ꢀ
ꢁ
All other company, product and service names mentioned herein are trademarks,
registered trademarks or service marks of their respective owners.
Please Read Before Proceeding
THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
HTC shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from furnishing this material.
The information is provided “as is”without warranty of any kind and is subject to
change without notice. HTC also reserves the right to revise the content of this
document at any time without prior notice.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S
OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations, and
stipulate that you must inform the person with whom you are speaking that the
conversation is being recorded. Always obey the relevant laws and regulations of your
country when using the recording feature of your device.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording or storing in a
retrieval system, or translated into any language in any form without prior written
permission of HTC.
INTELLECTUAL PROPERTY RIGHT INFORMATION
Copyright © ꢀ007 High Tech Computer Corp. All Rights Reserved.
Disclaimers
THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED
“AS IS”AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND
FROM HTC. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HTC AND ITS AFFILIATES expressly disclaim any and all representations
and warranties, express or implied, arising by law or otherwise, regarding
the Weather Information, Data, Documentation, or any other Products
and services, including without limitation any express or implied warranty
of merchantability, express or implied warranty of fitness for a particular
purpose, non-infringement, quality, accuracy, completeness, effectiveness,
reliability, usefulness, that the Weather Information, Data and/or
Documentation will be error-free, or implied warranties arising from course
of dealing or course of performance.
,
,
, ExtUSB, HTC Touch, HTC Care, Touch Dual, and TouchFLO are
trademarks and/or service marks of High Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile,
Windows XP, Windows Vista, ActiveSync, Windows Mobile Device Center, Internet
Explorer, Windows Live, MSN, Hotmail, Outlook, Excel, PowerPoint, Word, and Windows
Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
microSD is a trademark of SD Card Association.
Java, JꢀME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.
Copyright © ꢀ007, Adobe Systems Incorporated.
Copyright © ꢀ007, Macromedia Netherlands, B.V.
Without limiting the foregoing, it is further understood that HTC and
its Providers are not responsible for Your use or misuse of the Weather
Information, Data and/or Documentation or the results from such use.
HTC and its Providers make no express or implied warranties, guarantees
or affirmations that weather information will occur or has occurred as
the reports, forecasts, data, or information state, represent or depict and
it shall have no responsibility or liability whatsoever to any person or
entity, parties and non-parties alike, for any inconsistency, inaccuracy, or
omission for weather or events predicted or depicted, reported, occurring
or occurred. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING,
YOU ACKNOWLEDGE THAT THE WEATHER INFORMATION, DATA AND/OR
DOCUMENTATION MAY INCLUDE INACCURACIES AND YOU WILL USE
Macromedia, Flash, Macromedia Flash, Macromedia Flash Lite and Reader are
trademarks and/or registered trademarks of Macromedia Netherlands, B.V. or Adobe
Systems Incorporated.
Copyright © ꢀ007, JATAAYU SOFTWARE (P) LTD. All Rights Reserved.
Copyright © ꢀ007, Dilithium Networks, Inc. All Rights Reserved.
Copyright © ꢀ007, Esmertec AG. All Rights Reserved.
ArcSoft MMS Composer™ Copyright © ꢀ00ꢁ-ꢀ007, ArcSoft, Inc. and its licensors. All
Rights Reserved. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc.
in the United States and/or other countries.
Sprite Backup is a trademark or service mark of Sprite Software.
The device is under RIM Keyboard technology.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
ꢃ
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
COMMON SENSE AND FOLLOW STANDARD SAFETY PRECAUTIONS IN
CONNECTION WITH THE USE OF THE WEATHER INFORMATION, DATA OR
DOCUMENTATION.
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company. For a
product that operates from battery power or other sources, refer to the operating
instructions that are included with the product.
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY
FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT
LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS
ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY,
PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR USE OF
THE WEATHER INFORMATION, DATA OR DOCUMENTATION HEREUNDER
REGARDLESS OF THE FORESEEABILITY THEREOF.
• Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack.
Do not disassemble, crush, puncture, short external contacts or circuits, dispose of
in fire or water, or expose a battery pack to temperatures higher than 60˚C (1ꢂ0˚F).
WARNING: Danger of explosion if battery is incorrectly replaced. To
reduce risk of fire or burns, do not disassemble, crush, puncture, short
external contacts, expose to temperature above 60°C (1ꢂ0°F), or dispose
of in fire or water. Replace only with specified batteries. Recycle or
dispose of used batteries according to the local regulations or reference
guide supplied with your product.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to avoid possible
legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all warnings in
the operating instructions on the product.
• Take extra precautions
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment,
observe the following precautions.
• Keep the battery or device dry and away from water or any liquid as it may
cause a short circuit.
ELECTRICAL SAFETY
• Keep metal objects away so they don’t come in contact with the battery or
This product is intended for use when supplied with power from the designated
battery or power supply unit. Other usage may be dangerous and will invalidate any
approval given to this product.
its connectors as it may lead to short circuit during operation.
• Do not use a battery that appears damaged, deformed, or discolored, or the
one that has any rust on its casing, overheats, or emits a foul odor.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in an electric
shock to your device.
• Always keep the battery out of the reach of babies and small children, to
avoid swallowing of the battery. Consult the doctor immediately if the
battery is swallowed.
• If the battery leaks:
This product is equipped with a USB cable for connecting the product to a desktop
or notebook computer. Be sure your computer is properly grounded (earthed) before
connecting the product to the computer. The power supply cord of a desktop or
notebook computer has an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
•
Do not allow the leaking fluid to come in contact with skin or clothing. If
already in contact, flush the affected area immediately with clean water
and seek medical advice.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
EXPLOSIVE ATMOSPHERES
•
•
Do not allow the leaking fluid to come in contact with eyes. If already
in contact, DO NOT rub; rinse with clean water immediately and seek
medical advice.
When in any area with a potentially explosive atmosphere or where flammable
materials exist, the product should be turned off and the user should obey all signs
and instructions. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death. Users are advised not to use the equipment at refueling
points such as service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical plants, or where
blasting operations are in progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. These include fueling areas, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
Take extra precautions to keep a leaking battery away from fire as there
is a danger of ignition or explosion.
• Communicate the appropriate steps immediately in case a hazard occurs.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures. Do not
leave the product or its battery inside a vehicle or in places where the temperature
may exceed 60°C (1ꢂ0°F), such as on a car dashboard, window sill, or behind a glass
that is exposed to direct sunlight or strong ultraviolet light for extended periods of
time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with handheld
devices, except in the case of emergency. In some countries, using hands-free devices
as an alternative is allowed.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of time.
SAFETY PRECAUTIONS FOR RF EXPOSURE
• Avoid using your device near metal structures (for example, the steel frame of a
building).
NOTE: For France, mobile headphones or earphones (listed below) for this device have
been tested to comply with the Sound Pressure Level requirement laid down in the
applicable NF EN ꢃ0ꢁꢁꢀ-1:ꢀ000 and/or NF EN ꢃ0ꢁꢁꢀ-ꢀ:ꢀ00ꢁ standards as required by
French Article L. ꢃꢀꢁꢀ-1
• Avoid using your device near strong electromagnetic sources, such as microwave
ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
•
Earphone, manufactured by HTC, Model HS Sꢀ00
• Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s navigation
system and its communications network, using this device’s phone function on board
an airplane is against the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off the phone by switching to Airplane Mode.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your device
to determine if it is adequately shielded from external RF energy. Your physician may
be able to assist you in obtaining this information.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where blasting
operations are in progress, or in potentially explosive atmospheres such as fuelling
areas, fuel storehouses, below deck on boats, fuel or chemical transfer or storage
facilities, and areas where the air contains chemicals or particles, such as grain, dust, or
metal powders. Please be aware that sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death.
Turn the phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your service provider, or call the customer
service line to discuss alternatives.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄ
ꢅ
NONIONIZING RADIATION
General Precautions
Your device has an internal antenna. This product should be operated in its normal-use
position to ensure the radiative performance and safety of the interference. As with
other mobile radio transmitting equipment, users are advised that for satisfactory
operation of the equipment and for the safety of personnel, it is recommended that no
part of the human body be allowed to come too close to the antenna during operation
of the equipment.
• Heed service markings
Except as explained elsewhere in the Operating or Service documentation, do not
service any product yourself. Service needed on components inside the device
should be done by an authorized service technician or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized
service technician or provider under the following conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
Use only the supplied integral antenna. Use of unauthorized or modified antennas may
impair call quality and damage the phone, causing loss of performance and SAR levels
exceeding the recommended limits as well as result in non-compliance with local
regulatory requirements in your country.
To assure optimal phone performance and
ensure human exposure to RF energy is
within the guidelines set forth in the relevant
standards, always use your device only in its
normal-use position. Do not touch or hold
the antenna area unnecessarily when placing
or receiving a phone call. Contact with the
antenna area may impair call quality and cause
your device to operate at a higher power
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the operating
instructions.
• Avoid hot areas
The product should be placed away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your phone after a dramatic change in temperature
When you move your device between environments with very different temperature
and/or humidity ranges, condensation may form on or within the device. To avoid
damaging the device, allow sufficient time for the moisture to evaporate before
using the device.
level than needed. Avoiding contact with
Internal
the antenna area when the phone is IN USE
antenna
optimizes the antenna performance and the
location
battery life.
NOTICE: When taking the device from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler environment, allow
the device to acclimate to room temperature before turning on power.
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the product.
Slots and openings are provided for ventilation. These openings must not be blocked
or covered.
• Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any
mounting of the product should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
• Use product with approved equipment
This product should be used only with personal computers and options identified as
suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the
LCD screen.
Contents
1.3 Starting Up...........................................................................................23
1.4 The Today Screen.................................................................................26
1.5 The Start Menu ....................................................................................27
1.6 Quick Menu..........................................................................................28
1.7 QuickTasks ...........................................................................................28
1.8 HTC Home™..........................................................................................29
1.9 TouchFLO™...........................................................................................34
1.10 Status Icons ........................................................................................41
1.11 Programs ............................................................................................43
2.1 Entering Information...........................................................................52
2.5 Using Touch Keypad.............................................................................57
2.6 Using Symbol Pad ................................................................................58
2.7 Using Letter Recognizer ......................................................................59
2.8 Using Block Recognizer .......................................................................60
2.9 Using Transcriber .................................................................................60
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀ
1ꢁ
3.1 Using the Phone...................................................................................64
3.2 Making a Call........................................................................................66
3.3 Receiving a Call ....................................................................................69
3.4 Making a Video Call .............................................................................72
3.5 Receiving a Video Call..........................................................................76
3.6 Smart Dial.............................................................................................76
7.2 Text Messages....................................................................................115
7.5 E-mail Setup Wizard ..........................................................................122
7.6 Using E-mail.......................................................................................125
4.1 Basic Settings .......................................................................................82
4.3 Protecting Your Device ........................................................................87
9.2 Adobe® Reader® LE ............................................................................143
9.4 ZIP .......................................................................................................145
9.5 Backing Up Data.................................................................................146
10.1 Comm Manager................................................................................150
10.2 Connection Setup ............................................................................151
10.5 Dial-up ..............................................................................................154
10.8 Windows Live™.................................................................................157
10.10 Bluetooth .......................................................................................163
6.1 Contacts................................................................................................98
6.2 SIM Manager ......................................................................................102
6.5 Notes...................................................................................................109
6.6 Voice Recorder....................................................................................111
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Getting Started
Getting Started 17
Front panel
1.1 Getting to Know Your Device and Accessories
Notification LEDs
* See description below.
Top panel
Second Camera
POWER
Use this camera for video call
conversations or to take a
self-portrait.
Press to turn off the display temporarily. To turn off the power, press and hold for
about ꢃ seconds. For more information, see “Starting Up”in this chapter.
Earpiece
Listen to a phone
call from here.
NAVIGATION CONTROL/
ENTER
Touch Screen
Press this multi-directional
control up, down, left, or
right to move through menus
and program instructions;
carry out the selection by
pressing the center button.
TALK
Lanyard/Strap holder
Press to answer an
incoming call or dial a
number.
Left panel
Right panel
Volume Buttons
• Press the top or bottom
to adjust the speaker
volume.
• During a call, press the top
or bottom to adjust the
earpiece volume.
Stylus
END
Press to end a call or to
return to the Today screen.
Press and hold to open the
Quick List where you can
choose an action to do.
20-key QWERTY
keyboard
RESET
Slide up the front
panel of the device to
reveal the keyboard.
Use to dial phone
numbers and enter
information.
Remove the back cover to
see the Reset button. With
the stylus, press the RESET
button to soft-reset your
device.
In the Quick List, touch
Settings (or tap Start >
Settings > System tab >
Long Press End Key) to set
the behavior when pressing
and holding the END key.
CAMERA
Press to launch the
Camera. See Chapter
11 for details.
Sync Connector/Earphone
Jack/AC adapter connector
Connect the supplied
* Right LED: Shows Green and Amber lights for HSDPA/UMTS/GSM/GPRS/EDGE
standby, message, and network status as well as for notification and
battery charging status. Shows a flashing red light when the battery level
reaches ꢃ% or lower.
USB cable to synchronize
information or plug in the
AC adapter to recharge
the battery. You can also
connect the supplied USB
stereo headset for hands-free
conversation or for listening
to audio media.
microSD Slot
See "Installing a
Storage Card" for
details.
Left LED: Shows a flashing Blue light when the Bluetooth system is powered up and
ready to transmit/receive Bluetooth radio signals.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄ Getting Started
Getting Started 1ꢅ
Back panel
Accessories
1
4
7
2 Megapixel
Camera
See Chapter 11
for details.
Speaker
Read Me First
2
Screen
Protector
8
9
5
Self-portrait Mirror
Use it when taking self-
portrait shots.
3
6
Back Cover
Remove to install
the SIM card and
battery.
No. Accessory
Function
1
2
3
Battery
Insert into the device before turning it on.
Screen protector
Stereo headset
Stick on the touch screen to prevent scratches.
Provides a volume control slider and a Send/End button.
Press the Send/End button to pick up a call or put a call
on hold; press and hold the button to end the call.
Bottom panel
4
5
6
7
AC adapter
Recharges the battery.
USB sync cable
Extra stylus
Connects your device to a PC and synchronizes data.
Use to tap items onscreen.
User manual and References for using your device.
ReadMeFirst
Microphone
8
9
Pouch
Acts as a protective carrying case for your device.
Source for additional tools and programs.
Getting Started
and Applications
discs
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0 Getting Started
Getting Started ꢀ1
To remove the back cover
Before installing the USIM/SIM card or battery, you have to remove the back
cover.
1.2 Installing the USIM/SIM Card, Battery, and
Storage Card
1. Make sure your device is turned off.
Always turn off your device before installing or removing the USIM/SIM card
or battery.
2. Hold the device securely with the front facing down.
3. With your thumb or finger, lift up the bottom of the back cover.
The USIM/SIM card contains your phone number, service details, and
phonebook/message memory. Your device supports both 1.ꢄV and ꢁV SIM
cards. Some legacy SIM cards will not function with your device. You should
consult with your service provider for a replacement SIM card. There may be
fees for this service.
Your device contains a rechargeable Li-ion battery. It is designed to use
only manufacturer-specified original batteries and accessories. Battery
performance depends on many factors, including network configuration,
signal strength, the temperature of the environment in which you operate
your device, the features and/or settings you select and use, items attached
to connecting ports, and your voice, data, and other program usage
patterns.
Lift from here
To install the USIM/SIM card
1. Pull back the red rubber door near the SIM card slot to allow you to
insert the USIM/SIM card.
Battery life estimates (approximations):
•
•
•
Standby time: Up to 180 hours for GSM
Up to 250 hours for UMTS
2. Insert the USIM/SIM card with the gold contacts facing down and the
cut corner on the outside.
Note You can check the SIM card drawing on the SIM card slot to see how to
(Subject to network and phone usage)
Talk time: Up to 5 hours for GSM.
Up to 3 hours for UMTS.
insert the USIM/SIM card.
3. Secure the USIM/SIM card in place by closing the red rubber door.
(Subject to network and phone usage)
Media playback time: Up to 4.95 hours for WMV;
Up to 6 hours for WMA.
Cut corner of SIM card
Warning!
To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire
or water.
• Do not expose to temperatures above 60oC (1ꢂ0oF).
Red rubber door
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulations.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ Getting Started
To install the battery
Getting Started ꢀꢁ
1.3 Starting Up
Install the battery by inserting
it with its exposed copper part
aligned with the protruding copper
conductor on the lower-right side
of the battery compartment.
Copper conductor
After inserting your USIM/SIM card and battery, you can now power on and
start using your device.
Turn your device on and off
To turn on the power
Press and hold the POWER button for a few seconds.
Insert the bottom side of the
battery first, then gently push the
battery into place.
When you turn on your device for the first time, a Quick Start Wizard
will guide you through the calibration process and the setup of regional
settings, date and time, and password. For more information about touch
screen calibration, see “Calibrate the device”.
To replace the back cover
1. Secure the top part of the back
cover by ‘locking’it into the ꢁ
openings on the device.
To turn off the power
Press and hold the POWER button for a few seconds.
A message will then be displayed, prompting you whether or not to turn off
the device completely.
2. Press the middle portion of the
2
3
back cover.
3. Press the bottom part of the
back cover to lock it into place.
You should hear a click.
Auto configure the data connection settings
The first time you power on your device, you will see a notification message
from the Connection Setup on the Today screen.
To install the microSD™ card
1. Pry open the rubber cover at the
bottom-left side of the device.
2. Insert the microSD card with the
gold contacts facing up.
3. Close the rubber cover.
Tip Press the microSD card to pop it
out of the slot.
The Connection Setup can automatically configure your device’s data
connections, such as GPRS, WAP, and MMS, for you so that you do not need
to enter the settings manually onto your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢂ Getting Started
To automatically configure data connection settings
Getting Started ꢀꢃ
Calibrate the device
1. When you see the notification message from the Connection Setup,
tap Yes.
Calibrating the touch screen involves tapping the center of a cross with the
stylus as the cross moves around the screen. This process ensures that when
you tap the screen with your stylus, the tapped item is activated.
Notes
•
If you do not see the notification message, tap
display the message.
on the title bar to
If your device does not accurately respond to screen taps, follow these steps
to re-calibrate it:
•
If your USIM/SIM card supports multiple network operator profiles, a
message will appear with network profile choices. Select the profile
you want to use and tap OK.
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the onscreen
2. Connection Setup then starts to configure your device’s data
instructions to complete the calibration.
connection settings.
3. After the Connection Setup completes the configuration, tap Restart.
Manage screen settings
The device’s display has the following orientation modes: Portrait and
Landscape. To change the orientation, tap Start > Settings > System tab >
Screen, and select the orientation you want.
For more information about the Connection Setup, see Chapter 10.
Charge the battery
Tip
To quickly change the screen orientation, you can also tap the Rotate Screen
icon in HTC Home’s Launcher. See “HTC Home”later in this chapter for details.
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you charge the battery. Some batteries
perform best after several full charge/discharge cycles. You can charge the
battery in two ways:
To smooth the edges of screen fonts for many programs, on the ClearType
tab, select the Enable ClearType check box.
•
•
Charging the device’s battery by connecting the power adapter.
Connecting your device to a PC via the provided USB Sync cable.
To increase the readability or to see more content on the screen, on the
Text Size tab, adjust the text size by moving the slider.
Note
Only the AC adapter and USB cable provided with your device should be
used to charge the device.
Switch your device to Sleep mode
Quickly pressing the POWER button turns off the display temporarily and
switches your device to Sleep mode. Sleep mode suspends your device to a
low power state while the display is off in order to save battery power.
Charging is indicated by a solid amber light on the right LED indicator.
As the battery is being charged while the device’s power is on, a charging
icon (
) will be shown on the title bar of the Today screen. After the
battery has been fully charged, the right LED becomes green and a full
Your device also automatically goes into Sleep mode when you leave the
device idle after a certain amount of time.
battery icon (
) appears on the Today screen’s title bar.
Warning!
• Do not remove the battery from the device while you are charging it
using the AC or car adapter.
To specify the timeout period before your device goes into Sleep mode
1. Tap Start > Settings > System tab > Power > Advanced tab.
• As a safety precaution, the battery stops charging when it overheats.
2. Under On battery power, make sure the Turn off device if not used
for check box is selected.
3. Select the battery timeout period, then tap OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ6 Getting Started
You will still be able to receive messages and calls while your device is in
Getting Started ꢀ7
1.5 The Start Menu
Sleep mode. Pressing the POWER button again or new incoming calls/
messages will wake up your device.
The Start menu, located at the top left corner of the Today screen, displays a
list of programs. You can start a program by scrolling through the programs
list and then pressing ENTER, or by tapping a program with the stylus.
1.4 The Today Screen
Open a recently-used program.
The Today screen displays important information, such as upcoming
appointments and status indicators. You can touch or tap a section on the
screen to open the associated program.
Switch to the Today screen.
Signal strength
Adjust volume
Open a program.
Connection status
Notification
(The items displayed in the
Start menu can be customized
by tapping Start > Settings >
Personal tab > Menus).
Battery status
Open Quick Menu
(See “Quick Menu”in this chapter for details)
Open Start Menu
Access more programs.
View and change settings.
HTC Home
Enlarged Title Bar
View Help information for the
current screen.
(See “HTC Home”
in this chapter
for details)
See third
bulleted item
below
Tip By default, the Start menu is displayed
in a large size to make it easier for you to
select menu items by simply touching
them with your finger. To display the
Start menu in its normal size, tap Start >
Settings > Personal tab > Large Start
Menu then clear the Enable large Start
menu check box.”
Your upcoming
appointments
•
•
To access the Today screen, tap Start > Today.
To customize the Today screen display, including the background
image, tap Start > Settings > Personal tab > Today.
•
Touch the area in the Title bar where the icons are to show the
enlarged title bar. In the enlarged Title bar, touch the item to activate
it. The enlarged Title bar is available in all screens.
For more information about customizing the Today screen, see Chapter ꢂ.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢄ Getting Started
Getting Started ꢀꢅ
1.6 Quick Menu
1.8 HTC Home™
The Quick Menu, located at the top right corner of the Today screen, shows
HTC Home™ is a Today screen plug-in that gives you up-to-date local
information at a glance, such as time, day and weather information, and
shows new messages and missed calls. It also has a customizable launcher
where you can add your favorite applications for one-touch access and a
Profile selector where you can quickly change the profile or ring tone of
your device.
the currently running programs. You can quickly switch between running
programs, stop programs, and see how much program memory is being
used.
Customize how programs
are closed. (See “Using Task
Manager”in Chapter 1ꢀ.)
Tap this button to open
the Quick Menu.
HTC Home has four components: Home, Weather, Launcher and Sounds.
At the bottom of HTC Home, there is a toolbar that allows you to switch
between these components.
Shows the total program
memory usage (in
percentage). Tap to open
Memory settings.
Stop all
currently
running
programs.
• To switch to a running
program, tap the
program name.
• To stop running a
program, tap
.
HTC Home
Toolbar
1.7 QuickTasks
QuickTasks lets you quickly
Sounds
Home Weather Launcher
access frequently-used tasks
by simply opening the front
panel of the device.
To switch between the different components of HTC Home
Do any of the following:
The QuickTasks screenn only
opens when you open the
keyboard while on the Today
screen.
•
•
•
Touch the tabs in the toolbar using your finger.
Tap the tabs in the toolbar using the stylus.
Use the NAVIGATION CONTROL. If the toolbar is not selected, press
NAVIGATION up/down first to select the toolbar. Press NAVIGATION
left/right to select a tab and then press ENTER.
You can disable the Quick
Tasks by tapping Start >
Settings > System tab
> Keypad QuickTasks
and clearing the Enable
QuickTasks when keypad is
opened check box.
Touch to activate the item
Note
QuickTasks will not open when the screen orientation is in Landscape mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ0 Getting Started
Getting Started ꢁ1
Tip
You can also browse through the list of cities to choose your city.
Home
Home displays the current day, date and local time. When you have new
4. Select the city on the list and tap Select.
incoming messages and calls, it shows you the number of new e-mails,
SMS/MMS messages, and missed calls. If you have set up the alarm, it also
shows the Alarm icon.
To view weather information
After selecting your city, your device automatically connects to the Internet
via GPRS/ꢁG and downloads weather information of the current day and
the next four days of the week. The current temperature, the highest and
lowest temperatures, and a visual indicator of the climate (showing if it’s a
cloudy or rainy day, etc.) will be displayed in the Weather tab.
Time display.
Date
Touch this display area
when you want to
Alarm icon
change the date or time,
or to enable the alarm.
Number of missed calls.
Touch this icon to view
the Call History.
Shows the time or days that have
passed since the last download
Tap this area
of weather information. Tap this
if you want to
Number of new e-mails.
Touch this icon to view
your e-mails.
item to download the latest
select another
Number of new SMS/MMS messages.
Touch this icon to view your SMS and MMS messages.
weather data.
city.
Tap this area to view
weather information of the
next four days of the week.
Weather
Current day’s weather
Weather shows you the current weather as well as weather information of
the next four days of the week. The first time you use this feature, you need
to select your city first to get the weather information of your city.
Tap this area
to return to
the current
To select your city
day’s weather.
3
Weather for the next ꢂ days
2
Note
If you have not connected to the Internet and downloaded weather
information for five days, the following error message will be displayed:
"Unable to retrieve data for selected city. Select here to retry." Use GPRS/ꢁG
to connect your device to the Internet, then tap the area that shows the error
message to download weather data.
To customize weather settings
1. Tap the area that shows the city name.
1
1. Select the Weather tab (
4
).
2. On the Select City screen, select Menu > Weather Options.
2. Tap the area that shows Select your city here.
3. On the Select City screen, type in the city name whose weather
information you want to track, then tap
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢀ Getting Started
3. You can enable or disable the following options:
Getting Started ꢁꢁ
Touch a shortcut to remove it.
• Download weather data automatically. When this check box is
selected, weather information will automatically be downloaded from the
AccuWeather Web site whenever you select the Weather tab, if the data
has not been updated within the last three hours. Weather data will also be
downloaded every time an ActiveSync connection occurs (through over-
the-air or USB connection).
Return
Clear this check box if you prefer
to manually download weather
information.
Note
To replace a shortcut, you need to delete it first and then add a shortcut to
your favorite program or setting.
• Download when roaming. Select
this check box only if you want to
allow automatic download of weather
data when roaming. This may incur
additional costs.
Sound
Sound provides a selection of profiles, each preconfigured with a different
volume setting. It also lets you quickly change the ring tone of your device.
• Temperature Scale. Choose
whether to display temperature in
Celsius or Fahrenheit.
Tap a button to select a
profile (from left to right):
Normal, Silent, Vibrate,
Automatic
Tap to open the
phone sound
settings where
you can select
the ring tone.
Tip
To check for more detailed weather information on the AccuWeather Web
site, select Menu > About Weather on the Select City screen and then tap
the link that shows AccuWeather.com. Internet Explorer Mobile then opens
and brings you to the AccuWeather Web site.
Tap
to set the device volume to Automatic profile. If Automatic is
Launcher
selected, the device will vibrate during a scheduled event in your calendar;
when there is no scheduled event in your calendar, the device will use the
Normal mode settings.
Launcher allows you to add quick shortcuts to your favorite programs and
settings for one-touch access. Quick settings such as Adjust Backlight,
Rotate Screen and Lock Device, and a few program shortcuts are added by
default. They can be replaced with your preferred settings and programs.
Note
For information about manually adjusting the device volume, see Chapter ꢁ.
Touch an empty slot to add
a shortcut to a setting or
your favorite program.
Touch a quick
shortcut to open
the associated
program or apply
the associated
setting.
Remove shortcuts
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢂ Getting Started
Getting Started ꢁꢃ
To navigate the Touch Cube
1.9 TouchFLO™
The Touch Cube is a three-dimensional, cubic user interface. To flip the
interface from one side to another, slide your finger left or right on the
touch screen.
TouchFLO™ is a special feature that gives you a better touch panel
experience on your device. With TouchFLO, you can simply use your finger
to scroll and pan the screen.
TouchFLO also features the Touch Cube where you can launch messaging
programs, Internet Explorer® Mobile, and more. You can also add your
favorite contacts, play music, and access your pictures and videos.
Note
Touch Cube is displayed in portrait view only. To be able to open Touch Cube,
make sure your display is set to portrait mode.
Touch Cube
To open the Touch Cube
Slide your finger upward, starting from the
bottom of the touch screen where it shows a
logo image.
Touch Cube screens
There are three sides to the Touch Cube interface:
•
On the first side of the interface, you can add up to nine favorite
contacts. If you make calls to certain people frequently, you can add
them as favorite contacts for quicker access.
