Grundig Flat Panel Television 46 VLE 8160 BL User Manual

LCD TV  
46 VLE 8160 BL  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents--------------------------------------------------------------------------------------------------------------------------------------  
60- operAtion-usinG-externAl-  
DeviCes  
60 DIGI LINK  
-
60 The DIGI LINK functions on your television  
61 Device operation  
62 High definition HD ready  
62 Connection options  
63 Connecting external devices  
64 Using a DVD player, DVD recorder,  
video recorder  
or set-top box  
64 Headphones  
64 Hi-fi System  
66- operAtion-As-A-pC-monitor  
-
66 Connecting a PC  
66 Selecting presets for the PC  
66 Settings for PC mode  
67- operAtion-witH-A-Common-  
interFACe  
-
67 What is a Common Interface?  
67 Inserting the CA module  
67 Access control for CI module and  
smart card  
68- speCiAl-settinGs  
68 Searching for digital television channels  
from a satellite automatically  
-
69 Searching for digital television  
channels from a satellite manually  
69 LNB settings  
70 Settings for motorised antennas  
(DiSEqC 1.2)  
73 Searching for digital terrestrial  
TV channels automatically  
74 Searching for digital terrestrial  
TV channels manually  
75 Tuning analogue television channels  
76 Changing stored analogue channels  
78- inFormAtion  
-
78 Displaying signal information  
79 Technical data  
80 Service information for dealers  
80 Environmental note  
81 Troubleshooting  
83 Additional Information for units sold in the  
UK.  
-3  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------  
7
Please note the following instructions when  
setting up the television set:  
Make sure the power cord or the power sup-  
ply unit (if provided) are not damaged.  
7
7
7
This television is designed to receive and dis-  
Only operate the television with the power  
supply/power cord provided.  
play video and audio signals.  
All other uses are expressly prohibited.  
Thunderstorms are a danger to all electrical  
devices. Even when the television is switched  
off, it can be damaged by a lightning strike to  
the mains or the antenna. Always disconnect  
the mains and antenna plugs during a storm.  
7
The ideal viewing distance is five times the  
diagonal screen size.  
7
Light falling on the screen impairs picture  
quality.  
7
7
Use a damp, soft cloth to clean the screen.  
Do not use water with soap or detergent.  
7
To ensure the device is always adequately  
ventilated, make sure there is sufficient space  
between the television set and nearby furni-  
ture.  
Only clean the housing of your television set  
with the cloth provided. Do not use water with  
soap or detergent.  
7
The television is designed for use in dry rooms.  
7
If you do use it outdoors, make sure it is pro-  
tected from moisture such as rain or splashing  
water.  
When deciding where to put the device, re-  
member that furniture is often coated with  
various types of varnish and plastic. Many of  
these contain chemicals which can corrode  
the feet of the device, leaving marks on the  
surface of the furniture which can be difficult  
or impossible to remove.  
Never expose the television set to moisture.  
7
Do not place any vessels such as vases on the  
television, as they may spill liquid, thus present-  
ing a safety risk.  
7
The screen of your LCD/LED television meets  
the highest quality standards and has been  
checked for pixel faults.  
Despite the great care taken in manufacturing,  
technological reasons make it impossible to  
completely discount the possibility that some  
pixels may be faulty.  
Provided they are within the thresholds speci-  
fied by the DIN norm, pixel faults of this kind  
cannot be regarded as a defect as defined by  
the warranty.  
7
Place the television on a hard, level surface.  
7
Do not place any objects such as newspapers  
on the television or put cloth or similar items  
under it.  
7
Do not place the television close to heating  
units or in direct sunlight, as this will impair  
cooling.  
7
Heat build-up can be dangerous and shortens  
the service life of the television. For reasons of  
safety, have a repairman remove any dirt in  
the television from time to time.  
7
To ensure fires do not occur,  
always keep candles and  
other open flames away from  
the device.  
7
Never open the television under any circum-  
stances. Warranty claims are excluded for  
damage resulting from improper handling.  
-4  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------  
7
Do not connect any other equipment while the  
device is switched on. Also switch off other  
equipment before connecting it.  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
7
Make sure the mains plug is freely accessible.  
7
Do not expose the batteries to excessive heat  
such as direct sunlight, fire, etc.  
7
Do not use old and unused batteries together.  
7
Only replace the exhausted batteries with  
those having the same model, value and prop-  
erties.  
7
By ensuring proper disposal of these batteries,  
you will have contributed in prevention of po-  
tential hazards on the environment and human  
health that may arise from inappropriate dis-  
posal of the batteries.  
Caution:  
7
If you plan on using a wall bracket for your  
television, make sure you read the assembly  
manual for the wall bracket or have a spe-  
cialist assemble it.  
7
When purchasing the wall bracket, make  
sure that all the fastening points on the televi-  
sion are also on the wall bracket and that  
they are all used when mounting it.  
-5  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GenerAl-inFormAtion----------------------------------------------------------------------------------  
7
You can record any digital TV channels you  
special-features-of-your-  
choose.  
-television-set  
The TV channels are converted by the televi-  
7
You can receive and watch digital TV chan-  
nels using your television set (via DVB-S, DVB-T  
sion and saved on an external data medium  
which is connected to the USB socket.  
and DVB-C) – including High Definition pro-  
The saved programmes can be called up and  
grammes (HD). However, the reception of digi-  
played from the archive on the external data  
tal TV channels in HD is currently limited to a  
medium at any time.  
few countries in Europe.  
You can also play a programme from the  
archive while recording another.  
More information on recording and playing  
TV programmes can be found from page 41.  
7
Although this television set complies with the  
current DVB-S, DVB-T and DVB-C standards  
(status: August 2010), the compatibility with  
future DVB-S satellite transmissions as well  
as terrestrial DVB-T and DVB-C cable pro-  
grammes cannot be guaranteed.  
7
Your Grundig television and 3D shutter glasses  
can provide the reality of the cinema when  
you watch 3D movies in your home.  
This TV uses state-of-the-art LED technology to  
give you the best experience 3D has to offer.  
To join the 3D world, you just need to put on  
the Grundig 3D glasses.  
7
Your television set can receive and process  
all analogue and non-encrypted digi-  
tal TV channels. The television set is also  
equipped with digital and analogue receivers.  
7
Smart Inter@ctive TV feature provides your TV  
with the Internet services and pages when it is  
connected to the Internet. You can visit popu-  
lar video and photo sharing sites as well as  
social networks. And you can watch TV and  
listen to radio on web.  
7
The electronic TV guide (for digital channels  
only) informs you about any schedule changes  
at short notice, and provides an overview of  
all the broadcasters' schedules for the next few  
days. Detailed information on the individual  
television programmes are – when provided  
by the broadcasting station – are also avail-  
able in the electronic TV guide.  
7
DLNA feature allows you to use a wired or  
wireless local network to access your content  
that were recorded with DLNA compatible de-  
vices we use at our daily lives such as a PC,  
mobile phone or NAS (Network Attached  
Storage) which are operated as DMS (Digital  
Medial Server). Thanks to DMR feature, when  
DLNA application has been started, you can  
automatically start and stop media playing on  
devices with DMC feature.  
7
You can connect various data media, such as  
an external hard drive, a USB memory stick or  
a digital camera, to the USB socket. Using the  
file browser, you can then select and play the  
file formats of your choice (for example, MP4,  
MP3 or JPEG data).  
7
Using the time shift function, you can quickly  
and easily pause a programme using the re-  
mote control and resume it at a later stage.  
The programme is recorded in an external  
data medium.  
7
Devices that contain and serve video, music  
or image files are called Server. This television  
receives video, music and image files from the  
server through home network, allowing you to  
access and play such media even when your  
television is located in a different room then  
the server. A DLNA compatible device such as  
a PC, mobile phone, NAS or a NAS-like (Net-  
work attached storage) device which operates  
as a DMS (Digital Media Server) is required  
in order to use home network.  
-6  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GenerAl-inFormAtion----------------------------------------------------------------------------------  
7
As switching off the television set does not  
receiving-digital-channels  
completely disconnect it from the mains, pull  
7
You require a satellite antenna to receive  
out the plug to disconnect it from the mains  
digital satellite channels (DVB-S).  
completely.  
Your TV supports SCR system (Satellite Chan-  
7
If the device is equipped with a power switch,  
switching it off using this switch will be suffi-  
nel Router). If your antenna installation is  
equipped with an Single Cable Distribution  
cient. The energy consumed by the television  
multiswitch, all television sets which are con-  
set is reduced to virtually 0 W.  
nected on this antenna can receive the televi-  
sion channels stand-alone.  
7
In standby mode, the television set uses very  
little energy. However, it may be necessary  
to leave the television set in standby mode  
for certain functions (for example automatic  
switch-on and switch-off and for timer func-  
tions).  
7
7
7
You require a digital roof antenna or indoor  
antenna (passive or active indoor antenna  
with its own power supply) to receive digital  
television channels (DVB-T).  
If you wish to receive digital television chan-  
nels via your cable system (DVB-C), the an-  
tenna cable for your cable operator must be  
connected to the television set.  
7
The television set uses less energy when the  
brightness is reduced.  
notes-on-still-images  
Unlike analogue broadcasting, not every  
channel has its own transmission frequency.  
Instead, several channels are grouped into  
what are known as bouquets on a regional or  
national level. You can find the current trans-  
mission information on teletext from various  
broadcasters, or by consulting a current TV  
guide or the Internet.  
Watching the same image for a long time on the  
screen may cause a still image remains feebly on  
the background. Feeble image(s) on the back-  
ground is originated from LCD/LED technology  
and does not require any action under guaran-  
tee. To avoid such cases and/or minimize the  
impact, you may observe the tips below.  
7
Do not allow the same TV channel to stay on  
the screen for a very long time. Channel logos  
may cause this situation.  
7
Various digital television channels from private  
broadcasters are encrypted (DVB-S, DVB-T  
and DVB-C). Watching these channels and  
the recording and playback functions are only  
possible with the appropriate CI module and  
a SmartCard. Ask your specialist dealer.  
The range of channels available from the pub-  
lic broadcasting institutions (ARD with EinsEx-  
tra, EinsFestival or ZDF with ZDF Info and all  
third party broadcasters) are not encrypted  
and can be received without a SmartCard.  
7
Do not allow the images, which are not full  
screen, to constantly stay on the screen; if not  
streamed in full screen format by the broad-  
caster, you can convert the images to full  
screen by changing picture formats.  
7
Higher brightness and/or contrast values will  
lead this impact to appear faster; therefore,  
you are recommended to watch your TV in the  
lowest brightness and contrast levels.  
important-notes-on-  
environmental-protection  
7
The following information will help you to save  
resources – and money as well.  
7
If you are not using your television set for  
several days, you should pull out the mains  
plug for environmental and safety reasons.  
This way the television does not consume any  
electricity.  
-7  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConneCtion-AnD-prepArAtion------------------------------------------------  
Connecting-the-antenna-and-power-cord  
2
3
1
1
To receive digital satellite channels (DVB-S),  
connect the satellite antenna cable to the  
antenna socket »sAtellite« on the televi-  
sion set.  
note:  
7
When connecting an indoor antenna you  
may have to try it out at different positions  
until you get the best reception.  
3
Plug the power cord into a wall socket.  
And/or:  
note:  
2a To receive terrestrial digital broadcasters  
(DVB-T) connect the cable for the rooftop  
or indoor antenna (passive or active indoor  
antenna with its own power supply) to the an-  
tenna socket »Ant-in« on the television set;  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
7
Only use the power cord supplied to connect  
or  
the television set to a suitable earthed safety  
socket.  
2b To receive digital cable channels (DVB-C)  
connect the cable for the rooftop antenna  
to the antenna socket »Ant- in« on the  
television set;  
7
Do not use an adapter plug or extension  
lead which does not meet the applicable  
safety standards. Do not tamper with the  
power cord.  
or  
2c To receive analogue TV channels, connect  
the cable for the rooftop antenna to the an-  
tenna socket »Ant-in« on the television set  
-8  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConneCtion-AnD-prepArAtion------------------------------------------------  
environmental-note  
inserting-batteries-into-the-  
-remote-control  
7
This symbol on recharge-  
able batteries/batteries or  
on the packaging indicates  
that the rechargeable bat-  
tery/battery may not be disposed of with  
regular household rubbish. For certain  
rechargeable batteries/batteries, this sym-  
bol may be supplemented by a chemical  
symbol. Symbols for mercury (Hg) or lead  
(Pb) are provided if the rechargeable batter-  
ies/batteries contain more than 0.0005%  
mercury or more than 0.004% lead.  
Rechargeable batteries/batteries, including  
those which do not contain heavy metal,  
may not be disposed of with household  
waste. Always dispose of used batteries  
in accordance with local environmental  
regulations. Make enquiries about the appli-  
cable disposal regulations where you live.  
1
2
Open the battery compartment by removing  
the lid.  
Insert the batteries (2 x 1.5 V micro, for  
example R03 or AAA). Observe the po-  
larity marked in the bottom of the battery  
compartment.  
3
Close the battery compartment.  
note:-  
7
If the television no longer reacts properly  
to remote control commands, the batteries  
may be flat. Always remove used batteries.  
7
The manufacturer accepts no liability for  
damage caused by leaking batteries.  
-9  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
Connections-on-the-television-set  
AC-in-  
Socket for the mains cable.  
AuDio-out-l-r Sockets for audio output.  
Av1-/-s-vHs  
SCART socket (CVBS signal,  
RGB signal);  
Audio  
Socket for audio  
input for a PC.  
Video and sound socket for  
S-Video camcorder.  
pC-in  
VGA socket, video input  
for PC.  
Component  
---Y-pb-pr  
sAtellite  
Ant-in  
Antenna socket for the  
satellite antenna (DVB-S).  
Sockets for video input  
(YUV signal).  
Sockets for audio input  
(YUV signal).  
Antenna socket for a DVB-T,  
DVB-C and analogue  
antenna.  
l--r  
optic-out  
Socket for audio output  
(optical) for PCM/AC3  
signals.  
For connecting digital AV  
amplifiers or AV receivers.  
-10  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
HDmi2-(ArC) HDMI socket,  
Controls-on-the-television-set  
audio/video input.  
8/i-  
Switches the television on and  
back into standby mode.  
HDmi3  
HDMI socket,  
audio/video input.  
v–--v+  
menu-  
Adjusts the volume;  
selects menu functions.  
HDmi4  
HDMI socket,  
audio/video input.  
-Opens the menu.  
usB2-(HDD)-  
-USB socket for external  
data media and  
PVR function.  
Select a menu option with  
»p+« or »p–«.  
Activate the function with  
»v+«.  
lAn  
Network cable connection  
socket.  
Confirm the function with  
»v+« or »v–«..  
Press »menu« to quit the menu.  
U
Headphone jack (3.5 mm  
jack plug);  
Sockets for audio output.  
sourCe- Opens the pre-selection for  
AV channels.  
In the menu, press »p+« or »p–«  
to select and press »sourCe« to  
confirm.  
Av2  
---video-  
-Video socket for  
camcorder  
p–--p+  
Switches the television on from  
standby;  
selects channels in steps;  
selects function in the menu.  
l--r-  
Audio socket for  
camcorder.  
usB1  
-USB socket for external  
data media without a power  
supply of their own and  
PVR function.  
HDmi1  
Ci- -  
HDMI socket,  
audio/video input.  
-Common Interface Slot.  
-11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
the-remote-control-–-main-functions  
Switches on and off  
(Standby).  
Switches on from standby;  
Selects channel – directly.  
Switches between  
Selects the channel list  
teletext and TV mode;  
opens/closes the control  
menu when playing a file in  
DLNA menu.  
(»All«, »FAV 1« to »FAV 4«).  
Opens the 3D menu.  
Opens the Smart inter@ctive  
menu.  
Displays information.  
Opens the main menu.  
Opens the channel list.  
-Zapping function;  
switches back one menu  
level in the menus.  
Opens the electronic  
TV guide.  
Opens the TOOLS menu.  
Adjusts the volume.  
Opens menu for AV channels  
and USB input.  
Then select using »  
v«, » «,  
<
» « or » « and press »oK«  
Λ
>
to confirm.  
Muting  
Switches on from standby;  
Selects channel – in steps.  
Record, play, pause and  
stop (only digital television  
channels) on/from an exter-  
nal data medium.  
Opens the »PRnP« menu.  
navigation-in-the-menus  
Moves the cursor up  
and down in the menus.  
-
right in the menus.  
-Activates various functions and  
save functions/settings.  
-12  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
7
Ends playback of a programme  
from an external data medium;  
Ends a recording or  
playback in time shift mode;  
Splits the screen in teletext;  
Ends playing in DLNA and vTuner  
menu.  
the-remote-control-–--  
All-functions  
@
Opens the Smart inter@ctive menu.  
-  
-
Selects pages in teletext;  
Selects/activates various functions  
in the menus.  
(red)  
  
(green)  
(yellow)  
(blue)  
  
  
Selects different audio languages  
(only for digital television chan-  
nels)  
5
Selects different audio settings;  
Switches to double character size  
in teletext;  
Selects different subtitles  
(only for digital television chan-  
nels)  
Selects the next title/next picture in  
the file browser.  
note:-  
6
3
4
Selects different picture settings;  
Refreshes a teletext page;  
Selects the previous track/previous  
picture in the file browser.  
7
Your TV supports remote control feature  
for Apple iPhones and Android phones.  
Depending on the features of your TV,  
you may control your TV by your phone  
after downloading the free »GRUNDIG  
TV Remote« application from Apple App.  
Store or Android Market and install it on the  
Apple iPhone/Android phone.  
Stops scrolling through pages in  
teletext;  
Starts a fast reverse search in the  
file browser.  
Selects the channel list ( »All«,  
»FAV 1« to »FAV 4«);  
Reveals answers in teletext;  
Starts a fast forward search in the  
file browser.  
Starts the recording (  
tal television channels  
only for digi-  
, the record-  
ing is made on an external data  
medium).  
8
Starts playing a programme from  
an external data medium;  
Repeats a recorded programme;  
Starts playing in DLNA and vTuner  
menu.  
!
Freeze frame, if no external data  
medium is connected;  
Playback pause;  
Time shift mode (only for digital  
television channels and when  
an external data medium is con-  
nected);  
Pauses the file being played in  
DLNA and vTuner menu.  
-13  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
selecting-language,-country-and-  
operating-mode  
initial-set-up-and-tuning-  
-television-channels  
The television set is equipped with automatic  
channel search, which searches for satellite  
channels (DVB-S), terrestrial channels (DVB-T),  
cable channels (DVB-C) and analogue channels.  
1
Switch on the television set from standby with  
»8«, »1…0« or »p+« or »p-«.  
– During initial set-up, the »Installation Guide«  
will be displayed.  
You start the search and the television channels  
will be stored into the Program Table. Following,  
you can sort the television channels in the Pro-  
gram Table.  
Help:-  
7
If this menu is not displayed, restore the  
television set to its default settings (see  
page 59).  
For DVB-S channels there are 6000 presets  
available, for DVB-T and DVB-C channels 1000  
presets, and 99 presets for analogue channels.  
2- Select the menu language with » «, » «,  
<
>
»v  
« or »  
Λ« and press »oK« to confirm.  
3- Select the mode with » « or » « and press  
<
>
»oK« to confirm.  
the-various-settings  
– The settings used in »Home Mode« help to  
save energy.  
– Alternatively, the menu item »Shop Mode«  
can be selected which the retailer can use  
for demonstrating the device functions.  
Depending on the type of antenna connected,  
you can decide which channels you would like  
the television to search for.  
7
Tunes digital television channels from the satel-  
lite, from page 15.  
note:  
You have two options for this search:  
– the basic installation which presets a stand-  
ard selection, e.g. the satellite Astra 19.2°  
East; you need only start the search;  
– the professional installation, which allows  
you to make all required settings and set pa-  
rameters for your receiver system.  
7
End the »Shop Mode« by restoring the televi-  
sion set to its default settings (see page 59).  
4- Select the country in which the television set  
is operated with » «, » «, »v« or »Λ« and  
<
>
press »oK« to confirm.  
– The »Source Setup« menu appears with the  
»Connection Type« line marked.  
7
Tunes digital terrestrial television channels, on  
page 17.  
note:  
7
You can find a description of how to tune  
7
Tunes digital television channels from the  
cable provider, on page 17.  
the television channel of your choice – de-  
pending on the antenna connected – in the  
following chapters.  
7
Tunes analogue television channels, in the  
chapter “Special functions”, starting on  
page 75.  
7
Further settings for digital television chan-  
nels after the initial set-up can also be found  
in the chapter “Special Settings”, starting on  
page 68.  
note:-  
7
Make the language and country selection for  
all types, then continue reading the respective  
chapter.  
-14  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
Advanced-installation  
tuning-the-television-channels-  
from-satellite-(DvB-s)  
You have two options for tuning digital satellite  
channels.  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Satellite«  
with » « or » «.  
<
>
2
Select the line »Advanced Installation« with  
A
B
The easy installation,  
which pre-configures all antenna settings for  
the satellite channels on Astra 19.2° East.  
»
v« or »Λ« and press »oK« to confirm.  
– The menu appears.  
20.07.2011  
15:46  
The advanced installation  
INSTALLATION  
ANTENNA SETTINGS  
can be used if you wish to receive satellite  
channels from various satellites. To do so,  
you must make the antenna settings (Satel-  
lite, LNB Power, LNB Type, DISEqC Mode,  
LNB Selection) for the satellites chosen.  
Satellite  
ASTRA 2A°,E  
10714  
Off  
Transponder  
LNB Power  
LNB Type  
easy-installation  
Universal  
Off  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Satellite«  
with » « or » «.  
DISEqC Mode  
LNB Selection  
Off  
<
>
2
Select the line »Easy Installation« with »  
or » « and press »oK« to confirm.  
v«  
Low  
Normal  
Good  
Λ
Quality  
– Other menu options will be displayed,  
the satellite Astra 19.2° East is preset.  
Signal strength  
Exit  
Auto Tuning  
Back  
3
Start the scan with » « (green).  
Manual Tuning  
  
