All about the
Use&Care
of your Refrigerator
TABLE OF CONTENTS
Important Safety Instructions.................................2
Features at a Glance..............................................4
Installation ...........................................................5
Door Removal Instructions.....................................9
Installing Door Handles........................................11
Connecting Water Supply.....................................13
Controls..............................................................14
Automatic Ice Maker............................................16
Storage Features.................................................17
Storing Food and Saving Energy...........................20
Normal Operating Sounds and Sights....................21
Changing the Filter..............................................22
Care and Cleaning...............................................24
Before you Call....................................................27
Major Appliance Warranty....................................29
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
prong receptacle. The receptacle must be installed in
accordance with local codes and ordinances. Consult
a qualified electrician. Avoid connecting refrigerator
to a Ground Fault Interrupter (GFI) circuit. Do not
use an extension cord or adapter plug.
Child Safety
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the
refrigerator is unpacked. Children should NEVER
use these items to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap may become
airtight chambers, and can quickly cause suffocation.
• If the power cord is damaged, it should be replaced by
an authorized service technician to prevent any risk.
• Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Proper Disposal of your Refrigerator
or Freezer
Risk of child entrapment
• Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators or freezers are still
dangerous – even if they will sit for “just a few days”. If
you are getting rid of your old refrigerator or freezer, please
follow the instructions below to help prevent accidents.
• Performance may be affected if the voltage varies
by 10% or more. Operating the refrigerator with
insufficient power can damage the compressor. Such
damage is not covered under your warranty.
• Do not plug the unit into an electrical outlet
controlled by a wall switch or pull cord to prevent the
refrigerator from being turned off accidentally.
Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/
disposal methods. Check with your utility company or
recycling your old refrigerator.
IMPORTANT
Before you throw away
your old refrigerator/
freezer:
Pressing and holding the On/Off button for three
seconds, located on the left side of the temperature
control panel will disable your refrigerator’s cooling
system, but does not disconnect the power to the light
bulb and other electrical components. To turn off power
to your refrigerator you must unplug the power cord
from the electrical outlet.
• Remove doors.
• Leave shelves in place
so children may not
easily climb inside.
• Have refrigerant
removed by a qualified
service technician.
Grounding type wall receptacle
Do not, under
any circumstances,
cut, remove,
IMPORTANT
CFC/HCFC Disposal
or bypass the
grounding prong.
Your old refrigerator may have a cooling system
that used CFCs or HCFCs (chlorofluorocarbons or
hydrochlorofluorocarbons). CFCs and HCFCs are
believed to harm stratospheric ozone if released to the
atmosphere. Other refrigerants may also cause harm to
the environment if released to the atmosphere.
If you are throwing away your old refrigerator, make
sure the refrigerant is removed for proper disposal
by a qualified technician. If you intentionally release
refrigerant, you may be subject to fines and imprisonment
under provisions of environmental legislation.
Power cord with
3-prong grounded plug
CAUTION
Electrical information
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
• The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., 15 Amp, AC only
electrical outlet. The power cord of the appliance is
equipped with a three-prong grounding plug for your
protection against electrical shock hazards. It must
be plugged directly into a properly grounded three
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AT A GLANCE
*Features may vary according to model
Water
Filter
Flipper Guide
*LED Cluster Light
*LED Cluster Light
Dairy
Compartment
Air Filter
SpillSafe™
Shelf
*LED Cluster Light
*LED Cluster Light
Slide Under
Shelf
Flipper Mullion
*LED Cluster Light
Crisper Drawer
Deli Drawer
*LED Cluster Light
Crisper Drawer
Door Bin
Freezer Baskets
Toe Grille
Adjustable
Hinges
*Ice Maker
Ice Bin
IMPORTANT
Features not included with your refrigerator can be purchased at
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Required Tools
You will need the following tools:
Components Provided:
Tools Necessary:
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
(OR)
OR
OR
AND
Lower
Hinge
Screw
Top
Hinge
Screw
Phillips™
Head or
Socket
Wrench Set
Adjustable
Wrench
3/8" Fixed
Wrench
#2 Square Drive
Head
This Use & Care Guide provides general installation and
operating instructions for your model. We recommend
using a service or kitchen contracting professional to
install your refrigerator. Use the refrigerator only as
instructed in this Use & Care Guide. Before starting the
refrigerator, follow these important first steps.
Installation
• Allow the following clearances for ease of installation, proper
air circulation, and plumbing and electrical connections:
3
Sides & Top
Back
/8 inch (9.5 mm)
1 inch (25.4 mm)
Location
NOTE
• Choose a place that is near a grounded, non-GFCI,
electrical outlet. Do Not use an extension cord or an
adapter plug.
If your refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.
• If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher, or
other heat sources.
Door opening
Your refrigerator should be positioned to allow easy
access to a counter when removing food. For best use of
refrigerator drawers and freezer baskets, the refrigerator
should be in a position where both can be fully opened.
•
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models
equipped with an automatic ice maker.
CAUTION
Do Not install the refrigerator where the temperature
will drop below 55°F (13°C) or rise above 110°F
(43°C). The compressor will not be able to maintain
proper temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To level the cabinet using the front rollers
(select models):
Leveling Freezer Drawer (if necessary)
1 Check gasket seal around top, bottom, and sides of
1 Slightly open freezer drawer. Lift the toe grille and
freezer drawer.
gently pull forward (see illustration).
2 If gasket is not sealed, open drawer and slightly
loosen four drawer screws (two on each side) to
allow drawer to rotate.
2 You can raise or lower each door. Use a
inch
⅜
socket wrench to turn the adjustment screws (one
per side).
3 Close drawer and recheck the seal on the gasket
(A). Open the drawer grabbing by the sides in the
center (B). Be careful not to rotate the drawer.
