DIGITAL LED LCD TELEVISION
INSTRUCTION MANUAL
Model: LET32T1000HF
LET42T1000HF
LET39Z18HF
LET46Z18HF
Please read this manual carefully before operating the unit, and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warnings
Safety Warnings
Welcome
Thanks for buying this 32"/39"/42"/46" Full HD Digital LED LCD TV. This guide will help you to set up and begin using
your TV.
En
Firstly, check the contents of your box with the parts checklist below:
tꢀ32"/39"/42"/46" Full HD Digital LED LCD TV
tꢀRemote control
tꢀAAA battery ×2
tꢀInstruction Manual
tꢀWarranty
tꢀTV Stand
tꢀScrews for TV stand
tꢀComponent audio adapter
tꢀCover bottom
Now you can get started!
Important Information
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical
must be followed if it is to be replaced.
WARNING:
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
CAUTION: ƷThe main plug is used as disconnect device which shall remain readily operable.
ƷPlease read this manual carefully before using your television and keep this manual in a
good place for future reference.
Ʒ To achieve the best performance of your television, read this User‘s Manual carefully and
properly store it for future reference.
Ʒ Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
Ʒ Unauthorized disassembly of this product is prohibited.
TruSurround XT, SRS and the
symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only two
speakers.
times.
Digital LED LCD Television Instruction Manual EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warningss
Do not locate the product close to water or
oil(ie, cooking oil or lubricating oil), which may
cause fire hazards.
EN-3 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warnings
En
Digital LED LCD Television Instruction Manual EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
About Your LED LCD TV
Installing the Stand
Only 32"42" LED LCD Model
(Put your TV on the table with its rear cabinet facing upwards.)
1. Put the stand on the TV set
2. Screw the stand in the positions with the screws supplied (4 x B4 x 16).
Screws:4xB4X16
EN-5 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Installing the Stand
Only 39"46" LED LCD Model
(Put your TV on the table with its rear cabinet facing upwards.)
En
1. Put the rear board on the stand neck, and fix the rear board with the
screws supplied (4 x B4 x 12F).
Front
Back
Screws: 2xB4X12F
Screws: 2xB4X12F
2. Put the rear board on the rear cabinet of TV, and fix the rear board with the
screws supplied (4 x M4 x 14).
Screws:
4xM4X14
Digital LED LCD Television Instruction Manual EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Front Control Panel
32" 42"
39" 46"
1
2
3
4
5
6
7
Toggles between all the available input
4
5
6
7
CH-
VOL+
VOL-
TV channel down.
Press to increase the volume.
Press to decrease the volume.
INPUT
1
sources.
MENU
CH+
Press to select the main menu.
TV channel up.
2
3
POWER
EN-7 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Rear Terminals Control
En
13
12
11
10
9
8
7
HDMI1 IN HDMI2 IN HDMI3 IN
PC
AUDIO
SCART
1
3
6
4
5
2
HDMI1 IN
HDMI2 IN
HDMI3 IN
input
input
input
7
YPbPr
AV
ANTENNA
COAXIAL
USB
input
input
input
1
2
3
4
5
6
8
9
10
11
12
13
PC
PC
AUDIO
SCART
input
input
input
Common Interface
Earphone
output
Digital LED LCD Television Instruction Manual EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Get to Know Your Remote Control
When using the remote control, aim it towards the remote sensor on the TV.
POWER
No Function
1
2
No Function
3
Picture Mode
4
Sound Mode
5
Display Information
Sleep Button
DTV Audio/NICAM
Screen Button
6
7
8
9
abc
jkl
def
ghi
mno
Channel List
pqrs
tuv
wxyz
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Display or Close Subtitle
Numerical Keys
Source
Q.View
Volume Selection
Channel Selection
Mute
Menu
Electronic Programme Guide
Favourite
OK Button
Cursor Mover Button
STAR T RECORD
Exit
RECORD
USB REPEAT
Teletext Index / USB Zoom
USB PLAY/PAUSE
USB STOP
Teletext Red Button / USB Fast Rewind
Teletext Green Button / USB Fast Forward
Teletext Yellow Button / USB Previous File
Teletext Blue Button / USB Next File
Teletext Text
Teletext Mix
Teletext Subcode
Teletext Hold
Teletext Reveal
Teletext Size
No Function
ANGLE/REC.LIST
Note
RED button, GREEN button, BLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)
40 REC.LIST
EN-9 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Refer to the DVD player user guide for operating
instructions.