– The »Search results« menu appears, and  
the scan for TV channels begins.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
3
Select the line »Satellite« with »  
v« or »Λ«  
and press »oK« to confirm.  
– The »SELECT SATELLITE« menu appears.  
Select the satellites with »v«, »Λ«, » « or  
<
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
» « and press »oK« to confirm.  
>
note:  
note:  
7
The setting in the line »Transponder« is not  
required for this automatic scan.  
7
You can abort the scan by pressing  
»menu«.  
4
5
Select the line »LNB Power« with »  
v« or  
»
Λ«.  
Depending on the type of LNB, set the LNB  
power supply to »13/18 V« or »14/19 V«  
with » « or » «.  
<
>
Select the line »LNB Type« with »v« or »Λ«.  
Select the type of LNB installed with » «  
<
or » «.  
>
-15  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
6- Select the line »DISEqC Mode« with »  
v
«
11 Start the scan with » « (red).  
or »Λ«.  
– The »Results« menu appears, and the scan  
for TV channels begins.  
Select »DiSEqC 1.0« or »DiSEqC 1.1« in  
accordance with the existing antenna system  
with » « or » «.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
<
>
– DiSEqC 1.0 allows up to four satellites to  
be received simultaneously.  
– DiSEqC 1.1 allows up to 16 satellites to be  
received simultaneously.  
note:  
7
7- Select the line »LNB Selection« with »  
«.  
v« or  
You can abort the scan by pressing  
»menu«.  
»Λ  
Select the setting for the respective satellites  
with » « or » «.  
12 Press »menu« to end the setting.  
<
>
note:  
8- Once the settings for the satellite have been  
made, switch to the »AUTOMATIC CHAN-  
NEL SEARCH« menu with »« (red).  
7
If other television channels are to be tuned  
from a second satellite, proceed as follows:  
Open the menu with »menu«, select the  
line »SOURCE SETUP« with »v« or »Λ«  
20.09.2010  
SOURCE SETUP  
15:46  
AUTOMATIC CHANNEL SEARCH  
and press »oK« to confirm. Then select the  
»Automatic Channel Search« with » « or  
« and press »oK« to confirm. Confirm  
the line »Select Satellite« with »oK« and  
select the preferred satellite with » «, » «,  
v
»Λ  
Connection Type  
Select Satellite  
Scan Mode  
Satellite  
ASTRA 2A , E  
Free + Scramble  
v
Λ
» « or » «. Start the scan with » « (red).  
<
>
Service Type  
All  
Continue the adjustment by step 7 of the  
chapter.  
Network Search  
Off  
note:  
7
Before recording HD channels, please  
check signal quality and Strength, see  
chapter "Displaying signal information" on  
page 78. If the level is displayed in green,  
you can record HD channels without any  
problems.  
Exit  
Back  
Start Search  
9
Select the line »Scan Mode« with »  
or » «.  
Select the scan mode with » « or » «  
(for unencrypted channels, for encrypted  
channels only, or for both).  
v«  
Λ
<
>
10 Select the line »Service Type« with »  
or » «.  
Use » « or » « to select whether you  
v«  
Λ
<
>
want to search for television channels only  
(TV), radio stations only (Radio) or both  
(Radio + TV).  
-16  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
tuning-terrestrial-television-  
channels-(DvB-t)  
tuning-television-channels-from-  
the-cable-provider-(DvB-C)  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Cable«  
with » « or » «.  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Air« with  
» « or » «.  
<
>
<
>
2
Select the line »Scan Type« with »v« or »Λ«.  
2
Select the line »Scan Type« with »  
«.  
Use » « or » « to set the required scan  
v« or  
Use » « or » « to set the required scan type:  
<
>
»Λ  
– »DTV«, scan for digital television channels;  
– »ATV«, scan for analogue television channels;  
<
>
type:  
»DTV & ATV«, scan for analogue and  
digital television channels.  
– »DTV«, scan for digital television channels;  
– »ATV«, scan for analogue television  
channels;  
3
Select the line »Cabel Scan Type« with »  
or » «. Select the preferred option (»Quick«  
or »Full«) with » « or » «.  
– The search function »Quick« sets up the  
channels according to the information pro-  
vided by your cable provider in the trans-  
mission signal.  
v«  
Λ
»DTV & ATV«, scan for analogue and  
digital television channels.  
<
>
Caution:  
7
The antenna power supply (5V ) may only  
be switched on if the antenna is an active  
indoor antenna with a signal amplifier and it  
is not already supplied with a voltage via a  
mains plug (or similar supply). Otherwise  
you may cause a short circuit and irrepara-  
bly damage your antenna.  
– If the option »Full« is selected, the entire  
frequency range will be scanned. The  
search can take a long time with this op-  
tion. This option is recommended if your  
cable provider does not support the scan  
type  
»Quick«.  
3
4
Select the line »Active Antenna Power« with  
note:  
»v«  
or »Λ«.  
7
You can accelerate the search. To do this,  
you need information about the frequency  
and network ID. You are usually able to get  
this data from your cable operator or find it  
in forums on the Internet.  
Switch on the antenna power supply for the  
antenna with » « or » « (»On«).  
<
>
Start the scan with » « (green).  
  
– The »Search Results« menu appears, and  
the search for TV channels begins.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
4
Start the scan with » « (green).  
  
The »Search Results« menu appears, and  
the search for TV channels begins.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
note:  
7
You can abort the scan by pressing  
»menu«.  
note:  
7
You can abort the scan by pressing  
»menu«.  
5
Press »menu« to end the setting.  
note:  
5
Press »menu« to end the setting.  
note:  
Before recording HD channels, please check  
signal quality and Strength, see chapter  
"Displaying signal information" on page 78.  
If the level is displayed in green, you can  
record HD channels without any problems.  
7
Before recording HD channels, please  
check signal quality and Strength, see  
chapter "Displaying signal information" on  
page 78. If the level is displayed in green,  
you can record HD channels without any  
problems.  
7
-17  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
selecting-channel-lists  
Changing-the-program-table-for-  
the-digital-channels  
1
Open the menu with »menu«.  
Channels which are found using the scan are  
saved in the »PROGRAM TABLE«.  
2
Select the »SOURCE SETUP« menu with »v«  
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
You can delete channels which are not required  
from the programe table, you can change the  
order of channels within the programe table and  
lock individual channels (Parental control).  
3
Select the line »Programe Table« with »v«  
or »Λ« and press »oK« to confirm.  
– The menu »PROGRAM TABLE« appears.  
You can also add channels to the favourites list;  
in addition, you can change the order of chan-  
nels within the favourites list.  
important:  
7
Programe table and favourites lists are  
saved separately according to the different  
input sources (satellite, cable, air).  
With » « (green) you can display the channels  
  
which belong to one network.  
7
When opening the programme table, the  
respective channel list for the current input  
signal appears.  
Switch to the next page in the programe table  
with »p+« and to the previous page with »p-«.  
note:  
If in the Program Table  
to the name of the channel, you need a  
CI module and a Smart-Card for watching  
these channels.  
With »  
« (yellow) you can open the »LIST  
  
7
appears added  
MANAGEMENT« within the programe table.  
In this List Management you can create your  
own favourites lists.  
With »  
« (blue) you can sort the channels ac-  
  
cording different criteria.  
INSTALLATION  
PROGRAM TABLE  
Network ALL  
1
Das Erste HD  
Service  
ALL  
2 ZDF HD  
3 arte HD  
4 N24  
5 Einsfestival  
DTV  
1 Das Erste HD  
DTV  
DTV  
DTV  
DTV  
6 EinsPlus  
7 arte  
8 Phoenix  
9 Test-R  
10 ANIXE HD  
DTV  
DTV  
DTV  
DTV  
DTV  
11 HD 1  
12 Life  
13 Film  
14 Promo  
15 Sport1  
DTV  
DTV  
DTV  
DTV  
DTV  
16 TV Sport  
17 Sat.8  
18 SKY  
19 TV6  
20 TV5  
DTV  
DTV  
DTV  
DTV  
DTV  
Edit  
Network  
Add To Fav.  
Sort  
Exit  
Back  
Select Favorite  
-18  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
Deleting-channels  
skipping-channels  
1
In the »PROGRAM TABLE« menu, select the  
Edit mode by pressing » « (red)  
You can mark television channels which should  
be skipped when selecting with »Λ« or »v«.  
.
It is still possible to select them using the number  
buttons.  
2
Select the television channel to be deleted  
with  
»
v
«, »  
Λ
«
,
» « or » « and press  
»
«
  
<
>
1
2
3
In the »PROGRAM TABLE« menu, switch  
(yellow) to delete.  
over to the list view with » « (yellow).  
  
note:  
Select the preferred channel with »  
v«  
7
You can delete all channels with »  
(blue).  
«
«
  
or »Λ«.  
Select the column »Skip« with » « or » «  
3
4
Confirm the deletion process with »  
<
>
  
and use »oK« to mark the channel.  
(green);  
or  
– The channel is marked by »«.  
cancel the deletion process with » « (red);  
4
Quit the program table with »menu«.  
Quit the program table with »menu«.  
note:  
7
Channels can also be reactivated. Select the  
channel with » « or » «, then select the  
column »Skip« and reactivate the channel  
with »oK«  
Change-the-order-of-the-channels-in-  
the-program-table  
1
v
Λ
In the »PROGRAM TABLE« menu, select the  
Edit mode by pressing » « (red)  
.
.
Creating-lists-of-favourites  
You can save your favourite channels in up to  
four favourites lists (FAV 1 to FAV 4).  
2- Select the channel which should be moved  
with » «, » «, » « or » « and mark it with  
» « (red).  
v
Λ
<
>
notes:  
3
Move the channel to its new position with  
7
»
v«, »  
Λ
«, » « or » « and press »oK« to  
Favourites lists must be created separately  
for all input sources (satellite, cable, air).  
<
>
confirm.  
7
note:  
You can select the favourites list by pressing  
»FAv«.  
7
Repeat steps 2 and 3 if you would like to  
change other channels.  
1
2
3
In the »PROGRAM TABLE« menu, switch  
over to the list view with » « (yellow).  
  
4
Quit the program table with »menu«.  
Select the channel of your choice with »  
or »Λ«.  
v«  
sorting-channels-in-the-program-  
table  
You can sort the order of the channels in the pro-  
gram table according different criteria: in order  
of Satellite, alphabetical or in order of encryp-  
tied/free channels.  
“Push” the channel into the favourites  
lists 1 to 4 with » « or » « and press »oK«  
<
>
to confirm.  
– The position in the favourites list is marked  
with »«.  
1
In the »PROGRAM TABLE« menu, select the  
Sort mode by pressing « (blue)  
– You can enter the same channel in more  
than one favourite list.  
»
.
  
2- Select the sort criteria with » « (red), »  
«
  
– Each favourite list can store up to 255  
channels.  
(green) or  
»
« (yellow).  
  
3
Quit the program table with »menu«.  
-19  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
note:  
enter-own-names-for-the-favourites-  
lists-(max.-6-characters)  
You can enter own names for all favourites lists.  
7
Channels can also be deleted from the  
favourites lists. Select the channel to be  
deleted with » «, » «, » « or » « and  
press »oK« to delete it.  
v
Λ
<
>
1
In the »PROGRAM TABLE« menu, switch over  
● ● ●  
to the list view with » « (yellow).  
7
When deleting a channel from the favourites  
list, the order within the favourites list will be  
updated.  
2
Select the desired favourites list with »1« till  
»4«.  
– The Favorite Name screen is displayed.  
4
Quit the program table with »menu«.  
3
4
Delete the „old“ name (FAV1), for this  
sorting-channels-in-the-favourite-list  
You can change the order of channels in the  
favourites list.  
purpose select with »v«, »Λ«, » « and  
<
» « the push button »x« and delete the  
>
character with »oK«.  
1
In the »PROGRAM TABLE« menu, select the  
favourites list »1« to »4«.  
Select the required character/numeric with  
»
v
»oK«.  
«, »  
Λ«, » « and » « and confirm with  
<
>
2- Select the channel which should be moved  
with » «, » «, » « or » « and mark it with  
» « (red).  
v
Λ
Repeat the procedure for further characters/  
numerics.  
<
>
– Select »ABC« for uppercase and »abc«  
for lower case and confirm with »oK«.  
– Select »?@123« for numbers and  
symbols and confirm with »oK«.  
3
Move the channel to its new position with  
»
v«, »Λ«, » « or » « and press »oK« to  
<
>
confirm.  
notes:  
5
6
Confirm the new name, select the push  
7
Repeat steps 2 and 3 if you would like to  
change other channels within the same  
favourites list.  
button »submit« with »  
v«, »Λ«, » « or  
<
» « and confirm with »oK«.  
>
Press »menu« to end the seting.  
7
Repeat steps 1 to 3 if you would like to  
change channels in a different favourites list.  
4
5
Exit the current favourites list with »  
(blue).  
– The entire programe table will appear  
again.  
«
  
Quit the program table with »menu«.  
-20  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
notes:  
picture-settings-  
7
You can only select the »Mpeg NR« function  
1
Open the menu with »menu«.  
on digital and AV presets.  
2
Select the menu item »PICTURE SETTINGS«  
»Mpeg NR« reduces any interference from  
artefacts (pixel blocks) from digital pro-  
grammes due to MPEG compression (such  
as from DVB-T receivers or DVD players).  
with »v« or »Λ« and press »oK« to confirm.  
– The »PICTURE SETTINGS« menu appears.  
20.09.2010  
15:46  
PICTURE SETTINGS  
7
The »Film Mode« detects and processes  
feature films automatically for all channel  
sources. This means you will always receive  
an optimal picture.  
This functions in the modi 480i, 576i and  
1080i in TV playback and for other channel  
sources.  
If the »Film mode« is switched on for pro-  
grammes without a feature film signal, minor  
problems such as picture freeze, defective  
subtitles or fine lines in the picture could  
occur.  
The function »Dynamic Contrast« adapts the  
contrast dynamically and optimally for the  
respective picture content.  
With »Dynamic Backlight«, the device opti-  
mally adapts the background lighting to the  
picture content.  
The »Backlight« can only be set manually  
when the function »Dynamic Backlight« is  
deactivated.  
»MEMC« will only appear in menus of LCD  
products with 200 Hz PPR Feature and LED  
products with 400 Hz PPR feature..  
3D Settings  
Basic Tuning  
Picture Mode  
Brightness  
Contrast  
User  
50  
100  
Sharpness  
Colour  
75  
65  
Colour Temperature  
Medium  
7
7
7
7
Enhanced picture settings  
Exit  
Back  
3
Select the line »Picture Mode«, »Bright-  
ness«, »Contrast«, »Sharpness«, »Colour«, or  
»Colour Temperature« with »v« or »Λ«.  
Select the value with » « or » « and press  
<
>
»oK« to confirm.  
notes:  
7
When changing the values with » « or » «,  
<
>
5
Press »menu« to end the setting.  
the screen will be split. You can see the  
current picture value on the left side, the  
new setting on the right side. This feature is  
not supported in 3D mode  
7
In the »PICTURE SETTINGS« menu you can  
also find other additional settings.  
4
Select the line »DNR«, »Mpeg NR«, »Vibrant  
Colour«, »Perfect Clear«, »Film Mode«,  
»Gamma«, »Dynamic Contrast«, »Dynamic  
Backlight«, »Backlight« or »MEMC« with  
»
v« or »Λ«.  
Select the value with » « or » « and press  
<
>
»oK« to confirm.  
-21  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
Automatic-volume  
sound-settings-  
Television stations broadcast at different vol-  
umes. The automatic volume limiting (AVL) func-  
tion means the volume is kept the same when  
you switch between channels.  
1
Open the menu with »menu«.  
2
Select the menu item »SOUND SETTINGS«  
with »v« or »Λ« and press »oK« to confirm.  
– The »SOUND SETTINGS« menu appears.  
1
Select the line »AVL« with »  
v« or »Λ« and  
20.09.2010  
15:46  
select the option »On« with » « or » «.  
<
>
SOUND SETTINGS  
note:  
7
If the »SRS TS HD« setting has been selected  
in the »Audio Mode« line, the AVL line can-  
not be selected.  
Volume  
10  
Balance  
Sound Type  
Sound Mode  
Stereo  
SRS TS HD  
Speech  
stereo/two-channel-sound,-mono  
If the device receives two-channel-sound pro-  
grammes, e.g. a film with the original soundtrack  
on audio channel B (display: »Dual II«) and  
the dubbed version on sound channel A (dis-  
play: »Dual I«), you can select the audio channel  
you prefer.  
SRS Sound Preset  
External  
Headphone  
20  
Audio Output Setup  
Accessibility Settings  
If the device receives stereo or Nicam pro-  
grammes, it switches automatically to stereo  
sound (display: »Stereo«).  
End  
Back  
You can switch the sound to »Mono« if the stereo  
sound quality is poor.  
note:  
1
Select the line »Audio Type« with »  
v« or  
7
Additional operations are explained in the  
following sections.  
»Λ  
« and adjust the setting with » « or » «.  
<
>
stereo-width  
volume  
This broadens the sound output for stereo pro-  
grammes and improves the sound with mono  
reception.  
1
Select the line »Volume« with »  
v
« or »  
>
Λ
«
«
and change the setting with » « or » «.  
<
Balance  
1
1
Select the line »Audio Mode« with »  
or » «.  
v«  
Select the line »Balance« with »  
v
« or »  
>
Λ
Λ
and change the setting with » « or » «.  
<
2
Select the option »Spatial« with » « or » «.  
<
>
-22  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
soundeffects  
equalizer  
This menu offers three preset sound effects  
(Music, Natural and Speech) and one setting to  
be created by you (User).  
Equalizer offers a sound setting ”User” that you  
can create.  
Equaliser appears in the menu when »Sound  
mode« is selected as »Spatial« or »Normal«,  
and »Sound Medium« as »User«.  
1
Select the line »Sound Preset« with »  
v« or  
»
Λ«.  
1
2
Select »Equalizer« with »v« or »Λ« and  
2
Select the sound effect »Music«, »Natural«  
or »Speech« by pressing » « or » «.  
press »oK« to confirm.  
<
>
The »EQUALIZER« menu appears.  
note:  
note:  
7
»User« option is active when »Sound mode«  
setting is selected as »Normal or »Spatial«.  
7
If the »SRS TS HD« setting has been selected  
in the »Sound Mode« line, the »Equalizer«  
line will not indicate.  
srs-trusurround-HD  
SRS TruSurround HD is a patented audio tech-  
nology which is integrated into the television set  
and only requires the built-in speakers to gener-  
ate a Surround Sound effect.  
Select the frequency bandwidth »120Hz«  
with »v« or »Λ«.  
Set the preferred value with » « or » «.  
<
>
3
4
Set the next frequency bandwidth with »  
or » « and repeat the setting.  
v«  
1
2
3
4
Select the line »Sound Mode« with »  
or » «.  
v«  
Λ
Λ
Press » « to save the setting.  
<
Select the option »SRS TS HD« with » « or  
<
Audio-description-(Audio-subtitles)  
» «.  
>
Audio description is an additional audio channel  
for visually-impaired persons. Descriptions are  
provided of activities, surroundings, changes of  
scene, gestures and actors' facial expressions.  
Select the line »SRS Sound Preset« with »  
v«  
or »Λ«.  
Select the sound effect »Music«, »Natural«  
or »Speech« with » « or » «.  
<
>
This audio channel is transmitted simultaneously  
with the normal sound on digital channels. Avail-  
ability depends on the respective channel and  
broadcaster.  
1
Select the line »Audio Description« with »  
v
«
or »Λ  
« and select the option »On« with » «  
<
or » «.  
>
2
Select the line »Volume« with »  
v
« or »  
>
Λ
«
and change the volume with » « or » «.  
<
exiting-the-setting  
1
Press »menu« to end the setting.  
* Under licence from SRS Labs, Inc. TruSurround HD,  
SRS and the  
symbol are trademarks of  
SRS Labs, Inc.  
-23  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
Displaying-information  
Basic-functions  
1- Display information, press »?« repeatedly.  
– The display disappears automatically after  
a short while.  
switching-on-and-off  
1
Press »i-o« on the device, to switch the televi-  
sion in standby mode.  
Freeze-frame  
2
3
Press »8«, »1…0« or »p+« or »p-« to switch  
on the television from standby mode.  
If you wish to view a particular scene for longer,  
you can “freeze” the frame of the current pro-  
gramme.  
Press »8« to switch the television to standby.  
1
2
Activate the freeze-frame function with »$«.  
End the freeze-frame function with »$«.  
note:  
selecting-channels  
1
Press »1…0« to select presets directly.  
2
Select channels step by step with »p+« or  
»p-«.  
7
If an external data medium is connected  
to the television, the time shift function is  
activated with »$«. The time shift function is  
described on page 44.  
3- Open the channel list with »oK«, select the  
preferred television channel with » «, » «,  
» « or » « and press »oK« to confirm.  
v
Λ
<
>
Exit the channel list with »menu«.  
picture-settings  
Various picture settings are available.  
selecting-channels-from-lists  
You can select channels from various lists (e.g.  
all channels, FAV 1 to FAV 4).  
1
2
Open the Tools menu with »tools«.  
Select the menu item »Picture Mode« with  
»v« or »Λ«.  
1
Press »FAv« to open an overview of pro-  
grame tables.  
– The overview is displayed.  
3- Select »User«, »Eco TV«, »Vivid«, »Natural«,  
»Movie«, »Sports« or »Game« by pressing  
» « or » «.  
2
3
4
Select a channel list with »  
Λ« or »v« and  
<
>
– You can change the »User« picture setting;  
see “Picture settings” on page 21.  
open it with »oK«  
.
Select a television channel with »  
v«, »Λ«,  
note:  
» « or » « and press »oK« to confirm.  
<
>
7
Picture setting »Game« can only be selected  
in »HDMI«, »Component« and »PC« modes.  
Press »menu« to exit the channel list.  
selecting-a-preset-Av-channel  
1
Open the »Select Source« menu with »  
Select an AV preset with » «, »  
» « and press »oK« to confirm.  
«.  
2
v
Λ«, » « or  
<
>
3
Use »1…0« to switch back to the television  
channel.  
Adjusting-the-volume  
o
1
Adjust the volume with »  
«.  
- -–  
+
switching-sound-on/off  
1
Press » « to mute the sound or switch it  
p
on again.  
-24  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
Audio-settings  
Various audio settings are available.  
Zoom-function  
This function allows you to enlarge the picture  
as required.  
1
2
Open the Tools menu with »tools«.  
1
2
Open the Tools menu with »tools«.  
Select the menu item »Sound Preset« with  
»v« or »Λ«.  
Select the menu item »Zoom« with »v« or  
»Λ«.  
3
Select the audio setting »User«, »Music«,  
»Natural« or »Speech« by pressing » « or  
3- Press- »oK« repeatedly to enlarge the  
<
» «.  
display in three steps.  
>
– You can change the »User« audio setting  
– see the “Soundeffects” chapter on page  
23.  
note:  
7
Zoom feature is not supported in 3D mode.  
note:  
eco-mode  
This function allows you to reduce the power  
consumption.  
7
»User« option is active when »Sound mode«  
setting is selected as »Normal or »Spatial«.  
Audio-language  
1
2
Open the Tools menu with »tools«.  
Various languages are available on digital tele-  
vision channels. This depends on the programme  
being broadcast.  
Select the menu item »Eco TV« with »v« or  
»Λ«.  
3- Switch on the Eco mode with » « or » «.  
<
>
<
1
2
Open the selection menu with »  
«.  
4
Switch the Eco mode off again with » « or  
Select the language by pressing »  
and press »oK« to confirm.  
v
« or »Λ«  
» «.  
>
subtitles  
Various subtitles are available on digital televi-  
sion channels. This depends on the programme  
being broadcast.  
1
2
Open the selection menu with » «.  
Select the subtitles with »v« or »Λ« and  
press »oK« to confirm.  
note:  
7
Subtitles in terrestrial digital broadcasts are  
not supported in 3D mode.  
-25  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
Zapping-function  
This function remembers the channel you are  
currently watching while you switch over to other  
ones (zapping).  
electronic-tv-guide  
The electronic TV guide provides an overview of  
all programmes that will be broadcast in the next  
week (for digital channels only).  
1
Press »1…0« or »p+«, »p–« to select the  
1
Press »GuiDe« to display channel informa-  
channel to be stored in the zapping memory  
tion.  
and press » « to confirm.  
<
notes:  
7
2
3
Press »1…0« or »  
Λ«, »v« to switch to  
Not all channels supply provide a detailed  
another television channel.  
TV guide.  
7
Many broadcasters transmit the current  
Press » « to switch between the saved tel-  
<
schedule, but do not offer detailed descrip-  
tions.  
evision channel and the last television chan-  
nel viewed.  
7
There are broadcasters which do not pro-  
vide any information at all.  
4- End the function with »menu«.  
2
3
Press »  
v« or »Λ« to select a television  
channel.  
– Today's programmes on the television  
channel selected are displayed.  
Switch to the information about the current  
programme with » «.  
>
notes:  
7
You can open and switch off the extensive  
programme information with »?«.  
7
You can can added the selected broadcast  
to the memory timer by pressing »oK«  
.
4
5
6
Press »  
v
« to select information on the next  
programme and, »  
Λ
« to return to the infor-  
mation for the current programme.  
Select programmes on over the coming days  
with » « (green), and switch back to the cur-  
  
