®
1:10 Splitter for
HDMI® 1.3
EXT-HDMI1.3-1410-SIL
EXT-HDMI1.3-1410-BLK
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
2
3
4
5
6
7
9
Introduction
Operation Notes
Features
Panel Layout
Panel Descriptions
Connecting And Operating The 1:10 Splitter For HDMI 1.3
EDID Management
Specifications
10 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the 1:10 Splitter For HDMI 1.3. Your
complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 1:10 Splitter For HDMI 1.3
The Gefen 1:10 Splitter For HDMI 1.3 allows set-top boxes, DVD players, and
other HDTV devices to be connected to up to ten HDTV displays. When two or
more Splitters are connected together, they can be used to create a larger video
signal distribution.
This new unit supports HDMI 1.3 features and passes the higher bandwidth
HDMI 1.3 signal for the ultimate in state-of-the-art HDMI signal duplication.
How It Works
The HDMI 1:10 Splitter is connected using an HDMI cable from the HDMI video
source to the HDMI splitter input. There are ten HDMI outputs. Each output is
connected to an HDMI display. Power is connected and all connected displays
show an exact replica of the video signal that is input to the Splitter.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:10 SPLITTER FOR HDMI 1.3
•
By default, display information from the display connected to HDMI output port
1 is sent back to the source. Therefore, the other displays connected to the 1:10
Splitter For HDMI 1.3 must be capable of accepting the timings, resolutions
and audio formats of the display that is connected to HDMI output port 1. It is
recommended that the display with the lowest native resolution be connected
to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID
programmed into the 1:10 Splitter For HDMI 1.3 that can be used instead. See
page 7 for more details.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
HDMI 1.3 Features
•
•
•
•
•
225 MHz (up to 12 bit YUV 444 supported @ 1080p)
Deep Color
Color Space Conversion
Dolby TrueHD and DTS-HD Master Audio
Lip-Sync
Features
•
Simultaneously displays a single Hi-Def source on up to ten (10) HDTV
displays without signal loss
•
•
•
•
•
Maintains sharp HDTV resolutions up to 1080p Full HD and 2K
3DTV Pass-Through
EDID Management for rapid integration of sources and display devices.
Mono-LOK™ Locking HDMI Connectors
Supports the use of DVI sources and DVI displays with an HDMI-to-DVI
converter cable or adapter
•
HDMI and HDCP compliant
Package Includes
(1) Gefen 1:10 Splitter For HDMI 1.3
(1) 6 ft HDMI cable (M-M)
(1) 5V DC Power Supply
(1) User Manual
(1) Rack Ears
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS
1
Reset Button
This button will cycle power on the 1:10 Splitter For HDMI 1.3. If the EDID mode
has been changed it will not take effect until the unit has been reset.
2
3
Activity Indicator
This LED indicator will turn bright blue when an input signal is detected.
Power Indicator
This LED indicator will become active once the included 5V DC power adapter
has been properly connected.
4
5
EDID Selection Switch
Switches between the built-in Internal EDID and External (Pass-Through) EDID.
HDMI Input Port
Connect an HDMI or DVI (with a DVI to HDMI adaptor or cable) source device
to this input port.
6
7
HDMI Output Ports 1 - 10
Connect up to 10 HDMI or DVI (with a HDMI to DVI adapter or cable) displays to
these output ports. The display connected to the port labeled OUT 1 will have its
EDID used when the external mode is active.
24V DC Power Input
Connect the included 24V DC power supply to this port.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AND OPERATING THE 1:10 SPLITTER FOR HDMI 1.3
How to Connect the 1:10 Splitter For HDMI 1.3
1. Connect the HDMI or DVI (with a DVI to HDMI adapter or cable) source
device to the 1:10 Splitter For HDMI 1.3 HDMI input port using the supplied
HDMI cable.
