FURUNO DEEPSEA WORLD
20” High resolution Multi-color LCD
MARINE RADAR
WITH ARPA AND AIS DISPLAY
Models FAR-2117/2127/2137S
■ Advanced signal processing for
■ Automatic plotting/tracking of 100
targets manually or automatically
acquired
improved detection in rough sea
■ LCD display providing crisp radar
images
■ Easy operation by customizable
function keys, trackball/wheel palm
module and rotary controls
■ Designed to comply with SOLAS
carriage requirements for ships
below 10,000 GT
■ Low spurious magnetrons meeting
ITU-R unwanted emission standards
■ Up to four radars can be
interswitched in the network without ■ Displays 1000 AIS-equipped targets
an extra device
Catalogue No. R-184c
R
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
TRADE MARK REGISTERED
Download from Www.Somanuals.com. All Manuals Search And Download.
MARCA REGISTRADA
ty and user interface
nce
Radar System 2
Radar System 1
Independent
Antenna Unit
Antenna Unit
Display
Unit
Display
Unit
Interswitch
Interswitch
Antenna Unit
Antenna Unit
Display
Unit
Display
Unit
100 Base-TX
Other Radar Images
Chart Information
COG, SOG, STW, etc.
Repeater
Antenna Unit
Antenna Unit
The radars can be connected to an Ethernet network for a variety of user
requirements. SOLAS Chapter V as amended requires X- and S-band radars
for ships 3000 GT and over. Each of X- and S-band radars can be
interswitched without using an extra option. Up to four radars can be
interchanged in the network. In addition, the essential navigational information
including the electronic chart, L/L, COG, SOG, STW, etc. can be shared in
the network.
Display
Unit
Display
Unit
The revolutionary FAR-21x7 series of X- and S-band
radars are the result of FURUNO’s 50 years of experience
in marine electronics and advanced computer technology.
This series is designed to meet the exacting standards of
the International Maritime Organization (IMO) below
10,000 GT.
Target detection is enhanced by sophisticated signal
processing techniques. Two guard zones can be set at
required ranges in any sector. Other ship’s movements
are assessed by advanced target tracking software and
alerted by CPA/TCPA data readouts. The FAR-21x7
series can display AIS-equipped ships, when connected
with an AIS transponder.
The display unit employs a 20” LCD which provides
an effective picture diameter of larger than 250 mm.
The SXGA monitor provides crisp radar images, which
are presented in a selectable color with a day and night
background color for easy observation in all lighting
conditions. Different colors are assigned for marks,
symbols and texts for user-friendly operations.
The radar antenna is available with 4, 6.5, or 8 feet
radiator.For the X-band, the rotation speed is selectable
from 24 rpm for standard radars or 42 rpm for HSC.
The S-band radar is also available with the antenna
radiator of 10 or 12 feet. The S-band radar assures target
detection in adverse weather where an X-band is heavily
affected by sea or rain clutter.
Download from Www.Somanuals.com. All Manuals Search And Download.
OS data cell
Water temp,
Depth,
Wind
DATA Cell 1
Tracking data
Magnify
DATA Cell 2
Tracking data
DATA Cell 3
AIS
Information
Targets
automatically
acquired
AIS-equipped
target selected
for data reading.
DATA DISPLAY
AIS information
A variety of navigational information, own ship status, radar plotting
data, wind, water temperature and information from other shipborne
sensors are displayed on the cells. These selected targets are
marked with a square symbol on the radar display. Magnify is
a special feature of the FURUNO radars FAR-21x7 series. This looks
like a delayed-sweep zoom that the IMO strictly prohibits, but where
the Administration accepts, the Magnify feature enlarges part of radar
display for some special maritime activity.
■ Static Data
MMSI (Maritime Mobile Service Identity)
IMO number (Where available)
Call sign & name
Length and beam
Type of ship
Location of position-fixing antenna on
the ship
■ Voyage related data
Ship’s draught
TARGET ASSOCIATION (Fusion)
Hazardous cargo (type)
Destination and ETA (at masters discretion)
■ Dynamic data
An AIS-equipped ship may be displayed by both AIS and ARPA
symbols. This is because the AIS position is measured by a GPS
in L/L while the ARPA target blip and data are measured by range
and bearing from own ship and located on the radar PPI.
When the symbols are within an operator-set criteria, the ARPA
symbol is merged in the AIS symbol. The criteria are determined
by the differences in range, bearing, course, speed, etc.
