Generac Power Systems Portable Generator Transfer Switches and Accessories User Manual

standby

Generators

p r o d u c t c ata lo g

residential

commercial

liGht

industrial

portable Generators

automatic standby Generators

transfer switches and accessories

Download from Www.Somanuals.com. All Manuals Search And Download.

How MucH Power do you need?

tranSfer SwitcH

confiGurationS

automatic transfer Switch basic

Whole-House Protection

Generac offers air-cooled and liquid-cooled generators that can supply up to

whole-house protection. in conjunction with a transfer switch, this application

completes your power solution package (see page 8 for options).

rtS-e models

to accurately size liquid-cooled generators, a licensed electrician should apply

an amp meter to the circuits and appliances to determine the load requirement

for back up.

SHEDDING

SF TC

AUT

Sizing Guide

Air Cooled Generator

5-Ton Central Air ¹

4-Ton Central Air ¹

3-Ton Central Air ¹

Well Pump or Water Heater

Family Room

8 kW 10 kW 14 kW 17 kW

Circuits

20 kW

rtS-S models

(50 Amp / 240V)²

(40 Amp / 240V)²

(30 Amp / 240V)²

(20 Amp / 240V)²

(20 Amp / 120V)

(15 Amp / 120V)



•



Master Bedroom

Home Office



rtS-n models

Media Room



automatic transfer switch basic is rated

nema 1. all rts-n, rts-e & rts-s

transfer switches are nema 3r (outdoor/

indoor) rated.

Garage



Kitchen (#1)³

Kitchen (#2)³

Bathroom



Furnace

note: warranty coverage is not

available for generators that are

used for prime power (main power

source) in place of the existing

utility power where utility power is

present or in place of utility power

where utility power service does

not normally exist. for life support

or critical care applications, please

see page 6 for industrial units.

Sump Pump

Bedroom (#2)

Bedroom (#3)

Bathroom (#2)



¹check your air conditioner’s starting requirements. starting requirements for older and/or less efficient equipment may exceed

recommended generator capability. additionally, for any electrical equipment or appliances, always check the manufacturer’s

power requirements. this will help to ensure standby power accommodations for items that cycle during operation.

²240 volt appliances require 2 circuits ³most kitchens require multiple circuits

for smaller central air up to 2 tons

•

note: rooms and appliances indicated here are for example only. you may choose others that better reflect your needs. because of the

cycling nature of some appliances such as refrigerators and furnaces, it may not be possible for all appliances to run simultaneously.

Download from Www.Somanuals.com. All Manuals Search And Download.

air-cooled 8 – 20 kw

GENErAC AIr-COOLED MODELS

America’s #1 selling home standby generator

Generac air-cooled models feature Generac’s ohVi industrial

engines for reliability and long life, and plateau honing to

significantly decrease service intervals.

8-17 kW

8 kW / 10 kW / 14 kW / 17 kW MODELS (STEEL)

Air-cooled models for essential circuit protection

smaller air-cooled models provide essential circuit

protection for small to medium sized homes.

Engine horsepower strength:

Generac ohVi^®(overhead

Valve industrial) engines

continuous Fuel: all models run on lp gas or natural

•

are specifically designed for

generator demands. the 2-year

oil change interval, full-pressure

lubrication system and spin-on

oil filter contribute to the longest

running engine in the industry.

gas, providing continuous power with reduced emissions.

circuit coverage: individual models can protect

8, 10, 12, 14, or 16 circuits in your home.

•

true power™ technology for sensitive electronics:

10-17 kw units feature an electronic governor for smooth and consistent output with less

than 5% total harmonic distortion for sensitive electronic equipment and appliances.

•

Steel Enclosures: all steel enclosures feature durable galvanneal finish which bonds

zinc to steel for superior rust and corrosion protection.

•

Composite Mounting Pad: provides for easier installation.

•

ul listed: ul 2200 listing ensures the generator meets local building code approval,

safety and certified kw power ratings.

•

External dual gFcI outlet: easy access to power for outdoor equipment available on

17 kw model.

•

17-20 kW

17 kW AND 20 kW MODELS (ALUMINUM)

Control Panel for

The quietest and most powerful air-cooled

protection on the market

10 - 20 kW air-cooled generators

the easy-to-use control panel

features user-friendly lcd digital

controls, providing bilingual plain

text display.

these larger air-cooled models are the quietest and most

powerful generators of their size on the market today. the

20 kw model includes the base fascia for a finished look

and thorough protection from debris and rodents. they

include all the features of the 8-17 kw models above as

well as the following:

Quiet-test™: the patented Quiet-test low-speed

exercise mode for up to 50% quieter weekly self-test.

•

Increased circuit coverage: the 20 kw model

provides up to whole-house protection.

•

aluminum all-Weather Enclosures: all-weather corrosion resistant

aluminum enclosures prolong the life and look of the generator. ideal for

salt air coastal communities.

•

External dual gFcI outlet: easy access to power for outdoor equipment.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

liquid-cooled 22 – 150 kw

QT SErIES

The quiet standard in liquid-cooled

automatic standby power

Quiet-Test™ feature:

Generac’s Qt series generators have redefined backup

power for larger residential and commercial applications.

these models feature automotive grade liquid-cooled

engines for proven power and performance.

reduces noise by lowering engine

speed during the generator’s

weekly self-test cycle. the ultra-

quiet sound level is comparable

to a car at idle, up to 50% quieter

With outputs ranging from 22 to 150 kW, these QT models feature:

than when the generator is

operating under normal load.

• Quiet-Test™: all models feature the patented Quiet-test low-speed exercise mode

for quieter weekly self-test.

