Humminbird Computer Monitor 1155C User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1100 Series™ Introduction  
How GPS and Cartography Work  
MMC/SD Slot  
1
1
2
Software Updates........................................................................................................................................ 3  
Accessory Bus  
Video and GPS Output Connectors ............................................................................................................ 3  
3
Installation Overview  
4
Control Head Installation  
6
Gimbal Mounting the Control Head............................................................................................................ 6  
In-Dash Mounting the Control Head ........................................................................................................ 11  
Connecting the Control Head Power Cable to the Boat .......................................................................... 14  
GPS Receiver Installation  
15  
Stem Mounting with an Existing 1" - 14 Thread Stem ............................................................................ 15  
Access Under Mounting Location ............................................................................................................ 17  
No Access Under Mounting Location ...................................................................................................... 17  
Finish Routing the Cable and Check GPS Receiver Operation ................................................................ 18  
Testing the System Installation  
Getting Started - Using Your 1100 Series™  
Powering Up the Control Head  
What’s on the Display  
19  
20  
21  
22  
24  
Key Functions  
POWER/LIGHT Key .................................................................................................................................... 24  
VIEW Key.................................................................................................................................................... 25  
MENU Key.................................................................................................................................................. 25  
4-WAY Cursor Control Key ........................................................................................................................ 25  
View Preset Keys........................................................................................................................................ 26  
EXIT Key...................................................................................................................................................... 26  
INFO Key .................................................................................................................................................... 26  
MARK Key .................................................................................................................................................. 27  
GOTO Key.................................................................................................................................................... 27  
ZOOM (+/-) Keys........................................................................................................................................ 27  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Views  
28  
Views and Readouts .................................................................................................................................. 28  
Bird’s Eye No Readouts View.................................................................................................................... 29  
Bird’s Eye View .......................................................................................................................................... 31  
Chart/Bird's Eye Combo View.................................................................................................................... 33  
Chart/Chart Combo View .......................................................................................................................... 35  
Chart No Readouts View .......................................................................................................................... 37  
Chart View.................................................................................................................................................. 39  
Chart Instrument View ............................................................................................................................ 42  
Chart/Bird’s Eye Instrument View ............................................................................................................ 44  
Screen Snapshot View .............................................................................................................................. 46  
Chart Orientation ...................................................................................................................................... 49  
Viewing Cartography  
50  
Introduction to Navigation  
52  
Waypoints, Routes and Tracks .................................................................................................................. 52  
Save, Edit, or Delete a Waypoint .............................................................................................................. 53  
Navigate to a Waypoint or Position .......................................................................................................... 54  
Add a Waypoint Target or Trolling Grid .................................................................................................... 55  
Save, Edit or Delete a Route .................................................................................................................... 57  
Save or Clear a Current Track.................................................................................................................... 57  
Edit, Delete or Hide Saved Tracks ............................................................................................................ 58  
Man Overboard (MOB) Navigation .......................................................................................................... 58  
The Menu System  
60  
Start-Up Options Menu  
63  
Normal Operation ...................................................................................................................................... 63  
Simulator .................................................................................................................................................. 64  
System Status .......................................................................................................................................... 64  
Self Test...................................................................................................................................................... 65  
Accessory Test............................................................................................................................................ 65  
GPS Diagnostic View ................................................................................................................................ 66  
Navigation X-Press™ Menu  
67  
Active Side ................................................................................................................................................ 68  
Split Position .............................................................................................................................................. 68  
Waypoint [Name] (only with an active cursor on a waypoint) .................................................................... 68  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Cursor to Waypoint (Chart or Combo view only) ........................................................................................ 69  
Save Current Track .................................................................................................................................... 69  
Clear Current Track .................................................................................................................................... 70  
Save Current Route (only when navigating) .............................................................................................. 70  
Skip Next Waypoint (only when navigating) .............................................................................................. 70  
Cancel Navigation (only when navigating) ................................................................................................ 71  
Cancel MOB Navigation (only when MOB Navigation is activated)............................................................ 71  
Remove Target (only if a Target is active).................................................................................................... 71  
Remove Grid (only if a Grid is active) .......................................................................................................... 72  
Waypoint Name (most recently-created waypoint) .................................................................................... 72  
Select Readouts ........................................................................................................................................ 73  
Select Nav Readouts ................................................................................................................................ 76  
Select Instrument Readouts...................................................................................................................... 78  
Screen Snapshot X-Press™ Menu (Screen Snapshot View only)  
80  
Delete Image (optional-purchase MMC/SD card only) ................................................................................ 80  
Delete All Images (optional-purchase MMC/SD card only) ........................................................................ 80  
Navigation Menu Tab  
81  
Current Track.............................................................................................................................................. 82  
Saved Tracks .............................................................................................................................................. 82  
Waypoints .................................................................................................................................................. 83  
Routes ........................................................................................................................................................ 84  
Chart Orientation ...................................................................................................................................... 84  
North Reference ........................................................................................................................................ 85  
Trolling Grid Rotation ................................................................................................................................ 85  
Trackpoint Interval .................................................................................................................................... 85  
Track Min Distance (Advanced) ................................................................................................................ 86  
Track Color Range...................................................................................................................................... 86  
Map Datum (Advanced) ............................................................................................................................ 86  
Course Projection Line .............................................................................................................................. 87  
3D View Outline ........................................................................................................................................ 87  
Export All Nav Data .................................................................................................................................. 87  
Delete All Nav Data (Advanced)................................................................................................................ 62  
Continuous Navigation Mode .................................................................................................................. 62  
GPS Receiver Override (Advanced)............................................................................................................ 62  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Chart Menu Tab  
89  
Chart Detail Level ...................................................................................................................................... 90  
Map Borders .............................................................................................................................................. 90  
Lat/Lon Grid .............................................................................................................................................. 91  
Spot Soundings.......................................................................................................................................... 91  
Navaids on Bird's Eye View ...................................................................................................................... 91  
Shaded Depth ............................................................................................................................................ 91  
Chart Select................................................................................................................................................ 92  
NVB Chart Preference................................................................................................................................ 92  
Set Simulation Position (Advanced) .......................................................................................................... 92  
Set Map Offset (Advanced)........................................................................................................................ 93  
Clear Map Offset (Advanced) .................................................................................................................... 93  
Alarms Menu Tab  
94  
Alarm Volume ............................................................................................................................................ 95  
Low Battery Alarm .................................................................................................................................... 95  
Temp. Alarm .............................................................................................................................................. 95  
Off Course Alarm ...................................................................................................................................... 96  
Arrival Alarm .............................................................................................................................................. 96  
Drift Alarm.................................................................................................................................................. 97  
Setup Menu Tab  
98  
Sound Volume............................................................................................................................................ 99  
Units - Depth.............................................................................................................................................. 99  
Units - Temp. (International only) .............................................................................................................. 99  
Units - Distance (with Speed input only).................................................................................................. 100  
Units - Speed (with Speed input only)...................................................................................................... 100  
User Mode................................................................................................................................................ 100  
Language (International only) .................................................................................................................. 101  
Triplog Reset (with Speed input only) ...................................................................................................... 101  
Restore Defaults ...................................................................................................................................... 101  
Temp. Offset (Advanced).......................................................................................................................... 102  
Speed Calibration (Advanced, with Speed paddlewheel only) .................................................................. 102  
Local Time Zone (Advanced).................................................................................................................... 102  
Daylight Saving Time (Advanced)............................................................................................................ 103  
Position Format (Advanced) .................................................................................................................... 103  
Time Format (Advanced, International only).............................................................................................. 103  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Date Format (Advanced, International only).............................................................................................. 104  
Digits Format (Advanced) ........................................................................................................................ 104  
NMEA Output (Advanced) ...................................................................................................................... 104  
Demonstration.......................................................................................................................................... 105  
IP Address Setup .................................................................................................................................... 105  
Video Out (Advanced) .............................................................................................................................. 105  
Views Menu Tab  
106  
Accessories Menu Tab  
107  
Using Screen Snapshot .......................................................................................................................... 108  
Troubleshooting 110  
Chartplotter Doesn’t Power Up .............................................................................................................. 110  
Display Problems  
111  
111  
112  
113  
114  
115  
116  
117  
121  
Finding the Cause of Noise  
1-Year Limited Warranty  
Humminbird® Service Policy  
Returning Your Unit for Service  
1100 Series™ Chartplotter Accessories  
Specifications  
Glossary  
Contact Humminbird®  
NOTE: Entries in this Table of Contents which list (International only) are only available on products sold outside  
of the US and Canada by our authorized International Distributors. To obtain a list of authorized International  
Distributors, please visit our website at www.humminbird.com or contact our Customer Resource Center at  
1-800-633-1468 to locate the distributor nearest you.  
NOTE: Entries in this Table of Contents which list (with Speed Input) or (with Temperature Input) may require  
the purchase of separate accessories. You can visit our website at www.humminbird.com to order these  
accessories online or contact our Customer Resource Center at 1-800-633-1468.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1100 Series™ Introduction  
Your 1100 Series™ Chartplotter comes in the following configuration:  
• Humminbird® 1155c Chartplotter: Networkable GPS Chartplotting System, GPS Receiver  
included.  
How GPS and Cartography Work  
Your 1100 Series™ Chartplotter supports GPS and chartplotting, and uses GPS to determine your position  
and display it on a grid. The Global Positioning System (GPS) is a satellite navigation system designed and  
maintained by the U.S. Department of Defense. GPS was originally intended for military use; however,  
civilians may also take advantage of its highly accurate position capabilities, typically within +/- 10 meters,  
depending on conditions. This means that 95% of the time, the GPS receiver will read a location within 10  
meters of your actual position. Your GPS Receiver also uses information from WAAS (the Wide Area  
Augmentation System), EGNOS (the European Geostationary Navigation Overlay Service), and MSAS (the  
MTSAT Satellite Augmentation System) satellites if they are available in your area.  
GPS uses a constellation of 24 satellites that  
continually send radio signals to the earth. Your  
present position is determined by receiving signals  
from up to 16 satellites and measuring the distance  
from the satellites.  
All satellites broadcast a uniquely coded signal  
once per second at exactly the same time. The GPS  
receiver on your boat receives signals from  
satellites that are visible to it. Based on time  
differences between each received signal, the GPS  
receiver determines its distance to each satellite.  
With distances known, the GPS receiver  
mathematically triangulates its own position. With  
once per second updates, the GPS receiver then  
calculates its velocity and bearing.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
The GPS Receiver included with your 1100 Series™ Chartplotter allows you to combine easy-to-use  
chartplotter and navigation capabilities. The following GPS functionality is currently supported by the 1100  
Series™ Chartplotter when it is connected to the included GPS receiver:  
• View current position  
• View current track (breadcrumb trail)  
• View precision speed and heading from your GPS receiver  
• Save tracks, waypoints and routes  
• Travel a route and navigate from one waypoint to the next.  
Your 1100 Series™ supports Navionics® Gold, HotMaps™, HotMaps™ Premium, and Platinum™  
Cartography on MMC or SD card media.  
NOTE: Your 1100 Series™ does not support Navionics® Classic Charts, only Navionics® Gold, HotMaps™,  
HotMaps™ Premium, and Platinum™ Cartography.  
NOTE: Some models come pre-loaded with Navionics® cartography and are referred to as NVB models. NVB  
models are only available domestically. Currently, there are not any international NVB models.  
In non-NVB models, your unit also comes with a built-in UniMap™ with a detailed map of North America  
(Domestic models) or a detailed map of Europe and Southeast Asia, including Australia and New Zealand  
(International models). In non-NVB models, the built-in UniMap™ does not contain Port, Tide or Current  
information, and this information is only available from optional purchase MMC/SD cards.  
Your 1100 Series™ uses the GPS Receiver to determine the position of the boat automatically, and uses  
the zoom level settings on a particular view to select the best chart to display. See Viewing Cartography  
for more information.  
MMC/SD Slot  
Your 1100 Series™ Chartplotter also has an MMC/SD slot that is  
used to insert optional-purchase cards containing additional  
detailed maps. If you insert an MMC/SD that contains a more  
detailed chart for a particular location, your 1100 Series™  
Chartplotter will retrieve that chart and display it automatically.  
Use the illustration to locate the position of the MMC/SD slot  
cover, open the MMC/SD slot cover, then insert the MMC/SD  
into the slot. The label on the MMC/SD should face toward the  
left side of the unit. Press down on the card until it clicks into  
place and close the slot cover.  
Inserting an MMC/SD into the Card Slot  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Updates  
Use the MMC/SD slot to update the software version of your control head. To update the software in your  
control head, plug in the appropriate MMC/SD card that contains a software update file; the unit will  
recognize it, will tell you what software version your control head is currently running, and will ask you if you  
want to update the software in the unit to match that on the MMC/SD card. You can obtain software updates  
from the www.humminbird.com website.  
Accessory Bus  
Use the Accessory Bus to expand the functionality of your 1100  
Series™. Accessories plug directly into the 1100 Series™, enabling  
Advanced features such as WeatherSense and the ®CannonLink™  
Downrigger Controller. Additional tabs and menu choices will be  
added to the menu system automatically when an accessory is plugged  
into the unit. In addition, multiple accessories can be attached  
simultaneously. See Accessories Menu Tab and 1100 Series™  
Accessories in this manual, as well as your accessory Operations  
Manual for additional details.  
Accessory Bus  
NOTE: Accessories such as the CannonLink™ Downrigger Controller, InterLink™, and the WeatherSense®  
require separate purchases. You can visit our website at www.humminbird.com or contact our Customer  
Resource Center at 1-800-633-1468 for additional details.  
Video and GPS Output Connectors  
Your unit comes with a Video Out connector and a GPS Out connector, which can be used with optional-  
purchase accessories. For instance, if you purchase a video monitor and attach it to your control head  
using the Video Out connector, your unit will automatically send a video signal if it detects a monitor. See  
Setup Main Menu: Video Out for more information.  
1100 Series™ Connectors  
1
GPS Out  
2
3
4
5
6
Power  
Communications  
Video Out  
Temp/Speed  
Not Used  
1
2
3
6
5
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Overview  
Please read all instructions that are relevant for your configuration before beginning the installation  
process.  
NOTE: Installation procedures will depend on product configuration.  
The 1100 Series™ has a wide variety of configurations.  
2
1
7
8
5
3
6
4
Accessory Bus  
5
6
7
8
9
1
Optional “Y” Cable  
Power  
GPS Receiver  
WeatherSense®  
Video Signal  
GPS Out  
2
3
4
Temperature  
Speed through water  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1100 Series™ Connectors  
1
GPS Out  
2
3
4
5
6
Power  
Communications  
Video Out  
Temp/Speed  
Not Used  
1
2
3
6
5
4
Inside the boat there is often a channel or conduit used for other wiring, this can be used to route cables.  
Be sure to route the cables as far as practical from the antenna cable of VHF radios or tachometer cables  
to reduce the possibility of interference. The GPS receiver cable should not be cut, and care should be used  
not to damage the cable insulation.  
Basic installation tasks that you must perform include:  
• Installing the control head (choosing either gimbal or in-dash mounting)  
• Installing the GPS Receiver  
• Testing the complete installation.  
NOTE: Accessories may require a separate purchase. You can visit our website at www.humminbird.com  
to order these accessories online or contact our Customer Resource Center at 1-800-633-1468.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Head Installation  
You have two choices for mounting your 1100 Series™ control head, Gimbal mounting, where you use a  
surface on the boat, such as the dash, to mount the control head so that it can be tilted up or down, or In-  
dash mounting.  
Gimbal Mounting the Control Head  
If you are gimbal mounting the Humminbird® 1100 Series™, you can pre-assemble the unit in order to plan  
the best mounting location.  
1
Washer  
2
3
Gimbal Knob  
1
Gimbal Mounting Bracket  
2
3
In addition to the hardware supplied with your control head, you will need a powered hand drill and  
various drill bits, various hand tools, including a Phillips head screwdriver, a socket wrench and a flat head  
screwdriver, a marker or pencil, safety glasses and dust mask, and marine-grade silicone sealant.  
1. Place the control head into the gimbal bracket. Make sure that the straight side of the gimbal arm  
is against the back side of the control head.  
2. Place a 1" (25 mm) diameter black washer on the gimbal knob and then thread the knob and  
washer into the housing. Tighten the gimbal knob to secure the 1100 Series™ control head to the  
mount. Repeat step 2 for the other side.  
You can now place the control head in various locations to decide which is best for mounting. Rotating the  
mounting bracket to the top of the control head will allow for overhead mounting. The chosen mounting  
area should allow for sufficient room so the control head can pivot through the full tilt range and allow for  
easy removal and installation.  
NOTE: You can drill the cable pass hole underneath the gimbal bracket, allowing you to thread the cables through  
the large center hole in the mount; however, if you cannot drill the hole directly under the mounting bracket, then  
you will need to drill the cable pass hole behind the bracket, and will need to mount the hole cover there instead.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: When drilling holes in fiberglass hulls, it is best to start with a smaller bit and use progressively larger drill  
bits to reduce the chance of chipping or flaking the outer coating. Fill all holes with marine grade silicone sealant.  
NOTE: You must have underside access to the mounting location to pass the cables through to the surface. Also,  
make sure that the mounting surface is adequately supported to protect the control head from excessive wave  
shock and vibration and provide visibility while in operation.  
NOTE: Go to the installation instructions applicable to your GPS Receiver and accessories. Make the required  
installations and then run the cables to your control head mounting location. Do not cut any cabling (except the  
power cable). If your cables are too short, extensions are available from your local dealer or online from  
www.humminbird.com.  
3. After the mounting location has been determined, loosen the gimbal knobs and remove the  
control head from the gimbal bracket.  
NOTE: Alternate hole patterns are available on the gimbal mounting bracket, and may match existing holes on  
the boat. You may choose to use one of these alternate hole patterns.  
4. Place the gimbal bracket in the chosen position on the mounting surface and mark the four  
mounting screw locations using a pencil or center punch.  
1
1
Mounting Screws  
Washer  
2
3
Gimbal Mounting Bracket  
3
2
5. Set the gimbal bracket aside and drill the four mounting screw holes using a 5/32"  
(4.0 mm) drill bit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6a. If the cables must pass through a hole directly beneath the mounting bracket, mark and drill an  
additional 1" (25 mm) hole centered between the four mounting holes. Route the cables through  
the 1" hole. Place the gimbal over the mounting surface hole, then use it to mark the position of  
the two mounting screws, closest to the center large hole. Remove the gimbal and drill the two  
mounting holes using a 9/64" (3.5 mm) bit. Do not install the hole cover at this time.  
or...  
6b. If the cables cannot be routed directly beneath the mounting bracket, mark and drill a 1" (25 mm)  
hole that will allow you to run the cables close to the bracket. Pass the cables through the 1" (25  
mm) hole, routing the cables through the grommet and pressing the grommet into place. Place  
the hole cover over the mounting surface hole, then use it to mark the position of the two  
mounting screws. Remove the hole cover, drill the two mounting holes using a 9/64" (3.5 mm) bit,  
fill them with marine-grade silicone sealant, then replace the hole cover and insert the #8 Phillips  
countersink wood screws. Hand-tighten only.  
