PRIMERGY TX120 Server
Operating Manual
Edition July 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
TX120
Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Contents
TX120
Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
The PRIMERGY TX120 server is an Intel-based server for small and medium-
sized networks and can be used in the horizontal position or as a desktop
model.
The PRIMERGY TX120 server features exceptionally low energy consumption,
very quiet running and a compact size. As a result, it is also the ideal solution
for home and small offices.
Thanks to its highly developed hardware and software components, the
PRIMERGY TX120 server offers a high level of data security and availability.
These include hot-plug HDD modules, the ServerView server management
software, Prefailure Detection and Analysing (PDA) and Automatic Server
Reconfiguration and Restart (ASR&R).
Security functions in the BIOS Setup protect the data on the server against
manipulation. Additional security is provided by the lockable drive cover.
1.1
Documentation overview
I
PRIMERGY manuals are available in PDF format on the ServerBooks
DVD. The ServerBooks DVD is part of the ServerStart Suite supplied with
every server.
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL:
http://manuals.fujitsu-siemens.com. The PRIMERGY server documentation
can be accessed using the Industry standard servers navigation option.
TX120
Operating Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Documentation overview
Introduction
Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This manual is intended for those people responsible for installing the hardware
and ensuring that the system runs smoothly. The manual contains all the infor-
mation required to install and operate your PRIMERGY TX120.
A knowledge of hardware and data transmission, as well as basic knowledge of
the operating system used, is necessary to fully understand the various
expansion options. You should also have a good working knowledge of the
English language.
Additional server documentation
The PRIMERGY TX120 documentation also includes:
–
–
–
“Quick Start Hardware - PRIMERGY TX120” (leaflet)
“Quick Start Software - Quick Installation Guide” (leaflet)
“Warranty” manual (print version supplied with the system, PDF file available
on the ServerBooks DVD supplied)
–
“Safety notes and other important information” manual (print version
supplied with the system, PDF file available on the ServerBooks DVD
supplied)
–
–
“Ergonomics” manual (PDF file available on the ServerBooks DVD supplied)
“Returning used devices” manual (PDF file available on the ServerBooks DVD
supplied)
–
–
“Helpdesk” (leaflet with worldwide helpdesk telephone numbers)
Technical manual for the system board D2550 (PDF file available on the
ServerBooks DVD supplied)
–
–
“BIOS Setup” (PDF file available on the ServerBooks DVD supplied)
“PRIMERGY TX120 Server Options Guide” (PDF file available on the
ServerBooks DVD)
I
The “Options Guide” describes the server expansion and modifi-
cation options.
–
“ServerView Suite” includes the ServerStart Disc 1, the ServerStart Disc 2
and the ServerBooks DVD. The version of the “PRIMERGY ServerView Suite
- ServerStart” user manual is available on the ServerBooks DVD.
I
If you need a replacement copy of the ServerBooks DVD, send the
details of your server to the following e-mail address: Reklamat-PC-
8
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Introduction
Documentation overview
–
“Integrated RAID for SAS User’s Guide” (PDF file available on the
ServerBooks DVD supplied)
–
–
“ServerView RAID User Manual” (PDF file available on the ServerBooks DVD)
“Integrated Mirroring User’s Guide” (PDF file available on the ServerBooks
DVD)
Further sources of information:
–
–
–
–
–
–
Manual for the monitor
Manual on ServerView Server Management
Manual for the remote testing and diagnostic system RemoteView
Documentation for boards and drives
Documentation for your operating system
Information files on your operating system
TX120
Operating Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Introduction
1.2
Features
System board
The features of the system board are described in the technical manual for the
system board D2550 for the hardware and in the “BIOS Setup” for the firmware
Hard disk drives
The server is equipped with a drive bay in which up to 2 SAS HDD modules can
be inserted. Each HDD module can accommodate a SAS hard disk drive with a
2.5 inch format. The module is connected to the SAS backplane without cables
via the SAS interface. This allows hard disk drive modules to be easily plugged
in or pulled out.
The hard disk subsystem is designed for SAS, each with one channel for each
hard disk drive.
If the server has the corresponding RAID configuration, HDD modules can also
be exchanged during operation.
A hard disk drive extension box can be installed optionally (with a maximum of
three HDD modules).
Onboard SAS controller with Integrated Mirroring Enhanced functionality
An onboard SAS controller with "Integrated Mirroring Enhanced" (IME) function-
ality is fitted to operate the six hard drives. IME also provides RAID functionality
for configuring the internal hard drives (RAID level 0, 1, 1E).
I
A separate utility is available to the controller for IME configuration. For
further information, refer to the “Integrated Mirroring User’s Guide” on the
ServerBooks DVD (select “Controllers” from the menu).
10
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Introduction
Features
HDD expansion box and accessible drives
Two mounting locations are available:
–
–
a 3.5-inch bay for an HDD expansion box or a backup drive.
a 5.25 inch bay with a slimline CD/DVD drive.
The accessible drives cannot be replaced during operation.
USB ports
The USB ports on the front of the device enable USB devices to be connected
directly. The maximum length of the external cable are three meters.
Power supply
The server has a built-in power supply unit, which automatically sets itself to a
mains voltage in the range 100 V - 127 V or 200 V - 240 V.
High level of availability and data security
When memory data is accessed, 1-bit errors in the main memory are identified
and automatically corrected with the ECC (Error Correcting Code) method.
ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in
case of an error and automatically “hides” the defective system components.
The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens
Computers analyzes and monitors all components that are critical for system
reliability.
The onboard SAS controller supports RAID levels 0 and 1, thereby increasing
the availability of the system. The hot-plug HDD modules provide additional
security.
TX120
Operating Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Introduction
iRMC with integrated service LAN port
I
The features of the iRMC Advanced Video Redirection and Remote
Storage are available as an option.
The iRMC (integrated Remote Management Controller) is a BMC with
integrated service LAN port and expanded functionality that was previously only
available with additional plug-in cards. In this way, the iRMC enables complete
control of PRIMERGY servers, regardless of system status, and thus particu-
larly the control of PRIMERGY servers that are in the "out-of-band" system
status.
By default, the service LAN port is assigned to the iRMC. However, you can also
configure the LAN port as the service LAN port in the BIOS setup. The LAN port
then fulfills the tasks of a standard LAN port and those of a service LAN port at
the same time (virtual LAN with 2 different IP addresses).
