L26M9/L32M9/L42M9/L46M9/
L55M9/LB26R3/LB32R3/
LB42R3/LB46R3/LP55R3
Please READ thismanual carefully beforeoperating your TV, and retainit for futurereference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Control and Rear Terminals Control
Panel Control
26”/32”/42”/46”
55”
S-VIDEO jack
Rear Terminals Control
26”/32”/42”/46”
55”
ANT.
ANT.
2
2
1
1
1
1
HDMI3
HDMI3
CONMPENT
CONMPENT
VIDEO
AUDIO
AUDIO
VIDEO
VGA/DVI AUDIO
VGA/DVI AUDIO
VGA IN
VGA IN
3
8
7
7
3
8
7
7
7
5
6
6
4
4
5
1.COMPONENT In Connect a component Video/Audio device to these jacks
2.VGA/DVI AUDIO Connect a VGA/DVI Audio device to these jacks
3.VGA IN: Connect the monitor output connector from a PC to the jack
4.AV1 In Connect Video/Audioout from an Video/Audio device to these jacks
5.S-VIDEO Connect S-Video out from a S-Video device to these jacks
6.AV OUT Video/Audio output terminal
7.ANT In Connect cable pr antenna signal to the TV, either directly or through your cable box
8.HDMI Connect a signal to HDMI
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.POWER: Press thiskey to startTV from standby
mode, press itagain to returnto standby mode.
2.USB: Press thiskey for quickswitching of streamingmedia.
3.H. LOCK: Referto the FunctionalDescription on Page23.
4.Press this keyto open/close signalsource options menu.
5.DSMB Press this keyfor quick switchingof MO-Card.
6.STILL: Press thiskey to freezethe image. Pressit again
to return tonormal screen. (Note:Do not displaya still
picture for along time toprevent the screenfrom burns.)
7.ARC: Press thiskey to selectthe screen displayproportion.
8.MUTE: Press thiskey to mutethe sound, pressit again to
activate the sound. The sound maybe activated byturning
the TV onagain or increasingthe volume.
1
2
USB
3
4
SOURCE
H.LOCK
STILL
ARC
.,@
abc
jkl
def
ghi
mno
9.0-9: These keysare used toselect a channel.
10.Q. VIEW: Pressthis key toreturn to theprevious TV
program(only work inthe TV mode).
11.VOL+ /-:Used to adjustthe volume whenthe screen
menu is closed.
pqrs
MUTE
tuv
wxyz
Q.VIEW
12.CH+/-: Used toselect a TVchannel when thescreen
options menu isclosed, specifically,press CH- to
decrease the channeland press CH+to increase the
channel.
* #
10
8
13.Sound Mode: Pressthis key continuouslyto select the
sound mode.
14.Picture Mode: Pressthis key continuouslyto select the
picture mode .
11
13
S.MODE
P.MODE
P
15.TV.MENU: Press this keyto display orexit the mainmenu.
16.D.MENU: Press thiskey to displaythe Special Function
Menu (it functionswhen special modulesare inserted).
17.THUMBSTICK (Up/Down/Left/Right)
18.OK: Press thiskey to confirmthe selection.
19.Clears all on-screendisplays and returnsto TV viewing
from any menu.
TV.MENU
D.MENU
15
17
OK
20.USB Control theUSB System.
Backward
Forward
Play/Pause BACK: Back
REC: no available ZOOM: Press tomagnify/minify an image
D.CALL: Press todisplay program information.
21.TV.CALL: Display on/off
22.no available
EXIT
BACK
REC
19
REV
PLAY/PAUSE
23.no available
24.no available
25.no available
26.no available
27.no available
28.no available
29.no available
30.no available
31.Press this keyto display thefavorite program listmenu.
32.no available
33.Displaying the sleeptime.
34.no available
35.no available
ZOOM
D.CALL TIME SHIFT TV.CALL
21
22
VOD
AUDIO
INFO
GUIDE
PAGE+
PAGE-
23
24
25
26
TV/FM
CH.LIST
27
28
29
30
FAV
Fn
STOCK
DDS
INTERACTION
GAME
SLEEP
33
34
37
31
32
35
BUSINESS
38
36
36.no available
37.no available
38.no available
Note: From 22 to 38(except 31 and 33), are belonged to DSMB function button.
