English-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Trademarks
VIACCESS™ is a trademark of France Telecom.
CryptoWorks™ is a trademark of Philips Electronics N.V.
Irdeto is a trademark of Mindport BV.
Nagravision is a registered trademark of KUDELSKI S.A.
Conax is a trademark of Telenor Conax AS.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Thank you for purchasing a HUMAX TV. Please read this user manual carefully in
order to safely install, use and maintain the TV at maximum performance. Keep
this user manual next to your TV to ensure the best performance possible.
This user manual covers the LGB-19DRT and LGB-22DRT models.
The illustrations and on-screen displays in this user manual are for explanation
purpose and may vary slightly from the actual operations.
English-3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Safety Precautions
General Safety Precautions
Power
ꢀ3OXJꢀWKHꢀSRZHUꢀFRUGꢀLQWRꢀWKHꢀFRUUHFWꢀSRZHUꢀRXWOHWꢁꢀ$QꢀXQVWDEOHꢀFRQQHFWLRQꢀPD\ꢀFDXVHꢀ¿UHꢁ
ꢀDo not use damaged power cords or plugs, or use a loose wall outlet. This may cause electrical shock
RUꢀ¿UHꢁ
ꢀDo never touch the power cord with wet hands. This may cause electrical shock.
ꢀ'RꢀQRWꢀXVHꢀPXOWLSOHꢀGHYLFHVꢀZLWKꢀRQHꢀRXWOHWꢁꢀ2YHUKHDWLQJꢀWKHꢀRXWOHWꢀPD\ꢀFDXVHꢀ¿UHꢁ
ꢀDo not bend or pull out the power cord using force, nor place heavy objects over it. This may cause
HOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
ꢀ0DNHꢀVXUHꢀ\RXꢀSXOOꢀRXWꢀWKHꢀSRZHUꢀFRUGꢀKROGLQJꢀWKHꢀSOXJꢀLWVHOIꢁꢀ$QꢀLQWHUQDOꢀGLVFRQQHFWLRQꢀPD\ꢀFDXVHꢀ¿UHꢁ
ꢀWhen removing the product, turn off the power and pull out the plug from the power outlet. Also make
sure other devices including the antenna or the connectors are removed from the outlets before
UHORFDWLQJꢀWKHꢀSURGXFWꢁꢀ2WKHUZLVHꢀ\RXꢀPD\ꢀVXIIHUꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢀGXHꢀWRꢀDꢀGDPDJHGꢀSRZHUꢀFRUGꢁ
The mains plug shall remain readily operable.
Plug as disconnection device shall remain to be readily approached by user.
Installation
ꢀ.HHSꢀWKHꢀSURGXFWꢀDZD\ꢀIURPꢀDQ\ꢀKHDWLQJꢀGHYLFHVꢁꢀ3ODFLQJꢀLWꢀFORVHꢀWRꢀDꢀKHDWLQJꢀGHYLFHꢀPD\ꢀFDXVHꢀ¿UHꢁ
ꢀ.HHSꢀWKHꢀSRZHUꢀFRUGꢀDZD\ꢀIURPꢀDQ\ꢀKHDWLQJꢀGHYLFHVꢁꢀ$ꢀPHOWHGꢀFRDWLQJꢀPD\ꢀFDXVHꢀ¿UHꢀRUꢀHOHFWULFDOꢀ
shock.
ꢀPlace the antenna as far away as possible from any high-voltage cables.
7RXFKLQJꢀWKHꢀKLJKꢀYROWDJHꢀZLULQJꢀPD\ꢀFDXVHꢀ¿UHꢀRUꢀHOHFWULFDOꢀVKRFNꢁ
ꢀDo not install the product in oily, smoky or humid (or exposed to rain/water) places or automobiles.
7KLVꢀPD\ꢀFDXVHꢀ¿UHꢁ
ꢀThe connection between the external antenna and the internal wiring should be turned inside to avoid
DQ\ꢀLQÀRZꢀRIꢀUDLQꢁꢀ([SRVLQJꢀWKHꢀ/&'ꢀWRꢀZDWHUꢀꢂUDLQꢃꢀZLOOꢀFDXVHꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
ꢀDo not use the product in humid places. Humidity will shorten the life of the product and may cause an
HOHFWULFDOꢀVKRUWDJHꢀRUꢀ¿UHꢁ
ꢀDo not use the product in places with low temperatures (below 5°C).
ꢀAvoid installing the product in poorly ventilated places. Internal overheating may cause an electrical
VKRUWDJHꢀDQGꢀ¿UHꢁ
ꢀBe sure not to cover the ventilator (with a table-cloth or curtain, etc.). Internal overheating may cause
DQꢀHOHFWULFDOꢀVKRUWDJHꢀDQGꢀ¿UHꢁ
ꢀDo not install the product in an unstable place or on a small stand. The product may cause serious
injury, if it falls on somebody (especially children). Install it on an even, stable place as it is front-heavy.
ꢀ'RꢀQRWꢀLQVWDOOꢀWKHꢀSURGXFWꢀRQꢀWKHꢀÀRRUꢁꢀ6RPHRQHꢀꢂHVSHFLDOO\ꢀFKLOGUHQꢃꢀPD\ꢀWULSꢀRYHUꢀLWꢁ
English-4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Safety Precautions
Usage
ꢀUnplug the product from the wall outlet and do not touch the antenna during a thunderstorm. This will
prevent damage to the unit due to lightning and power-surges.
ꢀKeep dust or water away from the pins or touching points of the power plug.
7KLVꢀZLOOꢀSUHYHQWꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
ꢀKeep children from climbing over the product. The device may cause serious injury or death if it falls
on them.
ꢀDo not place anything over the product that children may try to reach. The device may cause serious
injury or death if it falls on them.
ꢀWhen removing the battery from the product, keep it out of children’s reach.
If a child swallows a battery, consult a doctor immediately.
ꢀ8VHꢀRQO\ꢀVSHFL¿HGꢀEDWWHULHVꢀDQGꢀGRꢀQRWꢀXVHꢀDQꢀROGꢀEDWWHU\ꢀDORQJꢀZLWKꢀDꢀQHZꢀRQHꢁꢀ$OLJQꢀWKHꢀEDWWHULHVꢀ
according to the correct polarity (+ or -). Aligning them incorrectly may cause an internal explosion
or a leakage of the internal liquid, leading to electrical shock, physical damage or pollution of the
surroundings.
ꢀ'RꢀQRWꢀLQVHUWꢀDQ\ꢀPHWDOꢀRUꢀDꢀÀDPPDEOHꢀREMHFWꢀRUꢀDQꢀDOLHQꢀVXEVWDQFHꢀLQWRꢀWKHꢀYHQWLODWRUꢄꢀWKHꢀ$9ꢀLQSXWꢀ
terminal or the slots for the modules or Smartcards. This may cause damage to the product and
reduce its life span.
ꢀDo not disassemble, repair or reconstruct the product at your discretion. This may cause electrical
VKRFNꢀRUꢀ¿UHꢁꢀ&RQWDFWꢀ\RXUꢀORFDOꢀFXVWRPHUꢀVXSSRUWꢁ
ꢀ.HHSꢀWKHꢀSURGXFWꢀDZD\ꢀIURPꢀLQÀDPPDEOHꢀVSUD\HUVꢀRUꢀLJQLWDEOHꢀREMHFWVꢁ
([SRVXUHꢀWRꢀWKHVHꢀPD\ꢀFDXVHꢀH[SORVLRQꢀRUꢀ¿UHꢁ
ꢀ'RꢀQRWꢀSODFHꢀZDWHUꢅSRWVꢄꢀÀRZHUꢀYDVHVꢄꢀEHYHUDJHꢀFDQVꢄꢀVPDOOꢀPHWDOVꢀRUꢀKHDY\ꢀREMHFWVꢀRYHUꢀWKHꢀSURGXFWꢁꢀ
&RQWDFWꢀRIꢀWKHVHꢀFRQWHQWVꢀZLWKꢀWKHꢀSURGXFWꢀPD\ꢀFDXVHꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢄꢀZKLOHꢀDQ\ꢀIDOOLQJꢀRIꢀWKHꢀ
product may cause injury.
ꢀIf the product breaks down, turn off the power and unplug it from the outlet before contacting Customer
6XSSRUWꢁꢀ7KLVꢀZLOOꢀSURWHFWꢀ\RXꢀIURPꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
ꢀWhen you notice something strange like an odd noise, smell something burning or see smoke, unplug
WKHꢀSRZHUꢀFRUGꢀDQGꢀFRQWDFWꢀ\RXUꢀORFDOꢀ&XVWRPHUꢀ6XSSRUWꢁꢀ'RꢀWKLVꢀWRꢀDYRLGꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
Do not use sharp tools such as a pin or a pencil near the TV, as they may scratch the LCD surface.
Do not use a solvent, such as benzene, to clean the TV, as it will damage the LCD surface.
Cleaning
ꢀ 8QSOXJꢀWKHꢀSRZHUꢀFRUGꢀEHIRUHꢀFOHDQLQJꢀWKHꢀSURGXFWꢁꢀ7KLVꢀPD\ꢀFDXVHꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
ꢀ 'RꢀQRWꢀVSULQNOHꢀZDWHUꢀRQꢀWKHꢀSURGXFWꢁꢀ7KLVꢀPD\ꢀFDXVHꢀHOHFWULFDOꢀVKRFNꢀRUꢀ¿UHꢁ
Use only a soft dry cloth as the surface is weak on scratch. Do not use chemicals like wax, benzene,
alcohol, thinners, aroma, lubricator or cleanser.
English-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1 >> Getting Started ................................................................................................8
Package Contents................................................................................................................................... 8
Front & Top Panel.................................................................................................................................... 9
Rear & Side Panel................................................................................................................................. 10
Remote Control Buttons........................................................................................................................ 12
Chapter 2 >> Connecting Your TV.......................................................................................14
Connecting to an Aerial or a Cable TV.................................................................................................. 14
Connecting to the VCR.......................................................................................................................... 15
Connecting to the DVD Player .............................................................................................................. 16
Connecting to the Set-Top Box.............................................................................................................. 18
Connecting to the PC ............................................................................................................................ 19
Connecting a HDD (Hard Disk Drive).................................................................................................... 20
Connecting Headphones....................................................................................................................... 20
Conditonal Access System.................................................................................................................... 21
Chapter 3 >> Initial Setup Wizard........................................................................................22
Running Initial Setup Wizard................................................................................................................. 22
Chapter 4 >> Basic Operation.............................................................................................23
Turning on Your TV................................................................................................................................ 23
Selecting the Menu Language............................................................................................................... 23
Selecting the Main Input Source ........................................................................................................... 24
Viewing Channel List............................................................................................................................. 24
Displaying Information........................................................................................................................... 25
Digital Programme Features ................................................................................................................. 27
Chapter 5 >> Using the Electronic Programme Guide (EPG).............................................28
Viewing the Electronic Programme Guide(EPG)................................................................................... 28
Viewing Reserved Programme.............................................................................................................. 30
Finding a Programme............................................................................................................................ 30
Chapter 6 >> Setting Channels...........................................................................................31
Scanning Analog Channels Automatically............................................................................................. 31
Scanning Analog Channels Manually.................................................................................................... 31
Editing Analog Channels ....................................................................................................................... 33
Scanning Digital Channels Automatically.............................................................................................. 34
Scanning Digital Channels Manually..................................................................................................... 35
Editing Digital Channels ........................................................................................................................ 36
Editing Favourite Digital Channels ........................................................................................................ 38
Chapter 7 >> Setting the Picture.........................................................................................40
Selecting a Picture Mode ...................................................................................................................... 40
Customizing the Picture Settings .......................................................................................................... 40
Fleshtone............................................................................................................................................... 41
Colour Temperature............................................................................................................................... 41
Adjusting Backlight Brightness.............................................................................................................. 42
English-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 8 >> Setting the Sound..........................................................................................43
Setting the Sound Effect........................................................................................................................ 43
Adjusting the Sound Balance ................................................................................................................ 43
Adjusting the Volume Automatically ...................................................................................................... 44
Setting the TruSurround XT................................................................................................................... 44
Chapter 9 >> Setting the System ........................................................................................45
Setting the Time Information ................................................................................................................. 45
Changing the Password ........................................................................................................................ 46
Common Interface................................................................................................................................. 46
Panel Off................................................................................................................................................ 46
VFD Clock ............................................................................................................................................. 47
Default Settings..................................................................................................................................... 47
Chapter 10 >> DTV Setup...................................................................................................48
Parental Control .................................................................................................................................... 48
Language Setting .................................................................................................................................. 49
Miscellaneous Settings.......................................................................................................................... 50
Software Update.................................................................................................................................... 51
Status .................................................................................................................................................... 54
Signal Detection .................................................................................................................................... 54
Chapter 11 >> Recording and Playback..............................................................................55
Time Shifted Recording (TSR) .............................................................................................................. 55
Instant Recording .................................................................................................................................. 58
Recording Schedule.............................................................................................................................. 59
Programme Playback in the Play List.................................................................................................... 61
Chase Play............................................................................................................................................ 62
Editing Recorded Programmes ............................................................................................................. 62
MP3....................................................................................................................................................... 65
HDD Control.......................................................................................................................................... 66
Chapter 12 >> Setting the Aspect Ratio..............................................................................67
Chapter 13 >> Using the Teletext........................................................................................68
Chapter 14 >> Setting the PC .............................................................................................69
$XWRꢀ&RQ¿JXUH ...................................................................................................................................... 69
Position.................................................................................................................................................. 69
Clock ..................................................................................................................................................... 70
Phase .................................................................................................................................................... 70
Menu Map............................................................................................................................71
Troubleshooting...................................................................................................................72
6SHFL¿FDWLRQ ........................................................................................................................74
Service and Support............................................................................................................75
English-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
Package Contents
LCD TV
User’s manual
Remote control
AAA batteries (X2)
Portable HDD (80GB)
USB cable
HDD stand
Warning:
1. It is recommended to use the supplied hard disk drive. This TV provides best performance with the
supplied hard disk drive.
2. The company shall not be liable for problems caused by the misuse or improper installation of the
hard disk drive.
English-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
Front & Top Panel
4
5
6
7
8
1
2
3
1
Remote control sensor
Receives commands directly from your remote control and passes them
on.
2
3
4
5
6
7
8
Standby indicator
Turns on blue during the Standby mode.
VFD (Vacuum Fluorescent Display)
Used for the radio channels.
P
buttons
Selects channels.
VOL
buttons
Adjusts the volume.
TV/AV button
Displays input source.
MENU button
Displays the on-screen menu.
Standby button
Switches between operation and standby modes.
English-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
Rear & Side Panel
Side Panel
1
4
5
2
3
1
2
AV2 (CVBS) INPUT
Connects to the audio and video output jacks of a camcorder, videogame
and similar devices.
S-VIDEO INPUT
Connects to the S-Video jack of a camcorder, video game console, and
similar devices.
3
4
5
H/P (Headphones)
Connects to headphones.
CI (Common Interface) SLOT
A slot for a CI Module.
USB
Connects to the supplied hard disk drive. (for PVR function)
English-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
Rear Panel
COMPONENT
1
2
3
4
5
6
1
2
RF INPUT
Connects to an antenna or a cable system.