Note You should already have contacts with phone numbers stored on your
device or USIM/SIM card before you can add them as favorite contacts.
For more information about creating contacts, see Chapter 6.
For more information about synchronizing contacts and other
information between your device and PC, see Chapter ꢃ. For information
about synchronizing your device with the Exchange Server, see
Chapter ꢄ.
To close the Touch Cube
To close the Touch Cube and return to the
screen prior to opening the Touch Cube, slide
your finger downward on the touch screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ6 Getting Started
Getting Started ꢁ7
When you have different
When you add a favorite
phone numbers assigned
to the same contact, an
icon appears on the top
left corner of the contact
square to tell you which
number is assigned to the
particular square.
contact and there is no photo
associated to that contact, the
contact’s first name (or last
name) will be displayed.
•
The second side of the interface
provides quick shortcuts to your
e-mail messages, text and MMS
messages, the Internet, and
other applications.
Select an empty slot
to add a favorite
contact. If the
contact has more
than one contact
number, select
the number to call
when you touch the
contact.
Simply touch the icons
on the screen to open the
corresponding program.
Tap to call the
number associated
with the contact. Tap
and hold to open the
contact card.
•
On the third side of the interface, you can play back music and access
the images and video files on your device.
Open the Phone
program.
(See Chapter ꢁ for
details.)
Touch this icon to open Audio Manager and
play back music files (For more information
about using Audio Manager, see Chapter 11.)
Delete favorite
contacts.
Open Call History.
(See Chapter ꢁ for details.)
Open Contacts.
(See Chapter 6 for details)
While playback is in
progress in Audio
Manager, return to this
screen. You will then
see playback controls
Select a favorite
contact to remove it.
Touch these buttons
and the music title,
to control music
artist, and remaining
playback time of the
current music.
playback.
From left to right:
Backward, Play/
Pause, Forward
Open Camera Album for
still images.
Return to your
list of favorite
contacts.
(See Chapter 11 for
details.)
Open Camera Album for
videos.
(See Chapter 11 for details.)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢄ Getting Started
Getting Started ꢁꢅ
To use finger panning
Finger scrolling and finger panning
•
•
•
•
To pan downward, touch and hold on the touch screen then drag
your finger upward.
With TouchFLO, you can use finger scrolling and finger panning when
viewing content that cannot be fit entirely on the screen, such as Web
pages, documents, and messages. Finger scrolling can also be used to scroll
up and down lists such as the contacts list, file list, message list, calendar
appointments list, and more.
To pan upward, touch and hold on the touch screen then drag your
finger downward.
To pan towards the right, touch and hold on the touch screen then
drag your finger to the left.
Note
Finger scrolling and panning works in both portrait and landscape modes.
To pan towards the left, touch and hold on the touch screen then
drag your finger to the right.
To use finger scrolling
•
Slide your finger downward to scroll up the screen.
•
You can also pan diagonally.
•
Slide your finger upward to scroll down the screen.
Note
Scrollbars on the screen indicate that there is content that cannot fit on the
screen. You can use finger panning only when there are scrollbars on the
screen.
When finger
scrolling up
and down, slide
anywhere within
this area.
To continuously pan
1. Drag your finger towards the boundary and hold. The Web page,
document, or message that you are viewing then continuously pans.
Left and right boundaries
•
•
•
To scroll towards the left, slide your finger to the right.
To scroll towards the right, slide your finger to the left.
Top and
bottom
boundaries
While the screen is scrolling, you can stop the scrolling by pressing
your finger on the touch screen.
Note
Scrollbars on the screen indicate that there is more content that cannot fit
on the screen. You can finger-scroll up and down only when there's a vertical
scrollbar shown on the screen. Likewise, you can finger-scroll left and right
only when there's a horizontal scrollbar.
2. Release your finger to stop panning.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ0 Getting Started
To go to the next or previous message
Getting Started ꢂ1
1.10 Status Icons
While reading a message, slide your
finger across the screen to go to the
next or previous message.
The following are some of the status icons that you may see on the device.
To go to the next message, slide your
finger from right to left on the screen;
To go to the previous message, slide
your finger from left to right on the
screen.
Icons that appear in this area
Icons that appear in this area
Connection Setup
GPRS available
There are more notifications.
In the enlarged Title Bar, tap
to view all
New text messages;
SMS notification of voice mail
EDGE available
HSDPA available
To go to the next or previous messaging account
While on a messaging account screen, you can slide your finger across the
screen to go to next or previous messaging account.
UMTS available
Connection is active
Connection is not active
Receiving MMS message
New MMS message received
Sending MMS message
MMS message sent
Synchronization in progress
Cannot send MMS message
New instant message from
Live Messenger
Missed call
Speakerphone on
Roaming
Alarm
TouchFLO settings
You can enable or mute the finger scrolling and panning sound. Tap Start >
Settings > System tab > TouchFLO then select or clear the Enable sound
when finger scrolling and panning check box.
Bluetooth stereo headset
detected
ActiveSync notification
Synchronization error
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢀ Getting Started
Getting Started ꢂꢁ
1.11 Programs
The following are programs that are preinstalled on your device.
Programs in the Start Menu
Icon
Description
Icons that appear in this area
Icons that appear in this area
Vibration mode
Sound on
Office Mobile Use the complete suite of Microsoft® Office applications
for your mobile device.
GPRS connecting
GPRS in use
Excel Mobile Create new workbooks or view and edit
Microsoft® Office Excel® workbooks.
Sound off
EDGE connecting
EDGE in use
PowerPoint Mobile View Microsoft® Office PowerPoint® slides
and presentations.
Word Mobile Create, view, and edit Microsoft® Office Word
documents.
HSDPA connecting
HSDPA in use.
Icons that appear in this area
Battery charging
Calendar Keep track of your appointments and create meeting
Battery full
requests.
UMTS connecting
Battery very low
Contacts Keep track of your friends and colleagues.
UMTS in use
Internet Explorer Mobile Browse Web and WAP sites as well as
download new programs and files from the Internet.
Maximum signal strength
No signal
Messaging Send and receive e-mail, MMS, and text messages.
Phone is turned off
No phone service.
Phone Make and receive calls, switch between calls, and set up
conference calling.
Searching for phone service
Voice call in progress
Call on hold
Help See Help topics for the current screen or program.
Programs screen
Calls are forwarded
Dialing while no SIM card is inserted
No SIM card inserted
Icon
Description
Games Play two pre-installed games: Bubble Breaker and Solitaire.
ActiveSync Synchronize information between your device and a PC or
the Exchange Server.
Adobe Reader LE View PDF (Portable Document Format) files on your
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂ Getting Started
Getting Started ꢂꢃ
Icon
Description
Icon
Description
Audio Booster Enhances your music experience by providing you with
controls for adjusting equalizer, ꢁD sound, treble, and bass settings.
SAPSettings Enable Bluetooth Remote SIM access on your device.
Search Search contacts, data, and other information on your device.
Audio Manager Browse and play back music files.
SIM Manager Manage the contacts that are stored on your SIM card.
You can also use this program to copy SIM contents to Contacts on your
device.
Bluetooth Explorer Search for other Bluetooth devices that have file
sharing enabled and access their Bluetooth shared folder.
Calculator Perform basic arithmetic and calculations, such as addition,
subtraction, multiplication, and division.
Sprite Backup You will find this program in the provided disc. You can
install and use this program to back up your data and files. See Chapter
ꢅ for details.
Camera Take photos or shoots video clips with accompanying audio.
STK (SIM Tool Kit) Service Access information and other services
offered by your wireless service provider.
Camera Album View photos that you captured using the device's
camera.
Streaming Media Stream live or on-demand video.
Tasks Keep track of your tasks.
Comm Manager Manage your device’s connections (including GPRS/ꢁG,
Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/
vibration mode, enable or disable the Direct Push function, and more.
Voice Recorder Record your voice, play it back, then send it via e-mail,
MMS or beaming. You can also set the recorded voice as your ring tone.
File Explorer Organize and manage files on your device.
Flash Lite Player Play back Flash Lite™ files on your device.
Voice Speed Dial Record voice tags so that you can dial a phone
number or launch programs simply by speaking a word.
Internet Sharing Connect your computer to the Internet using your
device's data connection.
Windows Live Use this mobile version of Windows Live™ to find
information on the Web. It also lets you sign into your Windows Live
account so that you can access your Live Mail messages and send/receive
instant messages in Live Messenger.
Spb GPRS Monitor You will find this program in the provided disc. You
can install and use this program to measure the amount of data transfers
that you have made via the GPRS/ꢁG or GSM network connection, and
calculate network usage costs. See Chapter 1ꢁ for details.
Windows Media Player Mobile Play back audio and video files.
Java Download and install Java applications, such as games and tools,
on your device.
ZIP Save memory and free up storage space on your device by
compressing files in the conventional ZIP format.
Messenger Use this mobile version of Windows Live Messenger to send
and receive instant messages on your device.
Notes Create handwritten or typed notes, drawings, and voice
recordings.
Pictures & Videos View, organize, and sort pictures, animated GIFs, and
video files on your device or a storage card.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ6 Getting Started
Getting Started ꢂ7
System tab
1.12 Settings
Icon
Description
You can adjust the device settings to suit the way you work. To see all
available settings, tap Start > Settings, then tap the Personal, System, and
Connections tabs located at the bottom of the screen.
About This is where you can see basic information such as the Windows
Mobile® version and type of processor used on your device. You can also
specify a name for your device.
Personal tab
Backlight Set the backlight timeout and adjust brightness.
Icon
Description
Certificates See information about certificates that are installed on your
device.
Buttons Assign a program or function to a hardware button.
Clear Storage Tap this icon only when you need to remove all your
data and files from the memory and reset your device to factory default
settings.
Input Set options for each of the input methods.
Large Start Menu Enable or disable the large Start menu.
Clock & Alarms Set the device clock to the date and time of your locale
or to a visiting time zone when you’re traveling. Alarms can also be set at
specified days and times of a week.
Lock Set a password for your device.
Device Information See information about the firmware version,
hardware, identity, and the duration of calls made on your device.
Menus Set what programs will appear in the Start menu.
Owner Information Enter your personal information on your device.
Device Lock Select the Enable auto device lock check box to
automatically lock the device when the backlight turns off.
Encryption Allow files on your storage card to be encrypted. Encrypted
files will be readable only on your device.
Phone Customize phone settings such as ring tone, set a PIN number for
your SIM card, and more.
Error Reporting Enable or disable the device's error reporting function.
When this function is enabled and a program error occurs, technical data
about the state of the program and your computer will be logged in a
text file and delivered to Microsoft's technical support if you choose to
send it.
Sounds & Notifications Enable sounds for events, notifications, and
more, and set the type of notification for different events.
TTY Enable TTY (Teletypewriter) support for your device.
External GPS Set the appropriate GPS communication ports, if required.
You may need to do this when there are programs on your device that
access GPS data or you have connected a GPS receiver to your device.
See Help for details.
Today Customize the appearance and the information to be displayed
on the Today screen.
Voice Speed Dial Create voice tags for voice dialing contacts and SIM
contacts as well as for launching programs.
Key Lock Lock the buttons on your device except for the POWER button
when the device is in Sleep mode. This ensures you will not switch the
device on by accident and consume unnecessary power.
Keypad QuickTasks Enable or disable the QuickTasks screen when you
open the front panel of the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢄ Getting Started
Getting Started ꢂꢅ
Connections tab
Icon
Description
Long Press End Key Lets you set the behavior when you press and hold
the END key.
Icon
Description
Beam Set your device to receive incoming Bluetooth beams.
Memory Check the device memory allocation status and memory card
information. You can also stop currently running programs.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Microphone AGC Adjust the volume of your voice automatically when
you are recording.
Comm Manager Manage your device’s connections (including GPRS/ꢁG,
Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/
vibration mode, enable or disable the Direct Push function, and more.
Power Check the remaining battery power. You can also set the timeout
for turning off the display (switching device to Sleep mode) to conserve
battery power.
Connection Setup Configure your device’s data connections, such
as GPRS, WAP, and MMS, based on the detected or selected network
operator. See Chapter 10 for details.
Regional Settings Set the regional configuration to use, including the
format for displaying numbers, currency, date, and time on your device.
Connections Set up one or more types of modem connections for your
device, such as phone dial-up, GPRS, and more, so that your device can
connect to the Internet or a private local network.
Remove Programs Remove programs that you installed on your device.
Screen Change the screen orientation, re-calibrate the screen, and
CSD Line Type Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
change the screen text size.
Task Manager Stop running programs and set the Exit button
(
) to end programs immediately when you tap the button. For more
information, see "Task Manager" in Chapter 1ꢀ.
GPRS Setting Set the GPRS authentication method.
TouchFLO You can enable or mute the finger scrolling and panning
sound. See "TouchFLO settings" in this chapter for details.
HSDPA Turn on or off High Speed Data Packet Access (HSDPA), a ꢁ.ꢃG
high-speed digital data service that provides downstream data rates up
to ꢁ.6 Mbps. Your wireless service provider must support this feature to
be able to turn it on.
Windows Update Update Windows Mobile® on your device with the
latest updates, security patches or fixes, if they are available.
Network Cards Set up your device's network card.
SMS Service Set your device to send SMS text messages via a data
connection, such as GPRS or a circuit-switched connection.
USB to PC Set a USB serial connection between your device and PC
when there are problems connecting ActiveSync.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ0 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Entering and Searching
Information
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢀ Entering and Searching Information
Entering and Searching Information ꢃꢁ
To toggle between showing and hiding the Input Panel, simply tap the
Input Panel icon.
2.1 Entering Information
When you start a program or select a field that requires text or numbers,
you can either use the ꢀ0-key QWERTY hardware keyboard or one of the
onscreen input methods to enter information.
Input Panel
(Touch
Keyboard)
20-key QWERTY hardware keyboard
To reveal the ꢀ0-key QWERTY keyboard, slide up the front panel of the
device.
Input Selector
arrow
Input Panel icon
Icon
Input method
Onscreen Keyboard
Touch Keyboard
Touch Keypad
Letter Recognizer or Block Recognizer
Transcriber
Tip
When dialing phone numbers, use the ꢀ0-key QWERTY keyboard.
Onscreen input methods
When you start a program or select a field that requires text or numbers, the
Input Panel icon becomes available on the menu bar.
Note
Some text input methods may not be available in certain language versions
of the device.
Tap the Input Selector arrow (that appears next to the Input Panel icon)
to open a menu where you can select a text input method and customize
input options. After selecting a text input method, the corresponding Input
Panel is then displayed and you can use it to enter text.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢂ Entering and Searching Information
Entering and Searching Information ꢃꢃ
XT9 mode
2.2 Using the 20-key QWERTY Hardware Keyboard
To form a word in XTꢅ mode, press the keys that contain the letters you
want. As you enter letters, XTꢅ analyzes your keypresses and attempts
to complete the word. XTꢅ also tries to predict your next word based on
previous sentences you have type.
You can enter text, numbers, and symbols by using the ꢀ0-key QWERTY
keyboard. When you select a field that requires entering text or numbers,
the phone automatically selects the appropriate input mode.
To enter text in XT9 mode
To change the input method, press and hold
method you want to use on the menu.
and select the input
1. Press and hold the
key.
You can do the following with the ꢀ0-key QWERTY keyboard:
2. On the menu, select XT9 English.
•
To use all uppercase letters, press
lowercase letters, press again.
twice. To change back to all
and then press the
To change XTꢅ settings, press and hold
Settings.
and on the menu, select XT9
•
•
To use a single uppercase letter, press
corresponding key.
Tip
To type in all uppercase letters, press the
key twice.
While typing, words will appear at the bottom of the screen. Use the
NAVIGATION CONTROL to choose the word you want to insert and press
ENTER.
To enter a number or symbol (labeled in blue color), press
then press the corresponding key.
and
•
•
Press
to open the Symbol pad.
Numeric mode
Input numbers by changing the input method to Numeric mode.
Press
character.
to insert a hard return. Press
to delete the previous
To enter numbers
1. Press and hold the
key and select 123 on the menu.
•
•
Press and hold
Press and hold
to access your voicemail.
to toggle between Vibrate and Ringer modes.
2. On the keyboard, enter the number(s) you want.
Multipress mode
In Multipress mode, you enter a character by pressing the key on which the
character appears.
To enter text in Multipress mode
•
To enter the first character, press once. To enter the second character,
press twice, and so on.
•
To enter characters that are on the same key, wait for the highlight on
the character to disappear before you press the key again.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ6 Entering and Searching Information
Entering and Searching Information ꢃ7
To use the Touch Keyboard
1. Start a program that accepts user input, such as Word Mobile.
2.3 Using the Onscreen Keyboard
The onscreen Keyboard is available when text entry is possible. You can
enter text by tapping keys on the keyboard that are displayed on the screen.
2. Tap the Input Selector arrow, and tap Touch Keyboard.
3. Enter text by tapping keys on the onscreen Keyboard. The way you
enter characters using the Touch Keyboard is similar to using the
ꢀ0-key keyboard; please see “Using the ꢀ0-key Hardware Keyboard”
earlier in this chapter for details.
To enter text using the onscreen Keyboard
1. In a program, tap the Input Selector arrow, and tap Keyboard.
2. Enter text by tapping keys on the onscreen Keyboard.
To change Touch Keyboard and XT9 settings
1. Tap the Input Selector arrow, and tap Options.
2.4 Using Touch Keyboard
2. In the Input Method tab, select Touch Keyboard in Input method
and tap Options.
The Touch Keyboard is an onscreen keyboard layout similar to the ꢀ0-key
hardware keyboard of your device. With the enlarged keys and input
enhancement, you can type faster and more accurately using the Touch
Keyboard.
Tip
You can change the keyboard layout by changing the Language.
3. Tap XT9 Settings. On the XTꢅ Settings screen, select the options you
want and tap Done.
Displays the word
candidate list in XTꢅ
mode. Tap to insert
the word into the
message. Tap the
+ symbol to add a
word.
Tap to enter
2.5 Using Touch Keypad
letters or symbols.
Tap and hold to
immediately enter
the symbol on top
of the key.
The Touch Keypad is an onscreen keypad layout similar to a 1ꢀ-key keypad
with some additional keys. With the enlarged keys and input enhancement,
you can input text faster and more accurately using the Touch Keypad.
Tap to enter letters or
Tap to delete the
previous character.
Displays the word
candidate list in XTꢅ
mode. Tap to insert
the word into the
message. Tap the
+ symbol to add a
word.
Tap to enter
uppercase letters;
Tap twice to caps
lock.
numbers. Tap and hold
to immediately enter the
number on top of the key.
Tap to create a
new line.
Tap to enter
uppercase letters;
Tap twice to caps
lock.
Tap to open the Symbol pad.
See “Using Symbol Pad.”
Tap to cycle through the input
methods: XTꢅ, multitap, and numeric.
The keyboard changes to a numeric
keyboard when in numeric mode.
Tap to create a
new line.
Tap to cycle through
Tap to delete the
previous character.
the input methods: XTꢅ,
multitap, and numeric.
The keypad changes to a
numeric keyboard when
in the numeric mode.
Tap to open the Symbol pad.
See “Using Symbol Pad.”
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢄ Entering and Searching Information
Entering and Searching Information ꢃꢅ
To use the Touch Keypad
1. Start a program that accepts user input, such as Word Mobile.
To change Symbol Pad settings
1. Tap the Input Selector arrow, and tap Options.
2. Tap the Input Selector arrow, and tap Touch Keypad.
2. In the Input Method tab, select Touch Keyboard in Input method
and tap Options.
3. Enter text by tapping keys on the onscreen keypad. See “Multipress
mode”, “XTꢅ mode”, and “Numeric mode”to learn how to enter
characters.
3. Select the Turn on one-touch symbol entry check box to select only
one symbol at a time and immediately close the Symbol Pad after
your selection. To be able to input several symbols at a time, clear this
check box.
To change Touch Keypad and XT9 settings
Refer to “To change Touch Keyboard and XTꢅ settings.”Select Touch
Keypad instead of Touch Keyboard in Input method.
2.7 Using Letter Recognizer
2.6 Using Symbol Pad
With Letter Recognizer, you can write individual letters, numbers, and
punctuation, which are then converted into typed text.
Symbol Pad provides a comprehensive list of common symbols such as
parentheses, braces, currency signs, and more, as well as punctuation
marks and special characters. The Symbol pad is available for both Touch
Keyboard and Touch Keypad.
Note
Letter Recognizer is available when text entry is possible.
To use Letter Recognizer
1. From a program, tap the Input Selector arrow, and tap Letter
Recognizer.
2. Write characters, numbers, and symbols in the designated writing
area.
•
•
Enter uppercase letters by writing in the ABC (left) area of the box.
Tap a symbol to insert it into the message.
Enter lowercase letters by writing in the abc (middle) area of the
box.
Tap to close the Symbol Pad without
selecting any symbol.
Tap to display the previous page of symbols.
•
•
Enter numbers by writing in the 123 (right) area of the box.
Enter punctuation and symbols by tapping in either area of the
box and then writing the desired character.
Tap to display the next page of symbols.
Indicates the current page and the total
number of symbol pages. Tap to go to the
next page of symbols.
Tip
For help with writing characters, tap the question mark near the writing
area.
To open the Symbol Pad
While using Touch Keyboard or Touch Keypad, tap
.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Entering and Searching Information
Entering and Searching Information 61
To enter punctuation and symbols
Transcriber comes with an onscreen keyboard that provides an easy way to
add punctuation or a special symbol to existing text. To use this onscreen
2.8 Using Block Recognizer
With Block Recognizer, you use a single stroke to write letters, numbers,
symbols, and punctuation, which are then converted into typed text.
keyboard, tap
on the Transcriber toolbar.
The keyboard remains visible until you tap the button again.
Note
Block Recognizer is available when text entry is possible.
Tips
•
•
To reposition the keyboard, tap and hold the title bar, then drag to the
desired location.
To use Block Recognizer
1. From a program, tap the Input Selector arrow, and tap Block
Recognizer.
When no text is selected, you can also open the keyboard by doing the
gesture. For more information about using Transcriber gestures, see Help
on your device.
2. Write characters, numbers, and symbols in the designated writing
area.
To edit text
•
•
•
Enter letters by writing in the abc (left) area of the box.
Enter numbers by writing in the 123 (right) area of the box.
1. In a program, draw a line from left to right across the text you want to
edit.
Enter symbols and punctuation by tapping in either area of the
box and then writing the desired character.
2. After you lift the stylus from the screen, the line will disappear and the
selected text will be highlighted.
Tip
For help with writing characters with Block Recognizer, tap the
question mark near the writing area.
3. Do either of the following:
•
•
Rewrite the text.
Use gestures to capitalize letters, insert a space, and so on. For
information about using Transcriber gestures, see Help on your
device.
2.9 Using Transcriber
Transcriber is a handwriting recognition program that allows you to write
in cursive, print, or a combination of both.
To write using Transcriber
1. Start a program that accepts user input, such as Word Mobile.
2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber
introductory screen appears.
3. Position the cursor where you want text to appear.
4. Use the stylus to write anywhere on the screen. The handwriting will
be converted to text shortly after you lift the stylus from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
6ꢀ Entering and Searching Information
2.10 Searching Information
You can search for files and other items stored in My Documents folder or
on an installed storage card of your device. You can search by file name
or by words located in the item. For example, you can search in e-mail
messages, notes, appointments, contacts, and tasks, as well as in online
Help.
To search for a file or an item
1. Tap Start > Programs > Search.
2. In the Search for field, you can:
•
Enter the file name, word, or other information you want to search
for.
•
Tap the down arrow icon ( ), and from the list, select an item
that you have looked for before.
3. In the Type field, you can tap the down arrow icon ( ) and select a
data type from the list to help narrow your search.
4. Tap Search. The system then starts searching the matched files in the
My Documents folder and subfolders.
5. In the Results list, tap the item you want to open.
Note
The storage card symbol (
on a storage card.
) is displayed next to the names of files saved
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Using Phone Features
3.6 Smart Dial
Download from Www.Somanuals.com. All Manuals Search And Download.
6ꢂ Using Phone Features
Using Phone Features 6ꢃ
Airplane Mode
3.1 Using the Phone
Another way to turn off the phone function is to switch your device to
Like a standard mobile phone, you can use your device to make, receive,
Airplane Mode.
and keep track of calls and send messages. You can also dial directly
from Contacts, and easily copy phonebook entries from your SIM card to
Contacts on your device.
To enable or disable Airplane Mode
When you enable Airplane Mode, it turns off all wireless radios on your
device, which include the phone function and Bluetooth. When you disable
Airplane Mode, it turns the phone function back on. This also restores the
previous state of Bluetooth.
The Phone screen
From the Phone screen, you can access Call History, Speed Dial, and Phone
settings. To open the Phone screen, do one of the following:
1. Tap Start > Programs > Comm Manager.
2. On the Comm Manager screen, tap the Airplane Mode button to
enable or disable Airplane Mode. When enabled, the ON indicator is
activated.
•
•
Tap Start > Phone.
Press the TALK button.
TALK
button
•
While on the Today screen,
open the keyboard and
then press a numeric key.
Adjust the device volume
1. Tap the Speaker icon (
).
2. Under Volume, do the following:
Enter your PIN
•
•
Adjust the phone volume (
device volume ( ) by moving the
slider to the desired volume level.
) or
Most SIM cards are preset with a PIN (personal identification number) that is
provided by your wireless service provider.
1. Enter the preset PIN assigned by your wireless service provider.
2. Tap Enter.
Tap On, Vibrate, or Off to change both
the system and ringer volume settings.
Note
If your PIN is entered incorrectly three times, the SIM card will be blocked. If
this happens, you can unblock it with the PUK (PIN Unblocking Key) obtained
from your wireless service provider.
Notes
•
•
To adjust the conversation phone volume, you must do it during a call.
Adjusting the volume at another time will affect the ring, notification, and
MPꢁ sound levels.
When you activate Vibrate mode, sound will automatically be muted and
your device will vibrate when an incoming call is received. The Vibrate
Turn the phone function on and off
In many countries, you are required by law to turn off the phone while on
board an aircraft.
icon (
) will appear in the title bar to indicate that Vibrate mode is
activated.
To enable or disable the phone function
1. Tap Start > Programs > Comm Manager.
Tip
You can also use the VOLUME BUTTONS on the left side of the device to
adjust the device volume or the volume during a call.
2. On the Comm Manager screen, tap the Phone button to enable
or disable the phone function. When enabled, the ON indicator is
activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Using Phone Features
Using Phone Features 67
Make a call from TouchFLO
3.2 Making a Call
To place a call to a favorite contact that you added to TouchFLO’s Touch
Cube, follow these steps:
With your device, you can make a call from Phone, Contacts, TouchFLO,
Speed Dial, Call History, and SIM Manager.
1. Open the Touch Cube by sliding your finger upward, starting from the
bottom of the touch screen where it shows a logo image.
(See Chapter 1 for detailed instructions.)
Make a call from Phone
1. While on the Today screen, open the
keyboard of the device.
2. Slide your finger left or right to rotate the cube and navigate to the
screen where it shows your favorite contacts.
2. Start pressing the numeric keys on
the keyboard to enter the phone
number.
3. Touch the photo or name of the contact whom you want to call.
3. Press the TALK button on your device
to place the call.
Tip
If you press a wrong number, press
to erase each subsequent
digit of a number. To erase the entire
number, press and hold
.
Make a call from Contacts
Tap Contacts on the Today screen or tap Start > Contacts, then do one of
the following:
•
•
Press NAVIGATION up or down to select a contact, and press TALK.
Tap the desired contact in the contacts list, and tap the phone
number that you want to call.
Tap and hold the desired contact, and on the shortcut menu, tap Call
Work, Call Home, or Call Mobile.
Tip
Touch and hold the contact to open the contact's summary.
Make a call from Call History
1. On the Phone screen, tap the Call History button (
•
).
2. Touch the tab where you want to look. The tabs represent the
different types of calls on the device. The tabs are arranged by (from
left to right): Outgoing calls, Incoming calls, Missed calls, and All calls.
To choose one of the numbers of a contact to dial
By default, the mobile phone number (m) of a contact is dialed when you
make a call from Contacts. However, you can specify that a different phone
number is dialed instead.
3. Finger-scroll to the desired contact or phone number, and press TALK.
1. Tap Start > Contacts.
One-touch Speed Dial
Use Speed Dial to call frequently-used numbers with a single press. For
example, if you assign a contact to the location 2 in Speed Dial, you can
2. Press NAVIGATION up or down to select the contact.
3. Press NAVIGATION left or right. The letters representing the number
will change as you scroll through them.
simply press and hold
on the keyboard to dial the contact’s number.
Download from Www.Somanuals.com. All Manuals Search And Download.
