Instructions for Installation and Use
Electric Hob
Models: E7134-E6005
To the Installer
Before installation fill in the product details on the back cover of this book.
The information can be found on the rating plate.
To the User
You must read the instructions prior to installing and using the appliance and
then retain them for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been
installed in accordance with the installation instructions detailed in this booklet.
To help make best use of your cooking equipment, please read this booklet carefully.
The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.
*The guarantee is subject to the provisions that the appliance:
(a) Has been used solely in accordance with this booklet.
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the
appliance.
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the
manufacturers authorised employee or agent.
(d) Has been correctly installed.
This appliance conforms with the following European Economic Community directives:
-
-
-
-
73/23/EEC of 19/02/73 (LowVoltage) and subsequent modifications;
89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;
90/396/EEC of 29/06/90 (Gas) and subsequent modifications;
93/68/EEC of 22/07/93 and subsequent modifications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Advice and recommendations
•
This appliance was designed for non-professional,
•
•
•
•
do not touch the appliance with wet or damp hands,
never use the appliance when barefoot,
never use extensions,
household use.
•
owner’s manual carefully since it contains all the
instructions you require to ensure safe installation, use
and maintenance.Keep this owner’s manual in a safe place
for future reference.
Before using the appliance, read the instructions in the
never pull on the power supply cable or the
appliance itself to unplug it from the mains socket,
never leave the appliance exposed to atmospheric
agents (rain, sun, etc.),
• do not allow children or persons who are not familiar
•
•
When you have removed the packing, check whether
the appliance is intact. If you have any doubts, contact a
qualified professional before using the appliance.
with the appliance to use it without supervision.
Always unplug the appliance from the mains or switch
•
•
Never leave the packing components (plastic bags,
off the main switch before cleaning or performing any
cleaning or maintenance operations.
polystyrene foam, nails, etc.) within the reach of children
since these are a source of potential danger.
•
If the surface of the glass cracks, unplug the
•
The appliance must be installed by a qualified
appliance immediately. For any repairs, contact only an
authorised after-sales service centre and demand original
spare parts. Failure to comply with the above may com-
promise the safety of the appliance.
technician in compliance with the instructions provided
by the manufacturer.
•
The latter denies all responsibility for improper
installation which may harm persons and animals and
damage property.
•
Cut the power supply cable after disconnecting it from
the power mains when you decide not to use the appliance
any longer. Also make all potentially dangerous parts of
the appliance safe, above all for children who could play
with the appliance.
•
The electrical safety of this appliance can only be
guaranteed if the latter is correctly and efficiently earthed,
in compliance with regulations on electrical safety.Always
ensure that this vital safety measure has been taken. If
you have any doubts, call in a qualified technician to check
the electrical system thoroughly.
•
The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object, such as a tool for
example. In this case, unplug the appliance
immediately and contact an authorised after-sales
service centre to have it repaired.
•
The manufacturer denies all responsibility for damage
resulting from a system which has not been earthed
correctly.
•
Before powering the appliance, check whether the
•
Remember that the heating area stays hot for at least
technical characteristics featured on the appliance data
plate correspond with those of the mains electrical system.
half an hour after being turned off; please refrain from
placing any cookware or other items on the cooking zone
while still hot.
•
Check that the current load of the mains supply and of
the power sockets is suitable for the maximum power of
the appliance, indicated on the appliance data plate. If in
doubt, contact a qualified professional.
•
Do not turn on the heating zones if aluminium foil or
plastic items have been placed on the hob surface.
Do not go near the heating zones when these are still
hot.
•
•
This appliance must only be used for the purpose for
which it was expressly designed. Any other use (such as
heating a room for example) is considered to be improper
and consequently dangerous.
•
If you use small electric appliances near the hob, make
sure their power supply cable does not come into contact
with the hot parts of the hob.
•
The manufacturer denies all responsibility for damage
resulting from improper or incorrect use of the appliance.
Certain fundamental rules must be followed when using
•
Make sure all pan handles are always pointing inwards
towards the centre of the hob to prevent any accidental
spills.
•
electrical appliances. The following are of particular
importance:
First use: the glue used on the hob seals may leave greasy traces on the glass surface.We recommend you wipe these
off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect
a smell of rubber, which will disappear quickly.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and fastening
The following instructions are intended for a qualified fitter
Fastening
to guide him/her along the installation, adjustment and
technical maintenance procedures as correctly as possible
and in full compliance with the applicable norms in force.
Important : unplug the hob before all operations.
Very important: It is vital that you ensure the glass
ceramic hob is built into a perfectly flat supporting surface.
Deformations due to improper fastening could alter the
characteristics of the hob and compromise its performan-
ce.