7. Place the mounting bracket on the mounting surface aligned with the drilled holes and fill the  
mounting holes with marine grade silicone sealant. Insert the four #10 Slotted-Hex wood screws  
into the mounting holes. Hand-tighten only.  
8. If the cable pass through hole is beneath the mounting bracket, you will need to install the hole  
cover after you have routed all cables. Place the hole cover over the mounting bracket cable pass  
thru hole and align with holes drilled in step 6a. Insert the #8 Phillips countersink wood screws.  
Hand tighten only.  
NOTE: Be sure that the cables pass through the slots on the hole cover and that there is enough cable slack to  
allow for the control head to pivot through its full tilt range. Extra cable slack will also help when  
connecting/disconnecting the cables.  
Cables Routed Directly Beneath Mounting Bracket  
2
1
Gimbal Mounting Bracket  
Hole Cover  
2
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cables Routed Behind Mounting Bracket  
1
Gimbal Mounting Bracket  
Grommet  
2
3
Hole Cover  
3
1
2
9. Thread the cables through the opening in the back of the cable collector cover.  
10. Insert cable connectors into the proper recesses on the cable collector insert. The cable  
connectors are keyed to prevent reverse installation, so be careful not to force the connectors into  
the wrong slots. If you don’t have a cable for every hole in the insert, install the blank plugs to  
protect the control head from the weather.  
Inserting the Cables into the Cable Connector Insert  
5
6
1
2
4
3
1
2
3
Power  
Not Used  
Cable Collector Cover  
Cable Collector Insert  
4
5
6
Communications  
Temp/Speed  
11. Line up the cable collector insert and cover, with the keying feature, then slide the cover into  
place on the insert.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Cable Collector  
1
Cable Collector Insert  
Screws  
2
3
Cable Collector Cover  
1
2
3
12. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws  
provided.  
13. Place the control head back onto the mounting bracket. Plug the assembled cable collector into the  
back of the control head, pushing gently but steadily until you feel the collector snap into place.  
Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful not to  
force the connectors into the wrong sockets. Adjust the control head to the desired viewing angle  
and secure by tightening the gimbal knobs.  
Plugging the Assembled Cable Connector into the Back of the Control Head  
NOTE: You may wish to dress the cabling with nylon wire ties in order to hold the cables together and create a  
cleaner assembly.  
The Humminbird® 1100 Series™ control head is now ready for operation.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In-Dash Mounting the Control Head  
If you are in-dash mounting the control head, start by placing the components on the surfaces where you  
intend to install them before installation. Make sure that the surfaces you have chosen provide adequate  
protection from wave shock, and that all cables can reach the control head.  
NOTE: If a cable is too short for your application, extension cables are available. Call Humminbird® Customer  
Support at 1-800-633-1468 for more information.  
Parts and tools specific to In-dash mounting are:  
• Threaded rods and hardware  
• In-dash mounting foam pads  
• In-dash mounting template  
• Reciprocating saw for cutting dash material  
• Masking tape to hold mounting template in place.  
1. Locate a suitable, flat area of the dash to mount the control head. The control head requires a  
depth of at least 4 inches (102 mm).  
2. Tape the paper In-Dash Mounting template to the desired in-dash mounting location.  
3. At a location inside the dotted line on the template, drill a hole large enough to insert blade of  
reciprocating saw. In addition, drill the 4 mounting hole locations using a 3/16" drill bit. Carefully begin  
cutting toward the dotted line, then follow the dotted line around the template. Remove the template  
when finished.  
4. Insert and tighten the four threaded rods into the four threaded inserts located on the back side  
of the control head. Peel off the adhesive-backed foam pads and place them on the back of the  
control head; make sure you notice the difference between the longer top/bottom and shorter  
side pads.  
1
2
6
1
Threaded Rod  
Washer  
5
2
3
4
5
6
6
Wing Nut  
Lock Washer  
Cut Away Dash  
Foam Pads  
3
4
6
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Insert the control head through the mounting hole from the front side of the dash. Place a  
washer, lock washer, and wing nut onto each threaded rod and tighten fully.  
6. Thread the cables through the opening in the back of the cable collector cover.  
7. Insert cable connectors into the proper recesses on the cable collector insert. The cable  
connectors are keyed to prevent reverse installation, so be careful not to force the connectors into  
the wrong slots. If you don’t have a cable for every hole in the insert, install the blank plugs to  
protect the control head from the weather.  
Inserting the Cables into the Cable Connector Insert  
5
6
1
2
4
3
1
2
3
Power  
Not Used  
Cable Collector Cover  
Cable Collector Insert  
4
5
6
Communications  
Temp/Speed  
8. Line up the cable collector insert and cover, with the keying feature, then slide the cover into  
place on the insert.  
Assembling the Cable Collector  
1
Cable Collector Insert  
Screws  
2
3
Cable Collector Cover  
1
2
3
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws  
provided.  
10. Plug the assembled cable collector into the back of the control head, pushing gently but steadily  
until you feel the collector snap into place. Cable connectors and cable sockets are keyed to  
prevent reverse installation, so be careful not to force the connectors into the wrong sockets.  
NOTE: You may wish to dress the cabling with nylon wire ties in order to hold the cables together and create a  
cleaner assembly.  
NOTE: It is very important that the cable collector is used and secured in place in the In-Dash installation.  
The Humminbird® 1100 Series™ control head is now ready for operation.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Control Head Power Cable to the Boat  
A 6' (2 m) long power cable is included to supply power to the control head. You may shorten or lengthen  
the cable using 18 gauge multi-stranded copper wire.  
CAUTION: Some boats have 24 or 36 Volt electric systems, but the control head MUST be connected to a 12 VDC  
power supply.  
The control head power cable can be connected to the electrical system of the boat at one of two places:  
a fuse panel usually located near the console, or directly to the battery.  
GROUND  
NOTE: Make sure that the power cable is disconnected from the control head at the beginning of this procedure.  
NOTE: Humminbird® is not responsible for over-voltage or over-current failures. The control head must have  
adequate protection through the proper selection and installation of a 3 Amp fuse.  
1a. If a fuse terminal is available, use crimp-on type electrical connectors (not included)  
that match the terminal on the fuse panel. Attach the black wire to ground (-), and  
the red wire to positive (+) 12 VDC power. Install a 3 Amp fuse (not included) for  
protection of the unit. Humminbird® is not responsible for over-voltage of over-  
current failures.  
or...  
1b. If you need to wire the control head directly to a battery, obtain and install an inline  
fuse holder and a 3 Amp fuse (not included) for the protection of the unit.  
Humminbird® is not responsible for overvoltage or over-current failures.  
NOTE: Your unit will detect when your battery voltage is too low or too high, and will display  
either Input Voltage Low or Input Voltage High messages if these limits are exceeded. If you  
turn the Low Battery Alarm on using the Alarms Main Menu, your unit will use your settings.  
If you do not turn the Low Battery Alarm on, the unit will use these limits: 7.5 to 7.9 VDC for  
the low end, and 21 to 21.2 VDC for the high end.  
NOTE: In order to minimize the potential for interference with other marine electronics, a separate power source  
(such as a second battery) may be necessary.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GPS Receiver Installation  
To optimize performance of the GPS receiver, mount it in an area that has full exposure to the sky. The  
effective area of reception is 10° above the horizon. Different circumstances determine the mounting  
method appropriate for your GPS receiver.  
If you have…  
Then use:  
An existing antenna stem with standard 1" –  
14 thread stem  
Stem Mount with Existing  
1” - 14 Thread Stem  
Access for cable routing under the mounting  
location  
Access Under Mounting Location  
No access under the mounting location  
No Access Under Mounting Location  
The pinouts of the NMEA cable are as follows:  
• Red Wire, +12V (output voltage only)  
• Black Wire, Ground  
• White Wire, NMEA Out.  
CAUTION! Please use caution before connecting the red +12V wire to any other NMEA device. This is an output  
voltage provided by the control head and GPS receiver and should only be connected to those NMEA devices that  
need a 12 volt input.  
Stem Mounting with an Existing 1" - 14 Thread Stem  
Follow these steps to stem mount the GPS receiver:  
NOTE: If you have an existing stem for mounting the GPS receiver, proceed directly to step 2 of the following  
procedure.  
1. Determine the best location to mount your GPS receiver. Preplan and test the cable routing to  
your control head before any drilling or cutting of your boat surfaces. If you have purchased  
hardware to stem mount your GPS receiver, follow the instructions included with that hardware  
to mount the stem (antenna pole).  
NOTE: AS-EC10 10' extension cables are available from Humminbird® if your planned routing exceeds 20', (6 m).  
Maximum cable length, including extensions, should not exceed 50' (16 m).  
NOTE: Remember to seal screw holes and drilled holes as needed with marine-grade silicone sealant to protect  
your boat from water damage.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Receiver  
1
Receiver Base  
Stem Pipe  
2
3
2
3
2. Screw on the receiver base to the stem first, making sure that the stem pipe does not protrude  
from the receiver base. This adds protection to the cable when pulling it through the pipe stem.  
In addition to this, de-burr the pipe edges to reduce cable abrasion.  
3. Use electrical tape to secure the NMEA cable to the receiver cable as shown.  
NOTE: Leave the NMEA cable secured to the receiver cable unless needed. This will make removing the receiver  
easier.  
4. Route the GPS receiver cable through the stem and continue with the planned route you chose  
in step 1.  
5. Attach the GPS receiver to its base using the included #6 - 7/8" screws.  
3
1
1
2
3
NMEA Cable Taped  
NMEA Cable Out  
Mounting Screws  
2
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Access Under Mounting Location  
Follow these steps to deck mount the GPS receiver when routing the cable down through the mounting  
location:  
1. Determine the best location, then test route the 20' (6 m) cable from the mounting location to the  
control head.  
NOTE: Installation details may vary with unit configuration.  
2. Mark the mounting location and drill a 3/4" (19 mm) hole for the cable and cable plug. Route the  
cable.  
3. Cover the cable hole with the receiver. Make sure the receiver is flush on the surface and mark  
the two mounting holes with a pencil or punch.  
4. Move the receiver to the side and drill two pilot holes using a 9/64" (3.5 mm) bit.  
NOTE: Remember to seal screw holes and drilled holes as needed with marine-grade silicone sealant to protect  
your boat from water damage.  
5. Align the GPS receiver screw holes over the pilot screw holes and attach with the  
#8 - 1 1/4" Phillips head screws. Hand tighten only!  
NOTE: If the mounting surface is thin and made of a lighter material, a backing material may be needed below  
the mounting surface.  
Access Under Mounting Location  
No Access Under Mounting Location  
No Access Under Mounting Location  
Follow these steps to deck mount the GPS receiver in a situation where you must route the cable to the  
side because there is no space for a cable underneath the mounting location.  
1. Determine the best location, then test route the cable from the mounting location to the control  
head.  
NOTE: AS-EC10 10' extension cables are available from Humminbird® if your planned routing exceeds 20', (6 m).  
Maximum cable length, including extensions, should not exceed 50' (16 m).  
2. Confirm the cable length is good and route the cable from the receiver to the control head. If  
holes are required to route the cable, they must be 3/4" (19 mm) to allow for the cable connector.  
Secure the NMEA cable with electrical tape.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Remember to seal screw holes and drilled holes as needed with marine-grade silicone sealant to protect  
your boat from water damage.  
3. The GPS receiver has two wire routing notches. Use the cable notch closest to the intended cable  
route.  
4. With the cable routed, position the GPS receiver in the planned mounting location and mark the  
mounting holes with a pencil or punch.  
5. Move the GPS receiver to the side and drill the two 9/64" (3.5 mm) pilot holes.  
6. Align the GPS receiver's screw holes over the pilot screw holes and attach with the  
#8 - 1 1/4" Phillips head screws. Hand tighten only!  
Finish Routing the Cable and Check GPS Receiver Operation  
After installing a GPS receiver, you should perform the following procedure to finish routing the GPS cable  
to the control head and to check to make sure that the control head is working correctly.  
1. Secure the cable along its path to the control head as needed with cable ties.  
2. Plug the GPS receiver cable into the Communications port on the control head. See Testing the  
System Installation to use the System Status start-up option and/or the GPS Diagnostic View to  
confirm a good installation.  
Inserting the Cables into the Cable Connector Insert  
5
6
1
2
4
3
1
2
3
Power  
Not Used  
Cable Collector Cover  
Cable Collector Insert  
4
5
6
Communications  
Temp/Speed  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Testing the System Installation  
After you have completed the installation of the control head and any other accessories such as the GPS  
receiver, and have made all the cabling connections required, you must test the installation before using  
the system.  
To test the installation:  
1. Press the POWER/LIGHT key on the control head once to turn on the control head. (There will be  
an audible sound to let you know that you pressed the key, and the initial Title screen will appear.)  
If the unit does not power up, make sure that power is available. While the Title screen is shown  
on the display, press the MENU key to display the Start-Up Options menu. Use the UP or DOWN  
4-WAY Cursor keys to position the cursor, then the RIGHT Cursor key to select System Status from  
the Start-Up Options menu (see the Start-Up Options Menu section for more information about  
these menu choices). The System Status Self Test screen will appear.  
NOTE: If you wait too long, the system will default to whichever menu mode happens to be highlighted, and you  
will have to start again.  
2. Self Test displays results from the internal diagnostic self test, including unit serial number, Printed  
Circuit Board (PCB) serial number, software revision, total hours of operation and the input voltage.  
See System Status for more information about the Self Test.  
3. From the System Status screen, view accessory connections by pressing the VIEW key. See  
System Status for more information about the Accessory Test.  
NOTE: The speed will be detected only if the paddlewheel has moved since the 1100 Series™ has been  
powered up.  
4. From the System Status screen, see a GPS Diagnostic View by pressing the View key. GPS  
Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart  
shows the location of each visible GPS satellite with its satellite number and a signal strength  
bar. A dark gray bar indicates that the satellite is being used to determine your current position.  
A light gray bar indicates that the satellite is being monitored, but is not yet being used. See  
System Status for more information about the GPS Diagnostic View.  
5. You are ready for on the water operation.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started - Using Your 1100 Series™  
Your 1100 Series™ Chartplotter user interface is easy to use. A combination of keys, different views, and  
situation-specific, customizable menus allows you to control what you see on the color display. Refer to  
the following illustration, and see Key Functions, Views, and The Menu System for more information.  
7
2
3
8
9
4
5
6
1
10  
12  
11  
7
8
9
1
Screen  
VIEW Key  
MENU Key  
EXIT Key  
ZOOM (+/-) Keys  
4-WAY Cursor Control Key  
INFO Key  
2
3
4
5
6
7
View Preset Keys 10  
POWER/LIGHT Key 11  
MMC/SD Card Slot 12  
14  
MARK Key  
GOTO Key  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Up the Control Head  
Turn on your Chartplotter by pressing the POWER/LIGHT key. The Title screen is displayed until the  
Chartplotter begins operation. After the Title screen is displayed, a 30 second Navigation Warning screen  
is shown. Press the MENU key during the time that the Title screen is displayed to view the Start-Up Menu  
in order to choose Simulator mode. Press the EXIT key during the Navigation Warning to enter into Normal  
mode. If Demonstration is enabled, and you do NOT press the EXIT key, or any other key, during the  
Navigation Warning, your Chartplotter will automatically enter Demonstration Mode. Demonstration is  
enabled by default, unless you turn it off (see Setup Menu: Demonstration).  
1100 Series™ Chartplotter Title Screen  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What’s On the Display  
The 1100 Series™ Chartplotter can display a variety of useful information. Chart Bird's Eye Combo View  
1
2
1
Cursor Info Box: indicates the  
Latitude and Longitude of the cursor  
position, the distance to travel to the  
cursor position and the bearing to the  
cursor position is shown with a GPS  
receiver. A waypoint can be marked  
at the cursor position for later  
11  
retrieval and use with a GPS receiver.  
2
Latitude and Longitude  
Position of Cursor  
3
4
5
6
7
Distance: Distance to Cursor  
Bearing: Bearing to Cursor  
Waypoint  
9
Active Cursor Icon  
Boat Icon  
8
Course Projection Line: Arrow  
extending from the bow of the boat  
that projects your current course, and  
shows where the boat will go if you  
continue on your present course.  
7
14  
15  
16  
9
Route: Two or more linked  
waypoints that show intended  
navigation and the shortest path  
from one waypoint to the next.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
is shown with navigation active.  
3
4
10  
Track: Detailed position history,  
displayed as a breadcrumb trail of  
trackpoints.  
11  
12  
13  
14  
Cartography  
Map Scale  
Selectable Readout Boxes  
10  
Course: the current direction  
the boat is traveling measured in  
degrees from North.  
7
9
15  
16  
17  
Bearing: Bearing to Waypoint  
6
5
XTE: Cross Track Error  
12  
8
Speed: the measurement of the  
boat’s progress across a given  
distance; the speed measurement  
provided by GPS.  
11  
18  
19  
20  
20  
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
13  
DTG: Distance to Go to Waypoint  
18  
17  
19  
20  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Functions  
Your 1100 Series™ user interface consists of a set of easy-to-use keys that work with various on-screen  
views and menus to give you flexibility and control over your fishing experience. Your control head has the  
following keys:  
• POWER/LIGHT key  
• EXIT key  
• VIEW key  
• 4-WAY Cursor Control key  
• MENU key  
• VIEW PRESET keys.  
• MARK key  
• GOTO key  
• INFO key  
• ZOOM (+/-) keys.  
POWER/LIGHT Key  
The POWER/LIGHT key is used to turn the Chartplotter on and off, and also to adjust the  
backlight and background color of the display. Press the POWER/LIGHT key to turn the  
unit on. The Title screen is then displayed until the Chartplotter begins operation. See  
Powering Up the Unit for a more detailed explanation of the different modes you can  
select on power up.  
To adjust the backlight or to adjust the display background color,  
press the POWER/LIGHT key to access the Light and Background  
menu. Use the 4-WAY Cursor key to select Light or Background and  
then use the LEFT or RIGHT Cursor key to change the settings. Press  
EXIT to exit the Light and Background menu.  
Press and hold the POWER/LIGHT key for 3 seconds to turn the unit  
off. A message will appear telling you how many seconds there are  
until shutdown occurs. Your 1100 Series™ should always be turned  
off using the POWER/LIGHT key. This will ensure that shutdown  
occurs properly and any menu settings will be saved.  
VIEW Key  
The VIEW key is used to cycle through all available views. Press the VIEW key to advance  
to the next view. Repeatedly pressing VIEW cycles through all views available. Views can  
be hidden to optimize the system to your fishing requirements (see View Menu Tab).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU Key  
The MENU key is used to access the menu system.  
Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-Up Options  
menu.  
X-Press™ Menu - Press the MENU key once for the X-Press™ Menu. The X-Press™ Menu allows you to  
access frequently-used settings without having to navigate through the whole menu system. When the X-  
Press™ Menu is displayed, you can use the UP or DOWN Cursor keys to move to a particular menu choice.  