Connecting Your TV
Antenna Connection
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
En
DVD
Improve Your Signal
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
Connect a DVD Player or VCR to Your
TV
Connect Your PC to the TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV and
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
them.
Read your computer user guide and check it has a
VGA connector.
SCART Input
Connect the scart lead from the external device
(DVD player, Set-top box or games console) to the
TV scart socket.
Connect a D type 15-pin VGA interface cable to the
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
HDMI Input
Turn on the power of the TV firstly and then the PC.
Connect the cable from the HDMI device to the TV
HDMI socket.
Press the button on the TV or TV remote control to
set the video input mode to PC.
Press the SOURCE button to select HDMI mode.
Once the image shows, if there is noise present,
change the PC mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
Refer to the HDMI device user guide for how to
operate.
Mount Your TV onto the Wall
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
Connect a DVD Player to Your TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr) IN socket on your TV.
Turn on the DVD player and insert a DVD.
Press the SOURCE button to select COMPONENT
mode.
Digital LED LCD Television Instruction Manual EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Do not throw away the battery with common domestic
Preparation of Your
Remote Control
according to local regulation.
Getting Started
Battery Installation
Setting up
Place the remote control face down, then open the
cover of the battery compartment.
Location
You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.
Connection
Install two AAA batteries. (The + and - symbol of the
battery must match with the marks on the remote).
Insert your TV aerial lead into the Antenna input at
the side of the TV.
Insert the batteries into the remote control. Make
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
Close the cover of the battery compartment.
Switching Your TV On
Press the POWER button on the right of the TV
once. A indicator light will appear in the right of
the screen.
Press POWER on the remote control. The TV will turn
on. This may take a few moments, and this display will
appear on the screen when the TV is turned on for the
first time.
Battery Caution
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control.Avoid using nearby
Do not put the remote control in direct heat or in a damp
place as you may damage the remote.
Press OK button on the remote control to enter the
Backlight Mode menu.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
EN-11 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
HOME MODE
Auto Search (Antenna or Cable)
Press ꢀꢁ button to select HOME MODE and press
OK button to enter the Language menu.
Press MENU button.
Press ꢀꢁ button to select language and press
OK button to enter the Country menu.
Press ꢀꢁ button to select Tuning , press ꢃ button
to enter.
Press ꢀꢁ button to select Country and press
OK button to enter the Tuner mode menu.
Press ꢀꢁ button to select Tuner MODE and press
OK button to enter the Channel Scan menu.
En
Press ꢀꢁ button to select Tuner Mode
and Country .
(Antenna or Cable)
Press ꢂꢃ button to select you needed.
Press ꢀꢁ button to select SCAN and press OK button
to start auto scan, it may take a few minutes to complete.
Press ꢀꢁ button to select Channels , press OK
button to enter.
SHOP MODE
Press ꢀꢁ button to select SHOP MODE
OK button to enter the Shop mode menu.and press
Press ꢀꢁ button to select the Channel scan, and
press OK button to start searching.
The shop mode will display on the screen, and you could
not do any operation except pressing EXIT button to exit.
Tuning Your TV
Switching to an External Source
Other Than TV
If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the screen,
use the ꢀ and ꢁ button to highlight the required
source and press OK select.
For details of how to plug in other equipment see
Connecting your TV on page 10.
Digital LED LCD Television Instruction Manual EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
lect
Enter
Select
Exit
Getting Started
Once a channel is located, you can press OK button
to save it.
Press EXIT button to stop auto search during
searching.
Press EXIT button to exit.
Note
It may take a few moment to complete the Auto
Search.
Analog Manual Search
Press Menu button to exit DTV search ,ATV search
will go on.
Follow the below steps when you need a manual search.
Press MENU button , Press ꢀꢁ button to select
Tuning , press ꢃ button to enter.
Digital Manual Search(Cable)
Press ꢀꢁ button to set Antenna (Antenna or Cable)
and Country .
Press MENU button.
Press ꢀꢁ button to select Tuning , press ꢃ button
to enter.
Press ꢂꢃ button to select you needed.
Press ꢀꢁ button to select Channels , press OK
button to enter.