Toe Grille Must
Fit in Slot on
Anti-tip Bracket
Remove Hex
Head Drawer
Screw
Remove Hex
Head Drawer
Screw
Screw/Washer
Assembly
Do Not Remove
Other Screws
Do Not Remove
Other Screws
(3) Retaining Clips
Remove Hex
Head Drawer
Screw
Remove Hex
Head Drawer
Screw
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw counterclockwise.
4 Tighten four drawer screws.
5 Recheck gasket seal.
3 Ensure both doors are bind-free with their seals
touching the cabinet on all four sides and that
cabinet is stable.
4 After unit is leveled, lower anti-tip leg until it
Grab Drawer
At Center
contacts the floor.
From Both Sides
Then
Push Against
Freezer Drawer
Pull Drawer Out
Door
Door
A
B
Level Refrigerator & Adjust Doors
(if necessary)
Guidelines for final positioning of your refrigerator:
Raise
•
All four corners of the cabinet must rest firmly on
the floor.
Anti-tip
Leg
• The sides should tilt ¼ inch (6 mm) from front to
Lower
back (to ensure that doors close and seal properly).
• Doors should align with each other and be level.
Most of these conditions can be met by raising or
lowering the adjustable front rollers.
5
Install the toe grille by fitting into place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To adjust the door stop:
5 Retighten screw.
Door stop is adjustable between 85 to 145 degrees.
NOTE
Rotate
Door
Stop
View shown is looking up at the bottom of the
refrigerator door.
Re-tighten
Screw
Door
Lower
Stop
Hinge
Retighten Screw
Min
Open
6 Ensure door stops in desired location before
Screw
resuming normal use.
To level the doors using the adjustable lower
hinge (select models):
Max
Open
1 Remove all food items from door bins on door
Adjustable Door Stop
being adjusted.
1 Open door to provide access to screw.
2 Loosen screw.
2 Open doors to 90 degrees.
3 Loosen or remove screw.
3 Adjust door to desired location.
Loosen or Remove
B
Screw
A
Open
Door
90
Degrees
Rotate
Door to Desired
Location
Bottom of Door
Loosen/Remove Screw (where applicable)
Adjusting Door
4 Rotate door stop until it makes contact with the
NOTE
lower hinge.
Adjustable hinge should only be used after doors have
been leveled with rollers.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
4 Lift the door while adjusting the washer. To raise
the door, rotate washer clockwise (when viewed
from the bottom). To lower door, rotate washer
counterclockwise (when viewed from the bottom).
2 Adjust flipper mullion height. For proper connection
with the flipper mullion guide, there should be a
separation about the thickness of a coin (0.060 inches,
or 1.5 mm) between the guide and flipper mullion.
Mullion
Guide
Flipper
Mullion
Lower
Door
Thickness
of a Coin
Raise
Hinge
Door
Washer
Adjusting Flipper Mullion Height
Raising/Lowering Door
3 Retighten screw.
To adjust the flipper mullion:
1
Loosen the screw located on the flipper mullion hinge.
Flipper
Mullion
Screw
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL INSTRUCTIONS
To remove the refrigerator doors:
Getting through narrow spaces
1 Trace lightly around the door’s top hinges with a
If your refrigerator will not fit through an entrance area, you
can remove the doors. Check first by measuring the entrance.
pencil. This makes reinstallation easier.
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged
from the wall outlet.
2 Open the freezer drawer and remove the toe grille
(see “Installation” section).
3 Remove any food from the door shelves and close
the doors.
To remove the top hinge covers:
1 Remove the two screws from each cover over the
top door hinges.
2 Lift inside edge of hinge cover and tilt back.
2 Disconnect the harness by grasping both sides of
the connector firmly, depress the latch, and pull
apart. Remove the two screws from the top hinge.
Lift the door off of the bottom hinge and set it aside.
Front
Cover Screw
Rear
Cover
Screw
Top Hinge
Cover
Hinge
Screws
Ground
Screw
Multi-wire
Cables
Top
Hinge
Leave
Hinge
With
Door
Front
Cover Screw
Rear
Cover
Screw
Top Hinge
Cover
Hinge
Ground
Screw
Top
Hinge
Screws
Two Wire
Cables
Leave
Hinge
With
Door
NOTE
DO NOT remove the ground screw from hinge.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL INSTRUCTIONS
Installing Freezer Drawer
NOTE
1 With lower slides pulled out, hang drawer onto
slide brackets ensuring pins on each side are fully
inserted into slots on each side.
You will be pulling approximately three feet of water
tube from the back of the refrigerator.
4 Unscrew the three lower hinge screws and hinge
if necessary.
Drawer
Assembly
To reinstall the right door, reverse the above steps.
Fully Extend
Drawer Slides
Lower Hinge Removal
Pin
Cabinet
Slot
2 Reinstall four drawer screws (two per side), tighten
down, and close drawer (C).
Once both doors are in place, ensure they are aligned
with each other and level (Please see the “Installation”
section for more details), and replace the top hinge cover.
Install Screws
(2) Each Side
CAUTION
Be sure doors are set aside in a secure position where
they cannot fall and cause personal injury, or damage
to the doors or handles.
3 Check gasket seal around top, bottom, and sides of
freezer drawer.
Removing Freezer Drawer
4 If gasket is not sealed, open drawer and slightly
loosen four drawer screws (two on each side) to
allow drawer to rotate.
1 Open freezer drawer.
2 Remove drawer screws on right and left sides (two
screws on each side).
5 Close drawer and recheck the seal on the gasket
(A). Open the drawer grabbing by the sides in the
center (B). Be careful not to rotate the drawer.
