AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HW70-B1486-F
HW70-B1286-F
HW80-B1486-F
HW80-B1286-F
Heavy
l
Heavy
r
Delicate
Wash
Temp.
Silk
Sport wash
Silent
Wool
Rinse
Speed
Auto
Synthetic
Memory
Cotton
Quick
Power
Spin
Spin
Self-clean
Start/Pause
Strong wash
Delay
Pre-wash
Soak
Press and hold 2seconds
to set door unlocked
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
COMPONENTS
THANKS FOR PURCHASING A HAIER PRODUCT
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
ACCESSORIES
Check the accessories and literature
in accordance with this list:
1x Inlet hose assembly
1x User manual
1x Bottom Cover
AUTOMATIC DRUM WASHING MACHINE
1x Drain hose bracket
Heavy
Delicate
W
a
s
h
T
e
m
p
.
Silk
Sport wash
Silent
Wool
Rinse
Speed
Auto
Synthetic
Memory
Cotton
Quick
Spin
Power
Spin
Self-clean
S
t
r
o
n
g
w
a
s
h
Delay
Pre-wash
Soak
Start
/
Pause
Press and hold 2seconds
to set door unlocked
4x Blanking plugs
Download from Www.Somanuals.com. All Manuals Search And Download.
04
PREPARATION
PREPARING THE MACHINE
Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon
opening the package, water drops may be seen on the plastic bag and the porthole. This is normal
phenomenon resulting from water tests in the factory.
DESCRIPTION
This diagram may be slightly different from the layout of the washing machine you have just
purchased due to technical improvements.
Control panel
Power
Work top
Washer door
Door handle
Detergent distribution drawer
Drain hose
Water inlet valve
Power cord
Back cover screws
Back cover
Filter cover
Transportation bolts
Heavy
Delicate
Wash
Rinse
Temp.
Speed
Auto
Silk
Sport wash
Silent
Wool
Synthetic
Memory
Cotton
Quick
Power
Spin
Spin
Self-clean
Start/Pause
Strong wash
Delay
Pre-wash
Soak
Press and hold 2seconds
to set door unlocked
T4
T3
S1
S4
S2
T2
T1
S3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
SAFETY INSTRUCTIONS
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DO ...
DO NOT ...
... Touch or use the appliance when barefoot or with wet or
damp hands or feet.
... Make sure that the transport bolt are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
appliance.
... Remove or insert the plug in the presence of flammable
... Allow children or infirm persons to play with the appliance
gas.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and refix. Do not use the washing machine until the
hoses are properly fixed.
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or furniture.
DURING DAILY USE OF THE APPLIANCE
DO ...
DO NOT ...
... Pull up zips and fix loose threads to prevent the items
... Touch the washer door during the washing process - it
from being entangled. If necessary, put small items into a net bag gets hot!
or pillow.
...Place heavy objects or sources of heat or damp on top
... Turn off the machine after each wash program and
switch it off at the mains to save electricity and for safety. Wipe
clean the lower part of the porthole.
of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
... Keep the door slightly open when the washing machine cycle.
is not in use to prevent formation of odours.
... Force the washer door open. The door is fitted with a
... Let the power cord be replaced by the manufacturer, his self-lock device and will open shortly after the washing procedure
service agent or other accordingly qualified persons, in case it is
damaged.
... Ensure that the appliance is not used by persons
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by a
person responsible for their safety.
is ended.
... Open the washer door if the water level is visibly over
the porthole.
... Cover the washing machine with plastic cover so that
inside dampness cannot be kept in.
... Supervise children to ensure that they do not play with
the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
DISMANTLE THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
1. Remove the back cover.
2. Remove the four bolts on the rear side and take out the synthetic
stabilisers from within the machine.
3. Replace the back cover.
4. Fill the holes left by the bolts with blanking plugs.
Note:
1.When you replace the back cover,the convexity must face
to outside, and you have to insert the back cover from the
two gaps as shown in fig.5.
2.Keep the transportation bolts and synthetic stabilisers
in a safe place for later use.
5.