Installation
•
This hob can be built into a worktop simply by cutting
out the corresponding slot.
The worktop must be made with a material designed
to withstand a temperature of approximately 100°C.
The hob should be positioned at least 40 mm away
The fastening springs are fastened by screws (see
diagram).
It is vital that these screws be kept accessible at all
times.
Insert the hob into the cut-out slot, applying pressure all
along the perimeter of the hob frame so that the latter
adheres fully to the worktop.
•
•
from the back wall or any other vertical surface in order
to allow for correct ventilation and to prevent the
surfaces around the appliance from overheating.
•
If you wish to install the hob on top of an oven, the
latter must be fitted with a cooling fan.
Try to avoid installing the hob on top of a dishwasher;
REAR SPRING ASSEMBLY
•
if this is unavoidable, place a watertight separating
element between the two appliances.
FRONT OF HOB
KITCHEN
WORKTOP
Distance to
keep between the
cut-out slot and
the cabinet
HOB FROM BELOW
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical characteristics
To install the cable, proceed as follows:
Electrical connection
•
•
unscrew the wire clamp screw and the contact screws.
to make the desired electrical connection (see table),
use the jumpers housed inside the box. Position the
power supply cable wires according to the indications
in the table.
once the connections have been made, tighten all the
terminal screws fully.
Fasten the supply cable in place with the clamp and
close the cover of the terminal board.
•
The electrical safety of this appliance can only be
guaranteed if the latter is correctly and efficiently
earthed, in compliance with regulations on electrical
safety.Always ensure that this vital safety measure has
been taken. If you have any doubts, call in a qualified
technician to check the electrical system thoroughly.
•
•
•
The manufacturer denies all responsibility for
damage resulting from a system which has not been
earthed correctly.
•
Before powering the appliance, check whether the
technical characteristics featured on the appliance data
plate correspond with those of the mains electrical
system.
Voltage,
Frequency
Fuses,
Sections
Electrical connections
1
2
3
4
5
25 A*
2,5 mm²
•
Check that the current load of the mains supply and
230V-1+N~50 Hz
L
N
of the power sockets is suitable for the maximum power
of the appliance, indicated on the appliance data plate.
If in doubt, contact a qualified professional.
* Application of the simultaneity coefficient in accordance with
cei 60335-2-6 norm
Disconnect the appliance from the electricity supply
before all operations.
Connect your hob to the electrical system by means of a
junction box: if the appliance is connected permanently
to the mains, an omnipolar circuit breaker, accessible if
necessary, with a minimum contact opening of 3 mm
should be installed.
This appliance conforms with the following European
Community Directives:
-
-
-
73/23/EEC of 19/02/73 (LowVoltage) and subsequent
amendments;
89/336/EEC of 03/05/89 (Electromagnetic compatibility)
and subsequent amendments;
Valid only for models with a power supply cable for
three-phase connections
Some models are supplied with a three-phase power
supply cable, and should consequently only be con-
nected to the three-phase mains. Observe the wire col-
ours, as indicated in the diagram attached.
93/68/EEC of 22/07/93 and subsequent amendments;
Warning: If the hob is fitted above a built-in oven, the hob
and the oven must be connected to the mains separately
for safety reasons and to simplify operations when it is
necessary to pull the oven out for some reason.
Some models are not fitted with a power supply cable, as
the cable should be sized according to the type of electrical
connection in use (see connection table below).To connect
the cable, proceed as follows:
•
Using a screwdriver, prise on the side tabs of the
terminal board cover;
•
Pull open the cover of the terminal board.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking zone description
Radiant zones
This type of burner consists of several coils that guarantee the even distribution of heat over the bottom of the pan and
ensure the success of all cooking on low heat: simmering, sauces or reheating.
HOBS
ET7134
Diameter
ET6004
Diameter
(in mm)
2300
Power
(in W)
Diameter
(in mm)
210
Cooking zones
(in mm)
230
RD 1000/2300
Back left
R 1400
160
1200
140
Front left
RO 1100/2000
R 600
210
100
1400
1800
160
180
Back right
Front right
Overall power
6300
6700
H = halogen,
R = simple radiant,
RO = oval radiant,
RD = dual radiant,
The table below features information on how to use the
zones to their full potential.
Each zone is controlled:
by a selector key whose silk screen printing
reproduces the cooking zone drawing,
and by a power adjustment set comprising two parts
•
•
Power
Type of dish
(+,-).
1
2
3
4
5
6
7
8
9
Melted butter or chocolate
Reheating liquids
A specific key controls the extension of the zones
(concentric or oval).
