DVD Player+
Video Cassette Recorder
OWNER’S MANUAL
MODEL : GBV441
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The open-
ings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been
adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢀ Still Picture and Frame-by-Frame Playback . 28
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Marker Search . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Changing Video Mode . . . . . . . . . . . . . . . . . 29
Special DVD Features . . . . . . . . . . . . . . . . . . . . 29
ꢀ Checking the contents of DVD Video discs: . . .
Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Changing the Audio Language . . . . . . . . . . . 29
ꢀ Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Audio CD and MP3/WMA Disc Operation . . . . 30-31
Playing Audio CDs and MP3/WMA Discs . . . . . . 30
MP3/WMA Recording Notes. . . . . . . . . . . . . . . . 30
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ꢀ Selecting other Tracks . . . . . . . . . . . . . . . . . 31
ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 31
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 31
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 31
ꢀ Changing the Audio Channel . . . . . . . . . . . . 31
JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 32
Viewing JPEG Files on a Disc . . . . . . . . . . . . . . 32
ꢀ Selecting other JPEG Files . . . . . . . . . . . . . 32
ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 32
ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 32
ꢀ Notes on JPEG Files . . . . . . . . . . . . . . . . . . 32
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 33
Programmed Playback with Audio CDs and
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting the Viewing Source. . . . . . . . . . . . . . . . 6
Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . 7
Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connections Panel . . . . . . . . . . . . . . . . . . . . . . . . 10
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
Connecting Antenna/Cable TV to DVD+VCR . . . 11
Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12
Optional, Preferred TV Connections . . . . . . . 12-13
VCR Operation Setup . . . . . . . . . . . . . . . . . . . . 14-16
On-Screen Display (OSD) . . . . . . . . . . . . . . . . . 14
On-Screen Menus Setup . . . . . . . . . . . . . . . . . . 14
VCR Setup Menu Options . . . . . . . . . . . . . . . . . 15
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 16
DVD Operation Setup . . . . . . . . . . . . . . . . . . . . 17-20
General Explanation. . . . . . . . . . . . . . . . . . . . . . 17
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 18-20
ꢀ General Operation . . . . . . . . . . . . . . . . . . . . 18
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Progressive Scan. . . . . . . . . . . . . . . . . . . . . 18
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 20
MP3/WMA Discs . . . . . . . . . . . . . . . . . . . . . . . . 33
ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 33
ꢀ Erasing a Track from the Program List . . . . . 33
ꢀ Erasing the Complete Program List . . . . . . . 33
Operation
VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . 21-26
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 21
Special Effect Playbacks . . . . . . . . . . . . . . . . . . 21
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Still Picture and Frame-by-Frame Playback . 21
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ CM SKIP (Commercial Skip) . . . . . . . . . . . . 21
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 22
Timer Recording . . . . . . . . . . . . . . . . . . . . . . 22-23
Instant Timer Recording . . . . . . . . . . . . . . . . . . . 24
Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 24
Copying from DVD to VCR. . . . . . . . . . . . . . . . . 24
VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 25
Tape Counter Memory Feature. . . . . . . . . . . . . . 26
Additional Information . . . . . . . . . . . . . . . . . . . . 26
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 27-29
Playing DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . 27
General Features . . . . . . . . . . . . . . . . . . . . . 27-29
ꢀ Selecting other TITLEs. . . . . . . . . . . . . . . . . 27
ꢀ Selecting other CHAPTERs . . . . . . . . . . . . . 27
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 27
Reference
Controlling Your TV with the Supplied Remote . . 34
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35-36
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 37
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features on this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-Related Terms
Playable Discs
Title (DVD only)
The main film content or accompanying feature content
or music album.
DVD
(8 cm/12 cm disc)
Each title is assigned a title reference number enabling
you to locate it easily.
Audio CD
(8 cm/12 cm disc)
Chapter (DVD only)
In addition, this unit can play , Kodak Picture CDs
DVD+R/RW, DVD-R/RW and CD-Rs or CD-RWs that
contain audio titles, MP3, JPEG or WMA files.
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, the DVD may not be divided into chapters.
otes
ꢀ Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs cannot
be played on the unit.
ꢀ The unit cannot play discs that contain data other
than MP3 and CD-DA data.
Track (Audio CD only)
Sections of a musical piece on an audio CD. Each track
is assigned a track number, enabling you to locate the
track you want.
Remote Control Battery Installation
ꢀ Do not attach any seal or label to either side
(the labeled side or the recorded side) of a disc.
ꢀ Do not use irregularly shaped CDs
(e.g., heart-shaped or octagonal). The unit may
malfunction.
Detach the battery cover on the rear of the
remote control, and insert two AAA batter-
ies with
and
aligned correctly.
otes on DVDs
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Some playback operations of DVDs may be intentionally
fixed by software manufacturers. As this unit plays
DVDs according to disc content designed by the software
manufacturer, some playback features of the unit may
not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs.
Some DVDs made for business purposes may not be
played on the unit.
Remote Control Operating Range
Point the remote control at the remote sensor and press
the buttons.
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor
Regional code of this DVD+VCR and
DVDs
This DVD+VCR is designed and manufac-
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
1
tured for playback of Region 1 encoded
IMPORTANT NOTE:
DVD software. The region code on the labels of some
DVD discs indicate which type of DVD+VCR can play
those discs. This unit can play only DVD discs labeled 1
or ALL. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF IN A SAFE MANNER
IN COMPLIANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR
LOCAL COUNTY SOLID WASTE AUTHORITY.
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
ote on DTS-encoded CDs
When playing DTS-encoded CDs, excessive noise may
be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the
volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel Digital SurroundTM decoder system must be
connected to the digital output of the unit.
DTS and DTS Digital Out are trademarks of Digital Theater
Systems, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Precautions
Cleaning discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
YES
NO
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
About Symbols
Cleaning the unit
About the
symbol display
To clean the cabinet
“
” may appear on the TV screen during operation.
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbols are
applicable only to those discs represented by the symbol.
To obtain a clear picture
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
DVD DVD
CD
Audio CDs.
MP3 MP3 Discs.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
WMA Discs.
JPEG Files.
WMA
JPEG
For details, please contact your nearest dealer.
Selecting the Viewing Source
Notes on Discs
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
Handling discs
• If you want to view DVD deck output source:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator in the display window lights and output
source of DVD deck is viewed on the TV screen.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
• If you want to view VCR deck output source:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator in the display window lights and output
source of VCR deck is viewed on the TV screen.
otes
Storing discs
ꢀ If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode
automatically.
ꢀ If you insert a cassette tape without an erasure
prevention tab while the DVD+VCR is in the DVD
mode, the DVD+VCR will switch to VCR mode auto-
matically.
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
LINE 2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/Monitor, another VCR).
DVD/VCR (output select)
Select the DVD or VCR output source to view on the TV screen.
REC/ITR (z)
To record normally or to activate Instant Timer Recording.
CH (v/V)
To scan up or down through memorized channels.
EJECT(Z)
Ejects the tape in the VCR deck.
Cassette Compartment
(VCR deck)
Insert a video cassette here.
Disc Tray (DVD deck)
Insert a disc here.
Remote Sensor
Point the DVD+VCR remote control here.
Display window
Shows the current status of the DVD+VCR.
OPEN/CLOSE (Z)
Opens or closes the disc tray.
X/C (PAUSE/STEP)
Pause playback of a tape or a disc in the DVD or VCR deck
temporarily/press repeatedly for frame-by-frame playback.
x (STOP)
Stops playback of a disc or tape.
R/T(Forward SKIP/SCAN)
DVD: Go to NEXT chapter/track. Press and hold for a fast forward search.
VCR: Advances the tape while in STOP mode or for fast forward picture search.
B (PLAY)
To play back a recorded tape or disc.
S/Q(Reverse SKIP/SCAN )
DVD: Go to beginning of current chapter/track or to previous chapter/track.
Press and hold for a fast reverse search.
VCR: Rewinds the tape while in STOP mode or for fast reverse picture search.
COPY
Press to copy a DVD in the DVD deck to a
VHS tape in the VCR deck.
POWER
Switches the DVD+VCR ON and OFF.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
The DVD deck is selected.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
Indicates when the Progressive scan is active.
Indicates repeat mode.
Indicates when the DVD+VCR is locked.
DVD+VCR is in timer recording or a timer
recording is programmed.(VCR part only)
A cassette is in the VCR deck.
The VCR deck is selected.
[P]
DVD
VCR
REC
PM
TV
Lights when TV mode is active (See page 22.)
Indicates PM time. (AM is not displayed.)
DVD+VCR is Recording.