ADJUSTING THE WASHING MACHINE
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also
reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as
stable and flat as possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
07
BEFORE USE
INLET HOSE
1. Connect the nut on the inlet hose to the connector on the water
valve.
2. Apply inlet hose to a water tap with cold, fresh water.
Note: Use the hose-set supplied with the appliance. Old
hose-sets should not be reused.
2.
1.
DRAIN HOSE
1. Use the drain hose bracket to keep the end of the drain hose retained
and prevent the outflow of water. Don't extend the length of the drain
hose; if an extended hose is required, please consult a serviceman.
1.
2. The height of the drainage outlet must be 80-100 cm. Fix the drain
hose to the clip at the back of the washing machine to prevent it from
dropping off.
2.
Note: The drain hose should not be submerged in water
and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a
height of less than 80cm, the washing machine will continuously drain while being filled (self-siphoning).
CONNECTING TO THE POWER SUPPLY
Before connecting to the power supply, check:
¬ The socket is adequate for the maximum power of the washing machine
(For safety, fuses in the power circuit should be rated for no less than 15A).
¬ The voltage should meet the requirement.
¬ The power outlet should be capable of accepting the washing machine plug.
¬ Connect the machine to an earthed socket outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL
I HG
EDC
A
J
F
B
M1
Cotton
Daily Wash
M2
Wash
Rinse
Spin
Temp.
Speed
Synthetic
Mix3
Sport 25'
Express15'
Jeans
Power
Delicate
Wool
Baby Care
R
Hand Wash
Start/pause
Spin/Drain
Intense
End Delay
Prewash
Rinse Hold
K L M
N
O
Intense washing button
End Delay Button
Display screen
Times of rinse
M emo button
Rinse Hold button
Washing temperature button
Detergent distribution drawer
¬ Power
Switch
_ Press this button to switch on the washing machine. Press it again to switch it off.Press On/Off button gently for
finishing the program. It will change to power off station if there is no operation on the button and none will be shown.
The "End" sign will appear on the display after
M emo
This function could be used under the programmes cotton/Synthetic/Mix. After choosing one of these, the user can
set washing time washing temperature rinse times spin speed spin time and choose some additional
function such as Intense/Delay/Prewash/Rinse hold according as her need or habit Finish them then keep pressing
“memo” button for 2 seconds, the display screen will show the corresponding number ( 1 stands for the programme have
been setting under cotton; 2 stands for the programme having been setting under synthetic; 3 stands for the programme
having been setting under Mix) . It means the programme choosing by users have been saved. Next time ,when user choose
one of these Cotton/Synthetic/Mix, then press “Memo” ,the corresponding programme having been saved will be called out,
press “Start/pause” button to perform this programme. Also, the setting programme can be used many times until the user
set a new one, the previous programme will be covered.
¬ Washing _ Press the “Temp.” button to select heating temperature (--, 30, 40, 50, 60, 90). The maximum allowable
temperature heating temperature varies with programs.
button
Note:“--” in the temperature display indicates non-heated washing.
Download from Www.Somanuals.com. All Manuals Search And Download.
F
Display
screen
_Display washing time, remaining time, times of rinsing, spinning time, temperature setting value, speed setting
value, child lock state, door lock state, washing progress and alarm message, etc.
Washing time
G
Press the “Wash” button to set washing time. Press and hold this button to change the time continuously. Click this
button up until the end.
Note: This function is not applicable to “ Spin/Drain ” process
Times of rinse
Spinning time
H
I
Press the “Rinse” button to select the times of rinsing and the maximum allowable times of rinsing is 8.
Press the “Spin” button to select spinning time. The maximum allowable spinning time varies with programs.
J
¬ Detergent _Open the drawer, three compartments can be seen:
distribution Compartment 1: Prewash detergent
2
2
3
1
drawer
Compartment 2: Detergent for programs 1 to 10.
1
Compartment 3: Softener, conditioning agent, perfume, etc.
The recommendation on the type of detergents is suitable for the various washing temperatures,
please refer to the manual of detergent.