As soon as you alter a parameter (using the RIGHT or LEFT Cursor keys) the X-Press™ Menu will collapse  
temporarily, and the screen will update if it is affected by your menu setting change, allowing you to see  
the effects of your action immediately. Reactivate the X-Press™ Menu by using the UP or DOWN Cursor  
keys.  
Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main Menu System is  
organized under tabbed headings to help you find a specific menu item quickly: Alarms, Navigation, Chart,  
Setup, Views, and Accessories tabs are part of your tabbed Main Menu System. Use the LEFT or RIGHT 4-  
WAY Cursor Control key to select a tab; then use the DOWN or UP key to select the menu item, and the LEFT  
or RIGHT key to alter a menu setting.  
4-WAY Cursor Control Key  
The 4-WAY Cursor Control Key has multiple functions, depending on the situation:  
Active Cursor - In any Bird's Eye View, the 4-WAY Cursor Control key controls the motion  
of the eyepoint. In any Chart View, the 4-WAY Cursor Control key pans the charts.  
NOTE: You can also make the cursor move diagonally by pressing in between two of the arrows on the 4-WAY  
Cursor Control key.  
Menu Selection - Use the DOWN or UP arrow keys to select a menu choice from the menu list, then use  
the LEFT or RIGHT arrow keys to change a menu setting.  
NOTE: Menu choices are implemented and saved immediately - no further action is required.  
VIEW PRESET Keys  
The VIEW PRESET keys are used to program your three favorite views for quick retrieval.  
Instead of using the VIEW key to cycle through every view to find the one you want, you  
can program the VIEW PRESET keys to display a specific view immediately. To program each VIEW PRESET  
key, use the VIEW key to cycle to the view you want to store. Press and hold one of the VIEW PRESET keys  
for several seconds. A chime will indicate that the view has been saved. You can store up to three views,  
one on each key.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXIT Key  
The EXIT key has multiple functions, depending on the situation:  
• If an alarm is sounding, pressing EXIT will cancel the alarm.  
• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.  
• If a menu is active, pressing EXIT will return to the previous level in the menu system.  
• Pressing EXIT will cycle through the available views in reverse order.  
• If the Cursor is active, pressing EXIT will remove the cursor from the display. Pressing Exit will also  
remove any display boxes or waypoint thumbnail views from the screen.  
INFO Key  
Press the INFO key while in any navigation view to display information about objects that  
are nearest to an active cursor.  
If the cursor is not active, the following menu will be displayed. Use the  
4-WAY Cursor Control key to select Nearest Port, Nearest Tide Station  
or Nearest Current Station, then use the RIGHT Cursor key to display  
the requested information.  
NOTE: In non-NVB models,the built-in UniMap™ does not contain Port, Tide  
or Current information, and this information is only available from optional  
purchase MMC/SD cards. In NVB models, your units also comes with Port,  
Tide or Current information.  
On the Chart View, you can use the INFO key to get information on the chart objects near the cursor as  
well as to view Screen Snapshots. See Screen Snapshot View for more information.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MARK Key  
Press the MARK key while in any view to mark the position of a waypoint, either at the  
current boat location, or, if the Cursor is active, at the current Cursor location.  
The MARK key only functions if you have the GPS receiver connected, or if you have  
enabled Screen Snapshot from the Accessories menu tab. If you have enabled the Screen Snapshot  
feature, pressing the MARK key still creates a waypoint, but it also captures the screen image to the  
optional-purchase MMC/SD card and will add a thumbnail to the waypoint.  
NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature to work.  
Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled but there  
is no GPS receiver connected, pressing the MARK key will capture the screen image and display an error  
saying that a GPS position fix is required to create a waypoint.  
GOTO Key  
The GOTO Key has multiple functions, depending on the situation:  
• If the Cursor is active, pressing the GOTO key while in any view creates a waypoint and starts  
navigation towards that waypoint. If the Cursor is not active, pressing the GOTO key displays the  
list of waypoints, so that you can select the waypoint towards which you want to navigate.  
• If the GOTO key is pressed and held for more than 1.5 seconds, the Man Overboard (MOB) function  
is activated. When MOB is activated, an MOB waypoint, which is a permanent, sharable waypoint  
with a large, distinctive icon, is created at the boat's current position (regardless of whether the  
chart cursor is active or not). Any current navigation will be cancelled and the current route  
discarded without user notification, and MOB navigation begins immediately. The view is  
switched to the Chart View automatically when MOB is activated, and it is not possible to activate  
MOB or modify the current route without first canceling MOB navigation. Any press of the GOTO  
key, or selection of a GOTO menu item, will cause an error beep and a short message will be  
displayed to the user that will disappear after 2 seconds.  
ZOOM (+/-) Keys  
Press the - or + ZOOM keys while in any of the Navigation Views to change the scale of  
the view to appear closer or farther away.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Views  
The views available on your 1100 Series™ are:  
Bird’s Eye  
Bird’s Eye  
View  
No Readouts  
View  
GPS  
Diagnostic  
View  
Chart/Bird’s Eye  
Comboo View  
Accessory  
Test View  
Chart/Chart  
Comboo View  
Chart  
No Reaadouts  
View  
Self Test  
View  
ScSrcereenenSnSanpasphhoott  
VVieieww  
Chart  
View  
Chart/Bird’s Eye  
Chart/Bird’s Eye  
Chart  
Instrrument  
View  
Instrument  
Instrument  
View  
View  
• Bird’s Eye No Readouts View  
• Bird's Eye View  
• Chart Instrument View  
• Chart/Bird's Eye Instrument View  
• Screen Snapshot View  
• Self Test View  
• Chart/Bird's Eye Combo View  
• Chart/Chart Combo View  
• Chart No Readouts View  
• Chart View  
• Accessory Test View  
• GPS Diagnostic View.  
GPS Diagnostic View is the default view until GPS communications are established. At that point, all the  
other views become available. When the VIEW key is pressed, the display cycles through the available  
views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any  
view can be hidden or displayed as part of the view rotation using the Views Menu tab. See Start-Up  
Options Menu for information about the Self Test, Accessory Test, and GPS Diagnostic Views.  
NOTE: When you change any menu settings that affect the display, the view will update immediately (i.e. you  
don’t have to exit the menu to apply the change to the screen).  
Views and Readouts  
All views have an Information Bar on the bottom of the screen, consisting of readouts that change from view  
to view. You can customize the information displayed in individual readouts on many views, including  
suppressing a particular readout so that nothing is displayed; the readouts displayed depend on the view and  
whether you are navigating (see Navigation X-Press™ Menu, Select Readouts, Select Nav Readouts, and  
Select Instrument Readouts for more information).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bird's Eye No Readouts View  
Bird's Eye No Readouts View shows a 3D perspective view like all the other Bird's Eye Views, but without  
readouts. See Bird's Eye View for more information.  
Bird's Eye No Readouts View (Standard)  
1
2
3
4
3
4
Track  
Waypoint  
Boat Icon  
1
2
Cartography  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bird's Eye No Readouts View (Navigating)  
1
2
3
4
5
6
7
5
6
7
Route  
Track  
Cartography  
1
Waypoint  
2
3
4
Boat Icon  
Arrival Alarm Limits  
Off Course Limits  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bird's Eye View  
Bird's Eye View shows a 3D perspective view of the track and the chart land contour from a point above  
and behind the boat (the eye point).  
As the boat turns, the eye point moves to follow the boat. When you press the 4-WAY Cursor key in any of the  
Bird’s Eye Views, the position of the eye point will shift. This allows you to move and turn the eye point so that  
you can look off to the sides, or even behind the boat. Pressing the RIGHT or LEFT arrow keys on the 4-WAY Cursor  
key turns the eye point right or left, while pressing the UP arrow key moves the eye point forward, and pressing  
the DOWN arrow key moves the eye point backward.  
Pressing the EXIT key moves the eye point back to its original position behind and above the boat.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be customized to suit  
your needs.  
NOTE: If all selectable readout boxes are turned off below the Bird's Eye pane, the window will stretch  
to fill the whole vertical pane. See Navigation X-Press™ menu: Select Readouts for more information.  
Bird's Eye View (Standard)  
8
7
6
3
5
2
1
4
5
6
7
1
VLT: Voltage  
Boat Icon  
Course: the current direction the boat is traveling  
measured in degrees from North.  
Time  
2
3
4
Cartography  
Waypoint  
Latitude and Longitude Position of Boat  
8
Speed: the measurement of the boat’s progress across a  
given distance; the speed measurement provided by GPS.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bird’s Eye View (Navigating)  
1
12  
11  
10  
1
9
6
7
2
3
4
5
8
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
DTG: Distance to Go to Waypoint  
Track  
1
Next Waypoint  
6
7
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
8
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
9
Boat Icon  
10  
11  
12  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Route  
Speed: the measurement of the boat’s progress across a  
given distance, and is the speed measurement provided by GPS.  
Cartography  
NOTE: If there is only one waypoint in a route, the Next Waypoint and the End Waypoint info boxes will display  
the same information.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Bird’s Eye Combo View  
Chart/Bird’s Eye Combo View shows both the Chart and Bird’s Eye views in a combination split screen. You  
can perform any of the functions for either of these views, but only when the view you want to control  
is selected as the active side (see Navigation X-Press™ Menu: Active Side for more information). A green  
arrow points to the side that is active. You can also adjust the size of the left side of a split screen  
(see Navigation X-Press™ Menu: Split Position for more information).  
NOTE: See Bird’s Eye Views and Chart Views for more information about each side of this view.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be  
customized to suit your needs.  
Chart/Bird’s Eye Combo View (Standard)  
6
10  
7
8
9
6
8
3
5
2
1
4
5
6
7
1
VLT: Voltage  
Cartography  
Map Scale  
Boat Icon  
Course: the current direction the boat is traveling  
measured in degrees from North.  
Time  
2
3
4
Latitude and Longitude Position of Boat  
8
9
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Course Projection Line  
3D View Outline 10  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Bird’s Eye Combo View (Navigating)  
13  
1
10  
14  
1
11  
12  
13  
10  
1
12  
9
6
7
2
4
3
5
8
TTG: Time to Go to Waypoint  
1
Next Waypoint  
7
DTG: Distance to Go to Waypoint  
Chart Window  
Cartography  
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
8
9
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
10  
11  
Map Scale  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Boat Icon  
12  
13  
14  
Speed: the measurement of the boat’s progress across a given distance;  
the speed measurement provided by GPS.  
Route  
Bird’s Eye Window  
6
NEXT: Next Waypoint in the Route  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Chart Combo View  
Chart/Chart Combo View shows two versions of the Chart view in a combination split screen, so that you can  
see the position of the boat on one side while you zoom in or perform other functions on the other. You can  
perform any of the functions for the Chart view, but only on the side of the view you have selected as the active  
side (see Navigation X-Press™ Menu: Active Side for more information). A green arrow points to the side  
that is active. You can also adjust the size of the left side of a split screen (see Navigation X-Press™ Menu:  
Split Position for more information).  
NOTE: See Chart Views for more information about each side of this view.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be customized to suit  
your needs.  
Chart/Chart Combo View (Standard)  
11  
11  
9
9
10  
10  
8
7
7
6
8
6
3
5
2
1
4
6
7
8
1
Cartography  
Course: the current direction the boat is traveling  
measured in degrees from North.  
Course Projection Line  
Waypoint  
Time  
2
3
4
Latitude and Longitude Position of Boat  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Map Scale  
9
Boat Icon  
10  
Track 11  
VLT: Voltage  
5
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: All views except the Bird's Eye/Chart Instrument View share the same set of 5 selectable readouts that  
can all be set one way for navigation mode and another way for non-navigation mode. When you change the  
readout displays on one of these views, you also are changing them on all the other views that share the same  
configuration. See Navigation X-Press™ menu: Select Readouts and Select Nav Readouts for more  
information.  
Chart/Chart Combo View (Navigating)  
14  
14  
12  
12  
10  
13  
13  
11  
11  
9
9
1
1
1
6
7
2
4
3
5
8
TTG: Time to Go to Waypoint  
DTG: Distance to Go to Waypoint  
Route  
1
Next Waypoint  
7
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
8
9
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
Course Projection Line  
Boat Icon  
10  
11  
12  
13  
14  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Track  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Map Scale  
Cartography  
6
NEXT: Next Waypoint in the Route  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart No Readouts View  
Chart No Readouts View shows cartography like all the other Chart Views, but without readouts. See  
Chart Views for more information.  
Chart No Readouts View (Standard)  
1
6
5
2
4
3
1
2
3
Map Scale  
Waypoint  
Boat Icon  
Track  
4
5
6
Cartography  
Course Projection Line  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart No Readouts View (Navigating)  
1
7
6
5
2
4
3
1
Map Scale  
Cartography  
Route  
Boat Icon  
Track  
5
6
7
2
3
4
Course Projection Line  
Next Waypoint  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart View  
Chart Views - The standard Chart, Chart No Readouts, and Chart/Chart Combo Views, as well as the Chart  
side of the Chart/Bird's Eye Combo View and the Chart/Bird's Eye Combo Instrument View, all show  
cartography from the built-in UniMap™ or an optional MMC/SD map for the area surrounding your current  
position. The current track (also known as the position history or breadcrumb trail) showing where the boat  
has been, along with saved tracks, waypoints, and the current route (when navigating), are overlaid on the  
chart. You can use the 4-WAY Cursor Control key to shift/pan the chart to another area. You can use the  
ZOOM (+/-) keys to zoom in and out. You can use the INFO key to get information on the chart objects near  
the cursor as well as to view Screen Snapshots.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be customized to suit  
your needs.  
Chart View (Standard) with optional-purchase Navionics® Cartography  
11  
10  
12  
8
9
7
6
3
5
2
1
4
6
7
8
9
1
Cartography  
Declutter Icons  
Boat Icon  
Course: the current direction the boat is traveling  
measured in degrees from North.  
Time  
2
3
4
Latitude and Longitude Position of Boat  
Track  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Course Projection Line  
10  
Waypoint 11  
VLT: Voltage  
5
Map Scale 12  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: All views except the Bird's Eye/Chart Instrument View share the same set of 5 selectable  
readouts that can all be set one way for navigation mode and another way for non-navigation mode.  
When you change the readout displays on one of these views, you also are changing them on all the  
other views that share the same configuration. See Navigation X-Press™ menu: Select Readouts  
and Select Nav Readouts for more information.  
Chart View (with Cursor) with optional-purchase Navionics® Cartography  
1
2
3
4
5
6
7
12  
8
9
11  
10  
15  
17  
14  
13  
16  
Cursor Info Box  
Boat Icon  
1
10  
11  
Latitude and Longitude Position of Cursor  
Distance: Distance to Cursor  
Bearing: Bearing to Cursor  
Cartography  
Track  
2
3
4
5
6
7
Map Scale  
12  
13  
Course: the current direction the boat is traveling  
measured in degrees from North.  
Time  
14  
15  
16  
Waypoint  
Latitude and Longitude Position of Boat  
Cursor  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Declutter Icons  
8
9
Course Projection Line  
VLT: Voltage  
17  
NOTE: Your Chart screen will automatically declutter and simplify as you zoom out. When you zoom out, all  
waypoint icons that might otherwise overlap each other will declutter the screen by changing into very small blue  
icons, and individual waypoint names will be hidden. When you're panning, and your cursor snaps to a waypoint  
that is using the declutter icon, that waypoint will display its full-size icon and name temporarily (until you move  
the cursor off of it). In addition, when a waypoint name will write on top of another waypoint, the name will be  
truncated until the cursor snaps to it. Different waypoints will use the declutter feature at different zoom levels.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart View (Navigating) with optional-purchase Navionics® Cartography  
1
11  
10  
13  
14  
9
12  
1
6
7
2
4
3
5
8
TTG: Time to Go to Waypoint  
DTG: Distance to Go to Waypoint  
Boat Icon  
1
Next Waypoint  
7
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
8
9
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
Route  
10  
11  
12  
13  
14  
Course Projection Line  
Track  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Cartography  
Map Scale  
6
NEXT: Next Waypoint in the Route  
NOTE: You may also choose Chart No Readouts View if you prefer.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Instrument View  
Chart Instrument View displays a digital panel at the top of the screen. This view provides a digital  
compass, XTE graphic, and up to 10 readouts.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be customized to suit  
your needs.  
Chart Instrument View (Standard)  
11  
12  
10  
9
13  
8
7
6
2
3
4
5
1
Course: the current direction the boat is traveling  
measured in degrees from North.  
5
6
1
Voltage  
Cartography  
Track  
2
3
Latitude and Longitude Position of Boat  
7
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
8
Boat Icon  
9
Waypoint  
Timer: Elapsed time with Speed accessory or  
GPS Receiver.  
10  
11  
12  
13  
Course Projection Line  
Compass  
Distance: Distance traveled with Speed accessory  
or GPS Receiver.  
4
XTE (Cross Track Error): Distance of Boat from Route  
Average Speed: Average speed reading with Speed  
accessory or GPS Receiver.  
Map Scale  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Instrument View (Navigating)  
1
2
3
4
5
6
7
8
5
18  
19  
20  
21  
13  
11  
9
1
14  
15  
12  
17  
10  
16  
ETA: Estimated time of arrival  
1
XTE (Cross Track Error): Distance of Boat from Route  
14  
15  
16  
DTG: Distance to Go to Waypoint  
2
3
4
5
6
7
Compass  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Cartography  
Course Projection Line  
Next Waypoint  
Boat Icon  
Timer: Elapsed time with  
Speed accessory or GPS Receiver.  
Distance: Distance traveled with  
Speed accessory or GPS Receiver.  
17  
Track  
8
9
Map Scale  
Average Speed: Average speed reading  
with Speed accessory or GPS Receiver.  
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
DTG: Distance to Go to Waypoint  
Voltage  
18  
19  
20  
21  
Course: the current direction the boat is traveling  
measured in degrees from North.  
10  
11 Time  
12 Latitude and Longitude Position of Boat  
13 END: Last waypoint in the route  
NOTE: If there is only one waypoint in a route, the Next Waypoint and the End Waypoint info boxes will display  
the same information, both for that next waypoint..  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Bird's Eye Instrument View  
Chart/Bird's Eye Instrument View displays a digital instrument panel at the top of the screen. This view  
provides a digital compass, XTE graphic, and up to 10 readouts.  
NOTE: Only the standard configuration readouts are shown in the graphics. Readouts can be customized to suit  
your needs.  
Chart/Bird’s Eye Instrument View (Standard)  
12  
13  
11  
11  
7
10  
9
8
8
7
6
10  
14  
3
5
2
1
4
Course: the current direction the boat is traveling  
measured in degrees from North.  
6
7
1
Chart Window  
Waypoint  
Boat Icon  
Map Scale  
Track  
2
3
4
Time  
8
Latitude and Longitude Position of Boat  
9
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
10  
11  
12  
13  
14  
Cartography  
Compass  
Timer: Elapsed time with Speed accessory  
or GPS Receiver.  
