Instructions for Installation and Use
Washing machine
Model ET 1400
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for use
WASHING MACHINE
Contents
GB
Installation, 2-3-4-5
Unpacking and levelling, 2
Electric and water connections, 2-3
The first wash cycle, 4
GB
English,1
Technical details, 5
Washing machine description, 6-7
Control panel, 6
Display, 7
Starting and Programmes, 8
Briefly: how to start a programme, 8
Programme table, 8
Personalisations, 9
Setting the spin cycle, 9
Setting the temperature, 9
Setting the Delay Start, 9
Functions, 9
ET 1400
Detergents and laundry, 10
Detergent dispenser, 10
Bleach cycle, 10
Preparing your laundry, 10
Special items, 10
Woolmark Platinum Care, 10
Precautions and advice, 11
General safety, 11
Disposal, 11
Saving energy and respecting the environment, 11
Care and maintenance, 12
Cutting off the water or electricity supply, 12
Cleaning your appliance, 12
Caring for your appliance door and drum, 12
Cleaning the pump, 12
Checking the water inlet hose, 12
Troubleshooting, 13
Service, 17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
! Keep this instruction manual in a safe place for
future reference. Should the appliance be sold,
transferred or moved, make sure the instruction
manual accompanies the washing machine to inform
the new owner as to its operation and features.
Levelling your appliance correctly will provide it with
stability and avoid any vibrations, noise and shifting
during operation. If it is placed on a fitted or loose
carpet, adjust the feet in such a way as to allow
enough room for ventilation beneath the washing
machine.
GB
! Read these instructions carefully: they contain
vital information on installation, use and safety.
Electric and water connections
Unpacking and levelling
Connecting the water inlet hose
Unpacking
1. Insert seal A into the
end of the inlet hose
and screw the latter
onto a cold water tap
with a 3/4 gas threaded
1. Unpack the washing machine.
2. Check whether the washing machine has been
damaged during transport. If this is the case, do
not install it and contact your retailer.
A
mouth (see figure).
Before making the
3. Remove the 2
protective screws and
the rubber washer with
the respective spacer,
situated on the rear of
the appliance (see
figure).
connection, allow the
water to run freely until
it is perfectly clear.
2. Connect the other end
of the water inlet hose to
the washing machine,
screwing it onto the
appliance's cold water
inlet, situated on the top
right-hand side on the
rear of the appliance
(see figure).
4. Seal the gaps using the plastic plugs provided.
5. Keep all the parts: you will need them again if
the washing machine needs to be moved to
another location.
! Packaging materials are not children's toys.
3. Make sure there are no kinks or bends in the hose.
Levelling
! The water pressure at the tap must be within the
values indicated in the Technical details table
(on the next page).
Your machine may make a considerable amount of
noise if the two front feet have not been adjusted
correctly.
! If the water inlet hose is not long enough,
contact a specialist store or an authorised
serviceman.
1. Install the washing machine on a flat sturdy floor,
without resting it up against walls, furniture cabinets
or other.
2. If the floor is not
perfectly level, compen-
sate for any unevenness
by tightening or
loosening the adjustable
feet (see figure); the
angle of inclination,
measured according to
the worktop, must not
exceed 2°.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the drain hose
Your appliance is now supplied with a 13 amp fused
plug it can be plugged into a 13 amp socket for
immediate use. Before using the appliance please
read the instructions below.
GB
Connect the drain
hose, without bending
it, to a draining duct or
a wall drain situated
between 65 and 100 cm
from the floor;
WARNING - THIS APPLIANCE MUST BE EARTHED.
THE FOLLOWING OPERATIONS SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN.
65 - 100 cm
Replacing the fuse:
When replacing a faulty fuse, a 13 amp ASTA
approved fuse to BS 1362 should always be used,
and the fuse cover re-fitted. If the fuse cover is
lost, the plug must not be used until a
replacement is obtained.
alternatively, place it
over the edge of a
basin, sink or tub,
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of
the correct colour as indicated by the coloured
marking or the colour that is embossed in words on
the base of the plug. Replacements can be obtained
directly from your nearest Service Depot.
fastening the duct
supplied to the tap
(see figure). The free
end of the hose should
not be underwater.