Intense wash- Press "Strong wash" button to increase the washing time during the main washing stage of
K
L
ing button
selected program.(This feature is applicable for dirty clothes ) The illuminated icon indicates the “strong wash”
function is selected. This additional function applies to “cotton”, “memory”, “synthetic” ,“Silent” “heavy”and
“Sport wash” programs only. This button is effective before starting a program.
¬End Delay Press the “Delay” button and the illuminated icon indicates that the “delay” function is selected. The delay time
Button
(0.5-24h) increases by 30 minutes each press of “Delay” button. The time will change continuously if you press
and hold this button until you release it. The delay time is the end time of washing. For example, 6:00 means the
washing ends after 6 hours (the delay time must be longer than the program’s running time). The “Delay” function
is not available for “Spin” and “Self-clean” programs.
Note:The delay time must be longer than the program time;otherwise,the washing machine
will start the wash program directly.
Pre-wash
button
Press the “Pre-wash” button to select or cancel the prewash program. The prewash program can be selected
for washing heavily soiled clothes. Press the “Prewash” button, the “Pre-wash” icon will illuminate. Press the
“Pre-wash” again, the prewash function will be cancelled and the “Pre-wash” icon will go out. When selecting the
prewash function, add a proper amount of detergent into the prewash box, otherwise do not add any detergent
into the prewash box. This additional function applies to “cotton”, “memory”, “synthetic” and “Sport wash”
programs only
M
N
Rinse Hold
button
Press "Rinse Hold " button to startup/shutdown the crease-resistant and soak function. When the process runs to the last
rinse, the washing machine is not going to drain, clothes will be soaked in water, and the soak icon flashes, the remain
Rinse Hold"button or “start /pause”button,
time not decreasing. If you need to continue the process, you can press "
then the icon will be off to cancel this function, and the washing machine continue to work. This feature and the
"End Delay"button can not be chose at the same time. Also this feature is only effective in the “cotton”,
“synthetic”, , “Delicate”, “Sport 25‘ ”, “Jeans” process.
¬ Start/
_ Press the “Start/pause” button, the washer will start and the indicator light remains on. If this button is pressed
O
Pause Button when the washer is in operation, the washer will pause and the indicator light will flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM SELECTION
USING THE APPLIANCE
PROGRAM MODES
2 2
1 Detergent compartment for prewash mode
2
3
1
2 Detergent compartment
1
3 Compartment for softener and
other additives
Temperature
Maximum Preset
Recommended
Laundry
Preset spin speed
Program
2
3
1
1
2
3
¬ Hand Wash - - to 40 °C 30°C
Cotton fabrics
Woolen fabrics
Cotton fabrics
800 rpm
600 rpm
800 rpm
¬ Wool
- - to 40 °C 30°C
- - to 40 °C 30°C
¬ Delicate
40°C
40°C
4
5
¬ Mix
- - to 40 °C
1000 rpm
1000 rpm
Cotton or synthetic
Chemical fiber
fabrics
¬ Synthetic - - to 60 °C
¬Cotton
6
7
8
- - to 90 °C 60°C
1000 rpm
1000 rpm
Cotton fabrics
Cotton fabrics
Sports wear
¬ Daily Wash - - to 60 °C 40°C
¬ Sport 25’ - - to 40 °C 30°C
800 rpm
800 rpm
1000 rpm
--- ---
9
¬ Express 15‘ - - to 40 °C
Cotton or synthetic
40°C
- - to 60 °C
- - to 90 °C
10 ¬ Jeans
11 ¬ Baby Care
Jeans
Cotton or synthetic
1000 rpm
1000 rpm
80°C
¬ Spin/Drain
12
None
Yes
No
Optional
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE APPLIANCE
CONSUMPTION AND TECHNICAL DATA
CONSUMPTION TABLE
SPIN DRYING PERFORMANCE
HW*-1286-F/HW*-1486-F
MAX. LOAD
HW70-*86-F/HW80-*86-F
TEMPERATURE
WASHING TIME
PROGRAM
¬ Hand Wash
¬ Wool
2kg/2 kg
0:38
0:35
0:38
Auto
30°C
30°C
30°C
40°C
40°C
60°C
40°C
30°C
-- --
2kg/2 kg
2kg/2 kg
¬ Delicate
¬ Mix
5kg/5 kg
3.5kg/4 kg
7kg/8 kg
Auto
¬ Synthetic
¬Cotton
53%/51%
Auto
3.5kg/4 kg
