model t25227
oscillating multi-tool
oWner's manual
(For models manufactured since 09/13)
Copyright © SEptEMBEr, 2013 By grizzly induStrial, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#dM15915 printEd in China
Download from Www.Somanuals.com. All Manuals Search And Download.
table of contents
section 1: safety.......................................................................................................2
Safety instructions for power tools............................................................................2
additional Safety for oscillating tools........................................................................4
section 2: introduction .........................................................................................5
Foreword.....................................................................................................................5
Specifications..............................................................................................................5
section 3: setup.........................................................................................................6
unpacking...................................................................................................................6
inventory.....................................................................................................................6
assembly ....................................................................................................................7
test run .....................................................................................................................8
section 4: operations.............................................................................................9
Variable-Speed dial....................................................................................................9
Multi-tool use.............................................................................................................9
Sanding ....................................................................................................................10
Sawing/Cutting..........................................................................................................11
Scraping....................................................................................................................11
section 5: accessories.........................................................................................12
section 6: maintenance ........................................................................................14
Schedule...................................................................................................................14
Cleaning....................................................................................................................14
section 7: service...................................................................................................15
troubleshooting........................................................................................................15
section 8: parts.......................................................................................................16
Warranty ...................................................................................................................17
Download from Www.Somanuals.com. All Manuals Search And Download.
section 1: safety
for your own safety read instruction manual
before operating this power tool
the purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. this manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. the
progression of symbols is described below. remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
indicates an imminent hazardous situation which, if
not avoided, Will result in death or serious injury.
indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
it may also be used to alert against unsafe practices.
this symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
NOTICE
safety instructions for power tools
oWner’s manual. read and under- mental alertness reQuired. Full
mental alertness is required for safe
operation of power tools. never operate
under the influence of drugs or alcohol,
when tired, or when distracted.
stand this owner’s manual BEForE using
machine.
trained operators only. untrained
operators have a higher risk of being hurt
or killed. only allow trained/supervised
people to use this power tool. When tool
is not being used, disconnect power, and
store in out-of-reach location to prevent
unauthorized use—especially around chil-
dren. Make workshop kid proof!
disconnect poWer first. always
disconnect tool from power supply
BEForE making adjustments, chang-
ing tooling, or servicing machine. this
prevents an injury risk from unintended
startup or contact with live electrical
components.
dangerous environments. do not
use tools in areas that are wet, cluttered,
or have poor lighting. operating tools in
these areas greatly increases risk of acci-
dents and injury.
eye protection. always wear anSi-
approved safety glasses or a face shield
when operating or observing machinery
to reduce the risk of eye injury or blind-
ness from flying particles. Everyday eye-
glasses are not approved safety glasses.
-2-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
electrical safety. tool plug must securing
WorKpiece.
When
match outlet. double-insulated tools have required, use clamps or vises to secure
a polarized plug (one blade is wider than workpiece. this protects hands and frees
the other), which must be plugged into a both of them to operate tool.
polarized outlet. never modify plug. do
not use adapter for grounded tools. use guards & covers. guards and cov-
a ground fault circuit interrupter if opera- ers reduce accidental contact with mov-
tion is unavoidable in damp locations. ing parts or flying debris. Ensure they
avoid touching grounded surfaces when are properly installed, undamaged, and
operating tool.
working correctly.
Wearing proper apparel. do not children & bystanders. Keep chil-
wear clothing, apparel or jewelry that dren and bystanders at a safe distance
can become entangled in moving parts. from the work area. Stop using tool if they
always tie back or cover long hair. Wear become a distraction.
non-slip footwear to avoid accidental
slips, which could cause loss of workpiece use recommended accessories.
control. Wear hard hat as needed.
Consult this manual or manufacturer
for recommended accessories. using
hazardous dust. dust created while improper accessories will increase risk of
using tools may cause cancer, birth
serious injury.
defects, or long-term respiratory damage.