• Durable Enclosures:

–

Steel enclosures have a galvanneal paint finish which bonds zinc to steel

for superior rust and corrosion protection.

–

Aluminum enclosures are corrosion resistant and ideal for salt air

coastal conditions.

• Continuous Fuel: all models run on lp gas or natural gas, providing continuous

fuel and reduced emissions.

r-Series Controller for

22-60 kW Liquid-cooled

generators

full system monitoring including

led indicators for safety

shutdowns, fuel pressure and

battery voltage. integrated

transfer switch controller for rts

transfer switch.

• Stable Output: clean, consistent power for sensitive electronics. ul listed.

• Transfer Switches: matching transfer switches sold separately. rated from 100 to

800 amps. see page 8.

22-60 kW

22 kW – 60 kW MODELS

ideal for many large residential and commercial

applications. a perfect size for small office

buildings, churches, municipal buildings,

retail centers, police stations, schools, farms,

convenience stores and restaurants.

H-100 Controller for 70 kW

and above Liquid-cooled

generators:

offers quick access and

simultaneous monitoring of key

generator functions. integrated

transfer switch controller for

hts transfer switch.

70-150 kW

70 kW – 150 kW MODELS

a superior solution for applications that require more

sophisticated monitoring and diagnostic capabilities.

applications range from supermarkets and pumping

stations to strip malls and hotels.

ADvANTAGES Of GASEOUS fUEL

natural gas is delivered reliably

and continuously underground.

natural gas demand drops

significantly during a power

outage, assuring more than

adequate supply.



spark-ignited engines start more

easily than diesel engines in cold

climates. spark-ignited engines

are also quieter in terms of noise,

vibration and harshness.

Gaseous fueled engines emit fewer

pollutants than other fuels and are

more environmentally friendly.



Download from Www.Somanuals.com. All Manuals Search And Download.

Modular Power SySteMS • GeMini • Bi-Fuel

GEMINI^®TWIN PACk

fOr HIGHEST POWEr

DENSITy

INDUSTrIAL POWEr frOM GENErAC’S

MODULAr POWEr SySTEMS

for applications requiring greater amounts of standby

when space is at a premium and

power, the mQt100 and mQt150 models are ideal.

reliability is critical, no other

available through your local Generac industrial

dealer, the output of these gensets can be combined

to form a Generac modular power system (mps).

mQt series modular power systems are building

manufacturer comes close to

Generac’s Gemini twin pack.

part of the mps family, these units

feature two 500 kw generators inside

blocks that link together to combine the power output

a single, weather resistant and sound

equal to one large single generator. with the ability to

attenuated enclosure. the exclusive

parallel up to ten 100 kw units or up to ten 150 kw

units, these generators can satisfy higher end

requirements ranging from 100 to 1500 kw.

powermanager™ control system

allows for combining the output of

large, single engine gensets with a

significant improvement in reliability.

• Smaller footprint than many

comparable single engine models

redundancy

because each mQt generator within the system backs up the others, critical loads receive

extra protection and building managers enjoy greater peace of mind.

• Built-in redundancy for superior

system reliability

• Scalable solution – up to seven

Gemini gensets can be paralleled

without additional switchgear for

up to 7,000 kw in total output

Serviceability

mQt generators use modified high volume truck or industrial engines that can be serviced

using readily available, cost-effective parts. since each generator backs up the others,

servicing can be accomplished without losing backup power to critical loads.

• Fast production turn around –

often within weeks

Scalability

a Generac modular power system can be expanded as facilities grow. there is no need

to replace the system if future power requirements exceed projections and no need to

over-spend on a larger system that might never be fully utilized.

• Easily serviced with common parts

Flexibility

mps modules provide unmatched flexibility because they can be placed in any configuration

side by side, end to end, together or apart. they are light enough for most rooftop

applications and the lower weight eliminates the need for heavy-duty cranes and material

handlers during installation.

THE GENErAC

INDUSTrIAL DEALEr

NETWOrk

BI-fUEL™

installation, start-up and servicing of

modular power systems require

specialized knowledge and expertise.

Generac industrial dealers have

factory-trained personnel to ensure

that your customers get the best

possible solution, fast delivery,

Longest run Times in the Industry

Generac bi-fuel generators start on diesel fuel and add natural gas as load is applied.

during an outage, they typically operate on a mixture of up to 70% natural gas and

30% diesel fuel (contact factory for product specifications). if the natural gas supply is

interrupted, the generator automatically switches to 100% diesel without any power drop

during the transition.

professional installation and start-up.

Benefits of Bi-fuel

if a customer needs a diesel-powered

generator or a generator size that is

beyond the scope of the Qt series

line, a Generac industrial dealer can

meet requirements up to 9,000 kw.

• Dramatically increased run times

• Minimal on-site fuel storage

• Reduced fuel maintenance

• Reduced environmental risk

• Lower particulate and NOx emissions

Generac industrial dealer certified

service technicians are fully trained

on all Qt series generators and

can provide your customers with

hassle-free maintenance and

service agreements.

Download from Www.Somanuals.com. All Manuals Search And Download.

Portable 1800 – 17500 wattS

Better power. More choices.

from home use to camping, construction or outdoor events, Generac portable generators

provide dependable portable power. power the fun stuff or cover an emergency. the wide

range of sizes gives you flexibility to choose as much power as you need.

• Generac OHVI^®Engine*: Generac’s

original and proven overhead Valve

industrial engines provide the longest

running time in the industry.

• Steel Fuel Tank: includes incorporated

fuel gauge.

• Low-Tone Muffler: provides quiet

operation.