6ꢄ Using Phone Features
Before you can create a Speed Dial entry, the number must already exist in
Using Phone Features 6ꢅ
3.3 Receiving a Call
Contacts.
When you receive a phone call, a message will appear, giving you the
option to either answer or ignore the incoming call.
To create a Speed Dial entry
1. On the Phone screen, tap Menu > Speed Dial.
To answer or reject an incoming call
2. Tap Menu > New.
•
•
•
To answer the call, tap Answer, or press TALK on the device.
To reject the call, tap Ignore, or press END on the device.
Open the keyboard.
3. Tap a contact. Select the phone number that you want to add to be
assigned with a speed dial key.
4. In the Location box, select an available key to use as the speed dial
key.
Note
For you to be able to answer calls by opening the keyboard, the Slide
keypad to answer call check box must be selected. To check, tap Start >
Settings > Personal tab > Phone > Advanced tab.
Note
Tips
If you want to place a phone number in a position that is already occupied,
the new number will replace the number that is already there.
To reject a call and send a text message
When you reject a call, you can choose to automatically send a text
message to the caller.
•
To create a Speed Dial entry from Contacts or SIM card contacts, tap the
contact, select the number you want to add to Speed Dial and then tap
Menu > Add to Speed Dial.
•
To delete a Speed Dial entry, in the Speed Dial list, tap and hold the
desired entry, and tap Delete.
1. On the Phone screen, tap Menu > Options > Advanced tab.
2. Select the Reject call with text message check box. Change the
default message if needed.
To call voicemail
The number 1 key is generally reserved for your voicemail. Tap and hold
After enabling Reject call with text message, you can:
this button on the Phone screen or press and hold
keyboard to call voicemail.
on the hardware
•
Tap Send Text when you receive a call to reject the call and send a
text message to the caller.
•
Tap Silence when you receive a call to mute the ringing sound
without rejecting the call.
Make a call from SIM Manager
SIM Manager allows you to view the contents of your SIM card, transfer SIM
phonebook entries to Contacts on your device, and make a call from your
SIM card.
Note
When the Reject call with text message option is selected, you need to
press the TALK button on the device to answer calls.
To end a call
To call a SIM contact
1. Tap Start > Programs > SIM Manager. Wait for your SIM card
contents to load.
Once an incoming or outgoing call is in progress, you can tap End or press
END on the device to hang up.
2. Tap and hold the name or phone number of the person you want to
call, and tap Call.
For more information about SIM Manager, see Chapter 6.
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Using Phone Features
To add a new phone number to your Contacts list after a call
Using Phone Features 71
To set up a conference call
If the number of the person who called is not in your Contacts list, you can
choose to save the number after you hang up. To enable this feature, tap
Start > Settings > Personal tab > Phone > Advanced tab and select the
Add new phone number to Contacts at end of call check box. Selecting
the checkbox will pop up a message after a phone call ends to let you add
the number to your Contacts list.
1. Either put a call on hold, and dial a second number; or, accept a
second incoming call when you already have one in progress.
2. Tap Menu > Conference.
Note
Not all service providers support conference calling. Contact your service
provider for details.
To turn on and off the Speakerphone
The built-in Speakerphone on your device allows you to talk hands-free or
lets other people listen to the conversation.
To check a missed call
You will see the
icon on top of the screen when you missed a call. To
check who the caller is:
•
During a call, tap Speaker On, or press and hold TALK until the
•
•
Tap the
icon, then tap View.
speakerphone turns on. The speakerphone icon (
title bar.
) appears in the
On the Phone screen, tap the Call History button (
view missed calls as well as incoming and outgoing calls in Call
History.
). You can
•
To turn off the speakerphone, tap Speaker Off, or press and hold
TALK again until the speakerphone turns off.
To set a reminder for missed calls
You can set the device to make a beeping sound every ꢀ minutes to remind
you of a missed call.
Warning! To avoid damage to your hearing, do not hold your device against your ear
when the Speakerphone is turned on.
To mute a call
1. On the Phone screen, tap Menu > Options > Advanced tab.
2. Select the Enable missed call reminder sound check box
You can turn off the microphone during a call, so that you can hear the
caller but the caller cannot hear you.
•
During a call, tap Mute.
To put a call on hold
Your device notifies you when you have another incoming call, and gives
you the choice of rejecting or accepting the call. If you are already on a call
and accept the new call, you can choose to switch between the two callers,
or set up a conference call between all three parties.
•
When the microphone is turned off, the mute icon (
the screen. Tap Unmute to turn on the microphone again.
) appears on
1. Tap Answer to take the second call, and put the first one on hold.
2. To end the second call and return to the first call, tap End or press
END on the device.
To switch between two calls
Tap Swap.
Download from Www.Somanuals.com. All Manuals Search And Download.
7ꢀ Using Phone Features
Using Phone Features 7ꢁ
1
2
3
Status area. Displays your service
provider name, the other party's
information, and call timer.
3.4 Making a Video Call
Your device allows you to make video calls when you are within a ꢁG
network coverage area. You need to use a ꢁG enable SIM card to make video
calls.
1
Image display area. Displays your image
and the other party's image, depending
on the selected Swap Image setting.
To make a video call
Camera On/Off. Tap to toggle between
turning on/off the camera. When the
camera is turned off, the image displayed
depends on the Video Call options you
have set. See “Set up Video Call Options”
for details.
•
•
On the Phone keypad, tap the phone number to call, then tap
.
2
3
On the Phone keypad, tap the phone number to call, then tap
Menu > Video Call to start a video call.
•
•
From Contacts, tap and hold the desired contact, and tap Video Call.
4
5
Audio Mute/Unmute. Tap to mute/
unmute audio.
From Call History, tap and hold the desired phone number or contact,
and tap Video Call.
6
4
5
Main/Second camera. Tap to toggle
between using the Main (back) and
Second (front) camera.
Note
The other party’s image will appear on the screen about ꢁ to ꢃ seconds after
a connection is established, depending on the signal strength. The streaming
images quality may also be influenced by the signal.
6
Swap Image. Tap continuously to cycle
through the available image display
options.
When the video call is unsuccessful, a message pops up asking you if you
want to try again, make a voice call instead, or send an SMS/MMS message.
Change Video Call settings
Swap Image options
While on a video call, you can change certain settings such as the size of the
image, brightness of the image, the camera to use, and more.
The other party's image is large while your
image is small. This is the default setting.
Both parties
(My video small)
The following shows the Video Call screen and control buttons during an
ongoing call.
The other party's image is small while your
image is large.
Both parties
(My video large)
Both your image and the other party appear
the same size.
Both parties (equal)
Other party only
Only the other party's image is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
7ꢂ Using Phone Features
Adjust the brightness
Using Phone Features 7ꢃ
General tab
•
Show still image. Select the image you want to display when you
turn off the camera.
To adjust the brightness of the image,
press NAVIGATION right to make it
brighter or press NAVIGATION left to
make it less bright. When you press
NAVIGATION left or right during a video
call, a brightness bar appears at the
bottom of the screen.
•
•
•
Preset (female). Displays a female picture in place of your image.
Preset (male). Displays a male picture in place of your image.
Custom image. Lets you use an image from file as your display
picture. When this option is selected, the File Name box and the
Browse button will be enabled, allowing you to select an image
file.
•
Last video frame. Uses the last video frame before you stopped
the camera as your display image.
•
•
Video screen preference. To change how your image and the other
party’s image are displayed on the screen, select your preference from
the Video screen preference list or tap the Swap Image button on
the Video Call screen.
Brightness bar
Tips
•
•
You can also press NAVIGATION up or down to adjust the brightness.
You can also adjust the brightness by tapping Menu > Brightness.
Camera options:
•
Flip the 2nd camera video. Select this check box if you are going
to show a text document to the other party using the second
camera.
Set up video call options
On the Phone screen, or on the screen of the ongoing video call,
tap Menu > Video Call Options. You can set the following options:
•
Switch camera off when answering video call. Select this check
box to not send a video feed of yourself to the other party. Instead,
the option you selected in Show still image will be displayed.
•
Display info:
•
Show call timer. Select this check box to display the call period in
the status area.
•
Show phone number and name. Select this check box to display
the other party’s phone number and name in the status area.
Services tab
To set up further calling options for Video Call, tap the Services tab. On
the Services screen, select the desired service from the list, then tap Get
Settings to access its settings.
Video Call Options: General tab
Video Call Options: Services tab
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Using Phone Features
Using Phone Features 77
If the matching list is long and you want to narrow down the search further,
enter another letter. Using the same example above, if you continue to
tap “ꢁ”which is associated with [d, e, f], the matching list will be narrowed
down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”,
“Dixon, Allan”.
3.5 Receiving a Video Call
To answer or reject an incoming video call
•
To answer the video call, tap Answer, or press TALK on your device.
•
To reject the video call, tap Ignore, or press END on your device.
To end a video call
Once an incoming or outgoing video call is in progress, press END on the
device to hang up.
Make a call or send a text message using Smart Dial
1. Press the TALK button on your device to open the Phone screen.
2. Begin entering the first few numbers or characters.
When you start entering a number or letter, the Smart Dial panel will
display matches found.
3.6 Smart Dial
3. In the Smart Dial panel, browse the list by sliding your finger or the
Smart Dial makes it easy for you to
dial a phone number.
stylus up or down or by pressing NAVIGATION up or down.
4. You can do one of the following:
When you start entering a phone
number or contact name, Smart Dial
will automatically search and sort
the contact entries on the SIM card,
in Contacts, and the phone numbers
in Call History (including incoming,
outgoing, and missed calls). You can
then select the desired number or
contact from the filtered list to dial.
•
•
•
When the desired contact is selected, press the TALK button to
place a call.
Smart
Dial
panel
To send a text message to the selected contact, tap Menu > Send
Text Message.
To call a different phone number associated with the selected
contact, tap the contact, select the phone number you want to
call, and then press TALK.
To find a contact name or number
You can just enter the first letter of the name or number of a contact.
Smart Dial will search for contact phone numbers and the first character
of a contact name as well as from the character that appears after a space,
dash, or underscore in a contact name. For example, if you tap number “ꢀ”
on the phone keypad, which is associated with [a, b, and c] on the Phone
keypad, contact names such as the following will be considered matches:
“Ben Miller”, “George Adams”, “John-Carter”, “Carter, Ellen”, “Dixon, Allan”,
“Thomas_Clark”, “JaneCampbell”.
Download from Www.Somanuals.com. All Manuals Search And Download.
7ꢄ Using Phone Features
Using Phone Features 7ꢅ
3. On the BT Remote SIM Access screen, select the Remote SIM Access
check box then tap Done.
3.7 Additional Dialing Information
4. Connect the car kit phone to your device via Bluetooth. To learn how
Make an emergency call
to connect, consult your car kit phone’s manual.
•
Enter the international emergency number for your locale, and press
5. If this is the first time you are pairing the car kit phone with your
the TALK button on your device.
device, enter the car kit’s passcode on your device.
Tip
Additional emergency numbers may be included in your SIM card. Contact
your service provider for details.
6. A pop-up message should appear on your device saying that a
connection has been established between your device and car kit
phone. Tap OK.
Make an international call
7. On the BT Remote SIM Access screen, tap Done.
1. Press and hold
on the hardware keyboard (or tap and hold the
Note
You will not be able to make/receive calls, send/receive messages or perform
related activities on your device when the SIM Access Profile connection is
active. You’ll be able to do all these from the car kit phone during this time.
After the connection is disconnected, you will be able to use your device as
before.
number 0 key on the phone screen) until the + sign appears.
The + replaces the international prefix of the country that you are
calling.
2. Enter the full phone number you want to dial, and press the TALK
button on your device. The full phone number includes country code,
area code (without the leading zero, if any) and phone number.
3.8 Setting Up Bluetooth SIM Access for
Car Kit Phones
Bluetooth car kits that support the SIM Access Profile (SAP) can connect to
your device and access its SIM card via Bluetooth. Once a SAP connection
has been established, you can download SIM contacts from your device to
the car kit phone. You can also use the car kit phone to answer and make
calls using your device’s SIM card.
Note
To enable downloading contacts onto the car kit, ensure that all contacts
on the device are stored in the SIM card and not in the device memory.
Configure the car kit to download contacts only from the SIM card.
1. On your device, make sure that Bluetooth is turned on and set to
visible mode. For information about turning on Bluetooth and
enabling visible mode, see “Bluetooth modes”in Chapter 10.
2. Tap Start > Programs > SAPSettings.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄ0 Using Phone Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Setting Up Your Device
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢀ Setting Up Your Device
Setting Up Your Device ꢄꢁ
To set the backlight to dim after a time delay
1. Tap Start > Settings > System tab > Backlight.
4.1 Basic Settings
Time and date
2. Tap the Battery power tab, or the External power tab.
To set the time and date
1. Tap Start > Settings > System tab > Clock & Alarms > Time tab.
3. Select the Turn off backlight if device is not used for check box, and
specify the time delay.
2. Select the correct time zone and change the date or time.
To increase or decrease the size of text on the screen
1. Tap Start > Settings > System tab > Screen > Text Size tab.
Note
During synchronization, the time on your device is updated with the time on
your PC.
2. Move the slider to increase or decrease the text size.
To set the time and date for a different location
If you visit or communicate with someone in a particular time zone often,
you can select it as your visiting time zone.
Device name
The device name is used to identify your device in the following situations:
•
•
•
Synchronizing with a PC
1. Tap Start > Settings > System tab > Clock & Alarms > Time tab.
2. Tap Visiting.
Connecting to a network
Restoring information from a backup
3. Select the correct time zone and change the time or date.
Note
If you synchronize multiple devices with the same PC, each device must have
a unique name.
Regional settings
The style in which numbers, currency, dates, and times are displayed is
specified in regional settings.
To change the device name
1. Tap Start > Settings > System tab > About.
1. Tap Start > Settings > System tab > Regional Settings.
2. On the Region tab, select your region from the list.
2. Tap the Device ID tab.
3. Enter a name.
Note This does not change the Operating System language of your device.
Note The device name must begin with a letter, consist of letters from A to
Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore
character to separate words.
3. The region you select determines which options will be available on
the other tabs.
4. To customize settings further, tap the appropriate tabs and select the
Ringer settings
desired options.
To change the ring type and ring tone
1. On the Phone screen, tap Menu > Options > Phone tab.
Display settings
To adjust screen brightness
1. Tap Start > Settings > System tab > Backlight > Brightness tab.
2. In the Ring type list, choose whether to be notified of incoming calls
by a ring, a vibration, or a combination of both.
3. In the Ring tone list, tap the sound you want to use.
2. Move the slider to adjust the brightness.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢂ Setting Up Your Device
Setting Up Your Device ꢄꢃ
Tip
You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files
Phone services
that you downloaded from the Internet or copied from your PC as ring
tones. For a complete list of supported audio file formats for ring tones, see
"Specifications" in the Appendix.
Your device can directly link to the mobile phone network, and allow
you to access and change the settings of various phone services for your
device. Phone services may include Call Forwarding, Call Waiting, Voicemail,
and more. Contact your wireless service provider to find out about the
availability of phone services for your device.
To use your sound files as ring tones, copy them first to the /My Documents/
My Ringtones folder on your device, then select the sound from the Ring
tone list of your device. For more information about copying files, see
Chapter ꢅ.
To access and change settings of phone services
1. Tap Start > Settings > Personal tab > Phone > Services tab.
Alarms and notifications
To set an alarm
1. Tap Start > Settings > System tab > Clock & Alarms > Alarms tab.
2. Select the service you want to use, then tap Get Settings.
3. Choose your desired options, then tap OK.
For more information about customizing settings of phone services, see
Help on your device.
2. Tap <Description> and enter a name for the alarm.
3. Tap the day of the week for the alarm. You can select multiple days by
tapping each desired day.
4.2 Personalizing the Today Screen
4. Tap the time to open a clock and set the time for the alarm.
The Today screen shows your upcoming appointments, active tasks, and
information about incoming messages. You can customize what to display
on the Today screen.
5. Tap the alarm icon (
) to specify the type of alarm you want. You
can choose a flashing light, a single sound, a repeating sound, or
vibration.
To customize the Today screen
6. If you choose to play a sound, tap the list next to the Play sound
1. Tap Start > Settings > Personal tab > Today.
check box and tap the sound you want.
2. On the Appearance tab, select the desired theme for the background
To choose how to be notified about events or actions
1. Tap Start > Settings > Personal tab > Sounds & Notifications.
of the Today screen.
3. On the Items tab, select the items you want to appear on the Today
2. On the Sounds tab, choose how you want to be notified by selecting
screen.
the appropriate check boxes.
To use a custom background image
You can use one of your own pictures as the background image on the
Today screen.
3. On the Notifications tab, in Event, tap an event name and choose
how you want to be notified by selecting the appropriate check
boxes. You can choose from several options, such as a special sound, a
message, or a flashing light.
1. Tap Start > Settings > Personal tab > Today.
Tip
Turning off sounds and the flashing light helps conserve battery power.
2. Select the Use this picture as the background check box, and tap
Browse to view a list of your picture files.
3. Tap the file name of the picture you want to use.
4. Tap OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄ6 Setting Up Your Device
To display owner information
Setting Up Your Device ꢄ7
Under Display number of, select the type of tasks you want to
4. Do any of the following:
Having owner information displayed on the Today screen makes it easier for
someone to return your device to you if it is lost.
•
appear on the Today screen.
1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Identification tab, enter your personal information.
•
In the Category list, select whether to display only tasks assigned
to a specific category or to display all tasks.
Tips
•
If you don’t see owner information on the Today screen, tap Start >
Settings > Personal tab > Today. On the Items tab, select the Owner
Info check box.
For more information about creating tasks on your device, see Chapter 6.
Customize the Start menu
•
You can set your device to display the ‘my info’screen when your device
is turned on. This screen shows your complete personal information. To
display the 'my info' screen, tap Start > Settings > Personal tab > Owner
Information > Options tab then select the Identification information
check box.
You can choose which items appear in the Start menu.
1. Tap Start > Settings > Personal tab > Menus.
2. Select the check boxes of the items you want to appear in the Start
menu. You can select up to seven items.
To set options for displaying appointments on the Today screen
If you have a large number of appointments, you may want to specify the
kind of appointments that are displayed on the Today screen.
Tip
You can also create folders and shortcuts to appear on the Programs menu.
Using Windows Explorer on your PC, navigate to the /Windows/Start Menu
folder of your device, then create the folders and shortcuts that you want.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
4.3 Protecting Your Device
3. Select Calendar and tap Options.
Protect your SIM card with a PIN
4. Do any of the following:
You can protect your SIM card from unauthorized use by assigning a PIN
(personal identification number). The default PIN will be given to you by
your wireless service provider.
•
•
Select Next appointment to show only the next appointment
in your schedule, or Upcoming appointments to show multiple
appointments.
Clear the Display all day events check box if you do not want to
display all-day events.
To change the PIN
1. On the Phone screen, tap Menu > Options > Phone tab.
2. Select the Require PIN when phone is used check box.
3. To change the PIN at any time, tap Change PIN.
For more information about using Calendar, see Chapters 6 and ꢄ.
To set options for displaying tasks on the Today screen
If you have a large number of tasks, you may want to specify the kind of
tasks that are displayed on the Today screen.
Tip
Emergency calls can be placed at any time, without requiring a PIN.
Protect your device with a password
You can help keep your data more secure by requiring a password every
time the device is turned on.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Tasks and tap Options.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢄ Setting Up Your Device
To set a device password
1. Tap Start > Settings > Personal tab > Lock.
2. Select the Prompt if device unused for check box, and in the box to
the right, select how long your device must be idle before a password
is required.
3. In the Password type box, select the type of password you would like
to use. If your device is configured to connect to a network, use an
alphanumeric password for increased security for your device.
4. Enter the password in both the Password and Confirm boxes.
5. Tap OK. The next time the device is turned on, you will be prompted
to enter your password.
Notes
•
•
•
•
To ensure you can always make emergency calls, do not begin your
password with the digits of your local emergency number.
If you entered a hint, the hint will be displayed after the wrong password
is entered five times.
Each time a wrong password is entered, the device response time gets
longer until the device appears to be not responding.
If you forget your password, you can hard reset or clear the device
memory. Before you do this, make sure you back up your data and files
so that you can restore them back to your device. For more information
about hard resetting the device and clearing the memory, see Chapter 1ꢀ.
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage
card.
1. Tap Start > Settings > System tab > Encryption.
2. Select Encrypt files placed on storage cards.
Notes
•
Encrypted files can be read only on the device that encrypted them.
•
Encrypted files are opened just like other files, provided you are using the
device that encrypted them. There is no separate step for you to take to
read these files.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Synchronizing Information
With Your Computer
Windows Vista®
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅ0 Synchronizing Information With Your Computer
Synchronizing Information With Your Computer ꢅ1
5.1 About Synchronization
5.2 Setting Up Windows Mobile® Device Center on
Windows Vista®
You can take information from your computer wherever you go by
synchronizing them to your device. The following types of information can
be synchronized between your computer and your device:
Microsoft Windows Mobile® Device Center is the replacement for
Microsoft® ActiveSync® on Windows Vista®.
•
Microsoft Outlook® information, which include Outlook e-mail,
contacts, calendar, tasks, and notes
Note
Some versions of Windows Vista come with Windows Mobile Device Center
already installed. If Windows Mobile Device Center is not available on your
Windows Vista, you can install it from the Getting Started Disc that came with
your device.
•
•
•
Media, such as pictures, music and video
Favorites, which are the bookmarked links to your favorite web sites
Files, such as documents and other files
Set up synchronization in Windows Mobile Device Center
When you connect your device to your PC and start Windows Mobile
Device Center for the first time, you are asked to create a Windows
Mobile partnership with your device. Follow the steps below to create a
partnership.
Before you can synchronize, you need to install and set up first the
synchronization software on your computer. For more information, see
“Setting Up Windows Mobile Device Center on Windows Vista®”and “Setting
Up ActiveSync® on Windows XP®”.
1. Connect your device to your PC. Windows Mobile Device Center
Ways to synchronize
configures itself and then opens.
After you have installed the synchronization software to your computer,
connect and synchronize your device with your computer by using one of
the following methods:
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center’s Home screen, click Set up
your device.
•
Connect and synchronize using the supplied USB sync cable.
Upon connecting the sync cable to your device and your computer,
the synchronization process starts automatically.
•
Connect and synchronize using Bluetooth.
You must first set up a Bluetooth partnership between your device
and your computer before you can synchronize information between
them using Bluetooth. For more information about setting up
a Bluetooth partnership, see Chapter 10. For information about
synchronizing through Bluetooth, see “Synchronizing via Bluetooth”
later in this chapter.
Try to synchronize frequently in order to keep information up-to-date in
both your device and your computer.
Note
You can also synchronize Outlook e-mail, contacts, calendar, and tasks on
your device with the Exchange Server at your work. For more information
about setting up your device to synchronize with the Exchange Server, see
Chapter ꢄ.
Note Choose Connect without setting up your device if you only want to
transfer media files, check for updates, and explore your device but not
sync Outlook information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅꢀ Synchronizing Information With Your Computer
Synchronizing Information With Your Computer ꢅꢁ
4. Select the items you want to synchronize, then click Next.
5. Enter a device name and click Set Up.
5.3 Setting Up ActiveSync® on Windows XP®
The Getting Started Disc that comes with your device contains Microsoft
ActiveSync ꢂ.ꢃ or later. Follow the steps in this section to install and set up
ActiveSync on Windows XP or other compatible Windows systems.
When you finish the setup wizard, Windows Mobile Device Center
synchronizes your device automatically. Notice that Outlook e-mails and
other information will appear on your device after synchronization.
Note
For a list of compatible Windows systems, please go to
http://www.microsoft.com/windowsmobile/activesync/activesyncꢂꢃ.mspx.
Use Windows Mobile Device Center
To open Windows Mobile Device Center, click Start > All Programs >
Windows Mobile Device Center on your Windows Vista computer.
Install ActiveSync
1. Insert the Getting Started Disc into the disc drive on your PC.
2. Click Setup and Installation.
3. Select the ActiveSync check box and click Install.
4. Read the license terms and click Accept.
5. When installation is complete, click Done.
6. On the Getting Started with Windows Mobile screen, click Close.
Set up synchronization in ActiveSync
Follow the steps below to set up a synchronization partnership.
1. Connect your device to your PC. The Synchronization Setup Wizard
automatically starts and guides you to create a synchronization
partnership. Click Next to proceed.
On Windows Mobile Device Center, you can do the following:
2. To synchronize your device with your PC, clear the Synchronize
directly with a server running Microsoft Exchange check box then
click Next.
•
•
Click Mobile Device Settings to change synchronization settings.
When you click Pictures, Music and Video > ___ new pictures/
video clips are available for import, a wizard guides you to tag
and transfer photos from your device to the Photo Gallery on your
Windows Vista PC.
3. Select the information types that you want to synchronize then click
Next.
4. Select or clear the Allow wireless data connections check box
•
Click Pictures, Music and Video > Add media to your device from
Windows Media Player to synchronize music and video files using
Windows Media™ Player. For more information, see “Windows Media®
Player Mobile”in Chapter 11.
according to your preference.
5. Click Finish.
When you finish the wizard, ActiveSync synchronizes your device
automatically. Notice that Outlook e-mails and other information will
appear on your device after synchronization.
•
Click File Management > Browse the contents of your device to
view documents and files from your device.
Note
See Windows Mobile Device Center Help for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅꢂ Synchronizing Information With Your Computer
Synchronizing Information With Your Computer ꢅꢃ
3. To change synchronization settings for an information type, for
instance, E-mail, select it and tap Settings.
5.4 Synchronizing With Your Computer
Connect and synchronize your device with your PC using the USB cable or
Bluetooth connection.
You can then set the download size limit, specify the time period of
information to download, and more.
Start and stop synchronization
You can manually synchronize either from your device or PC.
Notes
•
Some information types such as Favorites, Files and Media cannot be
selected in ActiveSync Options on your device. You can only select or clear
these items from your PC’s Windows Mobile Device Center or ActiveSync.
From your device
•
A PC can have sync partnerships with many different Windows Mobile
powered devices, but a device can have sync partnerships with at most
two PCs only. To ensure that your device will synchronize properly with
both PCs, set up the second PC using the same synchronization settings
you used on the first PC.
•
Tap Start > Programs > ActiveSync., then tap Sync.
To end synchronization before it completes, tap Stop.
Tip
To delete a partnership with one PC completely, disconnect your device
from that PC first. In ActiveSync on your device, tap Menu > Options, tap the
computer name, then tap Delete.
•
Outlook e-mail can be synchronized with only one computer.
From Windows Mobile Device Center
1. Click Start > All Programs > Windows Mobile Device Center.
Troubleshoot sync connection problem
When the PC is connected to the Internet or a local network, in some cases,
the PC may disconnect the connection with your device in favor of the
Internet or network connection.
2. Click
To end synchronization before it completes, click
From ActiveSync on your PC
at the lower left of the Windows Mobile Device Center.
.
If this happens, tap Start > Settings > Connections tab > USB to PC, then
clear the Enable advanced network functionality check box. This makes
your PC utilize a serial USB connection with your device.
When you connect your device to your PC, ActiveSync automatically opens
on your PC and synchronizes.
The USB to PC (
) icon appears on the Today Screen when serial USB
•
•
To manually start synchronization, click
.
connection is used.
To end synchronization before it completes, click
.
5.5 Synchronizing via Bluetooth
Change which information is synchronized
You can change the information types and the amount of information to
synchronize for each type either on your device or your PC. Follow the steps
below to change synchronization settings on your device.
You can connect and synchronize your device with the PC using Bluetooth.
To synchronize with a computer via Bluetooth
1. Set up Windows Mobile Device Center or ActiveSync on your PC
to synchronize through Bluetooth. See the program’s Help for
instructions.
Note
Before changing synchronization settings on your device, disconnect it from
your PC.
1. In ActiveSync on your device, tap Menu > Options.
2. On your device, tap Start > Programs > ActiveSync.
2. Select the check box for any items you want to synchronize. If you
cannot select a check box, you might have to clear the check box for
the same information type elsewhere in the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅ6 Synchronizing Information With Your Computer
3. Make sure that Bluetooth on both your device and the computer
are turned on and set to visible mode. For more information, see
“Bluetooth”in Chapter 10.
4. Tap Menu > Connect via Bluetooth. Make sure the Bluetooth
function of both your device and the computer are turned on and set
to visible mode.
5. If this is the first time you have connected to this computer via
Bluetooth, you must first complete the Bluetooth wizard on your
device and set up a Bluetooth partnership between your device
and the computer. For more information about creating a Bluetooth
partnership, see “Bluetooth partnerships”in Chapter 10.
