download drivers and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Speak to a Support Representative
Before you call Epson for support, please have the following
information ready:
• Product name (Epson Stylus CX7000F Series all-in-one)
• Product serial number (located on the label in back)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer configuration
• Description of the problem
Then call:
• U.S.: (562) 276-4382, 6 AM to 6 PM, Pacific Time, Monday through Friday
• Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday
Toll or long distance charges may apply.
Software Technical Support
™
ArcSoft PhotoImpression
(510) 440-9901
ABBYY® FineReader® Sprint Plus
(510) 226-6717
E-mail: [email protected]
Website: abbyyusa.com/support
E-mail: [email protected]
Need Paper and Ink?
For the best prints and copies, use genuine Epson paper and ink. You can
(Canadian sales). You can also purchase genuine Epson paper and ink from
an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766).
Epson Premium Photo Paper Glossy
Heavyweight paper with a high gloss
finish for beautiful photographs in
a variety of sizes, with borders or
borderless.
Genuine Epson Inks
Look for the numbers below to find your cartridges.
It’s as easy as remembering your number!
69 Black T069120
69 Cyan T069220
69 Magenta T069320
69 Yellow T069420
Try the High Capacity 68 Black cartridge available at
www.epson.com/highcapacity (U.S. sales) or
www.epson.ca (Canadian sales).
Epson and Epson Stylus are registered trademarks and Exceed Your Vision is a trademark of
Seiko Epson Corporation. DURABrite is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2007 Epson America, Inc. 1/07
CPD-22471R1
Cut out the card to the
right and keep it with
you when purchasing
replacement ink
®
Epson CX7000F Ink Cartridges
High Capacity 68 Black cartridges are also available at
www.epson.com/highcapacity (U.S. sales)
cartridges.
69 Black T069120
69 Cyan T069220
69 Magenta T069320
69 Yellow T069420
Printed in XXXXXX XX.XX-XX XXX
|