Major functions supported by the iRMC include the following:
●
●
●
Browser access via iRMC's own Web server
Secure communication (SSH, SSL)
Power Management for the managed server (depending on its system
status)
●
●
●
●
●
●
●
●
Text console bypass
Command Line Interface (CLP)
Simple, interactive or script-based iRMC configuration
iRMC-s own user management
Automatic network configuration via DNS / DHCP
Power supply of the iRMC via the system standby supply
Full-coverage alarm management
System Error and Event Log (SEL) reading and processing
More information about the iRMC can be found in the "PRIMERGY ServerView
Suite - integrated Remote Management Controller (iRMC)" manual (see “Liter-
12
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Introduction
Features
Server Management
Server Management is implemented using theServerView software supplied
combined with PDA (Prefailure Detection and Analyzing) technology from
Fujitsu Siemens Computers. PDA reports the threat of a system error or
overload at an early stage, allowing preventive measures to be taken.
ServerView enables the management of all PRIMERGY servers in the network
via a central console. The following key functions and others are supported by
ServerView:
●
●
Round-the-clock monitoring, regardless of server status
High-performance, graphical console bypass (AVR) protected by
HTTPS/SSL (128 bit)
●
●
●
●
●
Remote storage via USB
Remote power on (Wake On LAN)
Automatic switch-off when the housing is opened (Housing monitoring)
Temperature monitoring of the CPU and the surrounding area
Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors
●
●
●
Power monitoring
End-of-life monitoring of fans with prompt notification before failure
Watchdog timer for operating system monitoring and application monitoring
with ASR&R
Further information about ServerView server management is provided in the
ServerStart
You can configure the PRIMERGY server quickly and precisely with the Server-
Start software provided. User-guided menus are available for installing the
server operating system (for further details see section “Configuring the server”
TX120
Operating Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Introduction
Service and support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch point) on the different hot pluggable components
are colored green to ensure simple and immediate recognition.
In order to avoid damage to components by incorrect handling when they are
being installed and removed, green highlighting also identifies the areas of all
components that can be touched without causing damage to the respective
component.
The Flash EPROM program supplied with the Fujitsu Siemens Computers
utilities supports a fast BIOS update.
With the iRMC (integrated Remote Management Controller) on the system
board and the optional remote testing and diagnostic system RemoteView, the
PRIMERGY TX120 server can also be maintained and serviced remotely. This
enables remote diagnosis for system analysis, remote configuration and remote
restart should the operating system or hardware fail.
RemoteView
RemoteView is the remote management solution from Fujitsu Siemens
Computers for PRIMERGY servers. RemoteView and the relevant hardware
components integrated on the system board allow remote monitoring and
maintenance as well as fast restoration of operation in the event of errors.
Remote monitoring and maintenance avoids time-consuming and costly on-site
repairs and reduces service costs. This leads to a reduction in the total cost of
ownership and an excellent return on investment for the remote management
solution.
The administrator can access all system information and information from the
sensors such as fan speeds or voltages via the iRMC's Web interface (see
the text-based or graphic console bypass (Advanced Video Redirection, AVR)
and get information about remote storage.
I
The features of the iRMC Advanced Video Redirection and Remote
Storage are available as an option.
14
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Introduction
Notational conventions
1.3
Notational conventions
The following notational conventions are used in this manual:
Text in italics
indicates commands, menu items or software programs.
“Quotation marks” indicate names of chapters and terms that are being
emphasized.
Ê
describes activities that must be performed in the order
shown.
V
CAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
I
indicates additional information, notes and tips.
TX120
Operating Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Introduction
1.4
Technical data
Electrical data
Rated voltage range
Frequency
100 V - 127 V or 200 V - 240 V
50 Hz - 60 Hz
Rated current with basic configuration 100 V - 240 V / 1.63 A - 0.69 A
Max. rated current
Effective power
Apparent power
Heat dissipation
Main power fuse
Protection class
100 V - 240 V / 2.0 A - 1.0 A
163 W
166 VA
587 kJ/h (556 btu/h)
16 A
I
Compliance with regulations and standards
Product safety and
ergonomics
IEC 60950-1 / EN 60950-1, UL/CSA 60950-1,
CNS 14336 / GB 4943 / EN 50371
Electromagnetic
compatibility
FCC class A
CNS 13438 class A; VCCI class A
AS/NZS CISPR 22 class A / GB 9254 class A
GB 17625
Interference emissions EN 55022 class A
Harmonic current EN 61000-3-2
Flicker
EN 61000-3-3
Interference immunity EN 55024, EN 300386
CE marking Low Voltage Directive 2006/95/EC
to EU directives
(Product Safety)
Electromagnetic Compatibility 2004/108/EC
16
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Introduction
Technical data
Mechanical values
Horizontal operating position Upright operating position
Width
Depth
Height
99 mm (195 mm with feet)
399 mm
340 mm
399 mm
340 mm (360 mm with feet)
99 mm (104 mm with feet)
Weight
Approx. 10 kg (depending on configuration).
Ventilation clearance
At least 200 mm on the front and rear.
Ambient conditions
Environment class 3K2
Environment class 2K2
EN 60721 / IEC 721 Part 3-3
EN 60721 / IEC 721 Part 3-2
Temperature:
Operation (3K2)
Transport (2K2)
Humidity
15 °C ... 35 °C
-25 °C ... 60 °C
10% ... 85%
Condensation during operation must be avoided!
Noise level
Sound power level LWAd (ISO 9296)
< 4.0 B (standby)
< 4.4 B (operation)
Sound pressure level at adjacent workstation
< 28 dB (A) (standby)
< 31 dB (A) (operation)
L
pAm (ISO 9296)
TX120
Operating Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê
First of all, it is essential that you familiarize yourself with the safety infor-
Ê
Ê
Transport the server to the place where you want to install it
Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
Ê
Make sure that all necessary manuals (see “Additional server documen-
tation” on page 8) are available; print out the PDF files if required.
Ê
Ê
Wire the server. Follow the instructions in the sections “Connecting devices
Ê
Ê
Connect the server to the mains (see section “Connecting the server to the
Familiarize yourself with the controls and displays on the front and rear of the
TX120
Operating Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation steps, overview
Ê
Configure the server and install the desired operating system and applica-
tions. The following options are available:
–
Remote configuration and installation with ServerStart:
With the ServerStart Disc 1 provided, you can configure the server and
install the operating system in a convenient manner.
Details on how to operate ServerStart, as well as some additional infor-
mation, can be found in the “PRIMERGY ServerView Suite - ServerStart”
manual.
Configuration information can also be found in section “Configuration
–
Local configuration and installation with or without ServerStart (see
I
You will find more information on installing the server remotely or
locally in the ServerStart manual. This manual contains the instal-
lation steps (“Quick Step Guide”). A corresponding file in PDF format
is included on the ServerBooks DVD.
