OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES
1 Shutter Release Button
2 Red-eye Reduction/
Self-Timer/Remote
Controller Lamp
3 Strap Lug
5
∗
1 (→p.23)
4 Remote Controller
∗
Sensor
5 AF (Auto-Focus) Window
6 Flash
6 (→p.31)
2 (→p.34, 40, 42)
7 AE Light Sensor
7
8 Viewfinder Window
9 Fujinon Lens/ Lens Cover
8
3 (→p.8)
9 (→p.11)
4 (→p.42)
: on the Zoom Date 125SR only
∗
3
Download from Www.Somanuals.com. All Manuals Search And Download.
0 AF Lamp (green)
A Viewfinder Eye-piece
B Film Take-up Spool
C FILM TIP Mark
D Tripod Socket
E Film Chamber
F Film Confirmation
Window
F(→p.18)
G
0(→p.23)
A(→p.7)
G Film Pressure Plate
H Camera Back
I Battery Compartment
Cover Release Knob
J Battery Compartment
Cover
B(→p.19)
C(→p.19)
H(→p.18, 28)
I(→p.9)
J(→p.9)
D
E
4
Download from Www.Somanuals.com. All Manuals Search And Download.
K AF Lamp (green)
L Viewfinder Eye-piece
M Liquid Crystal Display
N Camera Back Lock
O Mid-Roll Rewind Button
P Exposure Mode Button
Q Zoom Button
K (→p.23)
L (→p.7)
R Film Confirmation
Window
S Power Button
Q (→p.22)
T DATE/SEL (Date Select)
Button
M (→p.6)
U Self-timer/Remote
R (→p.18)
S (→p.11)
∗
Control /SET (Date Set)
Button
N (→p.18, 28)
O (→p.29)
T (→p.13,16)
U (→p.39, 41,13,15)
P (→p.31)
: on the Zoom Date 125SR only
∗
5
Download from Www.Somanuals.com. All Manuals Search And Download.
V Red-eye Reduction Flash
Liquid Crystal Display
Mode
W
Back Light Compensa-
tion Flash Mode/
Flash-off Mode/
Flash Charging
X Night Portrait (Slow Sync)
[ (→p.37)
\ (→p.20, 39)
V (→p.34)
Mode
W (→p.36, 23)
∗
Y Remote Control Mode
Z Battery Status
[ Landscape Mode
\ Exposure Counter/Self-
timer Count
] Self-timer Mode
^ Date Display
X (→p.38)
Y (→p.41)
] (→p.39)
Z (→p.12)
^ (→p.13,16)
: on the Zoom Date 125SR only
∗
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewfinder
A : Framing area
Compose the image within this area.
B : AF (Auto-focus) spot
C
Position this spot over the main subject in your picture.
C : Parallax correction guides
When taking pictures at close distances (Closer than 1.5 m/4.9 ft.), use these indi-
cators as a guide when composing your picture. (→p.24)
A
B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. PRELIMINARY STEPS
ATTACHING THE STRAP
Slip the thin cord on the carrying strap through the strap lug on the side of the
camera leaving a loop. Slide the thick part of the strap through this loop and pull
tight. Take up any slack to make sure the strap is securely attached to the camera.
1
2
Do not use a strap made for cellular phones or similar electronic products. These straps are
usually too light or weak to hold your camera securely. For safety, use only straps designed for
cameras.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSERTING THE BATTERY
Your camera requires one 3V lithium battery, type CR123A/DL 123A.
To insert the battery:
1 Move the battery compartment cover release knob in the direction of the arrow.
2 Flip open the battery compartment cover.
1
2
3 Insert the battery following the instructions shown in the diagram on the inside of the
battery compartment cover. Important: Pay careful attention to the polarity of the bat-
tery as indicated by the , and . markings on the battery. The battery must be in-
serted the correct way or the camera will not function.
4
4 When the battery has been inserted correctly, close the battery compartment cover by
pressing it until it snaps into place. If it does not snap into place, do not force it but
recheck the position of the battery to make sure it fits properly.
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not apply excessive force when opening or closing the battery compartment cover.
One new lithium battery should be sufficient for approx. 350 exposures (based on our test conditions).
When traveling, take extra batteries to provide power for extra exposures. This is particularly important if you visit areas where new batteries may
be difficult to obtain.