• Electric Start*: includes starting battery.

• Fold-Down Handles: provide easy

portability.

• Never-Flat Wheels: provide all-terrain

portability.

* see specs for available models.

• Hour Meter*: tracks usage and includes

maintenance resets.

XP SerieS

xp series

xP SErIES: 4000 — 10000 WATTS

the professional grade Xp series of portable generators has been engineered for high

performance. durable construction with oversized full wrap frame tubing and impact

resistant corners minimizes damage from rough handling. these rugged units also include:

• true Power™ technology for utility quality

electrical output for sensitive electronics

• external battery charge Jack on

electric start models

• low-oil Pressure Protection to protect

engine from damage

• circuit breaker outlet Protection

including dual breakers on

120/240V outlets

• covered outlets for more protection from the

environment

• cord Set included 25’/30 amp

• Start/Stop fuel Shut-off and choke controls • Maintenance kit included

conveniently located on outlet panel

GP SerieS

gp series

GP SErIES: 1800 — 17500 WATTS

gp 1800 —8000 Watts

easy to use in a variety of applications, our Gp series of portable

generators offers affordable reliability. features include:

• Hardened Steel tube cradle for durability

• low-oil Shutdown shuts engine down when oil runs low and prevents

serious damage

• circuit breaker Protected outlets for circuit protection

• Hour Meter with maintenance resets (excludes Gp1800 and Gp3250)

gp 15000E — 17500E Watts

two of the most powerful portable generators on the

market offer exceptional value:

• 16-Gallon fuel tank provides extended run time

• idle control increases fuel efficiency

• included accessories wheel kit and lifting eye

Download from Www.Somanuals.com. All Manuals Search And Download.

autoMatic tranSfer SwitcHeS

POWErMASTEr™

LOAD SHEDDING

DEvICE

transfer switches

AUTOMATIC TrANSfEr SWITCHES

as a part of the generator system, the transfer switch transfers the electrical load onto the

generator when power fails. when utility voltage returns, the transfer switch safely returns

circuit coverage back to the utility.

create priority loads to ensure

home comfort during a power

loss! the powermaster is a load

shedding device that allows

a home owner to operate two

large electrical loads instead

of only one large appliance.

examples of this include a

central air conditioner or an

electrical hot water heater. when

the priority load is running,

the powermaster will lock out

the other piece of equipment,

keeping it from turning on until

the demand is satisfied for the

priority load. after the demand is

satisfied, the powermaster allows

the secondary load to come

online and operate.

Distributed Load Center

Generac offers three models of automatic transfer switches for homeowners who

choose to back up selected circuits rather than the entire house. pre-wired load

center models are available with a choice of 8, 10, 12, 14 or 16-circuits.

Generac makes installation easy and inexpensive.

all distributed load center models include:

• 30 ft. pre-wired conduit for connecting the transfer

switch to the external connection box

• 2 ft. pre-wired conduit for moving circuits from

the main panel to the transfer switch

• Pre-wired external connection box with a weather-proof

conduit for generator connections

PowerManager™ Load Shedding Transfer Switch

the powermanager lts is designed to allow the most efficient use of the generator by

monitoring and managing the backed up selected and non-selected circuits.

if the generator approaches overload condition, the non-selected circuits are

cycled off, allowing the selected circuits to remain powered. this switch is

designed to operate with the digital controls that are used on single-phase

air-cooled and liquid-cooled generators from 17 kw through 48 kw.

• Housed in an aluminum NEMA 3R, outdoor rated enclosure

for use with units

• Service entrance rated at 200 Amps with built-in 16 circuit

priority load center

up to 60 kW

• Main contactor protects the selected priority circuits while the

secondary contactor protects the remaining, non-selected

circuits located in the existing electrical panel

• Cover is side hinged for easy access

RTS Transfer Switches

rts transfer switches are designed for a wide variety of applications that

require up to 400 amps. the rts is integrated with the r-series digital

controller and operates only with standby generators thru 60 kw.

nema 3r (outdoor rated) enclosures are standard.

RTS-N (Single and Three-Phase)

use rts-n models for custom installations or with

applications that require a sub-panel.

• 100, 200, or 400 Amp

RTS-E with Service Disconnect (Single-Phase)

use rts-e models with service disconnect for quick and

easy installations.

• 100, 200, or 400 Amp

• Service-entrance rated and UL Listed (U.S. only)

(shown without cover)

Download from Www.Somanuals.com. All Manuals Search And Download.

autoMatic tranSfer SwitcHeS

™

THE GENrEADy™ LOAD CENTEr –

EZ TrANSfEr

OPErATOr™

The future in generator installation

the eZ transfer operator was

developed by Generac to

the Genready load center simplifies the generator system

and installation and maximizes customer savings. in addition,

advanced engineering creates the easiest and most cost-effective

installation of any home standby generator on the market. new home

construction, or renovations requiring electrical upgrades, are the

opportune time to install a Genready load center and a Generac

automatic home standby generator.

install into the Genready load

center. when installed with

a generator, it automatically

transfers the protected circuits

from utility to generator power

during a power outage. when

utility is restored, the eZ

with a traditional generator installation, three boxes are required:

the main circuit panel, the automatic transfer switch, and the

emergency circuit panel.

transfer operator returns the

circuits back to utility power.

the Genready load center replaces the main circuit panel and

incorporates an automatic transfer switch so all power switching is

handled within one unit. it becomes a hybrid panel capable of separating out only the

electrical circuits the homeowner chooses to back up during a power outage.