20
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
3
Important information
In this chapter you will find essential information regarding safety when working
on your server.
3.1
Safety
I
The following safety instructions are also provided in the manual “Safety
notes and other important information”.
This device complies with the relevant safety regulations for data processing
equipment. If you have any questions about where you can set up the device,
contact your sales outlet or our customer service team.
V
CAUTION!
●
The actions described in this manual should only be performed by
technical specialists.
●
●
Equipment repairs should only be performed by service personnel.
Any unauthorized opening and improper repairs could expose the
user to risks (electric shock, energy hazards, fire hazards) and could
also damage the equipment.
●
Any unauthorized opening of the device will result in the invalidation
of the warranty and exclusion from all liability.
TX120
Operating Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Important information
Before starting up
V
CAUTION!
●
During installation and before operating the device, observe the
instructions on environmental conditions for your device (see section
●
If the server has been moved from a cold environment, condensation
may form both inside and on the outside of the machine.
Wait until the server has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the server if this requirement is not met.
●
Only transport the server in the original packaging or in packaging
that protects it from impacts and jolts.
Installation and operation
V
CAUTION!
●
●
This unit should not be operated in ambient temperatures above
35°C.
If the unit is integrated into an installation that draws power from an
industrial power supply network with an IEC309 connector, the power
supply's fuse protection must comply with the requirements for non-
industrial power supply networks for type A connectors.
●
●
●
The unit automatically adjusts itself to a mains voltage in a range of
100 V - 127 V or 200 V - 240 V. Ensure that the local mains voltage
lies within these limits.
This device must only be connected to properly grounded shock-
proof sockets or insulated sockets of the rack's internal power supply
with tested and approved power cables.
Ensure that the device is connected to a grounded shockproof socket
close to the device.
22
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Important information
Safety
V
CAUTION!
●
Ensure that the power sockets on the device and the grounded shock-
proof sockets are freely accessible.
●
The On/Off button or the main power switch (if present) does not
isolate the device from the mains power supply. To disconnect it
completely from the mains power supply, unplug all network power
plugs from the grounded shockproof sockets.
●
Always connect the server and the attached peripherals to the same
power circuit. Otherwise you run the risk of losing data if, for example,
the central processing unit is still running but a peripheral device (e.g.
memory subsystem) fails during a power outage.
●
●
Data cables must be adequately shielded.
The EN 50173 and EN 50174-1/2 standards apply for LAN cabling.
The minimum requirement is the use of a category 5 screened LAN
cable for 10/100 Mbps Ethernet, or a category 5e cable for Gigabit
Ethernet. The requirements from the ISO/IEC 11801 specification
must also be met.
●
Route the cables in such a way that they do not create a potential
hazard (make sure no-one can trip over them) and that they cannot
be damaged. When connecting the server, refer to the relevant
instructions in this manual.
●
●
●
Never connect or disconnect data transmission lines during a storm
(risk of lightning strike).
Make sure that no objects (e.g. jewelry, paperclips etc.) or liquids get
inside the unit (electric shock hazard, short circuit).
In emergencies (e.g. damaged casing, controls or cables, penetration
of liquids or foreign bodies), switch off the server immediately, remove
all power plugs and contact your sales outlet or customer service
team.
TX120
Operating Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Important information
V
CAUTION!
●
Proper operation of the system (in accordance with IEC 60950-1/
EN 60950-1) is only ensured if the casing is completely assembled
and the rear covers for the installation slots have been fitted (electric
shock, cooling, fire protection, interference suppression).
●
Only install system expansions that satisfy the requirements and
rules governing safety and electromagnetic compatibility and those
relating to telecommunication terminals. If you install other expan-
sions, they may damage the system or violate the safety regulations.
Information on which system expansions are approved for installation
can be obtained from our customer service center or your sales
outlet.
●
The components marked with a warning notice (e.g. lightning symbol)
may only be opened, removed or exchanged by authorized, qualified
personnel. Exception: hot-pluggable power supply units can be
replaced.
●
●
The warranty is void if the server is damaged during installation or
replacement of system expansions.
Only set screen resolutions and refresh rates that are specified in the
operating manual for the monitor. Otherwise, you may damage your
monitor. If you are in any doubt, contact your sales outlet or customer
service center.
24
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Important information
Safety
Batteries
V
CAUTION!
●
Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see the technical manual for the
●
●
●
Do not throw batteries into the trash can. They must be disposed of
in accordance with local regulations concerning special waste.
The battery must be disposed of in accordance with local regulations
concerning special waste.
Replace the lithium battery on the system board in accordance with
the instructions in the technical manual for the system board (see
●
All batteries containing pollutants are marked with a symbol (a
crossed-out garbage can). In addition, the marking is provided with
the chemical symbol of the heavy metal decisive for the classification
as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
TX120
Operating Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Important information
Working with CDs/DVDs and CD/DVD drives
When working with devices with CD/DVD drives, these instructions must be
followed.
V
CAUTION!
●
Only use CDs/DVDs that are in perfect condition in your server's
CD/DVD drive, in order to prevent data loss, equipment damage and
injury.
●
Check each CD/DVD for damage, cracks, breakages etc. before
inserting it in the drive.
Note that any additional labels applied may change the mechanical
properties of a CD/DVD and cause imbalance.
Damaged and imbalanced CDs/DVDs can break at high drive speeds
(data loss).
Under certain circumstances, sharp CD/DVD fragments can pierce
the cover of the CD/DVD drive (equipment damage) and can fly out
of the device (danger of injury, particularly to uncovered body parts
such as the face or neck).
I
You can prevent mechanical damage and damage to the CD/DVD drive,
as well as premature CD/DVD wear, by observing the following sugges-
tions:
–
Only insert CDs/DVDs in the drive when needed and remove them
after use.
–
–
Store the CDs/DVDs in suitable sleeves.
Protect the CDs/DVDs from exposure to heat and direct sunlight.
Laser information
The CD/DVD drive complies with IEC 60825-1 laser class 1.
V
CAUTION!
The CD/DVD drive contains a light-emitting diode (LED), which under
certain circumstances produces a laser beam stronger than laser
class 1. Looking directly at this beam is dangerous.
Never remove parts of the CD/DVD drive casing!
26
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Important information
Safety
Modules with Electrostatic-Sensitive Devices
Modules with electrostatic-sensitive devices are identified by the following
sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must always observe the
following points:
●
Switch off the system and remove the power plugs from the power outlets
before installing or removing components with ESDs.
●
You must always discharge static build-up (e.g. by touching a grounded
object) before working with such components.
●
●
Any devices or tools that are used must be free of electrostatic charge.