Be aware of dust hazards associated with maintain With care. Keep cutting
each workpiece material, always wear tool edges sharp and clean. Follow all
a nioSh-approved respirator, and con- maintenance instructions and lubrication
nect tool to an appropriate dust collection schedules to keep tool in good work
device to reduce your risk. ing condition. a tool that is improperly
maintained could malfunction, leading to
-
hearing protection. always wear serious personal injury or death. only
hearing protection when operating or have tool serviced by qualified service-
observing loud machinery. Extended personnel using matching replacement
exposure to this noise without hearing parts.
protection can cause permanent hearing
loss.
checK damaged parts. regularly
inspect tool for any condition that may
remove adJusting tools. never affect safe operation. immediately repair
leave adjustment tools, chuck keys,
or replace damaged or mis-adjusted parts
wrenches, etc. in or on tool—especially before operating tool.
near moving parts. Verify removal before
starting!
maintain poWer cords. When dis-
connecting cord-connected tools from
intended usage. only use tool for its power, grab and pull the plug—not the
intended purpose. never modify or alter cord. Carrying or pulling the cord may
tool for a purpose not intended by the damage wires inside. do not handle cord/
manufacturer or serious injury or death plug with wet hands. avoid cord damage
may result!
by keeping it away from heated surfaces,
high traffic areas, harsh chemicals, sharp
aWKWard positions. Keep proper edges, moving parts, and wet/damp loca-
footing and balance at all times when tions. damaged cords increase risk of
operating tool. do not overreach! avoid electrocution.
awkward hand positions that make tool
control difficult or increase the risk of unattended operation. never
accidental injury.
leave tool running while unattended. turn
tool OFF and ensure all moving parts
safe handling. Firmly grip tool. to completely stop before walking away.
avoid accidental firing, do not keep finger
on switch or trigger while carrying.
eXperiencing difficulties. if at
any time you experience difficulties per-
forcing tools. use right tool for job, forming the intended operation, stop
and do not force it. it will do job safer and using the machine! Contact our technical
better at rate for which it was designed.
Support at (570) 546-9663.
T25227 (Mfg. since 09/13)
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
additional safety for oscillating tools
eye protection. Sanding/cutting spindle flange. a lways use the
causes small particles to become air- included mounting washer with the
borne at a high rate of speed. alWayS machine when mounting accessory tools.
wear safety glasses when using this tool. other washers may not properly secure
accessories and cause an accident.
cracKed accessories. Cracked
tooling accessories may break and fly fire/eXplosion hazard. Cutters/
apart during operation or cause kickback. scrapers are capable of creating sparks,
inspect for damage before each use. do which can ignite flammable materials.
not use damaged tooling accessories.
Keep clear of flammable materials when
using accessory tools.
hand/tool contact. oscillating tools
have the capability of cutting or removing tool stability. hold tool with both
a lot of skin fast. always maintain a firm hands, and stabilize yourself against a
grip on the tool. Wear close fitting work fixed object. using one hand without sup-
gloves whenever possible to avoid injury.
port increases risk of the tool grabbing
workpiece and causing loss of grip, lead-
lung protection. Sanding/cutting ing to serious personal injury.
produces hazardous dust, which may
cause long-term respiratory problems if risK of electric shocK. Cutting
inhaled. always wear a nioSh approved into walls or workpieces with hidden wiring
dust mask or respirator when sanding or can result in shock or electrocution. use a
cutting.
metal detector check for hidden gas and
water lines prior to cutting into blind work -
hidden pipping. use a metal detector space such as walls or columns.
check for hidden gas and water lines prior
to cutting into blind workspace such as Wet sanding. never wet sand with this
walls or columns. Cutting into gas lines multi-tool. Wet sanding with this multi-tool
may cause explosion. Cutting into water could result in electrocution.
lines may result in electrocution.
obstructions. Check for obstruc-
insulated grips. use insulated grip tions such as nails or screws in scraping
surfaces while operating oscillating tool to or cutting path. obstructions can cause
prevent shock or electrocution in case of kickback resulting in injury or damage to
contact with an electrical wire.
workpiece.
prolonged use. prolonged use of
multi-tool can result in nerve damage from
vibration. Wear protective gloves and take
breaks using multi-tool.
hand protection. Wear gloves while
operating multi-tool and changing acces-
sories to protect against burning or cut-
ting.