Features include:

• 40 circuit capacity with the use of tandem breakers

• Dimensions same as a standard 42-circuit main load center

• Utilizes standard Siemens Load components

• Compatible with generators rated up to 125 Amps/30 kW

• Single-Phase applications only

Traditional Installation

Genready™ Installation

B U I L D E R

A^lliance

program

200 Amp

BUILDErS –

Join the Generac Builder

Alliance and get cash back

for generator purchases

Automatic

Transfer

Switch

Emergency

Load

Center

Main Load

Center

42-Space

offer your new home customers

the safety and comfort of

GenReady Installation Levels

Basic Advanced Complete

automatic standby power and

increase your profits at the same

time. starting from the first unit

you buy, Generac will give you

cash back for your generator

purchases. in addition to the profit

earned from each sale, you will

receive cash rebates for product

purchased through your indicated

builder alliance partner(s).

The innovative GenReady load center combines

three boxes into one, saving space and money on

generator installations!

HTS TrANSfEr SWITCHES

(Single-Phase and Three-Phase)

hts transfer switches, designed for simple monitoring,

operation and maintenance, are constructed to ensure superior

performance. the hts is part of an integrated system and

operates only with Generac commercial-series generators

(70-150 kw) with the h-100 controller. all switch components are

front adjustable and removable for programming and servicing.

Program Beneﬁts:

as a builder, when you join the

program you will receive:

• 200 New Home Owner

brochures

• Marketing support cd

recoMMended

SwitcH

recoMMended

SwitcH

• Factory contact information

and sales tools

Model

Qt022 ........................rts 100

Qt025 ........................rts 100

Qt027 ................ rts 100-200

Qt030 ................ rts 100-200

Qt035 ................ rts 100-200

Qt045 ................ rts 100-200

Qt060 ................ rts 100-400

Qt070 ................hts 100-400

Qt080 ................hts 150-400

Qt100 ...............hts 200-600

Qt130 ................hts 200-600

Qt150 ................hts 300-800

• Information on installation

training for your electrical

contractor

Visit builder.generac.com to join.

Download from Www.Somanuals.com. All Manuals Search And Download.

acceSSorieS

remote Wireless Monitor for

Air-Cooled Generators

add efficiency by allowing for remote

viewing of generator status and

parameters from inside the home.

fascia for Air-Cooled Units

complement the contoured enclosure with a fascia base wrap

that snaps together around the bottom of the generator. fits

air-cooled generators manufactured after april 2008 that have

the contoured body wrap style. fascia continues the sleek,

contoured appearance as well as offering

protection from rodents and insects by

covering the lifting holes located

Scheduled

in the base. available in grey

only. standard on

20 kw air-cooled model.

Maintenance kits

a scheduled maintenance

program will ensure that your

system is always in top operating

condition and that your warranty

requirements are met. Generac

offers a comprehensive line of

scheduled maintenance kits to ensure long life and top

performance of your generator system.

Air-Cooled Generator Transport Cart

moving a 400 lb generator can be

hard work. the Generator transport

cart will assist with moving the

generator from the truck to the

planned installation site. allows for

a single person to easily maneuver

any air-cooled product to the desired

installation location.

Cold Weather kit

the cold weather kits are

recommended for areas where the

temperature drops below 30° f.

ACCESSOrIES

Air-Cooled Remote Monitoring Options*

Model Description

Air-Cooled Cold Weather Kit

Model Description

Contents

5636

Remote wireless monitor

5634

For air-cooled units mfg prior to 4/08 Battery wrap with internal thermostat

Liquid-Cooled Remote Monitoring Options

70 kW and above

5635

For air-cooled units mfg after 4/08

Battery wrap with internal thermostat

Liquid-Cooled Cold Weather Kit

Model Description

Contents

5464

5465

5466

Remote annunciator panel with 8 relays

5629

5630

5631

5632

5633

For 1.6L engines

28” Battery warmer w/oil filter

Remote annunciator panel without LEDs

and keypad (relays only)

For 2.4L engines

28" Battery warmer, zip ties, thermostat

44" Battery warmer, zip ties, thermostat

44" Battery warmer, zip ties, thermostat & gear oil

Remote annunciator panel without relays

For 4.2L engines

Air-Cooled Scheduled Maintenance Kit

Model Description

For 3.0, 4.6, 6.8 direct drive units

For 6.8L gear drive units

5661

5662

5663

7 kW, 410 cc kit

8 kW, 410 cc kit

10 kW, 530 cc kit

Liquid-Cooled Extreme Cold Weather Kit

Model Description

Use with cold

weather kit #

Contents

12,13, 14,15, 16 kW, 17 & 18 kW,

760/990 cc kit

5664

5665

18 kW (3600 rpm), 20,

5615

Block heater & mounting hardware

5629

25, 30 kW (1.6L)

20 kW, 999 cc kit

5616

5618

5617

5619

5620

5667

25 kW (1800 rpm), 45 kW (2.4L)

5630

5631

5632

5633

5634

5635

Miscellaneous

Liquid-Cooled Scheduled Maintenance Kit

Model Description

35 & 45 kW - both 1800 RPM (4.2L) Block heater & mounting hardware

Model Description

60 kW (3.0L)

Block heater & mounting hardware

18 kW low speed aluminum, 20, 25 &

5655

5651 Base plug for all liquid-cooled models

5652 Base plug for all air-cooled models mfg prior to 4/08

5654 Grey paint kit – Units mfg prior to 4/08

5653 Tan paint kit – Units mfg prior 4/08

5703 Bisque paint kit – Units mfg after 4/08

5704 Medium grey paint kit – Units mfg after 4/08

5685 Air-cooled generator transport cart

5666 Fascia for air-cooled units mfg after 4/08

80 kW (4.6L)

30 kW steel, 3600 RPM units, 1.6L units

25 kW low speed aluminum & 45 kW

5656

70, 100, 130 kW (6.8L)

150 kW (6.8L)

steel, 3600 RPM units, 2.4L units

5657

5658

60 kW unit, 3.0L units

Load Management Options

Model Description

35 & 45 kW low speed, aluminum,

4.2L units

Contents

Use with

5239

5621

PowerMaster load shedding device

Auxiliary transfer switch contact kit

PowerMaster

60 kW & below

R-style switch

5659

5660

80 kW, 4.6L kit units

Contact, screws & washers

70, 100, 130, 150 kW, 6.8L units

* For use with 10-20 kW air-cooled generators manufactured after April 2008.