Press ꢀꢁ button to set Antenna ( Cable ) and
Country .
Press ꢀꢁ button to select Analog
Press ꢂꢃ button to select you needed.
Manual Scan, press OK button to enter.
Press ꢀꢁ button to select Channels , press OK
button to enter.
Press the number button on the remote control to
set Frequency(MHz).
Press the number button on the remote control to
set Frequency(KHz).
Pressꢂꢃ button to set Modulation you want.
Press the number button on the remote control to
set Symbol Rate(Ksym/s).
Press ꢀꢁ button to select Search Up and press OK
button to search the higher frequency channel.
Select Search Down and press OK button to search
the lower frequency channel.
Once a channel is located, you can press OK button
to save it.
Press OK button to start searching,
Press EXIT button to exit.
EN-13 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Press ꢀꢁ button to select the number position you
want to remove to, press OK button to con rm.
Skip
You can press the EXIT button to cancel the changes
Press MENU button.
at anytime.
Press ꢀꢁ button to select Tuning , press OK button
to enter.
Edit
En
Press ꢀꢁ button to select Channels . Press OK
button to enter the sub-menu.
Press ꢀꢁ button to select Edit . Press OK button to
enter the sub-menu.
Press ꢀꢁ button to select Skip . Press ꢃ button to
enter the sub-menu.
Press Ok button to enter the menu you want and
change the option you want.
Press ꢀꢁ button to select the channel and press
OK button to select the channel to skip.
Common Interface
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
Sort
Press ꢀꢁ button to select Sort. Press OK button to
enter the sub-menu.
Press ꢀꢁ button to select the channel you want
and press OK button to select the channel.
Warning
t
the Common Interface slot.
Digital LED LCD Television Instruction Manual EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Insert the CAM correctly, then Smart Card to the CI
slot that is located at the side of the TV.
Using Your TV
CI Slot
CAM
How to Select the TV Program
Smart Card
Using Program number button Enter the channel
number with the number keypad on the remote
control.
Using P+/P- button.
Press the P+/P- button to select a channel number.
Turn on the TV and it will display the below message
if the CA module is detected. Wait for few moments
until the card is activated.
How to Adjust Volume
Press V+/V- button on the remote control or the bottom
of the TV to adjust the volume level.
Adjusting Picture
Settings
Press the OK button to enter and use the ꢀand ꢁ
button to select the option you need and press the
“OK”button.
Changing the Picture Setting
Press MENU button.then pressꢀꢁ button to select
Picture , press OK button to enter..
Detailed information on the CI card used is
displayed.
Press OK button to access the card menu. Refer to
the module instruction manual for setting details.
Press ꢀꢁ button to select the item requires
adjusting.
Pressꢂꢃ button to adjust the selection item.
When you are satis ed with your choice, press the
EXIT button to return to normal viewing or press
EN-15 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
ij
MPEG NR
MENU button to return to the previous menu.
To adjust the level of MPEG NR.Press ꢂꢃ button to
Mode
Medium or strong.
This will select the picture mode. Select Standard/
/User/Vivid/Eco/Cinema/sport
program.
Active Contrast
To adjust the level of luminance of the picture.
according to the
You can quickly select the desired mode by P.MODE
Press ꢂꢃ button to set Active Contrast as On / Off.
button on the remote control.
En
Adjusting Sound
Setting
Changing the Sound Setting
Brightness
This will adjust the light output of the complete
picture.
Contrast
Press MENU button.
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Pressꢀꢁ button to select Sound , press OK button
to enter.
Colour
This will adjust the saturation level of the colours to
suit your personal preference.
Sharpness
This will adjust the sharpness of ne details in the
picture.
Tint
Allows you to select the colour mix (Tint) of the
picture.
Press ꢀꢁ button to select the item requires
adjusting.
Press ꢂꢃ button to adjust the selection item.
Note
When you are satis ed with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
The Tint function is only available in NTSC mode.
Sound mode
This sound setting can be adjusted to suit your
personal preference.
Colour temperature
Balance
Pressꢂꢃ button to set Colour temperature as User,
Cool, Standard, Warm.
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
This will increase or decrease Warm (red) standard and
Cool
(blue) colours to suit personal preferences.