(VCR part only)
Indicates total playing time, elapsed time, remaining time or
current deck status (Playback, Pause, etc).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
Turns DVD+VCR ON and OFF.
EJECT, OPEN/CLOSE
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
DVD
Select the DVD+VCR function mode to
DVD.
TV Control Buttons
- POWER: Switches TV ON and OFF.
- INPUT: Selects the TV’s source.
- CH +/–: Selects TV’s channel.
- VOL +/–: Adjusts TV’s volume.
- MUTE: Turns on or off TV sound.
VCR
Select the DVD+VCR function mode to
VCR.
INPUT
Selects the VCR deck’s source
(Tuner, LINE 1, or LINE 2).
BACKWARD / FORWARD (m/M)
-
DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape
during the STOP mode, for fast
reverse/forward picture search.
0-9 numerical buttons
Selects numbered options in a menu.
Selects TV’s channel.
SKIP (. / >)
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
DISPLAY, CLK/CNT
Accesses On-Screen Display.
Switches between the clock, tape count-
er and tape remaining modes on the dis-
play.
PAUSE/STEP (X)
Pause playback or recording temporari-
ly, press again to exit pause mode.
press repeatedly for frame-by-frame
playback.
SETUP, MENU
Accesses or removes DVD Setup menu
and VCR menu.
N (PLAY)
Starts playback.
STOP (x)
Stops playback or recording.
b B v V (left/right/up/down)
Selects menu options.
REC/ITR (z)
Starts recording. Press repeatedly to set
the recording time.
CH/TRK(v+/V-) : Selects VCR channels.
Adjusts manually the tape’s picture
onscreen.
LOCK
Locks/unlocks front panel buttons.
ENTER
Confirms menu selections.
TITLE
Displays the disc’s Title menu, if
available.
DISC MENU
Accesses menu on a DVD disc.
RETURN (O)
PROGRAM
Accesses or removes Program menu.
Removes the menu.
MARKER
Marks any point during playback.
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
SEARCH
Displays Marker Search menu.
SUBTITLE
Selects a subtitle language.
CLEAR
Removes a mark on the Marker Search
menu.
ANGLE
Selects a DVD camera angle,
if available.
REPEAT
Repeat chapter, track, title or all.
ZOOM
Enlarges DVD video image.
A-B/SPEED
- Repeats sequence between two points
(A and B).
- Selects recording speed.
RANDOM/CM SKIP
- Plays tracks in random order.
- Fast forwards picture search through
30 seconds of recording.
LOCK
The Lock feature disables the front panel buttons to prevent children from tam-
pering with the DVD+VCR. Simply press LOCK on the remote control to toggle
this feature on and off.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections Panel
VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system,
TV/Monitor, Another VCR).
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV, amplifier, receiver, or stereo system.
AC Power Cord
Plug into the power source
(AC 120V, 60 Hz).
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)
Connect to digital (coaxial) audio equipment.
ANT.IN (ANTENNA INPUT)
Connect the VHF/UHF/CATV antenna to this terminal.
RF. OUT (DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Without Cable Box
ips
If your cable wire is connected to your TV without a converter
or descrambler box, unscrew the wire from your TV and attach
it to the ANT.IN jack on the DVD+VCR. Use the supplied round
coaxial cable to connect between the DVD+VCR’s RF.OUT
jack and the 75 ohm antenna input jack on the TV. With this
connection, you can receive all midband, super band, and
hyperband channels.
ꢀ
ꢀ
ꢀ
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
DVD+VCR. Use connections described on pages 11-13.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the best
connections.
For better sound reproduction, connect the DVD+VCR’s
DVD/VCR AUDIO OUT jack to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment. See
Optional, Preferred TV Connections on pages 12-13.
With Cable Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and DVD+VCR operation.
Caution
To view or record CATV channel
ꢀ
ꢀ
Make sure the DVD+VCR is connected directly to the TV.
Tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT
jack to the phono in jack (record deck) of your audio
system.
1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2 Set the DVD+VCR channel selector to the output channel of
the Cable Converter box by using the CH/TRK (v/V) or
number (0-9) of your DVD+VCR. (Example: CH3)
3 Select the channel to view at the Cable Converter Box.
ꢀ
Do not connect your DVD+VCR via your VCR. The DVD
image could be distorted by the copy protection system.
otes
ꢀ With this connection, you CANNOT record one program
while viewing another.
ꢀ If you are using a cable box to tune channels, it is not nec-
essary to do Auto Channel Programming as indicated on
page 15.
Connecting Antenna/Cable TV to
DVD+VCR
Disconnect the antenna leads from the rear of the
1
TV.
Cable TV
Wall Jack
Identify the type of cable from your antenna. If it is
2 a round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to
the jack marked ANT.IN on your DVD+VCR.
Back Panel of
Typical Cable Box
ip
If your antenna lead wire is a flat type antenna cable,
connect it to an Antenna Adapter (300-ohm to 75-ohm)
(not supplied) and slip the Adapter onto the ANT.IN
jack. The Adapter does not screw on to the DVD+VCR,
it just slips over the jack.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
Rear of DVD+VCR
300/75 ohm
Adaptor
(Not supplied)
OR
OR
Rear of DVD+VCR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Basic TV Connections
Optional, Preferred TV Connections
ꢀ
Make one of the following connections, depending on
the capabilities of the equipment to be connected.
ote
You can ONLY watch and listen to DVD playback
through the connections shown below.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-Video cable (S).
1
ote
If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4).
Connect the Left and Right AUDIO OUT jacks of
2 the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables (A2).
How to set the DVD+VCR’s RF output channel
1.Set the TV to the VCR channel (3 or 4) depending
upon the selected channel.
Component Video (Color Stream®) / Progressive
Scan (ColorStream® pro) connection
2.When the DVD+VCR is turned off, press and hold CH
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
video resolution possible.
(V/v) on the front panel for more than five seconds.
It will turn itself on and “RF03” or “RF04” appears in the dis-
play window.
3.Press CH (V/v) on the front panel or CH/TRK (v/V)
on the remote control to change the RF output chan-
nel (CH 03 or CH 04).
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+VCR.
4.Turn off the DVD+VCR.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD+VCR to the corre-
sponding in jacks on the TV using an optional Y Pb
Pr cable (C).
1
Audio/Video connection
Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).
1
Connect the Left and Right AUDIO OUT jacks of
2 the DVD+VCR to the audio left/right in jacks on the
TV (A2) using the supplied audio cables.
Connect the Left and Right DVD/VCR AUDIO OUT
2 jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.
otes
ꢀ Set the Progressive Scan to “On” on the setup menu
for progressive scan signal, see page 18.
ꢀ When you use Component Video signal, set the
Progressive Scan to “Off” on the setup menu.
ꢀ Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
ote
If you use this connection, set the TV’s source selector
to VIDEO.
Rear of TV
Rear of TV
S-VIDEO
INPUT
ANTENNA
VIDEO
COMPONENT VIDEO INPUT
AUDIO INPUT
AUDIO INPUT
INPUT
INPUT
Y
Pr
Pb
R
L
R
L
C
A2
S
R
A1
V
Rear of DVD+VCR
Rear of DVD+VCR
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Rear of DVD+VCR
Optional, Preferred TV Connections
ote
You can ONLY listen to DVD playback using COAXIAL
(X) and AUDIO OUT (A2) connections. The tuner and
VCR will still be heard through the RF.OUT (R) or
DVD/VCR AUDIO OUT (A1) jack. (See page 12.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VCR
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (for A1 or A2 connection)
supplied.
A1
A2
X
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
1
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 or LINE 2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables.
You will need to activate the DVD+VCR’s digital
output. (See “Digital Audio Output” on page 19).
2
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
otes
ꢀ
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
ꢀ Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
ꢀ To see the audio format of the current DVD in the on-
screen display, press AUDIO.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup
EASY INFORMATION
On-Screen Display (OSD)
Some of these functions will be displayed every time
the DVD+VCR is operated.
If the Extended Data Service (XDS) signals are provid-
ed along with normal TV signal in your area or during
playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title, and
program details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details
will appear on the TV screen.
❶
❷
❸
❹
❺
PLAY
SP
HI-FI
CH 4
STEREO
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
APR 30, FRI
2:15 PM
❻
❼
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the current function.
❸ HI-FI DISPLAY
Indicates when this unit is playing back tape recorded with
Hi-Fi.
❹ CHANNEL DISPLAY
CH 4
WABC STEREO
PROGRAM DETAILS
“Home video”
SP
Indicates the selected channel (or LINE1, LINE2).