Removing the plug:
If your appliance has a non-rewireable moulded
plug and you should wish to re-route the mains
cable through partitions, units etc., please ensure
that either:
! We advise against the use of hose extensions; in
case of absolute need, the extension must have
the same diameter as the original hose and must
not exceed 150 cm in length.
the plug is replaced by a fused 13 ampere re-
wearable plug bearing the BSI mark of approval.
or:
lectric connection
the mains cable is wired directly into a 13 amp
cable outlet, controlled by a switch, (in compliance
with BS 5733) which is accessible without moving
the appliance.
Before plugging the appliance into the mains
socket, make sure that:
• the socket is earthed and in compliance with
the applicable law;
Disposing of the plug:
Ensure that before disposing of the plug itself,
you make the pins unusable so that it cannot be
accidentally inserted into a socket.
• the socket is able to sustain the appliance's
maximum power load indicated in the Technical
details table (see page 5);
Instructions for connecting cable to an alternative plug:
Important: the wires in the mains lead are
coloured in accordance with the following code:
• the supply voltage is included within the values
indicated on the Technical details table
(see page 5);
Green & Yellow
Blue
Brown
Earth
Neutral
Live
• the socket is compatible with the washing
machine's plug. If this is not the case, replace
the socket or the plug.
As the colours of the wires in the lead may not
correspond with the coloured markings identifyng
the terminals in your plug, proceed as follows:
Connect Green & Yellow wire to terminal marked E
or
or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked L or
coloured Red.
Connect Blue wire to terminal marked N or
coloured Black.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
If a 13 amp plug (BS 1363) is used it must be fitted
with a
The first wash cycle
GB
13 amp fuse, either in the plug or adaptor or at the
distribution board.
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle with
detergent and no laundry, setting the 90°C
programme without a pre-wash cycle.
If you are in any doubt the electrical supply to your
machine, consult a qualified electrician before use.
How to connect an alternative plug:
The wires in this mains lead are coloured in
accordance with the following code:
BLUE
BROWN
GREEN & YELLOW
NEUTRAL (N)
LIVE (L)
EARTH (E)
Disposing of the appliance:
When disposing of the appliance please remove
the plug by cutting the mains cable as close as
possible to the plug body and dispose of it as
described above.
GREEN &
YELLOW
13 ampere fuse
BROWN
CROSS-BAR
CORD GRIP
BLUE
! The washing machine should not be installed in an
outdoor environment, not even when the area is
sheltered, because it may be very dangerous to
leave it exposed to rain and thunderstorms.
! When the washing machine is installed, the mains
socket must be within easy reach.
! Do not use extensions or multiple sockets.
! The power supply cable must never be bent or
dangerously compressed.
! The power supply cable must only be replaced by
an authorised serviceman.
Warning! The company denies all liability if and
when these norms are not respected.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Technical details
Model
ET 1400
68,6 cm wide
100 cm high
72,5 cm deep
Dimensions
Capacity
from 1 to 9 kg
Electric
connections
voltage 230/240 Volts 50 Hz
maximum absorbed power 2500 W
maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)
drum capacity 87 litres
Water
connections
Spin speed
up to 1400 rpm
Control
programmes
according to
IEC456 directive
programme C; temperature 60°C;
run with a load of 9 kg.
This appliance is compliant with the
following European Community
Directives:
- 73/23/CEE of 19/02/73 (Low
Voltage) and subsequent
amendments - 89/336/CEE of
03/05/89 (Electromagnetic
Compatibility) and subsequent
amendments
- 2002/96/CE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing machine description
Control panel
GB
ON/OFF
button
FUNCTION
buttons
Display
Control knob
START/CANCEL
button
SPIN
TEMPERATURE
DELAYSTART
KEYBOARD
LOCK
Programme key: to
consult a
DELAY START button to delay the start of the set
programme for a maximum period of 24 hours
(see page 9).
straightforward chart
of the different
programmes available
turn the lower part
outwards to open it.
KEYBOARD LOCK key. To lock all the keys on the
washing machine during operation or during Stand-
by mode.
Display to programme the washing machine and
follow the wash cycle progress (see opposite page).
FUNCTION buttons to select the functions
available. The button corresponding to the
function selected will remain on.
ON/OFF button to turn the washing machine on
and off (see page 8).
START/CANCEL button to start the programmes
or cancel any incorrect settings (see page 8).
N.B.: For safety reasons (eg. to avoid children
climbing into the drum), if there is no electricity
for more than two minutes the washing machine
will not restart unless the START/CANCEL button
is pressed.