It will act when the module installed only. Pls refer to DSMB user's manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
AT.
Download from Www.Somanuals.com. All Manuals Search And Download.
ANT.
SOURCE
HDMI3
CONMPENT
AUDIO
VIDEO
VGA/DVI AUDIO
VGA IN
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI3
CONMPENT
AUDIO
VIDEO
VGA/DVI AUDIO
VGA IN
• ••
VGA/DI IO
VGA IN
SOURCE
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI3
CONMPENT
AUDIO
VIDEO
VGUDIO
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. First, connect power cord correctly and the power indicator will light.
2. Press POWER on the remote control again.
3. If you want to exchange to standing by status, please press down POWER on the
remote control.
4. Disconnect the power supply or unplug the television if it is intended to completely
cease the television performance.
When you satisfied with your set for the first time, you must select the language which
will be used for displaying menus and indications.
menu
1. Press MENU and
/
to select Function menu.
Language
English
On
15s
Blue Screen
Menu Timeout
AAA Picture Optimize
DSM
2. Press / to select the Language.
Demo Off
Eye Guard Mode
Tetris
3. Select a particular language by pressing repeatedly.
4. When you satisfied with your choice, press MENU to
return to normal viewing.
If the TV is not in TV mode, press SOURCE on the
remote control unit, and signal source menu will be
displayed on theTV screen (as shown inthe right figure).
Source
TV
AV1
Press
/
to select theTV option, and press or OK to
confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at
the upper right corner of screen displays the information
of current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
AV2
S-Video
YPbPr/YCbCr1
YPbPr/YCbCr2
HDMI 1
HDMI 2
HDMI 3
In case of no other operation, the signal source menu
will automatically disappearupon reaching theOSD
disappearance time preset in the main menu.
PC
USB
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Edit
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
menu
Channel Edit
Auto Search
Exchange
press
/
to select Channel menu.
2. Press
then press to enter submenu.
/
to select the Channel Edit option, and
Search: Press / to select the Manual Search
option, and finally press / to start manual search.
menu
Upon finding a program, the search will automatically
stop, and the program will be stored onto the current
channel. You may stop the search by pressing OK or
MENU.
Channel Edit
Manual Search
Fine Tune
874.25MHz
20
Color System
Sound System
Skip
Auto
DK
ON
Fine Tuning: Press
option, and then press
/
to select the Fine Tune
to start UP or DOWN fine
/
tuning until obtaining a relatively good picture effect.
The fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a certain
program is not good enough. Normally, the optimal
picture effect can be obtained without fine tuning when
watching TV programs, and fine tuning is to meet the
need of adjusting a certain program.
Color system: Press
Systems option, and then press
color system.
/
to select the Color
to select correct
/
The TV is designed with three systems for your choice,
i.e. Auto, PAL , SECAM and NTSC. Generally, the
system is set as Auto and it is not necessary to make
an adjustment. The system is normally set as Auto
during auto search.
Sound system: The TV is designed with four systems
for your choice, i.e. DK, M, BG and I. Generally, it is not
necessary to adjust the system. The system is normally
set as DK during auto search.
Skip: When the skip is set ON, the channel will be
skipped when pressing P
selected by pressing 0-9 numerical keys.
or P
and only can be
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press to set Skip as Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
menu
1. Press MENU on the remote control to display main
menu, and then press to select Channel menu.
Channel Edit
Auto Search
Exchange
/
(Note: Only when Tuning Lock in the H. Lock menu is
Off can the Channel menu be selected.)
2.Press
then press /OK to enter submenu.
/
to select the Auto Search option, and
menu
Auto Search
3.Press
then press
stored, press
/
to select the Storage from option, and
to set the found from which to be
Storage from
Auto Search
/
/
to select the Auto Search option,
press /OK to enter the auto search menu, afterwards
press to select the Confirm option, and finally press
OK to confirm the starting of auto search.
menu
4. During auto search, the scale value on the progress
bar is continually increasing, indicating the auto search
is in progress. After finishing the auto search, the TV
will play the channel starting the auto search. To stop
the search in halfway, just press MENU/OK, and the
TV will play the first searched channel.
menu
Exchange
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
menu
press
/
to select Channel menu.