❺ STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
“Home video”
APR 30 , FRI
2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
On-Screen Menus Setup
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed conve-
niently with the on-screen menus, that lead you through
each step. The following pages describe the on-screen
menu selections available.
Each press of the ENTER changes the TV
on-screen displays in the following sequence.
STOP
SP
CH
STEREO
4
Menu Selection
Your DVD+VCR allows remote control adjustment of
several features.
APR 30 , FRI
2:15 PM
2:15 PM
Press MENU and the MAIN menu will appear.
0:35:40
1
REM 1:58
Select the desired menu with v/V button and
2 then press ENTER.
ote
Menus remain on-screen for 3 minutes.
otes
ꢀ Function displays remain on the TV screen for 5 seconds.
MAIN MENU
ꢀ The clock (or tape counter, tape remaining) mode will be dis-
played until you press ENTER.
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)
ꢀ The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
Press MENU when finished.
3
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup (Continued)
VCR Setup Menu Options
Channel Selection
Press MENU and the MAIN menu will appear.
This DVD+VCR is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels 14-69
and CATV channels 1-125.
1
Use v/V to select the SETUP menu, then press
2 ENTER.
Preparation:
The SETUP menu will appear.
ꢀ Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
Press MENU and the MAIN menu will appear.
1
Use v/V to choose a desired option on the
3 SETUP menu. Then use b/B to make adjust-
ments.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or
Use v/V to select the TUNING menu, then press
2 ENTER.
The TUNING menu will appear.
off.
ꢀ Use b/B to switch the FUNCTION OSD ON or OFF.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the
high quality VHS Hi-Fi system and standard NORMAL mono
system. The same audio is generally recorded on both
systems. The VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+VCR that does not have VHS Hi-Fi.
ꢀ AUDIO MODE can be switched between HI-FI and
NORMAL using b/B.
Use v/V to choose the SOURCE SELECT option,
3 then use b/B to select TUNER.
Press b/B repeatedly to switch between TUNER, LINE1,
and LINE2.
Press v/V to choose the AUTO CHANNEL SET
4 option, then press b/B to set the channel.
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and place
them in the tuner’s memory.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO posi-
tion. The DVD+VCR will then record a STEREO program when
available, and record a mono program IF the program is NOT
IN STEREO.
• After the AUTO CHANNEL SET is complete, the TUN-
ING menu will hide and return to the TV screen automat-
ically.
Make sure the TUNING BAND is set appropriate-
5 ly (TV or CATV).
• TV : If you are using a standard antenna to receive
channels.
CATV : If you are using basic cable to receive channels.
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
ꢀ BROADCAST TYPE can be switched between STEREO,
SAP, and MONO using b/B.
• Change the setting of TUNING BAND to check the TV
channels.
Use CH/TRK (v/V) on the remote control or CH
6 (V/v) on the front panel to cycle the DVD+VCR
through the channels in memory.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
ꢀ AUDIO OUTPUT can be switched between STEREO, LEFT,
and RIGHT using b/B.
TO ADD OR ERASE CHANNELS
This feature allows you to add or erase channels from
memory manually.
1
2
3
Use v/V to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to add
or erase.
Use ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
Press MENU when finished.
4
Press MENU to return to the TV screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Setup (Continued)
Setting the Clock
ote
There are cases where the TV station does not send or sends
wrong date and/or time information and the DVD+VCR sets the
incorrect time.
The DVD+VCR gives you two ways to set the time and
date: the Auto Clock Feature or manually. The Auto
Clock feature enables the DVD+VCR to set up the clock
while the DVD+VCR is turned off.
If this happens we recommend that you set the clock manually.
Manual Clock Set
Things to know before starting
The clock uses the 12-hour system. (Be sure to set AM
ꢀ
and PM correctly.) (AM does not appear.)
Press MENU and the MAIN menu will appear.
ꢀ
The initial Clock Setting is JANUARY 1, 2004, 12:00 AM.
1
Use v/V to choose the CLOCK menu.
Auto Clock Set
2 Press ENTER and the CLOCK menu will appear.
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the DVD+VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the clock
using the Coordinated Universal Time.
The Auto Clock feature enables the DVD+VCR to set up
the clock while the DVD+VCR is turned off.
Press MENU and the MAIN menu will appear.
1
Use b/B to choose the month.
3
Use v/V to choose the CLOCK menu.
2 Press ENTER and the CLOCK menu will appear.
Use V to choose the DAY option.
4 Use b/B to choose the date.
The day of the week will display automatically.
Use V to choose the YEAR option.
5 Use b/B to choose the year.
Use V to choose the TIME option.
6 Use b/B to choose the time.
continuously.
Press and hold b/B to advance clock
Use V to choose the AUTO CLOCK SET option.
3 Use b/B to choose ON.
Use E to choose the DAYLIGHT SAVINGS item.
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the DVD+VCR looks for a channel
carrying XDS (Extended Data Services) information. XDS
updates the clock using the Coordinated Universal Time.
7
Use F or G to choose AUTO, ON or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
Use E to choose the DAYLIGHT SAVINGS
4 option.
Use F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
Use E to choose the TIME ZONE option.
5 Use F or G to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
Press MENU when finished.
8
PACIFIC, ALASKA or HAWAII).
If “AUTO” is selected as the time zone, the VCR sets the
clock using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal.
ote
If setting the clock manually, “AUTO CLOCK SET” must
set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the DVD+VCR is turned off.
Press MENU when finished.
6
7
Turn off the DVD+VCR and the auto clock set
feature sets the time.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup
General Explanation
Temporary Feedback Field Icons
TITLE
Repeat Title (DVD)
This manual gives the basic instructions for operating
the DVD+VCR. Some DVDs require specific operation
or allow only limited operation during playback. When
CHAPT
Repeat Chapter (DVD)
A
B
Repeat A-B
this occurs, the symbol
appears on the TV screen,
OFF
Repeat Off
indicating that the operation is not permitted by the
DVD+VCR or is not available on the disc.
Resume play from this point
Action prohibited or not available
On-Screen Display
The general playback status can be displayed on the
TV screen. Some options can be changed on the menu.
otes
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
On-screen display operation
Press DISPLAY during playback.
1
Use v/V to select an option.
2 The selected option will be highlighted.
Use b/B to change the setting of an option.
3 The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
DVD
Options
Function (Use v
/
V to select desired option.)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B, or
Numbers , ENTER
1/3
1/12
-:--:--
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B, or
Numbers , ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numbers , ENTER
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
ENG
D
5.1CH
b/B, AUDIO
Subtitle language
Shows the current subtitles language, and
changes the setting.
OFF
1/1
ABC
b/B, SUBTITLE
b/B, ANGLE
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
Sound
Shows the current sound mode, and
changes the setting.
b/B
NORM.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Initial Settings
Picture
TV Aspect DVD
You can set your personal preferences on the
DVD+VCR.
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays pictures with masking bars above and
below the picture.
General Operation
Press SETUP.
The Setup menu appears.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
1
Original
English
Disc Audio
16:9 Wide: Select when a 16:9 wide TV is connected.
Disc Subtitle
Disc Menu
French
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Rating
German
Spanish
Italian
Disc Subtitle
Disc Menu
Country Code
TV Aspect
Rating
Menu Language
Progressive Scan
Digital Audio Output
Chinese
Polish
Country Code
TV Aspect
Hungarian
Other — — — —
Menu Language
Progressive Scan
Digital Audio Output
Others
Use v/V to select the desired option.
2 The screen will show the current setting for the
selected option, as well as alternate setting(s).
Others
While the desired option is selected, press B,
Progressive Scan DVD
3 then v/V to select the desired setting.
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
DVD+VCR to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Press ENTER to confirm your selection.
4 Some options require additional steps.
Press SETUP, RETURN, or N (PLAY) to exit the
5 setup menu.
Language
Disc Language DVD
Select a language for the disc’s Menu, Audio, and
Subtitle features.
Original : The original language set for the disc is selected.
Other : To select another language, use number buttons to
enter the corresponding 4-digit number according to the
language code list on page 37. If you enter the wrong
language code, press CLEAR.
Off
Disc Audio
Disc Subtitle
Disc Menu
On
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
ote
Disc Language selection may not work for some DVDs.
Original
English
Others
Disc Audio
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Country Code
TV Aspect
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
Menu Language
Progressive Scan
Digital Audio Output
Chinese
Polish
Hungarian
Other — — — —
Others
1) Remove any disc from the unit and close the disc
tray. See that “dISC” is displayed on the display
window.
Menu Language
Select a language for the Setup menu. This is the menu
you see when you press SETUP.
