�����
�������������������
������������
����������������
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC & Safety Information
FCC Warning
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio and
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures.
•
•
Reorient or relocate the receiving antenna
Increase the separation between the
equipment and the receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
This equipment has been certified to comply
with the limits for a Class B computing device,
pursuant to part 15 of the FCC rules. Only
peripherals (computer input / output devices,
terminals, printers etc.) certified to comply
to the Class B limits may be attached to
this computer. Operation with non-certified
peripherals is likely to result in interference to
radio and TV reception.
NOTE DU DOC
This product conforms to Canadian Class B
emissions regulations.
Ce produit est conforme aux réglements
canadiens relatifs aux émissions pour les
appareils de class B.
Remarks
To meet FCC requirement, shielded cables are
required to connect the device to a personal
computer or other Class B certified device.
WARNING
FCC regulations state that any unauthorized
changes or modifications to this equipment
not expressly approved by the manufacturer
could void the user’s authority to operate this
equipment
Information to Users
The unit is for office equipment used. Any
change or modifications expressly approved by
the party responsible for compliance could void
the user’s authority to operate this equipment.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
DOC NOTICE
This product conforms to Canadian Class B
emissions regulations.
Ce produit est conforme aux réglements
d’émission Canadienne class B.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
•
•
Read instructions - All operating instructions must
be read and understood before the product is
operated.
•
When relocating the product placed on a cart, it
must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can
cause the product to fall from the cart.
Keep this manual in a safe place - These safety
and operating instructions must be kept in a safe
place for future reference.
•
Ventilation - The vents and other openings in
the cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insufficient ventilation can cause overheating and /
or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface
since they can block ventilation openings. This
product is not designed for built-in installation; do
not place the product in an enclosed place such
as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are
followed.
•
•
•
Observe warnings - All warnings on the product
and in the instructions must be observed closely
Follow instructions - All operating instructions must
be followed.
Attachments - Do not use attachments that are
not recommended by the manufacturer. Use of
inadequate attachments can result in accidents.
•
Entering of objects and liquids - Never insert an
object into the product through vents or openings.
High voltage exists in the product, inserting an
object can cause electric shock and / or short
internal parts.
•
The LCD panel used in this product is made of
glass. Therefore, it can break when the product is
dropped or applied with impact. Be careful not to
be injured by broken glass pieces in case the LCD
panel breaks.
For the same reason, do not spill water or liquid
on the product.
•
•
Servicing - Do not attempt to service the product
by yourself. Removing covers can expose you
to high voltage and other dangerous conditions.
Request a qualified service person to perform
servicing.
•
•
Heat sources - Keep the product away from
heat sources such as radiators, heaters, stoves
and other heat - generating products (including
amplifiers).
The LCD panel is a very high technology product
with many thin-film-transistors, giving you fine
picture details. Occasionally, a few non-active
pixels may appear on the screen as a fixed point
of blue, green or red. Please note that this does
not affect the performance of your product.
Repair - If any of the following conditions. unplug
the power cord from the AC outlet, and request a
qualified service person to perform repairs
a. When a liquid was spilled on the product or
when objects have fallen into the product.
b. When the product has been exposed to rain or
water.
•
If an outside antenna is connected to the
television equipment, be sure the antenna system
is grounded so as to provide enough protection
against voltage surges and built-up static
charges. Section 810 of the National Electrical
Code provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
•
•
•
Cleaning - Unplug the power cord from the Ac
outlet before cleaning the product. Use a damp
cloth to clean the product. Do not use liquid
cleaners or aerosol cleaners.
Water and moisture - Do not use the product
near water, such as bathtub, washbasin, kitchen
sink and laundry tub, swimming pool and in a wet
basement.
Stand - Do not place the product on an unstable
cart, stand, tripod or table. Placing the product
on an unstable base can cause the product
to fall, resulting in serious personal injuries as
well as damage to the product. Use only a cart,
stand,tripod, bracket or table recommended
by the manufacturer or sold with the product.