Download from Www.Somanuals.com. All Manuals Search And Download.

Product SPecificationS

TrANSfEr SWITCHES

5499

GenReady w/ EZ

Transfer Operator

RTSS200A3

Load Shedding

5447

EZ Transfer Operator

5488

GenReady

Model

RTSD100A1

RTSF100A1

RTSH100A1

RTSP100A1

RTSW100A1

Amp Rating

100

200

N/A

200/125

Number of Circuits

16 Priority

N/A

1 x 50 Amp, 2 pole

1 x 40 Amp, 2 pole

1 x 20 Amp, 2 pole

4 x 20 Amp, 1 pole

4 x 15 Amp, 1 pole

1 x 50 Amp, 2 pole

1 x 40 Amp, 2 pole

1 x 20 Amp, 2 pole

5 x 20 Amp, 1 pole

5 x 15 Amp, 1 pole

1 x 50 Amp, 2 pole

1 x 40 Amp, 2 pole

1 x 20 Amp, 2 pole

5 x 20 Amp, 1 pole

5 x 15 Amp, 1 pole

1 x 30 Amp, 2 pole

1 x 20 Amp, 2 pole

3 x 20 Amp, 1 pole

3 x 15 Amp, 1 pole

1 x 40 Amp, 2 pole

1 x 30 Amp, 2 pole

3 x 20 Amp, 1 pole

5 x 15 Amp, 1 pole

1 x 30 Amp, 2 pole

1 x 20 Amp, 1 pole

5 x 15 Amp, 1 pole

Breakers

N/A

Load Transition Type

Voltage

Open

120/240

Single

Open

120/240

Single

Open

120/240

Single

Open

120/240

Single

Open

120/240

Single

Open

120/240

Open

N/A

3.5

N/A

120/240

Single

Open

120/240

Single

Phase

Single

Enclosure Type

Dimensions (H” x W” x D”)

Weight (lbs)

NEMA 1

29.5 x 12.1 x 6.8

NEMA 1

29.5 x 12.1 x 6.8

NEMA 1

29.5 x 12.1 x 6.8

NEMA 1

29.5 x 12.1 x 6.8

NEMA 1

29.5 x 12.1 x 6.8

NEMA 1R, 3R

42.5 x 21 x 8.25

NEMA 1

42 x 15 x 4

45.5

NEMA 1

42 x 15 x 4

Model

HTSN100A

HTSN100G

100

HTSN100J

100

HTSN100K

100

HTSN150A

150

HTSN150G

150

HTSN150K

HTSN200A

HTSN200G

200

HTSN200J

200

HTSN200K

200

HTSN300A

300

HTSN300G

300

HTSN300J

HTSN300K

300

Amp Rating

Load Transition Type

Voltage

100

Open

150

Open

200

Open

300

Open

120/240

Three

Open

277/480

Three

Open

120/208

Three

Open

120/208

Three

Open

120/240

Single

120/208

Three

120/240

Single

277/480

Three

120/240

Single

120/240

Three

277/480

Three

120/240

Single

120/208

Three

120/240

Three

277/480

Three

Phase

Enclosure Type

NEMA 1/3R

Dimensions

(H” x W” x D”)

36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 48 x 30 x 12 36 x 24 x 10 36 x 24 x 10 36 x 24 x 10 48 x 30 x 12

Weight (lbs)

NEMA 1 / NEMA 3R

86 / 112

105 / 131

86 / 112

89 / 115

105 / 131

86 / 112

89 / 115

105 / 131

101 / 127

108 / 134

124 / 150

Model

HTSN400A

400

HTSN400G

HTSN400J

400

HTSN400K

400

HTSN600A

HTSN600G

600

HTSN600J

HTSN600K

HTSN800A

800

HTSN800G

HTSN800K

800

Amp Rating

Load Transition Type

Voltage

400

Open

600

Open

600

Open

600

Open

800

Open

120/240

Single

120/208

Three

120/240

Three

277/480

Three

120/240

Single

120/208

Three

120/240

Three

277/480

Three

120/240

Single

120/208

Three

277/480

Three

Phase

Enclosure Type

NEMA 1/3R

NEMA 12/3R

Dimensions

(H” x W” x D”)

36 x 24 x 10

101 / 127

N/A

36 x 24 x 10

101 / 127

N/A

36 x 24 x 10

101 / 127

N/A

48 x 30 x 12

124 / 150

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

60 x 36 x 20

N/A

Weight (lbs)

NEMA 1/ NEMA 3R

Weight (lbs)

