Dolphin™ 70e Black
with Windows® Embedded Handheld 6.5
Quick Start Guide
70E-WEH-QS Rev B
6/13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know the Dolphin 70e Black
General Notification LED
Front Speaker
Right Scan/
Image Button
WAN Notification
LED
Side
Microphone*
USB Door/
Micro USB
Port
Touch Panel
Display
Back Button
End Button
Scan Button
Home Button
Front
Microphone*
Send Button
Bottom Speaker
* Important - Do not cover the side microphone with your
hand when using the terminal for phone calls or audio
recordings. Both the front and side microphones must
be free from obstruction for the noise cancellation
feature to function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Jack
Image Engine Window (LED aperture)
Power Button
Left Scan/Image Button
Volume Control Button
Color
Camera
Lens
Battery Latch and Retention Strap
(battery and battery door not shown)
Camera
Flash/
Flashlight
I/O Connector
Battery Door
(standard model shown)
SIM Card
Retention Flap
SIM Card Socket
Memory Card Retention Flap
Memory Card Socket
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Battery
Dolphin 70e Black model terminals are designed for use with battery part
numbers BAT-STANDARD-01 (Li-ion 3.7 V, 6.179 watt hour) and
BAT-EXTENDED-01 (Li-ion 3.7 V, 12.358 watt hour) manufactured for
Honeywell International Inc.
The Dolphin 70e Black is shipped with the battery packaged separately from
the terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
!
1
4
2
5
3
6
7
9
8
Note: Standard model battery
and battery door shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
!
Once the battery is installed, connect the terminal to one of the Dolphin 70e
Black charging peripherals to charge the battery.
Charging the Dolphin 70e Black
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery. When using the
70e-USB Charge/Communication cable to charge from a 500mA USB port on
a host device, charge the battery for a minimum of 6 hours for the standard
battery and 8 hours for the extended battery.
Note: Using the terminal while charging the battery significantly increases the time
required to reach a full charge.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
!
Dolphin 70e Black model terminals are designed for use with the following
charging devices and cables: 70e-HB, 70e-CB, 70e-MB, 70e-MC, and the
70e-USB ADAPTERKIT.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
!
HomeBase (Model 70e-HB)
The 70e-HB charger is designed for use with Dolphin 70e Black model
terminals, and battery part numbers BAT-STANDARD-01 (Li-ion 3.7V, 6.179
watt hour) and BAT-EXTENDED-01 (Li-ion 3.7V, 12.358 watt hour)
manufactured for Honeywell International Inc.
Use only a UL Listed power supply, which has been qualified by Honeywell
with output rated at 12VDC and 3 amps with the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
HomeBase Parts
AUX Battery Well
USB Port
2
COMM LED
DC Power
Jack
Dock LED
AUX
Battery LED
Power Adapter
Power Cable
AC Power Cord
HomeBase LED Indicators
AUX battery LED
Orange The auxiliary battery is charging.
Green
The auxiliary battery has completed charging and is ready
for use.
Dock LED
Blue
The terminal is properly seated in the base.
COMM LED
Green
A USB connection is established with the host workstation.
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Charge/Communication Cable (70e-USB ADAPTERKIT)
The USB Charge/Communication cable provides two options for charging the
terminal. Use the cable in conjunction with the provided power supply adapter
and plug adapter to charge the terminal from a power outlet or connect the
cable to a high-power USB port to charge from a host device.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell
with an output rated at 5VDC and 1A with the device.
USB Door
Micro
USB Port
Power
Adapter
Plug Adapter
70e-USB Charge/
Communication Cable
Option 2: Charging from a high-power USB port on a host device
USB
Door
70e-USB Charge/
Communication Cable
Micro USB
Port
Host Device
USB Port
Note: Charging the battery through a USB port takes more time than direct AC
adapter charging. USB charging will not take place if the terminal is drawing
more current than supplied by the USB port.
Touch
> Settings > System > Power to verify the battery is charging.
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Power On/Off
To turn the terminal On, press and release the Power button
To turn the terminal Off:
.
1. Press and hold the Power button
for approximately 4 seconds until
the options menu displays.
2. Touch Power off.
Suspend Mode
Suspend mode automatically turns the touch screen off to save battery power
when the terminal is inactive for a programmed period of time. The automatic
timeout limits are adjustable from the Advance tab located under Settings >
System > Power.
Press and release the Power button
Suspend Mode.
to toggle the terminal in or out of
Note: You should always place the terminal into Suspend mode before removing
the battery.
Removing the Battery
1. Place the terminal in Suspend mode.
2. Perform the steps illustrated below to remove the battery.
1
4
5
3
6
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the SIM Card and/or Memory Card
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD™ or microSDHC™ memory cards with Dolphin terminals for
maximum performance and durability. Contact a Honeywell sales
representative for additional information on qualified memory card options.
To install the SIM Card and/or Memory Card:
1. Place the terminal in Suspend mode.
2. Remove the battery door and battery.
3. Lift the card retention flap for the appropriate socket.
SIM Card
Retention Flap
Memory Card
Retention Flap
4. Slide the SIM or memory card (contacts facing down) into the socket,
then close the retention flap.