2. Press
press to enter its submenu.
/
to select the Exchange option, and then
3. Press
press
/
to select the To Channel option, and then
to set the found to be exchanged to.
/
4. After adjusting the current channel and the found to
be exchanged to, press to move the cursor to the
Exchange option, and then press to start exchange
/
/
and exchange the program on current channel to the
channel you set for exchange.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to select the desired program
Using Program number buttons
Directly enter the channel number with the numeric keypad on the remote control.
If to select channel numbers of double-digital or three-figure, press continuously the
numeric buttons in three second.
Using CH+/- buttons
Press CH+ to select a channel number in number increasing direction.
Press CH- to select a channel number in number decreasing direction.
How to select the desired sound
Press VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level
is displayed automatically on the TV screen.
Mute Setting
1. Press MUTE button on the remote control and a icon
will display on the screen. At this time, the sound of the
TV set is turned off.
2. If you want to recover the sound, press MUTE button
again or directly press VOL+ button.
Quick program view
1. Suppose that you previously watched a TV program on
Channel 8, but now you are watching a TV program on Channel
18 (as shown in the right figure).
2. If you want to return to Channel 8, just press “Q. VIEW
(Flashback)” once.
3. If you want to return to Channel 18 again, just press “Q. VIEW
(Flashback)” once again.
Note: This function is only available in TV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
This means the adjustment of specific contents in the picture, if already in normal
condition, it is not necessary to make any adjustment.
Due to different TV signal inputs, some items may need to be adjusted. The following
makes a description by only taking TV signal as an example.
How to select the picture mode
1. Press MENU to display main menu on the screen, and then press
Picture menu, afterwards press to enter the option to be adjusted.
2. Press to move the cursor to the option to be adjusted, and then press
select Standard/Bright/Soft/User/Eye Guard mode.
/
to select the
/
/
/
to
You can also press P.MODE on the remote control to select Standard/Bright/Soft/
User/Eye Guard mode.
Standard: The picture brightness and hue are moderate.
Bright: The picture is vivid, bright and dynamic.
Soft: The picture is soft and in light color.
User: The picture effect is set by yourself to your preference.
Eye Guard(The option does not exist when using a USB device.): In line with the
change of using environment, the TV set will adjust automatically the image display
mode to protect viewers' eyes from any negative impact.
How to customize your own picture status
1. Press MENU to display main menu on the screen, and
then press
menu
/
to select the Picture menu, afterwards
to enter the option to be adjusted.
press
2. Press
/
/
to move the cursor to the option to be
/
adjusted, and then press
effect.
to adjust it to your desired
Brightness: This will adjust the light output of the
complete picture, which will mainly affect the darker
areas of the picture.
menu
Contrast: This will adjust the intensity of bright parts in
the picture but keep the dark parts unchanged.
Sharpness: This will adjust the sharpness of fine details
in the picture.
Hue(select able in NTSC mode only): Allows you to
select the color mix (Tine) of the picture.
Chroma: This will adjust the saturation level of the colors
to suit your personal preference.
Picture Mode: Select the mode of picture(Standard/Bright/Soft/User/Eye Guard)
Palette: Press to select the Palette option, and then press to enter its
submenu, and finally press to select a toner pattern from six patterns (User,
/
/
Standard, 6500K, 7300K, 8500K and 9300K) to your color preference. Normally, the
Standard mode is selected.
If the User mode is selected, press
right figure), and then press to select a benchmark in the range of 2500K15000K
from warm color to cold color, afterwards press to adjust; if a different
/
to enter the palette menu, (as shown in the
/
/
benchmark is selected for adjustment, the original adjustment data will be
automatically cleared.
Reset: Return to factory default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to choose audio mode
1. Press MENU to display main menu on the screen, and then press
Audio menu, afterwards press
/
select User/Standard/Music/Theater mode.
/
to select the
/ to enter the option to be adjusted.
2. Press to move the cursor to the option to be adjusted, and then press
/
to
User: A spare setting that can be adjusted to personal tastes.