XTE (Cross Track Error): Distance of Boat from Route  
Distance: Distance traveled with Speed accessory  
or GPS Receiver.  
5
Bird’s Eye Window  
Average Speed: Average speed reading with Speed  
accessory or GPS Receiver.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Bird’s Eye Instrument View (Navigating)  
3
21  
16  
20  
20  
19  
22  
18  
19  
16  
17  
15  
18  
11  
5
6
7
9
1
3
12  
13  
14  
8
4
10  
2
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
1
Speed: the measurement of the boat’s progress across a  
given distance; the speed measurement provided by GPS.  
10  
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
END: Last waypoint in the route  
ETA: Estimated time of arrival  
DTG: Distance to Go to Waypoint  
VLT: Voltage  
11  
12  
13  
14  
15  
16  
17  
3
4
5
6
7
XTE (Cross Track Error): Distance of Boat from Route  
Time  
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
Chart Window  
Waypoint  
DTG: Distance to Go to Waypoint  
Latitude and Longitude Position of Boat  
Map Scale  
8
Boat Icon  
18  
19  
20  
21  
22  
Timer: Elapsed time with Speed accessory  
or GPS Receiver.  
Route  
Cartography  
Distance: Distance traveled with Speed accessory  
or GPS Receiver.  
9
Compass  
Average Speed: Average speed reading with Speed  
accessory or GPS Receiver.  
Bird’s Eye Window  
NOTE: If there is only one waypoint in a route, the Next Waypoint and the End Waypoint info boxes  
will display the same information, both for that next waypoint.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Snapshot View  
Screen Snapshot View displays and allows you to view screen snapshot thumbnails captured to an  
optional-purchase MMC/SD card installed in your unit. In addition, when you are in the Screen Snapshot  
View, Delete Image and Delete All Images are added to the X-Press™ menu.  
The Screen Snapshot View displays up to three screen snapshot thumbnails on the screen at a time; you  
may have to scroll using the 4-WAY Cursor keys to see the whole list of thumbnails in this view. The  
selected thumbnail will be highlighted with arrows.  
NOTE: The speed of the screen capture depends on the type of card you use; in general, SD cards  
capture the screen faster than MMC cards do.  
Screen Snapshot: When Screen Snapshot is enabled (from the Accessories menu tab), pressing the MARK  
key creates a saved screen capture (when you have an optional-purchase MMC/SD card installed). Once  
you have created a screen capture, a screen capture thumbnail is added to the Screen Snapshot View, and  
is available to view at a later date. See the full-sized image by highlighting a thumbnail (using the Up or  
Down 4-Way Cursor keys), then using the Right 4-Way Cursor key to view the full image. A border around  
the full-size screen snapshot indicates that it is just a screen snapshot, not a “live” view. You can delete  
the selected image, or all images, by selecting a thumbnail and using Delete Image, or using Delete All  
Images from the Screen Snapshot X-Press™ menu.  
Working with screen snapshots is a four-step process:  
1. Enabling Screen Snapshot from the Accessories Menu.  
2. Making a Screen Snapshot using the MARK key.  
3. Viewing a Screen Snapshot using the Screen Snapshot View.  
4. Deleting a Screen Snapshot using the Screen Snapshot X-Press™ menu.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Snapshot View  
4
1
5
6
7
2
8
3
9
1
Highlighted Screen Snapshot Thumbnail  
Screen Snapshot Thumbnail  
Unavailable icon  
Time and Date where Snapshot was captured  
Position where Snapshot was captured  
Amount of space left on the card  
6
7
8
9
2
3
4
5
Information Box  
Total amount of space on card  
Snapshot Name  
For more information, see Accessories Menu Tab: Using Screen Snapshot and Screen Snapshot  
X-Press™ Menu.  
Waypoint Thumbnails: On the Chart View, you can use the INFO key to view Screen Snapshot as Waypoint  
thumbnails. Waypoints thumbnails are created while the Snapshot feature is turned on. They are linked to  
snapshot waypoints. Before these snapshot waypoints are edited for the first time, they are assigned a  
filename that begins with an S and is followed by several numbers, and are represented by the camera icon.  
NOTE: You must have an MMC/SD card installed to store or view waypoint thumbnails. If you press the INFO  
key while the cursor is on a snapshot waypoint and the MMC/SD card is missing, only the normal chart  
information will be displayed.  
When the cursor is active on the Chart View and snaps to one of these snapshot waypoints, a waypoint  
thumbnail will be displayed. Pressing the INFO key while the cursor is near one of these snapshot  
waypoints will make the full snapshot appear on the screen. Pressing the EXIT key will show the cursor on  
the waypoint, with the waypoint thumbnail displayed.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart View showing the Waypoint Thumbnail Feature  
1
4
2
3
10  
5
6
9
7
8
10  
15  
16  
13  
12  
11  
14  
17  
1
Cursor Info Box  
Course: the current direction the boat is traveling  
11  
measured in degrees from North.  
2
3
4
5
6
7
Latitude and Longitude Position of Cursor  
Distance to Cursor  
Bearing to Cursor  
Bearing: Direction to Destination Waypoint  
12  
measured in degrees from North  
XTE (Cross Track Error): Distance of Boat from Route 13  
Route  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
14  
Boat Icon  
Snapshot Waypoint Name  
Waypoint Thumbnail  
Map Scale  
NEXT: Next Waypoint in the Route 15  
TTG: Time to Go to Waypoint 16  
DTG: Distance to Go to Waypoint 17  
8
9
10 Next Waypoint  
When you start a screen snapshot, you will see a message that a waypoint has been created at the point  
where your cursor is on the screen, and the screen will freeze while the snapshot is being saved to the  
MMC/SD card. A status dialog box will appear that shows the progress of the save as a percentage, and  
that displays the numbered file name assigned to the .BMP file that is being created. Snapshot filenames  
begin with the letter "S". For more information, see the Accessories Menu Tab: Using Screen Snapshot  
procedure and Screen Snapshot X-Press™ Menu.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Orientation  
All the chart views allow you to choose the orientation of the chart. When North-Up orientation is selected,  
True North is shown at the top of the display. In other words, objects located to the north of the boat are drawn  
above the boat. When Course-Up orientation is selected, the direction of motion of the boat is shown at the  
top of the display. In other words, objects ahead of the boat are drawn above the boat. In both orientations,  
the view pans automatically, so that the boat is always centered on the display. When the boat is stationary,  
it is drawn as a circle. When the boat is in motion, it takes on a boat shape, pointed in the direction of motion  
(always Up in the Course-Up orientation). See Navigation Menu Tab: Chart Orientation for more information.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Cartography  
In the Chart or Combo Views, there are several cartography-related functions that you can access using  
various keys.  
Panning: Use the 4-WAY Cursor keys to move the chart around on the display in the direction of the key being  
pressed. When you do this, a Bullseye Cursor is drawn at the top of the screen and is linked to the boat by a  
yellow line, even if the boat is off the screen. At the same time, a cursor dialog box is displayed at the top of  
the screen with the distance and bearing from the boat to the cursor position and the latitude/longitude  
coordinates of the cursor. When the cursor is active on the display, you can also use the 4-WAY Cursor Control  
key to move the cursor diagonally.  
Chart View with Cursor Present  
Zooming: Use the Plus (+) key to Zoom In and the Minus (-) key to Zoom Out showing the cartography at  
different scales. The scale is indicated on the left side of the display. If you zoom in beyond the available  
chart data, the display will go into Overzoom mode whereby the last available chart data is amplified to  
reflect the scale selected. If you zoom in so far that no cartography is available, a lat/lon grid will be drawn  
instead.  
NOTE: Your Chart screen will automatically declutter and simplify as you zoom out. When you zoom out, all  
waypoint icons that might otherwise overlap each other will declutter the screen by changing into very small blue  
icons, and individual waypoint names will be hidden (see Chart View). When you're panning, and your cursor  
snaps to a waypoint that is using the declutter icon, that waypoint will display its full-size icon and name  
temporarily (until you move the cursor off of it). In addition, when a waypoint name will write on top of another  
waypoint, the name will be truncated until the cursor snaps to it. Different waypoints will use the declutter  
feature at different zoom levels.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Info: Use the INFO key to get detailed information about the chart. If the cursor is active, you will  
see information about the chart objects located near the cursor. If the cursor is not active, the Chart Info  
menu will appear. You can select the nearest port, the nearest tide station, or the nearest current station  
to see information about any of these objects using the 4-WAY Cursor Control key.  
NOTE: The built-in UniMap™ does not contain any Port, Tide or Current information. This information is only  
available from optional-purchase MMC/SD cards.  
Screen Snapshot Waypoints: Use the INFO and 4-WAY Cursor Control keys to view screen snapshot  
thumbnails. On the Chart View, you can use the INFO key to view Screen Snapshot waypoints. Snapshot  
waypoints are waypoints that are created while the Snapshot feature is turned on. See Screen Snapshot  
View for more information.  
Screen Snapshots: Use the INFO and 4-WAY Cursor Control keys to view thumbnails of your Screen  
Snapshots using snapshot waypoints. Snapshot waypoints are waypoints that are created while the  
Snapshot feature is turned on. See Screen Snapshot View for more information.  
NOTE: You must have an MMC/SD card installed to store or view waypoint thumbnails. If you press the INFO key  
while the cursor is on a snapshot waypoint and the MMC/SD card is missing, only the normal chart information  
will be displayed.  
Nearest Port: The position and services information for the nearest port to your present position will be  
displayed. Press the EXIT key to remove the information box and the Bullseye Cursor will be centered over the  
port position. The Cursor Information Boxes will indicate the distance and bearing to the port from your present  
position. Press the EXIT key again to return to the Chart View.  
Nearest Tide Station: Tide information for the nearest tide station to your present position will be  
displayed. This includes the position of the station and the times of the high and low tides for today’s date.  
A tide graph is also displayed showing the rise and fall of the tides for the 24 hour time period  
encompassing the date. You can change the date to look at tide information before or after the date  
displayed by pressing the LEFT or RIGHT Cursor key respectively. Press the EXIT key to remove the  
information box and the Bullseye Cursor will be centered over the tide station position. The cursor  
information boxes will indicate the distance and bearing to the tide station from your present position.  
Press the EXIT key again to return to the Chart View.  
Nearest Current Station: Current information for the nearest current station to your present position will  
be displayed. This includes the position of the station and the current changes for today. Two graphs are  
also presented that show the time, direction and flow speed of the current changes for the 24 hour time  
period of today’s date. You can change the date to look at current information before or after the date  
displayed by pressing the LEFT or RIGHT Cursor key respectively. Press the EXIT key to remove the  
information box and the Bullseye Cursor will be centered over the current station position. The Cursor  
Information Boxes will indicate the distance and bearing to the current station from your present position.  
Press the EXIT key again to return to the Chart View.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction to Navigation  
Use the 1100 Series™ to establish waypoints at areas of interest and to navigate to those waypoints via a  
saveable route (representing the shortest intended distance between waypoints). You can also view and  
save tracks, which represent the actual path of the boat.  
Waypoints, Routes and Tracks  
Waypoints are stored positions that allow you to mark areas of interest or navigation points. Your 1100  
Series™ can store up to 3000 waypoints.  
Waypoints, Routes and Tracks  
1
14  
13  
15  
12  
11  
10  
9
1
6
2
4
3
5
7
8
DTG: Distance to Go to Waypoint  
Cartography  
1
Next Waypoint  
8
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
9
Track  
10  
11  
12  
13  
14  
15  
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
Off Course Limits  
Boat Icon  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Course Projection Line  
Arrival Alarm Limits  
Map Scale  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
6
7
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Routes link two or more waypoints together to create a path for navigation, and are used in trip planning.  
You can link individual waypoints together by using the GOTO key. A route represents your intended  
navigation and shows the shortest path from each waypoint to the next. As you travel a route, staying on  
the route line is the most efficient way to get to your destination, although you should always look out for  
obstacles not shown on the chart. Your 1100 Series™ can store up to 50 routes that can each contain up  
to 50 waypoints.  
Tracks consist of detailed position history, and are displayed as a breadcrumb trail of trackpoints. The  
Current Track shows the position history since the unit was powered up (maximum of 20,000 trackpoints  
displayed). You can clear the Current Track or save it at any time. Your 1100 Series™ can store up to 50  
saved tracks, each containing 20,000 trackpoints. The current track represents your actual path so far.  
Save, Edit, or Delete a Waypoint  
Save your current position as a waypoint: On any view, press the MARK key to save the current position  
of the boat as a waypoint.  
Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key to designate the  
position you want to save as a waypoint. Then press the MARK key to save the marked position as a waypoint.  
Save a position from the sonar history: Use the Cursor key to point to a feature in the sonar history (also  
called the Sonar Saver feature). Press the MARK key to create a waypoint at the location where that sonar  
reading was taken. The new waypoint will also record the depth at that location.  
NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is automatically  
assigned. You can edit the waypoint information later to give it a different name and select an icon to represent  
it (see Waypoint submenu on the Navigation Main Menu Tab).  
Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main Menu  
System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and press the RIGHT  
Cursor key to display the Waypoints submenu.  
Program a specific position as a waypoint: To create a waypoint that is NOT your current position, from  
the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the Cursor keys to  
program a waypoint name, latitude, longitude, and icon before selecting Save.  
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to display a  
list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor key. Use the 4-  
WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor keys to changes values  
once you are in a field. In the Waypoint Name, Latitude and Longitude fields, use the UP and DOWN  
Cursor keys to change the letter or number. All upper and lower case letters are available, as well as digits  
0-9 and some punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor keys to  
change the icon used to represent the waypoint on the Combo and Chart Views. You can exit these fields  
with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor  
key to save your changes.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys to select a  
sort order:  
• Name shows the waypoints alphabetically  
• Time shows the most recently-created waypoint first  
• Distance shows the closest waypoint first.  
Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cursor key to display  
a list of waypoints. Select the waypoint you want to delete, then press the RIGHT Cursor key. You will be  
asked to confirm deletion before the waypoint is actually deleted.  
Navigate to a Waypoint or Position  
Navigate to the cursor position: From any Chart or Combo view, use the Cursor key to select a position or  
waypoint to which you want to navigate. Press the GOTO key. Navigation will begin immediately.  
Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to which you would like  
to navigate from the waypoint list and press the RIGHT Cursor key to select it.  
NOTE: By repeating the previous instructions, you can add more waypoints to create a longer multi-segment  
route.  
Skipping a waypoint: From the Navigation X-Press™ Menu, select Skip Next Waypoint and press the  
RIGHT Cursor key. If there is not another waypoint to skip to, navigation will be cancelled.  
Cancel navigation: From the Navigation X-Press™ Menu, select Cancel Navigation and press the RIGHT  
Cursor key. Canceling navigation removes the route and any waypoints created using the GOTO key, but  
does not remove any saved routes from memory. You will be prompted to save the current route when you  
cancel navigation.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add a Waypoint Target or Trolling Grid  
Add or Remove a Waypoint Target: From the Waypoints submenu (accessed from the Navigation main  
menu), select Target and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint you  
want to target. A target consisting of concentric circles centered on the selected waypoint will appear on  
all of the navigation views; the target shows various distance ranges from the targeted waypoint. To  
remove the target, choose Remove Target from the Navigation X-Press™ Menu.  
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid to a new  
waypoint, the original waypoint will lose its target or grid.  
Chart View with Target  
14  
13  
12  
15  
11  
10  
9
1
6
2
4
3
5
7
8
DTG: Distance to Go to Waypoint  
Cartography  
1
Next Waypoint  
8
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
9
Track  
10  
11  
12  
13  
14  
15  
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
Waypoint Target  
Boat Icon  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Route  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Waypoint in declutter mode  
Map Scale  
6
7
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add or Remove a Trolling Grid: From the Waypoints submenu (accessed from the Navigation main menu), select  
Grid and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint to which you want to add  
the grid. The trolling grid will appear on all of the navigation views, and can be used as a guide when trolling  
around a waypoint. The grid can be rotated to any desired heading using Grid Rotation from the Navigation Main  
menu. To remove the trolling grid, choose Remove Grid from the Navigation X-Press™ Menu.  
Chart View with Grid  
14  
13  
12  
15  
11  
10  
9
1
6
2
4
3
5
7
8
DTG: Distance to Go to Waypoint  
Cartography  
1
Next Waypoint  
8
Course: the current direction the boat is traveling  
measured in degrees from North.  
2
9
Track  
10  
11  
12  
13  
14  
15  
Bearing: Direction to Destination Waypoint  
measured in degrees from North  
3
Waypoint Trolling Grid  
Boat Icon  
4
5
XTE (Cross Track Error): Distance of Boat from Route  
Route  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Waypoint in declutter mode  
Map Scale  
6
7
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid to a new  
waypoint, the original waypoint will lose its target or grid.  
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the trolling grid is the  
same as the length of the scale bar on the left edge of the display. Zooming in or out will decrease or increase  
the spacing, respectively.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Save, Edit or Delete a Route  
Save the current route: While you are navigating, the current route can be saved. From the Navigation  
X-Press™ Menu, select Save Current Route and press the RIGHT Cursor key. Navigation will continue.  
Display the Routes submenu: From any view, press the MENU key twice to display the Main Menu  
System, then use the RIGHT Cursor key to select the Navigation tab. Select Routes and press the RIGHT  
Cursor key to display the Routes submenu.  
Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key.  
A Route Edit screen will be displayed with an empty route. You can name the route, add waypoints to  
the route from the list of all waypoints, and order the waypoints in the route using the Cursor keys.  
Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor key.  
A Route Edit screen will be displayed. Select the route you wish to edit and press the RIGHT Cursor key.  
Re-name the route or change, delete or re-order the waypoints used in the route.  
Delete a saved route: From the Routes submenu, select Delete and press the RIGHT Cursor key. Select  
the route you wish to delete and press the RIGHT Cursor key. You will be asked to confirm your choice  
by pressing the RIGHT Cursor key again before the route is deleted.  
Travel a saved route: From the Routes submenu, select Travel and press the RIGHT Cursor key. A list of  
saved routes will appear. Select the route you wish to travel and press the RIGHT Cursor key to make  
this route the current route and begin navigation. You may also travel the route in either forward or  
reverse order.  
Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A list of saved routes  
will appear. Select the route for which you want information, and press the RIGHT Cursor key. The list  
of waypoints in the route will be shown, with the distance and bearing from each waypoint to the next,  
as well as the distance and bearing from the current position to the first waypoint in the route.  
Save or Clear a Current Track  
Save the current track: From the Navigation X-Press™ Menu, select Save Current Track and press the  
RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To remove the  
track completely from the display, see Edit, Delete or Hide Saved Tracks.  
NOTE: When you save a track, a name is automatically assigned. The track name consists of a date/time stamp,  
but can be re-named later (see Edit, Delete, or Hide Saved Tracks).  