Wear a suitable grounding cable that connects you to the external chassis of
the system unit.
●
Always hold components with ESDs at the edges or at the points marked
green (touch points).
●
●
Do not touch any connectors or conduction paths on an ESD.
Place all the components on a pad which is free of electrostatic charge.
I
For a detailed description of how to handle ESD components, see the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
TX120
Operating Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CE conformity
Important information
Other important information:
●
During cleaning, observe the instructions in section “Cleaning the server” on
●
Keep this operating manual and the other documentation (such as the
technical manual, CD) close to the device. All documentation must be
included if the equipment is passed on to a third party.
3.2
CE conformity
The system complies with the requirements of the EC directives
2004/108/EC regarding “Electromagnetic Compatibility” and
2006/95/EC “Low Voltage Directive”. This is indicated by the CE
marking (CE = Communauté Européenne).
3.3
FCC Class A Compliance Statement
If there is an FCC statement on the device, then:
The following statement applies to the products covered in this manual, unless
otherwise specified herein. The statement for other products will appear in the
accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a
“Class A” digital device, pursuant to Part 15 of the FCC rules and meets all
requirements of the Canadian Interference-Causing Equipment Standard
ICES-003 for digital apparatus. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in strict accordance with the instructions, may cause harmful
interference to radio communications. However, there is no warranty that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
28
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Important information
Transporting the server
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers is not responsible for any radio or television inter-
ference caused by unauthorized modifications of this equipment or the substi-
tution or attachment of connecting cables and equipment other than those
specified by Fujitsu Siemens Computers. The correction of interferences
caused by such unauthorized modification, substitution or attachment will be the
responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to
any and all optional peripheral or host devices. Failure to do so may violate FCC
and ICES rules.
WARNING:
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
3.4
Transporting the server
V
CAUTION!
Only transport the server in its original packaging or in packaging that
protects it from impacts and jolts. Do not unpack the server until it is at
its installation location.
If you need to lift or transport the server, ask other people to help you.
Never lift or carry the device by the handles on the front panel.
TX120
Operating Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental protection
Important information
3.5
Environmental protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu Siemens
Computers standard for “environmentally friendly product design and devel-
opment”. This means that key factors such as durability, selection and labeling
of materials, emissions, packaging, ease of dismantling and recycling have
been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-saving information
Devices that do not need to be constantly switched on should be switched off
until they are needed as well as during long breaks and after completion of work.
Packaging information
Do not throw away the packaging. You may need it later for transporting the
system. If possible, the equipment should only be transported in its original
packaging.
Information on handling consumables
Please dispose of printer consumables and batteries in accordance with the
applicable national regulations.
In accordance with EU directives, batteries must not be disposed of with
unsorted domestic waste. They can be returned free of charge to the manufac-
turer, dealer or an authorized agent for recycling or disposal.
All batteries containing pollutants are marked with a symbol (a crossed-out
garbage can). They are also marked with the chemical symbol for the heavy
metal that causes them to be categorized as containing pollutants:
Cd Cadmium
Hg Mercury
Pb Lead
30
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Important information
Environmental protection
Labels on plastic casing parts
Please avoid sticking your own labels on plastic parts wherever possible, since
this makes it difficult to recycle them.
Returns, recycling and disposal
The device must not be disposed of with domestic waste. This
device is labeled in compliance with European directive
2002/96/EC on waste electrical and electronic equipment (WEEE).
This directive sets the framework for returning and recycling used
equipment and is valid across the EU. When returning your used
device, please use the return and collection systems available to
you. Further information can be found at
Details regarding the return and recycling of devices and consumables within
Europe can also be found in the “Returning used devices” manual, via your local
Fujitsu Siemens Computers branch or from our recycling center in Paderborn:
Fujitsu Siemens Computers
Recycling Center
D-33106 Paderborn
Tel. +49 5251 8 18010
Fax +49 5251 8 18015
TX120
Operating Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Hardware installation
V
CAUTION!
●
Follow the safety instructions in the chapter “Important information”
●
Do not expose the server to extreme environmental conditions (see
humidity and heat.
●
Make sure that the server is acclimatized for the time indicated in this
table before putting it into operation.
Temperature difference (°C) Minimum acclimatization time
(hours)
5
3
5
10
15
7
20
8
25
30
9
10
Table 1: Acclimatization time
the difference between the operating environment temperature and
the temperature to which the server was exposed previously (outside,
transport or storage temperature).
TX120
Operating Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking the server
Hardware installation
4.1
Unpacking the server
V
CAUTION!
Follow the safety instructions in the “Important information” on page 21
chapter.
The server must always be lifted or carried by at least two people.
Do not unpack the server until it is at its installation location.
Ê
Ê
Transport the server to the place where you want to set it up.
Unpack all individual parts.
Keep the original packaging in case you want to transport the server again.
Check the delivery for any damage during transport.
Ê
Ê
Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the identi-
fication rating plate.
Ê
Notify your supplier immediately should you discover that the items delivered
do not correspond to the delivery note.
34
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hardware installation
Setting up the server
4.2
Setting up the server
Ê
Install the server.
Note that the server may be operated in the vertical (see section
CAUTION!
–
The device must be protected from direct sunlight.
–
The required minimum distances for operation and maintenance
areas must be adhered to.
–
The server must be accessible at the rear for connection to other
devices (e.g. memory subsystem).
–
–
The mains plug must be accessible easily and safely.
To ensure sufficient ventilation of the system, a minimum clear
distance of 200 mm must be provided at the front and the rear of
the server.
Ê
Ê
Wire the server. Follow the instructions in the sections “Connecting devices
Connect the server to the mains (see section “Connecting the server to the
TX120
Operating Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the server
Hardware installation
4.2.1 Positioning the server vertically
V
CAUTION!
If the server is positioned vertically, the stabilizers must be attached!
The stabilizers must be attached in the correct direction (see figure 4 on
page 38).
Clipping the stabilizers together
a
a
Figure 2: Clipping the stabilizer together
Ê
Clip the stabilizers together in the direction of the arrow as far as the marking
line (a).
36
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hardware installation
Setting up the server
Adjusting the width of the stabilizers
3
2
a
1
1
2
a
3
Figure 3: Adjusting the width of a stabilizer
You may have to adjust the width of the stabilizers.
Ê
Ê
Ê
Slide your thumb or forefinger (1) under the locking springs (a).
Press the locking springs (a) upwards (2).
With the locking springs (a) disengaged, pull the stabilizer apart (3).
TX120
Operating Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the server
Hardware installation
Placing the server on the stabilizers
a
a
2
1
2
2
Figure 4: Placing the server on stabilizers
Ê
Place the server on the stabilizers (1).
