Canon PIXMA MP130 User Manual

Quick Start Guide  
Table of Contents  
7
12  
15  
21  
23  
24  
26  
Introduction  
Copying  
Photo Printing From A Memory Card (MP130)  
Printing from Your Computer  
Scanning  
Maintenance  
Troubleshooting  
HT7-0124-000-V.1.0  
ENG  
Copyright  
This manual is copyrighted by Canon Inc. with all rights reserved. Under the copyright laws, this manual may  
not be reproduced in any form, in whole or in part, without the prior written consent of Canon Inc.  
© 2004 Canon Inc.  
Disclaimer  
Canon Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon  
MP130/110 Series. All statements, technical information and recommendations in this manual and in any guides  
or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or  
warranted, and they are not intended to be, nor should they be understood to be, representation or warranties  
concerning the products described. Specifications are subject to change without notice.  
®
As an ENERGY STAR partner, Canon Inc. has determined that this product meets  
®
the ENERGY STAR guidelines for energy efficiency.  
Exif Print  
This machine supports Exif 2.2 (also called “Exif Print”).  
Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting  
to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized,  
yielding extremely high quality prints.  
Trademarks  
· Canon is a registered trademark.  
· ScanGear is a registered trademark of Canon Inc.  
· PIXMA is a trademark of Canon Inc.  
®
®
· Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.  
· Macintosh, Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.  
®
· CompactFlash is a registered trademark of SanDisk Corporation.  
®
®
· MEMORY STICK and Memory Stick DUO are registered trademark of Sony Corporation.  
· miniSD is a registered trademark of SD Card Association.  
®
· SmartMedia is a registered trademark of Toshiba Corporation.  
®
· Microdrive is a registered trademark of International Business Machines Corporation.  
· MultiMediaCard is a trademark of the MultiMediaCard Association.  
· xD-Picture Card is a trademark of Fuji Photo Film Corporation.  
· SD Secure Digital is a trademark of Toshiba Corporation.  
· All other product and brand names are registered trademarks or trademarks of their respective owners.  
This equipment conforms with the essential requirements of EC Directive  
1999/5/EC. We declare that this product conforms with the EMC  
requirements of EC Directive 1999/5/EC at nominal mains input 230 V,  
50 Hz although the rated input of the product is 200 V–240 V, 50/60 Hz.  
If you move to another EU country and are experiencing trouble, please call  
the Canon Help Desk.  
(For Europe Only)  
Model Name  
· H12440 (PIXMA MP130/110)  
2
X How To Use The Documentation Provided  
Easy Setup Instructions  
Be sure to read this sheet first.  
(Printed documentation)  
This sheet includes instructions for setting up your machine  
and getting it ready for use. Follow all steps in this sheet  
before using your machine.  
Quick Start Guide  
(This guide)  
Read this guide when starting to use the machine.  
After following instructions in the Easy Setup Instructions,  
we recommend you read this guide to familiarize yourself  
with the basic operation of all functions that can be performed  
from your machine.  
User’s Guide  
This guide is available on the Setup CD-ROM.  
(Electronic documentation)  
This guide, included as a HTML file on the Setup CD-ROM,  
includes instructions on printing from your computer, direct  
photo printing from memory cards, and copying. Refer to this  
guide for in-depth instructions not included in the Quick Start  
Guide, or if you want to learn more about advanced features.  
To read this manual, double-click the icon appeared on your  
computer after installing the drivers.  
This guide contains the following information:  
• Machine parts and their  
functions  
• Document and paper  
handling  
• Copying  
• Direct printing from a  
memory card  
• Printing from a computer  
• Routine maintenance  
• Troubleshooting  
• Specifications  
Software Guide  
(Electronic documentation)  
This guide is available on the Setup CD-ROM.  
Refer to this guide for full instructions on printing and  
scanning from your computer. This guide, included as a  
HTML file on the Setup CD-ROM, describes details of each  
function, as well as the methods of use of the MP Drivers and  
MP Navigator.  