SPIN button to adjust the spin speed or exclude it
altogether (see page 9).
TEMPERATURE button to adjust the wash tempe-
rature (see page 9).
Control knob to select the wash programmes.
The knob stays still during the cycle.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
GB
In addition to being a practical tool to programme your appliance (see page 9), the display provides useful
information concerning the wash cycle and status.
Once you have pressed the START/CANCEL button to
start the programme, the display will indicate the
amount of time left until the end of the wash cycle. If a
delayed start has been set (using the Delay Start, see
page 9), the delay time will be indicated on the display.
The following information is displayed during the wash
cycle:
Cycle phase under way:
Pre-wash
Wash cycle
Rinse
Spin cycle
Customised functions and options:
To select functions and options, see below and on
page 9.
Buzzer:
Your washing machine comes with a buzzer, which will
inform you of the various functions being carried
out, or of any malfunctions: incompatibility, option/
programme keys, start, end of cycle, reset.
Keyboard lock:
For your safety and that of your children, you can block all the keys during the machine's operation or
during waiting position (delayed start - Stand-by) by pressing the function key for 2 seconds.
To disable this function, hold the same button down for 4 seconds.
Door lock:
If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To
avoid any damages, wait for the symbol to switch itself off before you open the appliance door.
This model is equipped with a device that enables the door to be opened during the course of the wash cycle
(however, this is only an option in phases where the safety conditions are guaranteed). To carry out this
task, switch off the machine (by pressing the ON/OFF button), open the door, load the necessary clothes or
detergent, close it again, switch the machine back on by pressing the ON/OFF button and press the START/
CANCEL button. The machine will restart the wash cycle from the point at which it was interrupted.
At the end of the programme, the word END is displayed.
! In the event of an anomaly, an error code will appear, such as: F-01 (see page 13).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting and Programmes
5. Select any function (see page 9).
6. Start he programme by pressing the START/
CANCEL button.
To cancel it, keep the START/CANCEL button
pressed for at least 2 seconds.
7. When the programme has ended, the word END is
displayed. Take out your laundry and leave the
appliance door ajar to allow the drum to dry
thoroughly.
Briefly: starting a programme
GB
1. Turn the washing machine on by pressing button
All the icons will light up for a few seconds and
then go off.
2. Add the detergent and any fabric softener (see page 10).
3. Load your laundry into the washing machine (see
page 10) and shut the appliance door.
4. Set the knob to the desired programme. The
estimated duration of the selected programme is
displayed. The temperature and spin speed are
automatically set according to the programme
(to change them, see page 9).
.
If you wish to start a new wash cycle, the door
must be opened and shut for safety reasons
before the START/CANCEL button is pressed again.
8. Turn the washing machine off by pressing button
.
Programme table
Max. Cycle
Load length
(Kg.) (minutes)
Detergent
Type of fabric and degree of
soil
Wash
temp.
Fabric
softener
Progr.
Description of wash cycle
Pre-
wash
Wash
Standard
Cotton: Extremely soiled whites
(sheets, tablecloths, etc.)
Pre-wash, wash cycle, rinse cycles,
intermediate and final spin cycles
A
B
C
D
E
F
9
9
9
9
4
4
4
160
145
125
90
90°C
90°C
60°C
40°C
50°C
40°C
30°C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cotton: Extremely soiled whites
(sheets, tablecloths, etc.)
Wash cycle, rinse cycles,
intermediate and final spin cycles
Cotton: Heavily soiled whites
and fast colours
Wash cycle, rinse cycles,
intermediate and final spin cycles
Cotton: Slightly soiled whites and
delicate colours (shirts, jumpers, etc.)
Wash cycle, rinse cycles,
intermediate and final spin cycles
Synthetics: Heavily soiled fast
colours (baby linen, etc.)
Wash cycle, rinse cycles and delicate
spin cycle
90
Synthetics: Fast colours (all types
of slightly soiled garments)
Wash cycle, rinse cycles and delicate
spin cycle
75
Synthetics: Delicate colours (all
types of slightly soiled garments)
Wash cycle, rinse cycles and delicate
spin cycle
G
30
Delicates
Wash cycle, rinse cycles and delicate
spin cycle
Wool
H
J
40°C
30°C
3
3
60
80
•
•
•
•
Very delicate fabrics
(curtains, silk, viscose, etc.)