3.5kg/4 kg
2kg/2 kg
0:41
0:25
0:15
0:58
1:53
0:08
¬ Daily Wash
¬ Sport 25’
¬ Express 15‘
¬ Jeans
40°C
80°C
/
3.5kg/4 kg
3.5kg/4 kg
/
¬ Baby Care
¬ Spin/Drain
The standard 60 °C and 40 °C cotton programmes are suitable to clean normally soiled cotton laundry and they are the most efficient
programmes in terms of combined energy and water consumptions for washing that type of cotton laundry;The actual water temperature
may differ from the declared cycle temperature;
TECHNICAL DATA
HW80-B1286-F/HW80-B1486-F
HW70-B1286-F/HW70-B1486-F
220 - 240V~/50Hz
Power source
220 - 240V~/50Hz
10
0.03≤P ≤1
8
Max. working current (A)
Water pressure (MPa)
Nominal load (kg)
10
0.03≤P ≤1
7
1200/1400
12
Spinning speed (r/min)
Washing programs
1200/1400
12
2000
Max power (W)
2000
x
x
x
x
Dimensions (HxDxW mm)
850 600
850 650
595
595
70
74
Net weight (kg)
Power consumption of the
off-mode(W)
0.39
0.39
Power consumption of the
left-on mode(W)
0.39
0.39
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHING METHODS
USING THE APPLIANCE
PLEASE NOTE
This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee
will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the
instructions given on the label of each garment and wash only machine-washable garments.
POWER SUPPLY
Connect the washing machine to the power supply (220V to 240V~/50Hz).
WATER CONNECTION
Turn on the tap. The water must be clean and clear.
Note: Before use, check for leakage in the joints between the tap and the inlet hose
by turning on the tap.
PREPARING THE LAUNDRY
¬ Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are.
¬ Separate white clothes from coloured ones. Wash them first by hand to check if they fade or run.
¬ Empty pockets(clips,coins,keys,etc.)and remove the harder decorative objects(e.g. brooches) to avoid
them entrying the drain pump and blocking.
Attention: Small parts (like buttons, etc) may lead to repair work which user has to
pay by themselves and can cause damage in the machine.
¬ Garments without hems, underwear, finely woven textile such as fine curtains are to be put into wash
bag (it is better not to wash them in a washing machine).
¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as
socks, belts, bras, etc. in the wash bag.
¬
Unfold large pieces of fabric such as bed sheets, bedspreads, etc.
¬ Turn shirts inside out.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
USING THE APPLIANCE
Heavy
Delicate
LOADING THE MACHINE
Wash
Rinse
T
emp.
Silk
Sport wash
Silent
Wool
Speed
Auto
Synthetic
Memory
Cotton
Quick
Power
Spin
Spin
Self-clean
Start
/
Pause
Strong wash
Delay
Pre-wash
Soak
Press and hold 2seconds
to set door unlocked
Open the washer door, put in the laundry piece by piece. Close the door tightly.
¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry
from being tainted by oil or dirty water from the washing machine. Before washing you should run the
machine without laundry, but with detergent, with 60°C programm.
¬ Do not overload the washing machine.
SELECTING DETERGENT
The washing efficiency and the performance is determined by the quality of detergent used. Special
non-foaming detergent produces good washing results. Use specific detergents for synthetic and woollen
goods. Do not use dry cleaning agents such as trichloroethylene and similar products.
Note: Do not add more detergent than needed; otherwise, it may cause the situations as following and wash-
ing machine malfunction impacting washing machine’s life.
1.Due to the increasing foam, the rinse time will be longer than normal;
2.The foam may overflow from the detergent drawer because of the increasing pressure of the foam;
3.It may remain foam without cleaning out after the final spinning cycle.
Recommendation:
1.Clean the detergent drawer once a week.
2.When using the prewashing program, please add half of the rating dosage.
3.Please follow the dosage recommendation on the powder or liquid detergent package.