When mounting the
product on a wall, be sure
to follow the manufacturer’s
instructions. Use only
the mounting hardware
•
•
For added protection to this television equipment
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect
the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
recommended by the
manufacturer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Welcome
Unpacking your LCD TV
1. LCD TV
2. Remote Control
3. AAA Batteries (2)
POWER
INPUT
1
4
2
3
5
8
0
6
9
7
DISPLAY
10+
JUMP
CH+
FAVORITES
MENU
ENTER
VOL-
VOL+
RETURN
MUTE
CH-
CHANNEL
PICTURE
MODE
SEARCH ASPECT AUDIO
CAPTIONS
4. Power Cable
5. VGA Cable
6. TV Tuner
9. User’s Guide &
Registration Card
7. AV Cable
8. RF Cable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Welcome (cont.)
Rear Panel Overview
Push arrow mark
to open cover.
8
9
10
1
3 4
5
6
7
2
6
Audio In
1
2
AC In
Connects to the Audio Out of your AV
equipment when using the Component
Video connections.
Connects to the supplied power cable.
Video In
Connects to the Video Out of a DVD player,
VCR, or other AV equipment.
7
RF In
Connects to an Antenna, Cable TV jack,
Cable Box, or Satellite Receiver using an
RF cable.
3
4
S-Video In
Connects to the S-Video Out of a DVD
player, VCR, or other AV equipment.
8
9
VGA In
Connects to the VGA Out of a PC using a
VGA cable.
Audio In
Connects to the Audio Out of your AV
equipment when using the Video or S-Video
connections.
Audio In
Connects to the Audio Out of a PC using a
1/8” stereo mini-plug.
5
Component Video (Y/Cb/Cr) In
Connects to the Component Video Out of a
DVD player or other AV equipment.
10 Line Out
Connects to Headphones or to the Line In
of a stereo receiver using a 1/8” stereo mini-
plug.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Welcome (cont.)
Remote Control Overview
1
2
3
4
5
6
POWER
Turns TV on and off.
POWER
INPUT
1
2
10
0-9/10+
Selects channels directly.
1
4
2
3
5
8
0
6
9
DISPLAY
Displays TV status.
7
DISPLAY
3
4
10+
JUMP
11
12
CH+/-
CH+
Selects next or previous channel.
FAVORITES
VOL+/-
Adjusts volume.
MENU
VOL-
VOL+
ENTER
5
RETURN
13
14
RETURN
MUTE
Returns to previous menu or exits menu
system.
CH-
6
7
7
8
9
ASPECT
CHANNEL
SEARCH
PICTURE
MODE
ASPECT AUDIO
Sets TV aspect ratio to 4:3 (standard) or
16:9 (widescreen).
15
16
8
9
CAPTIONS
CHANNEL SEARCH
Searches for all available channels in the
selected tuner band.
CAPTIONS
Selects the desired Closed Caption mode.
10 INPUT
Changes on-screen view to PC, TV, AV
(Video In), SV (S-Video In) or YCbCr
(Component Video In).
14 MUTE
11 JUMP
Turns sound on and off.
Displays the previously viewed channel.
15 PICTURE MODE
12 FAVORITES
Sets picture brightness to standard (normal
viewing conditions), demo (brighter viewing
conditions), or favorite (custom viewing as
set in Picture menu).
Selects your favorite channels as set in the
TV Settings menu; see page 14.
13 MENU/ENTER
Displays the on-screen menu system.
Confirms settings in the menu ystem.
16 AUDIO
Selects Stereo, Mono, or SAP.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Welcome (cont.)
TV Control Overview
You can also use the buttons on top of the unit for basic TV functions, including:
•
•
•
•
•
•
INPUT
EXIT
CHANNEL /
VOL /
MENU/ENTER
POWER
CHANNEL
VOLUME
ENTER
MENU
AUTO
INPUT
EXIT
UP DOWN
-
+
These buttons have
the same functions as the
corresponding buttons on the
remote control (see page 7).
NOTE: If you have a PC
connected to the LCD TV,
press the AUTO button to
automatically adjust the PC
display to fit the LCD screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - Getting Started
Step 1 - Insert Remote Control Batteries
Install the supplied batteries as shown below, paying attention to the correct polarities.
In
Out
IR Sensor
Power LED
-
+
+
-
Point the remote control directly at the IR
sensor located on the front of the TV.
Caution
•
•
•
•
Do not expose the remote control to severe shock or vibration.
Do not expose the remote control to liquids, or in an area with high humidity.
Do not place the remote control in direct sunlight. The heat may damage the unit.
The remote control may not work properly if the IR sensor is exposed to direct
sunlight or other strong lighting. If this is the case, change the angle of the lighting or
LCD TV, or operate the remote control closer to the IR sensor.