2. Connect up to ten HDMI or DVI (with a HDMI to DVI adapter or cable)
displays to the 1:10 Splitter For HDMI 1.3 output ports using user supplied
HDMI cables.
3. Connect the included 5V DC power adapter to the 1:10 Splitter For HDMI 1.3
power input port.
4. Power on the displays first and then the source.
Wiring Diagram for the Gefen 1:10 Splitter for HDMI 1.3
HDMI CABLE
HDMI Source
HDMI Splitter
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
EXT-HDMI1.3-1410-SIL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EDID MANAGEMENT
EDID Mode Selection
1. EXTERNAL MODE:
To use this mode, move the EDID switch to the Ext position. See page 8 for
details on using the External EDID.
2. INTERNAL MODE:
To use this mode, move the EDID switch to the Int position. This mode
will use a preset EDID, from the factory, that is stored in the Gefen 1:10
Splitter For HDMI 1.3. This pre-programmed standard EDID data structure is
compatible with most A/V display devices. All resolutions and audio formats
specified in this EDID will be passed to the source device. See the tables
below for a complete listing of the resolutions and audio formats listed in this
EDID.
NOTE: All other HDMI devices/displays connected to the output ports must
be compatible with at least one resolution/audio format specified in this
EDID. It is recommended to set, on the source device, a common resolution
and audio format shared by all attached devices/displays. This is to ensure a
compatible signal is output to all connected devices/displays.
Internal EDID Video Timings
Timing
Refresh Rate
50 Hz
Timing
Refresh Rate
50 Hz
1280 x 720p
1280 x 720p
1920 x 1080i
1920 x 1080i*
720 x 480p
720 x 576p
59.94 / 60 Hz
50 Hz
1920 x 1080p
1920 x 1080p
1440 x 480p
1440 x 576p
50 Hz
59.94 / 60 Hz
59.94 / 60 Hz
50 Hz
59.94 / 60 Hz
59.94 / 60 Hz
* Native Resolution
Internal EDID Audio Formats
Audio Format
LPCM
Supported Channels
2CH
AC-3
2CH / 5.1CH
2CH / 5.1CH
DTS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EDID MANAGEMENT
External EDID Management
The 1:10 Splitter For HDMI 1.3 features EDID Management. Before the source
can send video or audio signals, the source device reads the EDID (Extended
Display Identification Data) from the output devices connected to the Splitter.
The EDID contains information about what type of A/V data that the source can
send to each output device.
The 1:10 Splitter For HDMI 1.3 distributes a single source to multiple output
devices. This involves reading EDID data from more than one device.
Management of the EDID data is important to maintain compatibility between all
devices.
The following EDID features are copied from Output 1:
•
•
•
Supported Resolutions
3D Support
Audio Features
EDID color features are built based on all attached displays, using the
following rules:
•
Deep Color will be enabled if one or more displays that are connected to the
Splitter support Deep Color.
•
xvYCC (x.v.Color) is disabled if one of more displays do not support xvYCC.
Display Connections:
•
If a display is not connected to Output 1, then no EDID changes are made,
meaning that the previous EDID information will be used. This state will be
in effect until a display is connected to Output 1 and the Splitter is power-
cycled.
•
EDID is built from Output 1 to the Input. The audio block will be copied
from Output 1. EDID-copying is performed only when the Splitter is reset or
power-cycled.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Amplifier Bandwidth ....................................................................... 225 MHz
Input Video Signal .............................................................................. 1.2 Volts p-p
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)
Supported Resolutions ....................................................... 1080p, 1920x1200, 2K
HDMI Connector ................................................................ Type A ,19 Pin Female
Power Consumption ....................................................................... 60 Watts (max)
Power Supply ............................................................................................ 24V DC
Dimensions ...................................................................... 17”W x 1.75”H x 5.5”D
Shipping Weight ............................................................................................ 8 lbs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page
under the Support section of the Gefen Web site.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev A2
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax: 818-772-9120
Pb
This product uses UL listed power supplies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|