∗
∗
∗
Check the battery capacity symbol before using your camera. (→p.12)
After changing the battery, reset the date to assure accurate date/time recording. (→p.13)
∗
∗
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING ON YOUR CAMERA
Before you can use your camera, you must turn the power on. First press the power
button which turns on the power. Pressing this button a second time will turn the
power off.
When you turn your camera on, the lens cover will open and the initial display will appear on the
LCD.
☞
When you are finished using your camera, turn the power off to conserve your battery. If the
power supply is left on for more than 7 minutes without the camera being used, the camera will
automatically turn itself off.
∗
Before you turn the camera on, make sure that the lens is not blocked to prevent any interfer-
ence with the lens movement as it extends into its picture-taking position.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING YOUR BATTERY
To determine the condition of the battery in your camera, turn the camera on and
check the battery capacity indicator on the LCD panel.
1
2
3
1 Lit
2 Lit
: Battery capacity is OK.
: Battery capacity is low. Replace with a new battery.
3
Blinks: Shutter cannot be released because battery is exhausted. Replace with
a new battery.
Check the battery capacity before you using your camera.
The battery can be replaced even while there is a partially-exposed film in the camera.
∗
∗
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DATE (YEAR-MONTH-DAY/ HOUR-MINUTE)
Setting the date
1
2
Turn the camera on and then press the DATE button.
The “Year” blinks and the camera will enter the date/time setting mode. You can set:
Year : ’02 to ’32 (2002 to 2032)
☞
Month : 1 to 12
Day : 1 to 31
Time : 0 to 23 hours; 00 to 59 minutes
1 Press the SET button to change the blinking setting.
2 Press the SEL button to select the next part of the date/time information.
Each press of the SEL button selects a different element in the date/time information in the
following order:
☞
Year→Month→Day→Hours→Minutes
1
2
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the date/time setting mode, press the DATE/SEL button after changing
the “Minutes”.
3
To set the time (hour or minute) by the radio, press in the DATE/SEL button when the time
☞
signal indicates zero.
The year, month, and day will change together with the hour and minute.
∗
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the date
1
2
Turn the camera on and then hold down the DATE button for at least 2 seconds or
longer.
The “Day” blinks and the date change mode is entered.
☞
Using the procedure described in steps 2 1 to 2 on page 13, set the date with the
SET and SEL buttons.
Each press of the SEL button selects a different element in the date/time information in the
following order:
☞
Day→Hours→Minutes→Year→Month
Press the DATE/SEL button after changing the “Month”.
☞
1
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE DATE MODE
The date and time (year-month-day/ hour-minute) will be imprinted at the lower right
of the photograph.
The date display printed on the front of the picture may not be clearly visible against a dark
background.
∗
Y : Year M : Month D : Day T : Time
Turn the camera on, and then press the DATE button to enter date/time mode. The
date/time mode changes in the order shown in the illustration.
Y M D
M D Y
D M Y
D T
If “- - - - - -” is chosen, no date will appear on the photograph.
∗
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2. USING YOUR CAMERA
LOADING THE CAMERA
A
Your camera uses standard 35mm film available anywhere. Almost all 35mm films
will have a DX coding symbol on the film box and on the cassette itself. Information
you will see includes:
A : Number of exposures
B : DX code symbol
C : Film speed (sensitivity to light or ISO rating)
B
C
• If non-DX coded film is used, the camera’s automatic exposure system automatically sets itself
to ISO 100.
• Always load and remove film from your camera away from direct sunlight.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that there is not a film in the camera and that the exposure counter is not
displayed.
1
Never open the camera back while film is in your camera. Before replacing the film, refer to
∗
page 29.
1 To load the film, slide camera back lock in the direction of the arrow as shown in
the picture at left.
2 Open the camera back as shown.
2
Never apply excessive force when opening or closing the camera back.
∗
2
1
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert the roll of film. Keep the long end of the spool in the film cassette at the top of
the film compartment as shown in the drawing.
3
4
A : FILM TIP mark
B : Film take-up spool
C : Film cassette
While holding the film cassette in place, pull the end of the film out to the FILM TIP
mark and place it on top of the spool.
Hold the film cassette down so that it does not pop out of the film compartment.
Make sure the end of the film is correctly threaded onto the spool.
If you should pull the film out too far, remove the film cassette and rotate the longer end of the
spool slowly to rewind some of the exposed film and adjust the leader to the correct length to
reach the FILM TIP mark. Be careful not to rewind the leader completely into the cassette.