Remove Hex
Head Drawer
Screw
Remove Hex
Head Drawer
Screw
Do Not Remove
Other Screws
Do Not Remove
Other Screws
Grab Drawer
At Center
From Both Sides
Push Against
Freezer Drawer
Then
Pull Drawer Out
Remove Hex
Head Drawer
Screw
Remove Hex
Head Drawer
Screw
A
B
CAUTION
Drawer is heavy. Use caution when lifting.
6 Tighten four drawer screws.
7 Recheck gasket seal.
3 Lift drawer up and out to remove.
8
Install the toe grille by fitting into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING DOOR HANDLES
Door Handle Mounting Instructions for Frigidaire Gallery®
1 Remove handles from carton and any other protective packaging.
2 Position fresh food handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into door,
ensuring the holes for the set screws are facing towards the opposite door.
3
4
While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench.
Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door.
5 Position freezer handle end over left and right pre-installed handle mounts that are fastened to the door, ensuring
the holes for the set screws are facing down.
6
While holding handle firmly against door, loosely tighten far right Allen set screw (B) with supplied Allen wrench until there is
no gap between handle and door.
7 Still holding the handle firmly to the door, firmly tighten far left Allen set screw (B) with supplied Allen wrench.
8 Return to the far right Allen set screw (B) and firmly tighten with supplied Allen wrench.
NOTE
All set screws should be tightened so the screw is below the surface of the handle. The handles should be drawn
tight to freezer and refrigerator doors with no gaps. Opening the opposite door while tightening the Allen screw
makes installation easier.
The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on
the handles.
Mounting Refrigerator Handles
Mounting Freezer Handle
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION
when installing these handles.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING DOOR HANDLES
Door Handle Mounting Instructions for Frigidaire Professional®
1 Remove handles from carton and any other protective packaging.
2 Position fresh food handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into door,
ensuring the holes for the set screws are facing towards the opposite door.
3
4
While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench.
Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door.
5 Position freezer handle end over left and right pre-installed handle mounts that are fastened to the door, ensuring
the holes for the set screws are facing down.
6
While holding handle firmly against door, loosely tighten far right Allen set screw (B) with supplied Allen wrench until there is
no gap between handle and door.
7 Still holding the handle firmly to the door, firmly tighten far left Allen set screw (B) with supplied Allen wrench.
8 Return to the far right Allen set screw (B) and firmly tighten with supplied Allen wrench.
9 Firmly tighten the inside Allen set screws.
NOTE
All set screws should be tightened so the screw is below the surface of the handle. The handles should be drawn
tight to freezer and refrigerator doors with no gaps. Opening the opposite door while tightening the Allen screw
makes installation easier.
The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on
the handles.
Mounting Refrigerator Handles
Mounting Freezer Handle
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION
when installing these handles.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE WATER SUPPLY
To Connect Water Supply Line To Ice Maker Inlet Valve
WARNING
1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket.
Turn ON water supply and flush supply line until
water is clear. Turn OFF water supply at shutoff valve.
3. Remove plastic cap from water valve inlet and
discard cap.
To avoid electric shock, which can cause
death or severe personal injury, disconnect
the refrigerator from electrical power before
connecting a water supply line to the refrigerator.
4. If you use copper tubing - Slide brass
compression nut, then ferrule (sleeve) onto water
supply line. Push water supply line into water
valve inlet as far as it will go (¼ inch/6 mm). Slide
ferrule (sleeve) into valve inlet and finger tighten
compression nut onto valve. Tighten another half
turn with a wrench; DO NOT overtighten. See
Figure 1.
CAUTION
To Avoid Property Damage:
• Copper or Stainless Steel braided tubing is
recommended for the water supply line. Water
supply tubing made of ¼ inch plastic is not
recommended to be used. Plastic tubing greatly
increases the potential for water leaks, and the
manufacturer will not be responsible for any
damage if plastic tubing is used for the supply line.
If you use stainless steel tubing - The nut and
ferrule are already assembled on the tubing. Slide
compression nut onto valve inlet and finger tighten
compression nut onto valve. Tighten another half
turn with a wrench; DO NOT overtighten. See
Figure 2.
• DO NOT install water supply tubing in areas
where temperatures fall below freezing.
• Chemicals from a malfunctioning softener
can damage the ice maker. If the ice maker
is connected to soft water, ensure that the
softener is maintained and working properly.
5. With steel clamp and screw, secure water
supply line (copper tubing only) to rear panel of
refrigerator as shown.
6. Coil excess water supply line (copper tubing only),
about 2½ turns, behind refrigerator as shown and
arrange coils so they do not vibrate or wear against
any other surface.
IMPORTANT
Ensure that your water supply line connections comply
with all local plumbing codes.
7. Turn ON water supply at shutoff valve and tighten
any connections that leak.
8. Reconnect refrigerator to electrical power source.
Before Installing The Water Supply Line, You Will Need:
•
Basic Tools: adjustable wrench, flat-blade screwdriver,
and PhillipsTM screwdriver
Plastic Water Tubing
to Ice Maker
Plastic water tubing
to ice maker
fill tube
• Access to a household cold water line with water
Steel
Clamp
Steel
Clamp
pressure between 30 and 100 psi.
Fill Tube
• A water supply line made of ¼ inch (6 mm) OD, copper
or stainless steel tubing. To determine the length of
tubing needed, measure the distance from the ice
maker inlet valve at the back of the refrigerator to
your cold water pipe. Then add approximately 7 feet
(2.1 meters), so the refrigerator can be moved out for
cleaning (as shown).
• A shutoff valve to connect the water supply line to
your household water system. DO NOT use a self-
piercing type shutoff valve.
