COLOR
TELEVISION
VISION 26
LXW 68-8510 TOP
VISION 32
LXW 82-8510 TOP
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
TÜRKÇE
POLSKI
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________________
SET-UP AND SAFETY
10
cm
10
cm
Please note the following information when setting up your television set.
20
cm
20 cm
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
olf
G
m
a
g
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar items
beneath it.
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
AV
AV
AV
3
2
1
VICE !
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
VIDEO
L
R
VIDEO
L
R
PC-DVI
PC-IN
AUDIO IN
A
N
T
I
N
S-VHS
DVI-D
A
V
-
4
AV
OUT
! SER
A
C
I
N
Ensure that the mains cable and the mains adapter are not damaged.
The television set may only be operated with the mains cable/adapter
supplied.
TV
R
AV
AV
AV
3
2
1
Thunderstorms are a danger to all electrical devices. Even if the tele-
vision set is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always disconnect the mains and antenna
plugs during a storm.
VIDEO
L
R
VIDEO
AV
L
OUT
R
PC-DVI
AUDIO IN
A
N
T
I
N
S-VHS
PC-IN
DVI-D
A
V
-
4
A
C
I
N
Clean the screen with a soft, damp cloth. Only use plain water.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
__________
CONNECTION/PREPARATION
Connecting the antenna and the mains cable
AV
AV
AV
3
2
1
TV
R
VIDEO
L
R
VIDEO
L
R
PC-DVI
AUDIO IN
A
S-VHS
PC-IN
DVI-D
AV - 4
AV OUT
1
2
3
1
Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-
na socket on the television.
2
3
Plug the mains cable supplied into the mains socket of the television.
Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or
AA, 2x1,5V). Observe the polarity (marked on the base
of the battery compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability for damage re-
sulting from used batteries.
Environmental note
Batteries, including those which contain no heavy metal,
may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound
manner. Find out about the legal regulations which apply
in your area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
____________________________________________
OVERVIEW
Connections on the television
AV 3
AV 2
AV 1
AV 3
AV 2
AV 1
DVI-D
VIDEO
L
R
VIDEO
L
R
PC-DVI
AUDIO IN
ANT IN
S-VHS
PC-IN
DVI-D
AV - 4
AV OUT
ANT IN
AC IN
AC IN
AV 4 VIDEO L R
y
PC-IN
AV OUT VIDEO L R
PC-DVI AUDIO IN
S-VHS
AV 3
Euro/AV socket (FBAS).
Euro/AV socket (FBAS).
Euro/AV socket (FBAS, RGB).
Antenna socket.
AV 2
AV 1
ANT IN
AV 4 VIDEO L R
Sound/picture input.
AV OUT VIDEO L R Sound/picture output.
S-VHS
S-VHS picture signal input.
Sound signal input for PC.
PC-DVI AUDIO IN
PC-IN
VGA connection for PC; make the YUV connection
with the adapter cable supplied.
DVI-D
AC IN
y
DVI-D connection for PC.
Socket for the mains cable.
Headphone jack (3.5 mm ø jack plug).
High definition – HD ready
Your television can receive high-definition television signals (HDTV).
You can connect the input sources (HDTV set-top box or HDTV DVD
player) to either the »DVI-D« socket (digital HDTV signal) or the
»
PC-IN« socket (analogue HDTV signal).
This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High-Definition Copy Protection).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
____________________________________________
OVERVIEW
The remote control
Ǽ
Switches off the television set (standby).
PIP
Shows an inset picture;
PIP
activates the double window function (two different
TV programmes on separate halves of the screen);
switches back to normal size.
Switches between picture formats;
page stop in teletext mode.
E
z
-/--
Shows information on channel position;
switches to double character size in teletext mode.
1…0
Switch the television on from standby mode;
select channels directly.
TXT
AV
POS
d
SCAN
PAP
SIZE
d
Sound on/off (mute).
i
Opens and closes the »MAIN MENU«;
closes all menus.
VCR
DVD
SAT
Z
Zap function.
P+, P-
Switches the television on from standby;
selects stations step by step;
Tele Pilot 160 C
moves the cursor in the menus up and down.
Ǹ Ƿ
OK
Adjust the volume;
move the cursor left/right.
Calls up the preset list;
activates various functions.
TXT
AV
Switches from TV mode to teletext mode and back to
TV mode.
Opens the pre-selection for AV channels.
Then selection with P+ or P-.
SCAN
PAP
Reveals answers in teletext mode.
Activates the double window function (TV image and
teletext on separate halves of the screen).