Bass
Select Cool to give the white colour a blue tint,
Standard to give the white colour a neutral tint, Warm
to give the white colour a red tint.
To adjust the lower-pitched sounds.
Treble
To adjust the higher-pitched sounds
Advanced Video
Sourround
ij
DNR
This will control the Woofer output.
Press ꢀꢁ button to select Surround.
Press ꢂꢃ button to set Surround as OFF, ON.
To adjust the level of reducing the digital noise.
Pressꢂꢃ
Medium strong
Auto
Equalizer
This sound setting can be adjusted to suit your
personal preference.
Digital LED LCD Television Instruction Manual EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
SPDIF Type
Language
This will control the SPDIF Type.
Press button to select SPDIF Type.
Press button to set SPDIF Type. As OFF,
Auto,PCM.
To select the menu language.
Screen Mode
To set the picture proportion, pressꢂꢃ button to
select Auto/16:9/4:3/Zoom1/Zoom2 . You can
quickly select the desired mode by SCREEN button on
the remote control.
SPDIF Delay
To adjust the sound to make the video and audio
playing at the same time. This function actives
when Digital Audio Output is PCM.
t
16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to ll the entire
screen.
AVL (Automatic volume control)
To adjust the volume of each channel automatically
to a normal level to ensure the volume is the same.
Press ꢂꢃ
t
4:3 mode
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
Sound Type
Set the sound output type
Type
t
t
Zoom1
Press ꢂꢃ button to set the type as
Normal or Visually Impaired.
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Visually Impaired
This function actives When Type is Visually
Impaired.
Zoom2
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
Speaker
ij
ij
Press ꢂꢃ
Speaker
alteration and screen coverage.
Volume
Blue Screen
This will select the character background colour.
To adjust the volume of Visually Impaired audio.
Function Settings
Press MENU button.
Note
The Blue Screen function is only available for
ATV mode.
Pressꢀꢁ button to select Function , press OK
button to enter.
Time
t
Time Zone
Press ꢂꢃbutton to select the appropriate time
zone
Press ꢀꢁ button to select the item requires adjusting.
Pressꢂꢃ button to adjust the selection item.
When you are satis ed with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
EN-17 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
t
Time
ij Subtitle Type
Press OK button to enter the submenu.
Pressꢂꢃ button to set Subtitle Type as Normal and
Hearing Impaired.
Teletext
To set the mode of Teletext.
ij
Digital Teletext Language
To adjust the default digital Teletext language.
En
ij
Decoding Page Language
To adjust the decoding page language.
Auto Synchronization: Pressꢂꢃbutton to
Audio Language
to set the time manually.
Date: Pressꢂꢃbutton to select the position and
digits button to set the date.
Time:Pressꢂꢃbutton to select the position and
digits button to set the time.
Audio Language 1st
Press ꢂꢃ button to set Audio Language.
To select the default audio language for a digital
channel. This function actives when in digital channel.
Audio Language 2nd
:Pressꢂꢃbutton to select once,
To select the second default audio language for a
digital channel. This function actives when in digital
channel.
adjusted.
Timer: Press digits button to switch on AM and
PM.
Frist Time Installation
t
Sleep Timer
Pressꢂꢃbutton to select the number of minutes: To
,40Minutes
,50Minutes,60Minutes,90Minutes or 120Minutes.
Shop Mode
Press ꢂꢃ
1
2
Reset default
Auto Sleep
t
To recover to the default value.
According to the latest ERP regulation,
this unit will switch off itself automatically
if no change in status within the last 4
hours of operation.
Lock Menu Setting
Using this function can control the tuner, program,
source volume and so on. Pressing MENU on the remote
OSD Timer
control, press ꢀꢁ button to select Lock menu, press ꢃ
button to enter, and you will be required to enter the
password. The initial password of the television is 0000. If
you forget your password, you can always input 9443 to
regain control.
To set how long you want the menus to appear
on-screen. Each press of ꢂꢃ button repeatedly to
select the number of preset seconds, the Time will be
5sec
Subtitle
multimedia.
ij Subtitle
Press ꢂꢃ
ij Digital Subtitle Language 1.
To adjust the default digital subtitle language.
ij Digital Subtitle Language 2.
To adjust the second default digital subtitle
language.