Wash cycle, rinse cycles, anti-crease
Big Size Load
Wash cycle, rinse cycles,
intermediate and final spin cycles
Bed & Bath
K
L
60°C
30°C
30°C
40°C
6,5
4
90
75
65
70
•
•
•
•
•
•
•
•
Wash cycle, rinse cycles, anti-crease
intermediate and final spin cycles
Feather Duvets
Synthetic Duvets
Woollen Blankets
Wash cycle, rinse cycles, anti-crease
intermediate and final spin cycles
M
N
4
Wash cycle, rinse cycles,
intermediate and final spin cycles
4
Specials
Rinse
•
Rinse cycles and spin cycle
Draining and spin cycle
Draining
Spin
Drain
Notes
- To ensure the machine operates correctly and is able to achieve the best possible washing performance,
werecommend that the maximum load indicated is not exceeded.
- For the anti-crease function: see Easy iron, opposite page.The information contained in the table is purely indicative.
Daily Wash - 30mins.
Programme G for Synthetics is designed to wash lightly soiled garments in a short amount of time: it only lasts
30 minutes and allows you to save on both time and energy. By setting this programme (G at 30°C), you can wash
different fabrics together (except for woollen and silk items), with a maximum load of 4 kg (see page 10).
We recommend the use of liquid detergent.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalisations
Setting the spin cycle
If, when the appliance is switched on, the KNOB is positioned
GB
on a programme with a spin cycle, a fixed
appears. Press
button
programme set will be displayed, and the
and the maximum spin speed allowed for the
icon flashes.
Press it again and the values lower until they reach OFF, which
indicates that the spin cycle has been excluded (press it again
to go back to the maximum value); stop on the desired speed,
after approximately 2 seconds the setting is accepted: the
symbol remains fixed. The spin cycle setting is enabled
with all the programmes except for J and the Draining cycle.
Option buttons
Setting the temperature
If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature
needs to be regulated, a fixed
programme set will be displayed and the
appears. Press button
and the maximum temperature allowed for the
icon flashes. Press it again and the temperature lowers until it
reaches OFF, which indicates a cold wash cycle (press it again to go back to the maximum value); stop on
the desired value, after approximately 2 seconds the setting is accepted: the symbol
The temperature adjustment is enabled with all wash programmes.
remains fixed.
Setting the Delay Start
Press the button
and you will see the word OFF on the display, while the relative symbol flashes.
Press the button again and "1h" appears, that is, a delay of one hour (this can reach up to 24h); stop on the
"desired" delay; after approximately 2 seconds the setting is accepted, following which, the time for the
set programme appears on the display and the symbol
remains on.
If you now press the START/CANCEL button, the set "delay" appears; this decreases every hour until the
start of the cycle. In this phase, the "delay" can only be modified by decreasing it.
The Delay Start regulation is enabled with all programmes.
For safety reasons (for example: preventing children from climbing into the drum and locking themselves
in), if the door is opened or closed before the effective start of the cycle, it will be necessary to press the
START/CANCEL button again.
Keyboard Lock (see page 7).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.
If you set a function that is incompatible with another function you selected previously, only the last one selected will be enabled.
Enabled with
programmes:
Function Effect
Comments
Allows for an impeccable
wash, visibly whiter than a
standard Class A wash.
A, B, C, D, E, F, K
Super
Wa sh
Use this function when the laundry that needs to be
washed is equal to or less than half the recommended
max. load (see Programme table).
A, B, C, D, E, F, H,
K, L, M, Rinse
cycle.
Reduces water and
energy consumption and
wash cycle times.
Mini
Load
Reduce the amount of detergent accordingly.
If you set this option, programmes E, F, J, L, M will be
suspended, leaving the laundry to soak (Anti-crease)
and EASY IRON button will flash:
This option reduces the
amount of creasing on
fabrics, making them
easier to iron.
C, D, E, F, J, K, L, M,
Rinse cycle.
- to conclude the cycle, press the START/CANCEL
button or the EASY IRON button;
Easy
Iron
- to run the draining cycle alone, set the knob to the
relative symbol
and press the START/CANCEL button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergents and laundry
Detergent dispenser
Sturdy fabrics: max 9 kg
GB
Synthetic fabrics: max 4 kg
Delicate fabrics: max 3 kg
Wool (Clothing): max 3 kg
Wool (Blankets): max 4 kg
Good washing results also depend on the correct
dose of detergent: adding too much detergent
won't necessarily make for a more efficient wash,
and may in fact cause build up on the interior of
your appliance and even pollute the environment.