3
Photo Application Guide  
(Electronic documentation)  
This guide is available on the Setup CD-ROM.  
This guide, included as a HTML file, describes the utility  
software on the Setup CD-ROM, such as Easy-PhotoPrint and  
Easy-WebPrint, including instructions on how to scan data,  
various printing methods, and details of functions. Like the  
Software Guide, this guide is also included on the Setup  
CD-ROM.  
X How To Read The HTML Manuals  
Various Web browsers are available for seeing HTML view and therefore the same text  
or image may appear different depending on the browser you use. The HTML manuals  
have been prepared on the assumption that it would be displayed and read under the  
following conditions:  
®
• Web browser: Microsoft Internet Explorer 5.0 or later  
• Web browser screen: Full screen  
• Resolution of display (Desktop): 800 × 600 pixels or above  
• Color amount of display: 16 bit or more  
®
• Web browser: Microsoft Internet Explorer 5.0 or later, Safari 1.0 or later  
• Web browser screen: Full screen  
• Resolution of display (Desktop): 800 × 600 pixels or above  
• Color amount of display: 32,000 or more  
• We recommend you use Safari as your browser to view the HTML manuals on  
Macintosh. If you don’t have Safari, download it on Apple Computer Inc.’s homepage  
and install it.  
4
X Reading The Document  
Symbols Used In This Guide  
CAUTION  
Indicates a caution concerning operations that may lead to  
injury to persons or damage to property if not performed  
correctly. In order to use the machine safely, always pay  
attention to these cautions.  
See User’s Guide  
Refer to the User’s Guide (included on your Setup CD-ROM) for  
more information.  
See Software Guide  
Refer to the Software Guide (included on your Setup CD-ROM) for  
more information.  
(See page nn)  
Indicates a page number where additional information can be found.  
Indicates the description of the machine when connected to a  
computer.  
PC  
Read this when the machine is connected to a Windows system.  
Read this when the machine is connected to a Macintosh system.  
z (Operation branch title) Used for an operation that can be performed in branch procedures.  
1. (Operation branch-step) Used to explain each operation of a branch procedure.  
5
Buttons Used In This Guide  
[button name]  
Text enclosed in these brackets indicates a button on the Operation Panel  
of the machine or an item on the computer to be manipulated.  
Example: [Color]  
<message>  
Text enclosed in these brackets indicates a message or selectable menu  
item which appears on the LCD (Liquid Crystal Display).  
Example: <PH PRO>, <OFF>  
Terms Used In This Guide  
machine  
default  
General term used to represent the MP130/110.  
A setting that remains in effect unless you change it.  
document  
The original sheets of paper, pages of a book, or photographs you copy,  
or scan with the machine.  
paper  
menu  
Paper on which you can print with the machine.  
A list of settings from which you select an item to set up or change. A  
menu has a title which appears on the LCD.  
Term that indicates selecting a command or option on your computer,  
generally with a mouse.  
click, double-click  
PC  
PC  
Term that indicates clicking the right button of a mouse.  
right-click  
/(Slash)  
Used when consecutively listing OS or model names. For example,  
“Windows 2000/XP” indicates “Windows 2000” and “Windows XP.”  
6
1 Introduction  
X Features Of Your Machine  
Thank you for purchasing the Canon MP130/110. Your machine incorporates the  
following functions in one simple-to-operate device:  
Desktop photo printer  
(MP130)  
Prints photo-quality images from any memory card, without  
using a computer.  
Copier  
Makes color or black & white copies. Also, applies advanced  
copy features to your copies.  
Printer  
Prints photographs, vivid color and crisp black and white  
documents from your computer.  
PC  
Scanner  
Scans high-resolution images to your computer and processes  
them easily using the utility software supplied.  
PC  
You may select to use your machine as a stand-alone device for copying, and photo  
printing*. Alternatively, connect your machine to a computer and you will have a fully  
integrated desktop printer/copier/scanner. The utility software supplied with your  
machine enables you to perform a variety of tasks from your computer effortlessly and  
efficiently.  
