featuring
READ THIS MANUAL
Child Restraint / Booster Seat Owner’s Manual
Do not install or use this child restraint until you read and understand the instructions in this manual.
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 Graco
PD254379A
7/13 US
Table of Contents (cont.)
11.0 Securing the Child Restraint in Your
Vehicle . . . . . . . . . . . . . . . . . . . . .36
19.0 Using the Tether. . . . . . . . . . . . . . . . . .59
19.1 Storing LATCH and Tether. . . . . .60
20.0 Airplane Use . . . . . . . . . . . . . . . . . . . .61
21.0 Accessories . . . . . . . . . . . . . . . . . . . . .62
11.1 Using a Child Restraint WITH a
Built-in Harness . . . . . . . . . .36
11.2 With a Vehicle Lap or
Lap/shoulder belt . . . . . . 36-37
11.3 With LATCH . . . . . . . . . . 38-39
21.1 Body Support and
Harness Covers . . . . . . . . . . . . . .62
22.0 Recline Foot . . . . . . . . . . . . . . . . . . . .63
23.0 Care and Maintenance . . . . . . . . . . ...64
23.1 Buckle Cleaning Process . . . . . . .65
12.0 Securing Your Child in the
Child Restraint . . . . . . . . . . . . 40-41
13.0 Harness Removal . . . . . . . . . 42-46
14.0 Using Your Child Restraint WITHOUT
Built-in Harness. . . . . . . . . . . 47-49
24.0 To Remove Seat Cover . . . . . . . . . . . .66
25.0 Owners Manual Storage. . . . . . . . . . . .67
26.0 Replacement Parts and Warranty . . ...68
15.0 Securing Child & Booster Seat in . .
Vehicle . . . . . . . . . . . . . . . . . . . .50
16.0 Adjusting Head Support. . . . . . . .51
17.0 Removing Back Support . . . . 52-54
18.0 Securing Child in Vehicle Belt with
Shoulder Belt Positioning Clip.... 55-58
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1.0 Warnings to Parents and Other Users
NEVER PLACE THIS CHILD RESTRAINT IN A VEHICLE
SEATING LOCATION THAT HAS A FRONT AIR BAG. If an air
bag inÀatesꢀ it can hit the child and child restraint with great force
and cause serious injury or death to your child. Refer to your
vehicle owner’s manual for information about side air bags and
child restraint installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Failure to properly use this child restraint increases the risk of serious injury or death in a sharp
turnꢀ sudden stop or crash. Your child’s safety depends on you installing and using this child
restraint correctly.
Even if using this child restraint seems easy to ¿gure out on your ownꢀ it is very important to READ
THE OWNER’S MANUAL and the vehicle owner’s manual.
Your child’s safety depends on:
1. Choosing the correct mode of use for the child restraint depending on your child’s size.
2. Inserting the harness straps (if needed) in the proper slots for your child.
3. Selecting a suitable location for the child restraint in your vehicle.
4. Properly routing the vehicle seat belt or LATCH.
5. Properly securing the child restraint in the vehicle using a seat belt designed to restrain
both the child restraint and your child or by using LATCH. Many seat belts are NOT safe to use
with this child restraintꢀ even though they can easily be threaded through or around the child
restraint!
6. Properly securing your child in the child restraint.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2.0 Registration Information
Model Number:
Date of manufacture:
Purchase Date:
2.1 Register Your Child Restraint
Please ¿ll in the above information. The model number and date of manufacture can be found on a
label on the child restraint. Fill out the prepaid registration postcard attached to the harness and
mail it today.
Child restraints could be recalled for safety reasons. You must register this restraint to be reached
in a recall. Send your nameꢀ addressꢀ and the restraint’s model number and date of manufacture to:
Graco Children’s Products Inc.
Attn: Customer Service
3 Glenlake Parkway
Atlanta, GA 30328
or call 1-800-345-4109 or register online at:
http://www.gracobaby.com/carseatregistration
2.2 For Recall Information
Call the U.S. Government’s Vehicle Safety Hotline at: 1-888-327-4236
(TTY:1-800-424-9153), or go to http://www.NHTSA.gov or contact Graco:
1-800-345-4109 or www.gracobaby.com
Download from Www.Somanuals.com. All Manuals Search And Download.
6
2.3 If You Need Help
Please contact our Customer Service Department with any questions you may have concerning
partsꢀ useꢀ or maintenance. When you contact usꢀ please have your product’s model and
date of manufacture ready so that we may help you ef¿ciently. These numbers can be found
on a label on the child restraint.
USA: 1-800-345-4109 or www.gracobaby.com
www.cpsc.gov
www.NHTSA.gov www.seatcheck.org
3.0 Useful Information
3.2 Child Restraint Useful Life
3.1 CertiÀcation
STOP using this child restraint and throw it away 10 years after the
THIS CHILD RESTRAINT
CONFORMS to all applicable
Federal Motor Vehicle Safety
Standards and is certi¿ed for
use in motor vehicles.
date of manufacture.
Look for this sticker on rear
of child restraint:
MODEL
NAME
Date of Manufacture
year
month
day
It is certi¿ed for use in Aircraft
only when used with the
GRACO CHILDREN'S PRODUCTS, INC.
ATLANTA, GA 30328
Made in China
1-800-345-4109
built-in harness. When used
as a booster without the
harnessꢀ this restraint is NOT
certi¿ed for use in aircraft.
3.3 Second Hand Child Restraint
Graco Children’s Products Inc. advises against loaning or
passing along a child restraint.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
4.0 Features
Download from Www.Somanuals.com. All Manuals Search And Download.
8
The locking clip is stored
on the back of the child
restraint. You will need to
use it with certain types
of vehicle seat belts.
United States Federal
Motor Vehicle Safety
Standards have de¿ned a
system for installing child
restraints in vehicles.
The system is called
LATCH (Lower
Anchorage and Tether for
CHildren). LATCH may
ONLY be used IN PLACE
of vehicle belt if vehicle is
equipped with LATCH
anchor points. Please
refer to vehicle owners
manual for LATCH
locations in vehicles.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
5.0 Assembling the Child Restraint
Adult assembly required.
1. Lay child restraint flat on back. Grab seat pad
KEEP GUTTERS CLEAR
fabric in sitting area to expose the gutters .
MAKE SURE all handsꢀ fingers and other objects
are clear of the gutters.
2. MAKE sure the harness straps are securely
attached within the “T”-shaped slots around the
arms as shown .
KEEP GUTTERS CLEAR
With your other handꢀ raise seat back so that
both arms LOCK into the gutters .
Harness Strap
T-slot
A r m
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
3. Arms should CLICK into the gutters.
Seat assembly should appear as shown .
CLICK!
4. Attach 4 elastic loops from the seat pad under
the seat exactly as shown in .
Download from Www.Somanuals.com11. All Manuals Search And Download.
5. Pull elastic loop on the seat pad through the
vehicle belt guide on side of seat and attach to
hook as shown . Repeat on other side.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
6. The assembly is now complete.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
6.0 WARNINGS
ꢀ12ꢀ&+,/'ꢀ5(675$,17ꢀ&$1ꢀ*8$5$17((ꢀ
PROTECTION FROM INJURY. Howeverꢀ
proper use of this child restraint reduces the
risk of serious injury or death to your child.
DO NOT use locking clip in booster mode.
According to accident statisticsꢀ
CHILDREN ARE SAFER WHEN PROPERLY
RESTRAINED IN REAR VEHICLE
DO NOT INSTALL OR USE THIS CHILD
RESTRAINT UNTIL YOU READ AND
UNDERSTAND THE INSTRUCTIONS IN THIS
MANUAL AND IN YOUR VEHICLE OWNER’S
MANUAL. DO NOT let others install or use the
child restraint unless they understand how to
use it.
SEATING POSITIONS, RATHER THAN
FRONT SEATING POSITIONS. For a
vehicle with a front passenger air bagꢀ refer to
your vehicle owner’s manual as well as these
instructions for child restraint installation.
NEVER LEAVE YOUR CHILD
FAILURE TO PROPERLY USE THIS CHILD
RESTRAINT INCREASES THE RISK OF
SERIOUS INJURY OR DEATH IN A SHARP
TURN, SUDDEN STOP OR CRASH. Your child
can be injured in a vehicle even if you are not
in a crash. Sudden braking and sharp turns
can injure your child if the child restraint is not
properly installed or if your child is not properly
secured in the child restraint.
UNATTENDED.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
NEVER LEAVE A CHILD RESTRAINT
UNSECURED IN YOUR VEHICLE. An
NEVER USE CHILD RESTRAINT IF IT HAS
DAMAGED OR MISSING PARTS. Do not use
unsecured child restraint can be thrown around a cutꢀ frayed or damaged child restraint
and may injure occupants in a sharp turnꢀ
sudden stop or crash. Remove it or make sure
that it is securely belted in the vehicle. If not
using LATCH and tether, make sure LATCH
and tether connectors are properly stored on
back of seat.
harnessꢀ LATCH belt or vehicle seat belt.
THE CHILD RESTRAINT CAN BECOME
VERY HOT IF LEFT IN THE SUN. Contact with
these parts can burn your child’s skin. Always
touch the surface of any metal or plastic parts
before putting your child in the child restraint.
REPLACE THE CHILD RESTRAINT AFTER
AN ACCIDENT OF ANY KIND. An accident
can cause damage to the child restraint that
you cannot see.
NEVER GIVE THIS CHILD RESTRAINT to
someone else without also giving them this
manual.
DO NOT MODIFY YOUR CHILD
RESTRAINT or use any accessories or parts
supplied by other manufacturers.
NEVER USE A SECOND-HAND CHILD
RESTRAINT or a child restraint whose history
you do not know.
DO NOT USE THIS child restraint without
properly assembling it.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
7.0 Height and Weight Limitations
FAILURE TO USE CHILD RESTRAINT IN A MANNER APPROPRIATE FOR YOUR CHILD’S
SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of
this child restraint differ greatly depending on the size of your child. Be sure you are using the child
restraint in the correct mode and with the correct features for your child.
7.1 WITH Built-In Harness
Your child must meet all requirements:
Weight: 20 to 65 lbs (mass between 9 and 29.5 kg)
Height: 27 to 52 inches (69 and 132 cm) in height
At least one year old and can sit upright unassisted
Shoulders are BELOW top harness slots.
If shoulders are above top harness slotsꢀ child
is too large for built-in harness.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
7.2 WITHOUT Built-in Harness
Your child must meet all requirements:
Weight: 30 to 100 lbs
(mass between 13.6 and 45 kg)
Height: 38 to 57 inches
(96 and 145 cm) in height
approximately 3-10 years of age
the shoulder belt MUST lie across child’s
shoulder as shown and the lap portion of the
belt is positionned low on the child’s hips.
Child’s ears are BELOW top of booster seat.
If tops of ears are above top of seatꢀ child is too
large for booster seat.
If child is between 30 and 65 lbs and
shoulders are below the upper harness
slots, we highly recommend use of the
built-in harness for as long as possible
(up to 65 lbs).
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
7.3 WITHOUT Back Support
Your child must meet all requirements:
weigh between 40 and 100 lbs.
(mass between 18 and 45 kg)ꢀ
and are between 40 and 57 inches
(101 and 145 cm) in heightꢀ
approximately 4-10 years of age
the shoulder belt MUST lie across child’s
shoulder as shown and the lap portion of the
belt is positionned low on the child’s hips.
When sitting on the booster seatꢀ your child’s
ears should be below the top of the vehicle seat
cushion / head rest.
Your Graco booster seat can be used with or
without the back support as long as all
requirements are met.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
8.0 Choosing an Appropriate Vehicle Seat Location
8.1 Vehicle Seat Location Requirements
IMPROPER PLACEMENT OF THE CHILD RESTRAINT
INCREASES THE RISK OF SERIOUS INJURY OR DEATH.
Some seating positions in your vehicle may not be safe for this child restraint. Some vehicles do
not have any seating positions that can be used safely with the child restraint. If you are not sure
where to place the child restraint in your vehicleꢀ consult your vehicle owner’s manual or call
Graco Children’s Products Inc.ꢀ1-800-345-4109.
Children are safer when properly
ꢀ7KHꢀYHKLFOHꢀVHDWꢀPXVWꢀIDFHꢀIRUZDUGꢁ
Do not use child restraints on rear-facing or
side-facing vehicle seats.
restrained in rear vehicle seating positions.
Whenever possible secure the child restraint in
the center position of the seat directly behind
the front seats. Howeverꢀ this position is
sometimes equipped with a lap belt only and
cannot be used when this child restraint is
used without the built-in harness.
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
8.2 Vehicle Seat Belt Requirements
MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE
WITH THE CHILD RESTRAINT. THE VEHICLE SEAT BELT
MUST BE DESIGNED TO HOLD THE CHILD RESTRAINT
TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that
are not safe to use look very much like seat belts that are safe to use. If you are unsureꢀ
consult your vehicle owner’s manual or call Graco Children’s Products Inc.ꢀ 1-800-345-4109.