2) Press STOP (9) and hold it for more then five
seconds before releasing it. The video output will be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
monitor.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Sound
Others
The DRC, Vocal and Auto Play settings can be
changed.
Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the DVD+VCR’s Digital Audio Output according to
the type of audio system you use.
ꢀ
Use v/V to select the desired option and then press
ENTER repeatedly to select On or Off.
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if
you have connected the DVD+VCR’s DIGITAL AUDIO
OUT jack to a Dolby Digital decoder (or an amplifier or
other equipment with a Dolby Digital decoder).
Stream/PCM: Select Stream/PCM if you have
connected the DVD+VCR’s DIGITAL AUDIO OUT jack
to an amplifier or other equipment with a DTS decoder,
Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a 2 channel digital
stereo amplifier. The DVD+VCR outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded with a Dolby Digital, MPEG1, or MPEG2
recording system.
DRC
On
On
Off
Disc Audio
Vocal
Disc Subtitle
Disc Menu
Auto Play
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Sample Freq.
48 KHz
Menu Language
Progressive Scan
Digital Audio Output
96KHz
Vocal
Others
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Sample Frequency
Auto Play DVD
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
You can set up the DVD Player so a DVD disc automat-
ically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for a title that has the longest playback time and
then play back the title automatically.
On: Auto Play function works.
Off: Auto Play function does not work.
ote
The Auto Play function may not work for some DVDs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Setup (Continued)
Parental Control
DVD
Country Code
Enter the code of a country whose standards were used
to rate the DVD video disc, referring to the list (See
“Country Code List”, page 38.).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
U
S
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
8
Disc Audio
Others
Disc Subtitle
Disc Menu
7
6
Rating
5
Select the Country Code option using the v/V
buttons on the setup menu.
Country Code
TV Aspect
4
1
3
Menu Language
Progressive Scan
Digital Audio Output
2
While Country Code is selected, press B.
1
2
3
4
Unlock
Change
Follow step 3 of “Rating” on left.
Others
Select the first character using the v/V buttons.
Press 2 to shift to second character and select
Select Rating on the Setup menu using v/V
buttons.
1
2
While Rating is selected, press B.
5 the second character using v/V buttons.
Press ENTER to confirm your Country Code
6 selection, then press SETUP to exit the menu.
ote
When you have not entered a password yet.
3 Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit
Confirmation of the 4-digit password is necessary when
the password is changed (see Changing the 4-digit
password below ).
password again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numerical
buttons to confirm the personal 4-digit security
password, then press ENTER.
Changing the 4-digit password
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old password, then press ENTER.
3 Select Change using v/V buttons then press
ENTER.
4 Enter the new 4-digit password, then press ENTER.
5 Enter exactly the same password a second time and
verify by pressing ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
Select a rating from 1 to 8 using v/V buttons.
4 One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
6 Press SETUP to exit the menu.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the
DVD+VCR, all disc scenes with the same rating or
lower will be played. Higher rated scenes will not be
played unless an alternative scene is available on
the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit pass-
word or change the rating level in order to play the
disc.
If you forget your 4-digit password
If you forget your password, to clear the current pass-
word follow the procedure below.
1 Press SETUP to display the setup menu.
2 Enter the 6-digit number 210499 and then press
ENTER.
The 4-digit password is cleared.
3 Enter a new password as shown above to the left
(Rating).
Press ENTER to confirm your rating selection,
5 then press SETUP to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Search
Normal Playback
Preparation:
This function lets you quickly and visually search for a
desired tape section in either direction: forward or
reverse.
ꢀ Turn on the TV.
ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
1 Press BACKWARD (m) or FORWARD (M)
during playback.
The DVD+VCR will be activated in the SEARCH
mode.
ꢀ If the DVD+VCR is left in the SEARCH mode for more
than 3 minutes, the DVD+VCR will automatically enter the
PLAY mode, to protect the tape and video heads.
2 To return to playback, press N (PLAY).
ꢀ Set the Output Source to VCR as shown in “Selecting the
Viewing Source” on page 6.
Insert a prerecorded video cassette.
indicator will light and the DVD+VCR will
1
The
power-up automatically.
Still Picture and Frame-by-Frame Playback
1 Press PAUSE/STEP (X) during playback.
Still picture will appear on the TV screen.
ꢀ If a still picture vibrates vertically, stabilize it using
v/V on the remote control.
ꢀ Make sure that the
indicator in the display
window is not lighted. If it is, press POWER once.
ꢀ If a tape without a safety tab is inserted, the unit will
start playback automatically.
Press N (PLAY) once.
ꢀ If the DVD+VCR is left in the STILL mode for more than 5
minutes, the DVD+VCR will automatically enter the STOP
mode to protect the tape and video heads.
2 PLAY appears on the TV screen .
ꢀ It is not necessary to select the tape speed for
playback. It will be automatically selected by the
DVD+VCR.
2 Press PAUSE/STEP (X) repeatedly to advance the
video picture one frame at a time while viewing a still
picture.
ꢀ In playback, the TV/VCR selector switches to VCR
mode automatically.
3 To return to playback, press N (PLAY).
Press STOP (x) to stop playback.
3 STOP appears on the TV screen.
ꢀ If the tape reaches the end before STOP (x) is
pressed, the DVD+VCR will automatically stop, rewind
and eject the tape, and it will turn itself off.
Slow Motion
1 While in still mode, press FORWARD (M).
The tape will be played back at a speed 1/19 times
slower than the normal speed.
ꢀ During slow playback, use v/V on the Remote Control to
minimize noise bands.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to
remove snow or streaks.
The AUTO TRACKING function works in the following
cases:
ꢀ If slow motion mode continues for more than 3 minutes,
the DVD+VCR will automatically change to playback
mode.
2 To return to playback, press N (PLAY).
ꢀ A tape is played back for the first time.
ꢀ Tape speed (SP, LP, SLP) changes.
ꢀ Streaks or snow appear because of scratches on the tape.
CM SKIP (Commercial Skip)
This is useful for skipping commercials or short program
segments.
1 Press CM SKIP during playback.
The tape will fast forward picture search through 30
seconds of recording.
Manual Tracking
If noise appears on the screen during playback, press
either CH/TRK v/V on the remote control or CH (v/V)
on the front panel until the noise on the screen is
reduced.
ꢀ In case of vertical jitter, adjust tracking controls very
carefully.
ꢀ Skipping time can be extended by pressing CM SKIP
repeatedly.
ꢀ Subsequent presses result in advancing the fast forward
picture search time by 30-second increments (maximum 3
minutes).
ꢀ Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
2 When the search is complete, the DVD+VCR will go
into playback mode automatically.
Special Effect Playbacks
Special effects playback notes
ꢀ Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
ꢀ The audio is automatically muted during special effect modes,
so there is no sound during search.
ꢀ During high-speed picture search mode, a short period is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this period.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Normal Recording
Timer Recording
Preparation:
This DVD+VCR can be programmed to record up to 8
programs within a period of 1 year. For unattended
recording, the timer needs to know the channels to be
recorded and the starting and ending times.
ꢀ Turn on the power of both the DVD+VCR and TV.
ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
Things to know before starting
If you try to set the program timer before setting the clock,
ꢀ
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
Insert a video cassette with the safety tab intact.
1
Select the desired channel with CH/TRK (v/V).
2
ꢀ
Make sure a tape is in the DVD+VCR and the safety tab is
in place or the tape will be automatically ejected.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2 with INPUT.
Preparation:
ꢀ Turn on the power of both the DVD+VCR and the TV.
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
ꢀ Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
Set the desired recording speed (SP or SLP)
3 with SPEED.
Set the MTS mode as desired (See page 15, 25).
ꢀ
ꢀ This DVD+VCR is not designed to record in LP mode.
Press MENU and the MAIN menu will appear.
4
1
2
Press REC/ITR (z) once.
Use v/V to choose the PROGRAM menu.
5 Recording will start. (The REC indicator will light in
the display window.)
ꢀ REC indicator appears only when the Output Source is
set to VCR.
Press ENTER to go to the PROGRAM menu.
3 The PROGRAM menu will appear.
ꢀ If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
ꢀ If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
Press STOP (x) to stop recording.
6 If the tape reaches the end before STOP (x) is pressed,
the DVD+VCR will automatically stop, rewind, eject the
tape and turn itself off.
To pause recording
1 Press PAUSE/STEP (X) to pause the tape during
recording.
The REC indicator will flash in the display window.
Use b/B to choose the PROGRAM No. (1-8).
4
2 When you want to continue recording, press
PAUSE/STEP (X) or press REC/ITR (z).
Use V to choose the MONTH option.
5 Use b/B to choose the desired month.
ꢀ After 5 minutes in pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
Use V to choose the DAY option.