* MP130  
Chapter 1  
Introduction  
7
X Main Components And Their Functions  
Machine  
z Exterior  
(1)  
(3)  
(6)  
(7)  
(2)  
(5)  
(4)  
(1) Paper Support  
Supports paper loaded in the Auto Sheet Feeder. Open it before loading paper.  
(2) Paper Support Extension  
Supports paper loaded in the Auto Sheet Feeder. Pull it out before loading paper.  
(3) Auto Sheet Feeder  
Load paper here. Paper feeds automatically, one sheet at a time.  
(4) Paper Output Tray  
Printouts are output to this tray. Open the tray before you start copying or printing. When not being  
used, keep it closed in the machine.  
(5) Operation Panel  
Displays the operating status of the machine. It is also used to change or check the settings of each  
function. For details, see page 10.  
(6) Document Cover  
Covers the Platen Glass. Open this cover when loading a document on the Platen Glass.  
(7) Platen Glass  
Used to load a document to be processed.  
8
Introduction  
Chapter 1  
z Rear view and interior  
(10)  
(9)  
(8)  
(14) (13)  
(12) (11)  
(8) USB Connector  
Used to connect a computer to the machine when printing from or scanning to the computer.  
(9) Power Connector  
Used to connect the power cord to the machine.  
(10) Scan Unit  
Lift this unit until it locks into place when the Inner Cover needs to be opened.  
(11) Print Head Holder  
Used to install a print head.  
(12) Inner Cover  
Open this cover when replacing the ink tanks or clearing a paper jam.  
CAUTION  
• Printing with the Inner Cover open may result in injury.  
(13) Access Lamp*  
Lights when a memory card is inserted into the Card Slots. This lamp flashes while the machine is  
reading data from the memory card.  
(14) Card Slots*  
Insert a memory card or card adapter containing a memory card into these slots when photo printing.  
The machine is equipped with two kinds of Card Slots.  
* MP130  
Chapter 1  
Introduction  
9
Operation Panel  
(1)  
(2)  
(3)  
(4)  
(5)  
(6)  
(7)  
(8)  
(9)  
(13)  
(12)  
(11)  
(10)  
(1) [Photo Index Sheet]* Button  
Switches the machine to Photo Index Sheet mode.  
(2) [COPY] Button  
Switches the machine to copy mode.  
(3) [SCAN] Button  
Switches the machine to scan mode. In scan mode, the machine scans a document to your computer  
according to the settings selected. This button is used when the machine is connected to a computer.  
(4) [PHOTO]* Button  
Switches the machine to photo print mode.  
(5) LCD (Liquid Crystal Display)  
Displays messages, menu selections, and the operation status.  
(6) [Black] Button  
Starts black & white copying or scanning.  
(7) [Color] Button  
Starts color copying or scanning.  
(8) [Stop/Reset] Button  
Cancels operations and returns the machine to standby mode.  
10  
Introduction  
Chapter 1  
 
(9) [ON/OFF] Button  
Turns the machine ON and OFF. Before turning ON the machine, make sure the Document Cover is  
closed.  
(10) Alarm Lamp  
Flashes when the machine is turned ON or OFF, when an error occurs, or when paper or ink has run  
out.  
(11) [OK] Button  
Selects or confirms settings. Also, press this button to return to standby mode after correcting paper  
jams and other errors that stop printing.  
(12) [W (–)] and [(+) X] Buttons  
Scroll through menu selections, and increase or decrease the number of copies or the image file  
number.  
(13) [Menu] Button  
Accesses the settings to customize operation of your machine.  
* MP130  
Chapter 1  
Introduction  
11  
2 Copying  
X Loading Documents  
1 Lift the Document Cover.  
2 Load your document.  
• Place your document face down on the Platen  
Glass.  
• Align the upper left corner of your document  
with the alignment mark on the lower right  
corner of the Platen Glass.  