SIZE
POS
Changes the size of the inset picture;
selects sub-pages in teletext mode.
Changes the position of the inset picture;
updates a page in teletext mode.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
____________________________________________
OVERVIEW
z
Selects various picture settings;
moves back a page in teletext mode.
Ȅ
Ƿ
F
Time on;
PIP
moves to the next page in teletext mode.
Freeze-frame;
selects the chapter in teletext mode.
Selects various sound settings;
selects a topic in teletext mode.
z
VCR, SAT Switches to operating a GRUNDIG video recorder,
DVD
a GRUNDIG satellite receiver or a GRUNDIG DVD
player.
TXT
AV
POS
d
Keep the appropriate button (»VCR«, »SAT«,
»DVD«) pressed down. Then press the appropriate
button.
SCAN
PAP
SIZE
Note:
VCR
DVD
SAT
The functions available depend on the model of the
device you are using.
Just try it out.
Tele Pilot 160 C
Controls on the television
+ P –
Switches the television on from standby;
channel selection.
TV/AV
Selects the AV channels and the most
recently viewed television channel.
MENU
+ z –
IO
Opens the »MAIN MENU«.
Adjusts the volume.
Switches the television into and out of
standby mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Setting television channels automatically
The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
99 preset positions are provided, to which you can assign television
channels from the antenna or from the cable connection.
Sprache
Deutsch
Dansk
Português
Svenska
Suomi
Türkçe
Eλληvικά
Hrvatski
Pyccꢀꢁꢂ
Español
Français
English
Italiano
Norsk
âesky
Sloven‰cina Româna
Slovensko
Magyar
Polski
Cꢃꢄꢅꢀꢁ
ꢆꢇꢈꢉapꢅꢀꢁ
Dutch
1
Switch on the television with »IO« on the television set, then
press »P+« on the remote control.
Auswählen
und bestätigen
Zurück
Ende
OK
G
– The »Sprache« (Menu language) menu appears when the
television is first switched on.
Hint:
If the »Sprache« (Menu language) menu does not appear on
the screen, then set it in accordance with the chapter on reset-
ting all television channels on page 27.
Country
2
3
Select language with »P+«, »P-«, » « or » « and press
»OK« to confirm.
– The »Country« menu appears.
Germany
Austria
Greece
Hungary
Iceland
Ireland
Italy
Romania
Slovakia
Slovenia
Spain
Ǹ
Ƿ
Belgium
Bulgaria
Croatia
Czech
Sweden
Press »P+«, »P-«, » « or » « to select the country and
Ǹ
Ƿ
Luxembourg Switzerland
Netherlands Turkey
Denmark
England
Finland
France
»OK« to confirm.
Norway
Poland
Yugoslavia
– The search begins. It may last a few minutes, depending on
the number of television stations found.
Portugal
– After the search the television switches to channel position 1
and the »Program table« menu appears.
Select
and confirm
Back
OK
Exit
G
Changing stored channels
You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Program table
01 ARD
02 ZDF
09
17 ----
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
S
S
S
S
S
S
S
S
10
03 BR
11
S
S
S
S
S
S
Deleting channels
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
1
In the »Program table« menu, select the station to be deleted
05 SAT 1
06 PRO 7
07 BR
with »P+«, »P-«, » « or » «.
Ǹ
Ƿ
08 TEL5
Ƿ
2
3
Highlight the channel with » « (yellow).
Skip
Ƿ
Press » « (yellow) to delete the channel.
OK
Select
Exit
Move
Delete
Name
G
Note:
To delete other stations, repeat steps 1 and 3.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Sorting television channels
1
In the »Program table« menu, select the channel to be moved
Program table
01 ARD
02 ZDF
with with »P+«, »P-«, » « or » «.
Ǹ
Ƿ
09
17 ----
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
S
S
S
S
S
S
S
S
10
2
3
Highlight the channel with »
Ȅ
« (green).
03 BR
11
S
S
S
S
S
S
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
Select a new channel position by pressing »P+«, »P-«, » « or
Ǹ
05 SAT 1
06 PRO 7
07 BR
»
« and then press »Ȅ« to confirm.
Ƿ
– All of the channels that follow move up one position.
08 TEL5
Note:
Skip
To sort the other television channels repeat steps 1 to 3.
OK
Select
Exit
Move
Delete
Name
G
Entering the channel names
(maximum of 5 characters)
1
In the »Program table« menu, select the desired channel with
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
Program table
01 ARD
02 ZDF
09
17 ----
S
S
S
S
S
S
S
S
F
2
3
Highlight the channel with » « (blue).