Preparation of creams and sauces
Cooking stews, blanquette, desserts
Cooking pasta and rice
As long as the temperature of the cooking zones remains
above 60°C, even after use, the residual heat indicators
stay on(the power indicator displays H) to prevent the
risk of burns.
Sealing meat, fish, omelettes
Fried food
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The controls
1. ON/OFF key
8. The maximum zone on indicator light for the extendable
zones (concentric or oval): fitted beside each extendable
cooking zone
2. Cooking zone selector keys
3. Power (from 0 to 9) and residual heat indicators (H)
9. Timer control key for cooking time programming (only
on hobs fitted with a timer)
4. Zone selection indicator:
• on: the corresponding zone is selected and can be
modified,
10.Programmed cooking time indicator
• off: the corresponding zone is not selected, no
modification can be made.
11.Indicator light corresponding to the programmed
cooking zone
5. Power increase key
6. Power decrease key
12.Controls lock key
13.Lock indicator light
7. Extendable cooking zone(s) (concentric or oval)
extension key:featured by hobs fitted with 1 or 2 extendable
zones
Note
•
The extendable zone(s) extension key (7) and the relative indicator lights (8) are only fitted on hobs featuring
extendable cooking zones (concentric or oval).
The timer control key (9), the cooking time indicator (10) and zone indicator lights (11) are only fitted on hobs
featuring a timer.
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
When you connect the hob to the power supply, a beep
will sound after a few seconds: you can now turn the hob
on.
Turning off a cooking zone
To turn off a cooking zone, press the corresponding control
key and:
Turning on the hob
•
press both “+” and “-” simultaneously:the cooking
zone power drops immediately to zero and the zone is
turned off.
Press key
for 3 seconds to turn the hob on.
•
or press the “-” key: the heating power drops
Cooking zone control
Each cooking zone is operated by a control key and by a
progressively until the zone eventually turns off.
power adjustment set (+ and -).
Turning off the hob
Press the
key; the appliance has been turned off.
If you have locked the hob controls (see paragraph below),
the same will still be locked when you turn the hob back
on. Unlock the controls in order to operate the cooking
zones.
8.
8.
8.
8.
Controls lock
When the hob is in use, you can lock the controls to avoid
any accidental changes to the settings (by children or when
cleaning, for example).
Turning on a cooking zone
•
To turn a cooking zone on, press the corresponding
Just press the
key, the indicator light next to the key
control key and set the desired heating power (from 0 to
lights up and the controls are locked.
9) using the “+” and “-” keys.
To change the power level setting or stop cooking, the
controls have to be unlocked: press the
key, the
•
To set the maximum power directly (9), press key “-”
indicator light turns off and the controls are unlocked.
To access the setting of a cooking zone again, select the
zone by pressing the corresponding control key.
briefly.
•
To speed up the rise in temperature on a particular
cooking zone, proceed as follows:
1. set the cooking zone power to the maximum setting
(9),
Cooking time programming
A cooking zone can be programmed to cook from 1 minu-
te to a maximum of 99 minutes. Proceed as follows:
2. then press the “+” key: the power display will indi-
cate “A”,
3. now set the power you wish to cook with (for
example 5).
•
select the cooking zone by pressing the
corresponding control key,
set the desired heating power using the “+” and “-
” keys,
•
When this temperature is reached, the rapid rise in tem-
perature stops automatically and your cooking continues
normally at power setting 5.
•
•
press the programming key
,
set the desired cooking time using the “+” and “-”
Extendable cooking zone operation
(if your hob is fitted with extendable zones, see previous
page)
keys,
•
confirm the programming by pressing the
key
1. Press the control key corresponding to the cooking
zone,
again.
2. Set the desired heating power (from 0 to 9) using
the “+” and “-” keys,
The countdown begins immediately.
The end of programmed cooking is signalled by a beep
(one minute long) and the cooking zone is turned off.
3. Press the
power setting.
key to set the zone to the maximum
To go back to the smaller zone, just press the extension
key again.
The indicator light situated beside the extendable zone is
on when the large cooking zone is in use.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The safety devices
Acoustic signal
Overheating
Anomalies such as:
Prolonged use of the hob could cause the electronic
•
an object (such as a saucepan or a lid, etc.) placed
components to overheat.
for more than 10 seconds on the control zone,
A thermal protection device momentarily sets a reduced
power (setting 3) on the front cooking zones until the
temperature has dropped back down to a suitable level.
•
boiled-over liquids or food spilled on the control
zone,
•
prolonged pressure on a key,...
could cause a beep to sound and the hob to turn off.
To stop the beep from sounding, remove the cause of the
malfunction.
To use the hob, turn it back on and re-select the cooking
zone(s) you wish to use. Set the desired heating power.