Ship’s position with accuracy
indication and integrity status
UTC
Course over ground (COG)
Speed over ground (SOG)
Heading
Navigation status (manual input)
Rate of turn (where available)
Update rates Dependent on speed and
course alternation (2 s – 3 min)
■ Short safety-related messages
Free messages
MARKS AND SYMBOLS
FOR ARPA AND AIS
Download from Www.Somanuals.com. All Manuals Search And Download.
X-band antenna for FAR-2117, 2127
Performance Monitor
built in
8 ft antenna
(4 or 6.5 ft also available)
S-band antenna for FAR-2137S
FAR-2117
FAR-2127
FAR-2137S
X-band, 12 kW, TR up
X-band, 25 kW, TR up
S-band, 30 kW, TR up
Performance Monitor
built in
GUARD ZONES
Automatic Acquisition Zone
Two automatic acquisition zones may be set in a sector or any form. They also
act as suppression zones, avoiding unnecessary overloading to the processor
and clutter by disabling automatic acquisition and tracking outside them. Targets
in a automatic acquisition zone appear as inverse triangle. The operator can
manually acquire important targets without restriction.
CPA Alarm Zone
Target tracking symbol changes to a triangle when its predicted course (vector)
violates the operator set CPA/TCPA. The operator can readily change the vector
lengths to evaluate target movement trend.
Guard Zones and Anchor Watch Zone
Guard Zones generate visual and audible alarms when targets enter the operator
set zones. One of Guard Zones may be used as an anchor watch to alert
the operator when own ship or targets drift away from the set zone.
Guard Zones
TARGET TRAILS
The target trails feature generates monotone or gradual shading afterglow
on all objects on the display. The shading afterglow paints the display just like
on an analog PPI. The monotone trails are useful to show own ship movement
and other ship tracks in a specific fishing operation. The trail time is adjustable
for 15, 30 s, 1, 3, 6, 15, 30 min or continuous. The target trails are indicated
in a different color from background. The unique feature in this radar is
a choice of True or Relative mode in Relative Motion (only True in TM).
NIGHT VIEW
RADAR MAP
Map Marks
Map Lines
Up to 200 waypoints and up to 30 routes can be stored. Each
route may contain up to 30 waypoints. A radar map is a
combination of map lines and marks whereby the user can define
and input the navigation area, route planning and monitoring
data. The radar map has the capacity of 3,000 points for lines
and marks. The map data can be memorized to facilitate
repeated use on a routine navigation area.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications of FAR-2117/2127/2137S
8. Parallel index lines
Antenna Radiators
1, 2, 3 or 6 lines (menu selectable)
1. Type
Slotted waveguide array
9. Radar map
2. Beamwidth and sidelobe attenuation
20,000 points to create coastlines, own ship safety contour,
isolated underwater dangers, buoys, traffic routing systems,
prohibited areas, fairways as required by IMO.
X-Band
S-Band
Radiator Type
Length
XN-12AF XN-20AF XN-24AF SN-30AF SN-36AF
4 ft
6.5 ft
1.23°
20°
8 ft
0.95°
20°
10 ft
12 ft
1.8°
Automatic Plotting
1. Acquisition
Beamwidth(H)
Beamwidth(W)
Sidelobe (within ± 10°)
1.9°
20°
2.3°
25°
25°
-24 dB
-28 dB
-28 dB
-24 dB
-24 dB
100 targets (e.g. manually 50, automatically 50)
Sidelobe (outside ± 10°) -30 dB
-32 dB
-32 dB
-30 dB
-30 dB
2. Tracking
S-band 10 ft radiator usable for an HSC
S-Band
Automatic tracking of all acquired targets in 0.1 to 32 nm
3. Rotation
3. Guard zone
X-Band
Two zones, one of them 0.5 nm depth
Rotation
24 rpm
RSB-096
42 rpm
21/26 rpm
RSB-098
RSB-099
45 rpm
4. Vector
Gear Box
RSB-097
RSB-100
RSB-101
RSB-102
True or relative 30 s, 1, 3, 6, 12, 15, 30 min for prediction of
target motion
5. Past positions
5 or 10 past positions at intervals of 30 s,1, 2, 3, 6 min.
RF Transceiver
1. Frequency
6. Collision warning
CPA limit: 0.2 - 10 nm, TCPA limit: 0 - 99 min.
X-band:
S-band:
9410 MHz ± 30 MHz
3050 MHz ± 30 MHz
7. Trial maneuver
Dynamic or static, with selected delay time.
2. Output power
AIS Display (Data input from AIS is required)
1. Symbols
FAR-2117
12 kW
FAR-2127
25 kW
RTR-079
FAR-2137S
30 kW
Output Power
Transceiver
Sleeping, Activated, Dangerous, Selected, Lost targets
RTR-078
RTR-080
2. Number of targets
1,000 targets max.