10
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
03 BR
11
S
S
S
S
S
S
Select letters or numbers with »P+« or »P-«, move to the next
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
position with » « or » « and repeat.
05 SAT 1
06 PRO 7
07 BR
Ǹ
Ƿ
F
4
Store the channel name with » « (blue).
08 TEL5
Note:
Skip
Move
To enter additional channel names, repeat steps 1 to 4.
OK
Select
Exit
G
Delete
Name
Skipping television channels
You can mark television channels which should be skipped during
selection with »P+« or »P-«. A selection with the number keys is
also possible.
Program table
01 ARD S
02 ZDF
09
17 ----
S
S
S
S
S
S
S
S
1
In the »Program table« menu, select the desired channel with
10
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
03 BR
11
S
S
S
S
S
S
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
z
2
Highlight the channel with »
« (red).
05 SAT 1
06 PRO 7
07 BR
– An »S« appears behind the name of the television station.
– You can deselect the selected channel by pressing the red
button again.
08 TEL5
Skip
Concluding the settings
Press »i« to finish the settings.
Select
Exit
Move
Delete
Name
OK
G
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Picture settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Picture
Brightness
Contrast
39
2
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Colour
Sharpness
Hue
Noise reduction
Picture smart
Sharp
User
3
4
Select »Default settings« with »P+« or »P-« and the setting
»User« with » « or » «.
Ǹ
Ƿ
Select
Back
Exit
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Noise reduction« with »P+« or »P-« and press »OK« to con-
firm.
OK
G
and edit
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for
playback of American television programmes on the video
recorder).
5
6
Press » « or » « to select the level, and then press »OK« to
confirm.
Ǹ
Ƿ
Press »i« to finish the settings.
Audio settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Sound
Volume
0
Balance
Sound type
Effect
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Stereo
Normal
On
AVL
Headphones
Equalizer
Note:
Further operation is explained in the following sections.
Select
Back
Exit
and edit
Volume
1
Select »Volume« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
Balance
1
Select »Balance« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
10
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual B «) and the
dubbed version on sound channel A (display: »Dual A«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1
Select »Sound type« with »P+« or »P-« and adjust the setting
with » « or » «.
Ǹ
Ƿ
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1
2
Select »Sound type« with »P+« or »P-«.
Press » « or » « to select the setting.
Ǹ
Ƿ
Automatic volume
The television channels broadcast at different volumes. The automa-
tic volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1
Select »AVL« with »P+« or »P-« and then select »On« with
« or » «.
»
Ǹ
Ƿ
Equaliser
The equaliser offers you four preset sound settings (Music, Sport,
Cinema and Dialogue) and one which you can create yourself
(User).
1
2
3
Select »Equalizer« with »P+« or »P-« and confirm with
»OK«.
– The »Equalizer« menu appears.
Equalizer
User
ĵ
Ł
12 dB
Select the audio setting »User« with »P+« or »P-« and confirm
with »OK«.
– The frequency band »120 Hz« is activated.
0 dB
-12 dB
Set the desired value with »P+« or »P-« and select the next
<120Hz 500Hz 1.5kHz 5kHz 10kHz>
frequency band with » « or » «.
Ǹ
Ƿ
Select
Back
Exit
OK
G
and edit
F
4
5
Press » « (blue) to save the setting.
F
Press » « (blue) to finish the settings.
Concluding the settings
Press »i« to finish the settings.
1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Basic functions
Switching on and off
1
Switch on the television by pressing the »IO« button on the tele-
vision set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
PIP
2
3
Press the »Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
z
Completely switch the television off by pressing »IO« on the
television set.
– This saves electricity.
Selecting channels
TXT
AV
POS
d
1
Use »1…0« to select channels directly.
SCAN
PAP
SIZE
2
Press »P+« or »P-« to move up and down channels.
VCR
DVD
SAT
Selecting AV channels
1
Call up the »Source table« menu with »AV«.
2
Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
Tele Pilot 160 C
3
Switch back to the television channel with »1…0«.
Adjusting the volume
1
Adjust the volume with » « or » «.
Ǹ
Ƿ
Muting
1
Use » « to switch the sound off (mute) and to switch it on
again.
p
Displaying time
1
You can display the time by pressing the »
channels with teletext).
Ȅ« button (only for
Displaying information
1
Press »-/--« to display the information.
– The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
frame of the current programme.
Ƿ
1
2
Press » « (yellow).
Ƿ
To quit this function, press » « again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Picture settings
You can select four different picture settings.