8.3 SAFE Vehicle Seat Belt Systems
THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CHILD RESTRAINT, IF the
seat location meets all other requirements of these instructions and those in your vehicle owner's
manual. LATCH can be used in place of the following vehicle belt systems if your vehicle is
equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
8.4 For Built-in Harness Only
ꢀ /DSꢀ%HOWVꢀꢂꢀ0DQXDOO\ꢀ$GMXVWHG
When buckledꢀ the belt is tightened
manually by pulling on the excess belt.
ꢀ Lap Belts with Automatic Locking
Retractor (ALR)
The automatic locking retractor will not
permit the lap belt to lengthen once it is
buckled. Tighten the belt by feeding the belt
back into the retractor while pushing down
hard on the child restraint.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
8.5 With OR Without Built-in Harness
ꢀ &RPELQDWLRQꢀ/DSꢃ6KRXOGHUꢀ%HOWꢀZLWKꢀ
Locking Latch Plate
Once it is buckledꢀ this type of belt has a
latchplate that will not allow the lap portion
of the belt to loosen. Belt is tightened by
pulling hard on the shoulder portion of the
vehicle belt while pushing down hard on
the child restraint.
ꢀ &RPELQDWLRQꢀ/DSꢃ6KRXOGHUꢀ%HOWꢀZLWKꢀ
Sliding Latch PlateThis belt has a
latchplate that slides freely along the belt.
ꢀꢀThis belt MUST be converted to prevent
movement of the lap portion of the belt. You
must use the locking clip provided with the
child restraintꢀ unless your vehicle's seat
belt can be converted in another way as
described in your vehicle owner's manual.
Locking clip
When using booster seat WITHOUT the
built-in harnessꢀ locking clip is NOT
to be used.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
8.6 To Install Locking Clip
1. Tighten the buckled belt by pushing down hard on the child restraint and pulling hard on the
shoulder belt.
2. While pushing down on seatꢀ pinch the two straps together behind the buckle tongue. Unbuckle
the belt without allowing it to slip.
3. Attach locking clip to lap and shoulder belts as shown .
4. Rebuckle belt. Check that lap belt does not move
by pulling hard. If belt loosens or lengthensꢀ repeat
procedure.
Remove locking clip when not using child restraint. Store
under it’s tab on the rear of seat.
Test installation to see if child restraint is secure.
If not secureꢀ additional belt tightening may be required:
Unbuckle vehicle seat belt.
1ꢃ2” (1.25cm)
Hold belts together and remove locking clip.
Shorten length of lap belt portion slightly by pulling belt
through latch plate. Re-attach locking clip.
Buckle vehicle seat belt. Press child restraint further down
into vehicle seat cushion to help buckle vehicle seat belt. Test
installation to see if child restraint is secure. If not secureꢀ
repeat above steps until secure.
Download from Www.Somanuals.co2m3. All Manuals Search And Download.
8.7 UNSAFE Vehicle Belt Systems
DO NOT USE ANY OF THE FOLLOWING SYSTEMS TO SECURE THE CHILD RESTRAINT.
LATCH can be used IN PLACE OF the following unsafe belt systems if your vehicle is equipped
with LATCH anchor points. Please refer to the vehicle owners manual for LATCH locations.
NEVER USE unsafe belt systems.
Lap Belts with Emergency
Locking Retractor (ELR)
This lap belt stays loose and can move
until it locks in a crash or sudden stop.
ꢀ &RPELQDWLRQꢀ/DSꢃ6KRXOGHUꢀ%HOWꢀZLWKꢀ
Retractor
Each strap has a retractor at one end and
is attached to the latch plate at the other
end.
Passive Restraint - Lap or Shoulder Belt
Mounted on Door
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
Passive Restraint -
Lap Belt with Motorized Shoulder Belt
DO NOT use vehicle belts that are
attached to the door in any way or that
move along a track to automatically
surround the passenger when the door is
closed.
Lap Belts Forward of Seat Crease
Vehicle seat belts located forward of
seat crease may not securely hold child
restraint. Check vehicle owner’s manual or
see vehicle dealer for car seat installation
requirements.
If approved for use with child restraint,
install child restraint and check for secure
installation by pulling child restraint front
to back. If child restraint slides forward,
DO NOT use these seat belts.
Download from Www.Somanuals.co2m5. All Manuals Search And Download.
9.0 LATCH
9.1 What is LATCH?
United States Federal Motor Vehicle Safety Standards have defined a
system for installing child restraints in vehicles. The system is called LATCH.
LATCH stands for:
Lower Anchors and Tethers for CHildren.
LATCH in the vehicle consists of a top tether anchor point and two lower anchor
points.
Some vehicle owner manuals use the term ISOFIX to identify the new child
restraint anchor system. This child restraint with LATCH can also be used in
vehicle seating positions equipped with ISOFIX.
Newer vehicles have one or more seating positions with LATCH anchor points.
If vehicle is equipped with LATCH, the vehicle lower anchor points may be
visible at the vehicle seat crease. If not visible, they may be marked with this
symbol
CHECK vehicle owner’s manual for vehicle top tether anchor locations. They
may be identified using one of the anchor symbols as shown
.
.
ONLY use LATCH on a child restraint in a seating position recommended by
vehicle manufacturer.
Download from Www.Somanuals.co2m6. All Manuals Search And Download.
NOTE: Some vehicle manufacturers have lower maximum weight ratings for
LATCH anchors, so you must consult your vehicle owner’s manual or call the
vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.
Use vehicle belt (not LATCH connectors) for installations with children
weighing more than 48 pounds (21.7 kg).
Vehicle Top Tether
See your vehicle
Anchor Points
owner’s manual for
exact locations, anchor
identification, and
requirements for use
with a child restraint.
Vehicle Lower
Anchor Points
Typical seat in a
passenger vehicle.
Other vehicle types
may have different
LATCH locations.
Vehicle
Seat Crease
Download from Www.Somanuals.co2m7. All Manuals Search And Download.
9.2 LATCH System
LATCH consists of a permanently
attached lower anchor belt and a top
tether strap.
ONLY use LATCH in a seating
position recommended by vehicle
manufacturer.
LATCH lower vehicle anchor points
are defined as 11 inches from the
center of one LATCH anchor to the
center of another LATCH anchor.
If allowed by your Vehicle Owners
Manual, the center seating position
maybe used if the anchor spacing is
11” or greater.
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
Child Restraint
Top Tether
Vehicle Top Tether
Anchor Point
Vehicle Lower
Anchor Points
Lower
Anchor Belt
Download from Www.Somanuals.co2m9. All Manuals Search And Download.
10.0 Using Child Restraint WITH Built-in Harness
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your
child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
1. Loosen the harness straps by lifting the
harness adjuster lever at front of seat near
the adjustment strap and pulling the straps
toward you .
2. Open harness clip .
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
3. Unbuckle harness straps .
4. Check the crotch strap: Choose the
position that is closest to but not under
your child.
To change crotch strap positionꢀ push crotch
belt up through the bottom of the child
restraint and grab it from the top to pull out .
Reinsert crotch strap in the desired position.
Make sure crotch strap is not twisted when
reinserting into slot. Pull up on it to make sure
it is secure.
Download from Www.Somanuals.co3m1. All Manuals Search And Download.
5. The harness straps must go into the slots
HYHQꢀZLWKꢀRUꢀMXVWꢀDERYHꢀWKHꢀVKRXOGHUV .
If straps are in proper slots go to page 36.
6.ꢀ7RꢀDGMXVWꢀKDUQHVVꢀVWUDSVꢄ
a) Turn seat aroundꢀ so you will have access to
the rear of the seat.
b) From the rear of the seat remove straps
from metal junction plate
.
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
7. Pull strap ends through slots at
front of seat ¡ꢀand reinsert them
in the desired slots ¢. Check that
the straps are not twisted.
¡
¢
MAKE SURE harness straps
are inserted into the same slots
on each side of the seat.
Remove body support when not
using harness in the lowest slot
position.
Download from Www.Somanuals.co3m3. All Manuals Search And Download.
8. Use plastic strap guides as
a guide to feed the harness up
over the red rollers. Make sure
to feed straps OVER red rollers
Harness
straps
MUST
go over
red
11
and plastic strap guides
.
11
Make sure that the tether strap
does not interfere when
changing the harness strap
height positions.
rollers.
9. If the straps are not fed OVER
the red rollersꢀ the assembly is
incorrect and MUST be corrected
before using child restraint.
12
10. Reassemble straps onto
metal junction plate exactly as
12
shown
.
Check that straps are
completely within the slots
and that they are not twisted.
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
11. Check that the straps are inserted at the
same level. Pull on harness to make sure it is
secure 13 .
13
REMEMBER to check the shoulder straps and
crotch strap position as your child grows and
move them to the next position when
necessary. The harness straps must go in the
slots even with or just above the shoulders.
Download from Www.Somanuals.co3m5. All Manuals Search And Download.
11.0 Securing the Child Restraint in Your Vehicle
FAILURE TO PROPERLY SECURE THE CHILD RESTRAINT IN
THE VEHICLE INCREASES THE CHILD’S RISK OF
SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP
TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle
owner’s manual to be sure your child restraint is properly positioned and held tightly at all times.
11.1 Using a Child Restraint WITH a Built-in Harness
11.2 With a Vehicle Lap or Lap/shoulder Belt:
Lower anchors must be stored when using vehicle belt.
See Section 19.1, Storing LATCH, page 60.
1. Place the child restraint firmly against the back of a
forward-facing vehicle seat.
2. Thread the seat belt through the belt slot openings:
For Lap/Shoulder belt
For Lap-only belt
3. Buckle the vehicle belt. The vehicle belt should not be
twisted.
Download from Www.Somanuals.co3m6. All Manuals Search And Download.
4. Tighten vehicle seat belt
Push down hard with your knee or free hand
in the middle of the child restraint .
Then pull and tighten the vehicle belt.
For more information on how to tighten the
belt for your seat belt systemꢀ see Section 8.0
Choosing an Appropriate Vehicle Seat Locationꢀ
p.19ꢀ or your vehicle owner’s manual.
5. If a vehicle top tether anchor is available,
secure the tether to hold seat in place.
See Section 19.0 Using the Tetherꢀ page 59.
When not using the tetherꢀ hook it on the tether
storage bar on the rear of the seatꢀ see page 60.
6. Safety Check for Secure Installation
Perform this test every time you drive with your child.
Twist and pull child restraint forward and to
both sides to make sure the vehicle belt does not
lengthen or loosen and the child restraint does not
easily move. The child restraint should not move
side to side or forward more than 1 inch (2.5 cm). .If
child restraint is loose or not secureꢀ repeat procedure
OR find another location for the child restraintꢀ see
Section 8.0 Choosing an Appropriate Vehicle Seat
Download from Www.Somanuals.co3m7. All Manuals Search And Download.
Locationꢀ p. 19.
11.3 With LATCH
Use vehicle belt (not LATCH connectors) for
installations with children weighing more than
48 pounds (21.7 kg). NOTE: Some vehicle
manufacturers have lower maximum weight
ratings for LATCH anchorsꢀ so you must
consult your vehicle owner’s manual or call the
vehicle manufacturer to confirm the limits on your
vehicle’s LATCH anchors.
1. Unhook LATCH from storage bars on the
sides of the seat. For ease of installationꢀ
extend LATCH to its maximum length.
2. Place the child restraint firmly against
the back of a forward-facing vehicle seat.
3. Hook LATCH Connectors to vehicle lower
anchors . Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt .
5. If you need to remove LATCH to readjustꢀ
push button on LATCH buckle to loosen strap.
Download from Www.Somanuals.co3m8. All Manuals Search And Download.
6. NEVER put two LATCH connectors on
one vehicle LATCH anchor unless specifically
allowed by the vehicle manufacturer .
7. All LATCH seating positions have
tether anchors. Secure the top of the seat
using the tether strap. See Section 19.0 Using
the Tetherꢀ page 59.
8. Safety Check for Secure Installation
Perform this test every time you drive with
your child.
Twist and pull child restraint forward and to
both sides to make sure the LATCH belt does
not lengthen or loosen and the child restraint
does not easily move. The child restraint
should not move side to side or forward more
than 1 inch (2.5 cm). .If child restraint is
loose or not secureꢀ repeat procedure OR find
another location for the child restraintꢀ see
Section 8.0 Choosing an Appropriate Vehicle
Seat Locationꢀ p. 19.
Download from Www.Somanuals.co3m9. All Manuals Search And Download.
12.0 Securing Your Child in the Child Restraint
FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CHILD
RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP
OR CRASH. In a crashꢀ the child restraint provides NO protection for your child unless the harness
straps are properly secured. Follow these instructions carefully to properly secure your child.