Safety cut out
Your appliance is fitted with a safety cut out which
intervenes after a certain amount of time (see table)
depending on the power setting. When the safety cut out
has intervened, the power display indicates “0”.
for example: the back right cooking zone is set to 5 and
the front left zone is set to 2.The back right zone will turn
off after 4 hours of operation and the front left zone will
turn off after 6 hours of operation.
To unlock the controls, turn the hob off by pressing the
key.
Maximum operating
Power level
time in hours
1-2
3-4
5
6
5
4
6-7-8
9
1,5
1,5
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Hob care
Advice on using your appliance
The vitroceramic glass used for the heating surface is
smooth and poreless and it is also resistant to thermal
shocks and to mechanical shocks under normal conditions
of use. In order to preserve these properties, we
recommend you care for your hob as follows:
To get the best from your hob, it is vital that you follow
a few fundamental rules during cooking and when
preparing food.
•
Use pans with a flat bottom so they adhere fully to
the heating zone.
•
for ordinary maintenance, just wipe it with a damp
sponge and dry it thoroughly using paper towels.
If the hob is dirty, rub clean using a special cleaner
•
suitable for vitroceramic glass, rinse off and dry
thoroughly.
•
food residue and dirt can be removed using a
•
Always use pans whose diameter covers the
special scraper. Do this as soon as possible, do not
wait for the hob to cool down in order to avoid
incrustations. For excellent results, use a special
stainless steel wool pad for vitroceramic glass cleaning
soaked in soapy water.
cooking zone fully so that all the available heat can be
used.
•
When the hob is clean, you can apply a special
product for the care and protection of the same: this
type of product leaves an invisible film on the surface
of the hob to protect the same against any spills and
boiled-over food. It is best if you do this when the hob
is lukewarm or cold.
•
Make sure the pan base is always clean and dry, to
guarantee good contact and long life for the cooking
zones and pans alike.
•
The concentration of heat on gas burners can warp
the bottom of the pan, consequently you would never
obtain the desired result when using the pan on the
glass ceramic hob.
Avoid using pans used normally on gas burners.
•
Make sure you always rinse the hob with clean water
and dry it thoroughly: otherwise the cleaning products
could become encrusted onto the hob during
subsequent cooking.
•
Never leave a cooking zone on without a pan on it
as the maximum heat level would be reached very
quickly, which could damage the heating elements.
Recommendations
•
Never use abrasive or corrosive substances,
•
The glass ceramic hob is resistant to thermal and
such as aerosol cleaners for grills and ovens, stain
removers or rust removers, scouring powders and abra-
sive sponges:even the delicate ones could scratch the
hob surface irreversibly.
mechanical shocks. However, it may break due to a
shock caused by a sharp object. In this case, unplug
the appliance immediately and contact an authorised
after-sales service centre to have it repaired.
•
We recommend you keep all items which could melt
away from the hob, such as plastic utensils, sugar
or products with a high sugar content. Should liquid
boil over onto the hob surface, remove it immediately
(while the hob is still hot) using a razor blade scraper,
in order to avoid damaging the surface.
Always keep your hob clean. Before proceeding with
maintenance operations, check that all the cooking
zones are turned off and have cooled down completely.
Stainless steel frame (only on some models)
Stainless steel can stain as an effect of enduring
contact with limescale in water or as an effect of highly
aggressive detergents (containing phosphorus). We
recommend you rinse and dry it thoroughly after
maintenance. It is preferable to remove any water spills
immediately.
•
Use this hob exclusively for cooking. Do not
place items on the hob when the same is not in use.
Do not use the hob as a work surface (by placing lids,
saucepans or dishcloths on it, for example), nor as a
chopping board.
•
Never leave aluminium wrappers, aluminium foil and
plastic cookware on the hob when hot or still warm.
Do not use steam cleaners or high pressure
cleaners to clean your appliance.
•
11
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest white
goods repair service in the UK with over 1000 of our own fully trained engineers. All repairs include a
parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on hand with
help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover
plans to give you total peace of mind.
l Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the period
of cover.
l Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service
engineer to call. If the technical problem is not resolved under this guarantee, we will replace your
machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years provided that they are fitted by a Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the
following provisions that your appliance:
l
l
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not for
commercial or trade use).
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the appliance
rating plate.
Has not been subject to misuse, accident, modified or repaired by anyone other than one of our
own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to
use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged
into a mains socket, and the door cannot be locked shut.
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8:30 to 5:30 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Merloni Elettrodomestici UK Ltd, Morley Way, Peterborough, PE2 9JB.
195.043.664.00
05-2004 Part no. FP157 - 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|