Position the stabilizers between the rubber feet (a).
Press the stabilizers together (2).
Ê
38
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hardware installation
Setting up the server
4.2.2 Positioning the server horizontally
V
CAUTION!
If the server is positioned horizontally, the rubber feet must be attached!
Figure 5: Positioning the server horizontally
Ê
Place the server on its four rubber feet.
TX120
Operating Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting devices to the server
Hardware installation
4.3
Connecting devices to the server
The ports for external devices are on the front and rear of the server. The
additional ports available on your server depend on the PCI boards installed.
For further information refer to the “Options Guide” (see “Literature” on
page 77).
The standard ports are indicated by symbols and color coding:
5
1 2 3 4
6 7
Figure 6: Standard ports
1 LAN port
5 Monitor port (VGA) (blue)
6 Keyboard port (PS/2) (purple)
7 Mouse port (PS/2) (green)
2 2 x USB ports (black)
3 Service LAN port
4 Serial port COM1 (turquoise)
I
Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê
Connect the data cables to the server and peripherals.
page 44).
40
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hardware installation
Connecting the server to the mains
4.4
Connecting the server to the mains
The server is fitted with a built-in power supply.
V
CAUTION!
The server is automatically set to a mains voltage in the range 100 V -
127 V or 200 V - 240 V. You may only operate the server if its rated
voltage range corresponds to the local mains voltage.
2
1
3
Figure 7: Connecting the server to the mains
Ê
Ê
Connect the power cord to the server power supply (1).
Insert the mains plug into an earthing contact socket (2) in the internal
supply network.
Ê
Secure the power cord in the terminal so the insulated connector cannot be
disconnected from the server accidentally (3).
TX120
Operating Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connecting/disconnecting cables
Hardware installation
4.5
Notes on connecting/disconnecting cables
V
CAUTION!
Always read the documentation supplied with the device you wish to
connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always take hold of the
cable by the plug.
Follow the sequence described below to connect or disconnect external
devices to or from the server:
Connecting cables
Ê
Ê
Ê
Ê
Ê
Turn off all power and equipment switches.
Disconnect all power plugs from the grounded shockproof sockets.
Connect all cables to the server and peripherals.
Plug all data communication cables into the utility sockets.
Plug all power cables into the grounded shockproof sockets.
Disconnecting cables
Ê
Ê
Ê
Ê
Turn off all power and equipment switches.
Disconnect all power plugs from the grounded shockproof sockets.
Unplug all data communication cables from the utility sockets.
Disconnect the relevant cables from the server and all the peripherals.
42
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
5
Starting up and operation
V
CAUTION!
Follow the safety instructions in chapter “Important information” on
5.1
Opening the drive cover
1
2
Figure 8: Opening the drive cover
Ê
Ê
Turn the key counterclockwise (1).
Open the drive cover in the direction of the arrow (2).
TX120
Operating Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
Starting up and operation
5.2
Controls and displays
5.2.1 Front of server
2
3
1
12
10
8
11
9
7 6 5 4
Figure 9: Front of server
1
2
3
4
5
6
HDD FAULT indicator
HDD BUSY indicator
NMI button
7
8
9
Global error indicator
ID indicator
ID button
2 x USB ports
10 Reset button
11 On/Off button
Power-on indicator
Hard disk drive activity indicator 12 CD-/DVD drive indicator
44
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Starting up and operation
Controls and displays
Controls
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button. When the system is operating, pressing
the On/Off button will switch off the system.
I
The On/Off button does not disconnect the server from the
mains. To disconnect from the mains completely, remove the
power plug(s).
NMI
NMI button
Do not press! The NMI button may only be used by service
personnel.
I
RST
ID
Reset button
Pressing the reset button reboots the system.
ID button
When this button is pressed, the ID display (blue) on the front of the
server lights up.
TX120
Operating Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
Starting up and operation
Indicators on the control panel
Power-on indicator (dual color)
Lights orange when the server is switched off but mains voltage
is present.
Lights up green when the server is switched on and ready.
Hard drive activity indicator (green)
Flashes green when an internal hard disk drive is being
accessed.
Global Error indicator (red)
!
Does not light up when the system is OK. No service incident or
critical event has occurred.
Lights up red when a predictable error has been detected. Users
can check the system and event log or via ServerView for more
detailed information.
Flashes red when a critical event has occurred. Users can check
for event details in the BIOS Setup, the system and event log or
via ServerView.
If the event is still acute after a power failure, the indicator is
activated after the restart.
ID
ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
46
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Starting up and operation
Controls and displays
CD/DVD indicator
Lights up green when the storage medium is being accessed.
Indicators on the HDD module
1
HDD FAULT (red)
(in conjunction with a RAID controller)
–
–
Does not light: no HDD error
Lit: HDD Faulty or Rebuild Stopped (drive defective/needs replacing, a
rebuild process was stopped or the HDD module is not correctly
inserted)
–
Slow flashing: HDD Rebuild (the data is being restored after changing
a hard disk drive)
–
–
–
Fast flashing: HDD Identify
Four fast blinks/pause: HDD Predicted Fault
Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
2
HDD BUSY (green)
–
–
Lights: HDD in active phase
Does not light: HDD inactive (drive inactive)
TX120
Operating Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
Starting up and operation
5.2.2 Rear of server
1
2
3
4
Figure 10: LAN indicators
1 LAN link/Active indicator (standard LAN)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
2 LAN transfer rate indicator (standard LAN)
Lights yellow for a LAN transfer rate of 1 Gbps.
Lights up green for a LAN transfer rate of 100 Mbps.
Does not light up for a LAN transfer rate of 10 Mbps.
3 LAN transfer rate indicator (standard LAN)
Lights up green for a LAN transfer rate of 100 Mbps.
Does not light up for a LAN transfer rate of 10 Mbps.
4 LAN link/active indicator (service LAN)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
48
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Starting up and operation
Switching the server on and off
5.3
Switching the server on and off
V
CAUTION!
If nothing appears on the screen but flickering stripes after switching on
the server, switch the server off immediately (see section “Flickering
The On/Off button does not disconnect the server from the mains. To
disconnect from the mains completely, remove the power plug(s).
Switching the server on
–
Starting up for the first time:
Ê
Insert ServerStart disc 1 in the CD/DVD drive.
Ê
Ê
Follow the on-screen instructions (see also section “Configuring onboard
–
System already installed:
Ê
The server is switched on, performs a system test and boots the
operating system.
TX120
Operating Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the server on and off
Switching the server OFF
Starting up and operation
Ê
Shut down the operating system properly.