ꢀ ADJUST THE HARNESS SYSTEM SNUGLY
EVERY TIME you place your child in the child
restraint.
ꢀꢀAvoid bulky clothing.
1. Place child in child restraint with child’s back flat
against back of car seat.
2. Place harness straps over child’s shoulders
and insert tongues into buckle until they click
CLICK!
into place .
CHECK that straps are not twisted.
CHECK that harness is securely latched by pulling up
on straps.
DO NOT use child restraint if harness does not latch.
Download from Www.Somanuals.co4m0. All Manuals Search And Download.
3. Fasten harness clip . Position harness
clip at middle of child’s chestꢀ level with
armpits.
4. Tighten the harness straps by pulling the
adjustment strap on the front of the seat .
5. Make sure straps are flat and snug
against child’s shoulders and thighs.
You should not be able to pinch the
harness straps. A snug strap should not
allow any slack. It lies in a relatively straight
line without sagging. It does not press on
the child’s flesh or push the child’s body into
an unnatural position.
Download from Www.Somanuals.co4m1. All Manuals Search And Download.
13.0 Harness Removal
1. Remove harness straps.
Open chest clip and harness buckle .
2. Face the rear of the seat and remove the
belt straps from metal junction plate ꢀas
shown .
3. Remove crotch strap by pushing the strap
retainer ꢀon bottom of seatꢀ up through slot.
Download from Www.Somanuals.co4m2. All Manuals Search And Download.
4. Grab the crotch strap buckle and pull it
completely out .
ꢀ
5. Pull on the adjustment strap ꢀon the front
of the seat to lock the metal junction plate into
place.
ꢀ
6. Grab hold of the shoulder straps and pull
them out of their respective slots on the seat
pad.
Remove body support and crotch pad.
Download from Www.Somanuals.co4m3. All Manuals Search And Download.
7. On the rear of the seatꢀ detach 2 lower seat
pad elastic straps from hooks as shown in .
8. Also detach the elastic straps that are
threaded through the vehicle belt guides on the
sides of the seat as shown in . Repeat on
other side.
9. Pull the seat pad out of the way to reveal the
red buttons as shown in the seating area ¡ .
Slide the buttons to release the back support
from the base and lower it into a flat position.
Hold the back support to avoid it from falling
back and hitting something.
¡
Download from Www.Somanuals.co4m4. All Manuals Search And Download.
10. Remove harness straps from arms as
shown in ¢.
Store the body supportꢀ harness coversꢀ crotch
pad cover and harness straps
in safe place for future use.
¢
Harness Strap
Arm
T-slot
11
11. Move seat pad fabric out of the way then
raise seat back so that both arms LOCK into
the gutters
.
11
You should hear a CLICK when the arms lock
into the gutters.
MAKE sure to keep the gutters clear of any
obstructions.
KEEP
GUTTERS CLEAR
Download from Www.Somanuals.co4m5. All Manuals Search And Download.
12. Tuck seat pad in between the gap of the
back support and seat area of the booster seat
to allow 2 elastic straps to show at the rear of
the seat.
13. Attach 2 seat pad elastic straps onto the
hooks on the rear of the child restraint as
12
shown in
.
12
14. Pull elastic strap on the seat pad through
the vehicle belt guide on side of seat and
attach to hook as shown.
Repeat on other side
.
13
13
Reverse instructions to reinstall harness.
See Section 10.0ꢀ page 30-35 for the correct
path for the harness.
Download from Www.Somanuals.co4m6. All Manuals Search And Download.
14.0 Using Your Child Restraint WITHOUT Built-in Harness
FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CHILD
RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR
CRASH. In a crashꢀ the child restraint provides NO protection for your child unless the vehicle lap/
shoulder belt is properly secured. Follow these instructions carefully to properly secure your child.
WARNING! Use only the vehicle lap and
shoulder belt system when restraining the child
in the booster seat. LATCH will not secure your
child in the booster seat .
Vehicle belts MUST lie flat against child and
MUST not be twisted.
NEVER use a vehicle lap-only belt across front
of child .
INCORRECT
Download from Www.Somanuals.co4m7. All Manuals Search And Download.
DO NOT use shoulder belt loose
or positioned under arm .
DO NOT place shoulder belt behind child’s
back .
INCORRECT
INCORRECT
Lap portion of lap/shoulder belt MUST be low
and snug on hipsꢀ just touching thighs.
DO NOT allow child to slide
down in booster seat .
If child will not keep vehicle belt properly
positionedꢀ DO NOT use this booster seat.
Use a different child restraint system.
DO NOT position vehicle belt over top of the
armrests .
INCORRECT
INCORRECT
Download from Www.Somanuals.co4m8. All Manuals Search And Download.
Vehicle seat headrest should not create a
gap between vehicle seat and booster seat
. The front of booster seat MUST NOT
hang over front of vehicle seat
.
INCORRECT
INCORRECT
Download from Www.Somanuals.co4m9. All Manuals Search And Download.
15.0 Securing Child & Booster Seat in Vehicle
1. Place booster seat firmly against the back of
a forward-facing vehicle seat equipped with a
lap/shoulder belt only.
2. Place child in car seat with child’s back flat
against back of car seat.
3. Position lap/shoulder belt through shoulder
belt guide not underneath shoulder belt
guide . Belt should pass over vehicle belt
guide . Fasten buckle and pull up on the
shoulder belt to tighten.
4. If belt lies across child’s neckꢀ head or faceꢀ
redirect belt over shoulder by adjusting the
head support settingꢀ See page 51, Adjusting
Head Support.
5. Check that shoulder belt is properly
positioned over shoulder and snug against
child. A snug strap should not allow any slack.
It lies in a relatively straight line without
sagging. It does not press on the child’s flesh
or push the child’s body into an unnatural
Download from Www.Somanuals.co5m0. All Manuals Search And Download.
position.
16.0 Adjusting Head Support
When using with or without the built-in
harness.
BEFORE adjusting the head support heightꢀ
have your child lean forward slightly.
Squeeze the red adjustment handle on
top of seat and pull back support up until it
snaps into one of the 5 height positions.
To lowerꢀ squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the 5 height positions by pulling
up on head support.
The shoulder belt guides must be even with
or just above the shoulders as shown by
dotted line .
Download from Www.Somanuals.co5m1. All Manuals Search And Download.
17.0 Removing Back Support
To use booster seat WITHOUT back
supportꢀ remove harness straps if attached
(see section 13.0 Harness Removal, p.42-46)
then continue with the following steps:
1. Detach 2 lower elastic straps from rear of
seat as shown .
2. Detach elastic strap from the hooks on the
seat pad as shown. Repeat on other side .
Download from Www.Somanuals.co5m2. All Manuals Search And Download.
3. Pull the seat pad out of the way to reveal
red buttons as shown in . Slide the buttons
to release the back support from the base and
lower it into a flat position.
When removing back supportꢀ you must
support the back support when sliding the red
buttons that disengage the back support from
the base. Make sure all handsꢀ fingers and
other objects are not behind the back support
when removing it.
4. Move seat pad fabric out of the way and
squeeze red buttons together to release back
support from seat. Pull seat and back support
apart .
Download from Www.Somanuals.co5m3. All Manuals Search And Download.
5. Once back support is separated ꢀ store
back support with all the harness strapsꢀ head
supportꢀ body support and crotch pad cover in
safe place.
6. Reattach the elastic straps at the back of the
seat and through the vehicle belt guide on
the sides of seat as shown.
7. Seat is ready to install.
To reattach back support if neededꢀ reverse steps
from p. 54 to p. 52.
Download from Www.Somanuals.co5m4. All Manuals Search And Download.
18.0 Securing Child in Vehicle with Shoulder Belt
Positioning Clip
The shoulder belt MUST lie across child’s
shoulders in red zone as shown .
If shoulder belt lies outside this zoneꢀ the
shoulder belt positioning clip MUST be used.
To attach clip to booster seat:
1. Insert the loop end of strap through the slot
on rear of seat exactly where shown .
There is a slot on each side of booster seatꢀ
the shoulder belt positioning clip MUST be
attached through the slot closest to where the
vehicle shoulder belt lies across the child.
Download from Www.Somanuals.co5m5. All Manuals Search And Download.
2. Pass the clip and the strap through the loop
end ꢀas shown and pull strap up.
3. NOTE: Free end of strap should face
front of seat.
Download from Www.Somanuals.co5m6. All Manuals Search And Download.
4. Slide the vehicle shoulder belt onto the clip as shown and pull free end of strap down to
tighten clip against the child’s shoulder.
The lap portion MUST pass through the vehicle belt guide and be positionned low on the hips.
The belt MUST NOT be twisted.
Shoulder belt
positioning clip
Shoulder belt
positioning clip
REAR VIEW OF CHILD
SITTING IN SEAT
Download from Www.Somanuals.co5m7. All Manuals Search And Download.
5. Lap portion of lap/shoulder belt MUST be low and
snug on hipsꢀ just touching thighs.
DO NOT allow child to slide down in booster seat .
CORRECT
Download from Www.Somanuals.co5m8. All Manuals Search And Download.
19.0 Using the Tether
All LATCH seating positions have tether anchors. Always use tether if a vehicle tether anchor is
availableꢀ check your vehicle owner’s manual for the tether anchor location(s). If your vehicle is
not equipped with a tether anchorꢀ it may be possible to install one. Contact your vehicle
dealership for the proper anchor location and installation.
1. Check that tether is securely attached to
child restraint.
2. Fasten tether clip to anchor point .
3. Tighten the tether strap securely .
4. To loosenꢀ push button while
pulling on the belt as shown .
Download from Www.Somanuals.co5m9. All Manuals Search And Download.
19.1 Storing Lower Anchors and Tether (LATCH)
1. For ease of storingꢀ extend LATCH to its
maximum length.
Storage bars located
on each side at the
back of the seat
2. Locate the storage bars on back of
child restraint .
3. Fasten ends of tether and lower anchors
onto their respective storage bars as shown
.
Tether
Lower
anchors
4. Tether and lower anchors storage should
look like this when complete .
Lower
anchors
Download from Www.Somanuals.co6m0. All Manuals Search And Download.
20.0 Airplane Use
This restraint is certified for use in Motor Vehicles.
It is certified for use in Aircraft ONLY when used with the built-in harness.
When used as a booster WITHOUT the harnessꢀ this restraint is NOT CERTIFIED for aircraft use
because aircraft seats do not have a shoulder belt.
Important points to remember:
1. Airlines have some restrictions about the use of child restraints.
2. Install your car seat on an airplane in the same way it is installed in an automobile with a lap
belt (see Section 11.1ꢀ Using Child Restraint WITH Built-in harnessꢀ pp. 36).
3. Check that the airplane seat belt holds the child restraint securely in place at all times.
Download from Www.Somanuals.co6m1. All Manuals Search And Download.
21.0 Accessories (on certain models ONLY)
21.1 Body Support & Harness Covers
To prevent ejection in sudden stop or crash:
Always make sure shoulder straps are threaded through
slots and properly positioned on shoulders.
Never allow body support to bunch or fold behind child.
Use body support with bottom harness slots only.
Make sure that harness covers do not interfere with
placement of the chest clip at armpit level.
Download from Www.Somanuals.co6m2. All Manuals Search And Download.
22.0 Recline Foot
Your child restraint has 3 recline positions: adjust
recline foot before installing child restraint.
1. To recline seatꢀ pull recline handle out and
tilt seat back to extend foot as shown .
2. To set seat to upright positionꢀ pull recline
handle out ꢀand tilt seat foward to retract
foot .
Download from Www.Somanuals.co6m3. All Manuals Search And Download.
23.0 Care and Maintenance
Continuous use of child restraint may cause damage to vehicle seat. Use a child restraint matꢀ
towel or thin blanket to protect upholstery.
Metal and plastic parts: clean with mild soap and cool water. No bleach or detergents.
Harness straps and LATCH straps: spot clean or replace. Do not immerse the straps in water.
Doing so may weaken the straps.
If buckle or harness adjuster sticks or will not remain tightꢀ check for foreign objects such as
foodꢀ dirtꢀ etc. Remove objects with tweezers and/or clean with a cotton swab. If you cannot get
the harness to remain tight with the buckle securely lockedꢀ do not use this child restraint. Call
Graco at 1-800-345-4109 to purchase a replacement harness or buckle.
Download from Www.Somanuals.co6m4. All Manuals Search And Download.
23.1 Buckle Cleaning Process
3UHYHQWꢀVHULRXVꢀLQMXU\ꢀRUꢀGHDWKꢄ
Buckle must be properly latched.
Periodically inspect and clean buckle to remove
objects or debris that could prevent latching.
1. Turn restraint overꢀ push retainer through crotch strap slot .
2. To clean buckle - place in a cup of warm water and gently agitate
the buckleꢀ press the red button several times while in the water
. DO NOT SUBMERGE THE HARNESS WEBBING. DO NOT
USE SOAPS or LUBRICANTS. DO NOT use household detergents.
