6517-6LN
E74M Color Monitor
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Precautions.......................................................................................A2
Workplace Preparation .................................................................A2
Working Practices.........................................................................A2
Monitor Driver Installation............................................................A4
Driver installation for Windows 95 or Windows 98 ......................A4
Driver installation for Windows 2000 or Windows Me .................A5
Driver installation for Windows XP ...............................................A6
Control Panel Function...................................................................A7
Front Panel Controls......................................................................A7
On Screen Display (OSD) Control Adjustment........................A8
On Screen Display (OSD) Selection and Adjustment...............A9
Troubleshooting.....................................................................A14
Specifications ........................................................................A16
Using the Audio Functions.....................................................A18
Side Jacks....................................................................................A18
Rear Panel Jacks..........................................................................A18
Microphone Operation ...............................................................A18
LINE OUT...................................................................................A18
Front Panel Controls....................................................................A19
On Screen Display (OSD) Selection and Adjustment.............A20
Audio Specifications..............................................................A21
Audio Specifications ...................................................................A21
Service Information.....................................................................A21
A1
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Workplace Preparation
Positioning the Monitor
Choose a suitable place to position the monitor where it is not near
fluorescent desk lighting or any equipment that produces magnetic fields
that could cause interference. Ensure that the furniture or equipment can
support the weight of the monitor. Allow at least 50mm (2 in.) ventilation
space around the monitor.
Height
Position the monitor so that the top of the screen is slightly below your
eye level when you sit at your workstation.
Orientation
- Choose a position that gives the least reflection from lights and
windows, usually at a right angle to any windows.
- Position the monitor directly in front of you so that you do not have to
twist your body.
- Tilt the monitor to a comfortable viewing angle.
Working Practices
Rest
Take regular breaks. Vary your posture, and stand up and stretch
occasionally as prolonged use of computer workstations can be tiring.
Back
Sit back in the chair and use the back rest.
Hands
Use a light touch on the keyboard, keeping your hands and fingers
relaxed. Allow a space in front of the keyboard to rest your wrists when
not typing. Consider using a wristpad.
Eyesight
Working with monitors, in common with any prolonged close work, can
be visually demanding. Look away from the screen periodically and have
your eyesight checked regularly.
A2
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Screen settings
Set the screen brightness and contrast to a comfortable level. You may
have to adjust this as the lighting changes during the day. Many
application programs let you select color combinations which can help
you to view in comfort.
Power Cord
For safe operation, use the power cord supplied with the unit.
Notes
Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or
excessive dust or mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
A3
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Driver Installation
Driver installation for Windows 95 or Windows 98
To use the Plug and Play feature in Microsoft®Windows®95 or
Windows 98, files should be loaded from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to
boot into Windows 95 or Windows 98.
Your computer’s Plug and Play code may warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,
CONTROL PANEL and then double - clicking on the DISPLAY icon.
5. Click the SETTINGS tab.
• In case of Windows 95 :
6 - 1.Click the CHANGE DISPLAY TYPE button.
2.Click the CHANGE MONITOR TYPE button.
• In case of Windows 98 :
6 - 1.Click the ADVANCED button.
2.Click the MONITOR tab.
3.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on
CHANGE button and then select the NEXT button.
4.Click the “Display a list of the known drivers for this device so that
I can choose a specific driver” and then select the NEXT button.
7. Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK
button.
8. Click OK.
9. Ensure that the CD drive letter is selected.
10.Choose IBM E74M monitor and Click OK. The files will be copied
from the CD to your hard disk drive.
11. Close all open windows and remove the CD.
12.Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
A4
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Driver Installation
Driver installation for Windows 2000 or Windows Me
To use the Plug and Play feature in Microsoft Windows 2000 or
Microsoft Windows Millennium Edition(Me) files should be loaded
from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to
boot into Windows 2000 or Windows Me.
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,
CONTROL PANEL and then double - clicking on the DISPLAY icon.
5. Click the SETTINGS tab.
6. Click the ADVANCED button.
7. Click the MONITOR tab.
8. Click the PROPERTIES button.
9. Click the DRIVER tab.
10.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on UPDATE
DRIVER and then Click the NEXT button.