3 Gently close the Document Cover.  
X Setting The Paper Size And Type  
For copying or photo printing, on the Operation Panel, you need to set the size and type  
of paper loaded in the Auto Sheet Feeder. (See page 13)  
1 Press [COPY].  
2 Press [Menu] twice until <PAPER SIZE>appears.  
3 Use [W] or [X] to select the paper size, and then press [OK].  
4 Use [W] or [X] to select the paper type, and then press [OK].  
12  
Copying  
Chapter 2  
 
X Recommended Paper  
• Plain paper  
• Envelopes  
• High Resolution Paper*  
• Glossy Photo Paper*  
• Matte Photo Paper*  
• Photo Paper Pro*  
• Photo Paper Plus Glossy*  
• Photo Paper Plus Semi-Gloss*  
• Transparencies*  
• T-Shirt Transfers*  
* Indicates Canon specialty media.  
For details on the general paper guidelines, see User’s Guide.  
X Loading Paper  
1 Open the Paper Support (1), then pull  
out the Paper Support Extension (2).  
(1)  
(2)  
2 Place a stack of paper (print side  
up) in the Auto Sheet Feeder (1),  
and pinch the Paper Guide (A) and  
adjust it to the left side of the stack  
(1)  
(2)  
(2).  
• Make sure the stack does not exceed the Paper  
Limit Mark (B).  
• For details on loading paper, see User’s  
Guide.  
(B)  
(A)  
Chapter 2  
Copying  
13  
   
X Making Copies  
1 Press [COPY].  
2 Use [W] or [X] to select the number of copies (max. 99 copies).  
3 Adjust the settings for your document as necessary.  
4 Press [Color] for color copying, or [Black] for black & white copying.  
Adjusting Image Quality  
1 Press [Menu] five times until <IMAGE QUALITY> appears.  
2 Use [W] or [X] to select the image quality, and then press [OK].  
Adjusting Exposure (Density)  
1 Press [Menu] four times until <DENSITY> appears.  
2 Use [W] or [X] to select the exposure, and then press [OK].  
Reducing Or Enlarging A Copy (Using Preset Copy Ratios)  
1 Press [Menu] once until <ENLARGE/REDUCE> appears, and then press  
[OK].  
2 Use [W] or [X] to select the copy ratio, and then press [OK].  
Reducing Or Enlarging A Copy (Using Custom Copy Ratios)  
1 Press [Menu] once until <ENLARGE/REDUCE> appears.  
2 Use [W] or [X] to select <ZOOM>, and then press [OK].  
3 Use [W] or [X] to select a copy ratio between 25% and 400%, and then  
press [OK].  
Advanced Copy Feature  
Borderless copying  
Copies color images so that they fill the entire page without borders.  
For details on Borderless copying, see User’s Guide.  
14  
Copying  
Chapter 2  
3 Photo Printing From A Memory Card  
(MP130)  
There are several ways you can print photos directly from a memory card, without using  
a computer.  
1 Make sure the machine is turned ON.  
2 Load paper into the Auto Sheet Feeder. (See page 13)  
3 Insert a memory card. (See page 16)  
4 Select the printing method. Three main methods are:  
• Printing by using the Photo Index Sheet (See page 17)  
• Printing all images (See page 18)  
• Printing an index (See page 19)  
X Compatible Memory Cards  
Slot 2  
Slot 1  
MEMORY STICK  
MultiMediaCard  
CompactFlash Type I/II  
Microdrive memory card  
SmartMedia SD Secure Digital memory card  
Must be inserted into a card adapter  
MEMORY STICK DUO  
miniSD  
xD-Picture Card  
CAUTION  
• When using a MEMORY STICK DUO, miniSD Card, or an xD-Picture Card, make sure to  
insert these cards into a card adapter (must be purchased separately) before inserting it into  
the Card Slots of the machine.  