Brass
Compression
Nut
Stainless
Steel
Ferrule
(Sleeve)
water Line
Copper
water Line
Water Valve
Bracket
Water Valve
Bracket
Valve Inlet
Valve Inlet
Water Valve
Water Valve
•
Do not reuse compression fitting or use thread
Copper water line from
household water supply
seal tape.
6 ft. Stainless Steel water line
from household water supply
• A compression nut and ferrule (sleeve) for connecting a
copper water supply line to the ice maker inlet valve.
(Include enough tubing in loop to allow
moving refrigerator out for cleaning.)
Figure 1
Figure 2
NOTE
Check with your local building authority for
recommendations on water lines and associated
materials prior to installing your new refrigerator.
Depending on your local/state building codes, Frigidaire
recommends for homes with existing valves its Smart
Choice® water line kit 5305513409 (with a 6 ft. Stainless
Steel Water Line) and for homes without an existing
valve, Frigidaire recommends its Smart Choice® water
line kit 5305510264 (with a 20 ft. Copper Water Line
with self-tapping saddle valve). Please refer to
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
IQ-TouchTM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice
water filter
C/F
Increases the production of ice
Press and hold for three seconds to reset after filter change.
Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp display and tones
to their factory default settings.
Power on-off
Press and hold for three seconds to turn off the cooling system to
clean the refrigerator. It also turns off the ice maker. The temperature
displays will read OFF.
Energy Saver Keep this switch set on energy saver (light on) for lowest energy
usage. If moisture appears on the cabinet between the doors,
pressing this button will turn the light off and enable an electric heater
used to reduce moisture on the cabinet between the doors.
IMPORTANT
Pressing the system on-off icon does not turn off power to your refrigerator. You
must unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time out
after 10 seconds and return to the basic display.
Alarms
Door Ajar
If the door has been left open for an extended period of time, an
alarm will sound and the door ajar indicator will display on the bot-
tom display of the control panel. The alarm is turned off by closing the
door. The mute sounds key will blink to prompt the reset of any active
alarms. Press this key to reset any system alarms.
High Temp
In the event of a high temperature condition, the temperature display
will blink and display “HI”. After 20 minutes, the alarm will sound and
the high temp indicator will be red on the bottom of the control pan-
el. The mute sounds icon will illuminate until pressed, acknowledg-
ing the alarm, at which time the highest temperature reached will be
displayed and the refrigerator will resume normal operation. In case
the high temp alarm is not acknowledged at the first alarm sound time
out, when the door is first opened, the alarm sound will be repeated.
Power Fail
In the event of a power failure, the power fail alert will be displayed
and the temperature display will blink until the mute sounds icon is
pressed, acknowledging the alarm. Other modes may be turned off
until the alarm is acknowledged. The power fail alert is turned off
and the refrigerator will resume normal operation. The high temp
alarm may also be illuminated until a safe operating range
temperature has been reached.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
IQ-TouchTM “Sabbath Mode”
The Sabbath Mode is a feature that disables portions
of the refrigerator and its controls in accordance with
observance of the weekly Sabbath and religious holidays
within the Orthodox Jewish community.
Sabbath Mode is turned ON and OFF by pressing
and holding both the freezer “∨” and refrigerator “∧”
indicators for five seconds. The display shows “Sb” while
in Sabbath mode.
In the Sabbath Mode, the High Temp alarm is active for
health reasons. If a high temperature alarm is activated
during this time, for example due to a door left ajar, the
alarm will sound intermittently for about 10 minutes.
The alarm will then silence on its own and a red high
temperature icon will display. The high temp icon will
continue to display, even if the door is closed, until
the Sabbath mode is exited and the icon reset. The
refrigerator will function normally once the door is closed,
without any violation of the Sabbath/Holidays.
For further assistance, guidelines for proper
usage and a complete list of models with
the Sabbath feature, please visit the web at
NOTE
While in Sabbath Mode, neither the lights nor the control
panel will work until Sabbath Mode is deactivated.
Refrigerator stays in Sabbath Mode after power failure
recovery. It must be deactivated with the buttons on
the control panel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOMATIC ICE MAKER (select models)
• The following sounds are normal when the ice maker
Ice maker operation & care
is operating:
After the refrigerator is installed properly, the ice maker
can produce ice within 24 hours. It can completely fill an
ice bin in about three days.
- Motor running
- Ice dropping into ice bin
- Water valve opening or closing
- Running water
When using the ice maker for the first time and in order
for the ice maker to work properly, it is necessary to
clear air from water filter tubing. Once ice maker begins
making ice, allow the bucket to fill completely, then
discard the first TWO FULL buckets of ice. It will take at
least two days to completely fill the bucket on regular ice
making mode or 1½ days on fast ice mode.
•
Ice cubes stored too long may develop an odd flavor.
Empty the ice bin as explained below.
Quick Ice Function
Your refrigerator is equipped with a Quick Ice Function, that
increases ice production. This function terminates automatically.
The ice maker produces approximately four pounds of ice
every 24 hours depending on usage conditions.
Cleaning the ice maker
IMPORTANT
CAUTION
Your ice maker is turned on at the factory so it can
work as soon as you install your refrigerator. If you
cannot connect a water supply, lift the ice maker’s wire
signal arm to turn it off. Otherwise, the ice maker’s
fill valve may make a loud chattering noise when it
attempts to operate without water.
If the water supply to your refrigerator is softened, be
sure the softener is properly maintained. Chemicals
from a water softener can damage the ice maker.
Clean the ice maker and ice bin at regular intervals,
especially prior to vacation or moving.
Turning the ice maker on and off
1 Turn off the ice maker.
2 Remove the ice bin.
Ice production is controlled by lifting/lowering the ice
maker’s wire signal arm. To gain access to the ice
maker, pull the freezer drawer out. Lift the wire signal
arm to turn the ice maker OFF and lower the wire signal
arm to turn it ON.