Standard: Normal sound with moderate bass and treble setting.
Music: Designed the sound to best suit music programs.
Theater: Enables extra bass and treble to enhance the movie experience.
You can also press S.MODE button on the remote control to select User, Standard,
Music and Theater mode.
How to customize your own audio status
menu
1. Press MENU to display main menu on the screen, and
then press
/
to select the Audio icon, afterwards
to enter the option to be adjusted.
to adjust.
SRS TS XT
press
2. Press
/
/
Volume
Press
Balance
/
to adjust the volume of a TV program.
This will adjust the output of the right and left speakers
to obtain the best stereo reproduction for your listening
position.
menu
Sound Mode
User
The intermediate value is 0. When indication value of
Balance increases toward 50, sound of the right and
left speakers becomes stronger and weaker, respectively.
When indication value of Balance decreases toward -50,
sound of the right and left speakers becomes weaker
and stronger.
Standard
Music
Theater
Sound Mode
This select the modes for sound reproduction dependent on the broadcast signals or
signals from external inputs received.
Select the mode of sound (User/Standard/Music/Theater).
If the User mode is selected, press to enter the sound mode menu,(as shown in
to select a benchmark in the range of 50-15K
to adjust, if a different benchmark is
the right figure), and then press
from bass to treble, afterwards press
/
/
selected for adjustment, the original adjustment data will be automatically cleared.
SRS TS XT
The surround sound feature expands the audio listening field wider and deeper to
create exceptional sound quality from the Tv’s speakers.
AVL (Automatic Volume Limit)
This will reduces the differences in volume level among broadcasters.
MAXXBass
To adjust the superbass. Press
Reset: Return to factory default settings.
/
to select superbass on or off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Current Time
The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV's clock is consistent with the
standard time of your time zone; if not, adjust the clock
as follows:
menu
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and then
press
/
to select the Time menu, afterwards press
/
to select the Current Time option.
2. Press to set hour and minute.
3. Press
/
to adjust the time.
4. After finishing time setting, press OK or MENU to
confirm.
Sleep Setting
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and then
press
/
/
to select the Time menu, afterwards press
to select the Sleep option.
2. Press
Pressing
/
to set your desired time.
allows you to select the time from the
menu
/
following options in turn: off, 5min, 10min, 15min, 30min,
45min, 60min, 90min, 120min, 180min and 240min.
Notes:
1. You may also setthe sleep function by operating the
Sleep key on the remote control unit.
2. If the Sleep function is set OFF, the function is not
available. If a time period is selected, the TV will
automatically enter standby mode upon reaching the
preset time, and will resume work when POWER is
pressed.
3. If the Sleep function has been set, press SLEEP
once, the remaining time to sleep will display on the
screen, if you press SLEEP once again before the
display disappears, the sleep time set last time will be
cleared and new time can be set.
4. During 1min before the TV enters sleep mode, there
will be count-down prompt such as Sleep 59s on the
screen until the TV is off. During the 60s, the user may
change the time or cancel the Sleep function by
operating the SLEEP key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of ON/OFF Time
This function allows the TV to automatically turn on or enter standby mode upon
reaching the preset time.
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and then
menu
press
press
/
to select the Time menu, afterwards
to select the On Time or Off Time option.
/
2. Press
press
/
to enter the setting screen, and then
to select ON or OFF, if you select ON, press
/
to set hour and minute. ON indicates the On/Off
Time function is enabled while OFF indicates the
function is disabled.
Note:
3. After finishing time setting, press OK or MENU to
confirm.
After setting the On/Off Time
function, if the TV is AC off or
forcible DC off, the function will
be automatically cleared.
Setting of On Channel
This function is used in combination with the On/Off Time function. When the TV turns
on upon reaching the On time, it automatically enters the preset channel.
menu
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and then
press
/
/
to select the Time menu, afterwards press
to select the On Channel option.
2. Press
/
to set the On Channel or OFF.
Setting of Remind Time and Remind Channel
The remind time and remind channel functions allow the TV to automatically enter the
preset channel at preset time. If the TV is AC off or forcible DC off, the preset time will
be cleared.