∗
∗
∗
A
B
C
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Close the camera back.
The film advances automatically.
The type, number of exposures, and speed of the film that has been loaded may be checked
with the film confirmation window.
☞
∗
5
6
Check the exposure counter (telling the number of exposures remaining).
If the film is not loaded correctly, the film counter is not displayed on the LCD. In this case, insert
the film again making sure it is loaded correctly to permit taking pictures.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR CAMERA
Turn the camera on and hold it firmly using both hands as shown in the illustration.
1
2
When taking vertical pictures, hold the camera with the flash unit at the top.
☞
Before taking important, once-in-a-lifetime pictures such as weddings or special events, take a
few test shots to make sure your camera is functioning correctly. If you purchased your camera
before going on a trip, shoot a roll or two to familiarize yourself with the operation of the camera.
And don’t forget to get an extra set of batteries. You should also keep this instruction book with
you for handy reference.
Make sure that nothing is in front of the lens, the flash, the AF (Auto-Focus) win-
dows or the AE (Automatic exposure) light sensor.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the zoom lens, press the
mark until you see the composition you want in
the finder. Pressing the
obtain wide-angle coverage.
mark will set the lens at the shorter focal lengths to
3
4
The focusing range for sharp pictures is from 0.9 m (3.0 ft.) to infinity.
∗
Aim at your subject so that it is covered by the whole AF frame.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Press down the shutter release button halfway.
Focusing is complete when the AF lamp (green) lights up.
If you are closer than 90 cm (35 in.) to the subject, the AF lamp will start blinking to warn you
that the subject cannot be focused. If you are closer than the minimum focusing distance (60
cm / 24 in.), the AF lamp will turn on the camera will not focus on your subject.
☞
5
6
∗
Press the shutter release button down completely.
The film is advanced to the next frame.
The number indicated by the exposure counter decreases by one each time a picture is taken.
The AF lamp and red-eye reduction/self-timer lamp will go off once and reappear immediately
after the shutter is released.
☞
☞
∗
During the charging time of the flash (when the alarm sign is blinking “ ”) the shutter cannot be
released.
∗
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Close-up photography
C
A : Viewfinder
B : Print finishing
C : Parallax correction guides
When photographing a subject that is closer than approx. 1.5 m (4.9 ft.) from the
camera, the area within the frame shown in the diagram on the left will be in the
picture. Compose the picture so that the subject that you want to photograph is
within the frame.
A
C
B
When taking close ups, an area seen through the viewfinder and the area seen by the lens and
actually photographed will be different. This is because the viewfinder and lens are not in the
same position, a difference known as “parallax”. The parallax correction guides indicates the
difference between what the viewfinder sees and what the lens sees when the picture is taken.
A
B
24
Download from Www.Somanuals.com. All Manuals Search And Download.
There are a few conditions when the camera’s autofocus system may not function accurately. At these times, you should use
the “Auto-Focus Lock” settings (→p.26) or the “Landscape Mode” setting (→p.37). Conditions requiring these settings include:
•
•
•
•
•
A bright light source within the picture such as the sun near your subject, a strong light reflection such as from water or from the windshield of a car;
A mirror or other strongly reflective surface near the center of the picture;
Shooting black light-absorbing subjects such as hair;
Presence of flames, smoke or gaseous substances;
Photographing through glass.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTO-FOCUS LOCK
In the composition shown at left, the AF frame is off the subject (in this case, the
people). In this case the lens will not focus on the subject.
1
2
Move the camera to position the AF frame over the subject.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
With the AF frame positioned over the subject, press down the shutter release but-
ton halfway to set the Auto-Focus lock.
3
4
Check that the AF lamp (green) lights up.
☞
While holding the shutter release button halfway down to keep the Auto-Focus lock
on, move the camera back to the original position to recompose your picture, then
press the shutter release button all the way down.
The Auto-Focus lock operation can be repeated any number of times before the shutter trips.
∗
27
Download from Www.Somanuals.com. All Manuals Search And Download.
UNLOADING THE FILM OR REMOVING FILM IN MID-ROLL
1
To Unload the Film
When the last frame in the film has been exposed, the film automatically rewinds
into the film cassette which can then be removed for processing.
When rewinding is complete, the exposure counter will read “ ”.
