4600g, 4600r, 4600rp, 4800i
Quick Start Guide
查看繁体版请登陆 www.honeywellaidc.com
2D-02-QS Rev E
1/12
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Connection
Keyboard Wedge Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial (RS-232) Connection
Reading Techniques
The view finder projects an aiming
beam that should be centered over
the bar code, but it can be
positioned in any direction for a
good read.
Hold the scanner over the bar code,
pull the trigger, and center the
aiming beam on the bar code.
The aiming beam is smaller when
the scanner is closer to the code and larger when it is farther from the
code. Hold the scanner close to smaller bar codes, and farther away
from large bar codes to get a proper read.
If the bar code is highly reflective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard Product Defaults
The following bar code resets all standard product default settings.
Standard Product Defaults
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface
Scan the bar code that describes the PC or interface you are using.
USB Keyboard (PC)
RS-232
Japan DOS/V
USB Japanese Keyboard (PC)
AT/PS2 Keyboard Wedge
(Default)
Emulate External Keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Country
Scan the Program Keyboard Country bar code below, then scan
the numeric bar code(s) from the back of this sheet, then the Save
bar code to program the keyboard for your country. As a general
rule, the following characters are not supported by the scanner for
countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~.
Program Keyboard Country
Country Code
Belgium
Scan Country Code
Scan
1
8
2
3
4
7
Italy
5
Denmark
Norway
9
Finland
Spain
10
6
France
Switzerland
USA (Default)
Germany/Austria
Great Britain
0
Save
Note: For a complete list of country codes, see the User’s Guide for
Download from Www.Somanuals.com. All Manuals Search And Download.
Trigger
The following bar codes will allow you to use the reader in Manual
Trigger mode (need to press the trigger to read) or Presentation
mode (the reader is activated when it “sees” a bar code).
Manual Trigger
(Default)
Presentation Mode
Streaming Presentation™
Note: Streaming Presentation Mode applies only to units with the
Advanced Illumination feature. Units with the advanced
illumination feature have a software revision of 31205480-118
or newer.
When in Streaming Presentation mode, the imager leaves the scan
illumination on all the time and continuously searches for bar codes.
Streaming Presentation Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Reread Delay
This sets the time period before the scanner can read the same bar
code a second time. Setting a reread delay protects against
accidental rereads of the same bar code.
Medium Reread Delay
Suffix
If you want a carriage return after the bar code, scan the Add CR
Suffix bar code. To add a tab after the bar code, scan the Add Tab
Suffix bar code. Otherwise, scan the Remove Suffix bar code to
remove the suffixes.
Add CR Suffix
Add Tab Suffix
Remove Suffix
Download from Www.Somanuals.com. All Manuals Search And Download.
Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Add Code ID Prefix To All Symbologies
(Temporary)
Note: For a complete list of Code IDs, see the User’s Guide for your
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the imager transmits the function code to the
terminal. Charts of these function codes are provided in your User’s
Guide. When the imager is in keyboard wedge mode, the scan code
is converted to a key code before it is transmitted.
Enable
(Default)
Disable
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
1. Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any bar code type
5. Length: scan 9999 for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan Save to save your entries.
Enter Data Format
Clear All Data Formats
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Chart
0
2
4
6
1
3
5
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9
B
D
F
A
C
E
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Xpress™
To obtain access to additional features for the imager, use Visual
complete download instructions and descriptions of Visual Xpress
features, refer to your User’s Guide.
Technical Assistance
Contact information for technical support, product service, and repair
Limited Warranty
product’s warranty information.
User Documentation
For localized versions of this document, and to download the User’s
Patents
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
Download from Www.Somanuals.com. All Manuals Search And Download.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
© 2008-2012 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|