T H E S O U N D T H A T C R E A T E S L E G E N D S
BroncoAmp
TYPE:PR258
,
OwnersManual
P/N 047277
Download from Www.Somanuals.com. All Manuals Search And Download.
BroncoFrontPanelFunctions
DRIVE
SELECT
6
6
6
6
6
6
5
8
5
8
5
8
5
8
5
8
5
8
4
9
4
9
4
9
4
9
4
9
4
9
3
10
11
3
10
11
10
11
3
10
11
3
10
11
3
10
11
3
2
2
2
2
2
2
1
12
1
12
1
12
1
12
1
12
1
12
NORMAL
DRIVE
INPUT
GAIN
TREBLE
MIDDLE
BASS
VOLUME
VOLUME
A
B
C
D
E
F
G
H
I
A. INPUT — A high impedance, high sensitivity plug-in
H. BASS — Adjusts the amount of boost or cut in the low
connection for instruments.
frequency range.
B. NORMAL VOLUME — Adjusts the overall loudness of the
I.
POWER INDICATOR –– When this indicator is illuminated the
Normal Channel.
Bronco is receiving AC power.
C. GAIN — Adjusts the amount of preamp amplification in the
Drive Channel. Cleaner sound is achieved at lower gain
settings; high gain settings will produce more sustain and
distortion. This control works in conjunction with the DRIVE
VOLUME control (item E) to set the overall loudness of the
Drive Channel.
J.
POWER SWITCH — This switch turns the AC power ON and
OFF. When the switch is OFF the amplifier is completely shut
down.
K. HEADPHONES — This jack provides an output to standard
stereo or mono headphones for private listening. NOTE: Use
of this jack automatically disables the speaker. CAUTION:
Prolonged listening at high levels may be hazardous to your
hearing! This jack can also be used as an unbalanced line
output by using either a stereo or mono 1/ 4 inch phone plug
connection.
D. DRIVE SELECT — Activates the Drive Channel.
E.
F.
DRIVE VOLUME — Adjusts the overall loudness of the Drive
Channel.
TREBLE — Adjusts the amount of boost or cut in the high
L.
EXTERNAL SPEAKER –– This jack provides an output to an
external speaker enclosure. The enclosure must have a
minimum impedance of 8Ω. Use of this jack automatically
disables the internal speaker. DO NOT PLUG HEAD
PHONES IN HERE.
frequency range.
G. MIDDLE — Adjusts the overall tone quality without affecting
the signal level. High MIDDLE settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of most
“metal” music.
LINE CORD –– This amplifier is equipped with a grounding type
supply cord to reduce the possibility of shock hazard. Be sure to
connect it to a grounded receptacle. DO NOT ALTER THE AC
PLUG.
8Ω MIN. EXT.
SPEAKER
Download from Www.Somanuals.com. All Manuals Search And Download.
BroncoSpecifications
PART NUMBER:
120V VERSION: 22-3104
230V VERSION: 22-3164
INPUT IMPEDANCE:
Greater than 1 Meg Ohm
100 mV
NOMINAL INPUT LEVEL:
POWER OUTPUT:
15 Watts R.M.S.
8 Ohms
RATED LOAD IMPEDANCE:
POWER REQUIREMENTS:
120V VERSION: 120 VAC 60 Hz., .28A Max.
230V VERSION: 230 VAC 50 Hz., .14A Max.
SPEAKER COMPLEMENT:
DIMENSIONS:
One 8 Ohm Special Design 8” Speaker (P/ N 025421)
Height: 12”
(30.5 cm)
(34.3 cm)
(19.1cm)
Width: 13-1/ 2”
Depth: 7-1/ 2”
WEIGHT:
SOUND:
14 lbs.
(6.4kg)
Unbelievable!!
WARNING:
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 9 1 7 2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
|