ADDING DETERGENT
Slide out the detergent drawer and put the required detergent and softening agent into the corresponding
compartments. Push back the drawer gently. (Refer to the instructions on the drawer)
2
2
3
1
Caution:
1
¬ For prewashing program, detergent should be added to both compartments 1 and 2.
For other programs, do not add detergent to compartment 1.
¬ Add liquid detergent to the main drawer,and dilute it first if it is concentrated .Do not
overuse detergent;otherwise, it will damage the artificial fibers.so,please follow the instructions on the detergent
package. Do not use liquid detergent if the pre-wash mode or "End delay" is selected.
¬ Do not overuse softener; otherwise, it will damage the artificial fibers.
SELECTING PROGRAM
M1
Cotton
Daily Wash
To get the best washing results, an appropriate washing program should be
selected according to the laundry type. Please turn the program knob to
select the right program.
M2
Wash
Rinse
Spin
Temp.
Speed
M emo
'
Synthetic
MixM3
Sport 25
Power
Express15
'
Delicate
Jeans
Wool
R
Bab
y
Care
Hand Wash
Start/pause
Spin/Drain
Intense
End Delay
Prewash
Rinse Hold
SELECTING FUNCTIONAL
Select the required options. (Refer to the "Control panel" pages 08 and 09)
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE APPLIANCE
CotonM1
Quotidien
Temp.
Temp
SynthétiqueM2
MixteM3
Sport 25'
Express15'
Jeans
Lavage
Lavage
Marche
/
Arrêt
SETTING WASHING TEMPERATURE
Vitesse
Vitesse
Rinçage
Rinçage
Délicat
Laine
Power
Bébé coton
M
emo
emo
Essorage
Essorage
M
Lavage
main
Essorage
Vidange
Départ/Pause
Intense
Fin différée
Prélavage Arrêt cuve pleine
Press and hold down the temperature button until the desired temperature is selected .
CotonM1
Quotidien
SETTING SPIN SPEED
Temp.
Temp.
SynthétiqueM2
MixteM3
Sport 25'
Express15'
Jeans
Lavage
Lavage
Marche
/
Arrêt
Vitesse
Vitess
Rinçage
Rinçage
Délicat
Laine
Power
Bébé coton
M
emo
emo
Essorage
Essorage
M
Lavage
main
Essorage
Vidange
Press and hold down the speed button until the desired speed is selected.See "Opera-
tional functions" on the "Control panel" pages (08 and 09) for selecting temperature
and spin speed. It is advisable to select the recommended value.
Départ/Pause
Intense
Fin différée
Prélavage Arrêt cuve pleine
CotonM1
Quotidien
Temp.
Temp.
SynthétiqueM2
MixteM3
Sport 25'
Express15'
Jeans
Lavage
Lavage
Marche
/
Arrêt
WASHING
Vitesse
Vitesse
Rinçage
Rinçage
Délicat
Laine
Power
Bébé coton
M
emo
emo
Essorage
Essorage
M
Lavage
main
Essorage
Vidange
Départ/Pause
Intense
Fin différée
Prélavage Arrêt cuve pleine
Press the Start/Pause button. The washing machine will operate according to the
preset programs. The washing machine will stop operation automatically when a
washing cycle ends. The "End" sign will appear on the display. Open the washer door
and take out the laundry.
Heavy
Delicate
Wash
Rinse
T
emp.
Silk
Sport wash
Silent
Wool
Speed
Auto
Synthetic
Quick
Power
Memory
Cotton
Spin
Spin
Self-clean
Start/Pause
Strong wash
Delay
Pre-wash
Soak
HW60-B1286
Press and hold 2seconds
to set door unlocked
AFTER WASHING
Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of
moisture and odours. Let the door open while not used.
TIPS FOR SAVING ENERGY
1. Collect clothes for one full wash load.
2. Avoid overloading the washing machine.
3. Prewash only heavily soiled clothes.
4. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes.
5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower
temperature than 60°C. Only use higher temperature than 60°C for heavily soiled laundry.