-4-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
section 2: introduction
foreword
contact info
We are proud to offer this manual with your
new oscillating multi-tool! We've made
every effort to be exact with the instruc-
tions, specifications, drawings, and pho-
tographs of the multi-tool when writing
this manual. however, sometimes we still
make an occasional mistake.
We stand behind our machines. if you
have any service questions, parts requests
or general questions about the machine,
please call or write us at the location listed
below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
also, owing to our policy of continuous
improvement, your multi-tool may not
exactly match the manual. if you find this
to be the case, and the difference between
the manual and multi-tool leaves you in
doubt, check our website for the latest
manual update or call technical support
for help.
phone: (570) 546-9663
E-Mail: techsupport@grizzly.com
We want your feedback on this manual.
if you can take the time, please email or
write to us at the address below and tell
us how we did:
For your convenience, we post all avail-
able manuals and manual updates for free
on our website at www.grizzly.com. any
updates to your model of machine will be
reflected in these documents as soon as
they are complete.
grizzly industrial, inc.
C/o technical documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
Email: manuals@grizzly.com
specifications
power requirement.....................................................................120V, Single-phase, 60 hz
Full load Current rating.................................................................................................1.8a
Sanding pad Size............................................................................................................. 35⁄8
oscillations per Minute..........................................................................15,000–22,000 opM
"
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
-5-
section 3: setup
unpacking
inventory
this multi-tool was carefully packaged for
safe transportation. remove the packag-
ing materials from around your machine
and inspect it. if you discover any damage,
please immediately call Customer Service
at (570) 546-9663 for advice.
model t25227 inventory
Qty
a. Carrying Case....................................1
b. oscillating tool ..................................1
c. hex Wrench 6mm..............................1
d. Mounting Washers 26 & 18mm ... 1 Ea
e. M8-1.25 x 12mm Cap Screw.............1
Save the containers and all packing mate-
rials for possible inspection by the car-
rier or its agent. otherwise, filing a freight
claim can be difficult.
a
When you are completely satisfied
with the condition of your shipment,
inventory the contents.
B
E
C
d
if any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expedi-
ency, replacements can be obtained at
your local hardware store.
figure 1. tool inventory.
f. White Sanding pads ..........................5
g. red Sanding pads.............................5
h. Wood and Metal Saw Blades ...... 1 Ea
i. Sanding attachment...........................1
J. Scraper ..............................................1
K. radial Saw Blade ..............................1
F
i
g
J
h
K
this tool presents serious injury
hazards to untrained users. read
through entire manual to become
familiar with the controls and opera-
tions before using!
figure 2. accessories inventory.
-6-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
5. put the accessory washer over the
accessory tool (small for the sanding
accessory or large for all other acces-
sories), aligning the washer hole with
the flange hole. Make sure the convex
side of the washer is facing down.
assembly
the t25227 oscillating Multi-tool comes
with several accessory tools for a variety
of jobs. With the groove and rivet design,
each accessory tool can be mounted in
12 different directions. Choose the most
effective direction to complete the job con-
sidering stability and safety.
6. using the provided 6mm hex wrench,
firmly secure the accessory with the
cap screw (see figures 4-5).
Select the right accessory tool for the job.
prior to attaching, carefully inspect the
accessory for cracks, chips or other dam-
age. do not use tools that have been
damaged.
Concave
Side down
attachment
tool
assembly
order
to install tool accessories:
1. diSConnECt tool FroM poWEr!
figure 4. attachment tool assembly order.
Secured accessory
2. lay the multi-tool tool on a flat surface
with the tool flange facing upward (see
figure 3).