Digital LED LCD Television Instruction Manual EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
HOTEL SETTING
Press MENU button and press1,0,0,1,0,8 button to enter
the menu:
System Lock
Press ꢀꢁ button to select System Lock.
Press ꢂꢃ button to set On or
Channel BLock
Pressꢀꢁbutton to select the channel you want to
lock.
Parental Guidance
Press ꢀꢁ button to select parental lock. Press ꢂꢃ
button to select OFF or 4-18 to limit the age of
children who will watch TV.
Hotel Mode Operation:
Turn on/off the Hotel Mode.
Max Volume:
Clear ALL
Press ꢀꢁ button to select Clear Lock mode.
Pressꢂꢃbutton to unlock all set modes, setting all lock
Set the max volume for the TV.
Default Volume:
Set the default volume for the TV when
it turns on.
Change Password
Press ꢀꢁ button to select Change Password
item. Press ꢃbutton to enter the submenu.
OSD Menu Display
Press
button to set this function as off or on.
ꢂꢃ
Keypad Lock :
Prohibite the input source for the TV.
Remote Controller Lock:
Clear all the locks above.
Remote Controller Lock
you can change the password .
Source Lock
Default Source
Default Program
TV Back up to USB
USB Restore to TV
EN-19 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Shortcut Menu
Display
Subtitle Function
Press SUBTITLE button on the remote control will set
En
INFO
Note
Press INFO button on the remote control, will display
the current channel information.
You can press the EXIT button to cancel the changes
at anytime.
Press SUBTITLE button on the remote, it will
display subtitle languages menu only in the DTV
mode.
CH.List Function
Press CH.List button on the remote control, will
display Channel List menu.
Press yellow button to select Digital,Radio or
Analog ,press ꢂꢃ button to select Air ,Cable or
Satellite.
AUDIO/I/II
Press AUDIO button on the remote control, will
display Audio Languages menu.
Press ꢀꢁ button to select the channel and press
OK button to enter. You can press the EXIT button
to cancel the changes at anytime.
Note
Press AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.
GUIDE Function
Press GUIDE button on the remote control, will
display Program Guide menu, press ꢀꢁꢂꢃbutton
to select the program.
You can press the EXIT button to cancel the changes
at anytime.
Eliminate Sound
When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.
Press the MUTE button on the remote control and
“Mute”type face will display on the lower part of
the screen. At this Time, the sound of the TV set is
If you want to recover the sound, press the MUTE
button again or directly press V+ button.
Quick program view
Note
This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the last watched program.
Available only in the DTV mode.
FAV Function
Press FAV button on the remote control, will display
Favourite List menu.
Press OK button to set the current channel into the
favourite list.and press OK button again , you can
delete the current channel from the favourite list.
Suppose the channel number you used just now
is 8 and the channel number you are using is 18
(as shown in the gure).
Digital LED LCD Television Instruction Manual EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
page.
Page number entering
To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text
buttons.
If you want to return to the last watched program
channel 8, you can simply press the Q.View button.
If you want to return to channel 18, press the
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Time.
Mix mode
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
Teletext Functions
Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also
provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).
INDEX
Press the INDEX button to go to the index page of
teletext.
Note
The teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.
Hold
Teletext
Pressing the button will stop the teletext page
automatically updating. This feature is very useful
where there are several teletext pages or data on the
same page number.
Teletext functions
To select “teletext” press the
button on the
“Note all menu functions are not available in teletext
mode”. Only a few direct button control functions are
available in teletext mode, they are:
t Volume adjustment
Size
Pressing the button changes between full screen
t Mute function
Page up/down
Use the P+/P- buttons to browse next or previous
EN-21 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
top half bottom half full screen. This feature is
very useful as it magnifies the image making the
characters easier to read.
To Use the USB Device
Supported file formats:
tꢀ Photo: *. jpg;
tꢀ Music: *. mp3 files;
tꢀ Movie: *. avi files;
tꢀ TEXT: *. txt
Reveal
Pressing the
En
button will reveal hidden text. This
feature is used to reveal information such as answers
to Teletext on-line interactive puzzles.
Note
Due to the particularity of file cording, some files
may be unable to read.
Supported equipment:
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT32, such
as some USB disks, mobile harddisks, and MP3
player. If USB equipment could not be identified
due to unsupported file system, please format the
equipment to the above-mentioned file system.