3 Empty and carefully clean the ice bin with mild
detergent. Do not use harsh or abrasive cleaners.
Rinse with clean water.
4 Allow the ice bin to dry completely before replacing
in the freezer.
5 Replace the ice bin. Turn the ice maker on.
Remove and empty the ice bin if:
• An extended power failure (one hour or longer) causes
ice cubes in the ice bin to melt and freeze together.
Remove the ice bin and shake to loosen the cubes or
clean as explained above.
CAUTION
Wire
Signal Arm
NEVER use an ice pick or similar sharp instrument to
break up the ice. This could damage the ice bin and
dispenser mechanism.
To loosen stuck ice, use warm water. Before replacing
the ice bin, make sure it is completely dry.
Ice maker tips
• If your refrigerator is not connected to a water supply
or the water supply is turned off, turn off the ice
maker by lifting wire signal arm.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE FEATURES
CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change. Allow the glass shelves to stabilize
to room temperature before cleaning. Do not wash
in dishwasher.
NOTE
Features may vary according to model.
Your refrigerator includes SpillSafeTM glass shelves that
are designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food
compartments to suit your needs. The shelves have
mounting brackets that attach to slotted supports at the
rear of each compartment.
To change the position of a shelf:
1 Remove all food from the shelf.
Slide-Under Shelf
2 Lift the front edge up and pull the shelf out.
Drawers
3 Replace by inserting the mounting bracket hooks
into the desired support slots.
Your refrigerator includes a variety of storage drawers.
These drawers are located in fixed positions at the
bottom of the fresh food compartment.
4 Lower the shelf and lock into position.
Shelf features
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.
SpillSafeTM Shelf
Opening Crisper Drawer
17
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE FEATURES
Crisper humidity control
Doors
Crisper drawers include a sliding control for adjusting the
humidity inside the crisper. Leafy vegetables keep best
when stored with the Humidity Control set on Higher
Humidity. Fresh fruits keep best when stored with the
Humidity Control set on Lower Humidity.
Storage bins
The doors to your fresh food compartment use a system
of modular storage bins. All of these bins are removable
for easy cleaning. Some of them have fixed positions,
while others can be adjusted to your needs.
Vegetables
Fruits
Door bins are ideal for storing jars, bottles, cans, and
large drink containers. They also enable quick selection of
frequently used items.
Humidity Control
To change the position of an adjustable door bin:
1 Remove all food from the door bin.
Higher
Humidity
Lower
Humidity
2
Grip the bin firmly with both hands and lift
it upward.
3 Remove the bin.
Adjusting Crisper Humidity
4 Place the bin just above desired position.
5 Lower the bin onto supports until locked in place.
To remove the Crisper Drawer for cleaning:
1 Pull the drawer out until it stops.
2 Lift the front slightly and remove the drawer.
Removing Crisper Drawer
Adjustable Door Bin
Deli drawer
Ideal for storage of deli meats and cheese.
6 Place bin liner into bin.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE FEATURES
To Remove Lower Basket
Accessories (varies by model)
Dairy compartment
Use the dairy compartment,
at the top of the fresh food
compartment door, for short-
term storage of cheese,
spreads, or butter. The dairy
compartment is designed to
be warmer than the open
area and includes a lift-up
cover and a dairy divider
Dairy Compartment
(select models).
Basket
Retainer
Removing Lower Basket
Freezer Features (varies by model)
1 Remove all items from basket.
Stabilizer Bar
2 Remove the basket by tilting it forward and lifting it
from the retainer clips.
To reinstall lower basket, insert basket into retainer clips.
Dividers Removal
Lift up on the front of the middle divider and pull out.
Middle Basket
Divider
Basket
Retainer
Clips
Retainers
Two Freezer Baskets
To Remove Upper Basket
1 Remove all items from basket.
2 Remove basket by pulling baskets out to their full
extension and lift out.
Stabilizer
Bar
Middle Basket Divider
Lift up on the rear of the lower divider and pull out.
Lower Basket
Divider
Removing Upper Basket
To reinstall upper basket, position basket onto the
retainer clips making sure the front of the basket rests in
the retainer clips on the stabilizer bar.
Lower Basket Divider & Spill Guard Tray
NOTE
NOTE
If basket is not resting on stabilizer bar retainer clips,
the drawer will not close properly.
Spill Guard Tray should be hand washed in warm water.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING FOOD AND SAVING ENERGY
• Avoid adding too much warm food to the freezer at
Ideas for storing foods
Fresh food storage
one time. This overloads the freezer, slows the rate of
freezing, and can raise the temperature of frozen foods.
• Keep the fresh food compartment between 34° F and
• Leave a space between packages, so cold air can circulate
40° F with an optimum temperature of 37° F.
freely, allowing food to freeze as quickly as possible.
• Avoid overcrowding the refrigerator shelves, which
Ideas for saving energy
reduces air circulation and causes uneven cooling.
Installation
Fruits and vegetables
• Store fruits and vegetables in crisper drawers, where
trapped moisture helps preserve food quality for
longer time periods.
• Locate the refrigerator in the coolest part of the
room, out of direct sunlight, and away from heating
ducts or registers.
• Do not place the refrigerator next to heat-producing
appliances such as a range, oven, or dishwasher.
If this is not possible, a section of cabinetry or an
added layer of insulation between the two appliances
will help the refrigerator operate more efficiently.
• Wash items and remove excess water.
• Wrap any items that have strong odors or high
moisture content.
Meat
• Level the refrigerator so that the doors close tightly.
• Wrap raw meat and poultry separately and securely
to prevent leaks and contamination of other foods
or surfaces.
