24V DRIVE, HIGH SPEED LINE
THERMAL PRINTER
3” MECHANISM, WITH OR WITHOUT CUTTER
FTP-632MCL001/002/303/304
■ OVERVIEW
FTP-632MCL/FTP-622DCL Series is an ultra high speed line
thermal printer driven by 24 VDC, printing on 3-inch wide paper
(80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
FTP-632MCL001
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
FTP-632MCL303/304
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
FTP-622DCL001
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-632MCL001/002/303/304
(Continued)
Item
Specifications
Part number
Interface
FTP-632MCL001/002
FTP-632MCL303/304
Centronics (ESC/POSTM), RS232C
24 VDC ± 5%, Voltage
2
Current : average*
(
): Peak
For head
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
Power supply
Dimensions
For motor
24 VDC ± 5%, 1.0 A maximum
For cutter
---
24 VDC ± 5%, 1.0 A maximum
For logic
5 VDC ± 5%, 0.5 A maximum
108 (W) × 48 (D) × 20 (H) mm (Excluding lever)
131 (W) × 89 (D) × 24 (H) mm
approximately 94 g
Mechanism
Interface board
117 (W) × 57 (D) × 38 (H) mm
Weight
approximately 330 g
Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard driving
method)
Wear resistance : 50 km (at 25% printing ratio)
Expected life
Mechanism
Cutter
---
500,000 cuts
3
Operating temperature 0 to +50°C*
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
Detection
By photointerrupter
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
Recommended thermal sensitive paper
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-632MCL001/002/303/304
■ DIMENSIONS
Mechanism
FTP-632MCL001/002
PAPER INSERTION(MCL001)
20.1
HEAD UP LEVER(AT HEAD DOWN)
CENTER OF PAPER
PAPER
INSERTION
(MCL002)
HEAD CONNECTOR
76.8(POSITIONING HOLE PITCH)
+
1
57.0 –
50.9
Unit: mm
(107.9)
Interface board
130.8
120.7
116.8
87.6
19.1
5.1
5.1
CN2**
CN5
CN3
4—ø3.6
CN10
CN11*
CN13
5.1
5.1
43.2
95.4
105.4
120.7
*CN11 on FTP-622DCL011/111 & 622DSL011/112 only
**CN2 on FTP- 622DSL only
Unit: mm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-632MCL001/002/303/304
■ DIMENSIONS
Mechanism
FTP-632MCL303/304
(cutter cable)
(motor cable)
Unit: mm
Interface board
130.8
120.7
116.8
87.6
5.1
5.1
19.1
CN2*
CN5
CN3
4-Ø3.6
CN11
CN13
CN10
5.1
5.1
43.2
86.4
105.4
120.7
Unit: mm
*CN2 on FTP-622DSL only
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-632MCL001/002/303/304
■ CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side : PHR-16 (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Motor
Head up level
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
3. Sensor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
Sensor
: PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-632MCL001/002/303/304
4. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
■ FUNCTION
ITEM
ITEM
8. Cutter trouble detection
9. Motor power save
1.
2.
3.
4.
5.
6.
7.
Test printing
Paper-out detection
Paper near end detection
Head-up detection
10.
11.
12.
13.
14.
Mark detection
MCU trouble detection
Power on/off sequence protection
Motor protection
Abnormal temperature detection of thermal head
Blown fuse detection
Abnormal voltage detection of head
Hardware timer
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|