Notes
•
•
To preserve battery power, turn off Bluetooth when not in use.
To connect and synchronize your device with a computer via Bluetooth,
your computer must have built-in Bluetooth or installed with a Bluetooth
adapter or dongle.
5.6 Synchronizing Music and Video
If you want to carry your music or other digital media along with you while
you travel, set up Microsoft® Windows Media® Player on your computer to
synchronize music and video with your device.
Other than selecting the Media information type to be synchronized, all
media synchronization settings must be set in Windows Media Player.
Before media can be synchronized, you must do the following:
•
Install Windows Media Player Version 11 on the PC. (Windows Media
Player 11 works only in Windows XP or later versions).
•
Connect your device to the PC with a USB cable. If your device is
currently connected using Bluetooth, you must end that connection
before media can be synchronized.
•
Set up a sync partnership between your device and your PC’s
Windows Media® Player.
For more information about using Windows Media® Player Mobile, see
Chapter 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Organizing Contacts,
Appointments, Tasks, and
Other Information
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅꢄ Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information ꢅꢅ
4. To add a photo of the contact, tap Select a picture, then select
the picture file or tap Camera to take a photo of the contact. This
photo appears on the Phone screen when you receive a call from the
contact.
6.1 Contacts
Contacts is your address book and information storage for the people and
businesses you communicate with. You can create the following types of
contacts on your device:
5. To assign a ring tone to the contact, tap the Ring tone field, scroll
•
•
•
Outlook contacts. Contacts that are
stored on your device, which can be
created on your device or synchronized
with your PC or the Exchange Server.
through the list of tones, then select a desired tone.
6. When finished, tap OK.
Tips
•
If someone who is not in your list of contacts calls you, create a contact
from Call History by tapping and holding a phone number and then
tapping Save to Contacts from the shortcut menu.
SIM contacts. Contacts that are stored
on the SIM card. Only the name and a
phone number can be stored for each
entry.
•
•
To save a phone number that is contained in a message, tap the phone
number, then tap Menu > Save to Contacts.
To edit contact information, tap the contact name then tap Menu > Edit.
Windows Live contacts. Contacts that
you communicate with using Windows
Live Messenger or MSN. Just like Outlook
contacts, you can also enter complete
information for a Windows Live contact.
For more information, see “Add Windows
Live contacts”in Chapter 10.
To add a contact to your SIM card
1. Tap Start > Contacts.
2. Tap New then select SIM Contact.
3. Enter a contact name and phone number.
4. Tap OK.
Tip
You can also use the SIM Manager to add and edit contacts on your SIM card.
For more information, see "SIM Manager" later in this chapter.
Note You can only add Windows Live contacts after you have set up Windows
Live on your device.
Add new contacts
To add a contact on your device
1. Tap Start > Contacts.
View, organize and search
To view contact information
1. Tap Start > Contacts.
2. Tap New, select Outlook
Contact, and enter the contact
information.
2. Slide your finger upward on the touch screen to scroll down the
contact list.
To scroll up the contact list, slide your finger downward on the touch
screen.
3. In the File as field, choose how
you want the contact name to
appear in the contact list.
Note For detailed instructions on how to use finger scrolling, see "Finger
scrolling and finger panning" in Chapter 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
100 Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 101
•
•
Begin entering a contact name in the provided text box until the
contact you want is displayed.
Filter the list by categories. In the contact list, tap Menu > Filter,
then tap a category you’ve assigned to a contact. To show all
contacts again, select All Contacts.
3. Touch the name of a contact to
open his or her contact card.
4. On the contact card, you will see
the last outgoing or incoming call
as well as detailed information such
as phone numbers of the contact,
e-mail address, and more.
Share contact information
To beam a contact’s details
You can quickly send contact information to another mobile phone or
device through Bluetooth beaming.
1. Tap Start > Contacts, then select a contact.
2. Tap Menu > Send Contact > Beam then select a device where to
To group similar contacts
You can group similar contacts for easier management by assigning them
to categories.
beam the contact to.
Note
Before you can beam, make sure Bluetooth is turned on and set to visible
mode on your device and the target mobile device. You can also beam
contact information to your PC. See "Bluetooth" in Chapter 10 for details.
1. Create a new Outlook contact or edit an existing Outlook contact.
2. Tap Categories.
To send contact information via text messaging
1. Tap Start > Contacts, then select a contact.
3. Select a preset category such as Business or Personal, or tap New to
create your own category.
2. Tap Menu > Send Contact > SMS \ MMS.
4. When finished, tap OK.
3. Select the contact information you want to send, then tap Done.
To view contacts by category
4. In the new text message, enter the mobile phone number of the
recipient, then tap Send.
•
Tap Menu > Filter then select the desired category.
To find a contact on your device
There are several ways to find a contact when your contact list is long.
To send contact information as a vCard
A vCard (virtual business card) is a standard file format used for exchanging
contact information. vCard files can be exported to Outlook on the PC. From
your device, you can send a vCard containing contact information as a file
attachment in an MMS message.
1. Tap Start > Contacts.
2. Do one of the following:
•
On the Quick Scroll bar on the right of the screen (black vertical
bar), scroll to or touch a letter to go directly to the part of the
Contacts list where contact names start with that letter.
1. Tap Start > Contacts, then select a contact.
2. Tap Menu > Send as vCard.
Note You can disable the Quick Scroll bar by tapping Menu > Options and
selecting the Show alphabetical index check box. This will show the
alphabetical index on top of the Contacts list.
3. A new MMS message is created with the vcard file attached. Enter
the mobile phone number or e-mail address of the recipient then tap
Send.
Download from Www.Somanuals.com. All Manuals Search And Download.
10ꢀ Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 10ꢁ
3. Under the Mark column, you can
change the indicator that will be
6.2 SIM Manager
SIM Manager allows you to view the contents of your SIM card, transfer
contacts from your SIM card to your device or vice versa, and make a call to
a SIM contact.
appended to the SIM contact names
for each phone number type. To do
so, select a phone type, tap Edit, enter
your desired indicator, then tap Save.
To create a contact on your SIM card
1. Tap Start > Programs > SIM Manager.
4. After modifying, tap OK.
5. Tap Menu > Contacts to SIM.
2. Tap New and enter a contact name and phone number.
3. Tap Save to save the information on your SIM card.
6. Select the check boxes of the contact’s
phone numbers that you want to
Tip:
To change contact information on your SIM card, tap a SIM contact and edit
it. After modifying, tap Save.
copy to your SIM card, then tap Save.
When your phone number is stored on
the SIM card, it will appear on the SIM
Manager screen.
To copy SIM contacts to your device
If you have saved contacts on your SIM card, you can copy them into
Contacts on your device.
To store your SIM card’s phone
number
1. On the SIM Manager screen, tap
Menu > Tools > List of Own
Numbers.
1. Tap Start > Programs > SIM Manager.
2. Select the desired item, or select all SIM contacts by tapping Menu >
Select All.
2. Tap [Voice Line 1].
3. Tap Menu > Save to Contacts.
3. Change the name, if desired,
then enter your mobile phone
number.
To copy contacts to the SIM card
Only one phone number per contact name can be stored on a SIM card.
When you copy a contact that has several phone numbers to your SIM card,
SIM Manager saves each number under a separate name.
4. Tap Save.
To save each number under a different contact name on the SIM card, SIM
Manager appends an indicator at the end of each name. By default, /M, /W
and /H are appended to indicate mobile, work and home phone numbers
respectively. You can edit this indicator first before you start copying
contacts to your SIM card. Indicators of the other types of phone numbers
are left empty for you to define them.
1. Tap Start > Programs > SIM Manager, then tap Menu > Tools >
Options.
2. Select the check boxes of the types of phone numbers that you want
to be added to the SIM card.
Download from Www.Somanuals.com. All Manuals Search And Download.
10ꢂ Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 10ꢃ
4. Set the time when you want the reminder to alert you.
5. Tap OK to return to the calendar.
6.3 Calendar
Use Calendar to create appointments, including meetings and other
events. You can also synchronize Calendar appointments between your
device and PC.
View appointments
By default, Calendar displays appointments in Agenda view. You can also
look at your appointments in Day, Week, Month, and Year views.
Create appointments
To schedule an appointment
1. Tap Start > Calendar.
The highlighted hours
here indicate the time of
Indicates
that there
is a conflict
with another
appointment.
your appointments.
2. Tap Menu > New Appointment.
3. Enter a name for the appointment.
4. Do one of the following:
Tap to view appointment
details.
•
If it is a special occasion such as a birthday or a whole-day event,
set the All Day option to Yes.
•
If there is a time frame for the appointment, select the start and
end dates and time.
Tap to switch views.
5. Specify the type of category for your appointment, so that it can be
grouped with other related appointments. Tap Categories, then
select a preset category (Business, Holiday, Personal, or Seasonal), or
tap New to create your own category.
Agenda view
•
•
•
To see detailed appointment information in any view, tap the
appointment.
6. When finished, tap OK to return to the calendar.
To view appointments by category, tap Menu > Filter then select the
desired category.
Notes
•
All-day events do not occupy blocks of time in Calendar; instead, they
appear in banners at the top of the calendar.
To change the default view that Calendar uses to display
appointments, tap Menu > Tools > Options > General tab. Tap the
Start in box then choose the calendar view.
•
To cancel an appointment, tap Menu > Delete Appointment.
Tip
To have the time entered automatically in Day view, tap the time slot for the
new appointment, and tap Menu > New Appointment.
•
When in Month view, you will see the following indicators:
Morning appointment
To set a default reminder for all new appointments
You can have a reminder automatically turned on for all new appointments
you schedule.
Afternoon or evening appointment
Both morning and afternoon/evening appointments
All-day event
1. Tap Start > Calendar.
2. Tap Menu > Tools > Options > Appointments tab.
3. Select the Set reminders for new items check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
106 Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 107
Send appointments
To send a meeting request
6.4 Tasks
Use Tasks to keep track of things you need to do. A task can occur once or
repeatedly (recurring). You can set reminders for your tasks and you can
organize them using categories.
Use Calendar to schedule meetings via e-mail with contacts who use
Outlook or Outlook Mobile.
1. Tap Start > Calendar.
Your tasks are displayed in a task list. Overdue tasks are displayed in red.
2. Schedule a new appointment, or open an existing one and
tap Menu > Edit.
To create a task
1. Tap Start > Programs > Tasks.
3. Tap Attendees, then tap Add Required Attendee or Add Optional
Attendee and add the contacts whom you want to invite.
2. Tap Menu > New Task, enter a subject for the task, and fill in
information such as start and due dates, priority, and so on.
Note You can specify if an attendee is required or optional only if your
device is connected to a Microsoft Exchange ꢀ007 server. Otherwise,
all attendees are designated as required. For more information, see
Chapter ꢄ.
3. Specify the type of category for your task, so that it can be grouped
with other related tasks. Tap Categories, then select a preset category
(Business, Holiday, Personal, or Seasonal), or tap New to create your
own category.
4. When you have finished adding attendees, tap Done.
5. Tap OK to send.
4. When finished, tap OK.
Tip
You can easily create a short, to-do type task. Simply tap the Tap here to add
a new task box, enter a subject, and tap the Enter button on the onscreen
keyboard. If the task entry box is not available, tap Menu > Options and
Tip
To choose the e-mail account to use for sending meeting requests, tap
Menu > Tools > Options > Appointments tab. Tap the Send meeting
requests via box and choose to send via your Outlook E-mail, POPꢁ/IMAPꢂ
or Windows Live account.
select the Show Tasks entry bar check box.
Notes
•
If you’re sending the meeting request using your Outlook E-mail account,
it will be sent to the attendees the next time you synchronize your device
with your PC or Exchange Server.
To change the priority of a task
Before you can sort tasks by priority, you need to specify a priority level for
each task.
•
When attendees accept your meeting request, the meeting is
automatically added to their schedules. When their response is sent back
to you, your calendar is updated as well.
1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and in the Priority box, tap a priority level.
4. Tap OK to return to the task list.
To send appointment details as a vCalendar
A vCalendar is a standard file format used for exchanging scheduling and
task information. vCalendar files can be exported to Outlook on the PC.
Note
All new tasks are assigned a Normal priority by default.
Tap Menu > Send as vCalendar to send a vCalendar containing
appointment details as a file attachment in an MMS message. For more
information, see “MMS”in Chapter 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
10ꢄ Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 10ꢅ
To set the default reminder for all new tasks
1. Tap Start > Programs > Tasks.
6.5 Notes
Using Notes, you can create handwritten and typed notes, record voice
notes, convert handwritten notes to text for easy readability, and more.
2. Tap Menu > Options.
3. Select the Set reminders for new items check box.
4. Tap OK to return to the task list.
To create a note
1. Tap Start > Programs > Notes. In the note list, tap New.
Note
The new tasks must have due dates set in order for the reminder to take
effect.
2. Tap the Input Selector arrow next to the Input Method icon on the
menu bar, tap the input method you want, and enter your text.
To show start and due dates in the task list
1. Tap Start > Programs > Tasks.
3. If the Input Selector arrow is not displayed, tap the Input Method
icon.
2. Tap Menu > Options.
4. When finished, tap OK to return to the note list.
3. Select the Show start and due dates check box.
4. Tap OK.
Notes
•
To select handwritten text, tap and hold next to the writing. As soon as
dots appear, and before they form a complete circle, quickly drag across
the writing.
To locate a task
•
If a letter crosses three ruled lines, it is treated as a drawing rather than
text.
When your list of tasks is long, you can display a subset of the tasks or sort
the list to quickly find a specific task.
To draw in a note
1. Tap Start > Programs > Notes.
1. Tap Start > Programs > Tasks.
2. In the task list, do one of the following:
2. In the note list, tap New.
•
•
Sort the list. Tap Menu > Sort By, and tap a sort option.
Filter the list by category. Tap Menu > Filter, and tap the category
you want displayed.
3. To draw on the screen, use the stylus
like a pen.
4. A selection box appears around your
Tip
To filter your tasks further, tap Menu > Filter > Active Tasks or Completed
Tasks.
drawing.
5. When finished, tap OK to return to the
note list.
To send task information as a vCalendar
Tap Menu > Send as vCalendar to send a vCalendar containing task details
as a file attachment in an MMS message. For more information, see “MMS”
in Chapter 7.
Note
To select a drawing (for example, to copy
or delete it), tap and hold the drawing
briefly. When you lift the stylus, the
drawing is selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
110 Organizing Contacts, Appointments, Tasks, and Other Information
Organizing Contacts, Appointments, Tasks, and Other Information 111
To record a voice note
You can create a stand-alone recording (voice note) or you can add a
recording to a note.
6.6 Voice Recorder
Voice Recorder lets you record your voice and then quickly send it in an
MMS or e-mail, beam it, or set the recorded voice as your ring tone.
1. Tap Start > Programs > Notes.
Note
Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate
Narrowband) format only. This is a common speech audio format used in
mobile devices.
2. If you do not see the Recording toolbar, tap Menu > View Recording
Toolbar.
3. Do one of the following:
To record your voice
1. Tap Start > Programs > Voice Recorder.
•
•
To create a stand-alone recording, record from the note list.
To add a recording to a note, create or open a note.
2. Hold the device’s microphone near your mouth.
4. Tap the Record icon (
) to begin recording your voice. Tap the
3. Tap Record or
to start recording a voice clip. Tap Stop or
end the recording.
to
Stop icon (
) when finished recording.
To change recording formats
1. Tap Start > Settings > Personal tab > Input.
All recordings are saved in the My Voices folder by default. You can choose
another folder to save voice recordings by tapping beside the folder name
on the top-left of the screen and then in the menu, choose the folder where
to save future recordings.
2. Tap the Options tab, and select the desired format you want in the
Voice recording format list.
3. Tap OK.
To play back a voice recording
On the Voice Recorder screen, select a voice recording then tap
.
Note
You can also change recording formats from within Notes. In the note list, tap
Menu > Options > Global Input Options link (at the bottom of the page),
then tap the Options tab.
Tips
•
•
Tap
Tap
to increase the volume; tap
to decrease the volume.
to toggle between muting and unmuting the volume.
To send the voice recording through MMS
Select a voice recording then tap Menu > Send via MMS. A new MMS
message is then created with the voice recording automatically inserted as
an audio clip.
See “MMS”in Chapter 7 to learn how to compose and send MMS messages.
To send the voice recording via e-mail
Select a voice recording then tap Menu > Send > Outlook E-mail. This
creates a new Outlook e-mail message with the voice recording inserted as
a file attachment.
See “Using E-mail”in Chapter 7 to learn how to send e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
11ꢀ Organizing Contacts, Appointments, Tasks, and Other Information
To beam the voice recording
1. Select the voice recording(s) you want to beam then tap Menu >
Beam File.
Tip
To select multiple files, tap and drag over the desired files or
tap Menu > Select All.
2. Tap the device you want to send the voice recording(s) to.
3. On the other device, accept the file transfer to receive the file.
To set the voice recording as a ring tone
Select the desired voice recording then tap Menu > Set as Ringtone.
To rename or move a recording
1. Select the voice recording(s), then tap Menu > Rename/Move.
2. Enter the new Name for the voice recording.
3. To move the voice recording, select the new destination Folder and
Location.
4. Tap OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Exchanging Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
11ꢂ Exchanging Messages
Exchanging Messages 11ꢃ
To automatically add a signature in outgoing messages
You can automatically add your name and other information as your
signature in outgoing SMS, MMS and e-mail messages by following these
steps:
7.1 Messaging
Messaging is where your text messages (SMS), multimedia messages
(MMS), and e-mails are located. When you receive new messages, you can
open them from the Today screen. Simply tap the type of message that you
want to open.
Tip
You need to specify your signature for each type of messaging account.
1. Tap Start > Messaging, then tap Menu > Options.
2. Tap Signatures.
3. Select a type of messaging account in which to add a signature.
4. Select the Use signature with this account check box.
New e-mail messages
New SMS and MMS
messages
5. In the provided text box, enter the information that will be displayed
as your signature.
6. If you want the signature to be added whenever you reply or forward
messages, select the Use when replying and forwarding check box.
7. Repeat steps ꢁ to 6 to add a signature to the other types of messaging
accounts.
To select a messaging account
Do one of the following:
7.2 Text Messages
Send short text messages (SMS) up to 160 characters long to other mobile
phones.
•
Tap Start > Messaging. The
Account Picker screen then appears
where you can select an account.
Send text messages
To compose and send a text message
1. Tap Start > Contacts.
•
While you are in a message list of a
certain account, for example SMS \
MMS, tap Menu > Go To to switch to
other types of messaging accounts.
2. Slide your finger upward on the touch screen to scroll down the
contact list. See “Finger scrolling and finger panning”in Chapter 1 for
more details on finger scrolling.
To configure message account settings
•
Tap Menu > Options on the
Account Picker screen.
3. Touch the contact’s name to open his or her contact card.
Account Picker screen
4. On the contact card, touch the item that shows Send text message.
•
Tap Menu > Tools > Options while
you’re in a message list.
Download from Www.Somanuals.com. All Manuals Search And Download.
116 Exchanging Messages
5. A new text message is then created.
Exchanging Messages 117
7.3 MMS
To add more recipients, enter their mobile
phone numbers in the To field, separating
them with a semicolon. You can also
tap To if you want to add mobile phone
numbers from Contacts.
Sending multimedia messages (MMS) to your friends and family is fun
and easy. You can include pictures, videos, or audio clips in a multimedia
message.
Notes
•
Please note that multimedia messaging is a charged service and has to be
provisioned on your mobile account. Please contact your wireless service
provider to have MMS provisioned as part of your calling plan.
6. Enter your message.
•
To quickly add common messages,
tap Menu > My Text and tap a desired
message.
•
Please make sure the size of MMS messages that you send is within the
limits allowed by your wireless service provider.
Change MMS settings
•
To check the spelling, tap Menu >
Spell Check.
Check your device to see if it is configured with your wireless service
provider’s MMS settings. If the MMS settings are not yet configured on your
device, you can add the settings while composing an MMS message.
7. Tap Send.
Tips
•
To enter symbols, tap 123 using the onscreen keyboard and then tap
a symbol. For more information about entering text and symbols, see
Chapter ꢀ.
To configure MMS message settings
1. Tap Start > Messaging > SMS \ MMS.
•
If you want to know when a text message is received, before sending the
message that you are composing, tap Menu > Message Options then
select the Request message delivery notification check box.
2. Tap Menu > MMS Options. The Settings screen then appears.
3. In the Preferences tab, select or clear the provided check boxes
according to your needs.
To always receive a delivery notification, tap Menu > Tools > Options in
the text message list, tap SMS \ MMS, then select the Request delivery
notifications check box.
4. Tap the Servers tab and
check if your device is
preset with MMS server
settings.
Copy text messages from and to the SIM card
1. Tap Start > Messaging > SMS \ MMS.
If there are no preset
settings, tap New and
enter the following
information, which you
can get from your other
wireless service provider:
2. In the message list, select the text message you want to copy.
3. Do one of the following:
•
•
To copy a text message to the SIM card, tap Menu > Copy to SIM.
To copy a text message from the SIM card to your device, tap
Menu > Copy to Phone.
Note
Text messages stored on your SIM card are automatically displayed in the
Inbox folder. Copying them to your device results in duplicate messages in
the Inbox folder when your SIM card is in use.
•
Gateway. Location of the MMS server, which is usually in the form
of an IP address.
Download from Www.Somanuals.com. All Manuals Search And Download.
11ꢄ Exchanging Messages
Exchanging Messages 11ꢅ
•
•
•
•
•
Port number. HTTP port number used for connecting to the MMS
server and for file transfer.
5. Tap the Insert icon (
) to select and insert a photo or video clip.
When selecting a photo or video clip, you can:
Server address. URL address of the server where MMS messages
are stored.
•
•
Tap Select to insert the selected photo or video clip into the MMS
message you are composing.
Connect via. Select the connection that your device uses for MMS
messages.
Tap
Tap
to take a photo and insert it into the MMS message.
•
•
to record MMS video and insert it into the MMS message.
Send limit. Select the maximum MMS message size allowed by
your wireless service provider.
Tap Exit (
) to quit selection and return to the MMS message.
WAP version. Select either WAP 1.2 or WAP 2.0, depending on
which one is being used by your other wireless service provider.
6. Enter text and insert audio clips by tapping the respective areas. See
“To add text to an MMS message”and “To add an audio clip to an
MMS message”for details.
5. Tap Done.
7. To add more slides, tap or tap Menu > Slides > Insert Slide. Repeat
Notes
•
If your device already has preset MMS settings, it is recommended that
you do not change these settings. If you change the preset settings, your
device may not be able to send and receive MMS messages.
steps ꢃ and 6 to insert photos/videos, text, and audio onto your slides.
8. Tap Send to send the MMS message.
•
If you add several MMS message service providers to the Settings screen,
you can choose one as your default provider. Select the provider's name
in the list then tap Set As Default.
Tip
You can also send an MMS message from the Pictures & Videos, Camera
program, or Camera Album.
To add text to an MMS message
When you tap Insert text here on your MMS message, an empty screen
appears where you can enter your text. You can insert the following types of
information:
Create and send MMS messages
You can compose MMS messages in a combination of slides, where each
slide can consist of a photo, video or audio clip, and/or text.
To compose an MMS message
1. Tap Start > Messaging > SMS \ MMS, then tap Menu > New > MMS.
Enter your own text
2. When you see the Choose a MMS screen, tap a preset template, or tap
Custom to open a blank MMS message.
Choose from common words
or phrases from the My Text list
Insert contact
information
Note If you prefer to always create a blank MMS message, select the Always
choose custom check box.
Include a Favorites link
Add an emoticon
Insert calendar
appointment
3. In To, enter the recipient’s phone number or e-mail address directly,
or tap To, Cc, or Bcc to choose a phone number or an e-mail address
from Contacts.
Note Scroll up to see the Cc and Bcc fields.
4. Enter a subject for your message.
Tip
To edit or delete a phrase on the My Text list, tap and hold a string, then tap
Edit or Delete from the shortcut menu. To add a new phrase, tap New.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀ0 Exchanging Messages
To add an audio clip to an MMS message
Exchanging Messages 1ꢀ1
To block a phone number from sending you MMS messages
If you do not want to receive MMS messages from a particular sender, you
can add the sender’s phone number to the MMS Blacklist.
You can add one audio clip per slide in your MMS message.
1. Tap Insert audio.
1. When you receive a new MMS message, open and view the message.
By default, My Documents will be shown. Tap My Music or another
folder that contains audio files. When navigating folders, tap the
Down arrow ( ) to return to the upper folder.
2. To avoid receiving MMS messages from this sender next time, tap
Menu > Show > Message Detail.
2. Select an audio file. When selected, you can:
3. On the MMS Detail screen, tap Menu > Show Contact Details.
4. Tap Menu > Save to Blacklist.
•
•
•
•
Tap
Tap Select to insert it into your MMS message.
Tap Exit ( ) to quit selection and return to your MMS message.
to play the audio clip,
to pause, or
to stop playback.
5. Tap Done.
Tips
•
To view the Blacklist tab, on the SMS \ MMS screen, tap Menu > MMS
Options > Blacklist tab.
To record a new audio clip and add it to your MMS message, tap
. The Record pop-up window then opens. Tap Record to start
recording, and Stop to end the recording. Tap Play to listen to
the recorded audio clip, then tap Add. The new audio clip is then
inserted into your MMS message.
•
To unblock a phone number and allow the sender to send you MMS
messages, remove the number from the Blacklist. Tap and hold the phone
number in the Blacklist then tap Delete.
7.4 Types of E-mail Accounts
View and reply to MMS messages
To view an MMS message
You can set up the following types of e-mail accounts on your device:
•
•
•
•
Outlook e-mail that you sync with your PC or the Exchange Server.
E-mail account that you have from an Internet Service Provider (ISP).
Web-based e-mail accounts such as Yahoo!® Mail, AOL®, etc.
Work account that you access using a VPN connection.
•
•
Use the playback controls
,
, and
.
Tap Contents to see a list of files included in the message. On the
Message Contents screen, you can do the following:
•
•
To save a file, select it, and tap Menu > Save.
To save the contents of a text file to the My Text list, tap Menu >
Save into My Text.
•
To associate a photo to one of your contacts, tap Menu > Assign
to Contact.
To reply to an MMS message
On the message list, select an MMS message and do one of the following:
•
•
Tap Menu > Reply to reply to the sender of the message.
Tap Menu > Reply All to reply to all persons listed in To, Cc, and Bcc
of the message.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀꢀ Exchanging Messages
Exchanging Messages 1ꢀꢁ
Note If Auto Setup is unsuccessful, select Internet e-mail from the Your
7.5 E-mail Setup Wizard
e-mail provider list on the next screen. You will also be asked to enter
e-mail server settings during the setup process. See “To specify e-mail
server settings”for details.
Windows Mobile’s E-mail Setup Wizard lets you easily set up your
personal and work e-mail accounts. You can add an e-mail account from an
Internet Service Provider (ISP) or other e-mail provider as well as web-based
accounts such as Gmail®, Yahoo!® Mail Plus, AOL®, etc.
4. Enter your name. You can also edit the Account display name field to
specify the name of your ISP or e-mail provider. Tap Next.
Note
For more information about setting up your company Outlook e-mail
account, see Chapter ꢄ.
5. Enter your login name if it does not show automatically in the User
name field. Also enter your password, and select the Save password
check box. Tap Next.
Set up your device to synchronize Outlook e-mail with
6. At this point, e-mail setup is complete. In the Automatic Send/
Receive list, choose how frequent you want e-mail messages to be
automatically sent and downloaded on your device.
the computer
If you have installed the synchronization software on your PC and created a
partnership with your device, then your device is ready to send and receive
Outlook e-mail.
Note Tap Review all download settings to select download options, set the
e-mail format as HTML or plain text, and more. For more information,
see “To customize download and format settings."
If you have not yet installed the synchronization software nor created a
partnership, please do so by following the procedures in Chapter ꢃ.
7. Tap Finish.
Tip
To set up your company e-mail account so that you can access Outlook
e-mail messages wirelessly, you must set up your device to synchronize via
an over-the-air connection with your company’s Exchange Server. For more
information about synchronizing with your company e-mail server, see
Chapter ꢄ.
To specify e-mail server settings
If Auto Setup is unsuccessful, contact your ISP or e-mail provider for the
Incoming mail server and outgoing mail server settings so you can enter
them on your device.
Other options that you can select include the following:
Set up a POP3 or IMAP4 e-mail account
•
Select the Outgoing server requires authentication check box, if
required by your provider.
Set up a POPꢁ or IMAPꢂ e-mail account on your device if you have an e-mail
account from an Internet service provider (ISP) or other e-mail provider, or a
web-based account such as Gmail, Yahoo! Mail Plus, etc. You can also add a
work account that you access using a VPN server connection as a POPꢁ/
IMAPꢂ account.