☞
Before opening the camera back, check that the rewinding is completed and the motor stopped.
At this point, “ ” is displayed. If you don’t take this precaution, the exposed film in the camera
may be exposed to light. (→p.30)
1 Slide the camera back lock in the direction indicated by the arrow.
2 Open the camera back in the direction indicated by the arrow.
3 Remove the film.
2
3
Do not apply unnecessary force to the camera back.
∗
2
1
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing film in mid-roll
Press the button with the point of a pen or something similar.
When rewinding is complete, the exposure counter will read “ ”.
☞
∗
Do not press the
button with any object that tapers to a sharp point.
Check that the motor has stopped and that “ ” is displayed before removing the
film.
Film cannot be reused once it has been rewound. Do not press the
removing the film for developing.
button except when
29
Download from Www.Somanuals.com. All Manuals Search And Download.
☞ Do not open the camera back while there is a film in the camera.
If you open the camera back while a film is loaded in the camera, close the camera back again.
When the camera back is closed, the film is automatically rewound and “ ” is displayed.
Film cannot be reused once it has been rewound.
☞
∗
∗
However, since this camera uses automatic pre-winding, only the last frame taken will be exposed to light should the camera back be opened
accidentally.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3. ADVANCED TECHNIQUES
SELECTING THE EXPOSURE MODE
Your camera offers 6 exposure modes to give you successful pictures under a wide
range of photographic situations with various subjects. These modes are:
(
(
(
(
(
(
) Automatic flash for low light situations
) Red-eye reduction flash for more pleasing pictures of people
) Back light compensation flash mode
) Flash-off mode for natural light pictures
) Landscape mode for pictures of distant subjects
) Night portrait (slow sync) mode for fill-flash pictures
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Each press of the
button changes the exposure mode in the following order:
→
→
→
→
→
☞
• The automatic flash mode and red-eye reduction flash mode are maintained even when the
power is turned off.
• The back light compensation flash mode and flash-off mode are automatically cancelled when
the power in the camera is turned off.
• The landscape mode and night portrait modes are automatically cancelled after a photo is
taken or the camera is turned off.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
The operating range of the film (flash distance) will vary depending upon the film’s sensitivity (ISO speed). When using flash,
keep your subject within the range of the effective flash illumination as indicated in the chart below.
Effective flash range
Film speed
Wide angle
(38 mm)
Telephoto
(125 mm)
0.9 – 3.7 m
0.9 – 2.4 m
3.0 – 7.9 ft.
ISO 100
ISO 400
ISO 800
ISO 1600
3.0 – 12.1 ft.
0.9 – 7.3 m
3.0 – 24.0 ft.
0.9 – 4.8 m
3.0 – 15.7 ft.
0.9 – 10.3 m
3.0 – 33.8 ft.
0.9 – 6.8 m
3.0 – 22.3 ft.
0.9 – 14.6 m
3.0 – 47.9 ft.
0.9 – 9.6 m
3.0 – 31.5 ft.
(Using color negative film)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
(
: no display) Automatic flash at low brightness mode
Used for general photography.
The flash lamp fires automatically when the brightness of the subject is lower than
the predetermined level.
(
) Red-eye reduction flash mode
Reduce red-eye.
The red-eye reduction lamp turns on for approx. 1 second, then the camera takes a
picture when the flash fires.
The AF lamp continues to be lit while the red-eye reduction lamp is lit. Do not move the camera
from the time the AF lamp lights to the time the flash fires.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Dealing with red-eye
When you photograph a person in dim light using flash, the pupil of the eye will sometimes appear red. Under low light, the
pupils of the eye dilate for better vision. Red-eye is caused by light from the flash entering the dilated pupils and being reflected
back to the lens. Red-eye reduction causes a preliminary flash to fire before the actual picture is taken. This causes the pupil
to contract, reducing this reflection. When the actual flash exposure is made, the degree of reflection is minimized, thus
reducing red-eye.
When using red-eye reduction mode
•
•
Ask your subject to look directly into the camera.
Approach as closely as possible to make your exposure.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
(
) Back light compensation flash mode
Use this mode to avoid deep shadows when photographing against the light such as a person
standing in front of a window or under a tree with a very bright background. This produces more
natural looking flash photographs.
Flash pictures taken even in a bright place.
(
) Flash-off mode
Used when taking pictures under normal room lighting or taking pictures of subject beyond flash
range such as in a theatre or a stadium.
