Gamber Johnson Laptop Docking Station 7160 0393 00 P User Manual

INSTALLATION INSTRUCTIONS  
Product  
7160-0393  
Revision  
Form  
INST-571  
Rev .B  
Printing Spec: PS-001  
CF53 DOCKING STATION  
This instruction sheet is for the CF53 docking station only. For instructions on  
features, set-up, and operation of the CF53 computer, please refer to the manual  
provided by Panasonic with the computer.  
This docking station is designed to be used with a variety of Gamber-Johnson  
mounting systems. Installation instructions for other Gamber-Johnson products  
are provided with each individual product.  
This instruction sheet is for the following products:  
Item No. 7160-0393-00(-P) No RF (External Power Supply sold separately)  
Item No. 7160-0393-02(-P) Dual RF (External Power Supply sold separately)  
Item No. 7160-0393-04(-P) No RF with Internal Power Supply  
Item No. 7160-0393-06(-P) Dual RF with Internal Power Supply  
Product Mounting Disclaimer  
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage  
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson  
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is  
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications  
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.  
© Copyright 2012 Gamber-Johnson, LLC  
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CF-53 DOCKING STATION FEATURE IDENTIFICATON  
Rear Hook  
Dual RF Module  
Docking  
Connector  
Alignment Pin  
LED Power Switch  
Note: Panasonic does not  
recommend hot-docking the CF-53  
computer. The power switch allows  
the user to switch off vehicle power  
so they can dock or undock the  
computer without hot-docking.  
Latch  
Front Hook  
WLAN  
WWAN  
12Vdc Input  
Vehicle Power  
15 Vdc  
Power  
Ethernet  
Video  
(3X) USB 2.0  
HDMI  
Serial  
USB 3.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Isolator  
Isolator Mounting Plate  
1/4-20 threaded inserts for  
attaching to Gamber-Johnson  
mounting equipment  
Mounting Standoffs  
for Optional External  
Mounted Power Supply  
Cable Restraint Bracket  
Wire Ties Secure the cable  
connection to the docking station  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING VEHICLE POWER TO A CF-53 DOCKING  
STATION WITH AN INTERNAL POWER SUPPLY  
Connect Vehicle Power to the Red wire with a 10 Amp in-line fuse.  
Connect Vehicle Ground to the Black wire.  
CONNECTING VEHICLE POWER TO A CF-53 DOCKING  
STATION WITH AN EXTERNAL POWER SUPPLY  
Lind Electronics  
Power Supply  
with integrated  
10 Amp Fuse  
Connect to  
12Vdc Vehicle  
Power  
15 Vdc Output Power - The plug will need to be cut off so the  
internal Red and Black wires can be attached to the Red and Black  
wires on the dock. This will enable the power switch to be  
used with the external power supply.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCKING THE COMPUTER  
1. Make sure the dock power switch is  
in the OFF position and the LED is not  
lit.  
2. Push the Latch Button to open the  
latch if the dock is in the closed  
position.  
3. Insert the front of the CF-53  
computer under the front hooks on the  
dock. Look at the handle to make  
sure the front of the computer is  
centered on the front hooks.  
4. Lower the back of the computer  
down onto the guide pins and the  
docking connector.  
Dock Power Switch  
5. Lightly press down on the back of  
the computer to ensure if is fully  
seated.  
6. Close the latch to engage the rear  
hooks (and Dual-RF if applicable) into  
the back of the computer to hold it in  
place.  
7. Turn ON the power switch to allow  
vehicle power to the computer.  
Latch Button  
TO UNDOCK THE COMPUTER  
1. Turn off the Dock Power Switch.  
2. Press the Latch Button. The front  
latch is spring loaded and will  
automatically open. The rear hooks are  
also spring loaded and will retract from  
the computer.  
3. Lift the back of the computer off the  
guide pins and docking connector.  
4. Pull the front of the computer out  
from under the front hooks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Stereo Amplifier PE15 User Manual
Estate Refrigerator 2315225 User Manual
Extron electronic Switch WPB 109 User Manual
First Alert Home Security System DWB 700 User Manual
Fisher Price Model Vehicle w1461 User Manual
Fluke Thermometer 1529 Chub E4 User Manual
FujiFilm Film Camera 5010024 User Manual
Furuno Radar Detector CI 80 User Manual
GE Ventilation Hood BF120 User Manual
Gigabyte Network Card GS SR125EDL User Manual