11. Select the “Display a list of the known drivers for this device so that I
can choose a specific driver” and then Click the NEXT button.
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK
button.
13.Click OK.
14.Ensure that the CD drive letter is selected.
15.Choose IBM E74M monitor and Click OK. The files will be copied
from the CD to your hard disk drive.
16.Close all open windows and remove the CD.
17.Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
A5
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Driver Installation
Driver installation for Windows XP
To use the Plug and Play feature in Microsoft Windows XP files should
be loaded from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to
boot into Windows XP.
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,
CONTROL PANEL and then double - clicking on the DISPLAY icon.
5. Click the SETTINGS tab.
6. Click the ADVANCED button.
7. Click the MONITOR tab.
8. Click the PROPERTIES button.
9. Click the DRIVER tab.
10.Open the HARDWARE UPDATE WIZARD window by clicking on UPDATE
DRIVER and then Click the NEXT button.
11. Select the “Install from a list or Specific location(Advanced)” and then
Click the NEXT button.
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK
button.
13.Click OK.
14.Ensure that the CD drive letter is selected.
15.Choose IBM E74M monitor and Click OK. The files will be copied
from the CD to your hard disk drive.
16.Close all open windows and remove the CD.
17.Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
A6
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the monitor on or off.
This Indicator lights up green when the monitor
operates normally. If the monitor is in power saving
mode, this indicator color changes to amber.
Power Indicator
MENU (or OSD)
Button
Use this button to enter or exit the on screen
display.
Use these buttons to choose or adjust items in
the on screen display.
Buttons
SELECT (or SET)
Button
Use this button to enter a selection in the on
screen display.
Control
Direct Access Function
Buttons
Buttons
Bring up Contrast adjustment
Bring up Brightness adjustment
The Contrast and Brightness functions are also available in the
On Screen Display (OSD) menu.
A7
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display (OSD) Control Adjustment
Screen Adjustment
NOTE
Allow the monitor to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU (or OSD) Button, then the main menu of the OSD
appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the SELECT (or SET) Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the SELECT (or SET) Button.
Exit the OSD by pressing the MENU (or OSD) Button.
A8
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
Sub menu
Brightness
Reference
To adjust the brightness and
contrast of the screen
BRIGHTNESS/
CONTRAST
Contrast
V Position
H Position
To adjust the position of the
screen
POSITION
SIZE
V Size
H Size
To adjust the size of the screen
Tilt
To adjust the shape of the screen
Side Pincushion
S Pincushion Balance
Parallelogram
Trapezoid
SHAPE
PRESET 6500K
9300K
To customize the color of the
screen
COLOR
Temp
R/G/B(User Color)
Video Level
Language
OSD Time
To customize the screen status
for a user's operating environment
SETUP
Degauss
Recall
To improve the clarity and
stability of the screen
SPECIAL
Reset
Moire H Moire
V Moire
: Adjustable
A9
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
To adjust the brightness and contrast of the screen
OSD Adjust
Description
Brightness
To adjust the brightness of the screen.
Contrast
To adjust the contrast of the screen.
To adjust the position of the screen
OSD Adjust
Description
Vertical Position
To move image up and down.
Horizontal Position
To move image left and right.
To adjust the size of the screen
OSD Adjust
Description
Vertical Size
To adjust image height.
Horizontal Size
To adjust image width.
A10
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
To adjust the shape of the screen
OSD Adjust
Description
Tilt
To correct image rotation.
Side Pincushion
To correct a concave or convex bowing of
the image.
Side Pincushion Balance
To correct the balance of both sides
bowing.
Parallelogram
To correctly adjust the skew of the image.
Trapezoid
To correct geometric distortion.
To customize the color of the screen
OSD Adjust
Description
6500K/ 9300K
PRESET
TEMP
Select the screen color.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Select the screen temperature which you
prefer among reddish or bluish or any color
in between.
RED
GREEN
BLUE
Set your own color levels.
A11
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
To customize the screen status for a user's operating environment
OSD Adjust
Description
VIDEO LEVEL This item is used to select the monitor's
input signal level. The normal level used for
most PCs is 0.7V.