AV1 (SCART) INPUT
Inputs or Outputs for external devices, such as VCR, DVD, video game
console or video disc players.
3
4
5
COMPONENT INPUT
Connects to Video (Y/Pb/Pr) and audio (L/R) components.
PC INPUT/PC AUDIO INPUT
Connect to the video and audio output jacks on your PC.
HDMI INPUT
Receives uncompressed digital audio and video signals from the device that
VXSSRUWVꢀ+LJKꢀ'H¿QLWLRQꢀ0XOWLꢅPHGLDꢀ,QWHUIDFHꢀꢂ+'0,ꢃꢁ
6
SERVICE ONLY (RS232C)
Connects to the PC to update the software of the TV.
English-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
Remote Control Buttons
STANDBY
TV/AV
Switches between operation and
standby modes.
Displays all available input sources.
3UHVVꢀWKHꢀŸꢆźꢀEXWWRQꢀWRꢀVHOHFWꢀDꢀ
required input source.
SNOOZE
Switch into the standby mode
momentarily.
MUTE
Mutes the sound. To cancel, press the
MUTE, VOL+, or VOL- button.
Number (0~9) buttons
Enters the channel number for direct
display. Used to enter digit numbers.
SLEEP
Selects a preset time interval for
switching the TV to standby mode
automatically.
FAV
In Analog TV input mode, switches
to a favourite channel. Circulates
through favourite channels in
sequent order while watching TV.
In Digital TV input mode, display the
favourite channel list.
PIC MODE
Selects the picture mode (Standard,
Dynamic, Movie, Mild, or User).
SND EFFECT
Selects the sound effect (Flat,
Speech, Movie, Music, or User).
LIST
Displays the channel list.
WIDE
Coloured Buttons
Select the aspect ratio (Auto, 4:3,
14:9, Full or Zoom).
Used for interactive applications in
the EPG, Edit Channels and Teletext
mode.
EPG
Displays the Electronic Programme
Guide (EPG) in Digital TV input.
BACK
PLAYLIST
Returns to the previous display.
Displays the recorded programme list
in Digital TV input.
MENU
Displays the On Screen Display
(OSD) menu.
SCHEDULE
Displays the reserved programme list
in Digital TV input.
EXIT
Exits from the currently displayed
menu.
OPT+ (RED)
Displays the channel options while
watching a programme in Digital TV
input.
$UURZꢀꢁŸꢂźꢂŻꢂŹꢃ buttons
Controls the selection in the On
Screen Display (OSD) menu.
TEXT
OK
Shows MHEG (digital teletext
information)
&RQ¿UPVꢀꢂVDYHꢀRUꢀHQWHUꢃꢀ\RXUꢀFKRLFHꢀ
in the On Screen Display (OSD)
menu.
(SOUNDTRACK)
Selects the sound mode (Stereo,
Mono, etc.) in Analog TV input or the
soundtrack list in Digital TV input.
VOL+/-
Adjusts the volume.
P+/- (Page)
(Subtitle)
Switches channels or pages.
Displays the subtitle language list in
Digital TV input.
TV/RADIO
Switches between digital TV and
radio modes.
(GAME)
Displays the game in Digital TV input.
INFO
Displays information on the current
channel or input.
English-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 >> Getting Started
TELETEXT Function Buttons
PLAYBACK Control Buttons
(only in Digital TV input)
(Teletext On/Off)
Activates or deactivates the teletext
service.
(PLAY)
Plays at normal speed or resumes.
(Mix)
(PAUSE)
Overlaps the teletext with the
broadcasting screen.
Adjusts the opacity to the background
in Teletext mode.
Pauses the live programme or recording.
(RECORD)
Records programme.
(FAST REWIND)
(Index)
Rewinds at high speed. Each time
you press this button the rewind
speed is increased.
Displays the teletext index page.
(Cancle)
Displays the TV programme when
searching for the new teletext page.
(FAST FORWARD)
Fasts forward at high speed. Each
time you press this button the fast
forward speed is increased.
(Reveal)
Shows the hidden information.
(Mode)
(STOP)
Selects the teletext mode (LIST/
FLOF)
Stops a recording or goes to the live
programme.
(Size)
(INSTANT REPLAY)
Displays the double-size letters.
Goes back 7 seconds in Digital TV input.
(Hold)
(INSTANT SKIP)
Holds the current teletext page not
updating it.
Skips the programme ahead 30
seconds in Digital TV input
(Time)
(A-B)
Display the current time at the top
right hand corner of the screen..
3OD\VꢀEDFNꢀDꢀVSHFL¿HGꢀEORFNꢀUHSHDWHGO\ꢁ
(SLOW MOTION)
Plays the programme in slow motion.
Each time you press this button,
speed is slowed progressively more.
(ADD BOOKMARK)
Saves the current viewing position as
a bookmark.
(BOOKMARK LIST)
Displays the list of saved viewing
positions.
Inserting Batteries into the Remote Control
You must insert or replace the batteries in the remote control when:
+ You just purchased TV
+ Remote control does not work
1
2
3
Remove the cover on the rear of the remote control by pressing the symbol
ꢂźꢃꢀGRZQZDUGVꢀDQGꢀWKHQꢀSXOOLQJꢀ¿UPO\ꢀWRꢀUHPRYHꢀLWꢁ
Insert two AAA size 1.5V batteries ensuring that the plus(+) and minus(-)
signs of the batteries are correctly aligned.
Close the cover.
Note: Do not mix different battery types such as alkaline with manganese.
English-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Connecting to an Aerial or a Cable TV
To view the television channels correctly, a signal must be received by the
broadcasting provider.
COMPONENT
or
Cable TV
1
2
Connect the RF coaxial cable from an aerial or a cable TV to the RF jack on
the rear of the TV.
Turn on the TV, and then press the TV/AV button to select Digital TV or
Analog TV.
Notes:
1. To receive an optimal signal, it is recommended that you use a 75 ohm IEC-
type coaxial cable.
2. For proper reception of signals, an external antenna is required. For best
reception, an outdoor antenna is recommended.
3. To improve the picture quality in a poor signal area, please purchase a signal
DPSOL¿HUꢀDQGꢀLQVWDOOꢀSURSHUO\ꢁ
English-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Connecting to the VCR
Using the SCART Cable
COMPONENT
SCART cable
VCR
1
Connect the SCART cable between the AV1 jack on TV and the SCART jack
on your VCR.
2
3
Turn on the TV, and then press the TV/AV button to select AV1.
Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on your VCR. (Refer to the VCR owner’s manual)
Using the Audio/Video (Composite) Cable
Audio cable
Video cable
VCR
1
2
Connect the video cable between the VIDEO (AV2) input jack on TV and the
video output jack on your VCR.
Connect the audio cable between the AUDIO-L/R (AV2) input jacks on TV
and the audio output jacks on your VCR.
3
4
Turn on the TV, and then press the TV/AV button to select AV2.
Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on the VCR. (Refer to the VCR owner’s manual)
English-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Using the Audio/S-Video Cable
S-Video carries the video data as two separate signals (brightness and colour),
unlike composite video which carries the entire set of signals in one package.
S-Video does not carry audio. Hence, a separate audio connection is required.
Audio cable
S-Video cable
VCR
1
2
Connect the S-Video cable between the S-VIDEO input jack on TV and the
S-Video output jack on your VCR.
Connect the audio cable between the AUDIO-L/R (AV2) input jacks on TV
and the audio output jacks on your VCR.
3
4
Turn on the TV, and then press the TV/AV button to select S-Video.
Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on your VCR. (Refer to the VCR owner’s manual)
Connecting to the DVD Player
Using the SCART Cable
COMPONENT
SCART cable
DVD
1
Connect the SCART cable between the AV1 jack on TV and the SCART jack
on your DVD player.
2
3
Turn on the TV, and then press the TV/AV button to select AV1.
Turn on your DVD player, and then insert a DVD into the DVD player and
press the PLAY button on your DVD player. (Refer to the DVD player
owner’s manual)
English-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Using the Audio/Component Video Cable
COMPONENT
Audio cable
Component cable
DVD
1
2
Connect the component video cables between the COMPONENT VIDEO
- Y/Pb/Pr input jacks on TV and the component video output jacks on your
DVD player.
Connect the audio cable between the AUDIO-L/R (for COMPONENT) input
jacks on TV and the audio output jacks on your DVD player.
3
4
Turn on the TV, and then press the TV/AV button to select Component.
Turn on your DVD player, then insert a DVD into the DVD player and press
the PLAY button on your DVD player. (Refer to the DVD player owner’s
manual)
Note: 'HSHQGLQJꢀRQꢀWKHꢀPDQXIDFWXUHUꢄꢀWKHꢀ<ꢆ3Eꢆ3UꢀMDFNVꢀPD\ꢀEHꢀLGHQWL¿HGꢀDVꢀ
Y/PB/PR, Y/B-Y/R-Y or Y/CB/CR.
Using the HDMI Cable
+LJKꢅ'H¿QLWLRQꢀ0XOWLPHGLDꢀ,QWHUIDFHꢀꢂ+'0,ꢃꢀLVꢀWKHꢀOHDGLQJꢀQHZꢀVWDQGDUGꢀIRUꢀ
Digital video and audio interconnection.
COMPONENT
HDMI cable
DVD
1
Connect the HDMI cable between the HDMI input jack on TV and the HDMI
output jack on your DVD player.
2
3
Turn on the TV, and then press the TV/AV button to select HDMI.
Turn on your DVD player, then insert a DVD into the DVD player and press
the PLAY button on your DVD player. (Refer to the DVD player owner’s
manual)
English-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Connecting to the Set-Top Box
Using the SCART cable
COMPONENT
SCART cable
STB
1
Connect the SCART cable between the AV1 jack on TV and the SCART jack
on your STB.
2
3
Turn on the TV, and then press the TV/AV button to select AV1.
Turn on your STB. (Refer to the STB owner’s manual)
Using the Audio/Component Video Cable
COMPONENT
Audio cable
Component cable
STB
1
2
Connect the component video cables between the COMPONENT VIDEO
- Y/Pb/Pr input jacks on TV and the component video output jacks on your
STB.
Connect the audio cable between the AUDIO-L/R (for COMPONENT) input
jacks on TV and the audio output jacks on your STB.
3
4
Turn on the TV, and then press the TV/AV button to select Component.
Turn on your STB. (Refer to the STB owner’s manual)
Note: 'HSHQGLQJꢀRQꢀWKHꢀPDQXIDFWXUHUꢄꢀWKHꢀ<ꢆ3Eꢆ3UꢀMDFNVꢀPD\ꢀEHꢀLGHQWL¿HGꢀDVꢀ
Y/PB/PR, Y/B-Y/R-Y or Y/CB/CR.
English-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Using the HDMI Cable
+LJKꢅ'H¿QLWLRQꢀ0XOWLPHGLDꢀ,QWHUIDFHꢀꢂ+'0,ꢃꢀLVꢀWKHꢀOHDGLQJꢀQHZꢀVWDQGDUGꢀIRUꢀ
Digital video and audio interconnection.
COMPONENT
HDMI cable
STB
1
Connect the HDMI cable between the HDMI input jack on TV and the HDMI
output jack on your STB.
2
3
Turn on the TV, and then press the TV/AV button to select HDMI.
Turn on your STB. (Refer to the STB owner’s manual)
Connecting to the PC
COMPONENT
Audio cable
PC cable
PC
1
2
3
Connect the PC cable between the PC jack on TV and the PC output jack on
your PC.
Connect the audio cable between the PC AUDIO jack on TV and the audio
output jack on your PC.
Turn on the TV, and then press the TV/AV button to select PC.
Supported Display Resolution (PC)
Horizontal
Vertical
Mode
VESA
Resolution
Frequency (kHz)
Frequency (Hz)
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
31.5
37.9
48.4
47.8
47.7
60
60
60
60
60
English-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Connecting a HDD (Hard Disk Drive)
To use the PVR (Personal Video Recorder) function, you should connect the
supplied portable hard disk drive.
1
2
First, turn off the TV.
Connect the USB cable (supplied) between the USB jack on TV and the
USB jack on the portable hard disk drive (supplied).
3
Turn on the TV, and then select Digital TV using the TV/AV button to use
the PVR function.
Warning:
1. It is recommended to use the supplied hard disk drive. This TV provides best
performance with the supplied hard disk drive. If you connect the other hard disk
drive to your TV, the TV will format it.
2. Do not connect the storage device that the capacity is too little (such as USB
memory stick).
3. Do not connect to the USB jack on your TV the other device besides the storage
device such as a hard disk drive.
4. Please turn the power off before connecting or disconnecting the hard disk drive.
If you connect the hard disk drive while watching TV, the TV will be rebooted.
Connecting Headphones
Connect a set of headphones to H/P jack on TV if you want to watch a television
programme without disturbing other people close to you.
Note: Prolonged use of headphones at a high volume may cause health
damage on your ears.
English-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 >> Connecting Your TV
Conditonal Access System
(for the digital channels only)
Conditional Access System (CAS) is a technology used to control access
to digital television (DTV) services to authorised users by encrypting the
transmitted programming.
Inserting a CI Module (with Smartcard)
CI Module looks like a PC Card (called PCMCIA) for laptops. There are different
kinds of CI Modules, suitable for different coding systems.
Smartcard
CI-Module
1
Follow the instructions of the module and insert the Smartcard into the
Common Interface (CI) module.
2
3
Keep the CI module(with the Smartcard) vertically.
Insert the CI module completely into the slot.
Note: Ensure the Smartcard or CI module is inserted in the right direction.
Inserting in the wrong direction may cause damage to the Smartcard or CI
module.
English-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 >> Initial Setup Wizard
Running Initial Setup Wizard
:KHQꢀ\RXꢀWXUQꢀRQꢀ\RXUꢀ79ꢀIRUꢀWKHꢀ¿ꢀUVWꢀWLPHꢀDIWHUꢀSXUFKDVHꢀRUꢀSHUIRUPꢀWKHꢀGHIDXOWꢀ
setting, the initial setup wizard will appear automatically. You can easily setup
the available analog and digital channels using the wizard.
W i z a r d
English
UK
Language
Country
Channel Search
1
6HOHFWꢀWKHꢀODQJXDJHꢀRIꢀ\RXUꢀFKRLFHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁꢀ7KHꢀ2Qꢀ6FUHHQꢀ
Display (OSD) menu will be shown in the selected language.
2
3
4
Select CountryꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Move
Select
6HOHFWꢀWKHꢀFRXQWU\ꢀZKHUHꢀ\RXꢀDUHꢀQRZꢀORFDWHGꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
W i z a r d
Select Channel SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
It starts to scan channels. First scans analog and then digital channels.
The scanned channels are automatically saved in order. To stop scanning
channels, press the BACK button.
English
UK
Language
Country
Channel Search
Analog Channel Found
Digital Channel Found
90
25
5
After the channel scanning completes, press the BACK button to exit
VHDUFKꢁꢀ7KHꢀ¿ꢀUVWꢀVFDQQHGꢀGLJLWDOꢀFKDQQHOꢄꢀLIꢀRQO\ꢄꢀZLOOꢀEHꢀDXWRPDWLFDOO\ꢀ
displayed.