Fast text coloured buttons
Fast text automatically displays the four most
commonly used pages that the broadcaster thinks
that you may want to choose next. Press the same
coloured button on the remote control as the
coloured link at the bottom of the teletext page to go
directly to that page.
To achieve smooth playing, ensure the following:
tꢀ The file code rate should be lower than 300KB/S;
tꢀ Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
tꢀ Use high-speed USB equipment in conformity
with USB2.0 full speed Interface Standard; If USB
equipment does not comply with USB full speed
Interface Standard, the playing may be unsmooth.
Subcode
Pressing the button by entering its 4-digit number
to enter a secondary page.
Connecting a USB Device
Turn the TV on.
USB Mode
Connect a USB device containing photo, music and/
Note
When the USB is connected to the TV, then you can
select the Media Play.
The diagrams in the following section are
schematic and only for your reference. Please see
the actual product if necessary.
The OSD of the USB function may be somewhat
example to help the instruction.
USB Media Menu operation
Plug-in an external storage device into USB port.
Press SOURCE button on the remote and press
/
button to select USB.
ꢁ
ꢀ
Press OK button on the remote to display the sub
page.
Digital LED LCD Television Instruction Manual EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
1. Play or pause
Stop
3. Play previous picture
4. Play next picture
1
3
2
4
2
Press EXIT button to return to the previous menu.
Note
You may play the pictures among selected.
To play pictures
To play music
Press
/
button to select Picture, then press OK
ꢂꢃ
Preess
/
button to select Music, then press
ꢂꢃ
button on the remote.
ENTER button in the Media Play menu.
Press
/
ꢁ
/ /
ꢂꢃ
button to select the desired
, then press OK button to play
ꢀ
pictures
.
Press
/
/
/
ꢂꢃ
button to select the desired
then press OK button to play
ꢁ
ꢀ
music
.
Press MENU button to display the option list.
Press MENU button to display the option list.
Press the button on the remote control to select the
adjusted item, press ENTER button to con rm.
Press the button on the remote control to select the
adjusted item.
EN-23 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
Press the button on the remote control to select the
adjusted item.
1. Play or pause
Stop
3. Fast reverse
4. Fast forward
5. Play previous music
6. Play next music
1
5
2
6
2
1. Play or pause
1
2
2
Stop
3. Fast reverse
4. Fast forward
3
4
5. Play previous video
6. Play next video
En
3
6
4
5
Press EXIT button to return to the previous menu.
Press EXIT button to return to the previous menu.
Note
You can press any button except POWER
button to exit Audio Only function.
Note
Do not remove USB device from the TV until
you have exited the USB mode otherwise you
may damage the USB device.
You may play the music among selected.
To play movie
To play text
Preess
/
button to select Movie, then press
ꢂꢃ
Preess
/
button tobutton to select Text, then
ENTER button in the Media Play menu
ꢂꢃ
press ENTER button in the Media Play menu
Press
/
ꢁ
/
/
ꢂꢃ
button to select the desired
, then press OK button to play
ꢀ
Press
/
ꢁ
/
/
ꢂꢃ
button to select the disired text
ꢀ
movie
.
Press MENU button to display the option list.
Press MENU button to display the option list.
Digital LED LCD Television Instruction Manual EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the features
Press the button on the remote control to select the
adjusted item.
Insert the USB device with FAT32 format into the
USB connector.
Press PLAY/PAUSE button to start timeshifting .
1. Play or pause
1
2
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
2
Stop
3. Play previous text
4. Play next text
3
4
You can stop the time shift program being played by
pressing the STOP button.
Press EXIT button to return to the previous menu.
Recording
Using External USB
Disk For Recording
Note
Press RECORD button to record the program being
played, and press EXIT button to make the recording
interface minimum.
RECORD
The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
If you select all the size format for time shift, you
can not do any recording.
14:52:52
[00:00:00/01:30]
5 five The streets of SAN Francisco (384MB)
Only have to format when you use the device for
record for the first time.
Press STOP button to stop the program recording
being played.
Suggest the minimum device size for record is 1GB.
Bit rate:
For Playback the recorded program. Enter USB to
t
Device bit-rate>5MB/s REC is safe .
Select the content you recorded.
The system can not work normally if the USB
device have the listing problem below:
Press OK button to play the program recorded and
press STOP button to stop it.
t
t
The device has bug.