6 Use b/B to choose the desired day.
7
To record one TV program while
watching another
1 Use TV/VCR to select the TV mode during recording.
The TV indicator appears.
2 Using the TV, select the channel to be viewed.
Use V to choose the START option.
Use b/B to choose the desired start time.
Use V to choose the STOP option.
8 Use b/B to choose the desired stop time.
Use V to choose the CHANNEL option.
9 Use b/B to choose the desired channel
(Channel, LINE1 or LINE2).
ips
Always use PAUSE/STEP (X) for best results when making
changes during recording.
For example: To change channels during recording, first press
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD+VCR (page 11),
using a cable box converter, you must set the channel in
this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
with the DVD+VCR.
PAUSE/STEP (X) to put the unit in Pause mode. Then select
the desired channel on the DVD+VCR, and press
PAUSE/STEP (X) again to resume recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Use V to choose the SPEED option.
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the DVD+VCR
10
Use b/B to choose the desired recording
speed (AUTO, SP or SLP).
ꢀ AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to
complete recording the program. There will be some
picture and sound distortion at the point of the speed
change.
is turned on.
1 Press MENU and the MAIN menu will appear.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
Use V to choose the REPEAT option.
11
Use b/B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on a
certain day of every week.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press MENU to return to the TV screen.
Program Priority
If the starting and ending
times of two or more timer
recordings overlap on the
same day, priority is given to
the earliest recording. For
ip
If the input data is wrong, use v to select the data
and correct it using b/B.
example, in the diagram at
left Program number 2 will
Press MENU, the program will be memorized
by the DVD+VCR.
not be recorded until Program number 1 is finished. The
first part of Program number 2 will not be recorded.
Likewise, Program number 3 will not be recorded until
Program number 2 is finished, and so on.
12
ꢀ
indicator lights in the display window.
ꢀ If the program preset time has past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program
it with the correct time.
ꢀ If you had entered a past date, timer recording will
be performed on that date of the next year.
ꢀ Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a Cable
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your DVD+VCR.
ip
If you are finished programming and you want to set the
DVD+VCR to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. The DVD+VCR is now set to record the preset
programs.
otes
If the power fails or the DVD+VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in
memory for approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when power is
restored. Reset the clock according to instructions.
After setting up a timer recording, recording will start if no other
timer recordings are scheduled to occur at the same time (see
“Program Priority” at right).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Instant Timer Recording
Dubbing and Editing
If you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD+VCR, the rear (or Front)
panel mounted Audio and Video (A/V) input jacks
make the connections quick and easy. These direct
A/V jacks will also provide better picture results than
using the RF jack on the rear panel.
Instant Timer Recording allows you to make a recording
easily of a preset length without using the program
timer.
Preparation:
ꢀ Turn on the power of both the DVD+VCR and the TV.
ꢀ Be sure the TV is tuned to the DVD+VCR output channel (3
or 4).
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
Connect the camcorder’s (or another VCR’s) A/V
outputs to your DVD+VCR as illustrated on page
13.
1
Set the input channel “LINE2”. (use INPUT to
2 select LINE2.)
Insert a video cassette with the safety tab intact.
1
ꢀ If you have connected your DVD+VCR to the A/V
input jacks on the rear of DVD+VCR, you should
select the input channel LINE1 by pressing INPUT
twice.
Select the desired channel with v/V or number
2 (0-9).
The channel number appears on the TV screen.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1 or
LINE2.
Play the tape in the camcorder (or another
3 VCR). If you have a TV attached to your
DVD+VCR, you can see the video playing.
Select the desired recording speed (SP or SLP)
3 with SPEED.
When you desire the recording to begin, press
4 DVD+VCR’s REC/ITR (z) once to start.
ote
Before recording, please confirm the recording start position.
The tape speed will appear on the TV screen.
Press REC/ITR (z) twice.
4 The menu as illustrated, will appear on the TV
screen.
ꢀ Recording will start (The
indicator will light).
Copying from DVD to VCR
Press REC/ITR (z) repeatedly to select the
5 recording time length.
This unit allows you to copy the contents of a DVD to a
VHS tape.
At the end of the recording, the DVD+VCR will stop
recording and shut off.
ote
ꢀ During Instant Timer Recording, changing the channel
on the DVD+VCR will not be possible.
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. “Lock” is
displayed in the display window.
ꢀ You can stop the recording by pressing STOP (x).
INSTANT TIMER RECORD MENU
0H30M ..... 9H00M ➝ 0H00M
INSTANT TIMER RECORD
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
CHANNEL
SPEED
2
SP
1
Length Display
(each additional press of
REC/ITR (z) increases recording
time 30 minutes)
START
NOW
Insert VHS Tape
LENGTH
0H30M
2 Insert a blank VHS video tape into the VCR deck.
Press the COPY button on the unit front panel.
3 The DVD will go into Play mode and the VCR will
go into Record mode.
Checking the Recording Time
Press REC/ITR (z) once to check the recording time.
The recalled setting will automatically return to the TV
screen after 6 seconds.
ꢀ If the DVD disc menu appears, you may need to press
N (PLAY) manually to begin copying.
ꢀ “REC” indicator will light.
To extend the Recording Time
The recording time can be extended anytime by press-
Stopping the Copy Process
When the DVD is finished playing, press the VCR button
4
ing REC/ITR (z).
Subsequent presses result in advancing the recording
time by 30-minute increments.
on the remote control and then press STOP (x) to end
copying.
You must stop the Copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
otes
ꢀ If you press PAUSE/STEP (X) during instant timer record-
ing, the DVD+VCR will enter the recording pause mode.
Instant timer recording is cancelled.
ote
When you stop the DVD playback during copying, the VCR
recording mode stops automatically.
ꢀ If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to
normal recording mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
VHS Hi-Fi Stereo System/
MTS Broadcast
MTS (Multi-Channel TV Sound)
This DVD+VCR will decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies,
as long as they operate on assigned cable frequencies
and use the EIA-recommended MTS stereo/bilingual TV
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The informa-
tion below gives a brief description of Hi-Fi audio and
how to record and play a tape in the Hi-Fi audio mode.
sound system.
Playback with Hi-Fi Stereo Audio Sound
Multichannel TV Sound Indicator (MTS)
Shows onscreen as illustrated below when ENTER is
A stereo TV with AUDIO/VIDEO input jacks or a stereo
audio system is required for true stereo playback. To
experience the full and rich stereo sound available with
Hi-Fi recorded tapes, we recommend the connection of
this unit to a home stereo audio system.
pressed.
ꢀ
One or both of the indicators will light, depending on the
MTS broadcast.
TV screen
STEREO
CH 4
STEREO/SAP
Lights up when a stereo broadcast
is being received.
SAP
Lights up when a SAP BILINGUAL
broadcast is being received.
Set the AUDIO MODE option to HI-FI on the
SETUP menu .
1
If only STEREO appears on the TV screen.
The DVD+VCR can record in stereo onto the VHS Hi-Fi audio
tracks when the BROADCAST TYPE option is in the STEREO
position. The DVD+VCR will also record mono audio onto the
mono audio track.
Set the AUDIO OUTPUT option to STEREO
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
2 position.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
(STEREO) POSITION: The left channel sound (L) is
heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard
from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
Insert a video cassette with the safety tab intact.
1
Set the BROADCAST TYPE option to SAP
2 (SETUP menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
Press MENU.
3
Insert a cassette and press N (PLAY).
4 Adjust volume at your stereo system.
Press MENU.
3
Select the desired recording speed (SP or SLP)
4 with SPEED.
Select the desired channel. SAP should appear
5 on the TV screen.
6
Press REC/ITR (z) once
You are now recording the program you see and hear on the
TV.
Press STOP (x) to stop recording.
7
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation (Continued)
Tape Counter Memory Feature
Additional Information
ꢀ
ꢀ
ꢀ
ꢀ
In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the DVD+VCR
automatically starts rewinding the tape at the end of the
tape. The cassette will stop at the beginning of the tape and
be ejected, and the DVD+VCR will turn itself off.
Real-Time Counter
Shows length of tape run in hours, minutes, and
seconds. Press CLK/CNT to select the real-time
counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
After you have finished using the DVD+VCR, rewind, eject,
and remove the cassette. Place the cassette in its protec-
tive sleeve to protect it from dust. It is not necessary to
rewind the cassette before removing it, but if you do, it will
be ready to play or record the next time you use it.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
Be sure the DVD+VCR Channel Selector is on the correct
channel you wish to record. The channel that is being
recorded can always be checked by tuning the television to
the DVD+VCR channel (3 or 4) and pressing the TV/VCR
selector to turn the DVD+VCR’s TV indicator off.