Scan Progress
80%
Stop
Note: If you do not want to setup the channels at this time, you can setup it later
using the Channel menu.
English-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 >> Basic Operation
Turning on Your TV
1
Connect the power cord on TV to the wall outlet. The standby indicator lights
up.
2
Press the STANDBY button on your remote control (or on the top of your
TV) to turn on the TV.
Note: To set your TV in standby mode, press the STANDBY button again on the
remote control or ( ) on the top of your TV. It saves the electric usage when
you want to stop watching TV temporarily (during a meal, for example).
3
To turn off the TV, disconnect the power cord.
Note: Do not leave your TV in standby mode for too long (on holiday, for
example). Turn off the TV by disconnecting the power cord.
Selecting the Menu Language
You can select the language for displaying menus and indications.
>
S y s t e m
Language
English
1
2
3
Press the MENU button.
Time Setting
Change Password
CI
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
Disable
Disable
6HOHFWꢀWKHꢀODQJXDJHꢀRIꢀ\RXUꢀFKRLFHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The On Screen Display (OSD) menu will be shown in the selected language.
Move
Select
4
Press EXIT button to return to Live TV or press the BACK button to return to
the previous menu.
English-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 >> Basic Operation
Selecting the Main Input Source
Once you have connected your various audio and video systems, you can view
different sources by selecting input sources.
1
2
Press the TV/AV button.
6HOHFWꢀWKHꢀPDLQꢀLQSXWꢀDPRQJꢀWKHꢀVRXUFHVꢀEHORZꢀXVLQJꢀWKHꢀŸꢀRUꢀźꢀEXWWRQꢁ
Digital TV > Analog TV > AV1 > AV2 > S-Video > Component > PC >
HDMI
3
4
Press the OK button.
In addition, press the TV/RADIO button to switch to digital TV from different
sources.
Viewing Channel List
You can view the list of all analog and digital channels using the LIST button
and switch to other channels on the channel list. You can also display the digital
channel list by pressing the OK button.
Analog channel list appears only in Analog TV input mode and digital channel
list appears only in Digital TV input mode.
T Analog channel list
1
2
Press the LIST button while watching the analog or digital channels.
C h a n n e l s
To change the channel in analog or digital channel list, select your desired
FKDQQHOꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button. The selected
channel is displayed.
Notes:
1. Within the digital channel list, press the P+/- (Page) button to move to the
next or previous page.
2. Within the digital channel list, you can move to your desired channel directly
by entering the channel number using NUMBER (0~9) button.
3. Whenever you press the TV/RADIO button while the digital channel list is
displayed, the digital channel list will switch between TV and radio channel lists.
4. To display scramble icon ( ) in the digital channel list, select On in MENU-
DTV Setup-Miscellaneous-Option in CH List.
T Digital channel list
Changing Digital Channel List Group
You can select digital channel list by group.
1
2
3UHVVꢀWKHꢀŹꢀEXWWRQꢀLQꢀGLJLWDOꢀFKDQQHOꢀOLVWꢀWRꢀYLHZꢀWKHꢀJURXSꢀOLVWꢁ
6HOHFWꢀ\RXUꢀGHVLUHGꢀFKDQQHOꢀJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀWRꢀGLVSOD\ꢀLWVꢀVXEꢅ
groups and press the OKꢀRUꢀŹꢀEXWWRQꢁ
3
4
6HOHFWꢀ\RXUꢀGHVLUHGꢀVXEꢅJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK
button.
The channel list for the selected sub-group is displayed.
Note: The sub-group of favourite channel list may exist or not depending on
\RXUꢀFRQ¿ꢀJXUDWLRQꢁ
English-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 >> Basic Operation
Displaying Information
Programme Information (for digital channels only)
3URJUDPPHꢀLQIRUPDWLRQꢀLVꢀDOZD\VꢀGLVSOD\HGꢀIRUꢀDꢀVSHFL¿FꢀSHULRGꢀRIꢀWLPHꢀ
whenever you switch digital channels. You can view the information by pressing
the INFO button while watching a digital programme.
Programme information is available only for digital channels.
The Programme Information is displayed at the bottom of the screen as
followings.
T General Information
1
2
3
Channel number and channel name
Programme name
Detail programme information: displayed if detailed programme information
is provided. Press the INFO button again to display the detailed information.
4
5
6
Channel list name
Current time
Icons
T Detailed Information
Displayed only if the programme is recording.
REC
Displayed only if the programme is reserved.
Represents parental control level.
Indicates the minimum level of ages for viewing the programme.
-if supplied by the broadcaster.
Displayed only when the channel is a locked channel.
Displayed only when the channel is a scrambled channel (Pay TV channel).
Displayed only when subtitle information is available.
Displayed only when there is any teletext information.
Displayed only when the programme is broadcast in the compressed
bitstream audio signal.
MHEG Displayed when the channel supports teletext (MHEG).
Displayed when the channel supports data channel.
D
7
8
Next programme Information: displayed if next programme information is
provided. 3UHVVꢀWKHꢀŹꢀEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀQH[WꢀSURJUDPPHꢀLQIRUPDWLRQꢁ
Programme broadcasting time and progress bar
Notes:
1. If there is no available programme information, programme information is not
displayed.
2. Press the INFO button again to hide the information box.
3.ꢀ,IꢀWKHꢀGHWDLOHGꢀSURJUDPPHꢀLQIRUPDWLRQꢀLVꢀPRUHꢀWKDQꢀRQHꢀSDJHꢄꢀXVHꢀŸꢆźꢀ
button to move to the previous or next page.
English-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 >> Basic Operation
Simple Information
You can view the information such as the channel number (or input source),
current time and sound mode (or source resolution) by pressing the INFO button
while watching an analog TV channel or external input source.
P
11 -----
Component
10:25
10:25
AV1
Stereo
720x480p
10:25
Ÿꢀ$QDORJꢀ79ꢀ,QSXW
Ÿꢀ([WHUQDOꢀ,QSXWꢀ
(AV1/2, S-Video)
Ÿꢀ([WHUQDOꢀ,QSXW
(Component, PC, HDMI)
Note: Whenever you switch channels, this information is displayed for 2
seconds.
English-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 >> Basic Operation
Digital Programme Features
(for digital channels only)
These functions are available only for digital channels.
Displaying Digital Teletext (MHEG)
If your chosen channel has teletext (MHEG) features, you can access them.
Teletext services often load automatically shortly after the Digital Teletext window
is displayed. In which case, simply follow the given instructions(press color
buttons).
1
2
3
Press the TEXT button to access teletext(MHEG) features.
Press the TEXT button again to return to normal viewing.
Press the P+/- button to exit this service.
Note: You should select Off from the subtitle language to display
teletext(MHEG).
Changing Subtitle Language
If the current programme provides Subtitle information, you can select the
language for the Subtitle.
1
2
Press the SUBTITLE button to display the subtitle language list.
6HOHFWꢀ\RXUꢀGHVLUHGꢀVXEWLWOHꢀODQJXDJHꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀ
OK button. Then the subtitle will be displayed in the selected language at the
bottom of the screen.
3
Select Off from the subtitle language list if you do not wish to display
subtitles in the screen.
Changing Audio Options
If the current programme is available in multiple audio languages, you can select
the language that you wish to listen in.
1
2
Press the SOUNDTRACK button to display soundtrack list.
6HOHFWꢀ\RXUꢀGHVLUHGꢀDXGLRꢀODQJXDJHꢀXVLQJꢀWKHŸꢆźꢀDQGꢀOK button to change
the audio soundtrack.
3
4
6HOHFWꢀ$XGLRꢀSUHIHUHQFHꢂOHIWꢄꢀULJKWꢄꢀVWHUHRꢃꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQVꢄꢀDQGꢀSUHVVꢀ
the OK button.
Press the EXIT or SOUNDTRACK button to exit the soundtrack list.
English-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 >> Using the Electronic Programme Guide (EPG)
The Electronic Programme Guide (EPG) displays programme information about
each digital channel, based on the date and time. You can also schedule your
watching or recording using the information given.
Electronic Programme Guide (EPG) is available only for digital channels.
Note: Press the EPG or EXIT button to exit the EPG screen.
Viewing the Electronic Programme Guide(EPG)
You can view programme information for all digital channels.
1
2
Press the EPG button.
Move to previous or next programme within the same channel using the
ŻꢆŹꢀEXWWRQꢁ
3
0RYHꢀWRꢀDQRWKHUꢀFKDQQHOꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁꢀ,IꢀWKHUHꢀDUHꢀPXOWLSOHꢀ
channels, use the P+/- (Page) button to move to channels by page. Also,
you can enter the channel number using the NUMBER(0-9) buttons on the
remote control to move to the channel directly.
4
5
Select a programme and press the OK button. Then you can watch the
programme if it is on air.
Press the INFO button in the selected programme to view the detailed
information (if available) of the selected programme.
Group
Time Bar
Schedule
Find
Viewing by Channel List Groups
You can view programme information of the selected channel list by groups.
1
2
3
4
Press the EPG button.
Press the RED button to display the channel list group.
6HOHFWꢀDꢀFKDQQHOꢀOLVWꢀJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
0RYHꢀWKHꢀFXUVRUꢀWRꢀWKHꢀVXEꢅJURXSꢀXVLQJꢀWKHꢀŹꢀEXWWRQꢄꢀVHOHFWꢀDꢀVXEꢅJURXSꢀ
XVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button. The programme guide for
the selected channel list is displayed.
Channel Group
Numeric
Alphabet
TV
Radio
Favourite
Schedule
Group
Time Bar
Find
English-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 >> Using the Electronic Programme Guide (EPG)
Viewing Using Time Bar
You can quickly search the time zone using the time bar.
1
2
3
Press the EPG button.
Press the GREEN button to display time bar.
6HOHFWꢀWKHꢀHDFKꢀEXWWRQꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button to
move the time bar. If you press the button repeatedly, the same operation is
repeated.
4
Each button functions as follows.
Now
Żꢀ
Moves to the current programme where the cursor is located.
0RYHVꢀEDFNꢀWRꢀWKHꢀSUHYLRXVꢀSURJUDPPHꢀRUꢀꢇꢈꢀPLQXWHVꢀEHIRUHꢁ
0RYHVꢀIRUZDUGVꢀWRꢀWKHꢀQH[WꢀSURJUDPPHꢀRUꢀꢇꢈꢀPLQXWHVꢀDKHDGꢁ
0RYHVꢀEDFNꢀWRꢀꢉꢀKRXUVꢀEHIRUHꢁ
Źꢀ
ŻŻꢀ
ŹŹꢀ
0RYHVꢀIRUZDUGVꢀWRꢀꢉꢀKRXUVꢀDKHDGꢁ
Now
Day
Day
Ż'D\ꢀ 0RYHVꢀEDFNꢀWRꢀRQHꢀGD\ꢀEHIRUHꢁ
'D\Źꢀ 0RYHVꢀIRUZDUGVꢀWRꢀRQHꢀGD\ꢀDKHDGꢁ
5
Select
button and press the OK button to exit the time bar.
Reserving a Programme
You can reserve a watching or recording of the future programmes in the
Electronic Programme Guide (EPG).
1
2
Press the EPG button.
Select the desired programme and press the OK button to reserve the
programme. When a reservation has been completed, the icon ( ) is
displayed on the reserved programme. Press the OK button again to cancel
reservation.
Group
Time Bar
Schedule
Find
3
4
Press the YELLOW button to move to the Schedule screen. The schedule
screen displays the reserved programme list and lets you review, edit or
delete the reservations.
By the reserved time, the programme will be recorded (if the hard disk drive
is connected) or displayed.
Notes:
1. If the channel is locked, restricted by watching time, you will be prompted
to enter your password to complete the reservation. The default password
is 0000. If you have forgotten your password, please contact your local TV
distributor.
2. The recording is available only when the hard disk drive has been connected
to the TV.
English-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 >> Using the Electronic Programme Guide (EPG)
Viewing Reserved Programme
You can add or edit the reservation using the Schedule screen.
Press the EPG button.
Press the YELLOW button.
1
2
Schedule
Note: For more information abaout how to add or edit a reservation, refer to
Chapter 11. Recording and Playback > Recording Schedule.
Select
Delete
Reserve
Sort
Edit
Finding a Programme
<RXꢀFDQꢀVXI¿FLHQWO\ꢀ¿QGꢀWKHꢀSURJUDPPHꢀ\RXꢀZDQWꢀE\ꢀSURJUDPPHꢀQDPHꢀRUꢀJHQUHꢁ
Press the EPG button.
Press the BLUE button.
1
2
Find Programme by Name
Keyword
3
Enter the programme name directly using the keyboard displayed on the
screen.
4
When entering programme name is complete, select Find and press the OK
button.
Notes:
Find
By Genre
Previous
Next
1.ꢀ6HOHFWꢀWKHꢀOHWWHUꢀXVLQJꢀWKHꢀŸꢆźꢆŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button to enter
the programme name on the keyboard screen.
Return to Programme Guide
2. If you select Previous or Next on the keyboard displayed on the screen and
press the OK button, the keyboard layout is switched.
Find Programme by Genre
5
6
7
Select By Genre and press the OK button to search programme by genre.
6HOHFWꢀWKHꢀJHQUHꢀXVLQJꢀWKHꢀŸꢆźꢆŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
If you select a programme from Found Programme List screen and press
the OK button, you can watch the programme if it is on air. If you want to
¿QGꢀDQRWKHUꢀSURJUDPPHVꢄꢀSUHVVꢀWKHꢀBACK button to return to the previous
menu.
Return to Programme Guide
Notes:
1. Found Programme List may differ depending on the provided programme
information.
2. Each time you press the OPT+ button, the sorting order of the found
programmes change in the following sequence: by channel, by descending or
ascending time.
Found Programme List
Genre: Movie
Total : 27
English-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Scanning Analog Channels Automatically
You can automatically scan channels for the frequency ranges available
(availability depends on your region).
Analog channels can be scanned only in Analog TV input mode. Please make
sure the main Input is set to Analog TV using the TV/AV button.
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
1
2
3
4
5
Press the MENU button.
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select CountryꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Move
Enter
6HOHFWꢀWKHꢀFRXQWU\ꢀZKHUHꢀ\RXꢀDUHꢀQRZꢀORFDWHGꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
> > A u t o S e a r c h
Select Auto SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Search is highlighted.
Search
6
7
Press the OK button to start to scan channels.It starts to scan channels.
The scanned channels are automatically saved in order. To stop scanning
channels, press the BACK button.
Analog Channel Found
Scan Progress
30
80%
After the channel scanning completes, press the BACK button to exit
VHDUFKꢁꢀ7KHꢀ¿ꢀUVWꢀVFDQQHGꢀFKDQQHOꢄꢀLIꢀRQO\ꢄꢀZLOOꢀEHꢀDXWRPDWLFDOO\ꢀGLVSOD\HGꢁ
Stop
Scanning Analog Channels Manually
You can save each channel as you identify.
Analog channels can be scanned only in Analog TV input mode. Please make
sure the main Input is set to Analog TV using TV/AV button.
1
2
3
Press the MENU button.
>
C h a n n e l
Country
Auto Search
Manual Search
Edit Channels
UK
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select Manual SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Colour System is highlighted.