1
Select the desired picture setting from »User«, »Natural«,
z
»Rich« or »Soft« with »
«.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 10.
Audio settings
You can select six different audio settings.
1
Select the desired sound setting from »User«, »Music«, »Sport«,
»Cinema« or »Speech« with » «.
F
– You can alter the »User« sound settings, see the ”Equaliser”
chapter on page 11.
Zap function
This function allows you to save the television channel which you
are currently watching and switch to other channels (zapping).
1
Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by
pressing »Z«.
– The display »z 1« appears in the screen.
2
3
Change channels with »1…0« or »P+« »P-«.
You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching befo-
re.
4
Press »i« to quit the zap function.
– The display disappears.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Zoom function
This function enables you to enlarge the television or PC picture.
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »Picture« with »P+« or »P-« and press »OK« to
confirm.
– The »Picture« menu appears.
Picture
Noise reduction
Picture smart
H Position
V Position
Phase
Sharpest
Rich
3
Select »Brightness« with »P+« or »P-« and press »P+« again.
– »Zoom« is selected.
Auto position
Zoom
4
5
6
Press »OK« to activate the zoom function.
Select
Back
Exit
Press »P+« or »P-« to change the size of the picture.
OK
G
and edit
To change the picture section press »OK« and then » «, » «,
Ǹ Ƿ
»P+« or »P-« to select the section.
7
Press »i« to quit the zoom function.
– The display disappears.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Changing the picture format
The television automatically switches to the 16:9 format if this
format is detected via the Euro-AV socket.
1
Select the picture format with »
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:
«. The selected picture
E
»4:3« format
The picture is shown in 4:3 format.
»Auto« format
The picture format is automatically switched to »16:9« for 16:9
programmes.
For programmes in 4:3 format, the picture automatically fills the
screen.
»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizon-
tally if »16:9« or »14:9« is selected.
The picture geometry is stretched horizontally.
With actual 16:9 signal sources (from a set-top box on the Euro-AV
socket) the picture fills the screen completely and with the correct
geometry.
»Letterbox« format
The letterbox setting is especially suitable for programmes in 16:9
format.
The black borders which are usually at the top and bottom of the
screen are eliminated, 4:3 pictures fill the screen.
The transmitted pictures are enlarged, but are slightly cropped at
the top and bottom. The picture geometry remains unchanged.
The »Auto Letterbox« message appears for PAL Plus television
programmes.
»Panorama« format
This setting is suited to films with a large width/height ratio.
During programmes in 4:3 format the picture is stretched horizon-
tally if the »Panorama« function is selected. The picture geometry is
stretched horizontally.
»Subtitles« format
If you cannot read the subtitles which appear on the bottom of the
screen (especially during programmes with 4:3 format and if the
»Subtitles« format is selected), then select »Subtitles«.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
PIP mode
PIP (picture in picture) allows you to watch an inset picture from a
second picture source in addition to the current channel.
Other television stations, DVD players, video recorders or satellite
receivers can be used as video sources. They must be connected to
the input sockets on the back of the device.
Displaying the inset picture
1
To display the inset picture, press »PIP« once.
Double window
1
To activate the double window function (split screen), press
»PIP« twice.
– The last selected main and inset pictures are shown next to
each other.
Selecting the channels for the inset picture and
the right side of the screen (double window)
1
Press »P+« or »P-« to move up and down channel positions
one at a time.
Selecting the channels for the main picture and
the left side of the screen (double window)
1
Press »1…0« to select channels directly, or select the video
source (DVD player, video recorder, SAT receiver); then call the
»Source table« menu by pressing »AV«, select the desired AV
channel position with »P+« or »P-« and press »OK« to
confirm.
Swapping the main and inset pictures
1
Press »Z« to swap the main and inset pictures.
Changing the position of the inset picture
1
Press »POS« to move the inset picture.
Changing the size of the inset picture
1
Press »SIZE« to change the size of the inset picture.
Ending the PIP function
1
To hide the inset picture, press »PIP« twice.
Quitting the double window
1
To quit the double window, press »PIP«.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________________________
TELETEXT MODE
TOP text or FLOF text mode
1
Press »TXT« to switch to teletext mode.
2
You can directly select teletext pages with »1...0«.
PIP
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green and, depending on the station,
yellow and blue text field. Your remote control has buttons with
the corresponding colours.
z
z
3
4
5
6
7
Press »
« (red) to scroll back a page.
Press »
Ȅ
« (green) to scroll to the next page.
Ƿ
Press » « (yellow) to select chapters.