6. Follow the dosage recommendation on the detergent package to avoid using too much detergent.
WARM TIPS:
To add clothes during washing or want to remove clothes due to extended power failure,make sure
that the water level in the drum is properly below the lower edge of sight glass, the water temperature
is below 50 C and the inner drum is not running, then remove the drain pipe from its support and lower
it until no water is drained from the drain pipe, replace the drain pipe. Open the filter door at the bottom
of the washer, and you will see a pull pole. Take out the pull wire and gently pull it downwards until you
hear a low sound, the door will open, now you can add or remove the clothes. Afterwards, reset the pull
pole and filter door.
Pull pole
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE APPLIANCE
CARE CHART
Resistant material
Delicate fabric
Bleachable in cold water
Do not bleach
Don't dry clean
Dry flat
Washable at 95 °C
Washable at 60 °C
Washable at 40 °C
Washable at 30 °C
Hand wash
Iron at 200 °C
Hung to dry
Iron at 150 °C
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Don't tumble dry
Iron at 100 °C
Don't iron
Dry cleaning with any solvent
Dry cleaning with pericloride
Dry cleaning with aviation fuel
Dry clean only
Wool Seal
LOAD REFERENCE
Bed sheet (single)
Blanket
Cotton
Approximately 800g
Wool
Approximately 3000g
Approximately 800g
Approximately 800g
Approximately 800g
Approximately 950g
Approximately 200g
Approximately 300g
Approximately 50g
Approximately 300g
Approximately 70g
Blended fabric clothes
Jackets
/
Cotton
Jeans
/
Overalls
Cotton
Ladies Pyjamas
Shirts
/
/
Socks
Blended fabrics
Cotton
T-Shirts
Underwear
Blended fabrics
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & CARE
NE
AFTER WASHING
Turn off the water supply and pull out electricity plug after each wash.
Open the washer door to prevent formation of moisture and odours. If
the washing machine is left idle for a long period, drain the water in
the machine and replace the drain hose.
1.
2.
CLEANING THE DETERGENT DRAWER
1.
Clean the detergent distribution drawer regularly.
Swing out the drawer, flush it clean with water and then replace it.
2.
CLEANING THE MACHINE
Unplug the machine during cleaning and maintenance. Use a soft cloth
dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.
CLEANING THE FILTER
Clean the filter once a month:
1. Open the bottom cover.
2.Remove the filter by turning counterclockwise.
1.
3.Flush the filter clean with running water.
4.Replace the filter by turning clockwise and
remount the cover.
2.
Caution:
1.The filter must be in place, or it may lead to leakage.
2.Place a container under the drain pump filter, to collect
any excess water that may come out of the drain pump
when the filter is removed.
3.
4.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
WATER INLET VALVE AND INLET VALVE FILTER
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and
inlet valve filter regularly.
MOVING THE MACHINE
If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as
shown below.
1. Remove the back cover.
2. Remove the blanking plugs.
3. Insert the synthetic stabilisers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.
LONG PERIODS OF DISUSE
If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to
prevent formation of moisture and odours. Let the door open while not used.
Heavy
Delicate
Wash
Rinse
T
emp.
Silk
Sport wash
Silent
Wool
Speed
Synthetic
Memory
Cotton
Quick
Power
Spin
Spin
Auto
Self-clean
Start
/
Pause
Strong wash
Delay
Pre-wash
Soak
HW60-B1286
Press and hold 2seconds
to set door unlocked
Download from Www.Somanuals.com. All Manuals Search And Download.
18
DISPLAY CODES
MAINTENANCE
DISPLAY CODES AND SPECIAL FUNCTIONS
CODES
CAUSES
SOLUTIONS
Err1
Err2
¬ Door is not properly shut.
¬ Drainage error, water not emptied within 6
minutes.
_ Shut the door properlyˈand then press the Start/Pause button.
_ Clean the filter and check the drain hose for blockage. If error
still exists, please contact the maintenance personnel.
Err3
¬ Temperature sensor not properly connected or
damaged.
_ Contact the maintenance personnel.
Err4
Err5
¬ Heater error (Appears at the end of a cycle).
¬Water level not met in 8 minutes.