Clear the current track: From the Navigation X-Press™ Menu, select Clear Current Track and press the  
RIGHT Cursor key. The track will be removed from the display and discarded.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit, Delete or Hide Saved Tracks  
Display the Tracks Submenu: From any view, press the MENU key twice to display the Main Menu  
System, then use the RIGHT Cursor key to select the Navigation tab. Select Tracks and press the RIGHT  
Cursor key to display the Tracks submenu.  
Edit a saved track: From the Tracks submenu, select Edit and press the RIGHT Cursor key to display the  
list of saved tracks. Select the track you want to edit and press the RIGHT Cursor key. When the Edit Track  
dialog box appears, use the Cursor keys to move between fields. In the Track Name field, the UP and  
DOWN Cursor keys change the letter or number. All upper and lower case letters are available, as well as  
digits 0-9 and some punctuation characters. You can exit the Track Name field with the LEFT and RIGHT  
Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.  
Delete a saved track: From the Tracks submenu, select Delete and press the RIGHT Cursor key to display  
the list of saved tracks. Select the track you want to delete and press the RIGHT Cursor key. You will be  
asked to confirm deletion before the track is actually deleted.  
Hide or display a saved track: From the Tracks submenu, select Visibility and press the RIGHT Cursor key  
to display the list of saved tracks. Select the track you want to hide or display and use the Cursor keys to  
select Hidden or Visible. Press the EXIT key to return to the Tracks submenu.  
Man Overboard (MOB) Navigation  
As soon as you know that you have a man overboard, you should activate MOB navigation to maximize  
chances for a successful rescue. MOB navigation allows you create a MOB waypoint to locate the point at  
which your man went overboard, and the relation of the boat to that point. When MOB is activated, a MOB  
waypoint, which is a permanent, sharable waypoint with a large, distinctive icon, is created at the boat's  
current position (regardless of whether the chart cursor is active or not). Any current navigation will be  
cancelled and the current route discarded without user notification, and MOB navigation will begin  
immediately. A line will be drawn from the boat's current position to the MOB waypoint, and the MOB  
waypoint will be targeted. The view is switched to the Chart View automatically when MOB is activated,  
and an additional info box that shows the lat/lon position of the MOB waypoint and the elapsed time since  
MOB was activated is added to the Chart View.  
It is not possible to re-activate MOB or modify the current route without first canceling MOB navigation.  
The Off Course trigger is also disabled and the Off Course Alarm circle is not drawn. Any press of the GOTO  
key, or selection of a GOTO menu item, will cause an error beep and a short message will be displayed to  
the user that will disappear after 2 seconds.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activate MOB navigation: Press and hold the GOTO key for more than 1.5 seconds to activate the Man  
Overboard (MOB) function.  
Cancel MOB navigation: From the Navigation X-Press™ menu, select Cancel MOB and press the RIGHT  
Cursor key. Canceling MOB navigation removes the route and any waypoints created using the GOTO key,  
but does not remove any saved routes from memory.  
MOB Navigation  
1
2
3
4
5
10  
11  
6
8
7
9
12  
Bearing: Direction to Destination Waypoint  
1
Target Surrounding MOB Waypoint  
MOB Waypoint  
7
measured in degrees from North  
2
3
4
5
6
XTE (Cross Track Error): Distance of Boat from Route  
8
9
Boat Icon  
Speed: the measurement of the boat’s progress across  
a given distance; the speed measurement provided by GPS.  
Position where Man Overboard was activated  
Elapsed Time since MOB was activated  
NEXT: Next Waypoint in the Route  
TTG: Time to Go to Waypoint  
10  
11  
Course: the current direction the boat is traveling  
measured in degrees from North.  
DTG: Distance to Go to Waypoint  
12  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Menu System  
The menu system is divided into easy-to-use menu modules. The main components of the menu system  
are:  
Start-Up Options Menu: Press the MENU key during the power up sequence to view the Start-Up Options  
menu. See Start-Up Options Menu.  
X-Press™ Menu: The X-Press™ Menu allows you to access the  
settings that are changed frequently without having to navigate  
through the whole menu system. Press the MENU key once to  
display the X-Press™ Menu. When you select a menu item from  
the X-Press™ Menu, the menu will collapse, leaving only the  
menu choice on the screen. Use the UP or DOWN Cursor keys to  
reactivate the X-Press™ Menu.  
NOTE: The X-Press™ Menu choices will vary depending on which  
view is active when you press the MENU key, as well as whether you  
are in Normal or Advanced User Mode. Either the Navigation or Screen  
Snapshot X-Press™ Menu will appear, depending on the view you are  
in.  
Main Menu Tabs: Less frequently-adjusted menus are grouped  
into the Main Menu System. The Main Menu system is organized  
under main tab menu headings to help you find a specific menu  
item quickly. Main tab headings are: Alarms, Navigation, Chart,  
Setup, Views, and Accessories.  
Navigating Through the Main Menu Tabs: To change an  
individual menu setting, use a combination of the MENU and the  
4-WAY Cursor Control keys, as follows:  
1. Press the MENU key twice to display the Main Menu.  
2. Use the 4-WAY Cursor LEFT or RIGHT key to select a  
specific menu tab.  
3. Use the DOWN or UP 4-WAY Cursor Control key to  
select a specific menu item under that tab.  
4. Use the LEFT or RIGHT keys again to change a menu  
setting.  
X-Press™ Menu  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK TIPS:  
• When your cursor is within a menu tab, press the EXIT key to jump directly to the top of the tab.  
• If you are at the bottom of a menu tab, press the DOWN Cursor key to jump directly to the top of  
the tab.  
• If you're at the left or right of a menu tab, you can also jump to the other side by pressing the LEFT  
or RIGHT cursor keys repeatedly until you have moved past the end of the menu.  
• A down arrow at the bottom of a menu means that you can scroll to additional menu choices using  
the DOWN Cursor key.  
• A right or left arrow on a menu choice means that you can use the RIGHT or LEFT Cursor keys to  
make changes or to see more information.  
• If you press MENU or EXIT to leave the main menu system, and then you return to the main menu  
using the MENU key, you will be at the same main menu tab you were on when you last displayed  
the main menu.  
Total Screen Update: When you change any menu settings that affect the view you are in, the view will  
update immediately (i.e. you don’t have to exit the menu to apply the change to the screen).  
User Mode (Normal or Advanced): The Main Menu choices will vary depending on whether you are in  
Normal or Advanced User Mode. An Advanced Mode is provided for users who desire the highest level of  
control over the 1100 Series™ and Normal Mode for users who desire greater simplicity and fewer menu  
choices. Additional Advanced menu choices will be displayed throughout the menu system when you navigate  
to specific menus while in Advanced Mode. Any changes made while in Advanced Mode will remain in effect  
after you switch back to Normal Mode. See Setup Menu Tab: User Mode for specific instructions on changing  
to the User Mode.  
NOTE: The 1100 Series™ defaults to Advanced User Mode on start-up.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Tab, Normal User Mode  
Setup Tab, Advanced User Mode  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start-Up Options Menu  
Press the MENU key when the Title screen is displayed to access the Start-Up Options menu.  
Start-Up Options Menu  
Use the UP or DOWN 4-WAY Cursor keys to position the cursor, then the RIGHT Cursor key to select one  
of the following choices. If you wait too long, the system will default to whichever menu mode happens  
to be highlighted:  
• Normal  
• Simulator  
• System Status.  
See the following paragraphs for more information about each of these choices.  
Normal Operation  
Use Normal Operation for on the water operation. Turn on your Chartplotter by pressing the  
POWER/LIGHT key. The Title screen is displayed until the Chartplotter begins operation. After the Title  
screen is displayed, a 30 second Navigation Warning screen is shown. Press the MENU key during the time  
that the Title screen is displayed to view the Start-Up Menu in order to choose Simulator mode.  
Press the EXIT key during the Navigation Warning to enter into Normal mode.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Simulator  
Use the Simulator to learn how to use your 1100 Series™ before taking your boat on the water. The Simulator  
is a very powerful tool that simulates on-the-water operation, providing a randomly-updated display. We  
recommend going through this manual while using the Simulator, since all of the menus function and affect  
the display the way they actually do when in Normal operation.  
Simulator  
NOTE: At startup, while still on the Title screen (while the name of your Humminbird® model is still on the screen)  
you must press the MENU key and then select Simulator manually to enter Simulator mode. Manually selecting  
Simulator from the Start-Up Options menu allows you to pre-configure your Chartplotter for on the water  
operation. Any menu changes you make will be saved for later use.  
A Simulation message will appear on the display periodically to remind you that you are using the  
Simulator.  
Exit the Simulator by powering your 1100 Series™ off.  
System Status  
Use System Status to view system connections and to conduct a unit self-test.  
The following screens are displayed in turn when you press the VIEW button when using System Status:  
• Self Test  
• Accessory Test  
• GPS Diagnostic View.  
Exit System Status by powering your 1100 Series™ off.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Self Test  
Self Test displays results from the internal diagnostic self test, including unit serial number, Printed Circuit  
Board (PCB) serial number, software revision, total hours of operation and the input voltage. IP and MAC  
addresses are also displayed.  
Self Test Screen  
Accessory Test  
Accessory Test lists the accessories connected to the system.  
Accessory Test Screen  
NOTE: The speed accessory will be detected only if the paddlewheel has moved since your 1100 Series™ was  
powered up.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GPS Diagnostic View  
GPS Diagnostic View, which is only available when a GPS Receiver is attached to your 1100 Series, shows  
a sky chart and numerical data from the GPS receiver. The sky chart shows the location of each visible GPS  
satellite with its satellite number and a signal strength bar. A dark gray bar indicates that the satellite is  
being used to determine your current position. A light gray bar indicates that the satellite is being  
monitored, but is not yet being used.  
This view also reports the current position, local time and date, and other numeric information. The current  
GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has been augmented using  
information from WAAS, EGNOS, or MSAS. A 3D or Enhanced Fix is required for navigation. HDOP (the  
Horizontal Dilution of Precision) is a GPS system parameter which depends on the current satellite  
configuration. HDOP is used to calculate the Estimated Position Error.  
GPS Diagnostic View  
1
2
3
4
3
4
1
2
Satellite Being Monitored  
Sky Chart  
Current Latitude and Longitude  
Satellite Being Used  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Navigation X-Press™ Menu  
The Navigation X-Press™ Menu provides access to the settings  
most frequently used. Press the MENU key once while in the  
Navigation Views (Chart or Bird's Eye Views) to access the  
Navigation X-Press™ Menu.  
NOTE: Menu choices will vary depending on system settings, such as  
whether you are currently navigating.  
Navigation X-Press™ Menu  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Active Side  
Active Side allows you to select which side of a Combo View will be  
active; key presses will only affect the active side of the screen. When a menu is displayed, the non-active  
side of the screen will be grayed out; at any other time, a green arrow will point to the active side. The Active  
Side menu choice is only available when a Combo View is active.  
To select the Active Side:  
1. Highlight Active Side on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to change which side is active. (Left, Right, Default =  
Right).  
Split Position  
Split Position allows you to adjust what percentage of the screen is  
taken up by the left side of any Combo View; each view may be adjusted independently; you must be in a  
specific view to adjust the screen size for that view. The number setting indicates the percentage taken up  
by the left side of the Combo View; selecting Left sets the left side of the screen to its smallest setting. The  
Split Position menu choice is only available when a Combo View is active.  
To Adjust Split Screen Position  
1. Highlight Split Position on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to change the size of the left side of a split screen. (Left,  
30, 40, 50, 60, 70, Right, Default varies)  
Waypoint [Name]  
(Only with an active cursor on a waypoint)  
Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor.  
To view the Waypoint [Name] Submenu:  
1. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor to  
Waypoint to select a waypoint from a list of saved waypoints.  
2. Highlight Waypoint [Name] on the Navigation X-Press™ menu.  
3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which contains the  
following menu choices:  
Waypoint Submenu  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Waypoint Submenu contains the following menu choices:  
Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used  
to represent the waypoint in the Chart and Combo Views.  
Delete allows you to delete a waypoint from the list of saved waypoints.  
Target allows you to apply a target to a waypoint selected from the list of waypoints.  
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.  
Cursor to Waypoint  
(Chart or Combo view only)  
Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can locate  
it or edit it.  
NOTE: This X-Press™ menu item appears only if you have saved waypoints.  
To move cursor to a saved waypoint:  
1. Highlight Cursor to Waypoint on the Navigation X-Press™ menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.  
3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to move the  
cursor to, then use the RIGHT 4-WAY Cursor Control key to select the destination waypoint.  
Save Current Track  
Save Current Track allows you to save the current track being  
displayed. After the current track is saved, a new current track is started.  
To Save Current Track:  
1. Highlight Save Current Track on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.  
3. The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once  
more. To cancel saving the current track, press the LEFT Cursor key.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clear Current Track  
Clear Current Track allows you to clear the current track being  
displayed and start a new track at the present position.  
To Clear Current Track:  
1. Highlight Clear Current Track on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.  
3. The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key once  
more. To cancel clearing the current track, press the LEFT Cursor key.  
Save Current Route  
(Only when navigating)  
Save Current Route allows you to save the current route being displayed. This menu choice will only  
appear when you are currently navigating a route.  
To Save Current Route:  
1. Highlight Save Current Route on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route.  
3. The Confirm dialog box will appear. To save the current route, press the RIGHT Cursor key once  
more. To cancel saving the current route, press the LEFT Cursor key.  
Skip Next Waypoint  
(Only when navigating)  
Skip Next Waypoint removes the next waypoint from the current route. This menu choice will only appear  
when you are currently navigating a route.  
To Skip Next Waypoint:  
1. Highlight Skip Next Waypoint on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.  
3. The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT Cursor key once  
more. To cancel skipping the next waypoint, press the LEFT Cursor key.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cancel Navigation  
(Only when navigating)  
Cancel Navigation discards the current route and exits Navigation Mode. This menu choice will only appear  
when you are currently navigating a route. This will not delete a previously-saved route.  
To Cancel Navigation:  
1. Highlight Cancel Navigation on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.  
3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key once more.  
To avoid canceling navigation, press the LEFT Cursor key.  
Cancel MOB Navigation  
(only when MOB Navigation is activated)  
Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and exits Man Overboard mode.  
This menu choice will only appear when you are currently navigating in Man Overboard mode.  
To Cancel MOB Navigation:  
1. Highlight Cancel MOB Navigation on the Navigation X-Press™ menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling MOB navigation.  
3. The Confirm dialog box will appear. To cancel MOB navigation, press the RIGHT Cursor key once  
more. To avoid canceling MOB navigation, press the LEFT Cursor key.  
Remove Target  
(Only if a Target is active)  
Remove Target removes the waypoint target from the display. This menu choice will only appear when a  
target has already been applied to a waypoint.  
To Remove a Target:  
1. Highlight Remove Target on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to remove the target.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove Grid  
(Only if a Grid is active)  
Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid  
has already been applied to a waypoint.  
To Remove a Grid:  
1. Highlight Remove Grid on the Navigation X-Press™ Menu.  
2. Use the RIGHT 4-WAY Cursor Control key to remove the grid.  
Waypoint [Name]  
(Most recently-created waypoint)  
Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint.  
NOTE: You must have pressed the MARK key at least once since you last powered up the Fishing System for this  
menu choice to appear.  
To view the Waypoint [Name] Submenu:  
1. Move the cursor to the desired position and press the MARK key once to save a waypoint.  
2. Highlight Waypoint[Name] on the Navigation X-Press™ menu.  
3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.  
Waypoint [Name] Submenu  
The Waypoint Submenu contains the following menu choices:  
Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used  
to represent the waypoint in the Chart and Combo Views.  
Delete allows you to delete a waypoint from the list of saved waypoints.  
Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to  
the end of the current route.  
Target allows you to apply a target to a waypoint selected from the list of waypoints.  
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Readouts  
Select Readouts sets individual digital readouts on all the views that  
can display readouts. This feature allows you to select what information will be displayed in each of a  
variable number of fixed-position readouts arranged at the bottom of the screen on various views, or  
whether a particular readout will be turned off, displaying nothing in that area. Readout positions can  
also display information from supported accessories such as Temp/Speed.  
NOTE: All views except the instrument views share the same set of 5 readouts that can be set one way for  
navigation mode using Select Nav Readouts, and they can be set another way for non-navigation mode using  
Select Readouts. Non-navigation readouts are automatically replaced on the display when navigating.  
However, navigating readouts can have any type of information in them allowing you to see navigation, or  
standard information while navigating.  
5 Selectable Readouts  
(Non-Navigation Only)  
Used by All Non-Instrument Views  
Each readout position can either be empty or contain one of the items from the following table:  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Selectable Readouts, Used by All Non-Instrument Views; Non-Navigation Mode  
COG  
Course Over Ground; Course Over Ground is the current direction the boat is traveling measured in degrees from  
North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). When the Course Over Ground  
is equal to Bearing, the boat is said to be “On Course” and will arrive at the destination in the most efficient  
manner. See the Glossary for more information.  
Off  
Suppresses the readout so that no data shows in that position.  
Position  
SOG  
Position is the current location (latitude, longitude) determined by GPS.  
Speed Over Ground; Speed Over Ground is the measurement of the boat’s progress across a given distance; the  
speed measurement provided by GPS; accurate destination times can be derived from this measurement. See the  
Glossary for more information.  
Temp  
The current detected water temperature from an optional-purchase Temperature Probe or Temp/Speed accessory.  
Aux. Temp  
Time  
The current detected water temperature from an optional-purchase Temperature Probe or Temp/Speed accessory.  
The current time.  
Time + Date  
Triplog  
The current time and date.  
Displays the triplog, which measures the elapsed time since last reset, the distance traveled since last reset, and  
average speed during timed interval.  
Voltage  
Power supplied to the control head.  
Water Speed  
The current speed of the water as it flows past the boat.  
NOTE: You can set a second set of 5 readouts with navigation mode settings as well, so that, when you are  
navigating, these views contain navigation data instead of the regular settings. See Navigation X-Press™  
menu: Select Nav Readouts for more information.  
NOTE: Some readout boxes are limited to display non-navigation information only.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart View with 5 Default Readouts  
Chart View with 5 Custom Readouts  
To Select Readouts:  
1. Highlight Select Readouts on the Navigation X-Press™ menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.  
3. The Select Readouts submenu will appear, showing a list of all readouts. Use the UP or DOWN  
Cursor keys to select a particular readout position, then use the RIGHT or LEFT Cursor keys to  
change what will be displayed at that position.  
NOTE: The selections for each readout will vary, depending on which view you are in and which readout position  
you are setting. See the preceding table to find your view and the selectable readouts that are available for each  
readout position in that view.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Nav Readouts  
Select Nav Readouts sets the individual digital readouts that will be  
used only during navigation on all non-instrument views. This feature allows you to select what  
information will be displayed in each of a variable number of fixed-position readouts arranged at the  
bottom of the screen on various views, or whether a particular readout will be turned off, displaying  
nothing in that area. Readout positions can also display information from supported accessories such as  
Temp/Speed.  