Temperature settings
• Refer to the “Controls” section for procedures on
• Use the deli drawer to store meat/poultry for short-
term storage. Any meat to be kept longer than two
days should be frozen.
temperature settings.
Food storage
• Avoid overcrowding the refrigerator or blocking cold
air vents. Doing so causes the refrigerator to run
longer and use more energy.
Frozen food storage
• Keep the freezer compartment at 0° F or lower.
•
A freezer operates most efficiently when it is at least
⅔ full.
• Cover foods and wipe containers dry before placing
them in the refrigerator. This cuts down on moisture
build-up inside the unit.
Packaging foods for freezing
• Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and
close the door as soon as possible.
• To minimize food dehydration and quality
deterioration, use aluminum foil, freezer wrap,
freezer bags, or airtight containers. Force as much air
out of the packages as possible and seal them tightly.
Trapped air can cause food to dry out, change color,
and develop an off-flavor (freezer burn).
• Do not place a hot container directly on a cold shelf.
Remember, such an extreme temperature change
may damage the glass.
• Wrap fresh meats and poultry with suitable freezer
wrap prior to freezing.
• Do not refreeze meat that has completely thawed.
Loading the freezer
• Prior to grocery shopping, activate “quick freeze”
so that on your return you can ensure your newly
purchased food designated for the freezer will be
preserved as quickly as possible.
• Activating “quick freeze” also will help your freezer
more efficiently maintain the selected temperature
after placing new purchases with pre-existing
frozen foods.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL OPERATING SOUNDS AND SIGHTS
Understanding the sounds you
NOTE
may hear
Energy efficient foam in your refrigerator is not a
Your new, high-efficiency refrigerator may introduce
unfamiliar sounds. These sounds normally indicate
your refrigerator is operating correctly. Some surfaces
on floors, walls, and kitchen cabinets may make these
sounds more noticeable.
sound insulator.
NOTE
During automatic defrost cycle, a red glow in the back
wall vents of your freezer compartment is normal.
The following is a list of major components in your
refrigerator and the sounds they can cause:
A Evaporator Refrigerant through the evaporator
may create a boiling or gurgling sound.
B Evaporator fan You may hear air being forced
through the refrigerator by the evaporator fan.
C Defrost heater During defrost cycles, water
dripping onto the defrost heater may cause a
hissing or sizzling sound. After defrosting, a
popping sound may occur.
D Automatic ice maker When ice has been
produced, you will hear ice cubes falling into the
ice bin. Ice maker fan, water valve activation, and
refrigerant gas fluid may create sounds from
its operation.
E Electronic control & automatic defrost
control These parts can produce a snapping or
clicking sound when turning the cooling system on
and off.
F Condenser fan You may hear air being forced
through the condenser.
G Compressor Modern, high-efficiency compressors
run much faster than older models. The
compressor may have a high-pitched hum or
pulsating sound.
H Water valve Makes a buzzing sound each time it
opens to fill the ice maker.
I Drain pan (not removable) You may hear water
dripping into the drain pan during the defrost cycle.
J Condenser May create minimal sounds from
forced air.
M Motorized damper May produce a light humming
during operation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE FILTER
Locating the Filters
Your refrigerator is equipped with water filtering system.
The water filter system filters all dispensed drinking
water, as well as the water used to produce ice.
More about your Advanced Water Filter
The PureSource UltraTM ice and water filter
system is tested and certified to NSF/ANSI
Standards 42 and 53 for the reduction of claims
specified on the performance data sheet.
Water Filter
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
The water filter is located at the top right side of the
fresh food compartment.
Replacing the Water Filter
In general, you should change the water filter every six
months to ensure the highest possible water quality. The
Water Filter Status light on the user interface prompts
you to replace the filter after a standard amount of water
(200 gallons/757 liters for PureSource UltraTM)has
flowed through the system. The water filter status light
on this model is not performance tested or certified
by NSF.
Test & certification results:
• Rated Capacity - 200 gallons/757 liters for
PureSource UltraTM ice and water filter
•
Rated service flow - .50 gallons per minute
• Operating Temp.: Min. 33°F, Max. 100°F
• Maximum Rated Pressure - 100 pounds per
square inch
If your refrigerator has not been used for a period of time
(during moving for example), change the filter before
reinstalling the refrigerator.
• Recommended Minimum Operating Pressure: 30
pounds per square inch
TM
To replace your PureSource Ultra water filter:
Filter Cartridge
It is not necessary to turn the water supply off to change
the filter. Be ready to wipe up any small amounts of water
released during the filter replacement.
1 Turn Off the ice maker by raising the wire signal arm.
2
3
4
Remove the filter by pushing on the end/face of
the filter.
Slide the old water filter cartridge straight out of the
housing and discard it.
Unpackage the new filter cartridge. Using the
alignment guide, slide it gently into the filter housing
until it stops against the snap-in connector at the
back of the housing.
Ordering Replacement Filters
To order your replacement filters, please visit our online
at 877-808-4195, or by visiting the dealer where you
purchased your refrigerator. Frigidaire recommends
that you order extra filters when you first install your
refrigerator, and that you replace your filters at least once
every six months.
5 Push firmly until the cartridge snaps into
place (you should hear a click as the cartridge
engages the snap-in connector).
6 Turn On the ice maker by lowering the wire signal arm.
7 Press and hold the Water Filter button on the
Ice & Water Dispenser control panel for three
seconds. When the display changes from Red to
Green, the status has been reset.
Here is the product number to request when ordering:
PureSource UltraTM Water Filter
Part #ULTRAWF
8 After replacing the water filter and in order for the ice
maker to work properly, it is necessary to clear air from
water filter tubing. Once ice maker begins making ice,
allow the bucket to fill completely, then discard the
first TWO FULL buckets of ice. It will take at least two
days to completely fill the bucket on regular ice making
mode or 1½ days on fast ice mode.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE FILTER
Air filter (select models)
The air filter is located under the utility bin.
