16” Outdoor Stand Fan
with Misting Feature
Owner’s Manual
Model
90397
Form# 44095-01
R20101214
©2010 Hunter Fan Co.
Download from Www.Somanuals.com. All Manuals Search And Download.
IntrOductIOn
Thank you for choosing the Hunter Outdoor Stand Fan with Misting capability. Using your Hunter Fan will provide a
soothing, cooling mist to any outdoor environment. For optimal cooling effects, the misting fan should be run with
outdoor temperatures above 85OFand humidity levels below 85%.
3 Misting nozzles for added cooling
3 A powerful motor for maximum air flow
3 Three speeds to adjust your comfort level
3 Weather resistant construction
saFety and warnIngs
To reduce the risk of fire or electrical shock, dO nOt use this fan with any solid-state speed control device.
When using electrical appliances, basic precautions should always be taken to reduce the risk of fire, electric shock,
and personal injury.
read and save these instructions!
1. Improper installation may result in the risk of fire, electric shock, or personal injury.
2. The power plug must be unplugged from the power socket when not in use, before cleaning, servicing, maintenance,
and before moving to another location.
3. The fan should be placed on a flat, stable surface to avoid overturning.
4. Use fan only for intended use, as described in this instruction manual.
5. To protect against electrical shock, dO nOt immerse unit, plug, or cord in water.
6. Close supervision is necessary when any appliance is used by or near children.
7. NEVER insert fingers, pencils, or any other objects through the grill when the fan is running.
44095-01 20101214
3
Download from Www.Somanuals.com. All Manuals Search And Download.
8. dO nOt operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been
dropped or damaged in any manner.
9. To disconnect, grip plug and pull from wall outlet. neVer pull directly on cord.
10. This product is intended for residential use only and not for commercial or industrial use.
11. dO nOt operate fan in the presence of explosive and/or flammable fumes, or freezing temperatures.
12. This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. dO nOt attempt
to defeat the purpose of this safely feature.
13. dO nOt use an extension cord to plug this unit into an outlet.
14. This fan is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the risk of electric shock. dO nOt attempt to disconnect or bypass
this safety feature.
15. dO nOt run the fan for extended periods of time unattended.
16. This fan is intended for outdoor use.
17. dO nOt attempt to mount or hang this fan from a wall or ceiling.
18. Exposure to sunlight for extended periods of time may fade the appearance of this product.
unpackIng
As you unpack the fan, save the carton and packing materials in case you want to move or ship the unit in the future.
Carefully remove all items from the box.
NOTE: It is best to have someone hold the box while you lift the fan and the protective packaging out of the carton.
Make sure all shipping materials are removed from fan before operating.
4
©2010 Hunter Fan Co.
Download from Www.Somanuals.com. All Manuals Search And Download.
parts lIst
part
A
B
name
Front Grill
Quantity
A
D
B
C
H
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
G
F
Blade Cap
C
D
E
Fan Blade
Plastic Nut
I
Rear Grill
F
Plastic Sleeve
Motor Shaft
Oscillation Knob
Motor Housing
Push Button
Thumb Screw
Power Cord
Waterproof Cover
Misting Line Holder
Internal Pole
Height Adjustment Knob
External Pole
Misting Line
Valve
G
H
I
K
E
J
J
K
L
R
L
M
M
N
O
P
O
N
P
S
Q
R
Q
T
S
U
T
Stand Cover
Screws
V
U
V
Base
44095-01 20101214
5
Download from Www.Somanuals.com. All Manuals Search And Download.
M
P
Base asseMBly (FIgure 1.)
O
1. Unscrew the Height Adjustment Knob (P) on the External Pole (Q) and set aside. Attach the External Pole (Q) to
the Base (V) by inserting and tightening the four Screws (U) included.
2. Slide the stand cover (t) over the External Pole (Q) into the ring on the Base (V).
T
3. Use your finger to pull out the Internal Pole (O). Slide the Height Adjustment Knob (P) over the Internal Pole
(O). Fasten it to the External Pole (Q) by turning the Height Adjustment Knob (P) clockwise while holding the
Internal Pole (O). Make sure the Height Adjustment Knob (P) is tightly fastened before final assembly.
Q
U
V
4. Slide the Waterproof Cover (M) over the Internal Pole (O) until it covers the top of the Height Adjustment Knob
(P).