REMAINING TIME
ꢀ
ꢀ
ꢀ
Counter changes to “0:00:00” when the cassette is
ejected.
The real-time counter does not operate if nothing is
recorded on the tape.
The real-time counter will not work unless a tape is
inserted.
Do not attempt to hook up more than one television set to
the DVD+VCR for either recording or playback.
Auto Play System
This DVD+VCR features automatic playback.
Load a cassette (with the safety tab removed).
Counter Memory Function
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
ꢀ
ꢀ
ꢀ
ꢀ
The Output Source is changed to VCR mode automatically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD+VCR stops, then rewinds.
Begin recording or playing a tape.
1
The cassette is ejected after rewinding and the VCR turns
itself off automatically.
Press CLK/CNT repeatedly to display the
2 real-time counter on the TV screen.
At the point that you want locate later, reset the
3 real-time counter to “0:00:00” by pressing
CLEAR.
Continue to play or record.
4
ote
Auto power off does not function during regular DVD play
mode. (DVD+VCR power stays on.)
Press STOP (x) when recording or playback
5 finishes.
Press BACKWARD (m).
S-VHS Quasi Playback (SQPB)
6 The tape automatically stops when the tape counter
returns to about “0:00:00”.
ꢀ
This DVD+VCR can play back S-VHS recorded tapes,
however, it cannot make recordings using S-VHS format
tapes.
Tape Remaining
This function shows the remaining time on the tape
during recording or playback.
ꢀ
SQPB is an abbreviation for S-VHS Quasi Playback.
Press CLK/CNT repeatedly until the REM indicator
appears on the TV screen during recording or playback.
ote
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, or T-210 etc.).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
Playing DVDs
Playback Setup DVD
General Features
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
ꢀ Turn on the TV and select the video input source con-
nected to the DVD+VCR.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD+VCR.
ꢀ Set the Output Source to DVD as shown in “Selecting
the Viewing Source” on page 6.
1 /3
Selecting other TITLEs DVD
When a disc has more than one title, you can select
another title as follows:
Press OPEN/CLOSE (Z) to open the disc tray.
1
ꢀ
Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.
Load your chosen disc in the tray, with the label
2 facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
Selecting other CHAPTERs
1 /12
Press OPEN/CLOSE (Z) to close the tray.
DVD
3 Playback starts automatically. If playback does not
When a title on a disc has more than one chapter or a
disc has more than one track, you can select another
chapter as follows:
start, press N (PLAY).
In some cases, the disc menu might appear
instead.
ꢀ Press SKIP . or > briefly during playback to
return to the beginning of the
current chapter or to select the next chapter.
ꢀ Press SKIP . twice briefly to step back to the pre-
vious chapter.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD
ꢀ To go directly to any chapter during playback,
press DISPLAY. Use v/V to select Chapter icon.
Then, enter the chapter number with the number
buttons (0-9).
Use b/B/v/V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
ote
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
otes
ꢀ If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 20).
Slow Motion DVD
ꢀ DVDs may have a Region Code.
ꢀ Your DVD+VCR will not play discs that have a Region
Code different from your DVD+VCR. The Region
Code for this DVD+VCR is 1 (one).
ꢀ Do not keep a fixed image displayed on the screen
for a long time.
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2 Press BACKWARD (m) or FORWARD (M)
during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD (m) or FORWARD (M) to select
the required speed: t 1/16, t 1/8, t 1/4, t 1/2
(backward), or T 1/16, T 1/8, T 1/4, T 1/2 (for-
ward).
Screen Saver
The screen saver picture appears if you leave the
DVD+VCR in Stop mode for about five minutes.
4 To return to playback, press N (PLAY).
Last Scene Memory
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the player or switch off the
player. if you load a disc that has the scene memo-
rized,m the scene is automatically recalled.
ote
This player does not memorize the scene of a disc if
you switch off the player before commencing to play the
disc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation (Continued)
General Features (Continued)
-:--:--
0:16:57
Time Search DVD
Still Picture and Frame-by-Frame
Playback DVD
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will go into PAUSE mode.
2 With a DVD, you can advance the picture frame by
frame by pressing PAUSE/STEP (X) repeatedly on
the remote control.
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, use
v/V to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3 To return to playback, press N (PLAY).
Search DVD
3 Within 10 seconds, use the numbered buttons to
enter the required start time. Enter hours, minutes
and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
1 Press BACKWARD m or FORWARD M during
playback.
The DVD+VCR will now go into SEARCH mode.
2 Press BACKWARD m or FORWARD M repeated-
ly to select the required speed:
4 Within 10 seconds, press ENTER.
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
mX2, mX4, mX16, mX100 (backward) or
MX2, MX4, MX16, MX100 (forward).
3 To return to playback, press N (PLAY).
3D SUR
NORM.
3D Surround DVD
Random Karaoke DVD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
2 To return to normal playback, press RANDOM until
“NORMAL” appears on the TV screen.
1 Press DISPLAY during playback.
ip
2 Use v/V to select the sound icon.
The sound option will be highlighted.
By pressing SKIP . or > during Random play-
back, the unit selects another title (track) and resumes
Random playback.
3 Use b/B to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM.”.
ote
This function only works with DVD Karaoke discs.
Zoom DVD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
TITLE
OFF
CHAPT
Repeat
DVD Video Discs - Repeat Chapter/Title/Off
DVD
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat CHAPT icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2 Use b/B/v/V buttons to move through the zoomed
picture.
The Repeat TITLE icon appears on the TV screen.
3 Press CLEAR to resume normal playback or return to
the paused image.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat OFF icon appears on the TV screen.
A
B
A
*
OFF
Repeat A-B DVD
otes
ꢀ The Zoom function may not work for some DVDs.
ꢀ The Zoom function may not work on multi-angle
scenes.
To repeat a sequence in a title:
1 Press A-B at your chosen start point.
A * appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
A B appears briefly on the TV screen, and the repeat
sequence begins.
3 To cancel the sequence, press A-B.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation (Continued)
General Features (Continued)
ote
The video mode setting only works when the
Progressive Scan option is set to “On” in the Setup
menu.
MARKER SEARCH
1/9
DVD
Marker Search
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use b/B/v/V buttons to highlight your selec-
tion, then press ENTER.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use 1/2 or number button to
select a Marker number that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
DVD
Title Menu
1 Press TITLE.
4 To remove the MARKER SEARCH menu, press
SEARCH.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
To Clear a Marked Scene
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use 1/2 or number button to
select a Marker number that you want to erase.
3 Press CLEAR.
3 To remove the title menu, press TITLE again.
DVD
Disc Menu
1 Press DISC MENU.
The disc menu is displayed.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
2 To remove the disc menu, press DISC MENU again.
5 To remove the MARKER SEARCH menu, press
SEARCH.
ꢀ All markers are erased when the disc is ejected.
1 /1
DVD
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
You can then change the camera angle if you wish.
DVD
Changing Video Mode
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
DVD
Changing the Audio Language
1 ENG
D
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode number selected is displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
5.1 CH
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
ABC
1 ENG
DVD
Subtitles
ꢀ Video mode sequence:
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
MODE1 → MODE2 → MODE3 → MODE1
ꢀ If you turn off the power, the video mode will return to
initial default state (MODE1).
ote
Detailed Description of each Video Mode
MODE1 : The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with
comparatively little motion.
If appears, the feature at that moment or with that
specific DVD.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Disc Operation
MP3/WMA Recording Notes
Playing Audio CDs and MP3/WMA Discs
About MP3
CD
MP3
WMA
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
The DVD+VCR can play MP3/WMA formatted record-
ings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
About WMA (Window Media Audio) Files
1
ꢀ A WMA file is made using Microsoft audio
compression technology.
ꢀ WMA (Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3 WMA
JPEG
MP3/WMA Disc compatibility with this player is
limited as follows:
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
Use 3/4to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
2
Program
MP3 WMA
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Clear All
OFF
00:00
Use 3/4 to select a folder, and ENTER.
3 A list of files in the folder appears.
Use 3/4to select a track then press N (PLAY)
or ENTER.
Playback starts.
4
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
This DVD+VCR requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Program
Program
MP3 WMA
CD
TRACK01
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Clear All
OFF
Clear All
NORM.
00:00
1
0: 56: 18
STER.
Audio CD Menu
MP3/WMA Menu
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
ip
If you are in a file list and want to return to the Folder
list, use the 3/4to highlight and press ENTER to
return to the previous menu screen.