NEMA 12/NEMA 3R

650 / 650

680 / 680

RTSN400G3

RTSN400J3

400

Model

RTSN100A3 RTSE100A3 RTSN100G3

RTSN100K3

RTSN100J3 RTSN200A3 RTSE200A3 RTSN200G3 RTSN200J3

RTSN200K3

200

RTSN400A3

400

RTSE400A3

Amp Rating

100

200

400

Open w/

Service

Open w/

Service

Open w/

Service

Load Transition Type

Open

Disconnect

Voltage

120/240

Single

120/240

Single

120/208

Three

277/480

Three

120/240

Three

120/240

Single

120/240

Single

120/208

Three

120/240

Three

277/480

Three

120/240

Single

120/240

Single

120/208

Three

120/240

Three

Phase

Enclosure Type

NEMA 3R

Dimensions

(H” x W” x D”)

20 x 15.2 x 7.3 20 x 15.2 x 7.3 24 x 20.5 x 7.3 36 x 24.5 x 10.2 24 x 20.5 x 7.3 20 x 15 x 7.3 30 x 16.5 x 7.3 24 x 20.5 x 7.3 24 x 20.5 x 7.3 48 x 30.6 x 13.3 36.1 x 24.4 x 10.2 40 x 31 x 10.5 36.1 x 24.4 x 10.2 36.1 x 24.4 x 10.2

35 52 49 95 95 35 58 49 49 105 88 134 107 107

Weight (lbs)

Download from Www.Somanuals.com. All Manuals Search And Download.

Product Speciﬁcations

air-Cooled

liquid-Cooled

Series ³

QT02224

22 kW

91.6

QT02516

25 kW

24 kW

104.2

86.8

QT02724

27 kW

25 kW

112.5

QT03016

30 kW

29 kW

120.8

104.2

N/A

QT03624

36 kW

35 kW

150

QT04524*

45 kW

187.5

QT04842*

48 kW

45 kW

200

QT06024

60 kW

250

QT07068

70 kW

68 kW

291.6

QT08046

80 kW

78 kW

333.3

QT10068*

100 kW

97 kW

QT13068

130 kW

541.6

QT15068

150 kW

625

Model

05526

8/7 kW

120/240V

33.3

05528

10/9 kW

120/240V

41.6

05530

14/13 kW

120/240V

58.3

05531

17/16 kW

120/240V

70.8

05532

17/16 kW

120/240V

70.8

05533

20/18 kW

120/240V

83.3

Rated Power (LPG/NG)

Voltage (Single-Phase)

Amps @ 240V LPG

Amps @ 240V NG

Engine/Alternator RPM

Engine

Rated Power LP

Rated Power NG

Amps @ 240V, 1 Ø LP

Amps @ 208V, 3 Ø LP

Amps @ 240V, 3 Ø LP¹

Amps @ 480V, 3 Ø LP

Engine/Alternator RPM

Engine Size

416.6

29.2

37.5

54.2

66.6

125

156.3

167

208.4

180.6

90.3

243.1

277.9

347.3

451.5

521

3600/3600

OHVI / 410cc

62 (1.68)

140

3600/3600

OHVI / 530cc

70 (1.93)

156

3600/3600

OHVI / 992cc

84 (2.30)

220

3600/3600

OHVI / 992cc

94 (2.57)

261

3600/3600

OHVI / 992cc

94 (2.57)

262

3600/3600

OHVI / 999cc

106 (2.90)

294

N/A

108

135.4

144

210.7

240.8

301

391.3

451.5

N/A

67.7

105.3

120.4

150.5

195.6

225.7

Fuel Consumption LPG

Fuel Consumption NG

Quiet-Test Low Speed Exercise

db(A) at Exercise

1800/1800

2.4L

3600/3600

1.6L

1800/1800

2.4L

3600/3600

1.6L

1800/1800

2.4L

3600/3600

2.4L

1800/1800

4.2L

3600/3600

2.4L

1800/1800

6.8L

3600/3600

4.6L

2300/1800

6.8L

3000/1800

6.8L

3600/3600

6.8L

Yes

Cylinder Arrangement

Fuel Consumption LPG

Fuel Consumption NG

Quiet-Test Low Speed Mode

db(A) at Exercise

In-line 4

120 (3.3)

316

In-line 4

175 (4.81)

437

In-line 4

149 (4.1)

359

In-line 4

209 (5.7)

525

In-line 4

199 (5.4)

480

In-line 4

286 (7.86)

720

V-6

In-line 4

332 (9.0)

862

V-10

V-8

V-10

261 (7.2)

661

411 (11.3)

1020

465 (12.78)

1154

507 (13.9)

1260

719.8 (19.56)

1786

830.6 (22.6)

2061

db(A) at Normal Operating Load

Enclosure

Steel

Aluminum

Gray

Aluminum

Gray

Enclosure Color

Bisque

Yes

Dimensions (L” x W” x H”)

Generator Weight (lbs.)

48 x 24 x 28.25 48 x 24 x 28.25 48 x 24 x 28.25 48 x 24 x 28.25 48 x 24 x 28.25 48 x 24 x 28.25

336 375 425.5 445 414 451

db(A) at Normal Operating Load

Transfer Switch Type Needed

Enclosure Material

RTS

HTS

Aluminum

Gray

Steel

Aluminum

Gray

Steel

Aluminum

Bisque

77 x 33.5 x 45

N/A

Steel

Aluminum

Gray

Steel

Steel or Alum

Tan

Steel or Alum

Tan

Steel or Alum

Tan

Steel or Alum

Tan

Steel or Alum

Tan

Enclosure Color

Bisque

62.2 x 29 x 33.5

875

Bisque

62.2 x 29 x 33.5

935

Bisque

77 x 33.5 x 45

1414/1464²

Tan

Dimensions (L” x W” x H”)

Generator Weight Steel (lbs.)