TXT
AV
POS
d
F
Press » « (blue) to select topics.
SCAN
PAP
SIZE
To switch off teletext, press »TXT« twice.
VCR
DVD
SAT
Normal text mode
1
2
3
4
5
Press »TXT« to switch to teletext mode.
You can directly select teletext pages with »1...0«.
Press »P-« to scroll back a page.
Tele Pilot 160 C
Press »P+« to scroll to the next page.
To switch off teletext, press »TXT« twice.
Additional functions
Skipping the waiting time
While a page is being searched for, you can switch to the television
channel.
1
2
Enter the teletext page number using »1…0« and then press
»POS«.
– As soon as the page is found, the page number is displayed.
Press »POS« to switch to the teletext page.
Increasing character size
If you have difficulty reading the text on the screen, you can double
the character size.
1
To enlarge the character size of a teletext page, press »–/––«
repeatedly.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________________________
TELETEXT MODE
Page stop
A multiple page may contain several sub-pages, which are automa-
tically scrolled by the transmitting station.
1
2
Stop the sub-pages with »
«.
E
PIP
Press »
« to quit the function.
E
Calling up a sub-page directly
If the selected teletext page contains further pages, the number
of the current sub-page as well as the total number of pages is
displayed.
z
1
2
3
Call up the sub-pages with »SIZE«.
Press »P-« to scroll back a page.
Press »P+« to scroll to the next page.
TXT
AV
POS
d
SCAN
PAP
SIZE
Reveal answer
VCR
DVD
SAT
Certain teletext pages contain ”hidden answers” or information
which can be called up.
1
2
Display information with »SCAN«.
Conceal information with »SCAN«.
Tele Pilot 160 C
Split screen (double window)
With this function you can see the television channel on the left and
the teletext page on the right.
1
2
To activate the window function, press »PAP«.
– The television channel and the teletext page appear next to
each other on the screen.
To deactivate the double window function, press »PAP«.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
______________
CONVENIENCE FUNCTIONS
Convenience functions with the »Features« menu
1
To open the »MAIN MENU« press »i«.
2
Select »Features« with »P+« or »P-« and confirm with »OK«.
Note:
Further operation is explained in the following sections.
Child lock
Features
Parental lock
VCR mode
On
If the child lock is activated, the buttons on the television are not
operable.
Menu language
AV2 output
Tv
Tv
0
1
2
Select »Parental lock« with »P+« or »P-«.
AV3 output
Sleep timer
Press » « or » « to activate or deactivate the child lock
Ǹ
Ƿ
(On or Off).
Press »i« to conclude the setting.
Select
Back
and edit
Exit
3
Changing the menu language
1
Select »Menu language« with »P+« or »P-« and confirm with
»OK«.
– The »Menu language« menu appears.
Features
Parental lock
VCR mode
On
Off
Menu language
AV2 output
Tv
Tv
0
2
3
Select the language with »P+«, »P-«, » « or » « and press
Ǹ
Ƿ
AV3 output
»OK« to confirm.
Sleep timer
Press »i« to finish the setting.
Select
Back
Exit
OK
G
and open
Entering the switch-off time for the sleep timer
You can enter a switch-off time. After this time has elapsed, the tele-
vision switches to standby mode.
1
2
3
Select »Sleep timer« with »P+« or »P-« and press »OK« to
confirm.
Features
Parental lock
VCR mode
On
Off
To enter the switch-off time (from 15 to 120 minutes), press
Menu language
AV2 output
Tv
Tv
»
« or » «.
Ǹ
Ƿ
AV3 output
Sleep timer
0
Press »i« to conclude the setting.
Select
Back
Exit
and edit
19
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
AV
AV
3
2
VIDEO
L
R
VIDEO
L
R
PC-DVI
AUDIO IN
ANT IN
S-VHS
PC-IN
DVI-D
AV-4
AV OUT
AC IN
Decoder
PAY-TV
1
Connect the »AV1« socket on the television set and the appropriate
socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
1
Switch on the television and the decoder.
2
Press »AV«, select the channel »AV1« with »P+« or »P-« and
press »OK« to confirm.