The flash stops firing.
When taking pictures under low light, use a tripod whenever possible to avoid unsharp pictures
resulting from camera shake.
∗
36
Download from Www.Somanuals.com. All Manuals Search And Download.
(
) Landscape mode
Used when taking landscape pictures or photographing remote (night) scenes through window
glass.
The lens is focused for the distant subjects. The flash does not fire in this mode.
This mode is automatically cancelled per shot.
When taking pictures under low light, use a tripod whenever possible to avoid unsharp pictures
resulting from camera shake.
∗
∗
37
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Night portrait (slow sync) mode
Used when taking portraits to record the background in a night scene.
The slow shutter speed/red-eye reduction flash mode can be used to make sure
that both people and nighttime background scenery are photographed clearly. (Af-
ter the red-eye reduction lamp has lit for approx. 1 seconds, the flash fires.)
This mode is automatically cancelled per shot.
∗
As a slow shutter speed is used with the night portrait mode, be sure to place your camera on a
tripod to prevent camera shake. It is also important that your subject remain still during the
complete exposure.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SELF-TIMER
1
2
Press the
button.
The self-timer can be used to take up to 3 consecutive exposures.
☞
Each press of the
button changes the self-timer mode in the following order:
☞
→
→
→
“
” indicates the remote control mode. (on the Zoom Date 125SR only)(→p.41)
∗
∗
The exposure modes can also be selected in the self-timer mode.
Compose the picture and press the shutter release button.
The camera focuses on the subject that the AF frame is positioned over, and then the self-timer
starts.
☞
You can select the Auto-Focus lock mode also. (→p.26)
When pressing the shutter release button, do not stand in front of the camera. This may cause a
focusing error or underexposure.
∗
39
Download from Www.Somanuals.com. All Manuals Search And Download.
After the self-timer lamp remains lit for approx. 7 seconds, it blinks for approx. 3
seconds, and then the shutter is released. When taking consecutive exposures, the
shutter is released the set number of times at an interval of between 3 and 6 sec-
onds.
3
• To cancel the self-timer mode after the self-timer has started, press the
button.
• The self-timer mode is automatically cancelled after a photo is taken or the camera is turned
off.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROLLER
1
2
(on the Zoom Date 125SR only)
B
A FUJIFILM remote controller is required.
C
A
Remove the remote controller from its holder by sliding it in the direction of the
arrow.
A : Remote controller holder
B : Transmitter
C : Shutter release button
To replace the remote controller in the holder, slide the remote controller in the direction oppo-
site to the arrow until it clicks into position.
∗
Remote controller is optional. The specific remote controller may be different from the one
shown in the illustration.
∗
Press the
button, until “
” appears on the LCD.
The remote control mode is displayed after the self-timer mode.
The exposure modes can also be selected in the remote control mode.
∗
∗
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Aim the AF Frame at your subject and compose the picture.
3
4
1 Point the remote controller toward the camera’s remote controller sensor, and
then press the remote controller’s shutter release button.
2 After the self-timer/remote controller lamp blinks for approx. 2 seconds, the shut-
ter is released.
The remote control mode is not cancelled after shooting. It is automatically cancelled when the
power is turned off.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
The coverage of the remote controller is up to approx. 5 m (16.4 ft.) when used
directly in front of the camera, and up to approx. 3.5 m (11.5 ft.) when used at a
vertical or horizontal angle of 20°.
A tripod is recommended when taking pictures by remote control.
The remote controller may not work properly when direct sunlight enters the camera’s light
sensor from behind your subject. Use the self-timer in such a case.
∗
3.5 m
(11.5 ft.)
∗
20°
20°
5 m
(16.4 ft.)
3.5 m (11.5 ft.)
Fit the remote controller holder to the camera strap for more convenient handling.
The remote controller holder can be easily opened with a coin.
The battery life is about three years (based on our test conditions). If the remote controller no
longer operates, contact your local retailer where you purchased your camera or our service
center. A replacement battery will be available at nominal cost.
∗
∗
43
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
During operation
Problems
Possible Causes
Solutions
Page
The shutter release won’t 1 “
” symbol is blinking.
1 Replace the battery with a new one.
2 Press the POWER button.
3 The flash is charging. Wait until “ ” stops blinking
and is displayed. (The flash takes approx. 6 sec-
onds to charge.)