To stop playback at any other time, press
5 STOP (x).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Disc Operation (Continued)
CD
MP3
CD
WMA
Pause
1 Press PAUSE/STEP (X) during playback.
Repeat A-B
To repeat a sequence.
1 During disc playback, press A-B at your chosen start-
2 To return to playback, press N (PLAY) or press
PAUSE/STEP (X) again.
ing point.
The Repeat icon and “ * ” appears on the menu screen.
A
CD
MP3
2 Press A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
WMA
Selecting other Tracks
ꢀ Press SKIP . or > briefly during playback to go
to the next track or to return to the beginning of the
current track.
3 To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and “OFF” appears on the menu screen.
ꢀ Press SKIP . twice briefly to step back to the pre-
vious track.
ꢀ For audio CDs, to go directly to any track, enter the
track number using the numbered buttons (0-9) dur-
ing playback.
CD
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
CD
MP3
WMA
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
1 Press DISPLAY or AUDIO during playback.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat icon and “ALL” appear on the menu screen.
2 Use b/B to select the sound icon.
The sound option will be highlighted.
3 Use v/V to select “NORM.”, or “3D SUR”.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appear on the menu screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
CD
MP3
WMA
Search
1 Press and hold BACKWARD m or FORWARD M
for about two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold BACKWARD m or FORWARD M
repeatedly to select the required speed: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press N (PLAY).
CD
MP3
WMA
Random
1 Press RANDOM during playback or when playback
has stopped.
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
2 To return to normal playback, press RANDOM repeat-
edly until “RAND.” disappears from the menu screen.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG File Operation
JPEG
Selecting other Files
Press SKIP . or > once while viewing a picture to
advance to the next file or to the previous file.
Viewing JPEG Files on a Disc
This DVD+VCR can play discs with JPEG files and
Kodak Picture CDs. Before playing JPEG recordings,
read the Notes on JPEG Files on right.
Still Picture
1 Press PAUSE/STEP (X) while showing a slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press N (PLAY) or press
PAUSE/STEP (X) again.
Insert a disc and close the tray.
The MP3/WMA-JPEG selection menu appears on
the TV screen.
1
MP3 WMA
JPEG
To flip the picture
Press 3/4while showing a picture to flip the
picture horizontally or a vertically.
Use 3/4to select the JPEG then press ENTER.
2 The JPEG menu appears on the TV screen.
JPEG
To rotate picture
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Press 1/2 while showing a picture to rotate the
picture clockwise or counter clockwise.
Off
Slide Speed
Notes on JPEG Files
ꢀ Depending upon the size and number of the JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
Use 3/4 to select a folder, and ENTER.
3 A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
selection menu.
Tip
If you are in a file list and want to return to the Folder
list, use the 34 buttons on the remote to highlight
ꢀ Total number of files and folders on the disc should
be less than 650.
“
previous menu screen.
and press ENTER to return to the
”
ꢀ Some disc may be incompatible due to different
recording format or condition of disc.
ꢀ When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
If you want to view a particular file, use 3/4to
4 highlight the file and press ENTER or N
(PLAY).
Viewing the file proceeding starts.
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
During viewing a file, press RETURN to move to
the previous menu (JPEG menu).
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD+VCR. Even though the files are
shown as JPEG image files in windows explorer.
Folder1
JPEG
Picture1
Picture2
Picture3
Picture4
Picture5
Picture6
Picture7
Off
5/32
1024X768
Slide Speed
5/32
1024X768 Picture5.jpg
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use 1/2 to highlight the Slide
Speed option then use 3/4 to select the speed you
want to use, and then press ENTER.
To stop viewing at any other time, press STOP (x).
5 The JPEG menu appears.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
WMA
Programmed Playback
Programmed Playback with Audio CDs
and MP3/WMA Discs
Repeat Programmed Tracks
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Program function enables you to store your favorite
tracks from any disc in the player memory.
The Repeat icon and “ALL” appear on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appear on the menu screen.
Program can contain 30 tracks.
Press PROGRAM during playback or in the Stop
mode to enter the Program Edit mode.
Erasing a Track from the Program List
1
E
1 Press PROGRAM during playback or in the Stop
mode to enter the Program Edit mode.
The mark will appear to the right of the word Program
on the right side of the menu screen.
E
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
ote
Press PROGRAM to exit the Program Edit mode;
E
the
mark will disappear.
Select a track, then press ENTER to place the
2 selected track on the Program list.
Erasing the Complete Program List
Repeat step 2 to place additional tracks on the
3 Program list.
1 Follow steps 1-2 of “Erasing a Track from the
Program List” shown above.
2 Use 3/4to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
The programs are also cleared if the disc is ejected.
E
Program
E
MP3 WMA
Program
CD
FILE 8
FILE 2
FILE 4
FILE 3
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Clear All
OFF
Clear All
NORM.
00:00
3
0: 56: 18
STER.
Audio CD Menu
MP3/WMA Menu
Press 2.
The programmed track you selected last is highlighted on
the program list.
4
Use 3/4to select the track you want to start
5 playing.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
Press N (PLAY) to start.
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
6
7
To resume normal playback from programmed
playback, press PROGRAM.
Select a track of CD (or MP3/WMA) list and
then press ENTER.
“PROG.” indicator disappears from the menu screen.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
Controlling other TVs with the remote
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
You can control your TV using the buttons below.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (see the table below).
2. Release TV POWER button.
TV Control
Buttons
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works with
your TV.
Manufacturer
LG / GoldStar
Zenith
Code Number
1 (Default), 2
1, 3, 4
6, 7
8, 9
4
Samsung
Sony
Hitachi
By pressing
POWER
You can
Turn the TV on or off.
otes
ꢀ Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
INPUT
Switch the TV’s input source
between the TV and other input
sources.
ꢀ If you enter a new code number, the code number
previously entered will be erased.
CH +/–
Scans up or down through
memorized channels.
ꢀ When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
VOL +/–
MUTE
Adjust the volume of the TV.
Turns on or off TV sound.
ote
Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The power is on, but
the DVD+VCR does not
work.
ꢀ The TV is not set to receive DVD+VCR
signal output.
ꢀ Select the appropriate video input mode
on the TV so the picture from the
DVD+VCR appears on the TV screen.
No picture.
ꢀ TV/VCR mode for DVD+VCR is set to
TV.
ꢀ Press the TV/VCR button on the remote
control repeatedly to choose VCR
mode. TV indicator disappears from the
display window.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
ꢀ Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD+VCR.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cables securely.
ꢀ The power of the equipment connected
with the audio cables is turned off.
ꢀ Turn on the equipment connected with
the audio cables.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the
DVD+VCR again by pressing POWER.
The playback picture is ꢀ The disc is dirty.
poor.
ꢀ Clean the disc.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use CH/TRK (v/V) for manual tracking
adjustment while tape is playing.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The DVD+VCR does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ The disc is placed upside down.
ꢀ
Place the disc with the playback side down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the DVD+VCR.
ꢀ Point the remote control at the remote
sensor of the DVD+VCR.
ꢀ The remote control is too far from the
DVD+VCR.
ꢀ Operate the remote control within 23 ft
(7 m).
ꢀ There is an obstacle in the path of the
remote control and the DVD+VCR.
ꢀ Remove the obstacle.
ꢀ The batteries in the remote control are
dead.
ꢀ Replace the batteries with new ones.
ꢀ This remote control uses the same
buttons for VCR and DVD functions
(ex. PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Cause
Correction
Symptom
ꢀ Those channels were deleted with the
CH. ADD/DEL option.
ꢀ Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 15.
Some channels are
skipped over when
using CH/TRK (v/V
)
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
Picture and sound of
broadcasting channel
are weak or missing.
ꢀ Wrong TUNING BAND option is being
used.
ꢀ Try all TUNING BAND options. See
“Channel Selection” on page 15 for
details.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image is not
shown.
ꢀ DVD+VCR SOURCE SELECT is not set ꢀ Press INPUT to select LINE input
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
screen.
to LINE1 or LINE2.
channel (LINE1 or LINE2).
ꢀ Clock in DVD+VCR is not set to correct
time.
ꢀ Set clock to correct time. See “Setting
the Clock” on page 16.
Timer recording is not
possible.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer
Recording” on pages 22 and 23.
ꢀ
indicator does not appear after pro-
gramming timer.
ꢀ Reprogram Timer.
ꢀ DVD+VCR is in Timer Recording mode. ꢀ This is the normal indication that the
DVD+VCR is in TIMER mode.
indicator appears
after DVD+VCR is turned
off.
ꢀ TV is not Stereo-compatible.
ꢀ No action is possible.
ꢀ No action is possible.