62.2 x 29 x 33.5

N/A

62.2 x 29 x 33.5

N/A

77 x 33.5 x 45

N/A

89 x 34 x 48

1650

96.5 x 37 x 48

2185

116 x 37 x 55**

2010

116 x 37 x 55**

2705/2755²

116 x 37 x 55**

2873

116 x 37 x 55**

2666

Generator Weight Aluminum (lbs.)

843

N/A

891

N/A

1683

N/A

1740/1790²

1650

2040

1836

2531/2581²

2699

2492

* California emission compliant model. Must specify with

“Y” at end of typecode when ordered.

1 Consult factory for availability

2 California emission compliant model weight

** Height does not include measurement of exhaust stack(s).

*** All specifications subject to change without notice.

3 See product selection guide to customize your generator

portable

GP15000E

GP17500E

XP4000

XP8000E

5606/5712*

8000 Watts

12000 Watts

Generac 410cc OHVI

Yes

XP10000E

Series

GP1800

5723

GP3250

5724

GP5500

5736/5737*

5500 Watts

6875 Watts

389cc OHV

GP6500

GP7000

GP7000E

5626

GP8000

GP8000E

5681

GP10000E

5739

Model #

5623/5700*

6500 Watts

8000 Watts

389cc OHV

5625

7000 Watts

8750 Watts

Generac 410cc OHVI

Yes

5680

8000 Watts

10000 Watts

Generac 410cc OHVI

Yes

5734

15000 Watts

22500 Watts

Generac 992cc OHVI

Yes

5735

5604/5713*

4000 Watts

5000 Watts

Generac 220cc OHVI

Yes

5607

10000 Watts

15000 Watts

Generac 530cc OHVI

Yes

Running Watts

Starting Watts

Engine Size and Type

Pressure Lube w/Filter

Starting Method

Battery Included

Covered Outlets

1800 Watts

2050 Watts

163cc OHV

3250 Watts

3750 Watts

206cc OHV

7000 Watts

8750 Watts

Generac 410cc OHVI

Yes

8000 Watts

10000 Watts

Generac 410cc OHVI

Yes

10000 Watts

15000 Watts

Generac 530cc OHVI

Yes

17500 Watts

26250 Watts

Generac 992cc OHVI

Yes

Electric

Yes

Recoil

Electric/Recoil

Yes

Recoil

Electric/Recoil

Yes

Electric

Recoil

Electric/Recoil

Yes

Electric

N/A

Yes

N/A

Yes

2x5-20R

GFCI 2x5-20R

2xL5-30R

1xL14-30R

1x14-50R

2x5-20R

GFCI 2x5-20R

2xL5-30R

1xL14-30R

1x14-50R

GFCI 4x5-20R

1xL5-30R

1XL14-30R

1X14-50R

GFCI 4x5-20R

1xL5-30R

1x14-50R

4x5-20R

1xL14-30R

4x5-20R

1xL14-30R

4x5-20R

1xL14-30R

4x5-20R

1xL14-30R

4x5-20R

1xL14-30R

4x5-20R

1xL14-30R

GFCI 4x5-20R

1xL14-20R

GFCI 4x5-20R

1xL14-30R

2x5-20R

4x5-20R

Outlets

1x10A 12Vdc

Hour Meter w/ Maintenance Resets

Low-Oil Shutdown

Fuel Tank Type and Size

Run Time at 50%

Low Level

Steel, 4.0 Gal

14 Hours

Low Level

Steel, 4.0 Gal

13.5 Hours

Yes

Low Level

Steel, 6.6 Gal

10 Hours

Yes

Low Level

Steel, 6.6 Gal

9 Hours

Yes

Low Pressure

Steel, 8.0 Gal

11 Hours

Yes

Low Pressure

Steel, 8.0 Gal

11 Hours

Yes

Low Pressure

Steel, 8.0 Gal

8 Hours

Yes

Low Pressure

Steel, 8.0 Gal

8 Hours

Yes

Low Pressure

Steel, 10.0 Gal

10 Hours

Yes

Low Pressure

Resin, 16.0 Gal

10 Hours

Yes

Low Pressure

Resin, 16.0 Gal

10 Hours

Yes

Low Pressure

Steel, 5.0 Gal

12 Hours

20' 20A

Yes

Low Pressure

Steel, 8.0 Gal

8 Hours

Yes

Low Pressure

Steel, 10.0 Gal

10 Hours

Cord Set Included

20’ 30A

Handles

N/A

Folding

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fixed, D-Style

Yes

Fixed, D-Style

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

Fold Down/Locking

Yes

First Oil Included

Yes

Maintenance Kit Included

Emission Certified

CSA Certified Model Availability

Warranty

50 States¹

Yes

50 States²

Yes

50 States¹

Yes

49 States

1st Quarter 2009

2 Year Limited

49 States

1st Quarter 2009

2 Year Limited

49 States

Yes

49 States

Yes

49 States

50 States

49 States

Yes

2 Year Limited

3 Year Limited

33.5 x 26.5

x 27.5

33.5 x 26.5

x 27.5

Dimensions (L” x W” x H”)

23.5 x 17 x 17.5

25.5 x 21 x 19

33.5 x 26.5 x 27.5

33.5 x 22 x 27.5

48.5 x 30.75 x 38.5

29.25 x 23.5 x 26

32.5 x 26 x 29

35 x 28 x 36

Product Weight (lbs.)

Availability

90.5

101.5

180

185

190

195

200

205

300

373

400

195

255

300

4th Quarter 2008

Available Now

2nd Quarter 2009

1st Quarter 2009

Available Now

1st Quarter 2009

* California Emission Model

All portable specifications and models subject to change. Please consult factory for availability.