If the screen becomes suddenly washed-
out or blurred, please select 1.0V and try
again.
LANGUAGE To choose the language in which the
control names are displayed.
OSD Menus are available in 11 languages:
English, German, French, Spanish, Italian,
Swedish, Finnish, Portuguese, Korean,
Chinese and Russian.
OSD TIME
Set the OSD time, i.e. the length of time a
menu will remain on-screen before it shuts
off automatically. Adjust the time to 5, 10,
20, 30 or 60 seconds.
A12
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
To improve the clarity and stability of the screen
OSD Adjust
Description
DEGAUSS To manually demagnetize the screen to
avoid showing incorrect images or colors.
RECALL You can use this function to reload the
modified parameters for screen display
operation, as specified by the user after
purchase: Position, Size, Side Pincushion,
Side Pincushion Balance, Parallelogram,
Trapezoid (These recalled options may differ
depending on the mode selected: Preset,
User, or New).
If you don’t want to recall the monitor to
these modified settings, use the
button
to select CANCEL and then press the
SELECT (or SET) button.
RESET
Return to all factory default settings except
"LANGUAGE, BRIGHTNESS,
CONTRAST": Tilt, Color 9300K, Video
Level, OSD Time, Moire (These reset
options may differ depending on the mode
selected: Preset, User, or New).
If you don’t want to reset the monitor, use the
button to select CANCEL and then
press the SELECT (or SET) button.
MOIRE
This item allows you to reduce the degree of
moire. (Moire is caused by interference
Horizontal Scan Line with the periodical dot
screen). It is normally OFF(H:0/V:0).
The moire adjustments may affect the focus
of the screen.
Moire adjustments may shake slightly while
the moire reduction function is on.
A13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No image appears
Is the power cord of the
monitor connected?
Check and see if the power cord is connected properly to
the power outlet.
Is the power indicator light
on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness and the contrast.
Is the power indicator
amber?
If the monitor is in power saving mode, try moving the
mouse or pressing any key on the keyboard to bring up
the screen.
Do you see an "OUT OF
FREQUENCY" message
on the screen?
This message appears when the signal from the PC
(video card) is out of horizontal or vertical frequency
range of the monitor. See the 'Specifications' section of
this manual and configure your monitor again.
Do you see a "SELF
DIAGNOSITICS" message
on the screen?
This message appears when the signal cable between
your PC and your monitor is not connected. Check the
signal cable and try again.
The screen is flickering.
Is the vertical frequency
less than 70Hz or is your
monitor set to the
Set the vertical frequency to 72Hz or higher, and
consult the video card user manual for instructions on
converting to a non-interlaced mode.
(You can set this option under the Display icon of the
Control Panel.)
interlaced mode?
Do you have any
magnetic material such
as adapter, or high-
voltage line near to your
monitor?
Remove magnetic sources, such as power
adapters, speakers, or high-voltage lines, away from
the monitor.
Do you hear a "~ding"
sound while the monitor
is flickering?
Use the normal degaussing function. This function
clears the screen and reduces any screen blur that
may occur due to the surrounding magnetic field. The
screen may flicker for about 5 seconds, accompanied
by a "~ding" sound.
A14
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The screen color is not normal.
Do you see basic
discoloration (16 colors)?
Set the color depth to 256 colors or higher: use 'Control
Panel' 'Display' 'Settings' 'Color Palette'
Is the screen color unstable
or monochrome?
Check the connection of the signal cable.
Do you see a partial
blurring on the screen?
This happens due to interference from surrounding
magnetic fields, as created when speakers, steel
structures, or high-voltage lines are placed near the
monitor. Remove any such materials from the
immediate vicinity and use the DEGAUSS icon on the
screen adjustment menu to fix the screen.
I see an after-image on the screen.
Do you see the after-image
even when you turn off
the monitor?
A premature aging of the monitor pixels may cause the
prolonged display of a single image on the screen. Be
sure to use a screen saver to maximize the service life of
the monitor.
I see waves on the screen.
Do you see the wave
directly on the screen?