rent day with » « (red).  
Switch back to the channel selection with  
» «.  
<
note:  
7
Filter for certain programmes with »  
«
  
(blue), select the channel type with » «,  
<
» «, »v« or »Λ« and press »oK« to con-  
>
firm. Programmes which match the selected  
channel type are displayed.  
7- Quit the electronic TV guide with »menu«.  
-26  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
»panorama«-format-  
Changing-the-picture-format  
This setting is suitable for films in an especially  
wide format.  
The television automatically switches to the 16:9  
format if this format is detected via the SCART  
socket.  
During programmes in 4:3 format, the picture is  
stretched horizontally if the »Panorama« function  
is selected. The picture geometry is stretched  
horizontally.  
1
2
Open the Tools menu with »tools«.  
Select the menu item »Picture Format« with  
»
v« or »Λ« and press »oK« to confirm.  
3
Select the picture format with » « or » « and  
»overscan-off«-format  
<
>
press »oK« to confirm.  
In this mode, HD pictures are not cropped by the  
HDMI sockets or component sockets, and are  
displayed in their original size. This only applies  
in HDMI mode and for resolutions of 720p or  
above.  
– You can choose between the following  
picture formats:  
»Auto«-format  
The picture format is automatically switched to  
»16:9« for 16:9 programmes.  
note:  
7
Picture format selection is not supported in  
3D mode.  
The picture format is automatically switched to  
»4:3« for 4:3 programmes.  
»16:9«-and-»14:9«-formats  
For programmes in 4:3 format, the picture is  
stretched horizontally if the »16:9« format or  
»14:9« format is selected.  
The picture geometry is stretched horizontally.  
With actual 16:9 input sources (from a set-  
top box on the SCART socket) the picture fills  
the screen completely and with the correct  
geometry.  
»4:3«-format  
The picture is shown in 4:3 format.  
»letterBox«-format-  
The letterbox format is especially suitable for  
programmes in 16:9 format.  
The black borders which are usually at the top  
and bottom of the screen are eliminated, 4:3 pic-  
tures fill the screen.  
The transmitted pictures are enlarged, but are  
slightly cropped at the top and bottom. The pic-  
ture geometry remains unchanged.  
»subtitle«-format  
If you cannot see the subtitles at the bottom of  
the screen, select »Subtitle«.  
-27  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------  
important-information-about-the-  
3D-function  
preparing-the-3D-function  
Your Grundig television and 3D shutter glasses  
can provide the reality of the cinema when you  
watch 3D movies in your home.  
7
Keep a sufficient distance from the television.  
The optimum distance is three times the  
height of the screen. Watching 3D films from  
a close distance for a long time could impair  
your vision.  
This TV uses state-of-the-art LED technology to  
give you the best experience 3D has to offer.  
To join 3D world, you just need to put on the  
Grundig 3D glasses.  
7
Never use the 3D function for longer than  
3 hours without a break.  
notes:  
7
It is essential that you supervise children  
7
Only use the GRUNDIG AS-3D G glasses.  
watching a 3D programme to prevent dam-  
age to their health. Children under 6 years  
should not watch 3D content because their  
spatial vision is not yet completely developed.  
Do not use 3D glasses from other manufac-  
turers.  
7
Grundig AS-3D G glasses are also sold  
separately. Please contact your dealer.  
7
Watching 3D movies with 3D shutter glasses  
7
The infrared transmitter is located at the  
for long durations may cause headaches or  
fatigue. Stop watching if you get a head-  
ache, feel dizzy or generally unwell.  
lower left corner of the television and emits  
the signals at 90° horizontally and 40°  
vertically.  
7
Do not use the 3D function if you are anx-  
ious, sleepy or overtired.  
7
It may not be possible to obtain 3D effects  
when there is an obstacle between the infra-  
red transmitter and the glasses.  
7
If you or a member of your family suffers  
with epilepsy, you should consult your doc-  
tor before watching 3D films.  
7
If, when watching a 3D film, your vision  
becomes impaired, you feel dizzy or nau-  
seous, your eyes hurt, you have muscle  
spasms or have difficulty in concentrating,  
you must stop watching immediately.  
7
3D images can startle the viewer. We rec-  
ommend that elderly persons, pregnant  
women and persons with serious physical  
complaints avoid watching 3D content.  
7
Do not use the 3D glasses for other purpos-  
es, for example as sunglasses or protective  
glasses, as this may impair your sight.  
-28  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------  
note:  
watching-3D-films  
notes:  
7
Frame Packing appears in the 3D menu only  
if a video signal is sent to the »HDmi« input  
in HDMI 1.4 format. The »Side by Side«  
and »Top Bottom« options do not appear.  
7
The 3D function is supported using the »DvB-  
t«, »DvB-C«, »DvB-s« and »DlnA« chan-  
nel sources or external devices connected to  
the »HDmi«, »Ypbpr«, »vGA« or »usB«  
inputs.  
4
Turn off the 3D function by setting it to »Off«  
with »3D« and confirm with »oK«  
.
7
With »HDmi«, »Ypbpr« and »vGA«  
3D-settings  
inputs, 3D mode is only possible with  
resolutions at »1280 x 720p 50/60  
Hz«, »1920 x 1080i 50/60 Hz« and  
»1920 x 1080p 24/30, 50/60 Hz«.  
1
Open the menu with »menu«.  
Select the line »PICTURE SETTINGS« with  
« or » « and confirm with »oK«  
– The »PICTURE SETTINGS« menu appears.  
Select »3D SETTINGS« with » « and  
2
»
v
Λ
.
7
The 3D experience depends on the format  
and features of the movie (resolution,  
sharpness etc.) being played.  
3
Λ
confirm with »oK«  
.
7
If 3D mode is activated for a picture which  
– The »3D SETTINGS« menu is displayed.  
is not in 3D, the picture on the screen may  
appear blurry both with or without the 3D  
glasses.  
dd.mm.yyyy  
hh:mm  
PICTURE SETTINGS  
3D Settings  
7
The 3D effect may degrade if you watch  
3D images under fluorescent light. In such  
cases, either reduce the light or turn off the  
lamp.  
Off  
3D Mode  
3D Effects  
On  
0
Effect mode  
3D Perspective  
Depth  
7
Your TV will switch from 3D mode to 2D  
mode for the following: if the program table  
or EPG information is displayed, the channel  
or the source are changed, playback of a  
3D film is completed or the next film starts to  
play in USB or PVR mode.  
0
3D Options  
Left-Right Correction  
Off  
1
2
Open the »Select Source« menu with »  
«.  
Select the source (digital channel or suitable  
input) that will be played in 3D with » «,  
Exit  
Back  
<
» «, »  
v
« or »  
Λ
« and confirm with »oK«  
.
>
3
Open 3D menu with »3D« button and use  
» «, » « button to select »Side by Side«, »Top  
Bottom« or »2D → 3D« option according to  
the content to be played and confirm with  
note:  
<
>
7
Additional operations are explained in the  
following sections.  
»oK«  
.
– »2D → 3D«: Changes 2D picture to 3D.  
– »Side by Side«: Displays a picture next to  
the other one.  
– »Top Bottom«: Displays a picture below  
the other one.  
– »Frame Packing«: Right and left images of  
the TV are displayed alternately.  
-29  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------  
Adjusting-2D-→-3D-effects  
Formats-supported-by-HDmi-1.4  
When you change 2D broadcasting to 3D, you  
can adjust the most suitable effect depending on  
your personal preferences.  
With HDMI 1.4, your TV can recognise and  
play 3D content.  
The formats supported are shown in the follow-  
ing table.  
1
Select »Effect mode« with »  
v« or »Λ« and  
set it to »On« with » « or » «.  
<
>
Frame Packing 1080p @  
23.98/24Hz  
For-Blu-  
ray-films  
– »3D Perspective« and »Depth« options  
are activated.  
Frame Packing 720p @ 50 or  
59.94/60Hz  
2
3
Select »3D Perspective« with »  
v
« or »  
Λ
«
For-3D-  
games  
and adjust with » « or » «.  
<
>
« or »  
Side by Side  
Horizontal  
1080i @ 50 or  
59.94/60Hz  
Select »Depth« with »  
v
Λ
« and select  
For-3D-  
the picture setting as »Low«, »Medium« or  
»High« with » « or » «.  
films-from-  
broadcas-  
ters  
<
>
Top and  
Bottom  
720p @ 50 or  
59.94/60Hz  
1080p @  
4
Press »menu« to end the setting.  
left---right-Correction  
23.97/24Hz  
When Frame Packing mode is enabled in HDMI  
source, 3D perception may disappear in 3D  
films or 3D games due to a synchronization shift  
arising from HDMI signal. You may correct 3D  
perception with this feature.  
note:  
7
Refer to the user manual of the Grundig AS-  
3D G glasses for further information about  
usage, cleaning and care of the glasses.  
7
»HDmi4« input does not support HDMI1.4.  
1
Select »Left-Right Correction« with »  
«.  
v« or  
»
Λ
2
Press » « or » « to switch the function »On«.  
<
>
note:  
7
Set the function to »Off« with » « or » «.  
<
>
3
Press »menu« to end the setting.  
-30  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
what-is-smart-inter@ctive-tv  
Smart Inter@ctive TV provides your television  
with internet services and pages when con-  
nected to internet.  
wired-network  
wired-network-connection  
1
Connect the output of external modem to the  
»lAn« socket with Cat 5 cable.  
Through Interactive TV feature you can run many  
local and global internet applications. These  
applications include video, picture and music  
applications, social networks, news and sports,  
weather applications and doctor or pharmacy  
search, recipes and viewing traffic congestions  
depending on your local city.  
Also, you can listen to online radio.  
Your TV supports remote control feature for  
Apple iPhones and Android phones. Depending  
on the features of your TV, you may control your  
TV by your phone after downloading the free  
»GRUNDIG TV Remote« application from Apple  
App. Store or Android Market and install it on  
the Apple iPhone/Android phone.  
The availability of the applications and the con-  
tent is dependent on the content provider.  
note:  
7
Connection cables are not supplied.  
network-connection  
You can establish a wired or wireless connection  
between your television and the local network.  
If you want use a wired network connection,  
start with the instructions on this page;  
if you use a wireless network connection, follow  
the instructions in section "Wireless network", on  
page 35.  
-31  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
3
4
5
Select »Connection Type« with »  
v
« or »  
Λ
«
wired-network-settings  
There are two ways of making the wired network  
settings.  
and then select »Wired« with » « or » «.  
<
>
Select »Network Configuration« with »  
v
« or  
»Λ« and then select »AUTO« with » « or » «.  
<
>
A
Automatic wired network connection,  
all connection settings (»IP Address«, »Net-  
mask«, »Gateway« and »DNS«) are ob-  
tained from modem automatically.  
Start the registration to the home network by  
pressing » « (red).  
– The mesage »Connecting ... Please Wait«  
appears.  
B
Manual wired network connection,  
all connection settings (»IP Address«, »Net-  
mask«, »Gateway« and »DNS«) must be  
configured manually.  
6
Press » « (green) to make sure that the  
  
network connection is established with the  
current settings.  
– The messages »Testing ... Please Wait«  
appears, after successfull announcement  
the messages »Connecting To Gateway:  
Success« and »Internet Connection:  
Success«.  
Automatic-wired-network--  
connection  
Most of the home networks are Dynamic. If  
you have a dynamic network, you must use a  
DSL modem that supports DHCP. A Television  
connected to the same network with a Modem  
or IP sharer that support DHCP obtains the  
»DNS« values that are required for »IP Address«,  
»Netmask«, »Gateway« and internet access  
automatically, and thus you are not required to  
enter those values manually.  
7
Press »menu« to end the setting.  
note:  
If you do not have a dynamic network,  
follow the instructions in manual connection  
section.  
7
1
2
Open the menu with »menu«.  
Select the line »INTER@CTIVE TV« with »  
v«  
or »Λ« and press »oK« to confirm.  
– The »INTER@CTIVE TV« menu appears.  
dd.mm.yyyy  
hh:mm  
INTER@CTIVE TV  
OK  
inter@ctive Applications  
Network Settings  
Wired  
Connection Type  
AUTO  
Network Configuration  
IP Address  
10.134.151.15  
10.134.150.8  
255.255.255.0  
DNS  
Netmask  
Gateway  
MAC Address  
10.134.151.254  
E1:DF:BF:92:00:11  
Connect  
Exit  
Test Connection  
Back  
-32  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
7
8
9
Select »Netmask« with »  
Enter the Netmask with »1…0« and press  
« (green) to save the value.  
v« and press »oK«.  
manual-connection  
Certain networks require Static IP address. If your  
network requires a Static IP address, you must  
enter the »IP Address«, »Netmask«, »Gateway«  
and »DNS« values manually. You can obtain  
your »IP Address«, »Netmask«, »Gateway«  
and »DNS« values from your Internet Service  
Provider (ISP).  
»
  
Select »Gateway« with »  
Enter the Gateway with »1…0« and press  
« (green) to save the value.  
v« and press »oK«.  
»
  
Start the registration to the home network by  
pressing » « (red).  
1
2
Open the menu with »menu«.  
– The mesage »Connecting ... Please Wait«  
appears.  
Select the line »INTER@CTIVE TV« with »  
or »Λ« and press »oK« to confirm.  
v
«
10 Press » « (green) to make sure that the  
  
– The »INTER@CTIVE TV« menu appears.  
Select »Connection Type« with » « or »  
and then select »Wired« with » « or » «.  
network connection is established with the  
current settings.  
3
4
v
Λ«  
– The messages »Testing ... Please Wait«  
appears, after successfull announcement  
the messages »Connecting To Gateway:  
Success« and »Internet Connection:  
Success«.  
<
>
Select »Network Configuration« with »  
v
« or  
»
>
Λ« and then select »Manual« with » « or  
<
» «.  
– »IP Address«, »Netmask«, »Gateway« and  
»DNS« options are active.  
11 Press »menu« to end the setting.  
dd.mm.yyyy  
hh:mm  
INTER@CTIVE TV  
OK  
inter@ctive Applications  
Network Settings  
Wired  
Connection Type  
Manual  
Network Configuration  
IP Address  
10.134.151.15  
10.134.150.8  
255.255.255.0  
DNS  
Netmask  
Gateway  
MAC Address  
10.134.151.254  
E1:DF:BF:92:00:11  
Connect  
Exit  
Test Connection  
Back  
5
6
Select»IPAddress«with»v«and press»oK«.  
Enter the IP address with »1…0« and press  
»
« (green) to save the value.  
  