Video recorder, DVD player or SET-TOP box
Connecting the video recorder, DVD player or
SET-TOP box
AV
AV
3
1
VIDEO
L
R
VIDEO
L
R
PC-DVI
AUDIO IN
ANT IN
S-VHS
PC-IN
DVI-D
AV-4
AV OUT
AC IN
AUDIO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
EURO
AV
TV
110-240
V
W
~
/0Hz 20
R
S
VIDEO OUT
1
Connect the »AV2« or »AV3« sockets on the television and the
corresponding sockets of the video recorder, DVD player or the
set-top box with a Euro-AV (Scart) cable.
or
20
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
1
Connect the »PC IN« socket on the television to the corre-
sponding cinch sockets on the DVD players or the set-top box
using the adapter cable supplied (VGA – YUV) (video signal).
2
Connect the »PC-DVI AUDIO IN« socket on the television to
the corresponding sockets on the DVD player or set-top box a
cinch cable (audio signal).
Using a video recorder, DVD player or SET-TOP box
1
Switch on the video recorder, DVD player or SET-TOP box and
select the function you wish to use.
2
Press »AV«, select the channel »AV2«, » AV3« or »YPBPR«
(YUV) with »P+« or »P-« and press »OK« to confirm.
– You can hear and see the video and audio information from
the video recorder or the SET-TOP box on the television set.
Connecting the SVHS video recorder
If you own a SVHS video recorder, you can connect it using a
SVHS cable to the »S-VHS« socket.
Using a SVHS video recorder
1
Switch on the video recorder and select the function you wish
to use.
2
Press »AV«, select the channel »SVHS« with »P+« or »P-« and
press »OK« to confirm.
– You will see the picture and hear the sound of the video
recorder on the television.
Switching VCR mode on/off
The AV time constant is adapted to video recorder operation.
1
2
3
Press »AV«, select the channel with the connected VCR with
»P+« or »P-« and press »OK« to confirm.
Features
Parental lock
VCR mode
On
Call up the »MAIN MENU« menu with »i«.
– The »MAIN MENU« menu appears.
Off
Menu language
AV2 output
Tv
Tv
0
Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
AV3 output
Sleep timer
4
5
Select »VCR mode« with »P+« or »P-« and select »On« with
Select
Back
Exit
»
Ǹ
« or » «.
Ƿ
and edit
Press »i« to conclude the setting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Selecting the signal for the Euro-AV (Scart) output
With this setting you select whether the television channel or the
audio/video will be transmitted via the Euro-AV socket AV3 or AV2.
This enables you to transmit recordings from one external device
(e.g. a DVD player) to another using the television. Connect the
playback device to Euro-AV socket AV2 and the recording device to
Euro-AV socket AV3 and in the »Special functions« menu, select the
required setting:
– AV2 output:
»TV« – the television channel that you are viewing or
»AV3« – the audio/video signal from Euro-AV socket AV3);
– AV3 output:
»TV« – the television channel that you are viewing or
»AV2« – the audio/video signal from Euro-AV socket AV2);
Features
1
2
Call up the »MAIN MENU« menu with »i«.
Parental lock
VCR mode
On
Off
Menu language
AV2 output
Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
TV
AV3 output
Tv
0
Sleep timer
3
4
5
Select »AV2 output« or »AV3 output« with »P+« or »P-«.
Select
Back
Exit
Select the desired option with » « or » «.
Ǹ
Ƿ
and edit
Press »i« to conclude the setting.
Headphones
Connecting headphones
1
Insert the headphone jack (3.5 mm ø jack plug) in the headpho-
ne socket on the bottom.
R
PC-DVI
AUDIO IN
S-VHS
PC-IN
DVI-D
AC IN
Selecting the sound settings for the headphones
1
2
3
Press »i« to open the »MAIN MENU«.
Select »Sound« with »P+« or »P-« and confirm with »OK«.
Select »Headphones« with »P+« or »P-« and confirm with
»OK«.
Headphones
Volume
Balance
Sound type
Bass
30
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Soundtype«
Stereo
with »P+« or »P-« and set with » « or » «.
Ǹ
Ƿ
Treble
Press »i« to finish the setting.
Select
Back
Exit
OK
G
and edit
22
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Camcorder
Connecting the camcorder
AV
AV
AV
3
2
1
1
Connect the yellow socket »AV4 Video« on the television and
the corresponding socket on the camcorder (VHS, Video 8) with
a cinch cable (picture signal)
VIDEO
L
R
VIDEO
L
R
ANT IN
AV
AV OUT
or
connect the »S-VHS« socket (picture signal) on the television
and the corresponding socket on the camcorder (S-VHS, Hi 8)
with a cinch cable.
2
Connect the white and red sockets »AV4 LR« on the television
and the corresponding sockets on the camcorder with a cinch
cable (audio signal).
Note:
If a mono camera is connected, connect the white socket
»AV4 L« on the television and the corresponding socket on the
camera. Select »Mono« in the »Sound« menu for mono operati-
on.