12
11
23
trip.
2 Power switch is not on.
3 Is “ ” blinking on the LCD?
4 “ ” is lit on the exposure counter.
4 Remove the film, and load an unexposed film.
17
17
After loading the film and ☞ Did you pull the end of the film out to ☞ Pull the end of the film out to the FILM TIP mark
closing the camera back,
the exposure counter is
not displayed.
the FILM TIP mark when loading the
film?
and correctly load the film.
The film rewound during ☞ Did you move the camera back lock ☞ Be sure not to move the camera back lock while 28,30
photographing.
while a film was loaded?
film is loaded in the camera. When removing the
film, check that the motor has stopped and that
“ ” is displayed before opening the camera back.
After loading a film and ☞ Did you remove film without rewinding ☞ After removing the film, remove the battery, press
28
13
closing the camera back,
the numerals on the expo-
sure counter blink.
it after you began photographing?
the POWER button, and check that the exposure
counter is no longer displayed. Then insert the
battery again.
The self-timer cannot be ☞ Is the date correction mode on?
☞ Cancel the date correction mode.
set.
“ ”is blinking and the shut- ☞ The camera is broken.
☞ Please contact a FUJIFILM authorized distributor.
ter can not be released.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed pictures
Problems
Possible Causes
Solutions
Page
Picture is not sharp.
1 Was your finger on the AF windows 1 When shooting a picture, hold your camera cor-
21
when shooting?
rectly so that your finger is not on theAF windows.
2 Compose the picture in the AF frame and shoot,
or shoot using AF Lock.
2 Did you aim the subject properly?
26
3 Is the lens dirty?
4 Is the camera moving?
3 Clean the lens.
46
21
4 Hold the camera firmly and press the shutter re-
lease button gently. Use a tripod for slow shutter
speeds.
5 You selected
mode when shooting 5 Select a mode other than
mode.
31
33
at a close distance.
Picture is too dark.
1 Subject was too far from the camera 1 Shoot within specified coverage distance of elec-
for flash photography in a dark place.
tronic flash.
2 Was your finger over the flash?
3 Was the subject backlit from being 3 Turn on mode and press the shutter release but-
taken next to a window, etc.? ton.
2 Do not cover the flash with your finger.
21
36
Printed date/time is incor- ☞ You didn’t set correct date and time af- ☞ Set date and time after replacing battery.
rect. ter replacing battery.
13
The date is not printed on 1 Wasn’t “- - - - - -” selected before tak- 1 Select a date mode other than “- - - - - -” before
16
16
the front./The date is not
printed clearly.
ing pictures?
taking pictures.
2 Is there something light-colored (white, 2 Try to arrange that there is nothing light-colored
yellow, orange) where the date ap-
pears?
where the date appears.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMON SENSE CAMERA CARE
Although your camera is designed for many years of service,
It is recommended that undeveloped film and cameras con-
taining film be carried as hand luggage when flying. If included
in checked baggage, X-ray inspections may cause overprint-
ing or other effects.
1
5
6
it is a precision instrument and requires thoughtful handling.
In particular, avoid exposing it to shock, moisture or physical
abuse such as dropping it on the floor.
1 If you use your camera at the beach or in a light rain, pro-
tect it from moisture. Do not let your camera get wet. Be
particularly careful to avoid sand and salt spray at the
beach.
Remove soil and dust from the lens, the AF window and the
finder with an air blower and by wiping lightly with a piece of
soft cloth. If that is not enough, wipe off gently with Lens Clean-
ing Paper, moistened slightly with Lens Cleaning Liquid. Do
not use organic solvents such as alcohol and benzene.
2 Dropping your camera or letting it strike a hard surface
could result in damage even though the camera was in a
case. Never subject the camera to vibration such as in the
trunk of a car. Never keep your camera in the trunk or the
glove compartment of a car: the heat build-up can dam-
age it.
Dust and debris in the film compartment can scratch the film.
Use a blower brush to clean it.
7
Load and remove film away from direct sunlight.
8
9
The operating temperature range of the camera is from –10°C
to +40°C.
Your camera is computer-controlled so it seldom, if ever, will
operate erroneously. If you should experience erroneous op-
eration, remove the battery and then reload it.