4
Select the required broadcasting standard (Auto, PAL, or SECAM) using the
ŻꢆŹꢀEXWWRQꢁ
Move
Enter
5
6
7
8
Select Audio SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
> > M a n u a l S e a r c h
Colour System
Audio System
Band
Channel
Programme No
Name
Search
Fine Tune
Save
Auto
BG
VHF/UHF
12
Select the required audio system (BG, I, DK or LꢃꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Select BandꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
99
C14
Select the required signal source (VHF/UHF or CableꢃꢀXVLQJꢀWKHꢀŻꢆŹꢀ
button.
ُٙ
0
Select
Move
9
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀFKRRVHꢀWKHꢀFKDQQHOꢀQXPEHUꢀ
SUHVVLQJꢀWKHꢀŻꢆŹꢀRUꢀNUMBER (0~9) button.
English-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
10 Select Programme NoꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀVHOHFWꢀWKHꢀSURJUDPPHꢀ
QXPEHUꢀ\RXꢀZRXOGꢀOLNHꢀWRꢀDVVLJQꢀE\ꢀSUHVVLQJꢀWKHꢀŻꢆŹꢀRUꢀNUMBER (0~9)
button. To change channel names, select NameꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
11 (QWHUꢀWKHꢀQHZꢀFKDQQHOꢀQDPHꢀXVLQJꢀWKHꢀŸꢆźꢆŻꢆŹꢀEXWWRQVꢀDQGꢀSUHVVꢀWKHꢀOK
button.
12 Select SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀVWDUWꢀ
searching channels.
13 Select Fine TuneꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀREWDLQꢀ
a good quality of the picture and sound until you reach the optimal setting.
14 Select Save and press the OK button to save.
Channel mode display
ꢀ C (Air channel mode): You can select channels by entering the
assigned number for broadcasting stations on air in this mode.
ꢀ S (Cable channel mode): You can select a channel by entering the
assigned number for cable channels in this mode.
English-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Editing Analog Channels
After channel scanning completes, you can delete, skip, move or add into
favorite channel group the saved analog channels.
Analog channels are editable only in Analog TV input mode. Please make sure
the main Input is set to Analog TV using TV/AV button.
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
1
2
3
Press the MENU button.
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select Edit ChannelsꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
The Edit Channels menu will appear.
Move
Enter
> > E d i t C h a n n e l s
Deleting Channels
P
P
P
P
P
P
P
P
P
95 -----
96 -----
97 -----
98 -----
99 -----
01 -----
02 -----
03 -----
04 -----
You can delete channels from the list.
1
6HOHFWꢀDꢀFKDQQHOꢀ\RXꢀZDQWꢀWRꢀGHOHWHꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
RED button. The selected channel is deleted.
Skip
Fav
Move
Delete
Skipping Channels
Once channels are selected to skip, you can select the skipped channels using
number buttons only. The P+/- buttons will not function for the skipped channels.
1
6HOHFWꢀDꢀFKDQQHOꢀWRꢀVNLSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀGREEN
button. ( ) mark appears next to the channel name. To clear the skipped
channels, select the channel you don’t want to skip and press the GREEN
button.
Adding Favourite Channels
You can add favourite channels into the favourite channel group.
1
6HOHFWꢀDꢀFKDQQHOꢀWRꢀDGGꢀLQWRꢀWKHꢀIDYRXULWHꢀFKDQQHOꢀJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀ
button and press the YELLOW button. ( F ) mark appears next to the channel
name. To delete the favourite channels from the group, select a favourite
channel you want to delete and press the YELLOW button.
If you press the FAV button, each favourite channel can be selected in
sequent order.
Moving Channels
You can change the location of channels.
1
2
6HOHFWꢀDꢀFKDQQHOꢀWRꢀPRYHꢀWKHꢀORFDWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
BLUE button. ( ) mark appears next to the channel name.
0RYHꢀWKHꢀVHOHFWLRQꢀWRꢀDꢀQHZꢀORFDWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
BLUE button. The selected channel is moved to its new location and all
other channels are shifted accordingly.
English-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Scanning Digital Channels Automatically
You can automatically scan digital channels for the frequency ranges available
(availability depends on your region).
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
Digital channels can be scanned only in Digital TV input mode. Please make
sure the Main Input is set to Digital TV using the TV/AV button.
1
2
3
4
5
6
Press the MENU button
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Enter your password by pressing the NUMBER(0~9) buttons.
Select CountryꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Move
Enter
Automatic Search
Found Channels
6HOHFWꢀWKHꢀFRXQWU\ꢀZKHUHꢀ\RXꢀDUHꢀQRZꢀORFDWHGꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Select Auto SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Search is highlighted.
Stop
7
8
Press the OK button to start searching channels. It starts to scan channels.
To stop scanning channels, press the OK button.
Progressing
After the channel scanning completes, select SaveꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀ
and press the OK button to save the founded channels.
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
English-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Scanning Digital Channels Manually
You can manually select to scan digital channels. The channel numbers are
determined by the broadcasting stations.
Digital channels can be scanned only in Digital TV input mode. Please make
sure the Main Input is set to Digital TV using the TV/AV button.
1
2
3
4
5
6
Press the MENU button.
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Enter your password by pressing the NUMBER(0~9) buttons.
Select Manual SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Move
Enter
6HOHFWꢀRQHꢀRIꢀFKDQQHOꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button. When
entering the channel number, the appropriate frequency value is automatically
displayed in Frequency.
Manual Search
Channel
123
2000
Frequency
7
8
Select FrequencyꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Network Search
Disable
Enter your desired frequency to search directly using the NUMBER (0~9)
button and press the OK button.
When entering the frequency, the appropriate channel for the entered frequency
is automatically displayed in Channel.
Search
Strength (50%)
Quality (75%)
Select or set the option
9
Select Network SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
10 Select one option between Enable and Disable using the OKꢀRUꢀŹꢀEXWWRQꢁꢀ
,IꢀVSHFL¿ꢀHGꢀIUHTXHQF\ꢀFKDQQHOꢀLQIRUPDWLRQꢀDQGꢀRWKHUꢀFKDQQHOꢀLQIRUPDWLRQꢀDUHꢀ
provided together, the channel, which belongs to other frequency channel, is also
searched.
11 When completed, select SearchꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
OK button to start searching channels. It starts to scan channels. To stop
scanning channels, press the OK button.
12 After the channel scanning completes, select SaveꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀ
and press the OK button to save the founded channels.
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
English-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Editing Digital Channels
After channel scanning completes, you can delete, lock, and rename saved
digital channels. If there is no LCN channel, the function of move is activated.
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
Digital channels can be scanned only in Digital TV input mode. Please make
sure the Main Input is set to Digital TV using the TV/AV button.
1
2
3
4
5
Press the MENU button.
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Enter your password by pressing the NUMBER(0~9) buttons.
Select Edit ChannelsꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Select Edit ChannelsꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHss the OKꢀRUꢀŹꢀEXWWRQ.
Move
Enter
> > E d i t C h a n n e l s
Edit Channels
Edit Fav Chanls
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
Move
Enter
Selecting Channel Group
Edit Channel Lists
You can select the channel list group to edit TV or Radio.
Group
1
2
Press the OKꢀRUꢀŹꢀEXWWRQꢀLQꢀGroup to display channel list group.
6HOHFWꢀ\RXUꢀGHVLUHGꢀFKDQQHOꢀOLVWꢀJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀ
OK button.
Lock
Select All
Unselect All
Delete
You may select one among channel groups.
Deleting Channels
You can delete one or more channels.
1
2
6HOHFWꢀDꢀFKDQQHOꢀ\RXꢀZDQWꢀWRꢀGHOHWHꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK
button. You can select multiple channels.
Select DeleteꢀLQꢀWKHꢀULJKWꢀXVLQJꢀWKHꢀŸꢆźꢆŻꢆŹꢀEXWWRQVꢄꢀDQGꢀSUHVVꢀWKHꢀOK
button.
English-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Locking/Unlocking Channels
You can lock or unlock one or more channels.
1
2
6HOHFWꢀDꢀFKDQQHOꢀ\RXꢀZDQWꢀWRꢀORFNꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK
button. You can select multiple channels.
Select LockꢀLQꢀWKHꢀULJKWꢀXVLQJꢀWKHꢀŸꢆźꢆŻꢆŹꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOK
button. ( ) mark appears next to the channel name.
To unlock the locked channels, select the channel you want to unlock and select
Unlock in the right, and press the OK button.
Note: To watch the locked channels, you must enter the password using the
NUMBER (0-9) buttons.
Selecting/Unselecting All Channels
You can select/unselect all channels at a time.
1
2
Select Select All in the right and press the OK button to select all channels.
Select Unselect All in the right and press the OK button to unselect all the
selected channels.
English-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Editing Favourite Digital Channels
You can add favourite channels or remove favourite channels from the favourite
list.
>
C h a n n e l
Country
UK
Auto Search
Manual Search
Edit Channels
Digital channels are editable only in Digital TV input mode. Please make sure
the Main Input is set to Digital TV using TV/AV button.
1
2
3
4
5
Press the MENU button.
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Enter your password by pressing the NUMBER(0~9) buttons.
Select Edit ChannelsꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Move
Enter
> > E d i t C h a n n e l s
Edit Channels
Edit Fav Chanls
Select Edit Fav ChanlsꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
Move
Enter
The buttons for editing the Favourite channel list are described in the following
table.
Edit Favourite Channels
Add
Adds the favourite channel
Remove
TV/Radio
Fav.Group
Move
Removes the channel from the favourite channel list
Switches between TV and Radio channel list
Changes the favourite channel group
If you want to select / rekease, press
.
Moves the order of channel list within the favourite channel list
Renames the favourite channel group
Rename
Sort
Sorts channels by number or name in all TV/Radio channel list
Unselect All Unselect all the selected channels
Adding/Removing favourite channels
You can add favourite channel(s) to the favourite channel list or remove the
added favourite channel(s) from the list.
1
2
Select a favourite group using
.
Select your desired channel(s) in all TV/Radio channel list, and press
add in the favourite channel list.
to
3
Select your desired channel(s) in favourite channel list, and press
remove in the favourite channel list.
to
English-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 >> Setting Channels
Moving favourite channels
You can move favourite channel(s) to your desired location within the favourite
channel list.
1
2
Select a favourite group using
.
Select your desired channel to move within the favourite channel list and
press the OK button.
3
4
Select
, and press the OK button.
0RYHꢀWKHꢀFXUVRUꢀWRꢀ\RXUꢀGHVLUHGꢀORFDWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀ
the OK button.
5
The selected channel(s) is moved into the desired location you selected.
Renaming favourite groups
You can rename the favourite groups.
1
2
3
Select a favourite group to rename using
Select , and press the OK button.
.
(QWHUꢀWKHꢀQHZꢀJURXSꢀQDPHꢀXVLQJꢀŸꢆźŻꢆŹꢀEXWWRQꢀLQꢀWKHꢀNH\ERDUGꢀGLVSOD\HGꢀ
on the screen.
4
:KHQꢀ¿QLVKLQJꢀHQWHULQJꢀWKHꢀQDPHꢄꢀVHOHFWꢀOK and press the OK button.
Additional Features
Additional Features provides many useful functions which are necessary to add
favourite channel.
Change between TV and Radio channel list
You can add not only TV channel(s) but also Radio channel(s) to the favourite
channel list. Press
to switch all channels into TV or Radio channels.
Select a favourite channel group
You can select your desired favourite channel list to edit. Press
to display
WKHꢀIDYRXULWHꢀJURXSꢀOLVWꢁꢀ7KHQꢀVHOHFWꢀ\RXUꢀGHVLUHGꢀJURXSꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀ
and press the OK button.
Sort a channel list
You can sort all TV or Radio channel lists by channel number or name for easy
channel search. If channel lists are sorted by channel number,
is displayed.
When you press this button, all the channel lists are sorted by name. Or, if
channel lists are sorted by channel name,
button to order channels by number.
is switched into
. Press this
Unselect all the selected channels
Press
button to unselect all the selected channels.
English-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 >> Setting the Picture
Selecting a Picture Mode
<RXꢀFDQꢀVHOHFWꢀWKHꢀSLFWXUHꢀPRGHꢀZKLFKꢀEHVWꢀ¿ꢀWVꢀ\RXUꢀYLHZLQJꢀUHTXLUHPHQWVꢁ
1
2
3
Press the MENU button.
>
P i c t u r e
Mode
Brightness
Contrast
Sharpness
Colour
Fleshtone
Colour Temp.
Backlight
Standard
60
75
50
60
Off
Select PictureꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
6HOHFWꢀWKHꢀUHTXLUHGꢀSLFWXUHꢀPRGHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The following options are available:
High
ꢀ Standard
Shows the optimal sharpness of the picture if viewed in a well-lighted
room.
Move
Select
ꢀ Dynamic
Increases the clarity and sharpness of the picture.
ꢀ Movie
Select Movie to lessen eye strain when watching a movie in a dark
place.
ꢀ Mild
Softens display with moderate sharpness of the picture.
ꢀ User
Select User to set detailed options such as Brightness, Contrast, and
Colour so on.
Note: You can select a picture mode by simply pressing the PIC MODE
button on the remote control. Press again to switch.
4
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Customizing the Picture Settings
You can adjust the picture appearance to suit your preference and viewing
situations.
1
2
3
Press the MENU button.
>
P i c t u r e
Mode
Brightness
Contrast
Sharpness
Colour
Fleshtone
Colour Temp.
Backlight
Standard
60
75
50
60
Off
Select PictureꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
6HOHFWꢀWKHꢀUHTXLUHGꢀRSWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The following options are available:
Brightness > Contrast > Sharpness > Colour
High
Move
Adjust
4
5
3UHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀXQWLOꢀ\RXꢀUHDFKꢀWKHꢀRSWLPDOꢀVHWWLQJꢁꢀ
To select other options, repeat the steps from 3 to 4.
Brightness
50
Press EXIT button to return to Live TV or press the BACK button to return to
the previous menu.
Note: If you make any changes to the options, the picture mode is automatically
switched to User. The Sharpness and Colour are not available in the PC input
mode.
English-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 >> Setting the Picture
Fleshtone
Use Fleshtone function to improve the picture quality by adjusting colour
balance.
1
2
3
4
Press the MENU button.
>
P i c t u r e
Mode
Brightness
Contrast
Sharpness
Colour
Fleshtone
Colour Temp.
Backlight
Standard
60
75
50
60
Off
Select PictureꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select FleshtoneꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁꢀ
6HOHFWꢀWKHꢀUHTXLUHGꢀÀꢀHVKWRQHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The following options are available.
Off > Low > Medium > High
High
Move
Select
5
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Colour Temperature
<RXꢀFDQꢀFKDQJHꢀWKHꢀFRORXUꢀRIꢀWKHꢀHQWLUHꢀVFUHHQꢀWRꢀ¿ꢀWꢀ\RXUꢀQHHGVꢁ
Set to WarmꢀIRUꢀLQWHQVL¿ꢀQJꢀKRWꢀFRORXUVꢀVXFKꢀDVꢀUHGꢄꢀRUꢀVHWꢀWRꢀCool for displaying
less intense colours with more blue.
1
2
3
4
Press the MENU button.