Never lubricate buckle.
3. Shake out excess water and allow to air dryꢀ harness webbing
should be dry before use .
4. Repeat Step 2 and 3 as needed. Buckle should fasten with a
“click”.
5. Re-attach buckle into the same slot from Step 1. Re-check
harness for correct installation before use.
Download from Www.Somanuals.co6m5. All Manuals Search And Download.
24.0 To Remove Seat Cover
Seat Cover: clean with a damp sponge using
mild soap and cool water. If necessaryꢀ cover
may be removed for cleaning.
1. Remove harness and crotch straps (see
Section 13.0ꢀ Harness Removalꢀ p.42-46).
2. Remove elastic loops from seat as indicated
in ꢀand .
Hook and loop
attachment tape
3. Machine wash cover in cold water on
delicate cycle and drip-dry. DO NOT USE
BLEACH.
4. To put the seat cover back onꢀ reverse
preceding instructions.
Hook and loop
attachment tape
Download from Www.Somanuals.co6m6. All Manuals Search And Download.
25.0 Owners Manual Storage
Your Owner’s Manual can be stored on
the bottom of the seat inside the slot in the
footrest as shown.
Download from Www.Somanuals.co6m7. All Manuals Search And Download.
26.0 Replacement Parts and Warranty
To purchase parts or accessories or for warranty information in the United States,
please contact us at the following:
www.gracobaby.com
or
1-800-345-4109
Download from Www.Somanuals.co6m8. All Manuals Search And Download.
con
LEA ESTE MANUAL Sistema de seguridad / Asiento para niños Manual del dueño
No instale ni use este sistema de seguridad para niños hasta que haya leído y entendido las
instrucciones en este manual. NO USAR DEBIDAMENTE ESTE SISTEMA DE SEGURIDAD
PARA NIÑOS AUMENTA EL RIESGO DE LESIONES SERIAS O FATALES EN UN ACCIDENTE
O AL DETENERSE DE REPENTE.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 Graco
PD254380A
7/13 SP
Índice de materias
1.0 Advertencias a padres y otros
usuarios . . . . . . . . . . . . . . . . . . . 4-5
7.0 Limitaciones de peso y altura. . . .17
7.1 CON el arnés incorporado . .17
7.2 SIN el arnés incorporado . . .18
7.3 SIN el soporte de la espalda 19
8.0 Cómo elegir un lugar apropiado para
el asiento del vehículo . . . . . . . . .20
2.0 Información sobre el registro . . . . .6
2.1 Registro de su sistema de
seguridad para niños . . . . . . .6
2.2 Para obtener información
sobre el retiro de productos
del mercado . . . . . . . . . . . . . .6
8.1 Requisitos del lugar del asiento
del vehículo . . . . . . . . . . . . .20
8.2 Requisitos del cinturón de
seguridad del vehículo . . . . .21
8.3 Sistemas SEGUROS del cinturón
de seguridad del vehículo . . .21
2.3 Si necesita ayuda . . . . . . . . . .7
3.0 Información útil . . . . . . . . . . . . . . . .7
3.1 Certificación. . . . . . . . . . . . . . .7
3.2 Vida útil del sistema de
8.4 Para el arnés incorporado
solamente . . . . . . . . . . . . . . .22
seguridad para niños . . . . . . .7
3.3 Sistema de seguridad
para niños usado . . . . . . . . . .7
4.0 Características . . . . . . . . . . . . . . 8-9
8.5 CON o SIN el arnés
incorporado . . . . . . . . . . . . . .23
8.6 Para instalar la traba
5.0 Armado del sistema de
de seguridad . . . . . . . . . . . . .24
seguridad . . . . . . . . . . . . . . . . 10-14
8.7 Sistemas PELIGROSOS de
cinturones de vehículos . 25-26
6.0 ADVERTENCIA . . . . . . . . . . . 15-16
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Índice de materias (cont.)
16.0 Ajuste del soporte de la cabeza. .51
9.0 LATCH. . . . . . . . . . . . . . . . . . . . . .27
9.1 ¿Qué es LATCH? . . . . . . 27-28
9.2 Sistema LATCH . . . . . . . . . .29
10.0 Uso del sistema de seguridad CON
el arnés incorporado. . . . . . . . 30-35
17.0 Eliminar el soporte de
la espalda. . . . . . . . . . . . . . . . 52-54
18.0 Asegurar al niño con el cinturón del
vehículo con traba de posicionamiento
para el cinturón del hombro . 55-58
11.0 Asegurar el sistema de seguridad para
niños en su vehículo. . . . . . . . . . .36
19.0 Uso del anclaje . . . . . . . . . . . . . .59
19.1 Cómo guardar el LATCH
y anclaje . . . . . . . . . . . . . . .60
20.0 Uso en aeronaves . . . . . . . . . . . .61
21.0 Accesorios . . . . . . . . . . . . . . . . . .62
11.1 Uso de un sistema de seguridad
CON el arnés incorporado . .36
11.2 Con un cinturón para la falda o
falda/hombro del vehículo....36-37
21.1 Fundas del arnés y
11.3 Con LATCH. . . . . . . . . . . 38-39
del soporte del cuerpo . . . . .62
12.0 Asegurar a su niño al sistema
de seguridad. . . . . . . . . . . . . . 40-41
13.0 Cómo sacar el arnés . . . . . . . 42-46
14.0 Uso del sistema de seguridad
SIN el arnés incorporado . . . . 47-49
15.0 Asegurar al niño y al asiento
de seguridad en el vehículo . . . . .50
22.0 Pie reclinatorio . . . . . . . . . . . . . . .63
23.0 Atención y mantenimiento . . . . . .64
23.1 Proceso de limpieza de la
hebilla . . . . . . . . . . . . . . . . .65
24.0 Para sacar la funda del asiento . .66
25.0 Cómo guardar el manual
del dueño.. . . . . . . . . . . . . . . . . . .67
26.0 Piezas de repuesto y garantía . . .68
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1.0 Advertencias a padres y otros usuarios
ADVERTENCIA
NUNCA PONGA ESTE SISTEMA DE SEGURIDAD PARA NIÑOS
EN UN ASIENTO DEL VEHÍCULO EQUIPADO CON UNA
BOLSA DE AIRE DELANTERA. Si la bolsa de aire se inÀaꢀ puede
golpear al niño y al sistema de seguridad para niños con mucha
fuerza y causar lesiones serias o la muerte de su niño. Consulte
el manual del dueño del vehículo para obtener información sobre
la instalación de las bolsas de aire laterales y del sistema de
seguridad para niños.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ADVERTENCIA
No usar debidamente este sistema de seguridad para niños aumenta el riesgo de lesiones serias
o la muerte en una curva cerradaꢀ parada repentina o accidente. La seguridad de su niño depende
de que usted instale y use este sistema de seguridad para niños correctamente.
A pesar de que el uso de este sistema de seguridad para niños parezca ficil de descifrarꢀ es muy
importante LEER EL MANUAL DEL USUARIO y el manual del usuario del vehículo.
La seguridad de su niño depende de que:
1. Elija el modo correcto de uso del sistema de seguridad para niños según el tamaño
de su niño.
2. Inserte las correas del arnés (si fuera necesario) en las ranuras adecuadas para su niño.
3. Seleccione un lugar adecuado para el sistema de seguridad para niños en su vehículo.
4. Pase debidamente el cinturón de seguridad del vehículo o LATCH.
5. Asegure debidamente el sistema de seguridad para niños en el vehículo usando un
cinturón del asiento diseñado para sujetar a ambos el sistema de seguridad para niños y su
niño o usando el LATCH. Muchos cinturones de seguridad NO son seguros para usar con
este sistema de seguridad para niñosꢀ a pesar de que se pueden colocar ficilmente a través o
alrededor del sistema de seguridad para niños.
6. Asegure debidamente a su niño en el sistema de seguridad para niños.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2.0 Información sobre el registro
Número de modelo:
Fecha de fabricación:
Fecha de compra:
2.1 Registro de su sistema de seguridad para niños
Por favorꢀ complete la información que se solicita mis arriba. El número de modelo y la fecha de
fabricación pueden encontrarse en una etiqueta ubicada debajo del sistema de seguridad para
niños. Llene la tarjeta postal de registro prepagada que se encuentra en el arnés y envíela hoy
mismo.
Los sistemas de seguridad para niños podrán ser retirados del mercado por problemas de
seguridad. Debe registrar este sistema para que lo podamos contactar en dicho caso. Envíe su
nombreꢀ dirección y el número del modelo del sistema y la fecha de fabricación a:
Graco Children’s Products Inc.
Attn: Customer Service, 3 Glenlake Parkway, Atlanta, GA 30328
o llame al 1-800-345-4109
o regístrelo en línea en:
http://www. gracobaby.com/carseatregistration
2.2 Para obtener información sobre el retiro de productos
del mercado
Llame a la Línea telefónica de seguridad del vehículo del gobierno de EE.UU.
al:1-888-327-4236 (TTY: 1-800-424-9153), o visite http://www.NHTSA.gov o
llame a Graco al: 1-800-345-4109 o www.gracobaby.com
Download from Www.Somanuals.com. All Manuals Search And Download.
6
2.3 Si necesita ayuda
Por favorꢀ comuníquese con el Departamento de Servicio al Cliente con cualquier pregunta que
pudiera tener sobre piezasꢀ uso o mantenimiento. Cuando se ponga en contacto con nosotrosꢀ por
favor tenga listo el número de modelo y la fecha de fabricación del producto para que lo podamos
ayudar más e¿cientemente. Estos números se encuentran en una etiqueta ubicada en el sistema
de seguridad p ara niños.
EE.UU.: 1-800-345-4109 o www.gracobaby.com
www.cpsc.gov www.NHTSA.gov www.seatcheck.org
3.0 Información útil
3.2 Vida útil del sistema de seguridad para
3.1 &ertiÀcación
ESTE SISTEMA PARA
NIÑOS CUMPLE con
todas las Normas
niños
DEJE de usar este sistema de seguridad para niños y
tírelo a la basura 10 años después de la fecha de
fabricación. Busque este etiqueta en el trasero del
asiento de seguridad:
Federales de Seguridad
para Vehículos Automotor
y ha sido certi¿cado para el
uso en vehículos
MODEL
NAME
Date of Manufacture
automotores. Ha sido
year
month
day
certi¿cado para uso en
aeronaves solamente
cuando se lo usa con el
arnés incorporado. Cuando
se lo usa como silla alta sin
el arnésꢀ este sistema NO
ha sido certi¿cado para ser
GRACO CHILDREN'S PRODUCTS, INC.
ATLANTA, GA 30328
Made in China
1-800-345-4109
3.3 Sistema de seguridad para niños usado
Graco Children’s Products Inc. desaconseja prestar o dar a otros el
usado en aeronDaovwesn.load fromsWiswtewm.Saodmeansueaglus.rcidoamd. Aplal rMaanniuñaolss.Search And Download.
7
4.0 Características
Download from Www.Somanuals.com. All Manuals Search And Download.
8
La traba de seguridad se
guarda en la parte trasera
del sistema de seguridad
para niños. Necesitará
usarlo con ciertos tipos de
cinturones de seguridad de
automóviles.
Las Normas Federales
para Seguridad de Auto-
móviles de Estados Unidos
han de¿nido un sistema de
instalación de los sistemas
de seguridad para niños en
los vehículos. El sistema
se denomina LATCH
(anclaje inferior y superior
para niños). El LATCH
debe usarse SOLAMENTE
EN LUGAR del cinturón del
vehículo si el vehículo está
equipado con puntos de
anclaje LATCH. Por favorꢀ
consulte el manual del
dueño del vehículo para
identi¿car las ubicaciones
del LATCH en su vehículo.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
5.0 Armado del sistema de seguridad
Requiere que lo arme un adulto.
MANTENGA LAS CANALETAS
SIN OBSTRUCCIONES
1. Ponga el sistema de seguridad para niños
plano. Agarre la tela del almohadón del asiento en
el lugar donde se sienta para ver las canaletas .
ASEGÚRESE de que todas la manosꢀ dedos y
otros objetos estén lejos de las canaletas.
2. ASEGÚRESE de que las correas del arnés
estén colocadas apretadamente dentro de las
ranuras con forma de T alrededor de los brazos
como se muestra .
MANTENGA LAS CANALETAS
SIN OBSTRUCCIONES
Con la otra manoꢀ levante el respaldo del asiento
para que ambos brazos SE TRABEN en las
canaletas .
Correa del arnés
Brazo
Ranura
en T
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
3. Los brazos deben TRABARSE con un
“CLIC” en las canaletas. El ensamblaje del
asiento debe aparecer como se indica en .
¡CLIC!