The server is automatically switched off. The power-on indicator lights up
orange.
I
If the operating system does not switch the server off automatically,
press the On/Off button for at least four seconds and/or send a corre-
sponding control signal.
Other on/off options
In addition to the On/Off button, the server can be switched ON and OFF in the
following ways:
–
Specified switch on time / switch off time
The server is switched ON or OFF at a time specified in the ServerView
program
–
–
–
Ring indicator
The server is switched on by an internal or external modem.
Wake On LAN (WOL)
The server is switched on by a command via the LAN (Magic Packet).
After power failure
The server automatically reboots following a power failure (depending of the
settings in the BIOS).
–
–
“Power override” function
The server can be switched off immediately by pressing and holding the
On/Off button (approx. 4-5 sec.).
V
CAUTION!
There is a risk that data may be lost.
IPMI
The server is switched on by an IPMI console via serial port COM1 (item 4
50
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Starting up and operation
Configuring the server
5.4
Configuring the server
This section contains information about configuring the server and installing the
operating system.
5.4.1 Configuring onboard SAS controller
The server has an onboard SAS controller with “Integrated Mirroring Enhanced”
functionality. You can configure the Onboard-SAS-Controller either before or
during ServerStart. Using ServerStart is recommended.
I
A separate utility is available to the controller for IME configuration. For
further information, refer to the “Integrated Mirroring User’s Guide” on the
I ServerBooks DVD (select “Controllers” from the menu).
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
5.4.2 Configuration with ServerStart
With the ServerStart Disc 1 provided, you can configure the server and install the
operating system in a convenient manner. Menu-guided configuration includes
server configuration with the SCU and RAID controller configuration with
ServerViewRAID.
The ServerStart advantages
–
–
–
Automatic configuration of your server’s hardware and disk arrays.
Installation assistance for all leading server operating systems.
Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
–
Installation of drivers and additional software.
I
The software that can be installed depends on your server’s hardware
I configuration. This configuration is detected automatically.
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
TX120
Operating Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the server
Starting up and operation
To find out how to operate ServerStart and for further information, refer to the
If you are using ServerStart, you can skip the following section on how to
configure the server and install the operating system. Continue from section
5.4.3 Configuration without ServerStart
Configuring onboard SAS controller
Configure the controller as described in section “Configuring onboard SAS
Operating system installation
Ê
Ê
Ê
Insert the CD/DVD for the operating system you want to install.
Reboot the server.
Follow the instructions on screen and in the manual for the operating
system.
5.5
Cleaning the server
V
CAUTION!
Switch the server off and disconnect the power plugs from the grounded
shockproof sockets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
52
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
6
Property and data protection
6.1
Mechanical access protection
The lock and drive cover can be used to restrict access to the On/Off button and
the drives.
To prevent it being removed from its location, the server can be secured to a
fixed object with a steel cable running through a clip on the back.
6.2
BIOS Setup security functions
The Security menu in the BIOS Setup provides you with various options for
protecting your data from unauthorized access. It allows you to assign access
passwords, or to prevent disks from being written or the BIOS from being
overwritten. By combining these options you can achieve optimum protection for
your system.
I
A detailed description of the Security menu and how to assign passwords
can be found in the “BIOS Setup” documentation on the PRIMERGY
TX120
Operating Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in the “Safety notes and other important
If a fault occurs, attempt to resolve it using the measures described:
–
–
–
in this chapter,
in the documentation for the connected devices,
in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê
Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê
Ê
Switch off the server.
Contact our customer service team.
7.1
Power-on indicator remains unlit
The power-on indicator remains dark after you switch on your device.
Power cable incorrectly connected
Ê
Make sure that the power cable(s) is/are correctly connected to the server
and the grounded socket(s).
Power supply overloaded
Ê
Ê
Disconnect the server power plug(s) from the power socket(s).
Wait a few seconds before you plug it/them into the grounded socket(s)
again.
Ê
Switch on your server.
TX120
Operating Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Server switches itself off
Troubleshooting and tips
7.2
Server switches itself off
Server Management has detected an error
Ê
Check the error list or the ErrorLog file in the ServerView program, and
attempt to eliminate the error.
7.3
Screen remains blank
Monitor is switched off
Switch on your monitor.
Ê
Screen has gone blank
Ê
Press any key on the keyboard.
or
Ê
Deactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
Ê
Set the brightness control on the monitor to light. For detailed information,
refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê
Ê
Switch off the monitor and the server.
Check whether the power cable is properly connected to the monitor and to
the grounded socket.
Ê
Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê
Switch on the monitor and the server.
56
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Troubleshooting and tips
Flickering stripes on monitor screen
7.4
Flickering stripes on monitor screen
V
CAUTION!
Switch off the server immediately. Risk of damaging the server.
Monitor does not support the set horizontal frequency
Ê
Find out which horizontal frequency your monitor screen supports. You will
find the horizontal frequency (also known as line frequency or horizontal
deflection frequency) in the documentation for your monitor.
Ê
Refer to the documentation for your operating system or the software for the
screen controller for details of how to set the correct horizontal frequency for
your monitor, and follow the procedure accordingly.
7.5
No screen display or display drifts
The wrong horizontal frequency or resolution has been selected for the
monitor or for the application program.
Ê
Find out which horizontal frequency your monitor screen supports. You will
find the horizontal frequency (also known as line frequency or horizontal
deflection frequency) in the documentation for your monitor.
Ê
Refer to the documentation for your operating system or the software for the
screen controller for details of how to set the correct horizontal frequency for
your monitor, and follow the procedure accordingly.
TX120
Operating Manual
57
Download from Www.Somanuals.com. All Manuals Search And Download.
No mouse pointer displayed on screen
Troubleshooting and tips
7.6
No mouse pointer displayed on screen
Mouse driver not loaded
Ê
Check whether the mouse driver is properly installed and is activated when
the application program is started. Detailed information can be found in the
user manuals for the mouse, the operating system and the application
program.
Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the
mouse supplied.
Ê
Check in the BIOS Setup that the mouse controller is Enabled.
7.7
Incorrect date and time
Ê
Set the date and time in the operating system or in the BIOS Setup under the
Main menu, using System Date and System Time respectively.
I
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under Linux,
and would overwrite the system time in the default setting on shutdown.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the Technical
Manual for the D2550 system board) or contact our customer service team.
58
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Troubleshooting and tips Drives reported as “dead” when starting system
7.8
Drives reported as “dead” when starting
system
This error message can occur when the onboard SAS controller has RAID
functionality or the server is equipped with a PCI RAID controller.
RAID controller configuration incorrect
Ê
Check and correct the settings for the drives using the RAID controller utility.