> > C o l o u r Te m p e r a t u r e
Colour Temp.
Red
Green
Normal
45
Select PictureꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select Colour Temp.ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
50
50
Blue
6HOHFWꢀWKHꢀUHTXLUHGꢀFRORXUꢀWHPSHUDWXUHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The following options are available:
Normal > Cool > User > Warm
Move
Select
5
6
To customise the colour temperature, select the required option using the
ŸꢆźꢀEXWWRQꢁꢀ
> > C o l o u r Te m p e r a t u r e
Colour Temp.
Red
Green
Normal
45
The following options are available to make changes:
50
50
Red > Green > Blue
Blue
3UHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀXQWLOꢀ\RXꢀUHDFKꢀWKHꢀRSWLPDOꢀVHWWLQJꢁꢀ7RꢀVHOHFWꢀRWKHUꢀ
RSWLRQVꢄꢀSUHVVꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Move
Adjust
Note: If you make any changes to the options, the colour temperature mode is
automatically switched to User.
7
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
English-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 >> Setting the Picture
Adjusting Backlight Brightness
You can adjust the brightness of Liquid Crystal Display (LCD).
1
2
3
4
Press the MENU button.
>
P i c t u r e
Mode
Brightness
Contrast
Sharpness
Colour
Fleshtone
Colour Temp.
Backlight
Standard
60
75
50
60
Off
Select PictureꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select BacklightꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
6HOHFWꢀWKHꢀUHTXLUHGꢀRSWLRQꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The following options are available:
High
Move
High > Low > Medium
Select
5
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
English-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 >> Setting the Sound
Setting the Sound Effect
You can select the type of special sound effect when watching a broadcast.
Sound Effect lets you enjoy the best sound without any special adjustment
because the TV sets the appropriate sound options based on the programme
content.
1
2
3
4
Press the MENU button.
>
S o u n d
Effect
Flat
0
On
Off
Balance
AVL
SRS TruSurround
Select SoundꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select EffectꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
6HOHFWꢀWKHꢀUHTXLUHGꢀVRXQGꢀHIIHFWꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
The following options are available:
ꢀ User
Move
Enter
Customise your own sound effect.
ꢀ Flat
> > S o u n d E f f e c t
Flat and pure sound.
ꢀ Speech
Effect
Flat
Emphasises clear dialogue.
ꢀ Movie
Emphasises bass tones.
ꢀ Music
Enhances music quility.
Adjuat
Move
5
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Note: You can select sound effect by simply pressing the SND EFFECT button
on the remote control. Press again to switch.
Adjusting the Sound Balance
You can adjust the output of the right and left speakers to obtain the best stereo
reproduction for your listening position.
1
2
3
4
5
Press the MENU button.
>
S o u n d
Effect
Flat
0
On
Off
Balance
AVL
SRS TruSurround
Select SoundꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select BalanceꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁꢀ
3UHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀPDNHꢀFKDQJHVꢁ
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Move
Adjust
English-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 >> Setting the Sound
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, volume may not be
adjusted each time you switch channels. This feature lets you automatically
adjust the volume of the selected channel by adjusting the sound output
depending on the signal modulation.
1
2
3
4
5
Press the MENU button.
>
S o u n d
Effect
Flat
0
On
Off
Select SoundꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select AVL(Auto Volume Level)ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁꢀ
Select On/OffꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Balance
AVL
SRS TruSurround
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Move
Select
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1multi-channel content over two speakers. TruSurround delivers a
compelling, virtual surround sound effect through two-speaker playback system,
including built-in television speakers. It is fully compatible with all multi-channel
audio formats.
1
2
3
4
5
Press the MENU button.
>
S o u n d
Effect
Balance
AVL
Flat
0
On
Off
Select SoundꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select SRS TruSurrondꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Select On/OffꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
SRS TruSurround
Press the EXIT button to return to Live TV or press the BACK button to
return to the previous menu.
Move
Select
Note: (
) is a trademark of SRS Labs, Inc. TruSurround XT technology is
incorporated under license from SRS Labs, Inc.
English-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 >> Setting the System
Setting the Time Information
You can set the current time. If you want to set time for automatically turning
>
S y s t e m
RQꢆRIIꢀWKHꢀSRZHUꢄꢀ\RXꢀPXVWꢀVHWꢀWKHꢀORFDOꢀWLPHꢀ¿ꢀUVWꢁ
Language
English
Time Setting
Change Password
CI
Setting the Current Time
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
Disable
Disable
1
2
3
4
Press the MENU button.
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select Time SettingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Move
Enter
> > T i m e S e t t i n g
Date
19.03.2007
Select DateꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀHQWHUꢀGD\ꢆPRQWKꢆ\HDUꢀXVLQJꢀWKHꢀ
NUMBER(0~9) buttons.
Local Time
GMT Offset
Snooze
10
GMT+00
:
:
00
00
Off
Off
T V
Power On Time
5
Select Local TimeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀHQWHUꢀKRXUꢆPLQXWHꢀXVLQJꢀWKHꢀ
NUMBER(0~9) buttons.
--
:
--
Power Off Time
Auto Power Off
Move
Off
--
:
--
Off
Note: Your TV automatically sets and updates the time over the air when you
successfully search digital terrestrial channels. Then Date and Local Time
menu will be disabled. You must set the GMT Off set value in System > Time
Setting > GMT Offset menu.
Select
Using the TV Timer Function
You can schedule time for automatically turning on/off the power so that your TV
ZLOOꢀDXWRPDWLFDOO\ꢀEHꢀWXUQHGꢀRQꢀDQGꢀRIIꢀDWꢀVSHFL¿ꢀFꢀWLPHꢀ\RXꢀKDYHꢀVFKHGXOHGꢁ
6
To set time for turning on the power, select Power On TimeꢀXVLQJꢀWKHꢀŸꢆźꢀ
EXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀVHOHFWꢀOn.
> > T i m e S e t t i n g
Date
19.03.2007
Local Time
GMT Offset
Snooze
10
GMT+00
:
:
00
00
7
Power On Time is enabled, enter hour/minute using the NUMBER(0~9)
buttons. And select your desired service between TV or Radio using the
ŻꢆŹꢀEXWWRQꢁꢀ$WꢀWKHꢀSUHVHWꢀWLPHꢄꢀWKHꢀ79ꢀZLOOꢀDXWRPDWLFDOO\ꢀEHꢀWXUQHGꢀRQꢀDQGꢀ
display the preset service.
Off
Off
T V
Power On Time
--
:
--
Power Off Time
Auto Power Off
Move
Off
--
:
--
Off
8
9
To switch into the standby mode momentarily when the TV is turned on
automatically at the preset time, select SnoozeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀ
SUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀVHOHFW On. Then, within 10 minutes after the TV
is turned on automatically at the preset time, if you press the STANDBY
button, the TV is switched to the standby mode and will be worked again
after 5 minutes.
Select
To set time for turning off the power, select Power Off TimeꢀXVLQJꢀWKHꢀŸꢆźꢀ
EXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀVHOHFWꢀOn.
10 Power Off Time is enabled, enter hour/minute using the NUMBER(0~9)
buttons.
> > T i m e S e t t i n g
Date
19.03.2007
Local Time
GMT Offset
Snooze
10
GMT+00
:
:
00
00
Off
Off
T V
Off
--
Off
Setting the Auto Power Off
In case there is no signal, it is possible have your TV automatically turned off to
reduce power consumption.
Power On Time
--
:
--
Power Off Time
Auto Power Off
Move
--
:
11 Select Auto Power OffꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀ
select On. The TV will automatically be turned off if there is no signal.
Select
English-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 >> Setting the System
Changing the Password
You can change the current password to a new one.
>
S y s t e m
Language
English
1
2
Press the MENU button.
Time Setting
Change Password
CI
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
3
4
5
Select Change PasswordꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Disable
Disable
Move
Enter
Enter your old password and enter your new password using the NUMBER
(0~9) buttons.
N o t i c e
Enter Your New Password
(QWHUꢀWKHꢀQHZꢀSDVVZRUGꢀDJDLQꢀWRꢀFRQ¿ꢀUPꢁꢀ7KHQꢀ\RXUꢀQHZꢀSDVVZRUGꢀKDVꢀ
been memorized.
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
(for digital channels only)
Common Interface
You can view the current status of the CI module. The CI sub menu displays
when inserting the CI module to the TV.
>
S y s t e m
Language
English
Time Setting
Change Password
CI
1
2
Press the MENU button.
PC
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
DT V Setup
Panel Off
VFD Clock
Default Setting
Disable
Disable
3
Select CIꢂ&RPPRQꢀ,QWHUIDFHꢃꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Move
Enter
4
If Common Interface is available, you can view information about each Slot.
Note: The displayed information about each Common Interface may differ
depending on the type of Common Interface.
Panel Off
You can set the LCD panel to go out automatically for reduction of power
consumption when watching a radio channel.
>
S y s t e m
Language
Time Setting
English
Change Password
CI
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
1
2
3
4
Press the MENU button.
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select Panel OffꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Enable
Disable
Select EnableꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
The LCD panel will automatically go out if there is no signal for 1 minute
when watching a radio channel.
Move
Select
Note: When you are watching a radio channel or playing the radio programme/
03ꢇꢀ¿ꢀOHꢄꢀLIꢀWKHꢀPanel Off function is Enable, the LCD panel goes out and the
VFD displays the information such as channel number, channel name, sound
effect and volume. You can adjust those displayed on VFD.
English-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 >> Setting the System
VFD Clock
You can set to display the current time on VFD in standby mode.
>
S y s t e m
Language
English
1
2
3
4
Press the MENU button.
Time Setting
Change Password
CI
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select VFD ClockꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
Disable
Enable
Select EnableꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
In standby mode, the VFD will display the current time.
Move
Select
Note: If the Power On Time function is enabled, the clock icon on VFD will be
enabled.
Default Settings
You can set your TV settings to the default setting values.
Warning: Please note that once you perform the Default Setting, all data such
DVꢀDHULDOꢀVHWWLQJꢀLQIRUPDWLRQꢁꢀFKDQQHOꢀOLVWꢁꢀDQGꢀXVHUꢀFRQ¿ꢀJXUHGꢀGDWDꢀDUHꢀGHOHWHGꢂ
To perform Default Setting, do as follows:
1
2
3
Press the MENU button.
>
S y s t e m
Language
English
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Time Setting
Change Password
CI
Select Default SettingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
The Enter Your Password dialog box is displayed.
PC
DT V Setup
Panel Off
VFD Clock
Default Setting
Disable
Disable
4
5
Enter your password using the NUMBER(0~9) buttons to change all settings
value to the factory default.
Move
Enter
Default setting is completed.
Notes :
1. The default password is 0000. If you have forgotten your password, please
contact your local TV distributor.
2. After completing the default setting, the initial setup wizard will appear
automatically in a few seconds.
English-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
In this chapter, you can set the various options for digital channels such as the
subtitle language, i-plate display time and software update.
You can access to the DTV Setup menu only in Digital TV input mode.
Parental Control
1
2
3
4
5
Press the MENU button.
> > D T V S e t u p
Parental Ctrl.
Language Setup
Miscellaneous
Sofware Update
Signal Strength
Status
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Select Parental Ctrl.ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ
Enter your password by pressing the NUMBER(0~9) buttons.
Move
Enter
Note: The default password is 0000. If you have forgotten your password,
please contact your local TV distributor.
Parental Control
&HQVRUVKLSꢀ&ODVVL¿ꢀFDWLRQ
View all
View all
&HQVRUVKLSꢀ&ODVVL¿ꢀFDWLRQ
&HQVRUVKLSꢀ&ODVVL¿ꢀFDWLRQꢀDOORZVꢀ\RXꢀWRꢀEORFNꢀSURJUDPPHVꢀDFFRUGLQJꢀWRꢀWKHꢀDJHꢀ
level you have set.
1
2
Select &HQVRUVKLSꢀ&ODVVL¿ꢀFDWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKH OK
Select or set the option
RUꢀŹꢀEXWWRQꢁ
6HOHFWꢀWKHꢀUHTXLUHGꢀDJHꢀOHYHOꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK
button.
Notes:
1. You have to enter the password to watch the programme which is blocked by
the age level.
2. The default password is 0000. If you have forgotten the password, please
contact your local product distributor.
English-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
Language Setting
1
2
3
4
Press the MENU button.
> > D T V S e t u p
Parental Ctrl.
Language Setup
Miscellaneous
Sofware Update
Signal Strength
Status
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Select Language SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Move
Enter
Audio/Subtitle Language
You can set the language for Audio and Subtitle.
Language Setup
1
Select one among Audio Language or Subtitle LanguageꢀXVLQJꢀWKHꢀŸꢆźꢀ
button.
Audio Language
Subtitle Language
Subtitle Display
Subtitle Font
English
English
Manual
Variable
2
3
Press the OKꢀRUꢀŹꢀEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀDYDLODEOHꢀODQJXDJHꢀOLVWꢁ
6HOHFWꢀ\RXUꢀGHVLUHGꢀODQJXDJHꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOK
button.
Language selection for audio
Subtitle Display
You can select whether or not to display the Subtitle automatically if provided.
1
2
Select Subtitle DisplayꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Select your desired option using the OKꢀRUꢀŹꢀEXWWRQꢁ
Auto
6XEWLWOHVꢀDUHꢀGLVSOD\HGꢀDXWRPDWLFDOO\ꢀLQꢀWKHꢀSUHGH¿ꢀQHGꢀVXEWLWOHꢀ
language.
Manual Subtitles are displayed in the language when you select the subtitle
language by pressing the SUBTITLE button at remote controller.
Subtitle Font
You can select the Subtitle font.
1
2
Select Subtitle FontꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Select your desired option using the OKꢀRUꢀŹꢀEXWWRQꢁ
Variable Uses the horizontally variable Subtitle Font.
Fixedꢀ 8VHVꢀWKHꢀ¿ꢀ[HGꢀ6XEWLWOHꢀ)RQWꢁ
English-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
Miscellaneous Settings
1
Press the MENU button.
> > D T V S e t u p
Parental Ctrl.
Language Setup
Miscellaneous
Sofware Update
Signal Strength
Status
2
3
4
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Select Miscellaneous XVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Move
Enter
i-Plate Display Time
You can set the duration during which the Information box is to be automatically
displayed when you switch the channel.
Miscellaneous
5 sec
25%
Display Time
OSD Transparency
Option in CH List
Instant replay time
Commercil skip time
1
Select i-Plate Display TimeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Dff
7 sec
30 sec
2
6HOHFWꢀDꢀYDOXHꢀEHWZHHQꢀꢊꢀaꢀꢉꢈꢀVHFRQGVꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀ
the OK button.
Note: When it is set to Disable, the i-Plate will not be displayed when you switch
the channel.
Information box display time
OSD Transparency
You can set the transparency of On Screen Display.
1
Select OSD TransparencyꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
2
Select an option among Disable, 25, 50 and 75ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀ
press the OK button.
Disable
Fully opaque screen
25, 50, 75
The bigger the number, the more transparent the screen.
Option in Channel List
You can set whether or not to display the scrambled icon in channel list.
1
2
Select the Option in CH ListꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
Select one option from On/Off using the OKꢀRUꢀŹꢀEXWWRQꢁ
On Scramble icon display in the channel list.