NOTE: All views except the instrument views share the same set of 5 readouts that can be set one way  
for navigation mode using Select Nav Readouts, and another set of 5 readouts that can be set another way  
for non-navigation mode using Select Readouts. Non-navigation readouts are automatically replaced on  
the display when navigating. Navigating readouts can have any type of information in them. You can set  
these 5 readouts with navigation mode settings, so that, when you are navigating, these views contain  
navigation data instead of the regular settings. See Navigation X-Press™ menu: Select Readouts for  
more information about non-navigation settings.  
To Select Nav Readouts:  
1. Highlight Select Nav Readouts on the Navigation X-Press™ menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.  
3. The Select Nav Readouts submenu will appear, showing a list of all readouts to be shown during  
navigation. Use the UP or DOWN Cursor keys to select a particular readout position, then use the  
RIGHT or LEFT Cursor keys to change what will be displayed at that position.  
NOTE: The selections for each readout will vary, depending on which view you are in and which readout position  
you are setting. See the preceding table to find your view and the selectable readouts that are available for each  
readout position in that view.  
Each readout position can either be empty or contain one of the items from the following table:  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Selectable Readouts Used by All Non-Instrument Views; Navigation Mode  
Bearing  
Bearing is the direction to a destination waypoint measured in degrees from North (i.e. 321°, where 000° is  
North, 090° East, 180° is South, 270° is West).  
CMG/SMG  
COG  
Course Made Good/Speed Made Good. Course Made Good is the angle between the starting point on a route and  
the current position of the boat. The goal is to have CMG and Track equal to the same number. See the Course  
Made Good illustration. Speed Made Good is the distance from the starting waypoint on the route divided by the  
time elapsed since starting navigation on the route.  
Course Over Ground. Course Over Ground is the current direction the boat is traveling measured in degrees from  
North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). When the Course Over Ground  
is equal to Bearing, the boat is said to be “On Course” and will arrive at the destination in the most efficient  
manner. See the Glossary for more information.  
Off  
Suppresses the readout so that no data shows in that position.  
Position  
SOG  
Position is the current location (latitude, longitude) determined by GPS.  
Speed Over Ground. Speed Over Ground is the measurement of the boat’s progress across a given distance; the  
speed measurement provided by GPS; accurate destination times can be derived from this measurement. See the  
Glossary for more information.  
TRK/CMG  
TTG  
Track/Course Made Good. The Track Line is the desired line of travel between two waypoints, and represents the most  
efficient path between the two points because it is a straight line. The TRK is measured in degrees. See above for an  
explanation of Course Made Good.  
Time To Go. Time To Go is the estimated time required to reach the destination waypoint. TTG is calculated using  
the SOG and DTG.  
Temp  
The current detected water temperature.  
Aux. Temp  
Time  
The current detected water temperature from an optional-purchase Temperature Probe or Temp/Speed accessory.  
The current time.  
Time + Date  
Triplog  
The current time and date.  
Displays the triplog, which measures the elapsed time since last reset, the distance traveled since last reset, and  
average speed during timed interval.  
VMG  
Velocity Made Good. Velocity Made Good is the speed of travel relative to the next waypoint on the route. The  
goal is for VMG to equal Speed.  
Voltage  
Power supplied to the control head.  
WPTend/ETA/DTG Waypoint End/Estimated Time of Arrival/Distance to Go. Waypoint End is the last waypoint on the route.  
Estimated Time of Arrival is the estimated time of arrival to the last waypoint on the route. Distance To Go is the  
distance between the current position of the boat and the last waypoint on the route.  
WPTend/TTG/DTG Waypoint End/Time To Go/Distance to Go. Waypoint End is the last waypoint on the route. Time To Go is the  
estimated time required to reach the last waypoint on the route. TTG is calculated using the SOG and DTG. Distance  
To Go is the distance between the current position of the boat and the last waypoint on the route.  
Water Speed  
The current speed of the water as it flows past the boat.  
WPTnext/ETA/DTG Waypoint Next/Estimated Time of Arrival/Distance to Go. Waypoint Next is the next waypoint on the route.  
Estimated Time of Arrival is the estimated time of arrival to the next waypoint on the route. Distance To Go is the  
distance between the current position of the boat and the next waypoint on the route.  
WPTnext/TTG/DTG Waypoint Next/Time To Go/Distance to Go. Waypoint Next is the next waypoint on the route. Time To Go is the  
estimated time required to reach the next waypoint on the route. TTG is calculated using the SOG and DTG.  
Distance To Go is the distance between the current position of the boat and the next waypoint on the route.  
Waypoint/TTG  
XTE  
Waypoint/Time To Go. Waypoint/Time To Go for the next waypoint on the route.  
Cross Track Error is the straight-line distance of the boat from the intended Track. XTE measures how far the boat  
is off course, and also triggers the Off Course Alarm.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Instrument Readouts  
Select Instrument Readouts sets individual digital readouts on all of  
the instrument views. This feature allows you to select what information will be displayed in 8 of the 10  
fixed-position readouts arranged at the bottom of the screen on the special instrument views; it also allows  
you to select whether a particular readout will be turned off, displaying nothing in that area.  
Instrument readouts are shown in two rows. The bottom row, which is always on, allows any non-  
navigation readouts to be displayed as described in Select Readouts. The top row, which only appears  
while you are navigating, allows any type of readout to be displayed as described in Select Nav Readouts.  
8 Selectable Readouts  
Used by Chart/Bird's Eye  
Combo Instrument View  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart/Bird's Eye Instrument Views with 8 Default Readouts  
Chart/Bird's Eye Instrument Views with 8 Custom Readouts  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Snapshot X-Press™ Menu  
(Screen Snapshot View only)  
The Screen Snapshot X-Press™ menu provides access to the  
image management functions. Press the MENU key once while in  
the Screen Snapshot View to access the Screen Snapshot X-  
Press™ menu.  
Screen Snapshot  
X-Press™ Menu  
NOTE: For more information, see Screen Snapshot View.  
Delete Image  
(optional-purchase MMC/SD Card only)  
Delete Image allows you to delete a single screen capture image from the Screen Snapshot View. This  
menu option is only available when you have an optional-purchase MMC/SD card installed and you are in  
Screen Snapshot View and you have selected an image thumbnail.  
To delete an image:  
1. On the Screen Snapshot View, use the UP and DOWN 4-Way Cursor keys to select the image you  
want to delete.  
2. Highlight Delete Image on the Screen Snapshot X-Press™ menu.  
3. Press the RIGHT 4-Way Cursor key to initiate this procedure.  
4. A Confirm Dialog box will ask if you want to delete the image. Select Yes to delete the image or  
No to cancel the operation.  
Delete All Images  
(optional-purchase MMC/SD Card only)  
Delete All Images allows you to delete all the images at once from the Screen Snapshot View. This menu  
option is only available when you have an optional-purchase MMC/SD card installed and you are in Screen  
Snapshot View.  
To delete all images:  
1. From the Screen Snapshot View, highlight Delete All Images on the Screen Snapshot X-Press™  
Menu.  
2. A confirmation dialog box will ask if you want to delete all images. Select Yes to delete all images,  
or No to cancel the operation.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Navigation Menu Tab  
Press the MENU key twice to access the Main Menu System,  
then press the RIGHT cursor key to select the Navigation tab.  
NOTE: Menu choices will vary depending on system settings.  
Navigation Menu  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Current Track  
Current Track allows you to view the Current Track submenu.  
To view the Current Track Submenu:  
1. Highlight Current Track on the Navigation main menu.  
2. Use the RIGHT 4-WAY Cursor Control keys to view the Current Track submenu.  
Current Track Submenu  
The Current Track Submenu contains the following menu choices:  
Save Current Track allows you to save the current track.  
Clear Current Track allows you to clear the current track.  
Appearance allows you to change the style and color of the current track. (Breadcrumb Trail, Dashed Line,  
Solid Line or Wide Line), and if a line, the color of the line, or Color By Depth. If you choose Color By Depth,  
you cannot choose one color to represent the track; a color range will represent the different depths on  
the track instead, from light green (shallowest) to black (deepest). You can change the depth range  
associated with black by using Track Color Range menu setting (see Navigation Main Menu: Track Color  
Range).  
NOTE: Imported tracks will display the appearance set before they were imported.  
Saved Tracks  
Saved Tracks allows you to view the Saved Tracks submenu.  
To view the Saved Tracks Submenu:  
1. Highlight Saved Tracks on the Navigation main menu.  
2. Use the RIGHT 4-WAY Cursor Control keys to view the Saved Tracks submenu.  
Saved Tracks Submenu  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Saved Tracks Submenu contains the following menu choices:  
Edit allows you to select a previously-saved track and edit its name, whether it is visible or not, and its  
appearance.  
Delete allows you to delete a track from a list of previously-saved tracks.  
Default sets the appearance of the track created by selecting Save Current Track.  
Waypoints  
Waypoints allows you to view the Waypoints submenu.  
To view the Waypoints Submenu:  
1. Highlight Waypoints on the Navigation main menu.  
2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu.  
Waypoints Submenu  
The Waypoints Submenu contains the following menu choices:  
Create allows you to create a new waypoint and edit it immediately. The current boat position will be used  
as the default, but you can set the coordinates to any valid position. The Icon used to represent the  
waypoint in the Chart and Combo Views can also be changed.  
Edit allows you to choose from a list of previously-saved waypoints, then edit the Name, Position (Latitude  
and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo  
Views.  
Delete allows you to delete a waypoint from the list of saved waypoints.  
Cursor To allows you to move the cursor quickly to a waypoint selected from the list of saved waypoints.  
Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to  
the end of the current route.  
Target allows you to apply a target to a waypoint selected from the list of waypoints.  
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Routes  
Routes allows you to view the Routes submenu.  
To view the Routes Submenu:  
1. Highlight Routes on the Navigation main menu.  
2. Use the RIGHT 4-WAY Cursor Control keys to view the Routes submenu.  
Routes Submenu  
The Routes Submenu contains the following menu choices:  
Create allows you to create a new, empty route and add waypoints to it immediately.  
Edit allows you to select a previously-saved route and edit its name and the waypoints on it.  
Delete allows you to delete a route from a list of previously-saved routes.  
Travel allows you to select a previously-saved route to use as the current route; this menu setting also  
begins navigation on this route. Routes can be traveled in either the forward or reverse direction.  
Info displays information about the route, including the distance and bearing from each waypoint to the  
next.  
Chart Orientation  
Chart Orientation allows you to select whether the views containing  
charts should be drawn North-Up or Course-Up.  
To change the Chart Orientation setting:  
1. Highlight Chart Orientation on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Orientation setting.  
(North-Up, Course-Up, Default = North-Up)  
NOTE: The Chart Orientation setting does not apply to the Bird's Eye View.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
North Reference  
North Reference allows you to have bearings displayed with one of  
two orientations: True North or Magnetic North.  
To change the North Reference setting:  
1. Highlight North Reference on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the North Reference setting. (True,  
Magnetic, Default = True)  
Trolling Grid Rotation  
Trolling Grid Rotation allows you to set the orientation of the trolling  
grid in degrees, where a setting of 0° displays a standard North, South, East, West alignment. See  
Waypoints for information on how to set a Grid.  
To change the Trolling Grid Rotation setting:  
1. Highlight Trolling Grid Rotation on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trolling Grid Rotation setting.  
(0° to 89°, Default = 0°)  
Trackpoint Interval  
Trackpoint Interval allows you to select the time period between  
trackpoints. The current track can only contain up to 20,000 trackpoints, so longer time periods cause the  
track to extend back further in time, but will be less detailed.  
Note: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must be met before a  
trackpoint is added to the current track.  
To change the Trackpoint Interval setting:  
1. Highlight Trackpoint Interval on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trackpoint Interval setting. (1  
second, 5 seconds, 10 seconds, 15 seconds, 30 seconds or 60 seconds, Default = 1 second)  
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will  
allow you to increase the track resolution.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Track Min Distance  
(Advanced)  
Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added to the  
track.  
NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be met before a  
trackpoint is added to the current track.  
To change the Track Minimum Distance setting:  
1. Make sure you are in Advanced User Mode, then highlight Track Min Distance on the Navigation  
main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Min Distance setting. (1 to  
300 feet or 1 to 100 meters [International Units only], Default = 16 ft, 5 m)  
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will  
allow you to increase the track resolution.  
Track Color Range  
Track Color Range allows you to set the depth range that will be  
displayed as black, the deepest depth, when Color By Depth is selected as the style for the current track  
(see Navigation Menu Tab: Current Track).  
To change the Track Color Range:  
1. Highlight Track Color Range on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Color Range setting. (50 to  
3000 feet or 20 to 1000 meters [International Units only], Default = 50 ft, 20 m)  
Map Datum  
(Advanced)  
Map Datum allows you to change the map coordinate system used by the 1100 Series™ to match those  
of a paper map.  
To change the Map Datum setting:  
1. Make sure you are in Advanced User Mode, then highlight Map Datum on the Navigation main  
menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting. (Default =  
WGS 84)  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Course Projection Line  
Course Projection Line allows you to display or hide an arrow  
extending from the bow of the boat that projects your current course, and shows where the boat will go  
if you continue on your present course.  
To change the Course Project Line setting:  
1. Highlight Course Projection Line on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Course Projection Line setting  
(Hidden, Visible, Default = Visible)  
3D View Outline  
3D View Outline allows you to display or hide an outline on the Chart  
side of either Chart or Bird's Eye Combo Views that shows what you're viewing on the Bird's Eye side of  
the view.  
To change the 3D View Outline setting:  
1. Highlight 3D View Outline on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the 3D View Outline setting (Hidden,  
Visible, Default = Visible)  
Export All Nav Data  
Export All Nav Data allows you to export all saved Tracks, Waypoints  
and Routes to an MMC/SD card.  
To Export All Navigation Data:  
1. Make sure that an optional-purchase MMC/SD card is installed in the slot, then highlight Export All  
Nav Data on the Navigation main menu.  
2. Use the RIGHT 4-WAY Cursor Control key to export all navigation data.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete All Nav Data  
(Advanced)  
Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This menu choice should  
be used with caution.  
To Delete All Navigation Data:  
1. Make sure you are in Advanced User Mode, then highlight Delete All Nav Data on the Navigation  
main menu.  
2. Use the RIGHT 4-WAY Cursor Control key to delete all navigation data.  
Continuous Navigation Mode  
Continuous Navigation Mode allows you to continue to navigate and  
fish around a particular waypoint, even if you pass over it multiple times.  
To activate or de-activate Continuous Navigation:  
1. Highlight Continuous Navigation Mode on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Continuous Navigation Mode On or Off  
(Off, On, Default = Off)  
GPS Receiver Override  
(Advanced)  
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS receivers  
plugged in to your system. These multiple GPS receivers may either be internal, external or connected via  
the InterLink. If you select Auto, your unit will select a GPS receiver automatically.  
To activate or de-activate GPS Receiver Override:  
1. Make sure you are in Advanced User Mode, then highlight GPS Receiver Override on the  
Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select which GPS receiver to use. (Default  
= Auto)  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Menu Tab  
Press the MENU key twice to access the Main Menu System and  
then press the RIGHT Cursor key to select the Chart tab.  
NOTE: Menu choices will vary depending on system settings such as  
whether the unit is set for Advanced User mode.  
Chart Menu  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Detail Level  
Chart Detail Level allows you to select how much chart detail you want  
displayed on the Navigation Views. Basic shows land areas, ports, obstructions and restricted areas.  
Navigation shows navaids, landmarks, ferryways and navigation routes in addition to the Basic information.  
Underwater shows depth contours, fishing areas, underwater wrecks, tides and currents in addition to the  
Basic and Navigation information. All shows roads, buildings, railways, and other notations in addition to the  
Basic, Navigation and Underwater information.  
To change the Chart Detail Level setting:  
1. Highlight Chart Detail Level on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail Level setting. (Basic,  
Navigation, Underwater, All; Default = All)  
NOTE: Some chart details are only available with optional-purchase MMC/SD cards.  
Map Borders  
Map Borders allows you to display or hide map borders. A Map Border  
indicates an area which contains a different map.  
Map Borders, shown with optional-purchase Navionics® Cartography  
1
Map Borders  
1
To change the Map Borders setting:  
1. Highlight Map Borders on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders setting. (Hidden,  
MMC/SD Only, All Visible, Default = MMC/SD only)  
Lat/Lon Grid  
Lat/Lon Grid allows you to display or hide a grid showing latitude and  
longitude lines.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the Lat/Lon Grid setting:  
1. Highlight Lat/Lon Grid on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid setting. (Hidden,  
Visible, Default = Hidden)  
Spot Soundings  
Spot Soundings allows you to display or hide spot soundings, which  
are depth measurements shown on the chart.  
NOTE: Spot Soundings are only available with optional-purchase MMC/SD cards.  
To change the Spot Soundings setting:  
1. Highlight Spot Soundings on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings setting. (Hidden,  
Visible, Default = Visible)  
Navaids on Bird's Eye View  
Navaids on Bird's Eye View allows you to display or hide additional  
navigational aids, such as lights and buoys, in Bird's Eye View.  
NOTE: You will see more navigational aids with and optional-purchase MMC/SD card.  
To change the Navaids on Bird's Eye View setting:  
1. Highlight Navaids on Bird's Eye View on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Navaids on Bird's Eye View  
setting. (Hidden, Visible, Default = Visible)  
Shaded Depth  
Shaded Depth allows you to change the depth used for shading on the  
chart views.  
To change the Shaded Depth setting:  
1. Highlight Shaded Depth on the Chart main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Shaded Depth setting. (Off, 1 to  
60 Feet or 1 to 20 Meters [International Units only], Default = 15 ft, 5 m)  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chart Select  
Chart Select allows you to choose what chart to use if you have built-  
in charts or a map card. If you select Auto, your unit will select a chart automatically.  
To activate or de-activate Chart Select:  
1. Highlight Chart Select on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select which chart to use. (Default = Auto)  
NVB Chart Preference  
NVB Chart Preference allows you to choose what built-in chart to use  
if you have an NVB unit. If you select Auto, your NVB unit will select a chart automatically.  
To activate or de-activate NVB Chart Preference:  
1. Highlight NVB Chart Preference on the Navigation main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select which chart to use. (Default = Auto)  
Set Simulation Position  
(Advanced)  
Set Simulation Position allows you to set the position of the boat used in the Simulator.  
To set the Simulation Position:  
1. Activate the cursor and move it to the coordinates from where you want simulation to start.  
NOTE: The cursor must be active in order for this procedure to work.  
2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the Chart  
main menu.  
3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting. A  
confirmation dialog box will appear to allow you to change your mind, or to confirm your choice.  
If the cursor was not active before you began this procedure, you will see an error message. Exit  
the menu, set the cursor, then try again.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Map Offset  
(Advanced)  
Set Map Offset allows you to change the map offset used by the 1100 Series™.  
NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map  
Offset should be cleared if a different map is to be used.  
To change the Map Offset setting:  
1. Activate the cursor and move it location where the Map Offset will be applied.  
NOTE: The cursor must be active in order for this procedure to work.  