Further information is provided in the manual for the RAID controller.
7.9
Added drive reported as defective
RAID controller is not configured for this drive
The drive was probably installed when the system was switched off.
Ê
Reconfigure the RAID controller for the drive using the corresponding utility.
Information is provided in the documentation for the RAID controller.
or
Ê
Remove and reinstall the drive while the system is switched ON.
If the drive continues to be reported as defective, then replace it (see “Installing
7.10 Error message on screen
The meaning of the error message is explained in the manual for the BIOS-Setup
and in the documentation for the relevant components and programs on the
PRIMERGY ServerBooks DVD.
TX120
Operating Manual
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Hot-plug hard disk drives
I
Upgrades, updates and replacement of non-hot-pluggable components
are described in the “Options Guide” or in the service supplement and
V may only be performed by authorized specialist personnel.
CAUTION!
Follow the safety instructions in the chapter “Important information” on
Up to four hot-pluggable hard disk drives can be installed in the PRIMERGY
TX120 server.
The hard disk drives which can be ordered for the PRIMERGY TX120 are
supplied already mounted in an installation frame so that defective hard disk
drives can be replaced and new drives can be added during operation. The
HDD drive and installation frame together make up the HDD module.
This chapter provides you with details of how to handle the HDD modules (see
page 62) and how to install and remove HDD modules on your server (see
page 64).
V
CAUTION!
●
●
The HDD must not be removed from the installation frame by anyone
except a service technician.
The HDD modules (drives) must all be marked clearly so that they
can be put back in their original places after an upgrade. If this is not
done, existing data can be lost.
●
The hot-plug function is only possible in conjunction with a corre-
sponding RAID configuration.
Further information about RAID configuration or the RAID level can
be found in the RAID controller documentation (see “Literature” on
page 77).
TX120
Operating Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling hard disk drives and HDD modules
Hot-plug hard disk drives
8.1
Handling hard disk drives and HDD
modules
Hard disk drives incorporated in the HDD modules are highly sensitive electro-
magnetic devices and must be handled with great care. Incorrect handling can
cause partial or total failure of the hard disk drives. These failures can result in
data errors and to a loss of data or to total corruption of the hard disk drive.
Observe the following rules to prevent such problems occurring:
●
●
●
Only store and transport HDD modules within the limits stipulated in the
specification.
When transporting HDD modules (even over short distances), always use
the original packaging (ESD label).
Never expose HDD modules to a temperature shock. Avoid the formation of
condensation inside and on the outside of the hard disk drive.
V
CAUTION!
The HDD module must be acclimatized in its operating environment
for an acclimatization time before it is started up for the first time.
Temperature difference (°C) Minimum acclimatization time
(operating environment/
outside)
(hours)
5
3
5
10
15
7
20
8
25
9
30
10
Table 2: Acclimatization times for HDD modules
●
Always set the HDD module down carefully, with the large surface facing
downwards to prevent it from tipping over.
62
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hot-plug hard disk drives
Removing/Installing the dummy module
8.2
Removing/Installing the dummy module
Free slots are provided with dummy modules. Remove the dummy module
before installing an additional HDD module.
1
2
1
Figure 11: Removing the dummy module
Ê
Press both tabs on the dummy module together until the locking mechanism
disengages (1).
Ê
Pull the dummy module out of the slot (2).
To install a dummy module, follow the same procedure in reverse order.
V
CAUTION!
Store the dummy module in a safe place. If you have removed an HDD
module and do not install a new one in its place, put the dummy module
back in its place for cooling, to comply with EMC regulations (regulations
regarding electromagnetic compatibility), and for protection against fire.
Ensure that the dummy module engages correctly in the slot.
TX120
Operating Manual
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing/Removing the HDD module
Hot-plug hard disk drives
8.3
Installing/Removing the HDD module
Unlocking the HDD module
2
1
Figure 12: Unlocking the HDD module
Ê
Ê
Release the locking mechanism by pressing the lock together (1).
Push the handle of the HDD module fully in the direction of the arrow (2).
The HDD module is now unlocked.
64
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hot-plug hard disk drives
Installing/Removing the HDD module
Installing the HDD module
2
1
Figure 13: Installing the HDD module
Ê
Ê
Ê
Unlock the HDD module as described in section “Unlocking the HDD
Carefully push the HDD module into the empty mounting location (1) until it
stops.
Push the handle completely in the direction of the arrow (2) until the locking
mechanism engages.
TX120
Operating Manual
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing/Removing the HDD module
Removing the HDD module
Hot-plug hard disk drives
V
CAUTION!
●
Only remove a HDD module during operation if the drive is not
currently being accessed. Observe the control LEDs for the corre-
sponding HDD modules (see “Indicators on the HDD module” on
page 47).
●
Under no circumstances should you remove an HDD module while
the system is in operation if you are not sure whether the hard disk
drive is operated by a RAID controller and belongs to a disk array
which is operating at RAID level 1.
An HDD module can only be replaced during operation in conjunction
with a corresponding RAID configuration.
●
All HDD modules (drives) must be uniquely identified so that they can
be reinstalled in their original mounting locations later. If this is not
done, existing data can be lost.
If you want to remove an HDD module during operation, proceed as follows:
Ê
If you want to remove a HDD module that is not defective, the drive must be
first set to offline via the software (RAID controller configuration software).
Ê
Unlock the HDD module as described in section “Unlocking the HDD
Ê
Ê
Pull the HDD module out a few centimeters.
Wait for at least 60 seconds.
I
This period is necessary for the RAID controller to recognize that an
HDD module has been removed and for the hard disk drive to come
to a stop.
Ê
Pull the HDD module out completely.
66
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Hot-plug hard disk drives
Installing/Removing the HDD module
Ê
Install the new HDD module, as described in “Unlocking the HDD module”
V
CAUTION!
If you have removed an HDD module and do not install a new one in
its place, put the dummy module back in its place for cooling, to
comply with EMC regulations (regulations regarding electromagnetic
compatibility), and for protection against fire. Ensure that the dummy
module engages correctly in the slot.