1. Press MENU on the remote control unit or MENU on the TV's front panel to display
the main menu, and then press
Time menu, afterwards press
Time option.
/
to select the
to select the Remind
menu
/
2. Press to enter the setting screen, and then
press to select ON or OFF, if you select ON, press
to set hour and minute, and then press to
adjust time.
/
/
/
3. After finishing time setting, press OK or MENU to
confirm.
4. Press
/
to select the Remind Channel option, and press
/
to set the found.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Menu Set
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and then
menu
Language
English
On
15s
press
/
to select the Function menu.
Blue Screen
Menu Timeout
AAA Picture Optimize
DSM
Demo Off
2.Press
then press
/
to select the option to be adjusted, and
to adjust it.
Eye Guard Mode
Tetris
/
Language: Two languages (i.e. Simplified Chinese and
English) are available for your choice.
Blue screen: Press
/
to set ON or OFF, if you select
ON, the TV screen will be blue if no signals are available.
Menu timeout: The option is for adjusting the menu
display time. Press
/
to set the desired time (5-15s).
AAA Picture Optimize:
1. Press MENU on the remote control unit to display the
menu
main menu, and then press
menu.
/
to select the Function
2. Press
3. Press to enter the submenu.
/
to select the AAA Picture Optimize option.
4. Press
then press
/
to select the option to be adjusted, and
to adjust it.
/
DSM: DSM is a picture effect demo function. The image
quality of pictures in the frame and on the right is
improved for DSM has made dynamic trace processing
on their hue and contrast. The picture out of the frame is
common without any processing.
Press
/
to set OFF,
,
.
Note: When the demo function is activated, once the user
changes channel, switches aspect ratio or signal source,
or searches for channels again, etc., this function will be
automatically disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
menu
Eye Guard Mode
Power On E.G. Mode Standard
Eye Guard Mode: In line with the change of using
environment, the TV set will adjust automatically the
image display mode to protect viewers' eyes from any
negative impact.
Change Ch. E.G.
Watching E.G.
Watching E.G. Delay
Off
Off
Off
1.Press to enter the sub-menu (see the picture on left)
/
2.Press
then press
to select the option to be adjusted, and
to set up.
/
Power On E.G. Mode Set the poweron time in the
Standard Mode/Eye Guard Mode/ Curtain Mode
according to the usage environment.
Change Ch. E.G. When you switch to another
channel, the image stays still to avoid any negative
impact to your eyes.
Watching E.G. When watching TV, you can adjust
the image display mode in line with the using
environment.
Watching E.G. Delay You can choose between
entering the Eye Guard Mode instantly or 3-5 seconds
later.
Tetris: After accessing the Function Menu, press to
enter (see the picture below).
NEXT BLOCK
KEY-PRESS INFO
LEFT: Left
RIGHT: Right
SCORE
00
DOWN: Down
BLOCK TRANSFORM: Ok
PAUSE: Up
GAME RESTART: Ok
GAME EXIT: Exit
LEVEL
0
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust Menu
The TV can be used as a display, and you may adjust relevant settings. The operating
method of various menus is the same as that described for TV signal. The following are
operating methods that different from that for TV signal.
When the TV is used as a display, you may set and
adjust its picture effect by the following steps.
menu
Press SOURCE to switch the signal input to PC mode.
1. Press MENU to display the screen main menu, and
OK
then press
the right figure.
/
to select the Adjust menu as shown in
OK
2. Press
3. Press
/
to select the option to be adjusted.
to adjust it.
/
Aspect Ratio
Press this key to select the screen display proportion.
Auto Adjust
This is used to reset the default setting parameters.
Clock
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Phase
This is used for adjusting the phase of pixel clock in PC
mode.
Adjust
Vertical and Horizontal position of picture can be
adjusted in this item.
Precautions:
1. When making H-Size, V-Size, H-Position or V-Position
adjustment, there sometimes may be abnormalities in
case of a large adjustment range, which is not a fault but
for the signal sync out of range, and the picture will
become normal by reverse adjustment.
2. In PC mode, there are only two aspect ratios (4:3, full
screen) available.
3. There will be a display proportion of "Dot By Dot" when
the singal is 1080P 50Hz in the source of YPbPr or HDMI.
