24v drive, reCeiPT PriNTer MiCrO UNiT
2” HiGH SPeed THerMaL PriNTer
FTP-627USL401/402
■
Overview
The FTP-627 USL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-627 USL Series can be used for a variety of applica-
tions, such as POS terminals, ticket vending machines, label
printers, banking terminals, and measurement and medical
equipment.
■
HiGHLiGHTS
•
Ultra low profile
Height 108 mm, width 100 mm, depth 94 mm
FTP-627USL401 platen closed
•
High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
•
•
Auto Cutter
Long life and high reliable guilotine with dedicated motor.
Easy paper setting
Our lever platen release mechanism allows a
wide paper route, so 60 mm diameter paper can be easily
inserted. Conventional auto loading is also available.
•
Multifunctional die-cast frame
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
FTP-627USL40ꢀ platen open
•
Barcodes
Prints standard, extended and 2-D types
•
RoHS compliant
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
n SPeCiFiCaTiONS
Item
Specification
Iterface
Conforms to USB/Serial
Power
For print head
24 VDC average current, 0.5A (0.9A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
24 VDC ±5%, 0.9 A maximum
24 VDC ±5%, 1.1 A maximum
4.75 to 5.25VDC, 0.5 A maximum
100 x 94 x 108 mm (WxDxH)
supply
For motor
For cutter
For logic
Dimensions Mechanism and board
Weight
Mechanism and board
Approximately 310g
Life
Head
Pulse durability: 50 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance
50km (print ratio: 12.5% or less).
500,000 cuts (20 cuts/minute)
3,000 hours
Cutter
MTBF
Mechanism
Circuit board
500,000 hours
Operating
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0ºC to +50ºC
environment
20 to 85% RH (no condensation)
-20ºC to +60ºC (paper not included)
5 to 95% RH (no condensation)
Detection
function
Head temperature detection Detected by thermistor
Paper out/mark detection
Detected by photo-interruptor
Detected by sliding switch
Platen release
Recommended thermal sensitive paper
High sensitive paper
Standard paper
TF50KS-E4 (Nippon paper)
TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD105R (Oji paper)
FTP-020P0701 (58mm)
TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
Medium life paper
Long life paper
P220VBB-1 (Mitsubishi paper)
PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
*+5˚C to +40˚C printing density assurance range.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
n FUNCTiON OF iNTerFaCe bOard
Item
Item
1.
2.
3.
4.
5.
6.
7.
Test print function
8.
9.
Cutter trouble detect
Paper out detection
Motor power saving function
Paper near end detection
Platen open detection
10. Mark detection function
11. MCU operation abnormality detection
12. Power ON/OFF sequence protection
13. Motor over-current protection
14. Hardware timer
Thermal head temperature abnormality detection
Blow-out fuse detection
Head voltage abnormality detection
n iNTerFaCe, COMMaNd, OPTiONS
Connectors on Control Board
Name
Functions
Remarks
Note
CN1 +24V power supply connector Connection for +24V power supply
CN2 RS-232C
Connection for serial interface
Connection for USB interface
-
*2
*2
CN3 USB I/F connector
CN4
-
CN5 Cutter connector
Connection for paper cutter
Connection for operation panel
Connection for near end switch
-
CN6 Operation panel connector
CN7 Near end sensor connector
*ꢀ
CN8
-
CN9 Logic power connector
Connection for +5V power Supply
CN10 Head/motor connector
Note: *1: Option
Connection for thermal head & paper feed motor 2-inch, 24 pin
*2: Depends on P/N
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
n diMeNSiONS
1. Printer mechanism
FTP-627 Unit Paper ø60
*2
2-screw holes *3
Paper
86 (paper presenting area)
(Cross section)
Hook depth 6 *3
Unit: mm
Note: 1. The cable size and FPC are not included in this drawing.
2. Do not mount anything in the shaded area except the printer.
3. Connect to the body with 2 screws at 2 hooks.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
n COMMaNdS
Command
Contents
HT
LF
Moves print position to the next tab.
Line feed.
FF
Feeds forms (new page).
ESC FF
Data printing in page printing mode.
Sets reverse printing.
ECS RS
ESC US
Resets reverse printing.
ESC SP+n
ESC ! + n
Character spacing setting.
Sets print mode.