Spindle Flange rivets
figure 5. accessory secured to tool.
figure 3. Flange rivets for aligning
accessory grooves.
3. remove dust and debris from the cap
screw, flanges, and accessories.
4. place the accessory of choice onto
the tool flange at the desired direc-
tion, aligning the rivets of the tool
flange with the grooves of the acces-
sory (see figure 3).
T25227 (Mfg. since 09/13)
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
3. using your free hand, rotate the
variable-speed dial to ensure speed
increases/decreases as the dial is
moved.
test run
prior to using the multi-tool for the first
time, perform this test run procedure to
ensure it functions properly.
— if operating correctly, the multi-
tool will continue running when the
switch is pressed forward, and the
speed will increase when the speed
dial is rotated towards 6.
to test run multi-tool:
1. Connect the tool to power.
2. While firmly holding multi-tool tool,
push the switch forward to turn it ON.
— if the multi-tool does not start and
continue to run when the switch
is pressed forward, or the speed
does not increase/decrease when
the speed dial is rotated, then the
multi-tool is not working properly.
diSConnECt it from power and
contact tech Support to resolve the
problem before using it any further.
-8-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
section 4: operations
to perform a typical operation:
1. diSConnECt Multi-tool FroM
lung/eye inJury
hazard!
poWEr!
Wear a respirator
and safety glasses
when using this
tool.
2. install appropriate accessory tool for
the operation (refer to assembly sec-
tion on page 12).
accidental
start hazard!
disconnect power
before servicing
or changing
3. put on safety glasses and a respirator.
4. Connect the multi-tool to power.
5. Firmly hold multi-tool, turn ON, and
adjust speed dial as necessary for job.
accessories.
6. While maintaining a balanced position,
complete the operation with both hand
on the multi-tool to ensure proper con-
trol.
variable-speed dial
the variable-speed dial adjusts the multi-
tool between 15,000 and 22,000 oscilla-
tions per minute (opM). the speed dial
can be set before starting the tool or while
in use.
— if working on a small workpiece
that could shift during operation and
cause a loss of control, secure it with
clamps or a vise.
— if working on a wall or other object
that may have wiring, pipes, or other
flammable pressurized material
inside, inspect it carefully to ensure
you know what is on the other side
of the cut.
multi-tool use
the purpose of this overview is to provide
the novice machine operator with a basic
understanding of how the machine is used
during operation, so the machine controls/
components discussed later in this manual
are easier to understand.
due to the generic nature of this over-
view, it is not intended to be an instruc-
tional guide. to learn more about specific
operations, read this entire manual and
seek additional training from experienced
machine operators, and do additional
research outside of this manual by read-
ing "how-to" books, trade magazines, or
websites.
T25227 (Mfg. since 09/13)
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
tips for sanding:
sanding
•
practice on similar scrap material
and inspect results before working on
intended workpiece.
use the 35⁄8" triangular platen accessory
and either a red or white sanding pad.
•
adjust speed according to materi-
al type. using high speed removes
material quickly and can result in non-
uniform surfaces.
the sanding pads use a hook-and-loop
system, which provides easy attachment
and removal. to install the sanding pad,
align the pad with the platen and press on
firmly (see figure 6).
•
•
use sweeping side-to-side motions
with uniform pressure and speed.
Sanding pad
Check sanding pads for wear and dust
accumulation between jobs. Clean or
replace sanding pads as necessary.
Sanding
platen
figure 6. attaching sanding pad.
-10-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
sawing/cutting
scraping
this multi-tool comes with a scraper for
scraping off fixed adhesives.
always inspect back/inside of mate-
rial to be cut for electrical wiring,
pipes, or other flammable or pres-
surized material. failure to do so
could result in serious injury or
death.
tips for scraping:
•
•
•
use light-to-medium pressure to avoid
breaking or gouging workpiece.
using excessive force will decrease
the life of the multi-tool motor.
this multi-tool comes with wood and metal
saw blades and a radial saw blade for cut-
ting a variety of materials.