Download from Www.Somanuals.com11. All Manuals Search And Download.
4. Sujete 4 nudos elásticos del almohadón del
asiento debajo del asiento exactamente como
se indica en .
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
5. Pase el nudo elástico del almohadón del
asiento a través de la guía del cinturón del
vehículo en el costado del asiento y conéctelo
al gancho como se indica . Repita el proceso
del otro lado.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
6. El ensamblaje está completo.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
6.0 ADVERTENCIA
ꢀ1,1*Ó1ꢀ6,67(0$ꢀ'(ꢀ6(*85,'$'ꢀ3$5$ꢀ
NIÑOS PUEDE GARANTIZAR UNA
PROTECCIÓN CONTRA LESIONES. Sin
embargoꢀ el uso apropiado de este sistema
de seguridad para niños reduce el riesgo de
lesiones serias o la muerte a su niño.
NO use la traba de seguridad en el modo
asiento.
Según las estadísticas de accidentesꢀ LOS
NIÑOS ESTÁN MÁS SEGUROS CUANDO
ESTÁN DEBIDAMENTE SUJETADOS EN
LOS ASIENTOS TRASEROS DEL
NO INSTALE NI USE ESTE SISTEMA DE
SEGURIDAD PARA NIÑOS HASTA QUE HAYA
LEÍDO Y ENTIENDA LAS INSTRUCCIONES
EN ESTE MANUAL Y EN EL MANUAL DEL
DUEÑO DE SU VEHÍCULO. NO deje que otros
instalen o usen el sistema de seguridad para
niños a menos que entiendan cómo usarlo.
VEHÍCULO EN LUGAR DE A LOS
ASIENTOS DELANTEROS. En el caso de
un vehículo con una bolsa de aire para el
pasajero delanteroꢀ consulte el manual del
dueño de su vehículo así como estas
instrucciones para la instalación del sistema
de seguridad para niños.
NO USAR DEBIDAMENTE ESTE SISTEMA
DE SEGURIDAD PARA NIÑOS AUMENTA EL
RIESGO DE LESIONES SERIAS O LA
NUNCA DEJE A SU NIÑO SOLO.
MUERTE EN UNA CURVA CERRADA,
PARADA REPENTINA O ACCIDENTE. Su niño
puede sufrir una lesión en un vehículo aunque
no sufra un accidente. Una parada repentina o
una curva cerrada puede lesionar a su niño si el
sistema de seguridad para niños no
está debidamente instalado o si el niño no está
debidamente sujetado en el sistema de
seguridad paraDnoiñwonsl.oad from Www.Somanuals.co1m5. All Manuals Search And Download.
NUNCA DEJE UN SISTEMA DE
NUNCA USE EL SISTEMA DE SEGURIDAD
PARA NIÑOS SI ESTÁ DAÑADO O TIENE
PIEZAS QUE FALTAN. No use un arnés del
sistema de seguridad para niños o cinturón del
asiento del vehículo o cinturón del LATCH rotoꢀ
deshilachado o dañado.
SEGURIDAD PARA NIÑOS SIN SUJETAR EN
SU VEHÍCULO. Un sistema sin sujetar puede
ser arrojado y podría lesionar a los ocupantes
en una curva cerradaꢀ parada repentina o
accidente. Sáquelo o asegúrese de que esté
debidamente sujetado en el vehículo. Si no
usa el LATCH y anclajeꢀ asegúrese que las
conexiones del LATCH estén debidamente
almacenadas en la parte de atrás del asiento.
EL SISTEMA DE SEGURIDAD PARA NIÑOS
PUEDE ALCANZAR ALTAS TEMPERATURAS
SI QUEDA EN EL SOL. El contacto con estas
partes puede quemar la piel de su niño. Toque
siempre la super¿cie de cualquier pieza de
metal o de plástico antes de poner a su niño
en el sistema de seguridad para niños.
CAMBIE EL SISTEMA DE SEGURIDAD
PARA NIÑOS DESPUÉS DE UN ACCIDENTE
DE CUALQUIER TIPO. Un accidente puede
causar daño invisible al sistema de seguridad
para niños.
NUNCA LE ENTREGUE ESTE SISTEMA DE
SEGURIDAD PARA NIÑOS a otra persona si
no les entrega también este manual.
NO MODIFIQUE EL SISTEMA DE
SEGURIDAD PARA NIÑOS ni use accesorios
o piezas suministradas por otros fabricantes.
ꢀ181&$ꢀ86(ꢀ81ꢀ6,67(0$ꢀ'(ꢀ6(*85,'$'ꢀ
PARA NIÑOS USADO o un sistema de
seguridad cuya historia no conoce.
NO USE ESTE sistema de seguridad para
niños sin armarlo correctamente.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
7.0 Limitaciones de peso y altura
ADVERTENCIA
NO USAR EL SISTEMA DE SEGURIDAD PARA NIÑOS DE MANERA APROPIADA SEGÚN
EL TAMAÑO DE SU NIÑO PODRÍA AUMENTAR EL RIESGO DE LESIONES SERIAS O LA
MUERTE. Las instrucciones para el uso de este sistema de seguridad para niños di¿eren mucho
según el tamaño de su niño. Asegúrese de que usa el sistema de seguridad para niños de la
manera correcta y con las funciones correctas para su niño.
7.1 CON el arnés incorporado
Su niño debe cumplir todos los requisitos:
Peso: 20 a 65 libras (masa entre 9 y 29ꢀ5 Ng)
Altura: 27 a 52 pulgadas (69 a 132 cm) de altura
Por lo menos debe tener un año de edad y debe
poder sentarse sin ayuda
Los hombros están DEBAJO de las ranuras
superiores del arnés. Si los hombros están por
encima de las ranuras superiores del arnésꢀ el niño
es demasiado grande para usar el arnés incorporado.
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
7.2 SIN el arnés incorporado
Su niño debe cumplir todos los requisitos:
Peso: 30 a 100 libras (masa entre 13ꢀ6 y 45 Ng)
Altura: 38 a 57 pulgadas (96 a 145 cm) de altura
aproximadamente de 3 a 10 años de edad
el cinturón del hombro DEBE cruzar los
hombros del niño como se indica y la parte
de la falda del cinturón debe estar baja en la
cadera del niño.
Los oídos del niño están DEBAJO de la parte
superior del asiento. Si la parte de arriba de los
oídos se encuentran arriba de la parte superior
del asientoꢀ el niño es demasiado grande para
el asiento.
Si el niño pesa entre 30 y 65 libras y los
hombros se encuentran por debajo de las
ranuras superiores del arnés, recomendamos
enfáticamente el uso del arnés incorporado
mientras sea posible (hasta las 65 libras).
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
7.3 SIN el soporte de la espalda
Su niño debe cumplir todos los requisitos:
pesar entre 40 y 100 libras
(masa entre 18 y 45 Ng)ꢀ
y tener entre 40 y 57 pulgadas
(101 y 145 cm) de alturaꢀ
aproximadamente de 4 a 10 años de edad
el cinturón del hombro DEBE cruzar los
hombros del niño como se indica y la parte
de la falda del cinturón debe estar baja en la
cadera del niño.
Cuando usa el asientoꢀ los oídos de su
niño deben estar debajo de la parte de
arriba del almohadón del asiento del
vehículo/apoyacabeza.
Su asiento Graco se puede usar con o sin el
soporte de la espalda siempre que se cumplan
todos los requisitos.
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
8.0 Cómo elegir un lugar apropiado para el asiento
del vehículo
8.1 Requisitos del lugar del asiento del vehículo
LA COLOCACIÓN INADECUADA DEL SISTEMA DE
SEGURIDAD PARA NIÑOS AUMENTA EL RIESGO DE
ADVERTENCIA
SUFRIR LESIONES SERIAS O LA MUERTE.
Algunas posiciones del asiento en su vehículo podrían no ser seguras para este sistema de seguri-
dad para niños. Algunos vehículos no tienen posiciones del asiento que puedan usarse sin peligro
con el sistema de seguridad para niños. Si no está seguro dónde colocar el sistema de seguridad
para niños en su vehículoꢀ consulte el manual del dueño del vehículo o llame a Graco Children’s
Productsꢀ Inc.ꢀ al 1-800-345-4109.
ꢀEl asiento del vehículo debe mirar hacia
adelante. No use sistemas de seguridad para
niños en los asientos del vehículo orientados
hacia atrás o hacia un lado.
Los niños están más seguros cuando
están debidamente sujetados en las posi-
ciones de sentado en el asiento trasero
del vehículo. Cuando sea posibleꢀ asegure
el sistema de seguridad para niños en la
posición central de sentado directamente
atrás de los asientos delanteros. Sin embargoꢀ
esta posición está algunas veces equipada
solamente con un cinturón para la falda y no
puede usarse con este sistema de seguridad
para niños sin el arnés incorporado.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
8.2 Requisitos del cinturón de seguridad del vehículo
MUCHOS SISTEMAS DE CINTURONES DE
ADVERTENCIA
SEGURIDAD NO SON SEGUROS PARA USAR CON
ESTE SISTEMA DE SEGURIDAD PARA NIÑOS.
EL CINTURÓN DE SEGURIDAD DEL VEHÍCULO DEBE HABER SIDO DISEÑADO PARA
RETENER AL SISTEMA DE SEGURIDAD PARA NIÑOS DE MODO AJUSTADO EN TODO
MOMENTO. Preste mucha atención a estos sistemas ya que muchos de los sistemas de
cinturones de seguridad que no son seguros se parecen mucho a los que no presentan peligro.
Si no está seguroꢀ consulte el manual del dueño del vehículo o llame a Graco Children’s
Productsꢀ Inc.ꢀ al 1-800-345-4109.
8.3 Sistemas SEGUROS del cinturón de seguridad
del vehículo
LOS SIGUIENTES SISTEMAS PUEDEN USARSE CON SU SISTEMA DE SEGURIDAD PARA
NIÑOS, SI la ubicación del asiento cumple todos los otros requisitos de estas instrucciones y las
del manual del dueño del vehículo. El LATCH puede usarse en lugar de los siguientes sistemas
de seguridad del vehículo si su vehículo está equipado con puntos de anclaje LATCH. Por favorꢀ
consulte el manual del dueño del vehículo para identificar las ubicaciones del LATCH.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
8.4 Para el arnés incorporado solamente
Cinturón para la falda - ajustado
manualmente
Cuando se activa la hebillaꢀ el cinturón se
ajusta manualmente tirando del exceso del
cinturón.
ꢀ Cinturón para la falda con retractor de
seguridad automático (ALR por sus
siglas en inglés)
El retractor de seguridad automático no
permitirá que el cinturón de seguridad
para la falda se extienda una vez que está
sujetado en la hebilla. Ajuste el cinturón
pasando el cinturón por el retractor
mientras empuja con fuerza el sistema de
seguridad para niños hacia abajo.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
8.5 Con O sin el arnés incorporado
ꢀ &RPELQDFLyQꢀFLQWXUyQꢀSDUDꢀODꢀIDOGDꢀ\ꢀHOꢀ
hombro con placa de seguridad con traba
Una vez que esté trabado en la hebillaꢀ este tipo
de cinturón tiene una placa de seguridad que no
permitirá que la parte del cinturón para la falda se
afloje. El cinturón se ajusta tirando con fuerza de la
parte del hombro del cinturón del vehículo mientras
empuja con fuerza el sistema de seguridad para
niños hacia abajo.
ꢀ &RPELQDFLyQꢀFLQWXUyQꢀSDUDꢀODꢀIDOGDꢀ\ꢀHOꢀ
hombro con placa de seguridad con traba
móvil Este cinturón tiene una placa de
seguridad que se mueve libremente a lo largo del
cinturón.
ꢀ Este cinturón DEBE convertirse para prevenir el
movimiento de la parte de la falda del cinturón.
Debe usar la traba de seguridad provista con el
sistema de seguridad para niñosꢀ a menos que el
cinturón de seguridad del asiento de su vehículo
pueda convertirse de otra manera como se describe
en el manual del dueño del vehículo.
Traba de seguridad
Cuando usa el asiento SIN el arnés
incorporadoꢀ NO debe usar la traba
de seguridad.
Download from Www.Somanuals.co2m3. All Manuals Search And Download.
8.6 Para instalar la traba de seguridad
1. Ajuste el cinturón trabado empujando con fuerza el sistema de seguridad para niños hacia
abajo y tirando con fuerza el cinturón para el hombro.
2. Mientras empuja el asiento hacia abajoꢀ apriete las dos correas juntas detrás de la lengua de
la hebilla. Destrabe el cinturón sin permitir que se mueva.
3. Sujete la traba de seguridad a los cinturones para el
hombro y la falda como se indica .
4. Vuelva a poner el cinturón en la hebilla. Verifique que el
cinturón para la falda no se mueve tirando con fuerza. Si el
cinturón se afloja o se alargaꢀ repita el procedimiento. Saque la
traba de seguridad cuando no usa el sistema de seguridad para
niños. Guárdelo debajo de la lengüeta detrás del asiento.