Figure 1.
C
D
I
grIll asseMBly (FIgures 2. & 3.)
G
1. Remove the Blade Cap (B) by turning clockwise, the Plastic Nut (D) by turning counterclockwise from the Motor
Housing (I), and the Plastic Sleeve (F) by pulling it straight off the Motor Shaft (G). Discard only the plastic sleeve.
F
2. Position the Rear Grill (E) over the Motor Shaft (G), making certain the handle is at the top and the one notch in
the center of the Rear Grill (E) cover fits over the three prong post on the Motor Housing (I).
B
E
K
3. Secure the Rear Grill (E) with the Plastic Nut (D) turning clockwise to tighten firmly.
Retaining Pin
4. Slide the Fan Blade (c), with the hollow interior of the blade facing towards the Rear Grill (E), onto the Motor
Shaft (G). Line the cut-out on the back of the Fan Blade (C) with the retaining pin on the Motor Shaft (G).
Figure 2.
A
5. Secure the Fan Blade (C) onto the Motor Shaft (G) by turning the Blade Cap (B) counterclockwise until it is firmly
in place.
6. Loosen the bolt on the bottom of the Front Grill (A) and mount the Front Grill (A) with the logo right side up to
the Rear Grill (E) by snapping both together firmly.
nOte: Ensure all snaps around the Front Grill (A) are secure on the Rear Grill (E).
7. Tighten the bolt on the bottom of the Front Grill (A).
E
Figure 3.
©2010 Hunter Fan Co.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
H
Fan asseMBly (FIgure 4.)
1. Loosen the Thumb Screw (K) by turning it counterclockwise.
I
2. Insert the Internal Pole (O) into the neck joint of the Motor Housing (I) and tighten by turning the Thumb Screw
(K) clockwise. Ensure it is tight enough to support the fan motor.
K
A
3. Attach the Misting Line Holder (N) onto the Internal Pole (O).
4. Secure the Misting Line (R) to the clip under the Front Grill (A) and the Misting Line Holder (N).
R
S
OperatIOn and adjustMents
•
•
Place the fan on a level surface. Plug the GFCI plug into a standard 120-volt AC 3-Prong wall outlet.
N
O
Attach the Valve (S) onto a standard outdoor hose. Turn your water on at the spigot and use the lever on the Valve
(S) to turn water on and off.
M
P
•
To turn the fan on or adjust the speed setting, use the (H) high, (M) medium, (L) low, or (OFF) off buttons on the
lower part of the Motor Housing (I).
•
•
To turn oscillation mode on, push the Oscillation Knob (H). Pull the OScillation Knob (H) up to turn oscillation off.
Adjust the height of the fan by firmly gripping the Internal Pole (O), loosening the Height Adjustment Knob (P)
and adjusting the fan to the desired height. Fasten the Height Adjustment Knob (P) by turning it clockwise.
Figure 4.
nOte: always ensure the Waterproof Cover (M) covers the Height adjustable knob (p) after adjusting the Internal
Pole (N).
RESET
TEST
•
To adjust the angle of the fan, turn the fan off and grasp the motor assembly firmly and tilt up or down.
caution: When not in use, turn the fan off and unplug it from the wall outlet. Turn the water off at the lever on the
Valve (S) and at the water spigot and disconnect the Valve (S) from the hose.
gFcI Operation (Figure 5.):
The GFCI on the plug of this fan has 2 buttons: “Test” and “Reset”. If you wish to see if the GFCI circuit is functioning
properly press the “Test” button. The fan will immediately shut off as if the GFCI has been activated and the window
between the buttons will change to black. This lets you know the GFCI circuit has been activated. Press the “Reset”
button and the fan can be turned on again and the window between the buttons will show orange. This indicates the
GFCI circuit has not been activated and the fan should operate normally.
Figure 5.
44095-01 20101214
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIntenance
warning! Before cleaning your Hunter fan, turn the unit off, unplug it, and disconnect the water hose from the
misting valve. Never use harmful or abrasive chemicals and always unplug the fan.
Fan Maintenance:
The fan body and grill can be cleaned with a slightly damp cloth. A mild dish detergent can be used if necessary. When
cleaning the fan, ensure you dO nOt let excess water drip into the base of the motor where the controls are or into
the motor compartment in the grill.