Keep scraper parallel with the
workpiece.
tips for sawing/cutting:
•
•
practice on similar scrap material
and inspect results before working on
intended workpiece.
use light-to-medium pressure when
cutting to prevent burning workpiece
or damaging multi-tool motor from
overloading.
•
•
do not use excessive force when mak-
ing cuts. if blades do not cut through
material with light-to-moderate pres-
sure, select an appropriate blade for
the material or replace the blade if it
has become dull.
For best results, mark the cutting path
with a pencil, crayon, or chalk line
before beginning the cut.
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
-11-
section 5: accessories
t25148—11⁄8" flush cut saw blade
Flush-Cut Saw Blades are ideal for wood
and metal and feature a fine tooth count for
smooth cuts.
t25159—35⁄8" sanding pad
Sanding pad features micro-hook and loop
fastening system for quick and easy sand-
ing sheet changes.
figure 9. Sanding pad.
figure 7. Flush-cut saw blade.
t25160—31⁄8" diamond coated rasp
these rasps are ideal for removing mortar
or tile adhesive when getting rid of dam-
aged tile as well as removing carpet adhe-
sive from hard surfaces. also for rough
grinding wood, stone, and concrete.
t25151—37⁄16" hss radial saw blade
Constructed of high speed steel (hSS).
Cuts wood and metal, or can be used as a
radial saw blade for flush cutting.
figure 8. radial saw blade.
figure 10. diamond coated rasp.
-12-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
t25150—carbide grit saw blade
t25139—211⁄16" pushcut saw blade
the precision push-Cut Wood Blades
have CrV hardened ground and side set
teeth for precise, clean, and quick cutting.
this 29⁄16" blade offers a carbide grit edge .
Cuts tile, plaster, porous concrete, or
rough grinds wood, stone, and concrete.
figure 11. Carbide grit saw blade.
figure 13. pushcut saw blade.
t25158—29⁄16" grout/mortar remover
grout and Mortar remover combines a
segment blade with a triangle blade in a
drop-shape design. Can be used to rout
out damaged tile and rasp away mortar
or tile adhesive without changing the tool.
t25156 2" flexible scraper
Flexible Scrapers are ideal for removing
soft adhesives, paint residue, and silicone
caulk.
figure 14. Flexible scraper.
figure 12. grout and mortar remover.
T25227 (Mfg. since 09/13)
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
section 6: maintenance
cleaning
!
Cleaning the Model t25227 is relatively
easy and should be done daily to prevent
build up of dust and resins.
use an air hose or vacuum to remove
excess wood chips and dust from the ven-
tilation openings (see figure 15).
always
disconnect
poWer
before servicing, adjusting, or doing
maintenance to reduce the risk of
accidental injury or electrocution.
use a dry rag to wipe off the remaining
dust and debris from the tool flange and
any accessories used.
never submerge tool in liquid or
clean with flammable solvents.
electrocution or fire may result,
causing serious injury or death.
Ventilation
opening
schedule
figure 15. Ventilation opening.
For optimum performance from your multi-
tool, follow this maintenance schedule and
refer to any specific instructions given in
this section.
daily check:
•
•
•
•
loose mounting bolts.
Worn switch.
Worn or damaged cord.
any other unsafe condition.
-14-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
section 7: service
troubleshooting
symptom
possible cause
solution
Multi-tool does not 1. power supply circuit breaker 1. Ensure circuit is sized cor-
start.
tripped or blown.
rectly and free of shorts.
reset circuit breaker or
replace fuse.
2. on/oFF switch at fault.
3. Motor at fault.
4. Motor brushes at fault.
2. replace switch.
3. test/repair/replace motor.
4. remove/replace brushes.
poor workpiece fin- 1. oscillation speed too high 1. reduce oscillation speed.
ish results.
resulting in workpiece burn
marks when cutting.