3. Pulselength/PRR
Range scale (nm) Pulselength (µs)
3. Data indication
PRR (Hz)
3000
3000
3000, 1500
3000, 1500, 1000
1500, 1000, 600
1000, 600
600
Basic and expanded data
0.125, 0.25
0.5
0.07
0.07, 0.15
Power Supply (specify when ordering)
0.75, 1.5
3
6
12, 24
48, 96
0.07, 0.15, 0.3
0.15, 0.3, 0.5, 0.7
0.3, 0.5, 0.7, 1.2
0.5, 0.7, 1.2
1.2
1. Processor Unit
24 VDC or 115/230 VAC, 1ø, 50/60 Hz,
7.6 A (FAR-2117: 24 rpm at 24 VDC),
8.8 A (FAR-2127: 24 rpm at 24 VDC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
4. I.F.
5. Bandwidth
60 MHz, Logarithmic
2. Display Unit
Short pulse:
Middle pulse:
Long pulse:
40 MHz
10 MHz
3 MHz
24 VDC or 115/230 VAC, 1ø, 50/60 Hz, 2.3 A (24 VDC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
3. Antenna Unit
Radar Display
FAR-2137S:
1. Display
230 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz; 440 VAC, 3ø, 60 Hz
115 VAC, 3ø, 60 Hz with optional transformer RU-5693
230 VAC, 3ø, 50 Hz with optional transformer RU-6522
440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
20.1" color LCD (SXGA 1280 x 1024 pixels),
400 (H) x 320 (V) mm,
Effective display diameter: 308 mm
Echo Color: Yellow, green or white in 32 levels
2. Range scales and ring intervals (nm)
Range: .125, .25, .5, .75, 1.5, 3, 6, 12, 24, 48, 96
Ring: .025, .05, .1, .25, .25, .5, 1, 2, 4, 8, 16
This series of radar comply with the following IMO and
IEC standards:
3. Minimum range
■ IEC 60936-1 shipborne radar
■ IEC 60936-2 HSC radar
■ IEC 60872-1 ARPA
30* m on 0.75 nm range scale
*Using a 10 m2 test target at 3.5 m high above sea and
antenna at 15 m high (IEC 60936-1). Different conditions give
a different result, maybe close to 20 m in actual installations.
■ IEC 60872-2 ATA
4. Range discrimination
■ IEC 601993-2 AIS
30 m on 0.75* nm range scale
■ IEC 61162-1 ed 2
5. Range ring accuracy
■ IEC 60945 General requirements
■ IMO MSC.64(67) Annex 4
■ IMO A.823(19)
+0.2 %
6. Presentation modes
Head-Up, Course-Up, North-Up, North-Up TM
7. Heading information
■ IMO MSC.74(69) Annex 3
Furuno GPS compass is a recommendable heading sensor as
a backup of a gyrocompass.
Confirm with your Administrations.
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT LIST
Standard
1. Display Unit MU-201CR
2. Processor Unit RPU-013
3. Full-keyboard Control Unit RCU-014
Trackball Control Unit (Palm Control Unit) RCU-015 (Specify when ordering)
4. Antenna Unit with cable, 15/20/30/50/100 m (Specify when ordering)
5. Power Supply unit PSU-007 for FAR-2137S
6. Standard Spare Parts and Installation Materials
Option
1. Performance Monitor PM-31 for FAR-2117/27
PM-51 for FAR-2137S (Specify when ordering)
2. Remote Control Unit RCU-016
3. Gyro Interface GC-10 (built in Processor Unit)
4. DVI-Analog RGB Conversion Kit (Buffer board built in) OP-03-180
5. RGB Connector DSUB-BNC-1 (for VDR)
6. Card Interface Unit CU-100
7. Transformer RU-1803/5466-1/5693/6522
8. Rectifier RU-3424/1746B
9. Junction Box RJB-001
10. Antenna Cable RW-9600
11. External Alert Buzzer OP03-21
12. Hand Grip FP03-09840
13. Bracket FP03-09820
14. Hub HUB-100
INTERCONNECTION DIAGRAM