•
•
•
•
If the remote control fails to operate, replace the batteries in the remote control.
Improper use of batteries can result in a leakage of chemicals and / or explosion.
Place batteries with their terminals corresponding to the correct polarities (+) and (-).
Different types of batteries have different characteristics. Do not mix batteries of
different types.
•
•
Remove batteries when they become weak.
The batteries supplied with the product may have a shorter life expectancy due to
storage conditions.
•
•
If the remote control is not used for an extended period of time, remove the batteries
from the remote control.
Objects between the remote control and IR sensor may prevent proper operation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - Getting Started (cont.)
Step 2 - Connect Power Cable
1
2
Connect the supplied power cable to the AC In jack on the back of the LCD TV.
Plug the power cable into a standard AC outlet.
Caution
•
•
Always turn the the LCD TV off when connecting the power cable.
Always unplug the power cable from the LCD TV and power outlet when not using the
TV for a long period of time.
•
The LCD TV has a universal power supply that allows operation with either 100/120V
AC or 220/240VAC voltage. No user-adjustment is required.
Step 3 - Connect to Antenna/Cable
Connect the TV to your antenna or cable/satellite hookup (or PC) as shown.
VGA Cable
Connect to PC
Connect to Antenna
or Basic Cable
Connect to Cable Box or
Satellite Receiver
OUTPUT
VIDEO S-VIDEO
RF
AUDIO
IN
OUT
L
R
RF Cable
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - Getting Started (cont.)
Step 4 - Turn on TV
Press POWER on the remote control.
•
•
The Power indicator will turn green.
Press POWER again to turn off the TV.
Step 5 - Search for Channels
Press SEARCH on the remote control.
•
•
•
The LCD TV will automatically search for all available channels.
To change the tuning band, see TV setup.
To add or delete channels, see TV setup.
Step 6 - Select Channels
To select a channel, use the CH /buttons, or enter a 1-, 2- or 3 -digit number as follows:
To select a 1- or 2-digit channel number (e.g., channel 5)
1
2
Press the 0 button.
Press the 5 button.
* or simply press the 5 button.
To select a 3-digit channel number (e.g., channel 115)
Complete the following procedure within 4 seconds.
1
2
3
Press the 10+ button.
Press the 1 button.
Press the 5 button.
To select another input
Press INPUT to change the on-screen view to PC, TV, AV (Video In), SV (S-Video In) or YCbCr
(Component Video In).
Notes:
•
•
•
With the Antenna Source set to Antenna, you can select channels 1-69.
With the Antenna Source set to Cable, you can select channels 1-125 channels.
To set or change the Antenna Source; see page 14.
Step 7 - Adjust Volume
Press the VOL+/- buttons to adjust the volume.
•
To mute the sound, press MUTE.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - Getting Started (cont.)
Step 8 - Adjust Screen Angle
To set the LCD TV to a comfortable viewing
angle, tilt the screen up to 5 degrees forward or
20 degrees backward.
0
0
5
20
Step 9 - Connect Optional Wall Mount
1
2
Remove the supplied stand as shown.
Attach the LCD TV to a standard VESA Arm
wall mount (100 x 100 mm).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Advanced Settings
Color
Menu System Overview
Press MENU/ENTER to display the Color
Menu, then press /to select from the
following options:
Press the MENU/ENTER button to view the
five main menu categories:
•
•
•
•
•
PC
TV
Video
OSD
Audio
OSD
Audio
Depending on the input you are viewing, one or
more of these options will be dimmed.
•
•
6500K/7500K/9300K - Press /to
select the desired color temperature.
PC Settings
User - For a custom color temperature,
press /to select the individual RGB
(Red, Green, and Blue) sliders. Then use
/ to fine tune each color.
If you are using the LCD TV as a PC monitor,
you can use the PC menu to adjust the
brightness, contrast, color, size, and position of
the PC display.
Image
Press MENU/ENTER to display the Image
Menu, then press /to select from the
following options:
1
Press INPUT until PC appears in the upper
right-hand corner.
•
If you do not have a PC connected to
the VGA Input you cannot view the PC
settings menu.
2
3
4
Press MENU/ENTER to display the main
menu.
Press /to select PC and press MENU/
ENTER.
Press /to select from the following
options:
•
•
•
H-Size - Press /to set the width of
the PC display.
Fine - Press /to set the sharpness
of the PC display.