This proportion is for Full-HD panel test in factory. Plseae
do not use this proportion, otherwise the display will be
distortionary.
(Only for L42M9/ L46M9/ L55M9/ LB42R3/ LB46R3/
LP55R3 )
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password to prompt the user to
enter a correct password by pressing corresponding numerical keys; if the password
is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter
a password again.
If there is no operation for a few seconds, the display will automatically disappear.
The Lock Set menu is as follows:
menu
To set new password
After entering the Lock Set menu, press
/
to select the Change Password option,
and then press to display the Change Password menu, afterwards enter a new 4-
/
digit password by pressing numerical keys and repeat entering this password once,
and finally select the option to be confirmed and press MENU to confirm, indicating the
successful change of password.
If the user does not want to change the password in halfway, he may press MENU to
exit from this menu.
Note: The initial password is 0000, and the password setting will not be changed after
executing the Unlock option.
Tuning Lock
Press
/
to select the Tuning Lock option, and then press
/
to set ON or OFF.
(If set ON, th Tuning Menu is not available in TV mode. To make any operation related
to the Tuning Menu, it is necessary to enter the Lock Set menu to set Tuning Lock OFF
or execute the Unlock option.)
Preset Source Setting
Preset Source may be set as Off, TV, AV1, AV2, S-Video, YPbPr/YCbCr, HDMI, PC
and USB. When the Preset Source is set as TV, after entering the Preset Channel
menu, press
/
to select the preset channel, and the channel will be forcibly
switched to the preset one upon turning the TV on; when the Preset Source is set as
other signal sources, the TV will be forcibly switched to the preset source upon turning
on. For example, when the Preset Source is set as YPbPr/YCbCr, the TV will be
switched to YPbPr/YCbCr upon turning on; when set as OFF, the preset function will
be closed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Channel Setting
Only when the Preset Source is set as TV can the Preset Channel option be available.
Press
/
to select preset channels from 0-254.
Source Lock
This function is used to prohibit watching a program from various external inputs, e.g.
AV, S-Video and PC, etc. Press
/
to select a certain option, and then press
to set an external input lock ON or OFF. If an external input lock is set ON, after
/
entering this mode, the screen will display blue background with muting and a prompt
Source Lock; during Source Lock prompt, Source Lock will remain if there is no other
display on the screen. To watch a program from a locked external input, just enter
Source Lock submenu to set corresponding status as OFF or execute the Unlock
option in the Lock Set menu.
Child Lock Setting
Press
/
to select the Child Lock option, and then press
/
to set ON or OFF. If
set ON, this control key will not respond, and the screen will display Child Lock when
the key is pressed; if no other operation is made, the display will automatically
disappear later. To resume Child Lock function, just enter the Lock Set menu to set
Child Lock OFF or execute the Unlock option.
Max Volume Setting
Press
/
to select the Max Volume option, and then press
/
to freely adjust the
max volume within the range of 0~100. After finishing the setting, the max volume in
the Volume menu will not exceed the preset max volume; for example, if the preset
max volume is 30, the volume in the Volume menu can not be increased any longer
upon reaching 30; if the preset max volume is less than the value in the Volume menu,
the latter will decrease along with the decrease of preset max volume.
Power on Volume Setting
/
Press
to select the Power on Volume option, and then press
/
to freely
adjust the volume within the range of 0~100. After setting a certain value (except OFF),
the TV plays a program with the preset volume upon turning on, when set as OFF,
upon turning on, the TV plays a program with the volume before turning off last time.
Unlock Setting
Press
/
to select the Unlock option, and then press to clear all the lock settings,
namely set all the lock setting options as OFF; the Preset Channel is set as OFF and
max volume returns to 100 (except password).
Download from Www.Somanuals.com. All Manuals Search And Download.
Streaming Media Playing System
Note: The diagrams in the following section are schematic and only for your
reference. Please see the actual product if necessary.
Installation of Streaming Media System
1. Supported file formats:
1) Picture: *. jpg, *. bmp, *. png files;
2) Music: *. Mp3 files;
3) Movie:
MPEG4: *. avi files in accordance with Div×4. ×/5.x Protocol;
MPEG2: some *. mpeg files;
MPEG1: *. dat and some *. mpeg files;
4) Text: *. Txt.