2. Bad angle or too much force 2. reduce pressure used for
resulting in gouges or ripping
of workpiece when scraping.
scraping and keep tool par-
allel with workpiece.
3. uneven finished surface when 3. reduce the speed and
sanding.
maintain uniform pressure
with long sweeping motions.
4. incorrect blade or accessory 4. use correct accessory for
for job. task.
Multi-tool chatters
and/or does not cut
straight.
1. accessory not secured prop- 1. re-align accessory grooves
erly.
with rivets on spindle flange
and secure.
Multi-tool perform-
ing slower and/or
finished product
1. Blade has become dull.
2. Sanding pad has worn thin.
3. Failing motor brushes.
1. replace blade.
2. replace sanding pad.
3. remove/replace brushes.
results diminishing.
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
-15-
section 8: parts
11
47
48
10
49
42
12
15
14
17
16
43
9
13
44
18
8
19
7
45
6
46
20
5
24
21
4
25
52
22
3
23
26
34
33
2
27
28
51
53
31
35
32
1
29
30
38
40
50
39
36
37
REF PART #
41
REF PART #
DESCRIPTION
DESCRIPTION
1
PT25227001 CAP SCREW M8-1.25 X 12
PT25227002 MOUNTING WASHER 26MM
PT25227003 SPINDLE
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
PT25227028 MOTOR CARBON BRUSH 2-PC SET
PT25227029 RIVET
2
3
PT25227030 ON/OFF SWITCH
4
PT25227004 BUSHING (RUBBER)
PT25227005 EXT RETAINING RING 26MM
PT25227006 SPLINE LOCK WASHER
PT25227007 BALL BEARING 6000ZZ
PT25227008 OSCILLATING FORK
PT25227009 BUSHING (BRONZE)
PT25227010 PHLP HD SCR M4-.7 X 30
PT25227011 FRONT HOUSING
PT25227012 EXT RETAINING RING 5MM
PT25227013 BALL BEARING 625ZZ
PT25227014 GASKET
PT25227031 CORD CLIP
5
PT25227032 PHLP HD SCR M4-.7 X 14
PT25227033 REAR HOUSING (RH)
PT25227034 PHLP HD SCR M4-.7 X 25
PT25227035 PHLP HD SCR M4-.7 X 22
PT25227036 RHEOSTAT BRACKET
PT25227037 PHLP HD SCR M3-.5 X 8
PT25227038 CORD STRAIN RELIEF
PT25227039 POWER CORD 18G 2C 48" 1-15P
PT25227040 RHEOSTAT ASSEMBLY
PT25227041 VENT SCREEN
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PT25227015 BEARING SEAT
PT25227042 SCRAPER TOOL
PT25227016 BALL BEARING 608ZZ
PT25227017 OSCILLATING RING
PT25227018 ARMATURE
PT25227043 SAW BLADE FOR WOOD
PT25227044 SAW BLADE FOR METAL
PT25227045 SANDING PLATEN ATTACHMENT
PT25227046 RED SANDING PAD
PT25227047 WHITE SANDING PAD
PT25227048 HEX WRENCH 6MM
PT25227049 RADIAL SAW BLADE
PT25227050 REAR HOUSING (LH)
PT25227051 MOUNTING WASHER 18MM
PT25227052 ID LABEL
PT25227019 BALL BEARING 607ZZ
PT25227020 BEARING SEAT (RUBBER)
PT25227021 STATOR MOUNT
PT25227022 PHLP HD SCR M4-.7 X 50
PT25227023 STATOR
PT25227024 BRACE
PT25227025 CONNECTION LINK
PT25227026 MIDDLE HOUSING
PT25227027 MOTOR BRUSH HOLDER
PT25227053 GRIZZLY LOGO LABEL
-16-
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue
you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the carton. We
will not accept any item back without this number. Proof of purchase must accompany the merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
T25227 (Mfg. since 09/13)
Download from Www.Somanuals.com. All Manuals Search And Download.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
|