Select »DNS« with »  
EntertheDNSaddresswith»1…0«andpress  
« (green) to save the value.  
v« and press »oK«.  
»
  
-33  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
notes:  
wireless-network-connection  
7
The GRUNDIG Wireless WiFi Adapter sup-  
ports IEEE 802.11 B/G and N communica-  
tion protocols. We recommend you to use  
IEEE 802.11N protocol to obtain the best  
performance in HD video playback.  
7
If you use a modem that supports IEEE 802.  
11B/G, video playback performance may  
be poor when compared to a modem that  
supports IEEE 802.11N since the data  
transfer rate of IEEE 802.11B/G protocol  
is lower.  
7
Please note that video playback performance  
in a DLNA application on a wireless local net-  
work and in a smart Inter@ctive TV applica-  
tion on a network with internet connection de-  
pends on the number of users on the network  
as it is the case in every wireless network.  
1
Television includes a built-in Wireless WiFi  
Adapter to connect it to wireless network.  
7
7
7
It is recommended to switch off the equip-  
ment that are not in use in home network in  
order to avoid unnecessary network traffic.  
note:  
7
Apart from the built-in WiFi adapter on TV,  
external WiFi adapter can be connected to  
Placing the modem or wireless network shar-  
er on an elevated location will increase the  
wireless connection reception strength.  
»usB1« and »usB2-(HDD)« inputs.  
Wireless connection reception strength may  
vary depending on the type of the modem,  
the distance between the modem and televi-  
sion and the distance between the device  
used as a DMS for DLNA application and  
the modem.  
7
Modem must be transmitting its SSID in order  
to establish a wireless connection. Television  
can not connect to a network without SSID.  
-34  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
4
Select »Network Configuration« with »  
v« or  
wireless-network-settings  
There are two ways of making the wireless net-  
work settings.  
»Λ  
« and then select »AUTO« with » « or » «.  
<
>
5
Select »Select Access Point« with »  
v« or  
»Λ  
« and confirm with »oK«  
.
A
Automatic connection,  
– »Select Access Point« menu appears and  
available wireless networks are scanned  
and displayed in the menu  
»Apart from Access Point Selection, all data  
regarding the connection settings (»IP Ad-  
dress«, »Netmask«, »Gateway« and »DNS«)  
are obtained from modem automatically.  
6
7
Select the network that you want to connect  
with »  
v«, »Λ«, » « or » « and confirm with  
<
>
B
Manual connection,  
»oK«  
.
all connection settings (»IP Address«,  
»Netmask«, »Gateway« and »DNS«) must  
be configured manually.  
– Wireless connection password screen is  
displayed.  
Select the required character with »  
v«, »Λ«,  
Automatic-connection  
» « and » « and move to the next character  
<
>
Most of the home networks are Dynamic. If you  
have a dynamic network, you must use a DSL  
modem that supports DHCP. Modems and IP  
sharers that support DHCP obtain the »DNS«  
values that are required for »IP Address«,  
»Netmask«, »Gateway« and internet access  
automatically, and thus you are not required to  
enter those values manually.  
with »oK«  
– Select »ABC« for uppercase and »abc«  
for lower case and confirm with »oK«  
– Select »?@123« for numbers and symbols  
and confirm with »oK«  
– Enter the password, select »Confirm« with  
«, » «, » « or » « and confirm with  
»oK«  
note:  
.
.
.
»v  
Λ
<
>
.
1
2
Open the menu with »menu«.  
7
In WEP encryption system, more than one  
network password can be assigned for the  
network. Your television can only connect to  
network with level 1 password.  
Select the line »INTER@CTIVE TV« with »  
v«  
or »Λ« and press »oK« to confirm.  
– The »INTER@CTIVE TV« menu appears.  
dd.mm.yyyy  
hh:mm  
8
9
Start the registration to the home network by  
INTER@CTIVE TV  
pressing » « (red).  
– The mesage »Connecting ... Please Wait«  
appears.  
OK  
inter@ctive Applications  
Press » « (green) to make sure that the  
  
Network Settings  
network connection is established with the  
current settings.  
– The messages »Testing ... Please Wait«  
appears, after successfull announcement  
the messages »Connecting To Gateway:  
Success« and »Internet Connection:  
Success«.  
Wireless  
Connection Type  
N/A  
Select Access Point  
Network Configuration  
AUTO  
10.134.151.15  
10.134.150.8  
IP Address  
DNS  
255.255.255.0  
10.134.151.254  
Netmask  
Gateway  
10 Press »menu« to end the setting.  
note:  
Connect  
7
If you do not have a dynamic network,  
Exit  
Back  
Test Connection  
follow the instructions in manual connection  
section.  
3
Select »Connection Type« with »  
v« or »Λ«  
and then select »Wireless« with » « or » «.  
<
>
-35  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
7
Select »Network Configuration« with »v« or  
manual-connection  
»
Λ« and then select »Manual« with » « or  
<
Certain networks require Static IP address. If  
your network requires a Static IP address, you  
must enter the »IP Address«, »Netmask«, »Gate-  
way« and »DNS« values manually. You can ob-  
tain your »IP Address«, »Netmask«, »Gateway«  
and »DNS« values from your Internet Service  
Provider (ISP).  
» «. »IP Address«, »Netmask«, »Gateway«  
>
and »DNS« options are active.  
8
9
Select»IPAddress«with»  
Enter the IP address with »1…0« and press  
« (green) to save the value.  
v«andpress»oK«.  
»
  
Select »DNS« with »  
EntertheDNSaddresswith»1…0«andpress  
« (green) to save the value.  
v« and press »oK«.  
1
2
Open the menu with »menu«.  
»
  
10 Select »Netmask« with »  
Enter the Netmask with »1…0« and press  
« (green) to save the value.  
Select the line »INTER@CTIVE TV« with »  
v«  
or »Λ« and press »oK« to confirm.  
v« and press »oK«.  
– The »INTER@CTIVE TV« menu appears.  
»
3
4
Select »Connection Type« with » « or »  
v
Λ«  
>
« or  
  
11 Select »Gateway« with »  
Enter the Gateway with »1…0« and press  
« (green) to save the value.  
and then select »Wireless« with » « or » «.  
<
v« and press »oK«.  
Select »Select Access Point« with »  
v
»Λ« and confirm with »oK«.  
»
  
– »Select Access Point« menu appears and  
available wireless networks are scanned  
and displayed in the menu  
12 Start the registration to the home network by  
pressing » « (red).  
– The mesage »Connecting ... Please Wait«  
appears.  
5
6
Select the network that you want to connect  
with »  
v«, »Λ«, » « or » « and confirm with  
<
>
13 Press » « (green) to make sure that the  
  
»oK«  
.
network connection is established with the  
current settings.  
– Wireless connection password screen is  
displayed.  
– The messages »Testing ... Please Wait«  
appears, after successfull announcement  
the messages »Connecting To Gateway:  
Success« and »Internet Connection:  
Success«.  
Select the required character with »  
v«, »Λ«,  
» « and » « and move to the next character  
<
>
with »oK«  
– Select »ABC« for uppercase and »abc«  
for lower case and confirm with »oK«  
– Select »?@123« for numbers and symbols  
and confirm with »oK«  
– Enter the password, select »Confirm« with  
«, » «, » « or » « and confirm with  
»oK«  
notes:  
.
.
14 Press »menu« to end the setting.  
.
»v  
Λ
<
>
.
7
In WEP encryption system, more than one  
network password can be assigned for the  
network. Your television can only connect to  
network with level 1 password.  
7
For TV to discover the wireless modem on  
the network, the network name should  
support ASCII characters.  
-36  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
selecting-internet-applications  
smart-inter@ctive-tv-internet-  
applications  
Smart Inter@active TV applications provide inter-  
net services to your television. These applications  
are designed according to your television.  
1
Open the menu »SMART inter@ctive TV«  
with »@«.  
With the Smart Inter@active TV feature you can  
access many local and global internet applica-  
tions. These applications include video, picture  
and music applications, social networks, news  
and sports, weather applications and doctor or  
pharmacy search, recipes and viewing traffic  
congestions depending on your local city.  
KATEGORIE  
Selected Application  
All  
A
Aplication information  
A
Social&Fun  
Health&Life  
News&Video  
Press OK to Enter  
Exit  
Back  
KATEGORIE  
You can listen to online radios and access many  
other entertaining information.  
2
Select the application with »v«, »Λ«, » «  
and » « and press »oK« to confirm. The  
<
notes:  
>
7
Availability of Smart Inter@active TV  
applications are dependent on the country.  
selected application will be started.  
notes:  
7
Interactive TV internet applications cannot  
7
You can advise the applications also by  
categories, press » « (blue) and select  
download and save files, cannot upload  
files to a web site and cannot install add-ins  
except Login pages of some applications.  
  
v« or »Λ« the categorie and confirm  
with »  
with »oK«  
.
7
Under no circumstances, Grundig is  
responsible for the content and the quality  
of content offered by the content providers.  
7
If you attempt to start an application without  
wire or wireless adapter connected, the  
related warning is displayed on the screen.  
If your wire or wireless adaptor is connected  
but you cannot receive IP or internet is  
not connected, the applications cannot  
be started. In this case, check Network  
connection settings. See page 31 or  
34.  
7
Grundig has made special agreements  
with the application owners which have a  
limited duration. Application owners may  
update, modify, restrict or entirely remove  
those applications with their own decision.  
Grundig cannot be held responsible for  
such changes.  
7
Grundig reserves the right to make all  
changes such as modifications, restrictions,  
extensions, transfers and removals on  
internet applications provided through your  
Smart Inter@ctive TV.  
7
In Login process of some applications,  
it may be required to connect to the web  
page of the related application. Subject  
web pages may contain links not related to  
Login process. When connecting those links,  
TV may access open web and view contents  
that are not supported by your TV. As you  
are on open web, your TV cannot control  
those unsupported contents or cannot be  
held responsible for them.  
-37  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
smartnter@ctive-browser-main-menu  
1
2
3
Application gallery  
1
Selected applications  
4
2
Description of the  
application  
KATEGORIE  
All  
Selected Application  
4
5
Live picture from the  
current TV channel  
A
Aplication information  
A
Social&Fun  
Health&Life  
News&Video  
Submenü for selecting  
the different categories.  
5
3
Press OK to Enter  
Exit  
KATEGORIE  
Back  
navigation-in-the-main-menu  
playing-and-other-options-in-the-  
applications  
note:  
1
Select the desired application with »  
v«,  
»Λ  
«, » « and » « and press »oK« to con-  
<
>
firm.  
7
Some applications do not support all  
– The main menu of the application appears  
after a short time.  
playing options, and playing options may  
vary among different applications.  
note:  
1
2
3
4
»8« starts playback in the applications.  
»!« pauses playback in the applications.  
»7« stops playback in the applications.  
7
You can advise the applications also by  
categories, press »  
with »  
with »oK«  
« (blue) and select  
  
v« or »Λ« the categorie and confirm  
.
Press »3« or »4« during playback, select  
different speed backwards and forwards.  
2
The further using is dependent of the struc-  
ture from the application. See the notes on  
the screen.  
5
Press »5« or »6« during playback, selects  
the previous or the next section.  
6- Press-»Λ«, »v«, » «, » « to slide the screen  
<
>
up and down, left and right in the virtual key-  
board and applications.  
7- Press-»oK« to confirm the selections in  
virtual keyboard and applications.  
8- Press-»1…0«, » « (red), » « (green),  
  
»
« (yellow), »  
« (blue) to select/  
  
  
enable various functions in the applications.  
9
Press »GuiDe« to end the application.  
-38  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
3
Press »  
« (blue) to discover DMS  
  
playback-the-video,-music-and-  
image-files-with-home-network-  
connection  
devices on home network.  
– DMS devices that are discovered appears  
in the menu.  
With DLNA menu of your television, you can  
easily access Video, music and photo files on  
server; and thanks to DMR feature, you can au-  
tomatically start and stop media playing on de-  
vices with DMC feature.  
note:  
7
If no DMS device appears, check the  
network connection. See page 31 or 34.  
4
Select the desired DMC device with »  
v
«, »  
Λ
.
«,  
» « or » « and display its content with »oK«  
notes:  
<
>
7
You can share your videos, music or  
notes:  
photographs via devices such as a PC,  
Mobile Phone or NAS (Network Attached  
Storage) functioning as a DLNA compatible  
DMS (Digital Media Server).  
7
File and folder structure of the DMS device  
in menu may vary depending on the Digital  
Media Server software in use.  
7
7
Subtitles are not supported on video files  
that are played through the DMS device.  
7
If the DMS device and the television are  
connected to the wireless network at the  
same time, laggings or freezing can arise  
during video playback.  
Only the formats with a DLNA certificate  
(»MPEG_PS_NTSC«,  
»MPEG_PS_PAL«,  
»MPEG_TS_SD_EU« and »MPEG_TS_EU_  
ISO«) are supported from among the video  
files played from DMS device.  
7
TV can also operate with DMS software  
installed in the computer, however, a full  
compatible operation with software without  
DMS certificate is not guaranteed.  
7
7
With high bitrate videos, distortion can be  
seen.  
7
When you are using a PC with Windows  
Folders that appear as unknown in DLNA  
application cannot be played by the TV.  
Installing the codec to your computer can  
solve this problem.  
OS, you can configure the Windows Media  
Player (from version 11) as Digital Media  
Server.  
The required settings are related to the  
software version.  
7
Only the formats with a DLNA certificate  
(»AAC_ADTS_320«, »LPCM«, »MP3«,  
»WMABASE« and »WMAFULL«) are  
supported from among the audio files  
played from DMS device.  
select-the-Digital-media-server  
1
Open the menu »SMART inter@ctive TV«  
with »@«.  
7
Only the formats with a DLNA certificate  
(»JPEG_LRG«, »JPEG_MED« and »JPEG_  
SM«) are supported from among the picture  
files played from DMS device.  
2
Select the option »dlna« with »  
v«, »Λ«,  
» « or » « and confirm with »oK«  
.
<
>
– »dlna« menu is displayed.  
0
Device Found  
Page: 1/1  
Press BLUE key to search DMS device.  
-39  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
smArt-inter@Ctive-tv-AnD-Home-networK-  
start-playback  
vtuner-internet-radio  
1
In the content of the DMC device select the  
Many radio stations broadcast through the inter-  
net. vTuner allows you to access many popular  
radio stations on earth. Thanks to the vTuner  
function of your television, you can display a  
list that contains many radio stations, and select  
and listen to the desired stations based on your  
tastes.  
required folder with »v«, »Λ«, » « or » «  
<
>
and confirm with »oK«  
.
– All titels appears.  
2
3
Select the required title with »  
v
«, »  
Λ
«, » «  
<
or » «.  
>
Start playback with »8«.  
note:  
7
Internet connection is required to use vTuner  
function.  
other-playback-functions  
1
2
3
Press »!« to pause playback.  
1
2
Open the menu »SMART inter@ctive TV«  
Press »8« to resume playback.  
with »@«.  
Press »5« or »6« repeatedly until the  
desired file is reached.  
Select »vTuner« with »  
v
.
«, »  
Λ
«, » « or » «  
<
>
and confirm with »oK«  
– »Internet Radio« menu is displayed.  
4
5
6
Press »7« to stop playback.  
Press » « to return to the DMS list page.  
VTuner  
<
1/6  
Favorites  
Press »GuiDe« to exit the DLNA function.  
Added Stations  
Location  
note:  
Genre  
New Stations  
Most Popular Stations  
7
This playback functions and others you can  
also select with the function menu:  
»FAv« opens/closes playback functions menu;  
»8« starts playback;  
Exit  
Back  
»!« pause playback;  
»7« stop playback;  
3
Select the required category with »  
v
« or  
»
Λ« and display its content with oK«.  
»
»
»
»
3« and »4« search for a passage;  
« select the repeat function;  
« select the playlist;  
– »Select radio station with »v« or »Λ« and  
press »oK« or »8«.  
– Press »7« to end playback.  
« displaying title informations.  
note:  
7
Sequence and the names of files and folders  
in vTuner menu is updated by the vTuner  
server. Thus, it may vary.  
4
5
Press » « to return to the previous catego-  
<
ry.  
Press »GuiDe« to exit the vTuner function.  
-40  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
possible-limitations-when-using-  
an-external-data-medium  
Depending on the broadcaster, you may experi-  
ence various restrictions on some of the functions  
from some television channels.  
information-on-recording-and-  
playing-television-programmes  
Recording and playback of television pro-  
grammes is only possible with digital television  
channels (DVB-S, DVB-T and DVB-C).  
The digital television channels (DVB-S, DVB-T  
and DVB-C) you are able to record and play-  
back also depends on the broadcaster.  
GrunDiG-has-no-influence-on--  
these-restrictions.  
Recording a programme on the external data  
Recording and playback of programmes,  
medium can be disabled by the broadcaster.  
If the message »URI* protected! PVR function  
is blocked« appears on the screen, then re-  
cording or timeshift is restricted (one recording  
possible) or disabled (recording not possible)  
by the broadcaster.  
as well as the time shift function, can only be  
carried out using an external data medium  
(hard drive or USB stick). The data medium  
should have a minimum storage capacity  
of 2 GB.  
* URI = User right information (Copyright in-  
formation).  
Recordings can be made with most data media  
on the market. However, we cannot guarantee  
operation for all data media.  
If you record and save a programme on the  
archive of an external data medium, playback  
can be restricted.  
The broadcaster can allow you to view this  
programme one or more times, but it may only  
be available for a certain period of time.  
If a programme was recorded on an external  
data medium, it can only be played back on  
your television set. The playback of these pro-  
grammes is not possible on other devices.  
If you send your television to be repaired and  
Programmes not suitable for minors will require  
hardware components need to be replaced,  
you might not be able to play the recordings  
again on the repaired television.  
the input of a PIN number immediately before  
recording starts. If this authorisation is not  
given, the recording may not start.  
Reception for SKY broadcasting service is cur-  
rently only possible in Germany with a suitable  
set-top box or suitable CA module.  
Copying a programme from a digital television  
channel onto a video or DVD recorder using  
the »Av- 1« socket (analogue picture/  
sound signal) can also be restricted by the  
broadcaster. Prerequisite is that your device  
supports the copying function.  
Grundig does not accept liability for any loss  
of saved data on an external data medium.  
-41  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
notes:  
Connecting-external-data-media-  
notes:  
7
The »usB1« socket of the television sup-  
plies a maximum power of 500 mA in ac-  
cordance with USB specifications. External  
hard disks which require more power may  
therefore only be connected to the »usB2-  
(HDD)« of the television.  
7
Before connecting the data medium, switch  
the television to standby with . Connect  
»8«  
the device and then switch the television on  
again.  
7
7
Before removing the external data medium,  
the television must be switched to standby,  
so that no data loss occurs.  
7
If you use a network cable for external hard  
disks which have been connected to the  
»usB2-(HDD)« socket of the television, this  
network cable must also be disconnected  
from the power supply when the television is  
switched off.  
Your television features two USB sockets,  
»usB1« and »usB2-(HDD)«.  
»usB2-(HDD)«isusedtoconnectdatamedia,  
which require an additional power supply  
– for example, external hard disks.  
7
External data media may not be disconnect-  
ed from the television while files on the data  
medium are being accessed.  
settings-for-usB-recording  
selecting-the-menu  
1
Open the menu with »menu«.  
2
Select the line »USB RECORDING« with  
»
v« or »Λ« and press »oK« to confirm.  
– The »USB RECORDING« menu appears.  
20.09.2010  
15:46  
USB RECORDING  
OK  
PRnP  
Auto Preview  
On  
1
2
Connect the »usB2-(HDD)« socket of the  
television and the corresponding socket of  
the data medium (external hard disk) using  
a USB cable;  
Manage data medium  
Safely Remove Disk  
Disk  
USB  
C:  
Partition  
or  
Capacity Used  
%3  
1249  
Used (MB)  
insert the USB plug of the USB memory stick  
into the »usB1« socket of the television.  
Total (MB)  
38145  
Remaining SD recording time  
Remaining HD recording time  
1,008 min  
288 min  
Confirm the display »  
(green).  
– The file browser appears.  
« with »  
«
  