•
If the outgoing e-mail server requires a different user name and
password for sending e-mail, clear the Use the same user name and
password for sending e-mail check box. You will be prompted to
enter this information.
1. Tap Start > Messaging > New E-mail Account.
•
Tap Advanced Server Settings, then select the Require SSL check
boxes if your e-mail provider uses an SSL connection for more secured
e-mail. From the Network connection list, select the data connection
that you use for connecting to the Internet.
2. Enter your e-mail address, and select the Try to get e-mail settings
automatically from the Internet check box. By selecting the option,
the device attempts to download e-mail server settings so that you
do not need to enter them manually. Tap Next.
3. After Auto Setup finishes, tap Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀꢂ Exchanging Messages
To customize download and format settings
Exchanging Messages 1ꢀꢃ
7.6 Using E-mail
Before you tap Finish when setting up your POPꢁ or IMAPꢂ e-mail account,
you can tap Review all download settings to choose download options,
message format, and other settings.
After setting up e-mail accounts on your device, you can start sending and
receiving e-mail messages.
Options
Automatic Send/Receive
Description
Create and send messages
To compose and send a message
1. Tap Start > Contacts.
You can select a time interval for connecting to
the Internet automatically to send and receive
messages.
2. Slide your finger upward on the touch screen to scroll down the
contact list. See “Finger scrolling and finger panning”in Chapter 1 for
more details on finger scrolling.
Download messages
Set the number of days of messages that you
want to be downloaded to your device.
Send/receive when I click
Send
By default, messages are immediately delivered
when you tap Send. If you prefer to save
outgoing messages to the Outbox folder first,
clear the check box. (In this case, you will need
to manually send messages by tapping Menu >
Send/Receive).
This allows your device to data roam when
there is a set time interval for connecting to the
Internet automatically. Since this may result in
higher connection costs, you may want to leave
the check box cleared.
3. Touch the contact’s name to open his or her contact card.
4. On the contact card, touch the item that shows Send e-mail.
5. If you have several e-mail accounts, the Account Picker screen will
appear. Select an e-mail account that you want to use.
Use automatic send/
receive schedule when
roaming
6. A new e-mail message is then created.
To add more recipients, enter their e-mail addresses, separating
them with a semicolon. You can also tap To if you want to add e-mail
addresses stored in Contacts.
When deleting messages
Choose whether to delete messages from the
mail server when you delete them on your device.
Select HTML or Plain Text.
7. Enter a subject and compose your message. To quickly add common
messages, tap Menu > My Text and tap a desired message.
Message format
Message download limit
Select the e-mail download size. If you have large
volumes of e-mail, use a lower size or select to
download headers only.
8. To check the spelling, tap Menu > Spell Check.
9. Tap Send.
Tips
•
To set the priority, tap Menu > Message Options.
•
If you are working offline, e-mail messages are moved to the Outbox
folder and will be sent the next time you connect.
To add an attachment to a message
1. In the message that you are composing, tap Menu > Insert and tap
the item you want to attach: Picture, Voice Note, or File.
2. Select the file you want to attach, or record a voice note.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀ6 Exchanging Messages
To automatically add a signature in outgoing messages
Exchanging Messages 1ꢀ7
You can automatically add your name and other information as your
signature in outgoing SMS, MMS and e-mail messages by following these
steps:
For example, tapping “S”, then “A”
narrows the list to only the e-mails
that contain sender names and
e-mail subjects that start with “SA.”
Tip
You need to specify your signature for each type of messaging accounts.
1. Tap Start > Messaging, then tap Menu > Options.
2. Tap Signatures.
3. Select a type of messaging account in which to add a signature.
4. Select the Use signature with this account check box.
Note If you want the signature to be added whenever you reply or forward
messages, select the Use when replying and forwarding check box.
5. In the provided text box, enter the information that will be displayed
View and reply to messages
To read an incoming message
By default, only the first few kilobytes of a message are shown when you
open an incoming message. To read the whole message:
as your signature.
6. Repeat steps ꢁ to ꢃ to add a signature to the other types of messaging
accounts.
•
Finger-scroll to the end of the message and tap Get the rest of this
message.
Filter the Inbox message list
When the Inbox on your device is full of messages, it may be hard to browse
and locate a desired message. You can filter your Inbox to only display the
messages that contain a particular sender or subject you are searching for.
•
Tap Menu > Download Message.
The message will be downloaded the next time you tap Menu > Send/
Receive to send and receive e-mail.
Note
To filter your Inbox
If your company is running Microsoft Exchange Server ꢀ007, the message
downloads immediately, without waiting until the next time you
synchronize. For more information about working with company e-mails, see
Chapter ꢄ.
Enter the sender name or e-mail subject you want to look for using the
onscreen keyboard. As you tap keys, the message list narrows down to the
conditions you have set.
To download an attachment
An attachment appears below the subject of the message. Tapping the
attachment opens the attachment if it has been fully downloaded or marks
it for download the next time you send and receive e-mail.
Notes
•
If there are multiple attachments in the message, all attachments are
downloaded.
•
For information about setting your device to automatically download file
attachments, see "Customize e-mail settings".
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀꢄ Exchanging Messages
Exchanging Messages 1ꢀꢅ
•
If your company is running Microsoft Exchange Server ꢀ007, the
Download messages
attachment downloads immediately, without waiting until the next time
you synchronize. For more information about working with company
e-mails, see Chapter ꢄ.
The manner in which you download messages depends on the type of
e-mail account you have.
To send and receive e-mail for an Outlook account
1. Connect your device to your PC using the USB cable or Bluetooth.
To reply to or forward a message
1. Open the message and tap Menu > Reply, Menu > Reply All, or
Menu > Forward.
Otherwise, connect wirelessly if you are synchronizing Outlook
e-mail with the Exchange Server. For more information, see Chapter ꢄ.
2. Enter your response then tap Send.
2. Synchronization automatically begins, and your device sends and
Tip
Whenever you reply to all the recipients of an Outlook e-mail, your own
e-mail address will also be added to the recipient list. You can customize
ActiveSync so that your e-mail address will be excluded. To do so, tap
Menu > Options in ActiveSync, select the E-mail item, tap Settings, then
tap Advanced. In the My e-mail addresses text box, enter your e-mail
address(es). If you want to enter more than one e-mail address, separate the
e-mail addresses with a semi-colon.
receives Outlook e-mail.
Tip
You can also manually synchronize anytime by tapping Sync in ActiveSync or
Menu > Send/Receive in Outlook Mobile.
To send and receive e-mail for a POP3/IMAP4 account
If you have an e-mail account with an ISP or a work account that you access
using a VPN server connection, you send and receive messages through a
remote e-mail server. Before sending and downloading messages, you need
to connect to the Internet or your corporate network.
To view and reply to HTML e-mails
You can receive, view and reply to HTML e-mails from any type of e-mail
account. The HTML format is retained, without layout shifting or resizing.
1. Tap Start > Messaging and tap your POPꢁ or IMAPꢂ e-mail account.
Note
HTML e-mail support in Outlook Mobile is available only if your company is
using Microsoft Exchange Server ꢀ007.
2. Tap Menu > Send/Receive. Messages on your device and e-mail
server are synchronized: new messages are downloaded to the device
Inbox folder, messages in the Outbox folder are sent, and messages
deleted from the server are removed from the device Inbox.
1. Set the message format to HTML. To find out how to set the message
format, see “Customize e-mail settings”.
2. Tap Start > Messaging, select your e-mail account, and open an
HTML e-mail that you received.
Customize e-mail settings
To change the download size and format for Outlook e-mail
1. Disconnect your device from the computer.
3. Tap the Tap to scroll right option to be able to scroll sideways and
get a complete horizontal view of the message.
4. Tap Get the rest of this message that’s shown at the bottom of the
2. Tap Start > Programs > ActiveSync.
message to download and view the whole message.
3. Tap Menu > Options, select E-mail, then tap Settings.
4. On the E-mail Sync Options screen:
5. If the e-mail does not download immediately, tap Menu > Send/
Receive.
•
•
Under Download size limit, select the desired e-mail size.
Under Message format, select HTML or Plain text.
6. If images do not immediately appear on the message, tap Internet
pictures blocked then tap Download Internet pictures.
7. Tap Menu and choose whether to reply or forward the message.
8. Enter your response then tap Send.
5. Close ActiveSync and reconnect your device to the computer.
Tip
E-mail can contain hyperlinks to web pages.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁ0 Exchanging Messages
To change the download size and format for POP3/IMAP4 e-mail
1. Tap Menu > Options on the Account Picker screen, or tap Menu >
Tools > Options while you’re in a message list.
2. Tap your e-mail account.
3. Keep tapping Next until you see Message format and Message
download limit on the screen.
4. Under Message format, select HTML or Plain text.
5. Under Download size limit, select the desired e-mail size.
6. Tap Finish.
To automatically receive attachments on Outlook e-mails
1. Tap Start > Programs > ActiveSync.
2. Tap Menu > Options.
3. Tap E-mail > Settings, then select Include file attachments.
To automatically receive attachments on IMAP4 e-mails
1. Tap Start > Messaging.
2. Tap Menu > Options.
3. Tap the name of your IMAPꢂ account.
4. Keep tapping Next until you see the Download attachments item on
the screen.
5. Select a download size from the Download attachments list box.
6. Tap Finish.
To store attachments on a storage card
1. Tap Start > Messaging.
2. Tap Menu > Options > Storage tab.
3. Select the When available, use the storage card to store
attachments check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Working With Company E-mails
and Meeting Appointments
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁꢀ Working With Company E-mails and Meeting Appointments
Working With Company E-mails and Meeting Appointments 1ꢁꢁ
Note
Tip
If you synchronized e-mails with your PC before, open ActiveSync on
your device and tap Menu > Add Server Source to set up an Exchange
Server connection. When you're prompted to select information types for
synchronization, you need to clear the E-mail check box under the Windows
PC item first before you can select E-mail under Exchange Server.
8.1 Synchronizing Your Device with the
Exchange Server
To keep up-to-date with your company e-mails and meeting schedules
while you’re out of the office, you can connect your device to the Internet
wirelessly and synchronize with your company’s Exchange Server.
To change Exchange Server settings, open ActiveSync then tap Menu >
Configure Server.
Set up an Exchange Server connection
Start synchronization
Before you can synchronize or access information on the Exchange Server,
you need to set up an Exchange Server connection on your device. You
need to get the following information from your network administrator and
enter them on your device:
Before you start synchronizing with the Exchange Server, make sure your
device has been set up with a data connection to the Internet so that you
can synchronize wirelessly. For more information about connections, see
Chapter 10.
•
Exchange Server name (must be the Outlook Web Access server
name)
After you finish setting up an Exchange Server connection, your device
automatically starts synchronization.
•
•
Domain name
You can manually start synchronization anytime by tapping Sync in
ActiveSync.
User name and password that you use at work
Note
If you connect your device to your office computer via a USB or Bluetooth
connection, you can use this connection to the PC to “pass through”to the
network and download Outlook e-mails and other information to your
device.
If you have not synchronized your device with your PC, follow these steps to
set up an Exchange Server connection.
1. Tap Start > Messaging > New E-mail Account.
2. Enter your e-mail address. Clear the Try to get e-mail settings
automatically from the Internet check box, then tap Next.
8.2 Working With Company E-mails
3. Select Exchange server in the Your e-mail provider list, then tap
Next.
Your device gives you instant access to your company e-mails and lets
you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail
search, and e-mail flags are just some of the tools you can use to manage
your e-mails.
4. Tap Next again.
5. In Server address, enter the Exchange Server name, and tap Next.
6. Enter your user name, password, and domain, and tap Next.
Note
Some messaging features depend on the Microsoft Exchange Server version
used in your company. Please check with your network administrator for the
availability of these features.
Tip
To change the rules for resolving synchronization conflicts, tap
Advanced.
7. Select the items that you want to sync with the Exchange Server.
Automatic synchronization through Direct Push
8. To change synchronization settings of an information type, for
example, E-mail, select the type of information, and tap Settings.
Direct Push technology (push e-mail feature) enables you to receive new
e-mails on your device as soon as they arrive in your Inbox on the Exchange
Server. With this feature, items such as contacts, calendar and tasks are
9. Tap Finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁꢂ Working With Company E-mails and Meeting Appointments
Working With Company E-mails and Meeting Appointments 1ꢁꢃ
also immediately updated onto your device when these items have been
changed or new entries have been added on the Exchange Server. To make
Direct Push work, you need to have a GPRS connection on your device.
Instant download through Fetch Mail
The Fetch Mail feature downloads an entire e-mail immediately without the
need for you to perform a full Send/Receive action. This limits the download
to just the e-mail message that you want and helps save data cost.
You need to perform a full synchronization between your device and the
Exchange Server first before Direct Push can be enabled.
Requirement
Fetch Mail works for your device only if your company is using
Microsoft Exchange Server 2007 or higher.
Requirement
The Direct Push feature works for your device only if your company
is using Microsoft Exchange Server 2003 Service Pack 2 (SP2)
with Exchange ActiveSync or higher version.
1. Tap Start > Messaging > Outlook E-mail.
2. Tap an e-mail message to open it.
To enable Direct Push via Comm Manager
1. Tap Start > Programs > Comm Manager.
3. By default, only the first few kilobytes of the message is shown. To
download the whole e-mail, finger-scroll to the end of the message
then tap Get the rest of this message.
2. On the Comm Manager screen, tap the Microsoft Direct Push button
to enable or disable the Direct Push function. When enabled, the ON
indicator is activated.
4. A “Downloading message”status appears. Wait for the remainder of
the message body to be downloaded.
Tip
Note
For information about changing e-mail sync options such as the initial
download size limit for e-mail, see "Customize e-mail settings" in Chapter 7.
To enable Direct Push via ActiveSync
1. In ActiveSync on your device, tap Menu > Schedule.
When you receive an e-mail that contains a link to a document such as a PDF
or Microsoft Office document located on SharePoint or an internal file server,
you can tap the link to view the document on your device. You can view the
document only if you have a Microsoft Outlook account that synchronizes
with Microsoft Exchange Server ꢀ007 or later. Exchange Server must also
be set up to allow access to SharePoint document libraries or internal file
servers.
2. Select As items arrive in the Peak times and Off-peak times boxes.
Scheduled synchronization
If you do not want to use Direct Push, you can set a regular schedule for
synchronizing Outlook e-mail and information.
1. In ActiveSync on your device, tap Menu > Schedule.
2. Select a shorter time interval in the Peak times box for you to be able
to receive e-mails more frequently. (Peak times which usually refer to
your working hours when e-mail volume is high).
Search for e-mails on the Exchange Server
You can access messages that are not available on your device by searching
your Microsoft Exchange Server mailbox. The search results will be
downloaded and displayed in a Search Results folder.
3. Select a longer interval in the Off-peak times box.
Requirement
Your company must be using Microsoft Exchange Server 2007 or
higher.
Tip
To set the days and hours that make up your peak and off-peak times, tap
Adjust peak times to fit your schedule.
1. Tap Start > Messaging > Outlook E-mail.
2. Tap Menu > Tools > Search Server.
3. In the Look for text box, enter the search keyword.
4. Choose the date range of messages to search from.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁ6 Working With Company E-mails and Meeting Appointments
Working With Company E-mails and Meeting Appointments 1ꢁ7
5. From the Look in list, choose whether to search from your inbox or
Out-of-office auto-reply
outbox only or to search all folders.
Outlook Mobile allows you to retrieve and
change your out-of-office status. Just like
desktop Outlook E-mail, Outlook Mobile
automatically sends an auto-reply message
when you’re not available.
6. Tap Search.
Flag your messages
Flags serve as a reminder for you to follow-up on important issues or
requests contained in the e-mail messages. Flagging messages, which
has been a useful feature on desktop Outlook E-mail, can also be done in
Outlook Mobile on your device. You can flag received e-mail messages on
your device.
Requirement
Out-of-office auto-reply works
for your device only if your
company is using Microsoft
Exchange Server 2007 or
higher.
Requirement
Flags are enabled only if e-mails are synchronized with Microsoft
Exchange Server 2007 or higher. Flags are disabled or hidden
if e-mails are synchronized with earlier versions of Microsoft
Exchange Server.
To send out-of-office auto-reply messages
1. Tap Start > Messaging > Outlook E-mail.
To flag or unflag a message
1. Tap Start > Messaging > Outlook
E-mail.
2. Tap Menu > Tools > Out of Office.
2. Select a message or open a message.
3. From the I am currently list, select Out of the Office.
4. Enter your auto-reply message then tap Done.
3. Tap Menu > Follow Up and select one
of the following options:
•
Set Flag Mark the message with
a red flag to indicate that it needs
follow up.
8.3 Managing Meeting Requests
When you schedule and send meeting requests from your device, you can
invite attendees to your meeting and check their status to know about their
availability.
•
Complete Flag Mark the message
with a check mark to indicate that
the issue or request in the e-mail is
already completed.
When you receive a meeting request, you can reply by accepting or
declining the request. The meeting request also clearly indicates whether or
not there are conflicting or adjacent meetings.
•
Clear Flag Remove the flag to
unmark the message.
Requirement
Your company must be using Microsoft Exchange Server 2007 or
higher.
Note
E-mail message reminders are displayed on your device if the messages are
flagged with reminders and synchronized from the Exchange Server.
To reply to a meeting request
1. When you receive a meeting request e-mail, a notification will be
displayed on the Today screen. Open the e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁꢄ Working With Company E-mails and Meeting Appointments
Working With Company E-mails and Meeting Appointments 1ꢁꢅ
2. Tap Accept to reply and accept the meeting request, or tap Menu >
Decline if you cannot attend the meeting.
8.4 Finding Contacts in the Company Directory
In addition to having contacts on your device, you can access contact
information from your organization’s Company Directory. By having
over-the-air access to the Company Directory, you can easily send e-mail
messages and meeting requests to anyone in your company.
Tips
•
Before responding, you can check your availability during the time
of the requested meeting by tapping View your calendar.
•
If the time of the meeting conflicts with your other appointments,
a “Scheduling Conflict”status appears on top of the e-mail.
Requirement
Access to the Company Directory is available only if your
organization is running Microsoft Exchange Server ꢀ00ꢁ SPꢀ or
higher, and you have completed your first synchronization with the
Exchange Server.
3. Choose whether or not to edit your response e-mail before sending
then tap OK:
1. Synchronize with Exchange Server if you have never done so.
2. Do any of the following:
•
•
In Contacts, tap Menu > Company Directory.
In a new e-mail message, tap the To box (or tap Menu > Add
Recipient) then tap Company Directory.
4. If you accepted the meeting request, it will automatically be added as
an appointment in Calendar on your device.
To view the list of meeting participants
1. Tap Start > Calendar.
2. Tap a meeting request that you previously sent, then tap Attendees.
The list of required and optional attendees will be listed.
•
In a new meeting request using Calendar, tap Attendees and then
tap Company Directory at the top of the list.
Notes
•
•
•
For information about creating a meeting request, see “To send a meeting
request”in Chapter 6.
3. Enter the part or full contact name and tap Search. In the search
If you select a meeting that you have organized, the list shows who has
accepted or declined the meeting.
results list, tap a contact to select it.
To view an attendee’s contact information, tap the attendee’s name. If
the attendee is included in your contacts list, you will see the contact
information immediately. If the attendee is not in your contacts list, tap
Company Directory to view the contact information.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂ0 Working With Company E-mails and Meeting Appointments
Notes
•
•
You can save a contact from the Company Directory to your device by
selecting the contact then tapping Menu > Save to Contacts.
You can search on the following information as long as that information is
included in the Company Directory: First name, Last name, E-mail name,
Display name, E-mail address, or Office location.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Working With Documents
and Files
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂꢀ Working With Documents and Files
Working With Documents and Files 1ꢂꢁ
9.1 Microsoft® Office Mobile
9.2 Adobe® Reader® LE
Microsoft® Office Mobile consists of the following applications:
Adobe® Reader® LE is an application for viewing PDF (Portable Document
Format) documents on your device. It supports a subset of the features
found in the PC versions of Adobe Reader.
•
Microsoft® Office Word Mobile lets you create and edit documents
and templates in Word Mobile and save them as *.doc, *.rtf, *.txt,
and *.dot files.
To open Adobe Reader LE
•
•
Microsoft® Office Excel® Mobile lets you create and edit Excel
workbooks and templates on your device.
•
Tap Start > Programs > Adobe Reader LE.
To open a PDF file on your device
Do one of the following:
Microsoft® Office PowerPoint® Mobile allows you to view (not
create) slide show presentations in *.ppt and *.pps formats.
•
•
Open a PDF file in Adobe Reader LE.
Open File Explorer and find the desired PDF file, then tap the file to
open it.
To use Microsoft Office Mobile
1. Tap Start > Office Mobile.
2. Tap the Office Mobile application that you want to use.
To navigate through a PDF document
When you are viewing a PDF document, you can do any of the following:
Notes
•
•
Word Mobile does not fully support some features of Microsoft® Office
Word such as revision marks and password protection. Some data and
formatting may be lost when you save on your device a Word document
that was created in Office Word on the PC. To see a complete list of
features that are not supported in Word Mobile, see Help on your device.
•
Use the vertical and horizontal scroll bars (including the Up, Down,
Right and Left arrow keys on the bars) to move to the desired
direction of the page.
•
•
•
Press NAVIGATION up/down/right/left to move to the desired
direction of the page.
Excel Mobile does not fully support some features such as formulas and
cell comments. Some data and formatting may be lost when you save on
your device an Excel workbook that was created in Office Excel on the PC.
To see a complete list of features that are not supported in Excel Mobile,
Tap to move to the previous page; tap to move to the next page.
Tap to jump to the first page; tap to jump to the last page.
see Help on your device.
Tap Tools > Go To to select the desired page to view.
To search for text in the document
1. Tap Tools > Find > Text or tap
on the toolbar.
2. Type in the text to be searched, then tap Find.
3. The matched text in the document will be highlighted.
4. To search for the next occurrence of the text, tap Tools > Find > Next.
Tips
•
Adobe Reader LE displays a bookmark pane for the PDF files that contain
bookmarks. Tap the bookmarks to go to a specific section/page within the
file.
•
Adobe Reader LE supports password-protected PDF files with up to 1ꢀꢄ-
bit encryption. When you open a password-protected PDF file, you will be
prompted to enter the password before the file can be opened.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂꢂ Working With Documents and Files
Working With Documents and Files 1ꢂꢃ
To copy files to a storage card
1. Make sure the storage card is properly inserted into your device.
9.3 Copying and Managing Files
You can copy files between your device and PC, or copy files to a storage
card that is inserted on your device. You can also efficiently manage your
files and folders using File Explorer.
2. Tap Start > Programs > File Explorer and navigate to the
appropriate folder.
3. Tap and hold the file you want to copy, and tap Copy.
4. Tap the Down arrow ( ) then tap Storage Card from the list.
5. Tap Menu > Edit > Paste.
To copy files using Windows Mobile Device Center or ActiveSync
1. Connect your device to the PC.
2. Click File Management > Browse the contents of your device in
Windows Mobile Device Center or click Explore in ActiveSync on
your PC. This opens Windows Explorer on your PC and displays the
contents of your device.
Tip
You can configure programs such as Word Mobile and Excel Mobile to
directly save edited files on your storage card. In the program's file list, tap
Menu > Options then select the storage card in the Save to box.
3. To copy a file from your device to your PC:
9.4 ZIP
a. Browse the contents of your device, right-click the file you want to
copy, then click Copy.
The ZIP program increases the storage capacity of your device by allowing
you to compress files in the conventional ZIP format. It also allows you to
extract files from a zip file.
b. Right-click a folder in your PC, then click Paste.
4. To copy a file from your PC to your device:
To start ZIP on your device
a. Browse the folders on your PC, right-click the file you want to copy,
•
Tap Start > Programs > ZIP.
then click Copy.
Each time you start ZIP, it searches for files that have the .zip file
extension, and displays these files on the Archive List screen.
b. Right-click a folder on your device, then click Paste.
To manage files on your device using File Explorer
To open a ZIP file and extract files
1. Open a zip file by doing one of the following:
File Explorer lets you browse and manage the contents of your device. The
root folder on the device is named My Device, and contains the following
folders: My Documents, Program Files, Windows, and more.
•
•
•
Select a file and tap File > Open Archive.
Tap and hold a file and tap Open Archive.
Double-tap a file.
1. Tap Start > Programs > File Explorer.
2. Tap a folder or file to open it.
Note You cannot select multiple ZIP files.
3. To return to an upper level folder, tap the Down arrow ( ) and select
the folder.
2. From the zip file, select files by doing one of the following:
4. To delete, rename, or copy a file quickly, tap and hold the file then
choose the desired operation from the shortcut menu. To select
multiple files, tap and drag over the desired files.
•
•
Tap to select a file.
To select several files, tap Menu > Action and make sure Multi-
Select Mode is selected. Select files by tapping each file. (Tap a
selected file to deselect it).
•
To select all files, tap Menu > Action > Select All.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂ6 Working With Documents and Files
Working With Documents and Files 1ꢂ7
3. Tap Menu > Action > Extract.
To open Sprite Backup
On your device, tap Start > Programs > Sprite Backup.
•
4. Choose a folder in which files will be extracted to, then tap Extract.
Sprite Backup can operate in two different modes: Basic mode and
Advanced mode.
To create a zip archive
1. Tap File > New Archive.
2. On the Save As screen, enter a zip file name and choose a folder in
which to save the zip file. You can also choose whether the zip file will
be saved on the device’s main memory or a storage card.
3. Tap Save.
4. Tap Menu > Action > Add.
5. Double-tap the folder that contains the files you want to archive.
6. Select files by doing one of the following:
•
•
Tap to select a file.
To select several files, tap and hold on the screen, then select
Multi-Select Mode. Select files by tapping each file. (Tap a
selected file to deselect it).
Basic mode
Advanced mode
•
To select all files, tap and hold on the screen, then tap Select All.
To back up data in Basic mode
Basic mode is the default mode, and allows you to easily back up your entire
device with the tap of a button.
7. Tap Add.
8. Tap Menu > File > Close Archive.
Note
To change backup options or location, you will need to do it in Advanced
mode.
9.5 Backing Up Data
1. On the Basic mode screen, tap Backup Now.
Use Sprite Backup to back up data, which includes settings, files, contacts,
and all other information, to a storage card or to a designated folder on
your device.
2. Specify a password (between 6 to 1ꢃ characters in length) for the
backup file. Enter this password twice, then tap OK.
3. Follow the onscreen instructions to complete the backup.
To install Sprite Backup
1. Make sure your device is connected to your computer via a USB cable.
To restore data in Basic mode
1. On the Basic mode screen, tap Restore Now.
2. Insert the Application Disc on your computer’s CD or DVD drive and
install Sprite Backup to your device. Follow the onscreen instructions
on your computer to complete the installation.
2. Enter the password for the backup file, then tap OK.
3. Follow the onscreen instructions to complete the restoration process.
3. After the installation is completed, the Setup Wizard on your
computer will set up Sprite Backup on your device. Follow the
onscreen instructions to complete the setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂꢄ Working With Documents and Files
To back up data in Advanced mode
Advanced mode is designed for users with more advanced backup
requirements.
1. Tap Options > Switch to Advanced Mode.
2. In the Backup tab, you will see a tree view of the data and files on
your device. Tap the ‘+’symbol at the left of an item to view its sub-
items. Use the check boxes to select or exclude items for backup.
3. Tap the Backup button and follow the onscreen instructions to
complete the backup.
To restore data in Advanced mode
1. On the Advanced mode screen, tap the Restore tab.
2. If there is a most recent backup file, this file will be displayed with its
contents. Otherwise, if you want to use an older backup file, tap
then select the desired file.
If the backup file is password protected, the password must be
entered before the backup file can be displayed in the tree view.
3. In the tree view, select the items you want to be restored.
4. Tap Restore and follow the onscreen instructions to restore.
Note
In both the Basic and Advanced modes, Sprite Backup soft resets your device
first before it begins the backup or restoration process. It soft resets again
after the operation is completed.
To change the backup location and file name
1. On the Advanced mode screen, tap the Backup tab.
2. Tap
then enter the backup file name and choose whether to save
the file to the Storage Card or the My Documents folder on your
device.
3. Tap OK.
To enable remote backup to a computer
1. On the Advanced mode screen, tap Options > Networking.
2. Select the Enable Remote Backup check box and choose whether to
do the remote backup to your PC via ActiveSync or network.