2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the Chart main  
menu.  
3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset. A confirmation dialog box will  
appear to allow you to change your mind, or to confirm your choice. If the cursor was not active  
before you began this procedure, you will see an error message. Exit the menu, set the cursor,  
then try again.  
Clear Map Offset  
(Advanced)  
Clear Map Offset allows you to clear the Map Offset. Clear Map Offset is only accessible if a Map Offset  
is currently active.  
To Clear Map Offset:  
1. Make sure you are in Advanced User Mode, then highlight Clear Map Offset on the Chart main  
menu.  
2. Use the RIGHT 4-WAY Cursor Control key to clear the Map Offset.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarms Menu Tab  
From any view, press the MENU key twice to access the Main  
Menu System. The Alarms tab will be the default selection.  
NOTE: When an alarm is triggered, you can silence it by pressing any  
key. The alarm will be silenced, and will not be triggered again until a  
new instance of the alarm condition is detected.  
Alarms Menu  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm Volume  
Alarm Volume allows you to adjust the volume of the alarms.  
To change the Alarm Volume setting:  
1. Highlight Alarm Volume on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Volume setting. (Off, 1 -  
10, Default = 5)  
Low Battery Alarm  
Low Battery Alarm sounds when the input battery voltage is equal to  
or less than the menu setting. The battery alarm will only sound for the battery that is connected to the  
1100 Series™. The Low Battery Alarm should be set to warn you when the battery voltage drops below the  
safety margin that you have determined. For instance, if you are running a trolling motor (battery  
operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low  
for it to be used to start your main, gasoline-powered engine.  
NOTE: Your unit will detect when your battery voltage is too low or too high, and will display either Input Voltage  
Low or Input Voltage High messages if these limits are exceeded. If you turn the Low Battery Alarm on using the  
Alarms Main Menu, your unit will use your settings. If you do not turn the Low Battery Alarm on, the unit will  
use these limits: 7.5 to 7.9 VDC for the low end, and 21 to 21.2 VDC for the high end.  
To change the Low Battery Alarm setting:  
1. Highlight Low Battery Alarm on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off,  
8.5V - 13.5V, Default = Off)  
Temp. Alarm  
Temp. Alarm sounds when the water temperature detected by the  
1100 Series™ reaches the Temp. Alarm setting, which is either set in degrees Fahrenheit or Celsius  
[International models only]. For example, if the Temp. Alarm is set to 58° Fahrenheit, and the water  
temperature falls from 60° to 58°, the Temp. Alarm will sound. Similarly, if the water temperature rises  
from 56° to 58°, the Temp. Alarm will also sound.  
To change the Temp. Alarm setting:  
1. Highlight Temp. Alarm on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp. Alarm setting. (Off, 32-120  
[Fahrenheit], 0-50 [Celsius (International models only)], Default = Off)  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Off Course Alarm  
Off Course Alarm sounds when the boat has moved too far off course  
based on the menu setting when navigating. Off Course Alarm allows you to set how far the boat is  
allowed to move off course before the Off Course Alarm will sound.  
Off Course Alarm  
1
2
Arrival Alarm Circle  
Off Course Limits  
2
1
To change the Off Course Alarm setting:  
1. Highlight Off Course Alarm on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm setting. (Off,  
25 to 3000 feet, 10 to 1000 meters [International models only], Default = 300 ft, 100 m)  
Arrival Alarm  
Arrival Alarm sounds when the boat has either exceeded the distance  
to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu setting when  
navigating. Arrival Alarm allows you to set how close the boat must be to the destination waypoint before  
the Arrival Alarm will sound.  
To change the Arrival Alarm setting:  
1. Highlight Arrival Alarm on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting. (Off, 25 to  
3000 feet, 10 to 1000 meters [International models only], Default = 150 ft, 50 m)  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drift Alarm  
Drift Alarm sounds when the boat has exceeded the distance from the  
boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a perimeter  
around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm  
will sound.  
Drift Alarm  
1
Drift Alarm Circle  
1
To change the Drift Alarm setting:  
1. Highlight Drift Alarm on the Alarms main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting. (Off, 25 to  
3000 feet, 10 to 1000 meters [International models only], Default = Off)  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Tab  
From any view, press the MENU key twice to access the tabbed  
Main Menu System, then press the RIGHT cursor key until the  
Setup tab is selected.  
NOTE: Menu choices will vary depending on system settings such as  
whether the unit is set for Advanced User mode and what accessories  
are attached to the control head.  
Setup Menu  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Volume  
Sound Volume allows you to control the volume of all sounds emitted  
by the control head (except for the volume of the alarms, which is controlled by Alarm Volume).  
To change the Sound Volume setting:  
1. Highlight Sound Volume on the Setup main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sound Volume setting.  
(Mute, 1 - 10, Default = 5)  
Units - Depth  
Units - Depth selects the units of measure for all depth-related  
readouts.  
To change the Units - Depth setting:  
1. Highlight Units - Depth on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting. (Meters  
[International models only], Feet, Fathoms; Default is Meters for International models, and Feet  
for Domestic models)  
Units - Temp  
(International only)  
Units - Temp selects the units of measure for all temperature-related readouts. International models  
only.  
To change the Units - Temp setting:  
1. Highlight Units - Temp on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting. (Celsius,  
Fahrenheit; Default = Celsius)  
Units - Distance  
(with Speed input only)  
Units - Distance selects the units of measure for all distance-related readouts.  
To change the Units - Distance setting:  
1. Highlight Units - Distance on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting.  
(Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International Models:  
Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles; Default =  
Meters/Kilometers)  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Units - Speed  
(with Speed input only)  
Units - Speed selects the units of measure for speed-related readouts.  
To change the Units - Speed setting:  
1. Highlight Units - Speed on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.  
(kph [International models only], mph, kts, Default = kph for International models and mph for  
Domestic models)  
User Mode  
User Mode sets the menu system to either Normal or Advanced. When  
set to Normal, only the basic menu options are shown. When set to Advanced (default setting), additional  
menu choices are available.  
To change the User Mode setting:  
1. Highlight User Mode on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting. (Normal,  
Advanced, Default = Advanced)  
Language  
(International only)  
Language selects the display language for menus. International models only.  
To change the Language setting:  
1. Highlight Language on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting. (Default =  
English)  
Triplog Reset  
(with Speed input only)  
Triplog Reset resets the Triplog to zero. The Triplog provides the following information: timer for elapsed time,  
distance traveled since last reset, and average speed.  
To Reset Triplog:  
1. Highlight Reset Triplog on the Setup menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.  
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once more.  
To cancel Reset Triplog, press the LEFT Cursor key.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restore Defaults  
Restore Defaults resets ALL menu settings to their factory defaults.  
Use this menu choice with caution!  
To Restore Defaults:  
1. Highlight Restore Defaults on the Setup menu.  
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.  
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key once  
more. To cancel Restore Defaults, press the LEFT Cursor key.  
Temp. Offset  
(Advanced)  
Temp. Offset will adjust the temperature readout by the amount entered. This menu choice is available  
only when in Advanced User Mode (see Setup Menu Tab: User Mode.)  
To change the Temp. Offset setting:  
1. Make sure you are in Advanced User Mode, then highlight Temp. Offset on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp. Offset setting. (-10.0 to  
+10.0 degrees, Default = 0.0, or Off)  
Speed Calibration  
(Advanced, with Speed paddlewheel only)  
Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the menu  
if a Speed accessory is connected and the paddlewheel has moved at least once, when the unit is in  
Advanced User Mode (see Setup Menu Tab: User Mode.)  
To change the Speed Calibration setting:  
1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed Calibration setting. (-20%  
to +20%, Default = 0%)  
Local Time Zone  
(Advanced)  
Local Time Zone selects your time zone in reference to the time reported by the GPS receiver when  
Time+Date is selected as a Digital Readout (see Navigation X-Press™: Select Readouts). This menu  
choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)  
To change the Local Time Zone:  
1. Make sure you are in Advanced User Mode, then highlight Local Time Zone on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone (Default = EST  
[UTC-5] - Eastern Standard Time).  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daylight Saving Time  
(Advanced)  
Daylight Saving Time adjusts the time display to account for local Daylight Saving Time. Selecting On adds  
one hour to the time display adjusted for your local time zone. Selecting Off leaves the time display as  
adjusted for your local time zone. This menu choice is available only when in Advanced User Mode (see Setup  
Menu Tab: User Mode.)  
To change the Daylight Saving Time setting:  
1. Make sure you are in Advanced User Mode, then highlight Daylight Saving Time on the Setup  
menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time On or Off. (Off,  
On, Default = Off)  
Position Format  
(Advanced)  
Position Format selects the format of the latitude and longitude position display. This menu choice is  
available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)  
To change the Position Format setting:  
1. Make sure you are in Advanced User Mode, then highlight Position Format on the  
Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format. (dd.ddddd°,  
dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')  
Time Format  
(Advanced, International only)  
Time Format changes the time format used by the unit This menu choice is available only when in  
Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Time Format  
selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital  
Readout (see Navigation X-Press™: Select Readouts).  
To change the Time Format:  
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour, 24 hour,  
Default = 12 hour)  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Date Format  
(Advanced, International only)  
Date Format changes the date format used by the unit This menu choice is available only when in  
Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Date Format selects  
the format for the date display when Time + Date is selected as a Digital Readout (see Navigation X-  
Press™: Select Readouts).  
To change the Date Format:  
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format. (mm/dd/yy,  
dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)  
Digits Format  
(Advanced)  
Digits Format allows you to add a tenth decimal place to readouts such as Temperature and Depth. The  
format can be changed to small format, large format or no format. This menu choice is available only when  
in Advanced User Mode (see Setup Menu Tab: User Mode.)  
To change the Digits Format setting:  
1. Make sure you are in Advanced User Mode, then highlight Digits Format on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Digits Format setting. (Small  
tenths, Large tenths, No tenths, Default = Large tenths)  
NOTE: If you choose No Tenths, the display will only show numbers rounded to whole numbers.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NMEA Output  
(Advanced)  
NMEA Output turns the NMEA output on or off. This menu choice is available only when in Advanced User  
Mode (see Setup Menu Tab: User Mode.)  
The following NMEA sentences are output:  
DPT - Depth  
MTW - Water Temperature  
GLL - Lat/Lon Position  
GGA - GPS Fix Data  
RMC - Recommended Minimum Specific GNSS Data  
VTG - Course Over Ground and Ground Speed  
ZDA - Time and Date  
When navigating, the following NMEA sentences are also output:  
APB - Autopilot Sentence B  
BWR - Bearing and Distance to Waypoint  
RMB - Recommended Minimum Navigation Info  
To turn NMEA Output on or off:  
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or Off (Off,  
On, Default = Off).  
Demonstration  
Demonstration deactivates the Demonstration Mode feature (see  
Powering Up the Unit).  
To turn Demonstration on or off:  
1. Highlight Demonstration on the Setup menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Demonstration On or Off (Off, On,  
Default = On).  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IP Address Setup  
IP Address Setup allows you to set up an Ethernet connection. Use  
this feature to open a window where a dynamic IP address can be selected (your control head will find  
and update its own address) or a static IP address (where you set the address manually).  
To use the IP Address Setup feature:  
1. Highlight IP Address Setup on the Setup main menu.  
2. Use the RIGHT 4-WAY Cursor Control key to display the IP Address Setup window.  
Video Out  
(Advanced)  
Video Out allows you to set the video format that will be sent to your remote monitor.  
To use the Video Out feature:  
1. Highlight Video Out on the Setup main menu.  
2. Use the RIGHT 4-WAY Cursor Control key to select the video format. (Domestic Models: NTSC;  
International Models: NTSC, PAL, PAL M, Default = Off)  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Views Menu Tab  
From any view, press the MENU key twice to access the tabbed  
Main Menu System, then press the RIGHT 4-WAY Cursor Control  
key until the Views tab is selected. This menu tab allows you to  
set the available views to either hidden or visible in the view  
rotation. The view will be removed from the view rotation if it is  
set to Hidden and will be displayed in the view rotation if it is set  
to Visible.  
The following views are available:  
• Bird's Eye No Readouts View  
• Bird's Eye View  
• Chart/Bird's Eye Combo View  
• Chart/Chart Combo View  
• Chart No Readouts View  
• Chart View  
• Chart Instrument View  
• Chart/Bird's Eye Instrument View  
• Screen Snapshot View  
• Self Test View  
Views Menu  
• Accessory Test View  
• GPS Diagnostic View.  
To Change the View Status of Any View:  
1. Highlight the View main menu tab.  
2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.  
3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view from Hidden  
to Visible or vice versa.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories Menu Tab  
From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT  
cursor key until the Accessories tab is selected.  
If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the  
Accessories tab, only the Screen Snapshot menu choice. If an accessory is attached, however, additional  
menu choices that support the accessory will be added automatically. See the Operations Manual that  
comes with your accessory for detailed information.  
Accessories Menu  
Accessories Menu  
(no accessories attached)  
(with accessories attached)  
NOTE: Accessories to enable WeatherSense® require separate purchases. You can visit our website at  
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468 for additional details.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Screen Snapshot  
Screen Snapshot activates the screen snapshot function. When  
Screen Snapshot is enabled, pressing the MARK key creates a saved screen capture on the optional-  
purchase MMC/SD card installed in your unit’s card slot. All menus, dialog boxes, warnings and messages  
are captured and saved automatically.  
Once you have created a screen capture, a screen capture thumbnail is added to the Screen Snapshot  
View, and is available to view at a later date. See the full-sized image by highlighting a thumbnail (using  
the Up or Down 4-Way Cursor keys), then using the Right 4-Way Cursor key to view the full image. A border  
around the full-size screen snapshot indicates that it is just a screen snapshot, not a “live” view. You can  
delete the highlighted image, or all images, by selecting a thumbnail and using Delete Image, or using  
Delete All Images from the Screen Snapshot X-Press™ menu. You can view these captures on the Chart  
and the Screen Snapshot views, which shows any existing thumbnails of the screen captures.  
NOTE: You must have an optional-purchase MMC/SD card installed for the Screen Snapshot feature to work.  
NOTE: If you use your MMC/SD card in two different control heads that have different screen sizes, the  
Screen Snapshot made on one unit will still be present on the card, but will be represented by the Unavailable  
icon (circle with a slanted line through it) on the Screen Snapshot View on the other unit.  
To turn Screen Snapshot on or off:  
1. Highlight Screen Snapshot on the Accessories main menu.  
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Screen Snapshot On or Off (Off, On,  
Default = Off).  
To make a screen snapshot (Screen Snapshot must be enabled):  
1. Make sure you have installed an optional-purchase MMC/SD card into your card slot.  
2. From any view you want to capture, press the MARK key. When you start a screen capture, you  
will see a message that a waypoint has been created at the point where your cursor is on the  
screen, and the screen will freeze while the snapshot is being saved to the MMC/SD card. A  
status dialog box will appear that shows the progress of the save as a percentage, and that  
displays the numbered file name assigned to the .BMP file that is being created.  
NOTE: For more information, see Screen Snapshot View and Screen Snapshot X-Press™ Menu.  
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled but there  
is no GPS receiver connected, pressing the MARK key will capture the screen image and display an error saying  
that a GPS position fix is required to create a waypoint.  
NOTE: The speed of the capture depends on the type of card you use; in general, SD cards capture the screen  
faster than MMC cards do.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view screen snapshots:  
1. Make sure that the optional-purchase MMC/SD card used to capture the screen is installed in  
your card slot.  
2. Press the VIEW key until you see the Screen Snapshot View.  
3. You can scroll through the whole list of captures in this view using the 4-WAY Cursor keys.  
Highlight a thumbnail (using the Up or Down 4-Way Cursor keys), then use the Right 4-Way  
Cursor key to view the full image. A border around the full-size screen capture indicates that it is  
just a screen capture, not a “live” view. You can delete the highlighted image, or all captured  
images, using the Snapshot X-Press™ menu. (See Screen Snapshot X-Press™ menu: Delete  
Image and Delete All Images for more information).  
NOTE: When you highlight a snapshot thumbnail, the amount of room remaining on the SD card will be  
displayed.  
To view a screen snapshot using snapshot waypoints:  
1. Make sure that the optional-purchase MMC/SD card used to capture the snapshot waypoints is  
installed in your card slot.  
2. Press the VIEW key until you see the Chart View.  
3. Move the cursor until you are over a snapshot waypoint. A thumbnail will be displayed within a  
frame, and a line that points from the center of the cursor icon to the center of the thumbnail.  
Press the INFO key to view that screen snapshot.  
4. Pressing the EXIT key will show the cursor on the waypoint, with the snapshot thumbnail  
displayed again.  
NOTE: The waypoints that are created by a snapshot have the same name as the file and use a custom waypoint  
icon. Screen Snapshot filenames begin with the letter "S".  
NOTE: You may view data files associated with each screen snapshot by removing the MMC/SD card from your  
unit and installing it in your optional-purchase MMC/SD card reader connected to a PC. Use Windows Explorer  
to see the contents of your MMC/SD card; you will notice that a .DAT (may show up as .TXT) file is created for  
every .BMP screen capture; this data file includes the thumbnail view, and is required in order to be able to view  
the screen snapshot from your unit, so don’t delete these files.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before contacting the Humminbird® Customer Resource Center, please read the following section. Taking  
the time to review these troubleshooting guidelines may allow you to solve a performance problem  
yourself, and therefore avoid sending your unit back for repair.  
Chartplotter Doesn’t Power Up  
If your Chartplotter doesn’t power up, use the Installation section in this manual for specific confirmation  
details, making sure that:  
• The power cable is properly connected to the Chartplotter control head.  
• The power cable is wired correctly, with red to positive battery terminal and black to negative  
terminal or ground.  
• The fuse is operational.  
• The battery voltage of the power connector is at least 10 Volts.  
Correct any known problems, including removing corrosion from the battery terminals or wiring, or actually  
replacing the battery if necessary.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Problems  
There are several main conditions or sources of possible interference that may cause problems with the  
quality of the information displayed on the control head. Look in the following table for some symptoms of  
display problems and possible solutions:  
Problem  
Possible Cause  
The control head loses  
power at high speeds.  
If the power output of your boat’s engine is unregulated, the  
control head may be protecting itself using its over-voltage  
protection feature. Make sure the input voltage does not  
exceed 20 Volts.  
Finding the Cause of Noise  
Electrical noise usually affects the display with many black dots at high speeds, and high sensitivity  
readings. One or more of the following sources can cause noise or interference:  
Possible Source of Noise  
Isolation  
Other electronic devices  
Turn off any nearby electronic devices to see if the  
problem goes away, then turn them on one at a time to  
see if the noise re-appears.  
To determine whether the boat’s engine is the source of  
the noise, increase the RPMs while the boat is in neutral  
and stationary to see if the noise increases  
proportionately; if noise appears when you rev the  
engine, the problem could be the spark plugs, alternator,  
or tachometer wiring. Replace the spark plugs with  
resistor plugs, install an alternator filter, or route the  
control head power cable away from the engine wiring.  