2
Since the performance of the battery will drop in cold weather,
warm the battery by placing it inside your garments, etc. be-
fore use. The performance of a battery whose performance
has temporarily dropped can be restored by returning the bat-
tery to normal temperature.
0
If you will not be using your camera for some time, store it
where it will be safe from heat, moisture, dust and harmful
gases such as naphthalene (moth balls and moth flakes).
3
With a few common sense precautions, your camera will give you
years of faithful service, great pleasure and wonderful pictures.
Never store the camera in a closed automobile for an ex-
tended period.
4
46
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
•Film
•Film Speed Setting
•P13ic5tu(3r5e Smimze) DX roll film
•AFiulmtomLaotaicdi(nDgX roll film) for speeds from ISO 50-3200
•2L4enmsm × 36 mm
•AFiulmtomAadtvicance
Fujinon lens, 6 components, 6 elements, f=38 – 125 mm 1:5.3 –
Automatic (motorized), film prewind system, film wind and rewind
system, provision for mid-roll rewinding (Use the mid-roll rewind
•1V:i1e0w.5finder
•bFulattsohn)
Real image zoom finder, 0.41 – 1.10 × magnification, with AF
Zoom flash, approx. 6 seconds recycle time, automatic flash at
low brightness mode, red-eye reduction flash mode, back light
compensation flash mode, flash-off mode, night portrait (slow
sync) mode
•fFraomcues,ipnagrallax correction guides, AF lamp
Active type auto focus, 0.9 m (3.0 ft.) – , with AF lock,
∞
landscape mode (long distance lens position setting, flash off
•RSeeldf--eTyimeererduction flash mode system: LED pre-flash
•sSehtutinttge)r, RAFelelaamspe (on: range OK, blinking: over range alarm)
Electronically controlled, up to 3 consecutive exposures approx.
Programmed electronic shutter release, 1/2 – 1/500 sec. shutter
•L10iqsueidcoCnrdydsetalalyD, icsapnlabye stopped mid-run, self-timer on lamp
•sEpxepeodssure Control
Exposure counter (shows exposures remaining), exposure mode
index, self-timer mode sign, date sign, battery capacity sign, flash
charging sign, remote control mode sign (on the Zoom Date
125SR only).
Automatic
∗
Interlocking range (ISO 100), EV (wide-angle): 10.6 ( 6.1) – 16,
∗
EV (telephoto): 13.8 ( 8.3) – 19.3
∗
( = values for the flash off mode)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
•Power Supply
•OOntheeCrsR123A/DL 123A lithium battery
Date/Time Imprinting, Tripod socket, Remote controller
•D(ciommepnastiibolnes) (&onWtheeigZhotom Date 125SR only).
116.0 × 64.0 × 43.0 mm/4.6 × 2.5 × 1.7 in. (main unit),
195 g/6.9 oz. (without battery)
∗ Specifications are subject to change without notice.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
This product has been developed to be as safe as possible when used for its designed purposes. Under normal circumstances, this
product will provide long, safe service when handled correctly. It is important, however, that this product is handled properly and used only
for photographic purposes. For your convenience and safety, please follow the recommendations listed below. It is also a good idea to
keep this manual in a safe, convenience place where you can refer to it easily if necessary.
WARNING
CAUTION
This symbol indicates a potentially dangerous situation which could This symbol indicates a potentially damaging situation which could
result in serious injury or even death if these instructions are not result in injury to other people or damage to object, if these in-
followed.
structions are not followed and the product is handled improperly.
WARNING
Never attempt to take this part apart. There is a serious danger of a powerful electric shock.
If this product is dropped or damaged so that the interior is exposed, do not touch anything. There is danger of a severe electric
shock.
If the camera or the batteries within become hot, begin to smoke, produce a burning smell or display any sign of abnormal or
unusual condition, remove the batteries immediately. Use gloves to prevent the possibility of burning your hands. Failure to
remove batteries under these conditions could result in burns or even fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight. Take particular care when photographing infants
and young children.
If your camera gets wet or if foreign objects such as pieces of metal get inside, remove the batteries immediate to avoid any
possible heat buildup or of fire starting inside the camera.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Do not use this camera in locations with a high concentration of inflammable gas or near open gasoline, Benzine, paint thinner or
other volatile substances which can give off dangerous vapors. Failure to observe this precaution could result in explosion or fire.
Store your camera out of the reach of infants and young children. Failure could follow this recommendation could result in serious
injury. (For example, the strap could become entwined around their necks with potentially serious consequences.)