For more information about using Sprite Backup, see Help on your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
Getting Connected
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃ0 Getting Connected
Getting Connected 1ꢃ1
10.1 Comm Manager
10.2 Connection Setup
Comm Manager acts like a central switch that lets you enable or disable
phone features as well as manage your data connections easily.
Connection Setup configures your device’s data connections, such as
GPRS, WAP, and MMS, for you so that you do not need to enter the settings
manually onto your device. All you need to do is to select your network
operator, then Connection Setup does all the configuration for you.
To open Comm Manager
Tap Start > Programs > Comm Manager.
To automatically detect the network operator
The first time you power on your device, or when you insert a new SIM card
and then power on your device, Connection Setup will display a notification
message to inform you that it will automatically configure your device.
1
2
3
4
5
Off/Disabled
On/Enabled
1. Tap Yes on the notification message.
1
Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the
phone and Bluetooth functions. For more information, see "Airplane Mode" in
Chapter ꢁ.
Tap to switch the phone on or off. Tap Settings > Phone to set the ring tone and
other phone settings. See Chapter ꢂ for details.
Tap to switch Bluetooth on or off. Tap Settings > Bluetooth to configure
Bluetooth on your device. See "Bluetooth" in this chapter for details.
Tap to switch between automatically receiving (as items arrive) or manually
retrieving Outlook e-mails. See Chapter ꢄ for details.
Tap to disconnect active data connections (e.g. ꢁG). You cannot reconnect a data
connection in Comm Manager.
Note If your SIM card supports multiple network operator profiles, the next
message that appears will display network profile choices. Select the
profile you want to use and tap OK.
2
3
4
5
2. Next, you will be asked if you want to automatically configure your
device to the proper network settings. Tap Yes.
Connection Setup then configures your device’s data connection
settings.
3. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator
You can also manually select your network operator from Connection
Setup’s settings screen. Connection Setup will then reconfigure your
device’s data connections settings based on the operator that you selected.
1. Tap Start > Settings > Connections tab> Connection Setup.
2. Select the network Country and Operator you want to use.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃꢀ Getting Connected
Getting Connected 1ꢃꢁ
Note If you choose a Country and/or Operator that is different from the
To add a new GPRS/3G connection
installed SIM card network operator, you may not be able to access
network services.
In times when you need to add another GPRS/ꢁG connection on your
device, obtain the Access point name from your wireless service provider.
Also, check if a user name and password are required.
3. Tap OK.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
4. The next message that appears prompts you to confirm whether you
want to configure the data connection settings based on the selected
network. Tap Yes.
Connection Setup then configures the data connection settings.
connection.
5. After the Connection Setup completes the configuration, tap Restart.
4. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap
Next.
10.3 Ways of Connecting to the Internet
Your device’s networking capabilities allow you to access the Internet
or your corporate network at work through wireless and conventional
connections. You can connect to the Internet through one of the following
connections:
•
GPRS, EDGE or ꢁG
•
Dial-up
Note
You can also add and set up the following connections:
•
VPN: A VPN connection is used to access your corporate network by using
an existing Internet connection.
•
Proxy: A Proxy connection is used to access the Internet using an existing
connection to your corporate or WAP network.
5. Enter the Access point name, then tap Next.
6. Enter the user name and password, only if required.
7. Tap Finish.
10.4 GPRS/3G
Notes
•
•
To view help information for any screen, tap the help icon (
).
To modify your connection settings, tap Manage existing connections
on the Connections screen, and complete the connection wizard.
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send
and receive picture messages on your device. You will need a data plan
to use your wireless service provider’s GPRS/ꢁG network. Check with your
wireless service provider to find out about GPRS/ꢁG rates.
GPRS/ꢁG settings are already preconfigured on your device, and your device
is ready to use your wireless service provider’s GPRS/ꢁG services. Do not
change the settings as this may cause services to stop working.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃꢂ Getting Connected
Getting Connected 1ꢃꢃ
10.5 Dial-up
10.7 Internet Explorer® Mobile
To set up a dial-up connection to your Internet Service Provider (ISP) on
Internet Explorer® Mobile is a full-featured Internet browser, optimized for
use on your device.
your device, you need the same settings that you normally use when you
dial up from your computer. This includes the ISP server phone number,
your user name and password.
To open Internet Explorer® Mobile
Tap Start > Internet Explorer.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
To go to a Web site
Enter the Web site address in the Address Bar, then tap
.
3. On the Make New Connection screen, enter a name for the
To view a Web page using finger scrolling and panning
connection.
•
•
Slide your finger upward to scroll down the Web page, or slide your
finger downward to scroll up the Web page.
4. In the Select a modem list, select Cellular Line, then tap Next.
5. Enter the ISP server phone number, then tap Next.
To pan downward, touch and hold on the touch screen then drag
your finger upward. To pan upward, touch and hold on the touch
screen then drag your finger downward.
6. Enter your user name, password, and any other information required
by your ISP.
7. Tap Finish.
•
•
To pan towards the right, touch and hold on the touch screen then
drag your finger to the left. To pan towards the left, touch and hold on
the touch screen then drag your finger to the right.
10.6 Starting a Data Connection
To pan freely around a Web page, touch and hold on the touch screen
then drag your finger in the desired direction.
After setting up a data connection such as GPRS or ISP dial-up on your
device, you can now connect your device to the Internet. The connection
is started automatically when you begin using a program that accesses the
Internet such as Internet Explorer® Mobile.
For more information about finger scrolling and panning, see Chapter 1.
Internet Explorer® menu
While browsing the Web, tap Menu to choose from a list of options, such as
saving Favorites, changing the viewing size, and more. You can also tap and
hold on a Web page to choose options from the shortcut menu.
To manually start a data connection
If you have set up multiple types of data connections on your device, you
can manually start a connection.
1. Tap Start > Settings > Connections tab > Connections.
2. Tap Manage existing connections.
3. Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
1. Tap Start > Programs > Comm Manager.
2. Tap the Data Connection button.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃ6 Getting Connected
Getting Connected 1ꢃ7
For more information about using Internet Explorer® Mobile, please go to:
http://www.microsoft.com/windowsmobile/help/pocketpc/browseinternet.
mspx
10.8 Windows Live™
Windows Live™ gives you full Internet experience on your device. It helps
you to find information, pursue your interests, and get in touch with friends
and family on the Internet easier.
Windows Live™ offers the following key features:
•
•
•
•
Live Search Bar, which lets you search for information on the Web.
Live Messenger, the next generation of MSN Messenger Mobile.
Live Mail, the next generation of Hotmail.
Tap Menu > Add to Favorites to save
the current Web page in your Favorites
folder.
Tap Menu > View to select the text
size and type of view.
Live Contacts, your address book for storing Live Mail, Live
Messenger and Hotmail contacts.
Set up Windows Live™
The first time you use Windows Live™, sign in by using your Windows Live
ID, which is your Windows Live Mail or Hotmail address, and password.
To set up Windows Live for the first time
1. Tap Start > Programs > Windows Live.
2. Tap Sign in to Windows Live.
3. On the next screen, tap the links to read
the Windows Live™ Term of Use and
the Microsoft Privacy Statement. After
reviewing them, tap Accept.
4. Enter your Windows Live™ Mail or
Hotmail address and password, select the
Save password checkbox, then tap Next.
5. Choose whether or not to show
the Windows Live™’search bar and
applications on the Today screen then tap
Next.
Tap Menu > Tools and choose to send
the current Web page link, view the
page’s properties, or set preferences.
To save an image from a Web
page to your device, tap and hold
the image then tap Save Image.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃꢄ Getting Connected
6. Choose what information you want to sync online with your device.
Getting Connected 1ꢃꢅ
Tip
If you chose to display the search bar and Windows Live™ applications on the
Today screen when you were setting up Windows Live, you’ll also see them
on the Today screen. To show or hide them from the Today screen, open
Windows Live and tap Menu > Options > Today screen options.
If you select Store Windows Live
contacts in your mobile phone’s
contact list, your Windows Live
contacts will be added to the
contact list and to Live Messenger
on your device.
Windows Live Messenger
With this mobile version of Windows Live Messenger, you enjoy many of
the same cool features that you get from the desktop version, which include
the following:
If you select Sync e-mail, your
Windows Live Mail or Hotmail inbox
messages will be downloaded to
your device.
•
•
•
•
•
Instant messaging via text and voice
Multiple conversations
Add emoticons
7. Tap Next.
Contact list with presence
8. After synchronization is complete,
tap Done.
Send and receive files including
photos
The Windows Live™ interface
•
•
Change status/display name
On the main interface of Windows Live™, you will see a search bar,
navigation bar, and an area where you can customize to show your picture.
View contacts by online status,
groups, and more
1
•
Send messages even when a contact
is offline
1
2
Live Search Bar
Tap the Left or Right arrow to switch
between Windows Live Messenger,
Live Mail, and Sync status.
Tap to access Windows Live
Messenger settings.
Note
Before you can use Windows Live Messenger, your device must be connected
to the Internet. For information about setting up an Internet connection, see
“Ways of Connecting to the Internet”in this chapter.
2
3
3
4
Launch the messenger and sign in
To open Windows Live Messenger
Tap Menu to access and change
settings.
•
Tap Start > Programs > Messenger.
•
On Windows Live™ or the Today screen, tap the Left or Right arrow
until you see Messenger, then tap it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
160 Getting Connected
Getting Connected 161
To sign in and out
1. Tap Sign in on the messenger screen.
3. In the IM box, enter the e-mail address of the contact, which can be a
Windows Live ID or any other e-mail address.
2. If this is your first time to sign in, a message appears to inform you
that your messenger contacts will be added to the contact list on your
device. Tap OK to add them.
Tip
You can fill in other information about the contact, if desired. This is
not absolutely necessary if you will communicate with the contact only
through Windows Live Messenger or Live Mail.
4. Tap OK.
Signing in may take several minutes, depending on your connection
speed.
5. Follow the remaining instructions to add the new contact to your
Windows Live contact list.
3. To sign out, tap Menu > Sign Out.
To start and end conversations
1. In the contact list, select a contact then tap Send IM to open a
message screen.
10.9 Using Your Device as a Modem
(Internet Sharing)
2. Enter your text message in the text entry area of the message screen.
Internet Sharing connects your PC or notebook computer to the Internet
by using your device’s data connection (GPRS or EDGE, for instance). You
can choose to connect via USB or Bluetooth.
3. To add an emoticon, tap Menu > Add emoticon then tap an icon
from the list of emoticons.
4. Tap Send.
Notes
•
Make sure your device has a SIM card installed, and your device has a
GPRS or phone dial-up modem connection. If your device has not been
set up with a data connection yet, tap Menu > Connection Settings on
the Internet Sharing screen. For more information about setting up these
connections, see "GPRS/ꢁG" and "Dial-up" in this chapter.
5. To end a conversation with the current contact, tap Menu > End
conversation.
Tips
•
•
•
To send a file, tap Menu > Send. You can choose to send a picture, voice
clip or any file.
•
•
If you want to use a USB cable connection, you must first install Windows
Mobile Device Center or Microsoft ActiveSync version ꢂ.ꢃ or later on the
computer.
To invite one or more contacts to the conversation, tap Menu > Options >
Add participant.
To send a voice message, tap Voice Clip on a message screen then start
If want to use a Bluetooth connection, make sure your computer has built-
in Bluetooth capability. If your computer does not have Bluetooth, you
can connect and use a Bluetooth adapter or dongle on your computer.
talking. After you have spoken a message, tap Send.
Add Windows Live contacts
•
•
Before using Internet Sharing, disconnect from Windows Mobile Device
Center or ActiveSync on your computer.
You can add new Windows Live contacts in Live Messenger or in Contacts.
To add a Windows Live contact in Live Messenger
1. Tap Menu > Add new contact.
On your computer, run 3gnetopt.exe from the Application Disc to
optimize the connection speed between your device and computer.
2. Enter the e-mail address of the contact, then tap OK.
To add a Windows Live contact in Contacts
1. Tap Start > Contacts.
2. Tap New then tap Windows Live.
Download from Www.Somanuals.com. All Manuals Search And Download.
16ꢀ Getting Connected
To set up your device as a USB modem
Getting Connected 16ꢁ
c. In the Bluetooth Personal Area Network Devices dialog box, select
your phone, then click Connect.
1. On your device, tap Start > Programs >
Internet Sharing.
For Windows XP:
2. In the PC Connection list, select USB.
a. Tap Start > Control Panel > Network Connections.
3. In the Network Connection list, select
the name of the connection that your
device uses to connect to the Internet.
b. Under Personal Area Network, click the Bluetooth Network
Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
4. Plug in the USB cable between your
d. In the Bluetooth Personal Area Network Devices dialog box, select
your device, then click Connect.
device and the computer.
5. Tap Connect.
Note If the Bluetooth adapter or dongle on your computer was installed
using a third-party provided driver, open the Bluetooth software that
came with the Bluetooth adapter/dongle and enable the adapter/
dongle to be discovered by other devices. Refer to the Bluetooth
adapter’s documentation for more information.
To use your device as a Bluetooth modem
For the computer to use the Internet connection of your device, activate
Internet Sharing on your device, then set up a Bluetooth Personal Area
Network (PAN) between the computer and your device.
8. On the Internet Sharing screen on your device, check if a connected
status is displayed, which indicates that your computer has been
successfully connected to the Internet using your device as a
Bluetooth modem.
1. On your device, turn on Bluetooth and set it to visible mode by
following the steps in “To turn Bluetooth on and make your device
visible”.
To end the Internet connection
2. Initiate a Bluetooth partnership from your device by following the
•
On the Internet Sharing screen, tap Disconnect.
steps in “To create a Bluetooth partnership.“
3. Tap Start > Programs > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
10.10 Bluetooth
5. From the Network Connection list, select the name of the
Bluetooth is a short-range wireless communications technology. Devices
with Bluetooth capabilities can exchange information over a distance of
about eight meters without requiring a physical connection.
connection that your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN)
Bluetooth modes
with your device:
For Windows Vista:
Bluetooth on your device operates in three different modes:
•
On. Bluetooth is turned on. Your device can detect other Bluetooth-
enabled devices, but not vice versa.
a. Click Start > Control Panel > Network and Internet > Network
and Sharing Center.
•
Off. Bluetooth is turned off. In this mode, you can neither send nor
receive information using Bluetooth. Turn off Bluetooth when not in
use to conserve battery power, or in places where using a wireless
device is prohibited, such as on board an aircraft and in hospitals.
b. Click Manage network connections and then under Personal
Area Network, double-click Bluetooth Network Connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
16ꢂ Getting Connected
Getting Connected 16ꢃ
Note
Creating a Bluetooth partnership between two devices is a one-time process.
Once a partnership is created, the devices can recognize the partnership and
exchange information without entering a passcode again.
•
Visible. Bluetooth is turned on, and all other Bluetooth-enabled
devices can detect your device.
By default, Bluetooth is turned off. If you turn it on, then turn off your device,
Bluetooth also turns off. When you turn on your device again, Bluetooth
automatically turns on.
Note
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
To turn Bluetooth on and make your device visible
1. On your device, tap Start > Settings > Connections tab > Bluetooth
> Mode tab.
2. Select the Turn on Bluetooth and Make this device visible to other
devices check boxes.
2. Tap Yes when prompted to establish a partnership with the other
device.
3. Enter a passcode (the same passcode that is entered on the device
requesting the partnership) to establish a secure connection. The
passcode must be between 1 and 16 characters.
3. Tap OK.
4. Tap Next.
5. Tap Finish. You can now exchange information with the paired
Bluetooth partnerships
device.
A Bluetooth partnership is a relationship that you create between your
device and another Bluetooth-enabled device in order to exchange
information in a secure manner.
Tips
•
•
To rename a Bluetooth partnership, tap and hold the partnership’s name
on the Devices tab of the Bluetooth Settings screen, then tap Edit.
To delete a Bluetooth partnership, tap and hold the partnership’s name on
To create a Bluetooth partnership
the Devices tab, then tap Delete.
1. On your device, tap Start > Settings > Connections tab > Bluetooth.
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations, you can use a Bluetooth hands-free
headset such as a car kit with your device. Your device also supports AꢀDP
(Advanced Audio Distribution Profile) which allows you to use a Bluetooth
stereo headset for hands-free phone conversations and for listening to
stereo music.
2. On the Devices tab, tap Add new device. Your device searches for
other Bluetooth devices and displays them in the box.
3. Tap the desired device name in the box, then tap Next.
4. Specify a passcode to establish a secure connection. The passcode
can be 1 up to 16 characters.
5. Tap Next.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are
turned on and within close range, and that the headset is visible.
Refer to the manufacturer’s documentation to find out how to set the
headset in visible mode.
6. Wait for the paired device to accept the partnership. The receiving
party needs to enter the same passcode that you specified.
7. The name of the paired device is then displayed. You may edit and
enter a new name for that device.
2. Tap Start > Settings > Connections tab.
8. Select the check boxes of services that you want to use from the
paired device.
3. Tap Bluetooth > Devices tab > Add new device. Your device
searches for other Bluetooth-enabled devices and displays them.
9. Tap Finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
166 Getting Connected
4. Tap the name of the Bluetooth headset,
Getting Connected 167
If your computer has Windows Vista or Windows XP SP2 and your
computer’s Bluetooth adapter is supported by your Windows version,
do the following steps:
then tap Next.
5. Enter the passcode of the Bluetooth
headset, then tap Next.
a. On your computer, open Bluetooth Devices from the Control
Panel then click the Options tab.
6. Make sure the Hands Free check box is
selected. If you have a Bluetooth stereo
headset, also make sure Wireless Stereo
is selected.
b. For Windows Vista, select Allow Bluetooth devices to find this
computer.
For Windows XP, select Turn discovery on and Allow Bluetooth
devices to connect to this computer.
7. Tap Finish.
While the Bluetooth stereo headset is
c. Create a Bluetooth partnership between your device and
computer. For information about creating a partnership, see
“Bluetooth partnerships”.
connected, the Headset icon (
) will
appear on the title bar.
d. In the Options tab of Bluetooth Devices, select Show the
Bluetooth icon in the notification area.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on
and repeat steps 1 to ꢁ above. Tap and hold the name of the Bluetooth stereo
headset and tap Set as Wireless Stereo.
e. To enable your computer to receive Bluetooth beams, right-click
the Bluetooth icon at the bottom-right of your computer screen
and select Receive a File.
Beam information using Bluetooth
You can beam information, such as contacts, calendar items, and tasks, as
well as files from your device to your computer or to another Bluetooth-
enabled device.
3. Now you are ready to beam. On your device, select an item to beam.
The item can be an appointment in your calendar, a task, a contact
card, or a file.
Note
If your computer does not have built-in Bluetooth capability, you need to
connect and use a Bluetooth adapter or dongle on your computer.
4. To beam a contact, tap Menu > Send Contact > Beam.
To beam other types of information, tap Menu > Beam [type of
item].
To beam information from your device to a computer
1. Turn on Bluetooth on your device, and make your device visible. For
information about this, see “To turn Bluetooth on and make your
device visible”.
5. Tap the device name to which you want to send the beam.
6. If you beamed a calendar, task, or contact item to your computer and
it is not automatically added to Outlook, select File > Import and
Export in Outlook to import it.
2. Next, set Bluetooth on your computer to visible mode, create a
Bluetooth partnership, then enable your computer to receive
Bluetooth beams.
To beam information to a Bluetooth-enabled device such as another
Windows Mobile powered device, follow steps 1 to ꢃ in the above
procedure.
Note If the Bluetooth adapter or dongle on your computer was installed
using a third-party provided driver, open the Bluetooth software that
came with the Bluetooth adapter/dongle and enable the adapter/
dongle to be discovered by other devices. Refer to the Bluetooth
adapter’s documentation for more information.
Tips
•
The default folder on your computer where beamed items are stored
may be C:\Documents and Settings\your_username\My Documents in
Windows XP or C:\Users\your_username\My Documents in Windows Vista.
Download from Www.Somanuals.com. All Manuals Search And Download.
16ꢄ Getting Connected
Getting Connected 16ꢅ
•
For your device to receive Bluetooth beams, tap Start > Settings >
Connections tab > Beam and make sure the Receive all incoming
beams check box is selected.
3. If there are files contained in the Bluetooth shared folder on the other
device, you will be able to see them on the Bluetooth Explorer screen.
Select one or more files, then tap Menu > Edit and choose to cut or
copy the files.
Bluetooth Explorer and Bluetooth file sharing
4. Tap Up twice.
Bluetooth Explorer searches for other Bluetooth devices that have file
sharing enabled and lets you access their Bluetooth shared folder. You
can copy files from and to their shared folder, and create subfolders in it.
When you enable Bluetooth file sharing on your device, other Bluetooth-
enabled devices will also be able to access your Bluetooth shared folder.
5. Navigate to the folder where you want to paste the files on your
device, then tap Menu > Edit > Paste.
Print files via Bluetooth
Connect your device to a Bluetooth printer to print contact information,
appointment details, messages, and other file types.
To enable Bluetooth Explorer and Bluetooth file sharing on your device
1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab.
Note
You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats.
2. Select the Enable Bluetooth Explorer check box. This makes the
\Bluetooth device folder visible in the File Explorer.
Before you start printing, make sure to turn on the Bluetooth printer and
to turn on Bluetooth on your device. To turn on Bluetooth, tap Start >
Programs > Comm Manager and then tap the Bluetooth button. When
enabled, the ON indicator is activated.
3. Select the Enable File Sharing check box.
You can use the default Bluetooth shared folder, or tap Browse to use
another folder as your shared folder.
To print contact information
1. Tap Start > Contacts and then select the contact whose information
you want to print.
To use Bluetooth Explorer
1. Bluetooth Explorer is integrated with the File Explorer program. You
can open it by tapping Start > Programs > Bluetooth Explorer or
by tapping Down arrow ( ) on the upper left of File Explorer then
tapping Bluetooth.
2. Tap Menu > Print via Bluetooth.
3. Tap Menu > Search Device. Your device starts to search for Bluetooth
devices.
2. Bluetooth Explorer then scans for
other Bluetooth devices that have
file sharing enabled. From the list,
tap to select a Bluetooth device you
want to connect to. You may need to
enter a passcode in order for you to
connect to the selected device.
4. Select the Bluetooth printer and tap Menu > Send File.
5. Set the printing options you want and then tap Print.
To print a calendar appointment
1. Tap Start > Calendar and then select the appointment whose details
you want to print.
2. Follow steps ꢀ to ꢃ in the “To print contact information”procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
170 Getting Connected
To print a message
1. Tap Start > Messaging and then select the messaging account where
the message you want to print is located.
2. Select the message you want to print.
3. Follow steps ꢀ to ꢃ in the “To print contact information”procedure.
To print a JPEG file
1. Do one of the following:
•
In Pictures & Videos, select the JPEG file and then tap Menu > Print
via Bluetooth.
•
In File Explorer, tap and hold the JPEG file and then on the menu, tap
Print via Bluetooth.
2. Follow steps ꢁ to ꢃ in the “To print contact information”procedure:
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Experiencing Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
17ꢀ Experiencing Multimedia
Experiencing Multimedia 17ꢁ
The available capture modes of the camera are as follows:
11.1 Camera
Icon
Capture Mode
Taking photos and recording video clips along with audio are easy with
your device’s built-in camera.
Photo: Captures standard still images.
CAMERA button
To open the Camera screen
Video: Captures video clips, with or without accompanying
audio.
Do one of the following:
•
Press the CAMERA button on your
device.
MMS Video: Captures video clips suitable for sending with MMS
messages.
•
Tap Start > Programs > Camera.
Contacts Picture: Captures a still image and gives you the
option to immediately assign it as a Photo ID for a contact.
The screen orientation automatically switches
to landscape mode when you open Camera.
Picture Theme: Captures still images and places them within
frames.
To exit the Camera
Tap the Exit icon (
screen.
) on the Camera
Panorama: Captures a sequence of still images continuously in
one direction, and allows stitching of all the images to create a
panoramic view of a scenery.
Capture modes
Sports: Captures consecutive photo shots (ꢁ, ꢃ, 7, or 10).
The camera on your device allows you to capture pictures and video clips by
using various built-in modes with flexibility. The Camera mode is set to the
Photo capture mode by default. The upper left corner of the screen displays
the active capture mode.
Burst: Captures a sequence of still images (maximum ꢁ0) as long
as the CAMERA button on the device or the ENTER button on the
NAVIGATION CONTROL is kept pressed.
To change the capture mode
Note
When using the ꢀnd camera to capture, you can only use Photo, Video, MMS
Video, Contacts Picture, and Picture Theme modes.
Tap to change the capture mode.
File formats supported
Using the available capture modes, the camera in your device captures files
in the following formats:
Capture type
Format
Still image / Contacts Picture /
Panorama / Sports / Burst
JPEG
Video / MMS Video
H.ꢀ6ꢁ (.ꢁgp) ; MPEG-ꢂ (.mpꢂ)
You can also press NAVIGATION right or left to change the capture mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
17ꢂ Experiencing Multimedia
Experiencing Multimedia 17ꢃ
2
3
Remaining information indicator. In Photo, Contacts Picture, Picture
Theme, Sports, and Burst modes, this shows the remaining, available
shots of pictures based on current settings. In Video and MMS Video
modes, this shows the remaining duration that can be recorded. While
recording video, this shows the recorded duration.
Camera controls
•
•
Press CAMERA or ENTER to take a photo or contacts picture.
Press CAMERA or ENTER to start recording video; press it again to stop
recording.
•
•
•
Press CAMERA or ENTER each time when taking photos for a picture
theme or panorama.
Zoom control. Tapping
/
on the screen allows you to zoom in or
zoom out.
To take consecutive shots in Sports mode, press CAMERA or ENTER,
then move your device to follow the movement of your subject.
Note This control only appears when zooming is supported by the
Resolution you have selected.
Press and hold the CAMERA button or the ENTER button when taking
consecutive shots in Burst mode.
4
5
6
Album. Tap to open Camera Album. See “Camera Album”for details.
Menu. Tap to open the Camera Settings screen.
Recording indicator. This shows a red, flashing indicator while video
Onscreen controls and indicators
recording is in progress.
The onscreen controls and indicators disappear after about ꢁ seconds. To
make the controls and indicators reappear, touch or tap the screen.
9
1
2
6
3
7
8
Picture Theme mode
Sports mode
7
8
Template Selector icon. In Picture Theme mode, tap to toggle
among the different templates.
Video mode
4
5
Photo mode
Progress indicator. In Picture Theme, Sports and Burst modes, this
shows the number of consecutive shots.
1
Mode Switching control. Tapping the left/right arrow (
screen allows you to switch the capture mode.
) on the
/
9
Exit. Tap
to exit the Camera program.
Download from Www.Somanuals.com. All Manuals Search And Download.
176 Experiencing Multimedia
Experiencing Multimedia 177
Zooming
Capture mode
Panorama
Capture size setting
Large (6ꢂ0 x ꢂꢄ0)
Zoom range
1x and ꢀx
Before capturing a still image or a video clip, you can zoom in to make the
object in focus move closer or zoom out to make the object move farther
away.
Medium (ꢁꢀ0 x ꢀꢂ0)
Large (6ꢂ0 x ꢂꢄ0)
1x, ꢀx and ꢂx
1x and ꢀx
Note
The zoom control only appears onscreen when zooming is supported by the
Resolution you have selected.
Sports
Burst
Medium (ꢁꢀ0 x ꢀꢂ0)
Large (6ꢂ0 x ꢂꢄ0)
1x, ꢀx and ꢂx
1x and ꢀx
To zoom in
Press NAVIGATION up or tap
Medium (ꢁꢀ0 x ꢀꢂ0)
1x, ꢀx and ꢂx
.
For capture size settings and zoom ranges when using the ꢀnd camera,
please refer to the online help.
To zoom out
Press NAVIGATION down or tap
.
The camera zoom range for a picture or a video clip depends on the capture
mode and capture size. The following table is a summary.
Quick Settings Panel
The Quick Settings Panel provides a quick way of adjusting the most
common camera settings. Tap on the screen to open the Quick Settings
Panel. Keep tapping a button on the panel, for instance, Resolution, to
cycle through the available settings.
Capture mode
Capture size setting
ꢀM (1600 x 1ꢀ00)
1M (1ꢀꢄ0 x ꢅ60)
Zoom range
No zooming available
1.0x to ꢀ.0x
1.0x to ꢀ.0x
1.0x to ꢂ.0x
1.0x to ꢄ.0x
1x and ꢀx
Note
The available settings on the menu depend on the Capture mode selected.