Chapter 3  
Photo Printing From A Memory Card (MP130)  
15  
X Inserting/Removing A Memory Card  
Inserting A Memory Card  
1 Make sure the machine is turned ON.  
2 Insert the memory card or the card adapter containing the memory card  
into the appropriate Card Slots.  
Removing A Memory Card  
CAUTION  
• If an error occurs during printing from the memory card (e.g. paper runs out), do not remove  
the memory card or card adapter containing a memory card as this may damage the data on  
the memory card.  
• While the Access Lamp is flashing, do not remove the memory card or the card adapter  
containing a memory card as this may damage the data on the memory card.  
1 Press [ON/OFF] to turn OFF the machine.  
2 Remove the memory card from the Card  
Slots.  
16  
Photo Printing From A Memory Card (MP130)  
Chapter 3  
   
X Printing By Using The Photo Index Sheet  
With the MP130, you can easily print photographs using a Photo Index Sheet, by filling  
in the appropriate circles to select print options and photographs you want to print. Simply  
scanning a Photo Index Sheet prints the selected photographs according to the selections  
you have made.  
1 Turn ON the machine, and load letter- or A4-size paper in the Auto Sheet  
Feeder.  
2 Insert the memory card into the Card Slots. (See page 16)  
3 Press [Photo Index Sheet].  
4 Use [W] or [X] to select <PRINT>, and then press [OK].  
5 Use [W] or [X] to select the range of photographs to print on the Photo  
Index Sheet.  
z If you select <ALL PAGES>:  
1. Go to step 6.  
z If you select <LAST IMAGE>:  
1. Press [OK].  
2. Use [W] or [X] to select how many recent photographs to print.  
3. Go to step 6.  
z If you select <SELECT RANGE>:  
1. Press [OK].  
2. Use [W] or [X] to select the first recorded date of photographs you want to print,  
and then press [OK].  
3. Use [W] or [X] to select the last recorded date of photographs you want to print.  
4. Go to step 6.  
Chapter 3  
Photo Printing From A Memory Card (MP130)  
17  
 
6 Press [OK].  
7 Fill in the appropriate circles (  
) with a dark pencil to select the  
photographs to print and print settings.  
8 Load the paper selected on the Photo Index Sheet in the Auto Sheet  
Feeder.  
9 Load the Photo Index Sheet on the Platen Glass.  
CAUTION  
• Be sure to load the Photo Index Sheet in the correct orientation on the Platen Glass.  
10Press [Photo Index Sheet].  
11Use [W] or [X] to select <SCAN>, and then press [OK].  
X Printing All Images  
This printing method creates individual prints of all photographs stored on a memory  
card.  
1 Press [PHOTO], and then press [Menu] once until <PHOTO PRINT>  
appears.  
2 Use [W] or [X] to select <ALL IMAGES>, and then press [OK].  
3 Use [W] or [X] to select the paper size, and then press [OK].  
4 Use [W] or [X] to select the paper type, and then press [OK].  
z If you select <PLAIN PAPER>:  
1. Use [W] or [X] to select date printing or not, and then press [OK].  
z If you select any paper type other than <PLAIN PAPER>:  
1. Use [W] or [X] to select borderless printing or not, and then press [OK].  
2. Use [W] or [X] to select date printing or not, and then press [OK].  
5 Press [Color].  
18  
Photo Printing From A Memory Card (MP130)  
Chapter 3  
 
X Index Printing  
With the MP130, you can print an index to check all the image data on the memory card,  
and select the settings for individual images and print them according to your preference.  
Single image  
Prints a specified single image stored on a memory card.  
Prints a specified range of images stored on a memory card.  
Range of images  
1 Press [PHOTO], and then press [Menu] once until <PHOTO PRINT>  
appears.  