How much does your laundry weigh?
1 sheet 400-500 g
The detergent dispenser is located inside the tub;
to access it the door must be opened.
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1200 g
1 towel 150-250 g
! Do not exceed the
maximum load level of
your laundry for each
type of fabric, as
indicated on the label in
the internal part of the
door (see figure):
A = Cotton
Open up the detergent
dispenser (see figure)
and pour in the
B = Wool
C = Synthetics
detergent and fabric
softener, as follows.
Special items
Curtains: fold curtains and place them in a pillow
case or mesh bag. Wash them separately without
exceeding half the appliance load. Use programme
J which excludes the spin cycle automatically.
Trainers: remove any mud. They can be washed
together with jeans and other tough garments,
but not with whites.
1
2
3
compartment 1: Detergent for pre-wash
(or bleach if carrying out the bleach cycle)
Woolmark Platinum Care
compartment 2: Detergent for the wash cycle
compartment 3: Additives (fabric softeners, etc.)
As gentle as a hand wash.
Hotpoint is the only washing machine to have
obtained the prestigious Woolmark Platinum
Care Plus mark of recognition (M.0505) from The
Woolmark Company, the organisation that certifies
the machine washing of all woollen garments.
Programme no. H - Wool - can even be used to wash
! When closing the door, the detergent dispenser
closes automatically.
! Do not use hand wash detergent because it may
form too much foam.
garments whose labels specify "hand wash only"
and guarantees optimum performance levels while
providing complete fabric care.
,
Preparing your laundry
Programme no. N - Woollen blankets - can be used to
wash large items made using pure virgin wool (not
pile), for example blankets, quilts, etc. The
programme also enables products of this type
P
! Unfold all garments completely before placing them
inside the washing machine.
• Divide your laundry according to:
whose labels specify "dry clean only"
to be
- the type of fabric/the symbol on the label.
- the colours: separate coloured garments from whites.
• Empty all pockets and check for loose buttons.
• Do not exceed the weight limits stated below,
which refer to the weight when dry:
washed, and offers the best performance levels
while guaranteeing complete fabric care. You should,
however, check that the description "machine
40
washable" is present on the label of any items
made using pile before washing them in the machine.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions and advice
! The washing machine was designed and built in
compliance with the applicable international safety
regulations. The following information is provided for
your safety and should consequently be read carefully.
obligation, that when you dispose of the
appliance it must be separately collected.
GB
Consumers should contact their local authority
or retailer for information concerning the
correct disposal of their old appliance.
General safety
• This washing machine should only be used by
adults and in accordance with the instructions
provided in this manual.
Saving energy and respecting the
environment
• Never touch the washing machine when
barefoot or with wet or damp hands or feet.
Environmentally-friendly technology
If you only see a little water through your
appliance door, this is because thanks to the
latest Ariston technology, your washing machine
only needs less than half the amount of water to
get the best results: an objective reached to
respect the environment.
• Do not pull on the power supply cable to unplug
the appliance from the electricity socket. Pull
the plug out yourself.
• Do not touch the drain water as it could reach
very high temperatures.
Saving on detergent, water, energy and time
• To avoid wasting resources, the washing
machine should be used with a full load. A full
load instead of two half loads allows you to save
up to 50% on energy.
• Never force the washing machine door: this
could damage the safety lock mechanism
designed to prevent any accidental openings.
• In the event of a malfunction, do not under any
circumstances touch internal parts in order to
attempt repairs.
• The pre-wash cycle is only necessary on
extremely soiled garments. Avoiding it will save
on detergent, time, water and between 5 and
15% energy.
• Always keep children well away from the
appliance while in operation.
• The appliance door tends to get quite hot during
the wash cycle.
• Treating stains with a stain remover or leaving
them to soak before washing will cut down the
need to wash them at high temperatures. A
programme at 60°C instead of 90°C or one at
40°C instead of 60°C will save up to 50% on
energy.
• Should it have to be moved, proceed with the
help of two or three people and handle it with
the utmost care. Never try to do this alone,
because the appliance is very heavy.
• Before loading your laundry into the washing
machine, make sure the drum is empty.