Replacing your PureAdvantageTM air filter
To ensure optimal filtering of refrigerator odors, you
should change the air filter every six months (the filter
status light on the Touch Panel prompts you to replace
the filter after six months).
1
2
3
4
Open the air filter door.
Remove the old filter and discard it.
Unpack the new filter and slide it into the housing.
To close the air filter door, push the top and bottom
to lock the door closed.
5 Press and hold the Air Filter Reset button on the
control panel for three seconds. When the display
changes from “Replace” to “Good,” the status has
been reset.
6 The Air Filter Reset will turn itself off after a
few seconds.
Ordering replacement filters
Order new filters by calling 877-808-4195, online at
you bought your refrigerator. You may want to consider
ordering extra filters when you first install your refrigerator.
Air Filter Replacement cartridge, part #PAULTRA
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
Protecting your investment
Keeping your refrigerator clean maintains its appearance and prevents odor build-up. Wipe up any spills immediately
and clean the freezer and fresh food compartments at least twice a year.
NOTE
Do not use abrasive cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches, or cleansers containing petroleum products on plastic parts, interior doors,
gaskets, or cabinet liners. Do not use paper towels, scouring pads, or other abrasive cleaning materials.
• Never use metallic scouring pads, brushes, abrasive cleaners, or strong alkaline solutions on any surface.
• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Do not wash any removable parts in a dishwasher.
• Always unplug the electrical power cord from the wall outlet before cleaning.
NOTE
If you set your temperature controls to turn off cooling, power to lights and other electrical components will continue
until you unplug the power cord from the wall outlet.
• Remove adhesive labels by hand. Do not use razor blades or other sharp instruments which can scratch the
appliance surface.
• Do not remove the serial plate. Removal of your serial plate voids your warranty.
• Before moving your refrigerator, raise the anti-tip brackets so the rollers will work correctly. This will prevent the
floor from being damaged.
CAUTION
• Pull the refrigerator straight out to move it. Shifting it from side to side may damage flooring. Be careful not to
move the refrigerator beyond the plumbing connections.
• Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
IMPORTANT
If you store or move your refrigerator in freezing temperatures, be sure to completely drain the water supply
system. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service
representative to perform this operation.
Refer to the guide on the next page for details on caring and cleaning specific areas of your refrigerator.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
Care and cleaning tips
Part
Cleaning Agents
Tips and Precautions
Interior &
• Soap and water
• Use two tablespoons of baking soda in one quart of warm water.
Door Liners
• Baking soda and
• Be sure to wring excess water out of sponge or cloth before cleaning
water
around controls, light bulb or any electrical part.
Door Gaskets
• Soap and water
• Wipe gaskets with a clean soft cloth.
Drawers &
Bins
• Soap and water
• Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins, drawers, etc.) in dishwasher.
• Allow glass to warm to room temperature before immersing in warm
water.
Glass Shelves • Soap and water
• Glass cleaner
• Mild liquid sprays
• Soap and water
Toe Grille
• Remove toe grille (see Installation Instructions).
• Mild liquid sprays • Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
• Vacuum
Exterior &
Handles
• Soap and water
• Do not use commercial household cleaners containing ammonia, bleach or
alcohol to clean handles.
• Non abrasive
glass cleaner
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
Exterior &
Handles
(Stainless
Steel Models
Only)
• Soap and water
• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Stainless steel
• Clean stainless steel front and handles with non-abrasive soapy water and
cleaners
a dishcloth. Rinse with clean water and a soft cloth.
• Use a non-abrasive stainless steel cleaner. These cleaners can be
purchased at most home improvement or major department stores.
Always follow manufacturer’s instruction. Do not use household cleaners
containing ammonia or bleach.
• NOTE: Always clean, wipe and dry with grain to prevent scratching.
• Wash the rest of the cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
Vacation and moving tips
Occasion
Tips
Short Vacations
• Leave refrigerator operating during vacations of three weeks or less.
• Use all perishable items from refrigerator compartment.
• Turn automatic ice maker off and empty ice bucket, even if you will only be gone a few days.
• Remove all food and ice if you will be gone one month or more.
Long Vacations
• Turn the cooling system off (see “Controls” section for location of On/Off button) and
disconnect power cord.
• Turn water supply valve to closed position.
• Clean interior thoroughly.
• Leave both doors open to prevent odors and mold build-up. Block doors open if necessary.
Moving
• Remove all food and ice.
• If using a handcart, load from the side.
• Adjust rollers all the way up to protect them during sliding or moving.
• Pad cabinet to avoid scratching surface.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
Ordering Replacement LED Lights
Replacing LED Lights (select models)
Order new LEDs by calling 877-808-4195, online at
you bought the refrigerator. Here is the product number
to request when ordering:
The fresh food compartments of your refrigerator may have
LED lights. Always use Frigidaire parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator’s power cord.
2 Remove lens cover.
LED Light, Part #242196201
3 Remove LED board.
4 Replace LED board and snap in place assuring the
light is facing in toward the unit (inside fresh food).
5 Replace lens cover.
Lens Removal
LED Light Board Removal
NOTE
LED lights are in series so if one is bad or unplugged,
several lights may not light up.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
Visit our web site at
CONCERN POTENTIAL CAUSE
AUTOMATIC ICE MAKER
COMMON SOLUTION
Ice maker is not
making any ice.
• Ice maker power switch is Off. • Turn power switch to On (“I”) position.
• Ice maker has small cube
• Remove small cube from ice maker. The ice and water
caught in mechanism.
filter cartridge may be clogged. Replace filter cartridge.