Pruebe la instalación para ver si el sistema de seguridad para
niños ha quedado bien sujetado. Si no ha quedado bien
sujetadoꢀ quizá sea necesario ajustar más el cinturón:
Desabroche el cinturón de seguridad del vehículo.
Sujete los cinturones y saque la traba de seguridad.
Acorte la longitud de la parte del cinturón para la faldaꢀ tirándolo
1/2 pulg. (1,25cm)
de la placa de cierre. Vuelva a colocar la traba de seguridad.
Abroche el cinturón de seguridad del vehículo. Oprima el siste-
ma de seguridad para niños hacia más abajo sobre el
almohadón del asiento del vehículo para poder abrochar el
cinturón de seguridad del vehículo. Pruebe la instalación
para ver si el sistema de seguridad para niños ha quedado bien
sujetado. Si noꢀ repita los pasos anteriores hasta que quede bien
sujetado.
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
8.7 Sistemas PELIGROSOS de cinturones de vehículos
NO USE NINGUNO DE LOS SIGUIENTES SISTEMAS PARA SUJETAR EL SISTEMA DE
SEGURIDAD PARA NIÑOS. El LATCH puede usarse EN LUGAR de los siguientes sistemas de
cinturón peligrosos si su vehículo está equipado con puntos de anclaje LATCH. Por favorꢀ consulte
el manual del dueño del vehículo para identificar las ubicaciones donde debe instalarse el LATCH.
NUNCA USE sistemas de cinturones peligrosos.
Cinturón para la falda con retractor de
traba de emergencia (ELR por sus siglas
en inglés)
Este cinturón de seguridad para la falda se
mantiene flojo y puede moverse hasta que se
trabe en un accidente o parada repentina.
ꢀ &RPELQDFLyQꢀGHꢀFLQWXUyQꢀSDUDꢀODꢀIDOGDꢀ\ꢀHOꢀ
hombro con retractor
Cada correa tiene un retractor en una punta y
está conectada a la placa de
seguridad en la otra punta.
ꢀ &LQWXUyQꢀSDVLYRꢀꢁꢀ&LQWXUyQꢀSDUDꢀHOꢀKRPEURꢀRꢀ
falda montado en la puerta
Download from Www.Somanuals.co2m5. All Manuals Search And Download.
ꢀ &LQWXUyQꢀSDVLYRꢀꢁꢀ&LQWXUyQꢀSDUDꢀODꢀIDOGDꢀFRQꢀ
cinturón para el hombro motorizado
NO use los cinturones del vehículo que estén
conectados a la puerta de manera alguna o que
se muevan a través de un carril para rodear
automáticamente al pasajero cuando se cierra la
puerta
ꢀ &LQWXUyQꢀSDUDꢀODꢀIDOGDꢀTXHꢀHVWiꢀPiVꢀDGHODQWHꢀ
del pliegue del asiento
Los cinturones de seguridad del vehículo
ubicados delante del pliegue del asiento quizá
nosujeten bien el sistema de seguridad para
niños. Consulte el manual del propietario del
vehículo o visite el concesionario del vehículo
para informarse sobre los requisitos de
instalación de los asientos de automóvil.
ꢀ6LꢀHVWiQꢀDSUREDGRVꢀSDUDꢀVXꢀXVRꢀFRQꢀHO
ꢀꢀꢀꢀꢀVLVWHPDꢀGHꢀVHJXULGDGꢀSDUDꢀQLxRVꢁꢀ
ꢀꢀꢀꢀꢀLQVWiOHORꢀ\ꢀFRPSUXHEHꢀVLꢀHVWiꢀSHUIHFWDPHQWH
ꢀꢀꢀꢀꢀLQVWDODGRꢀWLUDQGRꢀGHOꢀVLVWHPDꢀGHꢀVHJXULGDG
ꢀꢀꢀꢀꢀSDUDꢀQLxRVꢀGHꢀDWUiVꢀKDFLDꢀGHODQWHꢂꢀ6Lꢀ
ꢀꢀꢀꢀꢀHOꢀDVLHQWRꢀGHꢀVHJXULGDGꢀSDUDꢀQLxRVꢀVH
ꢀꢀꢀꢀꢀGHVSOD]DꢀKDFLDꢀGHODQWHꢁꢀ12ꢀXVHꢀHVWRV
ꢀꢀꢀꢀꢀFLQWXURQHVꢀGHꢀVHJXULGDGꢂ
Download from Www.Somanuals.co2m6. All Manuals Search And Download.
9.0 LATCH
9.1 ¿Qué es el LATCH?
Las Normas Federales de Seguridad para Vehículos Automotor de Estados Unidos han
definido un sistema de instalación de los sistemas de seguridad para niños en los vehículos.
El sistema se denomina LATCH.
LATCH quiere decir: Anclaje inferior y superior para niños (Lower Anchors and Tethers for
CHildren).
El sistema LATCH del vehículo consta de un punto de anclaje superior y dos puntos de
anclaje inferiores.
Los manuales del propietario de algunos vehículos emplean el término ISOFIX para definir al
nuevo sistema de anclaje para sistemas de seguridad para niños. Este sistema de seguridad
para niños con sistema LATCH también se puede usar en los asientos del vehículo equipados
con ISOFIX.
Los vehículos nuevos tienen uno o más asientos equipados con sistemas de anclaje LATCH.
Si el vehículo viene equipado con el sistema LATCHꢀ se pueden ver los puntos de anclaje
inferiores en el pliegue del asiento del vehículo. Si no están visiblesꢀ pueden estar marcados
con este símbolo
.
COMPRUEBE la ubicación de los puntos de anclaje superiores del vehículo en el manual del
propietario del vehículo. Se podrían haber identificado usando uno de los símbolos de anclaje
como se indica
.
Utilice SOLAMENTE el LATCH en un sistema de seguridad para niños en el asiento
recomendado por el fabricante del vehículo.
Download from Www.Somanuals.co2m7. All Manuals Search And Download.
NOTA: Algunos fabricantes de vehículos usan calificaciones más bajas del peso para los conectores
LATCHꢀ de manera que debe consultar el manual del propietario del vehículo o llamar al fabricante del
vehículo para confirmar los límites de los conectores LATCH de su vehículo.
Use el cinturón del vehículo (no los conectores LATCH) en instalaciones para niños que pesen más de 48
libras (21ꢀ7 Ng).
Puntos de anclaje
superiores del
9HDꢀHOꢀPDQXDOꢀGHOꢀSURSLHWDULRꢀ
GHꢀVXꢀYHKtFXORꢀSDUDꢀLQIRUPDUVHꢀ
VREUHꢀODVꢀXELFDFLRQHVꢀH[DFWDVꢁꢀ
vehículo
ODꢀLGHQWLILFDFLyQꢀGHꢀORVꢀ
DQFODMHVꢀ\ꢀORVꢀUHTXLVLWRVꢀ
SDUDꢀVXꢀXVRꢀFRQꢀXQꢀ
VLVWHPDꢀGHꢀVHJXULGDGꢀ
SDUDꢀQLxRVꢂ
Puntos de
anclaje
inferiores del
vehículo
Un asiento típico de
un vehículo de pasajeros. Otros
tipos de vehículos podría tener
el sistema LATCH en otros
lugares.
Pliegue del
asiento del
vehículo
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
9.2 Sistema LATCH
El sistema LATCH consiste en un
cinturón deanclaje inferior
permanente y una correa deanclaje
superior.
Los puntos de anclaje LATCH
inferiores del vehículo se definen
como a 11 pulgadas desde el centro
de un anclaje LATCH al centro de
otro anclaje LATCH.
Si lo permite el manual del propietario
de su vehículo, la posición de
sentado en el centro se puede usar si
el espacio del anclaje es 11pulgadas
o más.
Utilice el sistema LATCH
ÚNICAMENTE en la posición del
asiento recomendado por el
fabricante del vehículo.
3XQWRꢀGHꢀDQFODMH
VXSHULRUꢀGHO
YHKtFXOR
$QFODMHꢀVXSHULRUꢀ
GHOꢀVLVWHPDꢀGHꢀ
VHJXULGDGꢀSDUDꢀQLxRV
3XQWRVꢀGH
DQFODMHꢀLQIHULRUHV
GHOꢀYHKtFXORV
&LQWXUyQꢀGH
DQFODMHꢀLQIHULRU
Download from Www.Somanuals.co2m9. All Manuals Search And Download.
10.0 Uso del sistema de seguridad CON
el arnés incorporado
NO AJUSTAR DEBIDAMENTE LAS CORREAS DEL
ADVERTENCIA ARNÉS DEL NIÑO AUMENTA EL RIESGO DE SUFRIR
LESIONES SERIAS O LA MUERTE EN CASO DE UNA
CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Ajuste apretadamente los cinturones
provistos con este sistema de seguridad alrededor de su niño. Una correa tensa no deberá estar
floja. Se mantiene en una línea recta sin doblarse. No aprieta la carne del niño ni empuja el
cuerpo del niño en una posición que no sea natural.
1. Afloje las correas del arnés levantando la
palanca de ajuste del arnés en la parte de
adelante del asiento cerca de la correa de
ajuste y tirando las correas hacia usted .
2. Abra la traba del arnés .
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
3. Destrabe las correas del arnés .
4. Verifique la correa para la entrepierna:
Elija la posición que esté más cercana pero
no debajo de su niño.
Para cambiar la posición de la correa para
la entrepiernaꢀ empuje la correa para la
entrepierna por la parte de abajo del
sistema de seguridad para niños y agárrela
desde arriba para tirarla .
Vuelva a insertar la correa para la entrepierna
en la posición deseada. Asegúrese de que la
correa para la entrepierna no esté doblada
cuando la inserta en la ranura. Tire de ella para
asegurarse de que esté bien instalada.
Download from Www.Somanuals.co3m1. All Manuals Search And Download.
5. Las correas del arnés deben pasar por
las ranuras a la altura o apenas por encima
de los hombros .
Si las correas están en las ranuras correctasꢀ
pase a la página 36.
6. Para ajustar las correas del arnés:
a) De vuelta el asiento para poder acceder a la
parte trasera del asiento.
b) Desde atrás del asiento saque las correas
de la placa de metal
.
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
7. Pase las puntas de la
correa por las ranuras al frente
del asiento ¡ꢀy vuelva a
insertarlas en las ranuras
deseadas ¢. Verifique que las
correas no estén dobladas.
¡
¢
ASEGÚRESE de que las correas
del arnés estén insertadas en las
mismas ranuras en cada costado
del asiento.
Saque el apoyo del cuerpo
cuando no usa el arnés en la
posición más baja de la ranura.
Download from Www.Somanuals.co3m3. All Manuals Search And Download.
8. Use las guías de plástico de las
correas como guía para pasar el
arnés por encima de los rodillos
rojos. Asegúrese de pasar las
correas SOBRE los rodillos
rojos y las guías de plástico de
11
Las
correas
11
del arnés
DEBEN
pasar por
encima de
los rodillos
rojos.
las correas
.
Asegúrese que la correa del
anclaje no interfiera cuando
cambia la posición de la altura
de la correa del arnés.
9. Si no se pasan las correas
SOBRE los rodillos rojosꢀ el
armado es incorrecto y DEBE
corregirse antes de usar el
sistema de seguridad para niños.
12
10. Vuelva a armar las correas
sobre la placa de unión de metal
exactamente como se indica 12.
Verifique que las correas estén
completamente dentro de las
ranuras y que no estén dobladas.
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
11. Verifique que las correas estén insertadas
al mismo nivel. Tire del arnés para asegurarse
13
13
que esté asegurado
.
RECUERDE verificar la posición de las correas
para la entrepierna y del hombro a medida
que su niño crece y muévalas a la posición
siguiente cuando sea necesario. Las correas
del arnés deben pasar por las ranuras a la
altura o apenas por encima de
los hombros.
Download from Www.Somanuals.co3m5. All Manuals Search And Download.
11.0 Asegurar el sistema de seguridad para niños
en su vehículo
NO USAR DEBIDAMENTE ESTE SISTEMA DE
SEGURIDAD PARA NIÑOS EN EL VEHÍCULO
ADVERTENCIA
AUMENTA EL RIESGO DE LESIONES SERIAS O
LA MUERTE DEL NIÑO EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE.
Cumpla detenidamente estas instrucciones y las del manual del dueño de su vehículo para
asegurarse que el sistema de seguridad para niños esté debidamente ubicado y asegurado
apretadamente en todo momento.
11.1 Uso del sistema de seguridad CON el
arnés incorporado
11.2 Con un cinturón para la falda o falda/hombro
del vehículo:
Los anclajes inferiores deben estar guardados cuando usa el cinturón del vehículo.