Operating with a camcorder
1
Switch on the camcorder, insert a cassette and start playback.
2
Press »AV«, select the »AV4« or SVHS« channel with »P+« or
»P-« and press »OK« to confirm.
– You will see the picture and hear the sound of the camcorder
on the television.
HiFi system
Connecting the HiFi system
AV
AV
AV
3
2
1
VIDEO
L
R
VIEO
PC-DVI
AUDIO IN
ANT IN
S-VHS
PC-IN
DVI-D
AV-4
AV UT
AC IN
WT–A
1
Connect the white and red sockets »AV OUT L R « on the tele-
vision and the corresponding sockets on the HiFi with a cinch
cable.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
__________________________
PC MONITOR MODE
Connecting a PC
AV
AV
AV
3
2
1
VIDEO
L
AV -
R
VIDEO
L
R
PC-VI
AUDIN
ANT IN
S-VHS
DVI-D
4
AV OUT
AC IN
1
2
Connect the socket »PC IN« or »DVI-D« on the television to
the corresponding socket on the PC using a VGA cable.
Connect the socket »PC-DVI AUDIO IN« on the television to
the corresponding socket on the PC using a cinch cable (audio
signal).
Selecting the channel position for the PC
1
Press »AV«, select the »PC« or »DVI« channel with »P+« or
»P-« and press »OK« to confirm.
Picture
Brightness
Contrast
39
Colour
Settings for the PC
Sharpness
Hue
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
Noise reduction
Picture smart
Sharp
User
2
Select »Picture« with »P+« or »P-« and press »OK« to
confirm.
Select
Back
Exit
OK
G
and edit
– The »Picture« menu appears.
3
4
Select »Brightness« with »P+« or »P-« and press »P+« again.
– The second page of the picture menu appears.
Picture
Noise reduction
Picture smart
H Position
V Position
Phase
Sharp
Rich
Press »P+« or »P-« to select the function or setting.
– Options:
»H Position« – adjust the horizontal picture position
»V Position« – adjust the vertical picture position
»Phase« – removes horizontal flicker, blurring and horizontal
lines
Auto position
Zoom
Select
Back
Exit
OK
G
and open
»Auto position« – for automatic adjustment to the PC
5
6
Press »OK« to activate the function and » « or » « to adjust.
Ǹ
Ƿ
Press »i« to finish the setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________
SPECIAL SETTINGS
Setting television channels
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
Setup
1
2
3
4
5
Press »i« to open the »MAIN MENU«.
ATS
– The »MAIN MENU« appears.
Installation
Program table
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Select
Back
Exit
OK
G
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
and open
Select »Program no« with »P+« or »P-« and set the preset
Installation
channel with » « or » «.
Ǹ
Ƿ
Program no
System
Channel
Band
1
B/G
6
Select »Search« with »P+« or »P-« and start the search with
« or » «.
»
Ǹ
Ƿ
C
Search
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Fine tuning
Store
Select
Back
Exit
and edit
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Installation
Ǹ
Ƿ
Program no
System
Channel
Band
1
6
7
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
B/G
6
C
Note:
Search
Fine tuning
Store
To set other television stations, repeat steps 3 to 6.
Press »i« to finish the setting.
Select
Back
Exit
OK
G
and edit
25
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________
SPECIAL SETTINGS
Fine tuning television channels
The television automatically tunes itself to the best possible recepti-
on. You may need to carry out manual fine tuning in areas where
there is poor reception.
1
2
3
4
5
6
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Installation
Program no
System
Channel
Band
1
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
B/G
6
C
Search
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
Fine tuning
Store
Select »Fine tuning« with »P+« or »P-« and set it with »
«
Ǹ
Select
Back
Exit
and edit
or » «.
Ƿ
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Press »i« to finish the setting.
Setting the television channels by entering the
channel numbers
1
2
3
4
Press »i« to open the »MAIN MENU«.
Setup
– The »MAIN MENU« appears.
ATS
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Installation
Program table
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
Select
Back
Exit
OK
G
and open
Select »Program no« with »P+« or »P-« and set the preset
channel with » « or » «.
Ǹ
Ƿ
Installation
Program no
System
Channel
Band
1
5
6
Select »Channel« with »P+« or »P-«.
B/G
6
Press » « or » « to switch up and down channels or use
Ǹ
Ƿ
C
»1…0« to enter the channel number directly.
Search
Fine tuning
Store
7
8
Select »Band« with »P+« or »P-«.