• Use the correct quantity of detergent
depending on the water hardness, how soiled
the garments are and the amount of laundry
you have, to avoid wastage and to protect the
environment: despite being biodegradable,
detergents do contain ingredients that alter
the natural balance of the environment. In
addition, avoid using fabric softener as much as
possible.
• Before starting the cycle, make sure the level
of maximum load of your laundry is respected.
Disposal
• Disposing of the packaging material:
observe local regulations, so the packaging can
be re-used.
• The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment,
• If you use your washing machine from late in the
afternoon until the early hours of the morning,
you will help reduce the electricity board's peak
load. The Delay Start option (see page 9) helps
to organise your wash cycles accordingly.
requires that old household electrical appliances
must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be
collected separately in order to optimise the
recovery and recycling of the materials they
contain and reduce the impact on human health
and the environment. The crossed out "wheeled
bin" symbol on the product reminds you of your
• If your laundry has to be dried in a tumble dryer,
select a high spin speed. Having the least water
possible in your laundry will save you time and
energy in the drying process.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and maintenance
Cutting off the water or electricity
supply
Checking the water inlet hose
GB
Check the water inlet hose at least once a year. If
you see any cracks, replace it immediately: during
the wash cycles, water pressure is very strong
and a cracked hose could easily split open.
•
Turn off the water tap after every wash. This
will limit the wear of your appliance's water
system and also prevent leaks.
•
Unplug your appliance when cleaning it and
during all maintenance operations.
! Never use hoses that have already been used.
Cleaning your appliance
The exterior and rubber parts of your appliance can
be cleaned with a soft cloth soaked in lukewarm
soapy water. Do not use solvents or abrasives.
Caring for your appliance door and drum
•
Always leave the appliance door ajar to prevent
unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning
pump that does not require any maintenance.
Sometimes, small items (such as coins and buttons)
may fall into the pre-chamber that protects the
pump, situated in the lower part of the same.
! Make sure that the wash cycle has ended and
unplug the appliance.
To access the pre-chamber:
1. remove the cover
panel (in the lower
front of the washing
machine), prizing it on
both sides with a
screwdriver. Do not
force it.
2. unscrew the lid
rotating it in anti-
clockwise. A little
water may trickle out
(about 1 liter). Put a
little container under
the hole.
3. clean the interior
thoroughly.
4. screw the lid back on.
5. reposition the panel, making sure the hooks are
securely in place before you push it onto the appliance.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Your washing machine could fail to work. Before calling for Assistance (see pages 17-18), make sure the
problem can't easily be solved by consulting the following list.
GB
Possible causes/Solution:
Problem
• The appliance is not plugged into the socket, or not enough to
make contact.
• There has been a power failure.
The washing machine won't start.
• The appliance door is not shut properly (the word DOOR is displayed).
• The
The wash cycle won't start.
button has not been pressed.
• The START/CANCEL button has not been pressed.
• The water tap is not turned on.
• A delayed start has been set (using the Delay Start, see page 9).
• The water inlet hose is not connected to the tap.
• The hose is bent.
• The water tap is not turned on.
The washing machine fails to load
water (The wording H2O is
displayed).
• There is a water shortage.
• The water pressure is insufficient.
• The START/CANCEL button has not been pressed.
• The drain hose is not fitted between 65 and 100 cm from the floor (see page 3).
• The free end of the hose is underwater (see page 3).
• The wall drainage system doesn't have a breather pipe.
The washing machine continuously
loads and unloads water.
If the problem persists even after these checks, turn off the water tap, switch
the appliance off and call for Assistance. If the dwelling is on one of the upper
floors of a building, there may be drain trap problems causing the washing
machine to load and unload water continuously. In order to avoid such an
inconvenience, special anti-drain trap valves are available in shops.
• The programme does not foresee the draining: some programmes
require enabling the draining manually (see page 8).
• The Easy iron option is enabled: to complete the programme, press
the START/CANCEL button (see page 9).
The washing machine does not
drain or spin.
• The drain hose is bent (see page 3).
• The drain duct is clogged.
• When the machine is installed, the locking screws for the oscillating
assembly are still in place. Remove the screws (see page 2).
• The washing machine is not level (see page 2).
• The washing machine is closed in between furniture cabinets and
the wall (see page 2).
The washing machine vibrates too
much during the spin cycle.