Exit  
Back  
-42  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
switching-on-automatic-preview  
testing-the-external-data-medium  
If the automatic preview is switched on, a pre-  
view of the selected file appears in the file  
browser.  
You can subject external data media to a test  
and establish whether they are suitable for the  
chosen functionality.  
1
2
3
Select the line »Auto Preview« with »  
«.  
v« or  
1
2
3
Select the line »Disk« with »v« or »Λ«. If  
»Λ  
several data media are connected, select the  
preferred data medium with » « or » «.  
Switch on the function with » « or » «  
<
>
« or »  
<
>
(»On«).  
Select the line »Partition« with »  
v
Λ«.  
If several partitions are available, select the  
partition you wish to use with » « or » «.  
Press »menu« to end the setting.  
<
>
safely-remove-disk  
1
Select the line »Check Disk« with »  
v
« or  
Select the line »Safely Remove Disk« with  
« or » « and press »oK« to confirm.  
»
Λ« and press »oK« to confirm.  
Information on the data medium is dis-  
played.  
»v  
Λ
note:  
7
The disk can now be removed from the  
socket.  
4
Press »menu« to end the setting.  
selecting-external-data-media  
If several external data media are connected to  
the television, you can select the preferred data  
medium.  
1
2
Select the line »Disk« with »v« or »Λ«  
Select the preferred data medium with » «  
<
or » «.  
>
3
Press »menu« to end the setting.  
selecting-a-partition-on-the-external-  
data-medium  
If the external data medium features several par-  
titions, select the partition you would like to use.  
1
2
Select the line »Partition« with »v« or »Λ«.  
Select the partition you wish to use with » «  
<
or » «.  
>
3
Press »menu« to end the setting.  
-43  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
″pausing”-time-shift--  
programmes  
You can pause the programme you are watch-  
ing. This is a useful function, for example if the  
telephone rings while you are watching a film  
and you do not want to miss anything.  
recording-programmes  
You can record programmes. The data for these  
programmes is recorded on an external data  
medium and this archive is administered via the  
television.  
You need 44 MB till 110 MB of memory  
capacity on the external data medium for  
1 minute recording time.  
A freeze-frame display of the last scene appears  
on the screen and the programme is recorded  
in the time shift memory of the external data  
medium.  
While recording, you can watch another pro-  
gramme from the archive.  
In time shift mode you can record a maximum of  
20 minutes of the current programme.  
You cannot change presets.  
one-touch-programme-recording  
1
Press »!« to pause the current programme.  
– The picture is frozen, the time shift and the  
remaining recording time are displayed.  
1
Select the television channel to be recorded  
with » »1…0« or »p+«, »p–« and press  
»
« to start the recording.  
2
Press »8« to resume the programme.  
– Information on the recording is displayed:  
the recording symbol, the channel name,  
the programme, the recording time and the  
available memory space.  
– After a short time this information disap-  
pears.  
The programme will continue to be  
recorded.  
note:  
7
The following functions are possible when in  
time shift mode:  
– Rewind, press »3« several times accord-  
ing to speed (the picture freezes while  
rewinding);  
– Fast forward, press »4« several times  
according to speed;  
– Select pause with »!«.  
2
3
End the recording with »7«.  
Confirm the display with » « (green);  
  
or  
press » « (red) to continue the recording.  
notes:  
3
Press »7« to quit the time shift function.  
– The message »Live programme« appears,  
and you will see the current programme  
without time shift.  
– The scenes in the “time shift memory” are  
deleted.  
7
After the recording is complete, the record-  
ing will be automatically saved on the exter-  
nal data medium.  
7
The »RECORDED FILES« menu, with the ar-  
chived programmes, can be opened with  
»reC.list«.  
7
If the external data medium is disconnected  
from the USB socket during recording, the  
recording will be stopped automatically  
and will not be saved.  
7
Play your recordings, that you have record-  
ed with your FAT32 formatted HDDs, in USB  
mode.  
-44  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
recording-a-programme-from-the-  
channel-list  
presetting-programmes-to-be-  
recorded  
1
Open the »CHANNEL LIST« with »oK«  
Select a television channel with » «, »  
» « or » « and press »oK« to confirm.  
.
...-using-the-electronic-tv-guide  
You can use data from the electronic TV guide  
for recording.  
2
v
Λ«,  
<
>
3
4
Press »menu« to exit the channel list.  
25 programmes can be preset for the timer  
recording or as a reminder.  
Press » « to start recording.  
– Information on the recording is displayed:  
the recording symbol, the channel name,  
the programme, the recording time and the  
available memory space.  
– After a short time this information disap-  
pears.  
1
Press »GuiDe« to display channel informa-  
tion.  
– The electronic TV guide appears.  
2
3
4
5
Select the preferred channel with »  
v«  
or »Λ«.  
Switch to the information about the current  
5
6
Press »7« to stop recording.  
programme with » «.  
>
Confirm the display with » « (green);  
  
Select the programme of your choice with  
or  
»
v« or »Λ«.  
press » « (red) to continue the recording.  
Confirm the programme with »  
«.  
– The symbol » « appears after the name  
of the programme, and the data has been  
added to the timer.  
note:  
7
If the data for the recording is to be changed,  
use  
»
« (yellow) and  
  
»
« (blue) to  
  
switch to the »SCHEDULED EVENTS«, press  
»
»
«(green),changethedataandsaveitwith  
  
  
« (green)  
.
6
Press »menu« to exit the menu.  
notes:  
7
Before the timer recording begins, a warn-  
ing message appears with a 20-second  
countdown. You can switch over to the pro-  
grammed television channel.  
7
If the timer recording starts during playback,  
playback is not interrupted: Recording takes  
place automatically in the background as  
long as you do not select »Yes« when the  
timer countdown message is shown.  
-45  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
...-by-manual-data-entry  
You can preset up to 25 programmes for timer  
recording.  
editing-recording-data-in-the--  
timer-menu  
You can edit the data for programmed timer  
recordings.  
1
Press »GuiDe« to display channel informa-  
tion.  
– The electronic TV guide appears.  
1
Select the timer menu by pressing »GuiDe«  
   
sion.  
,
»
« (yellow) and « (blue) in succes-  
»
2
3
Open the »MAKE SCHEDULE« menu by  
– The »SCHEDULED EVENTS« menu ap-  
pears.  
pressing » « (yellow) twice.  
  
Select the line »Type« with »v« or »Λ«  
2
3
Select the title of the programme to be  
and select the option »Recording« with » «  
<
changed with »  
v« or »Λ« and activate the  
or » «.  
>
timer position with  
»
« (green).  
  
4
5
Select the line »Channel« with »  
v
« or »  
>
Λ
«
– The input menu is displayed.  
and select the channel with » « or » «.  
<
Select the required option with »  
« and edit the data with »1…0« and  
» « or » «.  
v« or  
Select the line »Mode« with »v« or »Λ« and  
»Λ  
select the preferred mode (»Once«, »Every  
Day« or »Weekly«) with » « or » «.  
<
>
<
>
4- Save the changes with » « (green).  
  
6
7
Select the line »Start« (Start recording) with  
« or » « and enter the date/time with  
»1…0«.  
– The timer has been changed.  
»
v
Λ
5
Press »menu« to close the menu.  
Deleting-recording-data-in-the-timer-  
menu  
You can delete the data for programmed timer  
recordings.  
Select the line »End« (Stop recording) with  
« or » « and enter the date/time with  
»1…0«.  
»v  
Λ
8- Save the data with » « (green).  
  
1
Select the timer menu by pressing »GuiDe«  
   
sion.  
,
– The programme is preset.  
»
« (yellow) and « (blue) in succes-  
»
9
Press »menu« to exit the menu.  
notes:  
Before the timer recording begins, a warn-  
– The »SCHEDULED EVENTS« menu ap-  
pears.  
7
ing message appears with a 20-second  
countdown. You can switch over to the pro-  
grammed television channel.  
2
3
Select the title of the programme to be deleted  
with »  
with  
v« or »  
Λ« and delete the timer position  
»
« (yellow)  
.
  
7
If the timer recording starts during playback,  
Press »menu« to close the menu.  
playback is not interrupted: recording takes  
place automatically in the background as  
long as you do not select »Yes« when the  
timer countdown message is shown.  
-46  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
playback  
The recorded programmes – whether started  
playback-during-a-recording  
During a recording, you can either watch the  
manually or using the timer function – are stored  
programme you are currently recording or watch  
on the external data medium. You can open the  
a different one that you have already recorded.  
archive on the external data medium by pressing  
1
Select the channel to be recorded with  
»1…0« or »p+«, »p–« and press »  
start the recording.  
»reC.list«.  
« to  
selecting-a-programme-from--  
the-archive  
2
Select the »Recorded Event« menu by press-  
ing »reC.list«.  
1
Open the »Recorded Event« menu with  
»reC.list«  
.
3- Select the programme you want with »  
v
« or  
– The menu appears.  
»
Λ
« and press »8« to start playback.  
2
3
Select the programme of your choice with  
The recording continues in the background.  
»
v« or »Λ« and start playback with »8«.  
4
5
Press »7« to end playback.  
Press »7« to end playback.  
– The television switches over to the current  
television channel.  
Press »7« to stop recording.  
Deleting-programmes-in-the-  
recording-list  
You can delete programmes from the record-  
ing list.  
Forward/reverse-picture-search  
1
During playback, select the fast forward  
speed (2x, 4x, 8x, 16x or 32x) with »4«;  
or  
1
2
Open the »Recorded Event« menu with »reC.  
list«  
.
during playback, select the rewind speed  
(2x, 4x, 8x, 16x or 32x) with »3« (the pic-  
ture freezes when rewinding).  
– The menu appears.  
Select the programme to be deleted with  
»
v« or »Λ«.  
repeating-a-scene-(A-B)  
You can mark the starting and ending point of a  
scene. The scene is then repeated continuously.  
3
4
Press »« (blue) to delete the programme.  
Confirm the security query with  
»
«
  
(green)  
.
1
Mark the starting point A by pressing »8« at  
the required scene during playback.  
note:  
This scene is marked as the starting  
point A.  
7
You cannot delete programmes in the  
»Recorded Event« menu which are currently  
being recorded or played back.  
2
Mark the end point B by pressing »8«  
once again at the required scene during  
playback.  
5
Press »menu« to close the menu.  
– This scene is marked as the end point B.  
– The television repeats the programme be-  
tween these two points.  
3
Quit the repeat function with »7«.  
-47  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
image-data  
File-formats  
Your television can display pictures in the formats  
JPEG, PNG and BMP.  
Your television can work with the following file  
formats using the USB sockets:  
JPEG stands for Joint Picture Experts Group.  
It denotes a process for compressing picture files.  
PNG and BMP are process used to save image  
data with no, or very little, losses.  
Picture files can be stored with other types of files  
on one medium.  
These files can be organised into folders and  
subfolders.  
video-data  
Special codecs for video compression and  
decompression provide more memory space  
without compromising the picture quality exces-  
sively.  
Your television plays video files in the formats  
DIVS, XVID, H.264/MPEG-4 AVC (L4.1, 4 ref-  
erence pictures), MPEG-4, MPEG-2, MPEG-1,  
MJPEG and MOV.  
The following file name extensions are also sup-  
ported: AVI, MKV, MP4, TS, MOV, MPG, DAT,  
VOB. These files can also contain audio files  
compressed using MP3, AAC or Dolby Digital©.  
Audio-data  
Your television can play audio data in the for-  
mats MP3, AAC, WMA.  
MP3 is the abbreviation for MPEG-1 Level 3 and  
is based on the MPEG-1 standard, which was  
developed by the MPEG (Motion Picture Expert  
Group).  
AAC stands for Advanced Audio Coding and  
was also developed by MPEG. AAC provides  
better sound quality at an identical data rate.  
WMA (Windows Media Audio) is a compres-  
sion standard for audio data developed by  
Microsoft.  
These formats allow audio files to be recorded  
and played which sound as good as a CD, while  
taking up only a fraction of the memory space.  
File name extensions which are supported: MP3,  
MP2, WMA, M4A, AAC.  
MP3 files can be organised into folders and  
subfolders, as on the computer.  
-48  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
Connecting-external--  
data-media-  
Before connecting the data medium, switch the  
television to standby using »8«. Connect the  
device and then switch the television on again.  
Before removing the external data medium,  
the television set must be switched to standby,  
so that no data loss occurs.  
notes:  
7
The »usB1« socket of the television set  
supplies a maximum power of 500 mA in  
accordance with USB specifications. Exter-  
nal hard disks which require more power  
may therefore only be connected to the  
»usB2-(HDD)« of the television set.  
7
1
2
Connect the »usB2-(HDD)« socket of the  
television and the corresponding socket on  
the data device (external hard drive, digital  
camera, card reader or MP3 player) using a  
USB cable;  
If you use a network cable for external hard  
disks which are connected to the »usB2-  
(HDD)« socket on the television, this net-  
work cable must also be disconnected from  
the power supply when the television is  
switched off.  
or  
7
7
External data media may not be disconnect-  
ed from the television set while files on the  
data medium are being accessed.  
insert the USB plug of the USB memory stick  
into the »usB1« socket of the television set.  
Confirm the display »  
(green)  
– The file browser appears.  
« with  
»
«
  
A bi-directional data transfer as defined for  
ITE (Information Technology Equipment)  
devices in EN 55022/EN 55024 is not  
possible.  
.
7
USB transfer is not in itself an operating  
mode. It is only an additional function.  
-49  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
the-file-browser-  
The file browser displays video, audio and  
picture files stored on external data media.  
settings-in-the-usB-setup-menu  
selecting-the-menu  
1
Press »  
«, use »v«, »Λ«, » « or » « to  
<
>
If an external data medium contains files in  
different formats, you can, when necessary, filter  
out the formats not required.  
select the preset »USB« and press »oK« to  
confirm.  
2
3
Open the menu with »menu«.  
main-menu-of-the-file-browser  
Select the »SOURCE SETUP« menu item with  
»
v« or »Λ« and press »oK« to confirm.  
1
4
3
The »SOURCE SETUP« menu appears.  
note:  
7
Additional functions are explained in the  
following sections.  
VIDEO FILES  
ROOT  
Photo  
Music  
Film  
switching-on-automatic-preview  
If this function is switched on, a preview of the  
selected file then appears in the file browser.  
USB DRIVE  
Used (MB)  
Total (MB)  
%3  
475  
45  
1
Select the line »Auto Preview« with »  
v«  
or »Λ«.  
Use Control  
Buttons  
x1  
Speed  
All  
Repeat  
Now  
Total  
2
Switch on the function with » « or » « (»On«).  
<
>
note:  
6
2
5
7
Viewing mode can not be change while 3D  
mode is active.  
1
2
3
Selected data format.  
Name of the data medium.  
Total number of folders on the data medium.  
3
Press »menu« to end the setting.  
selecting-the-display-mode  
1
Select »View Mode« with »v« or »Λ«.  
4- Preview of the selected file.  
2- Select the preferred option with » « or » «.  
<
>
5- Information on the external data medium.  
3
Press »menu« to end the setting.  
6
Menu navigation.  
setting-the-display-duration-for-  
pictures-in-a-slideshow  
1
Select »Slide Show Interval« with »v« or »Λ«.  
2
Selectthedisplayduration(3, 5, 10 seconds)  
with » « or » «.  
<
>
3
Press »menu« to end the setting.  
-50  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
Divx®-voD  
Basic-playback-functions-  
You must have your device registered in order to  
play the protected video that you will buy from  
DivX®.  
1
Select the data medium by pressing »  
«,  
use » «, » «, » « or » « to select the option  
v
Λ
<
>
»USB« and press »oK« to confirm.  
– The file browser appears.  
1
Select »DivX® VOD« with »  
confirm with »oK«  
– Registration Code appears.  
v« or »Λ« and  
.
2
3
Select the file format (video files, audio files,  
picture files) with » « or » «.  
v
Λ
2
3
device with the registration code.  
Switch to the folder/file list with »oK«.  
note:  
Press »menu« to end the setting.  
7
USB data medium with several partitions is  
connected to the USB sockets, the letter for  
the respective drive (e.g. C) appears behind  
the folder symbol. Select the letter of the  
DivX Certified® to play DivX® and DivX  
Plus™ HD (H.264/MKV) video up to  
1080p HD including premium content.  
drive with »  
confirm.  
v« or »Λ« and press »oK« to  
ABOUT DIVX VIDEO: DivX® is a digital video format created  
by DivX, Inc. This is an official DivX Certified® device that plays  
DivX video. Visit divx.com for more information and software  
tools to convert your files into DivX video.  
4
5
Select the folder or file with »v« or »Λ« and  
press »oK« to open it.  
– A list of subdirectories appears.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® de-  
vice must be registered in order to play purchased DivX Video-  
on-Demand (VOD) movies. To obtain your registration code,  
locate the DivX VOD section in your device USB setup menu.  
Go to vod.divx.com for more information on how to complete  
your registration.  
note:  
7
Switch back to the main folder with » «.  
<
Select the track or picture with »  
and press »8« to start playing.  
You can view information on the film data by  
pressing »?«.  
v« or »Λ«  
– When playing MP3 or WMA data, infor-  
mation on the album, track and singer is  
displayed at the left of the menu.  
– When playing picture files, you can use  
»?« to display information about the reso-  
lution and size.  
– When playing picture data, press »  
?«  
®
twice to enter the DivX Settings menu.  
note:  
7
When playing picture data, the file browser  
7
switches off. Press » « to display the file  
browser again.  
6
Press »!« to pause playback.  
7- Press »8« to resume normal playback.  
7
8
Press » « to end playback.  
The file browser appears.  
-51  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
notes:  
Additional-playback--  
functions  
Depending on the file format, the following  
additional functions are available:  
7
Use »Λ« to select »Up Folder«, when you  
would like to return to the last folder. Use  
»Root« (and then press »oK«) to return to  
the main folder.  
selecting-chapters-on-Divx®-files  
(only video files)  
7
It is possible that files which are actually  
supported do not function correctly in USB  
mode. This is because certain files are not  
recorded with standardised compression  
processes, although they feature the “right”  
file ending.  
1
During playback, select the next chapter  
with » «.  
>
2
During playback, select the previous  
chapter with » «.  
<
7
7
7
If a video file features several audio tracks  
(audio streams), you can switch these over  
dFuring playback in full screen mode with  
» «.  
note:  
7
You can also select chapters by entering the  
chapter number with »1...0«.  
When playing music files, you can use other  
options in the USB mode at the same time.  
This way, you can, for example, enhance a  
slideshow with music.  
selecting-titles-on-Divx®-files  
(only video files)  
1
During playback, select the next title with  
«.  
»Λ  
For films, only subtitles in the .SRT,  
.ASS, .SSA, .SMI format are sup-  
ported. The names of the subtitle and  
film files must be identical. Otherwise,  
no subtitles will be shown.  
2
During playback, select the previous title  
with » «.  
v
playing-selected-titles  
Only the marked tracks are played.  
Subtitle function is only supported in movies  
that you will watch in 3D mode.  
1
Select the titles with »  
»oK« to mark it.  
v« or »  
Λ
« and press  
2
Select the next title with »  
v
« or » « and  
Λ
press »oK« to mark it.  
3
4
Start playback with »8«.  
7
Press » « to end playback.  
note:  
7
To remove the marking, select the title with  
« or » « and press »oK« to remove the  
marking.  
»v  
Λ
-52  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
selecting-a-track-or-picture-in-steps- repeat-functions  
(sKip)  
Options:  
– »One Repeat«: the current track will be  
1
During playback, select the next track/  
picture with »6«.  
repeated.  
– »All Repeat«: all tracks will be repeated.  
2
During playback, select the previous track/  
picture with »5«.  
1
Switch off the repeat function before play-  
back with »tools«.  
– Playback begins with the track or picture  
you selected.  
2
3
Start playback with »8«.  
Deactivate the repeat function with  
»tools«.  
– The display changes to »None Repeat«.  
selecting-a-certain-passage-for-  
playback-  
(video files only)  
1
2
During playback, press »oK«  
Enter the passage (time) with »1-...-0« and  
press » « (green) or »oK« to confirm.  
.
  
Fast-forward  
(for video and audio files only)  
You can select different speeds (2-fold, 4-fold,  
8-fold,16-fold and 32-fold forwards and back-  
wards).  
1
Select the playback speed during playback  
with »3« or »4«.  
2- Press »8« to resume normal playback.  
rotating-pictures-  
(picture files only)  
You can rotate pictures by 90°.  
1
During playback, press » « or « to rotate  
the pictures by 90°.  
<
>
-53  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
teletext-operAtion-----------------------------------------------------------------------------------------------  
enlarging-the-character-height  
If you have difficulty reading the text on the  
screen, you can increase the character height.  
top-text-or-FloF-text-mode  
1
Press »txt« to switch on teletext.  
2
Select teletext pages directly with »1...0«  
1
To enlarge the character height of a teletext  
page, keep pressing »5«.  
or step by step with »v« and »Λ«.  
Return to teletext page 100 with »?«.  
note:  
page-hold  
7
At the bottom of the screen there is an info  
A multiple page may contain several sub-pages,  
which are automatically scrolled by the broad-  
casting station.  
bar with red, green and – depending on the  
channel – yellow and blue panels. Similarly,  
the remote control also features buttons with  
different colours with which these pages can  
be selected.  
1
Stop the automatic scrolling of the sub-pages  
with »3«.  
2- Quit the function with »3«.  
3
4
5
Go back a page with » « (red).  
Go to the next page with » « (green).  
  
opening-a-sub-page-directly  
Select a particular chapter with  
»
«
  
If the selected teletext page contains additional  
pages, the number of the current sub-page and  
the total number of pages are displayed.  
(yellow)  
.
6- Select a particular subject with »  
« (blue).  
  
1- Press » « to open the sub-page function.  
2- Use » « or » « to select the sub-page.  
7
Quit teletext with »txt«.  
<
>
normal-text-mode  
1
3- Quit the function with » «.  
Press »txt« to switch on teletext.  
revealing-answers  
Certain teletext pages contain hidden answers  
or information.  
2
Press »1…0« to select teletext pages directly.  
Return to teletext page 100 with »?«.  
3
4
5
Go back a page with »v«.  
1
Display information with »4«.  
Go to the next page with »Λ«.  
2- Press »4« to conceal the information.  
Quit teletext with »txt«.  
note:  
split-screen  
7
Teletext feature is not supported in 3D mode.  
This functions allows you to display the televi-  
sion channel on the left side, the teletext on the  
right side.  
Additional-functions  
1
Switch the function on with »7«.  
– The television channel and teletext are dis-  
played next to each other.  
skipping-the-waiting-time  
While a page search is progressing, you can  
switch to the TV programme.  
2
Switch the function off with »7«.  
1
Enter the teletext page number with »1…0«  
and then press »6«.  
– As soon as the page is found, the page  
number is displayed.  
2
Press »6« to switch to the teletext page.  
-54  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
interACtive-portAl-(HBBtv)---------------------------------------------------------------  
what-is-Hbbtv?  
The ARD offering includes, for example, a de-  
tailed programme overview, the full offering of  
"Das Erste1Mediathek” as well as graphical re-  
structured teletext with high-definition pictures.  
The ZDF offering includes the "ZDF mediathek"  
and other programme information (as of Septem-  
ber 2011).  
To put it simply, HbbTV provides next-generation  
interactive teletext with modern structured con-  
tent, high-definition pictures and video sequenc-  
es, and interactivity.  
To receive HbbTV, the television must be con-  
nected to the internet.  
ARD is currently offering this new service with its  
"third programmes", as is ZDF.  
The HBBTV Service is only available in some  
countries.  
Das Erste Mediathek  
Alle Mediatheken  
Impressum  
3
4
l 15:11 Uhr 08.08.2011  
Neueste Clips  
Sendungen A - Z  
?Sendung verpasst  
5 / 5  
A
Heute 08.08.2011  
ABC  
5
Alina  
ARD-Mittagsmagazin  
Tagesschau  
Tagesschau  
Tagesschau  
Tagesschau  
01:43  
04:47  
14:00  
14:10  
06.08.11  
.min 18  
ARD-Ratgeber: Auto + Verkehr  
ARD-Ratgeber: Bauen + Wohnen  
ARD-Ratgeber: Geld  
nachtmagazin  
ARD-Ratgeber: Gesundheit  
ARD-Ratgeber: Heim + Garten  
ARD-Ratgeber: Recht  
aus:Nachtmagazin  
ARD-Ratgeber: Reise  
ARD-Sondersendung  
Ausblenden  
0
Hilfe  
1
Ausblenden  
Programm  
Mediathek  
Videotext  
2- Select your required subject area with »  
«
  
Hbbtv-operation  
When you switch to a TV programme that sup-  
ports HbbTV, an information message is dis-  
played if HbbTV is available.  
(green), » « (yellow) or »  
  
« (blue).  
  
