MODEL H8361/H8362
60"/ 72"SUPER HEAVY-
DUTY WORKBENCHES
INSTRUCTIONS
Introduction
F
Sized to fit the needs of any shop, these work-
benches feature laminated birch construction for
strength and stability.
E
A
B
Specifications
H8361
Construction .............................. Laminated Birch
Shipping Weight .....................................248 lbs.
Dimensions ............................60"L x 30"W x 3"T
Table Height Above Floor ..............................38"
C
D
Figure 1. Model H8361/H8362 inventory.
Tail Vise Width ............................................143⁄4
"
Tail Vise Max. Capacity....................................7"
H8362
Model H8361
Construction .............................. Laminated Birch
Shipping Weight ......................................315 lbs.
Dimensions.............................72"L x 36"W x 3"T
Table Height Above Floor ..............................38"
Tail Vise Width ............................................173⁄4
"
Tail Vise Max. Capacity....................................7"
Model H8362
Inventory
A. Bench Top.................................................. 1
B. Right Side Leg............................................ 1
C. Left Side Leg.............................................. 1
D. Cross Braces.............................................. 2
E. Tail Vise...................................................... 1
F. Vise Wood Block........................................ 1
G. Hardware and Tools (not shown)
Figure 2. Model H8361 and H8362.
—Flat Washers 5⁄16".................................. 12
—Machine Screws 5⁄16"-18 x 4" .................. 8
—Dowel Nuts 5⁄16"-18.................................. 8
—Wood Screws 5⁄16" x 21/2"......................... 4
—Wood Screws #5 x 17⁄16"......................... 2
—Cotter Pin................................................ 1
—Hex Wrench 5mm................................... 1
CoPyRigHT © MAy, 2008 By gRizzLy iNDuSTRiAL, iNC. REViSED MAy, 2009 (BL)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIzzLY INDUSTRIAL, INC.
(FoR MACHiNES MFg SiNCE 5/09 #BL10746 PRiNTED iN CHiNA
Download from Www.Somanuals.com. All Manuals Search And Download.
1
4. using an ⁄8" drill bit, drill 17⁄16" deep holes
through the vise plate mounting holes and
into the wood block.
To reduce risk of serious injury when using
this bench:
5. Secure the vise plate to the wood block with
two #5 x 17⁄16" wood screws (Figure 6).
•
Do not apply an unbalanced load that
could result in the workbench tipping
over.
6. Place a cotter pin in the end of the threaded
rod, bending it tightly around the shaft to
keep it from threading out of the vise support
block.
•
•
Do not stand or climb on the
workbench.
Avoid applying excessive force when
using workbench vise and dogs. Be sure
workpiece is securely locked in place.
Always wear eye protection.
Keep your work area clean, uncluttered
and well lit. Do not work on or place
workbench legs on floor surfaces that
are slippery from sawdust, oil, water, or
wax.
Maintenance
To avoid damaging it, do not store the workbench
outside, or in an overly damp or extremely dry
location.
•
•
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
•
•
Keep visitors and children at a safe
distance away from the work area,
especially when you are operating a
power tool.
Do not wear loose clothing, gloves,
neckties, or jewelry. Secure long hair,
button all long sleeve shirts, and wear
non-slip footwear.
-3-
H8361/H8362 (Mfg. 05/09+)
Download from Www.Somanuals.com. All Manuals Search And Download.
H8361/H8362 Parts Breakdown
10
11
5
1
12
6
9
2
8
3
6
7
4
H8361 Parts List
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
2
3
4
5
6
PH8361001
PH8361002
PH8361003
PH8361004
PH8361005
PW07
BENCH TOP
7
PH8361007
PH8361008
PH8361009
PH8361010
PH8361011
PAW05M
MACHINE SCREW 5/16"-18 X 4"
DOWEL NUT 5/16"-18
RIGHT SIDE LEG
LEFT SIDE LEG
CROSS BRACE
TAIL VISE
8
9
WOOD SCREW 5/16" X 2-1/2"
WOOD SCREW #5 X 1-7/16"
COTTER PIN
10
11
12
FLAT WASHER 5/16
HEX WRENCH 5MM
H8362 Parts List
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
2
3
4
5
6
PH8362001
PH8362002
PH8362003
PH8362004
PH8362005
PW07
BENCH TOP
7
PH8361007
PH8361008
PH8361009
PH8361010
PH8361011
PAW05M
MACHINE SCREW 5/16"-18 X 4"
DOWEL NUT 5/16"-18
RIGHT SIDE LEG
LEFT SIDE LEG
CROSS BRACE
TAIL VISE
8
9
WOOD SCREW 5/16" X 2-1/2"
WOOD SCREW #5 X 1-7/16"
COTTER PIN
10
11
12
FLAT WASHER 5/16
HEX WRENCH 5MM
-4-
H8361/H8362 (Mfg. 05/09+)
Download from Www.Somanuals.com. All Manuals Search And Download.
|