Off Scramble icon disappear in the channel list.
Instant Replay Time
You can make the current programme go back 7, 15 or 30 seconds.
1
Select Instant replay timeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
2
Select an option among 7, 15 and 30ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
OK button.
English-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
Commercial Skip Time
You can skip 15, 30 or 60 seconds of the unwanted scenes.
1
Select Commercial skip timeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
2
Select an option among 15, 30 and 60ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀ
OK button.
Software Update
In order to maintain proper performance of the TV, it is essential to have the
most up-to-date software. The latest news and release of software versions
recommended that you periodically check for the availability of software update.
OTA (Over the Air)
OTA, an abbreviation of Over–the-Air, means that the software can be
downloaded through your aerial. The manufacturer reserves the right to decide
when and where to release software by this process. The software update via
your aerial will only occur under the following circumstances.
1
The equipment should have appropriate loader software.
Caution: Please note that if you don’t have normal loader software, the
equipment may not be updated or work after software update.
2
3
4
The manufacturer decides to release software downloading via a designated
aerial system.
The equipment must be tuned properly according to the guidelines within
this manual.
Update software when the quality of receiving signal strength is high. If the
weather is not so good that the quality of receiving signal strength is not
recommendable, perform the software update later.
Caution:
• Please be careful to keep the power on and the power cord plugged in
during software update. If the power is disconnected during software
update, it may cause fatal damage to the TV.
• Please be careful not to pull out the signal line (co-axial Cable) during
software update. Update may be interrupted and the TV may not work.
Notes:
1. The other functions of TV cannot work at all during software update.
2. It may take 5 ~10 minutes to update software.
3. Scheduling operation cannot work during software update.
English-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
If new software is found when powering on
A message will be displayed to notify that new software is found.
Select Yes and press the OK button to update the software.
1
2
3
Starts downloading new software. Please wait until the updated is
completed.
4
When completing the software update, the equipment is automatically
powered off and on again.
If updating software from Menu
1
2
3
4
Press the MENU button.
> > D T V S e t u p
Parental Ctrl.
Language Setup
Miscellaneous
Sofware Update
Signal Strength
Status
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Select Software UpdateꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Move
Enter
Automatic Update
<RXꢀFDQꢀVHWꢀWKHꢀ79ꢀWRꢀ¿ꢀQGꢀ+80$;ꢀVRIWZDUHꢀXSGDWHꢀVLWHꢀDQGꢀXSGDWHꢀVRIWZDUHꢀ
automatically.
Software Update
Automatic Update
Manual Update
1
2
3
Select Automatic UpdateꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button. Automatically search for new software.
Information
Now searching a new software...
Cancle
When detecting update software, the following result is displayed. If new
software is not found by Automatic Update, use Manual Update.
Select Yes and press the OK button to start updating. Select No and press
the OK button to return to the previous menu without updating.
Move to the selected submenu
4
5
Performs Software Update. Please wait until it is completed.
When completing the software update, the TV is automatically powered off
and on again.
Software Update
Automatic Update
Software Update
Current Version
New Version
LGB-19/22DRT 0.90.10
LGB-19/22DRT 0.90.15
New System Software is available.
Do you want to upgrade it now?
No
Yes
Move to the selected submenu
English-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
Manual Update
You can perform Manual Update only if you know MUX information of software
update correctly.
Manual Update
Channel
502000
708000
Frequency
1
Select Manual UpdateꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
2
3
Select ChannelꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Search
6HOHFWꢀWKHꢀFKDQQHOꢀꢀQXPEHUꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Strength (50%)
Quality (75%)
Select or set the option
4
5
Select FrequencyꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Enter the frequency using the NUMBER (0~9) buttons.
Manual Update
Channel
6
7
Select Search and press the OK button to search software.
Software Update
It is displayed whether or not New Software exist. If new software does not
exist, press the OK button to return to the Manual Update menu.
Current Version
New Version
LGB-19/22DRT 0.90.10
LGB-19/22DRT 0.90.15
New System Software is available.
Do you want to upgrade it now?
8
9
Select Yes and press the OK button to start updating. Select No and press
the OK button to return to the previous menu.
No
Yes
Performs Software Update. Please wait until it is completed.
Select or set the option
10 When completing the software update, the TV is automatically powered off
and on again.
S/W Update from PC
You can connect your TV to the PC directly and update your software by
transferring the new software from the PC. Follow these steps to download new
software from PC to this TV.
1
'RZQORDGꢀQHZꢀVRIWZDUHꢀ¿OHꢀꢂ+')ꢀ¿OHVꢃꢀHTXLYDOHQWꢀIRUꢀWKLVꢀ79ꢀPRGHOꢀIURPꢀRXUꢀ
website into your computer (http://www.humaxdigital.com).
2
3
4
'RZQORDGꢀDQGꢀLQVWDOOꢀGRZQORDGꢀWRROꢀ¿OHꢀIURPꢀRXUꢀZHEVLWHꢀLQWRꢀ\RXUꢀFRPSXWHUꢁ
Connect your PC to this TV with RS-232C serial cable(not supplied).
Execute installed download tool, and then follow the instructions contained
the download tool.
5
Reconnect the power cable of the TV and press the STANDBY button to
make this TV operating.
English-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 >> DTV Setup
Signal Detection
You can view the signal strength and signal quality reception for the channel that
is currently being viewed.
Signal Strength
CH 39 (618000kHz 8k 1/32)
3 ITV1
1
2
3
4
Press the MENU button.
Crystal Palace
ITV
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Strength (50%)
Quality (75%)
Select Signal StrengthꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button.
Signal status display
5
Display information about the aerial and multiplex, which current channel
belongs to and the graphs and percentage of Signal Strength and Quality of
the channel.
Status
You can view System information.
Status
1
2
3
4
5
Press the MENU button.
Hardware Version
Software Version
Loader Version
System ID
LGB-19DRT REV 1.0
LGB-19DRT 1.00.06
a 4.09
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select DTV SetupꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢁ
Select StatusꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢄꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
30200.00001
Update Data
Slot
Aug 10 2007 14:37:22
Empty
&RQ¿UPꢀWKHꢀLQIRUPDWLRQꢀDERXWꢀHardware version, Software version,
Loader version, System ID and Update Date.
English-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
This chapter describes the PVR (Personal Video Recorder) function that allows
you to record a programme in the connected hard disk drive.
You can access to the Recording menu only in Digital TV input mode (if the
hard disk drive is connected to the TV correctly).
Note: You can record the digital TV or radio programmes only. The analog
channels and external AV inputs can’t be recorded.
Time Shifted Recording (TSR)
You can perform TSR (Time Shifted Recording) and other functions similar to
VCR functions using the playback control buttons while playing a programme.
The TV automatically saves the programme in the connected hard disk drive
temporarily, so that users can pause, play, fast rewind, fast forward, replay, etc.
even while watching the currently broadcasting TV programme.
Time Bar
If you press the PLAY button while watching TV, the time bar information will be
displayed. Time bar displays the current operation status, the time gap between
the broadcasting point and watching point and the amount of temporarily saved
programme.
1
2
3
4
5
6
Operation status
Watching point time (hh:mm:ss)
The amount of saved programme
Watching point
Broadcasting (Live) point
Current time (hh:mm)
Pause
If you press the PAUSE button on the remote control, the current programme is
paused. If you press the PAUSE button once again, the programme is resumed
from that point.
Note: Pause makes the time gap or delay between the broadcasting (live) point
and watching point. The time gap is equivalent to the period the programme was
paused. Operations like slow motion and fast rewind also make the time gap.
Press the STOP button to go to the live programme.
English-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Fast Rewind to Previous Scene
Press the FAST REWIND button on the remote control to watch the scene
passed by. Each time you press the FAST REWIND button, the rewind speed
increases. ( x 2, x 4, x 16, x 32, x 64)
If you press the PLAY button, the fast rewind operation stops and the
programme is played at normal speed.
Note: You can fast rewind back to the start point. If you reach the start point
while rewinding, the programme is automatically played at normal speed from
that point.
Fast Forward to the Next Scene
Press the FAST FORWARD button on the remote control to fast forward the
programme. Each time you press the FAST FORWARD button, the speed
increases. ( x 2, x 4, x 16, x 32, x 64)
If you press the PLAY button, the fast forward operation stops and the
programme is played at normal speed.
Note: You can use the fast forward operation only when there is a time gap
between the current watching point and the broadcasting (live) point caused
by some previous operations such as pause, slow motion or fast rewind. You
can fast forward to the current broadcasting point. If the watching point reaches
the broadcasting (live) point, the programme is automatically played at normal
speed.
Recording
Press the RECORD button on the remote control to record the current
programme immediately. While the time shift operation records the programme
temporarily, this record operation records the programme permanently so you
can playback the recorded programme at any time. For more information about
recording, refer to Chapter 11. Recording and Playback > Instant Recording.
Adjusting the Recording End Time
Press the RECORD button while recording to adjust the recording end time.
<RXꢀFDQꢀDGMXVWꢀWKHꢀUHFRUGLQJꢀHQGꢀWLPHꢀE\ꢀꢅꢆꢋꢊꢈꢀPLQXWHVꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢄꢀ
and then press the OK button to change the recording end time and hide the
message screen.
English-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Additional Time Shift Operations
You can perform additional time shift operations using the following buttons on
the remote control.
Direct Jump
Press the PLAYꢀEXWWRQꢀZKLOHꢀZDWFKLQJꢀ79ꢁꢀ,Iꢀ\RXꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢄꢀDꢀ
moving arrow will appear in the progress bar. Move this arrow to a time point
XVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀSOD\ꢀWKHꢀSURJUDPPHꢀIURPꢀWKHꢀVSHFL¿HGꢀWLPHꢀSRLQWꢁ
<RXꢀFDQꢀDOVRꢀPRYHꢀWRꢀWKHꢀVSHFL¿HGꢀWLPHꢀSRLQWꢀGLUHFWO\ꢀE\ꢀHQWHULQJꢀWKHꢀWLPHꢀ
you want using the NUMBER(0-9) buttons while playing back a recorded
programme.
Instant Replay
Press the INSTANT REPLAY button to go back 7 seconds. When the replay has
been completed the programme will play from the current point.
Refer to Chapter 10. DTV Setup > Miscellaneous Settings.
Instant Skipping 30 seconds
Press the INSTANT SKIP button to skip 30 seconds ahead from the current
watching point. You can use the skip operation only when there is a time gap
between the current watching point and the broadcasting point while using the
fast forward operation. If the time gap is less than 30 seconds, the programme is
played from the current broadcasting point. Refer to Chapter 10. DTV Setup >
Miscellaneous Settings.
Slow Motion
Press the SLOW MOTION button to play the current programme in slow motion.
Each time you press the SLOW MOTION button, the speed decreases (x 1/2 ,
x 1/4, x 1/8). Press the PLAY button to stop playing in slow motion and return to
normal speed.
Repeat Mode
<RXꢀFDQꢀVHOHFWꢀDꢀVSHFL¿FꢀEORFNꢀZLWKLQꢀDꢀUHFRUGHGꢀSURJUDPPHꢀDQGꢀSOD\ꢀLWꢀEDFNꢀ
repeatedly. Press the A-BꢀEXWWRQꢀWRꢀVHWꢀWKHꢀ¿UVWꢀUHSHDWLQJꢀSRVLWLRQꢁꢀ6HOHFWꢀWKHꢀ
VHFRQGꢀSRVLWLRQꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁꢀ7KHQꢀWKHꢀSURJUDPPHꢀSOD\VꢀEDFNꢀWKHꢀ
selected block repeatedly. To stop the repeat mode, press the A-B button while
repeating the selected block.
Press the STOP button to stop playing the saved programme and watch the
current programme on air.
English-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Bookmark
You can jump to a position directly using the bookmark in recorded programme
playback. Use bookmark to search positions quickly and easily.
• Adding a bookmark
Press the ADD BOOKMARK button at a certain position to set a bookmark
while playing back a recorded programme.
Note: The bookmark function is only available for recorded programmes.
• Deleting a bookmark
Press the BOOKMARK LIST button after adding a bookmark and select the
ERRNPDUNHGꢀSRVLWLRQꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁꢀ3UHVVꢀWKHꢀADD BOOKMARK
button to delete a bookmark.
Note: Press the BOOKMARK LIST or EXIT button to exit the bookmark list
screen.
• Going to a bookmark
Press the BOOKMARK LIST button. Select the bookmarked position using
WKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button. Then the programme plays from the
bookmarked position.
Instant Recording
Using the connected hard disk drive, you can record a programme without an
external media device such as a VCR.
Start Recording (12:07:04 ¥ 14:00:00)
Press the RECORD button on the remote control to record the current
SURJUDPPHꢀLQVWDQWO\ꢁꢀ<RXꢀFDQꢀVHOHFWꢀWKHꢀSRLQWꢀ\RXꢀZDQWꢀWRꢀUHFRUGꢀXVLQJꢀWKHꢀŻꢆŹꢀ
button. Press the RECORD button to start instant recording from that point.
Recording End Time
Żꢀ
14:00
Ź
You can change the recording end time while recording. Press the RECORD
EXWWRQꢀDQGꢀFKDQJHꢀWKHꢀWLPHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
If a reserved recording is about to start while recording already, you will be
prompted to stop the currently recording channel.
English-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Notes:
1. Make sure that the hard disk drive is connected correctly before recording.
2. During recording, the standby indicator on the front of your TV turns on RED.
3. Ensure that there is enough free space before recording. If the free space on
WKHꢀFRQQHFWHGꢀKDUGꢀGLVNꢀGULYHꢀLVꢀLQVXI¿ꢀFLHQWꢄꢀUHFRUGLQJꢀZLOOꢀVWRSꢁꢀ5HFRUGLQJꢀRQHꢀ
hour of programme may require up to 2 or 3GB of hard disk space. The space
for recording a 1 hour programme may differ depending on the programme.
4. You can record radio programmes also.
Recording Schedule
You can set a programme to record automatically.
>
R e c o r d i n g
Schedule
Playlist
MP3
1
2
3
Press the MENU button.
HDD Control
Select RecordingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select ScheduleꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢀWRꢀ
display the reserved recording list on the screen.
Move
Enter
Note: You can schedule recording easily using the programme guide. Refer to
Chapter 5. Using the Electronic Programme Guide (EPG) > Reserving a
Programme.
Selecting/Unselecting Reserved Programmes
Recording Schedule
1
2
Select a programme and press the GREEN button. You can select multiple
programmes.
To unselect the selected programmes, press the GREEN button again.
Delete
Select
Reserve
Sort
Edit
Deleting Reserved Programmes
Recording Schedule
1
2
After selecting reserved programmes using the GREEN button, press the
RED button.
Notice
Do you want to cancle this reservation?
OK
Cancel
Select Yes and press the OK button to delete the reserved programmes.
Delete
Select
Reserve
Sort
Edit
English-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Adding a Reservation
Recording Schedule
Add Reservation
1
2
Press the YELLOW button to add a new reservation.