Never dismantle the batteries when they are removed from the camera. Do not subject them to heat, throw them into an open fire,
attempt to recharge them or to short circuit them. Failure to follow this recommendation could result in the batteries exploding or
splitting open.
Use only the type of batteries specified in your camera’s instructions. Failure to do so may result in excessive heat buildup or even
in a fire.
Make sure batteries are stored in a safe, secure place well out of the reach of any infants and young children or pets. Improper
store could result in a child swallowing a battery. (If a child does swallow a battery, call a doctor or nearest hospital immediately.)
CAUTION
Never get this product wet or handle it with wet hands. Doing so may result in an electric shock.
Never take flash photographs of people riding bicycles, driving cars or riding a horse. The flash can distract the driver and frighten
the animal, possibly causing a serious accident.
Observe correct polarity when inserting batteries. Never insert batteries with the + and - poles back to front. Failure to observe
correct handling might result in the batteries splitting open and leaking, possibly resulting in fire, burns or damage to surrounding
objects.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
<FUJIFILM ABROAD>
In North America
FUJI PHOTO FILM U.S.A., INC.
555 Taxter Road, Elmsford, N.Y. 10523, U.S.A.
FUJI PHOTO FILM CANADA INC.
275 Britannia Road East, Mississauga, Ontario , L4Z 2E7, Canada
FUJI PHOTO FILM HAWAII, INC.
1650 Kalakaua Avenue, Honolulu, Hawaii 96826, U.S.A.
FUJI PHOTO FILM (EUROPE) G.m.b.H.
In Europe
Heesenstrasse 31, 40549 Dusseldorf, Germany
FUJI PHOTO FILM (U.K.) LTD.
Fuji Film House, 125 Finchley Road, Swiss Cottage, London NW3 6JH, England
FUJI FILM ESPAÑA, S.A.
Aragon, 180, 08011-Barcelona, Spain
FUJI PHOTO FILM DO BRAZIL LTDA.
In South America
Avenida Vereador Jose Diniz No. 3.400, Campo Belo- CEP 04.604
Cx. Postal 9.959., Sao Paulo-SP, Brazil
FUJI PHOTO FILM CO., LTD., HONG KONG OFFICE
Room 916, Sun Plaza, 28 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
FUJI PHOTO FILM (SINGAPORE) PTE. LTD.
In Asia
10 New Industrial Road, Singapore 536201
FUJI PHOTO FILM (THAILAND) LTD.
S.P. Building, 8th Floor, 388 Phaholyothin Road, Bangkok 10400, Thailand
FUJI PHOTO FILM (MALAYSIA) SDN. BHD.
Letter Box 3, 3rd Floor Office Block 1, Crystal Plaza Lot 4, Jalan 51A/223, 46100 Petaling Jaya Selangor Darul Ehsan Malaysia
FUJI PHOTO FILM CO., LTD., TAIPEI OFFICE
Rm. 601, Hung Chong Bldg., No.38, Sec. 6, Min Chuan E. Road, Taipei 11412, Taiwan, Republic of China
FUJI PHOTO FILM CO., LTD., SEOUL OFFICE
Samduck Bldg. 6F., 144-1, Samsung-Dong, Kang Nam-ku, Seoul 135-090, Korea
FUJI PHOTO FILM CO., LTD., BEIJING REPRESENTATIVE OFFICE
Beijing Fortune Bldg. No. 817, 5, Dong Sanhuan Bei-lu, Chaoyang District, Beijing, China 100004
FUJI PHOTO FILM CO., LTD., HO CHI MINH OFFICE
29-31 Ton That Thiep St., Q.I Ho Chi Minh City, Vietnam
FUJI PHOTO FILM CO., LTD., NEW DELHI OFFICE
Le Meridian Commercial Tower 8F Janpath, New Delhi 110001, India
FUJI PHOTO FILM CO., LTD., SYDNEY REPRESENTATIVE OFFICE
c/o Hanimex Pty. Limited, Old Pittwater Road, Brookvale, N.S.W. 2100, Australia
FUJI PHOTO FILM CO., LTD., DUBAI OFFICE
In Oceania
In Middle East
No. 4G-17, L.O.B. No. 4, P.O. BOX 17212, Jebel Ali, Dubai, U.A.E.
FGS-103112-Ci-01
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|