2 Use [W] or [X] to select <INDEX>, and then press [OK].  
3 Use [W] or [X] to select the paper size, and then press [OK].  
4 Use [W] or [X] to select the paper type, and then press [OK].  
5 Use [W] or [X] to select date printing or not, and then press [OK].  
6 Press [Color].  
Chapter 3  
Photo Printing From A Memory Card (MP130)  
19  
 
Printing According To The Selected Photo Print Mode  
1 Press [PHOTO], and then press [Menu] once until <PHOTO PRINT>  
appears.  
2 Use [W] or [X] to select the photo print mode below, and then press  
[OK].  
z If you select <SINGLE IMG>:  
1. Select the image number and the number of copies.  
z If you select <SELECT RANGE>:  
1. Select the range of image numbers or date.  
3 Use [W] or [X] to select the paper size, and then press [OK].  
4 Use [W] or [X] to select the paper type, and then press [OK].  
z If you select <PLAIN PAPER>:  
1. Use [W] or [X] to select date printing or not, and then press [OK].  
z If you select any paper type other than <PLAIN PAPER>:  
1. Use [W] or [X] to select borderless printing or not, and then press [OK].  
2. Use [W] or [X] to select date printing or not, and then press [OK].  
5 Press [Color].  
20  
Photo Printing From A Memory Card (MP130)  
Chapter 3  
PC  
4
Printing From Your Computer  
X Printing Documents  
The print procedure varies slightly depending on the application software. The basic print  
procedure is explained here.  
1 Load paper in the Auto Sheet Feeder. (See page 13)  
2 Open the document in the application software, and select the  
command to print.  
3 In the [Print] dialog box, make sure your machine is selected in the  
[Printer] box or the drop-down list.  
4 Adjust the settings for your document as necessary, then click the print  
command.  
X Canceling Printing  
z Canceling before the machine starts printing  
1. In the [Print] dialog box, click the button to cancel printing.  
z Canceling after the machine starts printing  
1. Click [Start], point to [Control Panel], then click [Printers and Faxes].  
2. In the [Printers and Faxes] or [Printers] screen, double-click the printer icon of the  
machine.  
3. Right-click the print job to be canceled, then click [Cancel] or [Cancel Printing].  
Chapter 4  
Printing From Your Computer  
21  
z Canceling before the machine starts printing  
1. In the [Print] dialog box, click the button to cancel printing.  
z Canceling after the machine starts printing  
1. Click [Edit Printer List] from the [Printer] pop-up menu in the [Print] screen.  
2. Double-click the printer icon of the machine in the Printer List.  
3. Select the print job you wish to cancel and click [Delete].  
X Changing Print Settings  
Your machine is initially installed with factory-predefined settings, enabling you to print  
immediately. You can change these print settings to suit the document you are printing.  
For details, see the online Help or Software Guide, located on your Setup CD-ROM.  
z Changing print settings with the Print Advisor:  
Displays as a wizard that guides you through a series of questions to select the appropriate  
print settings for your document.  
z Changing print settings manually:  
You can manually change individual settings to suit your document.  
z Changing print settings on the [Print] dialog box:  
In the [Print] dialog box, you can configure settings such as the paper type and print  
quality.  
z Changing print settings on the [Page Setup] dialog box:  
In the [Page Setup] dialog box, you can configure settings such as the paper size, print  
orientation, enlargement/reduction ratio.  
22  
Printing From Your Computer  
Chapter 4  
PC  
5
Scanning  
X Scanning Methods  
• Using the MP Navigator (See below)  
• Using a TWAIN- or WIA- (Windows XP only) compliant application software  
(See Software Guide)  
• Scanning with the Operation Panel of the machine (See Software Guide)  
Scanning Using The MP Navigator  
MP Navigator contains menu for scanning documents to your computer and processing  
and saving them. For details on using the MP Navigator, see Software Guide.  
1 Load the document on the Platen Glass. (See page 12)  
2 Double-click [MP Navigator 1.0] or [MP Navigator 1.1].  
3 Click [Scan Photo/Document].  
4 Make settings such as Document Type and Continuous Scan.  
• [Document Type]  
Select a document type to be scanned.  