¹California models available 4th Quarter 2008 ²California models available 1st Quarter 2009

Download from Www.Somanuals.com. All Manuals Search And Download.

Generac - life iS better witH Power.

Product Selection Guide

LIQUID-COOLED GENErATOrS

to build a generator and transfer switch, specify each ordering option below.

Generator voltage ratings must match transfer switch voltage.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

kW Ratings

e.g. (45 kW = 045)

Engine

e.g. (5.4L = 54)

Voltage

Fuel

Enclosure

Steel = S

Aluminum = A

Emission/

Catalytic

Converter

120/240 1ø = A

120/208 3ø = G

120/240 3ø = J

277/480 3ø = K

Natural Gas = n

Propane Vapor = V

Field Convertable

to LP = *

No Catalyst = n

¹Catalyst & A/F

Ratio = Y

100

130

150

2.4L @ 1800 RPM

1.6L @ 3600 RPM

2.4L @ 1800 RPM

1.6L @ 3600 RPM

2.4L @ 1800 RPM

2.4L @ 3600 RPM

4.2L @ 1800 RPM

2.4L @ 3600 RPM

A,G,J

n, V

S, A

n/A

n, Y

ALL

MODELS

bEGin

A, G, J, K

WiTH QT

6.8L @ 3600 RPM

4.6L @ 3600 RPM

6.8L @ 2300 RPM Gear Drive

6.8L @ 3000 RPM Gear Drive

6.8L @ 3600 RPM

SAMPLE

Q T

0 6 0

2 4

Q T

MODEL nuMbER (Enter on Order Form)

1 = Catalyst & A/F Ratio may not be available for all models. Contact Your Generac representative for more information.

TrANSfEr SWITCHES

STEP 1

Selection Criteria Transfer Switch

STEP 2

STEP 3

Amp Rating

e.g. (200 Amp = 200) 120/240 1ø = A

120/208 3ø = G

STEP 4

Voltage

STEP 5

Switch Type

Normal = n

Enclosure Type^3,4

NEMA 1 = 1

R Controller = RTS

H-100 Controller = HTS Service Entrance Rated¹= E

NEMA 3R = 3

NEMA 12 = 4

Load Shedding²= S

8 cct. Integrated Load Center²= D

10 cct. Integrated Load Center²= F

12 cct. Integrated Load Center²= H

14 cct. Integrated Load Center²= P

16 cct. Integrated Load Center²= W

16 cct. Priority Load Center,

120/240 3ø = J

277/480 3ø = K

Load Shedding³= S

For Standby

Generators

8 - 60 kW

RTS

n, E, D, F, H, P, W, S

100, 200, 400

A, G, J, K

1, 3

For Standby

Generators

70 - 150 kW

HTS

100, 150, 200,

400, 600, 800

A, G, J, K

1, 3, 4

2 0 0

R T S

SAMPLE

PRODuCT nuMbER

(Enter on Order Form)

1 = 120/240 1ø, NEMA 3R Only

2 = 200 Amp service entrance rated NEMA 3R

3 = HTS 100 - 400 Amp NEMA 1/3R Only

4 = HTS 600 - 800 Amp NEMA 12/3R Only

Download from Www.Somanuals.com. All Manuals Search And Download.

Generac - life iS better witH Power.

Generac – a Powerful History

A TrADITION Of QUALITy AND INNOvATION

for almost 50 years, Generac power systems has led the industry with

innovative design and superior manufacturing. when it comes to

developing products that are both durable and reliable, we stand head and

shoulders above our competition. that’s because our sole focus has been,

and continues to be, standby power. the result of our efforts can be seen in

every inch of our product offerings.

our vertical integration allows us to control the quality, availability and

flow of materials throughout the manufacturing process. we design and

build our own air-cooled engines, alternators, control systems, automatic

transfer switches, enclosures and base tanks (for diesel and bi-fuel™

models). our products are fully integrated as complete power systems and

each genset is factory tested prior to shipment.

because of our ongoing commitment to quality and innovation, Generac is

the name that home and business owners have

come to trust.

COMMITMENT TO SErvICE

Generac is committed to providing our customers with unsurpassed after-

the-sale service support. our nationwide dealer network has factory trained

technicians on staff and maintains large inventories of Generac parts,

components and accessories.

our state-of-the-art training center ensures that Generac service

technicians are always up to date on new product innovations and

improvements. technicians receive comprehensive technical training and

extensive hands-on experience in the installation, repair and maintenance

of Generac products.

Generac’s commitment to service includes scheduled maintenance

programs, warranty assistance and emergency service to ensure that

Generac customers are never left in the dark.

Download from Www.Somanuals.com. All Manuals Search And Download.

Generac power systems, inc.

highway 59 & hillside rd.

p.o. box 8

waukesha, wi 53187

1-888-Generac

MyGenerac.com

specifications are subject to change without notice.

bulletin 0170030sby / printed in usa 04.04, rev. 11.08

Download from Www.Somanuals.com. All Manuals Search And Download.

Escali Scale Plena User Manual
Euro Pro Vacuum Cleaner NV70 User Manual
Fisher Price Bicycle 72639 User Manual
Fisher Price Crib Toy N1128N1128 User Manual
GE Cordless Telephone 16197920 User Manual
GE Griddle 168999 User Manual
GE Washer Dryer WBXR1090 User Manual
GE Washer Dryer WCXH208 WCXH214 WSXH208 WPXH214 User Manual
Gianni Industries Door PBT 015 User Manual
Giant Water Pump GP7145GB User Manual