The boat’s engine  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-Year Limited Warranty  
We warrant the original retail purchaser that products made by Humminbird® have been manufactured  
free from defects in materials and workmanship. This warranty is effective for one year from the date of  
original retail purchase. Humminbird® products found to be defective and covered by this warranty will be  
replaced or repaired free of charge at Humminbird’s option and returned to the customer freight prepaid.  
Humminbird’s sole responsibility under this warranty is limited to the repair or replacement of a product  
that has been deemed defective by Humminbird®. Humminbird® is not responsible for charges connected  
with the removal of such product or reinstallation of replaced or repaired parts.  
This warranty does not apply to a product that has been:  
• Improperly installed;  
• Used in an installation other than that recommended in the product installation and operation  
instructions;  
• Damaged or has failed because of an accident or abnormal operation;  
• Repaired or modified by entities other than Humminbird®.  
Please retain your original receipt as a proof of the purchase date. This will be required for in-warranty  
service.  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, OBLIGATIONS OR LIABILITIES ON  
THE PART OF HUMMINBIRD® AND WILL BE THE CUSTOMER'S EXCLUSIVE REMEDY, EXCEPT FOR ANY  
APPLICABLE IMPLIED WARRANTIES UNDER STATE LAW WHICH ARE HEREBY LIMITED IN DURATION TO  
ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL HUMMINBIRD® BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY RELATING TO THE PRODUCTS.  
Some states do not allow limitations on an implied warranty, or the exclusion of incidental or consequential  
damages, so the above exclusions may not apply to you. You may also have other rights, which vary from  
state to state.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Humminbird® Service Policy  
Even though you'll probably never need to take advantage of our incredible service policy, it's good to know  
that we back our products this confidently. We do it because you deserve the best. We will make every  
effort to repair your unit within three business days from the receipt of your unit at our factory. This does  
not include shipping time to and from our factory. Units received on Friday are typically shipped by the  
following Wednesday, units received Monday are typically shipped by Thursday, etc.  
All repair work is performed by factory-trained technicians to meet exacting factory specifications. Factory-  
serviced units go through the same rigorous testing and quality control inspections as new production  
units.  
After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical  
damage and missing parts are not included).  
Any repairs made after the original warranty will be warranted for an additional 90 days after service has  
been performed by our factory technicians. You can contact our Customer Resource Center or visit our  
website to verify the flat rate repair fee for your product (visit the Product Support section):  
http://www.humminbird.com  
We reserve the right to deem any product unserviceable when replacement parts are no longer available  
or impossible to obtain. This Service Policy is valid in the United States only. This applies only to  
Humminbird® products returned to our factory in Eufaula, Alabama. This Service Policy is subject to  
change without notice.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Returning Your Unit for Service  
Before sending your unit in for repair, please contact the factory, either by phone or by email, to obtain a  
Repair Authorization Number for your unit. Please have your product model name and serial number  
available before calling the factory. If you contact the factory by e-mail, please include your product model  
name and serial number in the e-mail, and use Request for Repair Authorization Number for your e-mail  
subject header. You should include your Repair Authorization Number in all subsequent communications  
about your unit.  
For IN-WARRANTY service, complete the following steps:  
• Obtain a Repair Authorization Number from the Humminbird® Customer Resource Center.  
• Tag product with your name, street address, phone number and your assigned Repair  
Authorization Number.  
• Include a brief written description of the problem.  
• Include a copy of your receipt (to show proof and date of purchase).  
• Return product freight prepaid to Humminbird®, using an insured carrier with delivery  
confirmation.  
For OUT-OF-WARRANTY service, complete the following steps:  
• Obtain a Repair Authorization Number from the Humminbird® Customer Resource Center.  
• Include payment in the form of credit card number and expiration date, money order or personal  
check. Please do not send cash.  
• Tag product with your name, street address, phone number and your assigned Repair  
Authorization Number.  
• Include a brief written description of the problem.  
• Return product freight prepaid to Humminbird®, using an insured carrier with delivery  
confirmation.  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1100 Series™ Chartplotter Accessories  
Accessories customize the 1100 Series™ to your needs and enable you to stay on the edge of new  
technology. When an accessory is connected to the 1100 Series™, additional menus and readouts are  
added automatically to the Main Menu System. Accessories available today that are supported by your  
1100 Series™ include:  
WeatherSense® Fishing Condition Monitor: purchase and plug in the WeatherSense® accessory to your  
1100 Series™ to obtain barometric pressure readouts and trend data in real time.  
GPS Connection Cable: purchase the GPS Connection Cable in order to connect a handheld or other  
NMEA* GPS-compatible device that you may already own to your 1100 Series™.  
*NMEA 0183 is a National Marine Electronics Association standard for data communication.  
Downriggers are the key to catching fish you otherwise couldn’t even touch. And now Humminbird’s  
CannonLink™ Downrigger Controller makes operation of up to six Cannon™ Mag 20 DT or Mag 20 DT/HS  
downriggers incredibly easy. Using the controls on your Fishing System, deploy or retrieve downriggers,  
hold a specific distance off the bottom, cycle downriggers between two depths, and adjust the Positive Ion  
Control. Even see temperature and water clarity at depth and speed at the ball right on-screen when using  
the Cannon™ Speed-n-Temp. You’ll never be shorthanded again, just make adjustments from the helm,  
while your mate rigs the lines and brings in the fish!  
With the new InterLink™ Network Connection, you can now share GPS position, waypoints, routes and  
your current track between two Humminbird® Fishing Systems in real time. Mark a waypoint at the  
console, and it’s instantly available on the second unit. No matter where you’re at on the boat, you’ll have  
access to your critical fishing and navigation information. Plus, daisy chain InterLink™ with other System  
Modules and you’ll have a network that lets you share digital data around the boat. It’s a simply, clearly,  
better networking solution!  
Be sure to check out our website www.humminbird.com for additional new and exciting accessories to  
grow your 1100 Series™.  
NOTE: Each accessory requires a separate purchase. You can visit our website at www.humminbird.com  
or contact our Customer Resource Center at 1-800-633-1468 for additional details.  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 V x 800 H; 10.4” Diagonal 4:3 Color TFT  
Unit Size (Gimbal Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.1”W x 9.3”H x 2.9”D  
Unit Size (In-Dash Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.1”W x 8.8”H x 2.9”D  
Video Output . . . . . . . . . . . . .Domestic Models: NTSC; International Models: NTSC, PAL, PAL M  
GPS Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-Channel GPS with WAAS//EGNOS  
Waypoints/Routes/Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . .3000 Waypoints, 50 Routes, 50 Tracks  
with 20,000 Points Each  
Cartography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Meter Resolution UniMap™ Built-in;  
Optional Navionics® Gold, HotMaps™, HotMaps™ Premium, or Platinum on SD Cards  
Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NMEA 0183 Input/Output;  
Humminbird® Fishing System Optional Accessories . . . . . . . . . . . . . . . .InterLink™, CannonLink™,  
SystemLink, WeatherSense®, HumminbirdPC™  
Power Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 VDC  
NOTE: Product specifications and features are subject to change without notice.  
POLICY ON ENVIRONMENTAL COMPLIANCE: It is the intention of Humminbird® to be a good corporate  
citizen and comply and meet all known and applicable environmental regulations in the areas and countries  
where our products are sold. We will promote and implement environmentally sound processes in support of  
national and international regulations.  
ROHS STATEMENT: Product designed and intended as a fixed installation or part of a system in a vessel may  
be considered beyond the scope of Directive 2002/95/EC of the European Parliament and of the Council of 27  
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.  
WEEE STATEMENT: Product designed and intended as a fixed installation or part of a system in a vessel may  
be considered beyond the scope of Directive 2002/96/EC of the European Parliament and of the Council of 27  
January 2003 on waste electrical and electronic equipment (WEEE).  
CALIFORNIA PROPOSITION 65 STATEMENT: Lead in cable jackets and boots is restricted to 300 parts per  
million or less as determined by ICP-AES test methods.  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Acquisition Time: The length of time that a GPS receiver typically takes to determine a position from at  
least three satellites. Humminbird® GPS receivers provide very fast acquisition times (under one minute),  
permitting users to get out on the water faster.  
Alarm, Arrival: The audible alert that sounds when the boat is equal to or less than the alarm setting (25  
feet – 3000 feet) from the location of the destination waypoint.  
Alarm, Drift: Drift Alarm is an audible alert that sounds when the boat is equal to or over the alarm setting  
(25 feet – 3000 feet) from the location where the alarm was turned on.  
Alarm, Off-Course: Off-Course Alarm is an audible alert that sounds when the boat’s distance from the  
intended Track, (Cross Track Error), is equal to or over the alarm setting (25 feet – 3000 feet). See Track  
and Cross Track Error.  
Altitude: Altitude measures height above sea level. Altitude is a measurement that can be provided by  
GPS.  
Bearing (BRG): Bearing is the direction to a destination waypoint measured in degrees from North (i.e.  
321°, where 000° is North, 090° East, 180° is South, 270° is West).  
Chartplotter: Chartplotter describes a navigation device that shows Present Position on a Map, along with  
Tracks, Waypoints, and Routes. All Chartplotters are also considered Trackplotters. All Humminbird® GPS  
Combo units are Chartplotters. See Trackplotter.  
Cold Start: Cold Start refers to the procedure that a GPS receiver must perform when it does not have  
historical information regarding its current location. This procedure typically lasts for several minutes, and  
may be experienced upon first power up of the receiver, or if the receiver has been moved a great distance.  
Course Over Ground (COG): Course Over Ground is the current direction the boat is traveling measured in  
degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). When the  
Course Over Ground is equal to Bearing, the boat is said to be “On Course” and will arrive at the  
destination in the most efficient manner. COG is often confused with Heading. See Heading.  
Cross Track Error (XTE): Cross Track Error is the straight-line distance of the boat from the intended Track.  
XTE measures how far the boat is off course, and also triggers the Off Course Alarm. See Track.  
Differential GPS (DGPS): Differential GPS is a system to improve the position accuracy of the Department  
of Defense GPS through the use of secondary “correction signals” broadcast from ground stations around  
the coastal United States and on some inland waterways. These correction signals are provided by the  
USCG and received by an auxiliary Differential Beacon Receiver (DBR) that connects to the GPS receiver.  
The advent of WAAS has largely negated the need for the added expense of a DBR in the United States.  
Distance To Go: Distance To Go is the straight-line distance between Present Position and the Destination  
Waypoint. DTG and SOG (Speed Over Ground) are used to calculate Time To Go. See Time to Go and Speed  
Over Ground.  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Estimated Position Error (EPE): Estimated Position Error is a calculation that indicates the potential  
position inaccuracy the user may experience due to a variety of GPS factors which include satellite position  
in the sky, signal strength and others factors.  
Fix Type: Fix Type indicates whether the GPS receiver is providing 2D fix or 3D fix. A 2D fix requires only  
three satellites and provides only latitude and longitude. A 3D fix requires four or more satellites, and  
provides latitude, longitude and altitude.  
GPS: GPS is an acronym for Global Positioning System. GPS provides accurate position (latitude, longitude,  
altitude) information virtually anywhere on the earth through satellite technology and personal receivers  
on the ground. A series of geosynchronous satellites broadcast a unique signal toward the earth once per  
second. A GPS receiver, such as that included with many Humminbird® products, receives the signals from  
these satellites and is able to determine position based on very slight differences in the time each signal  
is received and the receiver’s knowledge of the location of each of the satellites.  
Heading: Heading describes the direction the boat is pointing and is measured in degrees (i.e. 321°, where  
000° is North, 090° East, 180° is South, 270° is West). Due to wind and waves, the boat is often traveling  
in a slightly different direction than it is heading, and therefore Heading is often confused with Course  
Over Ground. See Course Over Ground.  
Map Datum: A Map Datum refers to a particular survey of the earth’s surface that was referenced when  
creating a chart (i.e. WGS84). Since the earth is not flat, and not even consistently round, a mathematical  
model must be used to translate coordinates from the sphere of the earth to the flat surface of a chart.  
This mathematical model is the Map Datum. Historically, many different Map Datums have been used  
around the world to create maps; often a reference to the Map Datum can be found in the legend of a  
paper map. It is important to select the correct Map Datum setting in your fishfinder when comparing GPS  
position to a paper chart to avoid slight position inaccuracies. Almost all electronic charts use the WGS84  
Map Datum and therefore, they do not require setting changes.  
MMC: MMC is an acronym for Multi Media Card. An MMC is a postage stamp-sized memory device used  
to store electronic data such a maps, waypoints, routes and other information. MMC is a very rugged  
format suitable for the marine environment, but it is not waterproof. The MMC is removable from  
Humminbird® products, and can be used in a PC that is equipped with an appropriate card reader. MMC  
is the same format that many digital cameras use. See SD.  
North, Magnetic: North is the principle reference point of the compass (i.e. North is 000°). Magnetic  
North relies on the earth’s magnetic field to align a metal pointer generally towards True North. However,  
due to local variations in the earth’s magnetic field around the globe, the difference between True North  
and Magnetic North can be greater than 10°. See True North.  
North, True: North is the principle reference point of the compass (i.e. North is 000°). True North uses the  
axis of the rotation of the earth as the reference for North and is constant for all points on the earth. Most  
GPS units default to True North as the setting. The GPS heading may vary from the boat compass heading  
because the compass uses Magnetic North. Humminbird® GPS units provide the option of selecting True  
or Magnetic readouts by using the North Reference menu. See Magnetic North.  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Present Position: Present Position is the current location (latitude, longitude) determined by GPS. The  
Present Position is indicated on-screen by a directional boat icon if the boat is moving, or a round symbol  
if the boat is stationary.  
Route: A Route is series of waypoints linked together in a specific sequence to define a navigation path  
between two points, and saved in the fishfinder’s memory. Routes are often used when frequently  
traveling between two or more locations because it is a faster and more accurate method than repeatedly  
selecting individual waypoints each time one travels through the same area. Routes consist of a Start  
Waypoint, an End Waypoint, and a series of waypoints in between. Users can begin navigation at the  
beginning, the end (to run the route in reverse) or at any waypoint in between. See Waypoint.  
SD: SD is an acronym for Secure Digital. An SD card is virtually identical in function to an MMC; however,  
the speed at which information can be accessed is generally faster, the storage capacity is generally  
larger, and the card has security features which can be used to prevent extracting the data from the card.  
SD is the same format that many digital cameras use. See MMC.  
Selective Availability: Selective Availability (SA) is a GPS system “feature” that can be implemented by  
the U.S. Department of Defense (DoD) to degrade the accuracy of GPS positioning information. With SA  
active, the GPS is accurate to within 100 meters 95% of the time. With SA inactive, the GPS is accurate to  
within 45 meters 95% of the time. Currently, SA is inactive and the consumer can enjoy the greater  
precision GPS provides; however, the DoD reserves the right to activate SA at any time.  
Speed Over Ground (SOG): Speed Over Ground is the measurement of the boat’s progress across a given  
distance, and is the speed measurement provided by GPS. An alternate, Speed Through Water, is provided  
by a speed paddlewheel, and is the measurement of the flow past the boat, which may vary depending on  
current speed and direction. Speed Over Ground is optimal for navigation because accurate destination  
times can be derived from this measurement. Humminbird® products allow for input and display of both  
speed measurements.  
Time To Go (TTG): Time To Go is the estimated time required to reach the destination waypoint. TTG is  
calculated using the SOG and DTG. See SOG and DTG.  
Track: A Track is a series of saved points that define the past path of the boat. These Track Points are saved  
at regular time intervals. Tracks are a useful and quick method to see where you’ve been, and an easy  
guide to follow to get you back to the starting point. Generally, all GPS units have a limited number of Track  
Points that can be saved before the unit runs out of memory and begins erasing the first track points saved.  
Because of this, the user can adjust the Track Point Interval menu to increase the amount of time between  
when points are saved, and thus extend the distance covered by a track. Tracks can also be permanently  
saved to memory, and re-displayed at the user’s option.  
Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and represents the  
most efficient path between the two points because it is a straight line. The TRK is measured in degrees  
(i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error and Course  
Over Ground.  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track,  
Waypoint, and Routes, but NO MAP in the background. See Chartplotter.  
Trolling Grid: Trolling Grid is a Humminbird® feature that displays a precise reference grid around a  
waypoint. This grid is used as a guide pattern for trolling around a specific area to assure a more efficient  
and complete coverage of that area. Trolling Grid resolution be changed by zooming in or out on the chart.  
The Trolling Grid can also be rotated on the display to orient it for optimal boat course for wave and wind  
conditions.  
UTC: UTC is an acronym for Universal Time Constant. UTC is the “standard time” used in navigation, and  
is the local time in Greenwich England. (UTC is equivalent to Greenwich Mean Time (GMT)). To display the  
correct Local Time in a Humminbird® GPS unit, the user must use the Local Time Zone menu and select the  
time zone (i.e. EST, CST).  
WAAS: WAAS is an acronym for Wide Area Augmentation System. WAAS is complementary technology  
to GPS that provides enhanced accuracy through correction signals broadcast from Federal Aviation  
Administration WAAS satellites stationed over the USA. These secondary signals are automatically  
received by the standard Humminbird® GPS Receiver. With WAAS signal, GPS accuracy is improved to  
within 3 meters 95% of the time. Outside the United States, regional governmental coalitions have created  
similar systems such as EGNOS (Europe) and MSAS (Japan).  
Waypoint: A Waypoint is the saved location (latitude, longitude) of a point of interest that is stored in a  
GPS receiver’s memory. This can include a marker buoy, dock, fishing hole or anywhere else the user may  
want to return to. Humminbird® products offer the ability to name and assign a symbol to the saved  
location. Depth, Date and Time of Day when the waypoint was created is also saved.  
Waypoint Target: Waypoint Target is a Humminbird® feature that displays a precise “bull’s eye” around a  
selected waypoint. This bull’s eye is used to easily monitor boat position relative to a waypoint, and is  
useful for fishing over submerged structure. With Waypoint Targets, a quick look at the screen lets you  
know how far off the waypoint the boat has drifted.  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact Humminbird®  
Contact the Humminbird® Customer Resource Center  
in any of the following ways:  
By Telephone  
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):  
1-800-633-1468  
By e-mail  
(typically we respond to your e-mail within three business days):  
[email protected]  
For direct shipping, our address is:  
Humminbird®  
Service Department  
678 Humminbird Lane  
Eufaula, AL 36027 USA  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Cell Phone 50Q User Manual
Granville Manufacturing Video Gaming Accessories DX6490 User Manual
Harbor Freight Tools Security Camera 94634 User Manual
Heat Glo LifeStyle Indoor Fireplace Exclaim 50 User Manual
Heath Zenith Home Safety Product P6036 User Manual
Hotpoint Cooktop C320IX User Manual
HP Hewlett Packard Model Vehicle HSG80 User Manual
Husqvarna Lawn Mower 2042 LS User Manual
Husqvarna Lawn Mower Accessory H354SG User Manual
Husqvarna Tiller DRT900E User Manual