• [Specify]  
Change advanced settings for scanning such as [Document Type], [Document Size],  
[Scanning Resolution], [Reduce moire] and [Enhance contours].  
• [Continuous]  
Check this to scan multiple documents continuously.  
5 Click [Scan].  
6 Edit the scanned image as required.  
7 Select what to do with the scanned image data according to preference.  
Chapter 5  
Scanning  
23  
 
6 Maintenance  
X Replacing An Ink Tank  
1 Make sure the power is turned ON.  
2 Lift the Scan Unit until it locks into place.  
3 Open the Paper Output Tray.  
4 Open the Inner Cover.  
CAUTION  
• Do not try to manually move or stop the Print Head  
Holder.  
• Do not touch any metal parts.  
5 Hold the empty ink tank’s tab and pull  
forward to release. Lift out the ink tank.  
CAUTION  
• Do not remove the print head from the machine.  
• Remove one ink tank at a time.  
• Do not touch the transparent film (A), film cable (B),  
ink absorber (sponge part) (C), or any metal parts.  
(A) (B)(C)  
6 Remove the new ink tank from its  
packaging. Then hold the ink tank as  
shown and remove the protective cap (A).  
(A)  
24  
Maintenance  
Chapter 6  
CAUTION  
(B)  
• Do not touch the ink port (B).  
• Do not shake or drop the ink tank as the ink may leak  
and stain your clothes or hands.  
• Do not attempt to reattach the protective cap once you  
remove it.  
• Do not place the ink port in contact with any other  
surface.  
7 Insert the ink tank into the empty slot on  
the print head.  
8 If you need to replace another ink tank, repeat steps 5 to 7.  
9 Close the Inner Cover.  
CAUTION  
• Press the center of the Inner Cover until the cover locks into place.  
10Return the Scan Unit to its original position.  
11If you replaced the black ink tank, press [W]. If you did not, press [X].  
12If you replaced the color ink tank, press [W]. If you did not, press [X].  
X Cleaning The Print Head  
If the printed nozzle check pattern is broken, missing, or a specific color is not printed,  
clean the print head.  
1 Press [Menu] repeatedly until <USER DATA> appears.  
2 Use [W] or [X] to select <MAINTENANCE>, and then press [OK].  
3 Use [W] or [X] to select <CLEANING> or <HEAD REFRESHIN> as  
necessary.  
–<CLEANING>:  
–<HEAD REFRESHIN>:  
Performs normal print head cleaning.  
Performs deep print head cleaning.  
4 Press [OK].  
Chapter 6  
Maintenance  
25  
7 Troubleshooting  
X Removing Jammed Paper  
If <PLEASE CLEAR PAPER JAM AND PRESS [OK]> is displayed on the LCD,  
follow this procedure to clear the paper jam.  
Clearing Jams In The Paper Output Tray  
1 Gently pull any jammed paper out of  
the Paper Output Tray.  
2 Press [OK].  
Clearing Jams From The Auto Sheet Feeder  
1 Gently pull out any jammed paper  
from the Auto Sheet Feeder.  
2 Press [OK].  
X More Information  
For details on other troubleshooting, see User’s Guide.  
26  
Troubleshooting  
Chapter 7  
The following ink tanks are compatible with this printer.  
For details on ink tank replacement, refer to “Maintenance” in this guide.  
HT7-0124-000-V.1.0 XX2004XX  
© CANON INC. 2004  
PRINTED IN CHINA  

Brother Network MFC 7840W User Manual
Cornelius A8663 User Manual
Cornelius Enduro 150 8 Valve User Manual
Daewoo DSB 122L User Manual
Fedders C48ACD1VF User Manual
Friedrich WallMaster WS10B30A User Manual
Fujitsu Air Conditioner ASU12RLS User Manual
Groupe SEB USA T FAL Digital Watch Babyphone Watch Babyphone 912471 User Manual
Havis Shields KK F ST SS User Manual
Honda Powersports Automobile Parts GXH50 User Manual