3- In your selected subject area, choose the re-  
quired option using »  
v
«, »  
Λ«  
,
» « or » «  
<
>
and confirm with »oK«  
.
1
Switch on HbbTV with » « (red).  
4- Switch on HbbTV with » « (red).  
– Information about the service is displayed  
on the screen. In addition, the coloured  
keys required for navigation are also dis-  
played.  
Additional-functions-for-video-  
sequences  
1- Start playback with »8«  
.
note:  
2- Pause playback with »!«.  
7
The range of subject areas and the selection  
of the individual subject areas is dependent  
on the each programme provider.  
3- Continue playback with »8«.  
4- Rewind with »3« or forward with »4«.  
7
The number buttons »1« to »0« are used for  
additional functions.  
7
5- Stop playback with » «.  
-55  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
Changing-the-audio-language  
(only for digital television channels)  
opening-the-settinGs-menu  
1
Open the menu with »menu«.  
You can define a primary and a secondary  
audio language.  
2
Select the »SETTINGS« menu with »v« or  
»
Λ« and press »oK« to confirm.  
– The »SETTINGS« menu appears.  
1
Select the line »Audio« with »v« or »Λ« and  
press »oK« to confirm.  
20.09.2010  
15:46  
The »Select Audio Language« menu  
SETTINGS  
appears.  
2
Select the audio language with » «, » «,  
<
>
Language settings  
»v« or »  
Λ« and then use » « (red) to set  
it as the primary audio language, or use  
English  
English  
Menu  
»
« (green) to set it as the secondary audio  
  
Audio  
Subtitle  
language.  
English  
Off  
– The primary and secondary language is  
display at the top right in the menu.  
Subtitle Mode  
Date and time settings  
3
Press »menu« to end the setting.  
Date & Time  
Changing-the-subtitle-language-  
and-subtitle-mode  
(only for digital television channels)  
Time Adjustment  
Time Zone  
Auto  
GMT +1  
You can switch the subtitles on and off, select the  
subtitle language and allocate a second subtitle  
language.  
Exit  
Back  
note:  
1
Select the line »Subtitle« with »v« or »Λ«  
and press »oK« to confirm.  
7
Additional operations are explained in the  
following sections.  
– The »Select Subtitle Language« menu ap-  
pears.  
language-settings  
2
Select the subtitle language with »  
v«,  
»Λ  
«, » « or » «, then use » « (red) to set  
<
>
Changing-the-menu-language  
it as the primary subtitle language, or use  
  
1
Select the line »Menu« with »v« or »Λ« and  
»
« (green) to set it as the secondary subti-  
press »oK« to confirm.  
tle language.  
The »Select Menu Language« menu  
appears.  
– The primary and secondary language is  
displayed at the top right in the menu.  
2- Select the menu language with » «, » «,  
<
>
3
4
To go back one menu level, press » «.  
<
»v« or »Λ« and press »oK« to confirm.  
Select the line »Subtitle Mode« with »v« or  
3
Press »menu« to finish the setting.  
»
Λ« and then set the preferred option »Off«,  
»Hard of Hearing« or »Basic« with » « or  
<
» «.  
>
5
Press »menu« to end the setting.  
-56  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
setting-the-date-and-time  
Automatic-setting  
Your television set detects the difference in time to  
Greenwich Mean Time (GMT) automatically, as  
long as the channel selected transmits a time signal.  
timer-settings  
entering-the-switch-off-time--  
(sleep-timer)  
In the »Sleep Timer« menu you can enter a time  
for the television to switch off. After this time  
has elapsed, the television switches to standby  
mode.  
1
Select the line »Date & Time« with »  
« and press »oK« to confirm.  
v
« or  
»
Λ
1
Select the line »Sleep Timer« with »  
»Λ«.  
v« or  
2
Select the line »Auto« with »v« or »Λ  
« and  
press »oK« to confirm.  
– Date and Time will be updated automatically;  
2
Enter the switch-off time with » « or » «.  
<
>
or  
note:  
7
To switch off the function, use » « or » « to  
set the switch-off time to »Off«.  
<
>
3
Select the input box with »v« or »Λ«, enter  
the data for Date and Time with »1...0«  
and press »oK« to confirm.  
3
Press »menu« to end the set-up.  
manual-setting  
switch-on-timer  
You can also set the difference in time manually  
– for example, when the correct time is not de-  
tected automatically or does not correspond to  
local time for other reasons  
In the »Auto On« menu you can enter a switch-on  
time for the television. After the preset time has  
elapsed, the television switches on from standby  
– at the preselected volume and the preselected  
television channel.  
1
2
Select the line »Time Adjustment« with »v«,  
then select the option »Manual« with » «  
1
Select the line »Auto On« with  
»v  
« or »  
Λ«  
<
or » «.  
and press »oK« to confirm  
.
>
– The lines »Time Zone« and »Daylight Sav-  
ing« are active.  
2
Select the line »Mode« with  
»
v
« or » and  
Λ«  
use » « or » « to select when the television  
<
>
Select the line »Time Zone« with »v« and  
should switch on.  
press »oK« to confirm.  
3
4
Select the line »Input Source« with  
»v« or »Λ«  
– The »Select Time Zone« menu appears.  
and use » « or » « to select the input source.  
<
>
3- Select the appropriate time zone with » «,  
<
Select the line »Service Type« with  
»v« or »Λ«  
» «, »  
v
« or »  
Λ
« and press »oK« to con-  
>
and use » « or » « to select the preferred op-  
<
>
firm.  
tion (ATV, DTV, Radio or DATA).  
Select the line »Channel« with  
4
5
Select the line »Daylight Saving« with »  
v«  
5
»v« or »Λ«  
and use » « or » « to set the option »Auto«,  
<
>
and use » « or » « to select the preferred  
<
>
»Off« or »On«.  
channel.  
Press »menu« to finish the setting.  
note:  
note:  
7
The line »Channel« is only active when the in-  
put signal currently in use has been set. If no  
entry has been made, then the first channel of  
the selected input source will be used.  
7
If the option »Auto« is selected in the line  
»Time Adjustment«, the television set auto-  
matically adapts the time to the time signal  
from the respective broadcaster. However,  
different channels may also use time bases  
which are different to those of your country;  
e.g. foreign broadcasters. In these cases,  
reminders and planned recordings may be  
annulled due to the time difference.  
-57  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
6
Select the line »Volume« with  
»
v
« or »  
Λ
«
and  
parental-control-settings  
Authorising-programmes  
There are films which may be wholly or partially  
unsuitable for children.  
use » « or » « to set the volume.  
<
>
7
Select the line »Set Hour« with  
»
v« or »Λ«  
and enter the time with »1…0«.  
8- Save the data with » « (green).  
  
These programmes contain information which  
marks the content or scenes with access levels of  
4 to 18. You can select one of the access levels,  
thereby authorising playback.  
note:  
7
You can abort the entry by pressing » « (red)  
.
9
Press »menu« to end the setting.  
1
Select the line »Parental Guidance« with  
« or » « and press »oK« to confirm.  
switch-off-timer  
»v  
Λ
In the »Auto Off« menu, you can enter a time  
for the television to switch off. After this time  
has elapsed, the television switches to standby  
mode.  
2
3
4
Enter the PIN code »1234« with »1-...-0«.  
Select the access level with » « or » «.  
<
>
Press »menu« to end the setting.  
1
2
3
Select the line »Auto Off« with  
»
v
« or »  
Λ«  
locking-menus  
and press »oK« to confirm  
.
This function allows you to lock the »Automatic  
Channel Search«, »Digital Manual Tuning«, »An-  
alogue Manual Tuning« and »Program Table«  
menus so that they can be only accessed by  
entering a PIN code.  
Select the line »Mode« with  
»
v
« or » and  
Λ«  
use » « or » « to set the preferred mode.  
<
>
Select the line »Set Hour« with  
»v« or »Λ«  
and enter the time with »1…0«.  
4- Save the data with » « (green).  
  
1
2
3
Select »Menu Lock« with »v« or »Λ«.  
note:  
Enter the PIN code »1234« with »1-...-0«.  
7
You can abort the entry by pressing » «  
(red).  
Activate the lock with » « or » « (»On«).  
<
>
note:  
5
Press »menu« to end the setting.  
7
To switch off the menu lock, use » « or » «  
to select the setting (»Off«).  
<
>
Automatic-switch-off-(Auto-sleep)  
If this function is activated, the television switches  
automatically to standby after 5 minutes if no  
video signal is broadcast or in accordance with  
the according to European regulations, the tel-  
evision switches automatically to standby after 4  
hours provided that none of the buttons on the  
remote control or on the television is operated  
during this period.  
4
Press »menu« to end the setting.  
locking-keys-(parental-lock)  
When the key lock is activated, the buttons on  
the television set do not function.  
1
Select the line »Keypad Lock« with »  
«.  
v« or  
»Λ  
2
Enter the PIN code »1234« with »1-...-0«.  
1
Select the line »Auto Sleep« with »  
v« or  
3- Activate (On) or deactivate (Off) the key lock  
»Λ«.  
with » « or » «.  
<
>
2
Activate the function with » « or » «  
<
>
4
Press »menu« to end the setting.  
(»On«).  
note:  
7
To switch off the function, use » « or » « to  
<
>
select the setting »Off«.  
3
Press »menu« to end the setting.  
-58  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
Changing-the-pin-code  
updating-software-(oAD)  
You can also enter a personal PIN code instead  
of the default code »1234«. Please take note of  
your own PIN code.  
(from satellite, for digital channels only)  
1
In the »SETTINGS« menu, select the line  
»Check For OAD Updates updates« with  
»v« or »Λ« and press »oK« to confirm.  
1
2
3
4
5
Select »Set PIN« with »v« or »Λ« and press  
»oK« to confirm.  
– A search for new software will be made  
and – if available – it will be installed.  
Enter the current PIN code 1 2 3 4 with  
»1-...-0«.  
note:  
7
If a search for software updates should be  
Enter your new four digit PIN code with  
»1-...-0«.  
made automatically, select the line »Auto-  
matic OAD Update« with »v« or »Λ« and  
Enter your new four digit PIN code with  
»1-...-0« again.  
use » « or » « to select the option »On«.  
<
>
– The software will be updated automati-  
cally as far as possible.  
Press »menu« to end the setting.  
2
Press »menu« to end the setting.  
locking-television-channels-  
You can lock individual television channels, for  
example channels unsuitable for children, using  
a personal PIN code.  
updating-software-(online)  
(from the internet, for digital channels only)  
1
In the »SETTINGS« menu, select the line  
»Check For Online Updates updates« with  
1
2
Open the menu with »menu«.  
Select the »SOURCE SETUP« menu with »  
or »Λ« and press »oK« to confirm.  
v«  
»
v« or »Λ« and press »oK« to confirm.  
– A search for new software will be made  
and – if available – it will be installed.  
3
Select the line »Program Table« with »  
v« or  
»Λ« and press »oK« to confirm.  
note:  
– The »PROGRAM TABLE« menu is dis-  
played.  
7
If a search for software updates should be  
made automatically, select the line »Auto-  
4
5
6
7
In the »PROGRAM TABLE« menu, switch  
matic Online Update« with »v« or »Λ« and  
over to the list view with » « (yellow).  
  
use » « or » « to select the option »On«.  
<
>
– The software will be updated automati-  
cally as far as possible.  
Select the channel to be locked with »  
or »Λ«.  
v«  
2
Press »menu« to end the setting.  
Select the column »Lock« with » « or » «  
and press »oK« to lock the channel.  
<
>
restoring-the-television-to-the-  
default-settings  
Enter the PIN code »1234« with »1-...-0«.  
– The channel is marked using »«.  
This function allows you to delete the channel  
lists and all custom settings.  
note:  
7
To remove the lock, select the channel again  
1
2
3
In the »SETTINGS« menu, select the line  
with »v« or »Λ«, press »oK« to confirm  
»Restore Factory Defaults« with »v« or »Λ«  
and then enter the PIN code 1 2 3 4 using  
and press »oK« to confirm.  
»1-...-0«.  
Press » « (green) to confirm the warning  
  