The device has error block.
-00:00:08
14:30
15:00
/X
t
The device reports the unfaithful size.
IMPORTANT
t
USB device should be format as FAT32 format by
your PC before insert to the USB connector.
Time Shift
EN-25 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Section
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
Reference Sections
Television out
of control
Troubleshooting
En
To assist in location of possible faults use the
help guide below:
Note
If the fault can not be repaired using the above
guide consult with your local authorized service
centre.
Verify if the television is
properly plugged in.
No picture, no
Verify if the television has a
sound
The TV set must only be repaired by a qualified
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages
proper supplied power source.
Verify if electricity is available.
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Blank screen
Restart the television if power
supply is interrupted.
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
No sound
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
Poor sound
Verify if correct channel is
selected.
Adjust the antenna.
No picture in
some channel
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
No color for
some channel
program
(black and
white)
Refer to relative instructions
in the Manual for color
adjustment.
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
Spots with
some or all
pictures
Digital LED LCD Television Instruction Manual EN-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Sections
innovations.
42"
46"
32"
39"
Model
LET42T1000HF LET46Z18HF
LET32T1000HF
LET39Z18HF
Picture,Sound
system
PAL/SECAM-B/G,I,D/K.L
120W
150W
Power
75W
100W
Audio Output
8W+8W
100 channels for ATV, 1400 channels for DTV
Channels
External input port
Component Input , PC Input , PC Audio input , SCART , Antenna input
Video Input , R/L Audio Input , HDMI Input , USB
O
O
Temperature
Humidity
Working:5 C~35 C
O
O
Storage:-15 C~45 C
Working:20%~80%
Storage:5%~90%
Accessories
Remote control , AAA battery ×2, Instruction Manual, Warranty TV Stand
4XScrews for TV stand
Component audiro, adapte
Cover bottom
983X250X654
1057X255X673
Dimensions with
stand
(WXDXH)
751X200X515
888X277X608
14.1
12.5
16.5
13
Weight
8.6
7.3
13
withstand(Kg)
Weight without
stand and base(Kg)
10.0
200X200
400X400
Wall Mounting
200X100
200X200
EN-27 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Appendix
Appendix1
VGA Timing table
Item 61.08H.
Freq.(Khz)
Mode
Resolution
V.Freq.
(Khz)
26~32"
39~46"
En
1
31.469
31.469
31.469
35
IBMVGA
IBMVGA
IBMVGA
MACINTOSH
VESA
640X350
720X400
640X480
640X480
640X480
640X480
800X600
800X600
800X600
800X600
832X624
1024X768
1024X768
1024X768
1024X768
1280X720
1280X768
1280X768
1280X800
1360X768
70.086
70.087
59.94
67
2
3
v
v
4
5
37.861
37.5
72.089
75
v
v
v
v
v
v
v
v
v
v
v
v
6
VESA
7
35.156
37.879
48.077
46.875
49.7
VESA
56.25
60.317
72.188
75
8
VESA
9
VESA
10
11
12
13
14
15
16
17
18
VESA
MACINTOSH
VESA
75
48.363
56.476
60.023
61.08
60.004
70.069
75.029
75.781
59.855
59.87
75
v
v
v
v
v
v
VESA
VESA
IBM XGA-2
VESA CVT
VESA
44.772
47.776
60.289
49.702
47.72
v
v
v
v
v
v
VESA
VESA
59.81
59.799
19
20
21
VESA CVT
VESA
63.981
79.976
55.935
70.635
65.29
1280X1024 60.02
1280X1024 75.025
v
v
v
v
v
v
v
v
VESA
VESA
1440X900
1440X900
59.887
74.984
VESA
22
23
24
CVT1.76MW
1680X1050 59.954
64.674
66.587
CVT1.76MW-R 1680X1050 59.883
CVT2.3MA-R 1920X1080 60
Digital LED LCD Television Instruction Manual EN-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Appendix 2
1 support 480i/480p,576i/576p,720p,1080i ,1080p,42“ only format with HDCP.
2.Digital interface with 4 channels TMDS signal.
Scart input/output description
TV Source
Screen Display
Source
Scart out
ATV
ATV
ATV
DTV
DTV
DTV
EN-29 Digital LED LCD Television Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|