Ver la Sección 19.1ꢀ Cómo guardar el LATCHꢀ página 60.
1. Coloque el sistema de seguridad para niños firmemente contra el
respaldo del asiento del vehículo que mire hacia adelante.
2. Pase el cinturón del asiento a través de las aberturas de la
ranura del cinturón:
Para el cinturón del hombro/falda
Para el cinturón para la falda solamente
3. Trabe el cinturón de vehículo. El cinturón del vehículo no debe
Download from Www.Somanuals.co3m6. All Manuals Search And Download.
estar doblado.
4. Ajuste el cinturón de seguridad del vehículo
Empuje con fuerza hacia abajo con la rodilla o la mano
libre en el medio del asiento para automóvil .
Luego tire y ajuste el cinturón del vehículo.
Para obtener más información sobre cómo ajustar el
cinturón de su sistema del cinturón de seguridadꢀ
vea la Sección 8.0ꢀ Cómo elegir un lugar apropiado para el
asiento del vehículoꢀ pág. 20ꢀ o el manual del dueño de
su vehículo.
5. Si hay un anclaje superior del vehículo, asegure el
anclaje para mantener el asiento en su lugar.
Vea la Sección 19.0 Uso del anclajeꢀ página 59.
Cuando no se usa el anclajeꢀ engánchelo en la barra de
almacenamiento del anclaje ubicada atrás del asientoꢀ
vea la página 60.
6. Verificación de seguridad para una instalación segura
Realice esta prueba cada vez que viaja con su niño.
Tuerza y tire el sistema de seguridad para niños hacia
adelante y ambos costados para asegurarse que el cinturón
del vehículo no se alarga o afloja y que el sistema de
seguridad para niños no se mueve con facilidad. El sistema
de seguridad para niños no deberá moverse de un lado a otro
ni hacia adelante más de 1 pulgada (2ꢀ5 cm) .Si el sistema
de seguridad para niños no está asegurado o está flojoꢀ repita
el procedimiento O busque otro lugar para el sistema de seguridad
para niñosꢀ vea la Sección 8.0 Cómo elegir un lugar apropiado para
el asiento del vehículoꢀ pág. 20.
Download from Www.Somanuals.co3m7. All Manuals Search And Download.
11.3 Con LATCH
Use el cinturón del vehículo (no los conectores LATCH)
en instalaciones para niños que pesen más de 48 libras
(21ꢀ7 Ng). NOTA: Algunos fabricantes de vehículos usan
calificaciones más bajas del peso para los conectores
LATCHꢀ de manera que debe consultar el manual del
dueño del vehículo o llamar al fabricante del vehículo
para confirmar los límites de los conectores LATCH
de su vehículo.
1. Desenganche el LATCH de las barras de
almacenamiento en los costados del asiento. Para
facilitar la instalaciónꢀ extienda el LATCH hasta el
máximo.
2. Coloque el sistema de seguridad para niños
firmemente contra el respaldo del asiento del vehículo
que mire hacia adelante.
3. Enganche los conectores LATCH en los
anclajes inferiores del vehículo . Tire con
firmeza de las conexiones para estar seguro
de que estén sujetadas. El cinturón debe
mantenerse en posición plana sin doblarse.
4. Tensione el LATCH empujando con fuerza hacia abajo
sobre el sistema de seguridad para niños y tirando el
cinturón de ajuste .
5. Si necesita sacar el LATCH para volver a ajustarloꢀ
empuje el botón en la hebilla del LATCH para
Download from Www.Somanuals.co3m8. All Manuals Search And Download.
aflojar la correa.
6. NUNCA sujete dos conectores LATCH en un solo
punto de anclaje LATCH del vehículo a menos que el
fabricante lo haya permitido específicamente .
7. Todas las posiciones del asiento LATCH tienen
puntos de anclaje. Asegure la parte de arriba del
asiento usando la correa de anclaje. Vea la Sección
19.0 Uso del anclajeꢀ página 59.
8. Verificación de seguridad para una
instalación segura
Realice esta prueba cada vez que viaja con su niño.
Tuerza y tire el sistema de seguridad para niños hacia
adelante y ambos costados para asegurarse que el
cinturón del LATCH no se alarga o aÀoja y que el
sistema de seguridad para niños no se mueve con
facilidad. El sistema de seguridad para niños no
deberá moverse de un lado a otro ni hacia adelante
más de 1 pulgada (2ꢀ5 cm) . Si el sistema de
seguridad para niños no está asegurado o está flojoꢀ
repita el procedimiento O busque otro lugar para el
sistema de seguridad para niñosꢀ vea la Sección 8.0
Cómo elegir un lugar apropiado para el asiento del
vehículoꢀ pág. 20.
Download from Www.Somanuals.co3m9. All Manuals Search And Download.
12.0 Asegurar a su niño al sistema de seguridad
NO USAR DEBIDAMENTE ESTE SISTEMA DE
ADVERTENCIA
SEGURIDAD PARA NIÑOS EN EL VEHÍCULO
AUMENTA EL RIESGO DE LESIONES SERIAS O LA
MUERTE DEL NIÑO EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. En
un accidenteꢀ el sistema de seguridad para niños NO ofrece protección a su niño a menos que
las correas del arnés estén debidamente aseguradas. Cumpla estas instrucciones detenidamente
para asegurar debidamente a su niño.
ꢀ AJUSTE EL SISTEMA DE ARNÉS APRETADAMENTE
CADA VEZ que coloca a su niño en el sistema de
seguridad para niños.
ꢀ Evite usar ropas abultadas.
1. Coloque al niño en el sistema de seguridad para niños con
la espalda del niño plana contra el respaldo del asiento para
automóvil.
2. Coloque las correas del arnés sobre los hombros del niño
e inserte las lengüetas en la hebilla hasta que se traben en su
lugar con un “clic”.
¡CLIC!
VERIFIQUE que las correas no estén dobladas.
VERIFIQUE que el arnés esté debidamente apretado tirando
de las correas.
NO use el sistema de seguridad para niños si el arnés no
se traba.
Download from Www.Somanuals.co4m0. All Manuals Search And Download.
3. Asegure la traba del arnés . Coloque la
traba del arnés en el medio del pecho del niñoꢀ
nivelado con las axilas.
4. Tense las correas del arnés tirando de la
correa de ajuste adelante del asiento .
5. Asegúrese que las correas estén planas y
ajustadas contra los hombros y muslos del
niño. No debería poder apretar las
correas del arnés. Una correa tensa no deberá
estar floja. Se mantiene en una línea recta sin
doblarse. No aprieta la carne del niño ni empuja
el cuerpo del niño en una posición que no sea
natural.
Download from Www.Somanuals.co4m1. All Manuals Search And Download.
13.0 Cómo sacar el arnés
1. Saque las correas del arnés. Abra la traba
del pecho y la hebilla del arnés .
2. Mire hacia la parte trasera del asiento y
saque las correas del cinturón de la placa de
unión de metal ꢀcomo se indica.
3. Saque la correa para la entrepierna
empujando el retén de la correa ꢀde la
parte de abajo del asientoꢀ hacia arriba por la
ranura.
Download from Www.Somanuals.co4m2. All Manuals Search And Download.
4. Agarre la hebilla de la correa para la entrepierna
y tírela completamente hacia afuera .
ꢀ
5. Tire de la correa de ajuste ꢀdel frente del
asiento para trabar la placa de unión de metal en
su lugar.
ꢀ
6. Agarre las correas para el hombro y tírelas
hacia afuera de sus ranuras respectivas del
almohadón del asiento.
Saque el soporte del cuerpo y la almohadilla para
la entrepierna.
Download from Www.Somanuals.co4m3. All Manuals Search And Download.
7. En la parte de atrás del asientoꢀ desconecte 2
correas de elástico del almohadón del asiento de
abajo de los ganchos como se indica en .
8. También desconecte las correas elásticas que
pasan por las guías del cinturón del vehículo en
los costados del asiento como se indica en
Repita el proceso del otro lado.
.
9. Tire el almohadón del asiento para que
muestre los botones rojos como se indica en el
lugar del asiento ¡. Deslice los botones para
liberar el soporte de la espalda de la base y
bájela a una posición plana. Agarre el soporte
de la espalda para evitar que se caiga y golpee
algo.
¡
Download from Www.Somanuals.co4m4. All Manuals Search And Download.
10.Saque las correas del arnés de los brazos
como se indica en ¢.
Guarde el soporte del cuerpoꢀ fundas del
arnésꢀ funda de la almohadilla para la
entrepierna y correas del arnés en un lugar
seguro para uso futuro.
¢
Correa del arnés
Brazo
Ranura en T
11. Saque la tela del almohadón del asiento
y luego levante el respaldo del asiento para
que ambos brazos SE TRABEN en las
11
11
canaletasꢀꢀꢀꢀ.
Deberá escuchar un CLIC cuando se traben
los brazos en las canaletas.
ASEGÚRESE de que las canaletas no tengan
obstrucciones.
MANTENGA LAS CANALETAS
SIN OBSTRUCCIONES
Download from Www.Somanuals.co4m5. All Manuals Search And Download.
12. Ponga el almohadón del asiento entre el
espacio del soporte de la espalda y el lugar
del asiento para permitir 2 correas elásticas
salgan por la parte trasera del asiento.
13. Sujete 2 correas elásticas del almohadón
del asiento a los ganchos en la parte trasera
del sistema de seguridad para niños como se
indica en 12 .
12
14. Pase la correa elástica del almohadón del
asiento a través de la guía del cinturón del
vehículo en el costado del asiento y conéctela
al gancho como se indica. Repita el
13
procedimiento del otro lado
.
13
Invierta las instrucciones para volver a instalar
el arnés. Vea la Sección 10.0 páginas 30-35
para obtener la vía correcta del arnés.
Download from Www.Somanuals.co4m6. All Manuals Search And Download.
14.0 Uso del sistema de seguridad SIN el arnés incorporado
NO USAR DEBIDAMENTE ESTE SISTEMA DE
SEGURIDAD PARANIÑOS EN ELVEHÍCULOAUMENTA
ADVERTENCIA
EL RIESGO DE LESIONES SERIAS O LA MUERTE DEL
NIÑO EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. En un accidenteꢀ el
sistema de seguridad para niños NO ofrece protección a su niño a menos que las correas del
arnés estén debidamente aseguradas. Cumpla estas instrucciones detenidamente para asegurar
debidamente a su niño.
ADVERTENCIA! Use solamente el sistema de
cinturón del vehículo para el hombro y la falda
cuando sujeta a su niño en el asiento. El LATCH
no asegurará su niño al asiento. Use solamente el
sistema de cinturón del vehículo para el hombro y
la falda cuando sujeta a su niño en el asiento .
Los cinturones del vehículo DEBEN estar planos
contra el niño y no DEBEN estar doblados.
NUNCA use un cinturón del vehículo para la falda
a través del frente de su niño .
INCORRECTO
Download from Www.Somanuals.co4m7. All Manuals Search And Download.
NO use el cinturón del hombro flojo o puesto
debajo del brazo .
NO ponga el cinturón de seguridad para el
hombro detrás de la espalda del niño .
INCORRECTO
INCORRECTO
La parte de la falda del cinturón para la falda
y el hombro DEBE estar bajo y apretado en la
caderaꢀ apenas tocando los muslos.
NO deje que su niño salga por abajo
del asiento .
Si el niño no puede mantener el cinturón de
seguridad del vehículo debidamente colocadoꢀ
NO use este asiento. Use un sistema de
seguridad para niños diferente.
NO ponga el cinturón del vehículo sobre la
parte de arriba de los apoyabrazos .
INCORRECTO
INCORRECTO
Download from Www.Somanuals.co4m8. All Manuals Search And Download.
El apoyacabeza del asiento del vehículo no
debe crear un espacio entre el asiento del
vehículo y el asiento de seguridad . El frente
del asiento de seguridad NO DEBE quedar
suspendido del frente del asiento del vehículo
.
INCORRECTO
INCORRECTO
Download from Www.Somanuals.co4m9. All Manuals Search And Download.
15.0 Asegurar al niño y al asiento de seguridad
en el vehículo
1. Coloque el asiento para automóvil firmemente contra el respaldo
de un asiento del vehículo que mira hacia adelante equipado
solamente con un cinturón para la falda y el hombro.
2. Coloque al niño en el asiento de seguridad para automóvil con la
espalda del niño plana contra el respaldo del asiento de seguridad
para automóvil.
3. Pase el cinturón para la falda/hombro por la guía del cinturón
del hombro no debajo de la guía del cinturón del hombro .
El cinturón debe pasar sobre la guía del cinturón del vehículo .
Sujete la hebilla y tire del cinturón para el hombro para ajustarlo.