• Saddle valve on cold water
pipe is clogged or restricted
by foreign material.
• Turn off household water line valve. Remove valve.
Ensure that valve is not a self-piercing saddle valve.
Clean valve. Replace valve if necessary.
Ice maker is not
making enough ice.
• Ice maker is producing less
• The ice maker produces approximately four pounds
ice than you expect.
of ice every 24 hours depending on usage conditions.
• Check to see if water
dispenser is dispensing
slower than normal.
•
If it is, replace the ice and water filter cartridge.
• Freezer control is set too
• Set freezer control to colder setting to improve
performance of the ice maker (freezer ice maker).
Allow 24 hours for temperature to stabilize.
warm (freezer ice maker).
Ice maker will not
stop making ice.
• Ice maker wire signal arm
is being held down by some
item in the freezer.
• Move item and release wire signal arm. Remove
any ice cubes that are frozen together over the wire
signal arm.
Ice cubes are
freezing together.
• Ice cubes are not being
• Remove ice container and discard ice from container.
used frequently enough.
Ice maker will produce fresh supply.
• Ice cubes are hollow
(partially frozen cubes with
water inside).
•
The ice and water filter cartridge may be clogged.
Replace filter cartridge.
• Freezer control is set
• Set freezer control to colder setting. Allow 24 hours
too warm.
for temperature to stabilize.
OPENING/CLOSING OF DOORS/DRAWERS
Door(s) will not
close.
• Door was closed too hard,
• Close both doors gently.
causing other door to
open slightly.
• Refrigerator is not level.
It rocks on the floor when
moved slightly.
•
•
Ensure floor is level and solid, and can adequately
support the refrigerator. Contact a carpenter to
correct a sagging or sloping floor.
• Refrigerator is touching a
Ensure floor is level and solid, and can adequately
support the refrigerator. Contact a carpenter to
correct a sagging or sloping floor.
wall or cabinet.
Drawers are difficult • Food is touching shelf on
• Remove top layer of items in drawer.
to move.
top of drawer.
• Track that drawers slide on
• Ensure drawer is properly installed on track.
is dirty.
• Clean drawer, rollers, and track. See Care & Cleaning.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL (CONTINUED)
CONCERN
POTENTIAL CAUSE
COMMON SOLUTION
RUNNING OF REFRIGERATOR
Compressor does not
run.
• Freezer control is set to “OF”
or “0”.
• Set freezer control.
• Refrigerator is in defrost cycle. • This is normal for a fully automatic defrost refrigerator. The
defrost cycle occurs periodically, lasting about 30 minutes.
• Plug at electrical outlet
• Ensure plug is tightly pushed into outlet.
is disconnected.
• House fuse blown or tripped
• Check/replace fuse with a 15 amp time-delay fuse.
circuit breaker.
Reset circuit breaker.
• Power outage.
• Check house lights. Call local electric company.
Refrigerator runs too
much or too long.
• Room or outside weather
• It’s normal for the refrigerator to work longer under
is hot.
these conditions.
• Doors are opened too
• Warm air entering the refrigerator causes it to run more.
frequently or too long.
Open doors less often.
• Fresh Food/freezer door may
• Ensure refrigerator is level. Keep food and contains
from blocking door. See CONCERN column OPENING/
CLOSING OF DOORS/DRAWERS.
be slightly open.
• Freezer control is set too cold. • Set Fresh Food control to warmer setting until
refrigerator temperature is satisfactory. Allow 24 hours
for temperature to stabilize.
• Fresh Food/freezer gasket is
dirty, worn, cracked, or
poorly fitted.
• Clean or change gasket. Leaks in door seal will cause
refrigerator to run longer in order to maintain
desired temperatures.
• Condenser is dirty.
• Clean condenser. See Care & Cleaning.
Compressor goes off
and on frequently.
• Thermostat keeps the
refrigerator at a
• This is normal. Refrigerator goes on and off to keep
temperature constant.
constant temperature.
DIGITAL TEMPERATURE DISPLAY
Digital temperature
displays are flashing.
• Electronic control system has
• Call your Frigidaire service representative, who can
interpret any messages or number codes flashing on the
digital displays.
detected a
performance problem.
WATER/MOISTURE/FROST INSIDE REFRIGERATOR
Moisture collects on
inside of refrigerator
walls.
• Weather is hot and humid.
• The rate of frost buildup and internal sweating increases.
• Door is slightly open.
• See CONCERN column OPENING/CLOSING OF
DOORS/DRAWERS.
Water collects on
bottom side of drawer
cover.
• Vegetables contain and give
• It is not unusual to have moisture on the bottom side of
off moisture.
the cover.
• Move humidity control (some models) to lower setting.
Water collects in
bottom of drawer.
• Washed vegetables and fruit
• Dry items before putting them in the drawer. Water
drain while in the drawer.
collecting in bottom of drawer is normal.
WATER/MOISTURE/FROST OUTSIDE REFRIGERATOR
Moisture collects
on outside of
refrigerator or
between doors.
• Weather is humid.
• This is normal in humid weather. Press Energy Saver
icon to reduce exterior moisture on the cabinet between
the doors. When humidity is lower, the moisture should
disappear and the Energy Saver icon can be pressed
again to turn it off.
• Door is slightly open, causing
cold air from inside refrigerator
to meet warm air from outside.
• See CONCERN column OPENING/CLOSING OF
DOORS/DRAWERS.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove
to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
This warranty does not cover the following:
Exclusions
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc.,which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
If You Need
Service
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described
or illustrated are subject to change without notice.
USA
1.800.944.9044
Frigidaire
10200 David Taylor Drive
Charlotte, NC 28262
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|