Note: Due to the particularity of file coding, some files may be unable to be
read.
2. Supported equipment:
Support the equipment that supports Mass Storage Protocol and whose file
system is FAT/FAT16/FAT32, such as some USB disks, mobile hard disks,
card readers, MP3 players and digital cameras. If USB equipment could not
be identified due to unsupported file system, please format the equipment to
the above-mentioned file system;
3. The external card reader supports most of the digital cards in the current
market; the types of digital cards that can be read are relevant to the
performance of selected card reader; you may attach standard mobile hard
disks (working voltage 5.0V, working current not higher than 500mA); during
media playing, do not pull out storage media, otherwise it may cause
system halt, damage the files in storage media or damage USB equipment;
sometimes, the TV may halt due to overhigh information error rate, in which
case you should restart the system; there are a lot of nonstandard USB
mobile equipment in the market, they may not be identified when connected
to the streaming media playing system; the above phenomena may also
occur on computers and are not the TV's fault.
4. To achieve smooth playing, ensure the following:
1) The file code rate should be lower than 300KB/S;
2) Due to the limitation of USB signal transmission distance, it is
recommended not to use USB patch cord, in case of using the cord, make
sure that its length is not over 1m;
3) Use high-speed USB equipment in conformity with USB2.0 Interface
Standard; if USB equipment in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
5. Although many movie files are with such postfixes as avi and mpeg,
actually there are several formats in the files; however, the TV can only play
some files in avi and mpeg formats. Some files with the postfix “dat” are not
movie files, but data files commonly used in computers, and they can not be
played as movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Streaming Media Playing System
Installation of Streaming Media System
Notes:
1. Time of insertion: insert a card into corresponding interface 2s
after starting the streaming media. Do not start the streaming
media system with a card;
2. After inserting a card, the screen displays the inserted partition's
letter in USB interface mode, indicating the card has been
identified, at which time you can play or make other operations;
3. There are many types of digital cards in the market. It is
recommended to use quality products from qualified manufacturers.
In case of reading difficulty or restricted reading speed, please
change to another card.
Data Protection of USB Digital Card
1. Do not remove or touch the rear part of digital card when it is
working, otherwise it may cause data loss or damage to the card.
2. Please insert the digital card in a correct way each time you use
streaming media.
3. Haier shall not be held liable for any data loss or quality
problems of digital cards.
Warning:
After the use of a digital card or USB disk, please
place it in a safe place to avoid any danger resulting
from being swallowed by a child.
Download from Www.Somanuals.com. All Manuals Search And Download.
Streaming Media Playing System
Start/Exit Streaming Media Playing System
1. Press USB on the remote control unit to select the
streaming media function.
2. Insert USB equipment into corresponding USB
interface 2s after starting the system.
Text
3. After entering the system menu, press
remote control unit to select the required USB
/
on the
Music
equipment, and then press
unit to select the required file.
4. Press OK to enter the selected file.
/
on the remote control
Picture
Movie
Settings
5. To exit the streaming media playing system and
watch a TV program, you must return to the streaming
media main menu at first (to protect equipment), and
then press SOURCE to select TV or directly press USB
to return to the TV mode.
Notes:
1. While playing non-picture or non-movie files, press MENU or SOURCE, the TV
screen will be black and display corresponding menu; moreover, in USB mode, only
when playing a movie can such shortcuts as Picture Mode, etc. work, and only MUTE
can work in other menus. After entering the Picture option, pictures without
thumbnails will not be accompanied with a small-window thumbnail, and pictures in
both bmp and png formats do not have thumbnails. In addition, it's best not to operate
menus in the progress of opening pictures to avoid system chaos.
2. If a USB and a digital card are inserted at the same time and each has a partition
letter, the USB will be defaulted as Disk C whichever is inserted first.
3. While playing a USB or digital card, press SOURCE, the screen picture will return
to USB main interface, and only at this time can you switch corresponding signal
sources by pressing SOURCE again.