Channel
Date
ꢁꢀ¿YHꢀ
Ź
24/05(Wed)
00 : 05
02 : 05
ONCE
Start Time
End Time
Repeat
Lock
Select Channel and Date.ꢀ3UHVVꢀWKHꢀŹꢀEXWWRQꢀWRꢀGLVSOD\ꢀFKDQQHOꢀDQGꢀGDWHꢀ
OLVWVꢀDQGꢀVHOHFWꢀDQꢀLWHPꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀOK button. You can also
select a channel using the NUMBER(0-9) buttons.
Disable
Save
Cancel
3
4
Select Start/End TimeꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀŻꢆŹꢀEXWWRQꢀWRꢀ
move back 1 minute or move 1 minute ahead. To change the time using the
NUMBER(0-9) buttons, press the OK button.
Delete
Select
Reserve
Sort
Edit
Select Repeat mode among ONCE, DAILY, WEEKLY,
WEEKDAY (Mon-Fri) and WEEKENDꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
5
6
7
8
Select LockꢀPRGHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Select Save and press the OK button to save the changes.
Select Cancel and press the OK button to cancel the reservation.
If the channel is locked, you will be prompted to enter the password to
complete the reservation.
Notes:
1. The recording schedule can’t be overlapped with two or more other
programmes.
2. The Power On/Off time can overlap the recording schedule.
3. The default password is 0000. If you have forgotten the password, please
contact your local product distributor.
Sorting by Time/Name
Each time you press the BLUE button, the sorting order of the reserved
programmes change in the following sequence: by descending time, by
ascending time, by name.
Recording Schedule
Editing a Reserved Programme
Add Reservation
Channel
Date
ꢁꢀ¿YHꢀ
Ź
1
2
Select a programme you want to edit and press the OK button.
24/05(Wed)
00 : 05
02 : 05
ONCE
Start Time
End Time
Repeat
Lock
For more information about how to edit the information, refer to
Chapter 11. Recording and Playback > Recording Schedule > Adding a
Reservation.
Disable
Save
Cancel
Delete
Select
Reserve
Sort
Edit
English-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Programme Playback in the Play List
You can playback the recorded programme by pressing the PLAYLIST button.
You can switch among VIDEO (TV), AUDIO (radio) and Selected Files list
XVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
VIDEO/AUDIO List
1
2
Select VIDEO/AUDIOꢀOLVWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
If you select programmes using the GREEN button, the programmes you
select will add to Selected Files list automatically.
Notes:
1. For more information about Delete, Select, Sort and Play, refer to Chapter
11. Recording and Playback > Programme Playback in the Play List >
Selected Files List.
Delete
Unselect
Move
Sort
Play
2. Move is inactivated in VIDEO/AUDIO list.
Selected Files List
1
2
Select Selected FilesꢀOLVWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Select the programmes and press the GREEN button to select the recorded
programmes. To unselect the selected programmes, press the GREEN
button again.
3
4
Select the programmes you want to remove using the GREEN button and
press the RED button to remove the recorded programmes from Selected
Files list.
Remove
Select
Move
Sort
Play
Select the programmes you want to move using the GREEN button and
press the YELLOW button. Move the cursor to the destination using the
ŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
A pop-up will appear. Select Yes and press the OK button.
5
6
Each time you press the BLUE button, the sorting order of the recorded
programmes change in the following sequence: by descending time, by
ascending time, by name.
Select programmes you want to playback using the GREEN button and
press the OK or PLAY button to play the recorded programmes. The
programmes will be played in the selected order.
Notes:
1. You also can playback the recorded programme in MENU-Recording-
Playlist.
2. You can playback the programme currently being recorded.
3. The playback icon will be displayed when the programme is being played.
4. The recording icon will be displayed when the programme is being recorded.
5. Certain parts of the programme may blink when playing back a recorded
programme in case the recording mode is switched from scramble to
descramble or vice versa.
English-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Chase Play
You can watch the programme from the beginning as the rest of the programme
is simultaneously being recorded.
While recording, you can perform TSR (Time Shifted Recording) using the
playback control buttons.
Note: You can playback the programme being recorded after it has been
recorded for at least 30 seconds.
Editing Recorded Programmes
1
Press the MENU button.
Recorded Programme
2
3
Select RecordingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select PlaylistꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ7KHꢀ
recorded programme list appears.
Notes
1. The programme being recorded will be added to the recorded programme list
after it has been recorded for at least 30 seconds.
2. Press the INFO button to see the detailed information about the programme
you have selected if provided.
Delete
Unselect
Edit
Sort
Play
Selecting/Unselecting Recorded Programmes
1
2
Select a programme and press the GREEN button. You can select multiple
programmes.
Recorded Programme
To unselect the selected programmes, press the GREEN button again.
Warning
Do you want to delete these recorded
programmes?
Deleting Recorded Programmes
Yes
No
1
2
After selecting reserved programmes using the GREEN button, press the
RED button.
Unselect
Edit
Sort
Delete
Play
Select Yes and press the OK button to delete the recorded programmes.
Notes:
1. If the protect option of the programme is set to Enable, you cannot delete the
programme. Please refer to Chapter 11. Recording and Playback > Editing
Recorded Programmes > Changing the Attribute.
2. You can delete multi programmes except for the protected programmes.
3. When not using the GREENꢀEXWWRQꢄꢀWKHꢀ¿OHꢀWKHꢀFXUVRUꢀLVꢀORFDWHGꢀDWꢀZLOOꢀEHꢀ
deleted.
English-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Trimming the Recorded Programme
1
Select a programme and press the YELLOW button to trim the recorded
programme.
2
3
A pop-up will appear. Select Trim and press the OK button.
Recorded Programme
You can trim the recorded programme using the following functions.
Edit
16 QVC
QVC Selection
Note:
24/03(Wed) 1 : 04 - 2 : 04
File Size / Used Size
• When selecting multiple programmes, Trim is inactivated.
• You can trim recorded TV (Video) channels only.
15738MB / 53670MB
Trim
File
Cancel
Delete
Unselect
Edit
Sort
Play
Save
<RXꢀFDQꢀVDYHꢀWKHꢀVHOHFWHGꢀUHFRUGLQJꢀSDUWꢀDVꢀDꢀGLIIHUHQWꢀ¿OHꢁ
6HOHFWꢀWKHꢀVWDUWLQJꢀSRLQWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀRECORD button.
6HOHFWꢀWKHꢀHQGLQJꢀSRLQWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀRECORD button.
Press the STOP button. A pop-up will appear. Select Save and press the OK
button to save the selected part.
Select Reset and press the OK button to reset the edit.
Warning: This function will overwrite the original recording.
Delete
You can delete the selected recording part.
6HOHFWꢀWKHꢀVWDUWLQJꢀSRLQWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀRECORD button.
6HOHFWꢀWKHꢀHQGLQJꢀSRLQWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀRECORD button.
Press the STOP button. A pop-up will appear. Select Delete and press the OK
button to delete the selected part.
Select Reset and press the OK button to reset the edit.
Notes:
1. You can select several parts simultaneously.
2.ꢀ$IWHUꢀVHOHFWLQJꢀWKHꢀSRLQWꢀ\RXꢀZDQWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢄꢀ\RXꢀFDQꢀYLHZꢀWKHꢀ
scene of the point you select by pressing the OK button.
Split
You can split the recorded programme into separate recordings.
6HOHFWꢀWKHꢀSRLQWꢀ\RXꢀZDQWꢀWRꢀVSOLWꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀRECORD
button.
Press the STOP button. A pop-up will appear.
Select OK and press the OK button to split the selected point.
English-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
Changing the Attribute
1
Select a programme and press the YELLOW button to change the attribute
of the recorded programme.
2
3
A pop-up will appear. Select File and press the OK button.
Recorded Programme
Select Programme in the FileꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button to display a keyboard on the screen.
Enter the programme name on the keyboard. Select OK and press the OK
button to complete.
Edit
16 QVC
QVC Selection
24/03(Wed) 1 : 04 - 2 : 04
File Size / Used Size
15738MB / 53670MB
4
5
6
Select Protect in the FileꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀ
button to change Enable/Disable. You have to enter a password to change
the status from Enable to Disable.
Trim
File
Cancel
Delete
Unselect
Edit
Sort
Play
Select Lock in the FileꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢀ
to change Enable/Disable. You have to enter a password to change the
status from Enable to Disable.
Recorded Programme
File
16 QVC
After editing, you have to select Save and press the OK button to save your
changes.
QVC Selection
24/03(Wed) 1 : 04 - 2 : 04
Programme
Product
Lock
QVC Selection
Disable
Displayed when the recording is stopped because of an
unexpected error.
Disable
Save
Cancel
Displayed when the channel is protected from deleting and
editing.
Delete
Unselect
Edit
Sort
Play
Displayed when the channel is a locked channel.
Notes:
1. If the protect option of the programme is set to Enable, you cannot delete the
programme.
2. The default password is 0000. If you have forgotten the password, please
contact your local product distributor.
3.ꢀ,IꢀWKHꢀORFNꢀRSWLRQꢀRIꢀDꢀSURJUDPPHꢀLVꢀFRQ¿JXUHGꢀWRꢀEnable, you have to enter a
password to playback the programme.
Sorting by Time/Name
Each time you press the BLUE button, the sorting order of the recorded
programmes change in the following sequence: by descending time, by
ascending time, by name.
Playing Recorded Programmes
1
2
3
Select programmes you want to playback and press the OK or PLAY button.
The recorded programme will start to play in the video preview window.
Press the EXIT button to playback in the full screen.
English-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
MP3
You can enjoy the music or edit the MP3 list.
MP3
1
2
3
Press the MENU button.
Select RecordingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select MP3ꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁꢀ7KHꢀ03ꢇꢀ
list appears.
Random
Repeat
Playing MP3
Use
,
,
and
buttons
6HOHFWꢀWKHꢀ¿OHꢀ\RXꢀZLVKꢀWRꢀSOD\EDFNꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀWKHQꢀSUHVVꢀWKHꢀ
PLAY or OK button. Press the STOPꢀEXWWRQꢀWRꢀVWRSꢀSOD\LQJꢀWKHꢀFXUUHQWꢀ¿OHꢁꢀ$QGꢀ
press the PAUSEꢀEXWWRQꢀWRꢀSDXVHꢀWKHꢀFXUUHQWꢀ¿OHꢁ
Note: 3OHDVHꢀGRꢀQRWꢀSXWꢀWRRꢀPDQ\ꢀ03ꢇꢀ¿OHVꢀLQWRꢀDꢀVXEGLUHFWRU\ꢁꢀ7KLVꢀPD\ꢀOHWꢀ\RXꢀ
ZDLWꢀTXLWHꢀDꢀORQJꢀWLPHꢀXQWLOꢀWKHꢀ03ꢇꢀ¿OHꢀOLVWꢀDSSHDUVꢁꢀꢀ,WꢀLVꢀUHFRPPHQGHGꢀWRꢀSXWꢀQRꢀ
PRUHꢀWKDQꢀꢌꢈꢀ¿OHVꢀLQWRꢀDꢀVXEGLUHFWRU\ꢁ
Downloading MP3 Files
<RXꢀFDQꢀHQMR\ꢀWKHꢀPXVLFꢀRQꢀ\RXUꢀ79ꢀE\ꢀGRZQORDGLQJꢀWKHꢀ03ꢇꢀ¿OHVꢀVWRUHGꢀLQꢀ\RXUꢀ
computer to the supplied hard disk drive.
Notes:
1.ꢀ<RXꢀFDQꢀXVHꢀRQO\ꢀXSꢀWRꢀꢌꢀ*%ꢀLQꢀWKHꢀKDUGꢀGLVNꢀGULYHꢀIRUꢀWKHꢀ03ꢇꢀ¿OHVꢁ
2. Do not delete or rename the MP3 folder in the hard disk drive.
3. Please stop the hard disk drive using the Safely Remove Hardware function
RQꢀZLQGRZVꢀEHIRUHꢀGLVFRQQHFWLQJꢀLWꢀIURPꢀ\RXUꢀFRPSXWHUꢁꢀ,IꢀQRWꢄꢀWKHꢀ¿OHVꢀPD\ꢀ
not be downloaded completely.
English-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11 >> Recording and Playback
HDD Control
You can check the free space of the connected hard disk drive and format
(erase) the disk drive if necessary.
HDD Control
1
2
3
4
5
Press the MENU button.
Select RecordingꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select HDD Control XVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
You can check the free, used, reserved and total space of the HDD.
Format
: Format a hard disk drive
Select Format and press the OK button to remove all the recorded
programmes saved on the HDD and initialise the HDD.
HDD Control
6
Select YesꢀZKHQꢀWKHꢀIRUPDWꢀFRQ¿UPDWLRQꢀPHVVDJHꢀDSSHDUVꢀDQGꢀHQWHUꢀDꢀ
password to start formatting the HDD.
Warning
Do you want to format a hardd disk
drive?
Notes:
No
Yes
1. The format deletes all the recorded programmes saved on the HDD including
79ꢄꢀUDGLRꢀDQGꢀ03ꢇVꢁꢀ)RUPDWWLQJꢀGRHVꢀQRWꢀGHOHWHꢀWKHꢀV\VWHPꢀ¿OHVꢀRIꢀWKHꢀ79ꢁ
2. The default password is 0000. If you have forgotten the password, please
contact your local product distributor.
Format
: Format a hard disk drive
3. A certain amount of space is reserved for TSR.
English-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12 >> Setting the Aspect Ratio
Setting the Aspect Ratio
You can select the modes by simply pressing the WIDE button on the remote
control.
Auto > 4:3 > 14:9 > Full > Zoom
Notes
1. When the Component or HDMI input mode, you can select only the 4:3, 14:9
or Full.
2. It is not available in the PC input mode.
Auto
Displays the picture as the original aspect ratio of the signal you received.
4:3
Displays the picture in the 4:3 ratio. The black bar appears on each side.
4 : 3
14:9
Displays the picture in the 14:9 ratio. The thin black bar appears on each
side.
14 : 9
Full
'LVSOD\VꢀWKHꢀSLFWXUHꢀLQꢀWKHꢀꢊꢌꢍꢎꢀUDWLRꢀWRꢀ¿OOꢀWKHꢀHQWLUHꢀVFUHHQꢁ
Full
Zoom
'LVSOD\VꢀWKHꢀSLFWXUHꢀ]RRPHGꢀWRꢀ¿OOꢀWKHꢀꢊꢏꢍꢎꢀUDWLRꢀZLWKꢀEODFNꢀVLGHEDUVꢁꢀ7KHꢀWRSꢀ
and bottom of the picture are slightly cropped.
Zoom
English-67
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 13 >> Using the Teletext
Displaying Teletext information
You can display teletext information at any time on your TV.
Most TV broadcasting stations provide text information services via teletext.
The index page of the teletext service gives you information on how to use the
VHUYLFHꢁꢀ<RXꢀFDQꢀDOVRꢀVHOHFWꢀYDULRXVꢀRSWLRQVꢀWRꢀ¿Wꢀ\RXUꢀQHHGVꢀXVLQJꢀWKHꢀUHPRWHꢀ
control buttons.
Note: To properly display teletext information, channel reception must be stable.
Otherwise, information may be missing or some pages may not be displayed.
TELETEXT function buttons are as follows:
(Teletext On/Off)
Activates or deactivates the teletext service.
(Mix)
Overlaps the teletext with the broadcasting screen.
Adjusts the opacity to the background in Teletext mode.