• The water inlet hose is not screwed on correctly (see page 2).
• The detergent dispenser is obstructed.
• The drain hose is not secured properly (see page 3).
The washing machine leaks.
• Switch off the machine and unplug the appliance; wait for
approximately 1 minute then switch it on again.
If the problem persists, contact Assistance.
The machine is locked and the display
flashes, indicating an error code (e.g.
F-01, F-..).
• The detergent is not suitable for machine washing (it should bear the
definition "for washing machines" or "hand and machine wash", or the like).
• You used too much detergent.
There is too much foam.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION - Please Read Carefully
This appliance is designed for domestic use only.
GB
We may be able to offer service cover under our 12-month guarantee for this appliance provided
that we are satisfied that it has:
-
-
-
-
-
Not been used to generate revenue.
Not been used on premises where the total number of rooms serviced by it exceeds 15.
Only been installed and operated in accordance with the manufacturer's handbook.
Been properly connected to a suitable electrical supply as stated on the rating plate on the appliance.
Only been used in premises situated within the United Kingdom or Republic of Ireland.
The availability of the 12-month guarantee where the appliance is being used in a non-domestic
situation is entirely at our discretion.
This appliance is heavier than most domestic washing machines. Our service engineers will use their best
endeavours to avoid damage to property or flooring when carrying out either service or repairs. If our
engineer is of the opinion that the appliance cannot be moved without damage being caused, then he will only
proceed to move the appliance upon your acceptance that we cannot be responsible for any such damage.
We would also remind you of the general exclusions of our guarantee. It does not cover the following:
1) No fault found / customer advice given on engineer visit. 2) Misuse. 3) Accidental damage.
4) Malicious damage. 5) Rectification of faulty repairs by non authorised personnel.
6) Modifications to equipment. 7) Connections to gas, electricity, water supplies.
8) Moving or re-siting appliances. 9) Rectifying problems due to gas, electricity, water supplies.
10) Rectifying cosmetic problems - e.g. scratches, dents, surface marks (if these have not been
notified to us within 72 hours of delivery). 11) Rectifying damage caused by water, fire, frost.
12) Trapped or kinked fill and drain hoses. 13) Rectifying faulty installations. 14) Faults caused by
failure to remove all packaging materials - e.g. transit bolts. 15) Pumps blocked by extraneous
objects - e.g. coins. 16) Replacement of consumables. 17) Degradation to glass, ceramic and steel
surfaces due to normal wear and tear. 18) Damage caused by limescale or detergents.
19) Routine maintenance and cleaning.
5 Year Parts Guarantee
Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on
you registering your appliance with us and the parts being fitted by one of our authorised
engineers. There will be a charge for our engineer's time. To activate the extra parts warranty on
your appliance, simply call our registration line on 0870 6092094 (ROI 01 230 0800).
Extended Guarantees
We offer a selection of repair protection plans that enable you to fully cover yourself against the
expense of repair bills for the life of your policy. To find the ideal plan for you please call our advice
line on 08709 088 088 (ROI 01 230 0233).
Free Helpdesk Service
We have a dedicated team who can provide free advice and assistance with your appliance if you
experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint
Service Hotline on 08709 066 066 (ROI 0818 313 413) for telephone assistance, or, where
necessary, to arrange for an engineer to call. If we cannot resolve the technical problem we will
replace your machine or, if you prefer, give you your money back.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
No one is better placed to care for your Hotpoint appliance during the course of its working life
than us - the manufacturer.
Essential Contact Information
Hotpoint Service
We are the largest service team in Europe offering you access to 400 skilled telephone advisors
and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service.
UK: 08709 066 066
Republic of Ireland: 0818 313 413
Please note: Our advisors will require the following information:
Model number:
Serial number:
Parts and Accessories
We supply a full range of genuine replacement parts as well as accessory products that protect and
hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life.
UK: 08709 077 077
Republic of Ireland: 0818 313 413
Appliance Registration
We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts
guarantee you must register your appliance with us.
UK: 0870 6092094
Republic of Ireland: 01 230 0800
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB
Indesit Company Unit 49 Airways Industrial Estate,Dublin 17
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to
use quality, recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children,
remove the door, plug and cut the mains cable off flush with the appliance. Dispose of these parts
separately to ensure that the appliance can no longer be plugged into a mains socket, and the door
cannot be locked shut.
April 2006
195.057.619.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|