This occurs in inverse proportion to the screen focus,
which can be caused by a particular frequency or video
card. Brighten the screen and use the 'MOIRE' icon on
the screen adjustment menu to adjust the screen.
Have you installed the monitor driver?
Have you installed the
monitor driver?
Be sure to install the monitor driver from the IBM Monitor
CD that comes with your monitor.
A15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Picture Tube
17 inches (16.0 inches viewable)
90 degree deflection
0.26mm diagonal, 0.23mm horizontal dot pitch
AGARAS(Anti-Glare Anti-Reflective Anti-Static) coating
Sync Input
Horizontal Freq. 30 - 70kHz (Automatic)
Vertical Freq.
Input Form
Signal Input
50 - 160Hz (Automatic)
Separate TTL, Positive/Negative
15 pin D-Sub Connector
Input Form
Resolution(max) 1280 x 1024@60Hz
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive
Video Input
Plug&Play
DDC 2B
≤ 90 W
≤ 5 W
Normal
Power Off
Power
Consumption
Dimensions
&Weight
(with tilt/ swivel
stand)
Width
Height
Depth
45.0 cm / 17.7 inches
39.9 cm / 15.7 inches
41.6 cm / 16.4 inches
Net
15.2 kg (33.51 lbs)
Power Input
AC 100-240V 50/60Hz 2.0A
Environmental
Conditions
Operating Conditions
Temperature
Humidity
0˚C to 40 ˚C
10 % to 90 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Tilt/Swivel Stand
Signal cable
Power cord
Detached
Attached
Detached
TCO95
Regulations
A16
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
31.47
37.50
43.27
31.47
37.93
46.88
53.68
41.775
60.02
68.677
VESA
VESA
VESA
VESA
VESA
VESA
VESA
MFI
640 x 480
640 x 480
640 x 480
720 x 400
720 x 400
800 x 600
800 x 600
960 x 529
1024 x 768
1024 x 768
60
75
85
70
85
75
85
75
75
85
VESA
VESA
10
A17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Audio Functions
Side Jacks
Headphone Jack
Microphone Jack
A headphone jack that automatically
mutes the speaker volume when
headphones plugged in.
An external microphone can be used
instead of the built-in microphone.
Rear Panel Jacks
Audio In -Sky Blue
Connects to the *LINE OUT jack of the PC
sound card.
AUDIO
IN
MIC.
OUT
Mic Out - Pink
Connects to the microphone jack of the
PC sound card.
Microphone Operation
Using this jack reduces the length of cable needed to reach the PC's sound card.
In order to use the MIC jack, use a cable to plug into the rear of the monitor (MIC
OUT) and into the MIC input jack of your sound card (if available).
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp).
Make sure that the connecting terminal of the PC sound card is checked before
connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the
PC volume.
NOTE
If the Audio Out of the PC supports both Speaker Out and Line Out, Please use
the Line Out function (Refer to the PC Manual).
A18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Audio Functions
Front Panel Controls
Control
Function
Audio Mute
Use to mute audio source.
Microphone
Built-in microphone.
Brings up to the audio menu.
Buttons
Buttons
Use these buttons to choose or adjust items
in the on screen display.
To make adjustments in the On Screen Display, follow these steps:
A19
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
VOLUME
70
ON
Main Menu
Description
Raises or lowers audio level.
VOLUME
Raises or lowers treble level.
Raises or lowers bass level.
TREBLE
BASS
Changes levels of left/right speaker.
BALANCE
Enables or disables microphone usage.
MICROPHONE
: Adjustable
A20
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Specifications
Audio Specifications
Audio
RMS Audio Output 1W + 1W (Right + Left)
Input Sensitivity 0.7 Vrms
Speaker Impedance 8Ω
Service Information
The following parts are for use by IBM services, or IBM authorized
dealers, to support customer warranty. Parts are for service use only.
DESCRIPTION
MODEL
COLOR
MACHINE
TYPE
PART
NUMBER
31P8102 E74M FRU MONITOR
31P8103 E74M FRU - Tilt/Swivel
31P8122 E74M FRU color coded
audio cables
6517
6LN
Stealth Black
A21
Download from Www.Somanuals.com. All Manuals Search And Download.
|