Photo
Large (6ꢂ0 x ꢂꢄ0)
Medium (ꢁꢀ0 x ꢀꢂ0)
Small (160 x 1ꢀ0)
CIF (ꢁꢃꢀ x ꢀꢄꢄ)
6
Large (ꢁꢀ0 x ꢀꢂ0)
Medium (176 x 1ꢂꢂ)
Small (1ꢀꢄ x ꢅ6)
1x and ꢀx
Video
1
2
5
4
1x and ꢀx
1x and ꢀx
Medium (176 x 1ꢂꢂ)
Small (1ꢀꢄ x ꢅ6)
1x and ꢀx
MMS Video
1x and ꢀx
3
Large (6ꢂ0 x ꢂꢄ0)
Medium (ꢁꢀ0 x ꢀꢂ0)
1.0x to ꢀ.0x
1.0x to ꢂ.0x
Contacts
Picture
1
2
Resolution. Available resolutions include:
See the table in the previous page for the detailed capture sizes.
Storage. Tap to toggle between saving captured photos or video clips
.
Determined by the current
template
Depends on the size of the
template currently loaded
Picture Theme
on the device memory ( ) or on the storage card ( ).
Download from Www.Somanuals.com. All Manuals Search And Download.
17ꢄ Experiencing Multimedia
Experiencing Multimedia 17ꢅ
Icon
Function
3
4
Camera. The camera icon (
camera being used. Tap to cycle through the different cameras.
/
/
) indicates the current
Associate the photo to a selected contact.
Assign to Contacts
Browse
Self-timer. Tap to set the Self-timer to 2 seconds, 10 seconds, or Off
when in the Photo or Contacts Picture mode. When you press the
CAMERA or ENTER button to capture a still image, it starts to count
down, and then captures a still image after the assigned time.
After capturing in Sports or Burst mode, the total
number of consecutive shots is shown in the
top right corner of the Review screen. Tap the
up/down arrow to browse through the sequence
of photos.
5
6
Brightness. Tapping the minus/plus icon (
increases the brightness level.
White Balance. White balance settings include:
Auto ( ), Daylight ( ), Night ( ), Incandescent (
Fluorescent ( ).
/
) decreases or
Tip
You can set the Review screen duration by tapping
screen and then tapping Advanced tab
on the Camera
> Review Duration.
), and
Camera settings
Tap the Menu icon (
) to open the Camera Settings screen. The Camera
The Review screen
Settings screen allows you to configure capture and camera settings.
The Camera settings consist of two tabs: Capture Settings and Advanced.
Use the Capture Settings tab to adjust options for your selected capture
mode. Use the Advanced tab to set the Camera program preferences.
After taking a still image or recording
a video clip, you can view the image or
video clip on the Review screen.
You can either tap onscreen or press the Navigation Control buttons to
navigate the Camera Settings screen.
Capture Settings tab
The available options in this tab depend on the capture mode selected.
Review screen
You can also tap the following icons at the bottom of the Review screen:
Icon
Function
Go back to the live Camera screen.
Back
Remove the captured image or video.
Send via e-mail or MMS.
Delete
Send
•
Effect. Choose a special effect such as Grayscale, Sepia, etc., to
apply to your photos or video clips.
View the image in the Camera Album program,
or play the captured video in Windows Media®
Player.
View
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄ0 Experiencing Multimedia
Experiencing Multimedia 1ꢄ1
•
Time Stamp (Photo, Sports and Burst modes). Choose whether or
not to include the shooting date and time on captured photos.
•
•
Shutter Sound. Choose whether or not you want the camera to make
a shutter sound when you press the ENTER or CAMERA button.
•
•
Template (Picture Theme mode). Select a template.
Grid (Photo mode only). Choose whether or not to show a grid on
the Camera screen. Showing a grid helps you frame and center your
subject more easily and accurately.
Capture Speed (Burst and Sports modes). This determines the
interval between shots. Fast captures consecutive shots at the
shortest interval.
•
•
•
•
•
Snapshots (Sports mode). Select the number of consecutive shots
to capture.
Direction (Panorama mode). Choose in what direction images will
be stitched in a panorama.
Grid
Stitch Count (Panorama mode). Select the number of snapshots
to be taken and stitched into a panorama.
Quality. Select the JPEG image quality level for all captured still
images. Choose from Basic, Normal, Fine, and Super Fine.
•
•
Keep Backlight. Turn the backlight on or off. This overrides your
device backlight settings while you are using the camera.
Metering Mode. Select a metering mode to allow the camera to
measure the amount of light and calculate the best-fit exposure
value before capturing. Choose either Center Area to measure
light using the center area of the image or Average to measure
light using the area all around the image.
Review Duration. Set a time length for displaying the captured
image/video on the Review screen. Select No Limit if you do not want
to impose a time limit. Select No Review to immediately return to the
live Camera screen after capturing and saving.
•
Flicker Adjustment. When taking indoor shots, flicker on the camera
screen may be caused by inconsistencies between the vertical scan
rate of the camera display and the flicker frequency of fluorescent
lighting. To reduce flicker, you can change the flicker adjustment
setting to Auto or to the proper frequency (50Hz or 60Hz) of the
country where your device is being used.
•
Storage. Select where you want to save your files. You can either
save the files to the main memory or to a storage card.
Advanced tab
The available options in this tab depend on the capture mode selected.
•
•
Record with Audio (Video and MMS video modes only). Select On
to record audio with the captured video clips, or select Off to capture
video without audio.
Prefix. When Default is selected as the prefix, the file name of each
new captured file is set to “IMAGE”or “VIDEO”followed by a sequential
number, for example: IMAGE_001.jpg. You may also choose to name
files using either the current Date or Date & Time as the prefix.
•
Capture Format. Select the desired file format.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄꢀ Experiencing Multimedia
Experiencing Multimedia 1ꢄꢁ
Note If you set the Camera to save captured photos to a storage card, the
11.2 Camera Album
prefix cannot be selected. Captured photos will be named using the
convention IMAGnnnn.jpg (where 'nnnn' is the counter) which is the
DCIM (Digital Camera Images) naming standard, and will be saved to
the \DCIM\100MEDIA folder on the storage card.
View your images and videos that you captured using the Camera program
in Camera Album. Camera Album offers a host of features that let you rotate
images, view your images as a slide show, use images as contact pictures,
and more.
•
•
Counter. To reset the file naming counter back to 1, tap Reset.
Recording Limit (Video mode only). Set the duration or file size for
recording video.
Note
Only files supported by the Camera program are displayed in Camera Album.
To know which file formats are supported, see “File formats supported" in the
Camera section.
•
Template Folder (Picture Theme mode only). By default, templates
are stored in the \My Documents\Templates folder on the device’s
Main Memory. If you transferred some templates to a storage card
(via File Explorer), set this option to Main + Card to specify that
templates are located in both the main memory and the storage card.
To open Camera Album
Do one of the following:
•
•
Tap Start > Programs > Camera Album.
In the Touch Cube, touch Photos or Videos.
•
Image Properties. This option allows you to adjust the camera
display properties, such as Contrast, Saturation, Hue, and
Sharpness.
•
In the Camera program, tap
. Depending on the capture mode
you are in, Camera Album will either show still images or video files in
your device. For example, if you are in Photo mode, only still images
will be shown in Camera Album. To view video files, switch first to
2
1
2
Tap a property to adjust.
Video or MMS Video mode before tapping
.
Tap the left/right arrow icon or
press NAVIGATION left/right to
increase/decrease the value.
Touch to go to the Camera
program
1
3
Tap to close the submenu
without applying and saving
the changes.
4
5
Tap to reset all properties to
their default values.
3
4
5
Tap to save the settings.
•
Show Reminder (Contacts Picture mode). Select On if you want the
Camera to always display a message that confirms whether or not to
assign the captured picture to a contact.
Opened from a still image capture mode
Opened from a video capture mode
•
•
Help. Tap to open the Camera program help file.
Tip
If you have a lot of images in your device, scroll up or down by sliding your
finger upward or downward the screen.
About. Tap to view information about the Camera program.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄꢂ Experiencing Multimedia
Experiencing Multimedia 1ꢄꢃ
To view an image
On the main Camera Album screen, touch the thumbnail of the image
To rotate the image
1. View the image you want to rotate.
you want to view. While viewing the image, you can zoom in or rotate the
image. To learn how to zoom and rotate the image, see the succeeding
procedures.
2. With your finger, make a half-circle motion on the screen.
While viewing an image, touch the screen to pop up the onscreen menu.
Slide your finger clockwise to rotate the Slide your finger counter-clockwise to
image ꢅ0 degrees clockwise.
rotate the image ꢅ0 degrees counter-
clockwise.
To zoom in or out of an image
While viewing an image, make a full circle motion on the screen with your
finger.
Function
Function
Icon
Icon
Touch to send the image
via one of your Messaging
accounts.
Touch to start the slide show.
Touch to assign the image as
a contact picture.
Touch to delete the image.
Touch to return to the main
Camera Album screen.
Touch to show you how to use
gestures when viewing photos.
Slide your finger clockwise on an area to Slide your finger counter-clockwise to
To go to the next image
zoom in on that area.
zoom out.
.
Go to the next image by sliding
your finger across the screen from
right to left.
Tips
•
•
When you zoom in on an image, you can double tap the screen to
automatically zoom out and fit the image to the screen.
When you zoom in on an image, touch and hold the screen so you can
pan the image.
Go back to the previous image
by sliding your finger from left
to right.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄ6 Experiencing Multimedia
To view the images as a slide show
Experiencing Multimedia 1ꢄ7
11.3 Pictures & Videos
On the Camera Album screen, touch Slide Show. While viewing the slide
show, touch the screen to show playback controls.
Pictures & Videos allows you to manage the following types of media files
on your device:
File Type
Image
File Extensions
*.bmp, *.jpg, *.gif, *.png
*.gif
Touch to open the slide
show options where you
can set the transition
effect to use, time per
slide, and orientation of
the images.
Touch to return
to the main
Camera Album
screen.
GIF animation
Video
*.avi, *.wmv, *.mpꢂ, *.ꢁgp, *.ꢁgꢀ
*.wma
Audio
To open Pictures & Videos
Tap Start > Programs > Pictures & Videos.
Touch to go back to
the previous image.
Touch to go to the next
image.
Touch to play or pause
slideshow playback.
To copy media files to your device
•
Copy pictures and GIF animation files from your PC or a storage card
to the My Pictures folder on your device.
To play back video files
•
Copy video files to the My Videos folder.
On the main Camera Album screen, touch the thumbnail of the video file
you want to play back. Windows Media Player then plays back the file.
For more information about copying and managing files on your device, see
Chapter ꢅ.
Tip
You can also select the video file and tap Play to play back the file in
Windows Media Player.
To view pictures
1. The images in the My
Pictures folder appear
as thumbnails by
default.
Down arrow
To close Camera Album and go to the Camera program
Go back to the main Camera Album screen and touch
To close Camera Album
or
.
2. Select a picture and tap
View. If you cannot find
a picture in the default
My Pictures folder,
When you open Camera Album from Start > Programs, you can close
Camera Album by going back to the main Camera Album screen and
tapping
.
go to another folder
by tapping the Down
arrow ( ).
Note
When you open Camera Album from the Camera program, tapping
takes you back to the Camera program.
GIF animation
icon
Tap to view the selected image.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢄꢄ Experiencing Multimedia
Experiencing Multimedia 1ꢄꢅ
To play GIF animation files
1. Select a GIF animation file (marked with a
•
•
To crop a picture, tap Menu > Crop. Next, tap and drag to select
the area to crop. Tap inside the box to crop, or tap outside the box
to cancel cropping.
To adjust the brightness and contrast levels of a picture, tap Menu
> Auto Correct.
icon) and tap View.
2. The GIF Animation program then opens and plays the animation.
To play videos
1. By default, the contents of the My Pictures folder will be shown.
Note
To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to
the picture, tap Revert to Saved.
2. To find the video clips that you captured, tap the down arrow (
)
next to the My Pictures folder and tap My Documents > My Videos.
Video clips are displayed as thumbnails by default, which appear with
a media icon (
).
11.4 Windows Media® Player Mobile
3. Tap to select a video and play it in Windows Media® Player Mobile.
You can use Windows Media® Player Mobile to play digital audio and video
files that are stored on your device or on a network, such as on a Web site.
Pictures & Videos menu
Select a media file and then tap Menu to
choose from a list of options that you can
do with the selected media file.
Video File Formats Supported
Windows Media Video
MPEGꢂ Simple Profile
H.ꢀ6ꢁ
H.ꢀ6ꢂ
Motion JPEG
File Extensions
.wmv, .asf
.mpꢂ
.ꢁgp, .ꢁgꢀ
.mpꢂ, .ꢁgp, .ꢁgꢀ, .mꢂv
.avi
You can send the selected media file via
one of your messaging accounts or beam
it to another device. If you selected a
picture, you can associate it to a contact,
set it as your Today screen background,
send it to your Windows Live Space
account, and more. You can also view the
images in the My Pictures folder as a slide
show.
Audio File Formats Supported
Windows Media Audio
WAV
File Extensions
.wma
.wav
MPꢁ
.mpꢁ
MIDI
.mid, .midi, .rmi
.amr
.awb
.aac, .mpꢂ, .mꢂa
.mpꢂ, .mꢂa
.qcp
Note
The available menu options depend on
the selected media file.
AMR Narrow Band
AMR Wide Band
AAC, AAC+ and eAAC+
MPEGꢂ audio
QCELP
To edit a picture
You can rotate, crop, and adjust the brightness and color contrast of your
pictures.
1. On the Pictures & Videos screen, tap the picture you want to edit.
2. Tap Menu > Edit, and do any of the following:
To open Windows Media® Player Mobile
Tap Start > Programs > Windows Media.
•
To rotate a picture ꢅ0 degrees clockwise, tap Rotate.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢅ0 Experiencing Multimedia
Experiencing Multimedia 1ꢅ1
About the controls
The following are available controls on the Windows Media® Player Mobile.
Synchronize video and audio files
Use the latest version of Windows Media® Player on your PC to synchronize
digital media files from your PC to your device. This ensures that protected
files and album art (for skins) are copied to your device correctly.
To synchronize content to your device automatically
1. On your PC, start Windows Media® Player and then connect your
device to your PC.
Tap and drag to
2. In the Device Setup Wizard, select Yes, search my computer now.
jump to any part of
the video or audio
Mute/Unmute
Note If you have previously opened Windows Media® Player and searched
for media on your computer, you will not be prompted to search your
computer.
Full screen
3. You will then see the name of your device (or “Storage Card”if you
have inserted one on your device). Click Finish.
Increase Volume
Decrease Volume
Visit WindowsMedia.com
4. On the left panel of Windows Media® Player, right-click the name of
your device then click Set Up Sync.
Skip to the beginning of
the current file or to the
previous file
Skip to the next file
Note To set up media synchronization on a storage card, right-click Storage
Card in the left panel of Windows Media® Player, then click Set Up Sync.
Play/Pause
5. On the Device Setup dialog box, select Sync this device
automatically.
About the screens and menus
6. Select the playlist(s) that you want to sync between your PC and
device, then click Add.
Windows Media® Player Mobile has three primary screens:
•
Playback screen. The screen that displays the playback controls (such
as Play, Pause, Next, Previous, and Volume) and the video window.
You can change the appearance of this screen by choosing a different
skin.
7. Click Finish.
The files begin synchronizing to your device. The next time you connect
your device to your PC while Windows Media® Player is running,
synchronization will start automatically.
•
•
Now Playing screen. The screen that displays the Now Playing
playlist. This special playlist indicates the current file being played and
any files that are “queued up”to play next.
To synchronize content manually to your device
1. If you have not set up media synchronization between your device
and PC, follow steps 1 to ꢁ in “To synchronize content to your device
automatically”.
Library screen. The screen that lets you quickly find your audio files,
video files, and playlists. It contains categories such as My Music, My
Videos, My TV, and My Playlists.
2. Click the Sync tab on the Windows Media® Player of your PC. Select a
At the bottom of each screen, you can open a Menu. The commands on
this menu vary, depending upon which screen you are viewing. For more
information about the commands in these menus, see Help on your device.
Playlist or a Library on the left panel of the Windows Media® Player.
3. From the Content List, drag the media files that you want to sync to
your device and drop them to the Sync List.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢅꢀ Experiencing Multimedia
Experiencing Multimedia 1ꢅꢁ
Playlists and Library List
Content List
Sync List
To play video and audio files on your device
1. Select a category (for example, My Music or My Playlists).
2. Tap and hold the item that you want to play (such as a song, album, or
artist name), then tap Play.
Tips
•
To play a media file that is stored on your device but is not in a library, on
the Library screen, tap Menu > Open File. Tap and hold the item that you
want to play (such as a file or a folder), then tap Play.
•
To play a media file from the Internet or a network server, tap Menu >
Library then tap Menu > Open URL.
Playlists
In Windows Media® Player Mobile, you can create a new playlist by saving
the current Now Playing playlist and giving it a new name.
4. Click Start Sync to start synchronizing the selected files to your
To save a new playlist
1. If you are not on the Library screen, tap Menu > Library.
device.
Notes
•
•
Use Windows Media® Player 11 or higher on your PC to synchronize media
files to your device.
2. Tap to select a category (for example, My Music or My Playlists).
3. Select a media file that you want, then tap Menu > Queue Up. This
Audio files copy faster if Windows Media® Player is configured to
automatically set the quality level for audio files copied to your device. For
more information, see the Windows Media® Player Help.
adds the file to the Now Playing list.
Repeat this step until you have added all desired media files to the
Now Playing list.
Note You cannot select multiple files simultaneously.
4. After adding the media files, tap Menu > Now Playing.
5. On the Now Playing screen, tap Menu > Save Playlist.
6. Enter the playlist name then tap Done.
Play media
Use the Library to find and play songs, videos, and playlists that are stored
on your device or removable storage card.
To update the Library
1. If you are not on the Library screen, tap Menu > Library.
7. To play back the playlist you created, tap My Playlists in the Library,
select your playlist, then tap Play.
2. On the Library screen, tap the Library arrow (near the top of the
screen), then tap the media storage that you want use, for example,
Storage Card.
Troubleshooting
If you encounter a problem while using the Windows Media® Player Mobile,
a number of resources are available to help you troubleshoot the issue.
3. In most cases, Windows Media® Player Mobile automatically updates
the library. However, you can manually update the library to ensure
that it contains new files that you recently copied to your device or
storage card. Tap Menu > Update Library to manually update the
library list.
For more information, see the Troubleshooting Windows Media® Player
Mobile page at the Microsoft Web site (http://www.microsoft.com/
windows/windowsmedia/player/windowsmobile/troubleshooting.aspx).
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢅꢂ Experiencing Multimedia
Experiencing Multimedia 1ꢅꢃ
To stream media files directly on the Streaming Media Player
Streaming Media only supports RTSP links when you stream *.ꢁgp and
*.mpꢂ files directly on the program.
11.5 Streaming Media
Streaming Media lets you stream live broadcasts or on-demand media
content from the Web. The media is sent in a continuous stream to your
device and is played as it arrives, along with the audio.
Note
Before you launch the Streaming Media program, make sure that you are
connected to the Internet.
1. Tap Start > Programs > Streaming Media.
2. From the program, tap Connect.
3. Enter the URL for the Web site (rtsp://) and the file name.
4. Tap Connect.
5. Streaming Media then starts playing the file. During playback, use
the button controls to play/pause, zoom in or out, adjust the sound
volume, and more.
Jog Bar
Volume level
To view streaming video information
Increase/Decrease
You can view the properties and general information of a streaming video
clip, such as video codec, audio codec, dimension, frames, and duration of
the video.
Full screen
volume
Stop
Tap Menu > Properties from the program.
Play/Pause
Mute/Unmute
To configure streaming video connection settings
Tap Menu > Options to configure the following settings:
The Streaming Media program allows you to play 3GP and MPEG-4 files. It
also supports playback of SDP (Session Description Protocol) files.
•
•
•
Connect via. Choose whether you want to connect to the Internet or
corporate network (intranet) to locate a streaming video clip.
To access streaming content via Internet Explorer
In Internet Explorer, you can open a Web page containing RTSP (Real Time
Streaming Protocol) links to streaming media content then play the content
in the Streaming Media program.
UDP port range. Specify a range of port numbers to use for
streaming.
Media buffer. Specify the memory space (in terms of duration) to
allot for storing video and audio data while streaming media.
1. Tap Start > Internet Explorer.
2. In the address bar, enter the URL address of the Web page that
contains the RTSP link to the desired *.ꢁgp, *.mpꢂ, or *.sdp file.
3. On the Web page, tap the RTSP link.
4. Streaming Media then automatically opens and starts playing the file.
During playback, use the button controls to play/pause, zoom in or
out, adjust the sound volume, and more.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢅ6 Experiencing Multimedia
Experiencing Multimedia 1ꢅ7
11.6 Flash Lite Player
11.7 Audio Manager
Flash Lite Player lets you play back Flash Lite™ animation files, games, and
other types of Flash Lite files on your device.
Audio Manager is a music browser and player in one. It gives you access
to all the music files on your device, and allows you to easily browse for the
music that you want to play by organizing music into categories such as
title, artist, album, etc. You can also create playlists of your favorite songs
and use the integrated Music Player to play them back.
Note
Flash Lite Player only supports playback of Flash Lite (not Flash) files.
To open a Flash Lite File
1. Tap Start > Programs > Flash Lite Player.
To launch Audio Manager
Tap Start > Programs > Audio Manager.
2. Tap Open and locate the Flash Lite file (
3. Tap the file to open it.
) you want to open.
Notes
•
Audio Manager searches for all music files stored on your device memory
and memory card that have the following audio formats: MPꢁ, WMA, AAC,
and AAC+. It will search in the following locations:
Depending on the type of Flash Lite file you opened, you can use the
NAVIGATION CONTROL and/or the hardware keyboard to use the file.
Device:
My Music (including all subfolders)
\My Documents (including all subfolders)
To open a recently played back file
On the Flash Lite Player screen, tap Menu > Recent Files. Select the file you
want to open and tap Open.
Memory card: \Storage Card (including all subfolders)
•
Music files are categorized under Artists, Album, Genre, etc. if such
metadata is found in the files.
To adjust the playback resolution
On the Flash Lite Player screen, tap Menu > Quality and then select a
quality setting.
Library
On the Audio Manager’s Library screen, an arrow that appears in an item
indicates that there is a submenu available. Tap the item name to open the
submenu.
To view a file in full screen
Depending on the file, Flash Lite Player may expand the file to fill the whole
screen or hide the Title and bottom bars.
On the Flash Lite Player screen, tap Menu > Full Screen.
Note
When in full screen mode, you can revert to normal view mode by tapping
and holding an area on the screen and then on the menu, tap Full Screen.
Library: Main screen
Library: All Songs screen
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢅꢄ Experiencing Multimedia
When you tap a category on the Library’s Main screen, you will see more
Experiencing Multimedia 1ꢅꢅ
Playlists
submenus which may have deeper levels of menus. For example, when you
tap Artists, another level of submenus will be listed showing artist names.
When you tap an artist name, more submenus showing album names will
be displayed. Just keep opening the submenus until you reach the level
where song titles can be selected for playback.
The Playlists screen shows the current playlists that are found on the device
memory and memory card.
There are two types of playlists that will be shown on the Playlist screen:
•
Windows Media® Player playlists.
These are playlists that are in Windows
Media® Player Mobile’s Library (which
is synchronized with Windows Media®
Player on your computer), and they
are indicated by the Windows Media®
Music files that are protected by Digital Rights Management (DRM) will be
listed under the Protected category. A lock icon shown before song titles
indicates that the music files are protected. Select a file then tap Info if you
want to view file information. A cross-marked lock icon shown before song
titles indicates that the rights for the music files have expired, and you will
not be able to play them. Tap Delete if you want to delete these files.
Player icon (
in Audio Manager’s Music Player but
cannot be edited.
). They can be played
Note
Audio Manager keeps track of the last submenu that you accessed. When
you exit Audio Manager and open it again, it will display the last submenu
that you were in. Keep tapping the submenu name at the top of the screen
until you reach the Library's Main screen.
•
Custom playlists. These are playlists
that are created in Audio Manager and
can be edited.
Music Player
Notes
•
Audio Manager will search for playlists in the following locations:
When you select a music file in the Library, Music Player opens and
automatically plays it. Use the available buttons to control the playback.
Device: \Playlists
\Application Data\HTC\AudioManager\playlists
Memory card: \Storage Card\Playlists
•
If a Windows Media® Player playlist contains a combination of music,
video and image files, Audio Manager accesses the music files only and
filters out the other media types.
Volume level
Repeat
To create a playlist
1. On the Library’s Main screen, tap Playlists.
Increase/Decrease
volume
Shuffle
2. On the Playlists screen, tap Menu > New.
3. Enter a Playlist name then tap OK.
Play/Pause
Playback time
4. On the Playlists screen, tap the playlist you have just created then tap
Edit.
Drag the slider to
move forward or
Go to next track
backward in a track.
5. Tap Menu > Add.
6. Tap the check boxes to select the songs you want to add to the
playlist, or tap Menu > Select All to choose all the songs.
Go to previous
song
Return to
Library screen
Open a menu where you can choose
to add the current song to a playlist,
set the song as ring tone, and more.
7. Tap OK three times to return to the Playlists screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ00 Experiencing Multimedia
Experiencing Multimedia ꢀ01
To play back a playlist
1. On the Playlists screen, tap to select a playlist.
11.8 Audio Booster
Audio Booster enhances your music experience by providing you with
controls for adjusting sound settings while you are listening to music. It
adds ꢁD sound, treble and bass effects, and provides controls for adjusting
them. It even has an equalizer with presets as well as a control panel for fine
tuning sound.
2. Tap the first song in the selected playlist. Music Player automatically
opens and starts playing the first song. After each song, the next one
in the playlist will be played.
Note
The content of playlists is not automatically updated when music files have
been deleted from the device memory or memory card. Music Player will
display a notification message when music files in a playlist cannot be found.
To access Audio Booster
Tap Start > Programs > Audio Booster.
Set music as ring tone
Note
You need to connect a headset to the device to open Audio Booster.
You can set your favorite music as a ring tone for your device.
1. Use the NAVIGATION CONTROL to select a song in the Library or tap a
song to play it in Music Player, then tap Menu > Set as Ring Tone.
1
2. If the selected music is an MPꢁ file, tap Trim if you want to trim it first
to make it shorter.
2
3
4
Mark the part of the music that
will be used as the ring tone.
Drag the left handle to mark the
start time (mark-in point), then
drag the right handle to mark
5
6
the end time (mark-out point).
Play/Stop
This control
Does this
For more precise marking, you
can also tap these controls to
step backward/forward one
step and mark it.
1
2
3
Equalizer
3D Sound
Treble
Enables or disables the equalizer. Select the check box to
enable the equalizer and to fine tune its settings, if desired.
See "Equalizer" for more information.
Confirm
trimming the
ring tone.
Adds a three-dimensional effect to sound. Drag the slider
to increase or decrease the effect. To disable the ꢁD effect,
adjust the setting to 0%.
Cancel
trimming.
Adds a treble effect to increase the high tones in sound. Drag
the slider to increase or decrease the effect. To disable the
treble effect, adjust the setting to 0%.
3. Tap Set as Default Ring Tone.
Tip
If you only want to save the song to the ring tone folder for future use,
tap Save to Ring Tone Folder. Later on, you can tap Start > Settings >
Personal tab > Phone to set it as your ring tone.
4. A confirmation message is then displayed. Tap OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0ꢀ Experiencing Multimedia
Experiencing Multimedia ꢀ0ꢁ
To create a custom equalizer preset
1. Select the Equalizer check box to
enable the equalizer.
This control
Does this
4
Bass
Adds a bass effect to increase the low tones in sound. Drag
the slider to increase or decrease the effect. To disable the
bass effect, adjust the setting to 0%.
2. Tap
.
5
6
Done
Menu
Tap to apply the modified settings.
3. Adjust the frequency bands to your
desired values by dragging the
•
Tap Menu > Cancel to exit Audio Booster without applying
the modified settings:
equalizer controls. The selected values
are indicated on top of the sliders.
•
Tap Menu > Reset to change back to the default settings.
4. Save your equalizer settings as a preset
by tapping Menu > Save as Preset.
Equalizer
5. Enter a preset name then tap Done.
The Equalizer optimizes sound for a better listening experience. It provides
preset moods, such as hip hop, jazz, rock, etc., and several enhancement
presets that suit different types of music. It also has a 10-band graphic
equalizer that lets you adjust the loudness of sound by frequency.
The preset you created will be added to the
list box.
To delete a custom equalizer preset
1. Select the Equalizer check box then tap
.
To apply a preset
1. Select the Equalizer check box to enable the equalizer.
2. Tap the Equalizer drop-down menu, then select the preset you want
to delete.