H-Position - Press /to set the
horizontal position (left/right) of the PC
display.
•
•
V-Position - Press /to set the
vertical position (up/down) of the PC
display.
Brightness
•
Press /to set the brightness level.
Contrast
Press /to set the contrast level.
Auto Adjust - Press MENU/ENTER to
automatically adjust the PC display to fit
the screen.
•
Information
•
Displays the resolution (e.g. 640 x 480)
and refresh rate (e.g., 60 Hz) of the PC
display.
Reset
Restores factory settings.
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Advanced Settings (cont.)
Picture
TV Settings
Press MENU/ENTER to display the Picture
Menu, then press /to select from the
following options:
The TV settings menu allows you to adjust
channels, picture settings, timers, V-Chip
ratings, closed captions, and more.
1
Press INPUT until the current channel
number appears in the upper right-hand
corner (TV mode).
2
3
4
Press MENU/ENTER to display the main
menu.
Press /to select TV and press MENU/
ENTER.
Press /to select from the following
options:
•
Picture Mode - Press /to select
Standard (normal viewing conditions),
Vivid (brighter viewing conditions), or
Custom (personalized setting).
•
•
•
•
Brightness - Press /to set the
brightness level.
Contrast - Press/to set the
contrast level.
Sharpness - Press /set the picture
sharpness.
Color - Press /to set the color
saturation.
Set-Up
•
•
Tint - Press /to set the hue.
Press MENU/ENTER to display the Setup
Menu, then press /to select from the
following options:
Video N.R. (Noise Reduction) - Press
/to select Off, Low (minimum
noise reduction), Med (moderate noise
reduction), or High (maximum noise
reduction).
ANT. SOURCE
AUTO SEARCH
CHANNEL EDIT
FINE TUNING
FAVORITE
Sleep Timer
•
Press /to have the TV turn off
automatically in 30, 60, or 90 minutes
ANTENNA
•
Select Off to cancel the Timer feature.
V-Chip
•
•
•
Antenna Source - Press /to select
Use the number keys to enter a 4-digit PIN
(Personal Identification Number), then press
/to select from the following options:
Antenna or Cable.
Auto Search - Press to begin
searching for all available channels.
Channel Edit - Press/to Add or
Erase the selected channel from your
channel list.
Fine Tuning - Press/to fine
tune the selected station in 0.05MHz
increments.
Favorite - Press/to select Normal
or User and press MENU/ENTER. If you
select User, press /to select one
of the 20 placeholders for your favorite
channels, then enter the channel number
directly (using the 0-9) keys for each
placeholder. All channel numbers that
are set to 0 will be disabled.
•
•
TV Rating - Press /to set the
maximum allowed TV rating.
Movie Rating - Press /to set the
maximum allowed Movie rating.
•
•
•
•
New Password - Use the number keys
to enter a new 4-digit PIN. Enter the
password again to confirm.
Enable - Press /to select Yes
(enable V-Chip) or No (disable V-Chip).
Closed Caption
•
Press /to set Closed Captions to
CC1, CC2, TT1, TT2, or Off.
Clean Memory
Erases all stored TV channels.
•
Reset
Restores factory settings.
•
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Advanced Settings (cont.)
•
Video N.R. (Noise Reduction) - Press
Video Settings
/to select Off, Low (minimum
noise reduction), Med (moderate noise
reduction), or High (maximum noise
reduction).
If you have connected an audio/video device,
such as a DVD player or VCR, to the AV inputs,
you can use the Video menu to adjust picture
settings, V-Chip ratings, closed captions, and
more.
Sleep Timer
•
Press /to have the TV turn off
automatically in 30, 60, or 90 minutes
1
Press INPUT until AV appears in the upper
right-hand corner.
•
Select Off to cancel the Timer feature.
V-Chip
•
If you do not have an AV device
connected to the AV Inputs you cannot
view the Video settings menu.
Use the number keys to enter a 4-digit PIN
(Personal Identification Number), then press
/to select from the following options:
2
3
4
Press MENU/ENTER to display the main
menu.
Press /to select Video and press
MENU/ENTER.
Press /to select from the following
options:
•
•
TV Rating - Press /to set the
maximum allowed TV rating.
Movie Rating - Press /to set the
maximum allowed Movie rating.
•
•
New Password - Use the number keys
to enter a new 4-digit PIN. Enter the
password again to confirm.