TX120
Operating Manual
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviations
AC
Alternating Current
ACPI
Advanced Configuration and Power Interface
ANSI
American National Standards Institute
ASR&R
Automatic Server Reconfiguration and Restart
ATA
Advanced Technology Attachments
BIOS
Basic Input-Output System
CC
Cache Coherency
CD
Compact Disk
CD-ROM
Compact Disk-Read Only Memory
CHS
Cylinder Head Sector
CMOS
Complementary Metal Oxide Semiconductor
COM
Communications
CPU
Central Processing Unit
TX120
Operating Manual
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviations
DC
Direct Current
DIMM
DIP
Dual Inline Memory Module
Dual Inline Package
DMA
DMI
Direct Memory Access
Desktop Management Interface
Digital Versatile Disk
DVD
ECC
ECP
Error Checking and Correcting
Extended Capabilities Port
EEPROM
Electrically Erasable Programmable Read-Only Memory
EGB
Elektrostatisch gefährdete Bauteile (components in danger of electro-
static discharge)
EMP
EPP
EMV
Emergency Management Port
Enhanced Parallel Port
Elektromagnetische Verträglichkeit (electromagnetic compatibility)
EPROM
Erasable Programmable Read-Only Memory
70
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Abbreviations
ESD
FAT
FPC
FRU
FSB
GUI
HDD
HSC
HU
ElectroStatic Discharge (elektrostatische Entladung)
File Allocation Table
Front Panel Controller
Field Replaceable Unit
Front Side Bus
Graphical User Interface
Hard Disk Drive
Hot-Swap Controller
Height Unit
I²C
Inter-Integrated Circuit
Input/Output
I/O
ICM
ID
Intelligent Chassis Management
Identification
IDE
Integrated Drive Electronics
TX120
Operating Manual
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviations
IEC
International Electrotechnical Commission
IME
Integrated Mirroring Enhanced
Intelligent Platform Management Interface
integrated Remote Management Controller
Interrupt Request Line
IPMI
iRMC
IRQ
LAN
LBA
LCD
LED
LUN
LVD
LWL
MRL
MMF
Local Area Network
Logical Block Address
Liquid Crystal Display
Light Emitting Diode
Logical Unit Number
Low-Voltage Differential SCSI
LichtWellenLeiter (fiber optic cable)
Manual Retention Latch
Multi Mode Faser
72
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Abbreviations
NMI
Non Maskable Interrupt
NTFS
New Technology File System
NVRAM
Non Volatile Random Access Memory
OS
Operating System
PCI
Peripheral Component Interconnect
Prefailure Detection and Analysing
Portable Data Format
PDA
PDF
POST
PS/2
RAID
RAM
ROM
RSB
RTC
Power ON Self Test
Personal System/2
Redundant Arrays of Independent Disks
Random Access Memory
Read-Only Memory
Remote Service Board
Real Time Clock
TX120
Operating Manual
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviations
RTDS
Remote Test- und Diagnose-System
SAF-TE
SCSI Accessed Fault-Tolerance Enclosures
SAS
SATA
SBE
SCA
SCSI
SCU
SDR
Serial Attached SCSI
Serial Advanced Technology Attachment
Single Bit Error
Single Connector Attachment
Small Computer System Interface
System Configuration Utility
Sensor Data Record
SDRAM
Synchronous Dynamic Random Access Memory
SEL
System Event Log
S.M.A.R.T
Self-Monitoring, Analysis, and Reporting Technology
SMI
System Management Interrupt
System Setup Utility
SSU
74
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Abbreviations
SVGA
USB
VGA
WOL
ZCR
Super Video Graphics Adapter
Universal Serial Bus
Video Graphics Adapter
Wakeup on LAN
Zero Channel RAID
TX120
Operating Manual
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Literature
PRIMERGY server manuals are also available as PDF files on the ServerBooks
DVD. The ServerBooks DVD is part of the PRIMERGY ServerView Suite, which is
supplied with every server.
The current versions of the required manuals may be downloaded for free from
the Internet as PDF files. The overview page showing the online documentation
available on the Internet can be found at the URL: http://manuals.fujitsu-
siemens.com. The server PRIMERGY documentation can be accessed using the
Industry standard servers navigation option.
[1] Safety notes and other important information
[2] Ergonomics
[3] Warranty
[4] Returning used devices
[5] System board D2550 for TX120
Technical manual
[6] BIOS Setup
Description
[7] PRIMERGY TX120 Server
Options guide
[8] Quick Start Hardware - PRIMERGY TX120
Leaflet
[9] Quick Start Software - Quick Installation Guide
Leaflet
[10] PRIMERGY ServerView Suite
ServerStart
User manual
[11] PRIMERGY ServerView Suite
ServerView Installation
User manual
TX120
Operating Manual
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Literature
[12] PRIMERGY ServerView Suite
ServerView S2
Server Management
User manual
[13] PRIMERGY ServerView Suite
ServerView
Server Management
User manual
[14] PRIMERGY ServerView Suite
RemoteView
User manual
[15] ServerView RAID
User manual
[16] PRIMECENTER Rack
Technical manual
[17] DataCenter Rack
Technical manual
[18] 19” rack
Technical manual
[19] LSI SATA Software RAID
User manual
[20] Integrated RAID for SAS
User’s guide
[21] Embedded SATA Software RAID for ICH7R
User’s guide
[22] Integrated Mirroring
User manual
78
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Index
A
configuring onboard SAS
controller 52
accessible drives
CD-RW 11
consumables 30
controls 44
DVD-RW 11
ASR&R 11
D
availability 11
AVR 12
data manipulation
B
BIOS
update 14
drive
C
cables
connecting 42
disconnecting 42
CD drive
“dead” 59
defective 59
DVD drive
slimline 11
cleaning
slimline 11
keyboard 52
monitor 52
E
ECC 11
mouse 52
server 52
components
electrostatic-sensitive devices
(ESD) 27
hardware
software
TX120
Operating Manual
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
error
handling 61
power-on indicator does not
light 55
screen shows flickering
stripes 57
installing/removing 64
I
IME (Integrated Mirroring
Enhanced) 51
ESD (electrostatic-sensitive
devices) 27
indicators
CD 44
DVD 44
hard disk drive active
F
fault
screen shows flickering
stripes 57
features 10
information material, additional
Integrated Mirroring Enhanced
Integrated Mirroring Enhanced
(IME) 51
G
integrated Remote Management
Controller 12
iRMC 12
H
handling 62
K
indicator 47
L
labels 31
80
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
Index
P
service 40
standard 40
ports 40
M
monitor
mouse, no mouse pointer on
screen 58
R
RAID controller is not configured for
N
RemoteView 14
O
operation 43
S
safety 21
SAS controller
overload 13
Integrated Mirroring
TX120
Operating Manual
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
screen
flickering 57
T
security function
server
target group
touch-point 14
U
dimensions 17
indicators 44
installation 35
V
operation 43
ports 40
service 14
transport 29
troubleshooting 55
unpacking 34
ServerView 13
service
server 14
touch-point 14
82
Download from Www.OSopmearnautainlsg.cMoma.nAullaMlanuals Search And Download. TX120
|