Press » « or » « to choose between »S« (special channel)
Ǹ
Ƿ
Select
Back
Exit
and »C« (channel).
and edit
Note:
Installation
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Program no
System
Channel
Band
1
B/G
6
Ǹ
Ƿ
C
9
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Search
Fine tuning
Store
Note:
Select
Back
Exit
To set the other television stations, repeat steps 3 to 9.
OK
G
and edit
10 Press »i« to finish the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
______________________________
SPECIAL SETTINGS
Re-tuning all television channels
You can re-tune all the television stations, for example if you move
to another town.
Setup
ATS
1
2
Press »i« to open the »MAIN MENU«.
Installation
Program table
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Select
Back
Exit
OK
G
and open
3
Select »ATS« with »P+« or »P-« and confirm with »OK«.
– The »ATS« menu appears.
4
5
Press » « or » « to select the country.
Ǹ
Ƿ
ATS
United Kingdom
Country
Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«.
Autoprogram
– A warning message appears.
Select
Back
Exit
and edit
6
Press »Ȅ« (green) to start the search.
– The search begins. It may last a few minutes, depending on
the number of television stations found.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »OK«.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Technical data
Operating voltage: 230 V, 50/60 Hz
Power consumption: in operation 110 W
in standby approx. 4 W (Vision 26)
in operation 129 W
in standby approx. 4 W (Vision 32)
Sound output:
2 x 10 watts music (2 x 7 sine wave)
(Vision 26)
2 x 14 watts music (2 x 10 sine wave)
(Vision 32)
Reception range:
Preset channels:
Screen size:
C01 … C80, special channels S01 … S41
99 and 7 AV (Vision 26, Vision 32)
68 cm/26” (Vision 26)
82 cm/32” (Vision 32)
Viewing angle:
Contrast ratio:
170° hor./170° vert.
600:1 (Vision 26)
700:1 (Vision 32)
2
Brightness:
450cd/m (Vision 32)
2
500cd/m (Vision 26)
Max. resolution:
WXGA 1280 x 768 (Vision 26)
WXGA 1366 x 768 (Vision 32)
Service information for dealers
The television set may only be operated with the mains adapter sup-
plied.
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within
defined voltage ranges. 89/336/EEC directive on electromagnetic
compatibility.
The device complies with the following standards: EN 60065,
EN 55013, EN 55020
Subject to alteration and correction!
28
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Troubleshooting
If the remedies given below do not work, please consult an authori-
sed GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satel-
lite receivers.
Fault
Possible cause
Remedy
Screen lit (snow), but no
station
Antenna cable
Is the antenna cable
connected?
No television station pro-
grammed
Start the station search
Poor picture contrast
Picture settings incorrectly Adjust the brightness,
set
contrast or colour setting
Problem at station
Test with another channel
Interference to picture
and/or sound
Interference from other
devices
Change the position of the
device
Ghosts, reflection
Channel setting
Automatic or manual chan-
nel setting/fine tuning
Antenna
Have antenna cable or
system checked
No colour
Colour intensity at minimum Turn up the colour
TV standard setting (if Select the correct colour
setting option is available) standard
Problem at station
Test with another channel
Picture but no sound
Volume set to minimum
Turn up or switch on the
volume
Problem at station
Test with another channel
Teletext missing or faulty
Television station (has no
Test another channel for
teletext) or antenna system fine tuning and ghosts
Station signal too weak
No optical connection
Check the antenna system
Remote control does not
work
Point the remote control at
the television set
Remote control batteries
Check the batteries, change
if necessary
Operating condition unde- Switch off the television
fined
with the main power button
for approximately
2 minutes
The picture is dark after
switching on
Parental lock has been
activated
Switch off the parental lock
29
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains
supply.
The range of multi-system receivers is built to work in most European coun-
tries. However, the mains plug and socket system for the UK differs from
many European countries.
This appliance has been supplied with a fitted, non-removable, approved
converter plug for use in the UK. This converter plug is fitted with a 5A rated
fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut off and immediately
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a
qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock
hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any
other type of plug is used it must be protected by a 5A fuse either in the
plug, or at the distribution board. If this type of plug becomes defective,
ensure that the fuse is removed before disposal, to eliminate potential shock
hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct
type and rating (5A ASTA or BSI approved BS1362) must be used and the
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and
plug must not be used until a replacement is obtained. Replacement fuse
covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo-
wing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor-
respond with the coloured marking identifying terminals in your plug, pro-
ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N”
or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the let-
ter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal mar-
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-
low.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
|