Antenna Unit
(Specify when ordering)
For FAR-2137S
For FAR-2117/2127
Performance Monitor
Performance Monitor
PM-31
PM-51
RW-9600, 15 m
Junction Box RJB-001
RW-9600
15/20/30/50/100 m
DPYCY x 3 (DPYCY-6 x 2 + TPYCY-2.5) +
TTYCY-4 + RG-12/U, 70 - 270 m
Junction Box RJB-001
RW-9600, 15 m
GP-90
SDME (STW for ARPA)
(Position, SOG, COG)
IEC 61162-1
250V-TTYC-1
Display Unit
MU-201CR
5 m
Processor
Unit
RPU-013
IEC 61162-1
250V-TTYC-4
AIS FA-100
ECDIS
INS
RW-4846
250V-DPYCY-1.5
Power Supply Unit
PSU-007
RGB Connector
D-Sub-BNC-1
VDR
Full-keyboard
Control Unit
RCU-014
DVI-Analog RGB
Convirsion Kit
Remote Control Unit
RCU-016
DVI out
IEC 61162-1
250V-MPYC-7
Gyro Interface
GC-10
10/20/30 m
Gyro Compass
GPS Compass
Gyro Converter
AD-100
03S-9610
10/20/30 m
10/20/30 m
250V-TTYC-1
External Alarm
Ethernet
100Base-TX
HUB
Trackball Control Unit
RCU-015
FAR-28x7
Card Interface Unit
CU-100
115 VAC, 3 , 60 Hz*
230 VAC, 3 , 50 Hz*
230 VAC, 3 , 60 Hz
380 VAC, 3 , 50 Hz
440 VAC, 3 , 50 Hz*
440 VAC, 3 , 60 Hz
24 VDC
24 VDC
115 VAC, 1 , 50/60 Hz
230 VAC, 1 , 50/60 Hz
440 VAC, 1 , 50/60 Hz*
115 VAC, 1 , 50/60 Hz
Option or Shipyard Supply
Power
230 VAC, 1 , 50/60 Hz
440 VAC, 1 , 50/60 Hz*
Specify power supply when ordering
*Optional transformer required
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Unit for FAR-2117/2127
XN12AF: 33 kg 73 lb
XN-20AF: 39 kg 86 lb
XN-24AF: 42 kg 93 lb
XN-20AF: 2040 80.3"
XN-24AF: 2550 100.4"
1260 49.6"
4- 15
4- 15
300 11.8"
468 18.4"
468 18.4"
300 11.8"
10 kg 22 lb
Antenna Unit for FAR-2137S
Processor Unit RPU-013
SN-30AF: 127 kg 280 lb
SN-36AF: 133 kg 293.2 lb
2-
7
385 15.2"
370 14.6"
SN-36AF: 3765 148.2"
SN-30AF: 3090 121.7"
421 16.6"
378 14.9"
275 10.8"
530 20.9"
110 105 100 105 110
4.3" 4.1" 3.9" 4.1" 4.3"
8- 15
7
137
5.4"
350 13.8"
0.3"
27
1.1"
432 17.0"
561 22.1"
250 9.8"
286 11.3"
Display Unit MU-201CR
95
3.7"
360 14.2"
411 16.2"
Bracket mount 18.3 kg 40.4 lb
534 21.0"
Full-keyboard Control Unit RCU-014
3.7 kg 8.2 lb
Bracket
(option)
287 11.3"
352 13.9"
526 20.7"
308 12.1"
4- 4
Hand Grip
(option)
39 1.5"
54 2.1"
92 3.6"
398 15.7"
Panel mount 11.0 kg 33.5 lb
506 19.9"
Remote Control
Unit RCU-016
2.4 kg 5.3 lb
Trackball Control
Unit RCU-015
2.4 kg 5.3 lb
110 4.3"
110 4.3"
4- 4
4- 4
506 19.9"
4- 8
490 19.3"
534 21.0"
30 80
35 1.4"
50 2.0"
35 1.4"
50 2.0"
160 6.3"
160 6.3"
1.9" 3.2"
89 3.5"
89 3.5"
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
04055Y Printed in Japan
FURUNO U.S.A., INC.
FURUNO DANMARK AS
Camas, Washington, U.S.A.
Hvidovre, Denmark
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO (UK) LIMITED
FURUNO NORGE A/S
Denmead, Hampshire, U.K.
Ålesund, Norway
Phone: +44 2392-230303 Telefax: +44 2392-230101
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO FRANCE S.A.
FURUNO SVERIGE AB
Bordeaux-Mérignac, France
Västra Frölunda, Sweden
Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO ESPANA S.A.
FURUNO FINLAND OY
Madrid, Spain
Espoo, Finland
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97DowPnholonae:d+f3r5o8m9 4W35w5w6.7S0omTealenfauxa: l+s3.5c8om9 4.3A55ll 6M71a0nuals Search And Download.
|