8
Press »menu« to end the setting.  
message.  
– The »Source Setup« menu appears.  
Continue the settings with the chapter “Initial  
set-up and tuning television channels” on  
page 14.  
-59  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
searching-for-and-activating--  
external-devices  
You can connect up to 11 devices with DIGI LINK  
functions to your television.  
DiGi-linK  
Your television is equipped with  
the DIGI LINK function.  
This function uses the CEC  
(Consumer Electronics Control)  
protocol.  
1
2
Open the Tools menu with »tools«.  
Select the menu item »CEC« with »v« or  
CEC allows external devices which are connect-  
ed to the »HDmi« sockets by an HDMI cable  
(e.g. DVD player) to be operated with a remote  
control.  
Prerequisite is that the devices connected support  
CEC. Read the operating manual for the external  
device to find out how to activate the correspond-  
ing function.  
»
Λ« and press »oK« to confirm.  
– The »HDMI CEC Device List« appears.  
2
Start the device search with » « (red).  
The devices found are displayed in the  
menu.  
3- Select the device for operation with »  
v«,  
»
Λ
«, » « or » « and press »oK« to mark it.  
<
>
– If the selected device is connected to a  
different input to the current one, a switch  
to the respective input will occur auto-  
matically.  
the-DiGi-linK-functions-on-your-  
television  
switching-on-the-television--  
automatically-from-standby  
4
Press »menu« to end the setting.  
If the »Autom. switch-on TV« function is activated  
(»On«), then once the external device (e.g.  
DVD player) is switched on, the television also  
switches on and the appropriate HDMI preset is  
selected.  
Automatic-selection-of-the-HDmi-  
preset-on-the-television  
If your television is switched on and you then  
switch on the external device (e.g. DVD player),  
the appropriate HDMI preset on the television  
will be selected.  
selecting-the-menu-language  
The television menu language is automatically  
selected on the external device (e.g. DVD player).  
The external device must support this function.  
switching-off-the-external-device-  
automatically  
If you switch your television to standby, the ex-  
ternal device (if it is switched on) will also be  
switched to standby.  
DIGI LINK is always active on your television set.  
-60  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
switching-the-device-to-standby  
This option switches the external device to  
standby.  
Device-operation  
You can decide whether external devices should  
react to your television's remote control.  
1
Press »  
«, use »v«, »Λ«, » « or » « to  
1
Press »  
«, use »v«, »Λ«, » « or » « to  
<
>
<
>
select the preset »HDMI1« to »HDMI4« and  
press »oK« to confirm.  
select the preset »HDMI1« to »HDMI4« and  
press »oK« to confirm.  
2
3
Open the menu with »menu«.  
2
3
Open the menu with »menu«.  
Select the menu item »SOURCE SETUP« with  
Select the menu item »SOURCE SETUP« with  
»
v« or »Λ« and press »oK« to confirm.  
»
v« or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
– The »SOURCE SETUP« menu appears.  
4
Select »Device Standby« with »v« or »Λ«  
20.09.2010  
15:46  
and press »oK« to confirm.  
SOURCE SETUP  
– The external device switches itself off.  
Source  
HDMI1  
DIGILINK  
GRUNDIG DVD  
RC Passthrough  
Device Selection  
Remote Control  
Device Standby  
Exit  
Back  
4
Select the line »Remote Control« with »  
or » «.  
v«  
Λ
5- Select the type of operation (»RC Pass-  
through«, »Deck« or »Tuner« with » « or  
<
» «.  
>
notes:  
7
»RC Passthrough« can be used for all devices.  
»Deck« and »Tuner« can be selected in ac-  
cordance with the external device which  
has been connected.  
7
Try out which type of remote control opera-  
tion the external device reacts to the best.  
7
Read about the scope of functions of the  
DIGILINK-compatible device in the respec-  
tive operating manual.  
6
Press »menu« to end the setting.  
-61  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
High-definition--HD-ready  
Connection-options  
7
Which television socket(s) you connect your  
Connect the corre-  
external devices to depends on the sockets  
the external device is equipped with and the  
signals which are available.  
sponding input sources  
(e.g. HDTV receiver or  
HD-DVD player) to the  
»HDmi« sockets (for  
digital HDTV sources).  
7
Please note: With many external devices,  
the resolution of the video signal must be  
adjusted to the input sockets of the television  
(see the operating manual of the external  
device). You can find out which values you  
need to set by referring to the guidelines in  
the sections about the various connection  
options.  
This ensures that you can view digital HDTV  
programmes, even if they are copy-protected  
(HDCP High Bandwidth Digital Content Protec-  
tion), without encountering problems.  
7
Do not connect any other equipment while  
the device is switched on. Also switch off the  
other equipment before connecting it.  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
-62  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
...-using-the-sCArt-socket--  
(CvBs/rGB-signal)  
Connecting-external-devices  
...-with-digital-audio/video-signals  
7
Suitable devices: Digital satellite receiver,  
7
Suitable devices: Digital satellite receivers,  
DVD player/recorder, set-top box, games con-  
sole, video recorder, decoder.  
Playstation, BluRay player, DVD player/  
recorder, set-top box, notebook, PCs.  
7
Video signal: CVBS/RGB.  
7
Video signal: Digital video; resolution: stand-  
7
Audio signal: stereo, analogue.  
ard 576p; HDTV 720p, 1080i, 1080p.  
7
»AV1« preset.  
7
Audio signal: digital audio (stereo, multi-chan-  
nel compression, uncompressed).  
1
Connect the »Av1/s-vHs« socket on the  
television and the corresponding socket on  
the external device using a SCART cable  
(video and audio signal).  
7
Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or  
»HDMI4«.  
1
Connectthe»HDmi1«,»HDmi2«,»HDmi3«  
or »HDmi4« socket on the television and the  
corresponding HDMI socket on the external  
device using a standard HDMI cable (digital  
video and audio signal).  
Activating-a-decoder  
If a decoder is connected to the »Av1/s-vHs«  
socket, this must be activated to provide an  
unencrypted video/audio signal.  
1
2
Open the menu with »menu«.  
...-with-analogue-video-signal-  
(progressive)  
Select »SETTINGS« with »v« or »Λ« and  
press »oK« to confirm.  
– The »SETTINGS« menu appears.  
7
Suitable devices: DVD recorders/players,  
games consoles.  
3
4
Select the »Decoder« with »  
v« or »Λ«.  
7
Video signal: YUV; resolution: standard 576p;  
HDTV 720p, 1080i, 1080p.  
Activate the function with » « or » «  
(»On«).  
Press »menu« to end the setting.  
<
>
7
Audio signal: stereo, analogue.  
7
5
»Component« preset.  
1
2
Connect the »Component- Y- pb- pr«  
sockets on the television to the correspond-  
ing sockets of the external device with RCA  
cables (video signal).  
...-with-s-video-signal  
7
Suitable devices: DVD player/recorder, video  
recorder, camera recorder, notebook, PC.  
7
7
7
Video signal: Y/C.  
Connect the »Component-l-r« sockets  
on the television to the corresponding sock-  
ets of the external device with RCA cables  
(audio signal).  
Audio signal: stereo, analogue.  
»S-VHS« preset.  
1- Connect the » Av1/s-vHs« socket on the  
television and the corresponding socket on  
the external device using an EURO/AV ca-  
ble (video and audio signal).  
-63  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
...-with-an-analogue-tv-signal  
Changing-the-headphone-volume  
7
1
Open the menu with »menu«.  
Suitable devices: Digital satellite receiver,  
DVD player/recorder, set-top box, camera  
recorder.  
2
Select the menu item »SOUND SETTINGS«  
with »v« or »Λ« and press »oK« to confirm.  
7
Video signal: CVBS.  
– The »SOUND SETTINGS« menu appears.  
Select the line »Headphone« with » « or  
«.  
7
Audio signal: stereo, analogue.  
4
v
»Λ  
7
»AV2« preset.  
5
6
Set the preferred volume with » « and » «.  
1
2
Connect the »video« socket on the  
television to the corresponding socket of the  
external device with an RCA cable (video  
signal).  
<
>
Press »menu« to end the setting.  
note:  
7
Prolonged listening with headphones at loud  
volumes can damage your hearing.  
Connect the »l--r« sockets on the television  
to the corresponding sockets of the external  
device with RCA cables (audio signal).  
Hi-fi-system  
note:  
Connecting-digital-multi-channel-  
amplifier/Av-receiver  
With this connection, you can playback the  
audio signal of the television channel via the  
HDMI cable sur the multi-channel amplifier or  
the AV receiver.  
7
There must not be a video signal at the »Av2«  
and »Av1/s-vHs« socket at the same time.  
This could lead to picture disturbances.  
using-a-DvD-player,-  
DvD--recorder,-video-recorder--  
or-set-top-box  
1- Connect the »HDmi2-(ArC)« (HDMI 1.4  
Audio Return Channel) socket to the relevant  
socket on the HDMI ARC compliant Digital  
multichannel amplifier / AV receiver with a  
standard HDMI cable (digital audio signal);  
1
Switch on the external device and select the  
function you wish to use.  
2
Press  
»
«, use »v«, »Λ«, » « or » « to  
<
>
select the preset for the input signal (»AV1«,  
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,  
»HDMI3«, »HDMI4« or »Component«)  
and press »oK« to confirm.  
or  
2- Connect the »optic-out« socket on the  
television to the corresponding socket on the  
AV receiver using a standard optic digital  
cable (digital audio signal).  
Headphones  
important:  
Connecting-the-headphones  
1
7
Do not use a HDMI cable longer than 5 m  
for HDMI ARC connection.  
Plug the headphone jack (3.5 mm ø jack  
plug) into the headphone socket on the tel-  
evision.  
Apply-the-device--with-HDmi-ArC-  
function-and-activate-HDmi-ArC  
1
Switch on the the multi-channel amplifier  
or the AV receiver. If a Blu-ray Player is  
connected on the AV receiver, the player  
must be switched on, too.  
2
Open the Tools menu with »tools«  
button.  
-64  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
3
Select the menu item »CEC« with »  
« and confirm with »oK«.  
– The »HDMI CEC Device List« appears.  
v« or  
playing-the-audio-signal-via-the--  
HiFi-system  
1- Connect the »AuDio-out-l-r« sockets on  
the television to the corresponding socket of  
the AV receiver with an RCA cable (digital  
audio signal).  
»
Λ
4
Start device search with » « (red) button.  
– Audio device connected to the »HDmi2-  
(ArC)« source shall be displayed in the  
list.  
note:  
7
notes:  
If this function is not activated, the audio sig-  
7
nal is transmitted to the HiFi system/AV re-  
If the audio system also has a playing  
function (e.g. Home theater system, DVD  
player), two devices will be listed on the  
HDMI CEC list. The first one is the player,  
and the second one is the audio playback.  
ceiver (connected to »AuDio-out-l-r«).  
1
2
Open the menu with »menu«.  
Select the menu item »SOUND SETTINGS«  
with »v« or »Λ« and press »oK« to confirm.  
7
If a Blu-ray Player is connected to the AV  
receiver, please remove the Disc from the  
Player during the registration.  
– The »SOUND SETTINGS« menu appears.  
3
4
5
Select »Audio Output Setup« with » « or  
v
»
Λ« and press »oK« to confirm.  
5
Press »menu« button to exit the HDMI  
CEC device list.  
– The menu appears.  
Select the line »Audio Out« with »v« or »Λ«  
6
7
Open the menu with »menu« button.  
and press » « or » « to activate the audio  
<
>
output (»Line Out«).  
Select the line » Audio Out Status« with »  
or » « and select the option »Fixed« or »Ad-  
justable« with » « or » «.  
Select the menu item »SOUND SETTINGS«  
with »  
v
« or »  
Λ
« and confirm with »oK«.  
v«  
– The menu appears.  
Λ
<
>
8
9
Select the line »Audio Output Setup« with  
notes:  
»
v« or »Λ« and confirm with »oK«.  
7
If you select »Adjustable«, the volume can  
be changed in the menu option » Audio Out  
Volume«.  
– The menu appears.  
Select the line »ARC« with  
v« or »Λ«.  
10 Select the setting »On« with » « or » «.  
<
>
7
If the audio should only be output via the  
HiFi system/AV receiver, select the option  
notes:  
»Off« in the line »TV Speaker with » « or  
7
The internal speakers of the television are  
switching off automaticaly.  
<
» «.  
>
6
Press »menu« to end the setting.  
7
7
For switching off the HDMI ARC function  
select »Off« with » « or » «.  
<
>
The ARC function will be deactivated while  
switching off the television and the internal  
speakers are active again.  
11 Press »menu« to end the setting.  
“Dolby” and the double-D logo are trademarks of  
Dolby Laboratories.  
Manufactured under licence from Dolby Laboratories.  
-65  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-As-A-pC-monitor-----------------------------------------------------------  
Connecting-a-pC  
20.09.2010  
15:46  
SOURCE SETUP  
1
Connect the »pC-in« socket on the television  
to the corresponding socket on the PC using  
a VGA cable (video signal).  
Source  
PC  
2
Connect the »Audio« socket on the televi-  
sion to the corresponding socket on the PC  
using a suitable cable (audio signal).  
Auto Ajust  
Extended settings  
Auto Ajust Mode  
On  
50H - 50V  
0
note:  
7
Position  
Size  
Adjust your PC to the monitor (for example,  
picture resolution 1280 x 768, picture fre-  
quency 60 Hz).  
Phase  
30  
selecting-presets-for-the-pC  
Exit  
Back  
1
Press »  
« and use »v«, »Λ«, » « or » «  
<
>
to select the preset »PC« and press »oK« to  
confirm.  
Options:  
settings-for-pC-mode  
»Auto Ajust« for automatic PC configura-  
tion.  
1
Open the menu with »menu«.  
– »Auto Ajust Mode«, select the option  
»On« if the configuration should be imple-  
mented automatically in PC mode.  
– »Position« to configure the horizontal and  
vertical picture position.  
– »Size« to set the cycle frequency.  
– »Phase« to eliminate flicker, unfocused  
pictures or horizontal interference.  
2
Select the »SOURCE SETUP« menu item with  
»
v« or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3- Select the function or setting with » « or  
« or » «, » « to  
v
»
Λ«, and then use »v«, »Λ  
<
>
implement it.  
4
Press »menu« to end the setting.  
-66  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-witH-A-Common-interFACe-------------------  
what-is-a-Common-interface?  
Access-control-for-Ci-module-and-  
smart-card  
7
Common Interface (CI) is an interface for  
DVB receivers.  
Encrypted channels can only be viewed  
1
Open the menu with »menu«.  
7
2
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
with a CA module suitable for the encryp-  
tion system and in conjunction with the  
corresponding smart card.  
The television set is equipped with a Com-  
mon Interface slot into which CI modules  
from various providers can be inserted.  
You can insert the provider’s smart card into  
the CA module in order to enable the en-  
crypted channels you wish to view.  
– The »SOURCE SETUP« menu appears.  
Select the line »CA-Module« with » « or  
« and press »oK« to confirm.  
7
3
v
»
Λ
notes:  
7
7
This menu provides operating instructions  
and – after you enter your PIN code – ac-  
cess to the PAY-TV provider's channels.  
inserting-the-CA-module  
note:  
7
7
The remaining settings are described in the  
operating manuals for your CI module and  
smart card.  
7
Switch the device off before you insert a CA  
module into the »Ci« slot.  
The CA modul is not supported in certain  
countries and regions; please consult your  
authorised dealer.  
1
2
Insert the corresponding smart card into the  
CI module.  
Insert the CI module with the smart card into  
the »Ci« slot on the television.  
4
Press »menu« to end the setting.  
note:  
7
In the »CA Module« sub-menu you can see  
which CA module has been inserted in the  
CI slot.  
7
If you are inserting a CA module into the  
CI slot of the television for the first time,  
you will need to wait a moment until the  
CA module is detected.  
-67  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
7
Select the line »Scan Mode« with »  
«.  
Select the scan mode with » « or » «  
(for unencrypted channels, for encrypted  
channels only, or both).  
v« or  
searching-for-digital-television-  
channels-from-a-satellite-auto-  
matically  
»Λ  
<
>
Satellite data changes frequently, new chan-  
nels are constantly being added. You should  
therefore perform an automatic search from time  
to time.  
8
Select the line »Service Type« with »  
«.  
Use » « or » « to select whether you  
v« or  
»Λ  
<
>
This searches all transponders for new channels.  
want to search for television channels (TV)  
only, radio stations only (Radio) or both  
(Radio + TV).  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »v«  
or »Λ« and press »oK« to confirm.  
9
Select the line »Network Search« with »  
or » «.  
Select the option »On« with » « or » «  
– If the »Network Search« is set to »On«,  
the data will be accessed via the new tran-  
sponder of the network which has been  
set.  
v«  
– The »SOURCE SETUP« menu appears.  
Λ
<
>
20.09.2010  
15:46  
SOURCE SETUP  
Source  
Satellite  
OK  
10 Start the scan with » « (red).  
Automatic Channel Search  
Digital Manual Tuning  
Antenna Settings  
note:  
7
If the previously stored channels should be  
retained in the channel list and the new  
channels found be added to it, then press  
Program Table  
Signal Information  
»
« (green).  
  
If » « (red) is pressed, the saved channels  
Automatic Service Update  
Off  
Not Inserted  
will be deleted from the current channel list.  
– The »Results« menu appears, and the scan  
for TV channels begins.  
CA -Module  
Positioner settings  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
Exit  
Back  
– The search is complete as soon as the  
»PROGRAM TABLE« appears.  
3
Select the line »Source« with »v« or »Λ«  
and press »oK« to confirm.  
note:  
Select the input source »Satellite« with » «,  
<
7
You can abort the search by pressing  
»menu«.  
» «, »  
v
« or »  
Λ
« and press »oK« to con-  
>
firm.  
11 Press »menu« to end the setting.  
4
5
6
Select the line »Automatic Channel Search«  
with »v« or »Λ« and press »oK« to confirm.  
– The menu appears.  
Select the line »Select Satellites« with »v« or  
»
Λ« and press »oK« to confirm.  
– The »SELECT SATELLITE« menu appears.  
Select a satellite with »v« or »Λ« and press  
»oK« to confirm.  
-68  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
searching-for-digital-television--  
channels-from-a-satellite-manu-  
ally  
If you know the parameters of a new television  
channel, you can also search for it manually.  
Current transponder data can be found in the  
teletext, in satellite TV magazines or on the  
Internet.  
lnB-settings  
notes:  
7
The following description about the LNB  
settings premise a substantial expertise  
about the satellite systems. Ask your  
specialist dealer.  
7
Your TV supports SCR system (Satellite  
Channel Router). If you are using SCR  
satellite system, follow the steps described  
1
2
Open the menu with »menu«.  
in »LNB Type« section.  
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
1
2
Open the menu with »menu«.  
– The »SOURCE SETUP« menu appears.  
Select »Digital Manual Tuning « with » « or  
« and press »oK« to confirm.  
– The menu appears.  
Select the line required for the parameters  
with » « or » «.  
Select the line »SOURCE SETUP« with »  
or » « and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
v
«
Λ
3
4
v
»Λ  
3
4
Select »Antenna Settings« with »v« or »Λ  
«
and press »oK« to confirm.  
– The »ANTENNA SETTINGS« menu ap-  
pears.  
v
Λ
– »Frequency (MHz)«: Enter the five-digit  
frequency with »1-...-0« .  
Select the line required for the parameters  
with »v« or »Λ«.  
– »Symbol Rate (kS/s)«: Enter the five-digit  
symbol rate with »1-...-0« .  
– »Satellite«: »Press oK«, select a satellite  
with » «, » «, » « or » « and press  
– »Polarization«: Use » « or » « to set the  
v
Λ
<
>
<
>
polarisation to »Horizontal« or »Vertical«.  
– »Network Search«: use » « or » « to se-  
»oK« to confirm.  
– »Transponder«: »Press oK«, select a tran-  
sponder with » «, » «, » « or » « and  
press »oK« to confirm. Use » « (red) to  
<
>
lect the option »On« or »Off«.  
– »Scan Mode«: Use » « or » « to select  
v
Λ
<
>
<
>
whether you want to search for unencrypt-  
ed (Unencrypted) channels only, encrypt-  
ed (Encrypted) channels only, or for both  
(Unencrypted + Encrypted).  
add a transponder, use » « (green) to  
  
delete it, or use » « (yellow) to change  
  
transponder data.  
– »LNB Power«: Set the LNB power supply  
(depending on the type of LNB) to »Off«  
»13/18 V« or »14/19 V« with » « or » «.  
– »Service Type«: Use » « or » « to select  
<
>
whether you want to search for television  
channels only (TV), radio stations only  
(Radio), or both (Radio + TV).  
<
>
– »LNB Type«: Select the LNB type used  
in the satellite system with » « or » «. If  
you are using a satellite antenna with an  
Single Cable Distribution multiswitch, select  
the setting »Grundig SCR«. After it, please  
perform the »User Band«, »KB Frequency«  
and »LNB Selection« settings in the  
<
>
5
6
Start the scan with » « (red).  
– The »Results« menu appears, and the scan  
for TV channels begins.  
note:  
7
You can abort the search by pressing  
»menu«.  
submenus. The necessary parameters you  
will get from the operator of the satellite  
antenna. Use only this specification!  
»User Band«: Select the user band  
Press »menu« to end the setting.  
number assigned to the user with » «  
<
or » «.  
>
-69  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
»KB Frequency (MHz)«: Enter the user  
settings-for-motorised-antennas-  
band frequency assigned to the user  
(DiseqC-1.2)  
band with »1...0« buttons.  
Your television set supports motorised satellite  
»LNB Selection«: If more than one  
satellites are used in the current SCR  
system, select »1/2« to»2/2« for the  
satellite corresponding to the relevant  
positions using » « or » « buttons.  
systems in compliance with DiSEqC 1.2. This  
function allows the satellite antenna to be oper-  
ated via the television set.  
1
2
Open the menu with »menu«.  
<
>
Select the line »SOURCE SETUP« with »  
v«  
notes:  
or »Λ« and press »oK« to confirm.  
7
Use installation equipment supported /  
suggested by your Multiswitch.  
– The »SOURCE SETUP« menu appears.  
3
Select the line »DiSEqC 1.2« with »  
v
«
7
7
7
Other users / receivers connected to the  
system may be affected if the specified user  
band number and frequency is changed  
during installation.  
or »  
Λ«. Select the option »On« with » «  
<
or » «  
>
– The line »User Mode« is active.  
note:  
User band and User band frequency is  
specified on the Multiswitch used; and  
each user / receiver uses a specified user  
band and user band frequency.  
7
Additional operations are explained in the  
following sections.  
With SCR satellite system, auto search by  
several users / receivers at the same time  
may cause problems.  
– »22 KHz«: Depending on the LNB type,  
22 kHz audio is selected. For a univer-  
sal LNB, this option is set to »Auto« and  
cannot be changed.  
– »DISEqC mode« and »LNB selection«:  
depending on the type of antenna used,  
use » « or » « select the option »Off«,  
<
>
»DiSEqC 1.0« or »DiSEqC 1.1«.  
»Off«: for a satellite system with only  
one antenna.  
»DiSEqC 1.0«: allows up to four satel-  
lites to be received simultaneously.  
Under »LNB selection«, use » « or  
<
» « to select the option »1/4«, »2/4«,  
>
»3/4« or »4/4«.  
»DiSEqC 1.1«: allows up to 16 satel-  
lites to be received simultaneously.  
Under »LNB selection«, use » « or  
<
» « to select the option »1/16« to  
>
»16/16«.  
5
Press »menu« to end the setting.  
-70  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
user-mode  
expert-mode  
You can adjust the alignment of the satellite an-  
tenna to each individual satellite. These settings  
will be saved so that the antenna can later be  
easily guided to each saved alignment.  
You can restrict the antenna's range or reset  
the antenna.  
1
Select the line »Installer Mode« with »  
« and press »oK« to confirm.  
– The »INSTALLER MODE« menu appears.  
v« or  
»Λ  
1
Select the line »User mode« with »  
v«  
or » « and press »oK« to confirm.  
Λ
2
Select the preferred option with  
or » «.  
»v«  
– The »USER MODE« menu appears.  
Λ
2
Select the preferred option with  
»
v
«
– »Limit Position«: Defines the range in  
or »  
– »Satellite«: »Press oK«, select a satellite  
with » «, » «, » « or » « and press  
Λ«.  
which the antenna may move. Use » «  
<
to set the western limit, use » « to set the  
>
v
Λ
eastern limit.  
<
>
»oK« to confirm.  
– »Move Motor«: Aligns the antenna with  
– »Transponder«: »Press oK«, select the  
transponder from which the signal is being  
the selected satellite. Use » « to align the  
<
antenna to »west«, use » « to align the  
>
received with » «, » «, »  
v« or »  
Λ« and  
antenna to »east«.  
<
>
press »oK« to confirm.  
– »Go To Stored Position«: Press »oK« to  
save the current antenna alignment.  
– »Store Stored Position«: Aligns the antenna  
with the reference point of the positioner.  
– »Reset DiSEqC 1.2 Limit«: Resets the limit  
position of the antenna.  
– »Moving Mode«: Use » « or » « to select  
<
>
the option »Discrete« or »Continuous«.  
– »Discrete«: Moves the antenna in  
defined steps to the west and the east.  
– »Continuous«: Moves the antenna to the  
west or east continuously.  
– »Step Size«: Use » « or » « to select the  
<
>
number of steps with which the antenna  
should turn. »Step Size« is only active  
when the »Transport Mode« was set to  
»Discrete«.  
– »Move Motor«: Aligns the antenna with  
the selected satellite. Use » « to align it to  
<
»West«, use » « to align it to »East«.  
>
– »Go To Stored Position«: Aligns the antenna  
to a saved satellite position. Up to 50 posi-  
tions can be saved. »Press oK« and then  
select the saved position with » « or » «.  
Press » « (green) to confirm – the anten-  
na will be aligned with the saved position.  
<
>
  