_ Contact the maintenance personnel.
_ Make sure that tap is turned on, and water pressure is normal.
If problem still exists, please contact the maintenance personnel.
_ Install drain hose within 80-100 cm of height.
_ Make sure the drain hose is not in water.
¬The height of the drain hose is below 80 cm.
¬ The drain hose is in water.
¬ Motor error.
Err7
Err8
_ Contact the maintenance personnel.
_ Contact the maintenance personnel.
¬ Water exceeds protective level.
¬ The signal of Water level sensor is wrong.
Er10
_ Contact the maintenance personnel.
_ Contact the maintenance personnel.
EuAr
¬ The PBC and the motor cant’t communicate.
End
¬ End of wash cycle.
1:25
¬The remaining time is 1 hour 25 minutes.
19:30
UNb
¬Status information:Preset time for delayed operation.
After the last rinsing cycle finishes,spinning fails completely due to unbalance of the laundry.
¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a program.
It can no longer be changed by operating buttons or knobs. To unlock press the "Delay" and "Start/Pause" buttons again for 3
seconds.
¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the present
settings will be saved and the preset operation will resume when the power is on again.
¬ To cancel a program
Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector
again to choose another program.
Note: During the spin process, if too much foam is inspected, in order to protect the motor, the washing machine will eliminate the
foam automatically; the motor will stop and the drain pump will drain the water continuously for 90 seconds. If it happens more than
3 times, the motor will stop until the end of cycle without spinning.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
MAINTENANCE
TROUBLESHOOTING
TROUBLESHOOTING
The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed.
PROBLEM
CAUSES
SOLUTIONS
Washing machine fails to
operate.
¬ Poor connection to the power supply.
¬ Power failure.
_ Check connection to the power supply.
_ Check the power supply.
¬ The washer door is not properly closed.
¬ Machine has not been switched on.
_ Close the washer door properly.
_ Make sure the machine is switched on.
Washing machine cannot be ¬ The "Start/Pause" button is not pressed.
_ press the "Start/Pause" button.
_ Turn on the water tap.
filled with water.
¬ Water tap is not turned on.
¬ Water pressure is less than 0,03 Mpa.
¬ The inlet hose is kinked.
_ Check water pressure.
_ Check the inlet hose.
¬ Water supply failure.
_ Ensure the water supply.
_ Set the program knob properly.
_ Close the washer door properly.
_ Unblock the inlet hose filter.
¬ The program knob is not properly set.
¬ The washer door is not properly closed.
¬ The inlet hose filter is blocked.
Machine is draining while
being filled.
¬ The height of the drain hose is below 80 cm. _ Install drain hose within 80-100 cm of height.
¬ The drain hose is in water.
_ Make sure the drain hose is not in water.
Drainage failure.
¬ Drain hose is blocked.
_ Unblock the drain hose.
¬ Drain hose end is higher than 100 cm above _ Make sure the drain hose end is lower than
the floor level.
¬ The filter is blocked.
100 cm above floor level.
_ Unblock the filter.
Strong vibration while
spinning.
¬ Not all transportation bolts have been removed. _ Remove all transportation bolts.
¬ Washing machine is located on an uneven
surface or is not level.
_ Make sure the washing machine is on
an even surface and levelled.
¬ Machine load is over Max load.
_ Reduce amount of laundry in the drum.
Operation stops before
completing wash cycle.
¬ Water or electricity failure.
_ Check the power supply.
Operation stops for a period ¬ Washing machine gives an error message.
_ Check display codes.
_ Press the rinse hood button or the Start/pause
button again to cancel it.
of time.
¬ Washing machine is in soaking cycle?
Excessive foam in the
¬ The detergent is not a low-foaming type or for _ Check if your detergent is appropriate.
drum, which is spilled to the manual wash.
distribution drawer. ¬ Excessive use of detergent.
_ Reduce amount of detergent in the distribution
drawer.
Automatic adjustment of the ¬ The washing program duration will be adjusted _ This is normal and doesn't affect the
washing time.
functionality.
Spinning fails
¬ Unbalance of the laundry
_ Add clothes or run a spinning program again.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
|