V-Chip - Press /to select Yes
(enable V-Chip) or No (disable V-Chip).
Closed Caption
•
Press /to set Closed Captions to
OFF, Cap1, Cap2, Text1, or Text2.
Picture
Reset
Restores factory settings.
Press MENU/ENTER to display the Picture
Menu, then press /to select from the
following options:
•
•
Picture Mode - Press /to select
Standard (normal viewing conditions),
Vivid (brighter viewing conditions), or
Custom (personalized setting).
•
•
•
•
•
Brightness - Press /to set the
brightness level.
Contrast - Press/to set the
contrast level.
Sharpness - Press /set the picture
sharpness.
Color - Press /to set the color
saturation.
Tint - Press /to set the hue.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Advanced Settings (cont.)
V-Position
OSD Settings
•
Press /to move the menu up and
The OSD (On-Screen Display) menu allows
you to set the language, position, size, and
style of the on-screen menu system.
down.
OSD Timeout
•
Press /to set how long the menu
will be displayed before it times out
1
Press INPUT to select any active input.
(disappears from the screen).
•
The menu system will only display if
there is a signal detected for the selected
input.
OSD Size
•
Press /to select Large (magnify
the size of the menu) or Small (keep the
standard size).
2
3
4
Press MENU/ENTER to display the main
menu.
Press /to select OSD and press
MENU/ENTER.
Press /to select from the following
options:
OSD Style
•
Press /to select Normal (display the
menu normally) or Dim (dim the menu so
you can see the TV behind it).
Language
•
Press /to set the menu language
to English, French, Italian, German, or
Spanish.
H-Position
Press /to move the menu left and
right.
•
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Advanced Settings (cont.)
Balance
Audio Settings
•
Press /to set the balance between
the TV’s left and right speakers.
The Audio menu allows you to set the LCD
TV volume level, balance, bass, treble, and
loudness.
Bass
•
Press /to set the bass level.
1
Press INPUT to select any active input.
Treble
•
The menu system will only display if
there is a signal detected for the selected
input.
•
Press /to set the treble level.
Loudness
2
3
4
Press MENU/ENTER to display the main
menu.
Press /to select Audio and press
MENU/ENTER.
Press /to select from the following
options:
•
Press /to select Yes (boost the
overall audio level) or No (keep the
standard audio level).
Volume
•
Press /to set volume level.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Help
Troubleshooting
Symptom
No picture or sound.
Solution
• Ensure power cable is properly inserted in power outlet.
• Ensure power is on.
• Ensure correct input is selected.
No sound.
• Ensure volume is turned up.
• Ensure sound is muted.
• Ensure headphones are not connected.
• Ensure input source is connected.
Noisy picture and sound.
Picture is not clear.
• Ensure antenna cable is properly connected.
• Ensure input source is properly connected.
• Ensure antenna is properly oriented.
• TV signals may be weak for some channels.
Picture is light or poorly tinted.
• Check Color setting.
• Check Tint setting.
Picture is too dark.
• Check Brightness setting.
• Fluorescent lamp may have reached end of serviceable life.
Remote control does not work.
Picture is not sharp.
• Check remote control battery.
• Keep IR sensor away from strong fluorescent lighting.
• Broadcast reception may be weak.
• Ensure antenna is properly oriented.
• Check Sharpness setting.
Picture is doubled or tripled.
Picture is speckled.
• Ensure antenna is properly oriented.
• Broadcast signals may be effected by mountains, buildings, etc.
• May be interference from cars, trains, high voltage lines, neon lights,
etc.
• May be interference between antenna and power cable. Try positioning
them further apart.
Stripes on screen or colors fade. • May be interference from other devices. Radio and cell phone
transmission antennas may also cause interference.
• Use the LCD TV as far away as possible from devices that may cause
possible interference.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Help (cont.)
