BLender
model number: 169119
uPC: 681131691192
Customer assistance
1-877-207-0923 (us)
1-877-556-0973 (Canada)
Thank you for purchasing a Ge small appliance.
in keeping with the Ge ecomagination initiative, please consider the option to
recycle the packaging material and donate the appliance you are no longer using.
to read about Ge’s ecomagination commitment, visit
Download from Www.Somanuals.com. All Manuals Search And Download.
this appliance has a 3-prong grounding type plug to reduce the risk of electric
shock. if the power-supply cord is a grounding-type 3-wire cord with a grounding
prong on the plug, the extension cord should also be a grounding-type 3-wire
cord.
Grounding instructions
this appliance must be grounded while in use to protect the operator from
electrical shock. the appliance is equipped with a 3-conductor cord and a 3-prong
grounding-type plug to fit the proper grounding-type receptacle.
PArts
1. measuring cup
2. Lid
3. Glass jar
4. Blade
5. Base
6. Control Panel
7. sealing ring
8. Blade base
9. Blade locking ring
10. stainless jar collar
3
Download from Www.Somanuals.com. All Manuals Search And Download.
oPerAtinG instruCtions
the blender can be sued for pureeing and for blending. if necessary, cut solid
ingredients into smaller pieces before you put them in the blender.
For your safety, always read and understand this instruction manual before
attempting to use any electric appliance.
Before using:
1. Carefully unpack the blender. remove all packaging materials.
2. Wash the lid, measuring cap, blade assembly, and glass jar in hot soapy water.
Dry thoroughly.
3. Wipe exterior surfaces of the base with a soft, moist cloth to remove residue
that may have collected during packing and handling. Dry thoroughly. Do not
use abrasive cleaners. never immerse tHe BLenDer, CorD or PLuG in WAter
or AnY otHer LiQuiD.
Blade assembly:
1. Line up the two round indentions on the metal jar collar with the to round
bumps on the glass blending jar.
2. Place the silicone sealing ring on the bottom of the glass jar.
3. Angle the blade assembly so one of the taller blades goes into the glass jar.
slowly lower the blade assembly so that the other blades enter the glass jar and
the blade assembly sits flat on top of the silicone sealing ring.
4. Place the black locking ring around the blade assembly and rotate the black
locking ring clockwise until it is tightened.
note: if you notice liquid leaking from the bottom of the glass blending jar, remove
the black locking ring and re-tighten it.
this blender is equipped with cord storage located on the bottom of the appliance.
Blending:
1. Add ingredients to the blending jar.
2. Place lid on blending jar. make sure the metal jar collar is properly seated on the
die cast base.
3. Plug the power cord into a wall outlet. the LCD will read power “on” indicating
the blender is ready for operation.
4. to stop blending, Press the “stoP” button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips:
1. the opening in the lid can be used to add ingredients. to do so, remove the
measuring cap from the lid.
2. it may be necessary to switch off the appliance from time to time to remove
pieces of food stick to the inside of the blender jar.
—switch off the appliance and unplug it.
—remove the lid.
—remove pieces sticking to the inside of the glass with a soft spatula.
Keep the spatula at a distance from the blade.
3. When finished blending, unplug the appliance and remove the glass jar.
CLeAninG AnD storAGe
To Clean:
1. Before cleaning, be sure the cord is unplugged from the outlet.
2. to make cleaning easier, rinse the center measuring cup and jar lid immediately
after use. Do not immerse the base in water or any liquid. if washing the jar by
hand, wash in warm soapy water. rinse and dry thoroughly. if necessary, use a
nylon bristle brush to clean the glass jar.
3. Do not use scouring pads or harsh chemicals on any plastic or metal parts.
4. Do not fill the jar with boiling water. Do not place any parts in boiling water.
5. remove the cast metal jar collar off the glass blending jar.
the glass jar is dishwasher safe. it is recommended to clean all other parts of the
blade assembly by hand with warm, soapy water and dry with a towel or allow to
air dry. use caution when washing and cleaning the blade assembly as the blades
are sharp.
To store:
Be sure all parts are clean and dry before storing. store appliance in its box or in a
clean, dry place. never wrap cord tightly around the appliance; keep it loosely
coiled or use the cord storage on the bottom of the blender.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer AssistAnCe
For faster service, please have the model number and product name ready for the
operator to assist you. this number can be found on the bottom of your appliance and
on the front page of this manual.
model number: ____________________ Product name:_________________________
Customer Assistance number 1-877-207-0923 (u.s.) or 1-877-556-0973 (Canada)
Keep these numbers for future reference!
How does state law relate to this
Two-Year LimiTed warranTY
warranty?
what does your warranty cover?
• this warranty gives you specific legal
rights, and you may also have other
rights which vary from state to state
or province to province.
• Any defect in material or workmanship.
For how long after the original purchase?
• two years.
• this warranty is in lieu of any other
warranty or condition, whether express
or implied, written or oral, including,
without limitation, any statutory
warranty or condition of merchantability
or fitness for a particular purpose.
what will we do?
• Provide you with a new one.
• For those items still under warranty but
no longer available, WAL-mArt reserves
the right to replace with a similar Ge
branded product of equal or greater value.
• WAL-mArt, Ge and the product
manufacturer expressly disclaim all
responsibility for special, incidental and
consequential damages or losses caused
by use of this appliance. Any liability is
expressly limited to an amount equal to
the purchase price paid whether a claim,
however instituted, is based on contract,
indemnity, warranty, tort (including
negligence), strict liability, or otherwise.
some states or provinces do not allow
this exclusion or limitation of incidental
or consequential losses so the foregoing
disclaimer may not apply to you.
How do you make a warranty claim?
• save your receipt.
• Properly pack your unit. We recommend
using the original carton and packing
materials.
• return the product to your nearest
WAL-mArt store or call Customer
Assistance at 1-877-207-0923 (u.s.)
or 1-877-556-0973 (Canada).
what does your warranty not cover?
• Parts subject to wear, including, without
limitation, glass parts, glass containers,
cutter/strainer, blades, seals, gaskets,
clutches, motor brushes, and/or
agitators, etc.
• Commercial use or any other use not
found in printed directions.
• Damage from misuse, abuse, or neglect,
including failure to clean product
regularly in accordance with
what if you encounter a problem with
this product while using it outside the
country of purchase?
• the warranty is valid only in the country
of purchase and you follow the warranty
claim procedure as noted.
manufacturer’s instructions.
marketed in Canada by:
Wal-mart Canada Corp.
1940 Argentia road, mississauga, ontario L5n1P9
is a trademark of General electric
Company and is used under the
license by Wal-mart stores inc.,
Bentonville, Ar 72716
Download from Www.Somanuals.com. All Manuals Search And Download.
|