Note: Format microSD/SDHC card before initial use.
Chamfered
Corner of
SIM Card
5. Install the battery and battery door. The terminal begins booting as soon
as power is applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation and Function Buttons
Button
Function
Send
Answers a phone call or initiates a phone call.
Home
Returns to the Home screen.
Triggers the scanner/imager in the Scan or Imager
Demo.
Scan
Takes a picture or toggles video capture on or off in
the Pictures & Video Camera application.
Back
End
Returns to the previous screen.
Ends a phone call.
Right &
Left Side
Triggers the scanner/imager.
Volume
Raises or lowers the volume of the active speaker.
Note: Additional functionality varies according to the application in use.
The Dolphin 70e Black has six programmable buttons: Scan, Home, Back,
End and the Right and Left side buttons. You can reassign the buttons to
launch applications or execute commands. Refer to the User’s Guide for
additional information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Virtual Keyboard
The enhanced Honeywell virtual keyboard appears when you open an
application or select a field that requires text or numerical input. You can also
touch the keyboard icon on the tile bar at the bottom of the screen to toggle
the virtual keyboard on or off. The content of the keyboard may vary
depending on the application in use and the input field requirements.
The enhanced virtual keyboard is fully customizable using the Honeywell
Virtual Keypad Creator software available for download at
www.honeywellaidc.com. The user-friendly utility allows you to personalize
multiple keyboard features including key position, size, quantity, color, and
the keyboard skin. In addition, you can make language changes, create
alternate or function keys for special character sets, and add application
launch keys to streamline common business tasks. Refer to the Dolphin 70e
Black User's Guide for additional information.
Using the Color Camera Demo
1. Touch
> Demos
> Camera Demo
.
2. Point the camera lens at the object you want to capture. The camera lens
is located on the back panel of the terminal.
3. Center the object in the touch screen display.
4. Touch
on the screen to take the picture.
Note: Touch the green arrow
Touch the green box
to review or edit your pictures.
to exit the picture review/edit screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Scan Engine Demo
1. Touch
> Demos
> Scan Demo
.
2. Point the Dolphin terminal at the
bar code.
3. Press and hold the Scan button.
The aiming beam appears.
Note: The left and right side buttons also trigger the scan/image engine.
4. Center the aiming beam over the bar code.
Note: For optimum performance, avoid reflections by scanning the bar code
at a slight angle.
5. When the bar code is successfully decoded, the terminal beeps, and the
bar code information appears on the touch screen.
Aiming Beam
The aiming beam is narrower when you hold the terminal closer to a bar code
and the aiming beam is wider when you hold it farther from the bar code.
The aiming beam must be aimed closer to symbologies that have smaller bars
or elements (mil size). The aiming beam must be aimed farther from
symbologies that have larger bars or elements (mil size).
Linear Bar Code
2D Matrix Symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing Data with a Host Device (PC)
To synchronize data (e.g., e-mail, contacts, and calendar) between the
terminal and the host workstation (PC):
®
®
1. ActiveSync (version 4.5 or higher) or Windows Mobile
Device Center (WDMC) must be installed on your PC. You can download
site (http://go.microsoft.com/fwlink/?LinkId=147001).
Note: Dolphin devices ship with ActiveSync already installed. ActiveSync on
your Dolphin terminal works with WDMC on PCs running Windows Vista
or Windows 7 and with ActiveSync on PCs running Windows XP.
2. The Dolphin terminal and PC must be configured for the same
communication type.
3. Connect the terminal to the PC (using a Dolphin peripheral) to initiate
communication.
For additional information on ActiveSync or Windows Mobile Device Center
We recommend use of Honeywell peripherals, power cables, and power
!
adapters. Use of any non-Honeywell peripherals, cables, or power adapters
may cause damage not covered by the warranty.
Software Upgrades
Contact a Honeywell technical support representative for information on
available software upgrades for your Dolphin terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the terminal
There are three types of system resets: a soft reset, a hard reset, or a factory
reset. The soft and hard resets preserve all data stored in the file system.
Contact a Honeywell technical support representative for more information on
how to perform a factory reset.
A Soft Reset (Warm Boot) re-boots the device and preserves any objects
created in RAM. You would perform a soft reset when: the terminal fails to
respond, after installing some software applications, or after making changes
to certain system settings, such as network cards.
A Hard Reset (Cold Boot) re-boots the terminal and closes any open
applications running in RAM at the time of the reset.
To perform a Soft Reset or Hard Reset:
1. Press and hold the Power button
approximately 4 seconds until the
options menu appears.
2. Touch Soft Reset or Hard Reset on the menu. When the reset is
complete, the Home screen displays.
Note: To perform a Hard Reset if the touch screen has stopped responding, press
and hold the Power button
for approximately 8 seconds until the terminal
starts to re-boot. When the reset is complete, the Home screen displays.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Assistance
Contact information for technical support, product service, and repair can be
User Documentation
For localized versions of this document, and to download the User’s Guide,
Limited Warranty
warranty information.
Patents
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
© 2013 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|