Technical Specifications
Front Panel Controls
Mode selector: (PC/TV/Video/S-Video/YCbCr), Channel Search, Input,
Return, Ch+/-,Vol /-, Menu /Enter, Power
IR remote
Remote control
Audio System
Stereo 3W + 3W speakers
OSD Controls (PC)
Contrast, Brightness, H-Position, V-Position, Phase (Pixel Adj),
Recall Defaults, Auto Adjust, Information, Clock,
6 Languages, OSD Position, OSD Timeout, Volume, Mute
Channel Edit, Auto Scan, Stereo, 5 Languages, Sharpness, NR, Reset,
Contrast, Brightness, Tint, Color, Timer Off, OSD Transparent, V-Chip,
Closed Captions, Loudness, Balance, Treble, Bass
21.3” x 18.2” x 8.2” (540 x 462 x 209 mm) (approximate)
18.1 lbs. (8.2 kg) (approximate)
OSD Controls (TV/Video)
Dimension (W x H x D)
Weight
Operating Temperature
Humidity
41°F to 104°F (5°C to 40°C)
10% to 80% (non-condensation)
Altitude
Up to 12,000 ft
Safety/EMI Regulation
Power Saving
UL/CSA/FCC
VESA DPMS standard
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Help (cont.)
Power Saving Mode (PC only)
The LCD TV is equipped with a power management function which automatically reduces power
consumption in three power saving modes when not in use.
Horizontal
SYNC.
STATE
LED
POWER
Vertical SYNC.
ON
STANDBY
OFF
Green
Amber
Amber
< 70W
< 4W
< 4W
ON
ON
ON
OFF
OFF
OFF
Compatible PC Video Mode
Mode
Resolution
H. Freq. (KHz) Band Width (MHz)
1
2
3
4
5
6
7
8
9
VGA 720 x 400
VGA 640 x 480
MAC 640 x 480
VESA 640 x 480
VESA 640 x 480
VESA 800 x 600
VESA 800 x 600
VESA 800 x 600
VESA 800 x 600
31.47 KHz
31.47 KHz
35.00 KHz
37.86 KHz
37.5 0 KHz
35.10 KHz
37.88 KHz
46.88 KHz
48.08 KHz
70 Hz
60 Hz
67 Hz
72 Hz
75 Hz
56 Hz
60 Hz
75 Hz
72 Hz
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Help (cont.)
Limited Warranty
Who Provides the Limited Warranty
During the warranty period, the GoVideo Warranty Administrator will honor service
for 90 days labor, 1 year parts from the original date of consumer purchase. See
below for Commercial, Industrial or Educational use coverage. Remote controls are
warrantied for 90 days from the date of purchase.
Who is Protected
This warranty protects the original consumer owner of this GoVideo product.
What is Covered and How Long
This warranty covers internal operating parts and service/labor to repair or replace covered parts in
this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defined as follows: (1)
Original Consumer Retail Purchase; (2) First Rental Purchase Agreement; or (3) First Lease Purchase
Agreement (the “Warranty Period”). Labor and replacement parts supplied during the Warranty Period
are covered only for the remaining portion of the original Warranty Period. The GoVideo Warranty
Administrator shall have no liability for service under this warranty if non-OEM (Original Equipment
Manufacturer) replacement parts are used in the repair of your GoVideo product.
What the Owner Must Do If Service is Required
Please contact our customer service department at 1-800-736-7679 to repair or replace your product,
at GoVideo’s option, if it proves to be defective in material or workmanship under normal use, during
the warranty period listed above, effective from the date of original consumer purchase of the product.
Repaired or replacement units are warrantied for the remaining period of the original warranty. Please
retain dated sales receipt. Within the warranty period, the customer pays for inbound shipping charges
and GoVideo pays return shipping charges.
Other Warranty Coverage
Commercial, Industrial or Educational use has the same warranty coverage as stated in this warranty.
What are the Exceptions
This warranty does not cover: (1) Normal maintenance service, such as cleaning. (2) Damage from
misuse, abuse neglect or accident, natural disasters or Acts of God. (3) Cabinetry, decorative parts,
A/C adapters, knobs or buttons. (4) The foreign country use of this product. (5) GoVideo product
which has been electronically or mechanically modified in any way or incorporated into other products.
(6) Installation and setup service adjustments. (7) Owner instruction. Your Owner’s Guide provides
information regarding operating instructions and user controls. For additional information, contact your
authorized GoVideo dealer.
Go Video is not responsible for any shipping, handling or insurance charges.
This Exclusive Limited Warranty excludes all incidental and consequential damages. Some states do not
allow the exclusion of incidental and consequential damages, so the above exclusion may not apply to
you.
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY PERIOD. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
This Exclusive Limited Warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
GOVIDEO WARRANTY ADMINISTRATOR
7835 East McClain Drive • Scottsdale, Arizona 85260-1732
1-800-736-7679
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|