4. While playing a file in txt format, press MENU, the screen will directly return to txt
main menu.
Operating Method of Streaming Media Menu
1. Press
option.
2. Press OK to confirm your selection.
/
to scroll through main menu or submenu and select your desired
3. Press REV/FWD to achieve the FF (fast forward) and FB (fast back) of the movie
or music being played.
4. Press PLAY/PAUSE to pause playing, and press it again or press OK to continue
playing.
5. Press ZOOM to magnify pictures; in zoom mode, press
the picture.
/
and
/
to move
6. Press D.CALL to display or exit the screen display information while playing.
7. Press BACK to stop playing, or return to the previous menu, and press BACK
repeatedly to return to the main menu.
8.After the on-screen display disappers, press ZOOM to magnify the image; then
to move the image under the magnified mode.
press
/
/
/
Download from Www.Somanuals.com. All Manuals Search And Download.
Streaming Media Playing System
Playing a Picture
1. After entering USB main interface, press
select a harddisk partition, and then press
the Picture option.
/
to
to select
/
Text
Music
2. Press OK to confirm the selection and enter the
picture playing interface.
Picture
Movie
3. Press
/
to change page, and press
/
to select
Settings
the picture you want to play, and then press OK to enter
the playing display interface.
Press ZOOM to magnify the picture, and then press
/
/
/
to move the picture.
Press
Press
/
to select the last or next picture.
to rotate the picture.
/
4. To exit playing, just press BACK repeatedly.
Move
Play
Return
Option
Playing a Movie
1. After entering USBmain interface, press
select a harddisk partition, and then press
select the “Movie” option.
/
to
to
PVR
/
Music
Picture
2. Press OK to confirm the selection and enter the
movie playing interface.
Movie
Settings
3. Press
/
to change page, and press
/
to
select the movie you want to play, and then press
OK to enter the playing display interface.
Press
/
to select the last or next movie.
Press D.CALL to display relevant information while
playing.
4. To exit playing, just press BACK repeatedly.
Return
Move
Play
Option
Note:
The menu display varies with the number and names
of files in your equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Streaming Media Playing System
Playing Music
Text
1. After entering USB main interface, press
select a harddisk partition, and then press
select the Music option.
/
to
to
Music
/
Picture
Movie
2. Press OK to confirm the selection and enter the
music playing interface.
3. Press
/
to change page, and press
/
to
select the music you want to play, and then press OK
to play the music.
4. To exit music playing, just press BACK repeatedly.
Text
1. After entering USB main interface, press
to select a harddisk partition, and then press
to select the Text option.
/
/
2. Press OK to confirm the selection and enter the
text playing interface.
3. Press
read, and then press OK to play the text reading
interface. Press to change page, and press
/
/
/
to select the text you want to
Return
Move
Play
Option
/
BACK to exit the reading interface.
4. To exit the Text mode, just press BACK repeatedly.
Settings
1. After entering USB main interface, press
select the Settings option.
/
to
Set up
2. Press OK to confirm the selection and enter the
settings selection interface, and then press
select the required options.
Photo Slide Time
Movie SubTitle
<
<
Middle
enable
>
>
/
to
Photo Slide Time
Set the scan speed of pictures to be scanned in slide
form.
There are three options (Slow/Middle/Fast). Press
to select the desired option.
/
Movie SubTitle
Set movie subtitle enable or disable.
Press
/
to select the desired option.
Download from Www.Somanuals.com. All Manuals Search And Download.
Early malfunctions can be prevented. Careful and regular cleaning can extend the
amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you
begin any cleaning.
Cleaning the Screen
1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth
in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it`s
almost dry, and then use it to
wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you
turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be
sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it`s a
good idea to unplug the power
cord to protect against possible damage from lightning or power surges.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PAL, NTSC, SECAM
DK, BG, I, M
USB,
662x200x500mm
796x230x590mm
1020x290x724mm
1122x330x789mm
1328.6x365x895mm
26”
32”
42”
46”
55”
90W
8.7Kg
130W
200W
250W
300W
11.8Kg
27.5Kg
29.0Kg
39.0Kg
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090509260A
Download from Www.Somanuals.com. All Manuals Search And Download.
|