Misting nozzle Maintenance:
1. To clean the misting nozzles, use a pair of needle nose pliers to twist each nozzle counterclockwise.
2. Once removed, soak the nozzles in white vinegar for 2 hours.
3. Rinse each nozzle with water and place back into the front fan grill.
4. Twist clockwise until secure. dO nOt over tighten.
trOuBleshOOtIng
1. problem
Misting feature sputters or does not mist at all.
solution
•
•
•
•
Ensure your outside water faucet is turned all the way on.
Check the fan’s valve lever and make sure it set open.
Check your water hose for kinks or buckles.
The valves on the fan may be clogged. Follow the instructions in the “Misting Nozzle Maintenance” section above.
2. problem
Fan will not run.
8
©2010 Hunter Fan Co.
Download from Www.Somanuals.com. All Manuals Search And Download.
solution
•
•
Ensure the fan is plugged in.
Check the GFCI on the fan’s plug. If the window is black the GFCI has been tripped and needs to be reset. Press the
“Reset” button on the plug. If the GFCI window is orange then the circuit is active and does not need to be reset.
3. problem
Fan will not oscillate.
solution
•
Ensure the oscillation knob on the fan is pressed in.
4. problem
GFCI continues to activate.
solution
•
•
Try using a different power outlet.
Unplug the unit and contact our Technical Support Department.
If you have tried troubleshooting your problem and are still unable to resolve your issue, contact our Technical Support
Department.
technIcal suppOrt
If you have any additional questions or problems with your Hunter Portable Fan, please call:
USA: 1-888-830-1326
Canada: 1-866-268-1936
Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You
44095-01 20101214
9
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty
The Hunter Fan Company makes the following limited warranty to the user or consumer purchaser of this Hunter
Portable fan:
If your Hunter Portable Fan motor fails at any time within one year after the date of sale to you due to a defect in
material or workmanship, labor to repair the defect will be provided free of charge at our nearest service center or
our Service Department in Memphis, Tennessee. You will be responsible for labor costs after this one-year period. The
foregoing limited warranty applies only to the motor itself, and does not apply to electronic controls such as remote
controls, remote control receivers or transmitters used in conjunction with the motor. These electronic control items
are included in the one year limited warranty below.
If any part of your Hunter Portable Fan other than the motor fails at any time within one year after the date of sale to
you due to a defect in material or workmanship, we will repair or, at our option, replace the defective part free of charge
for parts and labor performed at our nearest service center or at our Service Department in Memphis, Tennessee.
IF THE USER OR CONSUMER PURCHASER CEASES TO OWN THE FAN, THIS WARRANTY AND ANY IMPLIED
WARRANTY WHICH THEN REMAINS IN EFFECT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY, EXPRESSED
OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE FAN.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IN RESPECT TO ANY HUNTER FAN MOTOR OR OTHER FAN PART, IS EXPRESSLY LIMITED
TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE FOR SUCH MOTORS AND OTHER PARTS.
This warranty is voided if your Hunter Fan is not purchased and used in the USA.
This warranty excludes and does not cover defects, malfunctions or failures of any Hunter Portable fan which were
caused by repairs by persons not authorized by us, use of parts or accessories not authorized by us, mishandling,
improper installation, modifications, or damage to the Hunter Portable fan while in your possession, or unreasonable
use, including failure to provide reasonable and necessary maintenance.
10
©2010 Hunter Fan Co.
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain servicing, contact the nearest Hunter authorized service center or the Hunter Fan Company Service
Department, 7130 Goodlett Farms Pkwy. Suite 400, Memphis, Tennessee 38016. Please contact us before shipping your
fan to us. If we authorize you to ship it to us, you will be responsible for all insurance and freight or other transportation
charges to our factory service center. We will return your Hunter Fan freight prepaid. Your portable fan should be
properly packed to avoid damage in transit since we will not be responsible for any such damage. Proof of purchase
is required when requesting warranty service. The purchaser must present sales receipt or other document that
establishes proof of purchase.
IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU.
THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
prOducts
Fan Company
7130 Goodlett Farms Pkwy., Suite 400
Memphis, Tennessee 38016
To learn more about Hunter Fan Company products, please see our Web page at:
Printed in China and Taiwan
11
44095-01 20101214
Download from Www.Somanuals.com. All Manuals Search And Download.
|