4. Si el cinturón pasa por el cueloꢀ cabeza o cara del niñoꢀ vuelva
a pasar el cinturón sobre el hombro ajustando el soporte de la
cabeza. 9HDꢀODꢀSiJLQDꢀꢃꢄꢁꢀ$MXVWHꢀGHOꢀVRSRUWHꢀGHꢀODꢀFDEH]Dꢂꢀ
5. Verifique que el cinturón para el hombro esté
debidamente colocado sobre el hombro y
apretadamente sobre el niño. Una correa tensa
no deberá estar floja. Se mantiene en una línea
recta sin doblarse. No aprieta la carne del niño
ni empuja el cuerpo del niño en una posición
que no sea natural.
Download from Www.Somanuals.co5m0. All Manuals Search And Download.
16.0 Ajuste del soporte de la cabeza
Cuando se usa con o sin el arnés incorporado.
ANTES de ajustar la altura del soporte de la
cabezaꢀ pida a su niño que se mueva un poco
hacia adelante.
Apriete la manija roja de ajuste de arriba del
asiento y tire el soporte de la espalda hacia arriba
hasta que se trabe en una de las 5 posiciones de
la altura.
Para bajarloꢀ apriete la manija roja de ajuste y
empuje hacia abajo.
VERIFIQUE para asegurarse de que esté
debidamente trabado en una de las 5 posiciones
de la altura tirando hacia arriba del soporte de la
cabeza.
Las guías del cinturón del hombro deben estar
parejas o apenas por encima de los hombros
como lo indica la línea de puntos .
Download from Www.Somanuals.co5m1. All Manuals Search And Download.
17.0 Eliminar el soporte de la espalda
Para usar el asiento SIN el soporte de la
espaldaꢀ saque las correas del arnés si están
colocadas (YHDꢀODꢀVHFFLyQꢀꢄꢅꢂꢆꢀ&yPRꢀVDFDUꢀ
HOꢀDUQpVꢁꢀSiJꢂꢀꢇꢈꢉꢇꢊꢋꢀy luego continúe con los
pasos siguientes:
1. Desenganche 2 correas elásticas inferiores de
la parte de atrás del asiento como se indica .
2. Desenganche la correa elástica de los
ganchos del almohadón del asiento como se
indica. Repita el procedimiento del otro lado .
Download from Www.Somanuals.co5m2. All Manuals Search And Download.
3. Tire el almohadón del asiento para que
muestre los botones rojos como se indica en
. Deslice los botones para liberar el
soporte de la espalda de la base y bájelo a
una posición plana.
Cuando saca el soporte de la espaldaꢀ debe
apoyarlo cuando desliza los botones rojos para
desenganchar el soporte de la espalda de la
base. Asegúrese de que las manosꢀ dedos y
otros objetos no estén detrás del soporte de la
espalda cuando lo saca.
4. Saque la tela del almohadón del asiento del
medio y apriete los botones rojos para liberar
el soporte de la espalda del asiento. Separe el
asiento y el soporte de la espalda .
Download from Www.Somanuals.co5m3. All Manuals Search And Download.
5. Una vez que ha separado el soporte de la
espalda ꢀ guarde el soporte de la espalda
con todas las correas del arnésꢀ soporte de la
cabezaꢀ soporte del cuerpo y funda de la
almohadilla para la entrepierna en un lugar
seguro.
6. Vuelva a conectar las correas elásticas de
atrás del asiento y a través de la guía del
cinturón del vehículo en los costados del asiento
como se indica.
7. El asiento está listo para la instalación.
Para volver a instalar el soporte de la espalda si
fuera necesarioꢀ invierta los pasos de la página 54 a
la página 52.
Download from Www.Somanuals.co5m4. All Manuals Search And Download.
18.0 Asegurar al niño con el cinturón del vehículo con traba
de posicionamiento para el cinturón del hombro
El cinturón del hombro DEBE pasar a través
de los hombros del niño en la zona roja como
se indica .
Si el cinturón del hombro está fuera de
esta zonaꢀ se DEBE usar la traba de
posicionamiento del cinturón del hombro.
Para conectar la traba al asiento de seguridad:
1. Inserte el extremo con el nudo de la correa
a través de la ranura en la parte de atrás del
asiento exactamente como se indica .
Hay una ranura en cada costado del asientoꢀ
la traba de posicionamiento del cinturón del
hombro DEBE estar conectada a través de la
ranura más cercana al lugar donde el cinturón
del hombro del vehículo pasa por el niño.
Download from Www.Somanuals.co5m5. All Manuals Search And Download.
2. Pase la traba y la correa a través del
extremo del nudo ꢀcomo se indica y
tire la correa hacia arriba.
3. NOTA: El extremo liberado de la correa
deberá mirar al frente del asiento.
Download from Www.Somanuals.co5m6. All Manuals Search And Download.
4. Deslice el cinturón del hombro del vehículo por la traba como se indica y tire el extremo libre
de la correa hacia abajo para ajustar la traba contra el hombro del niño.
La parte de la falda DEBE pasar a través de la guía del cinturón del vehículo y estar posicionada
baja en las caderas.
El cinturón NO DEBE estar doblado.
Traba de
posicionamiento del
cinturón del hombro
Traba de
posicionamiento del
cinturón del hombro
VISTA TRASERA DEL NIÑO
SENTADO EN EL ASIENTO
Download from Www.Somanuals.co5m7. All Manuals Search And Download.
5. La parte de la falda del cinturón para la falda y el
hombro DEBE estar bajo y apretado en la caderaꢀ
apenas tocando los muslos.
NO deje que su niño salga por abajo del asiento .
CORRECTO
Download from Www.Somanuals.co5m8. All Manuals Search And Download.
19.0 Uso del anclaje
Todas las posiciones del asiento LATCH tienen puntos de anclaje. Use siempre el anclaje si hay
un sujetador del anclaje en el vehículoꢀ consulte el manual del dueño del vehículo para determinar
los lugares de los sujetadores de anclaje. Si su vehículo no está equipado con un sujetador del
anclajeꢀ podría ser posible instalar uno. Contacte al concesionario de su vehículo para determinar
el lugar correcto del sujetador y su instalación.
1. Verifique que el anclaje esté apretadamente
sujetado al sistema de seguridad para niños.
2. Sujete la presilla del anclaje al punto
de agarre .
3. Ajuste la correa del anclaje apretadamente
.
4. Para aflojarloꢀ oprima el botón mientras tira
del cinturón como se indica .
Download from Www.Somanuals.co5m9. All Manuals Search And Download.
19.1 Cómo guardar los anclajes inferiores y anclaje (LATCH)
1. Para facilitar el almacenamientoꢀ extienda el
LATCH hasta el máximo.
Barras de
almacenamiento
ubicadas en cada
costado del respaldo
del asiento
2. Ubique las barras de almacenamiento en el
respaldo del sistema de seguridad para niños .
3. Sujete los extremos del anclaje y los anclajes
inferiores en sus barras de almacenamiento
respectivas como se indica .
Anclaje
Anclajes
inferiores
4. El almacenamiento de los anclajes inferiors
y el anclaje deberían tener este aspecto cuando
estén terminados .
Anclajes
inferiores
Download from Www.Somanuals.co6m0. All Manuals Search And Download.
20.0 Uso en aeronaves
Este sistema de seguridad ha sido certificado para ser usado en vehículos automotor. Ha sido
certificado para uso en aeronaves SOLAMENTE cuando se lo usa con el arnés incorporado.
Cuando se lo usa como asiento SIN el arnésꢀ este sistema de seguridad NO HA SIDO
CERTIFICADO para ser usado en aeronaves porque las aeronaves no disponen de cinturones
de hombro.
Puntos importantes que recordar:
1. Las aerolíneas tienen ciertas restricciones sobre el uso de los sistemas de seguridad para
niños.
2. Instale el asiento para automóvil en una aeronave de la misma manera en que se instala en un
automóvil con un cinturón para la falda (ver la Sección 11.1ꢀ Cómo usar el sistema de seguridad
para niños CON el arnés incorporadoꢀ página 36).
3. Verifique que el cinturón del asiento de la aeronave sujeta seguramente al sistema de
seguridad para niños en todo momento.
Download from Www.Somanuals.co6m1. All Manuals Search And Download.
21.0 Accesorios (SOLAMENTE en ciertos modelos)
21.1 Fundas del arnés y del soporte del cuerpo
ADVERTENCIA
Para prevenir la eyección en un
accidente o parada repentina:
Asegúrese siempre que las correas del hombro
pasan por las ranuras y están debidamente
instaladas en los hombros.
Nunca deje que el soporte del cuerpo se apile
o pliegue detrás del niño.
Use el soporte del cuerpo solamente con
las ranuras inferiores del arnés.
Asegúrese de que las fundas del arnés no
interfieran con la colocación de la presilla
del pecho a la altura de las axilas.
Download from Www.Somanuals.co6m2. All Manuals Search And Download.
22.0 Pie reclinatorio
Su sistema de seguridad para niños tiene 3
posiciones de reclinación: ajuste el pie
reclinatorio antes de instalar el sistema de
seguridad para niños.
1. Para reclinar el asientoꢀ tire la manija de
reclinación hacia afuera e incline el respaldo
del asiento para extender el pie como se
indica .
2. Para poner el asiento en la posición verticalꢀ
tire la manija de reclinación hacia afuera ꢀe
incline el asiento hacia adelante para retractar
el pie .
Download from Www.Somanuals.co6m3. All Manuals Search And Download.
23.0 Atención y mantenimiento
El uso continuo del sistema de seguridad para niños podría causar daño al asiento del vehículo.
Use una esteraꢀ toalla o frazada fina con el sistema de seguridad para niños para proteger el
tapizado.
Piezas de metal y de plástico: limpiar con un jabón suave y agua fresca. No use blanqueador ni
detergente.
Correas del arnés y correas LATCH: limpie el lugar sucio. No sumerja las correas en agua.
Hacerlo podría debilitar las correas.
Si la hebilla o el ajustador del arnés se pegan o no se mantienen apretadosꢀ verifique que no
haya ningún objeto extraño tal como comidaꢀ suciedadꢀ etc. Saque los objetos con pinzas y/o
límpielas con una escobilla de algodón. Si no puede lograr que el arnés se mantenga apretado
con la hebilla trabada con seguridadꢀ no use este sistema de seguridad para niños. Llame a
Graco al 1-800-345-4109 para comprar un arnés o hebilla de repuesto.
Download from Www.Somanuals.co6m4. All Manuals Search And Download.
23.1 Proceso de limpieza de la hebilla
ADVERTENCIA
Prevenga lesiones graves o la muerte:
La hebilla debe abrocharse correctamente.
Inspeccione y limpie la hebilla periódicamente para
quitar objetos o desechos que podrían impedir la sujeción.
1. De vuelta el sistema de seguridadꢀ pase el retén por la ranura de
la correa de la entrepierna .
2. Para limpiar la hebillaꢀ póngale en una taza de agua tibia y agite
suavemente la hebillaꢀ oprima el botón rojo varias veces mientras
esté sumergida en el agua . NO SUMERJA LAS CORREAS DEL
ARNÉS. NO USE JABONES ni LUBRICANTES. NO use
detergentes para uso doméstico. Nunca lubrique la hebilla.
3. Elimine el exceso de agua y permita que se seque al aireꢀ la
correa del arnés debe estar seca antes del uso .
4. Repita los pasos 2 y 3 según sea necesario. La hebilla debe
trabarse haciendo un “clic”.
5. Vuelva a sujetar la hebilla en la misma ranura que en el Paso 1.
Vuelva a inspeccionar el arnés para determinar si la instalación es
correcta antes de usarlo.
Download from Www.Somanuals.co6m5. All Manuals Search And Download.
24.0 Para sacar la funda del asiento
Funda del asiento: limpiar con una esponja
húmeda usando un jabón suave y agua fresca.
De ser necesarioꢀ se puede sacar la funda
para limpiarla.
1. Saque las correas del arnés y para la
entrepierna (vea la Sección 13.0ꢀ Cómo sacar
el arnés. pág. 42-46).
2. Saque los nudos de plástico del asiento
como se indica en ꢀy .
Cinta de
nudo y gancho
3. Lave la funda a máquina en agua fría en
el ciclo delicado y séquela al aire. NO USE
BLANQUEADOR.
4. Para volver a poner la funda del asientoꢀ
invierta las instrucciones anteriores.
Cinta de
nudo y gancho
Download from Www.Somanuals.co6m6. All Manuals Search And Download.
25.0 Cómo guardar el manual del dueño
El Manual del dueño puede guardarse abajo
del asiento en el interior de la ranura en el
apoyapie como se indica.
Download from Www.Somanuals.co6m7. All Manuals Search And Download.
26.0 Piezas de repuesto y garantía
Para comprar piezas o accesorios o para obtener información sobre la garantía en los
Estados Unidos, por favor comuníquese con nosotros en:
www.gracobaby.com
o
1-800-345-4109
Download from Www.Somanuals.co6m8. All Manuals Search And Download.
|