(Index)
Displays the teletext index page.
(Cancle)
Displays TV programme when waiting for the new teletext page.
(Reveal)
Shows the hidden information. (answers to quiz games, for example)
Press it again to return to normal display.
(Mode)
Selects the teletext mode (LIST/FLOF)
(Size)
Displays the double-size letters for lower half of the screen, press it again to
return to normal display.
(Hold)
Holds the display on a given page if the selected page is linked with several
secondary pages that automatically follow. To resume, press it again.
(Time)
When watching TV programmes, press this button to display the current time at
the top right hand corner of the screen.
Numeric (0~9)
Press to enter the three-digit page number given in the content.
Coloured buttons (Red/Green/Yellow/Blue)
If the FASTEXT system is used by a broadcasting company, the different topics
covered on a teletext page are colour-coded and can be selected by pressing
the coloured buttons. Press one of them corresponding to your needs. The page
is displayed with other coloured information that can be selected in the same
way. To display the previous or next page, press the corresponding coloured
button.
English-68
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14 >> Setting the PC
The PC menu is available only when there is a PC input signal.
1
2
Press the TV/AV button to switch to PC mode.
Select PCꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
$XWRꢀ&RQÀꢀJXUH
$XWRPDWLFDOO\ꢀRSWLPL]HVꢀWKHꢀGLVSOD\ꢁꢀ7KLVꢀLVꢀUHFRPPHQGHGꢀIRUꢀWKHꢀ¿ꢀUVWꢀWLPHꢀ
> > P C
connecting to a PC.
Auto Configure
H. Position
V. Position
Clock
0
0
0
3
4
5
6
Press the MENU button.
Phase
53
Select SystemꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Select PCꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOKꢀRUꢀŹꢀEXWWRQꢁ
Selectꢀ$XWRꢀ&RQ¿ꢀJXUHꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢀDQGꢀSUHVVꢀWKHꢀOK button.
Move
Select
Position
$GMXVWVꢀWKHꢀGLVSOD\ꢀSRVLWLRQꢀWRꢀ3&ꢀLIꢀLWꢀGRHVꢀQRWꢀ¿ꢀWꢀWKHꢀ79ꢀVFUHHQꢁ
> > P C
Auto Configure
H. Position
V. Position
Clock
0
0
0
6
7
Select H. Position/V. PositionꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
$GMXVWꢀWKHꢀRSWLPDOꢀSRVLWLRQꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Phase
53
Move
Adjust
English-69
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14 >> Setting the PC
Clock
> > P C
Adjusts the horizontal feature of screen by increasing or decreasing the number
of pixels.
Auto Configure
H. Position
V. Position
Clock
0
0
0
Phase
53
6
7
Select ClockꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
$GMXVWꢀWKHꢀRSWLPDOꢀKRUL]RQWDOꢀIHDWXUHꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Move
Adjust
Phase
Sets the focus of screen.
> > P C
Auto Configure
H. Position
V. Position
Clock
0
0
0
6
7
Select PhaseꢀXVLQJꢀWKHꢀŸꢆźꢀEXWWRQꢁ
$GMXVWꢀWKHꢀRSWLPDOꢀIRFXVꢀXVLQJꢀWKHꢀŻꢆŹꢀEXWWRQꢁ
Phase
53
Move
Adjust
Note: If noise is present, change the PC mode to another resolution, change
the refresh rate to another rate until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the PC graphic card or consult the
manufacturer of the PC graphic card.
English-70
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Map
Menu Map
- Mode
Picture
- Brightness
- Contrast
- Sharpness
- Colour
- Fleshtone
- Colour Temp.
- Backlight
- Effect
Sound
- Balance
- AVL
- SRS TruSurround
- Country
Channel
System
- Auto Search
- Manual Search
- Edit Channels
- Language
- Time Setting
- Change Password
- CI --------------------------------------------------- (Digital TV Input only)
- PC ----------------------------------------------------------- (PC Input only)
- DTV Setup ------------------------------------- (Digital TV Input only)
- Panel Off ---------------------------------------- (Digital TV Input only)
- VFD Clock ------------------------------------------ (LGB-19DZT only)
- Default Setting
- Schedule
Recording
- Playlist
(Digital TV input only)
(HDD connected only)
- MP3
- HDD Control
English-71
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
Before contacting your local service dealer, please make sure you refer to the following guide. If the TV
does not work normally after completing the following trouble shooting, please contact your local TV
distributor or service centre.
(1) No message is displayed on the front panel or the TV has no power.
-
-
-
-
Check the main power cable and make sure it is plugged into a suitable power outlet.
Check that the mains supply is switched on.
Check that the power switch is on at the TV (where applicable)
Connect the power cable to a different power outlet.
(2) No picture
-
Make sure that the TV is power on and in operation mode (press STANDBY button).
ꢅꢀ 0DNHꢀVXUHꢀWKDWꢀWKHꢀ$9ꢀFDEOHꢀLVꢀ¿UPO\ꢀFRQQHFWHGꢀWRꢀWKHꢀ79ꢁꢀ<RXꢀPD\ꢀQHHGꢀWRꢀUHPRYHꢀWKHꢀFDEOHꢀ
from both ends and reconnect.
-
-
-
Make sure that the antenna line is properly connected to the TV.
Check the brightness level of the TV.
Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is
running.
(3) Poor picture & sound quality
-
-
-
-
Install the antenna in an obstacle-free place.
Make sure there is no mobile phone or microwave oven near the TV.
Use 75 coaxial cable when connecting TV and antenna.
When the 1080i video input signal is displayed on the TV screen through the Component or
+'0,ꢀMDFNꢄꢀWKHꢀVFUHHQꢀÀLFNHUꢀPD\ꢀRFFXUꢁꢀꢂ/*%ꢅꢊꢎ'57ꢀRQO\ꢃ
(4) No or poor sound
-
-
-
-
Check that your AV cable is connected correctly.
Check the volume levels of your TV.
Check if the TV is on mute.
Check audio type or soundtrack option.
(5) Remote Control does not operate.
-
To control the TV, the top end of the remote control should point directly towards the receiving
part of the TV.
Remove and reinsert the batteries in the remote control.
Replace the batteries in the remote control for a new set.
-
-
(6) Cannot watch scrambled channel.
-
Check that you have the appropriate Smartcard or CAM. Reinsert the Smartcard or CAM and
make sure it initializes correctly.
-
-
Check in the menu that the TV is detecting the Smartcard or CAM.
Check in the menu that you have a valid and working subscription to the channels you wish to
view.
-
Ensure that the Smartcard or CAM is not damaged.
(7) Cannot make reservations.
ꢅꢀ &KHFNꢀWKDWꢀQRꢀSUHYLRXVꢀUHVHUYDWLRQVꢀDUHꢀFRQÀLFWLQJꢀZLWKꢀWKHꢀQHZꢀUHVHUYDWLRQꢁ
-
Check that the TV is switched on at the time of the reservation.
(8) No password information is given.
The default password is always 0000.
-
(9) Channel search does not work.
Check that your antenna is connected correctly.
-
(10) Cannot update new software.
-
You can get an update. If the TV does not show a message requesting update, that means no
software is available.
(11) Cannot watch pay channels.
-
Check in the menu that you have a valid and working subscription to the channels you wish to
view.
-
Contact your network operator for more information.
English-72
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
(12) Cannot record progammes.
-
-
-
Make sure that the HDD is connected correctly.
The hard disk is full. Delete unnecessary programmes and make space for new recording.
Check if recording is overlapped with another channel. Stop the current recording or wait until
WKHꢀUHFRUGLQJꢀLVꢀ¿QLVKHGꢁ
(13) Cannot operate the TSR (Time Shifted Recording)
Make sure that the HDD is connected correctly.
ꢅꢀ 7KHꢀ765ꢀPD\ꢀQRWꢀEHꢀDYDLODEOHꢀGXULQJꢀWKHꢀUHFRUGLQJꢁꢀ:DLWꢀXQWLOꢀWKHꢀUHFRUGLQJꢀLVꢀ¿QLVKHGꢁ
Delete unnecessary programmes and make space for new recording.
-
-
(14) Cannot playback.
-
-
Make sure that the HDD is connected correctly.
The signal during the recording may be weak or the hard disk too full.
(15) Cannot change channel while recording.
Certain channels may not be changed due to restriction of the tuner type.
-
Error Message
Error message
Possible causes
What to do
No signal
-
-
The aerial is not pointing properly.
The AV device is not connected
properly.
-
-
Adjust aerial.
Check the cable from the aerial. If
you cannot resolve the problem you
may need to have your aerial and
installation tested by a professional.
Set the AV device correctly.
-
-
Check the cable from the AV device.
Will not accept
Invalid Mode
-
-
The key(button) is not supported
for this product.
The resolution of connected PC is
not set properly.
-
Check the optimal resolution
settings. You may need to download
a new video driver.
No Subtitle Data
-
The channel has not the subtitle
data.
ꢅꢀ &RQ¿UPꢀLIꢀWKHꢀFKDQQHOꢀLVꢀSURYLGHGꢀ
the subtitle data.
The channel is scrambled
or not available.
-
-
-
The channel has signal, but no
audio or video.
The channel is deleted by the
broadcasting company.
The channel is for data
broadcasting. (Cannot watch the
channel in usual way.)
ꢅꢀ &RQ¿UPꢀLIꢀWKHꢀFKDQQHOꢀLVꢀFXUUHQWO\ꢀ
on air.
The channel is scrambled.
The audio is not available.
-
-
This digital terrestrial receiver
does not support the service
that enables to descramble the
scrambled channels.
The channel has a video signal,
but no audio is provided.
-
Press the audio buttons on your
UHPRWHꢀFRQWUROꢀWRꢀFRQ¿UPꢀWKDWꢀWKHꢀ
channel has audio options.
CI-Module is not installed.
/ Invalid CI-Module
-
-
-
CI-Module is not installed.
CI-Module is not properly inserted.
CI-Module is broken.
-
-
-
Install proper CI-Module.
Pull out the CI-Module and plug it in.
Replace CI-Module.
English-73
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
6SHFLÀFDWLRQ
Item
6SHFL¿FDWLRQ
Colour active matrix TFT-LCD
Type
Display Area
19.0”/22.0”
LGB-19DRT : 1440 x 900 pixels
LGB-22DRT : 1680 x 1050 pixels
LCD Panel
PC Monitor
Max. Resolution
Viewing Angle
Sync
5ꢆ/ꢀꢍꢀꢊꢐꢈꢄꢀ8ꢆ'ꢀꢍꢀꢊꢐꢈꢀꢂ&5ꢀꢊꢈꢃ
Separate
Horizontal Frequency 31.469~48.363kHz
Vertical Frequency
MAX. Resolution
60Hz
1360 x 768 pixels@60Hz
Analog + Digital Tuner(1), SCART, RCA, S-Video, Component,
HDMI, PC
Video Input
Audio Input
RCA(R/L), Component (R/L), HDMI, PC Audio
Speaker, Headphone
Input/Output
Audio Output
Data Interface
RS-232C(for SW update), USB (for PVR)
Analog
Digital
Area
EU
EU(MHEG)
Antenna Input
Tuning System
IEC 169-2 Female
FS
IEC 169-2 Female
OFDM DVB-T
PAL, B/G, D/K, I
SECAM, B/G, D/K
Colour System
B/G, I, D/K
TV Signal
Sound System
VHF Low
VHF High
UHF
AM / FM / Nicam
MPEG 1 Layer 1/2
48.25 ~ 144.00 MHz
145.00 ~ 424.00 MHz
425.00 ~ 863.25 MHz
Yes
48.25 ~ 144.00 MHz
145.00 ~ 424.00 MHz
425.00 ~ 863.25 MHz
Teletext
Safety
Yes
CE
CE
Regulation
Others
EMI
LGB-19DRT : 65W (Max.)
LGB-22DRT : 68W (Max.)
8W x 2EA
DDC 1/2 B
LGB-19DRT : NET 7.0 kg / Gross 9.6 kg
LGB-22DRT : NET 8.1 kg / Gross 10.6 kg
Power
Speaker Output
Plug & Play Level
Weight
Power Supply
HDD
AC 100V ~240V, 50/60 Hz
80GB
Operating Temperature 5°C ~ 35°C
Operating Humidity 30 ~ 80% RH
English-74
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support
Service and Support
You can get information such as a troubleshooting guide, software upgrades and product support guide
IURPꢀWKHꢀIROORZLQJꢀZHEꢀVLWHVꢀDQGꢀFDOOꢀFHQWHUꢀꢂ+RWOLQHꢃꢁꢀ3OHDVHꢀWU\ꢀWRꢀFRQWDFWꢀWRꢀ\RXUꢀORFDOꢀGHDOHUVꢀ¿UVWꢀ
when facing a problem.
Web site and e-mail
Homepage
English
Deutsch
Arabic
HCSA (Humax Customer Service Area)
Software Download, Information and Technical Q&A
English
Deutsch
E-mail (Technical Q&A)
Europe & North Africa
Germany
Middle East
Asia & Other area
English-75
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support
Call Center
Humax Customer Helpline (UK)
Tel: 0870 247 8800
E-mail: [email protected]
Open: Local Time in UK (GMT+0), 09:00 – 18:00 (Monday -Friday)
Support Language: English
Humax Middle East Call Center (Dubai, UAE)
Tel: +971 (0)4 359 2323 (Open: 09:00 - 20:00 / close on Friday)
E-mail: [email protected]
Open: Local Time in Dubai (GMT+4), 09:00 - 20:00 (Saturday - Thursday, close on Friday)
Support Language: English/Arabic
Humax Hotline (Germany)
Germany:ꢀꢈꢊꢑꢈꢌꢀꢒꢒꢑꢀꢎꢈꢈꢀꢂꢀ¼ꢀꢈꢄꢊꢉꢆ0LQꢃ
Other Countries:ꢀꢋꢀꢏꢎꢀꢊꢑꢈꢌꢀꢒꢒꢑꢀꢑꢒꢈꢀꢂꢀ¼ꢀꢈꢄꢊꢉꢆ0LQꢋꢀ,QWHUQDWLRQDOꢀ&DOOꢀ&KDUJHꢃ
E-mail: [email protected]
Open: Local Time in Germany (GMT+1), 08:00 - 23:00 (Monday - Sunday)
Support Language: Deutsch/English
HUMAX Hotline (Italy)
Tel : 899 100080
E-mail : [email protected]
Open : Local Time in Italy (GMT+1), 08:00~18:00 (Monday - Friday)
Support Language : Italian
HUMAX Hotline (Austria)
Tel :ꢀꢈꢑꢉꢈꢀꢏꢈꢈꢐꢒꢌꢀꢂꢀ¼ꢀꢈꢄꢊꢉꢆPLQꢁꢃ
HUMAX Hotline (Sweden)
Tel : +46 (0)550 85527
Open : 08:00 ~ 16:30 (Monday - Friday)
Support Language : Swedish/English
HUMAX Hotline (Finland)
Tel : 09 5618 6366
Open : 08:00 ~ 16:00 (Monday - Friday)
Support Language : Finnish/English
For hardware repair, please refer to website. (Homepage or HCSA)
English-76
Download from Www.Somanuals.com. All Manuals Search And Download.
|