ESC $+n1+n2
ESC % + n
ESC & +y+c1+c2+x+d1to dn
ESC *+m+n1+n2+d1+dN
ESC - +n
Absolute position spacing.
External registration character specification/cancellation.
External registration character definition.
Sets bit image mode.
Undeline setting.
ESC 2
Sets 1/6 inch line feed length.
Sets the line feed length.
ESC 3+n
ESC ? + n
ESC @
External registration character deletion.
Printer initialization.
ESC A+n
Sets the space between the line.
Sets the page length by character line.
Sets the tab position.
ESC C+n
ESC D+d1+dN +NUL
ESC E+n
Highlighted printing specification/cancellation
Feeds paper in forward direction and prints.
Reverse paper feed.
ESC J+n
ESC K+n
ESC L
Page printing mode selection.
Frame overlay function.
ESC Q+n+!+j
ESC R+n
Selects international character.
Line printing mode.
ESC S
ESC T+n
Print direction setting (only page mode).
Right Rotation 90° specification / cancellation.
ESC V+n
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
Commands continued
Command
Contents
ESC W+Xꢀ+X2+ꢀ+Y2+dXꢀ+dX2+dXꢀ+dY2
Page printing mode printing area setting.
ESC X+m+n
ESC Y+01h+ESC+x+a+m+d~
ESCY+n1+n2
ESC a+n
Setting the turning time of the motor excitation.
Program download.
Relative position setting.
Positional alignment.
ESC c+1+n
ESC c+5+n
ESC d+n
Sets internal processing.
Panel switch enable/disable setting.
Printing and n-line feeding.
ESC i
Full cut
ESC m
Partial cut
ECS s+n
Sets printing speed.
ECS t+n
Character code table selection.
Sets/resets upside down printing.
Flash memory delete.
ESC {+n
ESC DEL+n
FS !+n
Kanji printing mode collective specification.
Kanji printing mode specification.
Kanji underline specification/cancellation.
High speed collective image printing specified.
Kanji printing mode cancellation.
External character definition.
Sets the detection functions.
Kanji code system selection.
Correction of impressed energy.
Kanji spacing setting.
FS &
FS_+n
FS *+ m+n1+n2+d1 to dn
FS .
FS 2+c1+c2+d1 to dn
FS 9+n
FS C+n
FS E+n
FS S+n+n1+n2
FS W+n
Kanji double height adn width printing specification/cancellation.
Parameter transmission.
ꢀ
FS r+n*
GS ! + n
Character size specification.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
Commands continued
Command
Contents
GS $ + n1 + n2
GS & +m + x + y1 + y2 + d1 to dn
GS' + m + n
Vertical absolute position specification in page printing mode.
Registered bit image definition.
Registered bit image printing.
Registered bit image definition.
Registered bit image printing.
Line feeds to the next mark.
Sets the line feed length after mark detection.
Angle setting of bar code.
GS *+x+y1+y2 +d1+dn
GS/ +m
GS <
GS A+m+n
GS B+m
GS E+n
Sets print quality.
GS H+n
HRI character printing position selection.
Left margin position setting.
Printer ID demand.
GS L+n1+n2
GS M+n
GS W + n1 + n2
GS Y +n1 + n2
Printing area width setting.
Vertical relative position specification in page printing mode (vertical
direction of characters).
GS e+n+m
GS f + n
GS h+n
Sets bar code width.
HRI character font selection.
Sets bar code height.
Bar code printing.
y) GS k+m +d1to dk + NUL
x) GS k+m+n+ d1 to dn
GS k+m+k1+k2+k3+k4+{[p1][d(1,1)] ~
[d(1,i)} ~ {[pi][d(i,1)]~[d(i,j)} [00]16
Print of 2Dcode (QR).
GS k+m+k1+k2+k3+k4+k5+d1~dn
GS k+m+k1+k2+k3+k4+k5+k6+d1~dn
GS w+n
Print of 2 Dcode (maxi).
Print of 2 Dcode (PDF417).
Sets bar code length.
Customize printer.
GS C+C+n1+n2+m+fn+b+d1~dn
*ꢀ: These commands are valid with FTP-627DSL600 series.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-627USL401/402
n PriNT SaMPLe
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: [email protected]
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-3021
Email: [email protected]
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. September 26, 2007.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|