– »Store Stored Position«: The current anten-  
na alignment is saved.  
3
Press »menu« to end the setting.  
-71  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
note:  
searching-for-television-chan-  
7
You can accelerate the search. To do this,  
you need information about the frequency  
and network ID. You are usually able to get  
this data from your cable operator or find it  
in forums on the Internet. For example, the  
frequency 402MHz and network ID 61441  
can be entered for Germany.  
nels-from-the-cable-provider-  
automatically  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v
«
«
– The »SOURCE SETUP« menu appears.  
Select the line »Source« with  
or » « and press »oK« to confirm.  
Select the option »Cable« with » «, » «,  
7
Start the scan with » « (red).  
– All channel and favourites lists will be  
deleted and compiled anew.  
3
4
»
v
Λ
<
>
»v  
« or »  
Select the line »Automatic Channel Search«  
with » « or » « and press »oK« to confirm.  
– The menu appears.  
Λ« and press »oK« to confirm.  
note:  
7
After starting the scan, a security query will  
appear. Press » « (green) to confirm the  
  
v
Λ
option »Yes«.  
– The »Results« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
20.09.2010  
15:46  
SOURCE SETUP  
AUTOMATIC CHANNEL SEARCH  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
Connection Type  
Cabel  
U.K.  
Country  
note:  
ATV & DTV  
Quick  
Scan Type  
7
You can abort the search by pressing  
»menu«.  
Cable Scan Type  
Frequency (MHz)  
Network ID  
Auto  
8
Press »menu« to end the setting.  
Auto  
Exit  
Back  
Start Search  
5
6
Select the line »Scan Typ« with »  
v
« or »  
Λ
«
and set the option »DTV« with » « or » «.  
<
>
Select the line »Cable Scan Type« with »  
or »  
with » « or » «.  
v«  
Λ« and set the option »Quick« or »Full«  
<
>
– The search function »Quick« sets the channels  
according to the information provided by your  
cable provide in the transmission signal.  
– If the option »Full« is selected, the entire fre-  
quency range will be scanned. The search can  
take a long time with this option. This option is  
recommended if your cable provider does not  
support the search type »Quick«  
.
-72  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
searching-for-television-channels- searching-for-digital-terrestrial-  
from-the-cable-provider-manu-  
ally  
tv-channels-automatically  
1
Open the menu with »menu«.  
1
Open the menu with »menu«.  
2
Select the line »SOURCE SETUP« with »  
v
«
«
or »Λ« and press »oK« to confirm.  
2
Select the line »SOURCE SETUP« with »  
v
«
«
– The »SOURCE SETUP« menu appears.  
Select the line »Source« with  
or » « and press »oK« to confirm.  
Select the option »Air« with » «, » «, »  
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3
»
v
Λ
3
Select the line »Source« with »v« or »  
Λ
v« or  
and press »oK« to confirm.  
<
>
»
Λ« and press »oK« to confirm.  
Select the option »Cable« with » «, » «,  
<
>
»v« or »Λ« and press »oK« to confirm.  
Caution:  
4
5
Select » Digital Manual Tuning« with »  
v
« or  
7
The antenna power supply (line »Active  
Antenna Power«) may only be switched on  
if the antenna is an active indoor antenna  
with a signal amplifier and it is not already  
supplied with a voltage via a mains plug  
(or similar supply). Otherwise you may  
cause a short circuit and irreparably dam-  
age your antenna.  
»
Λ
« and press »oK« to confirm.  
– The menu appears.  
Enter the four-digit frequency with »1-...-0«  
and press »oK« to confirm.  
The search starts after confirming, the  
channels found are displayed in the »Re-  
sults« menu.  
4
5
Select the »Active Antenna Power« with »  
or » «. Switch on the antenna power supply  
for the antenna with » « or » « (»On«).  
v«  
6
Press »menu« to finish the setting.  
Λ
<
>
Select the line »Automatic Channel Search«  
with » « or » « and press »oK« to confirm.  
– The menu appears.  
v
Λ
20.09.2010  
15:46  
SOURCE SETUP  
AUTOMATIC CHANNEL SEARCH  
Connection Type  
Air  
U.K.  
Country  
DTV & ATV  
Scan Type  
Exit  
Back  
Start Search  
-73  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
6
Select the line »Scan Typ« with »  
v« or »Λ«  
searching-for-digital-terrestrial-  
tv-channels-manually  
and set the option »DTV« with » « or » «.  
<
>
7
Start the scan with » « (red).  
1
Open the menu with »menu«.  
– All channel and favourites lists will be  
deleted and compiled anew.  
2
Select the line »SOURCE SETUP« with »  
v
«
«
or »Λ« and press »oK« to confirm.  
note:  
– The »SOURCE SETUP« menu appears.  
7
After starting the scan, a security query will  
3
Select the line »Source« with »v« or »  
Λ
appear. Press » « (green) to confirm the  
  
and press »oK« to confirm.  
option »Yes«.  
Select the option »Air« with » «, » «, »v« or  
<
>
– The »Reults« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
– The scan is complete as soon as the  
»PROGRAM TABLE« appears.  
»Λ  
« and press »oK« to confirm.  
Caution:  
7
The antenna power supply (line »Active  
Antenna Power«) may only be switched on  
if the antenna is an active indoor antenna  
with a signal amplifier and it is not already  
supplied with a voltage via a mains plug  
(or similar supply). Otherwise you may  
cause a short circuit and irreparably dam-  
age your antenna.  
note:  
7
You can abort the search by pressing  
»menu«.  
8
Press »menu« to end the setting.  
4
Select the »Active Antenna Power«« with  
Automatic-service-update-  
If this function is activated, possible changes of  
network operators are updated automatically.  
»
v« or »Λ«. Switch on the antenna pow-  
er supply for the antenna with » « or » «  
<
>
(»On«).  
Select » Digital Manual Tuning« with »  
« and press »oK« to confirm.  
– The menu appears.  
Enter the channel number directly with  
1-...-0« and press »oK« to confirm.  
The unit must be located in stand-by mode.  
5
6
v« or  
»Λ  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP with »v«  
or »Λ« and press »oK« to confirm.  
«
»
3
4
5
Select the line »Automatic Service Update«  
with » « or » «.  
–After the search is complete, the channels  
found are displayed in the »Results« menu.  
v
Λ
Select the automatic update with » « or » «  
(»On«).  
<
>
7
Press »menu« to finish the setting.  
Press »menu« to end setting.  
-74  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
4
Select the line »Automatic Channel Search«  
with »  
firm.  
tuning-analogue-television-  
-channels  
This setting is only necessary if you cannot re-  
ceive any digital channels and you have not car-  
ried out an analogue search during initial setup.  
The television channels can be set directly or  
using the scan.  
v« or »  
Λ
« and press »oK« to con-  
20.09.2010  
15:46  
SOURECE SETUP  
Source  
Air  
OK  
Automativ Channel Search  
Digital Manual Tuning  
Analogue Manual Tuning  
Program Table  
switching-the-television-to-  
-analogue-reception  
note:  
7
Analogue channels can be selected if the  
option »Air« or »Cable« has been selected.  
Signal Information  
1
2
Open the »Select input source« menu with  
«.  
Automatic Service Update  
On  
»
CA - Modul  
Not inserted  
Off  
Depending on the antenna system, select the  
Active Antenna Power  
option »Air« or »Cable« with »v«, »Λ«, » «  
<
Exit  
or » « as the input source and press »oK«  
>
Back  
to confirm.  
note:  
7
Additional operations are explained in the  
following sections.  
5
6
Select the line »Scan Typ« with »  
v« or »Λ«  
and set the option »ATV« with » « or » «.  
<
>
Start the scan with » « (red).  
setting-all-analogue-television-  
channels  
Analogue channels are displayed in the channel  
list after the digital channels.  
note:  
7
After starting the scan, a security query will  
appear. Press » « (green) to confirm the  
  
option »Yes«.  
note:  
– All channel and favourites lists for the ana-  
logue channels will be deleted and com-  
piled anew.  
– The »Results« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
– The search is complete as soon as the »PRO-  
GRAM TABLE« appears.  
7
Plug the rooftop antenna cable (for analogue  
television channels) into the »Ant-in«  
socket on the television.  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »  
v
«
«
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3
Select the line »Source« with »v« or »  
Λ
note:  
and press »oK« to confirm.  
7
You can abort the search by pressing  
»menu«.  
Select the option »Air« or »Cable« with » «,  
<
» «, »  
firm.  
v« or »  
Λ
« and press »oK« to con-  
>
7
Press »menu« to end the setting.  
-75  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
note:  
tuning-the-television-channels-by-  
entering-the-channel-numbers  
7
If you wish to remedy other television  
channels, repeat steps 4 to 7.  
1
Open the menu with »menu«.  
8- Press »menu« to end the setting.  
2
Select the line »SOURCE SETUP« with »  
v«  
or »Λ« and press »oK« to confirm.  
Changing-stored-analogue-  
-channels  
If channels were stored with the automatic chan-  
nel search while tuning the television channels,  
you can delete them. You can also store chan-  
nels in a different preset, change or enter the  
name of a channel as well as skip channels.  
– The »SOURCE SETUP« menu appears.  
3
Select the line » Analogue Manual Tuning«  
with »v« or »Λ« and press »oK« to confirm.  
– The menu appears.  
INSTALLATION  
ANALOGUE MANUAL TUNING  
selecting-a-channel-list  
Program No  
TSystem  
Band  
1
BG  
C
1
Open the menu with »menu«.  
2
Select the line »SOURCE SETUP« with »  
v«  
or »Λ« and press »oK« to confirm.  
Channel  
2
– The »SOURCE SETUP« menu appears.  
Fine Tuning  
0
3
Select the line »Program Table« with » « or  
v
48.25 MHz  
»
Λ« and press »oK« to confirm.  
– The »PROGRAME TABLE« menu appears.  
note:  
Auto Previous  
Auto Next  
Store  
7
Additional operations are explained in the  
following sections.  
4
5
Select the line »Program No« by pressing »  
v«  
or » « and use » « or » « to save the preset.  
Λ
Deleting-channels  
<
>
Select »Band« by pressing »  
v
« or »  
(special channel) or »C« (normal channel).  
Select the line »Channel« with » « or » « and  
Λ« and  
1
In the »PROGRAME TABLE« menu, select the  
television channel to be deleted with «,  
«, » « or » « and press » « (red) to con-  
use »» « or » « to choose between »S«  
<
>
»v  
»
Λ
<
>
6
v
<
Λ
firm.  
Delete the selected channel by pressing  
« (yellow).  
enter the channel number with » « or » « step  
>
2
by step, or use »1…0« to enter the channel  
»
  
number directly, or  
start a automatic scan with  
(green) oder  
»
«
  
note:  
(yellow)  
.
»
«
  
7
»
« (blue) allows all television channels  
  
notes:  
to be deleted.  
7
The current system is displayed in the  
»System« line. If the colour or sound is  
not functioning properly, select the line  
3
Press » « (green) to confirm the deletion  
  
process.  
»System« with »  
v« or »Λ«. Use » « or » «  
<
>
to select the preferred setting.  
7
If fine tuning is necessary, select the line  
»Fine Tuning« with » « or » « and use » «  
or » « to make the setting.  
v
Λ
<
>
7
Press » « (blue) to save the setting.  
  
-76  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
entering-channel-names-(8-digit-  
maximum)  
Creating-lists-of-favourites  
You can select your favourite channels and save  
them in up to four favourites lists (Fav 1 to Fav 4).  
1
In the »PROGRAME TABLE« menu, select the  
television channel with » «, » «, » « or  
» « and press » « (red) to confirm.  
v
Λ
<
1
2
3
In the »PROGRAME TABLE« menu, switch  
>
over to the list view with » « (yellow).  
  
2
Open the input keyboard with » « (green).  
  
Select the preferred channel with »  
or »Λ«.  
v«  
note:  
7
If necessary, delete the current channel  
Use » « or » « to ”push“ the channel into  
<
>
name. To do this, select the »  
« button  
one of the favourites lists 1 to 4 and press  
»oK« to confirm.  
with » « or » « and delete repeatedly using  
<
>
»oK«  
Select the required letters or numbers with  
«, » «, » « or » « and confirm with  
»oK«  
.
– The position in the favourites list is marked  
with »«.  
– You can enter the same channel in more  
than one favourite list.  
– Each favourite list can store up to  
255 channels.  
3
4
»
v
Λ
<
>
.
Repeat the entry for further letters/numbers.  
note:  
note:  
7
Use the »ABC« button to switch to upper  
7
Channels can also be deleted from favour-  
case letters and use the »?@123« button to  
switch to symbols and numbers.  
ites lists. Select the channel to be deleted  
with »  
v«, »Λ«, » « or » « and delete it with  
<
>
»oK«  
.
Save the channel name by using »v«, »Λ«,  
» « or » « to select »Submit« and confirm  
<
>
exiting-the-settings  
with »oK«  
.
1
Press »menu« to end the setting.  
note:  
7
If you wish to enter other channel names,  
repeat steps 1 to 4.  
skipping-television-channels  
You can highlight television channels to be  
skipped when you select with »Λ« or »v«.  
Selection is still possible using the number  
buttons.  
1
2
3
In the »PROGRAMETABLE« menu, switch over  
to the list view with » « (yellow).  
  
Select the preferred channel with »  
v«  
or »Λ«.  
Select the column »Skip« with » « or » «  
<
>
and use »oK« to mark the channel.  
– The channel is marked using »«.  
note:  
7
Channels can also be reactivated. Select the  
channel with » « or » «, then select the  
column »Skip« and reactivate the channel  
with »oK«  
v
Λ
.
-77  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
Displaying-signal-information  
(for digital channels only)  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
3
Select the line »Signal Information« with  
« or » « and press »oK« to confirm.  
»v  
Λ
– Information on the channel, network,  
modulation, symbol rate, quality and  
signal strength is displayed.  
notes:  
7
The signal information changes in accord-  
ance with the current input source.  
7
The signal properties are displayed in the  
lower section of the menu. The further the  
bars for »Quality« and »Signal Strenght«  
extend to the right, the better the reception  
signal.  
7
The signal level not only depends on your  
receiver system, but also on the channel  
which is currently active. Remember this  
when aligning your antenna based upon  
the signal level display.  
4
Press »menu« to close the menu.  
-78  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
terrestrial-(DvB-t):  
VHF/UHF band, Bandwidth 7 MHz  
and 8 MHz  
GrunDiG-46-vle-8160-Bl  
technical-data  
FFT Size:  
2k, 8k  
operating-voltage:-  
Modulation:  
16QAM, 64QAM, QPSK  
220–240 V, , 50–60 Hz  
~
Guard Interval: 1/4, 1/8, 1/16, 1/32  
power-consumption:  
On mode 82 W  
Standby <0.50 W  
terrestrial-(DvB-t2):  
VHF/UHF band, Bandwidth 7 MHz  
and 8 MHz  
energy-efficiency-class:  
A
FFT Size:  
Modulation:  
1k, 2k, 4k, 8k, 16k, 32k  
16QAM, 64QAM,  
256QAM, QPSK  
maximum-power-consumption  
On mode 180 W  
Guard Interval: 1/4, 19/256, 1/8, 19/128,  
1/16, 1/32, 1/128  
Annual-power-consumption  
120 kWh  
As this feature is optional, it is not available in  
all products.  
Audio-output:-  
2 x 20 W music power output  
2 x 10 W Sine wave power  
Analogue-reception-ranges:  
C02 ... C80, special channels S01 ... S41  
preset-channels:-  
rohs-limits: Pb (Lead)/Hg (Mercury)  
All Channels 6000 (Satellite – DVB-S),  
1000 (Cable – DVB-C) or  
99 (Analogue)  
Pb meets ROHS directive / 0 mg  
peak-luminance-ratio:  
65 %  
1000 (Terrestrial – DVB-T) or  
99 (Analogue)  
9 AV, 2 USB  
Default-satellite:  
20  
screen-(dm²):  
58 dm²  
screen-size:  
117 cm/46 inch  
lnB-power-supply:  
13/18 V, 14/19 V optional, maximum 450 mA  
lnB-switching-signal:  
0/22 kHz 650mV +/- 250mVpp  
maximum-resolution:  
WUXGA, 1920 x 1080  
DiseqC:  
1.0-operation, 1.1-operation, 1.2-operation  
weight:  
approx. 20 kg  
Digital-reception-ranges  
satellite:  
Dimensions:  
W H D 108,3 cm x 71,5 cm x 4,3 cm  
Ku band:  
10,700 MHz – 12,750 MHz  
Modulation: DVBS QPSK, DVBS2 QPSK,  
8 PSK  
IF band:  
950 MHz – 2,150 MHz  
Signal level: -25dBm to -65 dBm  
Cable:  
Overall band: 110 MHz – 862 MHz  
Modulation:  
16QAM, 32QAM, 64QAM,  
128QAM and 256QAM  
Symbol rate: 4.0 Msym/s to 7.4 Msym/s  
Technical changes and errors reserved.  
-79  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
For-customers-in-russian  
1.-srD-with-FHss-modulation  
service-information-for-dealers  
Only operate the  
television with the  
power supply/power  
cord provided.  
7
Maximum 2.5 mW e.i.r.p.  
7
Maximum 100 mW e.i.r.p. Permitted for use  
SRD for outdoor applications without restric-  
tion on installation height only for purposes of  
gathering telemetry information for automated  
monitoring and resources accounting systems.  
Permitted to use SRD for other purposes for  
outdoor applications only when the installa-  
tion height is not exceeding 10 m above the  
ground surface.  
The product complies with the following EU di-  
rectives:  
Power consumption values and classes are speci-  
fied according to the regulations 2009/642 and  
2010/1062 and the standards EN62087 and  
EN62301 as per European Union framework di-  
rectives 2009/125/EC and 2010/30/EU.  
7
Maximum 100 mW e.i.r.p. Indoor applica-  
tions.  
With this note, Grundig declares that this appli-  
ance is in conformity with the main and other rel-  
evant terms of the 1999/5/EC directive.  
2.-srD-with-Dsss-and-other-than-FHss-  
wideband-modulation-  
To obtain a copy of the Declaration of Confor-  
mity (Doc), please submit your request by using  
download/doc  
7
Maximum mean e.i.r.p. density is 2 mW/  
MHz. Maximum 100 mW e.i.r.p.  
7
Maximum mean e.i.r.p. density is 20 mW/  
MHz. Maximum 100 mW e.i.r.p. Permitted to  
use SRD for outdoor applications only for pur-  
poses of gathering telemetry information for  
automated monitoring and resources account-  
ing systems or security systems.  
Maximum mean e.i.r.p. density is 10 mW/  
MHz. Maximum 100 mW e.i.r.p. Indoor ap-  
plications.  
This appliance can be operated in the following  
European countries.  
AT BE BG CH CY CZ DE DK  
EE ES FI  
IS IT LI  
FR GB GR HU IE  
LT LU LV MT NL  
7
NO PL PT RO SE SI SK TR  
For-customers-in-ukraine  
e.i.r.p. ≤100 mW with built-in antenna with am-  
plification factor up to 6 dBi.  
This appliance can also be operated in countries  
outside Europe.  
Please observance the restrictions for the follow-  
ing countries:  
environmental-note  
This product has been made  
from high-quality parts and  
For-customers-in-France  
Outdoor use limited to 10 mW e.i.r.p. within the  
band 2454-2483.5 MHz. Military Radioloca-  
tion use. Refarming of the 2.4 GHz has been  
ongoing in recent years to allow current relaxed  
regulation. Full implementation planned 2012.  
materials which can be re-used  
and recycled.  
Therefore, do not dispose of the product along  
with normal household waste at the end of its  
service life. Take it to a collection point for the  
recycling of electrical and electronic equipment.  
Dispose of the used device at a collection point  
for electrical and electronic equipment. The sym-  
bol on the product, in the operating manual or on  
the packaging indicates that recycling is possible.  
Information on collection points is available from  
your local authorities.  
For-customers-in-italy  
For private use, a general authorisation is re-  
quired if WAS/RLAN’s are used outside own  
premises. For public use, a general authorisation  
is required.  
For-customers-in-norway  
This subsection does not apply for the geograph-  
ical area within a radius of 20 km from the cen-  
tre of Ny-Ålesund.  
Help protect the environment by recycling used  
products.  
-80  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
troubleshooting  
If the information provided below does not help, please consult an authorised GRUNDIG dealer.  
Please bear in mind that malfunctions can also be caused by external devices such as video recorders  
or satellite receivers.  
problem  
possible-cause  
remedy  
Screen lit (snow), but no station  
visible  
Antenna cable  
Is the antenna cable connected?  
No TV channel tuned  
Start a channel scan  
Insufficient contrast in picture  
The picture settings are not correct  
Adjust the brightness, contrast or colour  
setting  
Problem at station  
Try another channel  
Picture and/or sound distorted  
Ghosting, reflection  
Interference from other devices  
Place the device in a different position  
Channel setting  
Antenna  
Automatic or manual tuning/fine tuning  
Have antenna cable or system checked  
Turn up the colour  
No colour  
Colour intensity too low  
Adjust TV standard (if setting option is  
available)  
Select the correct colour standard  
Problem at station  
Try a different channel  
Picture but no sound  
Volume is set to a minimum  
Turn up or switch on the volume  
Teletext impaired or absent  
Problem at station  
Try a different channel  
Television channel (no teletext)  
or antenna system  
Try with a different TV channel,  
carry out fine tuning  
Station signal too weak  
Check antenna  
The remote control does  
not work  
Obstacle between remote control and  
device.  
Point remote control at television  
Battery problem  
Check batteries and replace if  
necessary  
Operating mode undefined  
Switch off the television at the mains  
switch for two minutes  
Picture too dark in PC mode  
Incorrect setting for picture resolution  
and picture frequency on the PC  
Change settings on the PC  
(e.g. 1280 x 768 resolution,  
refresh rate 60 Hz)  
DMS device cannot be found DMS device is not switched on or  
not started  
Make sure that the DMS device is on  
and operating.  
Network connection settings are not  
made.  
Check the network settings.  
-81  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
problem  
possible-cause  
remedy  
Low image quality (pixel) in  
WLAN mode  
Signal is lost based on structural  
conditions.  
Place the modem so that the signal to  
the television is not interrupted.  
Internet connection speed low.  
Low Internet speed is a problem that  
is related with the speed of your sub-  
scription or a failure in the Internet in-  
frastructure. Contact with your service  
provided (ISP).  
DMS (for example PC) is connected  
to the wireless network and away  
from the modem  
Bring your DMS closer to the modem  
Warnings about the connec-  
tion problems on the display  
Network Cable or wireless USB net-  
work device may be disconnected  
Check network cable or wireless USB  
network device  
Modem does not have Internet con-  
nection or has problems  
Make sure that your modem has In-  
ternet connection  
Videos in video aplications  
are lagging during playback  
in wired connection  
Internet connection speed low  
Low Internet speed is a problem that  
is related with the speed of your sub-  
scription or a failure in the Internet in-  
frastructure. Contact with your service  
provided (ISP).  
There are connection prob-  
lems in inter@ctive applica-  
tions  
This may occur due to temporary  
problems in servers of these applica- again  
tions  
Try connecting to the applications  
note:  
7
This is a Class A product. During operation the device can cause radio interference. In this case  
the user may have to remedy this. Please contact your specialist dealer.  
-82  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Power Roller G7148 User Manual
Haier Refrigerator ESR042PBB User Manual
Hamilton Beach Blender 840123204 User Manual
Heat Glo LifeStyle Indoor Fireplace EXCLAIM 42H C User Manual
Honeywell Burner Q345A User Manual
Honeywell Marine Lighting SG 60 User Manual
HP Hewlett Packard Server 674786 001 User Manual
HP Hewlett Packard Telephone B06X User Manual
Husqvarna Lawn Mower YTH2754T User Manual
IBM Switch NH2025 10 User Manual