Stereo Audio Record
and/or Playback is not
present.
ꢀ Broadcast program is not in stereo for-
mat.
ꢀ DVD+VCR A/V Out jacks are not con-
nected to TV A/V In jacks.
ꢀ Make A/V connections. Stereo is
available only via A/V output from
DVD+VCR.
ꢀ DVD+VCR Audio/Video Out is not
selected for viewing at the TV.
ꢀ Select AUX or A/V source as TV input.
ꢀ DVD+VCR BROADCAST TYPE mode is ꢀ Set BROADCAST TYPE mode to
set to SAP or MONO.
STEREO. See “VCR Setup Menu
Options” on page 15.
Moisture Condensation
In locations where moisture condensation may occur:
Moisture condensation can occur:
• When the DVD+VCR is moved from a cold place to a
warm place.
•
Keep the DVD+VCR plugged into an AC power outlet
with POWER On. This will help prevent condensation.
• Under extremely humid conditions.
• When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 18).
Language
Abkhazian
Afar
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
Language
Fiji
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
Language
Lingala
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Finnish
French
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Amharic
Arabic
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Maori
Armenian
Assamese
Aymara
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla 6678
Hebrew
Hindi
Nepali
Telugu
Thai
Bhutani
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Pashto, Pushto 8083
Persian
7065
8076
8084
8185
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Rhaeto-Romance 8277
Romanian
Russian
8279
8285
8377
8365
7168
8382
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Sanskrit
Dutch
Korean
Kurdish
Laothian
Latin
Scots Gaelic
Serbian
Wolof
English
Xhosa
Esperanto
Estonian
Faeroese
Serbo-Croatian 8372
Yiddish
Yoruba
Zulu
Shona
Sindhi
8378
8368
Latvian, Lettish 7686
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 20).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
LC
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Spain
LI
Ethiopia
LK
Sweden
Finland
LR
Singapore
FJ
Fiji
LS
Lesotho
Saint Helena
Slovenia
AL
Albania
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
LT
Lithuania
AM
AN
AO
AQ
AR
AS
AT
Armenia
LU
Luxembourg
Latvia
SJ
Svalbard and Jan Mayen
Islands
Netherlands Antilles
Angola
LV
LY
Libya
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
Slovak Republic
Sierra Leone
San Marino
Senegal
Antarctica
Argentina
France (European
Territory)
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Morocco
Monaco
American Samoa
Austria
GA
GB
GD
GE
GF
GH
GI
Gabon
Moldavia
Great Britain
Grenada
Madagascar
Marshall Islands
Macedonia
Mali
Somalia
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Australia
Suriname
Aruba
Georgia
Saint Tome and Principe
Former USSR
El Salvador
Syria
Azerbaidjan
Bosnia-Herzegovina
Barbados
French Guyana
Ghana
Myanmar
Mongolia
Gibraltar
Bangladesh
Belgium
GL
GM
GN
GP
GQ
GR
GS
Greenland
Gambia
Macau
Swaziland
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Turks and Caicos Islands
Chad
Burkina Faso
Bulgaria
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
French Southern
Territories
Bahrain
Burundi
TG
TH
TJ
Togo
BJ
Benin
S. Georgia & S. Sandwich
Isls.
Mauritius
Thailand
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
Bermuda
Maldives
Tadjikistan
Tokelau
Brunei Darussalam
Bolivia
GT
GU
GW
GY
HK
HM
Guatemala
Guam (USA)
Guinea Bissau
Guyana
MW Malawi
TK
TM
TN
TO
TP
TR
TT
MX
MY
MZ
NA
NC
NE
NF
NG
NI
Mexico
Turkmenistan
Tunisia
Brazil
Malaysia
Bahamas
Mozambique
Namibia
Tonga
Bhutan
Hong Kong
Heard and McDonald
Islands
East Timor
Turkey
Bouvet Island
Botswana
New Caledonia (French)
Niger
Trinidad and Tobago
Tuvalu
Belarus
HN
HR
HT
HU
ID
Honduras
Croatia
Norfolk Island
Nigeria
TV
TW
TZ
Belize
Taiwan
Canada
Haiti
Nicaragua
Netherlands
Norway
Tanzania
Cocos (Keeling) Islands
Central African Republic
Congo
Hungary
NL
NO
NP
NR
NU
NZ
OM
PA
UA
UG
UK
UM
Ukraine
Indonesia
Ireland
Uganda
IE
Nepal
United Kingdom
USA Minor Outlying
Islands
Switzerland
Ivory Coast
Cook Islands
Chile
IL
Israel
Nauru
IN
India
Niue
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
IO
British Indian Ocean
Territory
New Zealand
Oman
US
UY
UZ
VA
VC
United States
Uruguay
Cameroon
China
IQ
Iraq
Panama
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
IR
Iran
PE
PF
PG
PH
PK
PL
Peru
Colombia
IS
Iceland
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
Costa Rica
Former Czechoslovakia
Cuba
IT
Italy
JM
JO
JP
KE
KG
KH
KI
Jamaica
VE
VG
VI
Jordan
Cape Verde
Christmas Island
Cyprus
Japan
Poland
Kenya
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Vanuatu
Czech Republic
Germany
Wallis and Futuna Islands
Samoa
Djibouti
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
Palau
Yemen
DK
DM
DO
DZ
EC
EE
EG
EH
Denmark
Paraguay
Mayotte
Dominica
Qatar
Yugoslavia
South Africa
Zambia
Dominican Republic
Algeria
Reunion (French)
Romania
Ecuador
Cayman Islands
Kazakhstan
Laos
Russian Federation
Rwanda
Zaire
Estonia
Zimbabwe
Egypt
Saudi Arabia
Solomon Islands
Western Sahara
Lebanon
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120V, 60 Hz
19 W
16.9" X 3.1" X 10.8" (430 X 78.5 X 273 mm) (w x h x d)
8.82 lbs (4.0 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Swichable)
VCR Specifications
Head system
Timer
Tape speed
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
Tape width
Maximum recording time
Rewind time
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
More than 60 dB
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (AAA) x 2
ꢀ Design and specifications are subject to change without prior notice.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
GOLDSTAR
DVD/VCR LIMITED WARRANTY - USA
The manufacturer will repair or replace your product, at the manufacturer’s option, if it proves to be defective in
material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective
from the date (“Date of Installation”) of original consumer purchase of the product. This warranty is good only to the
original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
This is an Exchange Product. Call 1-877-714-7486 for
instructions on getting the defective unit replaced.
LABOR: 90 DAYS from the Date of Purchase.
PARTS: ONE YEAR from the Date of Purchase.
Please retain dated sales receipt and your box to return
the unit for replacement.
Replacement Units is warranted for the remaining
During the first 90 days of the Warranty Period, shipping
charges both ways will be paid by the manufacturer. During
the remainder of the Warranty Period (91-365 days), you
pay in-bound shipping charges and the manufacturer pays
return shipping charges.
period of the original warranty.
Visit our website at http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCI-
DENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH THE
PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside envi-
ronmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, light-
ning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or volt-
age, signal reception or input, software not licensed directly by LG, software errors that do not disable function-
ality, operating and software protocols adopted after the date of manufacture or for outside the US, institutional
or commercial use, or other causes not arising out of defect in material or workmanship.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
Call 1-877-714-7486 (24 hours a day, 365 days per year) and select
appropriate options from the menu.
For Where to buy, Product Assistance, or
Customer Assistance
Or visit our website at http://us.lgservice.com
FOR WARRANTY SERVICE:
You must call 1-877-714-7486 (24 hours a day, 365 days per year) and select an appropriate option from the menu
to confirm the product is defective and to obtain a Return Authorization (RA). If the defect has occurred during the
first 90 days of the Warranty Period, you will be sent a return-shipping label. After you obtain an RA for return,
please box your unit with a legible copy of the sales receipt and enough packing material to ensure undamaged
delivery of your product. When you receive the label, place it on the box and call the 800# in the instructions for
pick-up. When your unit is received, the manufacturer will replace your unit in accordance with this Limited Warranty.
ADVANCE SHIPMENT. If a replacement unit is available and you want second day delivery, our service representa-
tive will ask for your credit card number. A reserved deposit by credit card is required as surety for such advance
shipment. Your credit card will not be charged if you return the defective unit in 10 business days. For advance ship-
ment, the return label will come with the replacement unit sent to you. Please follow boxing and shipping instructions
above.
Marketed and distributed by:
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
GS# 3835RV0016K
Printed in Indonesia
Issue O
ENGLEWOOD CLIFFS, NJ
Download from Www.Somanuals.com. All Manuals Search And Download.
|