2. Tap the Equalizer drop-down menu, then select a desired preset.
3. Tap Menu > Delete Preset.
Note
You can only delete custom equalizer presets. Equalizer presets that are pre-
installed cannot be deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0ꢂ Experiencing Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12
Managing Your Device
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ06 Managing Your Device
Managing Your Device ꢀ07
To switch back to a running program
Do one of the following:
12.1 Adding and Removing Programs
Before you purchase additional programs for your device, make sure that
they are compatible with your device.
•
•
Tap the program name in the Quick Menu.
On the Task Manager screen, tap and hold the program name in the
Running tab, then tap Activate.
To add programs
1. Download the program to your PC (or insert the CD or disk that
contains the program into your PC). You may see a single *.exe file,
a *.zip file, a Setup.exe file, or several versions of files for different
device types and processors. Be sure to select a program designed for
your device and processor type.
To configure the Exit (
) button
You can configure the Exit button to shut down running programs when
the button is tapped, or to just temporarily close the program screen but
keep the program running.
1. On the Task Manager screen, tap the Button tab.
2. Read any installation instructions or documentation that comes with
2. Select the Enable the “X” button to end running programs check
the program. Many programs provide special installation instructions.
box.
3. Connect your device to the PC.
4. Double-click the *.exe file.
Note When the Enable the “X” button to end running programs check box
is not selected, tapping the Exit button will only close a program screen.
The program is not ended and continues to run in the background.
To remove programs
1. Tap Start > Settings > System tab > Remove Programs.
3. Choose the action for shutting down programs (by tapping the
button, tapping and holding the button, or both).
2. In the Programs in storage memory list, select the program you
want to remove, and tap Remove.
4. Tap OK.
To close running programs from the Task Manager
1. Tap the Running tab.
12.2 Using Task Manager
2. Do one of the following:
Task Manager lets you view and stop running programs, configure the
button, and enable the Quick Menu on the Today screen.
•
Select the check box of the programs that you want to close, and
then tap Stop Selected to close them.
To open Task Manager
Do one of the following:
•
•
Tap Stop All to close all programs in the list.
Tap Menu > Stop All but Selected to close all programs except
for those whose check boxes are selected.
•
•
Tap the Quick Menu button on the top right corner of the Today
screen to open the Quick Menu, then tap
Tap Start > Settings > System tab > Task Manager.
.
Tip
You can also close running programs from the Quick Menu on the Today
screen. See "Quick Menu" in Chapter 1 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0ꢄ Managing Your Device
To add a running program to the exclusive list
Managing Your Device ꢀ0ꢅ
Hard reset
If you add a running program to the Exclusive Programs List, it will not be
closed when you tap Stop Selected or Stop All and will not be listed in the
Quick Menu on the Today Screen.
You can also perform a hard reset (also known as a full reset). A hard reset
should be performed only if a normal reset does not solve a system problem.
After a hard reset, the device is restored to its default settings -- the way
it was when you first purchased it and turned it on. Any programs you
installed, data you entered, and settings you customized on your device will
be lost. Only Windows Mobile® software and other pre-installed programs
will remain.
1. On the Task Manager screen, tap the Running tab.
2. Tap and hold the program name in the list, then tap Add Exclusive.
Tip
To remove a program from the exclusive list, tap the Exclusive tab, select the
check box of that program, then tap Remove.
To perform a hard reset
To set the sorting preference for running programs in the Quick Menu
1. On the Task Manager screen, tap the Advanced tab.
1. Press and hold the TALK and END buttons, and at the same time, use
the stylus to press the RESET button at the left side of your device.
2. Choose whether to sort according to Program name or Memory
usage. The list will be sorted in ascending order.
2. Release the stylus, but continue pressing the TALK and END buttons
until you see the following message on the screen:
This operation will delete
all your personal data,
and reset all settings to
the manufacturer default
settings. Press ENTER
to restore manufacturer
defaults, or press any other
button to cancel.
12.3 Resetting Your Device
Soft reset
Occasionally, you may need to reset your device. A soft (or normal) reset
of your device clears all active program memory and shuts down all
active programs. This can be useful when your device is running slower
than normal, or a program is not performing properly. A soft reset is
also necessary after the installation of some programs. If a soft reset is
performed when programs are running, unsaved work will be lost.
3. Release the TALK and END buttons, and then press ENTER on your
device.
Warning! Your device will be set back to factory default settings. Please ensure any
additional installed programs and/or user data have been backed up before
a hard reset is performed.
To perform a soft reset
Remove the back cover and then
with the stylus, press the RESET
button found at the left side of
your device. Your device restarts
Important If Encrypt files placed on storage cards is or was enabled before, then
backup all files from the storage card before using Clear Storage, hard
reset or updating the ROM system software. Otherwise you will no longer
be able to access the encrypted files on the storage card. Use ActiveSync
or Windows Mobile Device Center to transfer files between your storage
card and computer. After the procedure, copy your files back to the storage
card.
RESET button
and displays the Today screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ10 Managing Your Device
Managing Your Device ꢀ11
Clear Storage
12.5 Windows Update
Another way of clearing the device storage and reset all settings back to
You can update Windows Mobile® on your device with the latest updates,
security patches or fixes, if they are available.
factory default settings is to use the Clear Storage feature. You will lose all
your data and files on the device storage when you use Clear Storage, so
make sure to do a backup first.
To set up Windows Update
1. Tap Start > Settings > System tab > Clear Storage.
2. Enter “1234”then tap Yes.
The first time you run Windows Update, you need to set up how you want
Windows Update to check for patches on the Microsoft Web site.
1. Tap Start > Settings > Systems tab > Windows Update.
2. On the Update Setup screen, tap Next.
12.4 Managing Memory
3. Select how you want to check for updates, Manual or Automatic,
then tap Next.
To see how much memory is available for use, tap Start > Settings >
System tab > Memory. On the Main tab, the amount of memory allocated
to file and data storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
Note If you select Automatic, you will be asked if you want to use your
current data plan to check for updates. Select or clear the Use my data
plan to check for and download updates check box and tap Next.
To see available storage card memory, tap Start > Settings > System tab >
Memory > Storage Card tab.
4. Tap Finish.
To check for updates
1. Tap Start > Settings > Systems tab > Windows Update.
If your device is running low on memory, try the following to free memory
on your device:
2. Tap Check Now.
•
•
•
Close programs you are not currently using.
Move e-mail attachments to a storage card.
Note
Windows Mobile® updates may not be available at all times. You can check
the Windows Mobile® Web site for update information.
Move files to a storage card. Tap Start > Programs > File Explorer.
Tap and hold the file, and tap Cut. Browse to the storage card folder
and tap Menu > Edit > Paste.
To change Windows Update options
1. Tap Start > Settings > Systems tab >
Windows Update.
•
•
•
Delete unnecessary files. Tap Start > Programs > File Explorer. Tap
and hold the file, and tap Delete.
2. Tap Menu and select the option you
want to change.
Delete large files. To find your largest files, tap Start > Programs >
Search. In the Type list, tap Larger than 64 KB, and tap Search.
•
Tap Connections to change
how the device connects to
the Internet when checking for
updates.
In Internet Explorer Mobile, delete temporary Internet files and clear
history information. For more information, see “Internet Explorer
®
Mobile”in Chapter 10.
•
Tap Change Schedule to change
how Windows Update checks for
Windows Mobile® updates.
•
•
Remove programs you no longer use.
Reset your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ1ꢀ Managing Your Device
12.6 Battery Saving Tips
How long your battery power lasts depends on battery type and how you
use your device. Try the following to help preserve battery life:
•
•
When the device is not in use, press POWER to switch off the display.
Tap Start > Settings > System tab > Power to open the Power
settings screen. On the Advanced tab of the Power settings screen,
you can specify when your device automatically turns off the display
to conserve battery power. For optimum conservation, specify ꢁ
minutes or less.
•
Use the AC adapter to plug your device into external power whenever
possible, especially when using a storage card or when using a
modem or other peripherals.
•
•
Adjust the backlight settings. For more information, see “To set the
backlight to dim after a time delay”in Chapter ꢂ.
Turn Bluetooth off when you are not using it. Make your device visible
to other devices only when you are trying to establish a Bluetooth
partnership. For more information about Bluetooth, see Chapter 10.
•
•
Lower the volume.
Close battery-intensive programs, such as the Camera, when you are
done using them. Make sure the programs are ended and are not
continuously running in the background.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 13
Using Other Applications
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ1ꢂ Using Other Applications
Using Other Applications ꢀ1ꢃ
) to play the voice tag.
) to delete the voice tag.
To ensure voice recognition accuracy, record your voice in a quiet place.
•
•
Tap the Play button (
Tap the Delete button (
13.1 Voice Speed Dial
You can record voice tags so that you can dial a phone number or launch
programs simply by speaking a word.
Tip
Create a voice tag for a program
1. Tap Start > Settings > Personal tab > Voice Speed Dial.
Create a voice tag for a phone number
1. Tap Start > Contacts to open the Contacts list.
2. The Application tab displays a list of all installed programs on your
device. The procedure for creating a voice tag for a program is the
same as the procedure for creating a voice tag for a phone number.
2. Do one of the following:
•
•
•
Tap and hold the desired contact, then tap Add Voice Tag.
Select the desired contact, then tap Menu > Add Voice Tag.
3. After you have created a voice tag for a program, you can then launch
the program by saying the recorded voice tag after tapping Start >
Programs > Voice Speed Dial.
Tap the desired contact to open the contact’s detailed screen, then
tap Menu > Add Voice Tag.
3. Select the phone number that you want to create a voice tag, then
tap the Record button ( ).
Make a call or launch programs using a voice tag
1. Tap Start > Programs > Voice Speed Dial.
4. When completed, a Voice Tag icon (
) will be displayed on the
2. After a “beep”sound, say the recorded voice tag that you have
assigned to the phone number you want to call or the program you
want to launch. The system will repeat the voice tag and then dial out
or launch the program automatically.
right of the item.
Select the
desired phone
number.
Note
If the system cannot recognize your voice tag, please speak clearly and
reduce the surrounding noise, then try again.
To view and test the voice tags you have created
1. Tap Start > Settings > Personal tab > Voice Speed Dial.
2. The Voice Tag tab displays a list that contains all the voice tags you
have created. Select an item in the list, and you can do one of the
following:
•
•
•
Tap the Record button (
Tap the Play button (
Tap the Delete button (
) to rebuild the voice tag.
) to play the voice tag.
Tap the Record button to start recording.
) to delete the voice tag.
5. When you create a voice tag for the item, you can do one of the
following:
•
Tap the Record button (
) to rebuild the voice tag.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ16 Using Other Applications
Using Other Applications ꢀ17
To run a MIDlet/MIDlet suite
Do one of the following:
13.2 Java
MIDlets are Java applications such as games and tools that can run on
•
•
After installation of the MIDlet/MIDlet suite is complete, tap Yes.
mobile devices, while a MIDlet suite is a collection of one or more MIDlets.
The Java program lets you download, install and manage MIDlets or MIDlet
suites on your device. Your device supports Java ꢀ Micro Edition, JꢀME.
On the Java screen, open the folder that contains the MIDlet/MIDlet
suite. Select the MIDlet/MIDlet suite then tap Launch.
To stop running a MIDlet/MIDlet suite
Tap Exit or Quit if presented on the MIDlet/MIDlet suite’s screen or menu.
To open the Java program
Tap Start > Programs > Java.
Manage MIDlets/MIDlet suites
Install and launch MIDlets/MIDlet suites
You can organize MIDlets/MIDlet suites into folders for easy identification,
rename or update them, and more. If the device memory is full, uninstall
some MIDlets/MIDlet suites to free up memory space.
There are several ways to install a MIDlet/MIDlet suite.
To download and install via Internet Explorer Mobile
1. Tap Menu > Install > Browser to open Internet Explorer Mobile.
To create folders
1. Tap Menu > New Folder.
2. Locate the MIDlet/MIDlet suite while connected to the Internet.
3. Select the MIDlet/MIDlet suite to download.
2. Enter a folder name then tap Create.
4. Information about the MIDlet/MIDlet suite is then displayed. Tap
Continue.
To rename a MIDlet or folder
1. Tap and hold a MIDlet/MIDlet suite then tap Rename. Alternatively,
you can tap Menu > Actions > Rename.
5. Confirm to start downloading.
6. Select <root> or a folder where to install the MIDlet suite to, then tap
OK.
2. Enter a new name, then tap Save.
To update a MIDlet/MIDlet suite
Tap and hold a MIDlet/MIDlet suite then tap Update. Alternatively, you can
tap Menu > Actions > Update.
To install from your device
You can copy MIDlets/MIDlet suites from the PC to your device using the
USB sync cable or Bluetooth connection. Copy them to the root folder or
any subfolder on your device.
Java will search for updates for the selected MIDlet/MIDlet suite where it
was installed from before.
1. Tap Menu > Install > Local Files. The program then searches for
To uninstall MIDlets
MIDlets/MIDlet suites on your device and displays them in a list.
Before you uninstall a MIDlet, make sure that it is not running.
2. From the list, tap the MIDlet/MIDlet suite that you want to install.
3. Confirm to start the installation.
1. Tap and hold the MIDlet, and tap Uninstall.
2. Tap OK to confirm.
4. Select <root> or a folder where to install the MIDlet suite to, then tap
OK.
Note
To uninstall all MIDlets and folders from the current folder, tap Menu >
Uninstall All.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ1ꢄ Using Other Applications
Using Other Applications ꢀ1ꢅ
The GPRS Monitor icon and pop-up window
13.3 Spb GPRS Monitor
Another way of displaying status information visually is by enabling the
GPRS Monitor icon to be shown on the title bar. This icon shows the GPRS/
dial-up connection speed, data traffic, and battery status.
Using Spb GPRS Monitor, you can monitor how much data you have sent
and received on your device, and check the network usage costs by taking
into account your service plan details. You can also view connection cost
and traffic charts, generate reports of network connection usage, and
export reports to CSV files for use with Microsoft® Office Excel® and Access.
To show the GPRS Monitor icon on the title bar
1. Tap Start > Programs > Spb GPRS Monitor.
2. Tap Tools > Options > Icon tab.
Install GPRS Monitor
3. Select the Show taskbar icon check box.
The GPRS Monitor program is included on the Application CD. To install
it onto your device, run the program’s installer on your PC. Follow the
onscreen instructions on your PC and your device to complete the
installation.
By default, the GPRS Monitor icon shows three bars that represent the
following status information:
Icon Bar ꢀ: Traffic
(Full bar corresponds to
100%. Each bar is ꢀ0%.)
The Today Plug-in
After you have installed GPRS Monitor on your device, you will find its
program icon in Start > Programs. In addition, GPRS Monitor is also added
to the Today screen as a plug-in which shows connection statistics, a
brightness panel, battery panel, and shortcut icons.
Icon Bar ꢁ: Battery
(Each bar corresponds to
ꢀ0% of the total charge.)
Icon Bar 1: Speed
(Full bar corresponds
to 1ꢅKB/sec.)
1
When you tap the GPRS Monitor icon
on the title bar, a pop-up window opens
and shows you detailed statistics about data
transfers, such as the data size just transferred
and its cost, the data amount left that you are
allowed to transfer, and more.
2
3
4
5
6
1
Tap to open the GPRS Monitor screen where you can set up monitoring, view
cost and traffic charts, and generate reports.
2
3
4
Tap inside the control bar to adjust the backlight level.
Set up monitoring and notification
To select the connection to be monitored
1. On the GPRS Monitor screen, tap Tools > Options > Connection tab.
This is the battery power monitor. Tap it to access the Power Settings screen.
Tap to toggle between connecting or disconnecting your default data
connection.
5
6
Tap to open Internet Explorer Mobile.
Tap to open Messaging.
2. Select the Enable connection monitoring check box.
3. In the Connection list, select the connection you want to monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ0 Using Other Applications
To enter your service plan details
Service plan details, or tariffs, determine the price that you pay for your
data transfers. The tariff may either be flat rate or time-based, depending on
whether you’re using GPRS or a phone dial-up connection for data transfers.
Contact your service provider to find out about your tariff, and enter the
information in the Tariff tab or the Tariff Details tab on the Options screen.
Note
The calculation of network usage costs is based on the information that you
entered, and is an estimate only. The actual amount billed by your service
provider may differ.
To set up traffic limit notifications
You can set up traffic limit notifications if you want to be notified when a
traffic limit is reached.
1. On the GPRS Monitor screen, tap Tools > Options.
2. Enable the notifications on the Day Warn and Month Warn tabs. You
can specify up to three daily and three monthly limits.
Once traffic reaches one of these limits, you will receive a notification.
View charts and reports
On the GPRS Monitor, you can view network connection cost charts and
traffic charts, as well as generate detailed reports of network connection
usage during a given period of time. These reports can be exported to CSV
files that you can open using Excel, Access, or other similar spreadsheet and
database software.
To view charts and generate reports
On the GPRS Monitor screen:
•
Tap the Chart tab to view the network connection cost charts and
traffic charts.
•
Tap the Report tab to generate reports on network traffic and tariff.
For more information about using Spb GPRS Monitor, see Help on your
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀꢀ Appendix
Appendix ꢀꢀꢁ
A.1 Specifications
Phone
Network
HSDPA/UMTS: ꢀ100 MHz
HSDPA: Up to ꢁꢄꢂkbps for upload and ꢁ.6Mbps for
download;
UMTS: Up to ꢁꢄꢂkbps for upload and download
GSM/GPRS/EDGE: Tri-band (ꢅ00, 1ꢄ00, and 1ꢅ00 Mhz)
(The device will operate on frequencies available from the
cellular network)
System Information
Processor
Qualcomm® 7ꢀ00 ꢂ00 MHz
- ROM : ꢀꢃ6 MB
Memory
- RAM : 1ꢀꢄ MB DDR
(Figures are the total ROM and RAM memory available for use and
storage. Since the memory is shared by the Operating System,
applications, and data, the actual available memory is less than what
is written).
Internal Antenna
Yes
Operating System
Windows Mobile® 6 Professional
Physical
Dimensions
Weight
107 mm (L) x ꢃꢃ mm (W) x 1ꢃ.ꢄ mm (T)
1ꢀ0 g (with battery)
Power
Battery
Rechargeable Li-Polymer battery, 11ꢀ0 mAh
ꢁ hours
Charging Time
Camera Module
Type
Battery Life
(estimates)
Standby time:
GSM: Up to 1ꢄ0 hours
UMTS: Up to ꢀꢃ0 hours
Main Camera: ꢀ megapixel color CMOS camera
Second Camera: CIF CMOS
(Subject to network and phone usage)
Resolution
Photo: 1600 x1ꢀ00 (UXGA), 1ꢀꢄ0 x ꢅ60 (SXGA),
6ꢂ0 x ꢂꢄ0 (VGA), ꢁꢀ0 x ꢀꢂ0 (QVGA), 160 x1ꢀ0 (QQVGA)
Video: 176 x 1ꢂꢂ (QCIF), 1ꢀꢄ x ꢅ6
Talk time:
GSM: Up to ꢃ hours
UMTS: Up to ꢁ hours
(Subject to network and phone usage)
Digital Zoom
Up to ꢄX
Video telephony
Up to 1.7ꢄ hours
Media playback
time
Up to ꢂ.ꢅꢃ hours (WMV)
Up to 6 hours (WMA)
Connections
I/O Port
HTC ExtUSBTM : 11-pin mini-USB and audio jack in one
Hi-speed USB ꢀ.0
AC Adapter
Voltage range/frequency: 100 - ꢀꢂ0V AC, ꢃ0/60 Hz
DC output: ꢃV and 1A
HTC HꢀWire support
Wireless
Connections
Bluetooth ꢀ.0
Display
LCD Type
Resolution
Orientation
ꢀ.6”TFT-LCD with backlight LEDs, touch-sensitive screen
ꢀꢂ0 x ꢁꢀ0 with 6ꢃ,ꢃꢁ6 colors
Car Antenna
Connector
External connector for GSM/EDGE
Portrait and Landscape
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀꢂ Appendix
Audio
Appendix ꢀꢀꢃ
A.2 Regulatory Notices
Audio Controller
AGC
Regulatory Agency Identifications
Ring tone Formats
AAC, AAC+, eAAC+, MPꢁ, WMA, WAV, QCELP, MPEGꢂ,
AMR-NB, AMR-WB
ꢂ0 polyphonic and Standard MIDI format 0 and 1 (SMF) /
SP MIDI
For regulatory identification purposes, your product is assigned a model number of
NIKI100.
To ensure continued reliable and safe operation of your device, use only the
accessories listed below with your NIKI100.
Playback Formats
Audio Manager supported formats: MPꢁ, WMA, AAC, AAC+
The Battery Pack has been assigned a model number of NIKI160.
Note
This product is intended for use with a certified Class ꢀ Limited Power Source,
rated ꢃ Volts DC, maximum 1 Amp power supply unit.
Controls and Lights
Device Control
• HTC TouchFLO™
European Union Notice
• ꢃ-Way NAVIGATION CONTROL / ENTER button
• Two phone functions : TALK and END
• Volume Buttons
• CAMERA button
• POWER button
Products with CE marking comply with the R&TTE Directive (ꢅꢅ/ꢃ/EC), the EMC
Directive (ꢄꢅ/ꢁꢁ6/EEC), and the Low Voltage Directive (7ꢁ/ꢀꢁ/EEC) & (ꢀ006/ꢅꢃ/EC)
issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms
(in parentheses are the equivalent international standards).
• RESET button
• EN 60950-1 (IEC 60950-1)
Safety of Information Technology Equipment.
• ETSI EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; data transmission equipment operating in the ꢀ.ꢂ GHz ISM
band and using spread spectrum modulation techniques.
Hardware
Keyboard
ꢀ0-key QWERTY keyboard
LEDs
The right LED shows Green and Amber lights for HSDPA/
UMTS/GSM/GPRS/EDGE standby, message, and network
status as well as for notification and battery charging
status. Shows a flashing red light when the battery level
reaches ꢃ% or lower.
• ETSI EN 301 511
Global system for mobile communications (GSM); Harmonized EN for mobile
stations in the GSM ꢅ00 and GSM 1ꢄ00 bands, covering essential requirements of
article ꢁ.ꢀ of the R&TTE directive (1ꢅꢅꢃ/ꢃ/EC).
The left LED shows a flashing Blue light when the
Bluetooth system is powered up and ready to transmit/
receive Bluetooth radio signals.
• ETSI EN 301 489-1
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements.
Expansion Slots
Card Slot
• ETSI EN 301 489-7
microSD™ (SD ꢀ.0 compatible)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 7: Specific conditions for mobile and portable radio and ancillary equipment
of digital cellular radio telecommunications systems (GSM and DCS).
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ6 Appendix
Appendix ꢀꢀ7
• ETSI EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for ꢀ.ꢂ GHz wideband transmission systems.
• ETSI EN 301 489-24
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part ꢀꢂ: Specific conditions for IMT-ꢀ000 CDMA direct spread (UTRA) for mobile
and portable (UE) radio and ancillary equipment.
Exposure to Radio Frequency (RF) Signals
Your device contains a radio transmitter and receiver. The radiated output power is
far below the international radio frequency exposure limits. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on the safety standards previously set by
international standards bodies:
• American National Standards Institute (ANSI) IEEE. Cꢅꢃ.1-1ꢅꢅꢀ
• National Council on Radiation Protection and Measurement (NCRP). Report ꢄ6.
1ꢅꢄ6
• ETSI EN 301 908-1 & -2
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1ꢅꢅ6
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations
(BS), Repeaters and User Equipment (UE) for IMT-ꢀ000 Third Generation cellular
networks; Part 1: Harmonized EN for IMT-ꢀ000, introduction and common
requirements, covering essential requirements of article ꢁ.ꢀ of the R&TTE
Directive.
• Ministry of Health (Canada), Safety Code 6. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any
variations in usage.
• EN 50360 / 50361
Product standard to demonstrate the compliance of mobile phones with the basic
restrictions related to human exposure to electromagnetic fields
(ꢁ00 MHz ~ ꢁ GHz).
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
• EN 50392
Generic standard to demonstrate the compliance of low power electronic and
electrical apparatus with the basic restrictions related to human exposure to
electromagnetic fields (10 MHz - ꢁ00 GHz) - General public.
Your device has an internal antenna. Use only the supplied integral antenna. Use of
unauthorized or modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the recommended limits as well
as result in non-compliance with local regulatory requirements in your country.
This equipment may be operated in:
To assure optimal phone performance and ensure human exposure to RF energy is
within the guidelines set forth in the relevant standards; always use your device only
in its normal-use position. Do not touch or hold the antenna area unnecessarily when
placing or receiving a phone call. Contact with the antenna area may impair call quality
and cause your device to operate at a higher power level than needed. Avoiding
contact with the antenna area when the phone is IN USE optimizes the antenna
performance and the battery life.
AT
EE
IT
BE
ES
IS
BG
FI
CH
FR
LT
CY
GB
LU
SE
CZ
GR
LV
SI
DE
HU
MT
SK
DK
IE
LI
NL
TR
NO
PL
PT
RO
Safety precautions for RF exposure
Body-worn measurements were tested for typical body-worn operations with the back
of the device kept 1.ꢃ cm from the body.
• Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
• Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
SAR Information
0.ꢁꢂꢂ W/Kg@10g (Head), 1.ꢃꢅ0 W/Kg@10g (Body)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀꢄ Appendix
Appendix ꢀꢀꢅ
The WEEE logo (shown at the left) on the product or on its box indicates that
Telecommunications & Internet Association (TIA) safety
this product must not be disposed of or dumped with your other household
waste. You are liable to dispose of all your electronic or electrical waste
equipment by relocating over to the specified collection point for recycling
of such hazardous waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of disposal will allow
us to help conserving natural resources. Moreover, proper recycling of the
electronic and electrical waste equipment will ensure safety of human health
and environment. For more information about electronic and electrical
waste equipment disposal, recovery, and collection points, please contact
your local city center, household waste disposal service, shop from where
you purchased the equipment, or manufacturer of the equipment.
information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from their pacemaker when
the phone is turned ON.
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize the potential for
interference. If you have any reason to suspect that interference is taking place,
turn the phone OFF immediately.
RoHS Compliance
This product is in compliance with Directive ꢀ00ꢀ/ꢅꢃ/EC of the European Parliament
and of the Council of ꢀ7 January ꢀ00ꢁ, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) and its
amendments.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your service provider, or call the customer
service line to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device
to determine if they are adequately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 1ꢁth February ꢀ00ꢁ, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and in
addition, to promote the reuse, recycling and other forms of recovery of such wastes
so as to reduce disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁ0 Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁꢀ Index
Index ꢀꢁꢁ
Symbols
ꢁG 1ꢃꢀ
F
Copy
Find contact
A
Customize
AꢀDP 16ꢃ
ActiveSync
Alarm ꢄꢂ
Attachment
C
D
Calculator ꢂꢃ
Calibration ꢀꢃ
Camera
G
Dial-up 1ꢃꢂ
Draw 10ꢅ
Games ꢂꢂ
GPRS/ꢁG 1ꢃꢀ
H
Help ꢂꢂ
B
E
E-mail
Home ꢁ0
HSDPA ꢃ0
Connect device to Internet
Battery
Beam
Bluetooth
EDGE 1ꢃꢀ
Emoticon 11ꢅ
I
IMAPꢂ 1ꢀꢀ
Input methods
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁꢂ Index
Internet 1ꢃꢀ
Index ꢀꢁꢃ
Messaging
MMS 117
Portrait ꢀꢃ
Programs ꢂꢂ
O
J
Java
P
Q
- install MIDlets/MIDlet suites from
device ꢀ16
- install MIDlets/MIDlet suites from
Internet ꢀ16
Panning
QuickTasks ꢀꢄ
Password ꢄꢄ
R
Pictures & Videos
Playback screen (Windows Media Player
Mobile) 1ꢅ0
Record
Reply
Modem
Music playback
K
Keyboard
Reset
L
Ringer 1ꢃ0
Landscape ꢀꢃ
Playlists
Library screen (Windows Media Player
Mobile) 1ꢅ0
Mute 71
Play music
M
S
Plug-in
N
Scrolling
Make call
Now Playing screen (Windows Media
Send
POPꢁ 1ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁ6 Index
Index ꢀꢁ7
Synchronize
V
Settings (Connections tab)
Vibration ꢄꢁ
View
Voicemail 6ꢄ
T
Voice Speed Dial
- create
Settings (Personal tab)
Text messages
Transcriber 61
Troubleshoot
Speakerphone 71
Specifications ꢀꢀꢀ
Voice tag
- create
Volume 6ꢃ
Settings (System tab)
W
Weather ꢁ0
Windows Media Player Mobile
U
Download from Www.Somanuals.com. All Manuals Search And Download.
|